Remove SC5XX_UBOOT_SPL_OFFSET, SC5XX_UBOOT_OFFSET, SC5XX_FITIMAGE_OFFSET
and SC5XX_ROOTFS_OFFSET as they are no longer needed in the Kconfig.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add fdt_addr_r, kernel_addr_r, and ramdisk_addr_r to the SC5xx boards.
These variables are currently unused in the environment but will be
used in the future once support for booti commands is added to the
SC5xx boards.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Define the boot options for SC598 SOM EZ-LITE so the shared ADI boot
environment includes the expected boot commands for this board.
SC598 SOM EZ-LITE board environment utilizes the shared ADI boot
environment, but it does not define any of the USE_* boot mode selectors.
Without those selectors, the shared env does not generate the board boot
commands such as `spiboot`. This leaves the default `bootcmd=run spiboot`
without a matching environment command and breaks autoboot.
Fixes: c9e893d626 ("board: adi: Add support for SC598")
Signed-off-by: Ozan Durgut <ozan.durgut@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Remove the SC5XX_LOADADDR Kconfig option, replace its users with
CONFIG_SYS_LOAD_ADDR, and update the ADI boot environment to use
`loadaddr`.
SC5XX_LOADADDR was an ADI-specific duplicate of standard U-Boot
load address handling. U-Boot already uses CONFIG_SYS_LOAD_ADDR
for the default load address and `loadaddr` for boot commands,
so keeping separate SC5XX-specific names is redundant.
Signed-off-by: Ozan Durgut <ozan.durgut@analog.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Align configs to use the same default bootcommand. With the environment
no longer stored in the SPI, SPI boot is the intended default boot
method for all sc5xx platforms, with the exception of the sc573, and the
sc584.
The sc59x boards, the sc594 and the sc598, additionally have the option
of using OSPI for boot, but the default boot method for these boards is
still SPI.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update the bootargs used in SPI/OSPI bootmode
to reflect change from jffs2 to ubifs for the
SPI's filesystem, and remove the jffs2file variable
from the environment as it is now unused.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Update the load address for the image in
each environment to match the updated partitions
in Linux.
The partitions in Linux for the spi are named as follows:
- u-boot-spl
- u-boot
- kernel
- rootfs
The kernel partition is at 0x100000 for sc59x family boards,
and 0xd0000 for all other sc5xx boards.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Rename the SC573 EZKIT board to EZLITE across the device tree,
defconfig, board file, and related Kconfig/Makefile entries to
match with release naming. EZKIT was used internally before the
official product release.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The gige-reset line on the EZKIT was updated for the
sc598 but not the sc594. This commit aligns the two .dts
files since they are describing the same hardware, the
EZKIT carrier board.
Fixes: be7937847b ("board: adi: Add support for SC594")
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Remove preliminary binman support from all sc5xx ADSP boards.
Full support was never added because it was unused.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Switch the nfsboot and other relevant commands to use
wget instead of tftp. This also includes the addition of
the httpdstp variable for selecting the wget port.
There is no longer any automatic DHCP configuration. Before
running a command with wget, either 'dhcp' must be run or
the 'ipaddr' and 'serverip' variables must be set. Additionally,
the nfsboot command looks for the file named 'fitImage' on the
server to use to boot.
The default port is set to 8000 instead of the usual 80
to allow for use with an unprivileged web server.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update the default boot commands to match the expected
bootargs in Linux and new SPI partitioning scheme.
Because the environment is no longer stored in the SPI
flash, imagesize has been removed and replaced with a fixed
length read to load from the SPI. Additionally the partitions
of the mmc have been updated. The first partition holds the fitImage
at /fitImage, and the second partition contains the rootfs.
With this change, the imagefile environment variable has also been
eliminated, the image in the first partition is expected to always
be named fitImage.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Add CONFIG_SC5XX_LOADADDR to the sc59x family of
boards to set the default load address for the
loaded fit image. This value is autopopulated into
the environment variable loadaddr.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Remove the update_spi family of commands from the U-Boot
environment. These commands are not standard in U-Boot,
and boot media programming has moved to Linux, so the
commands can be safely removed.
Additionally, this commit removes the adi_stage2_offset,
adi_rfs_offset, imagefile, jffs2file, and init_ethernet variables that
were consumed by the update commands as they are no longer needed.
CONFIG_SC5XX_UBOOT_OFFSET and CONFIG_SC5XX_ROOTFS_OFFSET are also
removed.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Remove config option enabling storage of the environment
in the SPI flash, to match shift of programming boot media
to Linux.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
- Add myself as Maintainer of NVMe
- fix command ID wraparound handling
- apple: Check memalign return value
- Staticize and constify driver ops
- Fix PRP list pointer arithmetic for chained transfers
Endpoints should not be disabled on bus reset inside UDC driver,
otherwise a race condition will happen between gadget driver. Gadget
driver will free the requests and disable endpoints in disconnect ops.
Also remove outdated comment about it in usba_ep_disable().
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Fixes: 59310d1ecb ("usb: gadget: introduce 'enabled' flag in struct usb_ep")
Link: https://patch.msgid.link/20260515-udc_ep-v2-1-cd335b4e62e4@hifiphile.com
[mkorpershoek: removed empty newline between Fixes: and sob]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
The PRP setup code advances prp_pool using u64 pointer
arithmetic:
prp_pool += page_size;
This increments the pointer by page_size * sizeof(u64)
bytes instead of page_size bytes, resulting in invalid
PRP list addresses when multiple PRP list pages are
required.
The issue becomes visible for large transfers, typically
above 2 MiB when MDTS > 9.
Fix it by using byte-wise pointer arithmetic when
advancing to the next PRP list page.
Signed-off-by: Prashant Kamble <prashant.kamble223@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260518022535.17197-1-prashant.kamble223@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Pull request efi-2026-07-rc3
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/30152
Documentation:
* For reset command describe when the -edl option is available and fix a
typo.
UEFI:
* If efi_allocate_pages() is with EFI_ALLOCATE_ADDRESS fails, return
EFI_NOT_FOUND.
* Fix HII keyboard layout pointer computation and extend HII keyboard
layout tests.
Others:
* In reset command online help show -edl option only when enabled.
UBI updates for 2026.07-rc3
Fix from Peter:
- fs: ubifs: remove dead code
Fixes: d5888d509c ("fs: ubifs: fix bugs involving symlinks in ubifs_findfile")
(hs. correct the commit ID)
This code is dead because it appears after an infinite loop; remove it.
Fixes: d5888d509c ("fs: ubifs: fix bugs involving symlinks in ubifs_findfile")
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
hs: corrected the commit ID
The HII database test for keyboard layouts register two package lists with
two keyboard layouts each, but the test verifies only the GUID of the first
keyboard layout.
This does not catch the bugs happening with the keyboard layouts after the
first one in a package.
Verify all the keyboard layout GUIDs in the unit test to prevent this.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
The EFI_HII_KEYBOARD_LAYOUT field `layout_length' is expressed in bytes,
but we add it to the `layout' pointer with (scaled) pointer arithmetic.
When adding an HII keyboard package with multiple keyboard layouts, this
results in only the first layout being added correctly; fix it.
Fixes: 8d3b77e36e ("efi: hii: add keyboard layout package support")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: AKASHI Takahiro <akashi.tkhro@gmail.com>
The option is only available when CONFIG_SYSRESET_QCOM_PSCI is enabled,
so let's make that explicit in the boot cmd documentation.
Due to the implementation in drivers/sysreset/sysreset-uclass.c
do_reset() function, all options to the reset command are passed to all
sysreset drivers' sysreset_ops.request_arg callback (including -w) which
is only available when CONFIG_SYSRESET_CMD_RESET_ARGS=y. -w, however,
works also without this option.
Fixes: ef06c5d76f ("cmd: boot: Add '-edl' option to reset command documentation")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
"Do warm WARM" doesn't mean anything, I'm assuming the intent was to say
"Do WARM reset" so reword.
Fixes: 34e452dd02 ("doc: usage: Group all shell command docs into cmd/ sub-directory")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
edl is implemented in the sysreset_ops.request_arg callback of the
qcom-psci sysreset driver. That callback is only called from
sysreset_request_arg() which is compiled only when
CONFIG_SYSRESET_CMD_RESET_ARGS=y.
Therefore, only show the edl option if that symbol is enabled.
It is in a separate if block because any option but -w will only be
handled when CONFIG_SYSRESET_CMD_RESET_ARGS=y as seen with the
implementation in do_reset() in drivers/sysreset/sysreset-uclass.c.
Fixes: ef06c5d76f ("cmd: boot: Add '-edl' option to reset command documentation")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Return EFI_NOT_FOUND for EFI_ALLOCATE_ADDRESS overlap
When efi_allocate_pages() is called with EFI_ALLOCATE_ADDRESS, UEFI
expects EFI_NOT_FOUND if the requested address range is already
allocated or unavailable. U-Boot currently returns
EFI_OUT_OF_RESOURCES when efi_update_memory_map() detects an overlap
after a successful lmb_alloc_mem(), which does not match
EFI_ALLOCATE_ADDRESS semantics.
Return EFI_NOT_FOUND for EFI_ALLOCATE_ADDRESS requests that fail due
to an overlapping EFI memory descriptor, while keeping
EFI_OUT_OF_RESOURCES for other allocation types.
The UEFI specification [1] specifies that
EFI_BOOT_SERVICES.AllocatePages must return EFI_NOT_FOUND when the
requested address range is unavailable or already allocated;
EFI_OUT_OF_RESOURCES applies to non‑address‑specific allocation
failures.
[1] https://uefi.org/specs/UEFI/2.10_A/07_Services_Boot_Services.html
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
The UEFI specification does not clearly specify the behavior.
But let's follow the EDK II precedent here.
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Booting image generated with
make an7581_evb_defconfig
will results in
U-Boot 2026.04-00924-gfb815bd8793b (Apr 27 2026 - 15:08:30 +0300)
CPU: Airoha AN7581
DRAM: 512 MiB
Core: 35 devices, 19 uclasses, devicetree: separate
MMC: mmc@1fa0e000: 0
Loading Environment from MMC... *** Warning - No block device, using default environment
Loading Environment from MTD... *** Warning - get_mtd_device_nm() failed, using default environment
BUG at drivers/mtd/mtdcore.c:898/__put_mtd_device()!
BUG!
resetting ...
This happens because no any mtd partition defined in dts/mtdparts.
Disabling of ENV_IS_IN_MTD fixes an issue.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
This enables U-Boot loading from any 4K aligned address.
It makes U-Boot debugging a bit simpler.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
The smbios_get_val_si() function may get called for a sysinfo
property for which there is no mapping to a devicetree property.
Avoid a NULL pointer dereference in this case by skipping the
read of the mapped property from the device tree.
Fixes: 83b28b55d7 ("smbios: add support for dynamic generation of Type 9 system slot tables")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Raymond Mao <raymondmaoca@gmail.com>
Set the ops structure as static const. The structure is not accessible
from outside of this driver and is not going to be modified at runtime.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Use select_i2c_ch_pca9547() only when CONFIG_FSL_USE_PCA9547_MUX
is set, but several call in board/nxp/lx2160a/lx2160a.c invoke
it unconditionally,
or using unrelated Kconfigs (CONFIG_EMC2305, CONFIG_VID).
Compilation with LX2160A target that omits the mux therefore fails with
error: implicit declaration of function 'select_i2c_ch_pca9547'
Add a static inline stub with -EOPNOTSUPP for the
!CONFIG_FSL_USE_PCA9547_MUX case so all cases compile cleanly.
Adapted from the convention used by include/scmi_nxp_protocols.h for
SCMI subprotocol stubs.
There is no functional change for NXP boards: all eight upstream
LX2160A defconfigs (lx2160ardb / lx2160aqds / lx2162aqds and their
secure / stmm / verified_boot variants) already set
CONFIG_FSL_USE_PCA9547_MUX=y, so the real declaration wins.
The purpose is to support new boards that do not use the PCA9547.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The shared LX2160A board file calls helpers that only exist when
their subsystem is enabled. Gate them on the matching CONFIG_*:
- pci_init() under CONFIG_PCI.
- fdt_fixup_mc_ddr() and fsl_rgmii_init() under CONFIG_FSL_MC_ENET.
- qixis_*() and the QIXIS branch of checkboard() under
CONFIG_FSL_QIXIS; cpu_name(buf) moves out so the non-QIXIS path
still prints "Board: <name>".
- EVENT_SPY_SIMPLE on init_func_vid moves inside the
CONFIG_VOL_MONITOR_LTC3882_READ guard (was outside, dangling
symbol when LTC3882 off).
#if / #ifdef, not IS_ENABLED(), because the helpers are themselves
conditionally compiled.
While here, lx2160a_common.h: fix BOOT_TARGET_DEVICES_MMC
1 arg vs 2 args and gate the MMC target on CONFIG_CMD_MMC,
not CONFIG_MMC.
No functional change for NXP boards: LX2160ARDB, LX2160AQDS, or
LX2162AQDS, but mainly build clean up in order to support
other NXP lx2160a boards without those HW dependencies.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
base and size arrays can both contain up to total_memory_banks
elements.
This commit fixes the for loop condition to ensure that it does
not attempt to read past the end of both arrays.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
base and size arrays can both contain up to total_memory_banks
elements.
This commit fixes the for loop condition to ensure that it does
not attempt to read past the end of both arrays.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The RDB doesn't support NAND boot at all, remove the config for it.
Apparently, it was introduced by commit dd84058d24 ("kconfig: add
board Kconfig and defconfig files") which ran some scripts. Maybe that
script was wrong or the source boards.cfg was wrong. In any case, there
is no NAND flash on the RDB.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Nowadays, u-boot can build the pbl image itself. Refer to that image in
the documentation. Also fix some typos.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The RCW was just supporting SPI boot. Add a second one for the SDcard
boot. While at it, use the same naming scheme as for the other NXP
boards.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Switch to the upstream device tree, which already includes the UART
nodes we need for the DM.
We also need to increase malloc area before relocation otherwise you'll
get the following error and the board panics:
DRAM: Initializing....using SPD
alloc space exhausted ptr 414 limit 400
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Remove any empty function which is just called by the board code. There
is no need to define this function at all.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
board_eth_init() is dead code since commit e524f3a449 ("net: Remove
eth_legacy.c"). Remove it.
I'm not sure, all the shenanigans are covered by the new DM-version. The
MDIO mux and iomux controls probably are. The fman configuration
probably isn't. OTOH, nobody cared for years and the called
fm_info_set_phy_address() was also removed years ago.
This also removes fdt_fixup_board_enet() for the ls1043a and ls1046a
because it relies on the local variable "mdio_mux" being initialized by
the board_eth_init().
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
