CONFIG_XILINX_OF_BOARD_DTB_ADDR holds DTB address which U-Boot is checking.
Currently address in binman match default value but macro can be used
directly.
Also sync node name (s/hash-1/hash/) and sync location to have the same
order load/hash/image.
All binman DTSes are compiled that's why also guard
CONFIG_XILINX_OF_BOARD_DTB_ADDR which depends on OF_BOARD || OF_SEPARATE
which is a problem for mini configurations which are using OF_EMBED.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/a22c9671b965b222bfd419f5bfaee012929f3d88.1738659214.git.michal.simek@amd.com
The mini u-boot is hanging because of an initial stack
pointer address is used at half of the memory, when mini
u-boot is called reloc_fdt() function and doing memcpy()
for the fdt before relocation, and there is no sufficient
memory for the stack pointer. To fix, set an initial stack
pointer address to near the top of memory. The new stack
pointer address is assigned before calling the relocate
of u-boot based on the stack relocate calculation and
this new stack pointer is used while executing u-boot
from the relocated memory.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250203090409.844403-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Fixes annoying warnings of the following type when built with W=1 (for
each file including fpga.h):
CC drivers/fpga/fpga.o
In file included from /mnt/data/adahl/src/u-boot/include/xilinx.h:7,
from /mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:10:
/mnt/data/adahl/src/u-boot/include/fpga.h:61:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
61 | const fpga_desc *const fpga_get_desc(int devnum);
| ^~~~~
/mnt/data/adahl/src/u-boot/include/fpga.h:81:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
81 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:36:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
36 | const fpga_desc *const fpga_get_desc(int devnum)
| ^~~~~
/mnt/data/adahl/src/u-boot/drivers/fpga/fpga.c:53:1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
53 | const fpga_desc *const fpga_validate(int devnum, const void *buf,
| ^~~~~
Do some type and cast cleanup on that fpga_desc type while at it.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wignored-qualifiers
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20250121162213.1477506-1-ada@thorsis.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add ethernet aliases to CC (Carrier card) description to create a
connection which is used by fdt_fixup_ethernet() for updating
local-mac-address in DT.
On Kria SOM MAC address is read from i2c eeprom at start and based on it
environment variables are created. Without creating aliases U-Boot is not
able to inject local-mac-address DT property and OS won't get the same MAC
address unless another i2c read is happening in OS.
Also aliases are using string not phandle that's why full path has to be
provided but that shouldn't be a big issue because location of ethernet
controller is fixed.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6d360e71a0530d201578e27a6997dbd472772e39.1737466907.git.michal.simek@amd.com
Output images are generated via Binman only if SPL is enabled, as
there is no consumer for them otherwise. An #ifdef check ensures that
when SPL is enabled, Binman generates the U-Boot ITB. If SPL is disabled,
ITB generation is skipped since the ITB format is supported only by SPL.
Without SPL, generating such an image is unnecessary, as it would not be
used
The second reason is that when a DTB is passed, the current logic cannot
handle it without an additional step in U-Boot to parse an appended FIT
image and enable board-specific code to select the correct DTB config.
The MULTI_DTB_FIT configuration should be used if support for multiple
DTBs is required, but SPL is not being used.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/7cba738ae36dacf7d1b0cfbaf13e0c9b3a0df225.1737462296.git.michal.simek@amd.com
Whereas with Azure the JUnit results file is available for download,
Gitlab doesn't default to including it as an artifact to download and
only makes it available via its own JUnit parser. Fix this by listing it
as an artifact to save as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Now that we can run sandbox on arm64 hosts, have these jobs run on both
the fast arm64 and amd64 hosts to catch any issues.
Signed-off-by: Tom Rini <trini@konsulko.com>
Refer to the commit a3c101a613 ("examples: fix building on arm64")
fix for arm32. crt0.S does not even build with:
operating system and architecture:
5.15.0-130-generic x86_64
installed version of gcc and binutils:
gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.3)
GNU ld (GNU Binutils for Ubuntu) 2.34
used defconfig:
stm32h750-art-pi_defconfig
used commands for building:
export CROSS_COMPILE=arm-none-eabi- ARCH=arm
make stm32h750-art-pi_defconfig
make menuconfig # to add
make
examples/api/crt0.S: Assembler messages:
examples/api/crt0.S:32: Error: lo register required -- `ldr ip,=search_hint'
examples/api/crt0.S:33: Error: lo register required -- `str sp,[ip]'
examples/api/crt0.S:39: Error: lo register required -- `ldr ip,=syscall_ptr'
examples/api/crt0.S:40: Error: lo register required -- `ldr pc,[ip]'
make[2]: *** [scripts/Makefile.build:292：examples/api/crt0.o] Error 1
Use valid register names and instructions.
Signed-off-by: Liya Huang <1425075683@qq.com>
CONFIG_STANDALONE_LOAD_ADDR has been used for examples/standalone
but not for examples/api.
The suitability of an address to load an ELF binary and run it does
not only depend on the architecture but also on the memory layout of
the board which is not reflected in the default value of
CONFIG_STANDALONE_LOAD_ADDR.
Commit 32b7e39db4 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig")
set the default on RISC-V to 0x0 though most boards used 0x80200000
before the patch.
On most boards we can assume 8 MiB of memory available above $loadaddr.
So we can safely use $loadaddr + 4 MiB as load address for the standalone
example and eliminate CONFIG_STANDALONE_LOAD_ADDR altogether.
Fixes: 32b7e39db4 ("Convert CONFIG_STANDALONE_LOAD_ADDR to Kconfig")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The current load address for the 'demo' binary does not work for
qemu_arm_defconfig.
The suitability of an address to load an ELF binary and run it does
not only depend on the architecture but also on the memory layout of
the board.
On most boards we can assume that 8 MiB of memory is available above
$loadaddr. So $loadaddr + 0x400000 should work there.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
A FIT image which is NOT using -E when created by mkimage - that is with
image data within the FIT - will fail to apply FDTO if the base FDT
image node does not specify a load property (which points to an address
in DRAM). This is because we check that the FDT address we want to apply
overlay to (i.e. modify and likely increase in size) is not inside the
FIT and give up otherwise. This is assumed necessary because we may then
overwrite other data when applying in-place.
However, we can do better than giving up: relocating the FDT in another
place in DRAM where it's safe to increase its size and apply FDTOs.
While at it, do not discriminate anymore on whether the data is within
the FIT data address space - that is FIT images created with mkimage -E
- as that still may be susceptible to unintended data overwrites as
mkimage -E simply concatenates all blobs after the FIT. If the FDT blob
isn't the last, it'll result in overwriting later blobs when resizing.
The side effect is that the load property in the FIT is only
temporarily used to load the FDT but then relocated right before we
start applying overlays.
Suggested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Christian Marangi <ansuelsmth@gmail.com> says:
This is the last batch of part to push actual support of
OF_UPSTREAM for the mediatek SoC.
The plan is to make the current downstream DTS on part with
upstream implementation so we can permit a gradual transition to
it while we don't cause any regression to any user.
This is to have the same node downstream and upstream.
Mediatek is working hard upstream to also push all the remaining
nodes.
All patch are the final changes after the pinctrl patch
merged previously.
All patch pass CI tests
Link: https://github.com/u-boot/u-boot/pull/731
Link: https://lore.kernel.org/r/20250127134046.26345-1-ansuelsmth@gmail.com
Add USB PHY nodes for MT7981. These are needed for USB support and also
for PCIe support as the u3 PHY can also be used for PHY.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Move gpio-controller up to pinctrl node and rename label to "pio" to
match the label used in upstream kernel linux.
Update any DTS that reference the pinctrl to follow the new naming and
structure.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Move gpio-controller up to pinctrl node and rename label to "pio" to
match the label used in upstream kernel linux.
Update any DTS that reference the pinctrl to follow the new naming and
structure.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Move gpio-controller up to pinctrl node and rename label to "pio" to
match the label used in upstream kernel linux.
Update any DTS that reference the pinctrl to follow the new naming and
structure.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Rename reg-names to upstream linux format. Upstream linux drop the
"_base". To make use of upstream DTSI, align to the upstream naming.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Tested-by: Weijie Gao <weijie.gao@mediatek.com>
Simon Glass <sjg@chromium.org> says:
This includes the VBE ABrec (A/B/recovery) implementation as well as a
number of patches needed to make it work:
- marking some code as used by SPL_RELOC
- selection of images from a FIT based on the boot phase
- removal of unwanted hash code which increases code-size too much
- a few Kconfig-related additions for VPL
Note: The goal for the next series (part H) is to enable VBE on
rk3399-generic, i.e. able to boot on multiple rk3399-based boards with
only the TPL phase being different for each board.
Link: https://lore.kernel.org/r/20250126184333.4058848-1-sjg@chromium.org/
So far only VBE-simple is implemented in U-Boot. This supports a single
image which can be updated in situ.
It is often necessary to support two images (A and B) so that the board
is not bricked if the update is interrupted or is bad.
In some cases, a non-updatable recovery image is desirable, so that the
board can be returned to a known-good state in the event of a serious
failure.
Introduce ABrec which provides these features. It supports three
independent images and the logic to select the desired one on boot.
While we are here, fix a debug message to indicate the function it
called. Provide a maintainers entry for VBE.
Note that fwupdated only supports VBE-simple so far, but supports for
ABrec will appear in time.
Signed-off-by: Simon Glass <sjg@chromium.org>
When VBE operates within VPL it does not want the FDT to be changed.
Provide a way to disable this feature.
Move the FIT_IMAGE_TINY condition out of spl_fit_record_loadable() so
that both conditions are together. This makes the code easier to
understand.
Replace the existing fit_loaded member, which is no-longer used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Join the comment block for the fit_image_load() call back to where it
should be. Also fix a debug statement.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for moving from TPL->VPL->SPL so that the VPL build can fit
properly into the boot flow.
Use #ifdefs to avoid creating unwanted symbols which Binman would then
try (and perhaps fail) to provide.
Add debugging to indicate the next phase.
Signed-off-by: Simon Glass <sjg@chromium.org>
Mark these functions as needed by relocation. These functions are used
to copy data while relocating the next-phase image.
Drop the 'safe' versions from SPL as they are not needed. Change the
static array to a local one, to avoid link errors when trying to access
the data.
Signed-off-by: Simon Glass <sjg@chromium.org>
Mark the lz4 decompression code as needed by relocation. This is used to
decompress the next-phase image.
Drop the 'safe' versions from SPL as they are not needed. Change the
static array to a local one, to avoid a crash errors when trying to
access the data from relocated code. Make this conditional to avoid a
code-size increase when SPL_RELOC is not used/
Signed-off-by: Simon Glass <sjg@chromium.org>
Mark the crc8 code as needed by relocation. This is used as a simple
check against corruption of the code when copying.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a linker symbol which can be used to mark relocation code, so it can
be collected by the linker and copied into a suitable place and executed
when needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some phases may wish to use full FIT-loading and others not, so allow
this to be controlled.
Add some debugging while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
