This is used by some boards in U-Boot and is a convenient way to deal
with common settings where using a Kconfig files is not desirable.
Detect #include files and process them as if they were part of the
original file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: https://source.denx.de/u-boot/custodians/u-boot-dm/-/issues/30
This code is tested by test_scan_defconfigs() but it is useful to have
some specific tests for the KconfigScanner's operation in U-Boot. Add
a test which checks that the values are obtained correctly.
Signed-off-by: Simon Glass <sjg@chromium.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/23430
- Prepare for implementing the EFI_HTTP_PROTOCOL:
- Make wget functionality callable even if the wget command is not
built (add CONFIG_WGET symbol).
- Ensure that wget_with_dns() works the same with the old network
stack and with lwIP.
- Put server_name and port into wget_ctx.
- Integrate struct wget_info into wget code.
- Move ip_to_string to lib/net_utils.c
The function string_to_ip is already in net_utils, which is
compiled unconditionally, but ip_to_string is currently only
accessible if the legacy network stack is selected. This
commit puts ip_to_string in net_utils.c and removes it from the
legacy network code.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Currently, MMC test runs on default mmc modes, adding a provision to
support multiple mmc modes through user defined parameters.
Signed-off-by: Love Kumar <love.kumar@amd.com>
'usb part' command shows the partition maps and shows the partition type
by displaying number such as 0c, 83 etc. Observed that ext2 and ext4
partitions shows the same number, i.e, 83, so, using the fstype command
to distiniguish between ext2 and ext4 partitions.
Signed-off-by: Love Kumar <love.kumar@amd.com>
'mmc part' command shows the partition maps and shows the partition type
by displaying number such as 0c, 83 etc. Observed that ext2 and ext4
partitions shows the same number, i.e, 83, so, using the fstype command
to distiniguish between ext2 and ext4 partitions.
Signed-off-by: Love Kumar <love.kumar@amd.com>
The lowlevel debug with CONFIG_DEBUG_UART has printascii for string
print, and no need to convert to use printch now.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Usually ARMv8 platforms allow unaligned access for Normal memory. But
some chips might not allow it by default, having SCTLR.A bit set to 1
before U-Boot execution. One such example is Exynos850 SoC. As
allow_unaligned() is not implemented for ARMv8 at the moment, its __weak
implementation is used, which does nothing. That might lead to unaligned
access abort, for example when running EFI selftest. Fix that by
implementing allow_unaligned() for ARMv8.
The issue was found when running EFI selftest on E850-96 board
(Exynos850 based):
=> bootefi selftest $fdtcontroladdr
...
Executing 'HII database protocols'
"Synchronous Abort" handler, esr 0x96000021, far 0xbaac0991
...
resetting ...
Unaligned abort happens in u16_strnlen(), which is called from
efi_hii_sibt_string_ucs2_block_next():
u16_strlen(blk->string_text)
where 'blk' type is struct efi_hii_sibt_string_ucs2_block. Because this
struct is packed, doing "->string_text" makes 'blk' address incremented
by 1 byte, which makes it unaligned. Although allow_unaligned() was
called in efi_init_early() before EFI selftest execution, it wasn't
implemented for ARMv8 CPUs, so data abort happened.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Some of the bootm tests rely on state that is assumed to be
correct but is changed by the tests. This means that running
'ut bootm' twice will result in failures on the second run
as the state left by the first run is not what the tests
expect.
Fix this by ensuring the state is as expected by explicitly
setting that state.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
We are about to add a large number of new entries. Update the prefix to
be a little shorter.
For SMBIOS items, use SYSID_SM_ (for System Management) which is enough
to distinguish it. For now at least, it seems that most items will be
for SMBIOS.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Raymond Mao <raymond.mao@linaro.org>
When compiling with X86EMU_DEBUG, the compiler complains that debug.c misses
two include files. Fix that.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net>
Currently the PM_{inp,outp}* macros are completely broken on non-x86 architectures,
because they will essentially access random memory locations if called (and produce
a lot of rightful compilation warnings too). For now, replace those macros with
warnings (until the code is fixed), so the user at least knows that the emulator
attempted to access some x86 I/O port.
Signed-off-by: Yuri Zaporozhets <yuriz@qrv-systems.net>
These fields are currently set on exactly two platforms today, and used
by only one of them. Update pic32mzdask to use CFG_SYS_SRAM* in the one
location it needs it and otherwise drop this field from the bd_info
struct.
Signed-off-by: Tom Rini <trini@konsulko.com>
We don't have audio support in U-Boot, but we do have boot menus. Add an
option to re-map the volume and power buttons to up/down/enter so that
in situations where these are the only available buttons (such as on
mobile phones) it's still possible to navigate menus built in U-Boot or
an external EFI app like GRUB or systemd-boot.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Each wget request now fills the struct wget_info. Also, the
efi bootdevice is now set conditionally to the set_bootdevice
variable in wget_info and a buffer size check is performed if
check_buffer_size is set.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Currently server_name and port are local variables in wget_loop.
This commit puts them inside ctx, so that they are accessible
from the http callbacks.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
There are two wget_with_dns functions, one in the legacy network
stack and one in lwip, but the return values are not compatible.
This commit modifies the legacy version of wget_with_dns so that
the return values are compatible: 0 on success, otherwise a negative
error. This way wget_with_dns can be called in a network stack
agnostic way.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Each wget request now fills the struct wget_info. The efi
bootdevice is now set conditionally to the set_bootdevice
variable in wget_info, and the same holds for lmb memory check.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Declare and define a global default struct wget_http_info
and an interface to issue wget requests providing a custom
struct wget_http_info. This code is common to legacy wget
and lwip wget. The idea is that the command wget should use
the default wget_http_info and other internal u-boot code
can call wget_request with their own wget_http_info struct.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
The struct wget_http_info exposes the HTTP information of the last HTTP
request issued by wget, and it controls whether the efi bootdevice is set,
and whether the buffer size needs to be checked (lwip stack only). This
information is otherwise discarded. The wget_http_info struct can be used
by HTTP drivers to have more control over HTTP requests.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Let net/wget.c and net/lwip/wget.c depend on CONFIG_WGET, and
cmd/wget.c depend on CONFIG_CMD_WGET. This way, the wget code
can be used regardless of whether the wget command is available.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Rasmus Villemoes <ravi@prevas.dk> says:
Doing bringup of a board, part of my bootstrap logic is in U-Boot. So
when tweaking that logic, I was bitten by a previous completed
bootstrap having left a copy of the environment on the device, which
was imported and thus overrided the new logic.
So I thought, "ok, I'll just make sure to put 'env default -a' as the
first part of the bootstrap logic so I'm not bitten again". Alas, my
logic also relies on certain variables that are set by C code
(e.g. for detecting board variant), and doing 'env default -a' also
eliminates those.
Looking around, the hashtab code already supports a flag that does
exactly what I need, and exposing that is (morally) a one-liner.
Link: https://lore.kernel.org/r/20241030213404.2894247-1-ravi@prevas.dk
Check that the new -k flag works as expected.
This also adds a test of the -a flag, which was previously missing,
and as the comment says, perhaps for a good reason. At least now we
have a test for it in combination with -k (and -f, because the ethaddr
variables otherwise cause complaining).
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Instead of testing the same expected behaviour for both
non_default_varX, test that when var1 is not in the default env but is
mentioned in the "env default" cmdline, it is removed, while var2 is
untouched.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
It can be useful to set all variables defined in the default
environment to the value they have there, but without removing
variables that are only defined at runtime. This can sort-of be done
today, by using the "env default var1 var2 ..." variant, but that
requires listing all variables defined in the default
environment. It's much more convenient to be able to say
env default -k -a
The -k flag is also meaningful in the other case: If var1 is not
defined in the default environment, but var2 is,
env default var1 var2
would emit a warning about var1 not being in the default env and thus
being deleted. With -k, there's no warning, and var1 is kept as-is.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
For Amlogic A1, we have to use dtsi from dts/upstream folder.
The only difference between this two files is the added cpu temperature
node definition in upstream version and additional assigned-clock for
USB. This patch is tested on a device with A113L SoC (AD401-like) and
everything is okay.
So, we can remove legacy arch/arm/dts/meson-a1.dtsi file.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Link: https://lore.kernel.org/r/20241112125836.3239832-2-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Janne Grunau <j@jannau.net> says:
The changes in "Make LMB memory map global and persistent" [1] break
mapping DMA memory in the USB xHCI driver when using the apple_dart
iommu present on Apple silicon systems.
The IOVA space used by the u-boot driver (low 4GB) and physical memory
do not overlap. The physical memory on this systems starts depending on
the SoC either at 0x10_0000_0000 or 0x100_0000_0000. It make no sense to
manage these distinct regions in a single LMB map. In addition every
device has its own iommu and IO address space so sharing a single memory
map between all iommu instances is not necessary.
To fix this issue restore the used subset (add, alloc and free) of the
previous pointer based LMB interface with "io_" as prefix.
To ensure that low level lmb functions do not use the global LMB
variable reorder lib/lmb.c so that the variable is not visible.
Tested with patches from my "Fix device removal order for Apple dart
iommu" series [2] to fix a separate issue.
The cosmetic commit has two checkpatch warnings in existing code which I
ignored.
[1] https://lore.kernel.org/u-boot/20240826115940.3233167-1-sughosh.ganu@linaro.org/
[2] https://lore.kernel.org/u-boot/20241031-iommu_apple_dart_ordering-v1-0-8a6877946d6b@jannau.net/
Link: https://lore.kernel.org/r/20241111-io_lmb_apple_dart_iommu-v3-0-32c05da51d72@jannau.net
Signed-off-by: Tom Rini <trini@konsulko.com>
There is no overlap between the IOVA space managed by the iommu (here
the 32-bit address space) and physical RAM on Apple silicon systems. The
RAM starts at 0x10_0000_0000 or 0x100_0000_0000 so it's not possible to
manage the IOVA with the global memory LMB and use 1:1 translation.
In addition each device has its own iommu and does not need to share the
address space with all other devices. This should not be problem for
u-boot's limited use and hardware support.
Restore the private per instance LMB IOVA map.
Fixes: ed17a33fed ("lmb: make LMB memory map persistent and global")
Signed-off-by: Janne Grunau <j@jannau.net>
These functions can be used with struct lmb pointers and will be used to
manage IOVA space in the apple_dart iommu driver. This restores part of
the pointer base struct lmb API from before commit ed17a33fed ("lmb:
make LMB memory map persistent and global").
io_lmb_add() and io_lmb_free() can trivially reuse exisiting lmb
functions. io_lmb_setup() is separate for unique error log messages.
io_lmb_alloc() is a simplified copy of _lmb_alloc_base() since the
later has unused features and internal use of the global LMB memory map.
Signed-off-by: Janne Grunau <j@jannau.net>
Low lovel LMB functionality will be used to manage IOVA space in the
Apple dart iommu driver. This reordering ensures that those function
can not access the global LMB memory map variable.
Signed-off-by: Janne Grunau <j@jannau.net>
It will be re-used with a lmb list pointer as argument for IOVA
allocations in the apple_dart iommu driver.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Janne Grunau <j@jannau.net>
If TPL_GPIO and TPL_PINCTRL_ROCKCHIP are enabled and a sysreset-gpio is
provided in the TPL Device Tree, this will trigger a system reset
similar to what's currently been done in SPL whenever the RK3399 "warm"
boots. Because there's currently only one user of sysreset-gpio logic,
and TPL is enabled on that board, so let's migrate the logic and that
board to do it in TPL.
There are three reasons for moving this earlier:
- faster boot time as we don't need to reach SPL to be able to reset the
system on a condition we know is already met in TPL,
- have less code to be impacted by the issue this system reset works
around (that is, "unclean" SoC registers after a reboot),
- less confusion around the reason for restarting. Indeed when done from
SPL, the following log can be observed:
"""
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
Channel 0: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
Channel 1: DDR3, 666MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
256B stride
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45 +0100)
Trying to boot from MMC2
U-Boot TPL 2025.01-rc1-00165-gd79216ca9878-dirty (Nov 05 2024 - 15:31:45)
"""
possibly hinting at an issue within the SPL when loading the fitImage
from MMC2 instead of the normal course of events (a system reset).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This defines a weak tpl_board_init function that can be used for running
board/SoC-specific code before the DRAM init happens, similarly to
spl_board_init() for SPL.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
To prepare to support forcing power on reset from TPL which would have
the exact same logic, just in an earlier stage, let's merge the CRU
check that triggers the power on reset with the rest of the logic.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
A later commit will make use of the pinctrl driver in TPL so let's add
the ability to build the Rockchip pinctrl driver in TPL.
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Disable DISPLAY_BOARDINFO_LATE as the early boardinfo print of Model
should be enough.
U-Boot 2025.01-rc1 (Nov 02 2024 - 16:04:16 +0000)
Model: Generic RK3566/RK3568
DRAM: 8 GiB (effective 7.7 GiB)
Core: 250 devices, 24 uclasses, devicetree: separate
MMC: mmc@fe2b0000: 1, mmc@fe310000: 0
Loading Environment from nowhere... OK
In: serial@fe660000
Out: serial@fe660000
Err: serial@fe660000
Model: Generic RK3566/RK3568
Hit any key to stop autoboot: 0
=>
Enable CMD_MISC to make it easier to inspect data in OTP.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
