* Patches by Robert Schwebel, 26 Jun 2003:

- logdl
  - csb226
  - innokom

* Patch by Pantelis Antoniou, 25 Jun 2003:
  update NetVia with V2 board support

CHANGELOG

@@ -2,6 +2,269 @@
 Changes since U-Boot 0.3.1:
 ======================================================================
 
+* Patches by Robert Schwebel, 26 Jun 2003:
+  - logdl
+  - csb226
+  - innokom
+
+* Patch by Pantelis Antoniou, 25 Jun 2003:
+  update NetVia with V2 board support
+
+* Header file cleanup for ARM
+
+* Patch by Murray Jensen, 24 Jun 2003:
+  - make sure to use only U-boot provided header files
+  - fix problems with ".rodata.str1.4" section as used by GCC-3.x
+
+* Patch by Stefan Roese, 24 Jun 2003:
+  - Update esd ASH405 board files.
+  - Update esd DASA_SIM config file.
+  - Add ping command to some esd boards.
+
+* Patch by Yuli Barcohen, 23 Jun 2003:
+  Update for MPC8260ADS board
+
+* Patch by Murray Jensen, 23 Jun 2003:
+  - cleanup of GCC 3.x compiler warnings
+
+* Patch by Rune Torgersen, 4 Jun 2003:
+  add large memory support for MPC8266ADS board
+
+* Patch by Richard Woodruff, 19 June 03:
+  - Enabled standard u-boot device abstraction for ARM
+  - Enabled console device for ARM
+  - Initilized bi_baudrate for ARM
+
+* Patch by Bill Hargen, 23 Apr 2003:
+  fix byte order for 824x I2C addresses (write op)
+
+* Patch by Murray Jensen, 20 Jun 2003:
+  - hymod update
+  - cleanup (especially for gcc-3.x compilers)
+
+* Patch by Tom Guilliams, 20 Jun 2003:
+  added CONFIG_750FX support for IBM 750FX processors
+
+* Patch by Devin Crumb, 02 Apr 2003:
+  Fix clock divider rounding problem in drivers/serial.c
+
+* Patch by Richard Woodruff, 19 June 03:
+  - Fixed smc91c111 driver to sync with the u-boot environment
+    (driver/smc91c111.c).
+  - Added eth_init error return check in NetLoop (net/net.c).
+
+* Patch by Ken Chou, 19 June 2003:
+  Added support for A3000 SBC board (Artis Microsystems Inc.)
+
+* Patches by Murray Jensen, 17 Jun 2003:
+  - Hymod board database mods: add "who" field and new xilinx chip types
+  - provide new "init_cmd_timeout()" function so code external to
+    "common/main.c" can use the "reset_cmd_timeout()" function before
+    entering the main loop
+  - add DTT support for adm1021 (new file dtt/adm1021.c; config
+    slightly different. see include/configs/hymod.h for an example
+    (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
+    CFG_DTT_ADM1021 defined)
+  - add new "eeprom_probe()" function which has similar args and
+    behaves in a similar way to "eeprom_read()" etc.
+  - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
+    function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
+  - gdbtools copyright update
+  - ensure that set_msr() executes the "sync" and "isync" instructions
+    after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
+  - 8260 I/O ports fix: Open Drain should be set last when configuring
+  - add SIU IRQ defines for 8260
+  - allow LDSCRIPT override and OBJCFLAGS initialization: change to
+    config.mk to allow board configurations to override the GNU
+    linker script, selected via the LDSCRIPT, make variable, and to
+    give an initial value to the OBJCFLAGS make variable
+  - 8260 i2c enhancement:
+    o correctly extends the timeout depending on the size of all
+      queued messages for both transmit and receive
+    o will not continue with receive if transmit times out
+    o ensures that the error callback is done for all queued tx
+      and rx messages
+    o correctly detects both tx and rx timeouts, only delivers one to
+      the callback, and does not overwrite an earlier error
+    o logic in i2c_probe now correct
+  - add "vprintf()" function so that "panic()" function can be
+    technically correct
+  - many Hymod board changes
+
+* Patches by Robert Schwebel, 14 Jun 2003:
+  - add support for Logotronic DL datalogger board
+  - cleanup serial line after kermit binary download
+  - add debugX macro (debug level support)
+  - update mach-types.h to latest arm.linux.org.uk master list.
+
+* Patches by David Müller, 12 Jun 2003:
+  - rewrite of the S3C24X0 register definitions stuff
+  - "driver" for the built-in S3C24X0 RTC
+
+* Patches by Yuli Barcohen, 12 Jun 2003:
+  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
+  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
+    configuration word supplied by FPGA on some MPC8260ADS boards
+
+* Patch by Pantelis Antoniou, 10 Jun 2003:
+  Unify status LED interface
+
+* Add support for DS12887 RTC; add RTC support for ATC board
+
+* Patch by Nicolas Lacressonniere, 11 Jun 2003:
+  Modifications for Atmel AT91RM9200DK ARM920T based development kit
+  - Add Atmel DataFlash support for reading and writing.
+  - Add possibility to boot a Linux from DataFlash with BOOTM command.
+  - Add Flash detection on Atmel AT91RM9200DK
+    (between Atmel AT49BV1614 and AT49BV1614A flashes)
+  - Replace old Ethernet PHY layer functions
+  - Change link address
+
+* Patch by Frank Smith, 9 Jun 2003:
+  use CRIT_EXCEPTION for machine check on 4xx
+
+* Patch by Detlev Zundel, 13 Jun 2003:
+  added implementation of the "carinfo" command in cmd_immap.c
+
+* Fix CONFIG_NET_MULTI support in include/net.h
+
+* Patches by Kyle Harris, 13 Mar 2003:
+  - Add FAT partition support
+  - Add command support for FAT
+  - Add command support for MMC
+  ----
+  - Add Intel PXA support for video
+  - Add Intel PXA support for MMC
+  ----
+  - Enable MMC and FAT for lubbock board
+  - Other misc changes for lubbock board
+
+* Patch by Robert Schwebel, April 02, 2003:
+  fix for SMSC91111 driver
+
+* Patch by Vladimir Gurevich, 04 Jun 2003:
+  make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
+
+* Patch by Stefan Roese, 05 Jun 2003:
+  - PPC4xx: Fix bug for initial stack in data cache as pointed out by
+    Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
+    data cache can be used even if the chip select is in use.
+  - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
+    (see README for further description).
+  - Changed config files of CONFIG_EEPRO100 boards to use the
+    CFG_RX_ETH_BUFFER define.
+
+* Add support for RMU board
+
+* Add support for TQM862L at 100/50 MHz
+
+* Patch by Pantelis Antoniou, 02 Jun 2003:
+  major reconstruction of networking code;
+  add "ping" support (outgoing only!)
+
+* Patch by Denis Peter, 04 June 2003:
+  add support for the MIP405T board
+
+* Patches by Udi Finkelstein, 2 June 2003:
+  - Added support for custom keyboards, initialized by defining a
+    board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
+  - Added support for the RBC823 board.
+  - cpu/mpc8xx/lcd.c now automatically calculates the
+    Horizontal Pixel Count field.
+
+* Fix alignment problem in BOOTP (dhcp_leasetime option)
+  [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
+
+* Patch by Mark Rakes, 14 May 2003:
+  add support for Intel e1000 gig cards.
+
+* Patch by Nye Liu, 3 Jun 2003:
+  fix critical typo in MAMR definition (include/mpc8xx.h)
+
+* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
+
+* Patch by Klaus Heydeck, 2 Jun 2003
+  Minor changes for KUP4K configuration
+
+* Patch by Marc Singer, 29 May 2003:
+  Fixed rarp boot method for IA32 and other little-endian CPUs.
+
+* Patch by Marc Singer, 28 May 2003:
+  Added port I/O commands.
+
+* Patch by Matthew McClintock, 28 May 2003
+  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
+  - minor patches for utx8245
+
+* Patch by Daniel Engström, 28 May 2003:
+  x86 update
+
+* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
+  add nand flash support to SXNI855T configuration
+  fix/extend nand flash support:
+  - fix 'nand erase' command so does not erase bad blocks
+  - fix 'nand write' command so does not write to bad blocks
+  - fix nand_probe() so handles no flash detected properly
+  - add doc/README.nand
+  - add .jffs2 and .oob options to nand read/write
+  - add 'nand bad' command to list bad blocks
+  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
+  - make NAND read/write faster
+
+* Patch by Rune Torgersen, 23 May 2003:
+  Update for MPC8266ADS board
+
+* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
+  instead CFG_MONITOR_LEN is now only used to determine  _at_compile_
+  _time_  (!) if the environment is embedded within the U-Boot image,
+  or in a separate flash sector.
+
+* Cleanup CFG_DER #defines in config files (wd maintained only)
+
+* Fix data abort exception handling for arm920t CPU
+
+* Fix alignment problems with flash driver for TRAB board
+
+* Patch by Donald White, 21 May 2003:
+  fix calculation of base address in pci_hose_config_device()
+
+* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
+  execute "cmd2", even if "cmd1" fails. Note that this is different
+  to "run var1 var2" where the contents of "var2" will NOT be
+  executed when a command in "var1" fails.
+
+* Add zero-copy ramdisk support (requires corresponding kernel support!)
+
+* Patch by Kyle Harris, 20 May 2003:
+  In preparation for an ixp port, rename cpu/xscale and arch-xscale
+  into cpu/pxa and arch-pxa.
+
+* Patch by Stefan Roese, 23 May 2003:
+  - IBM PPC405EP port added.
+  - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
+    UART0) is used as default U-Boot console. PPC4xx only!
+  - esd ASH405 board added (PPC405EP based).
+  - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
+  - esd CPCI405AB board added.
+  - esd PMC405 board added.
+  - Update of some esd boards.
+
+* Patch by Denis Peter, 19 Mai 2003:
+  add support for the MIP405-3 board
+
+* Patch by Dave Ellis, 22 May 2003:
+  Fix problem with only partially cleared .bss segment
+
+* Patch by Rune Torgersen, 12 May 2003:
+  get PCI to work on a MPC8266ADS board; incorporate change to
+  cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
+
+* Patch by Nye Liu, 1 May 2003:
+  minor patches for the FADS8xx
+
+* Patch by Thomas Schäfer, 28 Apr 2003:
+  Fix SPD handling for 256 ECC DIMM on Walnut
+
 * Add support for arbitrary bitmaps for TRAB's  VFD command;
   allow to pass boot bitmap addresses in environment variables;
   allow for zero boot delay
@@ -265,7 +528,7 @@ Changes for U-Boot 0.3.0:
 
 * TRAB fixes / extensions:
   - Restore VFD brightness as saved in environment
-  - add support for FGujitsu flashes
+  - add support for Fujitsu flashes
   - make sure both buzzers are turned off (drive low level)
 
 * Patches by Robert Schwebel, 06 Mar 2003:

CREDITS

@@ -66,6 +66,10 @@ N: Jonathan De Bruyne
 E: jonathan.debruyne@siemens.atea.be
 D: Port to Siemens IAD210 board
 
+N: Ken Chou
+E: kchou@ieee.org	
+D: Support for A3000 SBC board
+
 N: Conn Clark
 E: clark@esteem.com
 D: ESTEEM192E support
@@ -142,6 +146,10 @@ N: Andreas Heppel
 E: aheppel@sysgo.de
 D: CPU Support for MPC 75x; board support for Eltec BAB750 [obsolete!]
 
+N: August Hoeraendl
+E: august.hoerandl@gmx.at
+D: Support for the logodl board (PXA2xx)
+
 N: Josh Huber
 E: huber@alum.wpi.edu
 D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series.
@@ -252,7 +260,7 @@ D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots mor
 
 N: Robert Schwebel
 E: r.schwebel@pengutronix.de
-D: Support for csb226 and innokom boards (xscale)
+D: Support for csb226, logodl and innokom boards (PXA2xx)
 
 N: Rob Taylor
 E: robt@flyingpig.com
@@ -290,3 +298,7 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
+
+N: Pantelis Antoniou
+E: panto@intracom.gr
+D: NETVIA board support, ARTOS support.

MAINTAINERS

@@ -63,6 +63,9 @@ Wolfgang Denk <wd@denx.de>
 	IVMS8_128		MPC860
 	IVMS8_256		MPC860
 	LANTEC			MPC850
+	LWMON			MPC823
+	R360MPI			MPC823
+	RMU			MPC850
 	RRvision		MPC823
 	SM850			MPC850
 	SPD823TS		MPC823
@@ -72,6 +75,7 @@ Wolfgang Denk <wd@denx.de>
 	TQM855L			MPC855
 	TQM860L			MPC860
 	TQM860L_FEC		MPC860
+	TTTech			MPC823
 	c2mon			MPC855
 	hermes			MPC860
 	lwmon			MPC823
@@ -180,14 +184,19 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 
 	ADCIOP			IOP480 (PPC401)
 	AR405			PPC405GP
+	ASH405			PPC405EP
 	CANBT			PPC405CR
 	CPCI405			PPC405GP
+	CPCI4052		PPC405GP
+	CPCI405AB		PPC405GP
 	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
 	DU405			PPC405GP
 	OCRTC			PPC405GP
 	ORSG			PPC405GP
+	PCI405			PPC405GP
+	PMC405			PPC405GP
 
 Peter De Schrijver <p2@mind.be>
 

MAKEALL

@@ -31,12 +31,12 @@ LIST_8xx="	\
 	IP860		IVML24		IVML24_128	IVML24_256	\
 	IVMS8		IVMS8_128	IVMS8_256	KUP4K           \
 	LANTEC	        lwmon   	MBX		MBX860T		\
-	MHPC		MVS1		NETVIA		NX823		\
-	pcu_e		R360MPI		RPXClassic	RPXlite		\
-	RRvision	SM850		SPD823TS	svm_sc8xx	\
-	SXNI855T	TOP860		TQM823L		TQM823L_LCD	\
-	TQM850L		TQM855L		TQM860L		TTTech		\
-	v37								\
+	MHPC		MVS1		NETVIA		NETVIA_V2	\
+	NX823		pcu_e		R360MPI		RBC823		\
+	rmu		RPXClassic	RPXlite		RRvision	\
+	SM850		SPD823TS	svm_sc8xx	SXNI855T	\
+	TOP860		TQM823L		TQM823L_LCD	TQM850L		\
+	TQM855L		TQM860L		TTTech		v37		\
 "
 
 #########################################################################
@@ -44,12 +44,13 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		CANBT		CPCI405		\
-	CPCI4052 	CPCI440         CPCIISER4	CRAYL1  	\
-	DASA_SIM	DU405    	EBONY           ERIC  		\
-	MIP405  	ML2		OCRTC		ORSG		\
-	PCI405          PIP405		W7OLMC		W7OLMG          \
-	WALNUT405							\
+	ADCIOP		AR405		ASH405          BUBINGA405EP    \
+        CANBT		CPCI405		CPCI4052 	CPCI405AB       \
+        CPCI440         CPCIISER4	CRAYL1  	DASA_SIM	\
+        DU405    	EBONY           ERIC  		MIP405  	\
+        MIP405T		ML2		OCRTC		ORSG		\
+	PCI405		PIP405		PMC405          W7OLMC		\
+	W7OLMG          WALNUT405	\
 "
 
 #########################################################################
@@ -57,9 +58,9 @@ LIST_4xx="	\
 #########################################################################
 
 LIST_824x="	\
-	BMW		CPC45		CU824		MOUSSE		\
-	MUSENKI		OXC		PN62		Sandpoint8240	\
-	Sandpoint8245	utx8245						\
+        A3000           BMW		CPC45		CU824		\
+	MOUSSE          MUSENKI    	OXC		PN62		\
+	Sandpoint8240   Sandpoint8245	utx8245		\
 "
 
 #########################################################################
@@ -113,10 +114,10 @@ LIST_ARM9="at91rm9200dk smdk2400 smdk2410 trab VCMA9"
 ## Xscale Systems
 #########################################################################
 
-LIST_xscale="cradle csb226 innokom lubbock wepep250"
+LIST_pxa="cradle csb226 innokom lubbock wepep250"
 
 
-LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_xscale}"
+LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa}"
 
 #########################################################################
 ## MIPS 4Kc Systems
@@ -128,6 +129,15 @@ LIST_mips5kc="purple"
 
 LIST_mips="${LIST_mips4kc} ${LIST_mips5kc}"
 
+#########################################################################
+## i386 Systems
+#########################################################################
+
+LIST_I486="sc520_cdp sc520_spunk sc520_spunk_rel"
+
+LIST_x86="${LIST_I486}"
+
+#-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
 [ $# = 0 ] && set $LIST_ppc
@@ -149,7 +159,7 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	5xx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|xscale|mips)
+	5xx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}

Makefile

@@ -60,7 +60,11 @@ ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
 endif
 ifeq ($(ARCH),i386)
-#CROSS_COMPILE = i386-elf-
+ifeq ($(HOSTARCH),i386)
+CROSS_COMPILE =
+else
+CROSS_COMPILE = i386-linux-
+endif
 endif
 ifeq ($(ARCH),mips)
 CROSS_COMPILE = mips_4KC-
@@ -102,7 +106,7 @@ endif
 LIBS  =	board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a
+LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
@@ -298,8 +302,20 @@ MHPC_config:		unconfig
 MVS1_config :		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx mvs1
 
+xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
+
+NETVIA_V2_config \
 NETVIA_config:		unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx netvia
+	@ >include/config.h
+	@[ -z "$(findstring NETVIA_config,$@)" ] || \
+		 { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \
+		  echo "... Version 1" ; \
+		 }
+	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
+		 { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \
+		  echo "... Version 2" ; \
+		 }
+	@./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 
 NX823_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx nx823
@@ -310,12 +326,18 @@ pcu_e_config:		unconfig
 R360MPI_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
 
+RBC823_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx rbc823
+
 RPXClassic_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RPXClassic
 
 RPXlite_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
 
+rmu_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx rmu
+
 RRvision_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RRvision
 
@@ -342,10 +364,10 @@ TOP860_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx top860 emk
 
 # Play some tricks for configuration selection
-# All boards can come with 50 MHz (default), 66MHz or 80MHz clock,
+# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
 # but only 855 and 860 boards may come with FEC
 # and 823 boards may have LCD support
-xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _LCD,,$(subst _config,,$1))))
+xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
 
 FPS850L_config		\
 FPS860L_config		\
@@ -366,7 +388,8 @@ TQM860L_66MHz_config	\
 TQM860L_80MHz_config	\
 TQM862L_config		\
 TQM862L_66MHz_config	\
-TQM862L_80MHz_config:	unconfig
+TQM862L_80MHz_config	\
+TQM862M_100MHz_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring _66MHz,$@)" ] || \
 		{ echo "#define CONFIG_66MHz"		>>include/config.h ; \
@@ -376,6 +399,10 @@ TQM862L_80MHz_config:	unconfig
 		{ echo "#define CONFIG_80MHz"		>>include/config.h ; \
 		  echo "... with 80MHz system clock" ; \
 		}
+	@[ -z "$(findstring _100MHz,$@)" ] || \
+		{ echo "#define CONFIG_100MHz"		>>include/config.h ; \
+		  echo "... with 100MHz system clock" ; \
+		}
 	@[ -z "$(findstring _LCD,$@)" ] || \
 		{ echo "#define CONFIG_LCD"		>>include/config.h ; \
 		  echo "#define CONFIG_NEC_NL6648BC20"	>>include/config.h ; \
@@ -403,11 +430,18 @@ ADCIOP_config:	unconfig
 AR405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
 
+ASH405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
+
+BUBINGA405EP_config:unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
 
-CPCI405_config		\
-CPCI4052_config:	unconfig
+CPCI405_config	\
+CPCI4052_config	\
+CPCI405AB_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
 	@echo "BOARD_REVISION = $(@:_config=)"	>>include/config.mk
 
@@ -435,6 +469,11 @@ ERIC_config:unconfig
 MIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
 
+MIP405T_config:unconfig
+	@echo "#define CONFIG_MIP405T" >include/config.h
+	@echo "Enable subset config for MIP405T"
+	@./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
+
 ML2_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml2
 
@@ -448,6 +487,9 @@ PCI405_config:	unconfig
 PIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
 
+PMC405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+
 W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
@@ -460,6 +502,9 @@ WALNUT405_config:unconfig
 #########################################################################
 xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
 
+A3000_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x a3000
+
 BMW_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x bmw
 
@@ -696,19 +741,22 @@ ep7312_config	:	unconfig
 #########################################################################
 
 cradle_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale cradle
+	@./mkconfig $(@:_config=) arm pxa cradle 
 
 csb226_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale csb226
+	@./mkconfig $(@:_config=) arm pxa csb226
 
 innokom_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale innokom
+	@./mkconfig $(@:_config=) arm pxa innokom
 
 lubbock_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale lubbock
+	@./mkconfig $(@:_config=) arm pxa lubbock
+
+logodl_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa logodl
 
 wepep250_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale wepep250
+	@./mkconfig $(@:_config=) arm pxa wepep250
 
 #========================================================================
 # i386
@@ -719,6 +767,12 @@ wepep250_config	:	unconfig
 sc520_cdp_config	:	unconfig
 	@./mkconfig $(@:_config=) i386 i386 sc520_cdp
 
+sc520_spunk_config	:	unconfig
+	@./mkconfig $(@:_config=) i386 i386 sc520_spunk
+
+sc520_spunk_rel_config	:	unconfig
+	@./mkconfig $(@:_config=) i386 i386 sc520_spunk
+
 #========================================================================
 # MIPS
 #========================================================================
@@ -742,7 +796,8 @@ clean:
 		| xargs rm -f
 	rm -f examples/hello_world examples/timer \
 	      examples/eepro100_eeprom examples/sched \
-	      examples/mem_to_mem_idma2intr
+	      examples/mem_to_mem_idma2intr examples/82559_eeprom
+
 	rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
 	rm -f tools/easylogo/easylogo tools/bmp_logo
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
@@ -759,7 +814,7 @@ clobber:	clean
 	rm -f u-boot u-boot.bin u-boot.srec u-boot.map System.map
 	rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
 	rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
-	rm -f include/asm/arch include/asm
+	rm -f include/asm/proc include/asm/arch include/asm
 
 mrproper \
 distclean:	clobber unconfig

README

@@ -151,6 +151,7 @@ Directory Hierarchy:
 - board/RPXClassic
 		Files specific to RPXClassic boards
 - board/RPXlite	Files specific to RPXlite    boards
+- board/at91rm9200dk Files specific to AT91RM9200DK boards
 - board/c2mon	Files specific to c2mon	     boards
 - board/cmi	Files specific to cmi        boards
 - board/cogent	Files specific to Cogent     boards
@@ -300,6 +301,7 @@ The following options need to be configured:
 	or	CONFIG_405GP
 	or	CONFIG_440
 	or	CONFIG_MPC74xx
+	or	CONFIG_750FX
 
 		ARM based CPUs:
 		---------------
@@ -344,7 +346,7 @@ The following options need to be configured:
 		CONFIG_IAD210,     CONFIG_RPXlite,    CONFIG_sbc8260,
 		CONFIG_EBONY,      CONFIG_sacsng,     CONFIG_FPS860L,
 		CONFIG_V37,        CONFIG_ELPT860,    CONFIG_CMI,
-		CONFIG_NETVIA
+		CONFIG_NETVIA,     CONFIG_RBC823
 
 		ARM based boards:
 		-----------------
@@ -352,7 +354,7 @@ The following options need to be configured:
 		CONFIG_HHP_CRADLE,  CONFIG_DNP1110,    CONFIG_EP7312,
 		CONFIG_IMPA7,       CONFIG_LART,       CONFIG_LUBBOCK,
 		CONFIG_SHANNON,     CONFIG_SMDK2400,   CONFIG_SMDK2410,
-		CONFIG_TRAB
+		CONFIG_TRAB,	    CONFIG_AT91RM9200DK
 
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -470,6 +472,13 @@ The following options need to be configured:
 		Set to 0 to disable this feature (this is the default).
 		This will also disable hardware handshake.
 
+- Console UART Number:
+		CONFIG_UART1_CONSOLE
+
+		IBM PPC4xx only.
+		If defined internal UART1 (and not UART0) is used
+		as default U-Boot console.
+
 - Boot Delay:	CONFIG_BOOTDELAY - in seconds
 		Delay before automatically booting the default image;
 		set to -1 to disable autoboot.
@@ -558,6 +567,7 @@ The following options need to be configured:
 		CFG_CMD_ELF	  bootelf, bootvx
 		CFG_CMD_ENV	  saveenv
 		CFG_CMD_FDC	* Floppy Disk Support
+		CFG_CMD_FAT	  FAT partition support
 		CFG_CMD_FDOS	* Dos diskette Support
 		CFG_CMD_FLASH	  flinfo, erase, protect
 		CFG_CMD_FPGA	  FPGA device initialization support
@@ -571,6 +581,7 @@ The following options need to be configured:
 		CFG_CMD_LOADS	  loads
 		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
 				  loop, mtest
+		CFG_CMD_MMC	  MMC memory mapped support
 		CFG_CMD_MII	  MII utility commands
 		CFG_CMD_NET	  bootp, tftpboot, rarpboot
 		CFG_CMD_PCI	* pciinfo
@@ -681,6 +692,9 @@ The following options need to be configured:
 		CFG_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
 
 - NETWORK Support (PCI):
+		CONFIG_E1000
+		Support for Intel 8254x gigabit chips.
+
 		CONFIG_EEPRO100
 		Support for Intel 82557/82559/82559ER chips.
 		Optional CONFIG_EEPRO100_SROM_WRITE enables eeprom
@@ -720,6 +734,14 @@ The following options need to be configured:
 		Supported are USB Keyboards and USB Floppy drives
 		(TEAC FD-05PUB).
 
+- MMC Support:
+  		The MMC controller on the Intel PXA is supported. To
+		enable this define CONFIG_MMC. The MMC can be 
+		accessed from the boot prompt by mapping the device 
+		to physical memory similar to flash. Command line is
+		enabled with CFG_CMD_MMC. The MMC driver also works with
+		the FAT fs. This is enabled with CFG_CMD_FAT. 
+
 - Keyboard Support:
 		CONFIG_ISA_KEYBOARD
 
@@ -759,6 +781,13 @@ The following options need to be configured:
 		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
 		or CONFIG_VIDEO_SED13806_16BPP
 
+- Keyboard Support:
+                CONFIG_KEYBOARD
+
+                Define this to enable a custom keyboard support.
+                This simply calls drv_keyboard_init() which must be
+                defined in your board-specific files.
+                The only board using this so far is RBC823.
 
 - LCD Support:	CONFIG_LCD
 
@@ -1176,13 +1205,13 @@ The following options need to be configured:
 
 	Note:
 
-		In the current implementation, the local variables
-		space and global environment variables space are
-		separated. Local variables are those you define by
-		simply typing like `name=value'. To access a local
-		variable later on, you have write `$name' or
-		`${name}'; variable directly by typing say `$name' at
-		the command prompt.
+                In the current implementation, the local variables
+                space and global environment variables space are
+                separated. Local variables are those you define by
+                simply typing `name=value'. To access a local
+                variable later on, you have write `$name' or
+                `${name}'; to execute the contents of a variable
+                directly type `$name' at the command prompt.
 
 		Global environment variables are those you use
 		setenv/printenv to work with. To run a command stored
@@ -1221,6 +1250,13 @@ The following options need to be configured:
 		the environment like the autoscript function or the
 		boot command first.
 
+- DataFlash Support
+		CONFIG_HAS_DATAFLASH
+
+                Defining this option enables DataFlash features and
+                allows to read/write in Dataflash via the standard
+                commands cp, md...
+
 - Show boot progress
 		CONFIG_SHOW_BOOT_PROGRESS
 
@@ -1382,7 +1418,10 @@ Configuration Settings:
 		CFG_FLASH_BASE when booting from flash.
 
 - CFG_MONITOR_LEN:
-		Size of memory reserved for monitor code
+                Size of memory reserved for monitor code, used to
+                determine _at_compile_time_ (!) if the environment is
+                embedded within the U-Boot image, or in a separate
+                flash sector.
 
 - CFG_MALLOC_LEN:
 		Size of DRAM reserved for malloc() use.
@@ -1422,6 +1461,14 @@ Configuration Settings:
 		Define if the flash driver uses extra elements in the
 		common flash structure for storing flash geometry
 
+- CFG_RX_ETH_BUFFER:
+		Defines the number of ethernet receive buffers. On some
+		ethernet controllers it is recommended to set this value
+		to 8 or even higher (EEPRO100 or 405 EMAC), since all
+		buffers can be full shortly after enabling the interface
+		on high ethernet traffic.
+		Defaults to 4 if not defined.
+
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
@@ -1710,6 +1757,16 @@ Low Level (hardware related) configuration options:
 		#define'd default value in commproc.h resp.
 		cpm_8260.h.
 
+- CFG_PCI_SLV_MEM_LOCAL, CFG_PCI_SLV_MEM_BUS, CFG_PICMR0_MASK_ATTRIB,
+  CFG_PCI_MSTR0_LOCAL, CFG_PCIMSK0_MASK, CFG_PCI_MSTR1_LOCAL,
+  CFG_PCIMSK1_MASK, CFG_PCI_MSTR_MEM_LOCAL, CFG_PCI_MSTR_MEM_BUS,
+  CFG_CPU_PCI_MEM_START, CFG_PCI_MSTR_MEM_SIZE, CFG_POCMR0_MASK_ATTRIB,
+  CFG_PCI_MSTR_MEMIO_LOCAL, CFG_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START,
+  CFG_PCI_MSTR_MEMIO_SIZE, CFG_POCMR1_MASK_ATTRIB, CFG_PCI_MSTR_IO_LOCAL,
+  CFG_PCI_MSTR_IO_BUS, CFG_CPU_PCI_IO_START, CFG_PCI_MSTR_IO_SIZE,
+  CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
+		Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
+
 Building the Software:
 ======================
 
@@ -1753,6 +1810,7 @@ configurations; the following names are supported:
     GENIETV_config	  TQM823L_config	PIP405_config
     GEN860T_config	  EBONY_config		FPS860L_config
     ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
+    at91rm9200dk_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for
@@ -1971,6 +2029,14 @@ Some configuration options can be set using Environment Variables:
 
 		  setenv initrd_high 00c00000
 
+                  If you set initrd_high to 0xFFFFFFFF, this is an
+                  indication to U-Boot that all addresses are legal
+                  for the Linux kernel, including addresses in flash
+                  memory. In this case U-Boot will NOT COPY the
+                  ramdisk at all. This may be useful to reduce the
+                  boot time on your system, but requires that this
+                  feature is supported by your Linux kernel.
+
   ipaddr	- IP address; needed for tftpboot command
 
   loadaddr	- Default load address for commands like "bootp",
@@ -2023,6 +2089,48 @@ Please note that changes to some configuration parameters may take
 only effect after the next boot (yes, that's just like Windoze :-).
 
 
+Command Line Parsing:
+=====================
+
+There are two different command line parsers available  with  U-Boot:
+the old "simple" one, and the much more pwerful "hush" shell:
+
+Old, simple command line parser:
+--------------------------------
+
+- supports environment variables (through setenv / saveenv commands)
+- several commands on one line, separated by ';'
+- variable substitution using "... $(name) ..." syntax
+- special characters ('$', ';') can be escaped by prefixing with '\',
+  for example:
+	setenv bootcmd bootm \$(address)
+- You can also escape text by enclosing in single apostrophes, for example:
+	setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
+
+Hush shell:
+-----------
+
+- similar to Bourne shell, with control structures like
+  if...then...else...fi, for...do...done; while...do...done,
+  until...do...done, ...
+- supports environment ("global") variables (through setenv / saveenv
+  commands) and local shell variables (through standard shell syntax
+  "name=value"); only environment variables can be used with "run"
+  command
+
+General rules:
+--------------
+
+(1) If a command line (or an environment variable executed by a "run"
+    command) contains several commands separated by semicolon, and
+    one of these commands fails, then the remaining commands will be
+    executed anyway.
+
+(2) If you execute several variables with one call to run (i. e.
+    calling run with a list af variables as arguments), any failing
+    command will cause "run" to terminate, i. e. the remaining
+    variables are not executed.
+
 Note for Redundant Ethernet Interfaces:
 =======================================
 
@@ -2538,12 +2646,20 @@ Minicom warning:
 ================
 
 Over time, many people have reported problems when trying to used the
-"minicom" terminal emulation program  for  serial  download.  I  (wd)
-consider  minicom  to  be  broken, and recommend not to use it. Under
-Unix, I recommend  to  use  CKermit  for  general  purpose  use  (and
+"minicom" terminal emulation program for serial download. I (wd)
+consider minicom to be broken, and recommend not to use it. Under
+Unix, I recommend to use C-Kermit for general purpose use (and
 especially for kermit binary protocol download ("loadb" command), and
 use "cu" for S-Record download ("loads" command).
 
+Nevertheless, if you absolutely want to use it try adding this
+configuration to your "File transfer protocols" section:
+
+	   Name    Program                      Name U/D FullScr IO-Red. Multi
+	X  kermit  /usr/bin/kermit -i -l %l -s   Y    U    Y       N      N
+	Y  kermit  /usr/bin/kermit -i -l %l -r   N    D    Y       N      N
+
+
 NetBSD Notes:
 =============
 
@@ -2895,6 +3011,13 @@ it:
   We accept patches as plain text, MIME attachments or as uuencoded
   gzipped text.
 
+* If one logical set of modifications affects or creates several
+  files, all these changes shall be submitted in a SINGLE patch file.
+
+* Changesets that contain different, unrelated modifications shall be
+  submitted as SEPARATE patches, one patch per changeset.
+  
+
 Notes:
 
 * Before sending the patch, run the MAKEALL script on your patched

board/LEOX/elpt860/flash.c

@@ -118,7 +118,7 @@ flash_init (void)
   /* monitor protection ON by default */
   flash_protect (FLAG_PROTECT_SET,
 		 CFG_MONITOR_BASE,
-		 CFG_MONITOR_BASE + CFG_MONITOR_LEN-1,
+		 CFG_MONITOR_BASE + monitor_flash_len-1,
 		 &flash_info[0]);
 #endif
   

board/LEOX/elpt860/u-boot.lds

@@ -90,6 +90,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/MAI/AmigaOneG3SE/flash_new.c

@@ -120,7 +120,7 @@ unsigned long flash_init (void)
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
 			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+			      CFG_MONITOR_BASE + monitor_flash_len - 1,
 			      &flash_info[0]);
 #endif
 

board/MAI/AmigaOneG3SE/u-boot.lds

@@ -75,6 +75,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/MAI/bios_emulator/scitech/src/v86bios/command.c

@@ -36,6 +36,3 @@ getline(char *buf,int *num,int max_num)
     line_pointer = line_pointer + *num;
     len = len - *num;
 }
-
-
-

board/RPXClassic/flash.c

@@ -64,7 +64,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 

board/RPXClassic/u-boot.lds

@@ -77,6 +77,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/RPXlite/flash.c

@@ -85,7 +85,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 

board/RPXlite/u-boot.lds

@@ -77,6 +77,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/RRvision/flash.c

@@ -73,7 +73,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 

board/RRvision/u-boot.lds

@@ -79,6 +79,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/a3000/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS 	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/a3000/README

@@ -0,0 +1,18 @@
+U-Boot for Artis SBC-A3000
+---------------------------
+
+Artis SBC-A3000 has one flash socket that the user uses Intel 28F128J3A (16MB)
+or 28F064J3A (8MB) chips.
+
+In board's notation, bank 0 is the one at the address of 0xFF000000.
+bank 1 is the one at the address of 0xFF800000
+
+On power-up the processor jumps to the address of 0xFFF00100, the last
+megabyte of the bank 0 of flash.
+
+Thus, U-Boot is configured to reside in flash starting at the address of
+0xFFF00000.  The environment space is located in flash separately from
+U-Boot, at the address of 0xFFFE0000.
+
+There is a National ns83815 10/100M ethernet controller on-board.
+

board/a3000/a3000.c

@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2001
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <pci.h>
+
+int checkboard (void)
+{
+	ulong busfreq  = get_bus_freq(0);
+	char  buf[32];
+
+	printf("Board: A3000 Local Bus at %s MHz\n", strmhz(buf, busfreq));
+	return 0;
+
+}
+
+long int initdram (int board_type)
+{
+	int              i, cnt;
+	volatile uchar * base= CFG_SDRAM_BASE;
+	volatile ulong * addr;
+	ulong            save[32];
+	ulong            val, ret  = 0;
+
+	for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = (volatile ulong *)base + cnt;
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	addr = (volatile ulong *)base;
+	save[i] = *addr;
+	*addr = 0;
+
+	if (*addr != 0) {
+		*addr = save[i];
+		goto Done;
+	}
+
+	for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
+		addr = (volatile ulong *)base + cnt;
+		val = *addr;
+		*addr = save[--i];
+		if (val != ~cnt) {
+			ulong new_bank0_end = cnt * sizeof(long) - 1;
+			ulong mear1  = mpc824x_mpc107_getreg(MEAR1);
+			ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
+			mear1 =  (mear1  & 0xFFFFFF00) |
+			  ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+			emear1 = (emear1 & 0xFFFFFF00) |
+			  ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
+			mpc824x_mpc107_setreg(MEAR1,  mear1);
+			mpc824x_mpc107_setreg(EMEAR1, emear1);
+
+			ret = cnt * sizeof(long);
+			goto Done;
+		}
+	}
+
+	ret = CFG_MAX_RAM_SIZE;
+Done:
+	return ret;
+}
+
+/*
+ * Initialize PCI Devices
+ */
+#if 1
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_a3000_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  0x0, 0x0, 0x0, /* unknown eth0 divice */
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_IO |
+				       PCI_COMMAND_MEMORY |
+				       PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  0x0, 0x0, 0x0, /* unknown eth1 device */
+	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
+				       PCI_ENET1_MEMADDR,
+				       PCI_COMMAND_IO |
+				       PCI_COMMAND_MEMORY |
+				       PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  0x0, 0x0, 0x0, /* unknown eth1 device */
+	  pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
+				       PCI_ENET2_MEMADDR,
+				       PCI_COMMAND_IO |
+				       PCI_COMMAND_MEMORY |
+				       PCI_COMMAND_MASTER }},
+	{ }
+};
+#endif
+
+#else
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_a3000_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
+				       PCI_ENET1_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ }
+};
+#endif
+
+#endif
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_a3000_config_table,
+#endif
+};
+
+void pci_init_board(void)
+{
+	pci_mpc824x_init(&hose);
+}

board/a3000/config.mk

@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2000, 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Artis A-3000 boards
+#
+
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)

board/a3000/flash.c

@@ -0,0 +1,454 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mpc824x.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+
+/*---------------------------------------------------------------------*/
+#define DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, uchar *dest, uchar data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#define BS(b)     (b)
+#define BYTEME(x) ((x) & 0xFF)
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long flash_banks[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS;
+	unsigned long size, size_b[CFG_MAX_FLASH_BANKS];
+
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) 
+	{
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+		DEBUGF("Get flash bank %d @ 0x%08lx\n", i, flash_banks[i]);
+/*
+		size_b[i] = flash_get_size((vu_char *)flash_banks[i], &flash_info[i]);
+*/
+		size_b[i] = flash_get_size((vu_char *) 0xff800000 , &flash_info[i]);
+
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) 
+		{
+			printf ("## Unknown FLASH on Bank %d: "
+				"ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+				i, flash_info[i].flash_id,
+				size_b[i], size_b[i]<<20);
+		}
+		else
+		{
+			DEBUGF("## Flash bank %d at 0x%08lx sizes: 0x%08lx \n",
+				i, flash_banks[i], size_b[i]);
+
+			flash_get_offsets (flash_banks[i], &flash_info[i]);
+			flash_info[i].size = size_b[i];
+		}
+	}
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN);
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+
+	size = 0;
+	DEBUGF("## Final Flash bank sizes: ");
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) 
+	{
+		DEBUGF("%08lx ", size_b[i]);
+		size += size_b[i];
+	}
+	DEBUGF("\n");
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case FLASH_MAN_INTEL:
+		    for (i = 0; i < info->sector_count; i++) {
+				info->start[i] = base;
+				base += 0x00020000;		/* 128k per bank */
+		    }
+		    return;
+
+		default:
+		    printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
+		    return;
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("Fujitsu ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("STM ");		break;
+	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
+	case FLASH_MAN_MT:	printf ("MT ");			break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F320J3A:	
+			printf ("28F320J3A (32Mbit = 128K x 32)\n");
+			break;
+	case FLASH_28F640J3A:	
+			printf ("28F640J3A (64Mbit = 128K x 64)\n");
+			break;
+	case FLASH_28F128J3A:	
+			printf ("28F128J3A (128Mbit = 128K x 128)\n");
+			break;
+	default:		
+			printf ("Unknown Chip Type\n");
+			break;
+	}
+
+#if 1
+	if (info->size >= (1 << 20)) {
+		i = 20;
+	} else {
+		i = 10;
+	}
+	printf ("  Size: %ld %cB in %d Sectors\n",
+		info->size >> i,
+		(i == 20) ? 'M' : 'k',
+		info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+#endif
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info)
+{
+	vu_char manuf, device;
+
+	addr[0] = BS(0x90);
+	manuf = BS(addr[0]);
+	DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, manuf);
+
+	switch (manuf) {
+	case BYTEME(AMD_MANUFACT):
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case BYTEME(FUJ_MANUFACT):
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case BYTEME(SST_MANUFACT):
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case BYTEME(STM_MANUFACT):
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	case BYTEME(INTEL_MANUFACT):
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = BS(0xFF);		/* restore read mode, (yes, BS is a NOP) */
+		return 0;			/* no or unknown flash	*/
+	}
+
+	device = BS(addr[2]);			/* device ID		*/
+
+	DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", (ulong)(&addr[1]), device);
+
+	switch (device) {
+	case BYTEME(INTEL_ID_28F320J3A):
+		info->flash_id += FLASH_28F320J3A;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		break;				/* =>  4 MB		*/
+
+	case BYTEME(INTEL_ID_28F640J3A):
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+
+	case BYTEME(INTEL_ID_28F128J3A):
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x01000000;
+		break;				/* => 16 MB		*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		addr[0] = BS(0xFF);		/* restore read mode (yes, a NOP) */
+		return 0;			/* => no or unknown flash */
+
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+			info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = BS(0xFF);		/* restore read mode */
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+		printf ("Can erase only Intel flash types - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+	} else {
+		printf ("\n");
+	}
+
+	start = get_timer (0);
+	last  = start;
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_char *addr = (vu_char *)(info->start[sect]);
+			unsigned long status;
+
+			/* Disable interrupts which might cause a timeout here */
+			flag = disable_interrupts();
+
+			*addr = BS(0x50);	/* clear status register */
+			*addr = BS(0x20);	/* erase setup */
+			*addr = BS(0xD0);	/* erase confirm */
+
+			/* re-enable interrupts if necessary */
+			if (flag) {
+				enable_interrupts();
+			}
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+
+			while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = BS(0xB0); /* suspend erase	  */
+					*addr = BS(0xFF); /* reset to read mode */
+					return 1;
+				}
+
+				/* show that we're waiting */
+				if ((now - last) > 1000) {	/* every second */
+					putc ('.');
+					last = now;
+				}
+			}
+
+			*addr = BS(0xFF);	/* reset to read mode */
+		}
+	}
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define	FLASH_WIDTH	1	/* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	uchar *wp = (uchar *)addr;
+	int rc;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+
+	while (cnt > 0) {
+		if ((rc = write_data(info, wp, *src)) != 0) {
+			return rc;
+		}
+		wp++;
+		src++;
+		cnt--;
+	}
+
+	return cnt;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, uchar *dest, uchar data)
+{
+	vu_char *addr = (vu_char *)dest;
+	ulong status;
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((BS(*addr) & data) != data) {
+		return 2;
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	*addr = BS(0x40);		/* write setup */
+	*addr = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag) {
+		enable_interrupts();
+	}
+
+	start = get_timer (0);
+
+	while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			*addr = BS(0xFF);	/* restore read mode */
+			return 1;
+		}
+	}
+
+	*addr = BS(0xFF);	/* restore read mode */
+
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */

board/a3000/u-boot.lds

@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc824x/start.o		(.text)
+    lib_ppc/board.o		(.text)
+    lib_ppc/ppcstring.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+	. = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o (.text)
+
+	*(.text)
+
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
+

board/at91rm9200dk/at91rm9200dk.c

@@ -30,28 +30,35 @@
  * Miscelaneous platform dependent initialisations
  */
 
-int board_init(void)
-  {
-  DECLARE_GLOBAL_DATA_PTR;
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
 
-    /* memory and cpu-speed are setup before relocation */
-    /* so we do _nothing_ here */
+	/* Enable Ctrlc */
+	console_init_f ();
 
-    /* arch number of AT91RM9200DK-Board */
-    gd->bd->bi_arch_number = 251;
-    /* adress of boot parameters */
-    gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	/* Correct IRDA resistor problem */
+	/* Set PA23_TXD in Output */
+	(AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
 
-    return 0;
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of AT91RM9200DK-Board */
+	gd->bd->bi_arch_number = 251;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
 }
 
-int dram_init(void)
+int dram_init (void)
 {
-  DECLARE_GLOBAL_DATA_PTR;
+	DECLARE_GLOBAL_DATA_PTR;
 
-  gd->bd->bi_dram[0].start = PHYS_SDRAM;
-  gd->bd->bi_dram[0].size  = PHYS_SDRAM_SIZE;
-  return 0;
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
 }
 
 /*
@@ -59,47 +66,47 @@ int dram_init(void)
  * The NAND lives in the CS2* space
  */
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
-extern void
-nand_probe(ulong physadr);
+extern void nand_probe (ulong physadr);
 
-#define AT91_SMARTMEDIA_BASE 0x40000000  /* physical address to access memory on NCS3 */
-void
-nand_init(void)
+#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
+void nand_init (void)
 {
 	/* Setup Smart Media, fitst enable the address range of CS3 */
-        *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
-        /* set the bus interface characteristics based on
-           tDS Data Set up Time 30 - ns
-           tDH Data Hold Time 20 - ns
-           tALS ALE Set up Time 20 - ns
-           16ns at 60 MHz ~= 3  */
+	*AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
+	/* set the bus interface characteristics based on
+	   tDS Data Set up Time 30 - ns
+	   tDH Data Hold Time 20 - ns
+	   tALS ALE Set up Time 20 - ns
+	   16ns at 60 MHz ~= 3  */
 /*memory mapping structures */
 #define SM_ID_RWH	(5 << 28)
 #define SM_RWH		(1 << 28)
 #define SM_RWS		(0 << 24)
 #define SM_TDF		(1 << 8)
 #define SM_NWS		(3)
-        AT91C_BASE_SMC2->SMC2_CSR[3] = ( SM_RWH|SM_RWS | AT91C_SMC2_ACSS_STANDARD |
-                                         AT91C_SMC2_DBW_8 | SM_TDF |
-                                         AT91C_SMC2_WSEN | SM_NWS);
+	AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
+		AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
+		SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
 
-        /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
-        *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE;
-        *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE;
+	/* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
+	*AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+		AT91C_PC3_BFBAA_SMWE;
+	*AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+		AT91C_PC3_BFBAA_SMWE;
 
 	/* Configure PC2 as input (signal READY of the SmartMedia) */
-        *AT91C_PIOC_PER = AT91C_PC2_BFAVD;  /* enable direct output enable */
-        *AT91C_PIOC_ODR = AT91C_PC2_BFAVD;  /* disable output */
+	*AT91C_PIOC_PER = AT91C_PC2_BFAVD;	/* enable direct output enable */
+	*AT91C_PIOC_ODR = AT91C_PC2_BFAVD;	/* disable output */
 
 	/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
-        *AT91C_PIOB_PER = AT91C_PIO_PB1;  /* enable direct output enable */
-        *AT91C_PIOB_ODR = AT91C_PIO_PB1;  /* disable output */
+	*AT91C_PIOB_PER = AT91C_PIO_PB1;	/* enable direct output enable */
+	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */
 
-        if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-          printf ("No ");
-        printf ("SmartMedia card inserted\n");
+	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
+		printf ("No ");
+	printf ("SmartMedia card inserted\n");
 
-	printf("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
-	nand_probe(AT91_SMARTMEDIA_BASE);
+	printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
+	nand_probe (AT91_SMARTMEDIA_BASE);
 }
 #endif

board/at91rm9200dk/config.mk

@@ -1,2 +1,2 @@
-TEXT_BASE = 0x21fa0000
+TEXT_BASE = 0x21f00000
 

board/at91rm9200dk/flash.c

@@ -31,11 +31,40 @@
 ulong myflush(void);
 
 
+/* Flash Organization Structure */
+typedef struct OrgDef
+{
+	unsigned int sector_number;
+	unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgAT49BV16x4[] =
+{
+	{ 8, 8*1024 }, /* 8 * 8kBytes sectors */
+	{ 2, 32*1024 }, /* 2 * 32kBytes sectors */	
+	{ 30, 64*1024 } /* 30 * 64kBytes sectors */	
+};
+
+OrgDef OrgAT49BV16x4A[] =
+{
+	{ 8, 8*1024 }, /* 8 * 8kBytes sectors */	
+	{ 31, 64*1024 } /* 31 * 64kBytes sectors */	
+};
+
+
 #define FLASH_BANK_SIZE 0x200000	/* 2 MB */
 #define MAIN_SECT_SIZE  0x10000		/* 64 KB */
 
 flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 
+/* AT49BV1614A Codes */
+#define FLASH_CODE1		0xAA
+#define FLASH_CODE2		0x55
+#define ID_IN_CODE		0x90
+#define ID_OUT_CODE		0xF0
+
 
 #define CMD_READ_ARRAY		0x00F0
 #define CMD_UNLOCK1		0x00AA
@@ -48,6 +77,9 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 #define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
 #define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
 
+#define IDENT_FLASH_ADDR1	(*(volatile u16 *)(CFG_FLASH_BASE + (0x0000555<<1)))
+#define IDENT_FLASH_ADDR2	(*(volatile u16 *)(CFG_FLASH_BASE + (0x0000AAA<<1)))
+
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
 #define BIT_PROGRAM_ERROR	0x0020
@@ -59,339 +91,375 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 
 /*-----------------------------------------------------------------------
  */
-
-ulong flash_init(void)
+void flash_identification (flash_info_t * info)
 {
-    int i, j;
-    ulong size = 0;
+	volatile u16 manuf_code, device_code, add_device_code;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
-    {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (ATM_MANUFACT & FLASH_VENDMASK) |
-	  (ATM_ID_BV1614 & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-	if (i == 0)
-	  flashbase = PHYS_FLASH_1;
-	else
-	  panic("configured to many flash banks!\n");
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
+	IDENT_FLASH_ADDR1 = FLASH_CODE1;
+	IDENT_FLASH_ADDR2 = FLASH_CODE2;
+	IDENT_FLASH_ADDR1 = ID_IN_CODE;
 
-	    if (j <= 9)
-	    {
-		/* 1st to 8th are 8 KB */
-		if (j <= 7)
-		{
-		    flash_info[i].start[j] = flashbase + j*0x2000;
+	manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
+	device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
+	add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+
+	IDENT_FLASH_ADDR1 = FLASH_CODE1;
+	IDENT_FLASH_ADDR2 = FLASH_CODE2;
+	IDENT_FLASH_ADDR1 = ID_OUT_CODE;
+
+	/* Vendor type */
+	info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
+	printf ("Atmel: ");
+
+	if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
+
+		if ((add_device_code & FLASH_TYPEMASK) ==
+			(ATM_ID_BV1614A & FLASH_TYPEMASK)) {
+			info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
+			printf ("AT49BV1614A (16Mbit)\n");
 		}
 
-		/* 9th and 10th are both 32 KB */
-		if ((j == 8) || (j == 9))
-		{
-			flash_info[i].start[j] = flashbase + 0x10000 + (j-8)*0x8000;
-		}
-	    }
-	    else
-	    {
-		flash_info[i].start[j] = flashbase + (j-8)*MAIN_SECT_SIZE;
-	    }
+	} else {				/* AT49BV1614 Flash */
+		info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
+		printf ("AT49BV1614 (16Mbit)\n");
 	}
-	size += flash_info[i].size;
-    }
+}
 
-    flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_ENV_ADDR - 1,
-		  &flash_info[0]);
 
-    flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-		  &flash_info[0]);
+ulong flash_init (void)
+{
+	int i, j, k;
+	unsigned int flash_nb_blocks, sector;
+	unsigned int start_address;
+	OrgDef *pOrgDef;
 
-    return size;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		flash_identification (&flash_info[i]);
+
+		flash_info[i].size = FLASH_BANK_SIZE;
+
+		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV1614 & FLASH_TYPEMASK)) {
+			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+			pOrgDef = OrgAT49BV16x4;
+			flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
+		} else {			/* AT49BV1614A Flash */
+			flash_info[i].sector_count = CFG_MAX_FLASH_SECT - 1;
+			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT - 1);
+
+			pOrgDef = OrgAT49BV16x4A;
+			flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
+		}
+
+		if (i == 0)
+			flashbase = PHYS_FLASH_1;
+		else
+			panic ("configured to many flash banks!\n");
+
+		sector = 0;
+		start_address = flashbase;
+
+		for (j = 0; j < flash_nb_blocks; j++) {
+			for (k = 0; k < pOrgDef[j].sector_number; k++) {
+				flash_info[i].start[sector++] = start_address;
+				start_address += pOrgDef[j].sector_size;
+			}
+		}
+
+		size += flash_info[i].size;
+	}
+
+	/* Protect binary boot image */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+
+	/* Protect environment variables */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	/* Protect U-Boot gzipped image */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_U_BOOT_BASE,
+		       CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+
+	return size;
 }
 
 /*-----------------------------------------------------------------------
  */
-void flash_print_info  (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
 {
-    int i;
+	int i;
 
-    switch (info->flash_id & FLASH_VENDMASK)
-    {
-    case (ATM_MANUFACT & FLASH_VENDMASK):
-	printf("Atmel: ");
-	break;
-    default:
-	printf("Unknown Vendor ");
-	break;
-    }
-
-    switch (info->flash_id & FLASH_TYPEMASK)
-    {
-    case (ATM_ID_BV1614 & FLASH_TYPEMASK):
-	printf("AT49BV1614 (16Mbit)\n");
-	break;
-    default:
-	printf("Unknown Chip Type\n");
-	goto Done;
-	break;
-    }
-
-    printf("  Size: %ld MB in %d Sectors\n",
-	   info->size >> 20, info->sector_count);
-
-    printf("  Sector Start Addresses:");
-    for (i = 0; i < info->sector_count; i++)
-    {
-	if ((i % 5) == 0)
-	{
-	    printf ("\n   ");
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (ATM_MANUFACT & FLASH_VENDMASK):
+		printf ("Atmel: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
 	}
-	printf (" %08lX%s", info->start[i],
-		info->protect[i] ? " (RO)" : "     ");
-    }
-    printf ("\n");
 
-Done:
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (ATM_ID_BV1614 & FLASH_TYPEMASK):
+		printf ("AT49BV1614 (16Mbit)\n");
+		break;
+	case (ATM_ID_BV1614A & FLASH_TYPEMASK):
+		printf ("AT49BV1614A (16Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		goto Done;
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+
+  Done:
 }
 
 /*-----------------------------------------------------------------------
  */
 
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
-    ulong result;
-    int iflag, cflag, prot, sect;
-    int rc = ERR_OK;
-    int chip1;
+	ulong result;
+	int iflag, cflag, prot, sect;
+	int rc = ERR_OK;
+	int chip1;
 
-    /* first look for protection bits */
+	/* first look for protection bits */
 
-    if (info->flash_id == FLASH_UNKNOWN)
-	return ERR_UNKNOWN_FLASH_TYPE;
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
 
-    if ((s_first < 0) || (s_first > s_last)) {
-	return ERR_INVAL;
-    }
-
-    if ((info->flash_id & FLASH_VENDMASK) !=
-	(ATM_MANUFACT & FLASH_VENDMASK)) {
-	return ERR_UNKNOWN_FLASH_VENDOR;
-    }
-
-    prot = 0;
-    for (sect=s_first; sect<=s_last; ++sect) {
-	if (info->protect[sect]) {
-	    prot++;
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
 	}
-    }
-    if (prot)
-	return ERR_PROTECTED;
 
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    cflag = icache_status();
-    icache_disable();
-    iflag = disable_interrupts();
+	if ((info->flash_id & FLASH_VENDMASK) !=
+		(ATM_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
 
-    /* Start erase on unprotected sectors */
-    for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
-    {
-	printf("Erasing sector %2d ... ", sect);
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-
-	if (info->protect[sect] == 0)
-	{	/* not protected */
-	    volatile u16 *addr = (volatile u16 *)(info->start[sect]);
-
-	    MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	    MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	    MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-	    MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	    MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	    *addr = CMD_ERASE_CONFIRM;
-
-	    /* wait until flash is ready */
-	    chip1 = 0;
-
-	    do
-	    {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
-		{
-		    MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-		    chip1 = TMO;
-		    break;
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
 		}
-
-		if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
-			chip1 = READY;
-
-	    }  while (!chip1);
-
-	    MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-	    if (chip1 == ERR)
-	    {
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	    }
-	    if (chip1 == TMO)
-	    {
-		rc = ERR_TIMOUT;
-		goto outahere;
-	    }
-
-	    printf("ok.\n");
 	}
-	else /* it was protected */
-	{
-	    printf("protected!\n");
-	}
-    }
+	if (prot)
+		return ERR_PROTECTED;
 
-    if (ctrlc())
-      printf("User Interrupt!\n");
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+		printf ("Erasing sector %2d ... ", sect);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked ();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			volatile u16 *addr = (volatile u16 *) (info->start[sect]);
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			*addr = CMD_ERASE_CONFIRM;
+
+			/* wait until flash is ready */
+			chip1 = 0;
+
+			do {
+				result = *addr;
+
+				/* check timeout */
+				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+					chip1 = TMO;
+					break;
+				}
+
+				if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
+					chip1 = READY;
+
+			} while (!chip1);
+
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+			if (chip1 == ERR) {
+				rc = ERR_PROG_ERROR;
+				goto outahere;
+			}
+			if (chip1 == TMO) {
+				rc = ERR_TIMOUT;
+				goto outahere;
+			}
+
+			printf ("ok.\n");
+		} else {			/* it was protected */
+			printf ("protected!\n");
+		}
+	}
+
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
 
 outahere:
-    /* allow flash to settle - wait 10 ms */
-    udelay_masked(10000);
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
 
-    if (iflag)
-      enable_interrupts();
+	if (iflag)
+		enable_interrupts ();
 
-    if (cflag)
-      icache_enable();
+	if (cflag)
+		icache_enable ();
 
-    return rc;
+	return rc;
 }
 
 /*-----------------------------------------------------------------------
  * Copy memory to flash
  */
 
-volatile static int write_word (flash_info_t *info, ulong dest, ulong data)
+volatile static int write_word (flash_info_t * info, ulong dest,
+								ulong data)
 {
-    volatile u16 *addr = (volatile u16 *)dest;
-    ulong result;
-    int rc = ERR_OK;
-    int cflag, iflag;
-    int chip1;
+	volatile u16 *addr = (volatile u16 *) dest;
+	ulong result;
+	int rc = ERR_OK;
+	int cflag, iflag;
+	int chip1;
 
-    /*
-     * Check if Flash is (sufficiently) erased
-     */
-    result = *addr;
-    if ((result & data) != data)
-        return ERR_NOT_ERASED;
-
-
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    cflag = icache_status();
-    icache_disable();
-    iflag = disable_interrupts();
-
-    MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-    MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-    MEM_FLASH_ADDR1 = CMD_PROGRAM;
-    *addr = data;
-
-    /* arm simple, non interrupt dependent timer */
-    reset_timer_masked();
-
-    /* wait until flash is ready */
-    chip1 = 0;
-    do
-    {
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
 	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
 
-	/* check timeout */
-	if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
-	{
-	    chip1 = ERR | TMO;
-	    break;
-	}
-	if (!chip1 && ((result & 0x80) == (data & 0x80)))
-		chip1 = READY;
 
-    }  while (!chip1);
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
 
-    *addr = CMD_READ_ARRAY;
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
+	*addr = data;
 
-    if (chip1 == ERR || *addr != data)
-        rc = ERR_PROG_ERROR;
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
 
-    if (iflag)
-      enable_interrupts();
+	/* wait until flash is ready */
+	chip1 = 0;
+	do {
+		result = *addr;
 
-    if (cflag)
-      icache_enable();
+		/* check timeout */
+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+			chip1 = ERR | TMO;
+			break;
+		}
+		if (!chip1 && ((result & 0x80) == (data & 0x80)))
+			chip1 = READY;
 
-    return rc;
+	} while (!chip1);
+
+	*addr = CMD_READ_ARRAY;
+
+	if (chip1 == ERR || *addr != data)
+		rc = ERR_PROG_ERROR;
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return rc;
 }
 
 /*-----------------------------------------------------------------------
  * Copy memory to flash.
  */
 
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
-    ulong wp, data;
-    int rc;
+	ulong wp, data;
+	int rc;
 
-    if(addr & 1) {
-      printf("unaligned destination not supported\n");
-      return ERR_ALIGN;
-    };
+	if (addr & 1) {
+		printf ("unaligned destination not supported\n");
+		return ERR_ALIGN;
+	};
 
-    if((int)src & 1) {
-      printf("unaligned source not supported\n");
-      return ERR_ALIGN;
-    };
+	if ((int) src & 1) {
+		printf ("unaligned source not supported\n");
+		return ERR_ALIGN;
+	};
 
-    wp = addr;
+	wp = addr;
 
-    while (cnt >= 2) {
-	data = *((volatile u16*)src);
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
+	while (cnt >= 2) {
+		data = *((volatile u16 *) src);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp += 2;
+		cnt -= 2;
 	}
-	src += 2;
-	wp  += 2;
-	cnt -= 2;
-    }
 
-    if(cnt == 1) {
-      data =  (*((volatile u8*)src)) | (*((volatile u8*)(wp+1)) << 8);
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
-	}
-	src += 1;
-	wp  += 1;
-	cnt -= 1;
-    };
+	if (cnt == 1) {
+		data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
+										   8);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 1;
+		wp += 1;
+		cnt -= 1;
+	};
 
-    return ERR_OK;
+	return ERR_OK;
 }

board/atc/atc.c

@@ -203,6 +203,49 @@ const iop_conf_t iop_conf_tab[4][32] = {
     }
 };
 
+/*
+ * UPMB initialization table
+ */
+#define	_NOT_USED_	0xFFFFFFFF
+  
+static const uint rtc_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0xfffec00, 0xfffac00, 0xfff2d00, 0xfef2800, 
+	0xfaf2080, 0xfaf2080, 0xfff2400, 0x1fff6c05, /* last */	    
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0xfffec00, 0xfffac00, 0xfff2d00, 0xfef2800, 
+	0xfaf2080, 0xfaf2080, 0xfaf2400, 0x1fbf6c05, /* last */
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};												
+																	
 /* ------------------------------------------------------------------------- */
 
 /* Check Board Identity:
@@ -319,6 +362,17 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	return (maxsize);
 }
 
+int misc_init_r(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+	
+	upmconfig(UPMA, (uint *)rtc_table, sizeof(rtc_table) / sizeof(uint));
+	memctl->memc_mamr = MxMR_RLFx_6X | MxMR_WLFx_6X | MxMR_OP_NORM;	
+
+	return (0);
+}
+			
 long int initdram (int board_type)
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;

board/atc/config.mk

@@ -30,12 +30,7 @@
 # in RAM where U-Boot is loaded at for debugging.
 #
 
-ifeq ($(CONFIG_BOOT_ROM),y)
-	TEXT_BASE := 0xFF800000
-	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
-else
-	TEXT_BASE := 0xFF000000
-endif
+TEXT_BASE := 0xFF000000
 
 # RAM version
 #TEXT_BASE := 0x100000

board/atc/flash.c

@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      flash_get_info(CFG_MONITOR_BASE));
 #endif
 

board/atc/u-boot.lds

@@ -61,6 +61,7 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/bmw/flash.c

@@ -219,7 +219,7 @@ flash_init(void)
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
     flash_protect(FLAG_PROTECT_SET,
 		CFG_MONITOR_BASE,
-		CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		CFG_MONITOR_BASE + monitor_flash_len - 1,
 		&flash_info[0]);
 #endif
 

board/bmw/u-boot.lds

@@ -70,6 +70,7 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/bubinga405ep/Makefile

@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/bubinga405ep/bubinga405ep.c

@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+long int spd_sdram (void);
+
+#include <common.h>
+#include "bubinga405ep.h"
+#include <asm/processor.h>
+
+
+int board_pre_init (void)
+{
+	mtdcr (uicsr, 0xFFFFFFFF);      /* clear all ints */
+	mtdcr (uicer, 0x00000000);      /* disable all ints */
+	mtdcr (uiccr, 0x00000010);
+	mtdcr (uicpr, 0xFFFF7FF0);      /* set int polarities */
+	mtdcr (uictr, 0x00000010);      /* set int trigger levels */
+	mtdcr (uicsr, 0xFFFFFFFF);      /* clear all ints */
+
+#if 0
+#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
+    /* CS1 */
+	/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
+	mtebc (pb1ap, 0x02815480);
+	mtebc (pb1cr, 0xF0018000);
+
+	p = (unsigned int*)0xEF600708;
+	t = *p;
+	t = t | 0x00000400;
+	*p = t;
+
+	/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
+	mtebc (pb2ap, 0x04815A80);
+	mtebc (pb2cr, 0xF0118000);
+
+	/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
+	mtebc (pb3ap, 0x01815280);
+	mtebc (pb3cr, 0xF0218000);
+
+	/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
+	mtebc (pb7ap, 0x01815280);
+	mtebc (pb7cr, 0xF0318000);
+
+
+	/* set UART1 control to select CTS/RTS */
+#define FPGA_BRDC       0xF0300004
+	*(volatile char *) (FPGA_BRDC) |= 0x1;
+
+#endif
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char *s = getenv ("serial#");
+	unsigned char *e;
+
+	puts ("Board: ");
+
+	if (!s || strncmp (s, "BUBINGA405EP", 9)) {
+		puts ("### No HW ID - assuming WALNUT405");
+	} else {
+		for (e = s; *e; ++e) {
+			if (*e == ' ')
+				break;
+		}
+		for (; s < e; ++s) {
+			putc (*s);
+		}
+	}
+	putc ('\n');
+
+	return (0);
+}
+
+
+/* -------------------------------------------------------------------------
+  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+  the necessary info for SDRAM controller configuration
+   ------------------------------------------------------------------------- */
+long int initdram (int board_type)
+{
+	long int ret;
+
+	ret = spd_sdram ();
+	return ret;
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: xxx MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */

board/bubinga405ep/bubinga405ep.h

@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************
+ * FLASH Memory Map as used by TQ Monitor:
+ *
+ *                          Start Address    Length
+ * +-----------------------+ 0x4000_0000     Start of Flash -----------------
+ * | MON8xx code           | 0x4000_0100     Reset Vector
+ * +-----------------------+ 0x400?_????
+ * | (unused)              |
+ * +-----------------------+ 0x4001_FF00
+ * | Ethernet Addresses    |                 0x78
+ * +-----------------------+ 0x4001_FF78
+ * | (Reserved for MON8xx) |                 0x44
+ * +-----------------------+ 0x4001_FFBC
+ * | Lock Address          |                 0x04
+ * +-----------------------+ 0x4001_FFC0                     ^
+ * | Hardware Information  |                 0x40            | MON8xx
+ * +=======================+ 0x4002_0000 (sector border)    -----------------
+ * | Autostart Header      |                                 | Applications
+ * | ...                   |                                 v
+ *
+ *****************************************************************************/

board/bubinga405ep/config.mk

@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0xFFFE0000
+TEXT_BASE = 0xFFF80000

board/bubinga405ep/flash.c

@@ -0,0 +1,737 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+#ifdef CONFIG_ADCIOP
+#define ADDR0           0x0aa9
+#define ADDR1           0x0556
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_CPCI405
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned short
+#endif
+
+#ifdef CONFIG_WALNUT405
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+#ifdef CONFIG_BUBINGA405EP
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+#endif
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+        uint pbcr;
+        unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1)
+	  {
+	    /* Setup offsets */
+	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	    /* Monitor protection ON by default */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				FLASH_BASE0_PRELIM,
+				FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+				&flash_info[0]);
+	    size_b1 = 0 ;
+	    flash_info[0].size = size_b0;
+	  }
+
+	/* 2 banks */
+	else
+	  {
+	    size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+	    /* Re-do sizing to get full correct info */
+
+	    if (size_b1)
+	      {
+		mtdcr(ebccfga, pb0cr);
+		pbcr = mfdcr(ebccfgd);
+		mtdcr(ebccfga, pb0cr);
+		base_b1 = -size_b1;
+		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+		mtdcr(ebccfgd, pbcr);
+		/*          printf("pb1cr = %x\n", pbcr); */
+	      }
+
+	    if (size_b0)
+	      {
+		mtdcr(ebccfga, pb1cr);
+		pbcr = mfdcr(ebccfgd);
+		mtdcr(ebccfga, pb1cr);
+		base_b0 = base_b1 - size_b0;
+		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+		mtdcr(ebccfgd, pbcr);
+		/*            printf("pb0cr = %x\n", pbcr); */
+	      }
+
+	    size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+
+	    flash_get_offsets (base_b0, &flash_info[0]);
+
+	    /* monitor protection ON by default */
+	    (void)flash_protect(FLAG_PROTECT_SET,
+				base_b0+size_b0-CFG_MONITOR_LEN,
+				base_b0+size_b0-1,
+				&flash_info[0]);
+
+	    if (size_b1) {
+	      /* Re-do sizing to get full correct info */
+	      size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+
+	      flash_get_offsets (base_b1, &flash_info[1]);
+
+	      /* monitor protection ON by default */
+	      (void)flash_protect(FLAG_PROTECT_SET,
+				  base_b1+size_b1-CFG_MONITOR_LEN,
+				  base_b1+size_b1-1,
+				  &flash_info[1]);
+	      /* monitor protection OFF by default (one is enough) */
+	      (void)flash_protect(FLAG_PROTECT_CLEAR,
+				  base_b0+size_b0-CFG_MONITOR_LEN,
+				  base_b0+size_b0-1,
+				  &flash_info[0]);
+	    } else {
+	      flash_info[1].flash_id = FLASH_UNKNOWN;
+	      flash_info[1].sector_count = -1;
+	    }
+
+	    flash_info[0].size = size_b0;
+	    flash_info[1].size = size_b1;
+	  }/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id  == FLASH_AM040)){
+	    for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+        } else {
+	    if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	    } else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	    }
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+        int k;
+        int size;
+        int erased;
+        volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+				break;
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+				break;
+	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+				break;
+	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+                /*
+                 * Check if whole sector is erased
+                 */
+                if (i != (info->sector_count-1))
+                  size = info->start[i+1] - info->start[i];
+                else
+                  size = info->start[0] + info->size - info->start[i];
+                erased = 1;
+                flash = (volatile unsigned long *)info->start[i];
+                size = size >> 2;        /* divide by 4 for longword access */
+                for (k=0; k<size; k++)
+                  {
+                    if (*flash++ != 0xffffffff)
+                      {
+                        erased = 0;
+                        break;
+                      }
+                  }
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+#if 0 /* test-only */
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+#else
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   "
+#endif
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	FLASH_WORD_SIZE value;
+	ulong base = (ulong)addr;
+        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[2];
+#else
+	value = addr2[0];
+#endif
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (FLASH_WORD_SIZE)FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (FLASH_WORD_SIZE)SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[0];			/* device ID		*/
+        /*        printf("\ndev_code=%x\n", value); */
+#else
+	value = addr2[1];			/* device ID		*/
+#endif
+
+	switch (value) {
+	case (FLASH_WORD_SIZE)AMD_ID_F040B:
+	        info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000; /* => 512 ko */
+		break;
+	case (FLASH_WORD_SIZE)AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;				/* => 0.5 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;				/* => 0.5 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+#if 0	/* enable when device IDs are available */
+	case (FLASH_WORD_SIZE)AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+
+	case (FLASH_WORD_SIZE)AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+#endif
+	case (FLASH_WORD_SIZE)SST_ID_xF800A:
+		info->flash_id += FLASH_SST800A;
+		info->sector_count = 16;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (FLASH_WORD_SIZE)SST_ID_xF160A:
+		info->flash_id += FLASH_SST160A;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id  == FLASH_AM040)){
+	    for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+        } else {
+	    if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	    } else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	    }
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+		info->protect[i] = addr2[4] & 1;
+#else
+		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+                  info->protect[i] = 0;
+                else
+                  info->protect[i] = addr2[2] & 1;
+#endif
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+#if 0 /* test-only */
+#ifdef CONFIG_ADCIOP
+		addr2 = (volatile unsigned char *)info->start[0];
+                addr2[ADDR0] = 0xAA;
+                addr2[ADDR1] = 0x55;
+                addr2[ADDR0] = 0xF0;  /* reset bank */
+#else
+		addr2 = (FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+#endif
+#else /* test-only */
+		addr2 = (FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+#endif /* test-only */
+	}
+
+	return (info->size);
+}
+
+int wait_for_DQ7(flash_info_t *info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
+
+	start = get_timer (0);
+    last  = start;
+    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
+        if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+            printf ("Timeout\n");
+            return -1;
+        }
+        /* show that we're waiting */
+        if ((now - last) > 1000) {  /* every second */
+            putc ('.');
+            last = now;
+        }
+    }
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+		    addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
+		    printf("Erasing sector %p\n", addr2);	/* CLH */
+
+		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			for (i=0; i<50; i++)
+				udelay(1000);  /* wait 1 ms */
+		    } else {
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
+			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
+			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+		    }
+		    l_sect = sect;
+		    /*
+		     * Wait for each sector to complete, it's more
+		     * reliable.  According to AMD Spec, you must
+		     * issue all erase commands within a specified
+		     * timeout.  This has been seen to fail, especially
+		     * if printf()s are included (for debug)!!
+		     */
+		    wait_for_DQ7(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+#if 0
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+	wait_for_DQ7(info, l_sect);
+
+DONE:
+#endif
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *) dest) &
+	    (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts ();
+
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts ();
+
+		/* data polling for D7 */
+		start = get_timer (0);
+		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */

board/bubinga405ep/init.S

@@ -0,0 +1,55 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/*       This source code has been made available to you by IBM on an AS-IS */
+/*       basis.  Anyone receiving this source is licensed under IBM */
+/*       copyrights to use it in any way he or she deems fit, including */
+/*       copying it, modifying it, compiling it, and redistributing it either */
+/*       with or without modifications.  No license under IBM patents or */
+/*       patent applications is to be implied by the copyright license. */
+/* */
+/*       Any user of this software should understand that IBM cannot provide */
+/*       technical support for this software and will not be responsible for */
+/*       any consequences resulting from the use of this software. */
+/* */
+/*       Any person who transfers this source code or any derivative work */
+/*       must include the IBM copyright notice, this paragraph, and the */
+/*       preceding two paragraphs in the transferred software. */
+/* */
+/*       COPYRIGHT   I B M   CORPORATION 1995 */
+/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function:     ext_bus_cntlr_init */
+/* Description:  Initializes the External Bus Controller for the external */
+/*		peripherals. IMPORTANT: For pass1 this code must run from */
+/*		cache since you can not reliably change a peripheral banks */
+/*		timing register (pbxap) while running code from that bank. */
+/*		For ex., since we are running from ROM on bank 0, we can NOT */
+/*		execute the code that modifies bank 0 timings from ROM, so */
+/*		we run it from cache. */
+/*	Bank 0 - Flash and SRAM */
+/*	Bank 1 - NVRAM/RTC */
+/*	Bank 2 - Keyboard/Mouse controller */
+/*	Bank 3 - IR controller */
+/*	Bank 4 - not used */
+/*	Bank 5 - not used */
+/*	Bank 6 - not used */
+/*	Bank 7 - FPGA registers */
+/*----------------------------------------------------------------------------- */
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+/*----------------------------------------------------------------------------- */
+/* Function:     sdram_init */
+/* Description:  Dummy implementation here - done in C later */
+/*----------------------------------------------------------------------------- */
+        .globl  sdram_init
+sdram_init:
+        blr

board/bubinga405ep/u-boot.lds

@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/bubinga405ep/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/bubinga405ep/u-boot.lds.debug

@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+/*
+    cpu/ppc4xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+*/
+    cpu/ppc4xx/start.o	(.text)
+    board/bubinga405ep/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+

board/c2mon/flash.c

@@ -91,7 +91,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 
@@ -118,7 +118,7 @@ unsigned long flash_init (void)
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
 			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+			      CFG_MONITOR_BASE+monitor_flash_len-1,
 			      &flash_info[1]);
 #endif
 

board/c2mon/u-boot.lds

@@ -76,6 +76,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/cmi/flash.c

@@ -106,7 +106,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 

board/cmi/u-boot.lds

@@ -68,6 +68,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/cogent/flash.c

@@ -323,7 +323,7 @@ flash_init(void)
 #if CFG_MONITOR_BASE == CFG_FLASH_BASE
 	flash_protect(FLAG_PROTECT_SET,
 		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif
 

board/cpc45/flash.c

@@ -132,12 +132,12 @@ unsigned long flash_init(void)
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
     flash_protect(FLAG_PROTECT_SET,
               CFG_MONITOR_BASE,
-              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+              CFG_MONITOR_BASE + monitor_flash_len - 1,
               &flash_info[1]);
 #else
     flash_protect(FLAG_PROTECT_SET,
               CFG_MONITOR_BASE,
-              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+              CFG_MONITOR_BASE + monitor_flash_len - 1,
               &flash_info[0]);
 #endif
 #endif

board/cpc45/u-boot.lds

@@ -70,6 +70,7 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/cpu86/flash.c

@@ -218,14 +218,14 @@ unsigned long flash_init (void)
 
 		flash_protect  (FLAG_PROTECT_SET,
 				CFG_MONITOR_BASE,
-				CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[1]
+				CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
 		);
 	}
 #else
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
 	flash_protect (FLAG_PROTECT_SET,
 		       CFG_MONITOR_BASE,
-		       CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, &flash_info[0]
+		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
 	);
 #endif
 #endif

board/cpu86/u-boot.lds

@@ -61,6 +61,7 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/cradle/flash.c

@@ -73,7 +73,7 @@ ulong flash_init(void)
     */
    flash_protect(FLAG_PROTECT_SET,
                   CFG_FLASH_BASE,
-                  CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+                  CFG_FLASH_BASE + monitor_flash_len - 1,
                   &flash_info[0]);
 
    flash_protect(FLAG_PROTECT_SET,

board/cradle/u-boot.lds

@@ -31,7 +31,7 @@ SECTIONS
         . = ALIGN(4);
 	.text      :
 	{
-	  cpu/xscale/start.o	(.text)
+	  cpu/pxa/start.o	(.text)
 	  *(.text)
 	}
 

board/cray/L1/Makefile

@@ -25,21 +25,21 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o bootscript.o
+OBJS	= $(BOARD).o flash.o
 SOBJS	= init.o 
 
-$(LIB):	$(OBJS) $(SOBJS)
+# HACK: depend needs bootscript.c, which needs tools/mkimage, which is not
+# built in the depend stage.  So... put bootscript.o here, not in OBJS
+$(LIB):	$(OBJS) $(SOBJS) bootscript.o
 	$(AR) crv $@ $^
 
 clean:
-	rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image
+	rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image bootscript.o
 
 distclean:	clean
 	rm -f $(LIB) core *.bak .depend
 
-$(BOARD).o: $(BOARD).c bootscript.o
-
-bootscript.o: bootscript.c
+$(BOARD).o : $(BOARD).c bootscript.o
 
 bootscript.c: bootscript.image
 	od -t x1 -v -A x $^ | awk -f x2c.awk > $@

board/cray/L1/flash.c

@@ -88,7 +88,7 @@ unsigned long flash_init (void)
 	    /* Monitor protection ON by default */
 	    (void)flash_protect(FLAG_PROTECT_SET,
 				FLASH_BASE0_PRELIM,
-				FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+				FLASH_BASE0_PRELIM+monitor_flash_len-1,
 				&flash_info[0]);
 #endif
 	    size_b1 = 0 ;

board/cray/L1/u-boot.lds

@@ -88,6 +88,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/csb226/flash.c

@@ -74,7 +74,7 @@ ulong flash_init(void)
 	/* Protect monitor and environment sectors */
 	flash_protect(FLAG_PROTECT_SET,
 			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+			CFG_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect(FLAG_PROTECT_SET,

board/csb226/u-boot.lds

@@ -31,7 +31,7 @@ SECTIONS
         . = ALIGN(4);
 	.text      :
 	{
-	  cpu/xscale/start.o	(.text)
+	  cpu/pxa/start.o	(.text)
 	  *(.text)
 	}
 

board/cu824/flash.c

@@ -125,12 +125,12 @@ unsigned long flash_init(void)
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
     flash_protect(FLAG_PROTECT_SET,
               CFG_MONITOR_BASE,
-              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+              CFG_MONITOR_BASE + monitor_flash_len - 1,
               &flash_info[1]);
 #else
     flash_protect(FLAG_PROTECT_SET,
               CFG_MONITOR_BASE,
-              CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+              CFG_MONITOR_BASE + monitor_flash_len - 1,
               &flash_info[0]);
 #endif
 #endif

board/cu824/u-boot.lds

@@ -70,6 +70,7 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/dnp1110/flash.c

@@ -84,7 +84,7 @@ unsigned long flash_init (void)
      */
     flash_protect(FLAG_PROTECT_SET,
 		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+		  CFG_FLASH_BASE + monitor_flash_len  - 1,
 		  &flash_info[0]);
 
     flash_protect(FLAG_PROTECT_SET,

board/ebony/u-boot.lds

@@ -93,6 +93,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/eltec/bab7xx/flash.c

@@ -83,21 +83,21 @@ unsigned long flash_init (void)
     {
         (void)flash_protect(FLAG_PROTECT_SET,
                 FLASH_BASE0_PRELIM,
-                FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+                FLASH_BASE0_PRELIM+monitor_flash_len-1,
                 &flash_info[0]);
     }
     if (size2 == 512*1024)
     {
         (void)flash_protect(FLAG_PROTECT_SET,
                 FLASH_BASE1_PRELIM,
-                FLASH_BASE1_PRELIM+CFG_MONITOR_LEN-1,
+                FLASH_BASE1_PRELIM+monitor_flash_len-1,
                 &flash_info[1]);
     }
     if (size2 == 4*1024*1024)
     {
         (void)flash_protect(FLAG_PROTECT_SET,
                 CFG_FLASH_BASE,
-                CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+                CFG_FLASH_BASE+monitor_flash_len-1,
                 &flash_info[1]);
     }
 

board/eltec/bab7xx/u-boot.lds

@@ -73,6 +73,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/eltec/elppc/flash.c

@@ -83,21 +83,21 @@ unsigned long flash_init (void)
     {
         (void)flash_protect(FLAG_PROTECT_SET,
                 FLASH_BASE0_PRELIM,
-                FLASH_BASE0_PRELIM+CFG_MONITOR_LEN-1,
+                FLASH_BASE0_PRELIM+monitor_flash_len-1,
                 &flash_info[0]);
     }
     if (size2 == 512*1024)
     {
         (void)flash_protect(FLAG_PROTECT_SET,
                 FLASH_BASE1_PRELIM,
-                FLASH_BASE1_PRELIM+CFG_MONITOR_LEN-1,
+                FLASH_BASE1_PRELIM+monitor_flash_len-1,
                 &flash_info[1]);
     }
     if (size2 == 4*1024*1024)
     {
         (void)flash_protect(FLAG_PROTECT_SET,
                 CFG_FLASH_BASE,
-                CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+                CFG_FLASH_BASE+monitor_flash_len-1,
                 &flash_info[1]);
     }
 

board/eltec/elppc/u-boot.lds

@@ -73,6 +73,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/eltec/mhpc/flash.c

@@ -92,7 +92,7 @@ unsigned long flash_init (void)
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
 			    CFG_FLASH_BASE,
-			    CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+			    CFG_FLASH_BASE+monitor_flash_len-1,
 			    &flash_info[0]);
 
 	flash_info[0].size = size_b0;

board/eltec/mhpc/u-boot.lds

@@ -66,6 +66,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/emk/top860/u-boot.lds

@@ -65,6 +65,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/ep7312/flash.c

@@ -61,7 +61,7 @@ ulong flash_init (void)
 	 */
 	flash_protect ( FLAG_PROTECT_SET,
 			CFG_FLASH_BASE,
-			CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+			CFG_FLASH_BASE + monitor_flash_len - 1,
 			&flash_info[0]);
 
 	flash_protect ( FLAG_PROTECT_SET,

board/ep8260/flash.c

@@ -140,7 +140,7 @@ unsigned long flash_init (void)
 #if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
     flash_protect(FLAG_PROTECT_SET,
 		  CFG_MONITOR_BASE,
-		  CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		  CFG_MONITOR_BASE+monitor_flash_len-1,
 		  &flash_info[0]);
 #endif
 

board/ep8260/u-boot.lds

@@ -62,6 +62,7 @@ SECTIONS
     . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/eric/flash.c

@@ -83,13 +83,13 @@ unsigned long flash_init (void)
 	    /* Monitor protection ON by default */
 #if 0	    /* sand: */
 	    (void)flash_protect(FLAG_PROTECT_SET,
-				FLASH_BASE0_PRELIM-CFG_MONITOR_LEN+size_b0,
+				FLASH_BASE0_PRELIM-monitor_flash_len+size_b0,
 				FLASH_BASE0_PRELIM-1+size_b0,
 				&flash_info[0]);
 #else
 	    (void)flash_protect(FLAG_PROTECT_SET,
 		      		CFG_MONITOR_BASE,
-		      		CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      		CFG_MONITOR_BASE+monitor_flash_len-1,
 		      		&flash_info[0]);
 #endif
 	    size_b1 = 0 ;
@@ -132,13 +132,13 @@ unsigned long flash_init (void)
 	    /* monitor protection ON by default */
 #if 0	    /* sand: */
 	    (void)flash_protect(FLAG_PROTECT_SET,
-				FLASH_BASE0_PRELIM-CFG_MONITOR_LEN+size_b0,
+				FLASH_BASE0_PRELIM-monitor_flash_len+size_b0,
 				FLASH_BASE0_PRELIM-1+size_b0,
 				&flash_info[0]);
 #else
 	    (void)flash_protect(FLAG_PROTECT_SET,
 		      		CFG_MONITOR_BASE,
-		      		CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      		CFG_MONITOR_BASE+monitor_flash_len-1,
 		      		&flash_info[0]);
 #endif
 
@@ -150,12 +150,12 @@ unsigned long flash_init (void)
 
 	      /* monitor protection ON by default */
 	      (void)flash_protect(FLAG_PROTECT_SET,
-				  base_b1+size_b1-CFG_MONITOR_LEN,
+				  base_b1+size_b1-monitor_flash_len,
 				  base_b1+size_b1-1,
 				  &flash_info[1]);
 	      /* monitor protection OFF by default (one is enough) */
 	      (void)flash_protect(FLAG_PROTECT_CLEAR,
-				  base_b0+size_b0-CFG_MONITOR_LEN,
+				  base_b0+size_b0-monitor_flash_len,
 				  base_b0+size_b0-1,
 				  &flash_info[0]);
 	    } else {

board/eric/u-boot.lds

@@ -88,6 +88,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/adciop/flash.c

@@ -80,7 +80,7 @@ unsigned long flash_init (void)
 
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      FLASH_BASE0_PRELIM+size_b0-CFG_MONITOR_LEN,
+		      FLASH_BASE0_PRELIM+size_b0-monitor_flash_len,
 		      FLASH_BASE0_PRELIM+size_b0-1,
 		      &flash_info[0]);
 
@@ -93,12 +93,12 @@ unsigned long flash_init (void)
 
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      FLASH_BASE0_PRELIM+size_b0+size_b1-CFG_MONITOR_LEN,
+			      FLASH_BASE0_PRELIM+size_b0+size_b1-monitor_flash_len,
 			      FLASH_BASE0_PRELIM+size_b0+size_b1-1,
 			      &flash_info[1]);
                 /* monitor protection OFF by default (one is enough) */
                 flash_protect(FLAG_PROTECT_CLEAR,
-			      FLASH_BASE0_PRELIM+size_b0-CFG_MONITOR_LEN,
+			      FLASH_BASE0_PRELIM+size_b0-monitor_flash_len,
 			      FLASH_BASE0_PRELIM+size_b0-1,
 			      &flash_info[0]);
 	} else {

board/esd/adciop/u-boot.lds

@@ -74,6 +74,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/ar405/flash.c

@@ -94,7 +94,7 @@ unsigned long flash_init (void)
 
 	/* monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    base_b0+size_b0-CFG_MONITOR_LEN,
+			    base_b0+size_b0-monitor_flash_len,
 			    base_b0+size_b0-1,
 			    &flash_info[0]);
 
@@ -106,12 +106,12 @@ unsigned long flash_init (void)
 
 		/* monitor protection ON by default */
 		(void)flash_protect(FLAG_PROTECT_SET,
-				    base_b1+size_b1-CFG_MONITOR_LEN,
+				    base_b1+size_b1-monitor_flash_len,
 				    base_b1+size_b1-1,
 				    &flash_info[1]);
                 /* monitor protection OFF by default (one is enough) */
                 (void)flash_protect(FLAG_PROTECT_CLEAR,
-                                    base_b0+size_b0-CFG_MONITOR_LEN,
+                                    base_b0+size_b0-monitor_flash_len,
                                     base_b0+size_b0-1,
                                     &flash_info[0]);
 	} else {

board/esd/ar405/u-boot.lds

@@ -96,6 +96,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/ash405/Makefile

@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/esd/ash405/ash405.c

@@ -0,0 +1,252 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <cmd_boot.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
+	volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4);
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+	*duart2_mcr = 0x08;
+	*duart3_mcr = 0x08;
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming ASH405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		puts("NAND:  ");
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif

board/esd/ash405/config.mk

@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ASH405 boards
+#
+
+TEXT_BASE = 0xFFFC0000

board/esd/ash405/flash.c

@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+        uint pbcr;
+        unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+        /* Setup offsets */
+        flash_get_offsets (-size_b0, &flash_info[0]);
+
+        /* Re-do sizing to get full correct info */
+        mtdcr(ebccfga, pb0cr);
+        pbcr = mfdcr(ebccfgd);
+        mtdcr(ebccfga, pb0cr);
+        base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+        mtdcr(ebccfgd, pbcr);
+
+        /* Monitor protection ON by default */
+        (void)flash_protect(FLAG_PROTECT_SET,
+                            -CFG_MONITOR_LEN,
+                            0xffffffff,
+                            &flash_info[0]);
+
+        flash_info[0].size = size_b0;
+
+	return (size_b0);
+}

board/esd/ash405/u-boot.lds

@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/esd/canbt/canbt.c

@@ -114,9 +114,9 @@ int board_pre_init (void)
 	/*
 	 * Setup port pins for normal operation
 	 */
-	out32 (IBM405GP_GPIO0_ODR, 0x00000000);	/* no open drain pins */
-	out32 (IBM405GP_GPIO0_TCR, 0x07038100);	/* setup for output */
-	out32 (IBM405GP_GPIO0_OR, 0x07030100);	/* set output pins to high (default) */
+	out32 (GPIO0_ODR, 0x00000000);	/* no open drain pins */
+	out32 (GPIO0_TCR, 0x07038100);	/* setup for output */
+	out32 (GPIO0_OR, 0x07030100);	/* set output pins to high (default) */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive

board/esd/canbt/flash.c

@@ -74,7 +74,7 @@ unsigned long flash_init (void)
 
         /* Monitor protection ON by default */
         (void)flash_protect(FLAG_PROTECT_SET,
-                            -CFG_MONITOR_LEN,
+                            -monitor_flash_len,
                             0xffffffff,
                             &flash_info[0]);
 

board/esd/canbt/u-boot.lds

@@ -98,6 +98,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/common/fpga.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2003
  * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  *
@@ -36,11 +36,6 @@
 
 #define MAX_ONES               226
 
-#define IBM405GP_GPIO0_OR      0xef600700  /* GPIO Output */
-#define IBM405GP_GPIO0_TCR     0xef600704  /* GPIO Three-State Control */
-#define IBM405GP_GPIO0_ODR     0xef600718  /* GPIO Open Drain */
-#define IBM405GP_GPIO0_IR      0xef60071c  /* GPIO Input */
-
 #ifdef CFG_FPGA_PRG
 # define FPGA_PRG              CFG_FPGA_PRG /* FPGA program pin (ppc output)*/
 # define FPGA_CLK              CFG_FPGA_CLK /* FPGA clk pin (ppc output)    */
@@ -59,7 +54,7 @@
 #define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
 #define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
 
-#define SET_FPGA(data)         out32(IBM405GP_GPIO0_OR, data)
+#define SET_FPGA(data)         out32(GPIO0_OR, data)
 
 #define FPGA_WRITE_1 {                                                    \
         SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
@@ -120,12 +115,12 @@ static int fpga_boot(unsigned char *fpgadata, int size)
   /*
    * Setup port pins for fpga programming
    */
-  out32(IBM405GP_GPIO0_ODR, 0x00000000);                       /* no open drain pins      */
-  out32(IBM405GP_GPIO0_TCR, FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* setup for output        */
-  out32(IBM405GP_GPIO0_OR,  FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set output pins to high */
+  out32(GPIO0_ODR, 0x00000000);                                      /* no open drain pins */
+  out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */
+  out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA);   /* set pins to high */
 
-  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
-  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+  DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
 
   /*
    * Init fpga by asserting and deasserting PROGRAM*
@@ -134,7 +129,7 @@ static int fpga_boot(unsigned char *fpgadata, int size)
 
   /* Wait for FPGA init line low */
   count = 0;
-  while (in32(IBM405GP_GPIO0_IR) & FPGA_INIT)
+  while (in32(GPIO0_IR) & FPGA_INIT)
     {
       udelay(1000); /* wait 1ms */
       /* Check for timeout - 100us max, so use 3ms */
@@ -145,15 +140,15 @@ static int fpga_boot(unsigned char *fpgadata, int size)
         }
     }
 
-  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
-  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+  DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
 
   /* deassert PROGRAM* */
   SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
 
   /* Wait for FPGA end of init period .  */
   count = 0;
-  while (!(in32(IBM405GP_GPIO0_IR) & FPGA_INIT))
+  while (!(in32(GPIO0_IR) & FPGA_INIT))
     {
       udelay(1000); /* wait 1ms */
       /* Check for timeout */
@@ -164,8 +159,8 @@ static int fpga_boot(unsigned char *fpgadata, int size)
         }
     }
 
-  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
-  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+  DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
 
   DBG("write configuration data into fpga\n");
   /* write configuration-data into fpga... */
@@ -237,8 +232,8 @@ static int fpga_boot(unsigned char *fpgadata, int size)
     }
 #endif
 
-  DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
-  DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
+  DBG("%s, ",((in32(GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
+  DBG("%s\n",((in32(GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
 
   /*
    * Check if fpga's DONE signal - correctly booted ?
@@ -246,7 +241,7 @@ static int fpga_boot(unsigned char *fpgadata, int size)
 
   /* Wait for FPGA end of programming period .  */
   count = 0;
-  while (!(in32(IBM405GP_GPIO0_IR) & FPGA_DONE))
+  while (!(in32(GPIO0_IR) & FPGA_DONE))
     {
       udelay(1000); /* wait 1ms */
       /* Check for timeout */

board/esd/cpci405/config.mk

@@ -28,5 +28,9 @@
 ifeq ($(BOARD_REVISION),CPCI4052)
 TEXT_BASE = 0xFFFC0000
 else
+ifeq ($(BOARD_REVISION),CPCI405AB)
+TEXT_BASE = 0xFFFC0000
+else
 TEXT_BASE = 0xFFFD0000
 endif
+endif

board/esd/cpci405/cpci405.c

@@ -37,7 +37,11 @@
 const unsigned char fpgadata[] =
 {
 #ifdef CONFIG_CPCI405_VER2
-# include "fpgadata_cpci4052.c"
+# ifdef CONFIG_CPCI405AB
+#  include "fpgadata_cpci405ab.c"
+# else
+#  include "fpgadata_cpci4052.c"
+# endif
 #else
 # include "fpgadata_cpci405.c"
 #endif
@@ -74,10 +78,10 @@ int board_pre_init (void)
 	/*
 	 * First pull fpga-prg pin low, to disable fpga logic (on version 2 board)
 	 */
-	out32(IBM405GP_GPIO0_ODR, 0x00000000);        /* no open drain pins      */
-	out32(IBM405GP_GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output        */
-	out32(IBM405GP_GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
-	out32(IBM405GP_GPIO0_OR, 0);                  /* pull prg low            */
+	out32(GPIO0_ODR, 0x00000000);        /* no open drain pins      */
+	out32(GPIO0_TCR, CFG_FPGA_PRG);      /* setup for output        */
+	out32(GPIO0_OR,  CFG_FPGA_PRG);      /* set output pins to high */
+	out32(GPIO0_OR, 0);                  /* pull prg low            */
 
 	/*
 	 * Boot onboard FPGA
@@ -192,10 +196,10 @@ int cpci405_version(void)
 	 */
 	cntrl0Reg = mfdcr(cntrl0);
 	mtdcr(cntrl0, cntrl0Reg | 0x03000000);
-	out32(IBM405GP_GPIO0_ODR, in32(IBM405GP_GPIO0_ODR) & ~0x00180000);
-	out32(IBM405GP_GPIO0_TCR, in32(IBM405GP_GPIO0_TCR) & ~0x00180000);
+	out32(GPIO0_ODR, in32(GPIO0_ODR) & ~0x00180000);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) & ~0x00180000);
 	udelay(1000);                   /* wait some time before reading input */
-	value = in32(IBM405GP_GPIO0_IR) & 0x00180000;       /* get config bits */
+	value = in32(GPIO0_IR) & 0x00180000;       /* get config bits */
 
 	/*
 	 * Restore GPIO settings
@@ -505,4 +509,44 @@ void ide_set_reset(int on)
 #endif /* CONFIG_IDE_RESET */
 #endif /* CONFIG_CPCI405_VER2 */
 
+#if 0 /* test-only */
 /* ------------------------------------------------------------------------- */
+
+u8 *dhcp_vendorex_prep (u8 * e)
+{
+	char *ptr;
+
+/* DHCP vendor-class-identifier = 60 */
+	if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
+		*e++ = 60;
+		*e++ = strlen (ptr);
+		while (*ptr)
+			*e++ = *ptr++;
+	}
+/* my DHCP_CLIENT_IDENTIFIER = 61 */
+	if ((ptr = getenv ("dhcp_client_id"))) {
+		*e++ = 61;
+		*e++ = strlen (ptr);
+		while (*ptr)
+			*e++ = *ptr++;
+	}
+
+	return e;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+u8 *dhcp_vendorex_proc (u8 * popt)
+{
+	if (*popt == 61)
+		return (u8 *)-1;
+	if (*popt == 43) {
+		printf("|%s|", popt+4); /* test-only */
+		return (u8 *)-1;
+	}
+	return NULL;
+}
+
+/* ------------------------------------------------------------------------- */
+#endif /* test-only */

board/esd/cpci405/flash.c

@@ -86,11 +86,11 @@ unsigned long flash_init (void)
 	/* Re-do sizing to get full correct info */
 
 	if (size_b1) {
-		base_b1 = -size_b1;
 		if (size_b1 < (1 << 20)) {
 			/* minimum CS size on PPC405GP is 1MB !!! */
 			size_b1 = 1 << 20;
 		}
+		base_b1 = -size_b1;
 		mtdcr (ebccfga, pb0cr);
 		pbcr = mfdcr (ebccfgd);
 		mtdcr (ebccfga, pb0cr);
@@ -103,11 +103,11 @@ unsigned long flash_init (void)
 	}
 
 	if (size_b0) {
-		base_b0 = base_b1 - size_b0;
 		if (size_b0 < (1 << 20)) {
 			/* minimum CS size on PPC405GP is 1MB !!! */
 			size_b0 = 1 << 20;
 		}
+		base_b0 = base_b1 - size_b0;
 		mtdcr (ebccfga, pb1cr);
 		pbcr = mfdcr (ebccfgd);
 		mtdcr (ebccfga, pb1cr);
@@ -125,7 +125,7 @@ unsigned long flash_init (void)
 
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-			base_b0 + size_b0 - CFG_MONITOR_LEN,
+			base_b0 + size_b0 - monitor_flash_len,
 			base_b0 + size_b0 - 1, &flash_info[0]);
 
 	if (size_b1) {
@@ -136,11 +136,11 @@ unsigned long flash_init (void)
 
 		/* monitor protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-				base_b1 + size_b1 - CFG_MONITOR_LEN,
+				base_b1 + size_b1 - monitor_flash_len,
 				base_b1 + size_b1 - 1, &flash_info[1]);
 		/* monitor protection OFF by default (one is enough) */
 		flash_protect (FLAG_PROTECT_CLEAR,
-				base_b0 + size_b0 - CFG_MONITOR_LEN,
+				base_b0 + size_b0 - monitor_flash_len,
 				base_b0 + size_b0 - 1, &flash_info[0]);
 	} else {
 		flash_info[1].flash_id = FLASH_UNKNOWN;

board/esd/cpci405/u-boot.lds

@@ -86,6 +86,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/cpci440/strataflash.c

@@ -200,7 +200,7 @@ unsigned long flash_init (void)
 #if 0 /* test-only */
 	/* Monitor protection ON by default */
 #if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
-	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+CFG_MONITOR_LEN-1; i++)
+	for(i=0; flash_info[0].start[i] < CFG_MONITOR_BASE+monitor_flash_len-1; i++)
 		(void)flash_real_protect(&flash_info[0], i, 1);
 #endif
 #endif

board/esd/cpci440/u-boot.lds

@@ -93,6 +93,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/cpciiser4/flash.c

@@ -74,7 +74,7 @@ unsigned long flash_init (void)
 
         /* Monitor protection ON by default */
         (void)flash_protect(FLAG_PROTECT_SET,
-                            -CFG_MONITOR_LEN,
+                            -monitor_flash_len,
                             0xffffffff,
                             &flash_info[0]);
 

board/esd/cpciiser4/u-boot.lds

@@ -86,6 +86,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/dasa_sim/flash.c

@@ -67,7 +67,7 @@ unsigned long flash_init (void)
 
         /* Monitor protection ON by default */
         (void)flash_protect(FLAG_PROTECT_SET,
-                            -CFG_MONITOR_LEN,
+                            -monitor_flash_len,
                             0xffffffff,
                             &flash_info[0]);
 

board/esd/dasa_sim/u-boot.lds

@@ -100,6 +100,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/du405/flash.c

@@ -94,7 +94,7 @@ unsigned long flash_init (void)
 
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-			base_b0 + size_b0 - CFG_MONITOR_LEN,
+			base_b0 + size_b0 - monitor_flash_len,
 			base_b0 + size_b0 - 1, &flash_info[0]);
 
 	if (size_b1) {
@@ -105,11 +105,11 @@ unsigned long flash_init (void)
 
 		/* monitor protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-				base_b1 + size_b1 - CFG_MONITOR_LEN,
+				base_b1 + size_b1 - monitor_flash_len,
 				base_b1 + size_b1 - 1, &flash_info[1]);
 		/* monitor protection OFF by default (one is enough) */
 		flash_protect (FLAG_PROTECT_CLEAR,
-				base_b0 + size_b0 - CFG_MONITOR_LEN,
+				base_b0 + size_b0 - monitor_flash_len,
 				base_b0 + size_b0 - 1, &flash_info[0]);
 	} else {
 		flash_info[1].flash_id = FLASH_UNKNOWN;

board/esd/du405/u-boot.lds

@@ -86,6 +86,7 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/esd/ocrtc/flash.c

@@ -127,7 +127,7 @@ unsigned long flash_init (void)
 
 	/* monitor protection ON by default */
 	flash_protect (FLAG_PROTECT_SET,
-			base_b0 + size_b0 - CFG_MONITOR_LEN,
+			base_b0 + size_b0 - monitor_flash_len,
 			base_b0 + size_b0 - 1, &flash_info[0]);
 
 	if (size_b1) {
@@ -138,11 +138,11 @@ unsigned long flash_init (void)
 
 		/* monitor protection ON by default */
 		flash_protect (FLAG_PROTECT_SET,
-				base_b1 + size_b1 - CFG_MONITOR_LEN,
+				base_b1 + size_b1 - monitor_flash_len,
 				base_b1 + size_b1 - 1, &flash_info[1]);
 		/* monitor protection OFF by default (one is enough) */
 		flash_protect (FLAG_PROTECT_CLEAR,
-				base_b0 + size_b0 - CFG_MONITOR_LEN,
+				base_b0 + size_b0 - monitor_flash_len,
 				base_b0 + size_b0 - 1, &flash_info[0]);
 	} else {
 		flash_info[1].flash_id = FLASH_UNKNOWN;