Add passing of the command line and memory size information to the

kernel on xaeniax board.
Code cleanup for GCC-3.3.x compilers
2026-06-12 22:49:43 +03:00 · 2004-10-19 22:17:51 +00:00 · 2004-10-17 21:12:06 +00:00 · 2004-10-11 23:10:30 +00:00 · 2004-10-11 23:03:10 +00:00 · 2004-10-11 22:51:13 +00:00
902 changed files with 109854 additions and 15666 deletions
--- a/1038
+++ b/1038
--- a/11
+++ b/11
@@ -1,3 +1,14 @@
+  NOTE! This copyright does *not* cover the so-called "standalone"
+applications that use U-Boot services by means of the jump table
+provided by U-Boot exactly for this purpose - this is merely
+considered normal use of U-Boot, and does *not* fall under the
+heading of "derived work". Also note that the GPL below is
+copyrighted by the Free Software Foundation, but the instance of code
+that it refers to (the U-Boot source code) is copyrighted by me and
+others who actually wrote it. -- Wolfgang Denk
+
+=======================================================================
+
 		    GNU GENERAL PUBLIC LICENSE
 		       Version 2, June 1991

--- a/105
+++ b/105
@@ -28,16 +28,29 @@ D: ERIC Support

 N: Pantelis Antoniou
 E: panto@intracom.gr
-D: NETVIA board support, ARTOS support.
+D: NETVIA & NETPHONE board support, ARTOS support.

 N: Pierre Aubert
 E: <p.aubert@staubli.com>
 D: Support for RPXClassic board

+N: Yuli Barcohen
+E: yuli@arabellasw.com
+D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
+D: Support for Zephyr Engineering ZPC.1900 board.
+D: Support for Interphase iSPAN boards.
+D: Support for Analogue&Micro Adder boards.
+W: http://www.arabellasw.com
+
 N: Jerry van Baren
 E: <vanbaren@cideas.com>
 D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test.

+N: Pavel Bartusek
+E: <pba@sysgo.com>
+D: Reiserfs support
+W: http://www.elinos.com
+
 N: Andre Beaudin
 E: <andre.beaudin@colubris.com>
 D: PCMCIA, Ethernet, TFTP
@@ -62,6 +75,12 @@ N: Oliver Brown
 E: obrown@adventnetworks.com
 D: Port to the gw8260 board

+N: Curt Brune
+E: curt@cucy.com
+D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
+D: Added support for ESPD-Inc. EVB4510 Board
+W: http://www.cucy.com
+
 N: Jonathan De Bruyne
 E: jonathan.debruyne@siemens.atea.be
 D: Port to Siemens IAD210 board
@@ -78,6 +97,10 @@ N: Magnus Damm
 E: damm@opensource.se
 D: 8xxrom

+N: George G. Davis
+E: gdavis@mvista.com
+D: Board ports for ADS GraphicsClient+ and Intel Assabet
+
 N: Arun Dharankar
 E: ADharankar@ATTBI.Com
 D: threads / scheduler example code
@@ -183,6 +206,15 @@ N: Yoo. Jonghoon
 E: yooth@ipone.co.kr
 D: Added port to the RPXlite board

+N: Mark Jonas
+E: mark.jonas@freescale.com
+D: Support for Freescale Total5200 platform
+W: http://www.mobilegt.com/
+
+N: Sam Song
+E: samsongshu@yahoo.com.cn
+D: Port to the RPXlite_DW board
+
 N: Brad Kemp
 E: Brad.Kemp@seranoa.com
 D: Port to Windriver ppmc8260 board
@@ -191,6 +223,10 @@ N: Sangmoon Kim
 E: dogoil@etinsys.com
 D: Support for debris board

+N: Frederick W. Klatt
+E: fred.klatt@windriver.com
+D: Support for Wind River SBC8540/SBC8560 boards
+
 N: Thomas Koeller
 E: tkoeller@gmx.net
 D: Port to Motorola Sandpoint 3 (MPC8240)
@@ -204,6 +240,10 @@ N: Bernhard Kuhn
 E: bkuhn@metrowerks.com
 D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards

+N: Prakash Kumar
+E: prakash@embedx.com
+D  Support for Intrinsyc CERF PXA250 board.
+
 N: Thomas Lange
 E: thomas@corelatus.se
 D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes
@@ -216,6 +256,7 @@ W: http://www.leox.org
 N: Stephan Linz
 E: linz@li-pro.net
 D: Support for Nios Stratix Development Kit (DK-1S10)
+D: Support for SSV ADNP/ESC1 (Nios Cyclone)
 W: http://www.li-pro.net

 N: Raymond Lo
@@ -226,6 +267,11 @@ N: Dan Malek
 E: dan@netx4.com
 D: FADSROM, the grandfather of all of this

+N: Andrea "llandre" Marson
+E: andrea.marson@dave-tech.it
+D: Port to PPChameleonEVB board
+W: www.dave-tech.it
+
 N: Reinhard Meyer
 E: r.meyer@emk-elektronik.de
 D: Port to EMK TOP860 Module
@@ -244,13 +290,20 @@ D: Support for Samsung ARM920T SMDK2410 eval board

 N: Scott McNutt
 E: smcnutt@psyent.com
-D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20)
+D: Support for Altera Nios-32 CPU
+D: Support for Altera Nios-II CPU
+D: Support for Nios Cyclone Development Kit (DK-1C20)
+W: http://www.psyent.com

 N: Rolf Offermanns
 E: rof@sysgo.de
 D: Initial support for SSV-DNP1110, SMC91111 driver
 W: www.elinos.com

+N: Tolunay Orkun
+E: torkun@nextio.com
+D: Support for Cogent CSB272 & CSB472 boards
+
 N: Keith Outwater
 E: keith_outwater@mvis.com
 D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC)
@@ -265,10 +318,20 @@ D: Support for 4xx SCSI, floppy, CDROM, CT69000 video, ...
 D: Support for PIP405 board
 D: Support for MIP405 board

+N: Dave Peverley
+E: dpeverley@mpc-data.co.uk
+W: http://www.mpc-data.co.uk
+D: OMAP730 P2 board support
+
 N: Bill Pitts
 E: wlp@mindspring.com
 D: BedBug embedded debugger code

+N: Daniel Poirot
+E: dan.poirot@windriver.com
+D: Support for the sbc8240 board
+W: http://www.windriver.com
+
 N: Stefan Roese
 E: stefan.roese@esd-electronics.com
 D: IBM PPC401/403/405GP Support; Windows environment support
@@ -277,13 +340,17 @@ N: Erwin Rol
 E: erwin@muffin.org
 D: boot support for RTEMS

+N: Paul Ruhland
+E: pruhland@rochester.rr.com
+D: Port to Logic Zoom LH7A40x SDK board(s)
+
 N: Neil Russell
 E: caret@c-side.com
 D: Author of LiMon-1.4.2, which contributed some ideas

 N: Travis B. Sawyer
 E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.
+D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.  IBM 440gx Ref Platform (Ocotea)

 N: Paolo Scaffardi
 E: arsenio@tin.it
@@ -293,6 +360,19 @@ N: Robert Schwebel
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)

+N: Yasushi Shoji
+E: yashi@atmark-techno.com
+D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
+
+N: Kurt Stremerch
+E: kurt@exys.be
+D: Support for Exys XSEngine board
+
+N: Andrea Scian
+E: andrea.scian@dave-tech.it
+D: Port to B2 board
+W: www.dave-tech.it
+
 N: Rob Taylor
 E: robt@flyingpig.com
 D: Port to MBX860T and Sandpoint8240
@@ -313,13 +393,22 @@ N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions

+N: Christian Vejlbo
+E: christian.vejlbo@tellabs.com
+D: FADS860T ethernet support
+
 N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board

-N: Christian Vejlbo
-E: christian.vejlbo@tellabs.com
-D: FADS860T ethernet support
+N: Ming-Len Wu
+E: minglen_wu@techware.com.tw
+D: Motorola MX1ADS board support
+W: http://www.techware.com.tw/
+
+N: Xianghua Xiao
+E: x.xiao@motorola.com
+D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.

 N: John Zhan
 E: zhanz@sinovee.com
@@ -329,7 +418,3 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
-
-N: Xianghua Xiao
-E: x.xiao@motorola.com
-D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
--- a/87
+++ b/87
@@ -27,6 +27,9 @@ Pantelis Antoniou <panto@intracom.gr>

 Yuli Barcohen <yuli@arabellasw.com>

+	Adder			MPC87x/MPC852T
+	ISPAN			MPC8260
+	MPC8260ADS		MPC826x/MPC827x/MPC8280
 	ZPC1900			MPC8265

 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
@@ -55,13 +58,14 @@ Torsten Demke <torsten.demke@fci.com>

 Wolfgang Denk <wd@denx.de>

+	IceCube_5100		MGT5100
+	IceCube_5200		MPC5200
+
 	AMX860			MPC860
 	ETX094			MPC850
 	FPS850L			MPC850
 	FPS860L			MPC860
 	ICU862			MPC862
-	IceCube_5100		MGT5100
-	IceCube_5200		MPC5200
 	IP860			MPC860
 	IVML24			MPC860
 	IVML24_128		MPC860
@@ -71,6 +75,7 @@ Wolfgang Denk <wd@denx.de>
 	IVMS8_256		MPC860
 	LANTEC			MPC850
 	LWMON			MPC823
+	NC650			MPC852
 	R360MPI			MPC823
 	RMU			MPC850
 	RRvision		MPC823
@@ -97,7 +102,6 @@ Wolfgang Denk <wd@denx.de>
 	TQM8255			MPC8255

 	CPU86			MPC8260
-	PM825			MPC8250
 	PM826			MPC8260
 	TQM8260			MPC8260

@@ -146,6 +150,7 @@ Bill Hargen <Bill_Hargen@Jabil.com>
 Klaus Heydeck <heydeck@kieback-peter.de>

 	KUP4K			MPC855
+	KUP4X			MPC859

 Murray Jensen <Murray.Jensen@cmst.csiro.au>

@@ -162,10 +167,6 @@ Sangmoon Kim <dogoil@etinsys.com>

 	debris			MPC8245

-Raghu Krishnaprasad <raghu.krishnaprasad@fci.com>
-
-	ADDERII			MPC852T
-
 Nye Liu <nyet@zumanetworks.com>

 	ZUMA			MPC7xx_74xx
@@ -182,6 +183,10 @@ Eran Man <eran@nbase.co.il>

 	EVB64260_750CX		MPC750CX

+Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+
+	PPChameleonEVB	PPC405EP
+
 Reinhard Meyer <r.meyer@emk-elektronik.de>

 	TOP860			MPC860T
@@ -192,7 +197,8 @@ Scott McNutt <smcnutt@artesyncp.com>
 	EBONY			PPC440GP

 Tolunay Orkun <torkun@nextio.com>
-	csb272			PPC4xx
+	csb272			PPC405GP
+	csb472			PPC405GP

 Keith Outwater <Keith_Outwater@mvis.com>

@@ -230,6 +236,11 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 	PMC405			PPC405GP
 	VOH405			PPC405EP

+Travis Sawyer (travis.sawyer@sandburst.com>
+
+	XPEDITE1K		PPC440GX
+	OCOTEA			PPC440GX
+
 Peter De Schrijver <p2@mind.be>

 	ML2			PPC4xx
@@ -248,15 +259,28 @@ Rune Torgersen <runet@innovsys.com>

 	MPC8266ADS		MPC8266

+Josef Wagner <Wagner@Microsys.de>
+
+	CPC45			MPC8245
+	PM520			MPC5200
+
+Stephen Williams <steve@icarus.com>
+
+	JSE			PPC405GPr
+
 John Zhan <zhanz@sinovee.com>

 	svm_sc8xx		MPC8xx

-Xianghua Xiao <x.xiao@motorola.com>
+Jon Loeliger <jdl@freescale.com>

 	MPC8540ADS		MPC8540
 	MPC8560ADS		MPC8560

+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+
 -------------------------------------------------------------------------

 Unknown / orphaned boards:
@@ -279,7 +303,6 @@ Unknown / orphaned boards:

 	MOUSSE			MPC824x

-	MPC8260ADS		MPC8260
 	RPXsuper		MPC8260
 	rsdproto		MPC8260

@@ -293,6 +316,11 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################

+George G. Davis <gdavis@mvista.com>
+
+	assabet			SA1100
+	gcplus			SA1100
+
 Thomas Elste <info@elste.org>

 	modnet50		ARM720T (NET+50)
@@ -317,15 +345,26 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T

+Prakash Kumar <prakash@embedx.com>
+
+	cerf250			xscale
+
 Kshitij Gupta <kshitij@ti.com>

 	omap1510inn		ARM925T
 	omap1610inn		ARM926EJS

+Dave Peverley <dpeverley@mpc-data.co.uk>
+	omap730p2		ARM926EJS
+
 Nishant Kamat <nskamat@ti.com>

 	omap1610h2		ARM926EJS

+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
 David Müller <d.mueller@elsoft.ch>

 	smdk2410		ARM920T
@@ -340,6 +379,10 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 	csb226			xscale
 	innokom			xscale

+Andrea Scian <andrea.scian@dave-tech.it>
+
+	B2				ARM7TDMI (S3C44B0X)
+
 Alex Züpke <azu@sysgo.de>

 	lart			SA1100
@@ -381,11 +424,35 @@ Thomas Lange <thomas@corelatus.se>
 Stephan Linz <linz@li-pro.net>

 	DK1S10			Nios-32
+	ADNPESC1		Nios-32

 Scott McNutt <smcnutt@psyent.com>

 	DK1C20			Nios-32

+#########################################################################
+# Nios-II Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Scott McNutt <smcnutt@psyent.com>
+
+	PCI5441			Nios-II
+	PK1C20			Nios-II
+
+#########################################################################
+# MicroBlaze Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Yasushi Shoji <yashi@atmark-techno.com>
+
+	SUZAKU			MicroBlaze
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################
--- a/95
+++ b/95
@@ -25,7 +25,8 @@ LIST_5xx="	\
 #########################################################################

 LIST_5xxx="	\
-	IceCube_5100	IceCube_5200	EVAL5200	\
+	icecube_5100	icecube_5200	EVAL5200	PM520		\
+	Total5100	Total5200	Total5200_Rev2	TQM5200_AA	\
 "

 #########################################################################
@@ -33,22 +34,24 @@ LIST_5xxx="	\
 #########################################################################

 LIST_8xx="	\
-	AdderII		ADS860		AMX860		c2mon		\
-	CCM		cogent_mpc8xx	DUET_ADS	ESTEEM192E	\
-	ETX094		ELPT860		FADS823		FADS850SAR	\
-	FADS860T	FLAGADM		FPS850L		GEN860T		\
-	GEN860T_SC	GENIETV		GTH		hermes		\
-	IAD210		ICU862_100MHz	IP860		IVML24		\
-	IVML24_128	IVML24_256	IVMS8		IVMS8_128	\
-	IVMS8_256	KUP4K		LANTEC		lwmon		\
-	MBX		MBX860T		MHPC		MPC86xADS	\
-	MVS1		NETVIA		NETVIA_V2	NX823		\
-	pcu_e		QS823		QS850		QS860T		\
-	R360MPI		RBC823		rmu		RPXClassic	\
-	RPXlite		RRvision	SM850		SPD823TS	\
-	svm_sc8xx	SXNI855T	TOP860		TQM823L		\
-	TQM823L_LCD	TQM850L		TQM855L		TQM860L		\
-	v37								\
+	Adder87x	GENIETV		MBX860T		R360MPI		\
+	AdderII		GTH		MHPC		RBC823		\
+	ADS860		hermes		MPC86xADS	rmu		\
+	AMX860		IAD210		MPC885ADS	RPXClassic	\
+	c2mon		ICU862_100MHz	MVS1		RPXlite		\
+	CCM		IP860		NETPHONE	RPXlite_DW	\
+	cogent_mpc8xx	IVML24		NETTA		RRvision	\
+	ELPT860		IVML24_128	NETTA2		SM850		\
+	ESTEEM192E	IVML24_256	NETTA_ISDN	SPD823TS	\
+	ETX094		IVMS8		NETVIA		svm_sc8xx	\
+	FADS823		IVMS8_128	NETVIA_V2	SXNI855T	\
+	FADS850SAR	IVMS8_256	NX823		TOP860		\
+	FADS860T	KUP4K		pcu_e		TQM823L		\
+	FLAGADM		KUP4X		QS823		TQM823L_LCD	\
+	FPS850L		LANTEC		QS850		TQM850L		\
+	GEN860T		lwmon		QS860T		TQM855L		\
+	GEN860T_SC	MBX		quantum		TQM860L		\
+							v37		\
 "

 #########################################################################
@@ -59,12 +62,13 @@ LIST_4xx="	\
 	ADCIOP		AR405		ASH405		BUBINGA405EP	\
 	CANBT		CPCI405		CPCI4052	CPCI405AB	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
-	DASA_SIM	DP405		DU405		EBONY		\
-	ERIC		EXBITGEN	HUB405		MIP405		\
-	MIP405T		ML2		ml300		OCRTC		\
-	ORSG		PCI405		PIP405		PLU405		\
-	PMC405		PPChameleonEVB	VOH405		W7OLMC		\
-	W7OLMG		WALNUT405	XPEDITE1K			\
+	csb472		DASA_SIM	DP405		DU405		\
+	EBONY		ERIC		EXBITGEN	HUB405		\
+	JSE		MIP405		MIP405T		ML2		\
+	ml300		OCOTEA		OCRTC		ORSG		\
+	PCI405		PIP405		PLU405		PMC405		\
+	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
+	WALNUT405	XPEDITE1K					\
 "

 #########################################################################
@@ -75,7 +79,7 @@ LIST_824x="	\
 	A3000		BMW		CPC45		CU824		\
 	debris		eXalion		MOUSSE		MUSENKI		\
 	MVBLUE		OXC		PN62		Sandpoint8240	\
-	Sandpoint8245	SL8245		utx8245				\
+	Sandpoint8245	SL8245		utx8245		sbc8240	\
 "

 #########################################################################
@@ -84,8 +88,9 @@ LIST_824x="	\

 LIST_8260="	\
 	atc		cogent_mpc8260	CPU86		ep8260		\
-	gw8260		hymod		IPHASE4539	MPC8260ADS	\
-	MPC8266ADS	PM826		ppmc8260	RPXsuper	\
+	gw8260		hymod		IPHASE4539	ISPAN		\
+	MPC8260ADS	MPC8266ADS	MPC8272ADS	PM826		\
+	PM828		ppmc8260	PQ2FADS		RPXsuper	\
 	rsdproto	sacsng		sbc8260		SCM		\
 	TQM8260_AC	TQM8260_AD	TQM8260_AE	ZPC1900		\
 "
@@ -95,7 +100,8 @@ LIST_8260="	\
 #########################################################################

 LIST_85xx="	\
-	MPC8540ADS	MPC8560ADS					\
+	MPC8540ADS	MPC8541CDS	MPC8555CDS	MPC8560ADS	\
+	sbc8540		sbc8560		stxgp3				\
 "

 #########################################################################
@@ -122,29 +128,35 @@ LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
 ## StrongARM Systems
 #########################################################################

-LIST_SA="dnp1110 lart shannon"
+LIST_SA="assabet dnp1110 gcplus lart shannon"

 #########################################################################
 ## ARM7 Systems
 #########################################################################

-LIST_ARM7="B2 ep7312 impa7"
+LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"

 #########################################################################
 ## ARM9 Systems
 #########################################################################

 LIST_ARM9="	\
-	at91rm9200dk	omap1510inn	omap1610h2	omap1610inn	\
-	smdk2400	smdk2410	trab				\
-	VCMA9								\
+	at91rm9200dk	cmc_pu2		integratorcp	integratorap 	\
+	lpd7a400	mx1ads		mx1fs2		omap1510inn	\
+	omap1610h2	omap1610inn	omap730p2	scb9328		\
+	smdk2400	smdk2410	trab		VCMA9		\
+	versatile							\
 "

 #########################################################################
 ## Xscale Systems
 #########################################################################

-LIST_pxa="cradle csb226 innokom lubbock wepep250"
+LIST_pxa="	\
+	cerf250		cradle		csb226		innokom		\
+	lubbock		wepep250	xaeniax		xm250		\
+	xsengine							\
+"

 LIST_ixp="ixdp425"

@@ -176,10 +188,24 @@ LIST_x86="${LIST_I486}"
 #########################################################################

 LIST_nios="	\
+	ADNPESC1 ADNPESC1_base_32					\
+	ADNPESC1_DNPEVA2_base_32					\
 	DK1C20 DK1C20_standard_32					\
 	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
 "

+#########################################################################
+## Nios-II Systems
+#########################################################################
+
+LIST_nios2="PCI5441 PK1C20"
+
+#########################################################################
+## MicroBlaze Systems
+#########################################################################
+
+LIST_microblaze="suzaku"
+
 #-----------------------------------------------------------------------

 #----- for now, just run PPC by default -----
@@ -204,8 +230,9 @@ do
 	case "$arg" in
 	ppc|5xx|5xxx|8xx|824x|8260|85xx|4xx|7xx|74xx| \
 	arm|SA|ARM7|ARM9|pxa|ixp| \
+	microblaze| \
 	mips| \
-	nios| \
+	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do
--- a/677
+++ b/677
--- a/527
+++ b/527
@@ -25,9 +25,10 @@ Summary:
 ========

 This directory contains the source code for U-Boot, a boot loader for
-Embedded boards based on PowerPC and ARM processors, which can be
-installed in a boot ROM and used to initialize and test the hardware
-or to download and run application code.
+Embedded boards based on PowerPC, ARM, MIPS and several other
+processors, which can be installed in a boot ROM and used to
+initialize and test the hardware or to download and run application
+code.

 The development of U-Boot is closely related to Linux: some parts of
 the source code originate in the Linux source tree, we have some
@@ -125,6 +126,8 @@ Directory Hierarchy:
  - 74xx_7xx	Files specific to Motorola MPC74xx and 7xx CPUs
  - arm720t	Files specific to ARM 720 CPUs
  - arm920t	Files specific to ARM 920 CPUs
+    - imx	Files specific to Motorola MC9328 i.MX CPUs
+    - s3c24x0	Files specific to Samsung S3C24X0 CPUs
  - arm925t	Files specific to ARM 925 CPUs
  - arm926ejs	Files specific to ARM 926 CPUs
  - at91rm9200	Files specific to Atmel AT91RM9200 CPUs
@@ -139,6 +142,7 @@ Directory Hierarchy:
  - mpc8260	Files specific to Motorola MPC8260 CPUs
  - mpc85xx	Files specific to Motorola MPC85xx CPUs
  - nios	Files specific to Altera NIOS CPUs
+  - nios2	Files specific to Altera Nios-II CPUs
  - ppc4xx	Files specific to IBM PowerPC 4xx CPUs
  - pxa		Files specific to Intel XScale PXA CPUs
  - s3c44b0	Files specific to Samsung S3C44B0 CPUs
@@ -240,57 +244,78 @@ The following options need to be configured:
 		CONFIG_ARM7
 		CONFIG_PXA250

+		MicroBlaze based CPUs:
+		----------------------
+		CONFIG_MICROBLAZE
+
+		Nios-2 based CPUs:
+		----------------------
+		CONFIG_NIOS2
+

 - Board Type:	Define exactly one of

 		PowerPC based boards:
 		---------------------

-		CONFIG_ADCIOP,	   CONFIG_ICU862      CONFIG_RPXsuper,
-		CONFIG_ADS860,	   CONFIG_IP860,      CONFIG_SM850,
-		CONFIG_AMX860,	   CONFIG_IPHASE4539, CONFIG_SPD823TS,
-		CONFIG_AR405,	   CONFIG_IVML24,     CONFIG_SXNI855T,
-		CONFIG_BAB7xx,	   CONFIG_IVML24_128, CONFIG_Sandpoint8240,
-		CONFIG_CANBT,	   CONFIG_IVML24_256, CONFIG_Sandpoint8245,
-		CONFIG_CCM,	   CONFIG_IVMS8,      CONFIG_TQM823L,
-		CONFIG_CPCI405,	   CONFIG_IVMS8_128,  CONFIG_TQM850L,
-		CONFIG_CPCI4052,   CONFIG_IVMS8_256,  CONFIG_TQM855L,
-		CONFIG_CPCIISER4,  CONFIG_LANTEC,     CONFIG_TQM860L,
-		CONFIG_CPU86,	   CONFIG_MBX,	      CONFIG_TQM8260,
-		CONFIG_CRAYL1,	   CONFIG_MBX860T,    CONFIG_TTTech,
-		CONFIG_CU824,	   CONFIG_MHPC,	      CONFIG_UTX8245,
-		CONFIG_DASA_SIM,   CONFIG_MIP405,     CONFIG_W7OLMC,
-		CONFIG_DU405,	   CONFIG_MOUSSE,     CONFIG_W7OLMG,
-		CONFIG_ELPPC,	   CONFIG_MPC8260ADS, CONFIG_WALNUT405,
-		CONFIG_ERIC,	   CONFIG_MUSENKI,    CONFIG_ZUMA,
-		CONFIG_ESTEEM192E, CONFIG_MVS1,	      CONFIG_c2mon,
-		CONFIG_ETX094,	   CONFIG_NX823,      CONFIG_cogent_mpc8260,
-		CONFIG_EVB64260,   CONFIG_OCRTC,      CONFIG_cogent_mpc8xx,
-		CONFIG_FADS823,	   CONFIG_ORSG,	      CONFIG_ep8260,
-		CONFIG_FADS850SAR, CONFIG_OXC,	      CONFIG_gw8260,
-		CONFIG_FADS860T,   CONFIG_PCI405,     CONFIG_hermes,
-		CONFIG_FLAGADM,	   CONFIG_PCIPPC2,    CONFIG_hymod,
-		CONFIG_FPS850L,	   CONFIG_PCIPPC6,    CONFIG_lwmon,
-		CONFIG_GEN860T,	   CONFIG_PIP405,     CONFIG_pcu_e,
-		CONFIG_GENIETV,	   CONFIG_PM826,      CONFIG_ppmc8260,
-		CONFIG_GTH,	   CONFIG_RPXClassic, CONFIG_rsdproto,
-		CONFIG_IAD210,	   CONFIG_RPXlite,    CONFIG_sbc8260,
-		CONFIG_EBONY,	   CONFIG_sacsng,     CONFIG_FPS860L,
-		CONFIG_V37,	   CONFIG_ELPT860,    CONFIG_CMI,
-		CONFIG_NETVIA,	   CONFIG_RBC823,     CONFIG_ZPC1900,
-		CONFIG_MPC8540ADS, CONFIG_MPC8560ADS, CONFIG_QS850,
-		CONFIG_QS823,	   CONFIG_QS860T,     CONFIG_DB64360,
-		CONFIG_DB64460,	   CONFIG_DUET_ADS
+		CONFIG_ADCIOP		CONFIG_GEN860T		CONFIG_PCI405
+		CONFIG_ADS860		CONFIG_GENIETV		CONFIG_PCIPPC2
+		CONFIG_AMX860		CONFIG_GTH		CONFIG_PCIPPC6
+		CONFIG_AR405		CONFIG_gw8260		CONFIG_pcu_e
+		CONFIG_BAB7xx		CONFIG_hermes		CONFIG_PIP405
+		CONFIG_c2mon		CONFIG_hymod		CONFIG_PM826
+		CONFIG_CANBT		CONFIG_IAD210		CONFIG_ppmc8260
+		CONFIG_CCM		CONFIG_ICU862		CONFIG_QS823
+		CONFIG_CMI		CONFIG_IP860		CONFIG_QS850
+		CONFIG_cogent_mpc8260	CONFIG_IPHASE4539	CONFIG_QS860T
+		CONFIG_cogent_mpc8xx	CONFIG_IVML24		CONFIG_RBC823
+		CONFIG_CPCI405		CONFIG_IVML24_128	CONFIG_RPXClassic
+		CONFIG_CPCI4052		CONFIG_IVML24_256	CONFIG_RPXlite
+		CONFIG_CPCIISER4	CONFIG_IVMS8		CONFIG_RPXsuper
+		CONFIG_CPU86		CONFIG_IVMS8_128	CONFIG_rsdproto
+		CONFIG_CRAYL1		CONFIG_IVMS8_256	CONFIG_sacsng
+		CONFIG_CSB272		CONFIG_JSE		CONFIG_Sandpoint8240
+		CONFIG_CU824		CONFIG_LANTEC		CONFIG_Sandpoint8245
+		CONFIG_DASA_SIM		CONFIG_lwmon		CONFIG_sbc8260
+		CONFIG_DB64360		CONFIG_MBX		CONFIG_sbc8560
+		CONFIG_DB64460		CONFIG_MBX860T		CONFIG_SM850
+		CONFIG_DU405		CONFIG_MHPC		CONFIG_SPD823TS
+		CONFIG_DUET_ADS		CONFIG_MIP405		CONFIG_STXGP3
+		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
+		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
+		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
+		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
+		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
+		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
+		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
+		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
+		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
+		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
+		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
+		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
+		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
+		CONFIG_FPS860L					CONFIG_ZUMA

 		ARM based boards:
 		-----------------

-		CONFIG_HHP_CRADLE,  CONFIG_DNP1110,	CONFIG_EP7312,
-		CONFIG_IMPA7,	    CONFIG_LART,	CONFIG_LUBBOCK,
-		CONFIG_INNOVATOROMAP1510,      CONFIG_INNOVATOROMAP1610,
-		CONFIG_H2_OMAP1610, CONFIG_SHANNON,	CONFIG_SMDK2400,
-		CONFIG_SMDK2410,    CONFIG_TRAB,	CONFIG_VCMA9,
-		CONFIG_AT91RM9200DK
+		CONFIG_AT91RM9200DK,		CONFIG_CERF250,		CONFIG_DNP1110,
+		CONFIG_EP7312,			CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
+		CONFIG_LART,			CONFIG_LPD7A400		CONFIG_LUBBOCK,
+		CONFIG_OSK_OMAP5912,		CONFIG_SHANNON,		CONFIG_P2_OMAP730,
+		CONFIG_SMDK2400,		CONFIG_SMDK2410,	CONFIG_TRAB,
+		CONFIG_VCMA9
+
+		MicroBlaze based boards:
+		------------------------
+
+		CONFIG_SUZAKU
+
+		Nios-2 based boards:
+		------------------------
+
+		CONFIG_PCI5441 CONFIG_PK1C20


 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -320,23 +345,24 @@ The following options need to be configured:
 			CFG_8260ADS	- original MPC8260ADS
 			CFG_8266ADS	- MPC8266ADS
 			CFG_PQ2FADS	- PQ2FADS-ZU or PQ2FADS-VR
-
+			CFG_8272ADS	- MPC8272ADS

 - MPC824X Family Member (if CONFIG_MPC824X is defined)
 		Define exactly one of
 		CONFIG_MPC8240, CONFIG_MPC8245

 - 8xx CPU Options: (if using an MPC8xx cpu)
-		Define one or more of
-		CONFIG_8xx_GCLK_FREQ	- if get_gclk_freq() cannot work
+		CONFIG_8xx_GCLK_FREQ	- deprecated: CPU clock if
+					  get_gclk_freq() cannot work
 					  e.g. if there is no 32KHz
 					  reference PIT/RTC clock
+		CONFIG_8xx_OSCLK	- PLL input clock (either EXTCLK
+					  or XTAL/EXTAL)

- 859/866 CPU options: (if using a MPC859 or MPC866 CPU):
-		CFG_866_OSCCLK
-		CFG_866_CPUCLK_MIN
-		CFG_866_CPUCLK_MAX
-		CFG_866_CPUCLK_DEFAULT
+- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
+		CFG_8xx_CPUCLK_MIN
+		CFG_8xx_CPUCLK_MAX
+		CONFIG_8xx_CPUCLK_DEFAULT
 			See doc/README.MPC866

 		CFG_MEASURE_CPUCLK
@@ -346,7 +372,7 @@ The following options need to be configured:
 		values. Mostly useful for board bringup to make sure
 		the PLL is locked at the intended frequency. Note
 		that this requires a (stable) reference clock (32 kHz
-		RTC clock),
+		RTC clock or CFG_8XX_XIN)

 - Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ
@@ -368,6 +394,27 @@ The following options need to be configured:
 		expect it to be in bytes, others in MB.
 		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.

+- Serial Ports:
+		CFG_PL010_SERIAL
+
+		Define this if you want support for Amba PrimeCell PL010 UARTs.
+
+		CFG_PL011_SERIAL
+
+		Define this if you want support for Amba PrimeCell PL011 UARTs.
+
+		CONFIG_PL011_CLOCK
+
+		If you have Amba PrimeCell PL011 UARTs, set this variable to
+		the clock speed of the UARTs.
+
+		CONFIG_PL01x_PORTS
+
+		If you have Amba PrimeCell PL010 or PL011 UARTs on your board,
+		define this to a list of base addresses for each (supported)
+		port. See e.g. include/configs/versatile.h
+
+
 - Console Interface:
 		Depending on board, define exactly one serial port
 		(like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
@@ -441,8 +488,8 @@ The following options need to be configured:
 		(RTS/CTS) and UART's built-in FIFO. Set the number of
 		bytes the interrupt driven input buffer should have.

-		Set to 0 to disable this feature (this is the default).
-		This will also disable hardware handshake.
+		Leave undefined to disable this feature, including
+		disable the buffer and hardware handshake.

 - Console UART Number:
 		CONFIG_UART1_CONSOLE
@@ -529,22 +576,23 @@ The following options need to be configured:
 		CFG_CMD_ASKENV	* ask for env variable
 		CFG_CMD_AUTOSCRIPT Autoscript Support
 		CFG_CMD_BDI	  bdinfo
-		CFG_CMD_BEDBUG	  Include BedBug Debugger
+		CFG_CMD_BEDBUG	* Include BedBug Debugger
 		CFG_CMD_BMP	* BMP support
+		CFG_CMD_BSP	* Board specific commands
 		CFG_CMD_BOOTD	  bootd
-		CFG_CMD_CACHE	  icache, dcache
+		CFG_CMD_CACHE	* icache, dcache
 		CFG_CMD_CONSOLE	  coninfo
 		CFG_CMD_DATE	* support for RTC, date/time...
-		CFG_CMD_DHCP	  DHCP support
+		CFG_CMD_DHCP	* DHCP support
 		CFG_CMD_DIAG	* Diagnostics
 		CFG_CMD_DOC	* Disk-On-Chip Support
-		CFG_CMD_DTT	  Digital Therm and Thermostat
+		CFG_CMD_DTT	* Digital Therm and Thermostat
 		CFG_CMD_ECHO	* echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
-		CFG_CMD_ELF	  bootelf, bootvx
+		CFG_CMD_ELF	* bootelf, bootvx
 		CFG_CMD_ENV	  saveenv
 		CFG_CMD_FDC	* Floppy Disk Support
-		CFG_CMD_FAT	  FAT partition support
+		CFG_CMD_FAT	* FAT partition support
 		CFG_CMD_FDOS	* Dos diskette Support
 		CFG_CMD_FLASH	  flinfo, erase, protect
 		CFG_CMD_FPGA	  FPGA device initialization support
@@ -555,16 +603,16 @@ The following options need to be configured:
 		CFG_CMD_IMLS	  List all found images
 		CFG_CMD_IMMAP	* IMMR dump support
 		CFG_CMD_IRQ	* irqinfo
-		CFG_CMD_ITEST	* Integer/string test of 2 values
+		CFG_CMD_ITEST	  Integer/string test of 2 values
 		CFG_CMD_JFFS2	* JFFS2 Support
 		CFG_CMD_KGDB	* kgdb
 		CFG_CMD_LOADB	  loadb
 		CFG_CMD_LOADS	  loads
 		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
-				  loop, mtest
+				  loop, loopw, mtest
 		CFG_CMD_MISC	  Misc functions like sleep etc
-		CFG_CMD_MMC	  MMC memory mapped support
-		CFG_CMD_MII	  MII utility commands
+		CFG_CMD_MMC	* MMC memory mapped support
+		CFG_CMD_MII	* MII utility commands
 		CFG_CMD_NAND	* NAND support
 		CFG_CMD_NET	  bootp, tftpboot, rarpboot
 		CFG_CMD_PCI	* pciinfo
@@ -573,7 +621,7 @@ The following options need to be configured:
 		CFG_CMD_PORTIO	* Port I/O
 		CFG_CMD_REGINFO * Register dump
 		CFG_CMD_RUN	  run command in env variable
-		CFG_CMD_SAVES	  save S record dump
+		CFG_CMD_SAVES	* save S record dump
 		CFG_CMD_SCSI	* SCSI Support
 		CFG_CMD_SDRAM	* print SDRAM configuration information
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
@@ -581,16 +629,17 @@ The following options need to be configured:
 		CFG_CMD_USB	* USB support
 		CFG_CMD_VFD	* VFD support (TRAB)
 		CFG_CMD_BSP	* Board SPecific functions
+		CFG_CMD_CDP	* Cisco Discover Protocol support
 		-----------------------------------------------
 		CFG_CMD_ALL	all

-		CFG_CMD_DFL	Default configuration; at the moment
+		CONFIG_CMD_DFL	Default configuration; at the moment
 				this is includes all commands, except
 				the ones marked with "*" in the list
 				above.

 		If you don't define CONFIG_COMMANDS it defaults to
-		CFG_CMD_DFL in include/cmd_confdefs.h. A board can
+		CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can
 		override the default settings in the respective
 		include file.

@@ -640,6 +689,7 @@ The following options need to be configured:
 		CONFIG_RTC_DS1337	- use Maxim, Inc. DS1337 RTC
 		CONFIG_RTC_DS1338	- use Maxim, Inc. DS1338 RTC
 		CONFIG_RTC_DS164x	- use Dallas DS164x RTC
+		CONFIG_RTC_MAX6900	- use Maxim, Inc. MAX6900 RTC

 		Note that if the RTC uses I2C, then the I2C interface
 		must also be configured. See I2C Support, below.
@@ -660,16 +710,31 @@ The following options need to be configured:
 		one partition type as well.

 - IDE Reset method:
-		CONFIG_IDE_RESET_ROUTINE
+		CONFIG_IDE_RESET_ROUTINE - this is defined in several
+		board configurations files but used nowhere!

-		Set this to define that instead of a reset Pin, the
-		routine ide_set_reset(int idereset) will be used.
+		CONFIG_IDE_RESET - is this is defined, IDE Reset will
+		be performed by calling the function
+			ide_set_reset(int reset)
+		which has to be defined in a board specific file

 - ATAPI Support:
 		CONFIG_ATAPI

 		Set this to enable ATAPI support.

+- LBA48 Support
+		CONFIG_LBA48
+
+		Set this to enable support for disks larger than 137GB
+		Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL
+		Whithout these , LBA48 support uses 32bit variables and will 'only'
+		support disks up to 2.1TB.
+
+		CFG_64BIT_LBA:
+			When enabled, makes the IDE subsystem use 64bit sector addresses.
+			Default is 32bit.
+
 - SCSI Support:
 		At the moment only there is only support for the
 		SYM53C8XX SCSI controller; define
@@ -714,16 +779,37 @@ The following options need to be configured:
 			CONFIG_LAN91C96_USE_32_BIT
 			Define this to enable 32 bit addressing

+		CONFIG_DRIVER_SMC91111
+		Support for SMSC's LAN91C111 chip
+
+			CONFIG_SMC91111_BASE
+			Define this to hold the physical address
+			of the device (I/O space)
+
+			CONFIG_SMC_USE_32_BIT
+			Define this if data bus is 32 bits
+
+			CONFIG_SMC_USE_IOFUNCS
+			Define this to use i/o functions instead of macros
+			(some hardware wont work with macros)
+
 - USB Support:
 		At the moment only the UHCI host controller is
-		supported (PIP405, MIP405); define
+		supported (PIP405, MIP405, MPC5200); define
 		CONFIG_USB_UHCI to enable it.
 		define CONFIG_USB_KEYBOARD to enable the USB Keyboard
-		end define CONFIG_USB_STORAGE to enable the USB
+		and define CONFIG_USB_STORAGE to enable the USB
 		storage devices.
 		Note:
 		Supported are USB Keyboards and USB Floppy drives
 		(TEAC FD-05PUB).
+		MPC5200 USB requires additional defines:
+			CONFIG_USB_CLOCK
+				for 528 MHz Clock: 0x0001bbbb
+			CONFIG_USB_CONFIG
+				for differential drivers: 0x00001000
+				for single ended drivers: 0x00005000
+

 - MMC Support:
 		The MMC controller on the Intel PXA is supported. To
@@ -733,6 +819,24 @@ The following options need to be configured:
 		enabled with CFG_CMD_MMC. The MMC driver also works with
 		the FAT fs. This is enabled with CFG_CMD_FAT.

+- Journaling Flash filesystem support:
+		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
+		CONFIG_JFFS2_NAND_DEV
+		Define these for a default partition on a NAND device
+
+		CFG_JFFS2_FIRST_SECTOR,
+		CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS
+		Define these for a default partition on a NOR device
+
+		CFG_JFFS_CUSTOM_PART
+		Define this to create an own partition. You have to provide a
+		function struct part_info* jffs2_part_info(int part_num)
+
+		If you define only one JFFS2 partition you may also want to
+		#define CFG_JFFS_SINGLE_PART    1
+		to disable the command chpart. This is the default when you
+		have not defined a custom partition
+
 - Keyboard Support:
 		CONFIG_ISA_KEYBOARD

@@ -756,17 +860,30 @@ The following options need to be configured:
 		Enable Chips & Technologies 69000 Video chip

 		CONFIG_VIDEO_SMI_LYNXEM
-		Enable Silicon Motion SMI 712/710/810 Video chip
-		Videomode are selected via environment 'videomode' with
-		standard LiLo mode numbers.
-		Following modes are supported  (* is default):
+		Enable Silicon Motion SMI 712/710/810 Video chip. The
+		video output is selected via environment 'videoout'
+		(1 = LCD and 2 = CRT). If videoout is undefined, CRT is
+		assumed.

-			    800x600  1024x768  1280x1024
-	      256  (8bit)     303*	305	  307
-	    65536 (16bit)     314	317	  31a
-	16,7 Mill (24bit)     315	318	  31b
+		For the CT69000 and SMI_LYNXEM drivers, videomode is
+		selected via environment 'videomode'. Two diferent ways
+		are possible:
+		- "videomode=num"   'num' is a standard LiLo mode numbers.
+		Following standard modes are supported	(* is default):
+
+		      Colors	640x480 800x600 1024x768 1152x864 1280x1024
+		-------------+---------------------------------------------
+		      8 bits |	0x301*	0x303	 0x305	  0x161	    0x307
+		     15 bits |	0x310	0x313	 0x316	  0x162	    0x319
+		     16 bits |	0x311	0x314	 0x317	  0x163	    0x31A
+		     24 bits |	0x312	0x315	 0x318	    ?	    0x31B
+		-------------+---------------------------------------------
 		(i.e. setenv videomode 317; saveenv; reset;)

+		- "videomode=bootargs" all the video parameters are parsed
+		from the bootargs. (See drivers/videomodes.c)
+
+
 		CONFIG_VIDEO_SED13806
 		Enable Epson SED13806 driver. This driver supports 8bpp
 		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
@@ -833,7 +950,7 @@ The following options need to be configured:
 		If this option is set, the environment is checked for
 		a variable "splashimage". If found, the usual display
 		of logo, copyright and system information on the LCD
-		is supressed and the BMP image at the address
+		is suppressed and the BMP image at the address
 		specified in "splashimage" is loaded instead. The
 		console is redirected to the "nulldev", too. This
 		allows for a "silent" boot where a splash screen is
@@ -850,6 +967,32 @@ The following options need to be configured:
 		the malloc area (as defined by CFG_MALLOC_LEN) should
 		be at least 4MB.

+- MII/PHY support:
+		CONFIG_PHY_ADDR
+
+		The address of PHY on MII bus.
+
+		CONFIG_PHY_CLOCK_FREQ (ppc4xx)
+
+		The clock frequency of the MII bus
+
+		CONFIG_PHY_GIGE
+
+		If this option is set, support for speed/duplex
+		detection of Gigabit PHY is included.
+
+		CONFIG_PHY_RESET_DELAY
+
+		Some PHY like Intel LXT971A need extra delay after
+		reset before any MII register access is possible.
+		For such PHY, set this option to the usec delay
+		required. (minimum 300usec for LXT971A)
+
+		CONFIG_PHY_CMD_DELAY (ppc4xx)
+
+		Some PHY like Intel LXT971A need extra delay after
+		command issued before MII status register can be read
+
 - Ethernet address:
 		CONFIG_ETHADDR
 		CONFIG_ETH2ADDR
@@ -914,6 +1057,48 @@ The following options need to be configured:
 		environment variable is passed as option 12 to
 		the DHCP server.

+ - CDP Options:
+		CONFIG_CDP_DEVICE_ID
+
+		The device id used in CDP trigger frames.
+
+		CONFIG_CDP_DEVICE_ID_PREFIX
+
+		A two character string which is prefixed to the MAC address
+		of the device.
+
+		CONFIG_CDP_PORT_ID
+
+		A printf format string which contains the ascii name of
+		the port. Normally is set to "eth%d" which sets
+		eth0 for the first ethernet, eth1 for the second etc.
+
+		CONFIG_CDP_CAPABILITIES
+
+		A 32bit integer which indicates the device capabilities;
+		0x00000010 for a normal host which does not forwards.
+
+		CONFIG_CDP_VERSION
+
+		An ascii string containing the version of the software.
+
+		CONFIG_CDP_PLATFORM
+
+		An ascii string containing the name of the platform.
+
+		CONFIG_CDP_TRIGGER
+
+		A 32bit integer sent on the trigger.
+
+		CONFIG_CDP_POWER_CONSUMPTION
+
+		A 16bit integer containing the power consumption of the
+		device in .1 of milliwatts.
+
+		CONFIG_CDP_APPLIANCE_VLAN_TYPE
+
+		A byte containing the id of the VLAN.
+
 - Status LED:	CONFIG_STATUS_LED

 		Several configurations allow to display the current
@@ -1042,6 +1227,12 @@ The following options need to be configured:
 		custom i2c_init_board() routine in boards/xxx/board.c
 		is run early in the boot sequence.

+		CONFIG_I2CFAST (PPC405GP|PPC405EP only)
+
+		This option enables configuration of bi_iic_fast[] flags
+		in u-boot bd_info structure based on u-boot environment
+		variable "i2cfast". (see also i2cfast)
+
 - SPI Support:	CONFIG_SPI

 		Enables SPI driver (so far only tested with
@@ -1196,6 +1387,10 @@ The following options need to be configured:
 		default value of 5 is used.

 - Command Interpreter:
+		CFG_AUTO_COMPLETE
+
+		Enable auto completion of commands using TAB.
+
 		CFG_HUSH_PARSER

 		Define this variable to enable the "hush" shell (from
@@ -1660,6 +1855,17 @@ to save the current settings.
 	  The length in bytes of the EEPROM memory array address.  Note
 	  that this is NOT the chip address length!

+	- CFG_I2C_EEPROM_ADDR_OVERFLOW:
+	  EEPROM chips that implement "address overflow" are ones
+	  like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+	  address and the extra bits end up in the "chip address" bit
+	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
+	  byte chips.
+
+	  Note that we consider the length of the address field to
+	  still be one byte because the extra address bits are hidden
+	  in the chip address.
+
 	- CFG_EEPROM_SIZE:
 	  The size in bytes of the EEPROM device.

@@ -1677,6 +1883,16 @@ to save the current settings.
 	  environment area within the total memory of your DataFlash placed
 	  at the specified address.

+- CFG_ENV_IS_IN_NAND:
+
+	Define this if you have a NAND device which you want to use
+	for the environment.
+
+	- CFG_ENV_OFFSET:
+	- CFG_ENV_SIZE:
+
+	  These two #defines specify the offset and size of the environment
+	  area within the first NAND device.

 - CFG_SPI_INIT_OFFSET

@@ -1713,6 +1929,13 @@ use the "saveenv" command to store a valid environment.
 - CFG_FAULT_MII_ADDR:
 		MII address of the PHY to check for the Ethernet link state.

+- CFG_64BIT_VSPRINTF:
+		Makes vsprintf (and all *printf functions) support printing
+		of 64bit values by using the L quantifier
+
+- CFG_64BIT_STRTOUL:
+		Adds simple_strtoull that returns a 64bit value
+
 Low Level (hardware related) configuration options:
 ---------------------------------------------------

@@ -1854,6 +2077,40 @@ Low Level (hardware related) configuration options:
  CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
 		Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.

+- CONFIG_ETHER_ON_FEC[12]
+		Define to enable FEC[12] on a 8xx series processor.
+
+- CONFIG_FEC[12]_PHY
+		Define to the hardcoded PHY address which corresponds
+		to the given FEC; i. e.
+			#define CONFIG_FEC1_PHY 4
+		means that the PHY with address 4 is connected to FEC1
+
+		When set to -1, means to probe for first available.
+
+- CONFIG_FEC[12]_PHY_NORXERR
+		The PHY does not have a RXERR line (RMII only).
+		(so program the FEC to ignore it).
+
+- CONFIG_RMII
+		Enable RMII mode for all FECs.
+		Note that this is a global option, we can't
+		have one FEC in standard MII mode and another in RMII mode.
+
+- CONFIG_CRC32_VERIFY
+		Add a verify option to the crc32 command.
+		The syntax is:
+
+		=> crc32 -v <address> <count> <crc32>
+
+		Where address/count indicate a memory area
+		and crc32 is the correct crc32 which the
+		area should have.
+
+- CONFIG_LOOPW
+		Add the "loopw" memory command. This only takes effect if
+		the memory commands are activated globally (CFG_CMD_MEM).
+
 Building the Software:
 ======================

@@ -1881,54 +2138,43 @@ is done by typing:
 where "NAME_config" is the name of one of the existing
 configurations; the following names are supported:

-    ADCIOP_config	  GTH_config		TQM850L_config
-    ADS860_config	  IP860_config		TQM855L_config
-    AR405_config	  IVML24_config		TQM860L_config
-    CANBT_config	  IVMS8_config		WALNUT405_config
-    CPCI405_config	  LANTEC_config		cogent_common_config
-    CPCIISER4_config	  MBX_config		cogent_mpc8260_config
-    CU824_config	  MBX860T_config	cogent_mpc8xx_config
-    ESTEEM192E_config	  RPXlite_config	hermes_config
-    ETX094_config	  RPXsuper_config	hymod_config
-    FADS823_config	  SM850_config		lwmon_config
-    FADS850SAR_config	  SPD823TS_config	pcu_e_config
-    FADS860T_config	  SXNI855T_config	rsdproto_config
-    FPS850L_config	  Sandpoint8240_config	sbc8260_config
-    GENIETV_config	  TQM823L_config	PIP405_config
-    GEN860T_config	  EBONY_config		FPS860L_config
-    ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
-    at91rm9200dk_config	  omap1510inn_config	MPC8260ADS_config
-    omap1610inn_config	  ZPC1900_config	MPC8540ADS_config
-    MPC8560ADS_config	  QS850_config		QS823_config
-    QS860T_config	  DUET_ADS_config	omap1610h2_config
+	ADCIOP_config		FPS860L_config		omap730p2_config
+	ADS860_config		GEN860T_config		pcu_e_config
+	AR405_config		GENIETV_config		PIP405_config
+	at91rm9200dk_config	GTH_config		QS823_config
+	CANBT_config		hermes_config		QS850_config
+	cmi_mpc5xx_config	hymod_config		QS860T_config
+	cogent_common_config	IP860_config		RPXlite_config
+	cogent_mpc8260_config	IVML24_config		RPXlite_DW_config
+	cogent_mpc8xx_config	IVMS8_config		RPXsuper_config
+	CPCI405_config		JSE_config		rsdproto_config
+	CPCIISER4_config	LANTEC_config		Sandpoint8240_config
+	csb272_config		lwmon_config		sbc8260_config
+	CU824_config		MBX860T_config		sbc8560_33_config
+	DUET_ADS_config		MBX_config		sbc8560_66_config
+	EBONY_config		MPC8260ADS_config	SM850_config
+	ELPT860_config		MPC8540ADS_config	SPD823TS_config
+	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
+	ETX094_config		NETVIA_config		SXNI855T_config
+	FADS823_config		omap1510inn_config	TQM823L_config
+	FADS850SAR_config	omap1610h2_config	TQM850L_config
+	FADS860T_config		omap1610inn_config	TQM855L_config
+	FPS850L_config		omap5912osk_config	TQM860L_config
+							WALNUT405_config
+							ZPC1900_config

-Note: for some board special configuration names may exist; check  if
-      additional  information is available from the board vendor; for
-      instance, the TQM8xxL systems run normally at 50 MHz and use  a
-      SCC  for	10baseT	 ethernet; there are also systems with 80 MHz
-      CPU clock, and an optional Fast Ethernet	module	is  available
-      for  CPU's  with FEC. You can select such additional "features"
+Note: for some board special configuration names may exist; check if
+      additional information is available from the board vendor; for
+      instance, the TQM823L systems are available without (standard)
+      or with LCD support. You can select such additional "features"
      when chosing the configuration, i. e.

-      make TQM860L_config
-	- will configure for a plain TQM860L, i. e. 50MHz, no FEC
-
-      make TQM860L_FEC_config
-	- will configure for a TQM860L at 50MHz with FEC for ethernet
-
-      make TQM860L_80MHz_config
-	- will configure for a TQM860L at 80 MHz, with normal 10baseT
-	  interface
-
-      make TQM860L_FEC_80MHz_config
-	- will configure for a TQM860L at 80 MHz with FEC for ethernet
+      make TQM823L_config
+	- will configure for a plain TQM823L, i. e. no LCD support

      make TQM823L_LCD_config
 	- will configure for a TQM823L with U-Boot console on LCD

-      make TQM823L_LCD_80MHz_config
-	- will configure for a TQM823L at 80 MHz with U-Boot console on LCD
-
      etc.


@@ -2037,6 +2283,7 @@ iminfo	- print header information for application image
 coninfo - print console devices and informations
 ide	- IDE sub-system
 loop	- infinite loop on address range
+loopw	- infinite write loop on address range
 mtest	- simple RAM test
 icache	- enable or disable instruction cache
 dcache	- enable or disable data cache
@@ -2096,6 +2343,12 @@ Some configuration options can be set using Environment Variables:
 		  This can be used to load and uncompress arbitrary
 		  data.

+  i2cfast	- (PPC405GP|PPC405EP only)
+		  if set to 'y' configures Linux I2C driver for fast
+		  mode (400kHZ). This environment variable is used in
+		  initialization code. So, for changes to be effective
+		  it must be saved and board must be reset.
+
  initrd_high	- restrict positioning of initrd images:
 		  If this variable is not set, initrd images will be
 		  copied to the highest possible address in RAM; this
@@ -2140,6 +2393,29 @@ Some configuration options can be set using Environment Variables:

  bootstopkey	- see CONFIG_AUTOBOOT_STOP_STR

+  ethprime	- When CONFIG_NET_MULTI is enabled controls which
+		  interface is used first.
+
+  ethact	- When CONFIG_NET_MULTI is enabled controls which
+		  interface is currently active. For example you
+		  can do the following
+
+		  => setenv ethact FEC ETHERNET
+		  => ping 192.168.0.1 # traffic sent on FEC ETHERNET
+		  => setenv ethact SCC ETHERNET
+		  => ping 10.0.0.1 # traffic sent on SCC ETHERNET
+
+   netretry	- When set to "no" each network operation will
+		  either succeed or fail without retrying.
+		  When set to "once" the network operation will
+		  fail when all the available network interfaces
+		  are tried once without success.
+		  Useful on scripts which control the retry operation
+		  themselves.
+
+   vlan		- When set to a value < 4095 the traffic over
+		  ethernet is encapsulated/received over 802.1q
+		  VLAN tagged frames.

 The following environment variables may be used and automatically
 updated by the network boot commands ("bootp" and "rarpboot"),
@@ -2406,8 +2682,9 @@ from a "data file" which is used as image payload:
 	  -n ==> set image name to 'name'
 	  -d ==> use image data from 'datafile'

-Right now, all Linux kernels use the same load address	(0x00000000),
-but the entry point address depends on the kernel version:
+Right now, all Linux kernels for PowerPC systems use the same load
+address (0x00000000), but the entry point address depends on the
+kernel version:

 - 2.2.x kernels have the entry point at 0x0000000C,
 - 2.3.x and later kernels have the entry point at 0x00000000.
--- a/board/AtmarkTechno/suzaku/Makefile
+++ b/board/AtmarkTechno/suzaku/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2003
+# (C) Copyright 2003
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
--- a/board/AtmarkTechno/suzaku/config.mk
+++ b/board/AtmarkTechno/suzaku/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2004 Atmark Techno, Inc.
+#
+# Yasushi SHOJI <yashi@atmark-techno.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x80F00000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
--- a/board/AtmarkTechno/suzaku/flash.c
+++ b/board/AtmarkTechno/suzaku/flash.c
@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+unsigned long flash_init(void)
+{
+	return 0;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+}
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	return 0;
+}
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	return 0;
+}
--- a/board/AtmarkTechno/suzaku/suzaku.c
+++ b/board/AtmarkTechno/suzaku/suzaku.c
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This is a board specific file.  It's OK to include board specific
+ * header files */
+#include <asm/suzaku.h>
+
+void do_reset(void)
+{
+	*((unsigned long *)(MICROBLAZE_SYSREG_BASE_ADDR)) = MICROBLAZE_SYSREG_RECONFIGURE;
+}
--- a/board/AtmarkTechno/suzaku/u-boot.lds
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text ALIGN(0x4):
+	{
+		__text_start = .;
+		cpu/microblaze/start.o (.text)
+		*(.text)
+		__text_end = .;
+	}
+
+	.rodata ALIGN(0x4):
+	{
+		__rodata_start = .;
+		*(.rodata)
+		__rodata_end = .;
+	}
+
+	.data ALIGN(0x4):
+	{
+		__data_start = .;
+		*(.data)
+		__data_end = .;
+	}
+
+	.u_boot_cmd ALIGN(0x4):
+	{
+		__u_boot_cmd_start = .;
+		*(.u_boot_cmd)
+		__u_boot_cmd_end = .;
+	}
+
+	.bss ALIGN(0x4):
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_start = .;
+	}
+}
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -549,18 +549,18 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 #if defined (CFG_DRAM_TEST_DATA)

 unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaa,
-	0xcccccccccccccccc,
-	0xf0f0f0f0f0f0f0f0,
-	0xff00ff00ff00ff00,
-	0xffff0000ffff0000,
-	0xffffffff00000000,
-	0x00000000ffffffff,
-	0x0000ffff0000ffff,
-	0x00ff00ff00ff00ff,
-	0x0f0f0f0f0f0f0f0f,
-	0x3333333333333333,
-	0x5555555555555555
+	0xaaaaaaaaaaaaaaaaULL,
+	0xccccccccccccccccULL,
+	0xf0f0f0f0f0f0f0f0ULL,
+	0xff00ff00ff00ff00ULL,
+	0xffff0000ffff0000ULL,
+	0xffffffff00000000ULL,
+	0x00000000ffffffffULL,
+	0x0000ffff0000ffffULL,
+	0x00ff00ff00ff00ffULL,
+	0x0f0f0f0f0f0f0f0fULL,
+	0x3333333333333333ULL,
+	0x5555555555555555ULL,
 };

 /*********************************************************************/
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -549,18 +549,18 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 #if defined (CFG_DRAM_TEST_DATA)

 unsigned long long pattern[] = {
-	0xaaaaaaaaaaaaaaaa,
-	0xcccccccccccccccc,
-	0xf0f0f0f0f0f0f0f0,
-	0xff00ff00ff00ff00,
-	0xffff0000ffff0000,
-	0xffffffff00000000,
-	0x00000000ffffffff,
-	0x0000ffff0000ffff,
-	0x00ff00ff00ff00ff,
-	0x0f0f0f0f0f0f0f0f,
-	0x3333333333333333,
-	0x5555555555555555
+	0xaaaaaaaaaaaaaaaaULL,
+	0xccccccccccccccccULL,
+	0xf0f0f0f0f0f0f0f0ULL,
+	0xff00ff00ff00ff00ULL,
+	0xffff0000ffff0000ULL,
+	0xffffffff00000000ULL,
+	0x00000000ffffffffULL,
+	0x0000ffff0000ffffULL,
+	0x00ff00ff00ff00ffULL,
+	0x0f0f0f0f0f0f0f0fULL,
+	0x3333333333333333ULL,
+	0x5555555555555555ULL,
 };

 /*********************************************************************/
--- a/board/RPXlite_dw/Makefile
+++ b/board/RPXlite_dw/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
--- a/board/RPXlite_dw/README
+++ b/board/RPXlite_dw/README
@@ -0,0 +1,96 @@
+
+After following the step of Yoo. Jonghoon and Wolfgang Denk,
+I ported u-boot on RPXlite DW version board: RPXlite_DW or LITE_DW.
+
+There are three differences between the Yoo-ported RPXlite and the RPXlite_DW.
+
+Board(in U-BOOT)	version(in EmbeddedPlanet)	CPU	SDRAM	FLASH
+RPXlite				RPXlite CW		850	16MB	4MB
+RPXlite_DW			RPXlite DW		823e	64MB	16MB
+
+This fireware is specially coded for EmbeddedPlanet Co. Software Development
+Platform(RPXlite DW),which has a NEC NL6448BC20-08 LCD panel.
+
+It has the following three features:
+
+1. 64MHz/48MHz system frequence setting options.
+The default setting is 48MHz.To get a 64MHz u-boot,just add
+'64' in make command,like
+
+make RPXlite_DW_64_config
+make all
+
+2. CFG_ENV_IS_IN_FLASH/CFG_ENV_IS_IN_NVRAM
+
+The default environment parameter is stored in FLASH because it is a common choice for
+environment parameter.So I make NVRAM as backup parameter storeage.The reason why I
+didn't use EEPROM for ENV is that PlanetCore V2.0 use EEPROM as environment parameter
+home.Because of the possibility of using two firewares on this board,I didn't
+'disturb' EEPROM.To get NVRAM support,you may use the following build command:
+
+make RPXlite_DW_NVRAM_config
+make all
+
+3. LCD panel support
+
+To support the Platform better,I added LCD panel(NL6448BC20-08) function.But bewear of
+the fact that once you build this support and program it to FLASH,you should make sure
+you put workable kernel and ramdisk at the right place in FLASH or through NFS.
+Otherwise, you must erase this fireware manually via BDI2000 or ICE tools.So this
+function is used for deployment and demo only.Pls look before you leap.
+
+To get a LCD support u-boot,you can do the following:
+
+make RPXlite_DW_LCD_config
+make all
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The basic make commands could be:
+
+make RPXlite_DW_config
+make RPXlite_DW_64_config
+make RPXlite_DW_LCD_config
+make RPXlite_DW_NVRAM_config
+
+BTW,you can combine the above features together and get a workable u-boot to meet your need.
+For example,to get a 64MHZ && ENV_IS_IN_FLASH && LCD panel support u-boot,you can type:
+
+make RPXlite_DW_NVRAM_64_LCD_config
+make all
+
+So other combining make commands could be:
+
+make RPXlite_DW_NVRAM_64_config
+make RPXlite_DW_NVRAM_LCD_config
+make RPXlite_DW_64_LCD_config
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The boot process by "make RPXlite_DW_config" could be:
+
+U-Boot 1.1.1 (Jun  8 2004 - 11:16:30)
+
+CPU:   PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache
+Board: RPXlite_DW
+DRAM:  64 MB
+FLASH: 16 MB
+*** Warning - bad CRC, using default environment
+
+In:    serial
+Out:   serial
+Err:   serial
+Net:   SCC ETHERNET
+u-boot>
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+I'd like to extend my heartfelt gratitute to kind people for helping me work it out.
+I would particually thank Wolfgang Denk for his nice help.
+
+Enjoy,
+
+Sam Song, samsongshu@yahoo.com.cn
+Institute of Electrical Machinery and Controls
+Shanghai University
+
+June 8,2004
--- a/board/RPXlite_dw/RPXlite_dw.c
+++ b/board/RPXlite_dw/RPXlite_dw.c
@@ -0,0 +1,180 @@
+/*
+ * (C) Copyright 2004
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Sam Song
+ * U-Boot port on RPXlite DW board : RPXlite_DW or LITE_DW
+ * Tested on working at 64MHz(CPU)/32MHz(BUS),48MHz/24MHz
+ * with 64MB, 2 SDRAM Micron chips,MT48LC16M16A2-75.
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+static long int dram_size (long int, long int *, long int);
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFCC25
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 00h in UPMA RAM)
+	 */
+	0x0F03CC04, 0x00ACCC24, 0x1FF74C20, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_,
+
+	/*
+	 * Burst Read. (Offset 08h in UPMA RAM)
+	 */
+	0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
+	0x01FFCC20, 0x1FF74C20, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Single Write. (Offset 18h in UPMA RAM)
+	 */
+	0x0F03CC02, 0x00AC0C24, 0x1FF74C25, /* last */
+	_NOT_USED_, _NOT_USED_, 0x0FA00C34,0x0FFFCC35,
+	_NOT_USED_,
+
+	/*
+	 * Burst Write. (Offset 20h in UPMA RAM)
+	 */
+	0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
+	0x01FFFC24, 0x1FF74C25, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Refresh. (Offset 30h in UPMA RAM)
+	 */
+	0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
+	0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4,
+	/* INIT sequence RAM WORDS
+	 * SDRAM Initialization (offset 0x36 in UPMA RAM)
+	 * The above definition uses the remaining space
+	 * to establish an initialization sequence,
+	 * which is executed by a RUN command.
+	 * The sequence is COMMAND INHIBIT(NOP),Precharge,
+	 * Load Mode Register,NOP,Auto Refresh.
+	 */
+
+	/*
+	 * Exception. (Offset 3Ch in UPMA RAM)
+	 */
+	0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
+};
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: RPXlite_DW\n") ;
+	return (0) ;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size9;
+
+	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	/* Refresh clock prescalar */
+	memctl->memc_mptpr = CFG_MPTPR ;
+
+	memctl->memc_mar  = 0x00000088;
+
+	/* Map controller banks 1 to the SDRAM bank */
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+
+	memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
+	/*Disable Periodic timer A. */
+
+ 	udelay(200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr  = 0x80002236; /* SDRAM bank 0 - refresh twice */
+
+	udelay(1);
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	/*Enable Periodic timer A */
+
+	udelay (1000);
+
+	 /* Check Bank 0 Memory Size
+	  * try 9 column mode
+	  */
+
+	size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
+
+	/*
+	 * Final mapping:
+	 */
+
+	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+
+	udelay (1000);
+
+	return (size9);
+}
+
+void rpxlite_init (void)
+{
+	/* Enable NVRAM */
+	*((uchar *) BCSR0) |= BCSR0_ENNVRAM;
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+static long int dram_size (long int mamr_value, long int *base,
+			   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_mamr = mamr_value;
+
+	return (get_ram_size (base, maxsize));
+}
--- a/board/RPXlite_dw/config.mk
+++ b/board/RPXlite_dw/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# RPXlite dw boards : lite_dw
+#
+
+TEXT_BASE = 0xff000000
--- a/board/RPXlite_dw/flash.c
+++ b/board/RPXlite_dw/flash.c
@@ -0,0 +1,490 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-Boot port on RPXlite board
+ *
+ * Some of flash control words are modified. (from 2x16bit device
+ * to 4x8bit device)
+ * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
+ * are not tested.
+ *
+ * (?) Does an RPXLite board which
+ * 	does not use AM29LV800 flash memory exist ?
+ *	I don't know...
+ */
+
+/* Yes,Yoo.They do use other FLASH for the board.
+ *
+ * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
+ * U-Boot port on RPXlite DW version board
+ *
+ * By now,it uses 4 AM29DL323DB90VI devices(4x8bit).
+ * The total FLASH has 16MB(4x4MB).
+ * I just made some necessary changes on the basis of Wolfgang and Yoo's job.
+ *
+ * June 8, 2004 */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions   vu_long : volatile unsigned long IN include/common.h
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0 ;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* If Monitor is in the cope of FLASH,then
+	 * protect this area by default in case for
+	 * other occupation. [SAM] */
+
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      &flash_info[0]);
+#endif
+	flash_info[0].size = size_b0;
+	return (size_b0);
+}
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (info->flash_id & FLASH_BTYPE) {
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00008000;
+		info->start[2] = base + 0x00010000;
+		info->start[3] = base + 0x00018000;
+		info->start[4] = base + 0x00020000;
+		info->start[5] = base + 0x00028000;
+		info->start[6] = base + 0x00030000;
+		info->start[7] = base + 0x00038000;
+
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + ((i-7) * 0x00040000);
+		}
+	} else {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00010000;
+		info->start[i--] = base + info->size - 0x00018000;
+		info->start[i--] = base + info->size - 0x00020000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00040000;
+		}
+	}
+
+}
+
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AMDL323B:    printf ("AM29DL323B (32 Mbit, bottom boot sector)\n");
+				break;
+	/* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM]  */
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+	printf ("  Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0xAAA] = 0x00AA00AA ;
+	addr[0x555] = 0x00550055 ;
+	addr[0xAAA] = 0x00900090 ;
+
+	value = addr[0] ;
+	switch (value & 0x00FF00FF) {
+	case AMD_MANUFACT:             		/* AMD_MANUFACT=0x00010001 in flash.h. */
+		info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h.*/
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[2] ;			/* device ID		*/
+	switch (value & 0x00FF00FF) {
+	case (AMD_ID_LV400T & 0x00FF00FF):
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+	case (AMD_ID_LV400B & 0x00FF00FF):
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+	case (AMD_ID_LV800T & 0x00FF00FF):
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+	case (AMD_ID_LV800B & 0x00FF00FF):
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00400000;	/* Size doubled by yooth */
+		break;				/* => 4 MB		 */
+	case (AMD_ID_LV160T & 0x00FF00FF):
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+	case (AMD_ID_LV160B & 0x00FF00FF):
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;				/* => 4 MB		*/
+	case (AMD_ID_DL323B & 0x00FF00FF):
+		info->flash_id += FLASH_AMDL323B;
+		info->sector_count = 71;
+		info->size = 0x01000000;
+		break;                          /* => 16 MB(4x4MB)  */
+	/* AMD_ID_DL323B= 0x22532253  FLASH_AMDL323B= 0x0013
+	 * AMD_ID_DL323B could be found in <flash.h>.[SAM]
+	 * So we could get : flash_id = 0x00000013.
+	 * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+	/* set up sector start address table */
+	if (info->flash_id & FLASH_BTYPE) {
+	/* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1,
+	 * it means bottom boot flash. GOOD IDEA! [SAM]
+	 */
+
+	/* set sector offsets for bottom boot block type        */
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00008000;
+		info->start[2] = base + 0x00010000;
+		info->start[3] = base + 0x00018000;
+		info->start[4] = base + 0x00020000;
+		info->start[5] = base + 0x00028000;
+		info->start[6] = base + 0x00030000;
+		info->start[7] = base + 0x00038000;
+
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + ((i-7) * 0x00040000) ;
+		}
+	} else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00010000;
+		info->start[i--] = base + info->size - 0x00018000;
+		info->start[i--] = base + info->size - 0x00020000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00040000;
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr = (volatile unsigned long *)(info->start[i]);
+		/* info->protect[i] = addr[4] & 1 ; */
+		/* Mask it for disorder FLASH protection **[Sam]** */
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (volatile unsigned long *)info->start[0];
+
+		*addr = 0xF0F0F0F0;	/* reset bank */
+	}
+	return (info->size);
+}
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	vu_long *addr = (vu_long*)(info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+	addr[0xAAA] = 0x80808080;
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (vu_long *)(info->start[sect]) ;
+			addr[0] = 0x30303030 ;
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (vu_long *)(info->start[l_sect]);
+	while ((addr[0] & 0x80808080) != 0x80808080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (vu_long *)info->start[0];
+	addr[0] = 0xF0F0F0F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)(info->start[0]);
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+	addr[0xAAA] = 0xA0A0A0A0;
+
+	*((vu_long *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
--- a/board/RPXlite_dw/u-boot.lds
+++ b/board/RPXlite_dw/u-boot.lds
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+/* XXX ?
+    . = env_offset;
+*/
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ b/board/RPXlite_dw/u-boot.lds.debug
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
--- a/board/adder/Makefile
+++ b/board/adder/Makefile
@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2004 Arabella Software Ltd.
+# Yuli Barcohen <yuli@arabellasw.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/adder/adder.c
+++ b/board/adder/adder.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2004 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * Support for Analogue&Micro Adder boards family.
+ * Tested on AdderII and Adder87x.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/*
+ * SDRAM is single Samsung K4S643232F-T70 chip.
+ * Minimal CPU frequency is 40MHz.
+ */
+static uint sdram_table[] = {
+	/* Single read	(offset 0x00 in UPM RAM) */
+	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
+	0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
+
+	/* Burst read	(offset 0x08 in UPM RAM) */
+	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
+	0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
+	0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
+
+	/* Single write (offset 0x18 in UPM RAM) */
+	0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
+	0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* Burst write	(offset 0x20 in UPM RAM) */
+	0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* Refresh	(offset 0x30 in UPM RAM) */
+	0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
+	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* Exception	(offset 0x3C in UPM RAM) */
+	0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04
+};
+
+long int initdram (int board_type)
+{
+	long int msize = CFG_SDRAM_SIZE;
+	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
+
+	/* Configure SDRAM refresh */
+	memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */
+
+	memctl->memc_mamr = (94 << 24) | CFG_MAMR;
+	memctl->memc_mar  = 0x0;
+	udelay(200);
+
+	/* Run precharge from location 0x15 */
+	memctl->memc_mcr = 0x80002115;
+	udelay(200);
+
+	/* Run 8 refresh cycles */
+	memctl->memc_mcr = 0x80002830;
+	udelay(200);
+
+	memctl->memc_mar = 0x88;
+	udelay(200);
+
+	/* Run MRS pattern from location 0x16 */
+	memctl->memc_mcr = 0x80002116;
+	udelay(200);
+
+	return msize;
+}
+
+int checkboard( void )
+{
+	puts("Board: Adder");
+#if defined(CONFIG_MPC885_FAMILY)
+	puts("87x\n");
+#elif defined(CONFIG_MPC866_FAMILY)
+	puts("II\n");
+#endif
+
+	return 0;
+}
--- a/board/adder/config.mk
+++ b/board/adder/config.mk
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2004 Arabella Software Ltd.
+# Yuli Barcohen <yuli@arabellasw.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Analogue&Micro Adder boards family
+#
+TEXT_BASE = 0xFE000000
--- a/board/adder/u-boot.lds
+++ b/board/adder/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by Yuli Barcohen <yuli@arabellasw.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp        : { *(.interp)		}
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt           : { *(.plt)		}
+  .text          :
+  {
+    cpu/mpc8xx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+ENTRY(_start)
--- a/board/adderII/adderII.c
+++ b/board/adderII/adderII.c
@@ -1,189 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-/*
- * Check Board Identity:
- */
-
-int checkboard( void )
-{
-	puts("Board: ");
-	puts("AdderII(MPC852T)\n" );
-
-  	return 0;
-}
-
-#if defined( CONFIG_SDRAM_50MHZ )
-
-/******************************************************************************
-** for chip Samsung K4S643232F - T70
-** this table is for 32-50MHz operation
-*******************************************************************************/
-
-#define SDRAM_MPTPRVALUE 	0x0200
-
-#define SDRAM_MAMRVALUE0 	0x00802114   /* refresh at 32MHz */
-#define SDRAM_MAMRVALUE1 	0x00802118
-
-#define SDRAM_OR1VALUE   	0xff800e00
-#define SDRAM_BR1VALUE   	0x00000081
-
-#define SDRAM_MARVALUE		94
-
-#define SDRAM_MCRVALUE0  	0x80808105
-#define SDRAM_MCRVALUE1  	0x80808130
-
-const uint sdram_table[] = {
-
-	/* single read   (offset 0x00 in upm ram) */
-       	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
-       	0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
-
-	/* burst read    (offset 0x08 in upm ram) */
-       	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
-       	0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
-       	0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
-       	0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
-
-	/* single write  (offset 0x18 in upm ram) */
-       	0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
-       	0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* burst write   (offset 0x20 in upm ram) */
-       	0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-       	0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
-       	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-       	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* refresh       (offset 0x30 in upm ram) */
-       	0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-       	0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
-       	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-
-	/* exception     (offset 0x3C in upm ram) */
-       	0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-};
-
-#else
-#error SDRAM not correctly configured
-#endif
-
-int _initsdram (uint base, uint noMbytes)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	if (noMbytes != 8) {
-		return -1;
-	}
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	memctl->memc_mptpr = SDRAM_MPTPRVALUE;
-
-	/* Configure the refresh (mostly).  This needs to be
-	 * based upon processor clock speed and optimized to provide
-	 * the highest level of performance.  For multiple banks,
-	 * this time has to be divided by the number of banks.
-	 * Although it is not clear anywhere, it appears the
-	 * refresh steps through the chip selects for this UPM
-	 * on each refresh cycle.
-	 * We have to be careful changing
-	 * UPM registers after we ask it to run these commands.
-	 */
-
-	memctl->memc_mamr = (SDRAM_MAMRVALUE0 | (SDRAM_MARVALUE << 24));
-	memctl->memc_mar = 0x0;
-	udelay (200);
-
-	/* Now run the precharge/nop/mrs commands.
-	 */
-	memctl->memc_mcr = 0x80002115;
-	udelay (200);
-
-	/* Run 8 refresh cycles */
-	memctl->memc_mcr = 0x80002380;
-	udelay (200);
-
-	memctl->memc_mar = 0x88;
-	udelay (200);
-
-	memctl->memc_mcr = 0x80002116;
-	udelay (200);
-
-	memctl->memc_or1 = SDRAM_OR1VALUE;
-	memctl->memc_br1 = SDRAM_BR1VALUE | base;
-
-	return 0;
-}
-
-void _sdramdisable( void )
-{
-	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_br1 = 0x00000000;
-
-	/* maybe we should turn off upma here or something */
-}
-
-int initsdram (uint base, uint * noMbytes)
-{
-	uint m = 8;
-
-	*noMbytes = m;
-
-	if (!_initsdram (base, m)) {
-		return 0;
-	} else {
-		_sdramdisable ();
-		return -1;
-	}
-}
-
-long int initdram (int board_type)
-{
-	/* AdderII: has 8MB SDRAM */
-	uint sdramsz;
-	uint m = 0;
-
-	if (!initsdram (0x00000000, &sdramsz)) {
-		m += sdramsz;
-	} else {
-		return -1;
-	}
-	return (m << 20);
-}
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX not an actual SDRAM test */
-	printf ("Test: 8MB SDRAM\n");
-
-	return (0);
-}
--- a/board/altera/dk1c20/vectors.S
+++ b/board/altera/dk1c20/vectors.S
@@ -38,6 +38,8 @@
 *	_cwp_lolimit	-Handles register window underflows.
 *	_cwp_hilimit	-Handles register window overflows.
 *	_timebase_int	-Increments the timebase.
+ *	_brkpt_hw_int	-Hardware breakpoint handler.
+ *	_brkpt_sw_int	-Software breakpoint handler.
 *	_def_xhandler	-Default exception handler.
 *
 * _timebase_int handles a Nios Timer interrupt and increments the
@@ -58,9 +60,8 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 0  - NMI */
 	.long	_cwp_lolimit@h		/* Vector 1  -  underflow */
 	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
-
-	.long	_def_xhandler@h		/* Vector 3 - GNUPro debug */
-	.long	_def_xhandler@h		/* Vector 4 - GNUPro debug */
+	.long	_brkpt_hw_int@h		/* Vector 3 - Breakpoint */
+	.long	_brkpt_sw_int@h		/* Vector 4 - Single step*/
 	.long	_def_xhandler@h		/* Vector 5 - GNUPro debug */
 	.long	_def_xhandler@h		/* Vector 6 - future reserved */
 	.long	_def_xhandler@h		/* Vector 7 - future reserved */
--- a/board/assabet/Makefile
+++ b/board/assabet/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# 2004 (c) MontaVista Software, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= assabet.o
+SOBJS	:= setup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/assabet/assabet.c
+++ b/board/assabet/assabet.c
@@ -0,0 +1,121 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Board dependent initialisation
+ */
+
+#define ECOR			0x8000
+#define ECOR_RESET		0x80
+#define ECOR_LEVEL_IRQ		0x40
+#define ECOR_WR_ATTRIB		0x04
+#define ECOR_ENABLE		0x01
+
+#define ECSR			0x8002
+#define ECSR_IOIS8		0x20
+#define ECSR_PWRDWN		0x04
+#define ECSR_INT		0x02
+#define SMC_IO_SHIFT		2
+#define NCR_0           	(*((volatile u_char *)(0x100000a0)))
+#define NCR_ENET_OSC_EN		(1<<3)
+
+static inline u8
+readb(volatile u8 * p)
+{
+	return *p;
+}
+
+static inline void
+writeb(u8 v, volatile u8 * p)
+{
+	*p = v;
+}
+
+static void
+smc_init(void)
+{
+	u8 ecor;
+	u8 ecsr;
+	volatile u8 *addr = (volatile u8 *)(0x18000000 + (1 << 25));
+
+	NCR_0 |= NCR_ENET_OSC_EN;
+	udelay(100);
+
+	ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
+	writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
+	udelay(100);
+
+	/*
+	 * The device will ignore all writes to the enable bit while
+	 * reset is asserted, even if the reset bit is cleared in the
+	 * same write.  Must clear reset first, then enable the device.
+	 */
+	writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
+	writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
+
+	/*
+	 * Set the appropriate byte/word mode.
+	 */
+	ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
+	ecsr |= ECSR_IOIS8;
+	writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
+	udelay(100);
+}
+
+static void
+neponset_init(void)
+{
+	smc_init();
+}
+
+int
+board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_arch_number = MACH_TYPE_ASSABET;
+	gd->bd->bi_boot_params = 0xc0000100;
+
+	neponset_init();
+
+	return 0;
+}
+
+int
+dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return (0);
+}
--- a/board/assabet/config.mk
+++ b/board/assabet/config.mk
@@ -0,0 +1,7 @@
+#
+# SA-1110 based Intel Assabet board
+#
+# The Intel Assabet 1 bank of 32 MiB SDRAM
+#
+
+TEXT_BASE = 0xc1f00000
--- a/board/assabet/setup.S
+++ b/board/assabet/setup.S
@@ -0,0 +1,136 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include "config.h"
+#include "version.h"
+
+
+/*-----------------------------------------------------------------------
+ * Board defines:
+ */
+
+#define MDCNFG		0x00
+#define MDCAS00		0x04
+#define MDCAS01		0x08
+#define MDCAS02		0x0C
+#define MSC0		0x10
+#define MSC1		0x14
+#define MECR		0x18
+#define MDREFR		0x1C
+#define MDCAS20		0x20
+#define MDCAS21		0x24
+#define MDCAS22		0x28
+#define MSC2		0x2C
+#define SMCNFG		0x30
+
+#define ASSABET_BCR		(0x12000000)
+#define ASSABET_BCR_DB1110	(0x00a07490 | (0<<16) | (0<<17))
+#define ASSABET_SCR_nNEPONSET	(1 << 9)
+#define NEPONSET_LEDS		(0x10000010)
+
+
+/*-----------------------------------------------------------------------
+ * Setup parameters for the board:
+ */
+
+
+MEM_BASE:	.long	0xa0000000
+MEM_START:	.long	0xc0000000
+
+mdcnfg:		.long	0x72547254
+mdcas00:	.long	0xaaaaaa7f
+mdcas01:	.long	0xaaaaaaaa
+mdcas02:	.long	0xaaaaaaaa
+msc0:		.long	0x4b384370
+msc1:		.long	0x22212419
+mecr:		.long	0x994a994a
+mdrefr:		.long	0x04340327
+mdcas20:	.long	0xaaaaaa7f
+mdcas21:	.long	0xaaaaaaaa
+mdcas22:	.long	0xaaaaaaaa
+msc2:		.long	0x42196669
+smcnfg:		.long	0x00000000
+
+BCR:		.long	ASSABET_BCR
+BCR_DB1110:	.long	ASSABET_BCR_DB1110
+LEDS:		.long	NEPONSET_LEDS
+
+
+	.globl memsetup
+memsetup:
+
+	/* Setting up the memory and stuff */
+
+	ldr	r0, MEM_BASE
+	ldr	r1, mdcas00
+	str	r1, [r0, #MDCAS00]
+	ldr	r1, mdcas01
+	str	r1, [r0, #MDCAS01]
+	ldr	r1, mdcas02
+	str	r1, [r0, #MDCAS02]
+	ldr	r1, mdcas20
+	str	r1, [r0, #MDCAS20]
+	ldr	r1, mdcas21
+	str	r1, [r0, #MDCAS21]
+	ldr	r1, mdcas22
+	str	r1, [r0, #MDCAS22]
+	ldr	r1, mdrefr
+	str	r1, [r0, #MDREFR]
+	ldr	r1, mecr
+	str	r1, [r0, #MECR]
+	ldr	r1, msc0
+	str	r1, [r0, #MSC0]
+	ldr	r1, msc1
+	str	r1, [r0, #MSC1]
+	ldr	r1, msc2
+	str	r1, [r0, #MSC2]
+	ldr	r1, smcnfg
+	str	r1, [r0, #SMCNFG]
+
+	ldr	r1, mdcnfg
+	str	r1, [r0, #MDCNFG]
+
+	/* Load something to activate bank */
+	ldr	r2, MEM_START
+.rept	8
+	ldr	r3, [r2]
+.endr
+
+	/* Enable SDRAM */
+	orr	r1, r1, #0x00000001
+	str	r1, [r0, #MDCNFG]
+
+	ldr	r1, BCR
+	ldr	r2, BCR_DB1110
+	str	r2, [r1]
+
+	ldr	r1, LEDS
+	mov	r0, #0x3
+	str	r0, [r1]
+
+	/* All done... */
+	mov	pc, lr
--- a/board/assabet/u-boot.lds
+++ b/board/assabet/u-boot.lds
@@ -0,0 +1,57 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+		cpu/sa1100/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
--- a/board/at91rm9200dk/Makefile
+++ b/board/at91rm9200dk/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk

 LIB	= lib$(BOARD).a

-OBJS	:= at91rm9200dk.o flash.o
+OBJS	:= at91rm9200dk.o at45.o dm9161.o flash.o
 SOBJS	:=

 $(LIB):	$(OBJS) $(SOBJS)
--- a/board/at91rm9200dk/at45.c
+++ b/board/at91rm9200dk/at45.c
@@ -25,7 +25,14 @@
 #ifdef CONFIG_HAS_DATAFLASH
 #include <dataflash.h>

-#define SPI_CLK 5000000
+#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
+the Continuous Array Read function */
+
+/* AC Characteristics */
+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS	(0xC << 16)
+#define DATAFLASH_TCHS	(0x1 << 24)
+
 #define AT91C_TIMEOUT_WRDY			200000
 #define AT91C_SPI_PCS0_SERIAL_DATAFLASH		0xE     /* Chip Select 0 : NPCS0 %1110 */
 #define AT91C_SPI_PCS3_DATAFLASH_CARD		0x7     /* Chip Select 3 : NPCS3 %0111 */
@@ -50,9 +57,11 @@ void AT91F_SpiInit(void) {
 	AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;

 	/* Configure CS0 and CS3 */
-	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & 0x100000) | ((AT91C_MASTER_CLOCK / (2*SPI_CLK)) << 8);
+	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
+	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);

-	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & 0x100000) | ((AT91C_MASTER_CLOCK / (2*SPI_CLK)) << 8);
+	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
+	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);

 }

--- a/board/at91rm9200dk/at91rm9200dk.c
+++ b/board/at91rm9200dk/at91rm9200dk.c
@@ -45,7 +45,7 @@ int board_init (void)
 	/* so we do _nothing_ here */

 	/* arch number of AT91RM9200DK-Board */
-	gd->bd->bi_arch_number = 251;
+	gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

@@ -102,6 +102,10 @@ void nand_init (void)
 	*AT91C_PIOB_PER = AT91C_PIO_PB1;	/* enable direct output enable */
 	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */

+	/* PIOB and PIOC clock enabling */
+	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
+
 	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
 		printf ("  No SmartMedia card inserted\n");
 #ifdef DEBUG
--- a/board/at91rm9200dk/dm9161.c
+++ b/board/at91rm9200dk/dm9161.c
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2003
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <at91rm9200_net.h>
+#include <net.h>
+#include <dm9161.h>
+
+#ifdef CONFIG_DRIVER_ETHER
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+/*
+ * Name:
+ *	dm9161_IsPhyConnected
+ * Description:
+ *	Reads the 2 PHY ID registers
+ * Arguments:
+ *	p_mac - pointer to AT91S_EMAC struct
+ * Return value:
+ *	TRUE - if id read successfully
+ *	FALSE- if error
+ */
+static unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac)
+{
+	unsigned short Id1, Id2;
+
+	at91rm9200_EmacEnableMDIO (p_mac);
+	at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1);
+	at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2);
+	at91rm9200_EmacDisableMDIO (p_mac);
+
+	if ((Id1 == (DM9161_PHYID1_OUI >> 6)) &&
+		((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK)))
+		return TRUE;
+
+	return FALSE;
+}
+
+/*
+ * Name:
+ *	dm9161_GetLinkSpeed
+ * Description:
+ *	Link parallel detection status of MAC is checked and set in the
+ *	MAC configuration registers
+ * Arguments:
+ *	p_mac - pointer to MAC
+ * Return value:
+ *	TRUE - if link status set succesfully
+ *	FALSE - if link status not set
+ */
+static UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
+{
+	unsigned short stat1, stat2;
+
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1))
+		return FALSE;
+
+	if (!(stat1 & DM9161_LINK_STATUS))	/* link status up? */
+		return FALSE;
+
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2))
+		return FALSE;
+
+	if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) {
+		/*set Emac for 100BaseTX and Full Duplex  */
+		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+		return TRUE;
+	}
+
+	if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) {
+		/*set MII for 10BaseT and Full Duplex  */
+		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+				| AT91C_EMAC_FD;
+		return TRUE;
+	}
+
+	if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) {
+		/*set MII for 100BaseTX and Half Duplex  */
+		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+				| AT91C_EMAC_SPD;
+		return TRUE;
+	}
+
+	if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) {
+		/*set MII for 10BaseT and Half Duplex  */
+		p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
+		return TRUE;
+	}
+	return FALSE;
+}
+
+
+/*
+ * Name:
+ *	dm9161_InitPhy
+ * Description:
+ *	MAC starts checking its link by using parallel detection and
+ *	Autonegotiation and the same is set in the MAC configuration registers
+ * Arguments:
+ *	p_mac - pointer to struct AT91S_EMAC
+ * Return value:
+ *	TRUE - if link status set succesfully
+ *	FALSE - if link status not set
+ */
+static UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
+{
+	UCHAR ret = TRUE;
+	unsigned short IntValue;
+
+	at91rm9200_EmacEnableMDIO (p_mac);
+
+	if (!dm9161_GetLinkSpeed (p_mac)) {
+		/* Try another time */
+		ret = dm9161_GetLinkSpeed (p_mac);
+	}
+
+	/* Disable PHY Interrupts */
+	at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
+	/* clear FDX, SPD, Link, INTR masks */
+	IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK |
+		      DM9161_LINK_MASK | DM9161_INTR_MASK);
+	at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
+	at91rm9200_EmacDisableMDIO (p_mac);
+
+	return (ret);
+}
+
+
+/*
+ * Name:
+ *	dm9161_AutoNegotiate
+ * Description:
+ *	MAC Autonegotiates with the partner status of same is set in the
+ *	MAC configuration registers
+ * Arguments:
+ *	dev - pointer to struct net_device
+ * Return value:
+ *	TRUE - if link status set successfully
+ *	FALSE - if link status not set
+ */
+static UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
+{
+	unsigned short value;
+	unsigned short PhyAnar;
+	unsigned short PhyAnalpar;
+
+	/* Set dm9161 control register */
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+	value &= ~DM9161_AUTONEG;	/* remove autonegotiation enable */
+	value |= DM9161_ISOLATE;	/* Electrically isolate PHY */
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+
+	/* Set the Auto_negotiation Advertisement Register */
+	/* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
+	PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
+		  DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
+		return FALSE;
+
+	/* Read the Control Register     */
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+
+	value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE;
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+	/* Restart Auto_negotiation  */
+	value |= DM9161_RESTART_AUTONEG;
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+
+	/*check AutoNegotiate complete */
+	udelay (10000);
+	at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value);
+	if (!(value & DM9161_AUTONEG_COMP))
+		return FALSE;
+
+	/* Get the AutoNeg Link partner base page */
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar))
+		return FALSE;
+
+	if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) {
+		/*set MII for 100BaseTX and Full Duplex  */
+		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+		return TRUE;
+	}
+
+	if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) {
+		/*set MII for 10BaseT and Full Duplex  */
+		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+				| AT91C_EMAC_FD;
+		return TRUE;
+	}
+	return FALSE;
+}
+
+
+/*
+ * Name:
+ *	at91rm92000_GetPhyInterface
+ * Description:
+ *	Initialise the interface functions to the PHY
+ * Arguments:
+ *	None
+ * Return value:
+ *	None
+ */
+void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops)
+{
+	p_phyops->Init = dm9161_InitPhy;
+	p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
+	p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
+	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
+}
+
+#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
+
+#endif	/* CONFIG_DRIVER_ETHER */
--- a/board/at91rm9200dk/flash.c
+++ b/board/at91rm9200dk/flash.c
@@ -42,20 +42,22 @@ typedef struct OrgDef
 /* Flash Organizations */
 OrgDef OrgAT49BV16x4[] =
 {
-	{ 8, 8*1024 }, /* 8 * 8kBytes sectors */
-	{ 2, 32*1024 }, /* 2 * 32kBytes sectors */
-	{ 30, 64*1024 } /* 30 * 64kBytes sectors */
+	{  8,  8*1024 },	/*   8 *  8 kBytes sectors */
+	{  2, 32*1024 },	/*   2 * 32 kBytes sectors */
+	{ 30, 64*1024 },	/*  30 * 64 kBytes sectors */
 };

 OrgDef OrgAT49BV16x4A[] =
 {
-	{ 8, 8*1024 }, /* 8 * 8kBytes sectors */
-	{ 31, 64*1024 } /* 31 * 64kBytes sectors */
+	{  8,  8*1024 },	/*   8 *  8 kBytes sectors */
+	{ 31, 64*1024 },	/*  31 * 64 kBytes sectors */
 };

-
-#define FLASH_BANK_SIZE 0x200000	/* 2 MB */
-#define MAIN_SECT_SIZE  0x10000		/* 64 KB */
+OrgDef OrgAT49BV6416[] =
+{
+	{   8,  8*1024 },	/*   8 *  8 kBytes sectors */
+	{ 127, 64*1024 },	/* 127 * 64 kBytes sectors */
+};

 flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];

@@ -73,13 +75,11 @@ flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 #define CMD_ERASE_CONFIRM	0x0030
 #define CMD_PROGRAM		0x00A0
 #define CMD_UNLOCK_BYPASS	0x0020
+#define CMD_SECTOR_UNLOCK	0x0070

 #define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
 #define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))

-#define IDENT_FLASH_ADDR1	(*(volatile u16 *)(CFG_FLASH_BASE + (0x0000555<<1)))
-#define IDENT_FLASH_ADDR2	(*(volatile u16 *)(CFG_FLASH_BASE + (0x0000AAA<<1)))
-
 #define BIT_ERASE_DONE		0x0080
 #define BIT_RDY_MASK		0x0080
 #define BIT_PROGRAM_ERROR	0x0020
@@ -95,17 +95,17 @@ void flash_identification (flash_info_t * info)
 {
 	volatile u16 manuf_code, device_code, add_device_code;

-	IDENT_FLASH_ADDR1 = FLASH_CODE1;
-	IDENT_FLASH_ADDR2 = FLASH_CODE2;
-	IDENT_FLASH_ADDR1 = ID_IN_CODE;
+	MEM_FLASH_ADDR1 = FLASH_CODE1;
+	MEM_FLASH_ADDR2 = FLASH_CODE2;
+	MEM_FLASH_ADDR1 = ID_IN_CODE;

 	manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
 	device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
 	add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));

-	IDENT_FLASH_ADDR1 = FLASH_CODE1;
-	IDENT_FLASH_ADDR2 = FLASH_CODE2;
-	IDENT_FLASH_ADDR1 = ID_OUT_CODE;
+	MEM_FLASH_ADDR1 = FLASH_CODE1;
+	MEM_FLASH_ADDR2 = FLASH_CODE2;
+	MEM_FLASH_ADDR1 = ID_OUT_CODE;

 	/* Vendor type */
 	info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
@@ -117,14 +117,36 @@ void flash_identification (flash_info_t * info)
 			(ATM_ID_BV1614A & FLASH_TYPEMASK)) {
 			info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
 			printf ("AT49BV1614A (16Mbit)\n");
+		} else {				/* AT49BV1614 Flash */
+			info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
+			printf ("AT49BV1614 (16Mbit)\n");
 		}

-	} else {				/* AT49BV1614 Flash */
-		info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
-		printf ("AT49BV1614 (16Mbit)\n");
+	} else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
+		info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
+		printf ("AT49BV6416 (64Mbit)\n");
 	}
 }

+ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
+{
+	int i, nb_sectors = 0;
+
+	for (i=0; i<nb_blocks; i++){
+		nb_sectors += pOrgDef[i].sector_number;
+	}
+
+	return nb_sectors;
+}
+
+void flash_unlock_sector(flash_info_t * info, unsigned int sector)
+{
+	volatile u16 *addr = (volatile u16 *) (info->start[sector]);
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	*addr = CMD_SECTOR_UNLOCK;
+}
+

 ulong flash_init (void)
 {
@@ -140,23 +162,29 @@ ulong flash_init (void)

 		flash_identification (&flash_info[i]);

-		flash_info[i].size = FLASH_BANK_SIZE;
-
 		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
 			(ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);

 			pOrgDef = OrgAT49BV16x4;
 			flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
-		} else {			/* AT49BV1614A Flash */
-			flash_info[i].sector_count = CFG_MAX_FLASH_SECT - 1;
-			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT - 1);
+		} else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV1614A & FLASH_TYPEMASK)){	/* AT49BV1614A Flash */

 			pOrgDef = OrgAT49BV16x4A;
 			flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
+		} else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV6416 & FLASH_TYPEMASK)){	/* AT49BV6416 Flash */
+
+			pOrgDef = OrgAT49BV6416;
+			flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
+		} else {
+			flash_nb_blocks = 0;
+			pOrgDef = OrgAT49BV16x4;
 		}

+		flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
+		memset (flash_info[i].protect, 0, flash_info[i].sector_count);
+
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
@@ -164,15 +192,26 @@ ulong flash_init (void)

 		sector = 0;
 		start_address = flashbase;
+		flash_info[i].size = 0;

 		for (j = 0; j < flash_nb_blocks; j++) {
 			for (k = 0; k < pOrgDef[j].sector_number; k++) {
 				flash_info[i].start[sector++] = start_address;
 				start_address += pOrgDef[j].sector_size;
+				flash_info[i].size += pOrgDef[j].sector_size;
 			}
 		}

 		size += flash_info[i].size;
+
+		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV6416 & FLASH_TYPEMASK)){	/* AT49BV6416 Flash */
+
+			/* Unlock all sectors at reset */
+			for (j=0; j<flash_info[i].sector_count; j++){
+				flash_unlock_sector(&flash_info[i], j);
+			}
+		}
 	}

 	/* Protect binary boot image */
@@ -215,6 +254,9 @@ void flash_print_info (flash_info_t * info)
 	case (ATM_ID_BV1614A & FLASH_TYPEMASK):
 		printf ("AT49BV1614A (16Mbit)\n");
 		break;
+	case (ATM_ID_BV6416 & FLASH_TYPEMASK):
+		printf ("AT49BV6416 (64Mbit)\n");
+		break;
 	default:
 		printf ("Unknown Chip Type\n");
 		goto Done;
@@ -234,7 +276,7 @@ void flash_print_info (flash_info_t * info)
 	}
 	printf ("\n");

-  Done:
+Done:	;
 }

 /*-----------------------------------------------------------------------
--- a/board/cds/common/cadmus.c
+++ b/board/cds/common/cadmus.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+
+
+/*
+ * CADMUS Board System Registers
+ */
+#ifndef CFG_CADMUS_BASE_REG
+#define CFG_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
+#endif
+
+typedef struct cadmus_reg {
+    u_char cm_ver;		/* Board version */
+    u_char cm_csr;		/* General control/status */
+    u_char cm_rst;		/* Reset control */
+    u_char cm_hsclk;		/* High speed clock */
+    u_char cm_hsxclk;		/* High speed clock extended */
+    u_char cm_led;		/* LED data */
+    u_char cm_pci;		/* PCI control/status */
+    u_char cm_dma;		/* DMA control */
+    u_char cm_reserved[248];	/* Total 256 bytes */
+} cadmus_reg_t;
+
+
+unsigned int
+get_board_version(void)
+{
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+
+	return cadmus->cm_ver;
+}
+
+
+unsigned long
+get_clock_freq(void)
+{
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+
+	uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */
+
+	if (pci1_speed == 0) {
+		return 33000000;
+	} else if (pci1_speed == 1) {
+		return 66000000;
+	} else {
+		/* Really, unknown. Be safe? */
+		return 33000000;
+	}
+}
+
+
+unsigned int
+get_pci_slot(void)
+{
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+
+	/*
+	 * PCI slot in USER bits CSR[6:7] by convention.
+	 */
+	return ((cadmus->cm_csr >> 6) & 0x3) + 1;
+}
+
+
+unsigned int
+get_pci_dual(void)
+{
+	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
+
+	/*
+	 * PCI DUAL in CM_PCI[3]
+	 */
+	return cadmus->cm_pci & 0x10;
+}
--- a/board/cds/common/cadmus.h
+++ b/board/cds/common/cadmus.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CADMUS_H_
+#define __CADMUS_H_
+
+
+/*
+ * CADMUS Board System Register interface.
+ */
+
+/*
+ * Returns board version register.
+ */
+extern unsigned int get_board_version(void);
+
+/*
+ * Returns either 33000000 or 66000000 as the SYS_CLK_FREQ.
+ */
+extern unsigned long get_clock_freq(void);
+
+
+/*
+ * Returns 1 - 4, as found in the USER CSR[6:7] bits.
+ */
+extern unsigned int get_pci_slot(void);
+
+
+/*
+ * Returns PCI DUAL as found in CM_PCI[3].
+ */
+extern unsigned int get_pci_dual(void);
+
+
+#endif	/* __CADMUS_H_ */
--- a/board/cds/common/eeprom.c
+++ b/board/cds/common/eeprom.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <i2c.h>
+
+#include "eeprom.h"
+
+
+typedef struct {
+	char idee_pcbid[4];		/* "CCID" for CDC v1.X */
+	u8 idee_major;
+	u8 idee_minor;
+	char idee_serial[10];
+	char idee_errata[2];
+	char idee_date[8];		/* yyyymmdd */
+	/* The rest of the EEPROM space is reserved */
+} id_eeprom_t;
+
+
+unsigned int
+get_cpu_board_revision(void)
+{
+	uint major = 0;
+	uint minor = 0;
+
+	id_eeprom_t id_eeprom;
+
+	i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
+		 (uchar *) &id_eeprom, sizeof(id_eeprom));
+
+	major = id_eeprom.idee_major;
+	minor = id_eeprom.idee_minor;
+
+	if (major == 0xff && minor == 0xff) {
+		major = minor = 0;
+	}
+
+	return MPC85XX_CPU_BOARD_REV(major,minor);
+}
--- a/board/cds/common/eeprom.h
+++ b/board/cds/common/eeprom.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EEPROM_H_
+#define __EEPROM_H_
+
+
+/*
+ * EEPROM Board System Register interface.
+ */
+
+
+/*
+ * CPU Board Revision
+ */
+#define MPC85XX_CPU_BOARD_REV(maj, min)	((((maj)&0xff) << 8) | ((min) & 0xff))
+#define MPC85XX_CPU_BOARD_MAJOR(rev)	(((rev) >> 8) & 0xff)
+#define MPC85XX_CPU_BOARD_MINOR(rev)	((rev) & 0xff)
+
+#define MPC85XX_CPU_BOARD_REV_UNKNOWN	MPC85XX_CPU_BOARD_REV(0,0)
+#define MPC85XX_CPU_BOARD_REV_1_0	MPC85XX_CPU_BOARD_REV(1,0)
+#define MPC85XX_CPU_BOARD_REV_1_1	MPC85XX_CPU_BOARD_REV(1,1)
+
+/*
+ * Returns CPU board revision register as a 16-bit value with
+ * the Major in the high byte, and Minor in the low byte.
+ */
+extern unsigned int get_cpu_board_revision(void);
+
+
+#endif	/* __CADMUS_H_ */
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/cds/mpc8541cds/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o \
+	   ../common/cadmus.o \
+	   ../common/eeprom.o
+
+SOBJS	:= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/cds/mpc8541cds/config.mk
+++ b/board/cds/mpc8541cds/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8541cds board
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8541=1
--- a/board/cds/mpc8541cds/init.S
+++ b/board/cds/mpc8541cds/init.S
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define	entry_start \
+	mflr	r1 	;	\
+	bl	0f 	;
+
+#define	entry_end \
+0:	mflr	r0	;	\
+	mtlr	r1	;	\
+	blr		;
+
+
+	.section	.bootpg, "ax"
+	.globl	tlb1_entry
+tlb1_entry:
+	entry_start
+
+	/*
+	 * Number of TLB0 and TLB1 entries in the following table
+	 */
+	.long 13
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	/*
+	 * TLB0		4K	Non-cacheable, guarded
+	 * 0xff700000	4K	Initial CCSRBAR mapping
+	 *
+	 * This ends up at a TLB0 Index==0 entry, and must not collide
+	 * with other TLB0 Entries.
+	 */
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+	/*
+	 * TLB0		16K	Cacheable, non-guarded
+	 * 0xd001_0000	16K	Temporary Global data for initialization
+	 *
+	 * Use four 4K TLB0 entries.  These entries must be cacheable
+	 * as they provide the bootstrap memory before the memory
+	 * controler and real memory have been configured.
+	 *
+	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+	 * and must not collide with other TLB0 entries.
+	 */
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
+			0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+			0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+			0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+			0,0,0,0,0,1,0,1,0,1)
+
+
+	/*
+	 * TLB 0:	16M	Non-cacheable, guarded
+	 * 0xff000000	16M	FLASH
+	 * Out of reset this entry is only 4K.
+	 */
+	.long TLB1_MAS0(1, 0, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 1:	256M	Non-cacheable, guarded
+	 * 0x80000000	256M	PCI1 MEM First half
+	 */
+	.long TLB1_MAS0(1, 1, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 2:	256M	Non-cacheable, guarded
+	 * 0x90000000	256M	PCI1 MEM Second half
+	 */
+	.long TLB1_MAS0(1, 2, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
+			0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
+			0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 3:	256M	Non-cacheable, guarded
+	 * 0xa0000000	256M	PCI2 MEM First half
+	 */
+	.long TLB1_MAS0(1, 3, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 4:	256M	Non-cacheable, guarded
+	 * 0xb0000000	256M	PCI2 MEM Second half
+	 */
+	.long TLB1_MAS0(1, 4, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
+			0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
+			0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 5:	64M	Non-cacheable, guarded
+	 * 0xe000_0000	1M	CCSRBAR
+	 * 0xe200_0000	16M	PCI1 IO
+	 * 0xe300_0000	16M	PCI2 IO
+	 */
+	.long TLB1_MAS0(1, 5, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 6:	64M	Cacheable, non-guarded
+	 * 0xf000_0000	64M	LBC SDRAM
+	 */
+	.long TLB1_MAS0(1, 6, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 7:	1M	Non-cacheable, guarded
+	 * 0xf8000000	1M	CADMUS registers
+	 */
+	.long TLB1_MAS0(1, 7, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
+
+	entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000     0x7fff_ffff     DDR                     2G
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0xe000_0000     0xe000_ffff     CCSR                    1M
+ * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
+ * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
+ * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
+ * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
+ * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
+ *
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * The defines below are 1-off of the actual LAWAR0 usage.
+ * So LAWAR3 define uses the LAWAR4 register in the ECM.
+ */
+
+#define LAWBAR0 0
+#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
+#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
+#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+
+law_entry:
+	entry_start
+	.long 6
+	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
+	entry_end
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/cds/mpc8541cds/mpc8541cds.c
@@ -0,0 +1,349 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+#include "../common/cadmus.h"
+#include "../common/eeprom.h"
+
+#if defined(CONFIG_DDR_ECC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+
+	/* PCI slot in USER bits CSR[6:7] by convention. */
+	uint pci_slot = get_pci_slot ();
+
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
+	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
+	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
+
+	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
+
+	uint cpu_board_rev = get_cpu_board_revision ();
+
+	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
+		get_board_version (), pci_slot);
+
+	printf ("CPU Board Revision %d.%d (0x%04x)\n",
+		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
+		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
+
+	printf ("    PCI1: %d bit, %s MHz, %s\n",
+		(pci1_32) ? 32 : 64,
+		(pci1_speed == 33000000) ? "33" :
+		(pci1_speed == 66000000) ? "66" : "unknown",
+		pci1_clk_sel ? "sync" : "async");
+
+	if (pci_dual) {
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+			pci2_clk_sel ? "sync" : "async");
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	return 0;
+}
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+
+	puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+	{
+		/*
+		 * Work around to stabilize DDR DLL MSYNC_IN.
+		 * Errata DDR9 seems to have been fixed.
+		 * This is now the workaround for Errata DDR11:
+		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
+		 */
+
+		volatile ccsr_gur_t *gur= &immap->im_gur;
+
+		gur->ddrdllcr = 0x81000000;
+		asm("sync;isync;msync");
+		udelay(200);
+	}
+#endif
+	dram_size = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+	/*
+	 * SDRAM Initialization
+	 */
+	sdram_init();
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+
+	uint clkdiv;
+	uint lbc_hz;
+	sys_info_t sysinfo;
+	uint temp_lbcdll;
+
+	/*
+	 * Errata LBC11.
+	 * Fix Local Bus clock glitch when DLL is enabled.
+	 *
+	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
+	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * Between 66 and 133, the DLL is enabled with an override workaround.
+	 */
+
+	get_sys_info(&sysinfo);
+	clkdiv = lbc->lcrr & 0x0f;
+	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+	if (lbc_hz < 66) {
+		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
+
+	} else if (lbc_hz >= 133) {
+		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
+
+	} else {
+		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
+		udelay(200);
+
+		/*
+		 * Sample LBC DLL ctrl reg, upshift it to set the
+		 * override bits.
+		 */
+		temp_lbcdll = gur->lbcdllcr;
+		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
+		asm("sync;isync;msync");
+	}
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+
+	uint idx;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	uint cpu_board_rev;
+	uint lsdmr_common;
+
+	puts("    SDRAM: ");
+
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	lbc->or2 = CFG_OR2_PRELIM;
+	asm("msync");
+
+	lbc->br2 = CFG_BR2_PRELIM;
+	asm("msync");
+
+	lbc->lbcr = CFG_LBC_LBCR;
+	asm("msync");
+
+
+	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("msync");
+
+	/*
+	 * Determine which address lines to use baed on CPU board rev.
+	 */
+	cpu_board_rev = get_cpu_board_revision();
+	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
+		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
+		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	} else {
+		/*
+		 * Assume something unable to identify itself is
+		 * really old, and likely has lines 16/17 mapped.
+		 */
+		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+	}
+
+	/*
+	 * Issue PRECHARGE ALL command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue 8 AUTO REFRESH commands.
+	 */
+	for (idx = 0; idx < 8; idx++) {
+		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		asm("sync;msync");
+		*sdram_addr = 0xff;
+		ppcDcbf((unsigned long) sdram_addr);
+		udelay(100);
+	}
+
+	/*
+	 * Issue 8 MODE-set command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue NORMAL OP command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
+
+#endif	/* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+	       CFG_MEMTEST_START,
+	       CFG_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_PCI)
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc85xxcds_config_table[] = {
+    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+      PCI_IDSEL_NUMBER, PCI_ANY_ID,
+      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				   PCI_ENET0_MEMADDR,
+				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+      } },
+    { }
+};
+#endif
+
+static struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_mpc85xxcds_config_table,
+#endif
+};
+
+#endif	/* CONFIG_PCI */
+
+void
+pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+	extern void pci_mpc85xx_init(struct pci_controller *hose);
+
+	pci_mpc85xx_init(&hose);
+#endif
+}
--- a/board/cds/mpc8541cds/u-boot.lds
+++ b/board/cds/mpc8541cds/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+    board/cds/mpc8541cds/init.o (.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc85xx/start.o	(.text)
+    board/cds/mpc8541cds/init.o (.text)
+    cpu/mpc85xx/traps.o (.text)
+    cpu/mpc85xx/interrupts.o (.text)
+    cpu/mpc85xx/cpu_init.o (.text)
+    cpu/mpc85xx/cpu.o (.text)
+    cpu/mpc85xx/tsec.o (.text)
+    cpu/mpc85xx/speed.o (.text)
+    cpu/mpc85xx/pci.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/cds/mpc8555cds/Makefile
@@ -0,0 +1,51 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o \
+	   ../common/cadmus.o \
+	   ../common/eeprom.o
+
+SOBJS	:= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/cds/mpc8555cds/config.mk
+++ b/board/cds/mpc8555cds/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8555cds board
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8555=1
--- a/board/cds/mpc8555cds/init.S
+++ b/board/cds/mpc8555cds/init.S
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define	entry_start \
+	mflr	r1 	;	\
+	bl	0f 	;
+
+#define	entry_end \
+0:	mflr	r0	;	\
+	mtlr	r1	;	\
+	blr		;
+
+
+	.section	.bootpg, "ax"
+	.globl	tlb1_entry
+tlb1_entry:
+	entry_start
+
+	/*
+	 * Number of TLB0 and TLB1 entries in the following table
+	 */
+	.long 13
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	/*
+	 * TLB0		4K	Non-cacheable, guarded
+	 * 0xff700000	4K	Initial CCSRBAR mapping
+	 *
+	 * This ends up at a TLB0 Index==0 entry, and must not collide
+	 * with other TLB0 Entries.
+	 */
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+	/*
+	 * TLB0		16K	Cacheable, non-guarded
+	 * 0xd001_0000	16K	Temporary Global data for initialization
+	 *
+	 * Use four 4K TLB0 entries.  These entries must be cacheable
+	 * as they provide the bootstrap memory before the memory
+	 * controler and real memory have been configured.
+	 *
+	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+	 * and must not collide with other TLB0 entries.
+	 */
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
+			0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
+			0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
+			0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(0, 0, 0)
+	.long TLB1_MAS1(1, 0, 0, 0, 0)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+			0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
+			0,0,0,0,0,1,0,1,0,1)
+
+
+	/*
+	 * TLB 0:	16M	Non-cacheable, guarded
+	 * 0xff000000	16M	FLASH
+	 * Out of reset this entry is only 4K.
+	 */
+	.long TLB1_MAS0(1, 0, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 1:	256M	Non-cacheable, guarded
+	 * 0x80000000	256M	PCI1 MEM First half
+	 */
+	.long TLB1_MAS0(1, 1, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 2:	256M	Non-cacheable, guarded
+	 * 0x90000000	256M	PCI1 MEM Second half
+	 */
+	.long TLB1_MAS0(1, 2, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
+			0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
+			0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 3:	256M	Non-cacheable, guarded
+	 * 0xa0000000	256M	PCI2 MEM First half
+	 */
+	.long TLB1_MAS0(1, 3, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 4:	256M	Non-cacheable, guarded
+	 * 0xb0000000	256M	PCI2 MEM Second half
+	 */
+	.long TLB1_MAS0(1, 4, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
+			0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
+			0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 5:	64M	Non-cacheable, guarded
+	 * 0xe000_0000	1M	CCSRBAR
+	 * 0xe200_0000	16M	PCI1 IO
+	 * 0xe300_0000	16M	PCI2 IO
+	 */
+	.long TLB1_MAS0(1, 5, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 6:	64M	Cacheable, non-guarded
+	 * 0xf000_0000	64M	LBC SDRAM
+	 */
+	.long TLB1_MAS0(1, 6, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+
+	/*
+	 * TLB 7:	1M	Non-cacheable, guarded
+	 * 0xf8000000	1M	CADMUS registers
+	 */
+	.long TLB1_MAS0(1, 7, 0)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
+
+	entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000     0x7fff_ffff     DDR                     2G
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
+ * 0xe000_0000     0xe000_ffff     CCSR                    1M
+ * 0xe200_0000     0xe2ff_ffff     PCI1 IO                 16M
+ * 0xe300_0000     0xe3ff_ffff     PCI2 IO                 16M
+ * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
+ * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
+ * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
+ * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
+ *
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * The defines below are 1-off of the actual LAWAR0 usage.
+ * So LAWAR3 define uses the LAWAR4 register in the ECM.
+ */
+
+#define LAWBAR0 0
+#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
+#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR3 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
+#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+#define LAWBAR4 ((CFG_PCI2_IO_BASE>>12) & 0xfffff)
+#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+
+law_entry:
+	entry_start
+	.long 6
+	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
+	entry_end
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/cds/mpc8555cds/mpc8555cds.c
@@ -0,0 +1,346 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+#include "../common/cadmus.h"
+#include "../common/eeprom.h"
+
+#if defined(CONFIG_DDR_ECC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+
+	/* PCI slot in USER bits CSR[6:7] by convention. */
+	uint pci_slot = get_pci_slot ();
+
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
+	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
+	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
+
+	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
+
+	uint cpu_board_rev = get_cpu_board_revision ();
+
+	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
+		get_board_version (), pci_slot);
+
+	printf ("CPU Board Revision %d.%d (0x%04x)\n",
+		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
+		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
+
+	printf ("    PCI1: %d bit, %s MHz, %s\n",
+		(pci1_32) ? 32 : 64,
+		(pci1_speed == 33000000) ? "33" :
+		(pci1_speed == 66000000) ? "66" : "unknown",
+		pci1_clk_sel ? "sync" : "async");
+
+	if (pci_dual) {
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+			pci2_clk_sel ? "sync" : "async");
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	return 0;
+}
+
+long int
+initdram(int board_type)
+{
+	long dram_size = 0;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+
+	puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+	{
+		/*
+		 * Work around to stabilize DDR DLL MSYNC_IN.
+		 * Errata DDR9 seems to have been fixed.
+		 * This is now the workaround for Errata DDR11:
+		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
+		 */
+
+		volatile ccsr_gur_t *gur= &immap->im_gur;
+
+		gur->ddrdllcr = 0x81000000;
+		asm("sync;isync;msync");
+		udelay(200);
+	}
+#endif
+	dram_size = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(dram_size);
+#endif
+	/*
+	 * SDRAM Initialization
+	 */
+	sdram_init();
+
+	puts("    DDR: ");
+	return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+
+	uint clkdiv;
+	uint lbc_hz;
+	sys_info_t sysinfo;
+	uint temp_lbcdll;
+
+	/*
+	 * Errata LBC11.
+	 * Fix Local Bus clock glitch when DLL is enabled.
+	 *
+	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
+	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * Between 66 and 133, the DLL is enabled with an override workaround.
+	 */
+
+	get_sys_info(&sysinfo);
+	clkdiv = lbc->lcrr & 0x0f;
+	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+	if (lbc_hz < 66) {
+		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
+
+	} else if (lbc_hz >= 133) {
+		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
+
+	} else {
+		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
+		udelay(200);
+
+		/*
+		 * Sample LBC DLL ctrl reg, upshift it to set the
+		 * override bits.
+		 */
+		temp_lbcdll = gur->lbcdllcr;
+		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
+		asm("sync;isync;msync");
+	}
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+
+	uint idx;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+	uint cpu_board_rev;
+	uint lsdmr_common;
+
+	puts("    SDRAM: ");
+
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	lbc->or2 = CFG_OR2_PRELIM;
+	asm("msync");
+
+	lbc->br2 = CFG_BR2_PRELIM;
+	asm("msync");
+
+	lbc->lbcr = CFG_LBC_LBCR;
+	asm("msync");
+
+	lbc->lsrt = CFG_LBC_LSRT;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("msync");
+
+	/*
+	 * Determine which address lines to use baed on CPU board rev.
+	 */
+	cpu_board_rev = get_cpu_board_revision();
+	lsdmr_common = CFG_LBC_LSDMR_COMMON;
+	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
+		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
+		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+	} else {
+		/*
+		 * Assume something unable to identify itself is
+		 * really old, and likely has lines 16/17 mapped.
+		 */
+		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
+	}
+
+	/*
+	 * Issue PRECHARGE ALL command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue 8 AUTO REFRESH commands.
+	 */
+	for (idx = 0; idx < 8; idx++) {
+		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+		asm("sync;msync");
+		*sdram_addr = 0xff;
+		ppcDcbf((unsigned long) sdram_addr);
+		udelay(100);
+	}
+
+	/*
+	 * Issue 8 MODE-set command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue NORMAL OP command.
+	 */
+	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
+
+#endif	/* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+	       CFG_MEMTEST_START,
+	       CFG_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_PCI)
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc85xxcds_config_table[] = {
+    { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+      PCI_IDSEL_NUMBER, PCI_ANY_ID,
+      pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				   PCI_ENET0_MEMADDR,
+				   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+      } },
+    { }
+};
+#endif
+
+static struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_mpc85xxcds_config_table,
+#endif
+};
+
+#endif	/* CONFIG_PCI */
+
+void
+pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+	extern void pci_mpc85xx_init(struct pci_controller *hose);
+
+	pci_mpc85xx_init(&hose);
+#endif
+}
--- a/board/cds/mpc8555cds/u-boot.lds
+++ b/board/cds/mpc8555cds/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+    board/cds/mpc8555cds/init.o (.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc85xx/start.o	(.text)
+    board/cds/mpc8555cds/init.o (.text)
+    cpu/mpc85xx/traps.o (.text)
+    cpu/mpc85xx/interrupts.o (.text)
+    cpu/mpc85xx/cpu_init.o (.text)
+    cpu/mpc85xx/cpu.o (.text)
+    cpu/mpc85xx/tsec.o (.text)
+    cpu/mpc85xx/speed.o (.text)
+    cpu/mpc85xx/pci.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/cerf250/Makefile
+++ b/board/cerf250/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= cerf250.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/cerf250/cerf250.c
+++ b/board/cerf250/cerf250.c
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of cerf PXA Board */
+	gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	setenv("stdout", "serial");
+	setenv("stderr", "serial");
+	return 0;
+}
+
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
+	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
+
+	return 0;
+}
--- a/board/cerf250/config.mk
+++ b/board/cerf250/config.mk
@@ -0,0 +1,5 @@
+#
+# Cerf board with PXA250 cpu
+#
+#
+TEXT_BASE = 0xa3080000
--- a/board/omap1510inn/flash.c
+++ b/board/omap1510inn/flash.c
@@ -27,34 +27,34 @@
 #include <common.h>
 #include <linux/byteorder/swab.h>

-#define PHYS_FLASH_SECT_SIZE    0x00020000	/* 256 KB sectors (x2) */
+
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */

 /* Board support for 1 or 2 flash devices */
-#undef FLASH_PORT_WIDTH32
-#define FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH32
+#undef FLASH_PORT_WIDTH16

 #ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH	ushort
-#define FLASH_PORT_WIDTHV	vu_short
-#define SWAP(x)			__swab16(x)
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)               __swab16(x)
 #else
-#define FLASH_PORT_WIDTH	ulong
-#define FLASH_PORT_WIDTHV	vu_long
-#define SWAP(x)			__swab32(x)
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)               __swab32(x)
 #endif

-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
+#define FPW	   FLASH_PORT_WIDTH
+#define FPWV   FLASH_PORT_WIDTHV

 #define mb() __asm__ __volatile__ ("" : : : "memory")

 /*-----------------------------------------------------------------------
 * Functions
 */
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
+static ulong flash_get_size (FPW *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
 void inline spin_wheel (void);

 /*-----------------------------------------------------------------------
@@ -71,6 +71,10 @@ unsigned long flash_init (void)
 			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
 			break;
+		case 1:
+			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+			break;
 		default:
 			panic ("configured too many flash banks!\n");
 			break;
@@ -83,19 +87,18 @@ unsigned long flash_init (void)
 	flash_protect ( FLAG_PROTECT_SET,
 			CFG_FLASH_BASE,
 			CFG_FLASH_BASE + monitor_flash_len - 1,
-			&flash_info[0]);
+			&flash_info[0] );

 	flash_protect ( FLAG_PROTECT_SET,
 			CFG_ENV_ADDR,
-			CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-			&flash_info[0]);
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );

 	return size;
 }

 /*-----------------------------------------------------------------------
 */
-static void flash_get_offsets (ulong base, flash_info_t * info)
+static void flash_get_offsets (ulong base, flash_info_t *info)
 {
 	int i;

@@ -113,7 +116,7 @@ static void flash_get_offsets (ulong base, flash_info_t * info)

 /*-----------------------------------------------------------------------
 */
-void flash_print_info (flash_info_t * info)
+void flash_print_info (flash_info_t *info)
 {
 	int i;

@@ -141,7 +144,7 @@ void flash_print_info (flash_info_t * info)
 	}

 	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
+			info->size >> 20, info->sector_count);

 	printf ("  Sector Start Addresses:");
 	for (i = 0; i < info->sector_count; ++i) {
@@ -158,7 +161,7 @@ void flash_print_info (flash_info_t * info)
 /*
 * The following code cannot be run from FLASH!
 */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
+static ulong flash_get_size (FPW *addr, flash_info_t *info)
 {
 	volatile FPW value;

@@ -186,6 +189,7 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)

 	mb ();
 	value = addr[1];			/* device ID        */
+
 	switch (value) {

 	case (FPW) INTEL_ID_28F128J3A:
@@ -205,7 +209,7 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 		info->sector_count = CFG_MAX_FLASH_SECT;
 	}

-	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */

 	return (info->size);
 }
@@ -214,7 +218,7 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 /*-----------------------------------------------------------------------
 */

-int flash_erase (flash_info_t * info, int s_first, int s_last)
+int flash_erase (flash_info_t *info, int s_first, int s_last)
 {
 	int flag, prot, sect;
 	ulong type, start, last;
@@ -250,7 +254,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 		printf ("\n");
 	}

-	/*start = get_timer (0); */
+	start = get_timer (0);
 	last = start;

 	/* Disable interrupts which might cause a timeout here */
@@ -281,8 +285,8 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 				}
 			}

-			*addr = (FPW) 0x00500050;	/* clear status register cmd.   */
-			*addr = (FPW) 0x00FF00FF;	/* resest to read mode          */
+			*addr = 0x00500050;	/* clear status register cmd.   */
+			*addr = 0x00FF00FF;	/* resest to read mode          */

 			printf (" done\n");
 		}
@@ -298,7 +302,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 * 4 - Flash not identified
 */

-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
 	ulong cp, wp;
 	FPW data;
@@ -384,7 +388,7 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 * 1 - write timeout
 * 2 - Flash not erased
 */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
+static int write_data (flash_info_t *info, ulong dest, FPW data)
 {
 	FPWV *addr = (FPWV *) dest;
 	ulong status;
@@ -392,7 +396,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)

 	/* Check if Flash is (sufficiently) erased */
 	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
@@ -406,7 +410,6 @@ static int write_data (flash_info_t * info, ulong dest, FPW data)

 	/* wait while polling the status register */
 	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-
 		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
 			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
--- a/board/cerf250/memsetup.S
+++ b/board/cerf250/memsetup.S
@@ -0,0 +1,411 @@
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE:  .long   CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+   .macro CPWAIT reg
+   mrc  p15,0,\reg,c2,c0,0
+   mov  \reg,\reg
+   sub  pc,pc,#4
+   .endm
+
+
+/*
+ * 	Memory setup
+ */
+
+.globl memsetup
+memsetup:
+
+	/* Set up GPIO pins first ----------------------------------------- */
+
+	ldr		r0,	=GPSR0
+	ldr		r1,	=CFG_GPSR0_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPSR1
+	ldr		r1,	=CFG_GPSR1_VAL
+	str		r1,  [r0]
+
+	ldr		r0,	=GPSR2
+	ldr		r1,	=CFG_GPSR2_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPCR0
+	ldr		r1,	=CFG_GPCR0_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPCR1
+	ldr		r1,	=CFG_GPCR1_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPCR2
+	ldr		r1,	=CFG_GPCR2_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPDR0
+	ldr		r1,	=CFG_GPDR0_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPDR1
+	ldr		r1,	=CFG_GPDR1_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GPDR2
+	ldr		r1,	=CFG_GPDR2_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GAFR0_L
+	ldr		r1,	=CFG_GAFR0_L_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GAFR0_U
+	ldr		r1,	=CFG_GAFR0_U_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GAFR1_L
+	ldr		r1,	=CFG_GAFR1_L_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GAFR1_U
+	ldr		r1,	=CFG_GAFR1_U_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GAFR2_L
+	ldr		r1,	=CFG_GAFR2_L_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=GAFR2_U
+	ldr		r1,	=CFG_GAFR2_U_VAL
+	str		r1,	[r0]
+
+	ldr		r0,	=PSSR				/* enable GPIO pins */
+	ldr		r1,	=CFG_PSSR_VAL
+	str		r1,	[r0]
+
+	/* ---------------------------------------------------------------- */
+	/* Enable memory interface                                          */
+	/*                                                                  */
+	/* The sequence below is based on the recommended init steps        */
+	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+	/* Chapter 10.                                                      */
+	/* ---------------------------------------------------------------- */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
+	/*         clocks to settle. Only necessary after hard reset...     */
+	/*         FIXME: can be optimized later                            */
+	/* ---------------------------------------------------------------- */
+
+	ldr		r3,	=OSCR			/* reset the OS Timer Count to zero */
+	mov 	r2,	#0
+	str 	r2,	[r3]
+	ldr 	r4,	=0x300				/* really 0x2E1 is about 200usec,   */
+							/* so 0x300 should be plenty        */
+1:
+	ldr 	r2,	[r3]
+	cmp 	r4,	r2
+	bgt 	1b
+
+mem_init:
+
+	ldr  	r1,	=MEMC_BASE		/* get memory controller base addr. */
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2a: Initialize Asynchronous static memory controller        */
+	/* ---------------------------------------------------------------- */
+
+	/* MSC registers: timing, bus width, mem type                       */
+
+	/* MSC0: nCS(0,1)                                                   */
+	ldr  	r2,	=CFG_MSC0_VAL
+	str  	r2,	[r1, #MSC0_OFFSET]
+	ldr  	r2,	[r1, #MSC0_OFFSET]	/* read back to ensure      */
+						/* that data latches        */
+	/* MSC1: nCS(2,3)                                                   */
+	ldr  	r2,	=CFG_MSC1_VAL
+	str  	r2,	[r1, #MSC1_OFFSET]
+	ldr  	r2,	[r1, #MSC1_OFFSET]
+
+	/* MSC2: nCS(4,5)                                                   */
+	ldr  	r2,	=CFG_MSC2_VAL
+	str  	r2,	[r1, #MSC2_OFFSET]
+	ldr  	r2,	[r1, #MSC2_OFFSET]
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2b: Initialize Card Interface                               */
+	/* ---------------------------------------------------------------- */
+
+	/* MECR: Memory Expansion Card Register                             */
+	ldr  	r2,	=CFG_MECR_VAL
+	str  	r2,	[r1, #MECR_OFFSET]
+	ldr	 	r2,	[r1, #MECR_OFFSET]
+
+	/* MCMEM0: Card Interface slot 0 timing                             */
+	ldr  	r2,	=CFG_MCMEM0_VAL
+	str  	r2,	[r1, #MCMEM0_OFFSET]
+	ldr	 	r2,	[r1, #MCMEM0_OFFSET]
+
+	/* MCMEM1: Card Interface slot 1 timing                             */
+	ldr  	r2,	=CFG_MCMEM1_VAL
+	str  	r2,	[r1, #MCMEM1_OFFSET]
+	ldr	 	r2,	[r1, #MCMEM1_OFFSET]
+
+	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
+	ldr  	r2,	=CFG_MCATT0_VAL
+	str  	r2,	[r1, #MCATT0_OFFSET]
+	ldr	 	r2,	[r1, #MCATT0_OFFSET]
+
+	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
+	ldr  	r2, =CFG_MCATT1_VAL
+	str  	r2, [r1, #MCATT1_OFFSET]
+	ldr	 	r2,	[r1, #MCATT1_OFFSET]
+
+	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
+	ldr  	r2, =CFG_MCIO0_VAL
+	str  	r2, [r1, #MCIO0_OFFSET]
+	ldr	 	r2,	[r1, #MCIO0_OFFSET]
+
+	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
+	ldr  	r2, =CFG_MCIO1_VAL
+	str  	r2, [r1, #MCIO1_OFFSET]
+	ldr	 	r2,	[r1, #MCIO1_OFFSET]
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
+	/* ---------------------------------------------------------------- */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
+	/* ---------------------------------------------------------------- */
+
+	/* Before accessing MDREFR we need a valid DRI field, so we set     */
+	/* this to power on defaults + DRI field, set SDRAM clocks free running */
+
+	ldr  	r3, =CFG_MDREFR_VAL
+	ldr  	r2, =0xFFF
+	and  	r3, r3,  r2
+
+	ldr	 	r0,	[r1, #MDREFR_OFFSET]
+	bic	 	r0, r0, r2
+	bic	 	r0, r0, #(MDREFR_K0FREE|MDREFR_K1FREE|MDREFR_K2FREE)
+	orr	 	r0, r0, r3
+
+	str		r0,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
+	/* ---------------------------------------------------------------- */
+
+	/* Initialize SXCNFG register. Assert the enable bits               */
+
+	/* Write SXMRS to cause an MRS command to all enabled banks of      */
+	/* synchronous static memory. Note that SXLCR need not be written   */
+	/* at this time.                                                    */
+
+	/* FIXME: we use async mode for now                                 */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Step 4: Initialize SDRAM                                         */
+	/* ---------------------------------------------------------------- */
+
+	/* set MDREFR according to user define with exception of a few bits */
+
+	ldr     r4, =CFG_MDREFR_VAL
+	ldr		r2, =(MDREFR_K0RUN|MDREFR_K0DB2|MDREFR_K1RUN|MDREFR_K1DB2|\
+					MDREFR_K2RUN |MDREFR_K2DB2)
+	and		r4, r4, r2
+	bic		r0,	r0,	r2
+	orr		r0, r0, r4
+
+	str     r0, [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+	ldr     r0, [r1, #MDREFR_OFFSET]
+
+	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
+
+	bic		r0, r0,	#(MDREFR_SLFRSH)
+	str     r0, [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+	ldr     r0, [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4c: assert MDREFR:E1PIN and E0PIO as desired, set KXFREE  */
+
+	ldr     r4, =CFG_MDREFR_VAL
+	ldr		r2, =(MDREFR_E0PIN|MDREFR_E1PIN|MDREFR_K0FREE| \
+					MDREFR_K1FREE | MDREFR_K2FREE)
+	and		r4, r4, r2
+	orr		r0, r0, r4
+	str     r0, [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
+	ldr     r0, [r1, #MDREFR_OFFSET]
+
+
+	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
+	/*          configure but not enable each SDRAM partition pair.     */
+
+	ldr		r4,	=CFG_MDCNFG_VAL
+	bic		r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
+	bic		r4, r4,	#(MDCNFG_DE2|MDCNFG_DE3)
+	str     r4, [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
+	ldr     r4, [r1, #MDCNFG_OFFSET]
+
+
+	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
+	/*          100..200 µsec.                                          */
+
+	ldr 	r3, =OSCR			/* reset the OS Timer Count to zero */
+	mov 	r2, #0
+	str 	r2, [r3]
+	ldr 	r4, =0x300			/* really 0x2E1 is about 200usec,   */
+						/* so 0x300 should be plenty        */
+1:
+	ldr 	r2, [r3]
+	cmp 	r4, r2
+	bgt 	1b
+
+
+	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
+	/*          attempting non-burst read or write accesses to disabled */
+	/*          SDRAM, as commonly specified in the power up sequence   */
+	/*          documented in SDRAM data sheets. The address(es) used   */
+	/*          for this purpose must not be cacheable.                 */
+
+	ldr		r3,	=CFG_DRAM_BASE
+.rept 8
+	str		r2,	[r3]
+.endr
+
+	/* Step 4g: Write MDCNFG with enable bits asserted                  */
+	/*          (MDCNFG:DEx set to 1).                                  */
+
+	ldr     r3, [r1, #MDCNFG_OFFSET]
+	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
+	str     r3, [r1, #MDCNFG_OFFSET]
+
+	/* Step 4h: Write MDMRS.                                            */
+
+	ldr     r2, =CFG_MDMRS_VAL
+	str     r2, [r1, #MDMRS_OFFSET]
+
+
+	/* We are finished with Intel's memory controller initialisation    */
+
+
+	/* ---------------------------------------------------------------- */
+	/* Disable (mask) all interrupts at interrupt controller            */
+	/* ---------------------------------------------------------------- */
+
+initirqs:
+
+	mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
+	ldr     r2, =ICLR
+	str     r1, [r2]
+
+	ldr     r2, =ICMR	/* mask all interrupts at the controller    */
+	str     r1, [r2]
+
+
+	/* ---------------------------------------------------------------- */
+	/* Clock initialisation                                             */
+	/* ---------------------------------------------------------------- */
+
+initclks:
+
+	/* Disable the peripheral clocks, and set the core clock frequency  */
+
+	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
+	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
+	ldr     r1, =CKEN
+	mov     r2, #0
+	str     r2, [r1]
+
+
+	/* default value in case no valid rotary switch setting is found    */
+	ldr     r2, =(CCCR_L27|CCCR_M2|CCCR_N10)  /* DEFAULT: {200/200/100} */
+
+	/* ... and write the core clock config register                     */
+	ldr     r1, =CCCR
+	str     r2, [r1]
+
+#ifdef RTC
+	/* enable the 32Khz oscillator for RTC and PowerManager             */
+
+	ldr     r1, =OSCC
+	mov     r2, #OSCC_OON
+	str     r2, [r1]
+
+	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
+	/* has settled.                                                     */
+60:
+	ldr     r2, [r1]
+	ands    r2, r2, #1
+	beq     60b
+#endif
+
+	/* ---------------------------------------------------------------- */
+	/*                                                                  */
+	/* ---------------------------------------------------------------- */
+
+	/* Save SDRAM size */
+    ldr     r1, =DRAM_SIZE
+	str   	r8, [r1]
+
+	/* Interrupt init: Mask all interrupts                              */
+    ldr		r0,	=ICMR /* enable no sources */
+	mov 	r1,	#0
+    str 	r1,	[r0]
+
+	/* FIXME */
+
+#define NODEBUG
+#ifdef NODEBUG
+	/*Disable software and data breakpoints */
+	mov		r0,#0
+	mcr		p15,0,r0,c14,c8,0  /* ibcr0 */
+	mcr		p15,0,r0,c14,c9,0  /* ibcr1 */
+	mcr		p15,0,r0,c14,c4,0  /* dbcon */
+
+	/*Enable all debug functionality */
+	mov		r0,#0x80000000
+	mcr		p14,0,r0,c10,c0,0  /* dcsr */
+
+#endif
+
+	/* ---------------------------------------------------------------- */
+	/* End memsetup                                                     */
+	/* ---------------------------------------------------------------- */
+
+endmemsetup:
+
+    mov     pc,	lr
--- a/board/cerf250/u-boot.lds
+++ b/board/cerf250/u-boot.lds
@@ -21,23 +21,35 @@
 * MA 02111-1307 USA
 */

-/****************************************************************************
- * FLASH Memory Map as used by FADS Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0xFE00_0000     Start of Flash -----------------
- * | MON8xx code           | 0xFE00_0100     Reset Vector
- * +-----------------------+ 0xFE0?_????
- * | (unused)              |
- * +-----------------------+
- * | 			   |
- * +-----------------------+
- * | 			   |
- * +-----------------------+
- * | 			   |
- * +-----------------------+
- * | 			   |
- * +=======================+
- * | 			   |
- * | ...                   |
- *****************************************************************************/
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/pxa/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
--- a/board/cmc_pu2/Makefile
+++ b/board/cmc_pu2/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= at91rm9200dk.o at45.o dm9161.o flash.o
+SOBJS	:= memsetup.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/cmc_pu2/at45.c
+++ b/board/cmc_pu2/at45.c
@@ -0,0 +1,621 @@
+/* Driver for ATMEL DataFlash support
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/hardware.h>
+
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+
+#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
+the Continuous Array Read function */
+
+/* AC Characteristics */
+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS	(0xC << 16)
+#define DATAFLASH_TCHS	(0x1 << 24)
+
+#define AT91C_TIMEOUT_WRDY			200000
+#define AT91C_SPI_PCS0_SERIAL_DATAFLASH		0xE     /* Chip Select 0 : NPCS0 %1110 */
+#define AT91C_SPI_PCS3_DATAFLASH_CARD		0x7     /* Chip Select 3 : NPCS3 %0111 */
+
+void AT91F_SpiInit(void) {
+
+/*-------------------------------------------------------------------*/
+/*	SPI DataFlash Init								*/
+/*-------------------------------------------------------------------*/
+	/* Configure PIOs */
+	AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
+				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
+	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
+				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
+	/* Enable CLock */
+	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
+
+	/* Reset the SPI */
+	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
+
+	/* Configure SPI in Master Mode with No CS selected !!! */
+	AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
+
+	/* Configure CS0 and CS3 */
+	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
+	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
+
+	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
+	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
+
+}
+
+void AT91F_SpiEnable(int cs) {
+	switch(cs) {
+	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
+		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS);
+		break;
+	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
+		/* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */
+		AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7;	/* Set in PIO mode */
+		AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7;	/* Configure in output */
+		/* Clear Output */
+		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
+		/* Configure PCS */
+		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
+		break;
+	}
+
+	/* SPI_Enable */
+	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;
+}
+
+/*----------------------------------------------------------------------------*/
+/* \fn    AT91F_SpiWrite						      */
+/* \brief Set the PDC registers for a transfert				      */
+/*----------------------------------------------------------------------------*/
+unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
+{
+	unsigned int timeout;
+
+	pDesc->state = BUSY;
+
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+
+	/* Initialize the Transmit and Receive Pointer */
+	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
+	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
+
+	/* Intialize the Transmit and Receive Counters */
+	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
+	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
+
+	if ( pDesc->tx_data_size != 0 ) {
+		/* Initialize the Next Transmit and Next Receive Pointer */
+		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
+		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
+
+		/* Intialize the Next Transmit and Next Receive Counters */
+		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
+		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
+	}
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+	timeout = 0;
+
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
+	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+	pDesc->state = IDLE;
+
+	if (timeout >= CFG_SPI_WRITE_TOUT){
+		printf("Error Timeout\n\r");
+		return DATAFLASH_ERROR;
+	}
+
+	return DATAFLASH_OK;
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashSendCommand					*/
+/* \brief Generic function to send a command to the dataflash		*/
+/*----------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char OpCode,
+	unsigned int CmdSize,
+	unsigned int DataflashAddress)
+{
+    unsigned int adr;
+
+	if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
+		return DATAFLASH_BUSY;
+
+	/* process the address to obtain page address and byte address */
+	adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size));
+
+	/* fill the  command  buffer */
+	pDataFlash->pDataFlashDesc->command[0] = OpCode;
+	if (pDataFlash->pDevice->pages_number >= 16384) {
+		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24);
+		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16);
+		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8);
+		pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF);
+	} else {
+		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16);
+		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8);
+		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ;
+		pDataFlash->pDataFlashDesc->command[4] = 0;
+	}
+	pDataFlash->pDataFlashDesc->command[5] = 0;
+	pDataFlash->pDataFlashDesc->command[6] = 0;
+	pDataFlash->pDataFlashDesc->command[7] = 0;
+
+	/* Initialize the SpiData structure for the spi write fuction */
+	pDataFlash->pDataFlashDesc->tx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->tx_cmd_size =  CmdSize ;
+	pDataFlash->pDataFlashDesc->rx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->rx_cmd_size =  CmdSize ;
+
+	/* send the command and read the data */
+	return AT91F_SpiWrite (pDataFlash->pDataFlashDesc);
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashGetStatus					*/
+/* \brief Read the status register of the dataflash			*/
+/*----------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc)
+{
+	AT91S_DataFlashStatus status;
+
+	/* if a transfert is in progress ==> return 0 */
+	if( (pDesc->state) != IDLE)
+		return DATAFLASH_BUSY;
+
+	/* first send the read status command (D7H) */
+	pDesc->command[0] = DB_STATUS;
+	pDesc->command[1] = 0;
+
+	pDesc->DataFlash_state  = GET_STATUS;
+	pDesc->tx_data_size 	= 0 ;	/* Transmit the command and receive response */
+	pDesc->tx_cmd_pt 		= pDesc->command ;
+	pDesc->rx_cmd_pt 		= pDesc->command ;
+	pDesc->rx_cmd_size 		= 2 ;
+	pDesc->tx_cmd_size 		= 2 ;
+	status = AT91F_SpiWrite (pDesc);
+
+	pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
+
+	return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashWaitReady					*/
+/* \brief wait for dataflash ready (bit7 of the status register == 1)	*/
+/*----------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout)
+{
+	pDataFlashDesc->DataFlash_state = IDLE;
+
+	do {
+		AT91F_DataFlashGetStatus(pDataFlashDesc);
+		timeout--;
+	} while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) );
+
+	if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
+		return DATAFLASH_ERROR;
+
+	return DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashContinuousRead 				*/
+/* Object              : Continuous stream Read 				*/
+/* Input Parameters    : DataFlash Service					*/
+/*						: <src> = dataflash address	*/
+/*                     : <*dataBuffer> = data buffer pointer			*/
+/*                     : <sizeToRead> = data buffer size			*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
+	AT91PS_DataFlash pDataFlash,
+	int src,
+	unsigned char *dataBuffer,
+	int sizeToRead )
+{
+	AT91S_DataFlashStatus status;
+	/* Test the size to read in the device */
+	if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
+		return DATAFLASH_MEMORY_OVERFLOW;
+
+	pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
+	pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
+	pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
+	pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
+
+	status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
+	/* Send the command to the dataflash */
+	return(status);
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashPagePgmBuf				*/
+/* Object              : Main memory page program through buffer 1 or buffer 2	*/
+/* Input Parameters    : DataFlash Service					*/
+/*						: <*src> = Source buffer	*/
+/*                     : <dest> = dataflash destination address			*/
+/*                     : <SizeToWrite> = data buffer size			*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int SizeToWrite)
+{
+	int cmdsize;
+	pDataFlash->pDataFlashDesc->tx_data_pt = src ;
+	pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
+	pDataFlash->pDataFlashDesc->rx_data_pt = src;
+	pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
+
+	cmdsize = 4;
+	/* Send the command to the dataflash */
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_MainMemoryToBufferTransfert			*/
+/* Object              : Read a page in the SRAM Buffer 1 or 2			*/
+/* Input Parameters    : DataFlash Service					*/
+/*                     : Page concerned						*/
+/*                     : 							*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int page)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF))
+		return DATAFLASH_BAD_COMMAND;
+
+	/* no data to transmit or receive */
+	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size));
+}
+
+
+/*----------------------------------------------------------------------------- */
+/* Function Name       : AT91F_DataFlashWriteBuffer				*/
+/* Object              : Write data to the internal sram buffer 1 or 2		*/
+/* Input Parameters    : DataFlash Service					*/
+/*			: <BufferCommand> = command to write buffer1 or buffer2	*/
+/*                     : <*dataBuffer> = data buffer to write			*/
+/*                     : <bufferAddress> = address in the internal buffer	*/
+/*                     : <SizeToWrite> = data buffer size			*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned char *dataBuffer,
+	unsigned int bufferAddress,
+	int SizeToWrite )
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE))
+		return DATAFLASH_BAD_COMMAND;
+
+	/* buffer address must be lower than page size */
+	if (bufferAddress > pDataFlash->pDevice->pages_size)
+		return DATAFLASH_BAD_ADDRESS;
+
+	if ( (pDataFlash->pDataFlashDesc->state)  != IDLE)
+		return DATAFLASH_BUSY;
+
+	/* Send first Write Command */
+	pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
+	pDataFlash->pDataFlashDesc->command[1] = 0;
+	if (pDataFlash->pDevice->pages_number >= 16384) {
+	    	pDataFlash->pDataFlashDesc->command[2] = 0;
+	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
+	    	pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
+		cmdsize = 5;
+	} else {
+	    	pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
+	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
+	    	pDataFlash->pDataFlashDesc->command[4] = 0;
+		cmdsize = 4;
+	}
+
+	pDataFlash->pDataFlashDesc->tx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ;
+	pDataFlash->pDataFlashDesc->rx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
+	pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ;
+
+	pDataFlash->pDataFlashDesc->rx_data_pt 	= dataBuffer ;
+	pDataFlash->pDataFlashDesc->tx_data_pt 	= dataBuffer ;
+	pDataFlash->pDataFlashDesc->rx_data_size 	= SizeToWrite ;
+	pDataFlash->pDataFlashDesc->tx_data_size 	= SizeToWrite ;
+
+	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
+}
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_PageErase                                        */
+/* Object              : Erase a page 						*/
+/* Input Parameters    : DataFlash Service					*/
+/*                     : Page concerned						*/
+/*                     : 							*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_PageErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int page)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	/* no data to transmit or receive */
+    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_BlockErase                                       */
+/* Object              : Erase a Block 						*/
+/* Input Parameters    : DataFlash Service					*/
+/*                     : Page concerned						*/
+/*                     : 							*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_BlockErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int block)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	/* no data to transmit or receive */
+    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size));
+}
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_WriteBufferToMain				*/
+/* Object              : Write buffer to the main memory			*/
+/* Input Parameters    : DataFlash Service					*/
+/*		: <BufferCommand> = command to send to buffer1 or buffer2	*/
+/*                     : <dest> = main memory address				*/
+/* Return value		: State of the dataflash				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_WriteBufferToMain (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int dest )
+{
+	int cmdsize;
+	/* Test if the buffer command is correct */
+	if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
+	    (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
+	    (BufferCommand != DB_BUF2_PAGE_PGM) &&
+	    (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
+		return DATAFLASH_BAD_COMMAND;
+
+	/* no data to transmit or receive */
+	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	/* Send the command to the dataflash */
+	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_PartialPageWrite					*/
+/* Object              : Erase partielly a page					*/
+/* Input Parameters    : <page> = page number					*/
+/*			: <AdrInpage> = adr to begin the fading			*/
+/*                     : <length> = Number of bytes to erase			*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_PartialPageWrite (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int size)
+{
+	unsigned int page;
+	unsigned int AdrInPage;
+
+	page = dest / (pDataFlash->pDevice->pages_size);
+	AdrInPage = dest % (pDataFlash->pDevice->pages_size);
+
+	/* Read the contents of the page in the Sram Buffer */
+	AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
+	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+	/*Update the SRAM buffer */
+	AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size);
+
+	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+
+	/* Erase page if a 128 Mbits device */
+	if (pDataFlash->pDevice->pages_number >= 16384) {
+		AT91F_PageErase(pDataFlash, page);
+		/* Rewrite the modified Sram Buffer in the main memory */
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+	}
+
+	/* Rewrite the modified Sram Buffer in the main memory */
+	return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size)));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashWrite					*/
+/* Object              :							*/
+/* Input Parameters    : <*src> = Source buffer					*/
+/*                     : <dest> = dataflash adress				*/
+/*                     : <size> = data buffer size				*/
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWrite(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	int dest,
+	int size )
+{
+	unsigned int length;
+	unsigned int page;
+	unsigned int status;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+	if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
+		return DATAFLASH_MEMORY_OVERFLOW;
+
+	/* If destination does not fit a page start address */
+	if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size)))  != 0 ) {
+		length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
+
+		if (size < length)
+			length = size;
+
+		if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
+			return DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+
+		/* Update size, source and destination pointers */
+		size -= length;
+		dest += length;
+		src += length;
+	}
+
+	while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
+		/* program dataflash page */
+		page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
+
+		status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+
+		status = AT91F_PageErase(pDataFlash, page);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+		if (!status)
+			return DATAFLASH_ERROR;
+
+		status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest);
+		if(!status)
+			return DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+
+		/* Update size, source and destination pointers */
+		size -= pDataFlash->pDevice->pages_size ;
+		dest += pDataFlash->pDevice->pages_size ;
+		src  += pDataFlash->pDevice->pages_size ;
+	}
+
+	/* If still some bytes to read */
+	if ( size > 0 ) {
+		/* program dataflash page */
+		if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
+			return DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
+	}
+	return DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashRead 					*/
+/* Object              : Read a block in dataflash				*/
+/* Input Parameters    : 							*/
+/* Return value		: 							*/
+/*------------------------------------------------------------------------------*/
+int AT91F_DataFlashRead(
+	AT91PS_DataFlash pDataFlash,
+	unsigned long addr,
+	unsigned long size,
+	char *buffer)
+{
+	unsigned long SizeToRead;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+	if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
+		return -1;
+
+	while (size) {
+		SizeToRead = (size < 0x8000)? size:0x8000;
+
+		if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
+			return -1;
+
+		if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK)
+			return -1;
+
+		size -= SizeToRead;
+		addr += SizeToRead;
+		buffer += SizeToRead;
+	}
+
+	return DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataflashProbe 					*/
+/* Object              : 							*/
+/* Input Parameters    : 							*/
+/* Return value	       : Dataflash status register				*/
+/*------------------------------------------------------------------------------*/
+int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
+{
+	AT91F_SpiEnable(cs);
+	AT91F_DataFlashGetStatus(pDesc);
+	return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C);
+}
+
+#endif
--- a/board/cmc_pu2/at91rm9200dk.c
+++ b/board/cmc_pu2/at91rm9200dk.c
@@ -0,0 +1,118 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/AT91RM9200.h>
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Enable Ctrlc */
+	console_init_f ();
+
+	/* Correct IRDA resistor problem */
+	/* Set PA23_TXD in Output */
+	(AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	/* arch number of AT91RM9200DK-Board */
+	gd->bd->bi_arch_number = 251;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+/*
+ * Disk On Chip (NAND) Millenium initialization.
+ * The NAND lives in the CS2* space
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+extern ulong nand_probe (ulong physadr);
+
+#define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
+void nand_init (void)
+{
+	/* Setup Smart Media, fitst enable the address range of CS3 */
+	*AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
+	/* set the bus interface characteristics based on
+	   tDS Data Set up Time 30 - ns
+	   tDH Data Hold Time 20 - ns
+	   tALS ALE Set up Time 20 - ns
+	   16ns at 60 MHz ~= 3  */
+/*memory mapping structures */
+#define SM_ID_RWH	(5 << 28)
+#define SM_RWH		(1 << 28)
+#define SM_RWS		(0 << 24)
+#define SM_TDF		(1 << 8)
+#define SM_NWS		(3)
+	AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
+		AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
+		SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
+
+	/* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
+	*AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+		AT91C_PC3_BFBAA_SMWE;
+	*AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+		AT91C_PC3_BFBAA_SMWE;
+
+	/* Configure PC2 as input (signal READY of the SmartMedia) */
+	*AT91C_PIOC_PER = AT91C_PC2_BFAVD;	/* enable direct output enable */
+	*AT91C_PIOC_ODR = AT91C_PC2_BFAVD;	/* disable output */
+
+	/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
+	*AT91C_PIOB_PER = AT91C_PIO_PB1;	/* enable direct output enable */
+	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */
+
+	/* PIOB and PIOC clock enabling */
+	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
+	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
+
+	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
+		printf ("  No SmartMedia card inserted\n");
+#ifdef DEBUG
+	printf ("  SmartMedia card inserted\n");
+
+	printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
+#endif
+	printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
+}
+#endif
--- a/board/cmc_pu2/config.mk
+++ b/board/cmc_pu2/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x21f00000
--- a/board/cmc_pu2/dm9161.c
+++ b/board/cmc_pu2/dm9161.c
@@ -0,0 +1,243 @@
+/*
+ * (C) Copyright 2003
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <at91rm9200_net.h>
+#include <net.h>
+#include <dm9161.h>
+
+#ifdef CONFIG_DRIVER_ETHER
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+/*
+ * Name:
+ *	dm9161_IsPhyConnected
+ * Description:
+ *	Reads the 2 PHY ID registers
+ * Arguments:
+ *	p_mac - pointer to AT91S_EMAC struct
+ * Return value:
+ *	TRUE - if id read successfully
+ *	FALSE- if error
+ */
+static unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac)
+{
+	unsigned short Id1, Id2;
+
+	at91rm9200_EmacEnableMDIO (p_mac);
+	at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1);
+	at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2);
+	at91rm9200_EmacDisableMDIO (p_mac);
+
+	if ((Id1 == (DM9161_PHYID1_OUI >> 6)) &&
+		((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK)))
+		return TRUE;
+
+	return FALSE;
+}
+
+/*
+ * Name:
+ *	dm9161_GetLinkSpeed
+ * Description:
+ *	Link parallel detection status of MAC is checked and set in the
+ *	MAC configuration registers
+ * Arguments:
+ *	p_mac - pointer to MAC
+ * Return value:
+ *	TRUE - if link status set succesfully
+ *	FALSE - if link status not set
+ */
+static UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
+{
+	unsigned short stat1, stat2;
+
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1))
+		return FALSE;
+
+	if (!(stat1 & DM9161_LINK_STATUS))	/* link status up? */
+		return FALSE;
+
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2))
+		return FALSE;
+
+	if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) {
+		/*set Emac for 100BaseTX and Full Duplex  */
+		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+		return TRUE;
+	}
+
+	if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) {
+		/*set MII for 10BaseT and Full Duplex  */
+		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+				| AT91C_EMAC_FD;
+		return TRUE;
+	}
+
+	if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) {
+		/*set MII for 100BaseTX and Half Duplex  */
+		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+				| AT91C_EMAC_SPD;
+		return TRUE;
+	}
+
+	if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) {
+		/*set MII for 10BaseT and Half Duplex  */
+		p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
+		return TRUE;
+	}
+	return FALSE;
+}
+
+
+/*
+ * Name:
+ *	dm9161_InitPhy
+ * Description:
+ *	MAC starts checking its link by using parallel detection and
+ *	Autonegotiation and the same is set in the MAC configuration registers
+ * Arguments:
+ *	p_mac - pointer to struct AT91S_EMAC
+ * Return value:
+ *	TRUE - if link status set succesfully
+ *	FALSE - if link status not set
+ */
+static UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
+{
+	UCHAR ret = TRUE;
+	unsigned short IntValue;
+
+	at91rm9200_EmacEnableMDIO (p_mac);
+
+	if (!dm9161_GetLinkSpeed (p_mac)) {
+		/* Try another time */
+		ret = dm9161_GetLinkSpeed (p_mac);
+	}
+
+	/* Disable PHY Interrupts */
+	at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
+	/* clear FDX, SPD, Link, INTR masks */
+	IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK |
+		      DM9161_LINK_MASK | DM9161_INTR_MASK);
+	at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
+	at91rm9200_EmacDisableMDIO (p_mac);
+
+	return (ret);
+}
+
+
+/*
+ * Name:
+ *	dm9161_AutoNegotiate
+ * Description:
+ *	MAC Autonegotiates with the partner status of same is set in the
+ *	MAC configuration registers
+ * Arguments:
+ *	dev - pointer to struct net_device
+ * Return value:
+ *	TRUE - if link status set successfully
+ *	FALSE - if link status not set
+ */
+static UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
+{
+	unsigned short value;
+	unsigned short PhyAnar;
+	unsigned short PhyAnalpar;
+
+	/* Set dm9161 control register */
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+	value &= ~DM9161_AUTONEG;	/* remove autonegotiation enable */
+	value |= DM9161_ISOLATE;	/* Electrically isolate PHY */
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+
+	/* Set the Auto_negotiation Advertisement Register */
+	/* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
+	PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
+		  DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
+		return FALSE;
+
+	/* Read the Control Register     */
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+
+	value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE;
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+	/* Restart Auto_negotiation  */
+	value |= DM9161_RESTART_AUTONEG;
+	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+		return FALSE;
+
+	/*check AutoNegotiate complete */
+	udelay (10000);
+	at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value);
+	if (!(value & DM9161_AUTONEG_COMP))
+		return FALSE;
+
+	/* Get the AutoNeg Link partner base page */
+	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar))
+		return FALSE;
+
+	if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) {
+		/*set MII for 100BaseTX and Full Duplex  */
+		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+		return TRUE;
+	}
+
+	if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) {
+		/*set MII for 10BaseT and Full Duplex  */
+		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+				| AT91C_EMAC_FD;
+		return TRUE;
+	}
+	return FALSE;
+}
+
+
+/*
+ * Name:
+ *	at91rm92000_GetPhyInterface
+ * Description:
+ *	Initialise the interface functions to the PHY
+ * Arguments:
+ *	None
+ * Return value:
+ *	None
+ */
+void at91rm92000_GetPhyInterface(AT91PS_PhyOps p_phyops)
+{
+	p_phyops->Init = dm9161_InitPhy;
+	p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
+	p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
+	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
+}
+
+#endif	/* CONFIG_COMMANDS & CFG_CMD_NET */
+
+#endif	/* CONFIG_DRIVER_ETHER */
--- a/board/cmc_pu2/flash.c
+++ b/board/cmc_pu2/flash.c
@@ -0,0 +1,507 @@
+/*
+ * (C) Copyright 2002
+ * Lineo, Inc. <www.lineo.com>
+ * Bernhard Kuhn <bkuhn@lineo.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+ulong myflush(void);
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef
+{
+	unsigned int sector_number;
+	unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgAT49BV16x4[] =
+{
+	{  8,  8*1024 },	/*   8 *  8 kBytes sectors */
+	{  2, 32*1024 },	/*   2 * 32 kBytes sectors */
+	{ 30, 64*1024 },	/*  30 * 64 kBytes sectors */
+};
+
+OrgDef OrgAT49BV16x4A[] =
+{
+	{  8,  8*1024 },	/*   8 *  8 kBytes sectors */
+	{ 31, 64*1024 },	/*  31 * 64 kBytes sectors */
+};
+
+OrgDef OrgAT49BV6416[] =
+{
+	{   8,  8*1024 },	/*   8 *  8 kBytes sectors */
+	{ 127, 64*1024 },	/* 127 * 64 kBytes sectors */
+};
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+
+/* AT49BV1614A Codes */
+#define FLASH_CODE1		0xAA
+#define FLASH_CODE2		0x55
+#define ID_IN_CODE		0x90
+#define ID_OUT_CODE		0xF0
+
+
+#define CMD_READ_ARRAY		0x00F0
+#define CMD_UNLOCK1		0x00AA
+#define CMD_UNLOCK2		0x0055
+#define CMD_ERASE_SETUP		0x0080
+#define CMD_ERASE_CONFIRM	0x0030
+#define CMD_PROGRAM		0x00A0
+#define CMD_UNLOCK_BYPASS	0x0020
+#define CMD_SECTOR_UNLOCK	0x0070
+
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
+
+#define BIT_ERASE_DONE		0x0080
+#define BIT_RDY_MASK		0x0080
+#define BIT_PROGRAM_ERROR	0x0020
+#define BIT_TIMEOUT		0x80000000 /* our flag */
+
+#define READY 1
+#define ERR   2
+#define TMO   4
+
+/*-----------------------------------------------------------------------
+ */
+void flash_identification (flash_info_t * info)
+{
+	volatile u16 manuf_code, device_code, add_device_code;
+
+	MEM_FLASH_ADDR1 = FLASH_CODE1;
+	MEM_FLASH_ADDR2 = FLASH_CODE2;
+	MEM_FLASH_ADDR1 = ID_IN_CODE;
+
+	manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
+	device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
+	add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+
+	MEM_FLASH_ADDR1 = FLASH_CODE1;
+	MEM_FLASH_ADDR2 = FLASH_CODE2;
+	MEM_FLASH_ADDR1 = ID_OUT_CODE;
+
+	/* Vendor type */
+	info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
+	printf ("Atmel: ");
+
+	if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
+
+		if ((add_device_code & FLASH_TYPEMASK) ==
+			(ATM_ID_BV1614A & FLASH_TYPEMASK)) {
+			info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
+			printf ("AT49BV1614A (16Mbit)\n");
+		} else {				/* AT49BV1614 Flash */
+			info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
+			printf ("AT49BV1614 (16Mbit)\n");
+		}
+
+	} else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
+		info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
+		printf ("AT49BV6416 (64Mbit)\n");
+	}
+}
+
+ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
+{
+	int i, nb_sectors = 0;
+
+	for (i=0; i<nb_blocks; i++){
+		nb_sectors += pOrgDef[i].sector_number;
+	}
+
+	return nb_sectors;
+}
+
+void flash_unlock_sector(flash_info_t * info, unsigned int sector)
+{
+	volatile u16 *addr = (volatile u16 *) (info->start[sector]);
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	*addr = CMD_SECTOR_UNLOCK;
+}
+
+
+ulong flash_init (void)
+{
+	int i, j, k;
+	unsigned int flash_nb_blocks, sector;
+	unsigned int start_address;
+	OrgDef *pOrgDef;
+
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		flash_identification (&flash_info[i]);
+
+		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV1614 & FLASH_TYPEMASK)) {
+
+			pOrgDef = OrgAT49BV16x4;
+			flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
+		} else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV1614A & FLASH_TYPEMASK)){	/* AT49BV1614A Flash */
+
+			pOrgDef = OrgAT49BV16x4A;
+			flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
+		} else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV6416 & FLASH_TYPEMASK)){	/* AT49BV6416 Flash */
+
+			pOrgDef = OrgAT49BV6416;
+			flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
+		} else {
+			flash_nb_blocks = 0;
+			pOrgDef = OrgAT49BV16x4;
+		}
+
+		flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
+		memset (flash_info[i].protect, 0, flash_info[i].sector_count);
+
+		if (i == 0)
+			flashbase = PHYS_FLASH_1;
+		else
+			panic ("configured too many flash banks!\n");
+
+		sector = 0;
+		start_address = flashbase;
+		flash_info[i].size = 0;
+
+		for (j = 0; j < flash_nb_blocks; j++) {
+			for (k = 0; k < pOrgDef[j].sector_number; k++) {
+				flash_info[i].start[sector++] = start_address;
+				start_address += pOrgDef[j].sector_size;
+				flash_info[i].size += pOrgDef[j].sector_size;
+			}
+		}
+
+		size += flash_info[i].size;
+
+		if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			(ATM_ID_BV6416 & FLASH_TYPEMASK)){	/* AT49BV6416 Flash */
+
+			/* Unlock all sectors at reset */
+			for (j=0; j<flash_info[i].sector_count; j++){
+				flash_unlock_sector(&flash_info[i], j);
+			}
+		}
+	}
+
+	/* Protect binary boot image */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+
+	/* Protect environment variables */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	/* Protect U-Boot gzipped image */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_U_BOOT_BASE,
+		       CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (ATM_MANUFACT & FLASH_VENDMASK):
+		printf ("Atmel: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (ATM_ID_BV1614 & FLASH_TYPEMASK):
+		printf ("AT49BV1614 (16Mbit)\n");
+		break;
+	case (ATM_ID_BV1614A & FLASH_TYPEMASK):
+		printf ("AT49BV1614A (16Mbit)\n");
+		break;
+	case (ATM_ID_BV6416 & FLASH_TYPEMASK):
+		printf ("AT49BV6416 (64Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		goto Done;
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+
+Done:	;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	ulong result;
+	int iflag, cflag, prot, sect;
+	int rc = ERR_OK;
+	int chip1;
+
+	/* first look for protection bits */
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) !=
+		(ATM_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot)
+		return ERR_PROTECTED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+		printf ("Erasing sector %2d ... ", sect);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked ();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			volatile u16 *addr = (volatile u16 *) (info->start[sect]);
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			*addr = CMD_ERASE_CONFIRM;
+
+			/* wait until flash is ready */
+			chip1 = 0;
+
+			do {
+				result = *addr;
+
+				/* check timeout */
+				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+					chip1 = TMO;
+					break;
+				}
+
+				if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
+					chip1 = READY;
+
+			} while (!chip1);
+
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+			if (chip1 == ERR) {
+				rc = ERR_PROG_ERROR;
+				goto outahere;
+			}
+			if (chip1 == TMO) {
+				rc = ERR_TIMOUT;
+				goto outahere;
+			}
+
+			printf ("ok.\n");
+		} else {			/* it was protected */
+			printf ("protected!\n");
+		}
+	}
+
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
+
+outahere:
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_word (flash_info_t * info, ulong dest,
+								ulong data)
+{
+	volatile u16 *addr = (volatile u16 *) dest;
+	ulong result;
+	int rc = ERR_OK;
+	int cflag, iflag;
+	int chip1;
+
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait until flash is ready */
+	chip1 = 0;
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+			chip1 = ERR | TMO;
+			break;
+		}
+		if (!chip1 && ((result & 0x80) == (data & 0x80)))
+			chip1 = READY;
+
+	} while (!chip1);
+
+	*addr = CMD_READ_ARRAY;
+
+	if (chip1 == ERR || *addr != data)
+		rc = ERR_PROG_ERROR;
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong wp, data;
+	int rc;
+
+	if (addr & 1) {
+		printf ("unaligned destination not supported\n");
+		return ERR_ALIGN;
+	};
+
+	if ((int) src & 1) {
+		printf ("unaligned source not supported\n");
+		return ERR_ALIGN;
+	};
+
+	wp = addr;
+
+	while (cnt >= 2) {
+		data = *((volatile u16 *) src);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 1) {
+		data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
+										   8);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 1;
+		wp += 1;
+		cnt -= 1;
+	};
+
+	return ERR_OK;
+}
--- a/board/cmc_pu2/memsetup.S
+++ b/board/cmc_pu2/memsetup.S
@@ -0,0 +1,200 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the at91rm9200dk board by
+ * (C) Copyright 2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#ifdef CONFIG_BOOTBINFUNC
+/*
+ * some parameters for the board
+ *
+ * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in
+ * turn is based on the boot.bin code from ATMMEL
+ *
+ */
+
+/* flash */
+#define MC_PUIA 0xFFFFFF10
+#define MC_PUIA_VAL 0x00000000
+#define MC_PUP 0xFFFFFF50
+#define MC_PUP_VAL 0x00000000
+#define MC_PUER 0xFFFFFF54
+#define MC_PUER_VAL 0x00000000
+#define MC_ASR 0xFFFFFF04
+#define MC_ASR_VAL 0x00000000
+#define MC_AASR 0xFFFFFF08
+#define MC_AASR_VAL 0x00000000
+#define EBI_CFGR 0xFFFFFF64
+#define EBI_CFGR_VAL 0x00000000
+#define SMC2_CSR 0xFFFFFF70
+#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
+
+/* clocks */
+#define PLLAR 0xFFFFFC28
+#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
+#define PLLBR 0xFFFFFC2C
+#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define MCKR 0xFFFFFC30
+#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
+
+/* sdram */
+#define PIOC_ASR 0xFFFFF870
+#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define PIOC_BSR 0xFFFFF804
+#define PIOC_BSR_VAL 0x00000000
+#define PIOC_PDR 0xFFFFF804
+#define PIOC_PDR_VAL 0xFFFF0000
+#define EBI_CSA 0xFFFFFF60
+#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
+#define SDRC_CR 0xFFFFFF98
+#define SDRC_CR_VAL 0x2188c155
+#define SDRAM 0x20000000 /* address of the SDRAM */
+#define SDRAM1 0x20000080 /* address of the SDRAM */
+#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
+#define SDRC_MR 0xFFFFFF90
+#define SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define SDRC_MR_VAL1 0x00000004 /* refresh */
+#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
+#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
+#define SDRC_TR 0xFFFFFF94
+#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl memsetup
+memsetup:
+	/* memory control configuration */
+	/* this isn't very elegant, but	 what the heck */
+	ldr	r0, =SMRDATA
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	add	r2, r0, #80
+0:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	0b
+	/* delay - this is all done by guess */
+	ldr	r0, =0x00001000
+1:
+	subs	r0, r0, #1
+	bhi	1b
+	ldr	r0, =SMRDATA1
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	add	r2, r0, #176
+2:
+	/* the address */
+	ldr	r1, [r0], #4
+	/* the value */
+	ldr	r3, [r0], #4
+	str	r3, [r1]
+	cmp	r2, r0
+	bne	2b
+
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+
+SMRDATA:
+	.word MC_PUIA
+	.word MC_PUIA_VAL
+	.word MC_PUP
+	.word MC_PUP_VAL
+	.word MC_PUER
+	.word MC_PUER_VAL
+	.word MC_ASR
+	.word MC_ASR_VAL
+	.word MC_AASR
+	.word MC_AASR_VAL
+	.word EBI_CFGR
+	.word EBI_CFGR_VAL
+	.word SMC2_CSR
+	.word SMC2_CSR_VAL
+	.word PLLAR
+	.word PLLAR_VAL
+	.word PLLBR
+	.word PLLBR_VAL
+	.word MCKR
+	.word MCKR_VAL
+	/* SMRDATA is 80 bytes long */
+	/* here there's a delay of 100 */
+SMRDATA1:
+	.word PIOC_ASR
+	.word PIOC_ASR_VAL
+	.word PIOC_BSR
+	.word PIOC_BSR_VAL
+	.word PIOC_PDR
+	.word PIOC_PDR_VAL
+	.word EBI_CSA
+	.word EBI_CSA_VAL
+	.word SDRC_CR
+	.word SDRC_CR_VAL
+	.word SDRC_MR
+	.word SDRC_MR_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRC_MR
+	.word SDRC_MR_VAL1
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRC_MR
+	.word SDRC_MR_VAL2
+	.word SDRAM1
+	.word SDRAM_VAL
+	.word SDRC_TR
+	.word SDRC_TR_VAL
+	.word SDRAM
+	.word SDRAM_VAL
+	.word SDRC_MR
+	.word SDRC_MR_VAL3
+	.word SDRAM
+	.word SDRAM_VAL
+	/* SMRDATA1 is 176 bytes long */
+#endif /* CONFIG_BOOTBINFUNC */
--- a/board/cmc_pu2/u-boot.lds
+++ b/board/cmc_pu2/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/at91rm9200/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
--- a/board/cogent/mb.c
+++ b/board/cogent/mb.c
@@ -235,7 +235,7 @@ int misc_init_f (void)

 long int initdram (int board_type)
 {
-#if CONFIG_CMA111
+#ifdef CONFIG_CMA111
 	return (32L * 1024L * 1024L);
 #else
 	unsigned char dipsw_val;
--- a/board/cogent/mb.h
+++ b/board/cogent/mb.h
@@ -54,7 +54,7 @@
 * i.e. they are 8 bytes apart. For big endian addressing, the 8 bit register
 * will be at byte 7 (the address + 7). For little endian addressing, the
 * register will be at byte 0 (the address + 0). To learn the endianess
- * we must include <asm/byteorder.h>
+ * we must include <endian.h>
 *
 * Take the CMA102 and CMA111 motherboards as examples...
 *
@@ -230,16 +230,20 @@

 #ifndef __ASSEMBLY__

-#include <asm/byteorder.h>
+#ifdef USE_HOSTCC
+#include <endian.h>		/* avoid using private kernel header files */
+#else
+#include <asm/byteorder.h>	/* use U-Boot provided headers */
+#endif

 /* a single CMA10x motherboard i/o register */
 typedef
    struct {
-#if defined(__LITTLE_ENDIAN)
+#if __BYTE_ORDER == __LITTLE_ENDIAN
 	unsigned char value;
 #endif
 	unsigned char filler[7];
-#if defined(__BIG_ENDIAN)
+#if __BYTE_ORDER == __BIG_ENDIAN
 	unsigned char value;
 #endif
    }
@@ -357,7 +361,7 @@ cma_mb_dipsw;
 /* V360EPC PCI Bridge */
 typedef
    struct {
-#if defined(__LITTLE_ENDIAN)
+#if __BYTE_ORDER == __LITTLE_ENDIAN
 	unsigned short v3_pci_vendor;		/* 0x00 */
 	unsigned short v3_pci_device;
 	unsigned short v3_pci_cmd;		/* 0x04 */
@@ -436,7 +440,7 @@ typedef
 	unsigned long  reserved8:24;
 	unsigned long  reserved9[7];		/* 0xe4 */
 #endif
-#if defined(__BIG_ENDIAN)
+#if __BYTE_ORDER == __BIG_ENDIAN
 	unsigned short v3_pci_device;		/* 0x00 */
 	unsigned short v3_pci_vendor;
 	unsigned short v3_pci_stat;		/* 0x04 */
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 #include <pci.h>
+#include <i2c.h>

 int sysControlDisplay(int digit, uchar ascii_code);
 extern void Plx9030Init(void);
@@ -49,7 +50,7 @@ int checkboard(void)
 	ulong busfreq  = get_bus_freq(0);
 	char  buf[32];

-	printf("CPC45 ");
+	puts ("CPC45  ");
 /*
 	printf("Revision %d ", revision);
 */
@@ -58,46 +59,134 @@ int checkboard(void)
 	return 0;
 }

-long int initdram(int board_type)
+long int initdram (int board_type)
 {
-	long size;
-	long new_bank0_end;
-	long mear1;
-	long emear1;
+	int m, row, col, bank, i, ref;
+	unsigned long start, end;
+	uint32_t mccr1, mccr2;
+	uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
+	uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
+	uint8_t mber = 0;
+	unsigned int tmp;

-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);

-	new_bank0_end = size - 1;
-	mear1 = mpc824x_mpc107_getreg(MEAR1);
-	emear1 = mpc824x_mpc107_getreg(EMEAR1);
-	mear1 = (mear1  & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
-	emear1 = (emear1 & 0xFFFFFF00) |
-		((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
-	mpc824x_mpc107_setreg(MEAR1, mear1);
-	mpc824x_mpc107_setreg(EMEAR1, emear1);
+	if (i2c_reg_read (0x50, 2) != 0x04)
+		return 0;	/* Memory type */

-	return (size);
+	m = i2c_reg_read (0x50, 5);	/* # of physical banks */
+	row = i2c_reg_read (0x50, 3);	/* # of rows */
+	col = i2c_reg_read (0x50, 4);	/* # of columns */
+	bank = i2c_reg_read (0x50, 17);	/* # of logical banks */
+	ref  = i2c_reg_read (0x50, 12);	/* refresh rate / type */
+
+	CONFIG_READ_WORD(MCCR1, mccr1);
+	mccr1 &= 0xffff0000;
+
+	CONFIG_READ_WORD(MCCR2, mccr2);
+	mccr2 &= 0xffff0000;
+
+	start = CFG_SDRAM_BASE;
+	end = start + (1 << (col + row + 3) ) * bank - 1;
+
+	for (i = 0; i < m; i++) {
+		mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
+		if (i < 4) {
+			msar1  |= ((start >> 20) & 0xff) << i * 8;
+			emsar1 |= ((start >> 28) & 0xff) << i * 8;
+			mear1  |= ((end >> 20) & 0xff) << i * 8;
+			emear1 |= ((end >> 28) & 0xff) << i * 8;
+		} else {
+			msar2  |= ((start >> 20) & 0xff) << (i-4) * 8;
+			emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
+			mear2  |= ((end >> 20) & 0xff) << (i-4) * 8;
+			emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
+		}
+		mber |= 1 << i;
+		start += (1 << (col + row + 3) ) * bank;
+		end += (1 << (col + row + 3) ) * bank;
+	}
+	for (; i < 8; i++) {
+		if (i < 4) {
+			msar1  |= 0xff << i * 8;
+			emsar1 |= 0x30 << i * 8;
+			mear1  |= 0xff << i * 8;
+			emear1 |= 0x30 << i * 8;
+		} else {
+			msar2  |= 0xff << (i-4) * 8;
+			emsar2 |= 0x30 << (i-4) * 8;
+			mear2  |= 0xff << (i-4) * 8;
+			emear2 |= 0x30 << (i-4) * 8;
+		}
+	}
+
+	switch(ref) {
+		case 0x00:
+		case 0x80:
+			tmp = get_bus_freq(0) / 1000000 * 15625 / 1000 - 22;
+			break;
+		case 0x01:
+		case 0x81:
+			tmp = get_bus_freq(0) / 1000000 * 3900 / 1000 - 22;
+			break;
+		case 0x02:
+		case 0x82:
+			tmp = get_bus_freq(0) / 1000000 * 7800 / 1000 - 22;
+			break;
+		case 0x03:
+		case 0x83:
+			tmp = get_bus_freq(0) / 1000000 * 31300 / 1000 - 22;
+			break;
+		case 0x04:
+		case 0x84:
+			tmp = get_bus_freq(0) / 1000000 * 62500 / 1000 - 22;
+			break;
+		case 0x05:
+		case 0x85:
+			tmp = get_bus_freq(0) / 1000000 * 125000 / 1000 - 22;
+			break;
+		default:
+			tmp = 0x512;
+			break;
+	}
+
+	CONFIG_WRITE_WORD(MCCR1, mccr1);
+	CONFIG_WRITE_WORD(MCCR2, tmp << MCCR2_REFINT_SHIFT);
+	CONFIG_WRITE_WORD(MSAR1, msar1);
+	CONFIG_WRITE_WORD(EMSAR1, emsar1);
+	CONFIG_WRITE_WORD(MEAR1, mear1);
+	CONFIG_WRITE_WORD(EMEAR1, emear1);
+	CONFIG_WRITE_WORD(MSAR2, msar2);
+	CONFIG_WRITE_WORD(EMSAR2, emsar2);
+	CONFIG_WRITE_WORD(MEAR2, mear2);
+	CONFIG_WRITE_WORD(EMEAR2, emear2);
+	CONFIG_WRITE_BYTE(MBER, mber);
+
+	return (1 << (col + row + 3) ) * bank * m;
 }

+
 /*
 * Initialize PCI Devices, report devices found.
 */
-#ifndef CONFIG_PCI_PNP

-static struct pci_config_table pci_sandpoint_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+static struct pci_config_table pci_cpc45_config_table[] = {
+#ifndef CONFIG_PCI_PNP
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0F, PCI_ANY_ID,
 	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
 				       PCI_ENET0_MEMADDR,
 				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0D, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
+				       PCI_PLX9030_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+#endif /*CONFIG_PCI_PNP*/
 	{ }
 };
-#endif
-

 struct pci_controller hose = {
 #ifndef CONFIG_PCI_PNP
-	config_table: pci_sandpoint_config_table,
+	config_table: pci_cpc45_config_table,
 #endif
 };

@@ -108,6 +197,9 @@ void pci_init_board(void)
 	/* init PCI_to_LOCAL Bus BRIDGE */
 	Plx9030Init();

+	/* Clear Display */
+	DISP_CWORD = 0x0;
+
 	sysControlDisplay(0,' ');
 	sysControlDisplay(1,'C');
 	sysControlDisplay(2,'P');
@@ -130,16 +222,14 @@ void pci_init_board(void)
 * RETURNS: NA
 */

-int sysControlDisplay
-    (
-    int digit, 			/* number of digit 0..7 */
-    uchar ascii_code		/* ASCII code */
-    )
+int sysControlDisplay (int digit,	/* number of digit 0..7 */
+		       uchar ascii_code	/* ASCII code */
+		      )
 {
 	if ((digit < 0) || (digit > 7))
 		return (-1);

-	*((volatile uchar*)(DISP_CHR_RAM + digit)) = ascii_code;
+	*((volatile uchar *) (DISP_CHR_RAM + digit)) = ascii_code;

 	return (0);
 }
--- a/board/cpc45/flash.c
+++ b/board/cpc45/flash.c
@@ -41,12 +41,12 @@
 #define MAIN_SECT_SIZE  0x40000
 #define PARAM_SECT_SIZE 0x8000

-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];

-static int write_data (flash_info_t *info, ulong dest, ulong *data);
-static void write_via_fpu(vu_long *addr, ulong *data);
-static __inline__ unsigned long get_msr(void);
-static __inline__ void set_msr(unsigned long msr);
+static int write_data (flash_info_t * info, ulong dest, ulong * data);
+static void write_via_fpu (vu_long * addr, ulong * data);
+static __inline__ unsigned long get_msr (void);
+static __inline__ void set_msr (unsigned long msr);

 /*---------------------------------------------------------------------*/
 #undef	DEBUG_FLASH
@@ -62,102 +62,132 @@ static __inline__ void set_msr(unsigned long msr);
 /*-----------------------------------------------------------------------
 */

-unsigned long flash_init(void)
+unsigned long flash_init (void)
 {
-    int i, j;
-    ulong size = 0;
-    uchar tempChar;
+	int i, j;
+	ulong size = 0;
+	uchar tempChar;
+	vu_long *tmpaddr;

-   /* Enable flash writes on CPC45 */
+	/* Enable flash writes on CPC45 */

-    tempChar = BOARD_CTRL;
+	tempChar = BOARD_CTRL;

-    tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);
+	tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);

-    tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);
+	tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);

-    BOARD_CTRL = tempChar;
+	BOARD_CTRL = tempChar;
+
+	__asm__ volatile ("sync\n eieio");
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		vu_long *addr = (vu_long *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+
+		addr[0] = 0x00900090;
+
+		__asm__ volatile ("sync\n eieio");
+
+		udelay (100);
+
+		DEBUGF ("Flash bank # %d:\n"
+			"\tManuf. ID @ 0x%08lX: 0x%08lX\n"
+			"\tDevice ID @ 0x%08lX: 0x%08lX\n",
+			i,
+			(ulong) (&addr[0]), addr[0],
+			(ulong) (&addr[2]), addr[2]);


-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-	vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+		if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
+		    (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T)) {

-	addr[0] = 0x00900090;
+			flash_info[i].flash_id =
+				(FLASH_MAN_INTEL & FLASH_VENDMASK) |
+				(INTEL_ID_28F160F3T & FLASH_TYPEMASK);

-	DEBUGF ("Flash bank # %d:\n"
-		"\tManuf. ID @ 0x%08lX: 0x%08lX\n"
-		"\tDevice ID @ 0x%08lX: 0x%08lX\n",
-		i,
-		(ulong)(&addr[0]), addr[0],
-		(ulong)(&addr[2]), addr[2]);
+		} else if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT)
+			 && (addr[2] == addr[3])
+			 && (addr[2] == INTEL_ID_28F160C3T)) {

+			flash_info[i].flash_id =
+				(FLASH_MAN_INTEL & FLASH_VENDMASK) |
+				(INTEL_ID_28F160C3T & FLASH_TYPEMASK);

-	if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
-	    (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T))
-	{
-
-	    flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) |
-				     (INTEL_ID_28F160F3T & FLASH_TYPEMASK);
-
-	} else {
-	    flash_info[i].flash_id = FLASH_UNKNOWN;
-	    addr[0] = 0xFFFFFFFF;
-	    goto Done;
-	}
-
-	DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
-
-	addr[0] = 0xFFFFFFFF;
-
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-	for (j = 0; j < flash_info[i].sector_count; j++) {
-		if (j > 30) {
-			flash_info[i].start[j] = CFG_FLASH_BASE +
-						 i * FLASH_BANK_SIZE +
-						 (MAIN_SECT_SIZE * 31) + (j - 31) * PARAM_SECT_SIZE;
 		} else {
-			flash_info[i].start[j] = CFG_FLASH_BASE +
-						 i * FLASH_BANK_SIZE +
-						 j * MAIN_SECT_SIZE;
+			flash_info[i].flash_id = FLASH_UNKNOWN;
+			addr[0] = 0xFFFFFFFF;
+			goto Done;
 		}
-	}
-	size += flash_info[i].size;
-    }

-    /* Protect monitor and environment sectors
-     */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+		DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+
+		addr[0] = 0xFFFFFFFF;
+
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			if (j > 30) {
+				flash_info[i].start[j] = CFG_FLASH_BASE +
+					i * FLASH_BANK_SIZE +
+					(MAIN_SECT_SIZE * 31) + (j -
+								 31) *
+					PARAM_SECT_SIZE;
+			} else {
+				flash_info[i].start[j] = CFG_FLASH_BASE +
+					i * FLASH_BANK_SIZE +
+					j * MAIN_SECT_SIZE;
+			}
+		}
+
+		/* unlock sectors, if 160C3T */
+
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			tmpaddr = (vu_long *) flash_info[i].start[j];
+
+			if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+			    (INTEL_ID_28F160C3T & FLASH_TYPEMASK)) {
+				tmpaddr[0] = 0x00600060;
+				tmpaddr[0] = 0x00D000D0;
+				tmpaddr[1] = 0x00600060;
+				tmpaddr[1] = 0x00D000D0;
+			}
+		}
+
+		size += flash_info[i].size;
+
+		addr[0] = 0x00FF00FF;
+		addr[1] = 0x00FF00FF;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
-    flash_protect(FLAG_PROTECT_SET,
-	      CFG_MONITOR_BASE,
-	      CFG_MONITOR_BASE + monitor_flash_len - 1,
-	      &flash_info[1]);
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_MONITOR_BASE,
+		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       &flash_info[1]);
 #else
-    flash_protect(FLAG_PROTECT_SET,
-	      CFG_MONITOR_BASE,
-	      CFG_MONITOR_BASE + monitor_flash_len - 1,
-	      &flash_info[0]);
-#endif
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_MONITOR_BASE,
+		       CFG_MONITOR_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);
 #endif

 #if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
 #if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
-    flash_protect(FLAG_PROTECT_SET,
-	      CFG_ENV_ADDR,
-	      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-	      &flash_info[1]);
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]);
 #else
-    flash_protect(FLAG_PROTECT_SET,
-	      CFG_ENV_ADDR,
-	      CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-	      &flash_info[0]);
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
 #endif
 #endif

 Done:
-    return size;
+	return size;
 }

 /*-----------------------------------------------------------------------
@@ -179,6 +209,11 @@ void flash_print_info (flash_info_t * info)
 	case (INTEL_ID_28F160F3T & FLASH_TYPEMASK):
 		printf ("28F160F3T (16Mbit)\n");
 		break;
+
+	case (INTEL_ID_28F160C3T & FLASH_TYPEMASK):
+		printf ("28F160C3T (16Mbit)\n");
+		break;
+
 	default:
 		printf ("Unknown Chip Type 0x%04x\n", i);
 		goto Done;
@@ -186,7 +221,7 @@ void flash_print_info (flash_info_t * info)
 	}

 	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
+		info->size >> 20, info->sector_count);

 	printf ("  Sector Start Addresses:");
 	for (i = 0; i < info->sector_count; i++) {
@@ -194,7 +229,7 @@ void flash_print_info (flash_info_t * info)
 			printf ("\n   ");
 		}
 		printf (" %08lX%s", info->start[i],
-				info->protect[i] ? " (RO)" : "     ");
+			info->protect[i] ? " (RO)" : "     ");
 	}
 	printf ("\n");

@@ -205,7 +240,7 @@ Done:
 /*-----------------------------------------------------------------------
 */

-int	flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
 	int flag, prot, sect;
 	ulong start, now, last;
@@ -229,33 +264,32 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	}

 	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
+	for (sect = s_first; sect <= s_last; ++sect) {
 		if (info->protect[sect]) {
 			prot++;
 		}
 	}

 	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
 	} else {
 		printf ("\n");
 	}

 	start = get_timer (0);
-	last  = start;
+	last = start;
 	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
+	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *)(info->start[sect]);
+			vu_long *addr = (vu_long *) (info->start[sect]);

 			DEBUGF ("Erase sect %d @ 0x%08lX\n",
-				sect, (ulong)addr);
+				sect, (ulong) addr);

 			/* Disable interrupts which might cause a timeout
 			 * here.
 			 */
-			flag = disable_interrupts();
+			flag = disable_interrupts ();

 			addr[0] = 0x00500050;	/* clear status register */
 			addr[0] = 0x00200020;	/* erase setup */
@@ -267,23 +301,23 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)

 			/* re-enable interrupts if necessary */
 			if (flag)
-				enable_interrupts();
+				enable_interrupts ();

 			/* wait at least 80us - let's wait 1 ms */
 			udelay (1000);

 			while (((addr[0] & 0x00800080) != 0x00800080) ||
-			       ((addr[1] & 0x00800080) != 0x00800080) ) {
-				if ((now=get_timer(start)) >
-					   CFG_FLASH_ERASE_TOUT) {
+			       ((addr[1] & 0x00800080) != 0x00800080)) {
+				if ((now = get_timer (start)) >
+				    CFG_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
-					addr[0] = 0x00B000B0; /* suspend erase */
-					addr[0] = 0x00FF00FF; /* to read mode  */
+					addr[0] = 0x00B000B0;	/* suspend erase */
+					addr[0] = 0x00FF00FF;	/* to read mode  */
 					return 1;
 				}

 				/* show that we're waiting */
-				if ((now - last) > 1000) {  /* every second  */
+				if ((now - last) > 1000) {	/* every second  */
 					putc ('.');
 					last = now;
 				}
@@ -306,7 +340,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)

 #define	FLASH_WIDTH	8	/* flash bus width in bytes */

-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 	ulong wp, cp, msr;
 	int l, rc, i;
@@ -315,16 +349,16 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	ulong *datal = &data[1];

 	DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
-		addr, (ulong)src, cnt);
+		addr, (ulong) src, cnt);

 	if (info->flash_id == FLASH_UNKNOWN) {
 		return 4;
 	}

-	msr = get_msr();
-	set_msr(msr | MSR_FP);
+	msr = get_msr ();
+	set_msr (msr | MSR_FP);

-	wp = (addr & ~(FLASH_WIDTH-1));	/* get lower aligned address */
+	wp = (addr & ~(FLASH_WIDTH - 1));	/* get lower aligned address */

 	/*
 	 * handle unaligned start bytes
@@ -335,39 +369,35 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		for (i = 0, cp = wp; i < l; i++, cp++) {
 			if (i >= 4) {
 				*datah = (*datah << 8) |
-						((*datal & 0xFF000000) >> 24);
+					((*datal & 0xFF000000) >> 24);
 			}

-			*datal = (*datal << 8) | (*(uchar *)cp);
+			*datal = (*datal << 8) | (*(uchar *) cp);
 		}
 		for (; i < FLASH_WIDTH && cnt > 0; ++i) {
-			char tmp;
-
-			tmp = *src;
-
-			src++;
+			char tmp = *src++;

 			if (i >= 4) {
 				*datah = (*datah << 8) |
-						((*datal & 0xFF000000) >> 24);
+					((*datal & 0xFF000000) >> 24);
 			}

 			*datal = (*datal << 8) | tmp;
-
-			--cnt; ++cp;
+			--cnt;
+			++cp;
 		}

 		for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
 			if (i >= 4) {
 				*datah = (*datah << 8) |
-						((*datal & 0xFF000000) >> 24);
+					((*datal & 0xFF000000) >> 24);
 			}

-			*datal = (*datah << 8) | (*(uchar *)cp);
+			*datal = (*datah << 8) | (*(uchar *) cp);
 		}

-		if ((rc = write_data(info, wp, data)) != 0) {
-			set_msr(msr);
+		if ((rc = write_data (info, wp, data)) != 0) {
+			set_msr (msr);
 			return (rc);
 		}

@@ -378,19 +408,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 * handle FLASH_WIDTH aligned part
 	 */
 	while (cnt >= FLASH_WIDTH) {
-		*datah = *(ulong *)src;
-		*datal = *(ulong *)(src + 4);
-		if ((rc = write_data(info, wp, data)) != 0) {
-			set_msr(msr);
+		*datah = *(ulong *) src;
+		*datal = *(ulong *) (src + 4);
+		if ((rc = write_data (info, wp, data)) != 0) {
+			set_msr (msr);
 			return (rc);
 		}
-		wp  += FLASH_WIDTH;
+		wp += FLASH_WIDTH;
 		cnt -= FLASH_WIDTH;
 		src += FLASH_WIDTH;
 	}

 	if (cnt == 0) {
-		set_msr(msr);
+		set_msr (msr);
 		return (0);
 	}

@@ -399,31 +429,28 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	 */
 	*datah = *datal = 0;
 	for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
-		char tmp;
-
-		tmp = *src;
-
-		src++;
+		char tmp = *src++;

 		if (i >= 4) {
-			*datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+			*datah = (*datah << 8) | ((*datal & 0xFF000000) >>
+						  24);
 		}

 		*datal = (*datal << 8) | tmp;
-
 		--cnt;
 	}

 	for (; i < FLASH_WIDTH; ++i, ++cp) {
 		if (i >= 4) {
-			*datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+			*datah = (*datah << 8) | ((*datal & 0xFF000000) >>
+						  24);
 		}

-		*datal = (*datal << 8) | (*(uchar *)cp);
+		*datal = (*datal << 8) | (*(uchar *) cp);
 	}

-	rc = write_data(info, wp, data);
-	set_msr(msr);
+	rc = write_data (info, wp, data);
+	set_msr (msr);

 	return (rc);
 }
@@ -434,32 +461,32 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 * 1 - write timeout
 * 2 - Flash not erased
 */
-static int write_data (flash_info_t *info, ulong dest, ulong *data)
+static int write_data (flash_info_t * info, ulong dest, ulong * data)
 {
-	vu_long *addr = (vu_long *)dest;
+	vu_long *addr = (vu_long *) dest;
 	ulong start;
 	int flag;

 	/* Check if Flash is (sufficiently) erased */
 	if (((addr[0] & data[0]) != data[0]) ||
-	    ((addr[1] & data[1]) != data[1]) ) {
+	    ((addr[1] & data[1]) != data[1])) {
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
+	flag = disable_interrupts ();

-	addr[0] = 0x00400040;		/* write setup */
-	write_via_fpu(addr, data);
+	addr[0] = 0x00400040;	/* write setup */
+	write_via_fpu (addr, data);

 	/* re-enable interrupts if necessary */
 	if (flag)
-		enable_interrupts();
+		enable_interrupts ();

 	start = get_timer (0);

 	while (((addr[0] & 0x00800080) != 0x00800080) ||
-	       ((addr[1] & 0x00800080) != 0x00800080) ) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+	       ((addr[1] & 0x00800080) != 0x00800080)) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
 			addr[0] = 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
@@ -472,22 +499,24 @@ static int write_data (flash_info_t *info, ulong dest, ulong *data)

 /*-----------------------------------------------------------------------
 */
-static void write_via_fpu(vu_long *addr, ulong *data)
+static void write_via_fpu (vu_long * addr, ulong * data)
 {
-	__asm__ __volatile__ ("lfd  1, 0(%0)" : : "r" (data));
-	__asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr));
+	__asm__ __volatile__ ("lfd  1, 0(%0)"::"r" (data));
+	__asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
 }
+
 /*-----------------------------------------------------------------------
 */
-static __inline__ unsigned long get_msr(void)
+static __inline__ unsigned long get_msr (void)
 {
-    unsigned long msr;
+	unsigned long msr;

-    __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
-    return msr;
+	__asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
+
+	return msr;
 }

-static __inline__ void set_msr(unsigned long msr)
+static __inline__ void set_msr (unsigned long msr)
 {
-    __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+	__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
 }
--- a/board/cpu86/flash.c
+++ b/board/cpu86/flash.c
@@ -41,10 +41,10 @@ ulong flash_int_get_size (volatile unsigned long *baseaddr,
 	info->sector_count = info->size = 0;
 	info->flash_id = FLASH_UNKNOWN;

-	/* Write query command sequence and test FLASH answer
+	/* Write identify command sequence and test FLASH answer
 	 */
-	baseaddr[0] = 0x00980098;
-	baseaddr[1] = 0x00980098;
+	baseaddr[0] = 0x00900090;
+	baseaddr[1] = 0x00900090;

 	flashtest_h = baseaddr[0];	/* manufacturer ID	*/
 	flashtest_l = baseaddr[1];
--- a/board/cradle/cradle.c
+++ b/board/cradle/cradle.c
@@ -186,7 +186,7 @@ board_init (void)
 	led_code (0xf, YELLOW);

 	/* arch number of HHP Cradle */
-	gd->bd->bi_arch_number = 174;
+	gd->bd->bi_arch_number = MACH_TYPE_HHP_CRADLE;

 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
--- a/board/cradle/flash.c
+++ b/board/cradle/flash.c
@@ -30,338 +30,330 @@
 #define FLASH_BANK_SIZE 0x400000
 #define MAIN_SECT_SIZE  0x20000

-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];


 /*-----------------------------------------------------------------------
 */

-ulong flash_init(void)
+ulong flash_init (void)
 {
-   int i, j;
-   ulong size = 0;
+	int i, j;
+	ulong size = 0;

-   for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
-   {
-      ulong flashbase = 0;
-      flash_info[i].flash_id =
-	  (INTEL_MANUFACT & FLASH_VENDMASK) |
-	  (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
-      flash_info[i].size = FLASH_BANK_SIZE;
-      flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-      memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-      switch (i)
-      {
-	 case 0:
-		flashbase = PHYS_FLASH_1;
-		break;
-	 case 1:
-		flashbase = PHYS_FLASH_2;
-		break;
-	 default:
-		panic("configured too many flash banks!\n");
-		break;
-      }
-      for (j = 0; j < flash_info[i].sector_count; j++)
-      {
-	 flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-      }
-      size += flash_info[i].size;
-   }
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;

-   /* Protect monitor and environment sectors
-    */
-   flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + monitor_flash_len - 1,
-		  &flash_info[0]);
+		flash_info[i].flash_id =
+			(INTEL_MANUFACT & FLASH_VENDMASK) |
+			(INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		switch (i) {
+		case 0:
+			flashbase = PHYS_FLASH_1;
+			break;
+		case 1:
+			flashbase = PHYS_FLASH_2;
+			break;
+		default:
+			panic ("configured too many flash banks!\n");
+			break;
+		}
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			flash_info[i].start[j] =
+				flashbase + j * MAIN_SECT_SIZE;
+		}
+		size += flash_info[i].size;
+	}

-   flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-		  &flash_info[0]);
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);

-   return size;
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
 }

 /*-----------------------------------------------------------------------
 */
-void flash_print_info  (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
 {
-   int i, j;
+	int i, j;

-   for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
-   {
-      switch (info->flash_id & FLASH_VENDMASK)
-      {
-	 case (INTEL_MANUFACT & FLASH_VENDMASK):
-		printf("Intel: ");
-		break;
-	 default:
-		printf("Unknown Vendor ");
-		break;
-      }
+	for (j = 0; j < CFG_MAX_FLASH_BANKS; j++) {
+		switch (info->flash_id & FLASH_VENDMASK) {
+		case (INTEL_MANUFACT & FLASH_VENDMASK):
+			printf ("Intel: ");
+			break;
+		default:
+			printf ("Unknown Vendor ");
+			break;
+		}

-      switch (info->flash_id & FLASH_TYPEMASK)
-      {
-	 case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
-		printf("28F320J3A (32Mbit)\n");
-		break;
-	 case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
-		printf("28F128J3 (128Mbit)\n");
-		break;
-	 default:
-		printf("Unknown Chip Type\n");
-		goto Done;
-		break;
-      }
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (INTEL_ID_28F320J3A & FLASH_TYPEMASK):
+			printf ("28F320J3A (32Mbit)\n");
+			break;
+		case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+			printf ("28F128J3 (128Mbit)\n");
+			break;
+		default:
+			printf ("Unknown Chip Type\n");
+			goto Done;
+			break;
+		}

-      printf("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
+		printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);

-      printf("  Sector Start Addresses:");
-      for (i = 0; i < info->sector_count; i++)
-      {
-	 if ((i % 5) == 0)
-	 {
-	    printf ("\n   ");
-	 }
-	 printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-      }
-      printf ("\n");
-      info++;
-   }
+		printf ("  Sector Start Addresses:");
+		for (i = 0; i < info->sector_count; i++) {
+			if ((i % 5) == 0) {
+				printf ("\n   ");
+			}
+			printf (" %08lX%s", info->start[i],
+				info->protect[i] ? " (RO)" : "     ");
+		}
+		printf ("\n");
+		info++;
+	}

-Done:
+Done:	;
 }

 /*-----------------------------------------------------------------------
 */

-int        flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
-   int flag, prot, sect;
-   int rc = ERR_OK;
+	int flag, prot, sect;
+	int rc = ERR_OK;

-   if (info->flash_id == FLASH_UNKNOWN)
-	return ERR_UNKNOWN_FLASH_TYPE;
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;

-   if ((s_first < 0) || (s_first > s_last)) {
-	return ERR_INVAL;
-   }
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}

-   if ((info->flash_id & FLASH_VENDMASK) !=
-	(INTEL_MANUFACT & FLASH_VENDMASK)) {
-	return ERR_UNKNOWN_FLASH_VENDOR;
-   }
+	if ((info->flash_id & FLASH_VENDMASK) !=
+	    (INTEL_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}

-   prot = 0;
-   for (sect=s_first; sect<=s_last; ++sect) {
-      if (info->protect[sect]) {
-	    prot++;
-      }
-   }
-   if (prot)
-	return ERR_PROTECTED;
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot)
+		return ERR_PROTECTED;

-   /*
-    * Disable interrupts which might cause a timeout
-    * here. Remember that our exception vectors are
-    * at address 0 in the flash, and we don't want a
-    * (ticker) exception to happen while the flash
-    * chip is in programming mode.
-    */
-   flag = disable_interrupts();
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();

-   /* Start erase on unprotected sectors */
-   for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {

-      printf("Erasing sector %2d ... ", sect);
+		printf ("Erasing sector %2d ... ", sect);

-      /* arm simple, non interrupt dependent timer */
-      reset_timer_masked();
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked ();

-      if (info->protect[sect] == 0) {        /* not protected */
-	  vu_short *addr = (vu_short *)(info->start[sect]);
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_short *addr = (vu_short *) (info->start[sect]);

-	  *addr = 0x20;        /* erase setup */
-	  *addr = 0xD0;        /* erase confirm */
+			*addr = 0x20;	/* erase setup */
+			*addr = 0xD0;	/* erase confirm */

-	  while ((*addr & 0x80) != 0x80) {
-	     if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
-		*addr = 0xB0; /* suspend erase */
-		*addr = 0xFF;        /* reset to read mode */
-		rc = ERR_TIMOUT;
-		goto outahere;
-	     }
-	  }
+			while ((*addr & 0x80) != 0x80) {
+				if (get_timer_masked () >
+				    CFG_FLASH_ERASE_TOUT) {
+					*addr = 0xB0;	/* suspend erase */
+					*addr = 0xFF;	/* reset to read mode */
+					rc = ERR_TIMOUT;
+					goto outahere;
+				}
+			}

-	  /* clear status register command */
-	  *addr = 0x50;
-	  /* reset to read mode */
-	  *addr = 0xFF;
-      }
-      printf("ok.\n");
-   }
-   if (ctrlc())
-      printf("User Interrupt!\n");
+			/* clear status register command */
+			*addr = 0x50;
+			/* reset to read mode */
+			*addr = 0xFF;
+		}
+		printf ("ok.\n");
+	}
+	if (ctrlc ())
+		printf ("User Interrupt!\n");

 outahere:

-   /* allow flash to settle - wait 10 ms */
-   udelay_masked(10000);
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);

-   if (flag)
-      enable_interrupts();
+	if (flag)
+		enable_interrupts ();

-   return rc;
+	return rc;
 }

 /*-----------------------------------------------------------------------
 * Copy memory to flash
 */

-static int write_word (flash_info_t *info, ulong dest, ushort data)
+static int write_word (flash_info_t * info, ulong dest, ushort data)
 {
-   vu_short *addr = (vu_short *)dest, val;
-   int rc = ERR_OK;
-   int flag;
+	vu_short *addr = (vu_short *) dest, val;
+	int rc = ERR_OK;
+	int flag;

-   /* Check if Flash is (sufficiently) erased
-    */
-   if ((*addr & data) != data)
-      return ERR_NOT_ERASED;
+	/* Check if Flash is (sufficiently) erased
+	 */
+	if ((*addr & data) != data)
+		return ERR_NOT_ERASED;

-   /*
-    * Disable interrupts which might cause a timeout
-    * here. Remember that our exception vectors are
-    * at address 0 in the flash, and we don't want a
-    * (ticker) exception to happen while the flash
-    * chip is in programming mode.
-    */
-   flag = disable_interrupts();
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();

-   /* clear status register command */
-   *addr = 0x50;
+	/* clear status register command */
+	*addr = 0x50;

-   /* program set-up command */
-   *addr = 0x40;
+	/* program set-up command */
+	*addr = 0x40;

-   /* latch address/data */
-   *addr = data;
+	/* latch address/data */
+	*addr = data;

-   /* arm simple, non interrupt dependent timer */
-   reset_timer_masked();
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();

-   /* wait while polling the status register */
-   while(((val = *addr) & 0x80) != 0x80)
-   {
-      if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
-	  rc = ERR_TIMOUT;
-	  /* suspend program command */
-	  *addr = 0xB0;
-	  goto outahere;
-      }
-   }
+	/* wait while polling the status register */
+	while (((val = *addr) & 0x80) != 0x80) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			rc = ERR_TIMOUT;
+			/* suspend program command */
+			*addr = 0xB0;
+			goto outahere;
+		}
+	}

-   if(val & 0x1A) {        /* check for error */
-      printf("\nFlash write error %02x at address %08lx\n",
-	       (int)val, (unsigned long)dest);
-      if(val & (1<<3)) {
-	 printf("Voltage range error.\n");
-	 rc = ERR_PROG_ERROR;
-	 goto outahere;
-      }
-      if(val & (1<<1)) {
-	 printf("Device protect error.\n");
-	 rc = ERR_PROTECTED;
-	 goto outahere;
-      }
-      if(val & (1<<4)) {
-	 printf("Programming error.\n");
-	 rc = ERR_PROG_ERROR;
-	 goto outahere;
-      }
-      rc = ERR_PROG_ERROR;
-      goto outahere;
-   }
+	if (val & 0x1A) {	/* check for error */
+		printf ("\nFlash write error %02x at address %08lx\n",
+			(int) val, (unsigned long) dest);
+		if (val & (1 << 3)) {
+			printf ("Voltage range error.\n");
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
+		if (val & (1 << 1)) {
+			printf ("Device protect error.\n");
+			rc = ERR_PROTECTED;
+			goto outahere;
+		}
+		if (val & (1 << 4)) {
+			printf ("Programming error.\n");
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
+		rc = ERR_PROG_ERROR;
+		goto outahere;
+	}

 outahere:
-   /* read array command */
-   *addr = 0xFF;
+	/* read array command */
+	*addr = 0xFF;

-   if (flag)
-      enable_interrupts();
+	if (flag)
+		enable_interrupts ();

-   return rc;
+	return rc;
 }

 /*-----------------------------------------------------------------------
 * Copy memory to flash.
 */

-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
-   ulong cp, wp;
-   ushort data;
-   int l;
-   int i, rc;
+	ulong cp, wp;
+	ushort data;
+	int l;
+	int i, rc;

-   wp = (addr & ~1);        /* get lower word aligned address */
+	wp = (addr & ~1);	/* get lower word aligned address */

-   /*
-    * handle unaligned start bytes
-    */
-   if ((l = addr - wp) != 0)
-   {
-      data = 0;
-      for (i=0, cp=wp; i<l; ++i, ++cp) {
-	   data = (data >> 8) | (*(uchar *)cp << 8);
-      }
-      for (; i<2 && cnt>0; ++i) {
-	 data = (data >> 8) | (*src++ << 8);
-	 --cnt;
-	 ++cp;
-      }
-      for (; cnt==0 && i<2; ++i, ++cp) {
-	 data = (data >> 8) | (*(uchar *)cp << 8);
-      }
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}

-      if ((rc = write_word(info, wp, data)) != 0) {
-	 return (rc);
-      }
-      wp += 2;
-   }
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}

-   /*
-    * handle word aligned part
-    */
-   while (cnt >= 2) {
-      data = *((vu_short*)src);
-      if ((rc = write_word(info, wp, data)) != 0) {
-	  return (rc);
-      }
-      src += 2;
-      wp  += 2;
-      cnt -= 2;
-   }
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		data = *((vu_short *) src);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}

-   if (cnt == 0) {
-      return ERR_OK;
-   }
+	if (cnt == 0) {
+		return ERR_OK;
+	}

-   /*
-    * handle unaligned tail bytes
-    */
-   data = 0;
-   for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-      data = (data >> 8) | (*src++ << 8);
-      --cnt;
-   }
-   for (; i<2; ++i, ++cp) {
-      data = (data >> 8) | (*(uchar *)cp << 8);
-   }
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 8);
+	}

-   return write_word(info, wp, data);
+	return write_word (info, wp, data);
 }
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -71,7 +71,7 @@ int board_init (void)
 	/* so we do _nothing_ here */

 	/* arch number of CSB226 board */
-	gd->bd->bi_arch_number = 216;
+	gd->bd->bi_arch_number = MACH_TYPE_CSB226;

 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
--- a/board/csb272/csb272.c
+++ b/board/csb272/csb272.c
@@ -21,9 +21,8 @@
 * MA 02111-1307 USA
 */

-#include <asm/u-boot.h>
-#include <asm/processor.h>
 #include <common.h>
+#include <asm/processor.h>
 #include <i2c.h>
 #include <miiphy.h>
 #include <405gp_enet.h>
@@ -57,10 +56,10 @@ int pll_init(void)
 }

 /*
- * board_pre_init: do any preliminary board initialization
+ * board_early_init_f: do early board initialization
 *
 */
-int board_pre_init(void)
+int board_early_init_f(void)
 {
 	/* initialize PLL so UART, LCD, Ethernet clocked at correctly */
 	(void) get_clocks();
--- a/board/csb472/Makefile
+++ b/board/csb472/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+#OBJS	= $(BOARD).o flash.o
+#OBJS	= $(BOARD).o strataflash.o
+OBJS	= $(BOARD).o
+
+SOBJS	= init.o
+
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/csb472/config.mk
+++ b/board/csb472/config.mk
@@ -0,0 +1,36 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004
+# Tolunay Orkun, NextIO Inc., torkun@nextio.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Cogent CSB472 board
+#
+
+LDFLAGS += $(LINKER_UNDEFS)
+
+TEXT_BASE := 0xFFFC0000
+#TEXT_BASE := 0x00100000
+
+PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)
--- a/board/csb472/csb472.c
+++ b/board/csb472/csb472.c
@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2004
+ * Tolunay Orkun, Nextio Inc., torkun@nextio.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <405gp_enet.h>
+
+/*
+ * board_early_init_f: do early board initialization
+ *
+ */
+int board_early_init_f(void)
+{
+   /*-------------------------------------------------------------------------+
+   | Interrupt controller setup for the Walnut board.
+   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+   |       IRQ 16    405GP internally generated; active low; level sensitive
+   |       IRQ 17-24 RESERVED
+   |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+   |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+   |       IRQ 27 (EXT IRQ 2) Not Used
+   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+   | Note for Walnut board:
+   |       An interrupt taken for the FPGA (IRQ 25) indicates that either
+   |       the Mouse, Keyboard, IRDA, or External Expansion caused the
+   |       interrupt. The FPGA must be read to determine which device
+   |       caused the interrupt. The default setting of the FPGA clears
+   |
+   +-------------------------------------------------------------------------*/
+
+	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
+	mtdcr (uicer, 0x00000000);   /* disable all ints */
+	mtdcr (uiccr, 0x00000000);   /* set all to be non-critical */
+	mtdcr (uicpr, 0xFFFFFF83);   /* set int polarities */
+	mtdcr (uictr, 0x10000000);   /* set int trigger levels */
+	mtdcr (uicvcr, 0x00000001);  /* set vect base=0,INT0 highest priority */
+	mtdcr (uicsr, 0xFFFFFFFF);   /* clear all ints */
+
+	mtebc (epcr, 0xa8400000);   /* EBC always driven */
+
+	return 0; /* success */
+}
+
+/*
+ * checkboard: identify/verify the board we are running
+ *
+ * Remark: we just assume it is correct board here!
+ *
+ */
+int checkboard(void)
+{
+	printf("BOARD: Cogent CSB472\n");
+
+	return 0; /* success */
+}
+
+/*
+ * initram: Determine the size of mounted DRAM
+ *
+ * Size is determined by reading SDRAM configuration registers as
+ * configured by initialization code
+ *
+ */
+long initdram (int board_type)
+{
+	ulong tot_size;
+	ulong bank_size;
+	ulong tmp;
+
+	tot_size = 0;
+
+	mtdcr (memcfga, mem_mb0cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	mtdcr (memcfga, mem_mb1cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	mtdcr (memcfga, mem_mb2cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	mtdcr (memcfga, mem_mb3cf);
+	tmp = mfdcr (memcfgd);
+	if (tmp & 0x00000001) {
+		bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+		tot_size += bank_size;
+	}
+
+	return tot_size;
+}
+
+/*
+ * last_stage_init: final configurations (such as PHY etc)
+ *
+ */
+int last_stage_init(void)
+{
+	/* initialize the PHY */
+	miiphy_reset(CONFIG_PHY_ADDR);
+	miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR,
+			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);	/* AUTO neg */
+	miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08);	/* LEDs     */
+
+	return 0; /* success */
+}
--- a/board/csb472/init.S
+++ b/board/csb472/init.S
@@ -0,0 +1,212 @@
+/******************************************************************************
+ *
+ *	 This source code has been made available to you by IBM on an AS-IS
+ *	 basis.	 Anyone receiving this source is licensed under IBM
+ *	 copyrights to use it in any way he or she deems fit, including
+ *	 copying it, modifying it, compiling it, and redistributing it either
+ *	 with or without modifications.	 No license under IBM patents or
+ *	 patent applications is to be implied by the copyright license.
+ *
+ *	 Any user of this software should understand that IBM cannot provide
+ *	 technical support for this software and will not be responsible for
+ *	 any consequences resulting from the use of this software.
+ *
+ *	 Any person who transfers this source code or any derivative work
+ *	 must include the IBM copyright notice, this paragraph, and the
+ *	 preceding two paragraphs in the transferred software.
+ *
+ *	 COPYRIGHT   I B M   CORPORATION 1995
+ *	 LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
+ *
+ *****************************************************************************/
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1	/* avoid reading Linux autoconf.h file	*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define LI32(reg,val) \
+	addis   reg,0,val@h;\
+	ori     reg,reg,val@l
+
+#define WDCR_EBC(reg,val) \
+	addi    r4,0,reg;\
+	mtdcr   ebccfga,r4;\
+	addis   r4,0,val@h;\
+	ori     r4,r4,val@l;\
+	mtdcr   ebccfgd,r4
+
+#define WDCR_SDRAM(reg,val) \
+	addi    r4,0,reg;\
+	mtdcr   memcfga,r4;\
+	addis   r4,0,val@h;\
+	ori     r4,r4,val@l;\
+	mtdcr   memcfgd,r4
+
+/******************************************************************************
+ * Function:	ext_bus_cntlr_init
+ *
+ * Description:	Configures EBC Controller and a few basic chip selects.
+ *
+ *		CS0 is setup to get the Boot Flash out of the addresss range
+ *		so that we may setup a stack.  CS7 is setup so that we can
+ *		access and reset the hardware watchdog.
+ *
+ *		IMPORTANT: For pass1 this code must run from
+ *		cache since you can not reliably change a peripheral banks
+ *		timing register (pbxap) while running code from that bank.
+ *		For ex., since we are running from ROM on bank 0, we can NOT
+ *		execute the code that modifies bank 0 timings from ROM, so
+ *		we run it from cache.
+ *
+ * Notes:	Does NOT use the stack.
+ *****************************************************************************/
+	.section ".text"
+	.align	2
+	.globl	ext_bus_cntlr_init
+	.type	ext_bus_cntlr_init, @function
+ext_bus_cntlr_init:
+	mflr	r0
+	/********************************************************************
+	 * Prefetch entire ext_bus_cntrl_init function into the icache.
+	 * This is necessary because we are going to change the same CS we
+	 * are executing from.  Otherwise a CPU lockup may occur.
+	 *******************************************************************/
+	bl	..getAddr
+..getAddr:
+	mflr	r3			/* get address of ..getAddr */
+
+	/* Calculate number of cache lines for this function */
+	addi	r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+	mtctr	r4
+..ebcloop:
+	icbt	r0, r3			/* prefetch cache line for addr in r3*/
+	addi	r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+	bdnz	..ebcloop		/* continue for $CTR cache lines */
+
+	/********************************************************************
+	 * Delay to ensure all accesses to ROM are complete before changing
+	 * bank 0 timings. 200usec should be enough.
+	 * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
+	 *******************************************************************/
+	addis	r3, 0, 0x0
+	ori	r3, r3, 0xA000		/* wait 200us from reset */
+	mtctr	r3
+..spinlp:
+	bdnz	..spinlp		/* spin loop */
+
+	/********************************************************************
+	 * SETUP CPC0_CR0
+	 *******************************************************************/
+	LI32(r4, 0x00c01030)
+	mtdcr	cntrl0, r4
+
+	/********************************************************************
+	 * Setup CPC0_CR1: Change PCIINT signal to PerWE
+	 *******************************************************************/
+	mfdcr	r4, cntrl1
+	ori	r4, r4, 0x4000
+	mtdcr	cntrl1, r4
+
+	/********************************************************************
+	 * Setup External Bus Controller (EBC).
+	 *******************************************************************/
+	WDCR_EBC(epcr, 0xd84c0000)
+	/********************************************************************
+	 * Memory Bank 0 (Intel 28F640J3 Flash) initialization
+	 *******************************************************************/
+	/*WDCR_EBC(pb0ap, 0x03055200)*/
+	/*WDCR_EBC(pb0ap, 0x04055200)*/
+	WDCR_EBC(pb0ap, 0x08055200)
+	WDCR_EBC(pb0cr, 0xff87a000)
+	/********************************************************************
+	 * Memory Bank 3 (Xilinx XC95144 CPLD) initialization
+	 *******************************************************************/
+	/*WDCR_EBC(pb3ap, 0x07869200)*/
+	WDCR_EBC(pb3ap, 0x04055200)
+	WDCR_EBC(pb3cr, 0xff01c000)
+	/********************************************************************
+	 * Memory Bank 1,2,4-7 (Unused) initialization
+	 *******************************************************************/
+	WDCR_EBC(pb1ap, 0)
+	WDCR_EBC(pb1cr, 0)
+	WDCR_EBC(pb2ap, 0)
+	WDCR_EBC(pb2cr, 0)
+	WDCR_EBC(pb4ap, 0)
+	WDCR_EBC(pb4cr, 0)
+	WDCR_EBC(pb5ap, 0)
+	WDCR_EBC(pb5cr, 0)
+	WDCR_EBC(pb6ap, 0)
+	WDCR_EBC(pb6cr, 0)
+	WDCR_EBC(pb7ap, 0)
+	WDCR_EBC(pb7cr, 0)
+
+	/* We are all done */
+	mtlr	r0			/* Restore link register */
+	blr				/* Return to calling function */
+.Lfe0:	.size	ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
+/* end ext_bus_cntlr_init() */
+
+/******************************************************************************
+ * Function:	sdram_init
+ *
+ * Description:	Configures SDRAM memory banks.
+ *
+ * Notes:	Does NOT use the stack.
+ *****************************************************************************/
+	.section ".text"
+	.align	2
+	.globl	sdram_init
+	.type	sdram_init, @function
+sdram_init:
+
+	/*
+	 * Disable memory controller to allow
+	 * values to be changed.
+	 */
+	WDCR_SDRAM(mem_mcopt1, 0x00000000)
+
+	/*
+	 * Configure Memory Banks
+	 */
+	WDCR_SDRAM(mem_mb0cf, 0x00062001)
+	WDCR_SDRAM(mem_mb1cf, 0x00000000)
+	WDCR_SDRAM(mem_mb2cf, 0x00000000)
+	WDCR_SDRAM(mem_mb3cf, 0x00000000)
+
+	/*
+	 * Set up SDTR1 (SDRAM Timing Register)
+	 */
+	WDCR_SDRAM(mem_sdtr1, 0x00854009)
+
+	/*
+	 * Set RTR (Refresh Timing Register)
+	 */
+	WDCR_SDRAM(mem_rtr,   0x10000000)
+	/* WDCR_SDRAM(mem_rtr,   0x05f00000) */
+
+	/********************************************************************
+	 * Delay to ensure 200usec have elapsed since reset. Assume worst
+	 * case that the core is running 200Mhz:
+	 *	  200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
+	 *******************************************************************/
+	addis   r3, 0, 0x0000
+	ori     r3, r3, 0xA000		/* Wait >200us from reset */
+	mtctr   r3
+..spinlp2:
+	bdnz    ..spinlp2		/* spin loop */
+
+	/********************************************************************
+	 * Set memory controller options reg, MCOPT1.
+	 *******************************************************************/
+	WDCR_SDRAM(mem_mcopt1,0x80800000)
+
+..sdri_done:
+	blr				/* Return to calling function */
+.Lfe1:	.size	sdram_init,.Lfe1-sdram_init
+/* end sdram_init() */
--- a/board/csb472/u-boot.lds
+++ b/board/csb472/u-boot.lds
@@ -0,0 +1,151 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/csb472/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    lib_ppc/extable.o	(.text)
+    lib_ppc/board.o	(.text)
+    lib_generic/zlib.o	(.text)
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/dave/B2/B2.c
+++ b/board/dave/B2/B2.c
@@ -109,7 +109,7 @@ int board_init (void)
    PDATF = temp;

 	/* arch number MACH_TYPE_MBA44B0 */
-	gd->bd->bi_arch_number = 178;
+	gd->bd->bi_arch_number = MACH_TYPE_S3C44B0;

 	/* location of boot parameters */
 	gd->bd->bi_boot_params = 0x0c000100;
--- a/board/dave/B2/flash.c
+++ b/board/dave/B2/flash.c
@@ -45,9 +45,6 @@ unsigned long flash_init (void)
 #else
 	unsigned long size_b0;
 	int i;
-	uint pbcr;
-	unsigned long base_b0;
-	int size_val = 0;

 	/* Init: no FLASHes known */
 	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
--- a/board/dave/B2/u-boot.lds
+++ b/board/dave/B2/u-boot.lds
@@ -51,7 +51,7 @@ SECTIONS
 	armboot_end_data = .;

 	. = ALIGN(4);
+	__bss_start = .;
 	.bss : { *(.bss) }
-
-	armboot_end = .;
+	_end = .;
 }
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -31,25 +31,8 @@

 /* ------------------------------------------------------------------------- */

-#if 0
-#define FPGA_DEBUG
-#endif
-
-/* fpga configuration data - gzip compressed and generated by bin2c */
-const unsigned char fpgadata[] =
-{
-#include "fpgadata.c"
-};
-
-/*
- * include common fpga code (for esd boards)
- */
-#include "../common/fpga.c"
-
-
 /* Prototypes */
-int gunzip(void *, int, unsigned char *, int *);
-
+int gunzip(void *, int, unsigned char *, unsigned long *);

 int board_early_init_f (void)
 {
@@ -60,13 +43,13 @@ int board_early_init_f (void)
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
 	 * IRQ 16    405GP internally generated; active low; level sensitive
 	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 * IRQ 25 (EXT IRQ 0)
+	 * IRQ 26 (EXT IRQ 1)
+	 * IRQ 27 (EXT IRQ 2)
+	 * IRQ 28 (EXT IRQ 3)
+	 * IRQ 29 (EXT IRQ 4)
+	 * IRQ 30 (EXT IRQ 5)
+	 * IRQ 31 (EXT IRQ 6)
 	 */
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
 	mtdcr(uicer, 0x00000000);       /* disable all ints */
@@ -84,11 +67,9 @@ int board_early_init_f (void)
 #else
 	mtebc (epcr, 0x28400000); /* ebc in high-z */
 #endif
-
 	return 0;
 }

-
 /* ------------------------------------------------------------------------- */

 int misc_init_f (void)
@@ -96,11 +77,15 @@ int misc_init_f (void)
 	return 0;  /* dummy implementation */
 }

+extern flash_info_t flash_info[];	/* info for FLASH chips */

 int misc_init_r (void)
 {
-#if 0 /* test-only */
 	DECLARE_GLOBAL_DATA_PTR;
+
+	/* adjust flash start and size as well as the offset */
+	gd->bd->bi_flashstart = 0 - flash_info[0].size;
+	gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
 #if 0
 	volatile unsigned short *fpga_mode =
 		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
@@ -119,7 +104,7 @@ int misc_init_r (void)
 	unsigned long cntrl0Reg;

 	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
 		printf ("GUNZIP ERROR - must RESET board to recover\n");
 		do_reset (NULL, 0, 0, NULL);
 	}
@@ -177,7 +162,6 @@ int misc_init_r (void)
 	udelay(1000); /* wait 1ms */
 	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
 	udelay(1000); /* wait 1ms */
-
 #endif

 #if 0
@@ -192,12 +176,9 @@ int misc_init_r (void)
 	*duart0_mcr = 0x08;
 	*duart1_mcr = 0x08;
 #endif
-#endif
-
 	return (0);
 }

-
 /*
 * Check Board Identity:
 */
@@ -266,8 +247,13 @@ nand_init(void)
 {
 	ulong totlen = 0;

-#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) || \
+/*
+	The HI model is equipped with a large block NAND chip not supported yet
+	by U-Boot
    (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
+*/
+
+#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME)
 	debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
 	totlen += nand_probe (CFG_NAND0_BASE);
 #endif	/* CONFIG_PPCHAMELEON_MODULE_ME, CONFIG_PPCHAMELEON_MODULE_HI */
@@ -278,3 +264,39 @@ nand_init(void)
 	printf ("%4lu MB\n", totlen >>20);
 }
 #endif
+
+#ifdef CONFIG_CFB_CONSOLE
+# ifdef CONFIG_CONSOLE_EXTRA_INFO
+# include <video_fb.h>
+extern GraphicDevice smi;
+
+void video_get_info_str (int line_number, char *info)
+{
+	uint pvr = get_pvr ();
+
+	/* init video info strings for graphic console */
+	switch (line_number) {
+	case 1:
+		switch (pvr) {
+		case PVR_405EP_RB:
+			sprintf (info, " IBM PowerPC 405EP Rev. B");
+			break;
+		default:
+			sprintf (info, " IBM PowerPC 405EP Rev. <unknown>");
+			break;
+		}
+		return;
+	case 2:
+		sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it");
+		return;
+	case 3:
+		sprintf (info, " %s", smi.modeIdent);
+		return;
+	}
+
+	/* no more info lines */
+	*info = 0;
+	return;
+}
+# endif	/* CONFIG_CONSOLE_EXTRA_INFO */
+#endif	/* CONFIG_CFB_CONSOLE */
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -44,12 +44,15 @@ unsigned long flash_init (void)
 #ifdef __DEBUG_START_FROM_SRAM__
 	return CFG_DUMMY_FLASH_SIZE;
 #else
-	unsigned long size_b0;
+	unsigned long size;
 	int i;
 	uint pbcr;
-	unsigned long base_b0;
+	unsigned long base;
 	int size_val = 0;

+	debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
+	debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info);
+
 	/* Init: no FLASHes known */
 	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
@@ -57,22 +60,26 @@ unsigned long flash_init (void)

 	/* Static FLASH Bank configuration here - FIXME XXX */

-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+	debug("[%s, %d] Calling flash_get_size ...\n", __FUNCTION__, __LINE__);
+	size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);

 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
+			size, size<<20);
 	}

+	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
+
 	/* Setup offsets */
-	flash_get_offsets (-size_b0, &flash_info[0]);
+	flash_get_offsets (-size, &flash_info[0]);
+	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);

 	/* Re-do sizing to get full correct info */
 	mtdcr(ebccfga, pb0cr);
 	pbcr = mfdcr(ebccfgd);
 	mtdcr(ebccfga, pb0cr);
-	base_b0 = -size_b0;
-	switch (size_b0) {
+	base = -size;
+	switch (size) {
 	case 1 << 20:
 		size_val = 0;
 		break;
@@ -89,8 +96,9 @@ unsigned long flash_init (void)
 		size_val = 4;
 		break;
 	}
-	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	pbcr = (pbcr & 0x0001ffff) | base | (size_val << 17);
 	mtdcr(ebccfgd, pbcr);
+	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);

 	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
@@ -98,8 +106,9 @@ unsigned long flash_init (void)
 			    0xffffffff,
 			    &flash_info[0]);

-	flash_info[0].size = size_b0;
+	debug("[%s, %d] Test point ...\n", __FUNCTION__, __LINE__);
+	flash_info[0].size  = size;

-	return (size_b0);
+	return (size);
 #endif
 }
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -73,9 +73,6 @@ SECTIONS
    lib_ppc/extable.o	(.text)
    lib_generic/zlib.o		(.text)

-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
    *(.text)
    *(.fixup)
    *(.got1)
@@ -142,6 +139,13 @@ SECTIONS
   *(.bss)
   *(COMMON)
  }
+
+  . = 0xFFFF8000;
+  .ppcenv :
+  {
+    common/environment.o(.ppcenv);
+  }
+
  _end = . ;
  PROVIDE (end = .);
 }
--- a/board/dave/common/flash.c
+++ b/board/dave/common/flash.c
@@ -220,6 +220,8 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	ulong base = (ulong)addr;
 	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;

+	debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__);
+
 	/* Write auto select command: read Manufacturer ID */
 	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
 	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
@@ -669,8 +671,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	int i;

 	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
-	     (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+	if ((*((volatile ulong *)dest) & data) != data) {
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
--- a/board/dbau1x00/README
+++ b/board/dbau1x00/README
@@ -1,30 +1,40 @@
-By Thomas.Lange@corelatus.se 2003-10-06
+By Thomas.Lange@corelatus.se 2004-Oct-05
 ----------------------------------------
-DbAu1000 is a development board from AMD containing
-an Alchemy AU1000 with mips32 core.
+DbAu1xx0 are development boards from AMD containing
+an Alchemy AU1xx0 series cpu with mips32 core.
+Existing cpu:s are Au1000, Au1100, Au1500 and Au1550

 Limitations & comments
 ----------------------
-I assume that you set board to BIG endian!
-Little endian not tested, most probably broken.
+Support was originally big endian only.
+I have not tested, but several u-boot users report working
+configurations in little endian mode.

 I named the board dbau1x00, to allow
 support for all three development boards
-some day ( dbau1000, dbau1100 and dbau1500 ).
+( dbau1000, dbau1100 and dbau1500 ).
+Now there is a new board called dbau1550 also, which
+should be supported RSN.

-I only have a dbau1000, so all testing is limited
-to this board!
+I only have a dbau1000, so my testing is limited
+to this board.

 The board has two different flash banks, that can
 be selected via dip switch. This makes it possible
 to test new bootloaders without thrashing the YAMON
-boot loader deliviered with board.
+boot loader delivered with board.
+
+NOTE! When you switch between the two boot flashes, the
+base addresses will be swapped.
+Have this in mind when you compile u-boot. TEXT_BASE has
+to match the address where u-boot is located when you
+actually launch.

 Ethernet only supported for mac0.

-Pcmcia only supported for slot 0, only 3.3V.
+PCMCIA only supported for slot 0, only 3.3V.

-Pcmcia IDE tested with Sandisk Compact Flash and
+PCMCIA IDE tested with Sandisk Compact Flash and
 IBM microdrive.

 ###################################
@@ -32,7 +42,7 @@ IBM microdrive.
 ###################################
 If you partition a disk on another system (e.g. laptop),
 all bytes will be swapped on 16bit level when using
-PCMCIA!!!!
+PCMCIA and running cpu in big endian mode!!!!

 This is probably due to an error in Au1000 chip.

--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -104,17 +104,17 @@ int checkboard (void)
 		      CFG_PCMCIA_ATTR_BASE, /* Hi */
 		      0x3D000017,           /* Lo0 */
 		      0x3D200017);          /* Lo1 */
-#endif
+#endif	/* 0 */
 	write_one_tlb(22,                   /* index */
 		      0x01ffe000,           /* Pagemask, 16 MB pages */
 		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
 		      0x3E000017,           /* Lo0 */
 		      0x3E200017);          /* Lo1 */
+#endif	/* CONFIG_IDE_PCMCIA */

 	/* Release reset of ethernet PHY chips */
 	/* Always do this, because linux does not know about it */
 	*phy = 3;

 	return 0;
-#endif
 }
--- a/board/dnp1110/dnp1110.c
+++ b/board/dnp1110/dnp1110.c
@@ -39,7 +39,7 @@ int board_init (void)
 	/* so we do _nothing_ here */

 	/* arch number of DNP1110-Board */
-	gd->bd->bi_arch_number = 255;
+	gd->bd->bi_arch_number = MACH_TYPE_DNP1110;

    /* flash vpp on */
    PPDR |= 0x80;	/* assumes LCD controller is off */
--- a/board/eXalion/Makefile
+++ b/board/eXalion/Makefile
@@ -29,7 +29,7 @@ OBJS	= $(BOARD).o
 SOBJS	=

 $(LIB):	.depend $(OBJS) $(SOBJS)
-	$(AR) crv $@ $^
+	$(AR) crv $@ $(OBJS) $(SOBJS)

 #########################################################################

--- a/board/eltec/elppc/misc.c
+++ b/board/eltec/elppc/misc.c
@@ -250,10 +250,6 @@ int misc_init_r (void)
 		 eerev.etheraddr[4], eerev.etheraddr[5]);
 	setenv ("ethaddr", buf);

-	/* set serial console as default */
-	if ((ptr = getenv ("console")) == NULL)
-		setenv ("console", "serial");
-
 	/* print actual board identification */
 	printf ("Ident: %s  Ser %s  Rev %c%c\n",
 		eerev.board, (char *) &eerev.serial,
--- a/board/emk/common/flash.c
+++ b/board/emk/common/flash.c
@@ -40,9 +40,11 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  #define FLASH_CYCLE2	0x02aa
  #define FLASH_ID1		0
  #define FLASH_ID2		1
+  #define FLASH_ID3		0x0e
+  #define FLASH_ID4		0x0F
 #endif

-#if defined (CONFIG_TOP5200)
+#if defined (CONFIG_TOP5200) && !defined (CONFIG_LITE5200)
  typedef unsigned char FLASH_PORT_WIDTH;
  typedef volatile unsigned char FLASH_PORT_WIDTHV;
  #define	FLASH_ID_MASK	0xFF
@@ -54,6 +56,24 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
  #define FLASH_CYCLE2	0x0555
  #define FLASH_ID1		0
  #define FLASH_ID2		2
+  #define FLASH_ID3		0x1c
+  #define FLASH_ID4		0x1E
+#endif
+
+#if defined (CONFIG_TOP5200) && defined (CONFIG_LITE5200)
+  typedef unsigned char FLASH_PORT_WIDTH;
+  typedef volatile unsigned char FLASH_PORT_WIDTHV;
+  #define	FLASH_ID_MASK	0xFF
+
+  #define FPW	FLASH_PORT_WIDTH
+  #define FPWV	FLASH_PORT_WIDTHV
+
+  #define FLASH_CYCLE1	0x0555
+  #define FLASH_CYCLE2	0x02aa
+  #define FLASH_ID1		0
+  #define FLASH_ID2		1
+  #define FLASH_ID3		0x0E
+  #define FLASH_ID4		0x0F
 #endif

 /*-----------------------------------------------------------------------
@@ -183,6 +203,15 @@ void flash_print_info (flash_info_t *info)
 	case FLASH_AM160B:
 		fmt = "29LV160%s (16 Mbit, %s)\n";
 		break;
+	case FLASH_AMLV640U:
+		fmt = "29LV640M (64 Mbit)\n";
+		break;
+	case FLASH_AMDLV065D:
+		fmt = "29LV065D (64 Mbit)\n";
+		break;
+	case FLASH_AMLV256U:
+		fmt = "29LV256M (256 Mbit)\n";
+		break;
 	default:
 		fmt = "Unknown Chip Type\n";
 		break;
@@ -239,7 +268,6 @@ void flash_print_info (flash_info_t *info)
 ulong flash_get_size (FPWV *addr, flash_info_t *info)
 {
 	int		i;
-	ulong	offset;

 	/* Write auto select command: read Manufacturer ID */
 	/* Write auto select command sequence and test FLASH answer */
@@ -278,27 +306,64 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 		info->flash_id += FLASH_AM160B;
 		info->sector_count = 35;
 		info->size = 0x00200000;
-#ifdef CFG_LOWBOOT
-		offset = 0;
-#else
-		offset = 0x00e00000;
-#endif
-		info->start[0] = (ulong)addr + offset;
-		info->start[1] = (ulong)addr + offset + 0x4000;
-		info->start[2] = (ulong)addr + offset + 0x6000;
-		info->start[3] = (ulong)addr + offset + 0x8000;
+		info->start[0] = (ulong)addr;
+		info->start[1] = (ulong)addr + 0x4000;
+		info->start[2] = (ulong)addr + 0x6000;
+		info->start[3] = (ulong)addr + 0x8000;
 		for (i = 4; i < info->sector_count; i++)
 		{
-			info->start[i] = (ulong)addr + offset + 0x10000 * (i-3);
+			info->start[i] = (ulong)addr + 0x10000 * (i-3);
 		}
 		break;

+	case (FPW)AMD_ID_LV065D:
+		info->flash_id += FLASH_AMDLV065D;
+		info->sector_count = 128;
+		info->size = 0x00800000;
+		for (i = 0; i < info->sector_count; i++)
+		{
+			info->start[i] = (ulong)addr + 0x10000 * i;
+		}
+		break;
+
+	case (FPW)AMD_ID_MIRROR:
+		/* MIRROR BIT FLASH, read more ID bytes */
+		if ((FPW)addr[FLASH_ID3] == (FPW)AMD_ID_LV640U_2 &&
+			(FPW)addr[FLASH_ID4] == (FPW)AMD_ID_LV640U_3)
+		{
+			info->flash_id += FLASH_AMLV640U;
+			info->sector_count = 128;
+			info->size = 0x00800000;
+			for (i = 0; i < info->sector_count; i++)
+			{
+				info->start[i] = (ulong)addr + 0x10000 * i;
+			}
+			break;
+		}
+		if ((FPW)addr[FLASH_ID3] == (FPW)AMD_ID_LV256U_2 &&
+			(FPW)addr[FLASH_ID4] == (FPW)AMD_ID_LV256U_3)
+		{
+			/* attention: only the first 16 MB will be used in u-boot */
+			info->flash_id += FLASH_AMLV256U;
+			info->sector_count = 256;
+			info->size = 0x01000000;
+			for (i = 0; i < info->sector_count; i++)
+			{
+				info->start[i] = (ulong)addr + 0x10000 * i;
+			}
+			break;
+		}
+
+		/* fall thru to here ! */
 	default:
-		printf ("unknown AMD device=%x ", (FPW)addr[FLASH_ID2]);
+		printf ("unknown AMD device=%x %x %x",
+			(FPW)addr[FLASH_ID2],
+			(FPW)addr[FLASH_ID3],
+			(FPW)addr[FLASH_ID4]);
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
+		info->size = 0x800000;
+		break;
 	}

 	/* Put FLASH back in read mode */
@@ -329,6 +394,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)

 	switch (info->flash_id & FLASH_TYPEMASK) {
 	case FLASH_AM160B:
+	case FLASH_AMLV640U:
 		break;
 	case FLASH_UNKNOWN:
 	default:
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -57,7 +57,7 @@ long int initdram (int board_type)
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
 	/* precharge all banks */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
-#if CFG_DRAM_DDR
+#ifdef CFG_DRAM_DDR
 	/* set extended mode register */
 	*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
 #endif
@@ -113,11 +113,15 @@ int checkboard (void)
 #if defined (CONFIG_EVAL5200)
 	puts ("Board: EMK TOP5200 on EVAL5200\n");
 #else
+#if defined (CONFIG_LITE5200)
+	puts ("Board: LITE5200\n");
+#else
 #if defined (CONFIG_MINI5200)
 	puts ("Board: EMK TOP5200 on MINI5200\n");
 #else
 	puts ("Board: EMK TOP5200\n");
 #endif
+#endif
 #endif
 	return 0;
 }
@@ -155,10 +159,11 @@ void flash_afterinit(uint bank, ulong start, ulong size)
 *****************************************************************************/
 int misc_init_r (void)
 {
+#if !defined (CONFIG_LITE5200)
 	/* read 'factory' part of EEPROM */
 	extern void read_factory_r (void);
 	read_factory_r ();
-
+#endif
 	return (0);
 }

@@ -175,3 +180,31 @@ void pci_init_board(void)
 	pci_mpc5xxx_init(&hose);
 }
 #endif
+
+/*****************************************************************************
+ * provide the IDE Reset Function
+ *****************************************************************************/
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+#define GPIO_PSC1_4	0x01000000UL
+
+void init_ide_reset (void)
+{
+	debug ("init_ide_reset\n");
+
+    	/* Configure PSC1_4 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+}
+
+void ide_set_reset (int idereset)
+{
+	debug ("ide_reset(%d)\n", idereset);
+
+	if (idereset) {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+	} else {
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+	}
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
--- a/board/ep7312/ep7312.c
+++ b/board/ep7312/ep7312.c
@@ -40,7 +40,7 @@ int board_init (void)
 	IO_LEDFLSH = 0x40;

 	/* arch number MACH_TYPE_EDB7312 */
-	gd->bd->bi_arch_number = 131;
+	gd->bd->bi_arch_number = MACH_TYPE_EDB7312;

 	/* location of boot parameters */
 	gd->bd->bi_boot_params = 0xc0020100;
--- a/board/ep7312/flash.c
+++ b/board/ep7312/flash.c
@@ -109,7 +109,7 @@ void flash_print_info (flash_info_t * info)
 	}
 	printf ("\n");

-  Done:
+Done:	;
 }

 /*-----------------------------------------------------------------------
--- a/board/esd/ar405/Makefile
+++ b/board/esd/ar405/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk

 LIB	= lib$(BOARD).a

-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o ../common/misc.o

 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2004
 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
 *
 * See file CREDITS for list of people who contributed to this
@@ -28,6 +28,7 @@

 /*cmd_boot.c*/
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern void lxt971_no_sleep(void);

 /* ------------------------------------------------------------------------- */

@@ -40,6 +41,10 @@ const unsigned char fpgadata[] = {
 #include "fpgadata.c"
 };

+const unsigned char fpgadata_xl30[] = {
+#include "fpgadata_xl30.c"
+};
+
 /*
 * include common fpga code (for esd boards)
 */
@@ -64,45 +69,52 @@ int board_early_init_f (void)
 	/*
 	 * Boot onboard FPGA
 	 */
+	/* first try 40er image */
+	gd->board_type = 40;
 	status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
 	if (status != 0) {
-		/* booting FPGA failed */
+		/* try xl30er image */
+		gd->board_type = 30;
+		status = fpga_boot ((unsigned char *) fpgadata_xl30, sizeof (fpgadata_xl30));
+		if (status != 0) {
+			/* booting FPGA failed */
 #ifndef FPGA_DEBUG
-		/* set up serial port with default baudrate */
-		(void) get_clocks ();
-		gd->baudrate = CONFIG_BAUDRATE;
-		serial_init ();
-		console_init_f ();
+			/* set up serial port with default baudrate */
+			(void) get_clocks ();
+			gd->baudrate = CONFIG_BAUDRATE;
+			serial_init ();
+			console_init_f ();
 #endif
-		printf ("\nFPGA: Booting failed ");
-		switch (status) {
-		case ERROR_FPGA_PRG_INIT_LOW:
-			printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_DONE:
-			printf ("(Timeout: DONE not high after programming FPGA)\n ");
-			break;
-		}
+			printf ("\nFPGA: Booting failed ");
+			switch (status) {
+			case ERROR_FPGA_PRG_INIT_LOW:
+				printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+				break;
+			case ERROR_FPGA_PRG_INIT_HIGH:
+				printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+				break;
+			case ERROR_FPGA_PRG_DONE:
+				printf ("(Timeout: DONE not high after programming FPGA)\n ");
+				break;
+			}

-		/* display infos on fpgaimage */
-		index = 15;
-		for (i = 0; i < 4; i++) {
-			len = fpgadata[index];
-			printf ("FPGA: %s\n", &(fpgadata[index + 1]));
-			index += len + 3;
+			/* display infos on fpgaimage */
+			index = 15;
+			for (i = 0; i < 4; i++) {
+				len = fpgadata[index];
+				printf ("FPGA: %s\n", &(fpgadata[index + 1]));
+				index += len + 3;
+			}
+			putc ('\n');
+			/* delayed reboot */
+			for (i = 20; i > 0; i--) {
+				printf ("Rebooting in %2d seconds \r", i);
+				for (index = 0; index < 1000; index++)
+					udelay (1000);
+			}
+			putc ('\n');
+			do_reset (NULL, 0, 0, NULL);
 		}
-		putc ('\n');
-		/* delayed reboot */
-		for (i = 20; i > 0; i--) {
-			printf ("Rebooting in %2d seconds \r", i);
-			for (index = 0; index < 1000; index++)
-				udelay (1000);
-		}
-		putc ('\n');
-		do_reset (NULL, 0, 0, NULL);
 	}

 	/*
@@ -139,32 +151,44 @@ int board_early_init_f (void)

 int checkboard (void)
 {
+	DECLARE_GLOBAL_DATA_PTR;
+
 	int index;
 	int len;
 	unsigned char str[64];
 	int i = getenv_r ("serial#", str, sizeof (str));
+	const unsigned char *fpga;

 	puts ("Board: ");

-	if (!i || strncmp (str, "AR405", 5)) {
-		puts ("### No HW ID - assuming AR405\n");
-		return (0);
+	if (i == -1) {
+		puts ("### No HW ID - assuming AR405");
+	} else {
+		puts(str);
 	}

-	puts (str);
-
 	puts ("\nFPGA:  ");

 	/* display infos on fpgaimage */
+	if (gd->board_type == 30) {
+		fpga = fpgadata_xl30;
+	} else {
+		fpga = fpgadata;
+	}
 	index = 15;
 	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		printf ("%s ", &(fpgadata[index + 1]));
+		len = fpga[index];
+		printf ("%s ", &(fpga[index + 1]));
 		index += len + 3;
 	}

 	putc ('\n');

+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+
 	return 0;
 }

--- a/board/esd/ar405/config.mk
+++ b/board/esd/ar405/config.mk
@@ -26,4 +26,5 @@
 #

 #TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFFD0000
+#TEXT_BASE = 0xFFFD0000
+TEXT_BASE = 0xFFFC0000
--- a/board/esd/ar405/flash.c
+++ b/board/esd/ar405/flash.c
@@ -33,18 +33,19 @@
 /*-----------------------------------------------------------------------
 * Functions
 */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static void flash_get_offsets (ulong base, flash_info_t *info);
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);

 /*-----------------------------------------------------------------------
 */

 unsigned long flash_init (void)
 {
-	unsigned long size_b0, size_b1;
+	unsigned long size_b0;
 	int i;
 	uint pbcr;
-	unsigned long base_b0, base_b1;
+	unsigned long base_b0;
+	int size_val = 0;

 	/* Init: no FLASHes known */
 	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
@@ -53,74 +54,48 @@ unsigned long flash_init (void)

 	/* Static FLASH Bank configuration here - FIXME XXX */

-	base_b0 = FLASH_BASE0_PRELIM;
-	size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);

 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 			size_b0, size_b0<<20);
 	}

-	base_b1 = FLASH_BASE1_PRELIM;
-	size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);

 	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);

-	if (size_b1)
-	  {
-	    mtdcr(ebccfga, pb0cr);
-	    pbcr = mfdcr(ebccfgd);
-	    mtdcr(ebccfga, pb0cr);
-	    base_b1 = -size_b1;
-	    pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
-	    mtdcr(ebccfgd, pbcr);
-	    /*          printf("pb1cr = %x\n", pbcr); */
-	  }
-
-	if (size_b0)
-	  {
-	    mtdcr(ebccfga, pb1cr);
-	    pbcr = mfdcr(ebccfgd);
-	    mtdcr(ebccfga, pb1cr);
-	    base_b0 = base_b1 - size_b0;
-	    pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-	    mtdcr(ebccfgd, pbcr);
-	    /*            printf("pb0cr = %x\n", pbcr); */
-	  }
-
-	size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
-
-	flash_get_offsets (base_b0, &flash_info[0]);
-
-	/* monitor protection ON by default */
+	/* Monitor protection ON by default */
 	(void)flash_protect(FLAG_PROTECT_SET,
-			    base_b0+size_b0-monitor_flash_len,
-			    base_b0+size_b0-1,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
 			    &flash_info[0]);

-	if (size_b1) {
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
-
-		flash_get_offsets (base_b1, &flash_info[1]);
-
-		/* monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET,
-				    base_b1+size_b1-monitor_flash_len,
-				    base_b1+size_b1-1,
-				    &flash_info[1]);
-		/* monitor protection OFF by default (one is enough) */
-		(void)flash_protect(FLAG_PROTECT_CLEAR,
-				    base_b0+size_b0-monitor_flash_len,
-				    base_b0+size_b0-1,
-				    &flash_info[0]);
-	} else {
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
 	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;

-	return (size_b0 + size_b1);
+	return (size_b0);
 }
--- a/board/esd/ar405/fpgadata_xl30.c
+++ b/board/esd/ar405/fpgadata_xl30.c
--- a/Show More
+++ b/Show More