Move stm32mp15_dhcom_basic_defconfig into stm32mp15_dhcom_basic.config.
Retain legacy stm32mp15_dhcom_basic_defconfig as multi-config for all
DH STM32MP15xx DHCOM based boards. Move stm32mp15_dhsor_basic_defconfig
into stm32mp15_dhsor_basic.config. Retain stm32mp15_dhsor_basic_defconfig
as multi-config for all DH STM32MP15xx DHCOR based boards.
Introduce separate stm32mp15_dhcom_drc02_basic_defconfig,
stm32mp15_dhcom_pdk2_basic_defconfig, stm32mp15_dhcom_picoitx_basic_defconfig
for each STM32MP15xx DHCOM based board and separate
stm32mp15_dhcor_avenger96_basic_defconfig,
stm32mp15_dhcor_drc_compact_basic_defconfig,
stm32mp15_dhcor_testbench_basic_defconfig for each
STM32MP15xx DHCOR based board, to make build for those boards easier.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
The environment is missing closing quotes for string variable, but the
variable is empty on this system, remove the CONFIG_BOOTCOUNT_ALTBOOTCMD
assignment entirely.
Fixes: 940135eea5 ("Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
The removal of the "st,button1" and "st,led1" compatibles has emptied
the board_late_init(), so let's remove it along with the configuration
that allows its invocation.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
It is pointless to use the custom compatible "st,led1" when
stm32746g-eval.dts and stm32f769-disco.dts already contain the
"gpio-leds" compatible, which is specifically used for GPIO LEDs
management.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
It is pointless to use the custom compatible "st,button1" when
stm32746g-eval.dts and stm32f769-disco.dts already contain the
"gpio-keys" compatible, which is specifically used for button
management.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
LDO2 is expansion connector supply on STM32MP13xx DHCOR DHSBC rev.200.
LDO5 is carrier board supply on STM32MP13xx DHCOR DHSBC rev.200. Keep
both regulators always enabled to make sure both the carrier board and
the expansion connector is always powered on and supplied with correct
voltage.
Describe ST33TPHF2XSPI TPM 2.0 chip reset lines.
This is a port of Linux kernel patch posted at:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20250302152605.54792-1-marex@denx.de/
This change shall be removed when the Linux kernel DT change lands
and Linux kernel DTs get synchronized with U-Boot DTs.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
On STM32MP15xx with 1 GiB of DRAM, the gd->ram_top becomes 0,
because DRAM base 0xc0000000 + DRAM size 0x40000000 leads to
gd->ram_top overflow which resets it to 0. Handle this special
case simply by checking for gd->ram_top being zero, and if it
is, assume there is no addr >= gd->ram_top .
This fixes boot hang on STM32MP15xx with 1 GiB of DRAM.
Fixes: 25fb58e88a ("ARM: stm32mp: Fix dram_bank_mmu_setup() for LMB located above ram_top")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
CONFIG_SYS_FDT_PAD defines the number of unused bytes added to a
device-tree and not the total size.
Fixes: 40ed7be4af ("Convert CONFIG_SYS_FDT_PAD to Kconfig")
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Structure jmp_buf_data provides the underlying format of jmp_buf, which
we actually don't care about. Clean up existing code to use the standard
jmp_buf type. This introduces no functional change.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Separate setjmp.h into an architecture independent part and an architecture
specific part. This simplifies moving from using struct jmp_buf_data
directly to using type jmp_buf in our code which is the C compliant way.
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add support for multiple efi_net_obj structs in efi_net.c. This comes
in preparation for an EFI network driver supporting multiple network
interfaces. For now the EFI network stack still registers a single ethernet
udevice as an EFI network device even if multiple are present, namely
the one that was the current device at the moment of EFI initialization.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
In preparation to support multiple EFI net objects, support
constructing device paths using an ethernet device different
than the default. Add a udevice argument to the device path
generation, and keep the callsites with eth_get_dev() to
preserve existing functionality.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This gets called each time a payload is to get executed by bootefi.
For now this only updates the PXE IP address.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
The coomand bootefi calls efi_init_obj_list to do the efi set up
before launching an .efi payload, but efi_init_obj_list is called
only once. There are some initializations which depend on the
environment and should be done each time a payload gets launched and
not only once. A motivation for this changes is the following order
of events:
1. Launch an EFI application (e.g. bootefi hello)
2. Change the ip address
3. Launch another application which uses the pxe protocol
As the EFI pxe protocol was initialized when the handles
for efi net were created in 1., the ip was hardcoded there.
In this example, another possibility would be to make a callback for ip
address changes to go all the way up to efi_net.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
The following symbols are exposed:
- efi_reinstall_protocol_interface
This is done so that the device path protocol interface
of the network device can be changed internally by u-boot
when a new bootfile gets downloaded.
- eth_set_dev
To support multiple network udevices
- efi_close_event
This comes in preparation to support unregistering
an EFI network device from the EFI network stack when
the underlying U-boot device gets removed
- efi_[dis]connect_controller
The EFI network driver uses ConnectController to add a
NIC to the EFI network stack.
- efi_uninstall_protocol_interface
connect_controler for the efi network driver can install
protocols, which need to be uninstalled in disconnect_controller
- EFI_SIMPLE_NETWORK_PROTOCOL_GUID
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Check wget_info->buffer_size for overflow and do not clean the wget_info struct
on failure, let the owner of the struct handle the error. The latter is necesary
, e.g., for when a request fails because the provided buffer was too small.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
Add a simple and transparent LVDS de/encoder driver with a powerdown
gpio and a power supply.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Hide video bridge functions behind config condition and add inline
fallbacks to avoid erroring out when using header without config
enabled.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add get_display_timing ops for internal bridges linked to
panels that do not support EDID (MIPI-DSI panels for example)
or have EDID not routed.
Tested-by: Dang Huynh <danct12@riseup.net> (PineTab 2)
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The existing memory layout places the bloblist at 0xb000 and the fdt at
0x100, resulting in a 0xaf00 size constraint for the fdt. This constraint
has been reached. Lets modify the layout by moving the bloblist to 0x100,
device tree to 0x1000 and placing early memory allocation after pre-console
buffer at 0xf4000. This should guarantee sufficient memory allocation for
future expansion.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Gabriel Dalimonte <gabriel.dalimonte@gmail.com> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/20250217182648.31294-1-gabriel.dalimonte@gmail.com
Following the UEFI specification. The specification did not seem to
delineate if file_name was explicitly a file name only, or could
include paths to move the file to a different directory. The more
generous interpretation of supporting paths was selected.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
In order to support renaming via SetInfo(), path must allow for longer
values than what was originally present when file_handle was allocated.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
POSIX filesystem functions that create or remove directory entries contain
text along the lines of "[function] shall mark for update the last data
modification and last file status change timestamps of the parent
directory of each file." [1][2][3] The common theme is these timestamp
updates occur when a directory entry is added or removed. The
create_link() and delete_dentry_link() functions have been changed to
update the modification timestamp on the directory where the direntry
change occurs. This differs slightly from Linux in the case of rename(),
where Linux will not update `new_path`'s parent directory's timestamp if
it is replacing an existing file. (via `vfat_add_entry` [4])
The timestamps are not updated if the build configuration does not support
RTCs. This is an effort to minimize introducing erratic timestamps where
they would go from [current date] -> 2000-01-01 (error timestamp in the
FAT driver). I would assume an unchanged timestamp would be more valuable
than a default timestamp in these cases.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
[2] https://pubs.opengroup.org/onlinepubs/9799919799/functions/unlink.html
[3] https://pubs.opengroup.org/onlinepubs/9799919799/functions/open.html
[4] https://elixir.bootlin.com/linux/v6.12.6/source/fs/fat/namei_vfat.c#L682
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
The create_link() code was previously duplicated in two existing functions.
The two functions will be used in a future commit to achieve renaming.
Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com>
A problem we have today is that some instances of IS_ENABLED(FOO) have
crept in to the code. This is in turn because with checkpatch.pl this is
only a warning and not an error, so they were overlooked. And looking
deeper, in the Linux kernel this pattern is allowed because
IS_ENABLED(DEFINED_FLAG) is allowed if discouraged and a quick skim of
the instances I saw in the current kernel follow this pattern. In U-Boot
however, this is not allowed, so bump to an error.
Signed-off-by: Tom Rini <trini@konsulko.com>
In case MAX_SYMLINK_NEST is reached while determining the size
on a symlink node, the function returns immediately.
This would not free the resources after the free_strings: label
causing a memory leak.
Set the ret value and just break out of the switch to fix this.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
The GPL-2.1+ SPDX License Identifier doesn't exist, but luckily the full
license text was available which shows that GPL-2.1+ was a typo and it
should have been LGPL-2.1-or-later.
As the '+' in LGPL-2.1+ is deprecated in SPDX 3.0, use the preferred
identifier, which is '-or-later'.
Normally the full license header is removed when switching to SPDX
License Identifiers, so do that now.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
AMD/Xilinx changes for v2025.04-rc4
Zynq:
- Guard code around SPL_FS_LOAD_PAYLOAD_NAME
Versal*:
- Remove tftp block size 4096
Versal:
- Use clocks per DT binding
- Store driver data in data section
Versal Gen 2:
- Fix major/minor version decoding
Add a helper to avoid needing to use a list within a list for this
simple case.
Update existing users of runpipe() to use this where possible.
Signed-off-by: Simon Glass <sjg@chromium.org>
This file has a lot of warnings. Before adding any more features, fix
those which are straightforward to resolve.
Signed-off-by: Simon Glass <sjg@chromium.org>
Throwing an Exception is not very friendly since it is the top-level
class of all exceptions. Declare a new class instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
