Currently, Kconfig allows building CONFIG_DM_74X164 without
CONFIG_DM_SPI, which results in linker errors because this driver
actually uses dm_spi_* functions:
drivers/gpio/74x164_gpio.o: in function `gen_74x164_write_conf':
undefined reference to `dm_spi_claim_bus'
undefined reference to `dm_spi_xfer'
undefined reference to `dm_spi_release_bus'
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
With a recent Binman change, the skip-at-start property is now honoured,
meaning that all image-pos values in the affected section start from
the skip-at-start value.
The x86 code works around the old behaviour at present, so update it.
Signed-off-by: Simon Glass <sjg@chromium.org>
A discussion on the mailing list about dealing with block offsets and
binman symbols made me think that something is wrong with how Binman
deals with the skip-at-start property.
The feature was originally designed to handle x86 ROMs, which are mapped
at the top of the address space. That seemed too specific, whereas
skipping some space at the start seemed more generally useful.
It has proved useful. For example, rockchip images start at block 64,
so a skip-at-start of 0x8000 deals with this.
But it doesn't actually work correctly, since the image_pos value does
not give the actual position on the media.
Fix this and update the documentation, moving it into the 'section'
section.
Signed-off-by: Simon Glass <sjg@chromium.org>
Snow requires a fixed bloblist to operate, so re-enable this option.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 864106f3c4 ("bloblist: Make BLOBLIST_ALLOC the default")
Unfortunately this change was not safe as some devices are bound before
relocation, but we don't want to probe them.
It causes 'raise: Signal # 8 caught' on jerry.
Move the bootstage timer to after autoprobe in initf_dm() since the
trace test does not tolerate any variance.
This reverts commit 21dd873572.
Signed-off-by: Simon Glass <sjg@chromium.org>
The commit bc07851897 ("board: ti: Pull redundant DDR functions to a
common location and Fixup DDR size when ECC is enabled") broke DRAM
support for the Verdin AM62. This was partially fixed with commit
3f866c47b5 ("board: verdin-am62: add dram_init_banksize"). However,
because fixup_memory_node was not called, the Linux kernel was started
with the wrong memory size on modules with less memory available. This
resulted in boot failures. Fix this issue by calling fixup_memory_node
in the board file.
spl_perform_fixups will be called in the SPL and now sets the correct
memory size in the device tree of U-Boot by calling fixup_memory_node.
U-Boot will then adjust the memory sizes of Linux during bootm/booti in
fdt_fixup_memory_banks. This chain ensures that U-Boot and Linux only
use RAM that is actually available.
Fixes: 3f866c47b5 ("board: verdin-am62: add dram_init_banksize")
Fixes: bc07851897 ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
When enabling net console and console multiplexing, a boot crash was
observed using mtk_eth driver with stdin/stdout set to "serial,nc"
in persistent environment:
> CPU: MediaTek MT7981
> Model: OpenWrt One
> DRAM: 1 GiB
> Core: 35 devices, 15 uclasses, devicetree: separate
> spi-nand: spi_nand spi_nand@0: Winbond SPI NAND was found.
> spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
> Loading Environment from UBI... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> mtd: partition "ubi" extends beyond the end of device "spi-nand0" -- size truncated to 0x7f00000
> Read 126976 bytes from volume ubootenv to 000000007f7bf0c0
> Read 126976 bytes from volume ubootenv2 to 000000007f7de100
> OK
> "Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeea000018
> elr: 0000000041e63cd4 lr : 0000000041e1b844 (reloc)
> elr: 000000007ff9ecd4 lr : 000000007ff56844
> x0 : eafffffeea000018 x1 : 000000007fb552e0
> x2 : 00000000000000fe x3 : 0000000000000000
The cause is that "serial,nc" forced the console subsystem to
initialize the ethernet driver before ethernet subsystem
initialization (console_init_r() is called before initr_net()).
During the mtk_eth driver initialization, mdio_register() will be
called, and miiphy_get_dev_by_name() will then be called.
The miiphy_get_dev_by_name() will check the list "mii_devs" to see
if the passed device name exists. However the mii_devs is defined
without initialization:
> static struct list_head mii_devs;
and the actual initialization is done in the following chain:
initr_net -> eth_initialize -> eth_common_init -> miiphy_init
Since initr_net() hasn't be called, iterating over the mii_devs
will access to physical address 0 (mii_devs.next == NULL) and will
cause the crash.
The fix is to define mii_devs using:
> static LIST_HEAD(mii_devs);
As the "current_mii" is defined as a static variable, it will
always be NULL in board_r stage and initializing it will NULL is
unnecessary. So the entire miiphy_init() can be remove.
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
- Ensure `free_ctx` is called in both error and success paths.
- Fix memory leak in `ctx.signature` when `do_add` fails."
Triggers found by static analyzer Svace.
Signed-off-by: Anton Moryakov <ant.v.moryakov@gmail.com>
The current code has a problematic corner case with formar "%c" and
0 as parameter. The proper zero byte is being emitted into digit buffer
but the final copy into outstr expects null-terminated string and doesn't
copy the required \0 byte. This has lead to malformed TFTP packets, refer
to tftp_send() which relies on %c to generate multiple zero-terminated
strings in one buffer.
Introduce a variable to force the copy of one character in this case.
The new behaviour is consistent with non-tiny implementation.
Reported-by: Chintan Vankar <c-vankar@ti.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Siddharth Vadapalli <s-vadapalli@ti.com> says:
This series enables configs for USB DFU boot, USB DFU flash and USB Mass
Storage command for J784S4. The device-tree changes required for enabling
these features will be posted as patches to Linux device-tree mailing lists
and will eventually make it to U-Boot via DT Sync.
Link: https://lore.kernel.org/r/20250218094950.2542006-1-s-vadapalli@ti.com
Enable support for USB DFU boot via USB0 instance of USB on J784S4 SoC
which is a Cadence USB Controller. Additionally, enable support for USB
DFU flash and USB Mass Storage (UMS) command. While at it, sync with
savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The USB0 instance of USB on J784S4 SoC is a Cadence USB Controller and
supports USB DFU boot. Enable support for it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Enable ESM configs. ESMs are a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Initialize MCU & MAIN Domain ESMs as a prerequisite to enable
watchdog reset functionality. The ESM aka error signalling module
is primarily responsible for sensing the watchdog reset event.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
My previous address is no longer accessible, but I will continue to be
involved in maintaining the ADI sc5xx platforms. This updates my contact
information and hopefully avoids bouncing emails from other developers.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Line 171 in README is describing that before relocation
no code should use global variable because global variables
are placed to BSS section which is initialized to 0 after
relocation.
On Versal platforms clock driver is initialized before
relocation (via using dm,bootph-all flag in DT) and global
variables are initialized which works if this is used only
before relocation. But the variables are used after
relocation too but values are zeroed which is ending up
incorrect behavior.
That's why place variables to data section to ensure that
values are not cleared which is for now the quickest
temporary solution. The correct way to do it is to move
all global variables to private data to avoid it.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20250218052419.1141139-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Fix build error "undefined reference to `is_warm_boot'" when
ls1021atsn and ls1021atwr boards are built with CONFIG_SPL=y and
CONFIG_DEEP_SLEEP=n.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
When an error is detected in the TSEC receive path, the driver currently
prints an error message, but leaves the corresponding packet descriptor
in its old state (i.e. owned by the CPU side). As a result, the packet
queue can be starved of available buffers if enough errors happen.
To recover from errors, re-arm the packet buffer descriptor after an
error has been detected.
Errors can be provoked by changing a PHY with phy-mode = "rgmii-id" to
phy-mode = "rgmii".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This is necessary for the following patch. No functional change.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Baocheng Su <baocheng.su@siemens.com> says:
This introduces a sysinfo driver which also permits SMBIOS support.
The first 10 patches of v2 have already been applied. The remaining is
solely the sysinfo driver. To maintain consistency and ease of searching
through the history, the series title remains unchanged.
Link: https://lore.kernel.org/r/20250218023614.52574-1-baocheng.su@siemens.com
Drop the info structure parsing of the board in favor of our new sysinfo
driver to avoid code duplication.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: rebasing, split-up, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This brings a sysinfo driver and DT entry for the IOT2050 board series.
It translates the board information passed from SE-Boot to SPL into
values that can be retrieved via the sysinfo API. Will is already used
to fill the SMBIOS table when booting via EFI.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
[Jan: split-off as separate patch, cleanup]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add a new field SYSID_BOARD_RAM_SIZE_MB to sysinfo structure to store
the size of RAM in MB. dram_init can use this field to get the RAM size
via sysinfo driver.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
This commit introduces a new API to the sysinfo module, allowing access
to data elements. This is particularly useful for handling data with
multiple instances, such as MAC addresses.
Signed-off-by: Baocheng Su <baocheng.su@siemens.com>
During dma memcpy, bcdma descriptor gets allocated for each
transaction and not freed after completion of that transaction.
So, avoid the memory allocation for every transaction.
Add one descriptor per dma device and allocate it once in
resource setup. This descriptor can now be used for all
dma memcpy transactions optimally.
Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com>
serial_out_dynamic() takes a u8* addr and uses it for 8-bit or 32-bit
accesses, depending on the value of plat->reg_width. This results in a
pointer type mismatch that the compiler may even turn into an error:
drivers/serial/ns16550.c: In function ‘serial_out_dynamic’:
drivers/serial/ns16550.c:115:42: error: passing argument 1 of ‘out_be32’ from incompatible pointer type [-Wincompatible-pointer-types]
115 | out_be32(addr, value);
| ^~~~
| |
| u8 * {aka unsigned char *}
This error was observed on PowerPC.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
If there is an unallocated memory area before the last, filling parting
the size calculation for MTD_SIZE_REMAINING does not take this hole
into account.
Fix this by calculating the remaining size just based on total size
and partition offset.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Rename the variants of env_mmc_load() for redundant and non-redundant
environment to env_mmc_load_redundant() and env_mmc_load_singular()
respectively and convert the env_mmc_load() implementation to use of
if (IS_ENABLED(...)). As a result, drop __maybe_unused from
mmc_env_is_redundant_in_both_boot_hwparts().
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Introduce a new function mmc_env_is_redundant_in_both_boot_hwparts()
which replaces IS_ENABLED(ENV_MMC_HWPART_REDUND) and internally does
almost the same check as the macro which assigned ENV_MMC_HWPART_REDUND
did, and call it in place of IS_ENABLED(ENV_MMC_HWPART_REDUND).
The difference compared to IS_ENABLED(ENV_MMC_HWPART_REDUND) is
in the last conditional, which does not do plain macro compare
(CONFIG_ENV_OFFSET == CONFIG_ENV_OFFSET_REDUND), but instead does
mmc_offset(mmc, 0) == mmc_offset(mmc, 1). If OF_CONTROL is not
in use, this gets optimized back to original macro compare, but
if OF_CONTROL is in use, this also takes into account the DT
properties u-boot,mmc-env-offset and u-boot,mmc-env-offset-redundant.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Check wget_info->buffer_size for overflow and do not clean the wget_info struct
on failure, let the owner of the struct handle the error. The latter is necesary
, e.g., for when a request fails because the provided buffer was too small.
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <adriano.cordova@canonical.com>
