Prepare 2009.01-rc2

Update CHANGELOG.

Signed-off-by: Wolfgang Denk <wd@denx.de>

CHANGELOG

@@ -1,3 +1,579 @@
+commit e92c9a860e44c14513c8909ce4299e253a775eeb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jan 14 22:35:30 2009 +0100
+
+    cpu/mpc824x/Makefile: fix warning with parallel builds
+
+    Parallel builds would occasionally issue this build warning:
+
+	ln: creating symbolic link `cpu/mpc824x/bedbug_603e.c': File exists
+
+    Use "ln -sf" as quick work around for the issue.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b5f65dfa9aa8e068e62aba4733dc4fd97b1d9bf6
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Tue Jan 13 16:29:28 2009 -0500
+
+    Some changes of TLB entry setting for MPC8572DS
+
+    - Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode,
+    all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0
+    can not access PIXIS_BASE anymore (any access will cause DataTLBError exception)
+
+    - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 950264317eb9594b2b5ee2fb65206200a1c6007a
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Tue Jan 13 16:29:22 2009 -0500
+
+    Change DDR tlb start entry to CONFIG param for 85xx
+
+    So that we can locate the DDR tlb start entry to the value other than 8. By
+    default, it is still 8.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit 6d3a10f73ece7ffb736890c10e023222612a4aa0
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Fri Jan 9 16:02:35 2009 +0800
+
+    Change PCIE1&2 deciide logic on MPC8544DS board more readable
+
+    The IO port selection for MPC8544DS board:
+     Port			cfg_io_ports
+     PCIE1		0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+     PCIE2		0x4, 0x5, 0x6, 0x7
+     PCIE3		0x6, 0x7
+     This patch changes the PCIE12 and PCIE2 logic more readable.
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 028e116811d28a031660f1ad9e20ac1293b3c5c7
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Fri Jan 9 16:01:52 2009 +0800
+
+    PCIE2 and PCIE3 are decided by corresponing bit in devdisr instead of PCIE1 bit
+
+    PCIE2 and PCIE3 should be decided by corresponing bit in devdisr instead of
+    PCIE1 bit.
+    On MPC8572DS board, PCIE refers to PCIE1.
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 9afc2ef0307aecf52482df67c31b75d5f9e66b47
+Author: Roy Zang <tie-fei.zang@freescale.com>
+Date:	Fri Jan 9 16:00:55 2009 +0800
+
+    Fix IO port selection issue on MPC8544DS and MPC8572DS boards
+
+    The IO port selection is not correct on MPC8572DS and MPC8544DS board.
+     This patch fixes this issue.
+     For MPC8572
+     Port			cfg_io_ports
+     PCIE1		0x2, 0x3, 0x7, 0xb, 0xc, 0xf
+     PCIE2		0x3, 0x7
+     PCIE3		0x7
+
+    For MPC8544
+    Port			cfg_io_ports
+    PCIE1		0x2, 0x3, 0x4, 0x5, 0x6, 0x7
+    PCIE2		0x4, 0x5, 0x6, 0x7
+    PCIE3		0x6, 0x7
+    Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
+
+commit 3e3fffe3baf3befde287fec1fcbfe55052fb8946
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date:	Wed Dec 3 22:36:44 2008 -0600
+
+    mpc8610hpcd: Fix PCI mapping concepts
+
+    Rename _BASE to _BUS, as it's actually a PCI bus address,
+    separate virtual and physical addresses into _VIRT and _PHYS,
+    and use each appopriately.	This makes the code easier to read
+    and understand, and facilitates mapping changes going forward.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit 79e436cad3b4a7db88408c3f05175028f30d700d
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date:	Wed Dec 3 22:36:26 2008 -0600
+
+    sbc8641d: Fix PCI mapping concepts
+
+    Rename _BASE to _BUS, as it's actually a PCI bus address,
+    separate virtual and physical addresses into _VIRT and _PHYS,
+    and use each appopriately.	This makes the code easier to read
+    and understand, and facilitates mapping changes going forward.
+
+    Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit a9f3acbcd07da72b5446ce557531a3ed8b8beff0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Jan 12 14:50:35 2009 +0100
+
+    MPC86xx: fix build warnings
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 032a1c934ef4dc003281f57302b6e693062c1868
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Mon Jan 5 16:09:44 2009 -0500
+
+    bf537-stamp/nand: fix board_nand_init prototype
+
+    The board_nand_init() function should return an int, not void.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 687f952e4119594ab913be11c90f7f018c2a7a79
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Thu Dec 11 07:04:48 2008 -0500
+
+    Blackfin: drop CONFIG_SPI handling in board init
+
+    The eeprom SPI init functions are duplicated as the common code already
+    executes these for us.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e7e684b10d73a303902208594c7c3e7e0d753282
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Fri Oct 24 17:51:57 2008 -0400
+
+    Blackfin: fix out-of-tree building with ldscripts
+
+    Many of the Blackfin board linker scripts are preprocessed, so make sure we
+    output the linker script into the build tree rather than the source tree.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b9eecc342f767b50e1476fbc1aad7d88dd4ce5eb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Fri Oct 24 17:48:54 2008 -0400
+
+    Blackfin: fix linker scripts to work with --gc-sections
+
+    Make sure all .text sections get pulled in and the entry point is properly
+    referenced so they don't get discarded when linking with --gc-sections.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 509fc553bc6087a6f705b3bf52f3950d7d1eaa58
+Author: Mike Frysinger <vapier@gentoo.org>
+Date:	Sat Oct 11 20:45:44 2008 -0400
+
+    Blackfin: set proper LDRFLAGS for parallel booting LDRs
+
+    In order to boot an LDR out of parallel flash, the ldr utility needs a few
+    flags to tell it to generate the right header.
+
+    Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3dd9395a0d7ce69a335d0e743c04b9caedd681d3
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Jan 6 21:41:59 2009 +0100
+
+    at91rm9200: move define from lowlevel_init to header
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 8a48686fac2030287765f1970ea046bd5734b733
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Jan 3 17:22:26 2009 +0100
+
+    m501sk: move to the common memory setup
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d481c80d78f954133c035dae6c7d22de3625795d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Jan 3 17:22:25 2009 +0100
+
+    at91rm9200: rename lowlevel init value to CONFIG_SYS_
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4e170b16625291aa10d0d9abc3f34e8a5945d157
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date:	Tue Jan 6 21:13:14 2009 +0100
+
+    at91: add at91sam9xeek board support
+
+    At91sam9xe is basically an at91sam9260 with embedded flash. We can manage
+    it as another entry for at91sam9260 in the Makefile.
+
+    Check documentation at :
+    http://www.atmel.com/dyn/products/product_card.asp?part_id=4263
+
+    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ffd53db870a7da134f9a1ae76894a6b31237be5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Jan 6 21:15:57 2009 +0100
+
+    fix bmp_logo.h make dependencies to allow parallel build
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e12d9a8fb48d24176efffccc072b445e60a3afe4
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sat Jan 3 17:22:24 2009 +0100
+
+    at91: Fix Atmel's at91sam9 boards out of tree build
+
+    introduced in commit 89a7a87f084c
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0668236bafaa1c11c521652a2facebc74beecbf0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 30 22:56:11 2008 +0100
+
+    README: update mailing list name and hits to patch submission.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9011f9b75561a0bd9254934c2bb2bc799d4f645
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Dec 23 16:32:01 2008 -0600
+
+    85xx: Enable inbound PCI config cycles for X-ES boards cleanup
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1f03cbfae221b24ba1341a0a3f62ff01c5c874df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Tue Dec 23 16:32:00 2008 -0600
+
+    XPedite5200 board support cleanup
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fea91edee8ae0295e3c30b1ff544df51f4d668e1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 2 21:58:04 2008 +0100
+
+    usb_kbd: fix usb_kbd_deregister when DEVICE_DEREGISTER not enable
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Remy Böhmer <linux@bohmer.net>
+
+commit ada591d2a0ecff5f9bc5ed1ebf310f439c3d0a28
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:37 2008 -0800
+
+    mpc8[56]xx: Put localbus clock in sysinfo and gd
+
+    Currently MPC85xx and MPC86xx boards just calculate the localbus frequency
+    and print it out, but don't save it.
+
+    This changes where its calculated and stored to be more consistent with the
+    CPU, CCB, TB, and DDR frequencies and the MPC83xx localbus clock.
+
+    The localbus frequency is added to sysinfo and calculated when sysinfo is
+    set up, in cpu/mpc8[56]xx/speed.c, the same as the other frequencies are.
+
+    get_clocks() copies the frequency into the global data, as the other
+    frequencies are, into a new field that is only enabled for MPC85xx and
+    MPC86xx.
+
+    checkcpu() in cpu/mpc8[56]xx/cpu.c will print out the local bus frequency
+    from sysinfo, like the other frequencies, instead of calculating it on the
+    spot.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9863d6aca11405e1e0d8aba2045d78aeec4d4ee7
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:36 2008 -0800
+
+    mpc86xx: Double local bus clock divider
+
+    The local bus clock divider should be doubled for both 8610 and 8641.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 446c381e3e16f19857b72ea0d06241267b8b9d58
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:35 2008 -0800
+
+    mpc8568: Double local bus clock divider
+
+    The clock divider for the MPC8568 local bus should be doubled, like the
+    other newer MPC85xx chips.
+
+    Since there are now more chips with a 2x divider than a 1x, and any new
+    85xx chips will probably be 2x, invert the sense of the #if so that it
+    lists the 1x chips instead of the 2x ones.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit f51f07eb58fad12de9294ba4ee6c09a0ddeaee03
+Author: Dave Liu <daveliu@freescale.com>
+Date:	Tue Dec 16 12:09:27 2008 +0800
+
+    85xx: Fix the boot window issue
+
+    If one custom board is using the 8MB flash, it is set
+    as FLASH_BASE = 0xef000000, TEXT_BASE = 0xef780000.
+    The current start.S code will be broken at switch_as.
+
+    It is because the TLB1[15] is set as 16MB page size,
+    EPN = TEXT_BASE & 0xff000000, RPN = 0xff000000.
+
+    For the 8MB flash case, the EPN = 0xefxxxxxx,
+    RPN = 0xffxxxxxx. Assume the virt address of switch_as
+    is 0xef7ff18c, the real address of the instruction at
+    switch_as should be 0xff7ff18c. the 0xff7ff18c is out
+    of the range of the default 8MB boot LAW window
+    0xff800000 - 0xffffffff.
+
+    So when we switch to AS1 address space at switch_as,
+    the core can't fetch the instruction at switch_as any
+    more. It will cause broken issue.
+
+    Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 58da8890d5fbd074746037722a423de9ac408616
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Thu Dec 11 15:47:50 2008 -0500
+
+    sbc8548: use proper PHY address
+
+    The values given for the PHY address were wrong, so the code
+    read no valid PHY ID, and fell through to the generic PHY
+    support, which would work on 1000M but would not auto negotiate
+    down to 100M or 10M.
+
+    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit ad22f9273c6f24fbfa917e867680e9688e0c59c5
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Thu Dec 11 15:47:51 2008 -0500
+
+    sbc8548: enable command line editing by default.
+
+    Lets make things a bit more user friendly.	It isn't 1985 anymore.
+
+    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit bd93105fa171184a71ca8b22be03dc2705cfbd3f
+Author: Paul Gortmaker <paul.gortmaker@windriver.com>
+Date:	Thu Dec 11 15:47:49 2008 -0500
+
+    sbc8548: don't enable the 3rd and 4th eTSEC
+
+    These interfaces don't have usable connectors on the board, so don't
+    bother enumerating or configuring them.
+
+    Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
+
+commit 181a3650113883728927928b3ac81ad6dade4b2c
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date:	Wed Dec 3 10:08:19 2008 -0500
+
+    Set IVPR to kenrel entry point in second core boot page
+
+    Assuming the OSes exception vectors start from the base of kernel address, and
+    the kernel physical starting address can be relocated to an non-zero address.
+    This patch enables the second core to have a valid IVPR for debugger before
+    kernel setting IVPR in CAMP mode. Otherwise, IVPR is 0x0 and it is not a valid
+    value for second core which runs kernel at different physical address other
+    than 0x0.
+
+    Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit a5d212a263c58cc746481bf1fc878510533ce7d6
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:34 2008 -0800
+
+    mpc8xxx: LCRR[CLKDIV] is sometimes five bits
+
+    On newer CPUs, 8536, 8572, and 8610, the CLKDIV field of LCRR is five bits
+    instead of four.
+
+    In order to avoid an ifdef, LCRR_CLKDIV is set to 0x1f on all systems.  It
+    should be safe as the fifth bit was defined as reserved and set to 0.
+
+    Code that was using a hard coded 0x0f is changed to use LCRR_CLKDIV.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 58ec4866ed916c7e422f5107bb27b0822084728e
+Author: Trent Piepho <tpiepho@freescale.com>
+Date:	Wed Dec 3 15:16:38 2008 -0800
+
+    mpc8[56]xx: Put localbus clock in device tree
+
+    Export the localbus frequency in the device tree, the same way the CPU, TB,
+    CCB, and various other frequencies are exported in their respective device
+    tree nodes.
+
+    Some localbus devices need this information to be programed correctly, so
+    it makes sense to export it along with the other frequencies.
+
+    Unfortunately, when someone wrote the localbus dts bindings, they didn't
+    bother to define what the "compatible" property should be.	So it seems no
+    one was quite sure what to put in their dts files.
+
+    Based on current existing dts files in the kernel source, I've used
+    "fsl,pq3-localbus" and "fsl,elbc" for MPC85xx, which are used by almost all
+    of the 85xx devices, and are looked for by the Linux code.	The eLBC is
+    apparently not entirely backward compatible with the pq3 LBC and so eLBC
+    equipped platforms like 8572 won't use pq3-localbus.
+
+    For MPC86xx, I've used "fsl,elbc" which is used by some of the 86xx systems
+    and is also looked for by the Linux code.  On MPC8641, I've also used
+    "fsl,mpc8641-localbus" as it is also commonly used in dts files, some of
+    which don't use "fsl,elbc" or any other acceptable name to match on.
+
+    Signed-off-by: Trent Piepho <tpiepho@freescale.com>
+    Acked-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9d94aff699eed38b286814fcbb335f3eb8516a0e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 16 14:59:22 2008 -0600
+
+    NAND FSL elbc: Use virt_to_phys to determine which bank is in use
+
+    The current code that determines which bank/chipselect is used for a
+    given NAND instance only worked for 32-bit addresses and assumed
+    a 1:1 mapping.  This breaks in 36-bit physical configs.
+
+    The proper way to handle this is to use the virt_to_phys() and
+    BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
+    with the the virtual address the NAND code uses.
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+    Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 77c8115b1f1871811633eae77a5a700fac1f0e50
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 16 14:59:21 2008 -0600
+
+    ppc: Use addrmap in virt_to_phys and map_physmem.
+
+    If we have addr map support enabled use the mapping functions to
+    implement virt_to_phys() and map_physmem().
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ecf5b98c7a6a2e2256dfddd48fab26678dcd6b90
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date:	Tue Dec 16 14:59:20 2008 -0600
+
+    85xx: Add support to populate addr map based on TLB settings
+
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 78bbc5ce151c5a484bb51bf1866b4a993ffc16ec
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Mon Dec 1 13:47:13 2008 -0600
+
+    XPedite5200 board support
+
+    Initial support for Extreme Engineering Solutions XPedite5200 -
+    a MPC8548-based PMC single board computer.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 487dcb4fb89be0992bc06ec1341090017bd9cf2f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Oct 29 12:39:27 2008 -0500
+
+    85xx: Enable inbound PCI config cycles for X-ES boards
+
+    Update X-ES Freescale boards to allow inbound PCI configuration
+    cycles when configured as agent/endpoint.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ccf0fdd02b97323f8caae18d06cc9daeac2f192f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Dec 17 16:36:23 2008 -0600
+
+    XPedite5370 board support
+
+    Initial support for Extreme Engineering Solutions XPedite5370 -
+    a MPC8572-based 3U VPX single board computer with a PMC/XMC
+    site.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e92739d34e2d6b6aca93b2598248210710897ce8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Dec 17 16:36:21 2008 -0600
+
+    Add support for PCA953x I2C gpio devices
+
+    Initial support for NXP's 4 and 8 bit I2C gpio expanders
+    (eg pca9537, pca9557, etc). The CONFIG_PCA953X define
+    enables support for the devices while the CONFIG_CMD_PCA953X
+    define enables the pca953x command. The CONFIG_CMD_PCA953X_INFO
+    define enables an 'info' sub-command which provides summary
+    information for the given pca953x device.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7a8979591171676417ab36852d8811a8c46accd8
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date:	Wed Oct 29 12:39:26 2008 -0500
+
+    pci/fsl_pci_init: Enable inbound PCI config cycles
+
+    Add fsl_pci_config_unlock() function to enable a
+    PCI/PCIe interface configured in agent/endpoint mode to
+    respond to inbound PCI configuration cycles.
+
+    Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b616f2b545f73757669b37386f0b37bb61fc6797
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Mon Sep 8 22:27:18 2008 +0200
+
+    MIPS: qemu_mips: update doc to generate and to use qemu flash, ide file
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 16cdf816779f5b602a9b3b4d2ea4dea05095c35b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 16 22:10:31 2008 +0100
+
+    MIPS: qemu_mips: update doc to use all disk and boot linux kernel
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 13095b2f07dacb1f863772266c1789d47a523a8a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Tue Dec 16 22:10:30 2008 +0100
+
+    MIPS: qemu_mips: move env storage just after u-boot
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit aced78d852d0b009e8aaa1445af8cb40861ee549
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Dec 16 23:48:27 2008 +0100
+
+    Prepare 2009.01-rc1
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 9e2a79b4c585ad31138fb90b68fd0234d64a8da8
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Tue Dec 16 23:13:46 2008 +0100
@@ -21,6 +597,18 @@ Date:	Tue Dec 16 22:32:25 2008 +0100
 
     Signed-off-by: Wolfgang Denk <wd@denx.de>
 
+commit ff49ea8977b56916edd5b1766d9939010e30b181
+Author: Scott Wood <scottwood@freescale.com>
+Date:	Tue Dec 16 14:24:16 2008 -0600
+
+    NAND: Mark the BBT as scanned prior to calling scan_bbt.
+
+    Otherwise, recursion can occur if scan_bbt does not find a bad block
+    table, and tries to write one, and the attempt to erase the BBT area
+    causes a bad block check.
+
+    Signed-off-by: Scott Wood <scottwood@freescale.com>
+
 commit 584eedab66d0828f2d571a24b10526c4e65f547b
 Author: Ilya Yanok <yanok@emcraft.com>
 Date:	Thu Dec 11 05:51:57 2008 +0300

MAINTAINERS

@@ -411,6 +411,10 @@ Rune Torgersen <runet@innovsys.com>
 
 	MPC8266ADS	MPC8266
 
+Peter Tyser <ptyser@xes-inc.com>
+
+	XPEDITE5200	MPC8548
+	XPEDITE5370	MPC8572
 
 David Updegraff <dave@cray.com>
 

MAKEALL

@@ -385,6 +385,8 @@ LIST_85xx="		\
 	TQM8548		\
 	TQM8555		\
 	TQM8560		\
+	XPEDITE5200	\
+	XPEDITE5370	\
 "
 
 #########################################################################

Makefile

@@ -228,6 +228,7 @@ LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/block/libblock.a
 LIBS += drivers/dma/libdma.a
 LIBS += drivers/fpga/libfpga.a
+LIBS += drivers/gpio/libgpio.a
 LIBS += drivers/hwmon/libhwmon.a
 LIBS += drivers/i2c/libi2c.a
 LIBS += drivers/input/libinput.a
@@ -347,7 +348,7 @@ $(obj)u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
 $(OBJS):	depend $(obj)include/autoconf.mk
 		$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 
-$(LIBS):	depend $(obj)include/autoconf.mk
+$(LIBS):	depend $(obj)include/autoconf.mk $(SUBDIRS)
 		$(MAKE) -C $(dir $(subst $(obj),,$@))
 
 $(LIBBOARD):	depend $(LIBS) $(obj)include/autoconf.mk
@@ -407,6 +408,7 @@ TAG_SUBDIRS += disk
 TAG_SUBDIRS += common
 TAG_SUBDIRS += drivers/bios_emulator
 TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/gpio
 TAG_SUBDIRS += drivers/hwmon
 TAG_SUBDIRS += drivers/i2c
 TAG_SUBDIRS += drivers/input
@@ -2461,6 +2463,12 @@ TQM8560_config:		unconfig
 	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
 	@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
 
+XPEDITE5200_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
+
+XPEDITE5370_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5370 xes
+
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
@@ -2594,6 +2602,7 @@ at91sam9260ek_nandflash_config \
 at91sam9260ek_dataflash_cs0_config \
 at91sam9260ek_dataflash_cs1_config \
 at91sam9260ek_config	:	unconfig
+	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2606,10 +2615,28 @@ at91sam9260ek_config	:	unconfig
 	fi;
 	@$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91
 
+at91sam9xeek_nandflash_config \
+at91sam9xeek_dataflash_cs0_config \
+at91sam9xeek_dataflash_cs1_config \
+at91sam9xeek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	else \
+		echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \
+	fi;
+	@$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9
+
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
 at91sam9261ek_dataflash_cs3_config \
 at91sam9261ek_config	:	unconfig
+	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2626,6 +2653,7 @@ at91sam9263ek_nandflash_config \
 at91sam9263ek_dataflash_config \
 at91sam9263ek_dataflash_cs0_config \
 at91sam9263ek_config	:	unconfig
+	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in NAND FLASH" ; \
@@ -2639,6 +2667,7 @@ at91sam9rlek_nandflash_config \
 at91sam9rlek_dataflash_config \
 at91sam9rlek_dataflash_cs0_config \
 at91sam9rlek_config	:	unconfig
+	@mkdir -p $(obj)include
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in NAND FLASH" ; \

README

@@ -621,6 +621,8 @@ The following options need to be configured:
 		CONFIG_CMD_MII		* MII utility commands
 		CONFIG_CMD_NAND		* NAND support
 		CONFIG_CMD_NET		  bootp, tftpboot, rarpboot
+		CONFIG_CMD_PCA953X	* PCA953x I2C gpio commands
+		CONFIG_CMD_PCA953X_INFO	* PCA953x I2C gpio info command
 		CONFIG_CMD_PCI		* pciinfo
 		CONFIG_CMD_PCMCIA		* PCMCIA support
 		CONFIG_CMD_PING		* send ICMP ECHO_REQUEST to network
@@ -698,6 +700,13 @@ The following options need to be configured:
 		Note that if the RTC uses I2C, then the I2C interface
 		must also be configured. See I2C Support, below.
 
+- GPIO Support:
+		CONFIG_PCA953X		- use NXP's PCA953X series I2C GPIO
+		CONFIG_PCA953X_INFO	- enable pca953x info command
+
+		Note that if the GPIO device uses I2C, then the I2C interface
+		must also be configured. See I2C Support, below.
+
 - Timestamp Support:
 
 		When CONFIG_TIMESTAMP is selected, the timestamp
@@ -3731,7 +3740,7 @@ MPC826x processors), on others (parts of) the data cache can be
 locked as (mis-) used as memory, etc.
 
 	Chris Hallinan posted a good summary of these issues to the
-	u-boot-users mailing list:
+	U-Boot mailing list:
 
 	Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
 	From: "Chris Hallinan" <clh@net1plus.com>
@@ -3941,7 +3950,7 @@ int main (int argc, char *argv[])
 
 	Download latest U-Boot source;
 
-	Subscribe to u-boot-users mailing list;
+	Subscribe to u-boot mailing list;
 
 	if (clueless) {
 		email ("Hi, I am new to U-Boot, how do I get started?");
@@ -4018,10 +4027,11 @@ Since the number of patches for U-Boot is growing, we need to
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.
 
-Patches shall be sent to the u-boot-users mailing list.
-
 Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
+Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
+see http://lists.denx.de/mailman/listinfo/u-boot
+
 When you send a patch, please include the following information with
 it:
 
@@ -4084,7 +4094,7 @@ Notes:
   disabled must not need more memory than the old code without your
   modification.
 
-* Remember that there is a size limit of 40 kB per message on the
-  u-boot-users mailing list. Bigger patches will be moderated. If
-  they are reasonable and not bigger than 100 kB, they will be
-  acknowledged. Even bigger patches should be avoided.
+* Remember that there is a size limit of 100 kB per message on the
+  u-boot mailing list. Bigger patches will be moderated. If they are
+  reasonable and not too big, they will be acknowledged. But patches
+  bigger than the size limit should be avoided.

board/bf533-ezkit/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf533-ezkit/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -23,3 +25,9 @@
 
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-ezkit/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,20 +66,20 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
-		lib_generic/zlib.o		(.text)
-		board/bf533-ezkit/bf533-ezkit.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
+		lib_generic/zlib.o		(.text .text.*)
+		board/bf533-ezkit/bf533-ezkit.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bf533-stamp/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf533-stamp/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -23,3 +25,9 @@
 
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf533-stamp/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,18 +66,18 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bf537-stamp/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf537-stamp/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -24,6 +26,9 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
 # Set some default LDR flags based on boot mode.
-LDR_FLAGS-BFIN_BOOT_UART       := --port g --gpio 6
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
+LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf537-stamp/nand.c

@@ -87,7 +87,7 @@ int bfin_device_ready(struct mtd_info *mtd)
  * Members with a "?" were not set in the merged testing-NAND branch,
  * so they are not set here either.
  */
-void board_nand_init(struct nand_chip *nand)
+int board_nand_init(struct nand_chip *nand)
 {
 	*PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
 	*PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
@@ -97,5 +97,7 @@ void board_nand_init(struct nand_chip *nand)
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->dev_ready = bfin_device_ready;
 	nand->chip_delay = 30;
+
+	return 0;
 }
 #endif

board/bf537-stamp/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,18 +66,18 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/bf561-ezkit/Makefile

@@ -35,12 +35,11 @@ SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/bf561-ezkit/config.mk

@@ -1,4 +1,6 @@
 #
+# Copyright (c) 2005-2008 Analog Device Inc.
+#
 # (C) Copyright 2001
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
@@ -23,3 +25,9 @@
 
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
+
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
+# Set some default LDR flags based on boot mode.
+LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
+LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))

board/bf561-ezkit/u-boot.lds.S

@@ -28,6 +28,8 @@
 #include <config.h>
 #include <asm/blackfin.h>
 #undef ALIGN
+#undef ENTRY
+#undef bfin
 
 /* If we don't actually load anything into L1 data, this will avoid
  * a syntax error.  If we do actually load something into L1 data,
@@ -50,11 +52,12 @@ MEMORY
 	l1_data : ORIGIN = L1_DATA_B_SRAM,   LENGTH = L1_DATA_B_SRAM_SIZE
 }
 
+ENTRY(_start)
 SECTIONS
 {
 	.text :
 	{
-		cpu/blackfin/start.o (.text)
+		cpu/blackfin/start.o (.text .text.*)
 
 #ifdef ENV_IS_EMBEDDED
 		/* WARNING - the following is hand-optimized to fit within
@@ -63,20 +66,20 @@ SECTIONS
 		 * it linked after the configuration sector.
 		 */
 
-		cpu/blackfin/traps.o		(.text)
-		cpu/blackfin/interrupt.o	(.text)
-		cpu/blackfin/serial.o		(.text)
-		common/dlmalloc.o		(.text)
-		lib_generic/crc32.o		(.text)
-		lib_generic/zlib.o		(.text)
-		board/bf561-ezkit/bf561-ezkit.o		(.text)
+		cpu/blackfin/traps.o		(.text .text.*)
+		cpu/blackfin/interrupt.o	(.text .text.*)
+		cpu/blackfin/serial.o		(.text .text.*)
+		common/dlmalloc.o		(.text .text.*)
+		lib_generic/crc32.o		(.text .text.*)
+		lib_generic/zlib.o		(.text .text.*)
+		board/bf561-ezkit/bf561-ezkit.o		(.text .text.*)
 
 		. = DEFINED(env_offset) ? env_offset : .;
-		common/env_embedded.o	(.text)
+		common/env_embedded.o	(.text .text.*)
 #endif
 
 		__initcode_start = .;
-		cpu/blackfin/initcode.o (.text)
+		cpu/blackfin/initcode.o (.text .text.*)
 		__initcode_end = .;
 
 		*(.text .text.*)

board/freescale/mpc8540ads/mpc8540ads.c

@@ -133,7 +133,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8541cds/mpc8541cds.c

@@ -308,7 +308,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8544ds/mpc8544ds.c

@@ -121,7 +121,7 @@ pci_init_board(void)
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
 	struct pci_controller *hose = &pcie3_hose;
 	int pcie_ep = (host_agent == 1);
-	int pcie_configured  = io_sel >= 1;
+	int pcie_configured  = io_sel >= 6;
 	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -188,7 +188,7 @@ pci_init_board(void)
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
 	int pcie_ep = (host_agent == 5);
-	int pcie_configured  = io_sel & 6;
+	int pcie_configured  = io_sel >= 2;
 	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
@@ -251,7 +251,7 @@ pci_init_board(void)
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
 	struct pci_controller *hose = &pcie2_hose;
 	int pcie_ep = (host_agent == 3);
-	int pcie_configured  = io_sel & 4;
+	int pcie_configured  = io_sel >= 4;
 	struct pci_region *r = hose->regions;
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){

board/freescale/mpc8548cds/mpc8548cds.c

@@ -125,7 +125,7 @@ local_bus_init(void)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	gur->lbiuiplldcr1 = 0x00078080;

board/freescale/mpc8555cds/mpc8555cds.c

@@ -308,7 +308,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8560ads/mpc8560ads.c

@@ -337,7 +337,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/freescale/mpc8568mds/mpc8568mds.c

@@ -188,7 +188,7 @@ local_bus_init(void)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	gur->lbiuiplldcr1 = 0x00078080;

board/freescale/mpc8572ds/mpc8572ds.c

@@ -166,11 +166,11 @@ void pci_init_board(void)
 		struct pci_controller *hose = &pcie3_hose;
 		int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
 			(host_agent == 5) || (host_agent == 6);
-		int pcie_configured  = io_sel >= 1;
+		int pcie_configured  = (io_sel == 0x7);
 		struct pci_region *r = hose->regions;
 		u32 temp32;
 
-		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
 			printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
 					pcie_ep ? "End Point" : "Root Complex",
 					(uint)pci);
@@ -234,10 +234,10 @@ void pci_init_board(void)
 		struct pci_controller *hose = &pcie2_hose;
 		int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
 			(host_agent == 6) || (host_agent == 0);
-		int pcie_configured  = io_sel & 4;
+		int pcie_configured  = (io_sel == 0x3) || (io_sel == 0x7);
 		struct pci_region *r = hose->regions;
 
-		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
 			printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
 					pcie_ep ? "End Point" : "Root Complex",
 					(uint)pci);
@@ -287,7 +287,9 @@ void pci_init_board(void)
 		struct pci_controller *hose = &pcie1_hose;
 		int pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
 			(host_agent == 5);
-		int pcie_configured  = io_sel & 6;
+		int pcie_configured  = (io_sel == 0x2) || (io_sel == 0x3) ||
+					(io_sel == 0x7) || (io_sel == 0xb) ||
+					(io_sel == 0xc) || (io_sel == 0xf);
 		struct pci_region *r = hose->regions;
 
 		if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){

board/freescale/mpc8572ds/tlb.c

@@ -41,10 +41,6 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 0, BOOKE_PAGESZ_4K, 0),
 
-	SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
 	/* TLB 1 */
 	/* *I*** - Covers boot page */
 	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
@@ -86,6 +82,9 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_1M, 1),
 
+	SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 8, BOOKE_PAGESZ_4K, 1),
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/freescale/mpc8610hpcd/law.c

@@ -31,8 +31,8 @@ struct law_entry law_table[] = {
 #if !defined(CONFIG_SPD_EEPROM)
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
 #endif
-	SET_LAW(CONFIG_SYS_PCIE1_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE2_MEM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
 	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1),
 	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2),

board/freescale/mpc8610hpcd/mpc8610hpcd.c

@@ -266,14 +266,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE1_MEM_BASE,
+			 CONFIG_SYS_PCIE1_MEM_BUS,
 			 CONFIG_SYS_PCIE1_MEM_PHYS,
 			 CONFIG_SYS_PCIE1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE1_IO_BASE,
+			 CONFIG_SYS_PCIE1_IO_BUS,
 			 CONFIG_SYS_PCIE1_IO_PHYS,
 			 CONFIG_SYS_PCIE1_IO_SIZE,
 			 PCI_REGION_IO);
@@ -321,14 +321,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE2_MEM_BASE,
+			 CONFIG_SYS_PCIE2_MEM_BUS,
 			 CONFIG_SYS_PCIE2_MEM_PHYS,
 			 CONFIG_SYS_PCIE2_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCIE2_IO_BASE,
+			 CONFIG_SYS_PCIE2_IO_BUS,
 			 CONFIG_SYS_PCIE2_IO_PHYS,
 			 CONFIG_SYS_PCIE2_IO_SIZE,
 			 PCI_REGION_IO);
@@ -370,14 +370,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCI1_MEM_BASE,
+			 CONFIG_SYS_PCI1_MEM_BUS,
 			 CONFIG_SYS_PCI1_MEM_PHYS,
 			 CONFIG_SYS_PCI1_MEM_SIZE,
 			 PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			 CONFIG_SYS_PCI1_IO_BASE,
+			 CONFIG_SYS_PCI1_IO_BUS,
 			 CONFIG_SYS_PCI1_IO_PHYS,
 			 CONFIG_SYS_PCI1_IO_SIZE,
 			 PCI_REGION_IO);

board/m501sk/Makefile

@@ -27,8 +27,6 @@ LIB	= $(obj)lib$(BOARD).a
 
 COBJS  := m501sk.o eeprom.o
 
-SOBJS  := memsetup.o
-
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))

board/m501sk/memsetup.S

@@ -1,200 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *	          Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#ifdef CONFIG_BOOTBINFUNC
-/*
- * some parameters for the board
- *
- * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in
- * turn is based on the boot.bin code from ATMEL
- *
- */
-
-/* flash */
-#define MC_PUIA 0xFFFFFF10
-#define MC_PUIA_VAL 0x00000000
-#define MC_PUP 0xFFFFFF50
-#define MC_PUP_VAL 0x00000000
-#define MC_PUER 0xFFFFFF54
-#define MC_PUER_VAL 0x00000000
-#define MC_ASR 0xFFFFFF04
-#define MC_ASR_VAL 0x00000000
-#define MC_AASR 0xFFFFFF08
-#define MC_AASR_VAL 0x00000000
-#define EBI_CFGR 0xFFFFFF64
-#define EBI_CFGR_VAL 0x00000000
-#define SMC_CSR0 0xFFFFFF70
-#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define PLLAR 0xFFFFFC28
-#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define PLLBR 0xFFFFFC2C
-#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR 0xFFFFFC30
-/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-#define MCKR_VAL	0x00000202
-
-/* sdram */
-#define PIOC_ASR 0xFFFFF870
-#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as Perip (D16/D31) */
-#define PIOC_BSR 0xFFFFF874
-#define PIOC_BSR_VAL 0x00000000
-#define PIOC_PDR 0xFFFFF804
-#define PIOC_PDR_VAL 0xFFFF0000
-#define EBI_CSA 0xFFFFFF60
-#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
-#define SDRC_CR 0xFFFFFF98
-#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */
-#define SDRAM 0x20000000 /* address of the SDRAM */
-#define SDRAM1 0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
-#define SDRC_MR 0xFFFFFF90
-#define SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1 0x00000004 /* refresh */
-#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define SDRC_TR 0xFFFFFF94
-#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-
-_TEXT_BASE:
-	.word   TEXT_BASE
-
-.globl lowlevelinit
-lowlevelinit:
-	/* memory control configuration */
-	/* this isn't very elegant, but  what the heck */
-	ldr     r0, =SMRDATA
-	ldr     r1, _TEXT_BASE
-	sub     r0, r0, r1
-	add     r2, r0, #80
-0:
-	/* the address */
-	ldr     r1, [r0], #4
-	/* the value */
-	ldr     r3, [r0], #4
-	str     r3, [r1]
-	cmp     r2, r0
-	bne     0b
-	/* delay - this is all done by guess */
-	ldr     r0, =0x00010000
-1:
-	subs    r0, r0, #1
-	bhi     1b
-	ldr     r0, =SMRDATA1
-	ldr     r1, _TEXT_BASE
-	sub     r0, r0, r1
-	add     r2, r0, #176
-2:
-	/* the address */
-	ldr     r1, [r0], #4
-	/* the value */
-	ldr     r3, [r0], #4
-	str     r3, [r1]
-	cmp     r2, r0
-	bne     2b
-
-	/* everything is fine now */
-	mov     pc, lr
-
-	.ltorg
-
-SMRDATA:
-	.word MC_PUIA
-	.word MC_PUIA_VAL
-	.word MC_PUP
-	.word MC_PUP_VAL
-	.word MC_PUER
-	.word MC_PUER_VAL
-	.word MC_ASR
-	.word MC_ASR_VAL
-	.word MC_AASR
-	.word MC_AASR_VAL
-	.word EBI_CFGR
-	.word EBI_CFGR_VAL
-	.word SMC_CSR0
-	.word SMC_CSR0_VAL
-	.word PLLAR
-	.word PLLAR_VAL
-	.word PLLBR
-	.word PLLBR_VAL
-	.word MCKR
-	.word MCKR_VAL
-	/* SMRDATA is 80 bytes long */
-	/* here there's a delay of 100 */
-SMRDATA1:
-	.word PIOC_ASR
-	.word PIOC_ASR_VAL
-	.word PIOC_BSR
-	.word PIOC_BSR_VAL
-	.word PIOC_PDR
-	.word PIOC_PDR_VAL
-	.word EBI_CSA
-	.word EBI_CSA_VAL
-	.word SDRC_CR
-	.word SDRC_CR_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL1
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL2
-	.word SDRAM1
-	.word SDRAM_VAL
-	.word SDRC_TR
-	.word SDRC_TR_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL3
-	.word SDRAM
-	.word SDRAM_VAL
-	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_BOOTBINFUNC */

board/mpc8540eval/mpc8540eval.c

@@ -101,7 +101,7 @@ phys_size_t initdram (int board_type)
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
 	get_sys_info(&sysinfo);
 	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
-	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
+	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) {
 		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
 	} else {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff;

board/pm854/pm854.c

@@ -150,7 +150,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/pm856/pm856.c

@@ -306,7 +306,7 @@ local_bus_init(void)
 	 */
 
 	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {

board/sbc8548/sbc8548.c

@@ -126,7 +126,7 @@ local_bus_init(void)
 	sys_info_t sysinfo;
 
 	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
 	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	gur->lbiuiplldcr1 = 0x00078080;

board/sbc8641d/law.c

@@ -45,14 +45,14 @@
 
 struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW(CONFIG_SYS_PCI1_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCI1_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
-	SET_LAW(CONFIG_SYS_PCI2_IO_BASE, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2),
 	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-	SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
+	SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO)
 };
 
 int num_law_entries = ARRAY_SIZE(law_table);

board/sbc8641d/sbc8641d.c

@@ -247,14 +247,14 @@ void pci_init_board(void)
 
 		/* outbound memory */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_MEM_BASE,
+			       CONFIG_SYS_PCI1_MEM_BUS,
 			       CONFIG_SYS_PCI1_MEM_PHYS,
 			       CONFIG_SYS_PCI1_MEM_SIZE,
 			       PCI_REGION_MEM);
 
 		/* outbound io */
 		pci_set_region(r++,
-			       CONFIG_SYS_PCI1_IO_BASE,
+			       CONFIG_SYS_PCI1_IO_BUS,
 			       CONFIG_SYS_PCI1_IO_PHYS,
 			       CONFIG_SYS_PCI1_IO_SIZE,
 			       PCI_REGION_IO);
@@ -290,14 +290,14 @@ void pci_init_board(void)
 
 	/* outbound memory */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_MEM_BASE,
+		       CONFIG_SYS_PCI2_MEM_BUS,
 		       CONFIG_SYS_PCI2_MEM_PHYS,
 		       CONFIG_SYS_PCI2_MEM_SIZE,
 		       PCI_REGION_MEM);
 
 	/* outbound io */
 	pci_set_region(r++,
-		       CONFIG_SYS_PCI2_IO_BASE,
+		       CONFIG_SYS_PCI2_IO_BUS,
 		       CONFIG_SYS_PCI2_IO_PHYS,
 		       CONFIG_SYS_PCI2_IO_SIZE,
 		       PCI_REGION_IO);

board/socrates/socrates.c

@@ -156,7 +156,7 @@ void local_bus_init (void)
 	uint lcrr = CONFIG_SYS_LBC_LCRR;
 
 	get_sys_info (&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
+	clkdiv = lbc->lcrr & LCRR_CLKDIV;
 	lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
 
 	/* Disable PLL bypass for Local Bus Clock >= 66 MHz */

board/tqc/tqm85xx/tqm85xx.c

@@ -361,7 +361,7 @@ uint get_lbc_clock (void)
 {
 	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
 	sys_info_t sys_info;
-	ulong clkdiv = lbc->lcrr & 0x0f;
+	ulong clkdiv = lbc->lcrr & LCRR_CLKDIV;
 
 	get_sys_info (&sys_info);
 

board/xes/common/Makefile

@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB	= $(obj)lib$(VENDOR).a
+
+COBJS-$(CONFIG_FSL_PCI_INIT)	+= fsl_85xx_pci.o
+COBJS-$(CONFIG_MPC8572)		+= fsl_8572_clk.o
+COBJS-$(CONFIG_MPC85xx)		+= fsl_85xx_ddr.o
+COBJS-$(CONFIG_NAND_ACTL)	+= actl_nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/xes/common/actl_nand.c

@@ -0,0 +1,65 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * This driver support NAND devices which have address lines
+ * connected as ALE and CLE inputs.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		IO_ADDR_W = (ulong)this->IO_ADDR_W;
+
+		IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE |
+				CONFIG_SYS_NAND_ACTL_ALE |
+				CONFIG_SYS_NAND_ACTL_NCE);
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE;
+		if (ctrl & NAND_NCE)
+			IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE;
+
+		this->IO_ADDR_W = (void *)IO_ADDR_W;
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->IO_ADDR_W);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->cmd_ctrl = nand_addr_hwcontrol;
+	nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY;
+
+	return 0;
+}

board/xes/common/fsl_8572_clk.c

@@ -0,0 +1,51 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * Return SYSCLK input frequency - 50 MHz or 66 MHz depending on POR config
+ */
+unsigned long get_board_sys_clk(ulong dummy)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 gpporcr = gur->gpporcr;
+
+	if (gpporcr & 0x10000)
+		return 66666666;
+	else
+		return 50000000;
+}
+
+/*
+ * Return DDR input clock - synchronous with SYSCLK or 66 MHz
+ */
+unsigned long get_board_ddr_clk(ulong dummy)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+
+	if (ddr_ratio == 0x7)
+		return get_board_sys_clk(dummy);
+
+	return 66666666;
+}

board/xes/common/fsl_85xx_ddr.c

@@ -0,0 +1,93 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+
+	dram_size *= 0x100000;
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/* Initialize and enable DDR ECC */
+	ddr_enable_ecc(dram_size);
+#endif
+
+	return dram_size;
+}
+
+#if defined(CONFIG_DDR_ECC) || (CONFIG_NUM_DDR_CONTROLLERS > 1)
+void board_add_ram_info(int use_default)
+{
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	volatile ccsr_ddr_t *ddr1 = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+#endif
+
+	puts(" (");
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
+	/* Print interleaving information */
+	if (ddr1->cs0_config & 0x20000000) {
+		switch ((ddr1->cs0_config >> 24) & 0xf) {
+		case 0:
+			puts("cache line");
+			break;
+		case 1:
+			puts("page");
+			break;
+		case 2:
+			puts("bank");
+			break;
+		case 3:
+			puts("super-bank");
+			break;
+		default:
+			puts("invalid");
+			break;
+		}
+	} else {
+		puts("no");
+	}
+
+	puts(" interleaving");
+#endif
+
+#if (CONFIG_NUM_DDR_CONTROLLERS > 1) && defined(CONFIG_DDR_ECC)
+	puts(", ");
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+	puts("ECC enabled");
+#endif
+
+	puts(")");
+}
+#endif /* CONFIG_DDR_ECC || CONFIG_NUM_DDR_CONTROLLERS > 1 */

board/xes/common/fsl_85xx_pci.c

@@ -0,0 +1,379 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_config_unlock(struct pci_controller *hose);
+extern void fsl_pci_init(struct pci_controller *hose);
+
+int first_free_busno = 0;
+
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+#ifdef CONFIG_MPC8572
+/* Correlate host/agent POR bits to usable info. Table 4-14 */
+struct host_agent_cfg_t {
+	uchar pcie_root[3];
+	uchar rio_host;
+} host_agent_cfg[8] = {
+	{{0, 0, 0}, 0},
+	{{0, 1, 1}, 1},
+	{{1, 0, 1}, 0},
+	{{1, 1, 0}, 1},
+	{{0, 0, 1}, 0},
+	{{0, 1, 0}, 1},
+	{{1, 0, 0}, 0},
+	{{1, 1, 1}, 1}
+};
+
+/* Correlate port width POR bits to usable info. Table 4-15 */
+struct io_port_cfg_t {
+	uchar pcie_width[3];
+	uchar rio_width;
+} io_port_cfg[16] = {
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{4, 0, 0}, 0},
+	{{4, 4, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 4},
+	{{4, 2, 2}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{0, 0, 0}, 0},
+	{{4, 0, 0}, 4},
+	{{4, 0, 0}, 4},
+	{{0, 0, 0}, 4},
+	{{0, 0, 0}, 4},
+	{{8, 0, 0}, 0},
+};
+#elif defined CONFIG_MPC8548
+/* Correlate host/agent POR bits to usable info. Table 4-12 */
+struct host_agent_cfg_t {
+	uchar pci_host[2];
+	uchar pcie_root[1];
+	uchar rio_host;
+} host_agent_cfg[8] = {
+	{{1, 1}, {0}, 0},
+	{{1, 1}, {1}, 0},
+	{{1, 1}, {0}, 1},
+	{{0, 0}, {0}, 0}, /* reserved */
+	{{0, 1}, {1}, 0},
+	{{1, 1}, {1}, 0},
+	{{0, 1}, {1}, 1},
+	{{1, 1}, {1}, 1}
+};
+
+/* Correlate port width POR bits to usable info. Table 4-13 */
+struct io_port_cfg_t {
+	uchar pcie_width[1];
+	uchar rio_width;
+} io_port_cfg[8] = {
+	{{0}, 0},
+	{{0}, 0},
+	{{0}, 0},
+	{{4}, 4},
+	{{4}, 4},
+	{{0}, 4},
+	{{0}, 4},
+	{{8}, 0},
+};
+#endif
+
+void pci_init_board(void)
+{
+	struct pci_controller *hose;
+	volatile ccsr_fsl_pci_t *pci;
+	int width;
+	int host;
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+	struct pci_region *r;
+
+#ifdef CONFIG_PCI1
+	uint pci_spd_norm = (gur->pordevsr & MPC85xx_PORDEVSR_PCI1_SPD);
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+	uint pcix = gur->pordevsr & MPC85xx_PORDEVSR_PCI1;
+	uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
+
+	width = 0; /* Silence compiler warning... */
+	io_sel &= 0xf; /* Silence compiler warning... */
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
+	hose = &pci1_hose;
+	host = host_agent_cfg[host_agent].pci_host[0];
+	r = hose->regions;
+
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf("\n    PCI1: %d bit %s, %s %d MHz, %s, %s\n",
+			pci_32 ? 32 : 64,
+			pcix ? "PCIX" : "PCI",
+			pci_spd_norm ?  ">=" : "<=",
+			pcix ? freq * 2 : freq,
+			host ? "host" : "agent",
+			pci_arb ? "arbiter" : "external-arbiter");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_MEM_BASE,
+				CONFIG_SYS_PCI1_MEM_PHYS,
+				CONFIG_SYS_PCI1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCI1_IO_BASE,
+				CONFIG_SYS_PCI1_IO_PHYS,
+				CONFIG_SYS_PCI1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+				   (int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCI1 on bus %02x - %02x\n",
+			hose->first_busno, hose->last_busno);
+	} else {
+		printf("    PCI1: disabled\n");
+	}
+#elif defined CONFIG_MPC8548
+	/* PCI1 not present on MPC8572 */
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+#ifdef CONFIG_PCIE1
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
+	hose = &pcie1_hose;
+	host = host_agent_cfg[host_agent].pcie_root[0];
+	width = io_port_cfg[io_sel].pcie_width[0];
+	r = hose->regions;
+
+	if (width && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
+		printf("\n    PCIE1 connected as %s (x%d)",
+			host ? "Root Complex" : "End Point", width);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_MEM_BASE,
+				CONFIG_SYS_PCIE1_MEM_PHYS,
+				CONFIG_SYS_PCIE1_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE1_IO_BASE,
+				CONFIG_SYS_PCIE1_IO_PHYS,
+				CONFIG_SYS_PCIE1_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+					(int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCIE1 on bus %02x - %02x\n",
+				hose->first_busno, hose->last_busno);
+	}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif /* CONFIG_PCIE1 */
+
+#ifdef CONFIG_PCIE2
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
+	hose = &pcie2_hose;
+	host = host_agent_cfg[host_agent].pcie_root[1];
+	width = io_port_cfg[io_sel].pcie_width[1];
+	r = hose->regions;
+
+	if (width && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
+		printf("\n    PCIE2 connected as %s (x%d)",
+			host ? "Root Complex" : "End Point", width);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE2_MEM_BASE,
+				CONFIG_SYS_PCIE2_MEM_PHYS,
+				CONFIG_SYS_PCIE2_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE2_IO_BASE,
+				CONFIG_SYS_PCIE2_IO_PHYS,
+				CONFIG_SYS_PCIE2_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+					(int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCIE2 on bus %02x - %02x\n",
+				hose->first_busno, hose->last_busno);
+	}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+#endif /* CONFIG_PCIE2 */
+
+#ifdef CONFIG_PCIE3
+	pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
+	hose = &pcie3_hose;
+	host = host_agent_cfg[host_agent].pcie_root[2];
+	width = io_port_cfg[io_sel].pcie_width[2];
+	r = hose->regions;
+
+	if (width && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
+		printf("\n    PCIE3 connected as %s (x%d)",
+			host ? "Root Complex" : "End Point", width);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug(" with errors.  Clearing.  Now 0x%08x",
+				pci->pme_msg_det);
+		}
+		printf("\n");
+
+		/* inbound */
+		r += fsl_pci_setup_inbound_windows(r);
+
+		/* outbound memory */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE3_MEM_BASE,
+				CONFIG_SYS_PCIE3_MEM_PHYS,
+				CONFIG_SYS_PCIE3_MEM_SIZE,
+				PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(r++,
+				CONFIG_SYS_PCIE3_IO_BASE,
+				CONFIG_SYS_PCIE3_IO_PHYS,
+				CONFIG_SYS_PCIE3_IO_SIZE,
+				PCI_REGION_IO);
+
+		hose->region_count = r - hose->regions;
+
+		hose->first_busno = first_free_busno;
+		pci_setup_indirect(hose, (int)&pci->cfg_addr,
+					(int)&pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		/* Unlock inbound PCI configuration cycles */
+		if (!host)
+			fsl_pci_config_unlock(hose);
+
+		first_free_busno = hose->last_busno + 1;
+		printf("    PCIE3 on bus %02x - %02x\n",
+				hose->first_busno, hose->last_busno);
+	}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+#endif /* CONFIG_PCIE3 */
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+				struct pci_controller *hose);
+
+void ft_board_pci_setup(void *blob, bd_t *bd)
+{
+	/* TODO - make node name (eg pci0) dynamic */
+#ifdef CONFIG_PCI1
+	ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
+#endif
+#ifdef CONFIG_PCIE1
+	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
+#endif
+#ifdef CONFIG_PCIE2
+	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#endif
+#ifdef CONFIG_PCIE3
+	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */

board/xes/xpedite5200/Makefile

@@ -0,0 +1,55 @@
+#
+# Copyright 2008 Extreme Engineering Solutions, Inc.
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/xes/xpedite5200/config.mk

@@ -0,0 +1,34 @@
+#
+# Copyright 2008 Extreme Engineering Solutions, Inc.
+# Copyright 2004, 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# xpedite5200 board
+#
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
+PLATFORM_CPPFLAGS += -mrelocatable

board/xes/xpedite5200/ddr.c

@@ -0,0 +1,91 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void
+get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+	i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
+
+	/* We use soldered memory, but use an SPD EEPROM to describe it.
+	 * The SPD has an unspecified dimm type, but the DDR2 initialization
+	 * code requires a specific type to be specified. This sets the type
+	 * as a standard unregistered SO-DIMM. */
+	if (spd->dimm_type == 0) {
+		spd->dimm_type = 0x4;
+		((uchar *)spd)[63] += 0x4;
+	}
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+	return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
+			unsigned int ctrl_num)
+{
+	unsigned int i;
+
+	if (ctrl_num) {
+		printf("%s: invalid ctrl_num = %d\n", __func__, ctrl_num);
+		return;
+	}
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++)
+		get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS);
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	/*
+	 * Factors to consider for clock adjust:
+	 *	- number of chips on bus
+	 *	- position of slot
+	 *	- DDR1 vs. DDR2?
+	 *	- ???
+	 *
+	 * This needs to be determined on a board-by-board basis.
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	popts->clk_adjust = 7;
+
+	/*
+	 * Factors to consider for CPO:
+	 *	- frequency
+	 *	- ddr1 vs. ddr2
+	 */
+	popts->cpo_override = 9;
+
+	/*
+	 * Factors to consider for write data delay:
+	 *	- number of DIMMs
+	 *
+	 * 1 = 1/4 clock delay
+	 * 2 = 1/2 clock delay
+	 * 3 = 3/4 clock delay
+	 * 4 = 1   clock delay
+	 * 5 = 5/4 clock delay
+	 * 6 = 3/2 clock delay
+	 */
+	popts->write_data_delay = 3;
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+}

board/xes/xpedite5200/law.c

@@ -0,0 +1,51 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+	SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#if CONFIG_SYS_PCI1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCI_1),
+	SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAWAR_SIZE_8M, LAW_TRGT_IF_PCI_1),
+#endif
+#if CONFIG_SYS_PCI2_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2),
+	SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_2),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);

board/xes/xpedite5200/tlb.c

@@ -0,0 +1,85 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* W**G* - NOR flashes */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+		0, 0, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 1, BOOKE_PAGESZ_1M, 1),
+
+	/* *I*G* - NAND flash */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 2, BOOKE_PAGESZ_1M, 1),
+
+#if CONFIG_PCI1
+	/* *I*G* - PCI MEM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 3, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#if CONFIG_PCI2
+	/* *I*G* - PCI MEM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 4, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
+	/* *I*G* - PCI IO */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 5, BOOKE_PAGESZ_16M, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/xes/xpedite5200/u-boot.lds

@@ -0,0 +1,145 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2004, 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    *(.text)
+    *(.got1)
+   } :text
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  } :text
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  } :bss
+
+  . = ALIGN(4);
+  _end = . ;
+  PROVIDE (end = .);
+}

board/xes/xpedite5200/xpedite5200.c

@@ -0,0 +1,125 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2004, 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pca953x.h>
+
+extern void ft_board_pci_setup(void *blob, bd_t *bd);
+
+int checkboard(void)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+
+	char *s;
+
+	printf("Board: X-ES %s PMC\n", CONFIG_SYS_BOARD_NAME);
+	printf("       ");
+	s = getenv("board_rev");
+	if (s)
+		printf("Rev %s, ", s);
+	s = getenv("serial#");
+	if (s)
+		printf("Serial# %s, ", s);
+	s = getenv("board_cfg");
+	if (s)
+		printf("Cfg %s", s);
+	printf("\n");
+
+	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
+	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
+	ecm->eedr = 0xffffffff;		/* Clear ecm errors */
+	ecm->eeer = 0xffffffff;		/* Enable ecm errors */
+
+	return 0;
+}
+
+static void flash_cs_fixup(void)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	int flash_sel;
+
+	/*
+	 * Print boot dev and swap flash flash chip selects if booted from 2nd
+	 * flash.  Swapping chip selects presents user with a common memory
+	 * map regardless of which flash was booted from.
+	 */
+	flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+			CONFIG_SYS_PCA953X_FLASH_PASS_CS));
+	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
+
+	if (flash_sel) {
+		lbc->br0 = CONFIG_SYS_BR1_PRELIM;
+		lbc->or0 = CONFIG_SYS_OR1_PRELIM;
+
+		lbc->br1 = CONFIG_SYS_BR0_PRELIM;
+		lbc->or1 = CONFIG_SYS_OR0_PRELIM;
+	}
+}
+
+int board_early_init_r(void)
+{
+	/* Initialize PCA9557 devices */
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
+
+	/*
+	 * Remap NOR flash region to caching-inhibited
+	 * so that flash can be erased/programmed properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* Invalidate existing TLB entry for NOR flash */
+	disable_tlb(0);
+	set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+		(CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 0, BOOKE_PAGESZ_256M, 1);
+
+	flash_cs_fixup();
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_PCI
+	ft_board_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
+}
+#endif

board/xes/xpedite5370/Makefile

@@ -0,0 +1,45 @@
+#
+# Copyright 2008 Extreme Engineering Solutions, Inc.
+# Copyright 2007 Freescale Semiconductor, Inc.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/xes/xpedite5370/config.mk

@@ -0,0 +1,35 @@
+#
+# Copyright 2008 Extreme Engineering Solutions, Inc.
+# Copyright 2007-2008 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# xpedite5370 board
+#
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
+
+PLATFORM_RELFLAGS += -mrelocatable
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8572=1

board/xes/xpedite5370/ddr.c

@@ -0,0 +1,270 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
+{
+	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
+		 sizeof(ddr2_spd_eeprom_t));
+}
+
+unsigned int fsl_ddr_get_mem_data_rate(void)
+{
+	return get_ddr_freq(0);
+}
+
+void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+	unsigned int i;
+	unsigned int i2c_address = 0;
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+		if (ctrl_num == 0)
+			i2c_address = SPD_EEPROM_ADDRESS1;
+		if (ctrl_num == 1)
+			i2c_address = SPD_EEPROM_ADDRESS2;
+		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+	}
+}
+
+/*
+ * There are four board-specific SDRAM timing parameters which must be
+ * calculated based on the particular PCB artwork.  These are:
+ *   1.) CPO (Read Capture Delay)
+ *           - TIMING_CFG_2 register
+ *           Source: Calculation based on board trace lengths and
+ *                   chip-specific internal delays.
+ *   2.) WR_DATA_DELAY (Write Command to Data Strobe Delay)
+ *           - TIMING_CFG_2 register
+ *           Source: Calculation based on board trace lengths.
+ *                   Unless clock and DQ lanes are very different
+ *                   lengths (>2"), this should be set to the nominal value
+ *                   of 1/2 clock delay.
+ *   3.) CLK_ADJUST (Clock and Addr/Cmd alignment control)
+ *           - DDR_SDRAM_CLK_CNTL register
+ *           Source: Signal Integrity Simulations
+ *   4.) 2T Timing on Addr/Ctl
+ *           - TIMING_CFG_2 register
+ *           Source: Signal Integrity Simulations
+ *           Usually only needed with heavy load/very high speed (>DDR2-800)
+ *
+ *     ====== XPedite5370 DDR2-600 read delay calculations ======
+ *
+ *     See Freescale's App Note AN2583 as refrence.  This document also
+ *     contains the chip-specific delays for 8548E, 8572, etc.
+ *
+ *     For MPC8572E
+ *     Minimum chip delay (Ch 0): 1.372ns
+ *     Maximum chip delay (Ch 0): 2.914ns
+ *     Minimum chip delay (Ch 1): 1.220ns
+ *     Maximum chip delay (Ch 1): 2.595ns
+ *
+ *     CLK adjust = 5 (from simulations) = 5/8* 3.33ns = 2080ps
+ *
+ *     Minimum delay calc (Ch 0):
+ *     clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly
+ *     2.3" * 180 - 400ps     + 1.9" * 180         + 2080ps     + 1372ps
+ *                                                 = 3808ps
+ *                                                 = 3.808ns
+ *
+ *     Maximum delay calc (Ch 0):
+ *     clock prop + dram skew + max dqs prop delay + clk_adjust + max chip dly
+ *     2.3" * 180 + 400ps     + 2.4" * 180         + 2080ps     + 2914ps
+ *                                                 = 6240ps
+ *                                                 = 6.240ns
+ *
+ *     Minimum delay calc (Ch 1):
+ *     clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly
+ *     1.46" * 180- 400ps     + 0.7" * 180         + 2080ps     + 1220ps
+ *                                                 = 3288ps
+ *                                                 = 3.288ns
+ *
+ *     Maximum delay calc (Ch 1):
+ *     clock prop + dram skew + max dqs prop delay + clk_adjust + min chip dly
+ *     1.46" * 180+ 400ps     + 1.1" * 180         + 2080ps     + 2595ps
+ *                                                 = 5536ps
+ *                                                 = 5.536ns
+ *
+ *     Ch.0: 3.808ns to 6.240ns additional delay needed  (pick 5ns as target)
+ *              This is 1.5 clock cycles, pick CPO = READ_LAT + 3/2 (0x8)
+ *     Ch.1: 3.288ns to 5.536ns additional delay needed  (pick 4.4ns as target)
+ *              This is 1.32 clock cycles, pick CPO = READ_LAT + 5/4 (0x7)
+ *
+ *
+ *     ====== XPedite5370 DDR2-800 read delay calculations ======
+ *
+ *     See Freescale's App Note AN2583 as refrence.  This document also
+ *     contains the chip-specific delays for 8548E, 8572, etc.
+ *
+ *     For MPC8572E
+ *     Minimum chip delay (Ch 0): 1.372ns
+ *     Maximum chip delay (Ch 0): 2.914ns
+ *     Minimum chip delay (Ch 1): 1.220ns
+ *     Maximum chip delay (Ch 1): 2.595ns
+ *
+ *     CLK adjust = 5 (from simulations) = 5/8* 2.5ns = 1563ps
+ *
+ *     Minimum delay calc (Ch 0):
+ *     clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly
+ *     2.3" * 180 - 350ps     + 1.9" * 180         + 1563ps     + 1372ps
+ *                                                 = 3341ps
+ *                                                 = 3.341ns
+ *
+ *     Maximum delay calc (Ch 0):
+ *     clock prop + dram skew + max dqs prop delay + clk_adjust + max chip dly
+ *     2.3" * 180 + 350ps     + 2.4" * 180         + 1563ps     + 2914ps
+ *                                                 = 5673ps
+ *                                                 = 5.673ns
+ *
+ *     Minimum delay calc (Ch 1):
+ *     clock prop - dram skew + min dqs prop delay + clk_adjust + min chip dly
+ *     1.46" * 180- 350ps     + 0.7" * 180         + 1563ps     + 1220ps
+ *                                                 = 2822ps
+ *                                                 = 2.822ns
+ *
+ *     Maximum delay calc (Ch 1):
+ *     clock prop + dram skew + max dqs prop delay + clk_adjust + min chip dly
+ *     1.46" * 180+ 350ps     + 1.1" * 180         + 1563ps     + 2595ps
+ *                                                 = 4968ps
+ *                                                 = 4.968ns
+ *
+ *     Ch.0: 3.341ns to 5.673ns additional delay needed  (pick 4.5ns as target)
+ *              This is 1.8 clock cycles, pick CPO = READ_LAT + 7/4 (0x9)
+ *     Ch.1: 2.822ns to 4.968ns additional delay needed  (pick 3.9ns as target)
+ *              This is 1.56 clock cycles, pick CPO = READ_LAT + 3/2 (0x8)
+ *
+ * Write latency (WR_DATA_DELAY) is calculated by doing the following:
+ *
+ *      The DDR SDRAM specification requires DQS be received no sooner than
+ *      75% of an SDRAM clock period—and no later than 125% of a clock
+ *      period—from the capturing clock edge of the command/address at the
+ *      SDRAM.
+ *
+ * Based on the above tracelengths, the following are calculated:
+ *      Ch. 0 8572 to DRAM propagation (DQ lanes) : 1.9" * 180 =  0.342ns
+ *      Ch. 0 8572 to DRAM propagation (CLKs) :     2.3" * 180 =  0.414ns
+ *      Ch. 1 8572 to DRAM propagation (DQ lanes) : 0.7" * 180 =  0.126ns
+ *      Ch. 1 8572 to DRAM propagation (CLKs   ) : 1.47" * 180 =  0.264ns
+ *
+ * Difference in arrival time CLK vs. DQS:
+ *      Ch. 0 0.072ns
+ *      Ch. 1 0.138ns
+ *
+ *      Both of these values are much less than 25% of the clock
+ *      period at DDR2-600 or DDR2-800, so no additional delay is needed over
+ *      the 1/2 cycle which normally aligns the first DQS transition
+ *      exactly WL (CAS latency minus one cycle) after the CAS strobe.
+ *      See Figure 9-53 in MPC8572E manual: "1/2 delay" in Freescale's
+ *      terminology corresponds to exactly one clock period delay after
+ *      the CAS strobe. (due to the fact that the "delay" is referenced
+ *      from the *falling* edge of the CLK, just after the rising edge
+ *      which the CAS strobe is latched on.
+ */
+
+typedef struct board_memctl_options {
+	uint16_t datarate_mhz_low;
+	uint16_t datarate_mhz_high;
+	uint8_t clk_adjust;
+	uint8_t cpo_override;
+	uint8_t write_data_delay;
+} board_memctl_options_t;
+
+static struct board_memctl_options bopts_ctrl[][2] = {
+	{
+		/* Controller 0 */
+		{
+			/* DDR2 600/667 */
+			.datarate_mhz_low	= 500,
+			.datarate_mhz_high	= 750,
+			.clk_adjust		= 5,
+			.cpo_override		= 8,
+			.write_data_delay	= 2,
+		},
+		{
+			/* DDR2 800 */
+			.datarate_mhz_low	= 750,
+			.datarate_mhz_high	= 850,
+			.clk_adjust		= 5,
+			.cpo_override		= 9,
+			.write_data_delay	= 2,
+		},
+	},
+	{
+		/* Controller 1 */
+		{
+			/* DDR2 600/667 */
+			.datarate_mhz_low	= 500,
+			.datarate_mhz_high	= 750,
+			.clk_adjust		= 5,
+			.cpo_override		= 7,
+			.write_data_delay	= 2,
+		},
+		{
+			/* DDR2 800 */
+			.datarate_mhz_low	= 750,
+			.datarate_mhz_high	= 850,
+			.clk_adjust		= 5,
+			.cpo_override		= 8,
+			.write_data_delay	= 2,
+		},
+	},
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+			   dimm_params_t *pdimm,
+			   unsigned int ctrl_num)
+{
+	struct board_memctl_options *bopts = bopts_ctrl[ctrl_num];
+	sys_info_t sysinfo;
+	int i;
+	unsigned int datarate;
+
+	get_sys_info(&sysinfo);
+	datarate = sysinfo.freqDDRBus / 1000 / 1000;
+
+	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
+		if ((bopts[i].datarate_mhz_low <= datarate) &&
+		    (bopts[i].datarate_mhz_high >= datarate)) {
+			debug("controller %d:\n", ctrl_num);
+			debug(" clk_adjust = %d\n", bopts[i].clk_adjust);
+			debug(" cpo = %d\n", bopts[i].cpo_override);
+			debug(" write_data_delay = %d\n",
+			      bopts[i].write_data_delay);
+			popts->clk_adjust = bopts[i].clk_adjust;
+			popts->cpo_override = bopts[i].cpo_override;
+			popts->write_data_delay = bopts[i].write_data_delay;
+		}
+	}
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+}

board/xes/xpedite5370/law.c

@@ -0,0 +1,54 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+	SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1),
+	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
+#endif
+#ifdef CONFIG_SYS_PCIE2_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
+	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2),
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_PHYS
+	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3),
+	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);

board/xes/xpedite5370/tlb.c

@@ -0,0 +1,94 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* W**G* - NOR flashes */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE2, CONFIG_SYS_FLASH_BASE2,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
+		0, 0, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 1, BOOKE_PAGESZ_1M, 1),
+
+	/* *I*G* - NAND flash */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 2, BOOKE_PAGESZ_1M, 1),
+
+#ifdef CONFIG_PCIE1
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_PHYS, CONFIG_SYS_PCIE1_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 3, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCIE2
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE2_MEM_PHYS, CONFIG_SYS_PCIE2_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 4, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#ifdef CONFIG_PCIE3
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_PHYS, CONFIG_SYS_PCIE3_MEM_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 5, BOOKE_PAGESZ_256M, 1),
+#endif
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3)
+	/* *I*G* - PCIe */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_PHYS, CONFIG_SYS_PCIE1_IO_PHYS,
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 6, BOOKE_PAGESZ_64M, 1),
+#endif
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);

board/xes/xpedite5370/u-boot.lds

@@ -0,0 +1,145 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    *(.text)
+    *(.got1)
+   } :text
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  } :text
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  } :bss
+
+  . = ALIGN(4);
+  _end = . ;
+  PROVIDE (end = .);
+}

board/xes/xpedite5370/xpedite5370.c

@@ -0,0 +1,128 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <pca953x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void ft_board_pci_setup(void *blob, bd_t *bd);
+
+int checkboard(void)
+{
+	char *s;
+
+	printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
+	printf("       ");
+	s = getenv("board_rev");
+	if (s)
+		printf("Rev %s, ", s);
+	s = getenv("serial#");
+	if (s)
+		printf("Serial# %s, ", s);
+	s = getenv("board_cfg");
+	if (s)
+		printf("Cfg %s", s);
+	printf("\n");
+
+	return 0;
+}
+
+static void flash_cs_fixup(void)
+{
+	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	int flash_sel;
+
+	/*
+	 * Print boot dev and swap flash flash chip selects if booted from 2nd
+	 * flash.  Swapping chip selects presents user with a common memory
+	 * map regardless of which flash was booted from.
+	 */
+	flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+			CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
+	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
+
+	if (flash_sel) {
+		lbc->br0 = CONFIG_SYS_BR1_PRELIM;
+		lbc->or0 = CONFIG_SYS_OR1_PRELIM;
+
+		lbc->br1 = CONFIG_SYS_BR0_PRELIM;
+		lbc->or1 = CONFIG_SYS_OR0_PRELIM;
+	}
+}
+
+int board_early_init_r(void)
+{
+	/* Initialize PCA9557 devices */
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
+
+	/*
+	 * Remap NOR flash region to caching-inhibited
+	 * so that flash can be erased/programmed properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* Invalidate existing TLB entry for NOR flash */
+	disable_tlb(0);
+	set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+		(CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
+		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		0, 0, BOOKE_PAGESZ_256M, 1);
+
+	flash_cs_fixup();
+
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_PCI
+	ft_board_pci_setup(blob, bd);
+#endif
+	ft_cpu_setup(blob, bd);
+}
+#endif
+
+#ifdef CONFIG_MP
+extern void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+	cpu_mp_lmb_reserve(lmb);
+}
+#endif

common/usb_kbd.c

@@ -211,7 +211,11 @@ int drv_usb_kbd_init(void)
 /* deregistering the keyboard */
 int usb_kbd_deregister(void)
 {
+#ifdef CONFIG_SYS_DEVICE_DEREGISTER
 	return device_deregister(DEVNAME);
+#else
+	return 1;
+#endif
 }
 
 /**************************************************************************

cpu/arm920t/at91rm9200/lowlevel_init.S

@@ -38,33 +38,7 @@
  * turn is based on the boot.bin code from ATMEL
  *
  */
-
-/* flash */
-#define MC_PUIA		0xFFFFFF10
-#define MC_PUP		0xFFFFFF50
-#define MC_PUER		0xFFFFFF54
-#define MC_ASR		0xFFFFFF04
-#define MC_AASR		0xFFFFFF08
-#define EBI_CFGR	0xFFFFFF64
-#define SMC_CSR0	0xFFFFFF70
-
-/* clocks */
-#define PLLAR		0xFFFFFC28
-#define PLLBR		0xFFFFFC2C
-#define MCKR		0xFFFFFC30
-
-#define AT91C_BASE_CKGR 0xFFFFFC20
-#define CKGR_MOR 0
-
-/* sdram */
-#define PIOC_ASR	0xFFFFF870
-#define PIOC_BSR	0xFFFFF874
-#define PIOC_PDR	0xFFFFF804
-#define EBI_CSA		0xFFFFFF60
-#define SDRC_CR		0xFFFFFF98
-#define SDRC_MR		0xFFFFFF90
-#define SDRC_TR		0xFFFFFF94
-
+#include <asm/arch/AT91RM9200.h>
 
 _MTEXT_BASE:
 #undef START_FROM_MEM
@@ -84,7 +58,7 @@ lowlevel_init:
 #else
 	ldr     r0, =0x0000FF00		/* Disable main oscillator, OSCOUNT = 0xFF */
 #endif
-	str     r0, [r1, #CKGR_MOR]
+	str     r0, [r1, #AT91C_CKGR_MOR]
 	/* Add loop to compensate Main Oscillator startup time */
 	ldr     r0, =0x00000010
 LoopOsc:
@@ -134,72 +108,72 @@ LoopOsc:
 	.ltorg
 
 SMRDATA:
-	.word MC_PUIA
-	.word MC_PUIA_VAL
-	.word MC_PUP
-	.word MC_PUP_VAL
-	.word MC_PUER
-	.word MC_PUER_VAL
-	.word MC_ASR
-	.word MC_ASR_VAL
-	.word MC_AASR
-	.word MC_AASR_VAL
-	.word EBI_CFGR
-	.word EBI_CFGR_VAL
-	.word SMC_CSR0
-	.word SMC_CSR0_VAL
-	.word PLLAR
-	.word PLLAR_VAL
-	.word PLLBR
-	.word PLLBR_VAL
-	.word MCKR
-	.word MCKR_VAL
+	.word AT91C_MC_PUIA
+	.word CONFIG_SYS_MC_PUIA_VAL
+	.word AT91C_MC_PUP
+	.word CONFIG_SYS_MC_PUP_VAL
+	.word AT91C_MC_PUER
+	.word CONFIG_SYS_MC_PUER_VAL
+	.word AT91C_MC_ASR
+	.word CONFIG_SYS_MC_ASR_VAL
+	.word AT91C_MC_AASR
+	.word CONFIG_SYS_MC_AASR_VAL
+	.word AT91C_EBI_CFGR
+	.word CONFIG_SYS_EBI_CFGR_VAL
+	.word AT91C_SMC_CSR0
+	.word CONFIG_SYS_SMC_CSR0_VAL
+	.word AT91C_PLLAR
+	.word CONFIG_SYS_PLLAR_VAL
+	.word AT91C_PLLBR
+	.word CONFIG_SYS_PLLBR_VAL
+	.word AT91C_MCKR
+	.word CONFIG_SYS_MCKR_VAL
 	/* SMRDATA is 80 bytes long */
 	/* here there's a delay of 100 */
 SMRDATA1:
-	.word PIOC_ASR
-	.word PIOC_ASR_VAL
-	.word PIOC_BSR
-	.word PIOC_BSR_VAL
-	.word PIOC_PDR
-	.word PIOC_PDR_VAL
-	.word EBI_CSA
-	.word EBI_CSA_VAL
-	.word SDRC_CR
-	.word SDRC_CR_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL1
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL2
-	.word SDRAM1
-	.word SDRAM_VAL
-	.word SDRC_TR
-	.word SDRC_TR_VAL
-	.word SDRAM
-	.word SDRAM_VAL
-	.word SDRC_MR
-	.word SDRC_MR_VAL3
-	.word SDRAM
-	.word SDRAM_VAL
+	.word AT91C_PIOC_ASR
+	.word CONFIG_SYS_PIOC_ASR_VAL
+	.word AT91C_PIOC_BSR
+	.word CONFIG_SYS_PIOC_BSR_VAL
+	.word AT91C_PIOC_PDR
+	.word CONFIG_SYS_PIOC_PDR_VAL
+	.word AT91C_EBI_CSA
+	.word CONFIG_SYS_EBI_CSA_VAL
+	.word AT91C_SDRC_CR
+	.word CONFIG_SYS_SDRC_CR_VAL
+	.word AT91C_SDRC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91C_SDRC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL1
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91C_SDRC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL2
+	.word CONFIG_SYS_SDRAM1
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91C_SDRC_TR
+	.word CONFIG_SYS_SDRC_TR_VAL
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
+	.word AT91C_SDRC_MR
+	.word CONFIG_SYS_SDRC_MR_VAL3
+	.word CONFIG_SYS_SDRAM
+	.word CONFIG_SYS_SDRAM_VAL
 	/* SMRDATA1 is 176 bytes long */
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

cpu/mpc824x/Makefile

@@ -44,7 +44,7 @@ $(LIB):	$(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 
 $(obj)bedbug_603e.c:
-	ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
+	ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
 
 #########################################################################
 

cpu/mpc85xx/cpu.c

@@ -77,8 +77,6 @@ struct cpu_type *identify_cpu(u32 ver)
 int checkcpu (void)
 {
 	sys_info_t sysinfo;
-	uint lcrr;		/* local bus clock ratio register */
-	uint clkdiv;		/* clock divider portion of lcrr */
 	uint pvr, svr;
 	uint fam;
 	uint ver;
@@ -165,30 +163,11 @@ int checkcpu (void)
 		break;
 	}
 
-#if defined(CONFIG_SYS_LBC_LCRR)
-	lcrr = CONFIG_SYS_LBC_LCRR;
-#else
-	{
-	    volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
-	    lcrr = lbc->lcrr;
-	}
-#endif
-	clkdiv = lcrr & 0x0f;
-	if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-#if defined(CONFIG_MPC8548) || defined(CONFIG_MPC8544) || \
-    defined(CONFIG_MPC8572) || defined(CONFIG_MPC8536)
-		/*
-		 * Yes, the entire PQ38 family use the same
-		 * bit-representation for twice the clock divider values.
-		 */
-		 clkdiv *= 2;
-#endif
-		printf("LBC:%-4s MHz\n",
-		       strmhz(buf1, sysinfo.freqSystemBus / clkdiv));
-	} else {
-		printf("LBC: unknown (lcrr: 0x%08x)\n", lcrr);
-	}
+	if (sysinfo.freqLocalBus > LCRR_CLKDIV)
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	else
+		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+		       sysinfo.freqLocalBus);
 
 #ifdef CONFIG_CPM2
 	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));

cpu/mpc85xx/fdt.c

@@ -28,11 +28,12 @@
 #include <fdt_support.h>
 #include <asm/processor.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern void ft_qe_setup(void *blob);
 
 #ifdef CONFIG_MP
 #include "mp.h"
-DECLARE_GLOBAL_DATA_PTR;
 
 void ft_fixup_cpu(void *blob, u64 memory_limit)
 {
@@ -231,6 +232,11 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		"clock-frequency", bd->bi_intfreq, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
+
+	do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
+		"bus-frequency", gd->lbc_clk, 1);
+	do_fixup_by_compat_u32(blob, "fsl,elbc",
+		"bus-frequency", gd->lbc_clk, 1);
 #ifdef CONFIG_QE
 	ft_qe_setup(blob);
 #endif

cpu/mpc85xx/release.S

@@ -157,6 +157,7 @@ __secondary_start_page:
 	mfspr	r0,SPRN_PIR
 	stw	r0,ENTRY_PIR(r10)
 
+	mtspr	IVPR,r12
 /*
  * Coming here, we know the cpu has one TLB mapping in TLB1[0]
  * which maps 0xfffff000-0xffffffff one-to-one.  We set up a

cpu/mpc85xx/speed.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <ppc_asm.tmpl>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -37,6 +38,7 @@ void get_sys_info (sys_info_t * sysInfo)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint plat_ratio,e500_ratio,half_freqSystemBus;
+	uint lcrr_div;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
@@ -60,6 +62,30 @@ void get_sys_info (sys_info_t * sysInfo)
 			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
 #endif
+
+#if defined(CONFIG_SYS_LBC_LCRR)
+	/* We will program LCRR to this value later */
+	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
+#else
+	{
+	    volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+	    lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
+	}
+#endif
+	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
+#if !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
+    !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
+		/*
+		 * Yes, the entire PQ38 family use the same
+		 * bit-representation for twice the clock divider values.
+		 */
+		lcrr_div *= 2;
+#endif
+		sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
+	} else {
+		/* In case anyone cares what the unknown value is */
+		sysInfo->freqLocalBus = lcrr_div;
+	}
 }
 
 
@@ -82,6 +108,7 @@ int get_clocks (void)
 	gd->cpu_clk = sys_info.freqProcessor;
 	gd->bus_clk = sys_info.freqSystemBus;
 	gd->mem_clk = sys_info.freqDDRBus;
+	gd->lbc_clk = sys_info.freqLocalBus;
 
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,

cpu/mpc85xx/start.S

@@ -184,19 +184,19 @@ _start_e500:
 	mtspr	DBCR0,r0
 #endif
 
-	/* create a temp mapping in AS=1 to the boot window */
+	/* create a temp mapping in AS=1 to the 4M boot window */
 	lis     r6,FSL_BOOKE_MAS0(1, 15, 0)@h
 	ori     r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
 
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l
+	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
+	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
 
-	/* Align the mapping to 16MB */
-	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l
+	lis     r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
+	ori     r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
 
-	lis     r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
+	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
 
 	mtspr   MAS0,r6
 	mtspr   MAS1,r7

cpu/mpc85xx/tlb.c

@@ -26,6 +26,11 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
 
 void set_tlb(u8 tlb, u32 epn, u64 rpn,
 	     u8 perms, u8 wimge,
@@ -47,6 +52,11 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
 	mtspr(MAS7, _mas7);
 #endif
 	asm volatile("isync;msync;tlbwe;isync");
+
+#ifdef CONFIG_ADDR_MAP
+	if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
+		addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
+#endif
 }
 
 void disable_tlb(u8 esel)
@@ -67,6 +77,11 @@ void disable_tlb(u8 esel)
 	mtspr(MAS7, _mas7);
 #endif
 	asm volatile("isync;msync;tlbwe;isync");
+
+#ifdef CONFIG_ADDR_MAP
+	if (gd->flags & GD_FLG_RELOC)
+		addrmap_set_entry(0, 0, 0, esel);
+#endif
 }
 
 void invalidate_tlb(u8 tlb)
@@ -91,6 +106,29 @@ void init_tlbs(void)
 	return ;
 }
 
+#ifdef CONFIG_ADDR_MAP
+void init_addr_map(void)
+{
+	int i;
+
+	for (i = 0; i < num_tlb_entries; i++) {
+		if (tlb_table[i].tlb == 0)
+			continue;
+
+		addrmap_set_entry(tlb_table[i].epn,
+			tlb_table[i].rpn,
+			(1UL << ((tlb_table[i].tsize * 2) + 10)),
+			tlb_table[i].esel);
+	}
+
+	return ;
+}
+#endif
+
+#ifndef CONFIG_SYS_DDR_TLB_START
+#define CONFIG_SYS_DDR_TLB_START 8
+#endif
+
 unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 {
 	unsigned int tlb_size;
@@ -137,7 +175,7 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 	 * Configure DDR TLB1 entries.
 	 * Starting at TLB1 8, use no more than 8 TLB1 entries.
 	 */
-	ram_tlb_index = 8;
+	ram_tlb_index = CONFIG_SYS_DDR_TLB_START;
 	ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
 	while (ram_tlb_address < (memsize_in_meg * 1024 * 1024)
 	      && ram_tlb_index < 16) {

cpu/mpc86xx/cpu.c

@@ -39,8 +39,6 @@ checkcpu(void)
 	uint pvr, svr;
 	uint ver;
 	uint major, minor;
-	uint lcrr;		/* local bus clock ratio register */
-	uint clkdiv;		/* clock divider portion of lcrr */
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 
@@ -100,22 +98,11 @@ checkcpu(void)
 	printf("MPX:%4lu MHz, ", sysinfo.freqSystemBus / 1000000);
 	printf("DDR:%4lu MHz, ", sysinfo.freqSystemBus / 2000000);
 
-#if defined(CONFIG_SYS_LBC_LCRR)
-	lcrr = CONFIG_SYS_LBC_LCRR;
-#else
-	{
-		volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
-
-		lcrr = lbc->lcrr;
-	}
-#endif
-	clkdiv = lcrr & 0x0f;
-	if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) {
-		printf("LBC:%4lu MHz\n",
-		       sysinfo.freqSystemBus / 1000000 / clkdiv);
+	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
+		printf("LBC:%4lu MHz\n", sysinfo.freqLocalBus / 1000000);
 	} else {
-		printf("    LBC: unknown (lcrr: 0x%08x)\n", lcrr);
+		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
+		       sysinfo.freqLocalBus);
 	}
 
 	puts("    L2: ");

cpu/mpc86xx/fdt.c

@@ -29,6 +29,13 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 			     "bus-frequency", bd->bi_busfreq, 1);
 
+#if defined(CONFIG_MPC8641)
+	do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
+			       "bus-frequency", gd->lbc_clk, 1);
+#endif
+	do_fixup_by_compat_u32(blob, "fsl,elbc",
+			       "bus-frequency", gd->lbc_clk, 1);
+
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \

cpu/mpc86xx/speed.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <mpc86xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -39,6 +40,7 @@ void get_sys_info(sys_info_t *sysInfo)
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint plat_ratio, e600_ratio;
+	uint lcrr_div;
 
 	plat_ratio = (gur->porpllsr) & 0x0000003e;
 	plat_ratio >>= 1;
@@ -90,6 +92,22 @@ void get_sys_info(sys_info_t *sysInfo)
 		sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
 		break;
 	}
+
+#if defined(CONFIG_SYS_LBC_LCRR)
+	/* We will program LCRR to this value later */
+	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
+#else
+	{
+		volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+		lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
+	}
+#endif
+	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
+		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
+	} else {
+		/* In case anyone cares what the unknown value is */
+		sysInfo->freqLocalBus = lcrr_div;
+	}
 }
 
 
@@ -105,6 +123,7 @@ int get_clocks(void)
 	get_sys_info(&sys_info);
 	gd->cpu_clk = sys_info.freqProcessor;
 	gd->bus_clk = sys_info.freqSystemBus;
+	gd->lbc_clk = sys_info.freqLocalBus;
 
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,

doc/README.at91

@@ -3,7 +3,7 @@ Atmel AT91 Evaluation kits
 http://atmel.com/dyn/products/tools.asp?family_id=605#1443
 
 ------------------------------------------------------------------------------
-AT91SAM9260EK
+AT91SAM9260EK & AT91SAM9XEEK
 ------------------------------------------------------------------------------
 
 Memory map

doc/README.qemu_mips

@@ -17,19 +17,103 @@ create image:
 start it:
 # qemu-system-mips -M mips -pflash flash -monitor null -nographic
 
+2) Download kernel + initrd
+
+On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
+you can downland
+
+#config to build the kernel
+qemu_mips_defconfig
+#patch to fix mips interupt init on 2.6.24.y kernel
+qemu_mips_kernel.patch
+initrd.gz
+vmlinux
+vmlinux.bin
+System.map
+
+4) Generate uImage
+
+# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
+
+5) Copy uImage to Flash
+# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
+
+6) Generate Ide Disk
+
+# dd of=ide bs=1k cout=100k if=/dev/zero
+
+# sfdisk -C 261 -d ide
+# partition table of ide
+unit: sectors
+
+     ide1 : start=       63, size=    32067, Id=83
+     ide2 : start=    32130, size=    32130, Id=83
+     ide3 : start=    64260, size=  4128705, Id=83
+     ide4 : start=        0, size=        0, Id= 0
+
+7) Copy to ide
+
+# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
+
+8) Generate ext2 on part 2 on Copy uImage and initrd.gz
+
+# Attached as loop device ide offset = 32130 * 512
+# losetup -o 16450560 -f ide
+# Format as ext2 ( arg2 : nb blocks)
+# mke2fs /dev/loop0 16065
+# losetup -d /dev/loop0
+# Mount and copy uImage and initrd.gz to it
+# mount -o loop,offset=16450560 -t ext2 ide /mnt
+# mkdir /mnt/boot
+# cp {initrd.gz,uImage} /mnt/boot/
+# Umount it
+# umount /mnt
+
+9) Set Environment
+
+setenv rd_start 0x80800000
+setenv rd_size 2663940
+setenv kernel BFC38000
+setenv oad_addr 80500000
+setenv load_addr2 80F00000
+setenv kernel_flash BFC38000
+setenv load_addr_hello 80200000
+setenv bootargs 'root=/dev/ram0 init=/bin/sh'
+setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
+setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
+setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
+setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
+setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
+setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
+setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
+setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
+setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
+setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
+setenv bootcmd 'run boot_tftp_flash'
+
+10) Now you can boot from flash, ide, ide+ext2 and tfp
+
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
+
 II) How to debug U-Boot
 
 In order to debug U-Boot you need to start qemu with gdb server support (-s)
 and waiting the connection to start the CPU (-S)
 
-# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic
+# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
 
 in an other console you start gdb
 
 1) Debugging of U-Boot Before Relocation
 
 Before relocation, the addresses in the ELF file can be used without any problems
-buy connecting to the gdb server localhost:1234
+by connecting to the gdb server localhost:1234
 
 # mipsel-unknown-linux-gnu-gdb u-boot
 GNU gdb 6.6

drivers/gpio/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB 	:= $(obj)libgpio.a
+
+COBJS-$(CONFIG_PCA953X)	+= pca953x.o
+
+COBJS	:= $(COBJS-y)
+SRCS 	:= $(COBJS:.o=.c)
+OBJS 	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+########################################################################

drivers/gpio/pca953x.c

@@ -0,0 +1,227 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Driver for NXP's 4 and 8 bit I2C gpio expanders (eg pca9537, pca9557, etc)
+ * TODO: support additional devices with more than 8-bits GPIO
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <pca953x.h>
+
+/* Default to an address that hopefully won't corrupt other i2c devices */
+#ifndef CONFIG_SYS_I2C_PCA953X_ADDR
+#define CONFIG_SYS_I2C_PCA953X_ADDR	(~0)
+#endif
+
+enum {
+	PCA953X_CMD_INFO,
+	PCA953X_CMD_DEVICE,
+	PCA953X_CMD_OUTPUT,
+	PCA953X_CMD_INPUT,
+	PCA953X_CMD_INVERT,
+};
+
+/*
+ * Modify masked bits in register
+ */
+static int pca953x_reg_write(uint8_t chip, uint addr, uint mask, uint data)
+{
+	uint8_t val;
+
+	if (i2c_read(chip, addr, 1, &val, 1))
+		return -1;
+
+	val &= ~mask;
+	val |= data;
+
+	return i2c_write(chip, addr, 1, &val, 1);
+}
+
+/*
+ * Set output value of IO pins in 'mask' to corresponding value in 'data'
+ * 0 = low, 1 = high
+ */
+int pca953x_set_val(uint8_t chip, uint mask, uint data)
+{
+	return pca953x_reg_write(chip, PCA953X_OUT, mask, data);
+}
+
+/*
+ * Set read polarity of IO pins in 'mask' to corresponding value in 'data'
+ * 0 = read pin value, 1 = read inverted pin value
+ */
+int pca953x_set_pol(uint8_t chip, uint mask, uint data)
+{
+	return pca953x_reg_write(chip, PCA953X_POL, mask, data);
+}
+
+/*
+ * Set direction of IO pins in 'mask' to corresponding value in 'data'
+ * 0 = output, 1 = input
+ */
+int pca953x_set_dir(uint8_t chip, uint mask, uint data)
+{
+	return pca953x_reg_write(chip, PCA953X_CONF, mask, data);
+}
+
+/*
+ * Read current logic level of all IO pins
+ */
+int pca953x_get_val(uint8_t chip)
+{
+	uint8_t val;
+
+	if (i2c_read(chip, 0, 1, &val, 1))
+		return -1;
+
+	return (int)val;
+}
+
+#ifdef CONFIG_CMD_PCA953X
+#ifdef CONFIG_CMD_PCA953X_INFO
+/*
+ * Display pca953x information
+ */
+static int pca953x_info(uint8_t chip)
+{
+	int i;
+	uint8_t data;
+
+	printf("pca953x@ 0x%x:\n\n", chip);
+	printf("gpio pins: 76543210\n");
+	printf("-------------------\n");
+
+	if (i2c_read(chip, PCA953X_CONF, 1, &data, 1))
+		return -1;
+	printf("conf:      ");
+	for (i = 7; i >= 0; i--)
+		printf("%c", data & (1 << i) ? 'i' : 'o');
+	printf("\n");
+
+	if (i2c_read(chip, PCA953X_POL, 1, &data, 1))
+		return -1;
+	printf("invert:    ");
+	for (i = 7; i >= 0; i--)
+		printf("%c", data & (1 << i) ? '1' : '0');
+	printf("\n");
+
+	if (i2c_read(chip, PCA953X_IN, 1, &data, 1))
+		return -1;
+	printf("input:     ");
+	for (i = 7; i >= 0; i--)
+		printf("%c", data & (1 << i) ? '1' : '0');
+	printf("\n");
+
+	if (i2c_read(chip, PCA953X_OUT, 1, &data, 1))
+		return -1;
+	printf("output:    ");
+	for (i = 7; i >= 0; i--)
+		printf("%c", data & (1 << i) ? '1' : '0');
+	printf("\n");
+
+	return 0;
+}
+#endif /* CONFIG_CMD_PCA953X_INFO */
+
+cmd_tbl_t cmd_pca953x[] = {
+	U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""),
+	U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""),
+	U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""),
+	U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""),
+#ifdef CONFIG_CMD_PCA953X_INFO
+	U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""),
+#endif
+};
+
+int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	static uint8_t chip = CONFIG_SYS_I2C_PCA953X_ADDR;
+	int val;
+	ulong ul_arg2 = 0;
+	ulong ul_arg3 = 0;
+	cmd_tbl_t *c;
+
+	c = find_cmd_tbl(argv[1], cmd_pca953x, ARRAY_SIZE(cmd_pca953x));
+
+	/* All commands but "device" require 'maxargs' arguments */
+	if (!c || !((argc == (c->maxargs)) ||
+		(((int)c->cmd == PCA953X_CMD_DEVICE) &&
+		 (argc == (c->maxargs - 1))))) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	/* arg2 used as chip number or pin number */
+	if (argc > 2)
+		ul_arg2 = simple_strtoul(argv[2], NULL, 16);
+
+	/* arg3 used as pin or invert value */
+	if (argc > 3)
+		ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1;
+
+	switch ((int)c->cmd) {
+#ifdef CONFIG_CMD_PCA953X_INFO
+	case PCA953X_CMD_INFO:
+		return pca953x_info(chip);
+#endif
+	case PCA953X_CMD_DEVICE:
+		if (argc == 3)
+			chip = (uint8_t)ul_arg2;
+		printf("Current device address: 0x%x\n", chip);
+		return 0;
+	case PCA953X_CMD_INPUT:
+		pca953x_set_dir(chip, (1 << ul_arg2),
+				PCA953X_DIR_IN << ul_arg2);
+		val = (pca953x_get_val(chip) & (1 << ul_arg2)) != 0;
+
+		printf("chip 0x%02x, pin 0x%lx = %d\n", chip, ul_arg2, val);
+		return val;
+	case PCA953X_CMD_OUTPUT:
+		pca953x_set_dir(chip, (1 << ul_arg2),
+				(PCA953X_DIR_OUT << ul_arg2));
+		return pca953x_set_val(chip, (1 << ul_arg2),
+					(ul_arg3 << ul_arg2));
+	case PCA953X_CMD_INVERT:
+		return pca953x_set_pol(chip, (1 << ul_arg2),
+					(ul_arg3 << ul_arg2));
+	default:
+		/* We should never get here */
+		return 1;
+	}
+}
+
+U_BOOT_CMD(
+	pca953x,	5,	1,	do_pca953x,
+	"pca953x	- pca953x gpio access\n",
+	"device [dev]\n"
+	"	- show or set current device address\n"
+#ifdef CONFIG_CMD_PCA953X_INFO
+	"pca953x info\n"
+	"	- display info for current chip\n"
+#endif
+	"pca953x output pin 0|1\n"
+	"	- set pin as output and drive low or high\n"
+	"pca953x invert pin 0|1\n"
+	"	- disable/enable polarity inversion for reads\n"
+	"pca953x intput pin\n"
+	"	- set pin as input and read value\n"
+);
+
+#endif /* CONFIG_CMD_PCA953X */

drivers/mtd/nand/fsl_elbc_nand.c

@@ -718,7 +718,7 @@ static void fsl_elbc_ctrl_init(void)
 int board_nand_init(struct nand_chip *nand)
 {
 	struct fsl_elbc_mtd *priv;
-	uint32_t br, or;
+	uint32_t br = 0, or = 0;
 
 	if (!elbc_ctrl) {
 		fsl_elbc_ctrl_init();
@@ -737,11 +737,13 @@ int board_nand_init(struct nand_chip *nand)
 	 * if we could pass more than one datum to the NAND driver...
 	 */
 	for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
+		phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R);
+
 		br = in_be32(&elbc_ctrl->regs->bank[priv->bank].br);
 		or = in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
 
 		if ((br & BR_V) && (br & BR_MSEL) == BR_MS_FCM &&
-		    (br & or & BR_BA) == (phys_addr_t)nand->IO_ADDR_R)
+		    (br & or & BR_BA) == BR_PHYS_ADDR(base_addr))
 			break;
 	}
 

drivers/mtd/nand/nand_base.c

@@ -460,8 +460,8 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
 	struct nand_chip *chip = mtd->priv;
 
 	if (!(chip->options & NAND_BBT_SCANNED)) {
-		chip->scan_bbt(mtd);
 		chip->options |= NAND_BBT_SCANNED;
+		chip->scan_bbt(mtd);
 	}
 
 	if (!chip->bbt)

drivers/pci/fsl_pci_init.c

@@ -37,6 +37,11 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <pci.h>
 #include <asm/immap_fsl_pci.h>
 
+/* Freescale-specific PCI config registers */
+#define FSL_PCI_PBFR		0x44
+#define FSL_PCIE_CAP_ID		0x4c
+#define FSL_PCIE_CFG_RDY	0x4b0
+
 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 				pci_dev_t dev, int sub_bus);
 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
@@ -306,6 +311,30 @@ void fsl_pci_init(struct pci_controller *hose)
 	}
 }
 
+/* Enable inbound PCI config cycles for agent/endpoint interface */
+void fsl_pci_config_unlock(struct pci_controller *hose)
+{
+	pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
+	u8 agent;
+	u8 pcie_cap;
+	u16 pbfr;
+
+	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent);
+	if (!agent)
+		return;
+
+	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+	if (pcie_cap != 0x0) {
+		/* PCIe - set CFG_READY bit of Configuration Ready Register */
+		pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
+	} else {
+		/* PCI - clear ACL bit of PBFR */
+		pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
+		pbfr &= ~0x20;
+		pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr);
+	}
+}
+
 #ifdef CONFIG_OF_BOARD_SETUP
 #include <libfdt.h>
 #include <fdt_support.h>

include/asm-arm/arch-at91rm9200/AT91RM9200.h

@@ -781,5 +781,32 @@ typedef struct _AT91S_PDC
 #define AT91C_PIOB_ODR		((AT91_REG *)	0xFFFFF614) /* (PIOB) Output Disable Registerr */
 #define AT91C_PIOB_PDSR		((AT91_REG *)	0xFFFFF63C) /* (PIOB) Pin Data Status Register */
 
+#else
+/* flash */
+#define AT91C_MC_PUIA		0xFFFFFF10
+#define AT91C_MC_PUP		0xFFFFFF50
+#define AT91C_MC_PUER		0xFFFFFF54
+#define AT91C_MC_ASR		0xFFFFFF04
+#define AT91C_MC_AASR		0xFFFFFF08
+#define AT91C_EBI_CFGR		0xFFFFFF64
+#define AT91C_SMC_CSR0		0xFFFFFF70
+
+/* clocks */
+#define AT91C_PLLAR		0xFFFFFC28
+#define AT91C_PLLBR		0xFFFFFC2C
+#define AT91C_MCKR		0xFFFFFC30
+
+#define AT91C_BASE_CKGR		0xFFFFFC20
+#define AT91C_CKGR_MOR		0
+
+/* sdram */
+#define AT91C_PIOC_ASR		0xFFFFF870
+#define AT91C_PIOC_BSR		0xFFFFF874
+#define AT91C_PIOC_PDR		0xFFFFF804
+#define AT91C_EBI_CSA		0xFFFFFF60
+#define AT91C_SDRC_CR		0xFFFFFF98
+#define AT91C_SDRC_MR		0xFFFFFF90
+#define AT91C_SDRC_TR		0xFFFFFF94
+
 #endif /* __ASSEMBLY__ */
 #endif /* AT91RM9200_H */

include/asm-ppc/fsl_lbc.h

@@ -300,7 +300,10 @@
 #define LCRR_EADC_2			0x00020000
 #define LCRR_EADC_3			0x00030000
 #define LCRR_EADC_4			0x00000000
-#define LCRR_CLKDIV			0x0000000F
+/* CLKDIV is five bits only on 8536, 8572, and 8610, so far, but the fifth bit
+ * should always be zero on older parts that have a four bit CLKDIV.
+ */
+#define LCRR_CLKDIV			0x0000001F
 #define LCRR_CLKDIV_SHIFT		0
 #define LCRR_CLKDIV_2			0x00000002
 #define LCRR_CLKDIV_4			0x00000004

include/asm-ppc/global_data.h

@@ -89,6 +89,9 @@ typedef	struct	global_data {
 #if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8536)
 	u32 sdhc_clk;
 #endif
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+	u32 lbc_clk;
+#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
 #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 	u32 i2c1_clk;
 	u32 i2c2_clk;

include/asm-ppc/io.h

@@ -10,6 +10,10 @@
 #include <linux/config.h>
 #include <asm/byteorder.h>
 
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
 #define SIO_CONFIG_RA   0x398
 #define SIO_CONFIG_RD   0x399
 
@@ -287,7 +291,11 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 static inline void *
 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 {
+#ifdef CONFIG_ADDR_MAP
+	return (void *)(addrmap_phys_to_virt(paddr));
+#else
 	return (void *)((unsigned long)paddr);
+#endif
 }
 
 /*
@@ -300,7 +308,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 static inline phys_addr_t virt_to_phys(void * vaddr)
 {
+#ifdef CONFIG_ADDR_MAP
+	return addrmap_virt_to_phys(vaddr);
+#else
 	return (phys_addr_t)((unsigned long)vaddr);
+#endif
 }
 
 #endif

include/asm-ppc/mmu.h

@@ -431,6 +431,9 @@ extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
 extern void disable_tlb(u8 esel);
 extern void invalidate_tlb(u8 tlb);
 extern void init_tlbs(void);
+#ifdef CONFIG_ADDR_MAP
+extern void init_addr_map(void);
+#endif
 extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
 
 #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \

include/configs/MPC8572DS.h

@@ -92,6 +92,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR+0xa000)
 
 /* DDR Setup */
+#define CONFIG_SYS_DDR_TLB_START 9
 #define CONFIG_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */

include/configs/MPC8610HPCD.h

@@ -273,11 +273,13 @@
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCI1_MEM_VIRT	CONFIG_SYS_PCI1_MEM_BUS
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS	0x0000000
 #define CONFIG_SYS_PCI1_IO_PHYS	0xe1000000
+#define CONFIG_SYS_PCI1_IO_VIRT	0xe1000000
 #define CONFIG_SYS_PCI1_IO_SIZE	0x00100000	/* 1M */
 
 /* For RTL8139 */
@@ -285,18 +287,18 @@
 #define _IO_BASE		0x00000000
 
 /* controller 1, Base address 0xa000 */
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xe3000000
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00100000	/* 1M */
 
 /* controller 2, Base Address 0x9000 */
-#define CONFIG_SYS_PCIE2_MEM_BASE	0x90000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS	0x90000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BUS
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000	/* reuse mem LAW */
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000	/* reuse mem LAW */
 #define CONFIG_SYS_PCIE2_IO_PHYS	0xe2000000
 #define CONFIG_SYS_PCIE2_IO_SIZE	0x00100000	/* 1M */
 
@@ -364,7 +366,7 @@
 
 #define CONFIG_SYS_DBAT1L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_1G | BATU_VS | BATU_VP)
 #define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
@@ -375,7 +377,7 @@
 
 #define CONFIG_SYS_DBAT2L	(CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCI1_IO_PHYS | BATU_BL_16M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_16M | BATU_VS | BATU_VP)
 #define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 

include/configs/XPEDITE5200.h

@@ -0,0 +1,546 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * xpedite5200 board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548		1
+#define CONFIG_XPEDITE5200	1
+#define CONFIG_SYS_BOARD_NAME	"XPedite5200"
+#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
+#define CONFIG_RELOC_FIXUP_WORKS	/* Fully relocate to SDRAM */
+
+#define CONFIG_PCI		1	/* Enable PCI/PCIE */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
+#define CONFIG_PCI1		1	/* PCI controller 1 */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
+#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
+
+/*
+ * DDR config
+ */
+#define CONFIG_FSL_DDR2
+#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
+#define CONFIG_DDR_SPD
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#define SPD_EEPROM_ADDRESS		0x54
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	2
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#define CONFIG_SYS_CLK_FREQ	66666666
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xef000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_PCI1_ADDR	(CONFIG_SYS_CCSRBAR + 0x8000)
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+
+/*
+ * Memory map
+ * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
+ * 0x8000_0000	0xbfff_ffff	PCI1 Mem		1G non-cacheable
+ * 0xe000_0000	0xe7ff_ffff	SRAM/SSRAM/L1 Cache	128M non-cacheable
+ * 0xe800_0000	0xe87f_ffff	PCI1 IO			8M non-cacheable
+ * 0xef00_0000	0xef0f_ffff	CCSR/IMMR		1M non-cacheable
+ * 0xef80_0000	0xef8f_ffff	NAND Flash		1M non-cacheable
+ * 0xf800_0000	0xfbff_ffff	NOR Flash 2		64M non-cacheable
+ * 0xfc00_0000	0xffff_ffff	NOR Flash 1		64M non-cacheable
+ */
+
+#define CONFIG_SYS_LBC_LCRR	(LCRR_CLKDIV_4 | LCRR_EADC_3)
+
+/*
+ * NAND flash configuration
+ */
+#define CONFIG_SYS_NAND_BASE		0xef800000
+#define CONFIG_SYS_NAND_BASE2		0xef840000 /* Unused at this time */
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_NAND_ACTL
+#define CONFIG_SYS_NAND_ACTL_CLE	(1 << 3)	/* ADDR3 is CLE */
+#define CONFIG_SYS_NAND_ACTL_ALE	(1 << 4)	/* ADDR4 is ALE */
+#define CONFIG_SYS_NAND_ACTL_NCE	(0)		/* NCE not controlled by ADDR */
+#define CONFIG_SYS_NAND_ACTL_DELAY	25
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE		0xfc000000
+#define CONFIG_SYS_FLASH_BASE2		0xf8000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST	{ {0xfff40000, 0xc0000}, \
+						  {0xfbf40000, 0xc0000} }
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+/*
+ * Chip select configuration
+ */
+/* NOR Flash 0 on CS0 */
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE	| \
+				 BR_PS_16		| \
+				 BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(OR_AM_64MB		| \
+				 OR_GPCM_ACS_DIV4	| \
+				 OR_GPCM_SCY_8)
+
+/* NOR Flash 1 on CS1 */
+#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_FLASH_BASE2	| \
+				 BR_PS_16		| \
+				 BR_V)
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_BR2_PRELIM	(CONFIG_SYS_NAND_BASE	| \
+				 BR_PS_8		| \
+				 BR_V)
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_OR2_PRELIM	(OR_AM_256KB		| \
+				 OR_GPCM_BCTLD		| \
+				 OR_GPCM_CSNT		| \
+				 OR_GPCM_ACS_DIV4	| \
+				 OR_GPCM_SCY_4		| \
+				 OR_GPCM_TRLX		| \
+				 OR_GPCM_EHTR)
+
+/* NAND flash on CS3 */
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_NAND_BASE2	| \
+				 BR_PS_8		| \
+				 BR_V)
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+
+/*
+ * Use L1 as initial stack
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe0000000
+#define CONFIG_SYS_INIT_RAM_END		0x4000
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C				/* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+
+/* I2C EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6	/* 64 byte pages */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* take up to 10 msec */
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11			1
+#define CONFIG_SYS_I2C_RTC_ADDR			0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR		2000
+
+/* GPIO */
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR0		0x18
+#define CONFIG_SYS_I2C_PCA953X_ADDR1		0x19
+#define CONFIG_SYS_I2C_PCA953X_ADDR		CONFIG_SYS_I2C_PCA953X_ADDR0
+
+/* PCA957 @ 0x18 */
+#define CONFIG_SYS_PCA953X_BRD_CFG0		0x01
+#define CONFIG_SYS_PCA953X_BRD_CFG1		0x02
+#define CONFIG_SYS_PCA953X_BRD_CFG2		0x04
+#define CONFIG_SYS_PCA953X_XMC_ROOT0		0x08
+#define CONFIG_SYS_PCA953X_FLASH_PASS_CS	0x10
+#define CONFIG_SYS_PCA953X_FLASH_WP		0x20
+#define CONFIG_SYS_PCA953X_MONARCH		0x40
+#define CONFIG_SYS_PCA953X_EREADY		0x80
+
+/* PCA957 @ 0x19 */
+#define CONFIG_SYS_PCA953X_P14_IO0		0x01
+#define CONFIG_SYS_PCA953X_P14_IO1		0x02
+#define CONFIG_SYS_PCA953X_P14_IO2		0x04
+#define CONFIG_SYS_PCA953X_P14_IO3		0x08
+#define CONFIG_SYS_PCA953X_P14_IO4		0x10
+#define CONFIG_SYS_PCA953X_P14_IO5		0x20
+#define CONFIG_SYS_PCA953X_P14_IO6		0x40
+#define CONFIG_SYS_PCA953X_P14_IO7		0x80
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x40000000	/* 1G */
+#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS		0xe8000000
+#define CONFIG_SYS_PCI1_IO_SIZE		0x00800000	/* 1M */
+
+/*
+ * Networking options
+ */
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI	1
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC1"
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC1_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC2"
+#define TSEC2_FLAGS		TSEC_GIGABIT
+#define TSEC2_PHY_ADDR		2
+#define TSEC2_PHYIDX		0
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_TSEC3	1
+#define CONFIG_TSEC3_NAME	"eTSEC3"
+#define TSEC3_FLAGS		TSEC_GIGABIT
+#define TSEC3_PHY_ADDR		3
+#define TSEC3_PHYIDX		0
+#define CONFIG_HAS_ETH2
+
+#define CONFIG_TSEC4	1
+#define CONFIG_TSEC4_NAME	"eTSEC4"
+#define TSEC4_FLAGS		TSEC_GIGABIT
+#define TSEC4_PHY_ADDR		4
+#define TSEC4_PHYIDX		0
+#define CONFIG_HAS_ETH3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+
+/*
+ * Command configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
+#define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG			/* do not reset board on panic */
+#define CONFIG_PREBOOT				/* enable preboot variable */
+#define CONFIG_FIT		1
+#define CONFIG_FIT_VERBOSE	1
+#define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02		/* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff     Pri U-Boot (512 KB)
+ * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff     Pri FDT (256KB)
+ * fef00000 - ffefffff     Pri OS image (16MB)
+ * fc000000 - feefffff     Pri OS Use/Filesystem (47MB)
+ *
+ * fbf80000 - fbffffff     Sec U-Boot (512 KB)
+ * fbf40000 - fbf7ffff     Sec U-Boot Environment (256 KB)
+ * fbf00000 - fbf3ffff     Sec FDT (256KB)
+ * faf00000 - fbefffff     Sec OS image (16MB)
+ * f8000000 - faefffff     Sec OS Use/Filesystem (47MB)
+ */
+#define CONFIG_UBOOT1_ENV_ADDR	MK_STR(0xfff80000)
+#define CONFIG_UBOOT2_ENV_ADDR	MK_STR(0xfbf80000)
+#define CONFIG_FDT1_ENV_ADDR	MK_STR(0xfff00000)
+#define CONFIG_FDT2_ENV_ADDR	MK_STR(0xfbf00000)
+#define CONFIG_OS1_ENV_ADDR	MK_STR(0xfef00000)
+#define CONFIG_OS2_ENV_ADDR	MK_STR(0xfaf00000)
+
+#define CONFIG_PROG_UBOOT1						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_UBOOT2						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_BOOT_OS_NET						\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"if test -n $fdtaddr; then "				\
+			"$download_cmd $fdtaddr $fdtfile; "		\
+			"if test $? -eq 0; then "			\
+				"bootm $osaddr - $fdtaddr; "		\
+			"else; "					\
+				"echo FDT DOWNLOAD FAILED; "		\
+			"fi; "						\
+		"else; "						\
+			"bootm $osaddr; "				\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS1							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS1_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
+		"cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS2							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS2_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
+		"cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT1						\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT2						\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"autoload=yes\0"						\
+	"download_cmd=tftp\0"						\
+	"console_args=console=ttyS0,115200\0"				\
+	"root_args=root=/dev/nfs rw\0"					\
+	"misc_args=ip=on\0"						\
+	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+	"bootfile=/home/user/file\0"					\
+	"osfile=/home/user/uImage-XPedite5200\0"			\
+	"fdtfile=/home/user/xpedite5200.dtb\0"				\
+	"ubootfile=/home/user/u-boot.bin\0"				\
+	"fdtaddr=c00000\0"						\
+	"osaddr=0x1000000\0"						\
+	"loadaddr=0x1000000\0"						\
+	"prog_uboot1="CONFIG_PROG_UBOOT1"\0"				\
+	"prog_uboot2="CONFIG_PROG_UBOOT2"\0"				\
+	"prog_os1="CONFIG_PROG_OS1"\0"					\
+	"prog_os2="CONFIG_PROG_OS2"\0"					\
+	"prog_fdt1="CONFIG_PROG_FDT1"\0"				\
+	"prog_fdt2="CONFIG_PROG_FDT2"\0"				\
+	"bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"		\
+	"bootcmd_flash1=run set_bootargs; "				\
+		"bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
+	"bootcmd_flash2=run set_bootargs; "				\
+		"bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
+	"bootcmd=run bootcmd_flash1\0"
+#endif	/* __CONFIG_H */

include/configs/XPEDITE5370.h

@@ -0,0 +1,589 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * xpedite5370 board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8572		1
+#define CONFIG_XPEDITE5370	1
+#define CONFIG_SYS_BOARD_NAME	"XPedite5370"
+#define CONFIG_NUM_CPUS		2	/* 2 Cores */
+#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
+#define CONFIG_RELOC_FIXUP_WORKS	/* Fully relocate to SDRAM */
+
+#define CONFIG_PCI		1	/* Enable PCI/PCIE */
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 */
+#define CONFIG_PCIE2		1	/* PCIE controler 2 */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
+#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
+#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
+
+/*
+ * DDR config
+ */
+#define CONFIG_FSL_DDR2
+#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
+#define CONFIG_DDR_SPD
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#define SPD_EEPROM_ADDRESS1		0x54	/* Both channels use the */
+#define SPD_EEPROM_ADDRESS2		0x54	/* same SPD data         */
+#define SPD_EEPROM_OFFSET		0x200	/* OFFSET of SPD in EEPROM */
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000 /* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_VERY_BIG_RAM
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+extern unsigned long get_board_ddr_clk(unsigned long dummy);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /* ddrclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#define CONFIG_SYS_CCSRBAR		0xef000000	/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR	/* physical addr of CCSRBAR */
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
+#define CONFIG_SYS_PCIE1_ADDR		(CONFIG_SYS_CCSRBAR + 0xa000)
+#define CONFIG_SYS_PCIE2_ADDR		(CONFIG_SYS_CCSRBAR + 0x9000)
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+
+/*
+ * Memory map
+ * 0x0000_0000	0x7fff_ffff	DDR			2G Cacheable
+ * 0x8000_0000	0xbfff_ffff	PCIe1 Mem		1G non-cacheable
+ * 0xc000_0000	0xcfff_ffff	PCIe2 Mem		256M non-cacheable
+ * 0xe000_0000	0xe7ff_ffff	SRAM/SSRAM/L1 Cache	128M non-cacheable
+ * 0xe800_0000	0xe87f_ffff	PCIe1 IO		8M non-cacheable
+ * 0xe880_0000	0xe8ff_ffff	PCIe2 IO		8M non-cacheable
+ * 0xef00_0000	0xef0f_ffff	CCSR/IMMR		1M non-cacheable
+ * 0xef80_0000	0xef8f_ffff	NAND Flash		1M non-cacheable
+ * 0xf000_0000	0xf7ff_ffff	NOR Flash 2		128M non-cacheable
+ * 0xf800_0000	0xffff_ffff	NOR Flash 1		128M non-cacheable
+ */
+
+#define CONFIG_SYS_LBC_LCRR	(LCRR_CLKDIV_4 | LCRR_EADC_3)
+
+/*
+ * NAND flash configuration
+ */
+#define CONFIG_SYS_NAND_BASE		0xef800000
+#define CONFIG_SYS_NAND_BASE2		0xef840000 /* Unused at this time */
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE		0xf8000000
+#define CONFIG_SYS_FLASH_BASE2		0xf0000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
+#define CONFIG_SYS_MAX_FLASH_BANKS	2		/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024		/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Flash Write Timeout (ms) */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST	{ {0xfff40000, 0xc0000}, \
+						  {0xf7f40000, 0xc0000} }
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+/*
+ * Chip select configuration
+ */
+/* NOR Flash 0 on CS0 */
+#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE	| \
+				 BR_PS_16		| \
+				 BR_V)
+#define CONFIG_SYS_OR0_PRELIM	(OR_AM_128MB		| \
+				 OR_GPCM_CSNT		| \
+				 OR_GPCM_XACS		| \
+				 OR_GPCM_ACS_DIV2	| \
+				 OR_GPCM_SCY_8		| \
+				 OR_GPCM_TRLX		| \
+				 OR_GPCM_EHTR		| \
+				 OR_GPCM_EAD)
+
+/* NOR Flash 1 on CS1 */
+#define CONFIG_SYS_BR1_PRELIM	(CONFIG_SYS_FLASH_BASE2	| \
+				 BR_PS_16		| \
+				 BR_V)
+#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_BR2_PRELIM	(CONFIG_SYS_NAND_BASE	| \
+				 (2<<BR_DECC_SHIFT)	| \
+				 BR_PS_8		| \
+				 BR_MS_FCM		| \
+				 BR_V)
+
+/* NAND flash on CS2 */
+#define CONFIG_SYS_OR2_PRELIM	(OR_AM_256KB	| \
+				 OR_FCM_PGS	| \
+				 OR_FCM_CSCT	| \
+				 OR_FCM_CST	| \
+				 OR_FCM_CHT	| \
+				 OR_FCM_SCY_1	| \
+				 OR_FCM_TRLX	| \
+				 OR_FCM_EHTR)
+
+/* NAND flash on CS3 */
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_NAND_BASE2	| \
+				 (2<<BR_DECC_SHIFT)	| \
+				 BR_PS_8		| \
+				 BR_MS_FCM		| \
+				 BR_V)
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
+
+/*
+ * Use L1 as initial stack
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xe0000000
+#define CONFIG_SYS_INIT_RAM_END		0x00004000
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+#define CONFIG_SYS_64BIT_VSPRINTF	1
+#define CONFIG_SYS_64BIT_STRTOUL	1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C				/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C				/* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+
+/* PEX8518 slave I2C interface */
+#define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
+
+/* I2C DS1631 temperature sensor */
+#define CONFIG_SYS_I2C_DS1621_ADDR	0x48
+#define CONFIG_DTT_DS1621
+#define CONFIG_DTT_SENSORS		{ 0 }
+
+/* I2C EEPROM - AT24C128B */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6	/* 64 byte pages */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* take up to 10 msec */
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11		1
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	2000
+
+/* GPIO/EEPROM/SRAM */
+#define CONFIG_DS4510
+#define CONFIG_SYS_I2C_DS4510_ADDR	0x51
+
+/* GPIO */
+#define CONFIG_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR0	0x18
+#define CONFIG_SYS_I2C_PCA953X_ADDR1	0x1c
+#define CONFIG_SYS_I2C_PCA953X_ADDR2	0x1e
+#define CONFIG_SYS_I2C_PCA953X_ADDR3	0x1f
+#define CONFIG_SYS_I2C_PCA953X_ADDR	CONFIG_SYS_I2C_PCA953X_ADDR0
+
+/*
+ * PU = pulled high, PD = pulled low
+ * I = input, O = output, IO = input/output
+ */
+/* PCA9557 @ 0x18*/
+#define CONFIG_SYS_PCA953X_C0_SER0_EN		0x01 /* PU; UART0 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER0_MODE		0x02 /* PU; UART0 serial mode select */
+#define CONFIG_SYS_PCA953X_C0_SER1_EN		0x04 /* PU; UART1 enable (1: enabled) */
+#define CONFIG_SYS_PCA953X_C0_SER1_MODE		0x08 /* PU; UART1 serial mode select */
+#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS	0x10 /* PU; Boot flash CS select */
+#define CONFIG_SYS_PCA953X_NVM_WP		0x20 /* PU; Set to 0 to enable NVM writing */
+#define CONFIG_SYS_PCA953X_C0_VCORE_VID2	0x40 /* VID2 of ISL6262 */
+#define CONFIG_SYS_PCA953X_C0_VCORE_VID3	0x80 /* VID3 of ISL6262 */
+
+/* PCA9557 @ 0x1c*/
+#define CONFIG_SYS_PCA953X_XMC0_ROOT0		0x01 /* PU; Low if XMC is RC */
+#define CONFIG_SYS_PCA953X_XMC0_MVMR0		0x02 /* XMC EEPROM write protect */
+#define CONFIG_SYS_PCA953X_XMC0_WAKE		0x04 /* PU; XMC wake */
+#define CONFIG_SYS_PCA953X_XMC0_BIST		0x08 /* PU; XMC built in self test */
+#define CONFIG_SYS_PCA953X_XMC_PRESENT		0x10 /* PU; Low if XMC module installed */
+#define CONFIG_SYS_PCA953X_PMC_PRESENT		0x20 /* PU; Low if PMC module installed */
+#define CONFIG_SYS_PCA953X_PMC0_MONARCH		0x40 /* PMC monarch mode enable */
+#define CONFIG_SYS_PCA953X_PMC0_EREADY		0x80 /* PU; PMC PCI eready */
+
+/* PCA9557 @ 0x1e*/
+#define CONFIG_SYS_PCA953X_P0_GA0		0x01 /* PU; VPX Geographical address */
+#define CONFIG_SYS_PCA953X_P0_GA1		0x02 /* PU; VPX Geographical address */
+#define CONFIG_SYS_PCA953X_P0_GA2		0x04 /* PU; VPX Geographical address */
+#define CONFIG_SYS_PCA953X_P0_GA3		0x08 /* PU; VPX Geographical address */
+#define CONFIG_SYS_PCA953X_P0_GA4		0x10 /* PU; VPX Geographical address */
+#define CONFIG_SYS_PCA953X_P0_GAP		0x20 /* PU; tied to VPX P0.GAP */
+#define CONFIG_SYS_PCA953X_P1_SYSEN		0x80 /* PU; Pulled high; tied to VPX P1.SYSCON */
+
+/* PCA9557 @ 0x1f */
+#define CONFIG_SYS_PCA953X_GPIO_VPX0		0x01 /* PU */
+#define CONFIG_SYS_PCA953X_GPIO_VPX1		0x02 /* PU */
+#define CONFIG_SYS_PCA953X_GPIO_VPX2		0x04 /* PU */
+#define CONFIG_SYS_PCA953X_GPIO_VPX3		0x08 /* PU */
+#define CONFIG_SYS_PCA953X_VPX_FRU_WRCTL	0x10 /* PD; I2C master source for FRU SEEPROM */
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+/* PCIE1 - VPX P1 */
+#define CONFIG_SYS_PCIE1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x40000000	/* 1G */
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xe8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */
+
+/* PCIE2 - PEX8518 */
+#define CONFIG_SYS_PCIE2_MEM_BASE	0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xe8800000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000	/* 8M */
+
+/*
+ * Networking options
+ */
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI	1
+#define CONFIG_TSEC_TBI
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
+#define CONFIG_ETHPRIME		"eTSEC2"
+
+#define CONFIG_TSEC1		1
+#define CONFIG_TSEC1_NAME	"eTSEC1"
+#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC1_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define CONFIG_HAS_ETH0
+
+#define CONFIG_TSEC2		1
+#define CONFIG_TSEC2_NAME	"eTSEC2"
+#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_PHY_ADDR		2
+#define TSEC2_PHYIDX		0
+#define CONFIG_HAS_ETH1
+
+/*
+ * Command configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DS4510
+#define CONFIG_CMD_DS4510_INFO
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks */
+#define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
+#define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG			/* do not reset board on panic */
+#define CONFIG_PREBOOT				/* enable preboot variable */
+#define CONFIG_FIT		1
+#define CONFIG_FIT_VERBOSE	1
+#define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)	/* Initial Memory map for Linux*/
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02		/* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff     Pri U-Boot (512 KB)
+ * fff40000 - fff7ffff     Pri U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff     Pri FDT (256KB)
+ * fef00000 - ffefffff     Pri OS image (16MB)
+ * f8000000 - feefffff     Pri OS Use/Filesystem (111MB)
+ *
+ * f7f80000 - f7ffffff     Sec U-Boot (512 KB)
+ * f7f40000 - f7f7ffff     Sec U-Boot Environment (256 KB)
+ * f7f00000 - f7f3ffff     Sec FDT (256KB)
+ * f6f00000 - f7efffff     Sec OS image (16MB)
+ * f0000000 - f6efffff     Sec OS Use/Filesystem (111MB)
+ */
+#define CONFIG_UBOOT1_ENV_ADDR	MK_STR(0xfff80000)
+#define CONFIG_UBOOT2_ENV_ADDR	MK_STR(0xf7f80000)
+#define CONFIG_FDT1_ENV_ADDR	MK_STR(0xfff00000)
+#define CONFIG_FDT2_ENV_ADDR	MK_STR(0xf7f00000)
+#define CONFIG_OS1_ENV_ADDR	MK_STR(0xfef00000)
+#define CONFIG_OS2_ENV_ADDR	MK_STR(0xf6f00000)
+
+#define CONFIG_PROG_UBOOT1						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_UBOOT2						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_BOOT_OS_NET						\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"if test -n $fdtaddr; then "				\
+			"$download_cmd $fdtaddr $fdtfile; "		\
+			"if test $? -eq 0; then "			\
+				"bootm $osaddr - $fdtaddr; "		\
+			"else; "					\
+				"echo FDT DOWNLOAD FAILED; "		\
+			"fi; "						\
+		"else; "						\
+			"bootm $osaddr; "				\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS1							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS1_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
+		"cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS2							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS2_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
+		"cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT1						\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT2						\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"autoload=yes\0"						\
+	"download_cmd=tftp\0"						\
+	"console_args=console=ttyS0,115200\0"				\
+	"root_args=root=/dev/nfs rw\0"					\
+	"misc_args=ip=on\0"						\
+	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+	"bootfile=/home/user/file\0"					\
+	"osfile=/home/user/uImage-XPedite5370\0"			\
+	"fdtfile=/home/user/xpedite5370.dtb\0"				\
+	"ubootfile=/home/user/u-boot.bin\0"				\
+	"fdtaddr=c00000\0"						\
+	"osaddr=0x1000000\0"						\
+	"loadaddr=0x1000000\0"						\
+	"prog_uboot1="CONFIG_PROG_UBOOT1"\0"				\
+	"prog_uboot2="CONFIG_PROG_UBOOT2"\0"				\
+	"prog_os1="CONFIG_PROG_OS1"\0"					\
+	"prog_os2="CONFIG_PROG_OS2"\0"					\
+	"prog_fdt1="CONFIG_PROG_FDT1"\0"				\
+	"prog_fdt2="CONFIG_PROG_FDT2"\0"				\
+	"bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"		\
+	"bootcmd_flash1=run set_bootargs; "				\
+		"bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
+	"bootcmd_flash2=run set_bootargs; "				\
+		"bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
+	"bootcmd=run bootcmd_flash1\0"
+#endif	/* __CONFIG_H */

include/configs/at91rm9200dk.h

@@ -45,33 +45,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
-#define MC_PUIA_VAL	0x00000000
-#define MC_PUP_VAL	0x00000000
-#define MC_PUER_VAL	0x00000000
-#define MC_ASR_VAL	0x00000000
-#define MC_AASR_VAL	0x00000000
-#define EBI_CFGR_VAL	0x00000000
-#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL	0x00000000
+#define CONFIG_SYS_MC_PUP_VAL	0x00000000
+#define CONFIG_SYS_MC_PUER_VAL	0x00000000
+#define CONFIG_SYS_MC_ASR_VAL	0x00000000
+#define CONFIG_SYS_MC_AASR_VAL	0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
-#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL	0x00000000
-#define PIOC_PDR_VAL	0xFFFF0000
-#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL	0x2188c155 /* set up the SDRAM */
-#define SDRAM		0x20000000 /* address of the SDRAM */
-#define SDRAM1		0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1	0x00000004 /* refresh */
-#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL	0x2188c155 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

include/configs/cmc_pu2.h

@@ -44,33 +44,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
-#define MC_PUIA_VAL	0x00000000
-#define MC_PUP_VAL	0x00000000
-#define MC_PUER_VAL	0x00000000
-#define MC_ASR_VAL	0x00000000
-#define MC_AASR_VAL	0x00000000
-#define EBI_CFGR_VAL	0x00000000
-#define SMC_CSR0_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL	0x00000000
+#define CONFIG_SYS_MC_PUP_VAL	0x00000000
+#define CONFIG_SYS_MC_PUER_VAL	0x00000000
+#define CONFIG_SYS_MC_ASR_VAL	0x00000000
+#define CONFIG_SYS_MC_AASR_VAL	0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
-#define PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL	0x00000000
-#define PIOC_PDR_VAL	0xFFFF0000
-#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL	0x3399c1d4 /* set up the SDRAM */
-#define SDRAM		0x20000000 /* address of the SDRAM */
-#define SDRAM1		0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1	0x00000004 /* refresh */
-#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL	0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

include/configs/csb637.h

@@ -45,33 +45,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
 /* flash */
-#define MC_PUIA_VAL	0x00000000
-#define MC_PUP_VAL	0x00000000
-#define MC_PUER_VAL	0x00000000
-#define MC_ASR_VAL	0x00000000
-#define MC_AASR_VAL	0x00000000
-#define EBI_CFGR_VAL	0x00000000
-#define SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL	0x00000000
+#define CONFIG_SYS_MC_PUP_VAL	0x00000000
+#define CONFIG_SYS_MC_PUER_VAL	0x00000000
+#define CONFIG_SYS_MC_ASR_VAL	0x00000000
+#define CONFIG_SYS_MC_AASR_VAL	0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL	0x2031BE01 /* 184.320000 MHz for PCK */
-#define PLLBR_VAL	0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
-#define MCKR_VAL	0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL	0x2031BE01 /* 184.320000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL	0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL	0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL	0x00000000
-#define PIOC_PDR_VAL	0xFFFF0000
-#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL	0x21914159 /* set up the SDRAM */
-#define SDRAM		0x20000000 /* address of the SDRAM */
-#define SDRAM1		0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1	0x00000004 /* refresh */
-#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL	0x21914159 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

include/configs/m501sk.h

@@ -41,6 +41,39 @@
 #define CONFIG_INITRD_TAG		1
 
 #define CONFIG_MENUPROMPT		"."
+/*
+ * LowLevel Init
+ */
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
+/* flash */
+#define CONFIG_SYS_MC_PUIA_VAL	0x00000000
+#define CONFIG_SYS_MC_PUP_VAL	0x00000000
+#define CONFIG_SYS_MC_PUER_VAL	0x00000000
+#define CONFIG_SYS_MC_ASR_VAL	0x00000000
+#define CONFIG_SYS_MC_AASR_VAL	0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL	0x00003284 /* 16bit, 2 TDF, 4 WS */
+
+/* clocks */
+#define CONFIG_SYS_PLLAR_VAL	0x20263E04 /* 179.712000 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
+#define CONFIG_SYS_MCKR_VAL	0x00000202
+
+/* sdram */
+#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL	0x2188c155 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 
 /*
  * Size of malloc() pool

include/configs/mp2usb.h

@@ -49,33 +49,33 @@
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
 /* flash */
-#define MC_PUIA_VAL	0x00000000
-#define MC_PUP_VAL	0x00000000
-#define MC_PUER_VAL	0x00000000
-#define MC_ASR_VAL	0x00000000
-#define MC_AASR_VAL	0x00000000
-#define EBI_CFGR_VAL	0x00000000
-#define SMC_CSR0_VAL	0x00003084 /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL	0x00000000
+#define CONFIG_SYS_MC_PUP_VAL	0x00000000
+#define CONFIG_SYS_MC_PUER_VAL	0x00000000
+#define CONFIG_SYS_MC_ASR_VAL	0x00000000
+#define CONFIG_SYS_MC_AASR_VAL	0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL	0x00003084 /* 16bit, 2 TDF, 4 WS */
 
 /* clocks */
-#define PLLAR_VAL	0x20263E04 /* 180 MHz for PCK */
-#define PLLBR_VAL	0x1048bE0E /* 48 MHz (divider by 2 for USB) */
-#define MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL	0x20263E04 /* 180 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL	0x1048bE0E /* 48 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */
 
 /* sdram */
-#define PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL	0x00000000
-#define PIOC_PDR_VAL	0xFFFF0000
-#define EBI_CSA_VAL	0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL	0x3211295A /* set up the SDRAM */
-#define SDRAM		0x20000000 /* address of the SDRAM */
-#define SDRAM1		0x20000020 /* address of the SDRAM */
-#define SDRAM_VAL	0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1	0x00000004 /* refresh */
-#define SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL	0x3211295A /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1	0x20000020 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
 #else
 #define CONFIG_SKIP_RELOCATE_UBOOT
 #endif	/* CONFIG_SKIP_LOWLEVEL_INIT */

include/configs/qemu-mips.h

@@ -150,7 +150,7 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /* Address and size of Primary Environment Sector */
 #define CONFIG_ENV_SIZE		0x8000

include/configs/sbc8548.h

@@ -399,25 +399,16 @@
 #define CONFIG_TSEC1_NAME	"eTSEC0"
 #define CONFIG_TSEC2	1
 #define CONFIG_TSEC2_NAME	"eTSEC1"
-#define CONFIG_TSEC3	1
-#define CONFIG_TSEC3_NAME	"eTSEC2"
-#define CONFIG_TSEC4
-#define CONFIG_TSEC4_NAME	"eTSEC3"
 #undef CONFIG_MPC85XX_FEC
 
-#define TSEC1_PHY_ADDR		0
-#define TSEC2_PHY_ADDR		1
-#define TSEC3_PHY_ADDR		2
-#define TSEC4_PHY_ADDR		3
+#define TSEC1_PHY_ADDR		0x19
+#define TSEC2_PHY_ADDR		0x1a
 
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-#define TSEC4_PHYIDX		0
+
 #define TSEC1_FLAGS		TSEC_GIGABIT
 #define TSEC2_FLAGS		TSEC_GIGABIT
-#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
 
 /* Options are: eTSEC[0-3] */
 #define CONFIG_ETHPRIME		"eTSEC0"
@@ -464,6 +455,7 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_CMDLINE_EDITING			/* undef to save memory */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 #define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
@@ -507,10 +499,6 @@
 #define CONFIG_ETHADDR	 02:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR	 02:E0:0C:00:01:FD
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR	 02:E0:0C:00:02:FD
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR	 02:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR	 192.168.0.55

include/configs/sbc8641d.h

@@ -311,18 +311,22 @@
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS		0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BUS
+#define CONFIG_SYS_PCI1_MEM_VIRT	CONFIG_SYS_PCI1_MEM_BUS
 #define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE	0xe2000000
-#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BASE
+#define CONFIG_SYS_PCI1_IO_BUS	0xe2000000
+#define CONFIG_SYS_PCI1_IO_PHYS	CONFIG_SYS_PCI1_IO_BUS
+#define CONFIG_SYS_PCI1_IO_VIRT	CONFIG_SYS_PCI1_IO_BUS
 #define CONFIG_SYS_PCI1_IO_SIZE	0x1000000	/* 16M */
 
-#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BUS
+#define CONFIG_SYS_PCI2_MEM_VIRT	CONFIG_SYS_PCI2_MEM_BUS
 #define CONFIG_SYS_PCI2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE	0xe3000000
-#define CONFIG_SYS_PCI2_IO_PHYS	CONFIG_SYS_PCI2_IO_BASE
+#define CONFIG_SYS_PCI2_IO_BUS	0xe3000000
+#define CONFIG_SYS_PCI2_IO_PHYS	CONFIG_SYS_PCI2_IO_BUS
+#define CONFIG_SYS_PCI2_IO_VIRT	CONFIG_SYS_PCI2_IO_BUS
 #define CONFIG_SYS_PCI2_IO_SIZE	0x1000000	/* 16M */
 
 #if defined(CONFIG_PCI)
@@ -409,10 +413,10 @@
  * 0xa000_0000  512M   PCI-Express 2 Memory
  *	Changed it for operating from 0xd0000000
  */
-#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCI1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
 
 /*
@@ -452,10 +456,10 @@
  * 0xe300_0000  16M    PCI-Express 2 I/0
  *    Note that this is at 0xe0000000
  */
-#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW \
+#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \
 			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCI1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
 /*

include/devices.h

@@ -91,7 +91,9 @@ extern char *stdio_names[MAX_FILES];
  */
 int	device_register (device_t * dev);
 int	devices_init (void);
+#ifdef CONFIG_SYS_DEVICE_DEREGISTER
 int	device_deregister(char *devname);
+#endif
 struct list_head* device_get_list(void);
 device_t* device_get_by_name(char* name);
 device_t* device_clone(device_t *dev);

include/e500.h

@@ -13,6 +13,7 @@ typedef struct
   unsigned long freqProcessor;
   unsigned long freqSystemBus;
   unsigned long freqDDRBus;
+  unsigned long freqLocalBus;
 } MPC85xx_SYS_INFO;
 
 #endif  /* _ASMLANGUAGE */

include/mpc86xx.h

@@ -84,6 +84,7 @@
 typedef struct {
 	unsigned long freqProcessor;
 	unsigned long freqSystemBus;
+	unsigned long freqLocalBus;
 } MPC86xx_SYS_INFO;
 
 #define l1icache_enable	icache_enable

include/pca953x.h

@@ -0,0 +1,39 @@
+/*
+ * Copyright 2008 Extreme Engineering Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PCA953X_H_
+#define __PCA953X_H_
+
+#define PCA953X_IN		0x00
+#define PCA953X_OUT		0x01
+#define PCA953X_POL		0x02
+#define PCA953X_CONF		0x03
+
+#define PCA953X_OUT_LOW		0
+#define PCA953X_OUT_HIGH	1
+#define PCA953X_POL_NORMAL	0
+#define PCA953X_POL_INVERT	1
+#define PCA953X_DIR_OUT		0
+#define PCA953X_DIR_IN		1
+
+int pca953x_set_val(u8 chip, uint mask, uint data);
+int pca953x_set_pol(u8 chip, uint mask, uint data);
+int pca953x_set_dir(u8 chip, uint mask, uint data);
+int pca953x_get_val(u8 chip);
+
+#endif /* __PCA953X_H_ */

lib_blackfin/board.c

@@ -374,13 +374,6 @@ void board_init_r(gd_t * id, ulong dest_addr)
 	mem_malloc_init();
 	malloc_bin_reloc();
 
-#ifdef CONFIG_SPI
-# if ! defined(CONFIG_ENV_IS_IN_EEPROM)
-	spi_init_f();
-# endif
-	spi_init_r();
-#endif
-
 #ifdef CONFIG_CMD_NAND
 	puts("NAND:  ");
 	nand_init();		/* go init the NAND */

lib_ppc/board.c

@@ -75,6 +75,10 @@
 #include <keyboard.h>
 #endif
 
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
+
 #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
 extern int update_flash_size (int flash_size);
 #endif
@@ -694,6 +698,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 */
 	trap_init (dest_addr);
 
+#if defined(CONFIG_ADDR_MAP) && defined(CONFIG_E500)
+	init_addr_map();
+#endif
+
 #if defined(CONFIG_BOARD_EARLY_INIT_R)
 	board_early_init_r ();
 #endif