* Modify KUP4X board configuration to use SL811 driver for USB memory

sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X

CHANGELOG

@@ -1,7 +1,553 @@
 ======================================================================
-Changes for U-Boot 1.0.2:
+Changes for U-Boot 1.1.1:
 ======================================================================
 
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+  sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+  Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+  cleanup support for CF/IDE on PCMCIA for PXA25X
+
+* Temporarily disabled John Kerl's extended MII command code because
+  "miivals.h" is missing
+
+* Patches by Mark Jonas, 13 Apr 2004:
+  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
+  - Add sync instructions to IceCube SDRAM init code
+  - Move SDRAM chip constants into seperate include files
+  - Unify DDR and SDR initialization code
+  - Unify all IceCube (Lite5xxx) target names
+
+* Patch by John Kerl, 16 Apr 2004:
+  Enable ranges in mii command, e.g. mii read 0-1f 0 or
+  mii read 4-7 18-1a.  Also add mii dump subcommand for
+  pretty-printing standard regs 0-5.
+
+* Patch by  Stephen Williams, 16 April 2004:
+  fix typo in JSE.h; update MAINTAINERS
+
+* Patch by Matthew S. McClintock, 14 Apr 2004:
+  fix initdram function for utx8245 board
+
+* Patch by Markus Pietrek, 14 Apr 2004:
+  use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
+
+* Patch by Reinhard Meyer, 18 Apr 2004:
+  provide the IDE Reset Function for EMK 5200 boards
+
+* Patch by Masami Komiya, 12 Apr 2004:
+  fix pci_hose_write_config_{byte,word}_via_dword problems
+
+* Patch by Sangmoon Kim, 12 Apr 2004:
+  Update max RAM size for debris board
+
+* Patch by Travis Sawyer, 08 Apr 2004:
+  Add TLB entry for second DIMM slot on ocotea
+
+* Patch by Masami Komiya, 08 Apr 2004:
+  add RTL8169 network driver
+
+* Patch by Dan Malek, 07 Apr 2004:
+  - Add support for RPC/STx GP3, Motorola 8560 board
+  - Update 85xx TSEC driver so it searches MII for first available PHY
+    and uses that one.
+  - Add functions to support console MII commands.
+
+* Patch by Tolunay Orkun, 07 Apr 2004:
+  Move initialization of bi_iic_fast[]
+  from board_init_f() to board_init_r()
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+  Cleanup microblaze port
+
+* Patch by Sangmoon Kim, 07 Apr 2004:
+  Add auto SDRAM module detection for Debris board
+
+* Patch by Rune Torgersen, 06 Apr 2004:
+  - Fix some PCI problems on the MPC8266ADS board
+  - Fix the location of some PCI entries in the immap structure
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+  - add support for microblaze processors
+  - add support for AtmarkTechno "suzaku" board
+
+* Configure PPChameleon board to use redundand environment in flash
+
+* Configure PPChameleon board to use JFFS2 NAND support.
+
+* Added support for JFFS2 filesystem (read-only) on top of NAND flash
+
+* Patch by Rune Torgersen, 16 Apr 2004:
+  LBA48 fixes
+
+* Patches by Pantelis Antoniou, 16 Apr 2004:
+  - add support for a new version of an Intracom board and fix
+    various other things on others.
+  - add verify support to the crc32 command (define
+    CONFIG_CRC32_VERIFY to enable it)
+  - fix FEC driver for MPC8xx systems:
+    1. fix compilation problems for boards that use dynamic
+       allocation of DPRAM
+    2. shut down FEC after network transfers
+  - HUSH parser fixes:
+    1. A new test command was added. This is a simplified version of
+       the one in the bourne shell.
+    2. A new exit command was added which terminates the current
+       executing script.
+    3. Fixed handing of $? (exit code of last executed command)
+  - Fix some compile problems;
+    add "once" functionality for the netretry variable
+
+* Patch by George G. Davis, 02 Apr 2004:
+  add support for Intel Assabet board
+
+* Patch by Stephen Williams, 01 Apr 2004:
+  Add support for Picture Elements JSE board
+
+* Patch by Christian Pell, 01 Apr 2004:
+  Add CompactFlash support for PXA systems.
+
+* Patches by Pantelis Antoniou, 30 Mar 2004:
+  - add auto-complete support to the U-Boot CLI
+  - add support for NETTA and NETPHONE boards; fix NETVIA board
+  - add support for the Epson 156x series of graphical displays
+    (These displays are serial and not suitable for using a normal
+    framebuffer console on them)
+  - add infrastructure needed in order to POST any DSPs in a board
+  - improve and fix various things in the MPC8xx FEC driver:
+    1. The new 87x and 88x series of processors have two FECs,
+       and the new driver supports them both.
+    2. Another change in the 87x/88x series is support for
+       the RMII (Reduced MII) interface. However numerous
+       changes are needed to make it work since the PHYs
+       are connected to the same lines. That means that
+       you have to address them correctly over the MII
+       interface.
+    3. We now correctly match the MII/RMII interface
+       configuration to what the PHY reports.
+  - Fix problem when readingthe MII status register. Due to the
+    internal design of many PHYs you have to read the register
+    twice. The problem is more apparent in 10Mbit mode.
+  - add new mode ".jffs2s" for reading from a NAND device: it just
+    skips over bad blocks.
+  - add networking support for VLANs (802.1q), and CDP (Cisco
+    Discovery Protocol)
+  - some minor patches / cleanup
+
+* Patch by Yuli Barcohen, 28 Mar 2004:
+  - Add support for MPC8272 family including MPC8247/8248/8271/8272
+  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
+  - Change configuration method for MPC8260ADS family
+
+* add startup code to clear the BSS of standalone applications
+
+* Fix if / elif handling bug in HUSH shell
+
+======================================================================
+Changes for U-Boot 1.1.0:
+======================================================================
+
+* Patch by Mark Jonas: Remove config.tmp files only when
+  unconfiguring the board
+
+* Adapt RMU board for bigger flash memory
+
+* Patch by Klaus Heydeck, 13 Mar 2003:
+  Add support for KUP4X Board
+
+* Patch by Pavel Bartusek, 21 Mar 2004
+  Add Reiserfs support
+
+* Patch by Hinko Kocevar, 20 Mar 2004
+  - Add auto-release for SMSC LAN91c111 driver
+  - Add save/restore of PTR and PNR regs as suggested in datasheet
+
+* Patch by Stephen Williams, 19 March 2004
+  Increase speed of sector reads from SystemACE,
+  shorten poll timeout and remove a useless reset
+
+* Patch by Tolunay Orkun, 19 Mar 2004:
+  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
+  (CONFIG_PHY_GIGE)
+
+* Patch by Brad Kemp, 18 Mar 2004:
+  prevent machine checks during a PCI scan
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  Fix string cleaning in IDE identification
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  - Unify video mode handling for Chips & Technologies 69000 Video
+    chip and Silicon Motion SMI 712/710/810 Video chip
+  - Add selection of the video output (CRT or LCD) via 'videoout'
+    environment variable for the Silicon Motion
+  - README update
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  include/common.h typo fix
+
+* Patches by Tolunay Orkun, 17 Mar 2004:
+  - Add support for bd->bi_iic_fast[] initialization via environment
+    variable "i2cfast" (CONFIG_I2CFAST)
+  - Add "i2cfast" u-boot environment variable support for csb272
+
+* Patch by Carl Riechers, 17 Mar 2004:
+  Ignore '\0' characters in console input for use with telnet and
+  telco pads.
+
+* Patch by Leon Kukovec, 17 Mar 2004:
+  typo fix for strswab prototype #ifdef
+
+* Patches by Thomas Viehweger, 16 Mar 2004:
+  - show PCI clock frequency on MPC8260 systems
+  - add FCC_PSMR_RMII flag for HiP7 processors
+  - in do_jffs2_fsload(), take load address from load_addr if not set
+    explicit, update load_addr otherwise
+  - replaced printf by putc/puts when no formatting is needed
+    (smaller code size, faster execution)
+
+* Patch by Phillippe Robin, 16 Mar 2004:
+  avoid dereferencing NULL pointer in lib_arm/armlinux.c
+
+* Patch by Stephen Williams, 15 Mar 2004:
+  Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
+
+* Patch by Tolunay Orkun, 15 Mar 2004:
+  Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
+
+* Patch by Travis Sawyer, 15 Mar 2004:
+  Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
+
+* Add start-up delay to make sure power has stabilized before
+  attempting to switch on USB on SX1 board.
+
+* Patch by Josef Wagner, 18 Mar 2004:
+  - Add support for MicroSys XM250 board (PXA255)
+  - Add support for MicroSys PM828 board (MPC8280)
+  - Add support for 32 MB Flash on PM825/826
+  - new SDRAM refresh rate for PM825/PM826
+  - added support for MicroSys PM520 (MPC5200)
+  - replaced Query by Identify command in CPU86/flash.c
+    to support 28F160F3B
+
+* Fix wrap around problem with udelay() on ARM920T
+
+* Add support for Macronix flash on TRAB board
+
+* Patch by Pierre Aubert, 15 Mar 2004:
+  Fix buffer overflow in IDE identification
+
+* Fix power-off of LCD for out-of-band temperatures on LWMON board
+
+* Remove redundand #define in IceCube.h
+
+* Patch by Steven Scholz, 27 Feb 2004:
+  - Adding get_ticks() and get_tbclk() for AT91RM9200
+  - Many white space fixes in cpu/at91rm9200/interrupts.c
+
+* Patches by Steven Scholz, 20 Feb 2004:
+  some cleanup in AT91RM9200 related code
+
+* Patches by Travis Sawyer, 12 Mar 2004:
+  - Fix Gigabit Ethernet support for 440GX
+  - Add Gigabit Ethernet Support to MII PHY utilities
+
+* Patch by Brad Kemp, 12 Mar 2004:
+  Fixes for drivers/cfi_flash.c:
+  - Better support for x8/x16 implementations
+  - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
+  - Added defines for AMD command and address constants
+
+* Patch by Leon Kukovec, 12 Mar 2004:
+  Fix get_dentfromdir() to correctly handle deleted dentries
+
+* Patch by George G. Davis, 11 Mar 2004:
+  Remove hard coded network settings in TI OMAP1610 H2
+  default board config
+
+* Patch by George G. Davis, 11 Mar 2004:
+  add support for ADS GraphicsClient+ board.
+
+* Patch by Pierre Aubert, 11 Mar 2004:
+  - add bitmap command and splash screen support in cfb console
+  - add [optional] origin in the bitmap display command
+
+* Patch by Travis Sawyer, 11 Mar 2004:
+  Fix ocotea board early init interrupt setup.
+
+* Patch by Thomas Viehweger, 11 Mar 2004:
+  Remove redundand code; add  PCI-specific bits to include/mpc8260.h
+
+* Patch by Stephan Linz, 09 Mar 2004
+  - Add support for the SSV ADNP/ESC1 (Nios Softcore)
+
+* Patch by George G. Davis, 9 Mar 2004:
+  fix recent build failure for SA1100 target
+
+* Patch by Travis Sawyer, 09 Mar 2004:
+  Support native interrupt mode for the IBM440GX.
+  Previously it was running in 440GP compatibility mode.
+
+* Patch by Philippe Robin, 09 Mar 2004:
+  Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
+  Platform support.
+
+* Patch by Masami Komiya, 08 Mar 2004:
+  Don't overwrite server IP address or boot file name
+  when the boot server does not return values
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+  Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+  Fix early board initialization for Cogent CSB272 board
+
+* Patch by Ed Okerson, 3 Mar 2004:
+  fix CFI flash writes for little endian systems
+
+* Patch by Reinhard Meyer, 01 Mar 2004:
+  generalize USB and IDE support for MPC5200 with according
+  changes to IceCube.h and TOP5200.h
+  add Am29LV256 256 MBit FLASH support for TOP5200 boards
+  add info about USB and IDE to README
+
+* Patch by Yuli Barcohen, 4 Mar 2004:
+  Fix problems with GCC 3.3.x which changed handling of global
+  variables explicitly initialized to zero (now in .bss instead of
+  .data as before).
+
+* Patch by Leon Kukovec, 02 Mar 2004:
+  add strswab() to fix IDE LBA capacity, firmware and model numbers
+  on little endian machines
+
+* Patch by Masami Komiya, 02 Mar 2004:
+  - Remove get_ticks() from NFS code
+  - Add verification of RPC transaction ID
+
+* Patch by Pierre Aubert, 02 Mar 2004:
+  cleanup for IDE and USB drivers for MPC5200
+
+* Patch by Travis Sawyer, 01 Mar 2004:
+  Ocotea:
+  - Add IBM PPC440GX Ref Platform support (Ocotea)
+    Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
+    Adapted to U-Boot and 440GX port
+  440gx_enet.c:
+  - Add gracious handling of all Ethernet Pin Selections for 440GX
+  - Add RGMII selection for Cicada CIS8201 Gigabit PHY
+  ppc440.h:
+  - Add needed bit definitions
+  - Fix formatting
+
+* Patch by Carl Riechers, 1 Mar 2004:
+  Add PPC440GX prbdv0 divider to fix memory clock calculation.
+
+* Patch by Stephan Linz, 27 Feb 2004
+  - avoid problems for targets without NFS download support
+
+* Patch by Rune Torgersen, 27 Feb 2004:
+  - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
+  - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
+  - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
+
+* Patch by Masami Komiya, 27 Feb 2004:
+  Fix rarpboot: add autoload by NFS
+
+* Patch by Dan Eisenhut, 26 Feb 2004:
+  fix flash_write return value in saveenv
+
+* Patch by Stephan Linz, 11 Dec 2003
+  expand config.mk to avoid trigraph warnings on NIOS
+
+* Rename "BMS2003" board into "HMI10"
+
+* SX1 patches: use "serial#" for USB serial #; use redundand environment
+  storage; auto-set console on USB port (using preboot command)
+
+* Add support for SX1 mobile phone; add support for USB-based console
+  (enable with "setenv stdout usbtty; setenv stdin usbtty")
+
+* Fix LOWBOOT configuration for MPC5200 with DDR memory
+
+* Fix SDRAM timings for LITE5200 / IceCube board
+
+* Handle Auti-MDIX / connection status for INCA-IP
+
+* Fix USB problems when attempting to read 0 bytes
+
+* Patch by Travis Sawyer, 26 Feb 2004:
+  Fix broken compile for XPEDITE1K target.
+
+* Patch by Stephan Linz, 26 Feb 2004:
+  Bug fix for NFS code on NIOS targets
+
+* Patch by Stephen Williams, 26 Feb 2004:
+  Break up SystemACE reads of large block counts
+
+* Patch by Pierre Aubert, 26 Feb 2004
+  add IDE support for MPC5200
+
+* Patch by Masami Komiya, 26 Feb 2004:
+  add autoload via NFS
+
+* Patch by Stephen Williams
+  Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
+  elsewhere in the source.
+
+* Patch by Steven Scholz, 25 Feb 2004:
+  - Timeouts in FPGA code should be based on CFG_HZ
+  - Minor cleanup in code for Altera FPGA ACEX1K
+
+* Patch by Steven Scholz, 25 Feb 2004:
+  Changed "Directory Hierarchy" section in README
+
+* Patch by Masami Komiya, 25 Feb 2004:
+  Reduce copy count in nfs_read_reply() of NFS code
+
+* Patch by Markus Pietrek, 24 Feb 2004:
+  NS9750 DevBoard added
+
+* Patch by Pierre Aubert, 24 Feb 2004
+  add USB support for MPC5200
+
+* Patch by Steven Scholz, 24 Feb 2004:
+  - fix MII commands to use values from last command
+
+* Patch by Torsten Demke, 24 Feb 2004:
+  Add support for the eXalion platform (SPSW-8240, F-30, F-300)
+
+* Patch by Rahul Shanbhag, 19 Feb 2004:
+  Fixes for for OMAP1610 board:
+  - shift some IRQ specific code to platform.S file
+  - remove duplicatewatchdog reset code from start.S
+
+* Make Auto-MDIX Support configurable on INCA-IP board
+
+* Fix license for mkimage tool
+
+* Patch by Masami Komiya, 24 Feb 2004:
+  Update NetBootFileXferSize in NFS code
+
+* Patch by Scott McNutt, 24 Feb 2004:
+  fix packet length in NFS code
+
+* Patch by Masami Komiy, 22 Feb 2004:
+  Add support for NFS for file download
+
+* Patch by Andrea Scian, 17 Feb 2004:
+  Add support for S3C44B0 processor and DAVE B2 board
+
+* Patch by Steven Scholz, 20 Feb 2004:
+  - Add support for MII commands on AT91RM9200 boards
+  - some cleanup in AT91RM9200 ethernet code
+
+* Patch by Peter Ryser, 20 Feb 2004:
+  Add support for the Xilinx ML300 platform
+
+* Patch by Stephan Linz, 17 Feb 2004:
+  Fix watchdog support for NIOS
+
+* Patch by Josh Fryman, 16 Feb 2004:
+  Fix byte-swapping for cfi_flash.c for different bus widths
+
+* Patch by Jon Diekema, 14 Jeb 2004:
+  Remove duplicate "FPGA Support" notes from the README file
+
+* Patches by Reinhard Meyer, 14 Feb 2004:
+  - update board/emk tree; use common flash driver
+  - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
+    [adapted for other PPC CPUs -- wd]
+  - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
+
+* Patch by Jon Diekema, 13 Feb 2004:
+  Call show_boot_progress() whenever POST "FAILED" is printed.
+
+* Patch by Nishant Kamat, 13 Feb 2004:
+  Add support for TI OMAP1610 H2 Board
+  Fixes for cpu/arm926ejs/interrupt.c
+	(based on Richard Woodruff's patch for arm925, 16 Oct 03)
+  Fix for a timer bug in OMAP1610 Innovator
+  Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
+
+* Patches by Stephan Linz, 12 Feb 2004:
+  - add support for NIOS timer with variable period preload counter value
+  - prepare POST framework support for NIOS targets
+
+* Patch by Denis Peter, 11 Feb 2004:
+  add POST support for the MIP405 board
+
+* Patch by Laurent Mohin, 10 Feb 2004:
+  Fix buffer overflow in common/usb.c
+
+* Patch by Tolunay Orkun, 10 Feb 2004:
+  Add support for Cogent CSB272 board
+
+* Patch by Thomas Elste, 10 Feb 2004:
+  Add support for NET+50 CPU and ModNET50 board
+
+* Patch by Sam Song, 10 Feb 2004:
+  Fix typos in cfi_flash.c
+
+* Patch by Leon Kukovec, 10 Feb 2004
+  Fixed long dir entry slot id calculation in get_vfatname
+
+* Patch by Robin Gilks, 10 Feb 2004:
+  add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
+  !=, <>, <, >, <=, >=)
+
+* Fix problem with side effects in macros in include/usb.h
+
+* Patch by David Benson, 13 Nov 2003:
+  bug 841358 - fix TFTP download size limit
+
+* Fixing bug 850768:
+  improper flush_cache() in load_serial()
+
+* Fixing bug 834943:
+  MPC8540 - missing volatile declarations
+
+* Patch by Stephen Williams, 09 Feb 2004:
+  Add support for Xilinx SystemACE chip:
+  - New files common/cmd_ace.c and include/systemace.h
+  - Hook systemace support into cmd_fat and the partition manager
+
+* Patch by Travis Sawyer, 09 Feb 2004:
+  Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
+
+* Patch by Travis Sawyer, 09 Feb 2004:
+  o 440GX:
+    - Fix PCI Indirect access for type 1 config cycles with ppc440.
+    - Add phymode for 440 enet
+    - fix pci pre init
+  o XPedite1K:
+    - Change board_pre_init to board_early_init_f
+    - Add user flash to bus controller setup
+    - Fix pci pre init
+    - Fix is_pci_host to check GPIO for monarch bit
+    - Force xpedite1k to pci conventional mode (via #define option)
+
+* Patch by Brad Kemp, 4 Feb 2004:
+  - handle the machine check that is generated during the PCI scans
+    on 82xx processors.
+  - define the registers used in the IMMR by the PCI subsystem.
+
+* Patch by Pierre Aubert, 03 Feb 2004:
+  cpu/mpc5xxx/start.S: copy MBAR into SPR311
+
+* Patch by Jeff Angielski, 03 Feb 2004:
+  Fix copy & paste error in cpu/mpc8260/pci.c
+
+* Patch by Reinhard Meyer, 24 Jan 2004:
+  Fix typo in cpu/mpc5xxx/pci_mpc5200.c
+
 * Add Auto-MDIX support for INCA-IP
 
 * Some code cleanup

CREDITS

@@ -28,16 +28,27 @@ D: ERIC Support
 
 N: Pantelis Antoniou
 E: panto@intracom.gr
-D: NETVIA board support, ARTOS support.
+D: NETVIA & NETPHONE board support, ARTOS support.
 
 N: Pierre Aubert
 E: <p.aubert@staubli.com>
 D: Support for RPXClassic board
 
+N: Yuli Barcohen
+E: yuli@arabellasw.com
+D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
+D: Support for Zephyr Engineering ZPC.1900 board.
+W: http://www.arabellasw.com
+
 N: Jerry van Baren
 E: <vanbaren@cideas.com>
 D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test.
 
+N: Pavel Bartusek
+E: <pba@sysgo.com>
+D: Reiserfs support
+W: http://www.elinos.com
+
 N: Andre Beaudin
 E: <andre.beaudin@colubris.com>
 D: PCMCIA, Ethernet, TFTP
@@ -78,6 +89,10 @@ N: Magnus Damm
 E: damm@opensource.se
 D: 8xxrom
 
+N: George G. Davis
+E: gdavis@mvista.com
+D: Board ports for ADS GraphicsClient+ and Intel Assabet
+
 N: Arun Dharankar
 E: ADharankar@ATTBI.Com
 D: threads / scheduler example code
@@ -103,6 +118,11 @@ N: Dave Ellis
 E: DGE@sixnetio.com
 D: EEPROM Speedup, SXNI855T port
 
+N: Thomas Elste
+E: info@elste.org
+D: Port for the ModNET50 Board, NET+50 CPU Port
+W: http://www.imms.de
+
 N: Daniel Engström
 E: daniel@omicron.se
 D: x86 port, Support for sc520_cdp board
@@ -211,6 +231,7 @@ W: http://www.leox.org
 N: Stephan Linz
 E: linz@li-pro.net
 D: Support for Nios Stratix Development Kit (DK-1S10)
+D: Support for SSV ADNP/ESC1 (Nios Cyclone)
 W: http://www.li-pro.net
 
 N: Raymond Lo
@@ -246,6 +267,10 @@ E: rof@sysgo.de
 D: Initial support for SSV-DNP1110, SMC91111 driver
 W: www.elinos.com
 
+N: Tolunay Orkun
+E: torkun@nextio.com
+D: Support for Cogent CSB272 board
+
 N: Keith Outwater
 E: keith_outwater@mvis.com
 D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC)
@@ -278,7 +303,7 @@ D: Author of LiMon-1.4.2, which contributed some ideas
 
 N: Travis B. Sawyer
 E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.
+D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.  IBM 440gx Ref Platform (Ocotea)
 
 N: Paolo Scaffardi
 E: arsenio@tin.it

MAINTAINERS

@@ -27,6 +27,7 @@ Pantelis Antoniou <panto@intracom.gr>
 
 Yuli Barcohen <yuli@arabellasw.com>
 
+	MPC8260ADS		MPC826x/MPC827x/MPC8280
 	ZPC1900			MPC8265
 
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
@@ -49,6 +50,10 @@ K
 
 	FLAGADM			MPC823
 
+Torsten Demke <torsten.demke@fci.com>
+
+	eXalion			MPC824x
+
 Wolfgang Denk <wd@denx.de>
 
 	AMX860			MPC860
@@ -142,6 +147,7 @@ Bill Hargen <Bill_Hargen@Jabil.com>
 Klaus Heydeck <heydeck@kieback-peter.de>
 
 	KUP4K			MPC855
+	KUP4X			MPC859
 
 Murray Jensen <Murray.Jensen@cmst.csiro.au>
 
@@ -187,6 +193,9 @@ Scott McNutt <smcnutt@artesyncp.com>
 
 	EBONY			PPC440GP
 
+Tolunay Orkun <torkun@nextio.com>
+	csb272			PPC4xx
+
 Keith Outwater <Keith_Outwater@mvis.com>
 
 	GEN860T			MPC860T
@@ -223,6 +232,11 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 	PMC405			PPC405GP
 	VOH405			PPC405EP
 
+Travis Sawyer (travis.sawyer@sandburst.com>
+
+	XPEDITE1K		PPC440GX
+	OCOTEA			PPC440GX
+
 Peter De Schrijver <p2@mind.be>
 
 	ML2			PPC4xx
@@ -241,6 +255,10 @@ Rune Torgersen <runet@innovsys.com>
 
 	MPC8266ADS		MPC8266
 
+Stephen Williams <steve@icarus.com>
+
+	JSE			PPC405GPr
+
 John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
@@ -250,6 +268,10 @@ Xianghua Xiao <x.xiao@motorola.com>
 	MPC8540ADS		MPC8540
 	MPC8560ADS		MPC8560
 
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -272,7 +294,6 @@ Unknown / orphaned boards:
 
 	MOUSSE			MPC824x
 
-	MPC8260ADS		MPC8260
 	RPXsuper		MPC8260
 	rsdproto		MPC8260
 
@@ -286,6 +307,15 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+George G. Davis <gdavis@mvista.com>
+
+	assabet			SA1100
+	gcplus			SA1100
+
+Thomas Elste <info@elste.org>
+
+	modnet50		ARM720T (NET+50)
+
 Peter Figuli <peposh@etc.sk>
 
 	wepep250		xscale
@@ -307,9 +337,14 @@ Gary Jennejohn <gj@denx.de>
 	trab			ARM920T
 
 Kshitij Gupta <kshitij@ti.com>
+
 	omap1510inn		ARM925T
 	omap1610inn		ARM926EJS
 
+Nishant Kamat <nskamat@ti.com>
+
+	omap1610h2		ARM926EJS
+
 David Müller <d.mueller@elsoft.ch>
 
 	smdk2410		ARM920T
@@ -365,6 +400,7 @@ Thomas Lange <thomas@corelatus.se>
 Stephan Linz <linz@li-pro.net>
 
 	DK1S10			Nios-32
+	ADNPESC1		Nios-32
 
 Scott McNutt <smcnutt@psyent.com>
 

MAKEALL

@@ -25,7 +25,7 @@ LIST_5xx="	\
 #########################################################################
 
 LIST_5xxx="	\
-	IceCube_5100	IceCube_5200	EVAL5200	\
+	icecube_5100	icecube_5200	EVAL5200	PM520		\
 "
 
 #########################################################################
@@ -40,15 +40,15 @@ LIST_8xx="	\
 	GEN860T_SC	GENIETV		GTH		hermes		\
 	IAD210		ICU862_100MHz	IP860		IVML24		\
 	IVML24_128	IVML24_256	IVMS8		IVMS8_128	\
-	IVMS8_256	KUP4K           LANTEC	        lwmon   	\
-	MBX		MBX860T		MHPC		MPC86xADS	\
-	MVS1		NETVIA		NETVIA_V2	NX823		\
-	pcu_e		QS823		QS850		QS860T		\
-	R360MPI		RBC823		rmu		RPXClassic	\
-	RPXlite		RRvision	SM850		SPD823TS	\
-	svm_sc8xx	SXNI855T	TOP860		TQM823L		\
-	TQM823L_LCD	TQM850L		TQM855L		TQM860L		\
-	v37								\
+	IVMS8_256	KUP4K		KUP4X		LANTEC		\
+	lwmon		MBX		MBX860T		MHPC		\
+	MPC86xADS	MVS1		NETVIA		NETVIA_V2	\
+	NX823		pcu_e		QS823		QS850		\
+	QS860T		R360MPI		RBC823		rmu		\
+	RPXClassic	RPXlite		RRvision	SM850		\
+	SPD823TS	svm_sc8xx	SXNI855T	TOP860		\
+	TQM823L		TQM823L_LCD	TQM850L		TQM855L		\
+	TQM860L		v37		NETTA		NETPHONE	\
 "
 
 #########################################################################
@@ -56,14 +56,15 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405          BUBINGA405EP    \
-	CANBT		CPCI405		CPCI4052 	CPCI405AB       \
-	CPCI440         CPCIISER4	CRAYL1  	DASA_SIM	\
-	DP405           DU405    	EBONY           ERIC  		\
-	EXBITGEN	HUB405          MIP405  	MIP405T		\
-	ML2		OCRTC		ORSG		PCI405		\
-	PIP405		PLU405          PMC405          PPChameleonEVB	\
-	VOH405          W7OLMC		W7OLMG          WALNUT405	\
+	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	CANBT		CPCI405		CPCI4052	CPCI405AB	\
+	CPCI440		CPCIISER4	CRAYL1		csb272		\
+	DASA_SIM	DP405		DU405		EBONY		\
+	ERIC		EXBITGEN	HUB405		JSE		\
+	MIP405		MIP405T		ML2		ml300		\
+	OCOTEA		OCRTC		ORSG		PCI405		\
+	PIP405		PLU405		PMC405		PPChameleonEVB	\
+	VOH405		W7OLMC		W7OLMG		WALNUT405	\
 	XPEDITE1K							\
 "
 
@@ -72,10 +73,10 @@ LIST_4xx="	\
 #########################################################################
 
 LIST_824x="	\
-	A3000           BMW		CPC45		CU824		\
-	debris		MOUSSE          MUSENKI    	MVBLUE		\
-	OXC		PN62		Sandpoint8240   Sandpoint8245	\
-	SL8245		utx8245						\
+	A3000		BMW		CPC45		CU824		\
+	debris		eXalion		MOUSSE		MUSENKI		\
+	MVBLUE		OXC		PN62		Sandpoint8240	\
+	Sandpoint8245	SL8245		utx8245				\
 "
 
 #########################################################################
@@ -85,9 +86,10 @@ LIST_824x="	\
 LIST_8260="	\
 	atc		cogent_mpc8260	CPU86		ep8260		\
 	gw8260		hymod		IPHASE4539	MPC8260ADS	\
-	MPC8266ADS	PM826		ppmc8260	RPXsuper	\
-	rsdproto	sacsng		sbc8260		SCM		\
-	TQM8260_AC	TQM8260_AD	TQM8260_AE	ZPC1900		\
+	MPC8266ADS	MPC8272ADS	PM826		PM828		\
+	ppmc8260	PQ2FADS		RPXsuper	rsdproto	\
+	sacsng		sbc8260		SCM		TQM8260_AC	\
+	TQM8260_AD	TQM8260_AE	ZPC1900				\
 "
 
 #########################################################################
@@ -95,7 +97,7 @@ LIST_8260="	\
 #########################################################################
 
 LIST_85xx="	\
-	MPC8540ADS	MPC8560ADS					\
+	MPC8540ADS	MPC8560ADS	stxgp3				\
 "
 
 #########################################################################
@@ -122,29 +124,30 @@ LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
 ## StrongARM Systems
 #########################################################################
 
-LIST_SA="dnp1110 lart shannon"
+LIST_SA="assabet dnp1110 gcplus lart shannon"
 
 #########################################################################
 ## ARM7 Systems
 #########################################################################
 
-LIST_ARM7="ep7312 impa7"
+LIST_ARM7="B2 ep7312 impa7"
 
 #########################################################################
 ## ARM9 Systems
 #########################################################################
 
 LIST_ARM9="	\
-	at91rm9200dk	omap1510inn	omap1610inn			\
+	at91rm9200dk	integratorcp	integratorap			\
+	omap1510inn	omap1610h2	omap1610inn			\
 	smdk2400	smdk2410	trab				\
-	VCMA9								\
+	VCMA9		versatile					\
 "
 
 #########################################################################
 ## Xscale Systems
 #########################################################################
 
-LIST_pxa="cradle csb226 innokom lubbock wepep250"
+LIST_pxa="cradle csb226 innokom lubbock wepep250 xm250"
 
 LIST_ixp="ixdp425"
 
@@ -176,6 +179,8 @@ LIST_x86="${LIST_I486}"
 #########################################################################
 
 LIST_nios="	\
+	ADNPESC1 ADNPESC1_base_32					\
+	ADNPESC1_DNPEVA2_base_32					\
 	DK1C20 DK1C20_standard_32					\
 	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
 "

Makefile

@@ -75,6 +75,9 @@ endif
 ifeq ($(ARCH),m68k)
 CROSS_COMPILE = m68k-elf-
 endif
+ifeq ($(ARCH),microblaze)
+CROSS_COMPILE = mb-
+endif
 endif
 endif
 
@@ -99,7 +102,8 @@ LIBS  = lib_generic/libgeneric.a
 LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a
+LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
+	fs/reiserfs/libreiserfs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
@@ -111,7 +115,8 @@ LIBS += common/libcommon.a
 .PHONY : $(LIBS)
 
 # Add GCC lib
-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBS += --no-warn-mismatch -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+
 
 # The "tools" are needed early, so put this first
 # Don't include stuff already done in $(LIBS)
@@ -164,6 +169,9 @@ depend dep:
 
 tags:
 		ctags -w `find $(SUBDIRS) include \
+				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+				fs/cramfs fs/fat fs/fdos fs/jffs2 \
+				net disk rtc dtt drivers drivers/sk98lin common \
 			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 
 etags:
@@ -185,7 +193,7 @@ endif
 #########################################################################
 
 unconfig:
-	rm -f include/config.h include/config.mk
+	@rm -f include/config.h include/config.mk board/*/config.tmp
 
 #========================================================================
 # PowerPC
@@ -198,29 +206,34 @@ unconfig:
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi
 
-PATI_config:unconfig
+PATI_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx pati mpl
 
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
-MPC5200LITE_config		\
-MPC5200LITE_LOWBOOT_config	\
-MPC5200LITE_LOWBOOT08_config	\
-icecube_5200_DDR_LOWBOOT_config	\
-icecube_5200_DDR_config		\
-IceCube_5200_DDR_config		\
-icecube_5200_config		\
-IceCube_5200_config		\
-IceCube_5100_config:		unconfig
+Lite5200_config				\
+Lite5200_LOWBOOT_config			\
+Lite5200_LOWBOOT08_config		\
+icecube_5200_config			\
+icecube_5200_LOWBOOT_config		\
+icecube_5200_LOWBOOT08_config		\
+icecube_5200_DDR_config 		\
+icecube_5200_DDR_LOWBOOT_config 	\
+icecube_5200_DDR_LOWBOOT08_config	\
+icecube_5100_config:			unconfig
 	@ >include/config.h
-	@[ -z "$(findstring LOWBOOT,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
+		{ if [ "$(findstring DDR,$@)" ] ; \
+			then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
+			else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+		  fi ; \
 		  echo "... with LOWBOOT configuration" ; \
 		}
 	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
 		{ echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
 		  echo "... with 8 MB flash only" ; \
+		  echo "... with LOWBOOT configuration" ; \
 		}
 	@[ -z "$(findstring DDR,$@)" ] || \
 		{ echo "#define CONFIG_MPC5200_DDR"	>>include/config.h ; \
@@ -242,6 +255,9 @@ TOP5200_config:	unconfig
 	@ echo "#define CONFIG_$(@:_config=) 1"	>include/config.h
 	@./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
 
+PM520_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc5xxx pm520
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -260,9 +276,6 @@ FADS860T_config:	unconfig
 AMX860_config	:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
 
-bms2003_config	:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
-
 c2mon_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx c2mon
 
@@ -304,6 +317,9 @@ GTH_config:	unconfig
 hermes_config	:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx hermes
 
+HMI10_config	:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+
 IAD210_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens
 
@@ -352,7 +368,10 @@ IVMS8_config:	unconfig
 	@./mkconfig -a IVMS8 ppc mpc8xx ivm
 
 KUP4K_config	:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx kup4k
+	@./mkconfig $(@:_config=) ppc mpc8xx kup4k kup
+
+KUP4X_config    :       unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx kup4x kup
 
 LANTEC_config	:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx lantec
@@ -385,6 +404,32 @@ NETVIA_config:		unconfig
 		 }
 	@./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 
+xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
+
+NETPHONE_V2_config \
+NETPHONE_config:	unconfig
+	@ >include/config.h
+	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
+		 { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \
+		 }
+	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
+		 { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \
+		 }
+	@./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
+
+xtract_NETTA = $(subst _ISDN,,$(subst _config,,$1))
+
+NETTA_ISDN_config \
+NETTA_config:		unconfig
+	@ >include/config.h
+	@[ -z "$(findstring NETTA_config,$@)" ] || \
+		 { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \
+		 }
+	@[ -z "$(findstring NETTA_ISDN_config,$@)" ] || \
+		 { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
+		 }
+	@./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+
 NX823_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx nx823
 
@@ -537,7 +582,7 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:unconfig
+BUBINGA405EP_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
 
 CANBT_config:	unconfig
@@ -555,9 +600,12 @@ CPCI440_config:	unconfig
 CPCIISER4_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd
 
-CRAYL1_config:unconfig
+CRAYL1_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx L1 cray
 
+csb272_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx csb272
+
 DASA_SIM_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
 
@@ -567,29 +615,38 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:unconfig
+EBONY_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ebony
 
-ERIC_config:unconfig
+ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
 
-EXBITGEN_config:unconfig
+EXBITGEN_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
 
 HUB405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
 
-MIP405_config:unconfig
+JSE_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx jse
+
+MIP405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
 
-MIP405T_config:unconfig
+MIP405T_config:	unconfig
 	@echo "#define CONFIG_MIP405T" >include/config.h
 	@echo "Enable subset config for MIP405T"
 	@./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
 
-ML2_config:unconfig
+ML2_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml2
 
+ml300_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
+
+OCOTEA_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+
 OCRTC_config		\
 ORSG_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
@@ -597,7 +654,7 @@ ORSG_config:	unconfig
 PCI405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
 
-PIP405_config:unconfig
+PIP405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
 
 PLU405_config:	unconfig
@@ -632,16 +689,16 @@ W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:unconfig
+WALNUT405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
 
-XPEDITE1K_config:unconfig
+XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
 #########################################################################
 ## MPC824x Systems
 #########################################################################
-xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
 
 A3000_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x a3000
@@ -665,6 +722,12 @@ CPC45_ROMBOOT_config:	unconfig
 CU824_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x cu824
 
+debris_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x debris etin
+
+eXalion_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x eXalion
+
 MOUSSE_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x mousse
 
@@ -727,38 +790,77 @@ hymod_config:	unconfig
 IPHASE4539_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
 
-MPC8260ADS_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads
+MPC8260ADS_config	\
+MPC8260ADS_33MHz_config	\
+MPC8260ADS_40MHz_config	\
+MPC8272ADS_config	\
+PQ2FADS_config		\
+PQ2FADS-VR_config	\
+PQ2FADS-ZU_config	\
+PQ2FADS-ZU_66MHz_config	\
+	:		unconfig
+	$(if $(findstring PQ2FADS,$@), \
+	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
+	@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h)
+	$(if $(findstring MHz,$@), \
+	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
+	$(if $(findstring VR,$@), \
+	@echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+	@./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
 
 MPC8266ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
 
+# PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
 PM825_config	\
-PM825_ROMBOOT_config: unconfig
-	@echo "#define CONFIG_PCI"	>include/config.h
-	@./mkconfig -a PM826 ppc mpc8260 pm826
-	@cd ./include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		echo "... booting from 8-bit flash" ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
-		echo "... booting from 64-bit flash" ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk; \
-
+PM825_ROMBOOT_config	\
+PM825_BIGFLASH_config	\
+PM825_ROMBOOT_BIGFLASH_config	\
 PM826_config	\
-PM826_ROMBOOT_config: unconfig
-	@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826
-	@cd ./include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
-		echo "... booting from 8-bit flash" ; \
+PM826_ROMBOOT_config	\
+PM826_BIGFLASH_config	\
+PM826_ROMBOOT_BIGFLASH_config:	unconfig
+	@if [ "$(findstring PM825_,$@)" ] ; then \
+		echo "#define CONFIG_PCI"	>include/config.h ; \
+	else \
+		>include/config.h ; \
+	fi
+	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+		echo "... booting from 8-bit flash" ; \
+		echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+		echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
+			echo "... with 32 MB Flash" ; \
+			echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+		fi; \
 	else \
-		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
 		echo "... booting from 64-bit flash" ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> config.mk; \
+		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
+			echo "... with 32 MB Flash" ; \
+			echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+			echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \
+		else \
+			echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \
+		fi; \
+	fi
+	@./mkconfig -a PM826 ppc mpc8260 pm826
+
+PM828_config	\
+PM828_PCI_config	\
+PM828_ROMBOOT_config	\
+PM828_ROMBOOT_PCI_config:	unconfig
+	@if [ -z "$(findstring _PCI_,$@)" ] ; then \
+		echo "#define CONFIG_PCI"  >>include/config.h ; \
+		echo "... with PCI enabled" ; \
+	else \
+		>include/config.h ; \
+	fi
+	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+		echo "... booting from 8-bit flash" ; \
+		echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+		echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+	fi
+	@./mkconfig -a PM828 ppc mpc8260 pm828
 
 ppmc8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
@@ -848,6 +950,9 @@ MPC8540ADS_config:      unconfig
 MPC8560ADS_config:      unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
+stxgp3_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+
 #########################################################################
 ## 74xx/7xx Systems
 #########################################################################
@@ -864,9 +969,6 @@ DB64360_config:  unconfig
 DB64460_config:  unconfig
 	@./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
 
-debris_config: unconfig
-	@./mkconfig $(@:_config=) ppc mpc824x debris etin
-
 ELPPC_config: unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
 
@@ -891,15 +993,18 @@ ZUMA_config:	unconfig
 ## StrongARM Systems
 #########################################################################
 
-at91rm9200dk_config	:	unconfig
-	@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
-
-lart_config	:	unconfig
-	@./mkconfig $(@:_config=) arm sa1100 lart
+assabet_config	:	unconfig
+	@./mkconfig $(@:_config=) arm sa1100 assabet
 
 dnp1110_config	:	unconfig
 	@./mkconfig $(@:_config=) arm sa1100 dnp1110
 
+gcplus_config	:	unconfig
+	@./mkconfig $(@:_config=) arm sa1100 gcplus
+
+lart_config	:	unconfig
+	@./mkconfig $(@:_config=) arm sa1100 lart
+
 shannon_config	:	unconfig
 	@./mkconfig $(@:_config=) arm sa1100 shannon
 
@@ -909,11 +1014,37 @@ shannon_config	:	unconfig
 
 xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
 
+xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
+
+SX1_config :		unconfig
+	@./mkconfig $(@:_config=) arm arm925t sx1
+
+integratorcp_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs integratorcp
+
+integratorap_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs integratorap
+
+versatile_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs versatile
+
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn
 
-omap1610inn_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs omap1610inn
+omap1610inn_config \
+omap1610inn_cs0boot_config \
+omap1610inn_cs3boot_config \
+omap1610h2_config \
+omap1610h2_cs0boot_config \
+omap1610h2_cs3boot_config :	unconfig
+	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
+		echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+		echo "... configured for CS0 boot"; \
+	else \
+		echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+		echo "... configured for CS3 boot"; \
+	fi;
+	@./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
 
 smdk2400_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2400
@@ -949,6 +1080,14 @@ trab_old_config:	unconfig
 VCMA9_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl
 
+
+#########################################################################
+## S3C44B0 Systems
+#########################################################################
+
+B2_config	:	unconfig
+	@./mkconfig $(@:_config=) arm s3c44b0 B2 dave
+
 #########################################################################
 ## ARM720T Systems
 #########################################################################
@@ -959,6 +1098,16 @@ impa7_config	:	unconfig
 ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312
 
+modnet50_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm720t modnet50
+
+#########################################################################
+## AT91RM9200 Systems
+#########################################################################
+
+at91rm9200dk_config	:	unconfig
+	@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
+
 #########################################################################
 ## XScale Systems
 #########################################################################
@@ -984,6 +1133,9 @@ logodl_config	:	unconfig
 wepep250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa wepep250
 
+xm250_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa xm250
+
 #========================================================================
 # i386
 #========================================================================
@@ -1085,6 +1237,35 @@ DK1S10_config:	unconfig
 		}
 	@./mkconfig -a DK1S10 nios nios dk1s10 altera
 
+ADNPESC1_DNPEVA2_base_32_config	\
+ADNPESC1_base_32_config		\
+ADNPESC1_config: unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _DNPEVA2,$@)" ] || \
+		{ echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
+		  echo "... DNP/EVA2 configuration" ; \
+		}
+	@[ -z "$(findstring _base_32,$@)" ] || \
+		{ echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+		  echo "... NIOS 'base_32' configuration" ; \
+		}
+	@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
+		{ echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+		  echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
+		}
+	@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
+
+
+#========================================================================
+# MicroBlaze
+#========================================================================
+#########################################################################
+## Microblaze
+#########################################################################
+suzaku_config:	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_SUZAKU 1" >> include/config.h
+	@./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 #########################################################################
 ## MIPS32 AU1X00
@@ -1115,13 +1296,13 @@ clean:
 	rm -f examples/hello_world examples/timer \
 	      examples/eepro100_eeprom examples/sched \
 	      examples/mem_to_mem_idma2intr examples/82559_eeprom
-
 	rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
+	rm -f tools/mpc86x_clk
 	rm -f tools/easylogo/easylogo tools/bmp_logo
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
-	rm -f board/trab/trab_fkt board/*/config.tmp
+	rm -f board/trab/trab_fkt
 
 clobber:	clean
 	find . -type f \

board/AtmarkTechno/suzaku/Makefile

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2002
+# (C) Copyright 2003
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this

board/AtmarkTechno/suzaku/config.mk

@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2004 Atmark Techno, Inc.
+#
+# Yasushi SHOJI <yashi@atmark-techno.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x80F00000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift

board/AtmarkTechno/suzaku/flash.c

@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+unsigned long flash_init(void)
+{
+	return 0;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	return 0;
+}
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	return 0;
+}

board/AtmarkTechno/suzaku/suzaku.c

@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void do_reset(void)
+{
+}

board/AtmarkTechno/suzaku/u-boot.lds

@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text ALIGN(0x4):
+	{
+		__text_start = .;
+		cpu/microblaze/start.o (.text)
+		*(.text)
+		__text_end = .;
+	}
+
+	.rodata ALIGN(0x4):
+	{
+		__rodata_start = .;
+		*(.rodata)
+		__rodata_end = .;
+	}
+
+	.data ALIGN(0x4):
+	{
+		__data_start = .;
+		*(.data)
+		__data_end = .;
+	}
+
+	.u_boot_cmd ALIGN(0x4):
+	{
+		__u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		__u_boot_cmd_end = .;
+	}
+
+	.bss ALIGN(0x4):
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_start = .;
+	}
+}

board/assabet/Makefile

@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# 2004 (c) MontaVista Software, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= assabet.o
+SOBJS	:= setup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/assabet/assabet.c

@@ -0,0 +1,121 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Board dependent initialisation
+ */
+
+#define ECOR			0x8000
+#define ECOR_RESET		0x80
+#define ECOR_LEVEL_IRQ		0x40
+#define ECOR_WR_ATTRIB		0x04
+#define ECOR_ENABLE		0x01
+
+#define ECSR			0x8002
+#define ECSR_IOIS8		0x20
+#define ECSR_PWRDWN		0x04
+#define ECSR_INT		0x02
+#define SMC_IO_SHIFT		2
+#define NCR_0           	(*((volatile u_char *)(0x100000a0)))
+#define NCR_ENET_OSC_EN		(1<<3)
+
+static inline u8
+readb(volatile u8 * p)
+{
+	return *p;
+}
+
+static inline void
+writeb(u8 v, volatile u8 * p)
+{
+	*p = v;
+}
+
+static void
+smc_init(void)
+{
+	u8 ecor;
+	u8 ecsr;
+	volatile u8 *addr = (volatile u8 *)(0x18000000 + (1 << 25));
+
+	NCR_0 |= NCR_ENET_OSC_EN;
+	udelay(100);
+
+	ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
+	writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
+	udelay(100);
+
+	/*
+	 * The device will ignore all writes to the enable bit while
+	 * reset is asserted, even if the reset bit is cleared in the
+	 * same write.  Must clear reset first, then enable the device.
+	 */
+	writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
+	writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
+
+	/*
+	 * Set the appropriate byte/word mode.
+	 */
+	ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
+	ecsr |= ECSR_IOIS8;
+	writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
+	udelay(100);
+}
+
+static void
+neponset_init(void)
+{
+	smc_init();
+}
+
+int
+board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_arch_number = 25;	/* Intel Assabet Board */
+	gd->bd->bi_boot_params = 0xc0000100;
+
+	neponset_init();
+
+	return 0;
+}
+
+int
+dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return (0);
+}

board/assabet/config.mk

@@ -0,0 +1,7 @@
+#
+# SA-1110 based Intel Assabet board
+#
+# The Intel Assabet 1 bank of 32 MiB SDRAM
+#
+
+TEXT_BASE = 0xc1f00000

board/assabet/setup.S

@@ -0,0 +1,136 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include "config.h"
+#include "version.h"
+
+
+/*-----------------------------------------------------------------------
+ * Board defines:
+ */
+
+#define MDCNFG		0x00
+#define MDCAS00		0x04
+#define MDCAS01		0x08
+#define MDCAS02		0x0C
+#define MSC0		0x10
+#define MSC1		0x14
+#define MECR		0x18
+#define MDREFR		0x1C
+#define MDCAS20		0x20
+#define MDCAS21		0x24
+#define MDCAS22		0x28
+#define MSC2		0x2C
+#define SMCNFG		0x30
+
+#define ASSABET_BCR		(0x12000000)
+#define ASSABET_BCR_DB1110	(0x00a07490 | (0<<16) | (0<<17))
+#define ASSABET_SCR_nNEPONSET	(1 << 9)
+#define NEPONSET_LEDS		(0x10000010)
+
+
+/*-----------------------------------------------------------------------
+ * Setup parameters for the board:
+ */
+
+
+MEM_BASE:	.long	0xa0000000
+MEM_START:	.long	0xc0000000
+
+mdcnfg:		.long	0x72547254
+mdcas00:	.long	0xaaaaaa7f
+mdcas01:	.long	0xaaaaaaaa
+mdcas02:	.long	0xaaaaaaaa
+msc0:		.long	0x4b384370
+msc1:		.long	0x22212419
+mecr:		.long	0x994a994a
+mdrefr:		.long	0x04340327
+mdcas20:	.long	0xaaaaaa7f
+mdcas21:	.long	0xaaaaaaaa
+mdcas22:	.long	0xaaaaaaaa
+msc2:		.long	0x42196669
+smcnfg:		.long	0x00000000
+
+BCR:		.long	ASSABET_BCR
+BCR_DB1110:	.long	ASSABET_BCR_DB1110
+LEDS:		.long	NEPONSET_LEDS
+
+
+	.globl memsetup
+memsetup:
+
+	/* Setting up the memory and stuff */
+
+	ldr	r0, MEM_BASE
+	ldr	r1, mdcas00
+	str	r1, [r0, #MDCAS00]
+	ldr	r1, mdcas01
+	str	r1, [r0, #MDCAS01]
+	ldr	r1, mdcas02
+	str	r1, [r0, #MDCAS02]
+	ldr	r1, mdcas20
+	str	r1, [r0, #MDCAS20]
+	ldr	r1, mdcas21
+	str	r1, [r0, #MDCAS21]
+	ldr	r1, mdcas22
+	str	r1, [r0, #MDCAS22]
+	ldr	r1, mdrefr
+	str	r1, [r0, #MDREFR]
+	ldr	r1, mecr
+	str	r1, [r0, #MECR]
+	ldr	r1, msc0
+	str	r1, [r0, #MSC0]
+	ldr	r1, msc1
+	str	r1, [r0, #MSC1]
+	ldr	r1, msc2
+	str	r1, [r0, #MSC2]
+	ldr	r1, smcnfg
+	str	r1, [r0, #SMCNFG]
+
+	ldr	r1, mdcnfg
+	str	r1, [r0, #MDCNFG]
+
+	/* Load something to activate bank */
+	ldr	r2, MEM_START
+.rept	8
+	ldr	r3, [r2]
+.endr
+
+	/* Enable SDRAM */
+	orr	r1, r1, #0x00000001
+	str	r1, [r0, #MDCNFG]
+
+	ldr	r1, BCR
+	ldr	r2, BCR_DB1110
+	str	r2, [r1]
+
+	ldr	r1, LEDS
+	mov	r0, #0x3
+	str	r0, [r1]
+
+	/* All done... */
+	mov	pc, lr

board/assabet/u-boot.lds

@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+		cpu/sa1100/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}

board/cogent/mb.c

@@ -235,7 +235,7 @@ int misc_init_f (void)
 
 long int initdram (int board_type)
 {
-#if CONFIG_CMA111
+#ifdef CONFIG_CMA111
 	return (32L * 1024L * 1024L);
 #else
 	unsigned char dipsw_val;

board/cpu86/flash.c

@@ -41,10 +41,10 @@ ulong flash_int_get_size (volatile unsigned long *baseaddr,
 	info->sector_count = info->size = 0;
 	info->flash_id = FLASH_UNKNOWN;
 
-	/* Write query command sequence and test FLASH answer
+	/* Write identify command sequence and test FLASH answer
 	 */
-	baseaddr[0] = 0x00980098;
-	baseaddr[1] = 0x00980098;
+	baseaddr[0] = 0x00900090;
+	baseaddr[1] = 0x00900090;
 
 	flashtest_h = baseaddr[0];	/* manufacturer ID	*/
 	flashtest_l = baseaddr[1];

board/csb272/Makefile

@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+#OBJS	= $(BOARD).o flash.o
+#OBJS	= $(BOARD).o strataflash.o
+OBJS	= $(BOARD).o
+
+SOBJS	= init.o
+
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/csb272/config.mk

@@ -0,0 +1,36 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004
+# Tolunay Orkun, NextIO Inc., torkun@nextio.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Cogent CSB272 board
+#
+
+LDFLAGS += $(LINKER_UNDEFS)
+
+TEXT_BASE := 0xFFFC0000
+#TEXT_BASE := 0x00100000
+
+PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)

board/csb272/csb272.c

@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2004
+ * Tolunay Orkun, Nextio Inc., torkun@nextio.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <405gp_enet.h>
+
+/*
+ * Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator
+ *
+ * CLKA output => Epson LCD Controller
+ * CLKB output => Not Connected
+ * CLKC output => Ethernet
+ * CLKD output => UART external clock
+ *
+ * Note: these values are obtained from device after init by micromonitor
+*/
+uchar pll_fs6377_regs[16] = {
+	0x28, 0xef, 0x53, 0x03, 0x4b, 0x80, 0x32, 0x80,
+	0x94, 0x32, 0x80, 0xd4, 0x56, 0xf6, 0xf6, 0xe0 };
+
+/*
+ * pll_init: Initialize AMIS IC FS6377-01 PLL
+ *
+ * PLL supplies Epson LCD Clock, Ethernet Clock and UART external clock
+ *
+ */
+int pll_init(void)
+{
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	return  i2c_write(CFG_I2C_PLL_ADDR, 0, 1,
+		(uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs));
+}
+
+/*
+ * board_early_init_f: do early board initialization
+ *
+ */
+int board_early_init_f(void)
+{
+	/* initialize PLL so UART, LCD, Ethernet clocked at correctly */
+	(void) get_clocks();
+	pll_init();
+
+   /*-------------------------------------------------------------------------+
+   | Interrupt controller setup for the Walnut board.
+   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+   |       IRQ 16    405GP internally generated; active low; level sensitive
+   |       IRQ 17-24 RESERVED
+   |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+   |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+   |       IRQ 27 (EXT IRQ 2) Not Used
+   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+   | Note for Walnut board:
+   |       An interrupt taken for the FPGA (IRQ 25) indicates that either
+   |       the Mouse, Keyboard, IRDA, or External Expansion caused the
+   |       interrupt. The FPGA must be read to determine which device
+   |       caused the interrupt. The default setting of the FPGA clears
+   |
+   +-------------------------------------------------------------------------*/
+
+	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
+	mtdcr (uicer, 0x00000000);   /* disable all ints */
+	mtdcr (uiccr, 0x00000000);   /* set all to be non-critical */
+	mtdcr (uicpr, 0xFFFFFF83);   /* set int polarities */
+	mtdcr (uictr, 0x10000000);   /* set int trigger levels */
+	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
+	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
+
+	mtebc (epcr, 0xa8400000);   /* EBC always driven */
+
+	return 0; /* success */
+}
+
+/*
+ * checkboard: identify/verify the board we are running
+ *
+ * Remark: we just assume it is correct board here!
+ *
+ */
+int checkboard(void)
+{
+	printf("BOARD: Cogent CSB272\n");
+
+	return 0; /* success */
+}
+
+/*
+ * initram: Determine the size of mounted DRAM
+ *
+ * Size is determined by reading SDRAM configuration registers as
+ * configured by initialization code
+ *
+ */
+long initdram (int board_type)
+{
+	ulong tot_size;
+	ulong bank_size;
+	ulong tmp;
+
+	tot_size = 0;
+
+	mtdcr (memcfga, mem_mb0cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	mtdcr (memcfga, mem_mb1cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	mtdcr (memcfga, mem_mb2cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	mtdcr (memcfga, mem_mb3cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	return tot_size;
+}
+
+/*
+ * last_stage_init: final configurations (such as PHY etc)
+ *
+ */
+int last_stage_init(void)
+{
+	/* initialize the PHY */
+	miiphy_reset(CONFIG_PHY_ADDR);
+	miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);	/* AUTO neg */
+	miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);	/* LEDs     */
+
+	return 0; /* success */
+}

board/csb272/init.S

@@ -0,0 +1,216 @@
+/******************************************************************************
+ *
+ *	 This source code has been made available to you by IBM on an AS-IS
+ *	 basis.	 Anyone receiving this source is licensed under IBM
+ *	 copyrights to use it in any way he or she deems fit, including
+ *	 copying it, modifying it, compiling it, and redistributing it either
+ *	 with or without modifications.	 No license under IBM patents or
+ *	 patent applications is to be implied by the copyright license.
+ *
+ *	 Any user of this software should understand that IBM cannot provide
+ *	 technical support for this software and will not be responsible for
+ *	 any consequences resulting from the use of this software.
+ *
+ *	 Any person who transfers this source code or any derivative work
+ *	 must include the IBM copyright notice, this paragraph, and the
+ *	 preceding two paragraphs in the transferred software.
+ *
+ *	 COPYRIGHT   I B M   CORPORATION 1995
+ *	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+ *
+ *****************************************************************************/
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define LI32(reg,val) \
+	addis   reg,0,val@h;\
+	ori     reg,reg,val@l
+
+#define WDCR_EBC(reg,val) \
+	addi    r4,0,reg;\
+	mtdcr   ebccfga,r4;\
+	addis   r4,0,val@h;\
+	ori     r4,r4,val@l;\
+	mtdcr   ebccfgd,r4
+
+#define WDCR_SDRAM(reg,val) \
+	addi    r4,0,reg;\
+	mtdcr   memcfga,r4;\
+	addis   r4,0,val@h;\
+	ori     r4,r4,val@l;\
+	mtdcr   memcfgd,r4
+
+/******************************************************************************
+ * Function:	ext_bus_cntlr_init
+ *
+ * Description:	Configures EBC Controller and a few basic chip selects.
+ *
+ *		CS0 is setup to get the Boot Flash out of the addresss range
+ *		so that we may setup a stack.  CS7 is setup so that we can
+ *		access and reset the hardware watchdog.
+ *
+ *		IMPORTANT: For pass1 this code must run from
+ *		cache since you can not reliably change a peripheral banks
+ *		timing register (pbxap) while running code from that bank.
+ *		For ex., since we are running from ROM on bank 0, we can NOT
+ *		execute the code that modifies bank 0 timings from ROM, so
+ *		we run it from cache.
+ *
+ * Notes:	Does NOT use the stack.
+ *****************************************************************************/
+	.section ".text"
+	.align	2
+	.globl	ext_bus_cntlr_init
+	.type	ext_bus_cntlr_init, @function
+ext_bus_cntlr_init:
+	mflr	r0
+	/********************************************************************
+	 * Prefetch entire ext_bus_cntrl_init function into the icache.
+	 * This is necessary because we are going to change the same CS we
+	 * are executing from.  Otherwise a CPU lockup may occur.
+	 *******************************************************************/
+	bl	..getAddr
+..getAddr:
+	mflr	r3			/* get address of ..getAddr */
+
+	/* Calculate number of cache lines for this function */
+	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+	mtctr	r4
+..ebcloop:
+	icbt	r0, r3			/* prefetch cache line for addr in r3*/
+	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+	bdnz	..ebcloop		/* continue for $CTR cache lines */
+
+	/********************************************************************
+	 * Delay to ensure all accesses to ROM are complete before changing
+	 * bank 0 timings. 200usec should be enough.
+	 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
+	 *******************************************************************/
+	addis	r3, 0, 0x0
+	ori	r3, r3, 0xA000		/* wait 200us from reset */
+	mtctr	r3
+..spinlp:
+	bdnz	..spinlp		/* spin loop */
+
+	/********************************************************************
+	 * SETUP CPC0_CR0
+	 *******************************************************************/
+	LI32(r4, 0x007000c0)
+	mtdcr	cntrl0, r4
+
+	/********************************************************************
+	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
+	 *******************************************************************/
+	mfdcr	r4, cntrl1
+	ori	r4, r4, 0x4000
+	mtdcr	cntrl1, r4
+
+	/********************************************************************
+	 * Setup External Bus Controller (EBC).
+	 *******************************************************************/
+	WDCR_EBC(epcr, 0xd84c0000)
+	/********************************************************************
+	 * Memory Bank 0 (Intel 28F128J3 Flash) initialization
+	 *******************************************************************/
+	/*WDCR_EBC(pb0ap, 0x02869200)*/
+	WDCR_EBC(pb0ap, 0x07869200)
+	WDCR_EBC(pb0cr, 0xfe0bc000)
+	/********************************************************************
+	 * Memory Bank 1 (Holtek HT6542B PS/2) initialization
+	 *******************************************************************/
+	WDCR_EBC(pb1ap, 0x1f869200)
+	WDCR_EBC(pb1cr, 0xf0818000)
+	/********************************************************************
+	 * Memory Bank 2 (Epson S1D13506) initialization
+	 *******************************************************************/
+	WDCR_EBC(pb2ap, 0x05860300)
+	WDCR_EBC(pb2cr, 0xf045a000)
+	/********************************************************************
+	 * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
+	 *******************************************************************/
+	WDCR_EBC(pb3ap, 0x0387d200)
+	WDCR_EBC(pb3cr, 0xf021c000)
+	/********************************************************************
+	 * Memory Bank 4-7 (Unused) initialization
+	 *******************************************************************/
+	WDCR_EBC(pb4ap, 0)
+	WDCR_EBC(pb4cr, 0)
+	WDCR_EBC(pb5ap, 0)
+	WDCR_EBC(pb5cr, 0)
+	WDCR_EBC(pb6ap, 0)
+	WDCR_EBC(pb6cr, 0)
+	WDCR_EBC(pb7ap, 0)
+	WDCR_EBC(pb7cr, 0)
+
+	/* We are all done */
+	mtlr	r0			/* Restore link register */
+	blr				/* Return to calling function */
+.Lfe0:	.size	ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
+/* end ext_bus_cntlr_init() */
+
+/******************************************************************************
+ * Function:	sdram_init
+ *
+ * Description:	Configures SDRAM memory banks.
+ *
+ * Notes:	Does NOT use the stack.
+ *****************************************************************************/
+	.section ".text"
+	.align	2
+	.globl	sdram_init
+	.type	sdram_init, @function
+sdram_init:
+
+	/*
+	 * Disable memory controller to allow
+	 * values to be changed.
+	 */
+	WDCR_SDRAM(mem_mcopt1, 0x00000000)
+
+	/*
+	 * Configure Memory Banks
+	 */
+	WDCR_SDRAM(mem_mb0cf, 0x00084001)
+	WDCR_SDRAM(mem_mb1cf, 0x00000000)
+	WDCR_SDRAM(mem_mb2cf, 0x00000000)
+	WDCR_SDRAM(mem_mb3cf, 0x00000000)
+
+	/*
+	 * Set up SDTR1 (SDRAM Timing Register)
+	 */
+	WDCR_SDRAM(mem_sdtr1, 0x00854009)
+
+	/*
+	 * Set RTR (Refresh Timing Register)
+	 */
+	WDCR_SDRAM(mem_rtr,   0x10000000)
+	/* WDCR_SDRAM(mem_rtr,   0x05f00000) */
+
+	/********************************************************************
+	 * Delay to ensure 200usec have elapsed since reset. Assume worst
+	 * case that the core is running 200Mhz:
+	 *	  200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
+	 *******************************************************************/
+	addis   r3, 0, 0x0000
+	ori     r3, r3, 0xA000		/* Wait >200us from reset */
+	mtctr   r3
+..spinlp2:
+	bdnz    ..spinlp2		/* spin loop */
+
+	/********************************************************************
+	 * Set memory controller options reg, MCOPT1.
+	 *******************************************************************/
+	WDCR_SDRAM(mem_mcopt1,0x80800000)
+
+..sdri_done:
+	blr				/* Return to calling function */
+.Lfe1:	.size	sdram_init,.Lfe1-sdram_init
+/* end sdram_init() */

board/csb272/u-boot.lds

@@ -0,0 +1,151 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/csb272/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    lib_ppc/extable.o	(.text)
+    lib_ppc/board.o	(.text)
+    lib_generic/zlib.o	(.text)
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/dave/B2/B2.c

@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+
+/*
+ * Miscelaneous platform dependent initialization
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	u32 temp;
+
+	/* Configuration Port Control Register*/
+	/* Port A */
+	PCONA = 0x3ff;
+
+	/* Port B */
+	PCONB = 0xff;
+	PDATB = 0xFFFF;
+
+	/* Port C */
+	/*
+	PCONC = 0xff55ff15;
+	PDATC = 0x0;
+	PUPC = 0xffff;
+	*/
+
+	/* Port D */
+	/*
+	PCOND = 0xaaaa;
+	PUPD = 0xff;
+	*/
+
+	/* Port E */
+	PCONE = 0x0001aaa9;
+	PDATE = 0x0;
+	PUPE = 0xff;
+
+	/* Port F */
+	PCONF = 0x124955;
+	PDATF  = 0xff; /* B2-eth_reset tied high level */
+	/*
+	PUPF = 0x1e3;
+	*/
+
+	/* Port G */
+	PUPG = 0x1;
+	PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/
+
+	INTMSK = 0x03fffeff;
+	INTCON = 0x05;
+
+    /*
+    	Configure chip ethernet interrupt as High level
+    	Port G EINT 0-7 EINT0 -> CHIP ETHERNET
+    */
+	temp = EXTINT;
+   	temp &= ~0x7;
+    temp |= 0x1; /*LEVEL_HIGH*/
+	EXTINT = temp;
+
+    /*
+    	Reset SMSC LAN91C96 chip
+    */
+    temp= PCONF;
+    temp |= 0x00000040;
+    PCONF = temp;
+
+	/* Reset high */
+    temp = PDATF;
+    temp |= (1 << 3);
+    PDATF = temp;
+
+    /* Short delay */
+    for (temp=0;temp<10;temp++)
+    {
+		/* NOP */
+    }
+
+    /* Reset low */
+    temp = PDATF;
+    temp &= ~(1 << 3);
+    PDATF = temp;
+
+	/* arch number MACH_TYPE_MBA44B0 */
+	gd->bd->bi_arch_number = 178;
+
+	/* location of boot parameters */
+	gd->bd->bi_boot_params = 0x0c000100;
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return (0);
+}

board/dave/B2/Makefile

@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= B2.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/dave/B2/config.mk

@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x0C100000
+
+PLATFORM_CPPFLAGS += -Uarm

board/dave/B2/flash.c

@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/hardware.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#ifdef __DEBUG_START_FROM_SRAM__
+	return CFG_DUMMY_FLASH_SIZE;
+#else
+	unsigned long size_b0;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (0, &flash_info[0]);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+#endif
+}

board/dave/B2/memsetup.S

@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2004
+ * DAVE Srl
+ *
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures
+ * Modified By MATTO
+ *
+ * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+/*
+ * Documentation:
+ * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor
+ *     Advanced Developer's manual, December 1999
+ *
+ * Intel has a very hard to find SDRAM configurator on their web site:
+ *   http://appzone.intel.com/hcd/sa1110/memory/index.asp
+ *
+ * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This
+ * appears to be true, but it might be possible that somebody designs a
+ * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik
+ *
+ * 04-10-2001:  SELETZ
+ * - separated memory config for multiple platform support
+ * - perform SA1110 Hardware Reset Procedure
+ *
+ */
+
+.equ    B0_Tacs,      0x0 /* 0clk */
+.equ    B0_Tcos,      0x0 /* 0clk */
+.equ    B0_Tacc,      0x4 /* 6clk */
+.equ    B0_Tcoh,      0x0 /* 0clk */
+.equ    B0_Tah,       0x0 /* 0clk */
+.equ    B0_Tacp,      0x0 /* 0clk */
+.equ    B0_PMC,       0x0 /* normal(1data) */
+/* Bank 1 parameter */
+.equ    B1_Tacs,      0x3 /* 4clk */
+.equ    B1_Tcos,      0x3 /* 4clk */
+.equ    B1_Tacc,      0x7 /* 14clkv */
+.equ    B1_Tcoh,      0x3 /* 4clk */
+.equ    B1_Tah,       0x3 /* 4clk */
+.equ    B1_Tacp,      0x3 /* 6clk */
+.equ    B1_PMC,       0x0 /* normal(1data) */
+
+/* Bank 2 parameter - LAN91C96 */
+.equ    B2_Tacs,      0x3 /* 4clk */
+.equ    B2_Tcos,      0x3 /* 4clk */
+.equ    B2_Tacc,      0x7 /* 14clk */
+.equ    B2_Tcoh,      0x3 /* 4clk */
+.equ    B2_Tah,       0x3 /* 4clk */
+.equ    B2_Tacp,      0x3 /* 6clk */
+.equ    B2_PMC,       0x0 /* normal(1data) */
+
+/* Bank 3 parameter */
+.equ    B3_Tacs,      0x3 /* 4clk */
+.equ    B3_Tcos,      0x3 /* 4clk */
+.equ    B3_Tacc,      0x7 /* 14clk */
+.equ    B3_Tcoh,      0x3 /* 4clk */
+.equ    B3_Tah,       0x3 /* 4clk */
+.equ    B3_Tacp,      0x3 /* 6clk */
+.equ    B3_PMC,       0x0 /* normal(1data) */
+
+/* Bank 4 parameter */
+.equ    B4_Tacs,      0x3 /* 4clk */
+.equ    B4_Tcos,      0x3 /* 4clk */
+.equ    B4_Tacc,      0x7 /* 14clk */
+.equ    B4_Tcoh,      0x3 /* 4clk */
+.equ    B4_Tah,       0x3 /* 4clk */
+.equ    B4_Tacp,      0x3 /* 6clk */
+.equ    B4_PMC,       0x0 /* normal(1data) */
+
+/* Bank 5 parameter */
+.equ    B5_Tacs,      0x3 /* 4clk */
+.equ    B5_Tcos,      0x3 /* 4clk */
+.equ    B5_Tacc,      0x7 /* 14clk */
+.equ    B5_Tcoh,      0x3 /* 4clk */
+.equ    B5_Tah,       0x3 /* 4clk */
+.equ    B5_Tacp,      0x3 /* 6clk */
+.equ    B5_PMC,       0x0 /* normal(1data) */
+
+/* Bank 6(if SROM) parameter */
+.equ    B6_Tacs,      0x3 /* 4clk */
+.equ    B6_Tcos,      0x3 /* 4clk */
+.equ    B6_Tacc,      0x7 /* 14clk */
+.equ    B6_Tcoh,      0x3 /* 4clk */
+.equ    B6_Tah,       0x3 /* 4clk */
+.equ    B6_Tacp,      0x3 /* 6clk */
+.equ    B6_PMC,       0x0 /* normal(1data) */
+
+/* Bank 7(if SROM) parameter */
+.equ    B7_Tacs,      0x3 /* 4clk */
+.equ    B7_Tcos,      0x3 /* 4clk */
+.equ    B7_Tacc,      0x7 /* 14clk */
+.equ    B7_Tcoh,      0x3 /* 4clk */
+.equ    B7_Tah,       0x3 /* 4clk */
+.equ    B7_Tacp,      0x3 /* 6clk */
+.equ    B7_PMC,       0x0 /* normal(1data) */
+
+/* Bank 6 parameter */
+.equ    B6_MT,        0x3 /* SDRAM */
+.equ    B6_Trcd,      0x0 /* 2clk */
+.equ    B6_SCAN,      0x0 /* 10bit */
+
+.equ    B7_MT,        0x3 /* SDRAM */
+.equ    B7_Trcd,      0x0 /* 2clk */
+.equ    B7_SCAN,      0x0 /* 10bit */
+
+
+/* REFRESH parameter */
+.equ    REFEN,        0x1 /* Refresh enable */
+.equ    TREFMD,       0x0 /* CBR(CAS before RAS)/Auto refresh */
+.equ    Trp,        0x0 /* 2clk */
+.equ    Trc,        0x3 /* 0x1=5clk 0x3=11clk*/
+.equ    Tchr,       0x0 /* 0x2=3clk 0x0=0clks  */
+.equ    REFCNT,       879
+
+MEMORY_CONFIG:
+  .long   0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/
+  .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/
+  .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/
+  .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/
+  .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/
+  .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/
+  .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/
+  .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))  /*GCS6*/
+  .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))  /*GCS7*/
+  .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)  /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/
+  .word 0x17      /*SCLK power down mode, BANKSIZE 16M/16M*/
+  .word 0x20      /*MRSR6 CL=2clk*/
+  .word 0x20      /*MRSR7*/
+
+
+.globl memsetup
+memsetup:
+
+	/*
+		the next instruction fail due memory relocation...
+		we'll find the right MEMORY_CONFIG address with the next 3 lines...
+	*/
+	/*ldr r0, =MEMORY_CONFIG*/
+	mov r0, pc
+	ldr r1, =(0x38+4)
+	sub r0, r0, r1
+
+	ldmia r0, {r1-r13}
+	ldr   r0, =0x01c80000
+	stmia r0, {r1-r13}
+	mov pc, lr

board/dave/B2/u-boot.lds

@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/s3c44b0/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+	armboot_end_data = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}

board/dave/PPChameleonEVB/u-boot.lds

@@ -73,9 +73,6 @@ SECTIONS
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
     *(.text)
     *(.fixup)
     *(.got1)
@@ -142,6 +139,13 @@ SECTIONS
    *(.bss)
    *(COMMON)
   }
+
+  . = 0xFFFF8000;
+  .ppcenv :
+  {
+    common/environment.o(.ppcenv);
+  }
+
   _end = . ;
   PROVIDE (end = .);
 }

board/dave/common/flash.c

@@ -22,7 +22,6 @@
  */
 
 #include <common.h>
-#include <ppc4xx.h>
 #include <asm/processor.h>
 
 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
@@ -578,15 +577,27 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	if ((l = addr - wp) != 0) {
 		data = 0;
 		for (i=0, cp=wp; i<l; ++i, ++cp) {
+#ifdef CONFIG_B2
+			data = data | ((*(uchar *)cp)<<(8*i));
+#else
 			data = (data << 8) | (*(uchar *)cp);
+#endif
 		}
 		for (; i<4 && cnt>0; ++i) {
+#ifdef CONFIG_B2
+			data = data  | ((*src++)<<(8*i));
+#else
 			data = (data << 8) | *src++;
+#endif
 			--cnt;
 			++cp;
 		}
 		for (; cnt==0 && i<4; ++i, ++cp) {
+#ifdef CONFIG_B2
+			data = data | ((*(uchar *)cp)<<(8*i));
+#else
 			data = (data << 8) | (*(uchar *)cp);
+#endif
 		}
 
 		if ((rc = write_word(info, wp, data)) != 0) {
@@ -600,9 +611,14 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 */
 	while (cnt >= 4) {
 		data = 0;
+#ifdef CONFIG_B2
+		data = (*(ulong*)src);
+		src += 4;
+#else
 		for (i=0; i<4; ++i) {
 			data = (data << 8) | *src++;
 		}
+#endif
 		if ((rc = write_word(info, wp, data)) != 0) {
 			return (rc);
 		}
@@ -619,11 +635,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 */
 	data = 0;
 	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+#ifdef CONFIG_B2
+		data = data  | ((*src++)<<(8*i));
+#else
 		data = (data << 8) | *src++;
+#endif
 		--cnt;
 	}
 	for (; i<4; ++i, ++cp) {
+#ifdef CONFIG_B2
+		data = data | ((*(uchar *)cp)<<(8*i));
+#else
 		data = (data << 8) | (*(uchar *)cp);
+#endif
 	}
 
 	return (write_word(info, wp, data));
@@ -645,8 +669,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	int i;
 
 	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
-	     (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+	if ((*((volatile ulong *)dest) & data) != data) {
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */

board/eXalion/Makefile

@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+SOBJS	=
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/eXalion/config.mk

@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2000, 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Sandpoint boards
+#
+
+#TEXT_BASE = 0x00090000
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)

board/eXalion/eXalion.c

@@ -0,0 +1,292 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+#include <ide.h>
+#include "piix_pci.h"
+#include "eXalion.h"
+
+int checkboard (void)
+{
+	ulong busfreq = get_bus_freq (0);
+	char buf[32];
+
+	printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
+	printf ("Built: %s at %s\n", __DATE__, __TIME__);
+	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));
+
+	return 0;
+}
+
+int checkflash (void)
+{
+	printf ("checkflash\n");
+	flash_init ();
+	return (0);
+}
+
+long int initdram (int board_type)
+{
+	int i, cnt;
+	volatile uchar *base = CFG_SDRAM_BASE;
+	volatile ulong *addr;
+	ulong save[32];
+	ulong val, ret = 0;
+
+	for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
+	     cnt >>= 1) {
+		addr = (volatile ulong *) base + cnt;
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	addr = (volatile ulong *) base;
+	save[i] = *addr;
+	*addr = 0;
+
+	if (*addr != 0) {
+		*addr = save[i];
+		goto Done;
+	}
+
+	for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
+		addr = (volatile ulong *) base + cnt;
+		val = *addr;
+		*addr = save[--i];
+		if (val != ~cnt) {
+			ulong new_bank0_end = cnt * sizeof (long) - 1;
+			ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
+			ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);
+
+			mear1 = (mear1 & 0xFFFFFF00) |
+				((new_bank0_end & MICR_ADDR_MASK) >>
+				 MICR_ADDR_SHIFT);
+			emear1 = (emear1 & 0xFFFFFF00) |
+				((new_bank0_end & MICR_ADDR_MASK) >>
+				 MICR_EADDR_SHIFT);
+			mpc824x_mpc107_setreg (MEAR1, mear1);
+			mpc824x_mpc107_setreg (EMEAR1, emear1);
+
+			ret = cnt * sizeof (long);
+			goto Done;
+		}
+	}
+
+	ret = CFG_MAX_RAM_SIZE;
+      Done:
+	return ret;
+}
+
+int misc_init_r (void)
+{
+	pci_dev_t bdf;
+	u32 val32;
+	u8 val8;
+
+	puts ("ISA:   ");
+	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
+	if (bdf == -1) {
+		puts ("Unable to find PIIX4 ISA bridge !\n");
+		hang ();
+	}
+
+	/* set device for normal ISA instead EIO */
+	pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
+	val32 |= 0x00000001;
+	pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
+	printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
+		PCI_DEV (bdf), PCI_FUNC (bdf));
+
+	puts ("ISA:   ");
+	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
+	if (bdf == -1) {
+		puts ("Unable to find PIIX4 IDE controller !\n");
+		hang ();
+	}
+
+	/* Init BMIBA register  */
+	/* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
+	/* val32 |= 0x1000; */
+	/* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */
+
+	/* Enable BUS master and IO access  */
+	val32 = PCI_COMMAND_MASTER | PCI_COMMAND_IO;
+	pci_write_config_dword (bdf, PCI_COMMAND, val32);
+
+	/* Set latency  */
+	pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
+	val8 = 0x40;
+	pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);
+
+	/* Enable Primary ATA/IDE  */
+	pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
+	/* val32 = 0xa307a307; */
+	val32 = 0x00008000;
+	pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);
+
+
+	printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
+		PCI_DEV (bdf), PCI_FUNC (bdf));
+
+	/* Try to get FAT working... */
+	/* fat_register_read(ide_read); */
+
+
+	return (0);
+}
+
+/*
+ * Show/Init PCI devices on the specified bus number.
+ */
+
+void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char line;
+
+	switch (PCI_DEV (dev)) {
+	case 16:
+		line = PCI_INT_A;
+		break;
+	case 17:
+		line = PCI_INT_B;
+		break;
+	case 18:
+		line = PCI_INT_C;
+		break;
+	case 19:
+		line = PCI_INT_D;
+		break;
+#if defined (CONFIG_MPC8245)
+	case 20:
+		line = PCI_INT_A;
+		break;
+	case 21:
+		line = PCI_INT_B;
+		break;
+	case 22:
+		line = PCI_INT_NA;
+		break;
+#endif
+	default:
+		line = PCI_INT_A;
+		break;
+	}
+	pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
+}
+
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+#ifndef CONFIG_PCI_PNP
+#if defined (CONFIG_MPC8240)
+static struct pci_config_table pci_eXalion_config_table[] = {
+	{
+	 /* Intel 82559ER ethernet controller */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				     PCI_ENET0_MEMADDR,
+				     PCI_COMMAND_MEMORY |
+				     PCI_COMMAND_MASTER}},
+	{
+	 /* Intel 82371AB PIIX4 PCI to ISA bridge */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
+	 pci_cfgfunc_config_device, {0,
+				     0,
+				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
+	{
+	 /* Intel 82371AB PIIX4 IDE controller */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
+	 pci_cfgfunc_config_device, {0,
+				     0,
+				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
+	{}
+};
+#elif defined (CONFIG_MPC8245)
+static struct pci_config_table pci_eXalion_config_table[] = {
+	{
+	 /* Intel 82559ER ethernet controller */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
+	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				     PCI_ENET0_MEMADDR,
+				     PCI_COMMAND_MEMORY |
+				     PCI_COMMAND_MASTER}},
+	{
+	 /* Intel 82559ER ethernet controller */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
+	 pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
+				     PCI_ENET1_MEMADDR,
+				     PCI_COMMAND_MEMORY |
+				     PCI_COMMAND_MASTER}},
+	{
+	 /* Broadcom BCM5690 Gigabit switch */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
+	 pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
+				     PCI_ENET2_MEMADDR,
+				     PCI_COMMAND_MEMORY |
+				     PCI_COMMAND_MASTER}},
+	{
+	 /* Broadcom BCM5690 Gigabit switch */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
+	 pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
+				     PCI_ENET3_MEMADDR,
+				     PCI_COMMAND_MEMORY |
+				     PCI_COMMAND_MASTER}},
+	{
+	 /* Intel 82371AB PIIX4 PCI to ISA bridge */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
+	 pci_cfgfunc_config_device, {0,
+				     0,
+				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
+	{
+	 /* Intel 82371AB PIIX4 IDE controller */
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
+	 pci_cfgfunc_config_device, {0,
+				     0,
+				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
+	{}
+};
+#else
+#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
+#endif
+
+#endif /* #ifndef CONFIG_PCI_PNP */
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table:pci_eXalion_config_table,
+	fixup_irq:pci_eXalion_fixup_irq,
+#endif
+};
+
+void pci_init_board (void)
+{
+	pci_mpc824x_init (&hose);
+}

board/eXalion/eXalion.h

@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * James Dougherty (jfd@broadcom.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EXALION_H
+#define __EXALION_H
+
+/* IRQ settings */
+#define  PCI_INT_NA (0xff)   /* PCI Intr. not used */
+#define  PCI_INT_A  (0x09)   /* PCI Intr. A Interrupt Request Line Nr. */
+#define  PCI_INT_B  (0x0a)   /* PCI Intr. B Interrupt Request Line Nr. */
+#define  PCI_INT_C  (0x0b)   /* PCI Intr. C Interrupt Request Line Nr. */
+#define  PCI_INT_D  (0x0c)   /* PCI Intr. D Interrupt Request Line Nr. */
+#if defined (CPU_MPC8245)
+#define  LN_1_INT     PCI_INT_B  /* ethernet interrupt level */
+#define  LN_2_INT     PCI_INT_C  /* ethernet interrupt level */
+#define  BCM_1_INT    PCI_INT_A  /* BCM5690 interrupt level */
+#define  BCM_2_INT    PCI_INT_B  /* BCM5690 interrupt level */
+#elif defined (CPU_MPC8240)
+#define  BCM_INT      PCI_INT_B  /* BCM5600 interrupt level */
+#define  LN_INT       PCI_INT_C  /* ethernet interrupt level */
+#endif
+
+#ifndef __ASSEMBLY__
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __EXALION_H */

board/eXalion/piix_pci.h

@@ -0,0 +1,172 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _PIIX4_PCI_H
+#define _PIIX4_PCI_H
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#define PIIX4_VENDOR_ID         0x8086
+#define PIIX4_ISA_DEV_ID        0x7110
+#define PIIX4_IDE_DEV_ID        0x7111
+
+/* Function 0 ISA Bridge */
+#define PCI_CFG_PIIX4_IORT      0x4C    /* 8 bit ISA Recovery Timer Reg (default 0x4D) */
+#define PCI_CFG_PIIX4_XBCS      0x4E    /* 16 bit XBus Chip select reg (default 0x0003) */
+#define PCI_CFG_PIIX4_PIRQC     0x60    /* PCI IRQ Route Register 4 x 8bit (default )*/
+#define PCI_CFG_PIIX4_SERIRQ    0x64
+#define PCI_CFG_PIIX4_TOM       0x69
+#define PCI_CFG_PIIX4_MSTAT     0x6A
+#define PCI_CFG_PIIX4_MBDMA     0x76
+#define PCI_CFG_PIIX4_APICBS    0x80
+#define PCI_CFG_PIIX4_DLC       0x82
+#define PCI_CFG_PIIX4_PDMACFG   0x90
+#define PCI_CFG_PIIX4_DDMABS    0x92
+#define PCI_CFG_PIIX4_GENCFG    0xB0
+#define PCI_CFG_PIIX4_RTCCFG    0xCB
+
+/* IO Addresses */
+#define PIIX4_ISA_DMA1_CH0BA    0x00
+#define PIIX4_ISA_DMA1_CH0CA    0x01
+#define PIIX4_ISA_DMA1_CH1BA    0x02
+#define PIIX4_ISA_DMA1_CH1CA    0x03
+#define PIIX4_ISA_DMA1_CH2BA    0x04
+#define PIIX4_ISA_DMA1_CH2CA    0x05
+#define PIIX4_ISA_DMA1_CH3BA    0x06
+#define PIIX4_ISA_DMA1_CH3CA    0x07
+#define PIIX4_ISA_DMA1_CMDST    0x08
+#define PIIX4_ISA_DMA1_REQ      0x09
+#define PIIX4_ISA_DMA1_WSBM     0x0A
+#define PIIX4_ISA_DMA1_CH_MOD   0x0B
+#define PIIX4_ISA_DMA1_CLR_PT   0x0C
+#define PIIX4_ISA_DMA1_M_CLR    0x0D
+#define PIIX4_ISA_DMA1_CLR_M    0x0E
+#define PIIX4_ISA_DMA1_RWAMB    0x0F
+
+#define PIIX4_ISA_DMA2_CH0BA    0xC0
+#define PIIX4_ISA_DMA2_CH0CA    0xC1
+#define PIIX4_ISA_DMA2_CH1BA    0xC2
+#define PIIX4_ISA_DMA2_CH1CA    0xC3
+#define PIIX4_ISA_DMA2_CH2BA    0xC4
+#define PIIX4_ISA_DMA2_CH2CA    0xC5
+#define PIIX4_ISA_DMA2_CH3BA    0xC6
+#define PIIX4_ISA_DMA2_CH3CA    0xC7
+#define PIIX4_ISA_DMA2_CMDST    0xD0
+#define PIIX4_ISA_DMA2_REQ      0xD2
+#define PIIX4_ISA_DMA2_WSBM     0xD4
+#define PIIX4_ISA_DMA2_CH_MOD   0xD6
+#define PIIX4_ISA_DMA2_CLR_PT   0xD8
+#define PIIX4_ISA_DMA2_M_CLR    0xDA
+#define PIIX4_ISA_DMA2_CLR_M    0xDC
+#define PIIX4_ISA_DMA2_RWAMB    0xDE
+
+#define PIIX4_ISA_INT1_ICW1     0x20
+#define PIIX4_ISA_INT1_OCW2     0x20
+#define PIIX4_ISA_INT1_OCW3     0x20
+#define PIIX4_ISA_INT1_ICW2     0x21
+#define PIIX4_ISA_INT1_ICW3     0x21
+#define PIIX4_ISA_INT1_ICW4     0x21
+#define PIIX4_ISA_INT1_OCW1     0x21
+
+#define PIIX4_ISA_INT1_ELCR     0x4D0
+
+#define PIIX4_ISA_INT2_ICW1     0xA0
+#define PIIX4_ISA_INT2_OCW2     0xA0
+#define PIIX4_ISA_INT2_OCW3     0xA0
+#define PIIX4_ISA_INT2_ICW2     0xA1
+#define PIIX4_ISA_INT2_ICW3     0xA1
+#define PIIX4_ISA_INT2_ICW4     0xA1
+#define PIIX4_ISA_INT2_OCW1     0xA1
+#define PIIX4_ISA_INT2_IMR      0xA1 /* read only */
+
+#define PIIX4_ISA_INT2_ELCR     0x4D1
+
+#define PIIX4_ISA_TMR0_CNT_ST   0x40
+#define PIIX4_ISA_TMR1_CNT_ST   0x41
+#define PIIX4_ISA_TMR2_CNT_ST   0x42
+#define PIIX4_ISA_TMR_TCW       0x43
+
+#define PIIX4_ISA_RST_XBUS      0x60
+
+#define PIIX4_ISA_NMI_CNT_ST    0x61
+#define PIIX4_ISA_NMI_ENABLE    0x70
+
+#define PIIX4_ISA_RTC_INDEX     0x70
+#define PIIX4_ISA_RTC_DATA      0x71
+#define PIIX4_ISA_RTCEXT_IND    0x70
+#define PIIX4_ISA_RTCEXT_DATA   0x71
+
+#define PIIX4_ISA_DMA1_CH2LPG   0x81
+#define PIIX4_ISA_DMA1_CH3LPG   0x82
+#define PIIX4_ISA_DMA1_CH1LPG   0x83
+#define PIIX4_ISA_DMA1_CH0LPG   0x87
+#define PIIX4_ISA_DMA2_CH2LPG   0x89
+#define PIIX4_ISA_DMA2_CH3LPG   0x8A
+#define PIIX4_ISA_DMA2_CH1LPG   0x8B
+#define PIIX4_ISA_DMA2_LPGRFR   0x8F
+
+#define PIIX4_ISA_PORT_92       0x92
+
+#define PIIX4_ISA_APM_CONTRL    0xB2
+#define PIIX4_ISA_APM_STATUS    0xB3
+
+#define PIIX4_ISA_COCPU_ERROR   0xF0
+
+/* Function 1 IDE Controller */
+#define PCI_CFG_PIIX4_BMIBA     0x20
+#define PCI_CFG_PIIX4_IDETIM    0x40
+#define PCI_CFG_PIIX4_SIDETIM   0x44
+#define PCI_CFG_PIIX4_UDMACTL   0x48
+#define PCI_CFG_PIIX4_UDMATIM   0x4A
+
+/* Function 2 USB Controller */
+#define PCI_CFG_PIIX4_SBRNUM    0x60
+#define PCI_CFG_PIIX4_LEGSUP    0xC0
+
+/* Function 3 Power Management */
+#define PCI_CFG_PIIX4_PMAB      0x40
+#define PCI_CFG_PIIX4_CNTA      0x44
+#define PCI_CFG_PIIX4_CNTB      0x48
+#define PCI_CFG_PIIX4_GPICTL    0x4C
+#define PCI_CFG_PIIX4_DEVRESD   0x50
+#define PCI_CFG_PIIX4_DEVACTA   0x54
+#define PCI_CFG_PIIX4_DEVACTB   0x58
+#define PCI_CFG_PIIX4_DEVRESA   0x5C
+#define PCI_CFG_PIIX4_DEVRESB   0x60
+#define PCI_CFG_PIIX4_DEVRESC   0x64
+#define PCI_CFG_PIIX4_DEVRESE   0x68
+#define PCI_CFG_PIIX4_DEVRESF   0x6C
+#define PCI_CFG_PIIX4_DEVRESG   0x70
+#define PCI_CFG_PIIX4_DEVRESH   0x74
+#define PCI_CFG_PIIX4_DEVRESI   0x78
+#define PCI_CFG_PIIX4_PMMISC    0x80
+#define PCI_CFG_PIIX4_SMBBA     0x90
+
+
+#endif  /* _PIIX4_PCI_H */

board/eXalion/u-boot.lds

@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc824x/start.o		(.text)
+    lib_ppc/board.o		(.text)
+    lib_ppc/ppcstring.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+	. = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o (.text)
+
+	*(.text)
+
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}

board/emk/common/flash.c

@@ -28,15 +28,53 @@
 
 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define	FLASH_ID_MASK	0xFF
+#if defined (CONFIG_TOP860)
+  typedef unsigned short FLASH_PORT_WIDTH;
+  typedef volatile unsigned short FLASH_PORT_WIDTHV;
+  #define	FLASH_ID_MASK	0xFF
 
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
+  #define FPW	FLASH_PORT_WIDTH
+  #define FPWV	FLASH_PORT_WIDTHV
 
-#define FLASH_CYCLE1	0x0aaa
-#define FLASH_CYCLE2	0x0555
+  #define FLASH_CYCLE1	0x0555
+  #define FLASH_CYCLE2	0x02aa
+  #define FLASH_ID1		0
+  #define FLASH_ID2		1
+  #define FLASH_ID3		0x0e
+  #define FLASH_ID4		0x0F
+#endif
+
+#if defined (CONFIG_TOP5200) && !defined (CONFIG_LITE5200)
+  typedef unsigned char FLASH_PORT_WIDTH;
+  typedef volatile unsigned char FLASH_PORT_WIDTHV;
+  #define	FLASH_ID_MASK	0xFF
+
+  #define FPW	FLASH_PORT_WIDTH
+  #define FPWV	FLASH_PORT_WIDTHV
+
+  #define FLASH_CYCLE1	0x0aaa
+  #define FLASH_CYCLE2	0x0555
+  #define FLASH_ID1		0
+  #define FLASH_ID2		2
+  #define FLASH_ID3		0x1c
+  #define FLASH_ID4		0x1E
+#endif
+
+#if defined (CONFIG_TOP5200) && defined (CONFIG_LITE5200)
+  typedef unsigned char FLASH_PORT_WIDTH;
+  typedef volatile unsigned char FLASH_PORT_WIDTHV;
+  #define	FLASH_ID_MASK	0xFF
+
+  #define FPW	FLASH_PORT_WIDTH
+  #define FPWV	FLASH_PORT_WIDTHV
+
+  #define FLASH_CYCLE1	0x0555
+  #define FLASH_CYCLE2	0x02aa
+  #define FLASH_ID1		0
+  #define FLASH_ID2		1
+  #define FLASH_ID3		0x0E
+  #define FLASH_ID4		0x0F
+#endif
 
 /*-----------------------------------------------------------------------
  * Functions
@@ -165,6 +203,15 @@ void flash_print_info (flash_info_t *info)
 	case FLASH_AM160B:
 		fmt = "29LV160%s (16 Mbit, %s)\n";
 		break;
+	case FLASH_AMLV640U:
+		fmt = "29LV640M (64 Mbit)\n";
+		break;
+	case FLASH_AMDLV065D:
+		fmt = "29LV065D (64 Mbit)\n";
+		break;
+	case FLASH_AMLV256U:
+		fmt = "29LV256M (256 Mbit)\n";
+		break;
 	default:
 		fmt = "Unknown Chip Type\n";
 		break;
@@ -179,12 +226,33 @@ void flash_print_info (flash_info_t *info)
 	printf ("  Sector Start Addresses:");
 
 	for (i=0; i<info->sector_count; ++i) {
+		ulong	size;
+		int		erased;
+		ulong	*flash = (unsigned long *) info->start[i];
+
 		if ((i % 5) == 0) {
 			printf ("\n   ");
 		}
 
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
+		/*
+		 * Check if whole sector is erased
+		 */
+		size =
+			(i != (info->sector_count - 1)) ?
+			(info->start[i + 1] - info->start[i]) >> 2 :
+		(info->start[0] + info->size - info->start[i]) >> 2;
+
+		for (
+			flash = (unsigned long *) info->start[i], erased = 1;
+				(flash != (unsigned long *) info->start[i] + size) && erased;
+					flash++
+			)
+			erased = *flash == ~0x0UL;
+
+		printf (" %08lX %s %s",
+			info->start[i],
+			erased ? "E": " ",
+			info->protect[i] ? "(RO)" : "    ");
 	}
 
 	printf ("\n");
@@ -200,7 +268,6 @@ void flash_print_info (flash_info_t *info)
 ulong flash_get_size (FPWV *addr, flash_info_t *info)
 {
 	int		i;
-	ulong	offset;
 
 	/* Write auto select command: read Manufacturer ID */
 	/* Write auto select command sequence and test FLASH answer */
@@ -212,7 +279,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	 * This works for any bus width and any FLASH device width.
 	 */
 	udelay(100);
-	switch (addr[0] & 0xff) {
+	switch (addr[FLASH_ID1] & 0xff) {
 
 	case (uchar)AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
@@ -225,7 +292,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 #endif
 
 	default:
-		printf ("unknown vendor=%x ", addr[0] & 0xff);
+		printf ("unknown vendor=%x ", addr[FLASH_ID1] & 0xff);
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
@@ -233,33 +300,70 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	}
 
 	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) {
+	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[FLASH_ID2]) {
 
 	case (FPW)AMD_ID_LV160B:
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
-#ifdef CFG_LOWBOOT
-		offset = 0;
-#else
-		offset = 0x00e00000;
-#endif
-		info->start[0] = (ulong)addr + offset;
-		info->start[1] = (ulong)addr + offset + 0x4000;
-		info->start[2] = (ulong)addr + offset + 0x6000;
-		info->start[3] = (ulong)addr + offset + 0x8000;
+		info->start[0] = (ulong)addr;
+		info->start[1] = (ulong)addr + 0x4000;
+		info->start[2] = (ulong)addr + 0x6000;
+		info->start[3] = (ulong)addr + 0x8000;
 		for (i = 4; i < info->sector_count; i++)
 		{
-			info->start[i] = (ulong)addr + offset + 0x10000 * (i-3);
+			info->start[i] = (ulong)addr + 0x10000 * (i-3);
 		}
 		break;
 
+	case (FPW)AMD_ID_LV065D:
+		info->flash_id += FLASH_AMDLV065D;
+		info->sector_count = 128;
+		info->size = 0x00800000;
+		for (i = 0; i < info->sector_count; i++)
+		{
+			info->start[i] = (ulong)addr + 0x10000 * i;
+		}
+		break;
+
+	case (FPW)AMD_ID_MIRROR:
+		/* MIRROR BIT FLASH, read more ID bytes */
+		if ((FPW)addr[FLASH_ID3] == (FPW)AMD_ID_LV640U_2 &&
+			(FPW)addr[FLASH_ID4] == (FPW)AMD_ID_LV640U_3)
+		{
+			info->flash_id += FLASH_AMLV640U;
+			info->sector_count = 128;
+			info->size = 0x00800000;
+			for (i = 0; i < info->sector_count; i++)
+			{
+				info->start[i] = (ulong)addr + 0x10000 * i;
+			}
+			break;
+		}
+		if ((FPW)addr[FLASH_ID3] == (FPW)AMD_ID_LV256U_2 &&
+			(FPW)addr[FLASH_ID4] == (FPW)AMD_ID_LV256U_3)
+		{
+			/* attention: only the first 16 MB will be used in u-boot */
+			info->flash_id += FLASH_AMLV256U;
+			info->sector_count = 256;
+			info->size = 0x01000000;
+			for (i = 0; i < info->sector_count; i++)
+			{
+				info->start[i] = (ulong)addr + 0x10000 * i;
+			}
+			break;
+		}
+
+		/* fall thru to here ! */
 	default:
-		printf ("unknown AMD device=%x ", (FPW)addr[2]);
+		printf ("unknown AMD device=%x %x %x",
+			(FPW)addr[FLASH_ID2],
+			(FPW)addr[FLASH_ID3],
+			(FPW)addr[FLASH_ID4]);
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
+		info->size = 0x800000;
+		break;
 	}
 
 	/* Put FLASH back in read mode */
@@ -290,6 +394,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 	switch (info->flash_id & FLASH_TYPEMASK) {
 	case FLASH_AM160B:
+	case FLASH_AMLV640U:
 		break;
 	case FLASH_UNKNOWN:
 	default:

board/emk/top5200/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	:= $(BOARD).o flash.o
+OBJS	:= $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)

board/emk/top5200/flash.c

@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-#define	FLASH_ID_MASK	0xFF
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1	0x0aaa
-#define FLASH_CYCLE2	0x0555
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	int i = 0;
-	extern void flash_preinit(void);
-	extern void flash_afterinit(uint, ulong, ulong);
-	ulong flashbase = CFG_FLASH_BASE;
-
-	flash_preinit();
-
-	/* There is only ONE FLASH device */
-	memset(&flash_info[i], 0, sizeof(flash_info_t));
-	flash_info[i].size =
-			flash_get_size((FPW *)flashbase, &flash_info[i]);
-	size += flash_info[i].size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
-#endif
-
-#ifdef	CFG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
-#endif
-
-
-	flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size &&
-			info->start[0] <= base && base <= info->start[0] + info->size - 1)
-			break;
-	}
-
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	uchar *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-#if 0
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-#endif
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM160T:
-	case FLASH_AM160B:
-		fmt = "29LV160%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_AMDLV065D:
-		fmt = "29LV065 (64 Mbit, uniform sectors)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	int		i;
-	ulong	offset;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	udelay(100);
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-#if 0
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-#endif
-
-	default:
-		printf ("unknown vendor=%x ", addr[0] & 0xff);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) {
-
-	case (FPW)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-#ifdef CFG_LOWBOOT
-		offset = 0;
-#else
-		offset = 0x00e00000;
-#endif
-		info->start[0] = (ulong)addr + offset;
-		info->start[1] = (ulong)addr + offset + 0x4000;
-		info->start[2] = (ulong)addr + offset + 0x6000;
-		info->start[3] = (ulong)addr + offset + 0x8000;
-		for (i = 4; i < info->sector_count; i++)
-		{
-			info->start[i] = (ulong)addr + offset + 0x10000 * (i-3);
-		}
-		break;
-
-	case (FPW)AMD_ID_LV065D:
-		info->flash_id += FLASH_AMDLV065D;
-		info->sector_count = 128;
-		info->size = 0x00800000;
-#ifdef CFG_LOWBOOT
-		offset = 0;
-#else
-		offset = 0x00800000;
-#endif
-		for( i = 0; i < info->sector_count; i++ )
-			info->start[i] = (ulong)addr + offset + (i * 0x10000);
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		printf ("unknown AMD device=%x ", (FPW)addr[2]);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMDLV065D:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	last  = get_timer(0);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			base[FLASH_CYCLE1] = (FPW)0x00800080;	/* erase mode */
-			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		start = get_timer(0);
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((get_timer(last)) > CFG_HZ) {/* every second */
-				putc ('.');
-				last = get_timer(0);
-			}
-		}
-
-		/* show that we're waiting */
-		if ((get_timer(last)) > CFG_HZ) {	/* every second */
-			putc ('.');
-			last = get_timer(0);
-		}
-
-		flash_reset(info);	/* reset to read mode	*/
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-	int bytes;	  /* number of bytes to program in current word		*/
-	int left;	  /* number of bytes left to program			*/
-	int i, res;
-
-	for (left = cnt, res = 0;
-		 left > 0 && res == 0;
-		 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-		bytes = addr & (sizeof(data) - 1);
-		addr &= ~(sizeof(data) - 1);
-
-		/* combine source and destination data so can program
-		 * an entire word of 16 or 32 bits
-		 */
-		for (i = 0; i < sizeof(data); i++) {
-			data <<= 8;
-			if (i < bytes || i - bytes >= left )
-				data += *((uchar *)addr + i);
-			else
-				data += *src++;
-		}
-
-		/* write one word to the flash */
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			res = write_word_amd(info, (FPWV *)addr, data);
-			break;
-		default:
-			/* unknown flash type, error! */
-			printf ("missing or unknown FLASH type\n");
-			res = 1;	/* not really a timeout, but gives error */
-			break;
-		}
-	}
-
-	return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;	/* result, assume success	*/
-	FPWV *base;		/* first address in flash bank	*/
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-
-	base = (FPWV *)(info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data	*/
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer (0);
-
-	/* data polling for D7 */
-	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*dest = (FPW)0x00F000F0;	/* reset bank */
-			res = 1;
-		}
-	}
-
-	return (res);
-}

board/emk/top5200/top5200.c

@@ -57,7 +57,7 @@ long int initdram (int board_type)
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
 	/* precharge all banks */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
-#if CFG_DRAM_DDR
+#ifdef CFG_DRAM_DDR
 	/* set extended mode register */
 	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
 #endif
@@ -113,11 +113,15 @@ int checkboard (void)
 #if defined (CONFIG_EVAL5200)
 	puts ("Board: EMK TOP5200 on EVAL5200\n");
 #else
+#if defined (CONFIG_LITE5200)
+	puts ("Board: LITE5200\n");
+#else
 #if defined (CONFIG_MINI5200)
 	puts ("Board: EMK TOP5200 on MINI5200\n");
 #else
 	puts ("Board: EMK TOP5200\n");
 #endif
+#endif
 #endif
 	return 0;
 }
@@ -155,54 +159,11 @@ void flash_afterinit(uint bank, ulong start, ulong size)
  *****************************************************************************/
 int misc_init_r (void)
 {
+#if !defined (CONFIG_LITE5200)
 	/* read 'factory' part of EEPROM */
-	uchar buf[81];
-	uchar *p;
-	uint length;
-	uint addr;
-	uint len;
-
-	/* get length first */
-	addr = CFG_FACT_OFFSET;
-	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
-bailout:
-		printf ("cannot read factory configuration\n");
-		printf ("be sure to set ethaddr	yourself!\n");
-		return 0;
-	}
-	length = buf[0] + (buf[1] << 8);
-	addr += 2;
-
-	/* sanity check */
-	if (length < 20 || length > CFG_FACT_SIZE - 2)
-		goto bailout;
-
-	/* read lines */
-	while (length > 0) {
-		/* read one line */
-		len = length > 80 ? 80 : length;
-		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
-			goto bailout;
-		/* mark end of buffer */
-		buf[len] = 0;
-		/* search end of line */
-		for (p = buf; *p && *p != 0x0a; p++);
-		if (!*p)
-			goto bailout;
-		*p++ = 0;
-		/* advance to next line start */
-		length -= p - buf;
-		addr += p - buf;
-		/*printf ("%s\n", buf); */
-		/* search for our specific entry */
-		if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
-			setenv ("ethaddr", buf + 19);
-		} else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
-			setenv ("serial#", buf + 15);
-		} else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
-			setenv ("board_id", buf + 13);
-		}
-	}
+	extern void read_factory_r (void);
+	read_factory_r ();
+#endif
 	return (0);
 }
 
@@ -219,3 +180,31 @@ void pci_init_board(void)
 	pci_mpc5xxx_init(&hose);
 }
 #endif
+
+/*****************************************************************************
+ * provide the IDE Reset Function
+ *****************************************************************************/
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+#define GPIO_PSC1_4	0x01000000UL
+
+void init_ide_reset (void)
+{
+	debug ("init_ide_reset\n");
+
+    	/* Configure PSC1_4 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+}
+
+void ide_set_reset (int idereset)
+{
+	debug ("ide_reset(%d)\n", idereset);
+
+	if (idereset) {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+	} else {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+	}
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */

board/emk/top860/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)

board/emk/top860/flash.c

@@ -1,489 +0,0 @@
-/*
- * (C) Copyright 2003
- * EMK Elektronik GmbH <www.emk-elektronik.de>
- * Reinhard Meyer <r.meyer@emk-elektronik.de>
- *
- * copied from the BMW Port - seems that its similiar enough
- * to be easily adaped ;) --- Well, it turned out to become a
- * merger between parts of the EMKstax Flash routines and the
- * BMW funtion frames...
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define	FLASH_WORD_SIZE		unsigned short
-#define FLASH_WORD_WIDTH	(sizeof (FLASH_WORD_SIZE))
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-
-/*****************************************************************************
- * software product ID entry/exit
- *****************************************************************************/
-static void FlashProductIdMode (
-	volatile FLASH_WORD_SIZE *b,
-	int on_off)
-{
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	b[0x5555] = on_off ? 0x90 : 0xf0;
-}
-
-/*****************************************************************************
- * sector erase start
- *****************************************************************************/
-static void FlashSectorErase (
-	volatile FLASH_WORD_SIZE *b,
-	volatile FLASH_WORD_SIZE *a)
-{
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	b[0x5555] = 0x80;
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	a[0] = 0x30;
-}
-
-/*****************************************************************************
- * program a word
- *****************************************************************************/
-static void FlashProgWord (
-	volatile FLASH_WORD_SIZE *b,
-	volatile FLASH_WORD_SIZE *a,
-	FLASH_WORD_SIZE v)
-{
-	b[0x5555] = 0xaa;
-	b[0x2aaa] = 0x55;
-	b[0x5555] = 0xa0;
-	a[0] = v;
-}
-
-/*****************************************************************************
- * reset bank, back to read mode
- *****************************************************************************/
-static void FlashReset (volatile FLASH_WORD_SIZE *b)
-{
-	b[0] = 0xf0;
-}
-
-/*****************************************************************************
- * identify FLASH chip
- * this code is a stripped version of the FlashGetType() function in EMKstax
- *****************************************************************************/
-unsigned long flash_init (void)
-{
-	volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE;
-	FLASH_WORD_SIZE	manu, dev;
-	flash_info_t * const pflinfo = &flash_info[0];
-	int j;
-
-	/* get Id Bytes */
-	FlashProductIdMode (flash, 1);
-	manu = flash[0];
-	dev  = flash[1];
-	FlashProductIdMode (flash, 0);
-
-	pflinfo->size = 0;
-	pflinfo->sector_count = 0;
-	pflinfo->flash_id = 0xffffffff;
-	pflinfo->portwidth = FLASH_CFI_16BIT;
-	pflinfo->chipwidth = FLASH_CFI_BY16;
-
-	switch (manu&0xff)
-	{
-	case 0x01:	/* AMD */
-		pflinfo->flash_id = FLASH_MAN_AMD;
-		switch (dev&0xff)
-		{
-		case 0x49:
-			pflinfo->size = 0x00200000;
-			pflinfo->sector_count = 35;
-			pflinfo->flash_id |= FLASH_AM160B;
-			pflinfo->start[0] = CFG_FLASH_BASE;
-			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
-			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
-			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
-			for (j = 4; j < 35; j++)
-			{
-				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3);
-			}
-			break;
-
-		case 0xf9:
-			pflinfo->size = 0x00400000;
-			pflinfo->sector_count = 71;
-			pflinfo->flash_id |= FLASH_AM320B;
-			pflinfo->start[0] = CFG_FLASH_BASE;
-			pflinfo->start[1] = CFG_FLASH_BASE + 0x4000;
-			pflinfo->start[2] = CFG_FLASH_BASE + 0x6000;
-			pflinfo->start[3] = CFG_FLASH_BASE + 0x8000;
-			for (j = 0; j < 8; j++)
-			{
-				pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j);
-			}
-			for (j = 8; j < 71; j++)
-			{
-				pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7);
-			}
-			break;
-
-		default:
-			printf ("unknown AMD dev=%x ", dev);
-			pflinfo->flash_id |= FLASH_UNKNOWN;
-		}
-		break;
-
-	default:
-		printf ("unknown manu=%x ", manu);
-	}
-	return pflinfo->size;
-}
-
-/*****************************************************************************
- * print info about a FLASH
- *****************************************************************************/
-void flash_print_info (flash_info_t *info)
-{
-	static const char	unk[] = "Unknown";
-	unsigned int		i;
-	const char			*mfct=unk,
-						*type=unk;
-
-	if(info->flash_id != FLASH_UNKNOWN)
-	{
-		switch (info->flash_id & FLASH_VENDMASK)
-		{
-		case FLASH_MAN_AMD:
-			mfct = "AMD";
-			break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK)
-		{
-		case FLASH_AM160B:
-			type = "AM29LV160B (16 Mbit, bottom boot sect)";
-			break;
-		case FLASH_AM320B:
-			type = "AM29LV320B (32 Mbit, bottom boot sect)";
-			break;
-		}
-	}
-
-	printf (
-		"\n  Brand: %s Type: %s\n"
-		"  Size: %lu KB in %d Sectors\n",
-		mfct,
-		type,
-		info->size >> 10,
-		info->sector_count
-		);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; i++)
-	{
-		unsigned long	size;
-		unsigned int	erased;
-		unsigned long	*flash = (unsigned long *) info->start[i];
-
-		/*
-		 * Check if whole sector is erased
-		 */
-		size =
-			(i != (info->sector_count - 1)) ?
-			(info->start[i + 1] - info->start[i]) >> 2 :
-		(info->start[0] + info->size - info->start[i]) >> 2;
-
-		for (
-			flash = (unsigned long *) info->start[i], erased = 1;
-				(flash != (unsigned long *) info->start[i] + size) && erased;
-					flash++
-			)
-			erased = *flash == ~0x0UL;
-
-		printf (
-			"%s %08lX %s %s",
-			(i % 5) ? "" : "\n   ",
-			info->start[i],
-			erased ? "E" : " ",
-			info->protect[i] ? "RO" : "  "
-			);
-	}
-
-	puts ("\n");
-	return;
-}
-
-/*****************************************************************************
- * erase one or more sectors
- *****************************************************************************/
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE	*addr = (FLASH_WORD_SIZE *)(info->start[0]);
-	int							flag,
-								prot,
-								sect,
-								l_sect;
-	ulong						start,
-								now,
-								last;
-
-	if ((s_first < 0) || (s_first > s_last))
-	{
-		if (info->flash_id == FLASH_UNKNOWN)
-		{
-			printf ("- missing\n");
-		}
-		else
-		{
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-		(info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP)))
-	{
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect)
-	{
-		if (info->protect[sect])
-		{
-			prot++;
-		}
-	}
-
-	if (prot)
-	{
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	}
-	else
-	{
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++)
-	{
-		if (info->protect[sect] == 0)
-		{ /* not protected */
-			FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]);
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	* We wait for the last triggered sector
-	*/
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (FLASH_WORD_SIZE *)info->start[l_sect];
-	while ((addr[0] & 0x0080) != 0x0080)
-	{
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT)
-		{
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000)
-		{  /* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-	DONE:
-	/* reset to read mode */
-	FlashReset ((FLASH_WORD_SIZE *)info->start[0]);
-
-	printf (" done\n");
-	return 0;
-}
-
-/*****************************************************************************
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- *****************************************************************************/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong		cp,
-				wp,
-				data;
-	int			i,
-				l,
-				rc;
-
-	wp = (addr & ~(FLASH_WORD_WIDTH-1));   /* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes, if there are...
-	 */
-	if ((l = addr - wp) != 0)
-	{
-		data = 0;
-
-		/* get the current before the new data into our data word */
-		for (i=0, cp=wp; i<l; ++i, ++cp)
-		{
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		/* now merge the to be programmed values */
-		for (; i<4 && cnt>0; ++i, ++cp, --cnt)
-		{
-			data = (data << 8) | *src++;
-		}
-
-		/* get the current after the new data into our data word */
-		for (; cnt==0 && i<FLASH_WORD_WIDTH; ++i, ++cp)
-		{
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		/* now write the combined word */
-		if ((rc = write_word (info, wp, data)) != 0)
-		{
-			return (rc);
-		}
-		wp += FLASH_WORD_WIDTH;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= FLASH_WORD_WIDTH)
-	{
-		data = 0;
-		for (i=0; i<FLASH_WORD_WIDTH; ++i)
-		{
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word (info, wp, data)) != 0)
-		{
-			return (rc);
-		}
-		wp  += FLASH_WORD_WIDTH;
-		cnt -= FLASH_WORD_WIDTH;
-	}
-
-	if (cnt == 0)
-	{
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes, if there are...
-	 */
-	data = 0;
-
-	/* now merge the to be programmed values */
-	for (i=0, cp=wp; i<FLASH_WORD_WIDTH && cnt>0; ++i, ++cp)
-	{
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-
-	/* get the current after the new data into our data word */
-	for (; i<FLASH_WORD_WIDTH; ++i, ++cp)
-	{
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	/* now write the combined word */
-	return (write_word (info, wp, data));
-}
-
-/*****************************************************************************
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- *****************************************************************************/
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE	*addr2 = (FLASH_WORD_SIZE *)info->start[0];
-	volatile FLASH_WORD_SIZE	*dest2 = (FLASH_WORD_SIZE *)dest;
-	FLASH_WORD_SIZE				data2 = data;
-	ulong						start;
-	int							flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest2 & data2) != data2)
-	{
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	FlashProgWord (addr2, dest2, data2);
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*dest2 & 0x0080) != (data2 & 0x0080))
-	{
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT)
-		{
-			return (1);
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */

board/emk/top860/top860.c

@@ -119,6 +119,20 @@ long int initdram (int board_type)
 	return -(memctl->memc_or2 & 0xffff0000);
 }
 
+/*****************************************************************************
+ * prepare for FLASH detection
+ *****************************************************************************/
+void flash_preinit(void)
+{
+}
+
+/*****************************************************************************
+ * finalize FLASH setup
+ *****************************************************************************/
+void flash_afterinit(uint bank, ulong start, ulong size)
+{
+}
+
 /*****************************************************************************
  * otherinits after RAM is there and we are relocated to RAM
  * note: though this is an int function, nobody cares for the result!
@@ -126,52 +140,8 @@ long int initdram (int board_type)
 int misc_init_r (void)
 {
 	/* read 'factory' part of EEPROM */
-	uchar buf[81];
-	uchar *p;
-	uint length;
-	uint addr;
-	uint len;
+	extern void read_factory_r (void);
+	read_factory_r ();
 
-	/* get length first */
-	addr = CFG_FACT_OFFSET;
-	if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) {
-	  bailout:
-		printf ("cannot read factory configuration\n");
-		printf ("be sure to set ethaddr	yourself!\n");
-		return 0;
-	}
-	length = buf[0] + (buf[1] << 8);
-	addr += 2;
-
-	/* sanity check */
-	if (length < 20 || length > CFG_FACT_SIZE - 2)
-		goto bailout;
-
-	/* read lines */
-	while (length > 0) {
-		/* read one line */
-		len = length > 80 ? 80 : length;
-		if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len))
-			goto bailout;
-		/* mark end of buffer */
-		buf[len] = 0;
-		/* search end of line */
-		for (p = buf; *p && *p != 0x0a; p++);
-		if (!*p)
-			goto bailout;
-		*p++ = 0;
-		/* advance to next line start */
-		length -= p - buf;
-		addr += p - buf;
-		/*printf ("%s\n", buf); */
-		/* search for our specific entry */
-		if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) {
-			setenv ("ethaddr", buf + 19);
-		} else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) {
-			setenv ("serial#", buf + 15);
-		} else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) {
-			setenv ("board_id", buf + 13);
-		}
-	}
 	return (0);
 }

board/esd/ar405/fpgadata.c

@@ -2747,4 +2747,4 @@
  0x05,0x02,0x02,0x03,0x02,0x02,0x03,0x02,0x02,0x01,0x07,0x03,0x02,0x02,0x02,0x04,
  0x02,0x01,0x04,0x02,0x01,0x02,0x01,0x02,0x01,0x01,0xe5,0x05,0x04,0x03,0x07,0xe5,
  0xe5,0x03,0x04,0x04,0x0b,0x02,0xe5,0x01,0xe5,0x01,0xe5,0xff,0xff,0xff,0xff,0xff,
- 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
+ 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

board/etin/debris/debris.c

@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <i2c.h>
 
 int checkboard (void)
 {
@@ -52,28 +53,70 @@ int checkflash (void)
 
 long int initdram (int board_type)
 {
-	long size;
-#if 0
-	long new_bank0_end;
-	long mear1;
-	long emear1;
-#endif
+	int m, row, col, bank, i;
+	unsigned long start, end;
+	uint32_t mccr1;
+	uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
+	uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
+	uint8_t mber = 0;
 
-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
 
-#if 0
-	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg(MEAR1);
-	emear1 = mpc824x_mpc107_getreg(EMEAR1);
-	mear1 = (mear1  & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
-	emear1 = (emear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg(MEAR1, mear1);
-	mpc824x_mpc107_setreg(EMEAR1, emear1);
-#endif
+	if (i2c_reg_read (0x50, 2) != 0x04) return 0;	/* Memory type */
+	m = i2c_reg_read (0x50, 5);	/* # of physical banks */
+	row = i2c_reg_read (0x50, 3);	/* # of rows */
+	col = i2c_reg_read (0x50, 4);	/* # of columns */
+	bank = i2c_reg_read (0x50, 17);	/* # of logical banks */
 
-	return (size);
+	CONFIG_READ_WORD(MCCR1, mccr1);
+	mccr1 &= 0xffff0000;
+
+	start = CFG_SDRAM_BASE;
+	end = start + (1 << (col + row + 3) ) * bank - 1;
+
+	for (i = 0; i < m; i++) {
+		mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
+		if (i < 4) {
+			msar1  |= ((start >> 20) & 0xff) << i * 8;
+			emsar1 |= ((start >> 28) & 0xff) << i * 8;
+			mear1  |= ((end >> 20) & 0xff) << i * 8;
+			emear1 |= ((end >> 28) & 0xff) << i * 8;
+		} else {
+			msar2  |= ((start >> 20) & 0xff) << (i-4) * 8;
+			emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
+			mear2  |= ((end >> 20) & 0xff) << (i-4) * 8;
+			emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
+		}
+		mber |= 1 << i;
+		start += (1 << (col + row + 3) ) * bank;
+		end += (1 << (col + row + 3) ) * bank;
+	}
+	for (; i < 8; i++) {
+		if (i < 4) {
+			msar1  |= 0xff << i * 8;
+			emsar1 |= 0x30 << i * 8;
+			mear1  |= 0xff << i * 8;
+			emear1 |= 0x30 << i * 8;
+		} else {
+			msar2  |= 0xff << (i-4) * 8;
+			emsar2 |= 0x30 << (i-4) * 8;
+			mear2  |= 0xff << (i-4) * 8;
+			emear2 |= 0x30 << (i-4) * 8;
+		}
+	}
+
+	CONFIG_WRITE_WORD(MCCR1, mccr1);
+	CONFIG_WRITE_WORD(MSAR1, msar1);
+	CONFIG_WRITE_WORD(EMSAR1, emsar1);
+	CONFIG_WRITE_WORD(MEAR1, mear1);
+	CONFIG_WRITE_WORD(EMEAR1, emear1);
+	CONFIG_WRITE_WORD(MSAR2, msar2);
+	CONFIG_WRITE_WORD(EMSAR2, emsar2);
+	CONFIG_WRITE_WORD(MEAR2, mear2);
+	CONFIG_WRITE_WORD(EMEAR2, emear2);
+	CONFIG_WRITE_BYTE(MBER, mber);
+
+	return (1 << (col + row + 3) ) * bank * m;
 }
 
 /*

board/evb64260/sdram_init.c

@@ -341,11 +341,7 @@ static int setup_sdram_common (sdram_info_t info[2])
 			tras_clocks = info[0].tras_clocks;
 		if (!info[0].registered)
 			registered = 0;
-		if (info[0].ecc != 2indent: Standard input:491: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
-
-indent: Standard input:492: Warning:old style assignment ambiguity in "=*".  Assuming "= *"
-
-)
+		if (info[0].ecc != 2)
 			ecc = 0;
 	}
 

board/gcplus/Makefile

@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# 2003 (c) MontaVista Software, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= gcplus.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/gcplus/config.mk

@@ -0,0 +1,13 @@
+#
+# ADS GCPlus board with SA1110 cpu
+#
+# The ADS GCPlus has 2 banks of 16 MiB SDRAM
+#
+# We use the ADS GCPlus Linux boot ROM to load U-Boot into SDRAM
+# at c020'0000 and then move ourself to c8f0'0000. Basically, just
+# install the U-Boot binary as you would the Linux zImage and then
+# reap the benfits of more convenient Linux development cycles, i.e.
+# bootp;tftp;bootm, repeat, etc.,.
+#
+
+TEXT_BASE = 0xc8f00000

board/gcplus/flash.c

@@ -0,0 +1,440 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * 2003 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)				__swab16(x)
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)				__swab32(x)
+#endif
+
+#define FPW				FLASH_PORT_WIDTH
+#define FPWV				FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPW * addr, flash_info_t * info);
+static int write_data(flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+void inline spin_wheel(void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long
+flash_init(void)
+{
+	int i;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
+			break;
+		default:
+			panic("configured too many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_FLASH_BASE,
+		      CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void
+flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+			info->protect[i] = 0;
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info(flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf("INTEL ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F128J3A:
+		printf("28F128J3A\n");
+		break;
+	case FLASH_28F640J5:
+		printf("28F640J5\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		break;
+	}
+
+	printf("  Size: %ld MB in %d Sectors\n",
+	       info->size >> 20, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+		       info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong
+flash_get_size(FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb();
+	value = addr[0];
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);	/* no or unknown flash  */
+	}
+
+	mb();
+	value = addr[1];	/* device ID            */
+	switch (value) {
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x02000000;
+		break;		/* => 16 MB     */
+	case (FPW) INTEL_ID_28F640J5:
+		info->flash_id += FLASH_28F640J5;
+		info->sector_count = 64;
+		info->size = 0x01000000;
+		break;		/* => 16 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf("** ERROR: sector count %d > max (%d) **\n",
+		       info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf("- missing\n");
+		} else {
+			printf("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf("Can't erase unknown flash type %08lx - aborted\n",
+		       info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	} else {
+		printf("\n");
+	}
+
+	start = get_timer(0);
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf("Erasing sector %2d ... ", sect);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked();
+
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
+
+			while (((status =
+				 *addr) & (FPW) 0x00800080) !=
+			       (FPW) 0x00800080) {
+				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+					printf("Timeout\n");
+					*addr = (FPW) 0x00B000B0;	/* suspend erase         */
+					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
+					rcode = 1;
+					break;
+				}
+			}
+
+			*addr = (FPW) 0x00500050;	/* clear status register cmd.   */
+			*addr = (FPW) 0x00FF00FF;	/* resest to read mode          */
+
+			printf(" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int
+write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data(info, wp, SWAP(data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_data(flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf("not erased at %08lX (%lX)\n", (ulong) addr, *addr);
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (0);
+}
+
+void inline
+spin_wheel(void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}

board/gcplus/gcplus.c

@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * 2003-2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int
+board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_arch_number = 29;	/* ADS GraphicsClientPlus Board */
+
+	gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
+
+	/* Most of the ADS GCPlus I/O is connected to Static nCS2.
+	 * So I'm brute forcing nCS2 timiming here for worst case.
+	 */
+	MSC1 &= ~0xFFFF;
+	MSC1 |= 0x8649;
+
+	/* Nothing is connected to Static nCS4 or nCS5. But I'm using
+	 * nCS4 as a paranoia safe guard to force nCS2, nOE; nWE high
+	 * after accessing I/O via (non-VLIO) nCS2. What can I say, I'm
+	 * paranoid and lack decent tools to alleviate my fear. I sure
+	 * do wish I had a logic analyzer. : (
+	 */
+
+	MSC2 =  0xfff9fff9;
+
+	return 0;
+}
+
+int
+dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+
+	return (0);
+}

board/gcplus/memsetup.S

@@ -0,0 +1,77 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ * 2003-2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include "config.h"
+#include "version.h"
+
+
+	.globl	memsetup
+memsetup:
+	/* The ADS GC+ for Linux Boot Rom Ver. 1.73 does memory init for us.
+	 * However the darn thing leaves the MMU enabled before handing control
+	 * over to us. So we need to disable the MMU and we use memsetup
+	 * to do it.
+	 */
+
+@ The following code segment was borrowed with gratitude from:
+@	linux-2.4.19-rmk7/arch/arm/boot/compressed/head-sa1100.S
+
+	@ Data cache might be active.
+	@ Be sure to flush kernel binary out of the cache,
+	@ whatever state it is, before it is turned off.
+	@ This is done by fetching through currently executed
+	@ memory to be sure we hit the same cache.
+	bic	r2, pc, #0x1f
+	add	r3, r2, #0x4000		@ 16 kb is quite enough...
+1:	ldr	r0, [r2], #32
+	teq	r2, r3
+	bne	1b
+	mcr	p15, 0, r0, c7, c10, 4	@ drain WB
+	mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
+
+	@ disabling MMU and caches
+	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+	bic	r0, r0, #0x0d		@ clear WB, DC, MMU
+	bic	r0, r0, #0x1000		@ clear Icache
+	mcr	p15, 0, r0, c1, c0, 0
+
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	b	2f
+2:
+	nop
+	nop
+	nop
+	nop
+	nop
+
+
+	mov	pc, lr

board/gcplus/u-boot.lds

@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * 2003 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+		cpu/sa1100/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}

board/icecube/icecube.c

@@ -2,6 +2,9 @@
  * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -25,90 +28,84 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
+#if defined(CONFIG_MPC5200_DDR)
+#include "mt46v16m16-75.h"
+#else
+#include "mt48lc16m16a2-75.h"
+#endif
+
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
 
-#ifdef CONFIG_MPC5200_DDR
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f00 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+#if SDRAM_DDR
 	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x40090000;
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	__asm__ volatile ("sync");
+
 	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x058d0000;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f02 | hi_addr_bit;
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xf05f0f04 | hi_addr_bit;
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x018d0000;
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x705f0f00 | hi_addr_bit;
-#else
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
-	/* set mode register */
-#if defined(CONFIG_MPC5200)
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000;
-#elif defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	__asm__ volatile ("sync");
 #endif
+
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
 	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	__asm__ volatile ("sync");
+
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
-#endif
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	__asm__ volatile ("sync");
 }
 #endif
 
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            is something else than 0x00000000.
+ */
+
+#if defined(CONFIG_MPC5200)
 long int initdram (int board_type)
 {
 	ulong dramsize = 0;
-#ifdef CONFIG_MPC5200_DDR
 	ulong dramsize2 = 0;
-#endif
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
 
-	/* configure SDRAM start/end */
-#if defined(CONFIG_MPC5200)
+	/* setup SDRAM chip selects */
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+	__asm__ volatile ("sync");
 
-#ifdef CONFIG_MPC5200_DDR
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0x73722930;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x47770000;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	__asm__ volatile ("sync");
 
-	/* set tap delay to 0x10 */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = 0x10000000;
-#else
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+#if SDRAM_DDR
+	/* set tap delay */
+	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	__asm__ volatile ("sync");
 #endif
 
-#elif defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
-
-	/* address select register */
-	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
-#endif
+	/* find RAM size using SDRAM CS0 only */
 	sdram_start(0);
 	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
 	sdram_start(1);
@@ -119,11 +116,23 @@ long int initdram (int board_type)
 	} else {
 		dramsize = test2;
 	}
-#if defined(CONFIG_MPC5200)
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG =
-		(0x13 + __builtin_ffs(dramsize >> 20) - 1);
-#ifdef CONFIG_MPC5200_DDR
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20)) {
+		dramsize = 0;
+	}
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+	} else {
+		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+	}
+
+	/* let SDRAM CS1 start right after CS0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+	/* find RAM size using SDRAM CS1 only */
 	sdram_start(0);
 	test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
 	sdram_start(1);
@@ -134,34 +143,94 @@ long int initdram (int board_type)
 	} else {
 		dramsize2 = test2;
 	}
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG =
-		dramsize + (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-#else
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#endif
-#elif defined(CONFIG_MGT5100)
-	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-#endif
 
-#else	/* CFG_RAMBOOT */
-#ifdef CONFIG_MGT5100
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
-	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-#else
-	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
-#ifdef CONFIG_MPC5200_DDR
-	dramsize2 = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20);
-#endif
-#endif
+	/* memory smaller than 1MB is impossible */
+	if (dramsize2 < (1 << 20)) {
+		dramsize2 = 0;
+	}
+
+	/* set SDRAM CS1 size according to the amount of RAM found */
+	if (dramsize2 > 0) {
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+	} else {
+		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+	}
+
+#else /* CFG_RAMBOOT */
+
+	/* retrieve size of memory connected to SDRAM CS0 */
+	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	if (dramsize >= 0x13) {
+		dramsize = (1 << (dramsize - 0x13)) << 20;
+	} else {
+		dramsize = 0;
+	}
+
+	/* retrieve size of memory connected to SDRAM CS1 */
+	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	if (dramsize2 >= 0x13) {
+		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+	} else {
+		dramsize2 = 0;
+	}
+
+#endif /* CFG_RAMBOOT */
+
+	return dramsize + dramsize2;
+}
+
+#elif defined(CONFIG_MGT5100)
+
+long int initdram (int board_type)
+{
+	ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
+	/* setup and enable SDRAM chip selects */
+	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
+	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+	__asm__ volatile ("sync");
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+	/* address select register */
+	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
+	__asm__ volatile ("sync");
+
+	/* find RAM size */
+	sdram_start(0);
+	test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+
+	/* set SDRAM end address according to size */
+	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+
+#else /* CFG_RAMBOOT */
+
+	/* Retrieve amount of SDRAM available */
+	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
+
 #endif /* CFG_RAMBOOT */
 
-#ifdef CONFIG_MPC5200_DDR
-	dramsize += dramsize2;
-#endif
-	/* return total ram size */
 	return dramsize;
 }
 
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
+
 int checkboard (void)
 {
 #if defined(CONFIG_MPC5200)
@@ -207,3 +276,28 @@ void pci_init_board(void)
 	pci_mpc5xxx_init(&hose);
 }
 #endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+#define GPIO_PSC1_4	0x01000000UL
+
+void init_ide_reset (void)
+{
+	debug ("init_ide_reset\n");
+
+    	/* Configure PSC1_4 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+}
+
+void ide_set_reset (int idereset)
+{
+	debug ("ide_reset(%d)\n", idereset);
+
+	if (idereset) {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+	} else {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+	}
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */

board/icecube/mt46v16m16-75.h

@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR	1		/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x018D0000
+#define SDRAM_EMODE	0x40090000
+#define SDRAM_CONTROL	0x705f0f00
+#define SDRAM_CONFIG1	0x73722930
+#define SDRAM_CONFIG2	0x47770000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif

board/icecube/mt48lc16m16a2-75.h

@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR	0		/* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x00CD0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xD2322800
+#define SDRAM_CONFIG2	0x8AD70000
+
+#elif defined(CONFIG_MGT5100)
+/* Settings for XLB = 66 MHz */
+#define SDRAM_MODE	0x008D0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xC2222600
+#define SDRAM_CONFIG2	0x88B70004
+#define SDRAM_ADDRSEL	0x02000000
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif

board/integratorap/Makefile

@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004
+# ARM Ltd.
+# Philippe Robin, <philippe.robin@arm.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= integratorap.o flash.o
+SOBJS	:= platform.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/integratorap/config.mk

@@ -0,0 +1,5 @@
+#
+# image should be loaded at 0x01000000
+#
+
+TEXT_BASE = 0x01000000

board/integratorap/flash.c

@@ -0,0 +1,473 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)			__swab16(x)
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)			__swab32(x)
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+	unsigned int sector_number;
+	unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+	{4, 32 * 1024},				/* 4 * 32kBytes sectors */
+	{255, 128 * 1024},			/* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	int i;
+	ulong size = 0;
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		default:
+			panic ("configured too many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+	OrgDef *pOrgDef;
+
+	pOrgDef = OrgIntel_28F256L18T;
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			if (i > 255) {
+				info->start[i] = base + (i * 0x8000);
+				info->protect[i] = 0;
+			} else {
+				info->start[i] = base +
+						(i * PHYS_FLASH_SECT_SIZE);
+				info->protect[i] = 0;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F256L18T:
+		printf ("FLASH 28F256L18T\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0];
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);		/* no or unknown flash  */
+	}
+
+	mb ();
+	value = addr[1];	/* device ID        */
+	switch (value) {
+
+	case (FPW) (INTEL_ID_28F256L18T):
+		info->flash_id += FLASH_28F256L18T;
+		info->sector_count = 259;
+		info->size = 0x02000000;
+		break;			/* => 32 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+				info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (info->size);
+}
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK    0x0080
+
+	*addr = (FPW) 0x00500050;	/* clear status register */
+
+	/* this sends the clear lock bit command */
+	*addr = (FPW) 0x00600060;
+	*addr = (FPW) 0x00D000D0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+				info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+				prot);
+	} else {
+		printf ("\n");
+	}
+
+
+	start = get_timer (0);
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			flash_unprotect_sectors (addr);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;/* clear status register */
+			*addr = (FPW) 0x00200020;/* erase setup */
+			*addr = (FPW) 0x00D000D0;/* erase confirm */
+
+			while (((status =
+				*addr) & (FPW) 0x00800080) !=
+				(FPW) 0x00800080) {
+					if (get_timer_masked () >
+					CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					/* suspend erase     */
+					*addr = (FPW) 0x00B000B0;
+					/* reset to read mode */
+					*addr = (FPW) 0x00FF00FF;
+					rcode = 1;
+					break;
+				}
+			}
+
+			/* clear status register cmd.   */
+			*addr = (FPW) 0x00500050;
+			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
+			printf (" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+		return (2);
+	}
+	flash_unprotect_sectors (addr);
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+	return (0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}

board/integratorap/integratorap.c

@@ -0,0 +1,477 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_PCI
+#   include <pci.h>
+#endif
+
+void flash__init (void);
+void ether__init (void);
+void peripheral_power_enable (void);
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+    printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+		"subs %0, %1, #1\n"
+		"bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* arch number of Integrator Board */
+	gd->bd->bi_arch_number = 21;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x00000100;
+
+	icache_enable ();
+
+	flash__init ();
+	return 0;
+}
+
+
+int misc_init_r (void)
+{
+#ifdef CONFIG_PCI
+	pci_init();
+#endif
+	setenv("verify", "n");
+	return (0);
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+#ifdef CONFIG_PCI
+
+#ifndef CONFIG_PCI_PNP
+
+static struct pci_config_table pci_integrator_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ }
+};
+#endif
+
+/* V3 access routines */
+#define _V3Write16(o,v) (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned short)(v))
+#define _V3Read16(o)    (*(volatile unsigned short *)(PCI_V3_BASE + (unsigned int)(o)))
+
+#define _V3Write32(o,v) (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)) = (unsigned int)(v))
+#define _V3Read32(o)    (*(volatile unsigned int *)(PCI_V3_BASE + (unsigned int)(o)))
+
+/* Compute address necessary to access PCI config space for the given */
+/* bus and device. */
+#define PCI_CONFIG_ADDRESS( __bus, __devfn, __offset ) ({				\
+	unsigned int __address, __devicebit;						\
+	unsigned short __mapaddress;							\
+	unsigned int __dev = PCI_DEV (__devfn);	/* FIXME to check!! (slot?) */		\
+											\
+	if (__bus == 0) {								\
+		/* local bus segment so need a type 0 config cycle */			\
+		/* build the PCI configuration "address" with one-hot in A31-A11 */	\
+		__address = PCI_CONFIG_BASE;						\
+		__address |= ((__devfn & 0x07) << 8);					\
+		__address |= __offset & 0xFF;						\
+		__mapaddress = 0x000A;	/* 101=>config cycle, 0=>A1=A0=0 */		\
+		__devicebit = (1 << (__dev + 11));					\
+											\
+		if ((__devicebit & 0xFF000000) != 0) {					\
+			/* high order bits are handled by the MAP register */		\
+			__mapaddress |= (__devicebit >> 16);				\
+		} else {								\
+			/* low order bits handled directly in the address */		\
+			__address |= __devicebit;					\
+		}									\
+	} else {		/* bus !=0 */						\
+		/* not the local bus segment so need a type 1 config cycle */		\
+		/* A31-A24 are don't care (so clear to 0) */				\
+		__mapaddress = 0x000B;	/* 101=>config cycle, 1=>A1&A0 from PCI_CFG */	\
+		__address = PCI_CONFIG_BASE;						\
+		__address |= ((__bus & 0xFF) << 16);	/* bits 23..16 = bus number     */  \
+		__address |= ((__dev & 0x1F) << 11);	/* bits 15..11 = device number  */  \
+		__address |= ((__devfn & 0x07) << 8);	/* bits 10..8  = function number */ \
+		__address |= __offset & 0xFF;	/* bits  7..0  = register number */	\
+	}										\
+	_V3Write16 (V3_LB_MAP1, __mapaddress);						\
+	__address;									\
+})
+
+/* _V3OpenConfigWindow - open V3 configuration window */
+#define _V3OpenConfigWindow() {								\
+	/* Set up base0 to see all 512Mbytes of memory space (not	     */		\
+	/* prefetchable), this frees up base1 for re-use by configuration*/		\
+	/* memory */									\
+											\
+	_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) |			\
+				     0x90 | V3_LB_BASE_M_ENABLE));			\
+	/* Set up base1 to point into configuration space, note that MAP1 */		\
+	/* register is set up by pciMakeConfigAddress(). */				\
+											\
+	_V3Write32 (V3_LB_BASE1, ((CPU_PCI_CNFG_ADRS & 0xFFF00000) |			\
+				     0x40 | V3_LB_BASE_M_ENABLE));			\
+}
+
+/* _V3CloseConfigWindow - close V3 configuration window */
+#define _V3CloseConfigWindow() {							\
+    /* Reassign base1 for use by prefetchable PCI memory */				\
+	_V3Write32 (V3_LB_BASE1, (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000)	\
+					| 0x84 | V3_LB_BASE_M_ENABLE));			\
+	_V3Write16 (V3_LB_MAP1,								\
+	    (((INTEGRATOR_PCI_BASE + 0x10000000) & 0xFFF00000) >> 16) | 0x0006);	\
+											\
+	/* And shrink base0 back to a 256M window (NOTE: MAP0 already correct) */	\
+											\
+	_V3Write32 (V3_LB_BASE0, ((INTEGRATOR_PCI_BASE & 0xFFF00000) |			\
+			     0x80 | V3_LB_BASE_M_ENABLE));				\
+}
+
+static int pci_integrator_read_byte (struct pci_controller *hose, pci_dev_t dev,
+				     int offset, unsigned char *val)
+{
+	_V3OpenConfigWindow ();
+	*val = *(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							       PCI_FUNC (dev),
+							       offset);
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_read__word (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned short *val)
+{
+	_V3OpenConfigWindow ();
+	*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+								PCI_FUNC (dev),
+								offset);
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_read_dword (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned int *val)
+{
+	_V3OpenConfigWindow ();
+	*val = *(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+								PCI_FUNC (dev),
+								offset);
+	*val |= (*(volatile unsigned int *)
+		 PCI_CONFIG_ADDRESS (PCI_BUS (dev), PCI_FUNC (dev),
+				     (offset + 2))) << 16;
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_write_byte (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned char val)
+{
+	_V3OpenConfigWindow ();
+	*(volatile unsigned char *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							PCI_FUNC (dev),
+							offset) = val;
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_write_word (struct pci_controller *hose,
+				      pci_dev_t dev, int offset,
+				      unsigned short val)
+{
+	_V3OpenConfigWindow ();
+	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							 PCI_FUNC (dev),
+							 offset) = val;
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+
+static int pci_integrator_write_dword (struct pci_controller *hose,
+				       pci_dev_t dev, int offset,
+				       unsigned int val)
+{
+	_V3OpenConfigWindow ();
+	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							 PCI_FUNC (dev),
+							 offset) = (val & 0xFFFF);
+	*(volatile unsigned short *) PCI_CONFIG_ADDRESS (PCI_BUS (dev),
+							 PCI_FUNC (dev),
+							 (offset + 2)) = ((val >> 16) & 0xFFFF);
+	_V3CloseConfigWindow ();
+
+	return 0;
+}
+/******************************
+ * PCI initialisation
+ ******************************/
+
+struct pci_controller integrator_hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_integrator_config_table,
+#endif
+};
+
+void pci_init_board (void)
+{
+	volatile int i, j;
+	struct pci_controller *hose = &integrator_hose;
+
+	/* setting this register will take the V3 out of reset */
+
+	*(volatile unsigned int *) (INTEGRATOR_SC_PCIENABLE) = 1;
+
+	/* wait a few usecs to settle the device and the PCI bus */
+
+	for (i = 0; i < 100; i++)
+		j = i + 1;
+
+	/* Now write the Base I/O Address Word to V3_BASE + 0x6C */
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_IO_BASE) =
+		(unsigned short) (V3_BASE >> 16);
+
+	do {
+		*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) = 0xAA;
+		*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA + 4) =
+			0x55;
+	} while (*(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA) != 0xAA
+		 || *(volatile unsigned char *) (V3_BASE + V3_MAIL_DATA +
+						 4) != 0x55);
+
+	/* Make sure that V3 register access is not locked, if it is, unlock it */
+
+	if ((*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &
+	     V3_SYSTEM_M_LOCK)
+	    == V3_SYSTEM_M_LOCK)
+		*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) = 0xA05F;
+
+	/* Ensure that the slave accesses from PCI are disabled while we */
+	/* setup windows */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) &=
+		~(V3_COMMAND_M_MEM_EN | V3_COMMAND_M_IO_EN);
+
+	/* Clear RST_OUT to 0; keep the PCI bus in reset until we've finished */
+
+	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) &=
+		~V3_SYSTEM_M_RST_OUT;
+
+	/* Make all accesses from PCI space retry until we're ready for them */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) |=
+		V3_PCI_CFG_M_RETRY_EN;
+
+	/* Set up any V3 PCI Configuration Registers that we absolutely have to */
+	/* LB_CFG controls Local Bus protocol. */
+	/* Enable LocalBus byte strobes for READ accesses too. */
+	/* set bit 7 BE_IMODE and bit 6 BE_OMODE */
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_CFG) |= 0x0C0;
+
+	/* PCI_CMD controls overall PCI operation. */
+	/* Enable PCI bus master. */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) |= 0x04;
+
+	/* PCI_MAP0 controls where the PCI to CPU memory window is on Local Bus */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP0) =
+		(INTEGRATOR_BOOT_ROM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_512M |
+					      V3_PCI_MAP_M_REG_EN |
+					      V3_PCI_MAP_M_ENABLE);
+
+	/* PCI_BASE0 is the PCI address of the start of the window */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE0) =
+		INTEGRATOR_BOOT_ROM_BASE;
+
+	/* PCI_MAP1 is LOCAL address of the start of the window */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_MAP1) =
+		(INTEGRATOR_HDR0_SDRAM_BASE) | (V3_PCI_MAP_M_ADR_SIZE_1024M |
+						V3_PCI_MAP_M_REG_EN |
+						V3_PCI_MAP_M_ENABLE);
+
+	/* PCI_BASE1 is the PCI address of the start of the window */
+
+	*(volatile unsigned int *) (V3_BASE + V3_PCI_BASE1) =
+		INTEGRATOR_HDR0_SDRAM_BASE;
+
+	/* Set up the windows from local bus memory into PCI configuration, */
+	/* I/O and Memory. */
+	/* PCI I/O, LB_BASE2 and LB_MAP2 are used exclusively for this. */
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_BASE2) =
+		((CPU_PCI_IO_ADRS >> 24) << 8) | V3_LB_BASE_M_ENABLE;
+	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP2) = 0;
+
+	/* PCI Configuration, use LB_BASE1/LB_MAP1. */
+
+	/* PCI Memory use LB_BASE0/LB_MAP0 and LB_BASE1/LB_MAP1 */
+	/* Map first 256Mbytes as non-prefetchable via BASE0/MAP0 */
+	/* (INTEGRATOR_PCI_BASE == PCI_MEM_BASE) */
+
+	*(volatile unsigned int *) (V3_BASE + V3_LB_BASE0) =
+		INTEGRATOR_PCI_BASE | (0x80 | V3_LB_BASE_M_ENABLE);
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP0) =
+		((INTEGRATOR_PCI_BASE >> 20) << 0x4) | 0x0006;
+
+	/* Map second 256 Mbytes as prefetchable via BASE1/MAP1 */
+
+	*(volatile unsigned int *) (V3_BASE + V3_LB_BASE1) =
+		INTEGRATOR_PCI_BASE | (0x84 | V3_LB_BASE_M_ENABLE);
+
+	*(volatile unsigned short *) (V3_BASE + V3_LB_MAP1) =
+		(((INTEGRATOR_PCI_BASE + 0x10000000) >> 20) << 4) | 0x0006;
+
+	/* Allow accesses to PCI Configuration space */
+	/* and set up A1, A0 for type 1 config cycles */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG) =
+		((*(volatile unsigned short *) (V3_BASE + V3_PCI_CFG)) &
+		 ~(V3_PCI_CFG_M_RETRY_EN | V3_PCI_CFG_M_AD_LOW1)) |
+		V3_PCI_CFG_M_AD_LOW0;
+
+	/* now we can allow in PCI MEMORY accesses */
+
+	*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD) =
+		(*(volatile unsigned short *) (V3_BASE + V3_PCI_CMD)) |
+		V3_COMMAND_M_MEM_EN;
+
+	/* Set RST_OUT to take the PCI bus is out of reset, PCI devices can */
+	/* initialise and lock the V3 system register so that no one else */
+	/* can play with it */
+
+	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
+		(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
+		V3_SYSTEM_M_RST_OUT;
+
+	*(volatile unsigned short *) (V3_BASE + V3_SYSTEM) =
+		(*(volatile unsigned short *) (V3_BASE + V3_SYSTEM)) |
+		V3_SYSTEM_M_LOCK;
+
+	/*
+	 * Register the hose
+	 */
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	/* System memory space */
+	pci_set_region (hose->regions + 0,
+			0x00000000, 0x40000000, 0x01000000,
+			PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	/* PCI Memory - config space */
+	pci_set_region (hose->regions + 1,
+			0x00000000, 0x62000000, 0x01000000, PCI_REGION_MEM);
+
+	/* PCI V3 regs */
+	pci_set_region (hose->regions + 2,
+			0x00000000, 0x61000000, 0x00080000, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (hose->regions + 3,
+			0x00000000, 0x60000000, 0x00010000, PCI_REGION_IO);
+
+	pci_set_ops (hose,
+		     pci_integrator_read_byte,
+		     pci_integrator_read__word,
+		     pci_integrator_read_dword,
+		     pci_integrator_write_byte,
+		     pci_integrator_write_word, pci_integrator_write_dword);
+
+	hose->region_count = 4;
+
+	pci_register_hose (hose);
+
+	pciauto_config_init (hose);
+	pciauto_config_device (hose, 0);
+
+	hose->last_busno = pci_hose_scan (hose);
+}
+#endif
+
+/******************************
+ Routine:
+ Description:
+******************************/
+void flash__init (void)
+{
+}
+/*************************************************************
+ Routine:ether__init
+ Description: take the Ethernet controller out of reset and wait
+	  		   for the EEPROM load to complete.
+*************************************************************/
+void ether__init (void)
+{
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+int dram_init (void)
+{
+	return 0;
+}

board/integratorap/platform.S

@@ -0,0 +1,33 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004, ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+.globl platformsetup
+platformsetup:
+
+	/* All done by Integrator's boot monitor! */
+	mov pc, lr

board/integratorap/u-boot.lds

@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+	. = ALIGN(4);
+	.text	:
+	{
+	  cpu/arm926ejs/start.o	(.text)
+	  *(.text)
+	}
+	.rodata : { *(.rodata) }
+	. = ALIGN(4);
+	.data : { *(.data) }
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}

board/integratorcp/Makefile

@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= integratorcp.o flash.o
+SOBJS	:= platform.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/integratorcp/config.mk

@@ -0,0 +1,5 @@
+#
+# image should be loaded at 0x01000000
+#
+
+TEXT_BASE = 0x01000000

board/integratorcp/flash.c

@@ -0,0 +1,473 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)			__swab16(x)
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)			__swab32(x)
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+	unsigned int sector_number;
+	unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+	{4, 32 * 1024},				/* 4 * 32kBytes sectors */
+	{255, 128 * 1024},			/* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	int i;
+	ulong size = 0;
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		default:
+			panic ("configured too many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+	OrgDef *pOrgDef;
+
+	pOrgDef = OrgIntel_28F256L18T;
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			if (i > 255) {
+				info->start[i] = base + (i * 0x8000);
+				info->protect[i] = 0;
+			} else {
+				info->start[i] = base +
+						(i * PHYS_FLASH_SECT_SIZE);
+				info->protect[i] = 0;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F256L18T:
+		printf ("FLASH 28F256L18T\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0];
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);		/* no or unknown flash  */
+	}
+
+	mb ();
+	value = addr[1];	/* device ID        */
+	switch (value) {
+
+	case (FPW) (INTEL_ID_28F256L18T):
+		info->flash_id += FLASH_28F256L18T;
+		info->sector_count = 259;
+		info->size = 0x02000000;
+		break;			/* => 32 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+				info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (info->size);
+}
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK    0x0080
+
+	*addr = (FPW) 0x00500050;	/* clear status register */
+
+	/* this sends the clear lock bit command */
+	*addr = (FPW) 0x00600060;
+	*addr = (FPW) 0x00D000D0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+				info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+				prot);
+	} else {
+		printf ("\n");
+	}
+
+
+	start = get_timer (0);
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			flash_unprotect_sectors (addr);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;/* clear status register */
+			*addr = (FPW) 0x00200020;/* erase setup */
+			*addr = (FPW) 0x00D000D0;/* erase confirm */
+
+			while (((status =
+				*addr) & (FPW) 0x00800080) !=
+				(FPW) 0x00800080) {
+					if (get_timer_masked () >
+					CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					/* suspend erase     */
+					*addr = (FPW) 0x00B000B0;
+					/* reset to read mode */
+					*addr = (FPW) 0x00FF00FF;
+					rcode = 1;
+					break;
+				}
+			}
+
+			/* clear status register cmd.   */
+			*addr = (FPW) 0x00500050;
+			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
+			printf (" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+		return (2);
+	}
+	flash_unprotect_sectors (addr);
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+	return (0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}

board/integratorcp/integratorcp.c

@@ -0,0 +1,109 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void flash__init (void);
+void ether__init (void);
+void peripheral_power_enable (void);
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+    printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+		"subs %0, %1, #1\n"
+		"bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* arch number of Integrator Board */
+	gd->bd->bi_arch_number = 275;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x00000100;
+
+	icache_enable ();
+
+	flash__init ();
+	ether__init ();
+	return 0;
+}
+
+
+int misc_init_r (void)
+{
+	setenv("verify", "n");
+	return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+void flash__init (void)
+{
+}
+/*************************************************************
+ Routine:ether__init
+ Description: take the Ethernet controller out of reset and wait
+	  		   for the EEPROM load to complete.
+*************************************************************/
+void ether__init (void)
+{
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+int dram_init (void)
+{
+	return 0;
+}

board/integratorcp/platform.S

@@ -0,0 +1,33 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003, ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+.globl platformsetup
+platformsetup:
+
+	/* All done by IntegratorCP's boot monitor! */
+	mov pc, lr

board/integratorcp/u-boot.lds

@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+	. = ALIGN(4);
+	.text	:
+	{
+	  cpu/arm926ejs/start.o	(.text)
+	  *(.text)
+	}
+	.rodata : { *(.rodata) }
+	. = ALIGN(4);
+	.data : { *(.data) }
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}

board/jse/Makefile

@@ -0,0 +1,44 @@
+#
+# Copyright 2004 Picture Elements, Inc.
+# Stephen Williams <steve@icarus.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o sdram.o flash.o host_bridge.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/jse/README.txt

@@ -0,0 +1,48 @@
+JSE Configuration Details
+
+Memory Bank 0 -- Flash chip
+---------------------------
+
+0xfff00000 - 0xffffffff
+
+The flash chip is really only 512Kbytes, but the high address bit of
+the 1Meg region is ignored, so the flash is replicated through the
+region. Thus, this is consistent with a flash base address 0xfff80000.
+
+The placement at the end is to be consistent with reset behavior,
+where the processor itself initially uses this bus to load the branch
+vector and start running.
+
+On-Chip Memory
+--------------
+
+0xf4000000 - 0xf4000fff
+
+The 405GPr includes a 4K on-chip memory that can be placed however
+software chooses. I choose to place the memory at this address, to
+keep it out of the cachable areas.
+
+
+Memory Bank 1 -- SystemACE Controller
+-------------------------------------
+
+0xf0000000 - 0xf00fffff
+
+The SystemACE chip is along on peripheral bank CS#1. We don't need
+much space, but 1Meg is the smallest we can configure the chip to
+allocate. We need it far away from the flash region, because this
+region is set to be non-cached.
+
+
+Internal Peripherals
+--------------------
+
+0xef600300 - 0xef6008ff
+
+These are scattered various peripherals internal to the PPC405GPr
+chip.
+
+SDRAM
+-----
+
+0x00000000 - 0x07ffffff  (128 MBytes)

board/jse/config.mk

@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2003 Picture Elements, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Picture Elements, Inc. JSE boards
+#
+
+TEXT_BASE = 0xFFF80000

board/jse/flash.c

@@ -0,0 +1,671 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#if CFG_MAX_FLASH_BANKS != 1
+#error "CFG_MAX_FLASH_BANKS must be 1"
+#endif
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static int write_word (flash_info_t * info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+#define ADDR0           0x5555
+#define ADDR1           0x2aaa
+#define FLASH_WORD_SIZE unsigned char
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	unsigned long base_b0;
+
+	/* Init: no FLASHes known */
+	flash_info[0].flash_id = FLASH_UNKNOWN;
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 =
+		flash_get_size ((vu_long *) FLASH_BASE0_PRELIM,
+				&flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size_b0, size_b0 << 20);
+	}
+
+	/* Only one bank */
+	/* Setup offsets */
+	flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	/* Monitor protection ON by default */
+	(void) flash_protect (FLAG_PROTECT_SET,
+			      FLASH_BASE0_PRELIM,
+			      FLASH_BASE0_PRELIM + monitor_flash_len - 1,
+			      &flash_info[0]);
+	flash_info[0].size = size_b0;
+
+	return size_b0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id == FLASH_AM040)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+					base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("FUJITSU ");
+		break;
+	case FLASH_MAN_SST:
+		printf ("SST ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM040:
+		printf ("AM29F040 (512 Kbit, uniform sector size)\n");
+		break;
+	case FLASH_AM400B:
+		printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM400T:
+		printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM800T:
+		printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM160B:
+		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM160T:
+		printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+		break;
+	case FLASH_AM320B:
+		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	case FLASH_SST800A:
+		printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+		break;
+	case FLASH_SST160A:
+		printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *) info->start[i];
+		size = size >> 2;	/* divide by 4 for longword access */
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+#if 0				/* test-only */
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     "
+#else
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ", info->protect[i] ? "RO " : "   "
+#endif
+			);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info)
+{
+	short i;
+	FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[2];
+#else
+	value = addr2[0];
+#endif
+
+	switch (value) {
+	case (FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (FLASH_WORD_SIZE) FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (FLASH_WORD_SIZE) SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash  */
+	}
+
+#ifdef CONFIG_ADCIOP
+	value = addr2[0];	/* device ID            */
+	/*        printf("\ndev_code=%x\n", value); */
+#else
+	value = addr2[1];	/* device ID            */
+#endif
+
+	switch (value) {
+	case (FLASH_WORD_SIZE) AMD_ID_F040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+	case (FLASH_WORD_SIZE) AMD_ID_LV040B:
+		info->flash_id += FLASH_AM040;
+		info->sector_count = 8;
+		info->size = 0x0080000;	/* => 512 ko */
+		break;
+	case (FLASH_WORD_SIZE) AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (FLASH_WORD_SIZE) AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (FLASH_WORD_SIZE) AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (FLASH_WORD_SIZE) AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (FLASH_WORD_SIZE) AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (FLASH_WORD_SIZE) AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+#if 0				/* enable when device IDs are available */
+	case (FLASH_WORD_SIZE) AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 67;
+		info->size = 0x00400000;
+		break;		/* => 4 MB              */
+
+	case (FLASH_WORD_SIZE) AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 67;
+		info->size = 0x00400000;
+		break;		/* => 4 MB              */
+#endif
+	case (FLASH_WORD_SIZE) SST_ID_xF800A:
+		info->flash_id += FLASH_SST800A;
+		info->sector_count = 16;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (FLASH_WORD_SIZE) SST_ID_xF160A:
+		info->flash_id += FLASH_SST160A;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id == FLASH_AM040)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+					base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+#ifdef CONFIG_ADCIOP
+		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
+		info->protect[i] = addr2[4] & 1;
+#else
+		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+#endif
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+#if 0				/* test-only */
+#ifdef CONFIG_ADCIOP
+		addr2 = (volatile unsigned char *) info->start[0];
+		addr2[ADDR0] = 0xAA;
+		addr2[ADDR1] = 0x55;
+		addr2[ADDR0] = 0xF0;	/* reset bank */
+#else
+		addr2 = (FLASH_WORD_SIZE *) info->start[0];
+		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+#endif
+#else  /* test-only */
+		addr2 = (FLASH_WORD_SIZE *) info->start[0];
+		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+#endif /* test-only */
+	}
+
+	return (info->size);
+}
+
+int wait_for_DQ7 (flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr =
+		(FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer (0);
+	last = start;
+	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
+	       (FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+			printf ("Erasing sector %p\n", addr2);	/* CLH */
+
+			if ((info->flash_id & FLASH_VENDMASK) ==
+			    FLASH_MAN_SST) {
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay (1000);	/* wait 1 ms */
+			} else {
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7 (info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+#if 0
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+	wait_for_DQ7 (info, l_sect);
+
+      DONE:
+#endif
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word (info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE *addr2 =
+		(FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *) dest) &
+	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts ();
+
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts ();
+
+		/* data polling for D7 */
+		start = get_timer (0);
+		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}

board/jse/host_bridge.c

@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ *    Stephen Williams (steve@icarus.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+#ident "$Id:$"
+
+# include  <common.h>
+# include  <pci.h>
+# include  "jse_priv.h"
+
+/*
+ * The JSE board has an Intel 21555 non-transparent bridge for
+ * communication with the host. We need to render it harmless on the
+ * JSE side, but leave it alone on the host (primary) side. Normally,
+ * this will all be done before the host BIOS can gain access to the
+ * board, due to the Primary Access Lockout bit.
+ *
+ * The host_bridge_init function is called as a late initialization
+ * function, after most of the board is set up, including a PCI scan.
+ */
+
+void host_bridge_init (void)
+{
+	/* The bridge chip is at a fixed location. */
+	pci_dev_t dev = PCI_BDF (0, 10, 0);
+
+	int rc;
+	u32 val32;
+
+	rc = pci_read_config_dword (dev, 0, &val32);
+
+	/* Set subsystem ID --
+	   The primary side sees this value at 0x2c. We set it here so
+	   that the host can tell what sort of device this is:
+	   We are a Picture Elements [0x12c5] JSE [0x008a]. */
+	pci_write_config_dword (dev, 0x6c, 0x008a12c5);
+
+	/* Downstream (Primary-to-Secondary) BARs are set up mostly
+	   off. We need only the Memory-0 Bar so that the host can get
+	   at the CSR region to set up tables and the lot. */
+
+	/* Downstream Memory 0 setup (4K for CSR) */
+	pci_write_config_dword (dev, 0xac, 0xfffff000);
+	/* Downstream Memory 1 setup (off) */
+	pci_write_config_dword (dev, 0xb0, 0x00000000);
+	/* Downstream Memory 2 setup (off) */
+	pci_write_config_dword (dev, 0xb4, 0x00000000);
+	/* Downstream Memory 3 setup (off) */
+	pci_write_config_dword (dev, 0xb8, 0x00000000);
+
+	/* Upstream (Secondary-to-Primary) BARs are used to get at
+	   host memory from the JSE card. Create two regions: a small
+	   one to manage individual word reads/writes, and a larger
+	   one for doing bulk frame moves. */
+
+	/* Upstream Memory 0 Setup -- (BAR2) 4K non-prefetchable */
+	pci_write_config_dword (dev, 0xc4, 0xfffff000);
+	/* Upstream Memory 1 setup -- (BAR3) 4K non-prefetchable */
+	pci_write_config_dword (dev, 0xc8, 0xfffff000);
+
+	/* Upstream Memory 2 (BAR4) uses page translation, and is set
+	   up in CCR1. Configure for 4K pages. */
+
+	/* Set CCR1,0 reigsters. This clears the Primary PCI Lockout
+	   bit as well, so we are done configuring after this
+	   point. Therefore, this must be the last step.
+
+	   CC1[15:12]= 0  (disable I2O message unit)
+	   CC1[11:8] = 0x5 (4K page size)
+	   CC0[11]   = 1  (Secondary Clock Disable: disable clock)
+	   CC0[10]   = 0  (Primary Access Lockout: allow primary access)
+	 */
+	pci_write_config_dword (dev, 0xcc, 0x05000800);
+}

board/jse/init.S

@@ -0,0 +1,105 @@
+/*------------------------------------------------------------------------+ */
+/* */
+/*       This source code has been made available to you by IBM on an AS-IS */
+/*       basis.  Anyone receiving this source is licensed under IBM */
+/*       copyrights to use it in any way he or she deems fit, including */
+/*       copying it, modifying it, compiling it, and redistributing it either */
+/*       with or without modifications.  No license under IBM patents or */
+/*       patent applications is to be implied by the copyright license. */
+/* */
+/*       Any user of this software should understand that IBM cannot provide */
+/*       technical support for this software and will not be responsible for */
+/*       any consequences resulting from the use of this software. */
+/* */
+/*       Any person who transfers this source code or any derivative work */
+/*       must include the IBM copyright notice, this paragraph, and the */
+/*       preceding two paragraphs in the transferred software. */
+/* */
+/*       COPYRIGHT   I B M   CORPORATION 1995 */
+/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------- */
+
+/*------------------------------------------------------------------------- */
+/* Function:     ext_bus_cntlr_init */
+/* Description:  Initializes the External Bus Controller for the external */
+/*		peripherals. IMPORTANT: For pass1 this code must run from */
+/*		cache since you can not reliably change a peripheral banks */
+/*		timing register (pbxap) while running code from that bank. */
+/*		For ex., since we are running from ROM on bank 0, we can NOT */
+/*		execute the code that modifies bank 0 timings from ROM, so */
+/*		we run it from cache. */
+/*                                    */
+/*                                    */
+/* The layout for the PEI JSE board:  */
+/*	Bank 0 - Flash and SRAM       */
+/*	Bank 1 - SystemACE            */
+/*	Bank 2 - not used             */
+/*	Bank 3 - not used             */
+/*	Bank 4 - not used             */
+/*	Bank 5 - not used             */
+/*	Bank 6 - not used             */
+/*	Bank 7 - not used             */
+/*------------------------------------------------------------------------- */
+#include <ppc4xx.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define cpc0_cr0 0xB1
+
+	.globl	ext_bus_cntlr_init
+ext_bus_cntlr_init:
+	mflr    r4                      /* save link register */
+	bl      ..getAddr
+..getAddr:
+	mflr    r3                      /* get address of ..getAddr */
+	mtlr    r4                      /* restore link register */
+	addi    r4,0,14                 /* set ctr to 10; used to prefetch */
+	mtctr   r4                      /* 10 cache lines to fit this function */
+					/* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+	icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+	addi    r3,r3,32		/* move to next cache line */
+	bdnz    ..ebcloop               /* continue for 10 cache lines */
+
+	/*----------------------------------------------------------------- */
+	/* Delay to ensure all accesses to ROM are complete before changing */
+	/* bank 0 timings. 200usec should be enough. */
+	/*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+	/*----------------------------------------------------------------- */
+	addis	r3,0,0x0
+	ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+	mtctr   r3
+..spinlp:
+	bdnz    ..spinlp                /* spin loop */
+
+	/*----------------------------------------------------------------- */
+	/* Memory Bank 0 (Flash) initialization */
+	/*----------------------------------------------------------------- */
+
+	addi    r4,0,pb0ap
+	mtdcr   ebccfga,r4
+	addis   r4,0,0x9B01
+	ori     r4,r4,0x5480
+	mtdcr   ebccfgd,r4
+
+	addi    r4,0,pb0cr
+	mtdcr   ebccfga,r4
+	addis   r4,0,0xFFF1           /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
+	ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
+	mtdcr   ebccfgd,r4
+
+	blr
+
+
+/*----------------------------------------------------------------------- */
+/* Function:     sdram_init                                               */
+/* Description:  This function is called by cpu/ppc4xx/start.S code       */
+/*               to get the SDRAM initialized.                            */
+/*----------------------------------------------------------------------- */
+	.globl  sdram_init
+sdram_init:
+	blr

board/jse/jse.c

@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ *    Stephen Williams (steve@icarus.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+# include  <common.h>
+# include  <ppc4xx.h>
+# include  <asm/processor.h>
+# include  <asm/io.h>
+# include  "jse_priv.h"
+
+/*
+ * This function is run very early, out of flash, and before devices are
+ * initialized. It is called by lib_ppc/board.c:board_init_f by virtue
+ * of being in the init_sequence array.
+ *
+ * The SDRAM has been initialized already -- start.S:start called
+ * init.S:init_sdram early on -- but it is not yet being used for
+ * anything, not even stack. So be careful.
+ */
+int board_early_init_f (void)
+{
+   /*-------------------------------------------------------------------------+
+   | Interrupt controller setup for the JSE board.
+   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+   |       IRQ 16    405GP internally generated; active low; level sensitive
+   |       IRQ 17-24 RESERVED/UNUSED
+   |       IRQ 25 (EXT IRQ 0) PCI SLOT 0; active low; level sensitive
+   |       IRQ 26 (EXT IRQ 1) PCI SLOT 1; active low; level sensitive
+   |       IRQ 27 (EXT IRQ 2) JP2C CHIP ; active low; level sensitive
+   |       IRQ 28 (EXT IRQ 3) PCI bridge; active low; level sensitive
+   |       IRQ 29 (EXT IRQ 4) SystemACE IRQ; active high
+   |       IRQ 30 (EXT IRQ 5) SystemACE BRdy (unused)
+   |       IRQ 31 (EXT IRQ 6) (unused)
+   +-------------------------------------------------------------------------*/
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr (uicer, 0x00000000);	/* disable all ints */
+	mtdcr (uiccr, 0x00000000);	/* set all to be non-critical */
+	mtdcr (uicpr, 0xFFFFFF87);	/* set int polarities */
+	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/* Configure the interface to the SystemACE MCU port.
+	   The SystemACE is fast, but there is no reason to have
+	   excessivly tight timings. So the settings are slightly
+	   generous. */
+
+	/* EBC0_B1AP: BME=1, TWT=2, CSN=0, OEN=1,
+	   WBN=0, WBF=1, TH=0,  RE=0,  SOR=0, BEM=0, PEN=0 */
+	mtdcr (ebccfga, pb1ap);
+	mtdcr (ebccfgd, 0x01011000);
+
+	/* EBC0_B1CR: BAS=x, BS=0(1MB), BU=3(R/W), BW=0(8bits) */
+	mtdcr (ebccfga, pb1cr);
+	mtdcr (ebccfgd, CFG_SYSTEMACE_BASE | 0x00018000);
+
+	/* Enable the /PerWE output as /PerWE, instead of /PCIINT. */
+	/* CPC0_CR1 |= PCIPW */
+	mtdcr (0xb2, mfdcr (0xb2) | 0x00004000);
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_PRE_INIT
+int board_pre_init (void)
+{
+	return board_early_init_f ();
+}
+
+#endif
+
+/*
+ * This function is also called by lib_ppc/board.c:board_init_f (it is
+ * also in the init_sequence array) but later. Many more things are
+ * configured, but we are still running from flash.
+ */
+int checkboard (void)
+{
+	unsigned vers, status;
+
+	/* check that the SystemACE chip is alive. */
+	printf ("ACE:   ");
+	vers = readw (CFG_SYSTEMACE_BASE + 0x16);
+	printf ("SystemACE %u.%u (build %u)",
+		(vers >> 12) & 0x0f, (vers >> 8) & 0x0f, vers & 0xff);
+
+	status = readl (CFG_SYSTEMACE_BASE + 0x04);
+#ifdef DEBUG
+	printf (" STATUS=0x%08x", status);
+#endif
+	/* If the flash card is present and there is an initial error,
+	   then force a restart of the program. */
+	if (status & 0x00000010) {
+		printf (" CFDETECT");
+
+		if (status & 0x04) {
+			/* CONTROLREG = CFGPROG */
+			writew (0x1000, CFG_SYSTEMACE_BASE + 0x18);
+			udelay (500);
+			/* CONTROLREG = CFGRESET */
+			writew (0x0080, CFG_SYSTEMACE_BASE + 0x18);
+			udelay (500);
+			writew (0x0000, CFG_SYSTEMACE_BASE + 0x18);
+			/* CONTROLREG = CFGSTART */
+			writew (0x0020, CFG_SYSTEMACE_BASE + 0x18);
+
+			status = readl (CFG_SYSTEMACE_BASE + 0x04);
+		}
+	}
+
+	/* Wait for the SystemACE to program its chain of devices. */
+	while ((status & 0x84) == 0x00) {
+		udelay (500);
+		status = readl (CFG_SYSTEMACE_BASE + 0x04);
+	}
+
+	if (status & 0x04)
+		printf (" CFG-ERROR");
+	if (status & 0x80)
+		printf (" CFGDONE");
+
+	printf ("\n");
+
+	/* Force /RTS to active. The board it not wired quite
+	   correctly to use cts/rtc flow control, so just force the
+	   /RST active and forget about it. */
+	writeb (readb (0xef600404) | 0x03, 0xef600404);
+
+	printf ("JSE:   ready\n");
+
+	return 0;
+}
+
+/* **** No more functions called by board_init_f. **** */
+
+/*
+ * This function is called by lib_ppc/board.c:board_init_r. At this
+ * point, basic setup is done, U-Boot has been moved into SDRAM and
+ * PCI has been set up. From here we done late setup.
+ */
+int misc_init_r (void)
+{
+	host_bridge_init ();
+	return 0;
+}

board/jse/jse_priv.h

@@ -0,0 +1,25 @@
+#ifndef __jse_priv_H
+#define __jse_prov_H
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ *    Stephen Williams (steve@icarus.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+extern void host_bridge_init(void);
+
+#endif

board/jse/sdram.c

@@ -0,0 +1,182 @@
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ *    Stephen Williams (steve@icarus.com)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+# define SDRAM_LEN 0x08000000
+
+/*
+ * this is even after checkboard. It returns the size of the SDRAM
+ * that we have installed. This function is called by board_init_f
+ * in lib_ppc/board.c to initialize the memory and return what I
+ * found.
+ */
+long int initdram (int board_type)
+{
+	/* Configure the SDRAMS */
+
+	/* disable memory controller */
+	mtdcr (memcfga, mem_mcopt1);
+	mtdcr (memcfgd, 0x00000000);
+
+	udelay (500);
+
+	/* Clear SDRAM0_BESR0 (Bus Error Syndrome Register) */
+	mtdcr (memcfga, mem_besra);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Clear SDRAM0_BESR1 (Bus Error Syndrome Register) */
+	mtdcr (memcfga, mem_besrb);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Clear SDRAM0_ECCCFG (disable ECC) */
+	mtdcr (memcfga, mem_ecccf);
+	mtdcr (memcfgd, 0x00000000);
+
+	/* Clear SDRAM0_ECCESR (ECC Error Syndrome Register) */
+	mtdcr (memcfga, mem_eccerr);
+	mtdcr (memcfgd, 0xffffffff);
+
+	/* Timing register: CASL=2, PTA=2, CTP=2, LDF=1, RFTA=5, RCD=2 */
+	mtdcr (memcfga, mem_sdtr1);
+	mtdcr (memcfgd, 0x010a4016);
+
+	/* Memory Bank 0 Config == BA=0x00000000, SZ=64M, AM=3, BE=1 */
+	mtdcr (memcfga, mem_mb0cf);
+	mtdcr (memcfgd, 0x00084001);
+
+	/* Memory Bank 1 Config == BA=0x04000000, SZ=64M, AM=3, BE=1 */
+	mtdcr (memcfga, mem_mb1cf);
+	mtdcr (memcfgd, 0x04084001);
+
+	/* Memory Bank 2 Config ==  BE=0 */
+	mtdcr (memcfga, mem_mb2cf);
+	mtdcr (memcfgd, 0x00000000);
+
+	/* Memory Bank 3 Config ==  BE=0 */
+	mtdcr (memcfga, mem_mb3cf);
+	mtdcr (memcfgd, 0x00000000);
+
+	/* refresh timer = 0x400  */
+	mtdcr (memcfga, mem_rtr);
+	mtdcr (memcfgd, 0x04000000);
+
+	/* Power management idle timer set to the default. */
+	mtdcr (memcfga, mem_pmit);
+	mtdcr (memcfgd, 0x07c00000);
+
+	udelay (500);
+
+	/* Enable banks (DCE=1, BPRF=1, ECCDD=1, EMDUL=1) */
+	mtdcr (memcfga, mem_mcopt1);
+	mtdcr (memcfgd, 0x80e00000);
+
+	return SDRAM_LEN;
+}
+
+/*
+ * The U-Boot core, as part of the initialization to prepare for
+ * loading the monitor into SDRAM, requests of this function that the
+ * memory be tested. Return 0 if the memory tests OK.
+ */
+int testdram (void)
+{
+	unsigned long idx;
+	unsigned val;
+	unsigned errors;
+	volatile unsigned long *sdram;
+
+#ifdef DEBUG
+	printf ("SDRAM Controller Registers --\n");
+
+	mtdcr (memcfga, mem_mcopt1);
+	val = mfdcr (memcfgd);
+	printf ("    SDRAM0_CFG   : 0x%08x\n", val);
+
+	mtdcr (memcfga, 0x24);
+	val = mfdcr (memcfgd);
+	printf ("    SDRAM0_STATUS: 0x%08x\n", val);
+
+	mtdcr (memcfga, mem_mb0cf);
+	val = mfdcr (memcfgd);
+	printf ("    SDRAM0_B0CR  : 0x%08x\n", val);
+
+	mtdcr (memcfga, mem_mb1cf);
+	val = mfdcr (memcfgd);
+	printf ("    SDRAM0_B1CR  : 0x%08x\n", val);
+
+	mtdcr (memcfga, mem_sdtr1);
+	val = mfdcr (memcfgd);
+	printf ("    SDRAM0_TR    : 0x%08x\n", val);
+
+	mtdcr (memcfga, mem_rtr);
+	val = mfdcr (memcfgd);
+	printf ("    SDRAM0_RTR   : 0x%08x\n", val);
+#endif
+
+	/* Wait for memory to be ready by testing MRSCMPbit
+	   bit. Really, there should already have been plenty of time,
+	   given it was started long ago. But, best to check. */
+	for (idx = 0; idx < 1000000; idx += 1) {
+		mtdcr (memcfga, 0x24);
+		val = mfdcr (memcfgd);
+		if (val & 0x80000000)
+			break;
+	}
+
+	if (!(val & 0x80000000)) {
+		printf ("SDRAM ERROR: SDRAM0_STATUS never set!\n");
+		return 1;
+	}
+
+	/* Start memory test. */
+	printf ("test: %u MB - ", SDRAM_LEN / 1048576);
+
+	sdram = (unsigned long *) CFG_SDRAM_BASE;
+
+	printf ("write - ");
+	for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) {
+		sdram[idx + 0] = idx;
+		sdram[idx + 1] = ~idx;
+	}
+
+	printf ("read - ");
+	errors = 0;
+	for (idx = 2; idx < SDRAM_LEN / 4; idx += 2) {
+		if (sdram[idx + 0] != idx)
+			errors += 1;
+		if (sdram[idx + 1] != ~idx)
+			errors += 1;
+		if (errors > 0)
+			break;
+	}
+
+	if (errors > 0) {
+		printf ("NOT OK\n");
+		printf ("FIRST ERROR at %p: 0x%08lx:0x%08lx != 0x%08lx:0x%08lx\n",
+			sdram + idx, sdram[idx + 0], sdram[idx + 1], idx, ~idx);
+		return 1;
+	}
+
+	printf ("ok\n");
+	return 0;
+}

board/jse/u-boot.lds

@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text          : {
+    /* The start.o file includes the initial jump vector that
+       must be located in the beginning. It is the basic run-
+       time function that calls all other functions. */
+    cpu/ppc4xx/start.o	(.text)
+
+    board/jse/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/kup/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o kup.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/kup/common/flash.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -197,13 +197,13 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	case AMD_ID_LV800T:
 		info->flash_id += FLASH_AM800T;
 		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
 	case AMD_ID_LV800B:
 		info->flash_id += FLASH_AM800B;
 		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);			/* => no or unknown flash */

board/kup/common/kup.c

@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2004
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "kup.h"
+
+int misc_init_f (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile sysconf8xx_t *siu = &immap->im_siu_conf;
+
+	while (siu->sc_sipend & 0x20000000) {
+		/* printf("waiting for 5V VCC\n"); */
+		;
+	}
+
+	/* RS232 / RS485 default is RS232 */
+	immap->im_ioport.iop_padat &= ~(PA_RS485);
+	immap->im_ioport.iop_papar &= ~(PA_RS485);
+	immap->im_ioport.iop_paodr &= ~(PA_RS485);
+	immap->im_ioport.iop_padir |= (PA_RS485);
+	return (0);
+}
+
+
+#ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	/* We have one led for both pcmcia slots */
+	if (status) {		/* led on */
+		immap->im_ioport.iop_padat &= ~(PA_LED_YELLOW);
+	} else {
+		immap->im_ioport.iop_padat |= (PA_LED_YELLOW);
+	}
+}
+#endif
+
+void poweron_key (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	immap->im_ioport.iop_pcpar &= ~(PC_SWITCH1);
+	immap->im_ioport.iop_pcdir &= ~(PC_SWITCH1);
+
+	if (immap->im_ioport.iop_pcdat & (PC_SWITCH1))
+		setenv ("key1", "off");
+	else
+		setenv ("key1", "on");
+}

board/kup/common/kup.h

@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2004
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KUP_H
+#define __KUP_H
+
+#define PA_8       0x0080
+#define PA_11      0x0010
+#define PA_12      0x0008
+
+#define PB_14      0x00020000
+#define PB_17      0x00004000
+
+#define PC_9       0x0040
+
+#define PA_RS485                 PA_11   /* SCC1: 0=RS232 1=RS485 */
+#define PA_LED_YELLOW            PA_8
+#define BP_USB_VCC               PB_14   /* VCC for USB devices 0=vcc on, 1=vcc off*/
+#define PB_LCD_PWM	         PB_17	 /* PB 17 */
+#define PC_SWITCH1               PC_9    /* Reboot switch */
+
+extern void poweron_key (void);
+
+#endif	/* __KUP_H */

board/kup/kup4k/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/kup/kup4k/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this

board/kup/kup4k/kup4k.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000, 2001, 2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
  *
@@ -24,16 +24,23 @@
 
 #include <common.h>
 #include <mpc8xx.h>
+#include "../common/kup.h"
 #ifdef CONFIG_KUP4K_LOGO
    #include "s1d13706.h"
 #endif
 
+#undef DEBUG
+#ifdef  DEBUG
+# define debugk(fmt,args...)    printf(fmt ,##args)
+#else
+# define debugk(fmt,args...)
+#endif
+
+typedef struct {
+	volatile unsigned char *VmemAddr;
+	volatile unsigned char *RegAddr;
+} FB_INFO_S1D13xxx;
 
-typedef struct
-{
-    volatile unsigned char *VmemAddr;
-    volatile unsigned char *RegAddr;
-}FB_INFO_S1D13xxx;
 
 /* ------------------------------------------------------------------------- */
 
@@ -42,15 +49,15 @@ static long int dram_size (long int, long int *, long int);
 #endif
 
 #ifdef CONFIG_KUP4K_LOGO
-   void lcd_logo(bd_t *bd);
+void lcd_logo(bd_t *bd);
 #endif
 
+
 /* ------------------------------------------------------------------------- */
 
 #define	_NOT_USED_	0xFFFFFFFF
 
-const uint sdram_table[] =
-{
+const uint sdram_table[] = {
 	/*
 	 * Single Read. (Offset 0 in UPMA RAM)
 	 */
@@ -114,8 +121,19 @@ const uint sdram_table[] =
 
 int checkboard (void)
 {
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	uchar *latch,rev,mod;
 
-	printf ("### No HW ID - assuming KUP4K-Color\n");
+	/*
+	 * Init ChipSelect #4 (CAN + HW-Latch)
+	 */
+	immap->im_memctl.memc_or4 = 0xFFFF8926;
+	immap->im_memctl.memc_br4 = 0x90000401;
+
+	latch=(uchar *)0x90000200;
+	rev = (*latch & 0xF8) >> 3;
+	mod=(*latch & 0x03);
+	printf ("Board: KUP4K Rev %d.%d SN: %s\n",rev,mod,getenv("ethaddr"));
 	return (0);
 }
 
@@ -230,10 +248,42 @@ static long int dram_size (long int mamr_value, long int *base,
 {
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
 
 	memctl->memc_mamr = mamr_value;
 
-	return(get_ram_size(base, maxsize));
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
 }
 #endif
 
@@ -247,7 +297,6 @@ int misc_init_r (void)
 #ifdef CONFIG_KUP4K_LOGO
 	bd_t *bd = gd->bd;
 
-
 	lcd_logo (bd);
 #endif							/* CONFIG_KUP4K_LOGO */
 #ifdef CONFIG_IDE_LED
@@ -257,14 +306,14 @@ int misc_init_r (void)
 	immap->im_ioport.iop_papar &= ~0x80;
 	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
 #endif
+	setenv("hw","4k");
+	poweron_key();
 	return (0);
 }
 
 #ifdef CONFIG_KUP4K_LOGO
 
 
-#define PB_LCD_PWM	((uint)0x00004000)	/* PB 17 */
-
 void lcd_logo (bd_t * bd)
 {
 	FB_INFO_S1D13xxx fb_info;
@@ -277,104 +326,117 @@ void lcd_logo (bd_t * bd)
 	int rs, gs, bs;
 	int r = 8, g = 8, b = 4;
 	int r1, g1, b1;
+	int n;
+	uchar tmp[64];		/* long enough for environment variables */
+	int tft = 0;
 
-	immr->im_cpm.cp_pbpar &= ~PB_LCD_PWM;
-	immr->im_cpm.cp_pbodr &= ~PB_LCD_PWM;
-	immr->im_cpm.cp_pbdat &= ~PB_LCD_PWM;	/* set to 0 = enabled */
-	immr->im_cpm.cp_pbdir |= PB_LCD_PWM;
-
+	immr->im_cpm.cp_pbpar &= ~(PB_LCD_PWM);
+	immr->im_cpm.cp_pbodr &= ~(PB_LCD_PWM);
+	immr->im_cpm.cp_pbdat &= ~(PB_LCD_PWM);	/* set to 0 = enabled */
+	immr->im_cpm.cp_pbdir |= (PB_LCD_PWM);
 
 /*----------------------------------------------------------------------------- */
-	 /**/
 /* Initialize the chip and the frame buffer driver. */
-			 /**/
 /*----------------------------------------------------------------------------- */
-			memctl = &immr->im_memctl;
-/*	memctl->memc_or5 = 0xFFC007F0;    / * 4 MB  17 WS or externel TA */
-/*	memctl->memc_br5 = 0x80000801;    / * Start at 0x80000000 */
+	memctl = &immr->im_memctl;
 
-	memctl->memc_or5 = 0xFFC00708;	/* 4 MB  17 WS or externel TA */
+
+	/*
+	 * Init ChipSelect #5 (S1D13768)
+	 */
+	memctl->memc_or5 = 0xFFC007F0;	/* 4 MB  17 WS or externel TA */
 	memctl->memc_br5 = 0x80080801;	/* Start at 0x80080000 */
 
-
 	fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR);
 	fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR);
 
 	if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28)
-		|| (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
+	    || (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
 		printf ("Warning:LCD Controller S1D13706 not found\n");
+		setenv ("lcd", "none");
 		return;
 	}
 
-	/* init controller */
-	for (i = 0; i < sizeof (aS1DRegs) / sizeof (aS1DRegs[0]); i++) {
-		s1dReg = aS1DRegs[i].Index;
-		s1dValue = aS1DRegs[i].Value;
-/*      printf("sid1 Index: %02x Register: %02x Wert: %02x\n",i, aS1DRegs[i].Index, aS1DRegs[i].Value); */
+
+	for (i = 0; i < sizeof(aS1DRegs_prelimn) / sizeof(aS1DRegs_prelimn[0]); i++) {
+		s1dReg = aS1DRegs_prelimn[i].Index;
+		s1dValue = aS1DRegs_prelimn[i].Value;
+		debugk ("s13768 reg: %02x value: %02x\n",
+			aS1DRegs_prelimn[i].Index, aS1DRegs_prelimn[i].Value);
 		((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
+			s1dValue;
+	}
+
+
+	n = getenv_r ("lcd", tmp, sizeof (tmp));
+	if (n > 0) {
+		if (!strcmp ("tft", tmp))
+			tft = 1;
+		else
+			tft = 0;
+	}
+#if 0
+	if (((S1D_VALUE *) fb_info.RegAddr)[0xAC] & 0x04)
+		tft = 0;
+	else
+		tft = 1;
+#endif
+
+	debugk ("Port=0x%02x -> TFT=%d\n", tft,
+		((S1D_VALUE *) fb_info.RegAddr)[0xAC]);
+
+	/* init controller */
+	if (!tft) {
+		for (i = 0; i < sizeof(aS1DRegs_stn) / sizeof(aS1DRegs_stn[0]); i++) {
+			s1dReg = aS1DRegs_stn[i].Index;
+			s1dValue = aS1DRegs_stn[i].Value;
+			debugk ("s13768 reg: %02x value: %02x\n",
+				aS1DRegs_stn[i].Index,
+				aS1DRegs_stn[i].Value);
+			((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof(S1D_VALUE)] =
 				s1dValue;
-	}
+		}
+		n = getenv_r ("contrast", tmp, sizeof (tmp));
+		((S1D_VALUE *) fb_info.RegAddr)[0xB3] =
+			(n > 0) ? (uchar) simple_strtoul (tmp, NULL, 10) * 255 / 100 : 0xA0;
+		switch (bd->bi_busfreq) {
+		case 40000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
+			break;
+		case 48000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
+			break;
+		default:
+			printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
+		case 64000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
+			break;
+		}
+		/*   setenv("lcd","stn"); */
+	} else {
+		for (i = 0; i < sizeof(aS1DRegs_tft) / sizeof(aS1DRegs_tft[0]); i++) {
+			s1dReg = aS1DRegs_tft[i].Index;
+			s1dValue = aS1DRegs_tft[i].Value;
+			debugk ("s13768 reg: %02x value: %02x\n",
+				aS1DRegs_tft[i].Index,
+				aS1DRegs_tft[i].Value);
+			((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
+				s1dValue;
+		}
 
-#undef MONOCHROME
-#ifdef MONOCHROME
-	switch (bd->bi_busfreq) {
-#if 0
-	case 24000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x28;
-		break;
-	case 32000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x33;
-		break;
-#endif
-	case 40000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x40;
-		break;
-	case 48000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x4C;
-		break;
-	default:
-		printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",
-				bd->bi_busfreq);
-	case 64000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x69;
-		break;
+		switch (bd->bi_busfreq) {
+		default:
+			printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq);
+		case 40000000:
+			((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x42;
+			((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x30;
+			break;
+		}
+		/* setenv("lcd","tft"); */
 	}
-	((S1D_VALUE *) fb_info.RegAddr)[0x10] = 0x00;
-#else
-	switch (bd->bi_busfreq) {
-#if 0
-	case 24000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-		break;
-	case 32000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-		break;
-#endif
-	case 40000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
-		break;
-	case 48000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
-		break;
-	default:
-		printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",
-				bd->bi_busfreq);
-	case 64000000:
-		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
-		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
-		break;
-	}
-#endif
-
 
 	/* create and set colormap */
 	rs = 256 / (r - 1);
@@ -384,27 +446,13 @@ void lcd_logo (bd_t * bd)
 		r1 = (rs * ((i / (g * b)) % r)) * 255;
 		g1 = (gs * ((i / b) % g)) * 255;
 		b1 = (bs * ((i) % b)) * 255;
-/*     printf("%d %04x %04x %04x\n",i,r1>>4,g1>>4,b1>>4); */
+		debugk ("%d %04x %04x %04x\n", i, r1 >> 4, g1 >> 4, b1 >> 4);
 		S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4),
-						   (b1 >> 4));
+				   (b1 >> 4));
 	}
 
 	/* copy bitmap */
 	fb = (char *) (fb_info.VmemAddr);
 	memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240);
 }
-#endif							/* CONFIG_KUP4K_LOGO */
-
-#ifdef CONFIG_IDE_LED
-void ide_led (uchar led, uchar status)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-	/* We have one led for both pcmcia slots */
-	if (status) {				/* led on */
-		immap->im_ioport.iop_padat &= ~0x80;
-	} else {
-		immap->im_ioport.iop_padat |= 0x80;
-	}
-}
-#endif
+#endif	/* CONFIG_KUP4K_LOGO */

board/kup/kup4k/s1d13706.h

@@ -0,0 +1,174 @@
+/*---------------------------------------------------------------------------- */
+/* */
+/*  File generated by S1D13706CFG.EXE */
+/* */
+/*  Copyright (c) 2000,2001 Epson Research and Development, Inc. */
+/*  All rights reserved. */
+/* */
+/*---------------------------------------------------------------------------- */
+
+/* Panel: 320x240x8bpp 70Hz Color Single STN 8-bit (PCLK=6.250MHz) (Format 2) */
+
+#define S1D_DISPLAY_WIDTH           320
+#define S1D_DISPLAY_HEIGHT          240
+#define S1D_DISPLAY_BPP             8
+#define S1D_DISPLAY_SCANLINE_BYTES  320
+#define S1D_PHYSICAL_VMEM_ADDR      0x800A0000L
+#define S1D_PHYSICAL_VMEM_SIZE      0x14000L
+#define S1D_PHYSICAL_REG_ADDR       0x80080000L
+#define S1D_PHYSICAL_REG_SIZE       0x100
+#define S1D_DISPLAY_PCLK            6250
+#define S1D_PALETTE_SIZE            256
+#define S1D_REGDELAYOFF             0xFFFE
+#define S1D_REGDELAYON              0xFFFF
+
+#define S1D_WRITE_PALETTE(p,i,r,g,b)  \
+{  \
+    ((volatile S1D_VALUE*)(p))[0x0A/sizeof(S1D_VALUE)] = (S1D_VALUE)((r)>>4);  \
+    ((volatile S1D_VALUE*)(p))[0x09/sizeof(S1D_VALUE)] = (S1D_VALUE)((g)>>4);  \
+    ((volatile S1D_VALUE*)(p))[0x08/sizeof(S1D_VALUE)] = (S1D_VALUE)((b)>>4);  \
+    ((volatile S1D_VALUE*)(p))[0x0B/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
+}
+
+#define S1D_READ_PALETTE(p,i,r,g,b)  \
+{  \
+    ((volatile S1D_VALUE*)(p))[0x0F/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
+    r = ((volatile S1D_VALUE*)(p))[0x0E/sizeof(S1D_VALUE)];  \
+    g = ((volatile S1D_VALUE*)(p))[0x0D/sizeof(S1D_VALUE)];  \
+    b = ((volatile S1D_VALUE*)(p))[0x0C/sizeof(S1D_VALUE)];  \
+}
+
+typedef unsigned short S1D_INDEX;
+typedef unsigned char  S1D_VALUE;
+
+
+typedef struct
+{
+    S1D_INDEX Index;
+    S1D_VALUE Value;
+} S1D_REGS;
+
+
+static S1D_REGS aS1DRegs_prelimn[] =
+{
+    {0x10,0x00},   /* PANEL Type Register */
+    {0xA8,0x00},   /* GPIO Config Register 0 */
+    {0xA9,0x80},   /* GPIO Config Register 1 */
+
+};
+
+static S1D_REGS aS1DRegs_stn[] =
+{
+    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
+    {0x10,0xD0},   /* PANEL Type Register */
+    {0x11,0x00},   /* MOD Rate Register */
+    {0x14,0x27},   /* Horizontal Display Period Register */
+    {0x16,0x00},   /* Horizontal Display Period Start Pos Register 0 */
+    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
+    {0x18,0xF0},   /* Vertical Total Register 0 */
+    {0x19,0x00},   /* Vertical Total Register 1 */
+    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
+    {0x1D,0x00},   /* Vertical Display Period Register 1 */
+    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
+    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
+    {0x20,0x87},   /* Horizontal Sync Pulse Width Register */
+    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
+    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
+    {0x24,0x80},   /* Vertical Sync Pulse Width Register */
+    {0x26,0x01},   /* Vertical Sync Pulse Start Pos Register 0 */
+    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
+    {0x70,0x83},   /* Display Mode Register */
+    {0x71,0x00},   /* Special Effects Register */
+    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
+    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
+    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
+    {0x78,0x50},   /* Main Window Address Offset Register 0 */
+    {0x79,0x00},   /* Main Window Address Offset Register 1 */
+    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
+    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
+    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
+    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
+    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
+    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
+    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
+    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
+    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
+    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
+    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
+    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
+    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
+    {0xA0,0x00},   /* Power Save Config Register */
+    {0xA1,0x00},   /* CPU Access Control Register */
+    {0xA2,0x00},   /* Software Reset Register */
+    {0xA3,0x00},   /* BIG Endian Support Register */
+    {0xA4,0x00},   /* Scratch Pad Register 0 */
+    {0xA5,0x00},   /* Scratch Pad Register 1 */
+    {0xA8,0x01},   /* GPIO Config Register 0 */
+    {0xA9,0x80},   /* GPIO Config Register 1 */
+    {0xAC,0x01},   /* GPIO Status Control Register 0 */
+    {0xAD,0x00},   /* GPIO Status Control Register 1 */
+    {0xB0,0x10},   /* PWM CV Clock Control Register */
+    {0xB1,0x80},   /* PWM CV Clock Config Register */
+    {0xB2,0x00},   /* CV Clock Burst Length Register */
+    {0xAD,0x80},   /* reset seq */
+    {0x70,0x03},
+};
+
+static S1D_REGS aS1DRegs_tft[] =
+{
+    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
+    {0x05,0x42},   /* PCLK Config  Register */
+    {0x10,0x61},   /* PANEL Type Register */
+    {0x11,0x00},   /* MOD Rate Register */
+    {0x12,0x30},   /* Horizontal Total Register */
+    {0x14,0x27},   /* Horizontal Display Period Register */
+    {0x16,0x11},   /* Horizontal Display Period Start Pos Register 0 */
+    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
+    {0x18,0xFA},   /* Vertical Total Register 0 */
+    {0x19,0x00},   /* Vertical Total Register 1 */
+    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
+    {0x1D,0x00},   /* Vertical Display Period Register 1 */
+    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
+    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
+    {0x20,0x07},   /* Horizontal Sync Pulse Width Register */
+    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
+    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
+    {0x24,0x00},   /* Vertical Sync Pulse Width Register */
+    {0x26,0x00},   /* Vertical Sync Pulse Start Pos Register 0 */
+    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
+    {0x70,0x03},   /* Display Mode Register */
+    {0x71,0x00},   /* Special Effects Register */
+    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
+    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
+    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
+    {0x78,0x50},   /* Main Window Address Offset Register 0 */
+    {0x79,0x00},   /* Main Window Address Offset Register 1 */
+    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
+    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
+    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
+    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
+    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
+    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
+    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
+    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
+    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
+    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
+    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
+    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
+    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
+    {0xA0,0x00},   /* Power Save Config Register */
+    {0xA1,0x00},   /* CPU Access Control Register */
+    {0xA2,0x00},   /* Software Reset Register */
+    {0xA3,0x00},   /* BIG Endian Support Register */
+    {0xA4,0x00},   /* Scratch Pad Register 0 */
+    {0xA5,0x00},   /* Scratch Pad Register 1 */
+    {0xA8,0x01},   /* GPIO Config Register 0 */
+    {0xA9,0x80},   /* GPIO Config Register 1 */
+    {0xAC,0x01},   /* GPIO Status Control Register 0 */
+    {0xAD,0x00},   /* GPIO Status Control Register 1 */
+    {0xB0,0x10},   /* PWM CV Clock Control Register */
+    {0xB1,0x80},   /* PWM CV Clock Config Register */
+    {0xB2,0x00},   /* CV Clock Burst Length Register */
+    {0xAD,0x80},   /* reset seq */
+    {0x70,0x03},
+};

board/kup/kup4k/u-boot.lds

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -57,17 +57,17 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/mpc8xx/start.o		(.text)
-    cpu/mpc8xx/traps.o		(.text)
-    common/dlmalloc.o		(.text)
-    lib_ppc/ppcstring.o		(.text)
+/*
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
     lib_generic/vsprintf.o	(.text)
     lib_generic/crc32.o		(.text)
     lib_generic/zlib.o		(.text)
-    lib_ppc/cache.o		(.text)
-    lib_ppc/time.o		(.text)
 
     . = env_offset;
-    common/environment.o	(.ppcenv)
+    common/environment.o(.text)
+*/
 
     *(.text)
     *(.fixup)

board/kup/kup4k/u-boot.lds.debug

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this

board/kup/kup4x/Makefile

@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################

board/kup/kup4x/config.mk

@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# KUP4X board
+#
+
+TEXT_BASE = 0x40000000

board/kup/kup4x/kup4x.c

@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "../common/kup.h"
+#ifdef CONFIG_KUP4K_LOGO
+/* #include "s1d13706.h" */
+#endif
+
+#define KUP4X_USB
+
+
+typedef struct {
+	volatile unsigned char *VmemAddr;
+	volatile unsigned char *RegAddr;
+} FB_INFO_S1D13xxx;
+
+/* ------------------------------------------------------------------------- */
+
+int usb_init_kup4x (void);
+
+
+#ifdef CONFIG_KUP4K_LOGO
+void lcd_logo (bd_t * bd);
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] = {
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
+	0x1FF77C47,		/* last */
+
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+	0x1FF77C35, 0xEFEABC34, 0x1FB57C35,	/* last */
+
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47,	/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47,	/* last */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07,	/* last */
+	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x7FFFFC07,		/* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	uchar *latch, rev, mod;
+
+	/*
+	 * Init ChipSelect #4 (CAN + HW-Latch)
+	 */
+	memctl->memc_or4 = 0xFFFF8926;
+	memctl->memc_br4 = 0x90000401;
+
+	latch = (uchar *) 0x90000200;
+	rev = (*latch & 0xF8) >> 3;
+	mod = (*latch & 0x03);
+	printf ("Board: KUP4X Rev %d.%d SN: %s\n", rev, mod,
+		getenv ("ethaddr"));
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0 = 0;
+	long int size_b1 = 0;
+	long int size_b2 = 0;
+	long int size_b3 = 0;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+		   sizeof (sdram_table) / sizeof (uint));
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
+	 * preliminary addresses - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+
+/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+
+	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
+	udelay (1);
+	memctl->memc_mcr = 0x80002830;	/* SDRAM bank 0 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80002106;	/* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 1 */
+	udelay (1);
+	memctl->memc_mcr = 0x80004830;	/* SDRAM bank 1 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80004106;	/* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 2 */
+	udelay (1);
+	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 2 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80006106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mcr = 0x8000C105;	/* SDRAM bank 2 */
+	udelay (1);
+	memctl->memc_mcr = 0x8000C830;	/* SDRAM bank 2 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x8000C106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
+	udelay (1);
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+	udelay (1000);
+#if 0				/* 4 x 8MB */
+	size_b0 = 0x00800000;
+	size_b1 = 0x00800000;
+	size_b2 = 0x00800000;
+	size_b3 = 0x00800000;
+	memctl->memc_mptpr = CFG_MPTPR;
+	udelay (1000);
+	memctl->memc_or1 = 0xFF800A00;
+	memctl->memc_br1 = 0x00000081;
+	memctl->memc_or2 = 0xFF000A00;
+	memctl->memc_br2 = 0x00800081;
+	memctl->memc_or3 = 0xFE000A00;
+	memctl->memc_br3 = 0x01000081;
+	memctl->memc_or6 = 0xFE000A00;
+	memctl->memc_br6 = 0x01800081;
+#else  /* 4 x 16 MB */
+	size_b0 = 0x01000000;
+	size_b1 = 0x01000000;
+	size_b2 = 0x01000000;
+	size_b3 = 0x01000000;
+	memctl->memc_mptpr = CFG_MPTPR;
+	udelay (1000);
+	memctl->memc_or1 = 0xFF000A00;
+	memctl->memc_br1 = 0x00000081;
+	memctl->memc_or2 = 0xFE000A00;
+	memctl->memc_br2 = 0x01000081;
+	memctl->memc_or3 = 0xFD000A00;
+	memctl->memc_br3 = 0x02000081;
+	memctl->memc_or6 = 0xFC000A00;
+	memctl->memc_br6 = 0x03000081;
+#endif
+	udelay (10000);
+
+	return (size_b0 + size_b1 + size_b2 + size_b3);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+#if 0
+static long int dram_size (long int mamr_value, long int *base,
+			   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];		/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+#endif
+
+int misc_init_r (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+#ifdef CONFIG_IDE_LED
+	/* Configure PA8 as output port */
+	immap->im_ioport.iop_padir |= 0x80;
+	immap->im_ioport.iop_paodr |= 0x80;
+	immap->im_ioport.iop_papar &= ~0x80;
+	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
+#endif
+#ifdef KUP4X_USB
+	usb_init_kup4x ();
+#endif
+	setenv ("hw", "4x");
+	poweron_key ();
+	return (0);
+}

board/kup/kup4x/u-boot.lds

@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+/*
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/kup/kup4x/u-boot.lds.debug

@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/kup4k/s1d13706.h

@@ -1,113 +0,0 @@
-/*---------------------------------------------------------------------------- */
-/* */
-/*  File generated by S1D13706CFG.EXE */
-/* */
-/*  Copyright (c) 2000,2001 Epson Research and Development, Inc. */
-/*  All rights reserved. */
-/* */
-/*---------------------------------------------------------------------------- */
-
-/* Panel: 320x240x8bpp 70Hz Color Single STN 8-bit (PCLK=6.250MHz) (Format 2) */
-
-#define S1D_DISPLAY_WIDTH           320
-#define S1D_DISPLAY_HEIGHT          240
-#define S1D_DISPLAY_BPP             8
-#define S1D_DISPLAY_SCANLINE_BYTES  320
-#define S1D_PHYSICAL_VMEM_ADDR      0x800A0000L
-#define S1D_PHYSICAL_VMEM_SIZE      0x14000L
-#define S1D_PHYSICAL_REG_ADDR       0x80080000L
-#define S1D_PHYSICAL_REG_SIZE       0x100
-#define S1D_DISPLAY_PCLK            6250
-#define S1D_PALETTE_SIZE            256
-#define S1D_REGDELAYOFF             0xFFFE
-#define S1D_REGDELAYON              0xFFFF
-
-#define S1D_WRITE_PALETTE(p,i,r,g,b)  \
-{  \
-    ((volatile S1D_VALUE*)(p))[0x0A/sizeof(S1D_VALUE)] = (S1D_VALUE)((r)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x09/sizeof(S1D_VALUE)] = (S1D_VALUE)((g)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x08/sizeof(S1D_VALUE)] = (S1D_VALUE)((b)>>4);  \
-    ((volatile S1D_VALUE*)(p))[0x0B/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
-}
-
-#define S1D_READ_PALETTE(p,i,r,g,b)  \
-{  \
-    ((volatile S1D_VALUE*)(p))[0x0F/sizeof(S1D_VALUE)] = (S1D_VALUE)(i);  \
-    r = ((volatile S1D_VALUE*)(p))[0x0E/sizeof(S1D_VALUE)];  \
-    g = ((volatile S1D_VALUE*)(p))[0x0D/sizeof(S1D_VALUE)];  \
-    b = ((volatile S1D_VALUE*)(p))[0x0C/sizeof(S1D_VALUE)];  \
-}
-
-typedef unsigned short S1D_INDEX;
-typedef unsigned char  S1D_VALUE;
-
-
-typedef struct
-{
-    S1D_INDEX Index;
-    S1D_VALUE Value;
-} S1D_REGS;
-
-static S1D_REGS aS1DRegs[] =
-{
-	{0x04,0x10},	/* BUSCLK MEMCLK Config Register */
-#if 0
-	{0x05,0x32},	/* PCLK Config  Register  */
-#endif
-	{0x10,0xD0},	/* PANEL Type Register */
-	{0x11,0x00},	/* MOD Rate Register */
-#if 0
-	{0x12,0x34},	/* Horizontal Total Register */
-#endif
-	{0x14,0x27},	/* Horizontal Display Period Register */
-	{0x16,0x00},	/* Horizontal Display Period Start Pos Register 0 */
-	{0x17,0x00},	/* Horizontal Display Period Start Pos Register 1 */
-	{0x18,0xF0},	/* Vertical Total Register 0  */
-	{0x19,0x00},	/* Vertical Total Register 1 */
-	{0x1C,0xEF},	/* Vertical Display Period Register 0 */
-	{0x1D,0x00},	/* Vertical Display Period Register 1 */
-	{0x1E,0x00},	/* Vertical Display Period Start Pos Register 0 */
-	{0x1F,0x00},	/* Vertical Display Period Start Pos Register 1 */
-	{0x20,0x87},	/* Horizontal Sync Pulse Width Register */
-	{0x22,0x00},	/* Horizontal Sync Pulse Start Pos Register 0 */
-	{0x23,0x00},	/* Horizontal Sync Pulse Start Pos Register 1 */
-	{0x24,0x80},	/* Vertical Sync Pulse Width Register */
-	{0x26,0x01},	/* Vertical Sync Pulse Start Pos Register 0 */
-	{0x27,0x00},	/* Vertical Sync Pulse Start Pos Register 1 */
-	{0x70,0x83},	/* Display Mode Register */
-	{0x71,0x00},	/* Special Effects Register */
-	{0x74,0x00},	/* Main Window Display Start Address Register 0 */
-	{0x75,0x00},	/* Main Window Display Start Address Register 1 */
-	{0x76,0x00},	/* Main Window Display Start Address Register 2 */
-	{0x78,0x50},	/* Main Window Address Offset Register 0 */
-	{0x79,0x00},	/* Main Window Address Offset Register 1 */
-	{0x7C,0x00},	/* Sub Window Display Start Address Register 0 */
-	{0x7D,0x00},	/* Sub Window Display Start Address Register 1 */
-	{0x7E,0x00},	/* Sub Window Display Start Address Register 2 */
-	{0x80,0x50},	/* Sub Window Address Offset Register 0 */
-	{0x81,0x00},	/* Sub Window Address Offset Register 1 */
-	{0x84,0x00},	/* Sub Window X Start Pos Register 0 */
-	{0x85,0x00},	/* Sub Window X Start Pos Register 1 */
-	{0x88,0x00},	/* Sub Window Y Start Pos Register 0 */
-	{0x89,0x00},	/* Sub Window Y Start Pos Register 1 */
-	{0x8C,0x4F},	/* Sub Window X End Pos Register 0 */
-	{0x8D,0x00},	/* Sub Window X End Pos Register 1 */
-	{0x90,0xEF},	/* Sub Window Y End Pos Register 0 */
-	{0x91,0x00},	/* Sub Window Y End Pos Register 1 */
-	{0xA0,0x00},	/* Power Save Config Register */
-	{0xA1,0x00},	/* CPU Access Control Register */
-	{0xA2,0x00},	/* Software Reset Register */
-	{0xA3,0x00},	/* BIG Endian Support Register */
-	{0xA4,0x00},	/* Scratch Pad Register 0 */
-	{0xA5,0x00},	/* Scratch Pad Register 1 */
-	{0xA8,0x01},	/* GPIO Config Register 0 */
-	{0xA9,0x80},	/* GPIO Config Register 1 */
-	{0xAC,0x01},	/* GPIO Status Control Register 0 */
-	{0xAD,0x00},	/* GPIO Status Control Register 1 */
-	{0xB0,0x10},	/* PWM CV Clock Control Register */
-	{0xB1,0x80},	/* PWM CV Clock Config Register */
-	{0xB2,0x00},	/* CV Clock Burst Length Register */
-	{0xB3,0xA0},	/* PWM Clock Duty Cycle Register */
-	{0xAD,0x80},	/* reset seq */
-	{0x70,0x03},	/*  */
-};

board/modnet50/Makefile

@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= modnet50.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################

board/modnet50/config.mk

@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x00f00000
+#CROSS_COMPILE = arm-elf-

board/modnet50/flash.c

@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2002
+ * MAZeT GmbH <www.mazet.de>
+ * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ *
+ * The most stuff comes from PPCBoot and Linux.
+ *
+ * IMMS gGmbH <www.imms.de>
+ * Thomas Elste <info@elste.org>
+ *
+ * Modifications for ModNET50 Board
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/netarm_registers.h>
+
+#define SCR   (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL))
+
+#define ALIGN_ABORT_OFF		SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT
+#define ALIGN_ABORT_ON		SCR = SCR |  NETARM_GEN_SYS_CFG_ALIGN_ABORT
+
+#define PROG_ADDR		(0x555*2)
+#define SETUP_ADDR		(0x555*2)
+#define ID_ADDR			(0x555*2)
+#define UNLOCK_ADDR1		(0x555*2)
+#define UNLOCK_ADDR2		(0x2AA*2)
+
+#define UNLOCK_CMD1		(0xAA)
+#define UNLOCK_CMD2		(0x55)
+#define ERASE_SUSPEND_CMD	(0xB0)
+#define ERASE_RESUME_CMD	(0x30)
+#define RESET_CMD		(0xF0)
+#define ID_CMD			(0x90)
+#define SECERASE_CMD		(0x30)
+#define CHIPERASE_CMD		(0x10)
+#define PROG_CMD		(0xa0)
+#define SETUP_CMD		(0x80)
+
+#define DQ2			(0x04)
+#define DQ3			(DQ2*2)
+#define DQ5			(DQ3*4)
+#define DQ6			(DQ5*2)
+
+#define WRITE_UNLOCK(addr) { \
+  *(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \
+  *(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \
+}
+
+#define CONFIG_AM29_RESERVED	(0)
+#define K			(1024)
+#define MB			(4)
+
+#define CELL_SIZE		(64*K)
+#define DEVICE_SIZE		(MB*K*K)
+#define CELLS_PER_DEVICE	(DEVICE_SIZE/CELL_SIZE)
+#define RESERVED_CELLS		(CONFIG_AM29_RESERVED*K)/CELL_SIZE
+#define MAX_FLASH_DEVICES	(1)
+#define AVAIL_SIZE		(DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+static __u16 toggling_bits;
+
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_get_size (ulong baseaddr, flash_info_t * info)
+{
+	short i;
+	__u16 flashtest;
+
+	/* Write auto select command sequence and test FLASH answer */
+	WRITE_UNLOCK (baseaddr);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
+	flashtest /* manufacturer ID */  = *(volatile __u16 *) (baseaddr);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
+
+	switch ((__u32) ((flashtest << 16) + flashtest)) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK;
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);	/* no or unknown flash */
+	}
+
+	/* Write auto select command sequence and test FLASH answer */
+	WRITE_UNLOCK (baseaddr);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
+	flashtest /* device ID */  = *(volatile __u16 *) (baseaddr + 2);
+	*(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
+
+	/* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */
+	toggling_bits = (DQ2 | DQ6);
+
+	switch ((__u32) ((flashtest << 16) + flashtest)) {
+	case AMD_ID_LV160B:
+		info->flash_id +=
+			(FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
+		info->sector_count = CFG_MAX_FLASH_SECT;
+		info->size = CFG_FLASH_SIZE;
+		/* 1*16K Boot Block
+		   2*8K Parameter Block
+		   1*32K Small Main Block */
+		info->start[0] = baseaddr;
+		info->start[1] = baseaddr + 0x4000;
+		info->start[2] = baseaddr + 0x6000;
+		info->start[3] = baseaddr + 0x8000;
+		for (i = 1; i < info->sector_count; i++)
+			info->start[3 + i] = baseaddr + i * CFG_MAIN_SECT_SIZE;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);	/* no or unknown flash */
+	}
+
+	for (i = 0; i < info->sector_count; i++) {
+		/* Write auto select command sequence and test FLASH answer */
+		WRITE_UNLOCK (info->start[i]);
+		*(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD;
+		flashtest /* protected verify */  = *(volatile __u16 *) (info->start[i] + 4);
+		*(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD;
+		if (flashtest & 0x0001) {
+			info->protect[i] = 1;	/* D0 = 1 if protected */
+		} else {
+			info->protect[i] = 0;
+		}
+	}
+	return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_init (void)
+{
+	ulong size = 0;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here (only one bank) */
+	size = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size >> 20);
+	}
+
+	/*
+	 * protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("Fujitsu ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMDL323B:
+		printf ("29DL323B (32 M, bottom sector)\n");
+		break;
+	case (FLASH_AM160LV | FLASH_AM160B):
+		printf ("29LV160BE (1M x 16, bottom sector)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 4) == 0)
+			printf ("\n   ");
+		printf (" S%02d @ 0x%08lX%s", i,
+			info->start[i], info->protect[i] ? " !" : "  ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_protection (flash_info_t * info, int s_first, int s_last)
+{
+	int sect, prot = 0;
+
+	for (sect = s_first; sect <= s_last; sect++)
+		if (info->protect[sect])
+			prot++;
+	if (prot)
+		printf ("- can't erase %d protected sectors\n", prot);
+	return prot;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_erase_amd (ulong start)
+{
+	__u16 v1, v2;
+
+	v1 = *(volatile __u16 *) (start);
+	v2 = *(volatile __u16 *) (start);
+
+	if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
+		if (((v1 | v2) & DQ5) == DQ5) {
+			printf ("[DQ5] ");
+			/* OOPS: exceeded timing limits */
+
+			v1 = *(volatile __u16 *) (start);
+			v2 = *(volatile __u16 *) (start);
+
+			if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
+
+				printf ("[%s] ",
+					((toggling_bits & (DQ2 | DQ6)) ==
+					 (DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6");
+
+				/* OOPS: there is an erasure in progress,
+				 *       try to reset chip */
+				*(volatile __u16 *) (start) =
+					(__u16) RESET_CMD;
+
+				return 1;	/* still busy */
+			}
+		}
+		return 1;	/* still busy */
+	}
+	return 0;		/* be free */
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, sect, setup_offset = 0;
+	int rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("- missing\n");
+		return ERR_UNKNOWN_FLASH_TYPE;
+	}
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return ERR_INVAL;
+	}
+
+	if (flash_check_protection (info, s_first, s_last))
+		return ERR_PROTECTED;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_FUJ:
+	case FLASH_MAN_AMD:
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (FLASH_AM160LV | FLASH_AM160B):
+			setup_offset = UNLOCK_ADDR1;	/* just the adress for setup_cmd differs */
+		case FLASH_AMDL323B:
+			/*
+			 * Disable interrupts which might cause a timeout
+			 * here. Remember that our exception vectors are
+			 * at address 0 in the flash, and we don't want a
+			 * (ticker) exception to happen while the flash
+			 * chip is in programming mode.
+			 */
+			flag = disable_interrupts ();
+			/* Start erase on unprotected sectors */
+			for (sect = s_first; sect <= s_last && !ctrlc ();
+			     sect++) {
+				printf ("Erasing sector %2d ... ", sect);
+
+				if (info->protect[sect] == 0) {
+					/* not protected */
+					/* Write sector erase command sequence */
+					WRITE_UNLOCK (info->start[0]);
+					*(volatile __u16 *) (info->start[0] +
+							     setup_offset) =
+						(__u16) SETUP_CMD;
+					WRITE_UNLOCK (info->start[0]);
+					*(volatile __u16 *) (info->
+							     start[sect]) =
+						(__u16) SECERASE_CMD;
+
+					/* wait some time */
+					reset_timer_masked ();
+					while (get_timer_masked () < 1000) {
+					}
+
+					/* arm simple, non interrupt dependent timer */
+					reset_timer_masked ();
+					while (flash_check_erase_amd (info->start[sect])) {
+						if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+							printf ("timeout!\n");
+							/* OOPS: reach timeout,
+							 * try to reset chip
+							 */
+							*(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD;
+							rc = ERR_TIMOUT;
+							goto outahere_323B;
+						}
+					}
+					printf ("ok.\n");
+				} else {
+					printf ("protected!\n");
+				}
+			}
+			if (ctrlc ())
+				printf ("User Interrupt!\n");
+outahere_323B:
+			/* allow flash to settle - wait 10 ms */
+			udelay_masked (10000);
+			if (flag)
+				enable_interrupts ();
+			return rc;
+		default:
+			printf ("- unknown chip type\n");
+			return ERR_UNKNOWN_FLASH_TYPE;
+		}
+		break;
+	default:
+		printf ("- unknown vendor ");
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_check_write_amd (ulong dest)
+{
+	__u16 v1, v2;
+
+	v1 = *(volatile __u16 *) (dest);
+	v2 = *(volatile __u16 *) (dest);
+
+	/* DQ6 toggles during write */
+	if (((v1 ^ v2) & DQ6) == DQ6) {
+		if (((v1 | v2) & DQ5) == DQ5) {
+			printf ("[DQ5] @ %08lX\n", dest);
+
+			/* OOPS: exceeded timing limits,
+			 *       try to reset chip */
+			*(volatile __u16 *) (dest) = (__u16) RESET_CMD;
+			return 0;	/* be free */
+		}
+		return 1;	/* still busy */
+	}
+
+	return 0;		/* be free */
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+static int write_word (flash_info_t * info, ulong dest, ushort data)
+{
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*(__u16 *) (dest) & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+	/* Write program command sequence */
+	WRITE_UNLOCK (info->start[0]);
+
+	/* Flash dependend program seqence */
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_FUJ:
+	case FLASH_MAN_AMD:
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (FLASH_AM160LV | FLASH_AM160B):
+			*(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) =
+				(__u16) PROG_CMD;
+			*(volatile __u16 *) (dest) = (__u16) data;
+			break;
+		case FLASH_AMDL323B:
+			*(volatile __u16 *) (dest) = (__u16) PROG_CMD;
+			*(volatile __u16 *) (dest) = (__u16) data;
+			break;
+		}
+	}
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	while (flash_check_write_amd (dest)) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			printf ("timeout! @ %08lX\n", dest);
+			/* OOPS: reach timeout,
+			 *       try to reset chip */
+			*(volatile __u16 *) (dest) = (__u16) RESET_CMD;
+
+			rc = ERR_TIMOUT;
+			goto outahere_323B;
+		}
+	}
+
+	/* Check if Flash was (accurately) written */
+	if (*(__u16 *) (dest) != data)
+		rc = ERR_PROG_ERROR;
+
+outahere_323B:
+	if (flag)
+		enable_interrupts ();
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	ushort data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		data = *((ushort *) src);
+		if ((rc = write_word (info, wp, data)) != 0)
+			return (rc);
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0)
+		return ERR_OK;
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 8);
+	}
+
+	return write_word (info, wp, data);
+}

board/modnet50/memsetup.S

@@ -0,0 +1,204 @@
+/*
+ * Memory Setup stuff - taken from Linux
+ *
+ * Copyright (c) 2002	Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
+ * (c) 2004 IMMS gGmbH <www.imms.de>, Thomas Elste <info@elste.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/netarm_registers.h>
+
+
+/* some parameters for the board */
+#define FLASH_90ns_WAIT_STATES	((NETARM_PLL_COUNT_VAL + 2) / 3)
+#define FLASH_70ns_WAIT_STATES	4
+
+#define NETARM_MMAP_CS0_BASE	(PHYS_FLASH_1)
+#if 1
+#define NETARM_MMAP_CS0_MASK	(~(PHYS_FLASH_1_SIZE - 1))
+#else
+#define NETARM_MMAP_CS0_MASK	(~(1000000 - 1))
+#endif
+#define NETARM_MMAP_CS1_BASE	(PHYS_SDRAM_1)
+#define NETARM_MMAP_CS1_MASK	(~(PHYS_SDRAM_1_SIZE - 1))
+#define NETARM_MMAP_CS2_BASE	(PHYS_SDRAM_2)
+#define NETARM_MMAP_CS2_MASK	(~(PHYS_SDRAM_2_SIZE - 1))
+#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
+#define NETARM_MMAP_CS3_BASE	(PHYS_NVRAM_1)
+#define NETARM_MMAP_CS3_MASK	(~(PHYS_NVRAM_SIZE - 1))
+#endif
+#define NETARM_MMAP_CS4_BASE	(PHYS_EXT_1)
+#define NETARM_MMAP_CS4_MASK	(~(PHYS_EXT_SIZE - 1))
+
+/* setting up the memory */
+.globl memsetup
+memsetup:
+
+#if defined(CONFIG_MODNET50)
+	ldr	pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE)
+
+_jump_to_high:
+	/*
+	 * MEM Config Reg
+	 * ---------------------------------------------------
+	 */
+	ldr	r0, =NETARM_MEM_MODULE_BASE
+	ldr	r1, =(	NETARM_MEM_REFR_PERIOD_USEC(16) | \
+			NETARM_MEM_CFG_REFRESH_EN | \
+			NETARM_MEM_CFG_REFR_CYCLE_5CLKS )
+	str	r1, [r0, #+NETARM_MEM_MODULE_CONFIG]
+
+
+memsetup_cs0:
+	/*
+	 * Base Addr / Option Reg 0 (Flash)
+	 * ---------------------------------------------------
+	 */
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS0_BASE) | \
+			NETARM_MEM_BAR_DRAM_FP | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_BAL | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS0_BASE_ADDR]
+
+	/* trust that the bus size for flash was strapped correctly */
+	/* this saves the bus width in r2 and then ORs it back in */
+	/* it's pretty safe assumption, otherwise it wouldn't boot */
+	ldr	r2, [r0, #+NETARM_MEM_CS0_OPTIONS]
+	and	r2, r2, #NETARM_MEM_OPT_BUS_SIZE_MASK
+
+/*	just a test: assume 32 bit flash mem */
+/*	mov	r2, #NETARM_MEM_OPT_32BIT */
+
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS0_MASK) | \
+			NETARM_MEM_OPT_WAIT_STATES(FLASH_70ns_WAIT_STATES) | \
+			NETARM_MEM_OPT_BCYC_4 | \
+			NETARM_MEM_OPT_BSIZE_16 | \
+			NETARM_MEM_OPT_16BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+
+	orr	r1, r1, r2
+	str	r1, [r0, #+NETARM_MEM_CS0_OPTIONS]
+
+
+memsetup_cs1:
+	/*
+	 * Base Addr / Option Reg 1 (DRAM #1)
+	 * ---------------------------------------------------
+	 */
+#ifdef CONFIG_NETARM_NET40_REV2
+	/* we have to config SDRAM in burst mode */
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
+			NETARM_MEM_OPT_BCYC_2 | \
+			NETARM_MEM_OPT_BSIZE_16 | \
+			NETARM_MEM_OPT_WAIT_STATES(0) | \
+			NETARM_MEM_OPT_32BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+	str	r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
+
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
+			NETARM_MEM_BAR_DRAM_SYNC | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
+			NETARM_MEM_BAR_DRAM_SEL | \
+			NETARM_MEM_BAR_BURST_EN | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
+#else
+	/* we have to config FPDRAM in burst mode with smaller burst access size */
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS1_MASK) | \
+			NETARM_MEM_OPT_BCYC_2 | \
+			NETARM_MEM_OPT_BSIZE_16 | \
+			NETARM_MEM_OPT_WAIT_STATES(0) | \
+			NETARM_MEM_OPT_32BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+	str	r1, [r0, #+NETARM_MEM_CS1_OPTIONS]
+
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS1_BASE) | \
+			NETARM_MEM_BAR_DRAM_SYNC | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_UNBAL | \
+			NETARM_MEM_BAR_DRAM_SEL | \
+			NETARM_MEM_BAR_BURST_EN | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS1_BASE_ADDR]
+
+#endif /* CONFIG_NETARM_NET40_REV2 */
+
+
+memsetup_cs3:
+	/*
+	 * Base Addr / Option Reg 3 (EEPROM, NVRAM)
+	 * ---------------------------------------------------
+	 */
+#if defined(CONFIG_NETARM_EEPROM) && defined(PHYS_NVRAM_1) && defined(PHYS_NVRAM_SIZE)
+	ldr	r1, =(	NETARM_MEM_OPT_BASE_USE(NETARM_MMAP_CS3_MASK) | \
+			NETARM_MEM_OPT_BCYC_3 | \
+			NETARM_MEM_OPT_BSIZE_2 | \
+			NETARM_MEM_OPT_WAIT_STATES(10) | \
+			NETARM_MEM_OPT_8BIT | \
+			NETARM_MEM_OPT_READ_ASYNC | \
+			NETARM_MEM_OPT_WRITE_ASYNC )
+	str	r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
+
+	ldr	r1, =(	NETARM_MEM_BAR_BASE(NETARM_MMAP_CS3_BASE) | \
+			NETARM_MEM_BAR_DRAM_FP | \
+			NETARM_MEM_BAR_DRAM_MUX_INT | \
+			NETARM_MEM_BAR_DRAM_MUX_BAL | \
+			NETARM_MEM_BAR_VALID )
+	str	r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
+#else
+	/* we don't need EEPROM --> no config */
+	ldr	r1, =( 0 )
+	str	r1, [r0, #+NETARM_MEM_CS3_OPTIONS]
+
+	ldr	r1, =( 0 )
+	str	r1, [r0, #+NETARM_MEM_CS3_BASE_ADDR]
+#endif
+
+
+#else
+/*
+#error "missing CONFIG_MODNET50 (see your config.h)"
+*/
+#endif /* CONFIG_MODNET50 */
+
+
+memsetup_end:
+	/*
+	 * manipulate address in lr and ip to match new
+	 * address space
+	 */
+	ldr	r3, =(NETARM_MMAP_CS0_BASE)
+	mov	r0, lr
+	add	r0, r3, r0
+	mov	lr, r0
+	mov	r0, ip
+	add	r0, r3, r0
+	mov	ip, r0
+
+	/* everything is fine now */
+	mov	pc, lr

board/modnet50/modnet50.c

@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	/* address for the kernel command line */
+	gd->bd->bi_boot_params = 0x800;
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	if (CONFIG_NR_DRAM_BANKS == 2) {
+		gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+		gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	}
+	return (0);
+}

board/modnet50/u-boot.lds

@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text	   :
+	{
+	  cpu/arm720t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+				  /* Stabs debugging sections.	  */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}