Add driver model support by using the uclass UCLASS_USB_GADGET_GENERIC.
Disable local usb_gadget_register_driver()/usb_gadget_unregister_driver()
implementation which is implemented in udc-core.c when DM_USB_GADGET
is enabled.
Replace dm_usb_gadget_handle_interrupts() with handle_interrupts ops
when DM_USB_GADGET is enabled.
Disable legacy struct usba_udc controller as controller point is extracted
from udevice private data with DM.
Disable legacy usba_udc_probe() to avoid conflict with DM when it's
enabled.
Compared to Linux driver only supported devices' DT bindings are included
(sorted as Linux driver)
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240725153204.358925-8-admin@hifiphile.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Simon Glass <sjg@chromium.org> says:
This series includes fixes to get some rockchip and nvidia boards
working again. It also drops the broken Beaglebone Black config and
provides a devicetree fix for coral (x86).
The code here is confusing due to large blocks which are #ifdefed out.
Add a function phase_sdram_init() which returns whether SDRAM init
should happen in the current phase, using that as needed to control the
code flow.
This increases code size by about 500 bytes in SPL when the cache is on,
since it must call the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.
This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
On some boards, the bloblist is created in SPL once SDRAM is ready. It
cannot be accessed until that point, so is not available early in SPL.
Add a condition to avoid a hang in this case.
This fixes a hang in chromebook_coral
Fixes: 70fe238594 ("fdt: Allow the devicetree to come from a bloblist")
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Raymond Mao <raymond.mao@linaro.org>
There is no need to remove input files. It makes it harder to diagnose
failures. Keep the payload file.
There is no test for this condition, but one could be added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The tool must return an error code when invalid arguments are provided,
otherwise binman has no way of knowing that anything went wrong.
Correct this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: fab430be2f ("tools: add mkeficapsule command for UEFI...")
Tools cannot be assumed to be present. Add a check for this with the
mkeficpasule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: b617611b27 ("binman: capsule: Add support for generating...")
Tools should have an option to obtain the version, so add this to the
mkeficapsule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This change adds support for PCIe connected nvme disk - phyBOARD-Polis
base board.
One needs to call following commands in u-boot:
> pci enum
> nvme scan
> nvme info
And then ones to access proper file system (like fat[ls|load|write],
ext4[ls|load|write]).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Enable the 'cpu' command to display the CPU info and release CPU core to
run baremetal or RTOS applications.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Enable the 'cpu' command and the depended imx CPU driver to
display the CPU info and release CPU core to run baremetal
or RTOS applications.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Add documentation for the 'cpu' command, taking NXP i.MX 8M Plus
as a example.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a new subcommand 'release' to bring up a core to run baremetal
and RTOS applications.
For example on i.MX8M Plus EVK, release the LAST core to run a RTOS
application, passing the sequence number of the CPU core to release,
here it is 3:
u-boot=> cpu list
0: cpu@0 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
1: cpu@1 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 30C
2: cpu@2 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
3: cpu@3 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
u-boot=> load mmc 1:2 c0000000 /hello_world.bin
66008 bytes read in 5 ms (12.6 MiB/s)
u-boot=> dcache flush; icache flush
u-boot=> cpu release 3 c0000000
Released CPU core (mpidr: 0x3) to address 0xc0000000
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Increase one more bit to cover all CPU types. Otherwise it shows
wrong CPU info on some platforms, such as i.MX8M Plus:
U-Boot 2024.04+g674440bc73e+p0 (Jun 06 2024 - 10:05:34 +0000)
CPU: NXP i.MX8MM Rev1.1 A53 at 4154504685 MHz at 30C
Model: NXP i.MX8MPlus LPDDR4 EVK board
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Add a new callback release_core to the cpu_ops, which is used to
release a CPU core to run baremetal or RTOS application on a SoC
with multiple CPU cores.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Register ARM A53 core clock for i.MX 8M Mini, Nano and Plus, preparing
for enabling the 'cpu' command, which depends on this to print CPU core
frequency.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Instead of using the local imx7s-warp devicetree copies from U-Boot,
convert the imx7s-warp board to OF_UPSTREAM so that the upstream
kernel devicetree can be used instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Print clk name in clk_enable and clk_disable. Make sense to know
what clock get disabled/enabled before a system crash or system
hang.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The function returns the rate of the parent clock, the previous text
made no sense at all.
Fixes: 4aa78300a0 ("dm: clk: Define clk_get_parent_rate() for clk operations")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
This series doesn't currently change anything and it does add all the
additional OPs to make support of OF_UPSTREAM.
While converting the mt7681/7686/7688/7623/7622 it was notice lots of
discrepancy between the downstream dtsi and the upstream one and the
clock ID between downstream clock ID and upstream clock ID.
Upstream reference clock by names and clock are handled by the
CCF (Common Clock Framework). The same can't be used here as we would
quickly reach the max space allocated before relocation.
The current mediatek clock driver reference all the parents and clocks
with offset from the clk ID related to the different tables.
Discrepancy between clock ID and the order in the clocks table cause
one clock referenced for another or even crash for trying to access
a clock at an offset that doesn't exist.
To handle this and permit use of OF_UPSTREAM, various measure and
changes are done to the mediatek clock driver to support it.
This series have all the generic clock changes. Once this is merged,
series for each SoC will came that will just change files in their
dedicated clock driver. This is to prevent massive patch and to
permit to split series, one for each SoC.
As said at the start, these changes doesn't cause regression and are
just expansion to the current API. Current behaviour is saved in every
possible way (aside from the first 2 patch that fixes latent bugs)
Add support for APMIXED parent in infra MUX. This is the case for mt7622
that reference APMIXED parents for the MUX1_SEL clock.
We assume the second level parent is always APMIXED.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for GATEs for APMIXED OPs. It's possible that some APMIXED
have also gates on top of PLL. This is the case for mt7622. Add support
for this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Some simple MUX might require flags to specify the parent source.
Implement MUX_FLAGS as a variant of the MUX macro that takes custom
flags as last arg.
Also implement MUX_MIXED_FLAGS for PARENT_MIXED implementation and
MUX_MIXED with no additional flags.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux might have a different clock ID order in their
<soc>-clk.h header. This is the case of some clock ID for mt7623 that
upstream use the shared header clk-mt7601.h
This header doesn't have a well distincted order and have factor or mux
in the middle of the CLK ID list. This is problematic with the mtk clock
driver that expect everything well organized in block and apply offset
to reference the clk in the different array.
To solve this problem, implement in the mtk_clk_tree an additional
option .id_offs_map, an array where each CLK ID can be remapped to what
the driver expect permitting to reorganize the clock following the
expected logic of fixed, factor, mux and gates.
Each clock function is updated to tranparently handle this by first
converting the clk ID to the remapped one.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Provide common clk init function for infrasys that defaults to topckgen
driver if clock-parent is not defined. This is the case for upstream
DTSI that doesn't provide this entry.
This is needed for infracfg driver that will make use of the unified
gates + muxes implementation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for gate clock get_rate to reference topckgen clock for
infracfg-ao implementation.
In infracfg-ao implementation topckgen is on second level of parent with
infracfg in the middle.
To correctly detect this, check the driver of the dev parent and use the
second level parent if it's not mtk_clk_topckgen.
Due to all the dependency, parent tree must be filled before a gate is
used, hence is safe to assume it will be there.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
As done for infracfg, also add support for parent mux from different
source for topckgen. This is needed as upstream linux doesn't use 1/1
factor and use directly the APMIXED clocks.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
There is a current limitation where parents for a mux can be all declared
as they are from a common source. This is not true as there are some MUX
that can have parent from both infracfg or from topckgen.
To handle this, implement a new flag for the mux, CLK_PARENT_MIXED, and
a new entry for the mux parent_flags.
To use this, CLK_PARENT_MIXED must be used and parent_flags will be used
instead of the parent variable.
Entry in parent_flags are just a struct of ID and flags where it will be
defined where that parent comes from with the usage of
CLK_PARENT_INFRASYS or CLK_PARENT_TOPCKGEN.
This permits to have MUX with parents from infracfg or topckgen.
Notice that with CLK_PARENT_MIXED applied the CLK_BYPASS_XTAL is
ignored.
With CLK_PARENT_MIXED declare CLK_PARENT_XTAL for the relevant parent
instead.
Also alias for the CLK_PARENT macro are provided to better clear their
usage. CLK_PARENT_MIXED require these alias that describe the clk type
to be defined in the clk_tree flags to prevent clk ID clash from
different subsystem that may have equal clk ID.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
