Prepare v2017.05-rc2

Signed-off-by: Tom Rini <trini@konsulko.com>

.travis.yml

@@ -40,7 +40,7 @@ install:
  - ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
  # prepare buildman environment
  - echo -e "[toolchain]\nroot = /usr" > ~/.buildman
- - echo -e "\n[toolchain-alias]\nblackfin = bfin\nsh = sh4\nopenrisc = or32" >> ~/.buildman
+ - echo -e "\n[toolchain-alias]\nsh = sh4\nopenrisc = or32" >> ~/.buildman
  - cat ~/.buildman
  - virtualenv /tmp/venv
  - . /tmp/venv/bin/activate
@@ -60,7 +60,6 @@ env:
 before_script:
   # install toolchains based on TOOLCHAIN} variable
   - if [[ "${TOOLCHAIN}" == *avr32* ]]; then ./tools/buildman/buildman --fetch-arch avr32 ; fi
-  - if [[ "${TOOLCHAIN}" == *bfin* ]]; then ./tools/buildman/buildman --fetch-arch bfin ; fi
   - if [[ "${TOOLCHAIN}" == *m68k* ]]; then ./tools/buildman/buildman --fetch-arch m68k ; fi
   - if [[ "${TOOLCHAIN}" == *microblaze* ]]; then ./tools/buildman/buildman --fetch-arch microblaze ; fi
   - if [[ "${TOOLCHAIN}" == *mips* ]]; then ./tools/buildman/buildman --fetch-arch mips ; fi
@@ -153,7 +152,7 @@ matrix:
     - env:
         - BUILDMAN="sun7i"
     - env:
-        - BUILDMAN="sun8i"
+        - BUILDMAN="sun8i -x orangepi_pc2"
     - env:
         - BUILDMAN="sun9i"
     - env:

Kconfig

@@ -284,9 +284,9 @@ config SYS_EXTRA_OPTIONS
 	  new boards should not use this option.
 
 config SYS_TEXT_BASE
-	depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
+	depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
 		(M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
-		ARCH_ZYNQ
+		ARCH_ZYNQ || ARCH_KEYSTONE
 	depends on !EFI_APP
 	hex "Text Base"
 	help

MAINTAINERS

@@ -93,10 +93,9 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-imx.git
 F:	arch/arm/cpu/arm1136/mx*/
 F:	arch/arm/cpu/arm926ejs/mx*/
-F:	arch/arm/cpu/arm926ejs/imx/
 F:	arch/arm/cpu/armv7/mx*/
 F:	arch/arm/cpu/armv7/vf610/
-F:	arch/arm/cpu/imx-common/
+F:	arch/arm/imx-common/
 F:	arch/arm/include/asm/arch-imx/
 F:	arch/arm/include/asm/arch-mx*/
 F:	arch/arm/include/asm/arch-vf610/
@@ -174,9 +173,12 @@ F:	arch/arm/include/asm/arch-sti*/
 ARM SUNXI
 M:	Jagan Teki <jagan@openedev.com>
 M:	Maxime Ripard <maxime.ripard@free-electrons.com>
+S:	Maintained
 T:	git git://git.denx.de/u-boot-sunxi.git
 F:	arch/arm/cpu/armv7/sunxi/
 F:	arch/arm/include/asm/arch-sunxi/
+F:	arch/arm/mach-sunxi/
+F:	board/sunxi/
 
 ARM TEGRA
 M:	Tom Warren <twarren@nvidia.com>
@@ -222,12 +224,6 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-avr32.git
 F:	arch/avr32/
 
-BLACKFIN
-M:	Sonic Zhang <sonic.adi@gmail.com>
-S:	Maintained
-T:	git git://git.denx.de/u-boot-blackfin.git
-F:	arch/blackfin/
-
 BUILDMAN
 M:	Simon Glass <sjg@chromium.org>
 S:	Maintained
@@ -314,11 +310,6 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-mmc.git
 F:	drivers/mmc/
 
-OPENRISC
-M:	Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
-S:	Maintained
-F:	arch/openrisc/
-
 PATMAN
 M:	Simon Glass <sjg@chromium.org>
 S:	Maintained
@@ -420,12 +411,6 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-sh.git
 F:	arch/sh/
 
-SPARC
-#M:	Francois Retief <fgretief@spaceteq.co.za>
-S:	Orphaned (Since 2016-02)
-T:	git git://git.denx.de/u-boot-sparc.git
-F:	arch/sparc/
-
 SPI
 M:	Jagan Teki <jagan@openedev.com>
 S:	Maintained

Makefile

@@ -5,7 +5,7 @@
 VERSION = 2017
 PATCHLEVEL = 05
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME =
 
 # *DOCUMENTATION*
@@ -348,7 +348,7 @@ OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 AWK		= awk
 PERL		= perl
-PYTHON		= python
+PYTHON		?= python
 DTC		= dtc
 CHECK		= sparse
 
@@ -805,6 +805,10 @@ ALL-y += $(CONFIG_BUILD_TARGET:"%"=%)
 endif
 
 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
+
+# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
+LDFLAGS_u-boot += $(call ld-option, --no-dynamic-linker)
+
 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
 endif
@@ -1345,13 +1349,17 @@ spl/u-boot-spl: tools prepare \
 spl/sunxi-spl.bin: spl/u-boot-spl
 	@:
 
+spl/sunxi-spl-with-ecc.bin: spl/sunxi-spl.bin
+	@:
+
 spl/u-boot-spl.sfp: spl/u-boot-spl
 	@:
 
 spl/boot.bin: spl/u-boot-spl
 	@:
 
-tpl/u-boot-tpl.bin: tools prepare
+tpl/u-boot-tpl.bin: tools prepare \
+		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),dts/dt.dtb)
 	$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
 
 TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include)

README

@@ -137,7 +137,6 @@ Directory Hierarchy:
   /arc			Files generic to ARC architecture
   /arm			Files generic to ARM architecture
   /avr32		Files generic to AVR32 architecture
-  /blackfin		Files generic to Analog Devices Blackfin architecture
   /m68k			Files generic to m68k architecture
   /microblaze		Files generic to microblaze architecture
   /mips			Files generic to MIPS architecture
@@ -147,7 +146,6 @@ Directory Hierarchy:
   /powerpc		Files generic to PowerPC architecture
   /sandbox		Files generic to HW-independent "sandbox"
   /sh			Files generic to SH architecture
-  /sparc		Files generic to SPARC architecture
   /x86			Files generic to x86 architecture
 /api			Machine/arch independent API for external apps
 /board			Board dependent files
@@ -2869,8 +2867,6 @@ The following options need to be configured:
 
 		CONFIG_AT91SAM9XE
 		enable special bootcounter support on at91sam9xe based boards.
-		CONFIG_BLACKFIN
-		enable special bootcounter support on blackfin based boards.
 		CONFIG_SOC_DA8XX
 		enable special bootcounter support on da850 based boards.
 		CONFIG_BOOTCOUNT_RAM
@@ -5911,11 +5907,6 @@ For PowerPC, the following registers have specific use:
     average for all boards 752 bytes for the whole U-Boot image,
     624 text + 127 data).
 
-On Blackfin, the normal C ABI (except for P3) is followed as documented here:
-	http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface
-
-    ==> U-Boot will use P3 to hold a pointer to the global data
-
 On ARM, the following registers are used:
 
 	R0:	function argument word/integer result

api/api_storage.c

@@ -331,10 +331,14 @@ lbasize_t dev_read_stor(void *cookie, void *buf, lbasize_t len, lbastart_t start
 	if (!dev_stor_is_valid(type, dd))
 		return 0;
 
+#ifdef CONFIG_BLK
+	return blk_dread(dd, start, len, buf);
+#else
 	if ((dd->block_read) == NULL) {
 		debugf("no block_read() for device 0x%08x\n", cookie);
 		return 0;
 	}
 
 	return dd->block_read(dd, start, len, buf);
+#endif	/* defined(CONFIG_BLK) */
 }

arch/Kconfig

@@ -27,10 +27,6 @@ config AVR32
 	bool "AVR32 architecture"
 	select CREATE_ARCH_SYMLINK
 
-config BLACKFIN
-	bool "Blackfin architecture"
-	select ARCH_MISC_INIT
-
 config M68K
 	bool "M68000 architecture"
 	select HAVE_PRIVATE_LIBGCC
@@ -55,9 +51,6 @@ config NIOS2
 	select DM
 	select CPU
 
-config OPENRISC
-	bool "OpenRISC architecture"
-
 config PPC
 	bool "PowerPC architecture"
 	select HAVE_PRIVATE_LIBGCC
@@ -80,10 +73,6 @@ config SH
 	bool "SuperH architecture"
 	select HAVE_PRIVATE_LIBGCC
 
-config SPARC
-	bool "SPARC architecture"
-	select CREATE_ARCH_SYMLINK
-
 config X86
 	bool "x86 architecture"
 	select CREATE_ARCH_SYMLINK
@@ -162,16 +151,13 @@ config SYS_CONFIG_NAME
 source "arch/arc/Kconfig"
 source "arch/arm/Kconfig"
 source "arch/avr32/Kconfig"
-source "arch/blackfin/Kconfig"
 source "arch/m68k/Kconfig"
 source "arch/microblaze/Kconfig"
 source "arch/mips/Kconfig"
 source "arch/nds32/Kconfig"
 source "arch/nios2/Kconfig"
-source "arch/openrisc/Kconfig"
 source "arch/powerpc/Kconfig"
 source "arch/sandbox/Kconfig"
 source "arch/sh/Kconfig"
-source "arch/sparc/Kconfig"
 source "arch/x86/Kconfig"
 source "arch/xtensa/Kconfig"

arch/arc/include/asm/init_helpers.h

@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_ARC_INIT_HELPERS_H
-#define _ASM_ARC_INIT_HELPERS_H
-
-int init_cache_f_r(void);
-
-#endif	/* _ASM_ARC_INIT_HELPERS_H */

arch/arc/include/asm/relocate.h

@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_ARC_RELOCATE_H
-#define _ASM_ARC_RELOCATE_H
-
-#include <common.h>
-
-int copy_uboot_to_ram(void);
-int clear_bss(void);
-int do_elf_reloc_fixups(void);
-
-#endif	/* _ASM_ARC_RELOCATE_H */

arch/arc/lib/cache.c

@@ -59,10 +59,16 @@ static unsigned int __before_slc_op(const int op)
 
 static void __after_slc_op(const int op, unsigned int reg)
 {
-	if (op & OP_FLUSH)	/* flush / flush-n-inv both wait */
+	if (op & OP_FLUSH) {	/* flush / flush-n-inv both wait */
+		/*
+		 * Make sure "busy" bit reports correct status,
+		 * see STAR 9001165532
+		 */
+		read_aux_reg(ARC_AUX_SLC_CTRL);
 		while (read_aux_reg(ARC_AUX_SLC_CTRL) &
 		       DC_CTRL_FLUSH_STATUS)
 			;
+	}
 
 	/* Switch back to default Invalidate mode */
 	if (op == OP_INV)

arch/arc/lib/cpu.c

@@ -28,3 +28,9 @@ int arch_early_init_r(void)
 	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
 	return 0;
 }
+
+/* This is a dummy function on arc */
+int dram_init(void)
+{
+	return 0;
+}

arch/arm/Kconfig

@@ -214,6 +214,10 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
 	  ARM_SOC_BOOT0_HOOK which contains the required assembler
 	  preprocessor code.
 
+config ARM_CORTEX_CPU_IS_UP
+	bool
+	default n
+
 config USE_ARCH_MEMCPY
 	bool "Use an assembly optimized implementation of memcpy"
 	default y
@@ -1238,6 +1242,8 @@ source "arch/arm/cpu/armv8/Kconfig"
 
 source "arch/arm/imx-common/Kconfig"
 
+source "board/aries/m28evk/Kconfig"
+source "board/aries/m53evk/Kconfig"
 source "board/bosch/shc/Kconfig"
 source "board/BuR/brxre1/Kconfig"
 source "board/BuR/brppt1/Kconfig"
@@ -1258,8 +1264,6 @@ source "board/cirrus/edb93xx/Kconfig"
 source "board/compulab/cm_t335/Kconfig"
 source "board/compulab/cm_t43/Kconfig"
 source "board/creative/xfi3/Kconfig"
-source "board/denx/m28evk/Kconfig"
-source "board/denx/m53evk/Kconfig"
 source "board/freescale/ls2080a/Kconfig"
 source "board/freescale/ls2080aqds/Kconfig"
 source "board/freescale/ls2080ardb/Kconfig"

arch/arm/config.mk

@@ -120,7 +120,7 @@ endif
 # limit ourselves to the sections we want in the .bin.
 ifdef CONFIG_ARM64
 OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .data \
-		-j .u_boot_list -j .rela.dyn
+		-j .u_boot_list -j .rela.dyn -j .got -j .got.plt
 else
 OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .hash \
 		-j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn

arch/arm/cpu/arm720t/interrupts.c

@@ -12,12 +12,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_USE_IRQ
-void do_irq (struct pt_regs *pt_regs)
-{
-}
-#endif
-
 #if defined(CONFIG_TEGRA)
 static ulong timestamp;
 static ulong lastdec;

arch/arm/cpu/arm920t/Makefile

@@ -8,7 +8,6 @@
 extra-y	= start.o
 
 obj-y	+= cpu.o
-obj-$(CONFIG_USE_IRQ)	+= interrupts.o
 
 obj-$(CONFIG_EP93XX) += ep93xx/
 obj-$(CONFIG_IMX) += imx/

arch/arm/cpu/arm920t/interrupts.c

@@ -1,27 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/proc-armv/ptrace.h>
-
-#if defined (CONFIG_ARCH_INTEGRATOR)
-void do_irq (struct pt_regs *pt_regs)
-{
-	/* ASSUMED to be a timer interrupt  */
-	/* Just clear it - count handled in */
-	/* integratorap.c                   */
-	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
-}
-#endif

arch/arm/cpu/arm920t/s3c24x0/Makefile

@@ -5,7 +5,6 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_USE_IRQ) += interrupts.o
 obj-$(CONFIG_DISPLAY_CPUINFO)	+= cpu_info.o
 obj-y	+= speed.o
 obj-y	+= timer.o

arch/arm/cpu/arm920t/s3c24x0/interrupts.c

@@ -1,26 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/proc-armv/ptrace.h>
-
-void do_irq (struct pt_regs *pt_regs)
-{
-	struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
-	u_int32_t intpnd = readl(&irq->INTPND);
-
-}

arch/arm/cpu/arm926ejs/armada100/dram.c

@@ -108,7 +108,9 @@ int dram_init(void)
  * If this function is not defined here,
  * board.c alters dram bank zero configuration defined above.
  */
-void dram_init_banksize(void)
+int dram_init_banksize(void)
 {
 	dram_init();
+
+	return 0;
 }

arch/arm/cpu/armv7/ls102xa/psci.S

@@ -37,7 +37,7 @@
 
 	.align	5
 
-#define	ONE_MS		(GENERIC_TIMER_CLK / 1000)
+#define	ONE_MS		(COUNTER_FREQUENCY / 1000)
 #define	RESET_WAIT	(30 * ONE_MS)
 
 .globl	psci_version

arch/arm/cpu/armv7/ls102xa/soc.c

@@ -91,7 +91,7 @@ int arch_soc_init(void)
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif
 
-#ifdef CONFIG_FSL_DCU_FB
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
 	out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
 #endif
 

arch/arm/cpu/armv7/ls102xa/timer.c

@@ -62,7 +62,7 @@ int timer_init(void)
 	/* Enable System Counter */
 	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
 
-	freq = GENERIC_TIMER_CLK;
+	freq = COUNTER_FREQUENCY;
 	asm("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
 
 	/* Set PL1 Physical Timer Ctrl */

arch/arm/cpu/armv7/mx6/Kconfig

@@ -155,6 +155,19 @@ config TARGET_MX6CUBOXI
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 
+config TARGET_MX6LOGICPD
+	bool "Logic PD i.MX6 SOM"
+	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_PMIC
+	select DM_REGULATOR
+	select OF_CONTROL
+
 config TARGET_MX6QARM2
 	bool "mx6qarm2"
 
@@ -172,6 +185,7 @@ config TARGET_MX6Q_ICORE
 
 config TARGET_MX6Q_ICORE_RQS
 	bool "Support Engicam i.Core RQS"
+	select BOARD_LATE_INIT
 	select MX6QDL
 	select OF_CONTROL
 	select DM
@@ -253,6 +267,7 @@ config TARGET_MX6UL_GEAM
 	select SUPPORT_SPL
 config TARGET_MX6UL_ISIOT
 	bool "Support Engicam Is.IoT MX6UL"
+	select BOARD_LATE_INIT
 	select MX6UL
 	select OF_CONTROL
 	select DM
@@ -404,6 +419,7 @@ source "board/gateworks/gw_ventana/Kconfig"
 source "board/kosagi/novena/Kconfig"
 source "board/samtec/vining_2000/Kconfig"
 source "board/liebherr/mccmon6/Kconfig"
+source "board/logicpd/imx6/Kconfig"
 source "board/seco/Kconfig"
 source "board/solidrun/mx6cuboxi/Kconfig"
 source "board/technexion/pico-imx6ul/Kconfig"

arch/arm/cpu/armv7/mx7ulp/scg.c

@@ -504,7 +504,9 @@ u32 decode_pll(enum pll_clocks pll)
 		num = readl(&scg1_regs->spllnum);
 		denom = readl(&scg1_regs->splldenom);
 
-		return (infreq / pre_div) * (mult + num / denom);
+		infreq = infreq / pre_div;
+
+		return infreq * mult + infreq * num / denom;
 
 	case PLL_A7_APLL:
 		reg = readl(&scg1_regs->apllcsr);
@@ -531,7 +533,9 @@ u32 decode_pll(enum pll_clocks pll)
 		num = readl(&scg1_regs->apllnum);
 		denom = readl(&scg1_regs->aplldenom);
 
-		return (infreq / pre_div) * (mult + num / denom);
+		infreq = infreq / pre_div;
+
+		return infreq * mult + infreq * num / denom;
 
 	case PLL_USB:
 		reg = readl(&scg1_regs->upllcsr);

arch/arm/cpu/armv7/nonsec_virt.S

@@ -188,11 +188,11 @@ ENTRY(_nonsec_init)
  * we do this here instead.
  * But first check if we have the generic timer.
  */
-#ifdef CONFIG_TIMER_CLK_FREQ
+#ifdef COUNTER_FREQUENCY
 	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
 	and	r0, r0, #CPUID_ARM_GENTIMER_MASK	@ mask arch timer bits
 	cmp	r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
-	ldreq	r1, =CONFIG_TIMER_CLK_FREQ
+	ldreq	r1, =COUNTER_FREQUENCY
 	mcreq	p15, 0, r1, c14, c0, 0		@ write CNTFRQ
 #endif
 

arch/arm/cpu/armv7/sunxi/psci.c

@@ -46,7 +46,7 @@ static u32 __secure cp15_read_cntp_ctl(void)
 	return val;
 }
 
-#define ONE_MS (CONFIG_TIMER_CLK_FREQ / 1000)
+#define ONE_MS (COUNTER_FREQUENCY / 1000)
 
 static void __secure __mdelay(u32 ms)
 {

arch/arm/cpu/armv7m/Makefile

@@ -6,6 +6,5 @@
 #
 
 extra-y := start.o
-obj-y += cpu.o
-
+obj-y += cpu.o cache.o
 obj-$(CONFIG_SYS_ARCH_TIMER) += systick-timer.o

arch/arm/cpu/armv7m/cache.c

@@ -0,0 +1,336 @@
+/*
+ * (C) Copyright 2017
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/armv7m.h>
+#include <asm/io.h>
+
+/* Cache maintenance operation registers */
+
+#define V7M_CACHE_REG_ICIALLU		((u32 *)(V7M_CACHE_MAINT_BASE + 0x00))
+#define INVAL_ICACHE_POU		0
+#define V7M_CACHE_REG_ICIMVALU		((u32 *)(V7M_CACHE_MAINT_BASE + 0x08))
+#define V7M_CACHE_REG_DCIMVAC		((u32 *)(V7M_CACHE_MAINT_BASE + 0x0C))
+#define V7M_CACHE_REG_DCISW		((u32 *)(V7M_CACHE_MAINT_BASE + 0x10))
+#define V7M_CACHE_REG_DCCMVAU		((u32 *)(V7M_CACHE_MAINT_BASE + 0x14))
+#define V7M_CACHE_REG_DCCMVAC		((u32 *)(V7M_CACHE_MAINT_BASE + 0x18))
+#define V7M_CACHE_REG_DCCSW		((u32 *)(V7M_CACHE_MAINT_BASE + 0x1C))
+#define V7M_CACHE_REG_DCCIMVAC		((u32 *)(V7M_CACHE_MAINT_BASE + 0x20))
+#define V7M_CACHE_REG_DCCISW		((u32 *)(V7M_CACHE_MAINT_BASE + 0x24))
+#define WAYS_SHIFT			30
+#define SETS_SHIFT			5
+
+/* armv7m processor feature registers */
+
+#define V7M_PROC_REG_CLIDR		((u32 *)(V7M_PROC_FTR_BASE + 0x00))
+#define V7M_PROC_REG_CTR		((u32 *)(V7M_PROC_FTR_BASE + 0x04))
+#define V7M_PROC_REG_CCSIDR		((u32 *)(V7M_PROC_FTR_BASE + 0x08))
+#define MASK_NUM_WAYS			GENMASK(12, 3)
+#define MASK_NUM_SETS			GENMASK(27, 13)
+#define CLINE_SIZE_MASK			GENMASK(2, 0)
+#define NUM_WAYS_SHIFT			3
+#define NUM_SETS_SHIFT			13
+#define V7M_PROC_REG_CSSELR		((u32 *)(V7M_PROC_FTR_BASE + 0x0C))
+#define SEL_I_OR_D			BIT(0)
+
+enum cache_type {
+	DCACHE,
+	ICACHE,
+};
+
+/* PoU : Point of Unification, Poc: Point of Coherency */
+enum cache_action {
+	INVALIDATE_POU,		/* i-cache invalidate by address */
+	INVALIDATE_POC,		/* d-cache invalidate by address */
+	INVALIDATE_SET_WAY,	/* d-cache invalidate by sets/ways */
+	FLUSH_POU,		/* d-cache clean by address to the PoU */
+	FLUSH_POC,		/* d-cache clean by address to the PoC */
+	FLUSH_SET_WAY,		/* d-cache clean by sets/ways */
+	FLUSH_INVAL_POC,	/* d-cache clean & invalidate by addr to PoC */
+	FLUSH_INVAL_SET_WAY,	/* d-cache clean & invalidate by set/ways */
+};
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+struct dcache_config {
+	u32 ways;
+	u32 sets;
+};
+
+static void get_cache_ways_sets(struct dcache_config *cache)
+{
+	u32 cache_size_id = readl(V7M_PROC_REG_CCSIDR);
+
+	cache->ways = (cache_size_id & MASK_NUM_WAYS) >> NUM_WAYS_SHIFT;
+	cache->sets = (cache_size_id & MASK_NUM_SETS) >> NUM_SETS_SHIFT;
+}
+
+/*
+ * Return the io register to perform required cache action like clean or clean
+ * & invalidate by sets/ways.
+ */
+static u32 *get_action_reg_set_ways(enum cache_action action)
+{
+	switch (action) {
+	case INVALIDATE_SET_WAY:
+		return V7M_CACHE_REG_DCISW;
+	case FLUSH_SET_WAY:
+		return V7M_CACHE_REG_DCCSW;
+	case FLUSH_INVAL_SET_WAY:
+		return V7M_CACHE_REG_DCCISW;
+	default:
+		break;
+	};
+
+	return NULL;
+}
+
+/*
+ * Return the io register to perform required cache action like clean or clean
+ * & invalidate by adddress or range.
+ */
+static u32 *get_action_reg_range(enum cache_action action)
+{
+	switch (action) {
+	case INVALIDATE_POU:
+		return V7M_CACHE_REG_ICIMVALU;
+	case INVALIDATE_POC:
+		return V7M_CACHE_REG_DCIMVAC;
+	case FLUSH_POU:
+		return V7M_CACHE_REG_DCCMVAU;
+	case FLUSH_POC:
+		return V7M_CACHE_REG_DCCMVAC;
+	case FLUSH_INVAL_POC:
+		return V7M_CACHE_REG_DCCIMVAC;
+	default:
+		break;
+	}
+
+	return NULL;
+}
+
+static u32 get_cline_size(enum cache_type type)
+{
+	u32 size;
+
+	if (type == DCACHE)
+		clrbits_le32(V7M_PROC_REG_CSSELR, BIT(SEL_I_OR_D));
+	else if (type == ICACHE)
+		setbits_le32(V7M_PROC_REG_CSSELR, BIT(SEL_I_OR_D));
+	/* Make sure cache selection is effective for next memory access */
+	dsb();
+
+	size = readl(V7M_PROC_REG_CCSIDR) & CLINE_SIZE_MASK;
+	/* Size enocoded as 2 less than log(no_of_words_in_cache_line) base 2 */
+	size = 1 << (size + 2);
+	debug("cache line size is %d\n", size);
+
+	return size;
+}
+
+/* Perform the action like invalidate/clean on a range of cache addresses */
+static int action_cache_range(enum cache_action action, u32 start_addr,
+			      int64_t size)
+{
+	u32 cline_size;
+	u32 *action_reg;
+	enum cache_type type;
+
+	action_reg = get_action_reg_range(action);
+	if (!action_reg)
+		return -EINVAL;
+	if (action == INVALIDATE_POU)
+		type = ICACHE;
+	else
+		type = DCACHE;
+
+	/* Cache line size is minium size for the cache action */
+	cline_size = get_cline_size(type);
+	/* Align start address to cache line boundary */
+	start_addr &= ~(cline_size - 1);
+	debug("total size for cache action = %llx\n", size);
+	do {
+		writel(start_addr, action_reg);
+		size -= cline_size;
+		start_addr += cline_size;
+	} while (size > cline_size);
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+	debug("cache action on range done\n");
+
+	return 0;
+}
+
+/* Perform the action like invalidate/clean on all cached addresses */
+static int action_dcache_all(enum cache_action action)
+{
+	struct dcache_config cache;
+	u32 *action_reg;
+	int i, j;
+
+	action_reg = get_action_reg_set_ways(action);
+	if (!action_reg)
+		return -EINVAL;
+
+	clrbits_le32(V7M_PROC_REG_CSSELR, BIT(SEL_I_OR_D));
+	/* Make sure cache selection is effective for next memory access */
+	dsb();
+
+	get_cache_ways_sets(&cache);	/* Get number of ways & sets */
+	debug("cache: ways= %d, sets= %d\n", cache.ways + 1, cache.sets + 1);
+	for (i = cache.sets; i >= 0; i--) {
+		for (j = cache.ways; j >= 0; j--) {
+			writel((j << WAYS_SHIFT) | (i << SETS_SHIFT),
+			       action_reg);
+		}
+	}
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+
+	return 0;
+}
+
+void dcache_enable(void)
+{
+	if (dcache_status())	/* return if cache already enabled */
+		return;
+
+	if (action_dcache_all(INVALIDATE_SET_WAY)) {
+		printf("ERR: D-cache not enabled\n");
+		return;
+	}
+
+	setbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_DCACHE));
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+void dcache_disable(void)
+{
+	if (!dcache_status())
+		return;
+
+	/* if dcache is enabled-> dcache disable & then flush */
+	if (action_dcache_all(FLUSH_SET_WAY)) {
+		printf("ERR: D-cache not flushed\n");
+		return;
+	}
+
+	clrbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_DCACHE));
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+int dcache_status(void)
+{
+	return (readl(&V7M_SCB->ccr) & BIT(V7M_CCR_DCACHE)) != 0;
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (action_cache_range(INVALIDATE_POC, start, stop - start)) {
+		printf("ERR: D-cache not invalidated\n");
+		return;
+	}
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	if (action_cache_range(FLUSH_POC, start, stop - start)) {
+		printf("ERR: D-cache not flushed\n");
+		return;
+	}
+}
+#else
+void dcache_enable(void)
+{
+	return;
+}
+
+void dcache_disable(void)
+{
+	return;
+}
+
+int dcache_status(void)
+{
+	return 0;
+}
+#endif
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+
+void invalidate_icache_all(void)
+{
+	writel(INVAL_ICACHE_POU, V7M_CACHE_REG_ICIALLU);
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+void icache_enable(void)
+{
+	if (icache_status())
+		return;
+
+	invalidate_icache_all();
+	setbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_ICACHE));
+
+	/* Make sure cache action is effective for next memory access */
+	dsb();
+	isb();	/* Make sure instruction stream sees it */
+}
+
+int icache_status(void)
+{
+	return (readl(&V7M_SCB->ccr) & BIT(V7M_CCR_ICACHE)) != 0;
+}
+
+void icache_disable(void)
+{
+	if (!icache_status())
+		return;
+
+	isb();	/* flush pipeline */
+	clrbits_le32(&V7M_SCB->ccr, BIT(V7M_CCR_ICACHE));
+	isb();	/* subsequent instructions fetch see cache disable effect */
+}
+#else
+void icache_enable(void)
+{
+	return;
+}
+
+void icache_disable(void)
+{
+	return;
+}
+
+int icache_status(void)
+{
+	return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+	icache_enable();
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+	dcache_enable();
+#endif
+}

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <linux/errno.h>
 #include <asm/system.h>
@@ -663,7 +664,7 @@ phys_size_t get_effective_memsize(void)
 	return ea_size;
 }
 
-void dram_init_banksize(void)
+int dram_init_banksize(void)
 {
 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 	phys_size_t dp_ddr_size;
@@ -772,6 +773,8 @@ void dram_init_banksize(void)
 		}
 	}
 #endif
+
+	return 0;
 }
 
 #if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
@@ -874,7 +877,7 @@ void update_early_mmu_table(void)
 
 __weak int dram_init(void)
 {
-	gd->ram_size = initdram(0);
+	fsl_initdram();
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 	/* This will break-before-make MMU for DDR */
 	update_early_mmu_table();

arch/arm/cpu/armv8/zynqmp/Kconfig

@@ -13,7 +13,7 @@ config SPL_LIBGENERIC_SUPPORT
 	default y
 
 config SPL_MMC_SUPPORT
-	default y
+	default y if MMC_SDHCI_ZYNQ
 
 config SPL_SERIAL_SUPPORT
 	default y

arch/arm/cpu/sa1100/cpu.c

@@ -19,10 +19,6 @@
 #include <asm/system.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_USE_IRQ
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
 static void cache_flush(void);
 
 int cleanup_before_linux (void)

arch/arm/dts/Makefile

@@ -29,17 +29,20 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3036-sdk.dtb \
+	rk3188-radxarock.dtb \
+	rk3288-evb.dtb \
+	rk3288-fennec.dtb \
 	rk3288-firefly.dtb \
+	rk3288-miqi.dtb \
+	rk3288-popmetal.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-tinker.dtb \
 	rk3288-veyron-jerry.dtb \
 	rk3288-veyron-mickey.dtb \
 	rk3288-veyron-minnie.dtb \
-	rk3288-rock2-square.dtb \
-	rk3288-evb.dtb \
-	rk3288-fennec.dtb \
-	rk3288-tinker.dtb \
-	rk3288-popmetal.dtb \
 	rk3328-evb.dtb \
-	rk3399-evb.dtb
+	rk3399-evb.dtb \
+	rk3399-puma.dtb
 dtb-$(CONFIG_ARCH_MESON) += \
 	meson-gxbb-odroidc2.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
@@ -225,6 +228,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
 	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
@@ -298,13 +302,17 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-nanopi-neo.dtb
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb
+dtb-$(CONFIG_MACH_SUN50I_H5) += \
+	sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-pine64-plus.dtb \
 	sun50i-a64-pine64.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
-	sun9i-a80-cubieboard4.dtb
+	sun9i-a80-cubieboard4.dtb \
+	sun9i-a80-cx-a99.dtb
 
 dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
 	vf610-colibri.dtb \
@@ -315,11 +323,13 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
 dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
 
 dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
+	imx6sl-evk.dtb \
 	imx6sll-evk.dtb \
 	imx6dl-icore.dtb \
 	imx6dl-icore-rqs.dtb \
 	imx6q-icore.dtb \
 	imx6q-icore-rqs.dtb \
+	imx6q-logicpd.dtb \
 	imx6sx-sabreauto.dtb \
 	imx6ul-geam-kit.dtb \
 	imx6ul-isiot-emmc.dtb \
@@ -339,6 +349,23 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
 dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \
 	at91-sama5d2_xplained.dtb
 
+dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
+	sama5d31ek.dtb \
+	sama5d33ek.dtb \
+	sama5d34ek.dtb \
+	sama5d35ek.dtb \
+	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
+	at91-sama5d3_xplained.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
+	at91-sama5d4ek.dtb
+
+dtb-$(CONFIG_TARGET_SAMA5D4_XPLAINED) += \
+	at91-sama5d4_xplained.dtb
+
 dtb-$(CONFIG_ARCH_BCM283X) += \
 	bcm2835-rpi-a-plus.dtb \
 	bcm2835-rpi-a.dtb \

arch/arm/dts/at91-sama5d3_xplained.dts

@@ -0,0 +1,348 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				u-boot,dm-pre-reloc;
+				vmmc-supply = <&vcc_3v3_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "disabled";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				pinctrl-0 = <&pinctrl_i2c0_pu>;
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				cs-gpios = <&pioC 25 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				pinctrl-0 = <&pinctrl_i2c2_pu>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_i2c0_pu: i2c0_pu {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_i2c2_pu: i2c2_pu {
+						atmel,pins =
+							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	vcc_mmc0_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};

arch/arm/dts/at91-sama5d4_xplained.dts

@@ -0,0 +1,286 @@
+/*
+ * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Josh Wu <josh.wu@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4 Xplained";
+	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &usart3;
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f8010000 {
+				u-boot,dm-pre-reloc;
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				spi_flash@0 {
+					u-boot,dm-pre-reloc;
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+
+				phy0: ethernet-phy@1 {
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+					reg = <1>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 3 0>;
+				};
+			};
+
+			usart3: serial@fc00c000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_HIGH
+					   &pioE 14 GPIO_ACTIVE_HIGH
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		reg = <0 1>;
+	};
+
+	vcc_mmc1_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
+		reg = <1 1>;
+	};
+};

arch/arm/dts/at91-sama5d4ek.dts

@@ -0,0 +1,341 @@
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &usart3;
+	};
+
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			ssc0: ssc@f8008000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8010000 {
+				u-boot,dm-pre-reloc;
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				spi_flash@0 {
+					u-boot,dm-pre-reloc;
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck2>;
+					clock-names = "mclk";
+				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				atmel_mxt_ts@4c {
+					compatible = "atmel,atmel_mxt_ts";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
+			};
+
+			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			mmc1: mmc@fc000000 {
+				u-boot,dm-pre-reloc;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				u-boot,dm-pre-reloc;
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		d8 {
+			label = "d8";
+			/* PE28, conflicts with usart4 rts pin */
+			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
+		};
+
+		d9 {
+			label = "d9";
+			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		d10 {
+			label = "d10";
+			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D4EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN1L", "Line In Jack",
+			"IN1R", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
+};

arch/arm/dts/axp209.dtsi

@@ -53,6 +53,12 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <1500>;

arch/arm/dts/exynos4210-trats.dts

@@ -23,6 +23,7 @@
 		console = "/serial@13820000";
 		mmc0 = "/sdhci@12510000";
 		mmc2 = "/sdhci@12530000";
+		i2c8 = &i2c_fg;
 	};
 
 	fimd@11c00000 {
@@ -113,6 +114,14 @@
 	dwmmc@12550000 {
 		status = "disabled";
 	};
+
+	i2c_fg: fuel-gauge {
+		compatible = "i2c-gpio";
+		gpios = <&gpy4 1 0>,	/* sda */
+			<&gpy4 0 0>;	/* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		status = "okay";
+	};
 };
 
 &i2c_5 {

arch/arm/dts/exynos4412-odroid.dts

@@ -213,7 +213,7 @@
 
 				buck8_reg: BUCK8 {
 					regulator-name = "VCC_P3V3_2.85V";
-					regulator-min-microvolt = <2850000>;
+					regulator-min-microvolt = <750000>;
 					regulator-max-microvolt = <3300000>;
 				};
 			};

arch/arm/dts/exynos4412-trats2.dts

@@ -27,6 +27,8 @@
 		i2c5 = "/i2c@138b0000";
 		i2c6 = "/i2c@138c0000";
 		i2c7 = "/i2c@138d0000";
+		i2c8 = &i2c_fg;
+		i2c9 = &i2c_max77693;
 		serial0 = "/serial@13800000";
 		console = "/serial@13820000";
 		mmc0 = "/sdhci@12510000";
@@ -34,6 +36,22 @@
 		mshc0 = "/dwmmc@12550000";
 	};
 
+	i2c_fg: fuel-gauge {
+		compatible = "i2c-gpio";
+		gpios = <&gpf1 5 0>,	/* sda */
+			<&gpf1 4 0>;	/* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		status = "okay";
+	};
+
+	i2c_max77693: max77693 {
+		compatible = "i2c-gpio";
+		gpio = <&gpm2 0 0>,	/* sda */
+		       <&gpm2 1 0>;	/* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		status = "okay";
+	};
+
 	i2c@138d0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;

arch/arm/dts/imx6q-logicpd.dts

@@ -0,0 +1,190 @@
+/*
+ * Copyright 2017 Logic PD, Inc.
+ * Based on SabreSD, Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qdl-logicpd.dtsi"
+
+/ {
+	model = "Logic PD i.MX6QDL SOM";
+	compatible = "fsl,imx6q";
+
+	reg_usb_otg_vbus: regulator-otg-vbus@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3v3: regulator-3v3@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "hsic";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-speed = <10>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* nINT */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0 /* Ethernet Reset */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x130b0
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x130b0
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x130b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0	/* USB_H1_PWR_EN */
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x17030
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x13030
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+	fsl,pins = <
+		MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+		MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0	/* USB_OTG_PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+		>;
+	};
+};

arch/arm/dts/imx6qdl-logicpd.dtsi

@@ -0,0 +1,361 @@
+/*
+ * Copyright 2016 Logic PD
+ * This file is adapted from imx6qdl-sabresd.dtsi.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_adj_1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mfg_eeprom: at24@51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;
+		reg = <0x51>;
+	};
+
+	user_eeprom: at24@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL		0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x1b0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x80000000
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x80000000
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x80000000
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23	0x80000000
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x80000000
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x80000000
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x80000000
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x80000000
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x80000000
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x80000000
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x80000000
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x80000000
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x80000000
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04	0x80000000
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x80000000
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x80000000
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x80000000
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x80000000
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x80000000
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x80000000
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05	0x80000000
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06	0x80000000
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07	0x80000000
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x80000000
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x80000000
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x80000000
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x80000000
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12	0x80000000
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13	0x80000000
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14	0x80000000
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15	0x80000000
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16	0x80000000
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x80000000
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x80000000
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x80000000
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x80000000
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x80000000
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x80000000
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28	0x80000000
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29	0x80000000
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x80000000
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x80000000
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00	0x80000000
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x80000000
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x80000000
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x80000000
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x80000000
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x80000000
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x80000000
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x80000000
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x80000000
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x80000000
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07	0x80000000
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08	0x80000000
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x80000000
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x80000000
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20	0x80000000
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x80000000
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x80000000
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x80000000
+			MX6QDL_PAD_RGMII_RD0__GPIO6_IO25	0x80000000
+			MX6QDL_PAD_RGMII_RD1__GPIO6_IO27	0x80000000
+			MX6QDL_PAD_RGMII_RD2__GPIO6_IO28	0x80000000
+			MX6QDL_PAD_RGMII_RD3__GPIO6_IO29	0x80000000
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x80000000
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x80000000
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x1f0b0 /* WL_IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1f0b0 /* WLAN_EN */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1f0b0	/* BT_EN */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 GPIO_ACTIVE_HIGH>;
+	};
+};

arch/arm/dts/imx6sl-evk.dts

@@ -0,0 +1,641 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sl.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloLite EVK Board";
+	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 0>;
+			enable-active-high;
+			vin-supply = <&swbst_reg>;
+		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+
+		reg_lcd_3v3: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-3v3";
+			gpio = <&gpio4 3 0>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 11 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p32", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sl-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
+				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
+				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
+				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
+				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
+				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
+				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+				MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11	0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+			>;
+		};
+
+		pinctrl_fec_sleep: fecgrp-sleep {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__GPIO4_IO23      0x3080
+				MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25   0x3080
+				MX6SL_PAD_FEC_RXD0__GPIO4_IO17     0x3080
+				MX6SL_PAD_FEC_RXD1__GPIO4_IO18     0x3080
+				MX6SL_PAD_FEC_TX_EN__GPIO4_IO22    0x3080
+				MX6SL_PAD_FEC_TXD0__GPIO4_IO24     0x3080
+				MX6SL_PAD_FEC_TXD1__GPIO4_IO16     0x3080
+				MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26  0x3080
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+			>;
+		};
+
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_pwm1: pwmgrp {
+			fsl,pins = <
+				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			>;
+		};
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};

arch/arm/dts/imx6sl.dtsi

@@ -0,0 +1,927 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6sl-pinfunc.h"
+#include <dt-bindings/clock/imx6sl-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 * Also for U-Boot there must be a pre-existing /memory node.
+	 */
+	chosen {};
+	memory { device_type = "memory"; reg = <0 0>; };
+
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
+					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
+					<&clks IMX6SL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+			clocks = <&clks IMX6SL_CLK_OCRAM>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif",
+						"fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+						<&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						"rxtx1", "rxtx2",
+						"rxtx3", "rxtx4",
+						"rxtx5", "rxtx6",
+						"rxtx7", "spba";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI1>,
+						 <&clks IMX6SL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI2>,
+						 <&clks IMX6SL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI3>,
+						 <&clks IMX6SL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_ECSPI4>,
+						 <&clks IMX6SL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart5: serial@02018000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart2: serial@02024000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				ssi1: ssi@02028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
+						 <&clks IMX6SL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 37 1 0>,
+					       <&sdma 38 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi2: ssi@0202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
+						 <&clks IMX6SL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 41 1 0>,
+					       <&sdma 42 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6sl-ssi",
+							"fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
+						 <&clks IMX6SL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					dmas = <&sdma 45 1 0>,
+					       <&sdma 46 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				uart3: serial@02034000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				uart4: serial@02038000 {
+					compatible = "fsl,imx6sl-uart",
+						   "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02038000 0x4000>;
+					interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6SL_CLK_UART>,
+						 <&clks IMX6SL_CLK_UART_SERIAL>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@02080000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM1>,
+					 <&clks IMX6SL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm2: pwm@02084000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM2>,
+					 <&clks IMX6SL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm3: pwm@02088000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM3>,
+					 <&clks IMX6SL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm4: pwm@0208c000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_PWM4>,
+					 <&clks IMX6SL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt: gpt@02098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_GPT>,
+					 <&clks IMX6SL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 22 1>, <&iomuxc  1 20 2>,
+					      <&iomuxc  3 23 1>, <&iomuxc  4 25 1>,
+					      <&iomuxc  5 24 1>, <&iomuxc  6 19 1>,
+					      <&iomuxc  7 36 2>, <&iomuxc  9 44 8>,
+					      <&iomuxc 17 38 6>, <&iomuxc 23 68 4>,
+					      <&iomuxc 27 64 4>, <&iomuxc 31 52 1>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  53 3>, <&iomuxc  3  72 2>,
+					      <&iomuxc  5  34 2>, <&iomuxc  7  57 4>,
+					      <&iomuxc 11  56 1>, <&iomuxc 12  61 3>,
+					      <&iomuxc 15 107 1>, <&iomuxc 16 132 2>,
+					      <&iomuxc 18 135 1>, <&iomuxc 19 134 1>,
+					      <&iomuxc 20 108 2>, <&iomuxc 22 120 1>,
+					      <&iomuxc 23 125 7>, <&iomuxc 30 110 2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 112 8>, <&iomuxc  8 121 4>,
+					      <&iomuxc 12  97 4>, <&iomuxc 16 166 3>,
+					      <&iomuxc 19  85 2>, <&iomuxc 21 137 2>,
+					      <&iomuxc 23 136 1>, <&iomuxc 24  91 1>,
+					      <&iomuxc 25  99 1>, <&iomuxc 26  92 1>,
+					      <&iomuxc 27 100 1>, <&iomuxc 28  93 1>,
+					      <&iomuxc 29 101 1>, <&iomuxc 30  94 1>,
+					      <&iomuxc 31 102 1>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0  95 1>, <&iomuxc  1 103 1>,
+					      <&iomuxc  2  96 1>, <&iomuxc  3 104 1>,
+					      <&iomuxc  4  97 1>, <&iomuxc  5 105 1>,
+					      <&iomuxc  6  98 1>, <&iomuxc  7 106 1>,
+					      <&iomuxc  8  28 1>, <&iomuxc  9  27 1>,
+					      <&iomuxc 10  26 1>, <&iomuxc 11  29 1>,
+					      <&iomuxc 12  32 1>, <&iomuxc 13  31 1>,
+					      <&iomuxc 14  30 1>, <&iomuxc 15  33 1>,
+					      <&iomuxc 16  84 1>, <&iomuxc 17  79 2>,
+					      <&iomuxc 19  78 1>, <&iomuxc 20  76 1>,
+					      <&iomuxc 21  81 2>, <&iomuxc 23  75 1>,
+					      <&iomuxc 24  83 1>, <&iomuxc 25  74 1>,
+					      <&iomuxc 26  77 1>, <&iomuxc 27 159 1>,
+					      <&iomuxc 28 154 1>, <&iomuxc 29 157 1>,
+					      <&iomuxc 30 152 1>, <&iomuxc 31 156 1>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 158 1>, <&iomuxc  1 151 1>,
+					      <&iomuxc  2 155 1>, <&iomuxc  3 153 1>,
+					      <&iomuxc  4 150 1>, <&iomuxc  5 149 1>,
+					      <&iomuxc  6 144 1>, <&iomuxc  7 147 1>,
+					      <&iomuxc  8 142 1>, <&iomuxc  9 146 1>,
+					      <&iomuxc 10 148 1>, <&iomuxc 11 141 1>,
+					      <&iomuxc 12 145 1>, <&iomuxc 13 143 1>,
+					      <&iomuxc 14 140 1>, <&iomuxc 15 139 1>,
+					      <&iomuxc 16 164 2>, <&iomuxc 18 160 1>,
+					      <&iomuxc 19 162 1>, <&iomuxc 20 163 1>,
+					      <&iomuxc 21 161 1>;
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6sl-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6sl-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				regulator-1p1 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1375000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x110>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <4>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1375000>;
+				};
+
+				regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <3150000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+				};
+
+				regulator-2p5 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd2p5";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x130>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2100000>;
+					anatop-max-voltage = <2850000>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_pu: regulator-vddpu {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <9>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <26>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx6q-tempmon";
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBPHY2>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				pu-supply = <&reg_pu>;
+				clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+					 <&clks IMX6SL_CLK_GPU2D_PODF>;
+				#power-domain-cells = <1>;
+			};
+
+			gpr: iomuxc-gpr@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e0000 0x38>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6sl-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			csi: csi@020e4000 {
+				reg = <0x020e4000 0x4000>;
+				interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spdc: spdc@020e8000 {
+				reg = <0x020e8000 0x4000>;
+				interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_SDMA>,
+					 <&clks IMX6SL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				/* imx6sl reuses imx6q sdma firmware */
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@020f0000 {
+				reg = <0x020f0000 0x4000>;
+				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epdc: epdc@020f4000 {
+				reg = <0x020f4000 0x4000>;
+				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			lcdif: lcdif@020f8000 {
+				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SL_CLK_LCDIF_AXI>,
+					 <&clks IMX6SL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbh: usb@02184400 {
+				compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+				fsl,usbmisc = <&usbmisc 2>;
+				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks IMX6SL_CLK_USBOH3>;
+			};
+
+			fec: ethernet@02188000 {
+				compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_ENET>,
+					 <&clks IMX6SL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>,
+					 <&clks IMX6SL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>,
+					 <&clks IMX6SL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>,
+					 <&clks IMX6SL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc4: usdhc@0219c000 {
+				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
+				reg = <0x0219c000 0x4000>;
+				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>,
+					 <&clks IMX6SL_CLK_USDHC4>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			rngb: rngb@021b4000 {
+				reg = <0x021b4000 0x4000>;
+				interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			weim: weim@021b8000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				reg = <0x021b8000 0x4000>;
+				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@021bc000 {
+				compatible = "fsl,imx6sl-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SL_CLK_OCOTP>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/meson-gx.dtsi

@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 16 MiB reserved for Hardware ROM Firmware */
+		hwrom_reserved: hwrom@0 {
+			reg = <0x0 0x0 0x0 0x1000000>;
+			no-map;
+		};
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@10000000 {
+			reg = <0x0 0x10000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x20>;
+				#reset-cells = <1>;
+			};
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84c0 0x0 0x14>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84dc 0x0 0x14>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x8700 0x0 0x14>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		sram: sram@c8000000 {
+			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-shmem@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-shmem@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004c0 0x0 0x14>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004e0 0x0 0x14>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		periphs: periphs@c8834000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8834000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			rng {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
+		};
+
+
+		hiubus: hiubus@c883c000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc883c000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+
+			sd_emmc_a: mmc@70000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x70000 0x0 0x2000>;
+				interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_b: mmc@72000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x72000 0x0 0x2000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
+			sd_emmc_c: mmc@74000 {
+				compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+				reg = <0x0 0x74000 0x0 0x2000>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+		};
+
+		vpu: vpu@d0100000 {
+			compatible = "amlogic,meson-gx-vpu";
+			reg = <0x0 0xd0100000 0x0 0x100000>,
+			      <0x0 0xc883c000 0x0 0x1000>,
+			      <0x0 0xc8838000 0x0 0x1000>;
+			reg-names = "vpu", "hhi", "dmc";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* CVBS VDAC output port */
+			cvbs_vdac_port: port@0 {
+				reg = <0>;
+			};
+		};
+	};
+};

arch/arm/dts/meson-gxbb-odroidc2.dts

@@ -64,6 +64,18 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
+	usb_otg_pwr: regulator-usb-pwrs {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_OTG_PWR";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		blue {
@@ -73,6 +85,60 @@
 			default-state = "off";
 		};
 	};
+
+	tflash_vdd: regulator-tflash_vdd {
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
+		compatible = "regulator-fixed";
+
+		regulator-name = "TFLASH_VDD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tf_io: gpio-regulator-tf_io {
+		compatible = "regulator-gpio";
+
+		regulator-name = "TF_IO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		/*
+		 * signal name from schematics: TF_3V3N_1V8_EN
+		 */
+		gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0
+			  1800000 1>;
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&scpi_clocks {
+	status = "disabled";
 };
 
 &uart_AO {
@@ -83,6 +149,85 @@
 
 &ethmac {
 	status = "okay";
-	pinctrl-0 = <&eth_pins>;
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			reg = <0>;
+			eee-broken-1000t;
+		};
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&tflash_vdd>;
+	vqmmc-supply = <&tf_io>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};

arch/arm/dts/meson-gxbb.dtsi

@@ -40,307 +40,477 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "meson-gx.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
+#include <dt-bindings/clock/gxbb-clkc.h>
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
 
 / {
 	compatible = "amlogic,meson-gxbb";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <0x2>;
-		#size-cells = <0x0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "psci";
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "psci";
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 14
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 11
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
-			     <GIC_PPI 10
-			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
-	};
-
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
 
 	soc {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		cbus: cbus@c1100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc1100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
-
-			reset: reset-controller@4404 {
-				compatible = "amlogic,meson-gxbb-reset";
-				reg = <0x0 0x04404 0x0 0x20>;
-				#reset-cells = <1>;
-			};
-
-			uart_A: serial@84c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-
-			uart_B: serial@84dc {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
-
-			uart_C: serial@8700 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
-				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
+		usb0_phy: phy@c0000000 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000000 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
 		};
 
-		gic: interrupt-controller@c4301000 {
-			compatible = "arm,gic-400";
-			reg = <0x0 0xc4301000 0 0x1000>,
-			      <0x0 0xc4302000 0 0x2000>,
-			      <0x0 0xc4304000 0 0x2000>,
-			      <0x0 0xc4306000 0 0x2000>;
-			interrupt-controller;
-			interrupts = <GIC_PPI 9
-				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
+		usb1_phy: phy@c0000020 {
+			compatible = "amlogic,meson-gxbb-usb2-phy";
+			#phy-cells = <0>;
+			reg = <0x0 0xc0000020 0x0 0x20>;
+			resets = <&reset RESET_USB_OTG>;
+			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+			clock-names = "usb_general", "usb";
+			status = "disabled";
 		};
 
-		aobus: aobus@c8100000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8100000 0x0 0x100000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
-
-			pinctrl_aobus: pinctrl@14 {
-				compatible = "amlogic,meson-gxbb-aobus-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio_ao: bank@14 {
-					reg = <0x0 0x00014 0x0 0x8>,
-					      <0x0 0x0002c 0x0 0x4>,
-					      <0x0 0x00024 0x0 0x8>;
-					reg-names = "mux", "pull", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				uart_ao_a_pins: uart_ao_a {
-					mux {
-						groups = "uart_tx_ao_a", "uart_rx_ao_a";
-						function = "uart_ao";
-					};
-				};
-			};
-
-			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&xtal>;
-				status = "disabled";
-			};
+		usb0: usb@c9000000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9000000 0x0 0x40000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb0_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
+			status = "disabled";
 		};
 
-		periphs: periphs@c8834000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc8834000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
-
-			rng {
-				compatible = "amlogic,meson-rng";
-				reg = <0x0 0x0 0x0 0x4>;
-			};
-
-			pinctrl_periphs: pinctrl@4b0 {
-				compatible = "amlogic,meson-gxbb-periphs-pinctrl";
-				#address-cells = <2>;
-				#size-cells = <2>;
-				ranges;
-
-				gpio: bank@4b0 {
-					reg = <0x0 0x004b0 0x0 0x28>,
-					      <0x0 0x004e8 0x0 0x14>,
-					      <0x0 0x00120 0x0 0x14>,
-					      <0x0 0x00430 0x0 0x40>;
-					reg-names = "mux", "pull", "pull-enable", "gpio";
-					gpio-controller;
-					#gpio-cells = <2>;
-				};
-
-				emmc_pins: emmc {
-					mux {
-						groups = "emmc_nand_d07",
-						       "emmc_cmd",
-						       "emmc_clk";
-						function = "emmc";
-					};
-				};
-
-				sdcard_pins: sdcard {
-					mux {
-						groups = "sdcard_d0",
-						       "sdcard_d1",
-						       "sdcard_d2",
-						       "sdcard_d3",
-						       "sdcard_cmd",
-						       "sdcard_clk";
-						function = "sdcard";
-					};
-				};
-
-				uart_a_pins: uart_a {
-					mux {
-						groups = "uart_tx_a",
-						       "uart_rx_a";
-						function = "uart_a";
-					};
-				};
-
-				uart_b_pins: uart_b {
-					mux {
-						groups = "uart_tx_b",
-						       "uart_rx_b";
-						function = "uart_b";
-					};
-				};
-
-				uart_c_pins: uart_c {
-					mux {
-						groups = "uart_tx_c",
-						       "uart_rx_c";
-						function = "uart_c";
-					};
-				};
-
-				eth_pins: eth_c {
-					mux {
-						groups = "eth_mdio",
-						       "eth_mdc",
-						       "eth_clk_rx_clk",
-						       "eth_rx_dv",
-						       "eth_rxd0",
-						       "eth_rxd1",
-						       "eth_rxd2",
-						       "eth_rxd3",
-						       "eth_rgmii_tx_clk",
-						       "eth_tx_en",
-						       "eth_txd0",
-						       "eth_txd1",
-						       "eth_txd2",
-						       "eth_txd3";
-						function = "eth";
-					};
-				};
-			};
-		};
-
-		hiubus: hiubus@c883c000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xc883c000 0x0 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
-
-			clkc: clock-controller@0 {
-				compatible = "amlogic,gxbb-clkc";
-				#clock-cells = <1>;
-				reg = <0x0 0x0 0x0 0x3db>;
-			};
-		};
-
-		apb: apb@d0000000 {
-			compatible = "simple-bus";
-			reg = <0x0 0xd0000000 0x0 0x200000>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
-		};
-
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000
-			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <0 8 1>;
-			interrupt-names = "macirq";
-			clocks = <&xtal>;
-			clock-names = "stmmaceth";
-			phy-mode = "rgmii";
+		usb1: usb@c9100000 {
+			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
+			reg = <0x0 0xc9100000 0x0 0x40000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+			clock-names = "otg";
+			phys = <&usb1_phy>;
+			phy-names = "usb2-phy";
+			dr_mode = "host";
 			status = "disabled";
 		};
 	};
 };
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_ao {
+			mux {
+				groups = "i2c_sck_ao",
+				       "i2c_sda_ao";
+				function = "i2c_ao";
+			};
+		};
+
+		pwm_ao_a_3_pins: pwm_ao_a_3 {
+			mux {
+				groups = "pwm_ao_a_3";
+				function = "pwm_ao_a_3";
+			};
+		};
+
+		pwm_ao_a_6_pins: pwm_ao_a_6 {
+			mux {
+				groups = "pwm_ao_a_6";
+				function = "pwm_ao_a_6";
+			};
+		};
+
+		pwm_ao_a_12_pins: pwm_ao_a_12 {
+			mux {
+				groups = "pwm_ao_a_12";
+				function = "pwm_ao_a_12";
+			};
+		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+			};
+		};
+	};
+
+	clkc_AO: clock-controller@040 {
+		compatible = "amlogic,gxbb-aoclkc";
+		reg = <0x0 0x00040 0x0 0x4>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwm_ab_AO: pwm@550 {
+		compatible = "amlogic,meson-gxbb-pwm";
+		reg = <0x0 0x0550 0x0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	i2c_AO: i2c@500 {
+		compatible = "amlogic,meson-gxbb-i2c";
+		reg = <0x0 0x500 0x0 0x20>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkc CLKID_AO_I2C>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		emmc_pins: emmc {
+			mux {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd",
+				       "emmc_clk",
+				       "emmc_ds";
+				function = "emmc";
+			};
+		};
+
+		nor_pins: nor {
+			mux {
+				groups = "nor_d",
+				       "nor_q",
+				       "nor_c",
+				       "nor_cs";
+				function = "nor";
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd",
+				       "sdcard_clk";
+				function = "sdcard";
+			};
+		};
+
+		sdio_pins: sdio {
+			mux {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd",
+				       "sdio_clk";
+				function = "sdio";
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+			};
+		};
+
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				       "i2c_sda_a";
+				function = "i2c_a";
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				       "i2c_sda_b";
+				function = "i2c_b";
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				       "i2c_sda_c";
+				function = "i2c_c";
+			};
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1";
+				function = "eth";
+			};
+		};
+
+		pwm_a_x_pins: pwm_a_x {
+			mux {
+				groups = "pwm_a_x";
+				function = "pwm_a_x";
+			};
+		};
+
+		pwm_a_y_pins: pwm_a_y {
+			mux {
+				groups = "pwm_a_y";
+				function = "pwm_a_y";
+			};
+		};
+
+		pwm_b_pins: pwm_b {
+			mux {
+				groups = "pwm_b";
+				function = "pwm_b";
+			};
+		};
+
+		pwm_d_pins: pwm_d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+			};
+		};
+
+		pwm_f_x_pins: pwm_f_x {
+			mux {
+				groups = "pwm_f_x";
+				function = "pwm_f_x";
+			};
+		};
+
+		pwm_f_y_pins: pwm_f_y {
+			mux {
+				groups = "pwm_f_y";
+				function = "pwm_f_y";
+			};
+		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
+	};
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&vpu {
+	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+};

arch/arm/dts/rk3188-radxarock.dts

@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+	compatible = "radxa,rock", "rockchip,rk3188";
+
+	chosen {
+/*		stdout-path = &uart2; */
+		stdout-path = "serial2:115200n8";
+	};
+
+	config {
+		u-boot,dm-pre-reloc;
+		u-boot,boot-led = "rock:red:power";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "rock:green:user1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue {
+			label = "rock:blue:user2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		sleep {
+			label = "rock:red:power";
+			gpios = <&gpio0 15 0>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	ir_recv: gpio-ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 10 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+		0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+		0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+		0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+		0x4 0x0>;
+	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+		0x220 0x40 0x0 0x0>;
+	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
+};
+
+&emac {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+		system-power-controller;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&act8846_dvs0_ctl>;
+
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi: REG6 {
+				regulator-name = "VDD_HDMI";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vcc18: REG7 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_rmii: REG9 {
+				regulator-name = "VCC_RMII";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC18_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28: REG12 {
+				regulator-name = "VCC_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		act8846_dvs0_ctl: act8846-dvs0-ctl {
+			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin {
+			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};

arch/arm/dts/rk3288-firefly.dts

@@ -50,6 +50,11 @@
 			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm1 {
@@ -61,6 +66,11 @@
 	reg-shift = <2>;
 };
 
+&usb_host1 {
+	vbus-supply = <&vcc_host_5v>;
+	status = "okay";
+};
+
 &sdmmc {
 	u-boot,dm-pre-reloc;
 };

arch/arm/dts/rk3288-miqi.dts

@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ X11
+ */
+
+/dts-v1/;
+#include "rk3288-miqi.dtsi"
+
+/ {
+	model = "mqmaker MiQi";
+	compatible = "mqmaker,miqi", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+	reg-shift = <2>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};

arch/arm/dts/rk3288-miqi.dtsi

@@ -0,0 +1,423 @@
+/*
+ * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ X11
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcca_33>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vcc_lan>;
+		gpio30-supply = <&vcc_io>;
+		gpio1830-supply = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc_18>;
+	};
+
+
+	leds {
+		u-boot,dm-pre-reloc;
+		compatible = "gpio-leds";
+
+		work {
+			u-boot,dm-pre-reloc;
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			label = "miqi:green:user";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>;
+		system-power-controller;
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
+	act8846 {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 0 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host1 {
+	vbus-supply = <&vcc_host>;
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};

arch/arm/dts/rk3399-evb.dts

@@ -30,6 +30,13 @@
 		status = "okay";
 	};
 
+	vccsys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vccsys";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -51,6 +58,7 @@
 		regulator-name = "vcc5v0_host";
 		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
 	};
+
 };
 
 &emmc_phy {
@@ -95,6 +103,7 @@
 };
 
 &dwc3_typec0 {
+	rockchip,vbus-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -107,9 +116,41 @@
 };
 
 &dwc3_typec1 {
+	rockchip,vbus-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <100>;
+	u-boot,dm-pre-reloc;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		clock-output-names = "xin32k", "wifibt_32kin";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		reg = <0x1b>;
+		rockchip,system-power-controller;
+		#clock-cells = <1>;
+		u-boot,dm-pre-reloc;
+		status = "okay";
+
+		vcc12-supply = <&vcc3v3_sys>;
+		regulators {
+			vcc33_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc33_lcd";
+			};
+		};
+	};
+};
+
 &pinctrl {
 	pmic {
 		pmic_int_l: pmic-int-l {

arch/arm/dts/rk3399-puma.dts

@@ -0,0 +1,188 @@
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier:     GPL-2.0+	X11
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-sdram-ddr3-1333.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3399-Q7 SoM";
+	compatible = "tsd,puma", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		u-boot,spl-boot-order = &spiflash, &sdhci, &sdmmc;
+	};
+
+	aliases {
+		spi0 = &spi1;
+		spi1 = &spi5;
+	};
+
+	vdd_center: vdd-center {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 25000 0>;
+		regulator-name = "vdd_center";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-init-microvolt = <950000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_host: vcc5v0-host-en {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdmmc {
+        u-boot,dm-pre-reloc;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&dwc3_typec0 {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&dwc3_typec1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pmic_dvs2: pmic-dvs2 {
+			rockchip,pins =
+				<1 18 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&gmac {
+        phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio3 16 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x10>;
+	rx_delay = <0x10>;
+	status = "okay";
+};
+
+&spi1 {
+	u-boot,dm-pre-reloc;
+
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	spiflash: w25q32dw@0 {
+		u-boot,dm-pre-reloc;
+
+		compatible = "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&spi5 {
+	status = "okay";
+};

arch/arm/dts/rk3399.dtsi

@@ -26,6 +26,7 @@
 		serial4 = &uart4;
 		mmc0 = &sdhci;
 		mmc1 = &sdmmc;
+		i2c0 = &i2c0;
 	};
 
 	cpus {
@@ -239,7 +240,6 @@
 		compatible = "rockchip,rk3399-xhci";
 		reg = <0x0 0xfe800000 0x0 0x100000>;
 		status = "disabled";
-		rockchip,vbus-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 		snps,dis-enblslpm-quirk;
 		snps,phyif-utmi-bits = <16>;
 		snps,dis-u2-freeclk-exists-quirk;
@@ -261,7 +261,6 @@
 		compatible = "rockchip,rk3399-xhci";
 		reg = <0x0 0xfe900000 0x0 0x100000>;
 		status = "disabled";
-		rockchip,vbus-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		snps,dis-enblslpm-quirk;
 		snps,phyif-utmi-bits = <16>;
 		snps,dis-u2-freeclk-exists-quirk;
@@ -600,6 +599,25 @@
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+        gmac: eth@fe300000 {
+                compatible = "rockchip,rk3399-gmac";
+                reg = <0x0 0xfe300000 0x0 0x10000>;
+                rockchip,grf = <&grf>;
+                interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
+                interrupt-names = "macirq";
+                clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+                         <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
+                         <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
+                         <&cru PCLK_GMAC>;
+                clock-names = "stmmaceth", "mac_clk_rx",
+                              "mac_clk_tx", "clk_mac_ref",
+                              "clk_mac_refout", "aclk_mac",
+                              "pclk_mac";
+                resets = <&cru SRST_A_GMAC>;
+                reset-names = "stmmaceth";
+                status = "disabled";
+        };
+
 	spdif: spdif@ff870000 {
 		compatible = "rockchip,rk3399-spdif";
 		reg = <0x0 0xff870000 0x0 0x1000>;
@@ -651,6 +669,21 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c@ff3c0000 {
+		compatible = "rockchip,rk3399-i2c";
+		reg = <0x0 0xff3c0000 0x0 0x1000>;
+		assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
+		assigned-clock-rates = <200000000>;
+		clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
+		clock-names = "i2c", "pclk";
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pinctrl: pinctrl {
 		u-boot,dm-pre-reloc;
 		compatible = "rockchip,rk3399-pinctrl";
@@ -865,6 +898,42 @@
 			};
 		};
 
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins =
+					/* mac_txclk */
+					<3 17 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxclk */
+					<3 14 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdio */
+					<3 13 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txen */
+					<3 12 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_clk */
+					<3 11 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxdv */
+					<3 9 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_mdc */
+					<3 8 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd1 */
+					<3 7 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd0 */
+					<3 6 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd1 */
+					<3 5 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd0 */
+					<3 4 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_rxd3 */
+					<3 3 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_rxd2 */
+					<3 2 RK_FUNC_1 &pcfg_pull_none>,
+					/* mac_txd3 */
+					<3 1 RK_FUNC_1 &pcfg_pull_none_13ma>,
+					/* mac_txd2 */
+					<3 0 RK_FUNC_1 &pcfg_pull_none_13ma>;
+			};
+		};
+
 		sdmmc {
 			sdmmc_bus1: sdmmc-bus1 {
 				rockchip,pins =

arch/arm/dts/sama5d31.dtsi

@@ -0,0 +1,16 @@
+/*
+ * sama5d31.dtsi - Device Tree Include file for SAMA5D31 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+};

arch/arm/dts/sama5d31ek.dts

@@ -0,0 +1,56 @@
+/*
+ * sama5d31ek.dts - Device Tree file for SAMA5D31-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D31-EK";
+	compatible = "atmel,sama5d31ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/dts/sama5d33.dtsi

@@ -0,0 +1,14 @@
+/*
+ * sama5d33.dtsi - Device Tree Include file for SAMA5D33 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+
+/ {
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+};

arch/arm/dts/sama5d33ek.dts

@@ -0,0 +1,49 @@
+/*
+ * sama5d33ek.dts - Device Tree file for SAMA5D33-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d33.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D33-EK";
+	compatible = "atmel,sama5d33ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/dts/sama5d34.dtsi

@@ -0,0 +1,16 @@
+/*
+ * sama5d34.dtsi - Device Tree Include file for SAMA5D34 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+
+/ {
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+};

arch/arm/dts/sama5d34ek.dts

@@ -0,0 +1,66 @@
+/*
+ * sama5d34ek.dts - Device Tree file for SAMA5D34-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d34.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D34-EK";
+	compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				24c256@50 {
+					compatible = "24c256";
+					reg = <0x50>;
+					pagesize = <64>;
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/dts/sama5d35.dtsi

@@ -0,0 +1,18 @@
+/*
+ * sama5d35.dtsi - Device Tree Include file for SAMA5D35 SoC
+ *
+ *  Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_uart.dtsi"
+#include "sama5d3_tcb1.dtsi"
+
+/ {
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+};

arch/arm/dts/sama5d35ek.dts

@@ -0,0 +1,59 @@
+/*
+ * sama5d35ek.dts - Device Tree file for SAMA5D35-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d35.dtsi"
+#include "sama5d3xmb.dtsi"
+
+/ {
+	model = "Atmel SAMA5D35-EK";
+	compatible = "atmel,sama5d35ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+};

arch/arm/dts/sama5d36.dtsi

@@ -0,0 +1,20 @@
+/*
+ * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3.dtsi"
+#include "sama5d3_can.dtsi"
+#include "sama5d3_gmac.dtsi"
+#include "sama5d3_emac.dtsi"
+#include "sama5d3_lcd.dtsi"
+#include "sama5d3_mci2.dtsi"
+#include "sama5d3_tcb1.dtsi"
+#include "sama5d3_uart.dtsi"
+
+/ {
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+};

arch/arm/dts/sama5d36ek.dts

@@ -0,0 +1,57 @@
+/*
+ * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Josh Wu <josh.wu@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb.dtsi"
+#include "sama5d3xdm.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/dts/sama5d36ek_cmp.dts

@@ -0,0 +1,55 @@
+/*
+ * sama5d36ek_cmp.dts - Device Tree file for SAMA5D36-EK CMP board
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+#include "sama5d3xmb_cmp.dtsi"
+
+/ {
+	model = "Atmel SAMA5D36-EK";
+	compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@f0008000 {
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		status = "okay";
+	};
+};

arch/arm/dts/sama5d3_can.dtsi

@@ -0,0 +1,74 @@
+/*
+ * sama5d3_can.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * CAN support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PD14 periph C RX, conflicts with SCK0, SPI0_NPCS1 */
+							 AT91_PIOD 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PD15 periph C TX, conflicts with CTS0, SPI0_NPCS2 */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB14 periph B RX, conflicts with GCRS */
+							 AT91_PIOB 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB15 periph B TX, conflicts with GCOL */
+					};
+				};
+
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					can0_clk: can0_clk@40 {
+						#clock-cells = <0>;
+						reg = <40>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					can1_clk: can1_clk@41 {
+						#clock-cells = <0>;
+						reg = <41>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
+			can0: can@f000c000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf000c000 0x300>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&can0_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8010000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8010000 0x300>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&can1_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3_emac.dtsi

@@ -0,0 +1,55 @@
+/*
+ * sama5d3_emac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC0 periph A ETX0, conflicts with TIOA3 */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC1 periph A ETX1, conflicts with TIOB3 */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC2 periph A ERX0, conflicts with TCLK3 */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC3 periph A ERX1, conflicts with TIOA4 */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC4 periph A ETXEN, conflicts with TIOB4 */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 periph A ECRSDV,conflicts with TCLK4 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 periph A ERXER, conflicts with TIOA5 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 periph A EREFCK, conflicts with TIOB5 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 periph A EMDC, conflicts with TCLK5 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC9 periph A EMDIO  */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb1_clk: macb1_clk@35 {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+				};
+			};
+
+			macb1: ethernet@f802c000 {
+				compatible = "cdns,at91sam9260-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3_gmac.dtsi

@@ -0,0 +1,88 @@
+/*
+ * sama5d3_gmac.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * Gigabit Ethernet.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				macb0 {
+					pinctrl_macb0_data_rgmii: macb0_data_rgmii {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A GTX0, conflicts with PWMH0 */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A GTX1, conflicts with PWML0 */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A GTX2, conflicts with TK1 */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A GTX3, conflicts with TF1 */
+							 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A GRX0, conflicts with PWMH1 */
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A GRX1, conflicts with PWML1 */
+							 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A GRX2, conflicts with TD1 */
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A GRX3, conflicts with RK1 */
+					};
+					pinctrl_macb0_data_gmii: macb0_data_gmii {
+						atmel,pins =
+							<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB19 periph B GTX4, conflicts with MCI1_CDA */
+							 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB20 periph B GTX5, conflicts with MCI1_DA0 */
+							 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB21 periph B GTX6, conflicts with MCI1_DA1 */
+							 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB22 periph B GTX7, conflicts with MCI1_DA2 */
+							 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB23 periph B GRX4, conflicts with MCI1_DA3 */
+							 AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB24 periph B GRX5, conflicts with MCI1_CK */
+							 AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB25 periph B GRX6, conflicts with SCK1 */
+							 AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB26 periph B GRX7, conflicts with CTS1 */
+					};
+					pinctrl_macb0_signal_rgmii: macb0_signal_rgmii {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB8 periph A GTXCK, conflicts with PWMH2 */
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A G125CK */
+					};
+					pinctrl_macb0_signal_gmii: macb0_signal_gmii {
+						atmel,pins =
+							<AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A GTXEN, conflicts with PWML2 */
+							 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB10 periph A GTXER, conflicts with RF1 */
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB11 periph A GRXCK, conflicts with RD1 */
+							 AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A GRXDV, conflicts with PWMH3 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A GRXER, conflicts with PWML3 */
+							 AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A GCRS, conflicts with CANRX1 */
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB15 periph A GCOL, conflicts with CANTX1 */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB16 periph A GMDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB17 periph A GMDIO */
+							 AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB27 periph B G125CKO */
+					};
+
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					macb0_clk: macb0_clk@34 {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+				};
+			};
+
+			macb0: ethernet@f0028000 {
+				compatible = "atmel,sama5d3-gem";
+				reg = <0xf0028000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3_lcd.dtsi

@@ -0,0 +1,215 @@
+/*
+ * sama5d3_lcd.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * LCD support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	ahb {
+		apb {
+			hlcdc: hlcdc@f0030000 {
+				compatible = "atmel,sama5d3-hlcdc";
+				reg = <0xf0030000 0x2000>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb444: lcd-rgb-0 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+					};
+
+					pinctrl_lcd_rgb565: lcd-rgb-1 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+					};
+
+					pinctrl_lcd_rgb666: lcd-rgb-2 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb666_alt: lcd-rgb-2-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+
+					pinctrl_lcd_rgb888_alt: lcd-rgb-3-alt {
+						atmel,pins =
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOE 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOE 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					lcdc_clk: lcdc_clk@36 {
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+				};
+
+				systemck {
+					lcdck: lcdck@3 {
+						#clock-cells = <0>;
+						reg = <3>;
+						clocks = <&mck>;
+					};
+				};
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3_mci2.dtsi

@@ -0,0 +1,59 @@
+/*
+ * sama5d3_mci2.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 3 MMC ports
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				mmc2 {
+					pinctrl_mmc2_clk_cmd_dat0: mmc2_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC15 periph A MCI2_CK, conflicts with PCK2 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC10 periph A MCI2_CDA with pullup */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC11 periph A MCI2_DA0 with pullup */
+					};
+					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					mci2_clk: mci2_clk@23 {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+				};
+			};
+
+			mmc2: mmc@f8004000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8004000 0x600>;
+				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(1)>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
+				clocks = <&mci2_clk>;
+				clock-names = "mci_clk";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3_tcb1.dtsi

@@ -0,0 +1,39 @@
+/*
+ * sama5d3_tcb1.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * 2 TC blocks.
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		tcb1 = &tcb1;
+	};
+
+	ahb {
+		apb {
+			pmc: pmc@fffffc00 {
+				periphck {
+					tcb1_clk: tcb1_clk@27 {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+				};
+			};
+
+			tcb1: timer@f8014000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8014000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3_uart.dtsi

@@ -0,0 +1,79 @@
+/*
+ * sama5d3_uart.dtsi - Device Tree Include file for SAMA5D3 SoC with
+ * UART support
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+
+/ {
+	aliases {
+		serial5 = &uart0;
+		serial6 = &uart1;
+	};
+
+	ahb {
+		apb {
+			pinctrl@fffff200 {
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC29 periph A, conflicts with PWMFI2, ISI_D8 */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC30 periph A with pullup, conflicts with ISI_PCK */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PA30 periph B, conflicts with TWD0, ISI_VSYNC */
+							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;	/* PA31 periph B with pullup, conflicts with TWCK0, ISI_HSYNC */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				periphck {
+					uart0_clk: uart0_clk@16 {
+						#clock-cells = <0>;
+						reg = <16>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+
+					uart1_clk: uart1_clk@17 {
+						#clock-cells = <0>;
+						reg = <17>;
+						atmel,clk-output-range = <0 66000000>;
+					};
+				};
+			};
+
+			uart0: serial@f0024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf0024000 0x200>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8028000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8028000 0x200>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3xcm.dtsi

@@ -0,0 +1,123 @@
+/*
+ * sama5d3xcm.dtsi - Device Tree Include file for SAMA5D3x CPU Module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};

arch/arm/dts/sama5d3xcm_cmp.dtsi

@@ -0,0 +1,166 @@
+/*
+ * sama5d3xcm_cmp.dtsi - Device Tree Include file for SAMA5D36 CMP CPU Module
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "disabled";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddana_reg: LDO_REG1 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG2 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+					};
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};

arch/arm/dts/sama5d3xdm.dtsi

@@ -0,0 +1,41 @@
+/*
+ * sama5d3dm.dtsi - Device Tree file for SAMA5 display module
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <31 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pull up deglith */
+					};
+				};
+			};
+		};
+	};
+};

arch/arm/dts/sama5d3xmb.dtsi

@@ -0,0 +1,234 @@
+/*
+ * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+				u-boot,dm-pre-reloc;
+
+				spi_flash@0 {
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+					u-boot,dm-pre-reloc;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				u-boot,dm-pre-reloc;
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				board {
+					u-boot,dm-pre-reloc;
+					pinctrl_mmc0_cd: mmc0_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						u-boot,dm-pre-reloc;
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+					   &pioD 26 GPIO_ACTIVE_LOW
+					   &pioD 27 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+};

arch/arm/dts/sama5d3xmb_cmp.dtsi

@@ -0,0 +1,236 @@
+/*
+ * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board
+ *
+ *  Copyright (C) 2016 Atmel,
+ *
+ * Licensed under GPLv2 or later.
+ */
+#include "sama5d3xcm_cmp.dtsi"
+
+/ {
+	compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		u-boot,dm-pre-reloc;
+		stdout-path = &dbgu;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
+				spi_flash@0 {
+					compatible = "spi-flash";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			ssc0: ssc@f0008000 {
+				atmel,clk-from-rk-pin;
+			};
+
+			/*
+			 * i2c0 conflicts with ISI:
+			 * disable it to allow the use of ISI
+			 * can not enable audio when i2c0 disabled
+			 */
+			i2c0: i2c@f0014000 {
+				wm8904: wm8904@1a {
+					compatible = "wlf,wm8904";
+					reg = <0x1a>;
+					clocks = <&pck0>;
+					clock-names = "mclk";
+				};
+			};
+
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
+			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			isi: isi@f0034000 {
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy0: ethernet-phy@1 {
+					/*interrupt-parent = <&pioE>;*/
+					/*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/
+					reg = <1>;
+				};
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_gpio_keys: gpio_keys {
+						atmel,pins =
+							<AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
+					};
+
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
+					};
+
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
+					};
+				};
+			};
+
+			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ SAMA5D3EK";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "disabled";
+	};
+
+	/* Conflict with LCD pins */
+	gpio_keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};

arch/arm/dts/socfpga_cyclone5_mcvevk.dts

@@ -7,7 +7,7 @@
 #include "socfpga_cyclone5.dtsi"
 
 / {
-	model = "DENX MCVEVK";
+	model = "Aries MCVEVK";
 	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
 
 	chosen {
@@ -54,5 +54,6 @@
 };
 
 &usb1 {
+	disable-over-current;
 	status = "okay";
 };

arch/arm/dts/socfpga_cyclone5_socdk.dts

@@ -54,10 +54,18 @@
 	rxc-skew-ps = <2000>;
 };
 
+&gpio0 {
+	status = "okay";
+};
+
 &gpio1 {
 	status = "okay";
 };
 
+&gpio2 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 

arch/arm/dts/sun50i-h5-orangepi-pc2.dts

@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+/ {
+	model = "OrangePi PC 2";
+	compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+		cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+		cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+	};
+
+	soc {
+		reg_vcc3v3: vcc3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+};
+
+&gic {
+	compatible = "arm,gic-400";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc",
+		     "allwinner,sun5i-a13-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 0>;
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy = <&phy1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};

arch/arm/dts/sun5i-gr8-chip-pro.dts

@@ -0,0 +1,266 @@
+/*
+ * Copyright 2016 Free Electrons
+ * Copyright 2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-gr8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P. Pro";
+	compatible = "nextthing,chip-pro", "nextthing,gr8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "chip-pro:white:status";
+			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mmc0_pwrseq: mmc0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		* The interrupt is routed through the "External Fast
+		* Interrupt Request" pin (ball G13 of the module)
+		* directly to the main interrupt controller, without
+		* any other controller interfering.
+		*/
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "disabled";
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
+	status = "disabled";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc0_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "hw";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_pin_chip_pro: usb0-id-pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>;
+	status = "disabled";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+/*
+ * Both LDO3 and LDO4 are used in parallel to power up the
+ * WiFi/BT chip.
+ */
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-1";
+	regulator-always-on;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-2";
+	regulator-always-on;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	/*
+	 * The CHIP Pro doesn't have a controllable VBUS, nor does it
+	 * have any 5v rail on the board itself.
+	 *
+	 * If one wants to use it as a true OTG port, it should be
+	 * done in the baseboard, and its DT / overlay will add it.
+	 */
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pin_chip_pro>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};

arch/arm/dts/sun8i-h3-nanopi-neo-air.dts

@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Air";
+	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};

arch/arm/dts/sun9i-a80-cx-a99.dts

@@ -0,0 +1,380 @@
+/*
+ * sun9i-a80-cx-a99.dts - Device Tree file for the Sunchip CX-A99 board.
+ *
+ * Copyright (C) 2017 Rask Ingemann Lambertsen <rask@formelder.dk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Sunchip CX-A99 board is found in several similar Android media
+ * players, such as:
+ *
+ * Instabox Fantasy A8 (no external antenna)
+ * Jesurun CS-Q8 (ships with larger remote control)
+ * Jesurun Maxone
+ * Rikomagic (RKM) MK80/MK80LE
+ * Tronsmart Draco AW80 Meta/Telos
+ *
+ * See the Sunchip CX-A99 page on the Linux-sunxi wiki for more information.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sunchip CX-A99";
+	compatible = "sunchip,cx-a99", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>;	/* PG10 */
+			label = "cx-a99:blue:status";
+		};
+
+		red {
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;	/* PG11 */
+			label = "cx-a99:red:status";
+		};
+	};
+
+	powerseq_wifi: powerseq-wifi {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&ac100_rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 0 GPIO_ACTIVE_LOW>;	/* PM0 */
+		post-power-on-delay-ms = <1>;	/* Minimum 2 cycles. */
+	};
+
+	/* USB 2.0 connector closest to the 12 V power connector. */
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 7 /* no flag support */ 0>;	/* PL7 */
+		enable-active-high;
+	};
+
+	/* USB 2.0 connector next to the SD card slot. */
+	reg_usb3_vbus: regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&r_pio 0 8 /* no flag support */ 0>;	/* PL8 */
+		enable-active-high;
+	};
+
+	/*
+	 * OZ80120 voltage regulator for the four Cortex-A15 CPU cores.
+	 * Although the regulator can output 750 - 1200 mV, the permissible
+	 * range for the CPU cores is only 800 - 1100 mV.
+	 */
+	reg_vdd_cpub: regulator-vdd-cpub {
+		compatible = "regulator-gpio";
+
+		regulator-always-on;
+		regulator-min-microvolt = < 800000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-name = "vdd-cpub";
+
+		/* Note: GPIO flags are not supported here . */
+		enable-gpio = <&r_pio 0 2 /* flags n/a */ 0>;	/* PL2 */
+		enable-active-high;
+		gpios = <&r_pio 0 3 /* no flag support */ 0>,	/* PL3 */
+			<&r_pio 0 4 /* no flag support */ 0>,	/* PL4 */
+			<&r_pio 0 5 /* no flag support */ 0>;	/* PL5 */
+
+		gpios-states = <1 0 0>;
+		states = <	 750000 0x7
+				 800000 0x3
+				 850000 0x5
+				 900000 0x1
+				 950000 0x6
+				1000000 0x2
+				1100000 0x4
+				1200000 0x0>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+/*
+ * SD card slot. Although the GPIO pin for card detection is listed as capable
+ * of generating interrupts in the "A80 User Manual", this doesn't work for
+ * some unknown reason, so poll the GPIO for card detection. This is also what
+ * the vendor sys_config.fex file specifies.
+ */
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;	/* PH17 */
+	broken-cd;				/* Poll. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdce>;
+	status = "okay";
+};
+
+/* Ampak AP6335 IEEE 802.11 a/b/g/n/ac Wifi. */
+&mmc1 {
+	bus-width = <4>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_cldo3>;	/* See cldo2,cldo3 note. */
+	vqmmc-supply = <&reg_aldo2>;
+	mmc-pwrseq = <&powerseq_wifi>;
+	status = "okay";
+};
+
+/* On-board eMMC card. */
+&mmc2 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdce>;
+	status = "okay";
+};
+
+&osc32k {
+	clocks = <&ac100_rtc 0>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	ac100: codec@e89 {
+		compatible = "x-powers,ac100";
+		reg = <0xe89>;
+
+		ac100_codec: codec {
+			compatible = "x-powers,ac100-codec";
+			interrupt-parent = <&r_pio>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>;	/* PL9 */
+			#clock-cells = <0>;
+			clock-output-names = "4M_adda";
+		};
+
+		ac100_rtc: rtc {
+			compatible = "x-powers,ac100-rtc";
+			interrupt-parent = <&nmi_intc>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&ac100_codec>;
+			#clock-cells = <1>;
+			clock-output-names = "cko1_rtc",
+					     "cko2_rtc",
+					     "cko3_rtc";
+		};
+	};
+
+	pmic@745 {
+		compatible = "x-powers,axp808", "x-powers,axp806";
+		x-powers,master-mode;
+		reg = <0x745>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		swin-supply = <&reg_dcdce>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v0";
+			};
+
+			/* Supplies pin groups G and M. */
+			reg_aldo2: aldo2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-name = "vddio-wifi-codec";
+			};
+
+			reg_aldo3: aldo3 {
+				regulator-boot-on;
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vddio-gmac";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;	/* Hang if disabled */
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-name = "vdd18-dll-vcc18-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;	/* Hang if disabled */
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpus";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vcc12-hsic";
+			};
+
+			reg_bldo4: bldo4 {
+				regulator-boot-on;
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd09-hdmi";
+			};
+
+			/* Supplies PLx pins which control some regulators. */
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led";
+			};
+
+			/*
+			 * cldo2 and cldo3 are connected in parallel.
+			 * There is currently no way to express that.
+			 * For now, use regulator-always-on on cldo2 and lock
+			 * the voltage on both to 3.3 V.
+			 */
+			reg_cldo2: cldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vbat2-wifi+bt";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vbat1-wifi+bt";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpua";
+			};
+
+			reg_dcdcb: dcdcb {
+				regulator-always-on;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-name = "vcc-dram";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;	/* Hang if disabled. */
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys";
+			};
+
+			/* Supplies pin groups B-F and H. */
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-io-mmc-spdif";
+			};
+
+			reg_sw: sw {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-gmac-codec";
+			};
+		};
+	};
+};
+
+/*
+ * 5-pin connector opposite of the SD card slot:
+ * 1 = GND (pointed to by small triangle), 2 = GND, 3 = 3.3 V, 4 = RX, 5 = TX.
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};

arch/arm/dts/sun9i-a80.dtsi

@@ -701,6 +701,14 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc1_pins: mmc1 {
+				allwinner,pins = "PG0", "PG1" ,"PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",

arch/arm/include/asm/arch-am33xx/cpu.h

@@ -66,29 +66,9 @@
 #define PRM_RSTCTRL_RESET		0x01
 #define PRM_RSTST_WARM_RESET_MASK	0x232
 
-/*
- * Watchdog:
- * Using the prescaler, the OMAP watchdog could go for many
- * months before firing.  These limits work without scaling,
- * with the 60 second default assumed by most tools and docs.
- */
-#define TIMER_MARGIN_MAX	(24 * 60 * 60)	/* 1 day */
-#define TIMER_MARGIN_DEFAULT	60	/* 60 secs */
-#define TIMER_MARGIN_MIN	1
-
-#define PTV			0	/* prescale */
-#define GET_WLDR_VAL(secs)	(0xffffffff - ((secs) * (32768/(1<<PTV))) + 1)
-#define WDT_WWPS_PEND_WCLR	BIT(0)
-#define WDT_WWPS_PEND_WLDR	BIT(2)
-#define WDT_WWPS_PEND_WTGR	BIT(3)
-#define WDT_WWPS_PEND_WSPR	BIT(4)
-
-#define WDT_WCLR_PRE		BIT(5)
-#define WDT_WCLR_PTV_OFF	2
-
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
-
+#include <asm/ti-common/omap_wdt.h>
 
 #ifndef CONFIG_AM43XX
 /* Encapsulating core pll registers */
@@ -422,32 +402,6 @@ struct cm_rtc {
 	unsigned int clkstctrl;		/* offset 0x4 */
 };
 
-/* Watchdog timer registers */
-struct wd_timer {
-	unsigned int resv1[4];
-	unsigned int wdtwdsc;	/* offset 0x010 */
-	unsigned int wdtwdst;	/* offset 0x014 */
-	unsigned int wdtwisr;	/* offset 0x018 */
-	unsigned int wdtwier;	/* offset 0x01C */
-	unsigned int wdtwwer;	/* offset 0x020 */
-	unsigned int wdtwclr;	/* offset 0x024 */
-	unsigned int wdtwcrr;	/* offset 0x028 */
-	unsigned int wdtwldr;	/* offset 0x02C */
-	unsigned int wdtwtgr;	/* offset 0x030 */
-	unsigned int wdtwwps;	/* offset 0x034 */
-	unsigned int resv2[3];
-	unsigned int wdtwdly;	/* offset 0x044 */
-	unsigned int wdtwspr;	/* offset 0x048 */
-	unsigned int resv3[1];
-	unsigned int wdtwqeoi;	/* offset 0x050 */
-	unsigned int wdtwqstar;	/* offset 0x054 */
-	unsigned int wdtwqsta;	/* offset 0x058 */
-	unsigned int wdtwqens;	/* offset 0x05C */
-	unsigned int wdtwqenc;	/* offset 0x060 */
-	unsigned int resv4[39];
-	unsigned int wdt_unfr;	/* offset 0x100 */
-};
-
 /* Timer 32 bit registers */
 struct gptimer {
 	unsigned int tidr;		/* offset 0x00 */

arch/arm/include/asm/arch-meson/sd_emmc.h

@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2016 Carlo Caione <carlo@caione.org>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __SD_EMMC_H__
+#define __SD_EMMC_H__
+
+#include <mmc.h>
+
+#define SDIO_PORT_A			0
+#define SDIO_PORT_B			1
+#define SDIO_PORT_C			2
+
+#define SD_EMMC_CLKSRC_24M		24000000	/* 24 MHz */
+#define SD_EMMC_CLKSRC_DIV2		1000000000	/* 1 GHz */
+
+#define MESON_SD_EMMC_CLOCK		0x00
+#define   CLK_MAX_DIV			63
+#define   CLK_SRC_24M			(0 << 6)
+#define   CLK_SRC_DIV2			(1 << 6)
+#define   CLK_CO_PHASE_000		(0 << 8)
+#define   CLK_CO_PHASE_090		(1 << 8)
+#define   CLK_CO_PHASE_180		(2 << 8)
+#define   CLK_CO_PHASE_270		(3 << 8)
+#define   CLK_TX_PHASE_000		(0 << 10)
+#define   CLK_TX_PHASE_090		(1 << 10)
+#define   CLK_TX_PHASE_180		(2 << 10)
+#define   CLK_TX_PHASE_270		(3 << 10)
+#define   CLK_ALWAYS_ON			BIT(24)
+
+#define MESON_SD_EMMC_CFG		0x44
+#define   CFG_BUS_WIDTH_MASK		GENMASK(1, 0)
+#define   CFG_BUS_WIDTH_1		0
+#define   CFG_BUS_WIDTH_4		1
+#define   CFG_BUS_WIDTH_8		2
+#define   CFG_BL_LEN_MASK		GENMASK(7, 4)
+#define   CFG_BL_LEN_SHIFT		4
+#define   CFG_BL_LEN_512		(9 << 4)
+#define   CFG_RESP_TIMEOUT_MASK		GENMASK(11, 8)
+#define   CFG_RESP_TIMEOUT_256		(8 << 8)
+#define   CFG_RC_CC_MASK		GENMASK(15, 12)
+#define   CFG_RC_CC_16			(4 << 12)
+#define   CFG_SDCLK_ALWAYS_ON		BIT(18)
+#define   CFG_AUTO_CLK			BIT(23)
+
+#define MESON_SD_EMMC_STATUS		0x48
+#define   STATUS_MASK			GENMASK(15, 0)
+#define   STATUS_ERR_MASK		GENMASK(12, 0)
+#define   STATUS_RXD_ERR_MASK		GENMASK(7, 0)
+#define   STATUS_TXD_ERR		BIT(8)
+#define   STATUS_DESC_ERR		BIT(9)
+#define   STATUS_RESP_ERR		BIT(10)
+#define   STATUS_RESP_TIMEOUT		BIT(11)
+#define   STATUS_DESC_TIMEOUT		BIT(12)
+#define   STATUS_END_OF_CHAIN		BIT(13)
+
+#define MESON_SD_EMMC_IRQ_EN		0x4c
+
+#define MESON_SD_EMMC_CMD_CFG		0x50
+#define   CMD_CFG_LENGTH_MASK		GENMASK(8, 0)
+#define   CMD_CFG_BLOCK_MODE		BIT(9)
+#define   CMD_CFG_R1B			BIT(10)
+#define   CMD_CFG_END_OF_CHAIN		BIT(11)
+#define   CMD_CFG_TIMEOUT_4S		(12 << 12)
+#define   CMD_CFG_NO_RESP		BIT(16)
+#define   CMD_CFG_DATA_IO		BIT(18)
+#define   CMD_CFG_DATA_WR		BIT(19)
+#define   CMD_CFG_RESP_NOCRC		BIT(20)
+#define   CMD_CFG_RESP_128		BIT(21)
+#define   CMD_CFG_CMD_INDEX_SHIFT	24
+#define   CMD_CFG_OWNER			BIT(31)
+
+#define MESON_SD_EMMC_CMD_ARG		0x54
+#define MESON_SD_EMMC_CMD_DAT		0x58
+#define MESON_SD_EMMC_CMD_RSP		0x5c
+#define MESON_SD_EMMC_CMD_RSP1		0x60
+#define MESON_SD_EMMC_CMD_RSP2		0x64
+#define MESON_SD_EMMC_CMD_RSP3		0x68
+
+struct meson_mmc_platdata {
+	struct mmc_config cfg;
+	struct mmc mmc;
+	void *regbase;
+	void *w_buf;
+};
+
+#endif

arch/arm/include/asm/arch-omap5/cpu.h

@@ -18,6 +18,8 @@
 
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
+#include <asm/ti-common/omap_wdt.h>
+
 struct gptimer {
 	u32 tidr;		/* 0x00 r */
 	u8 res1[0xc];
@@ -44,6 +46,7 @@ struct gptimer {
 /* enable sys_clk NO-prescale /1 */
 #define GPT_EN			((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
 
+#define WDT_BASE                (OMAP54XX_L4_WKUP_BASE + 0x14000)
 /* Watchdog */
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__

arch/arm/include/asm/arch-rockchip/boot0.h

@@ -0,0 +1,18 @@
+/*
+ * Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Execution starts on the instruction following this 4-byte header
+ * (containing the magic 'RK33').
+ *
+ * To make life easier for everyone, we build the SPL binary with
+ * space for this 4-byte header already included in the binary.
+ */
+
+#ifdef CONFIG_SPL_BUILD
+	.space 0x4         /* space for the 'RK33' */
+#endif
+	b reset

arch/arm/include/asm/arch-rockchip/cru_rk3188.h

@@ -9,6 +9,7 @@
 #define OSC_HZ		(24 * 1000 * 1000)
 
 #define APLL_HZ		(1608 * 1000000)
+#define APLL_SAFE_HZ	(600 * 1000000)
 #define GPLL_HZ		(594 * 1000000)
 #define CPLL_HZ		(384 * 1000000)
 

arch/arm/include/asm/arch-rockchip/grf_rk3288.h

@@ -720,20 +720,20 @@ enum {
 
 /* GRF_SOC_CON1 */
 enum {
-	RMII_MODE_SHIFT = 0xe,
-	RMII_MODE_MASK = 1,
-	RMII_MODE = 1,
+	RK3288_RMII_MODE_SHIFT = 14,
+	RK3288_RMII_MODE_MASK  = (1 << RK3288_RMII_MODE_SHIFT),
+	RK3288_RMII_MODE       = (1 << RK3288_RMII_MODE_SHIFT),
 
-	GMAC_CLK_SEL_SHIFT	= 0xc,
-	GMAC_CLK_SEL_MASK	= 3,
-	GMAC_CLK_SEL_125M	= 0,
-	GMAC_CLK_SEL_25M	= 0x3,
-	GMAC_CLK_SEL_2_5M	= 0x2,
+	RK3288_GMAC_CLK_SEL_SHIFT = 12,
+	RK3288_GMAC_CLK_SEL_MASK  = (3 << RK3288_GMAC_CLK_SEL_SHIFT),
+	RK3288_GMAC_CLK_SEL_125M  = (0 << RK3288_GMAC_CLK_SEL_SHIFT),
+	RK3288_GMAC_CLK_SEL_25M   = (3 << RK3288_GMAC_CLK_SEL_SHIFT),
+	RK3288_GMAC_CLK_SEL_2_5M  = (2 << RK3288_GMAC_CLK_SEL_SHIFT),
 
-	RMII_CLK_SEL_SHIFT	= 0xb,
-	RMII_CLK_SEL_MASK	= 1,
-	RMII_CLK_SEL_2_5M	= 0,
-	RMII_CLK_SEL_25M,
+	RK3288_RMII_CLK_SEL_SHIFT = 11,
+	RK3288_RMII_CLK_SEL_MASK  = (1 << RK3288_RMII_CLK_SEL_SHIFT),
+	RK3288_RMII_CLK_SEL_2_5M  = (0 << RK3288_RMII_CLK_SEL_SHIFT),
+	RK3288_RMII_CLK_SEL_25M   = (1 << RK3288_RMII_CLK_SEL_SHIFT),
 
 	GMAC_SPEED_SHIFT	= 0xa,
 	GMAC_SPEED_MASK		= 1,
@@ -743,10 +743,10 @@ enum {
 	GMAC_FLOWCTRL_SHIFT	= 0x9,
 	GMAC_FLOWCTRL_MASK	= 1,
 
-	GMAC_PHY_INTF_SEL_SHIFT	= 0x6,
-	GMAC_PHY_INTF_SEL_MASK	= 0x7,
-	GMAC_PHY_INTF_SEL_RGMII	= 0x1,
-	GMAC_PHY_INTF_SEL_RMII	= 0x4,
+	RK3288_GMAC_PHY_INTF_SEL_SHIFT = 6,
+	RK3288_GMAC_PHY_INTF_SEL_MASK  = (7 << RK3288_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3288_GMAC_PHY_INTF_SEL_RGMII = (1 << RK3288_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3288_GMAC_PHY_INTF_SEL_RMII  = (4 << RK3288_GMAC_PHY_INTF_SEL_SHIFT),
 
 	HOST_REMAP_SHIFT	= 0x5,
 	HOST_REMAP_MASK		= 1
@@ -801,21 +801,27 @@ enum {
 
 /* GRF_SOC_CON3 */
 enum {
-	RXCLK_DLY_ENA_GMAC_SHIFT	= 0xf,
-	RXCLK_DLY_ENA_GMAC_MASK		= 1,
-	RXCLK_DLY_ENA_GMAC_DISABLE	= 0,
-	RXCLK_DLY_ENA_GMAC_ENABLE,
+	RK3288_RXCLK_DLY_ENA_GMAC_SHIFT = 0xf,
+	RK3288_RXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3288_RXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3288_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3288_RXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3288_RXCLK_DLY_ENA_GMAC_SHIFT),
 
-	TXCLK_DLY_ENA_GMAC_SHIFT	= 0xe,
-	TXCLK_DLY_ENA_GMAC_MASK		= 1,
-	TXCLK_DLY_ENA_GMAC_DISABLE	= 0,
-	TXCLK_DLY_ENA_GMAC_ENABLE,
+	RK3288_TXCLK_DLY_ENA_GMAC_SHIFT = 0xe,
+	RK3288_TXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3288_TXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3288_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3288_TXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3288_RXCLK_DLY_ENA_GMAC_SHIFT),
 
-	CLK_RX_DL_CFG_GMAC_SHIFT	= 0x7,
-	CLK_RX_DL_CFG_GMAC_MASK		= 0x7f,
+	RK3288_CLK_RX_DL_CFG_GMAC_SHIFT = 0x7,
+	RK3288_CLK_RX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3288_CLK_RX_DL_CFG_GMAC_SHIFT),
 
-	CLK_TX_DL_CFG_GMAC_SHIFT	= 0x0,
-	CLK_TX_DL_CFG_GMAC_MASK		= 0x7f,
+	RK3288_CLK_TX_DL_CFG_GMAC_SHIFT = 0x0,
+	RK3288_CLK_TX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3288_CLK_TX_DL_CFG_GMAC_SHIFT),
 };
 
 #endif

arch/arm/include/asm/arch-rockchip/grf_rk3399.h

@@ -144,7 +144,9 @@ struct rk3399_grf_regs {
 	};
 	u32 gpio4d_iomux;
 	u32 reserved21[4];
-	u32 gpio2_p[3][4];
+	u32 gpio2_p[4];
+	u32 gpio3_p[4];
+	u32 gpio4_p[4];
 	u32 reserved22[4];
 	u32 gpio2_sr[3][4];
 	u32 reserved23[4];
@@ -215,7 +217,9 @@ struct rk3399_pmugrf_regs {
 	};
 	u32 gpio1d_iomux;
 	u32 reserved1[8];
-	u32 gpio0_p[2][4];
+	u32 gpio0_p[2];
+	u32 reserved2[2];
+	u32 gpio1_p[4];
 	u32 reserved3[8];
 	u32 gpio0a_e;
 	u32 reserved4;
@@ -333,24 +337,69 @@ enum {
 	GRF_GPIO2B4_SEL_MASK	= 3 << GRF_GPIO2B4_SEL_SHIFT,
 	GRF_SPI2TPM_CSN0	= 1,
 
+	/* GRF_GPIO2C_IOMUX */
+	GRF_GPIO2C0_SEL_SHIFT   = 0,
+	GRF_GPIO2C0_SEL_MASK    = 3 << GRF_GPIO2C0_SEL_SHIFT,
+	GRF_UART0BT_SIN         = 1,
+	GRF_GPIO2C1_SEL_SHIFT   = 2,
+	GRF_GPIO2C1_SEL_MASK    = 3 << GRF_GPIO2C1_SEL_SHIFT,
+	GRF_UART0BT_SOUT        = 1,
+
 	/* GRF_GPIO3A_IOMUX */
+	GRF_GPIO3A0_SEL_SHIFT   = 0,
+	GRF_GPIO3A0_SEL_MASK    = 3 << GRF_GPIO3A0_SEL_SHIFT,
+	GRF_MAC_TXD2            = 1,
+	GRF_GPIO3A1_SEL_SHIFT   = 2,
+	GRF_GPIO3A1_SEL_MASK    = 3 << GRF_GPIO3A1_SEL_SHIFT,
+	GRF_MAC_TXD3            = 1,
+	GRF_GPIO3A2_SEL_SHIFT   = 4,
+	GRF_GPIO3A2_SEL_MASK    = 3 << GRF_GPIO3A2_SEL_SHIFT,
+	GRF_MAC_RXD2            = 1,
+	GRF_GPIO3A3_SEL_SHIFT   = 6,
+	GRF_GPIO3A3_SEL_MASK    = 3 << GRF_GPIO3A3_SEL_SHIFT,
+	GRF_MAC_RXD3            = 1,
 	GRF_GPIO3A4_SEL_SHIFT	= 8,
 	GRF_GPIO3A4_SEL_MASK	= 3 << GRF_GPIO3A4_SEL_SHIFT,
+	GRF_MAC_TXD0            = 1,
 	GRF_SPI0NORCODEC_RXD	= 2,
 	GRF_GPIO3A5_SEL_SHIFT	= 10,
 	GRF_GPIO3A5_SEL_MASK	= 3 << GRF_GPIO3A5_SEL_SHIFT,
+	GRF_MAC_TXD1            = 1,
 	GRF_SPI0NORCODEC_TXD	= 2,
 	GRF_GPIO3A6_SEL_SHIFT	= 12,
 	GRF_GPIO3A6_SEL_MASK	= 3 << GRF_GPIO3A6_SEL_SHIFT,
+	GRF_MAC_RXD0            = 1,
 	GRF_SPI0NORCODEC_CLK	= 2,
 	GRF_GPIO3A7_SEL_SHIFT	= 14,
 	GRF_GPIO3A7_SEL_MASK	= 3 << GRF_GPIO3A7_SEL_SHIFT,
+	GRF_MAC_RXD1            = 1,
 	GRF_SPI0NORCODEC_CSN0	= 2,
 
 	/* GRF_GPIO3B_IOMUX */
 	GRF_GPIO3B0_SEL_SHIFT	= 0,
 	GRF_GPIO3B0_SEL_MASK	= 3 << GRF_GPIO3B0_SEL_SHIFT,
+	GRF_MAC_MDC             = 1,
 	GRF_SPI0NORCODEC_CSN1	= 2,
+	GRF_GPIO3B1_SEL_SHIFT	= 2,
+	GRF_GPIO3B1_SEL_MASK	= 3 << GRF_GPIO3B1_SEL_SHIFT,
+	GRF_MAC_RXDV            = 1,
+	GRF_GPIO3B3_SEL_SHIFT	= 6,
+	GRF_GPIO3B3_SEL_MASK	= 3 << GRF_GPIO3B3_SEL_SHIFT,
+	GRF_MAC_CLK             = 1,
+	GRF_GPIO3B4_SEL_SHIFT	= 8,
+	GRF_GPIO3B4_SEL_MASK	= 3 << GRF_GPIO3B4_SEL_SHIFT,
+	GRF_MAC_TXEN            = 1,
+	GRF_GPIO3B5_SEL_SHIFT	= 10,
+	GRF_GPIO3B5_SEL_MASK	= 3 << GRF_GPIO3B5_SEL_SHIFT,
+	GRF_MAC_MDIO            = 1,
+	GRF_GPIO3B6_SEL_SHIFT   = 12,
+	GRF_GPIO3B6_SEL_MASK    = 3 << GRF_GPIO3B6_SEL_SHIFT,
+	GRF_MAC_RXCLK           = 1,
+
+	/* GRF_GPIO3C_IOMUX */
+	GRF_GPIO3C1_SEL_SHIFT	= 2,
+	GRF_GPIO3C1_SEL_MASK	= 3 << GRF_GPIO3C1_SEL_SHIFT,
+	GRF_MAC_TXCLK           = 1,
 
 	/* GRF_GPIO4B_IOMUX */
 	GRF_GPIO4B0_SEL_SHIFT	= 0,
@@ -436,4 +485,43 @@ enum {
 
 };
 
+/* GRF_SOC_CON5 */
+enum {
+	RK3399_GMAC_PHY_INTF_SEL_SHIFT = 9,
+	RK3399_GMAC_PHY_INTF_SEL_MASK  = (7 << RK3399_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3399_GMAC_PHY_INTF_SEL_RGMII = (1 << RK3399_GMAC_PHY_INTF_SEL_SHIFT),
+	RK3399_GMAC_PHY_INTF_SEL_RMII  = (4 << RK3399_GMAC_PHY_INTF_SEL_SHIFT),
+
+	RK3399_GMAC_CLK_SEL_SHIFT = 4,
+	RK3399_GMAC_CLK_SEL_MASK  = (3 << RK3399_GMAC_CLK_SEL_SHIFT),
+	RK3399_GMAC_CLK_SEL_125M  = (0 << RK3399_GMAC_CLK_SEL_SHIFT),
+	RK3399_GMAC_CLK_SEL_25M	  = (3 << RK3399_GMAC_CLK_SEL_SHIFT),
+	RK3399_GMAC_CLK_SEL_2_5M  = (2 << RK3399_GMAC_CLK_SEL_SHIFT),
+};
+
+/* GRF_SOC_CON6 */
+enum {
+	RK3399_RXCLK_DLY_ENA_GMAC_SHIFT = 15,
+	RK3399_RXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3399_RXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3399_RXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3399_RXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3399_RXCLK_DLY_ENA_GMAC_SHIFT),
+
+	RK3399_TXCLK_DLY_ENA_GMAC_SHIFT	= 7,
+	RK3399_TXCLK_DLY_ENA_GMAC_MASK =
+		(1 << RK3399_TXCLK_DLY_ENA_GMAC_SHIFT),
+	RK3399_TXCLK_DLY_ENA_GMAC_DISABLE = 0,
+	RK3399_TXCLK_DLY_ENA_GMAC_ENABLE =
+		(1 << RK3399_TXCLK_DLY_ENA_GMAC_SHIFT),
+
+	RK3399_CLK_RX_DL_CFG_GMAC_SHIFT = 8,
+	RK3399_CLK_RX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3399_CLK_RX_DL_CFG_GMAC_SHIFT),
+
+	RK3399_CLK_TX_DL_CFG_GMAC_SHIFT = 0,
+	RK3399_CLK_TX_DL_CFG_GMAC_MASK =
+		(0x7f << RK3399_CLK_TX_DL_CFG_GMAC_SHIFT),
+};
+
 #endif	/* __SOC_ROCKCHIP_RK3399_GRF_H__ */

arch/arm/include/asm/arch-rockchip/hdmi_rk3288.h

@@ -1,456 +0,0 @@
-/*
- * Copyright (c) 2015 Google, Inc
- * Copyright 2014 Rockchip Inc.
- * Copyright (C) 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_ARCH_HDMI_H
-#define _ASM_ARCH_HDMI_H
-
-
-#define HDMI_EDID_BLOCK_SIZE            128
-
-struct rk3288_hdmi {
-	u32 reserved0[0x100];
-	u32 ih_fc_stat0;
-	u32 ih_fc_stat1;
-	u32 ih_fc_stat2;
-	u32 ih_as_stat0;
-	u32 ih_phy_stat0;
-	u32 ih_i2cm_stat0;
-	u32 ih_cec_stat0;
-	u32 ih_vp_stat0;
-	u32 ih_i2cmphy_stat0;
-	u32 ih_ahbdmaaud_stat0;
-	u32 reserved1[0x17f-0x109];
-	u32 ih_mute_fc_stat0;
-	u32 ih_mute_fc_stat1;
-	u32 ih_mute_fc_stat2;
-	u32 ih_mute_as_stat0;
-	u32 ih_mute_phy_stat0;
-	u32 ih_mute_i2cm_stat0;
-	u32 ih_mute_cec_stat0;
-	u32 ih_mute_vp_stat0;
-	u32 ih_mute_i2cmphy_stat0;
-	u32 ih_mute_ahbdmaaud_stat0;
-	u32 reserved2[0x1fe - 0x189];
-	u32 ih_mute;
-	u32 tx_invid0;
-	u32 tx_instuffing;
-	u32 tx_gydata0;
-	u32 tx_gydata1;
-	u32 tx_rcrdata0;
-	u32 tx_rcrdata1;
-	u32 tx_bcbdata0;
-	u32 tx_bcbdata1;
-	u32 reserved3[0x7ff-0x207];
-	u32 vp_status;
-	u32 vp_pr_cd;
-	u32 vp_stuff;
-	u32 vp_remap;
-	u32 vp_conf;
-	u32 vp_stat;
-	u32 vp_int;
-	u32 vp_mask;
-	u32 vp_pol;
-	u32 reserved4[0xfff-0x808];
-	u32 fc_invidconf;
-	u32 fc_inhactv0;
-	u32 fc_inhactv1;
-	u32 fc_inhblank0;
-	u32 fc_inhblank1;
-	u32 fc_invactv0;
-	u32 fc_invactv1;
-	u32 fc_invblank;
-	u32 fc_hsyncindelay0;
-	u32 fc_hsyncindelay1;
-	u32 fc_hsyncinwidth0;
-	u32 fc_hsyncinwidth1;
-	u32 fc_vsyncindelay;
-	u32 fc_vsyncinwidth;
-	u32 fc_infreq0;
-	u32 fc_infreq1;
-	u32 fc_infreq2;
-	u32 fc_ctrldur;
-	u32 fc_exctrldur;
-	u32 fc_exctrlspac;
-	u32 fc_ch0pream;
-	u32 fc_ch1pream;
-	u32 fc_ch2pream;
-	u32 fc_aviconf3;
-	u32 fc_gcp;
-	u32 fc_aviconf0;
-	u32 fc_aviconf1;
-	u32 fc_aviconf2;
-	u32 fc_avivid;
-	u32 fc_avietb0;
-	u32 fc_avietb1;
-	u32 fc_avisbb0;
-	u32 fc_avisbb1;
-	u32 fc_avielb0;
-	u32 fc_avielb1;
-	u32 fc_avisrb0;
-	u32 fc_avisrb1;
-	u32 fc_audiconf0;
-	u32 fc_audiconf1;
-	u32 fc_audiconf2;
-	u32 fc_audiconf3;
-	u32 fc_vsdieeeid0;
-	u32 fc_vsdsize;
-	u32 reserved7[0x2fff-0x102a];
-	u32 phy_conf0;
-	u32 phy_tst0;
-	u32 phy_tst1;
-	u32 phy_tst2;
-	u32 phy_stat0;
-	u32 phy_int0;
-	u32 phy_mask0;
-	u32 phy_pol0;
-	u32 reserved8[0x301f-0x3007];
-	u32 phy_i2cm_slave_addr;
-	u32 phy_i2cm_address_addr;
-	u32 phy_i2cm_datao_1_addr;
-	u32 phy_i2cm_datao_0_addr;
-	u32 phy_i2cm_datai_1_addr;
-	u32 phy_i2cm_datai_0_addr;
-	u32 phy_i2cm_operation_addr;
-	u32 phy_i2cm_int_addr;
-	u32 phy_i2cm_ctlint_addr;
-	u32 phy_i2cm_div_addr;
-	u32 phy_i2cm_softrstz_addr;
-	u32 phy_i2cm_ss_scl_hcnt_1_addr;
-	u32 phy_i2cm_ss_scl_hcnt_0_addr;
-	u32 phy_i2cm_ss_scl_lcnt_1_addr;
-	u32 phy_i2cm_ss_scl_lcnt_0_addr;
-	u32 phy_i2cm_fs_scl_hcnt_1_addr;
-	u32 phy_i2cm_fs_scl_hcnt_0_addr;
-	u32 phy_i2cm_fs_scl_lcnt_1_addr;
-	u32 phy_i2cm_fs_scl_lcnt_0_addr;
-	u32 reserved9[0x30ff-0x3032];
-	u32 aud_conf0;
-	u32 aud_conf1;
-	u32 aud_int;
-	u32 aud_conf2;
-	u32 aud_int1;
-	u32 reserved32[0x31ff-0x3104];
-	u32 aud_n1;
-	u32 aud_n2;
-	u32 aud_n3;
-	u32 aud_cts1;
-	u32 aud_cts2;
-	u32 aud_cts3;
-	u32 aud_inputclkfs;
-	u32 reserved12[0x3fff-0x3206];
-	u32 mc_sfrdiv;
-	u32 mc_clkdis;
-	u32 mc_swrstz;
-	u32 mc_opctrl;
-	u32 mc_flowctrl;
-	u32 mc_phyrstz;
-	u32 mc_lockonclock;
-	u32 mc_heacphy_rst;
-	u32 reserved13[0x40ff-0x4007];
-	u32 csc_cfg;
-	u32 csc_scale;
-	struct {
-		u32 msb;
-		u32 lsb;
-	} csc_coef[3][4];
-	u32 reserved17[0x7dff-0x4119];
-	u32 i2cm_slave;
-	u32 i2c_address;
-	u32 i2cm_datao;
-	u32 i2cm_datai;
-	u32 i2cm_operation;
-	u32 i2cm_int;
-	u32 i2cm_ctlint;
-	u32 i2cm_div;
-	u32 i2cm_segaddr;
-	u32 i2cm_softrstz;
-	u32 i2cm_segptr;
-	u32 i2cm_ss_scl_hcnt_1_addr;
-	u32 i2cm_ss_scl_hcnt_0_addr;
-	u32 i2cm_ss_scl_lcnt_1_addr;
-	u32 i2cm_ss_scl_lcnt_0_addr;
-	u32 i2cm_fs_scl_hcnt_1_addr;
-	u32 i2cm_fs_scl_hcnt_0_addr;
-	u32 i2cm_fs_scl_lcnt_1_addr;
-	u32 i2cm_fs_scl_lcnt_0_addr;
-	u32 reserved18[0x7e1f-0x7e12];
-	u32 i2cm_buf0;
-};
-check_member(rk3288_hdmi, i2cm_buf0, 0x1f880);
-
-enum {
-	/* HDMI PHY registers define */
-	PHY_OPMODE_PLLCFG = 0x06,
-	PHY_CKCALCTRL = 0x05,
-	PHY_CKSYMTXCTRL = 0x09,
-	PHY_VLEVCTRL = 0x0e,
-	PHY_PLLCURRCTRL = 0x10,
-	PHY_PLLPHBYCTRL = 0x13,
-	PHY_PLLGMPCTRL = 0x15,
-	PHY_PLLCLKBISTPHASE = 0x17,
-	PHY_TXTERM = 0x19,
-
-	/* ih_phy_stat0 field values */
-	HDMI_IH_PHY_STAT0_HPD = 0x1,
-
-	/* ih_mute field values */
-	HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2,
-	HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1,
-
-	/* tx_invid0 field values */
-	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00,
-	HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1f,
-	HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0,
-
-	/* tx_instuffing field values */
-	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4,
-	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2,
-	HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1,
-
-	/* vp_pr_cd field values */
-	HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xf0,
-	HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4,
-	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0f,
-	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0,
-
-	/* vp_stuff field values */
-	HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20,
-	HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5,
-	HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4,
-	HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4,
-	HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2,
-	HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2,
-	HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1,
-	HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1,
-
-	/* vp_conf field values */
-	HDMI_VP_CONF_BYPASS_EN_MASK = 0x40,
-	HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40,
-	HDMI_VP_CONF_PP_EN_ENMASK = 0x20,
-	HDMI_VP_CONF_PP_EN_DISABLE = 0x00,
-	HDMI_VP_CONF_PR_EN_MASK = 0x10,
-	HDMI_VP_CONF_PR_EN_DISABLE = 0x00,
-	HDMI_VP_CONF_YCC422_EN_MASK = 0x8,
-	HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0,
-	HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4,
-	HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4,
-	HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3,
-	HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3,
-
-	/* vp_remap field values */
-	HDMI_VP_REMAP_YCC422_16BIT = 0x0,
-
-	/* fc_invidconf field values */
-	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80,
-	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80,
-	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00,
-	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40,
-	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40,
-	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
-	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20,
-	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20,
-	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
-	HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10,
-	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10,
-	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00,
-	HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8,
-	HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8,
-	HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0,
-	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2,
-	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2,
-	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0,
-	HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1,
-	HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1,
-	HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0,
-
-
-	/* fc_aviconf0-fc_aviconf3 field values */
-	HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03,
-	HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00,
-	HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01,
-	HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02,
-	HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40,
-	HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40,
-	HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00,
-	HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0c,
-	HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00,
-	HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04,
-	HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08,
-	HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0c,
-	HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30,
-	HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10,
-	HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20,
-	HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00,
-
-	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0f,
-	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08,
-	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09,
-	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0a,
-	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0b,
-	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30,
-	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00,
-	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10,
-	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20,
-	HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xc0,
-	HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00,
-	HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40,
-	HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80,
-	HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xc0,
-
-	HDMI_FC_AVICONF2_SCALING_MASK = 0x03,
-	HDMI_FC_AVICONF2_SCALING_NONE = 0x00,
-	HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01,
-	HDMI_FC_AVICONF2_SCALING_VERT = 0x02,
-	HDMI_FC_AVICONF2_SCALING_HORIZ_vert = 0x03,
-	HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0c,
-	HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00,
-	HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04,
-	HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08,
-	HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70,
-	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00,
-	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10,
-	HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20,
-	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30,
-	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40,
-	HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80,
-	HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00,
-	HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80,
-
-	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03,
-	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00,
-	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01,
-	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02,
-	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03,
-	HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0c,
-	HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00,
-	HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04,
-
-	/* fc_gcp field values*/
-	HDMI_FC_GCP_SET_AVMUTE = 0x02,
-	HDMI_FC_GCP_CLEAR_AVMUTE = 0x01,
-
-	/* phy_conf0 field values */
-	HDMI_PHY_CONF0_PDZ_MASK = 0x80,
-	HDMI_PHY_CONF0_PDZ_OFFSET = 7,
-	HDMI_PHY_CONF0_ENTMDS_MASK = 0x40,
-	HDMI_PHY_CONF0_ENTMDS_OFFSET = 6,
-	HDMI_PHY_CONF0_SPARECTRL_MASK = 0x20,
-	HDMI_PHY_CONF0_SPARECTRL_OFFSET = 5,
-	HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10,
-	HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4,
-	HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8,
-	HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3,
-	HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2,
-	HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1,
-	HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1,
-	HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0,
-
-	/* phy_tst0 field values */
-	HDMI_PHY_TST0_TSTCLR_MASK = 0x20,
-	HDMI_PHY_TST0_TSTCLR_OFFSET = 5,
-
-	/* phy_stat0 field values */
-	HDMI_PHY_HPD = 0x02,
-	HDMI_PHY_TX_PHY_LOCK = 0x01,
-
-	/* phy_i2cm_slave_addr field values */
-	HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69,
-
-	/* phy_i2cm_operation_addr field values */
-	HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10,
-
-	/* hdmi_phy_i2cm_int_addr */
-	HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08,
-
-	/* hdmi_phy_i2cm_ctlint_addr */
-	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80,
-	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08,
-
-	/* aud_conf0 field values */
-	HDMI_AUD_CONF0_SW_AUDIO_FIFO_RST = 0x80,
-	HDMI_AUD_CONF0_I2S_SELECT = 0x20,
-	HDMI_AUD_CONF0_I2S_IN_EN_0 = 0x01,
-	HDMI_AUD_CONF0_I2S_IN_EN_1 = 0x02,
-	HDMI_AUD_CONF0_I2S_IN_EN_2 = 0x04,
-	HDMI_AUD_CONF0_I2S_IN_EN_3 = 0x08,
-
-	/* aud_conf0 field values */
-	HDMI_AUD_CONF1_I2S_MODE_STANDARD_MODE = 0x0,
-	HDMI_AUD_CONF1_I2S_WIDTH_16BIT = 0x10,
-
-	/* aud_n3 field values */
-	HDMI_AUD_N3_NCTS_ATOMIC_WRITE = 0x80,
-	HDMI_AUD_N3_AUDN19_16_MASK = 0x0f,
-
-	/* aud_cts3 field values */
-	HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5,
-	HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,
-	HDMI_AUD_CTS3_N_SHIFT_1 = 0,
-	HDMI_AUD_CTS3_N_SHIFT_16 = 0x20,
-	HDMI_AUD_CTS3_N_SHIFT_32 = 0x40,
-	HDMI_AUD_CTS3_N_SHIFT_64 = 0x60,
-	HDMI_AUD_CTS3_N_SHIFT_128 = 0x80,
-	HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0,
-	HDMI_AUD_CTS3_CTS_MANUAL = 0x10,
-	HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f,
-
-	/* aud_inputclkfs filed values */
-	HDMI_AUD_INPUTCLKFS_128 = 0x0,
-
-	/* mc_clkdis field values */
-	HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8,
-	HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2,
-	HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1,
-
-	/* mc_swrstz field values */
-	HDMI_MC_SWRSTZ_II2SSWRST_REQ = 0x08,
-	HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02,
-
-	/* mc_flowctrl field values */
-	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1,
-	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0,
-
-	/* mc_phyrstz field values */
-	HDMI_MC_PHYRSTZ_ASSERT = 0x0,
-	HDMI_MC_PHYRSTZ_DEASSERT = 0x1,
-
-	/* mc_heacphy_rst field values */
-	HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
-
-	/* csc_cfg field values */
-	HDMI_CSC_CFG_INTMODE_DISABLE = 0x00,
-
-	/* csc_scale field values */
-	HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xf0,
-	HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00,
-	HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50,
-	HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60,
-	HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70,
-	HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03,
-
-	/* i2cm filed values */
-	HDMI_I2CM_SLAVE_DDC_ADDR = 0x50,
-	HDMI_I2CM_SEGADDR_DDC = 0x30,
-	HDMI_I2CM_OPT_RD8_EXT = 0x8,
-	HDMI_I2CM_OPT_RD8 = 0x4,
-	HDMI_I2CM_DIV_FAST_STD_MODE = 0x8,
-	HDMI_I2CM_DIV_FAST_MODE = 0x8,
-	HDMI_I2CM_DIV_STD_MODE = 0x0,
-	HDMI_I2CM_SOFTRSTZ = 0x1,
-};
-
-/*
-struct display_timing;
-struct rk3288_grf;
-
-int rk_hdmi_init(struct rk3288_grf *grf, u32 vop_id);
-int rk_hdmi_enable(const struct display_timing *edid);
-int rk_hdmi_get_edid(struct rk3288_grf *grf, struct display_timing *edid);
-*/
-
-#endif

arch/arm/include/asm/arch-rockchip/periph.h

@@ -38,6 +38,7 @@ enum periph_id {
 	PERIPH_ID_SDMMC1,
 	PERIPH_ID_SDMMC2,
 	PERIPH_ID_HDMI,
+	PERIPH_ID_GMAC,
 
 	PERIPH_ID_COUNT,
 

arch/arm/include/asm/arch-sunxi/clock_sun6i.h

@@ -242,7 +242,7 @@ struct sunxi_ccm_reg {
 /* ahb_gate0 offsets */
 #define AHB_GATE_OFFSET_USB_OHCI1	30
 #define AHB_GATE_OFFSET_USB_OHCI0	29
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
 /*
  * These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
  * them 0 - 2 like they were called on older SoCs.
@@ -293,7 +293,7 @@ struct sunxi_ccm_reg {
 #define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
 #define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
 #define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
 /*
  * These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
  * them 0 - 2 like they were called on older SoCs.

arch/arm/include/asm/arch-sunxi/cpu.h

@@ -15,5 +15,6 @@
 
 #define SOCID_A64	0x1689
 #define SOCID_H3	0x1680
+#define SOCID_H5	0x1718
 
 #endif /* _SUNXI_CPU_H */

arch/arm/include/asm/arch-sunxi/cpu_sun4i.h

@@ -56,7 +56,7 @@
 #define SUNXI_USB2_BASE			0x01c1c000
 #endif
 #ifdef CONFIG_SUNXI_GEN_SUN6I
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
 #define SUNXI_USBPHY_BASE		0x01c19000
 #define SUNXI_USB0_BASE			0x01c1a000
 #define SUNXI_USB1_BASE			0x01c1b000
@@ -94,7 +94,7 @@
 #define SUNXI_KEYPAD_BASE		0x01c23000
 #define SUNXI_TZPC_BASE			0x01c23400
 
-#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \
 defined(CONFIG_MACH_SUN50I)
 /* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
 #define SUNXI_SIDC_BASE			0x01c14000