Prepare v2018.09

Signed-off-by: Tom Rini <trini@konsulko.com>

.gitignore

@@ -8,7 +8,7 @@
 .*
 *.a
 *.bin
-*.cfgtmp
+*.cfgout
 *.dtb
 *.dtb.S
 *.elf

.mailmap

@@ -34,3 +34,5 @@ Wolfgang Denk <wdenk>
 York Sun <yorksun@freescale.com>
 York Sun <york.sun@nxp.com>
 Łukasz Majewski <l.majewski@samsung.com>
+Lukasz Majewski <lukma@denx.de>
+Mirza <Taimoor_Mirza@mentor.com>

.travis.yml

@@ -87,9 +87,8 @@ before_script:
     fi
   - if [[ "${TOOLCHAIN}" == "powerpc" ]]; then ./tools/buildman/buildman --fetch-arch powerpc; fi
   - if [[ "${TOOLCHAIN}" == "riscv" ]]; then
-        wget https://github.com/andestech/prebuilt/releases/download/20180530/riscv64-unknown-linux-gnu.tar.gz &&
-        tar -C /tmp -xf riscv64-unknown-linux-gnu.tar.gz &&
-        echo -e "\n[toolchain-prefix]\nriscv = /tmp/riscv64-unknown-linux-gnu/bin/riscv64-unknown-linux-gnu-" >> ~/.buildman;
+       ./tools/buildman/buildman --fetch-arch riscv64;
+       echo -e "\n[toolchain-alias]\nriscv = riscv64" >> ~/.buildman;
     fi
   - if [[ "${QEMU_TARGET}" != "" ]]; then
        git clone git://git.qemu.org/qemu.git /tmp/qemu;
@@ -146,235 +145,277 @@ matrix:
   include:
   # we need to build by vendor due to 50min time limit for builds
   # each env setting here is a dedicated build
-    - env:
+    - name: "buildman arc"
+      env:
         - BUILDMAN="arc"
           TOOLCHAIN="arc"
-    - env:
+    - name: "buildman arm11 arm7 arm920t arm946es"
+      env:
         - BUILDMAN="arm11 arm7 arm920t arm946es"
-    - env:
+    - name: "buildman arm926ejs (non-mx,siemens,atmel,kirkwood)"
+      env:
         - JOB="arm926ejs"
-          BUILDMAN="arm926ejs -x mx,siemens,atmel"
-    - env:
+          BUILDMAN="arm926ejs -x mx,siemens,atmel,kirkwood"
+    - name: "buildman atmel"
+      env:
         - BUILDMAN="atmel"
-    - env:
-        - BUILDMAN="aries"
-    - env:
-          BUILDMAN="boundary engicam toradex"
-    - env:
-        - JOB="Freescale ARM32"
-          BUILDMAN="freescale -x powerpc,m68k,aarch64"
-    - env:
-        - JOB="Freescale AArch64"
-          BUILDMAN="freescale&aarch64"
-    - env:
-        - JOB="i.MX6 (non-Freescale)"
-          BUILDMAN="mx6 -x freescale,toradex,boundary,engicam"
-    - env:
-        - JOB="i.MX (non-Freescale, non-i.MX6)"
-          BUILDMAN="mx -x freescale,mx6,toradex"
-    - env:
+    - name: "buildman boundary engicam toradex"
+      env:
+        - BUILDMAN="boundary engicam toradex"
+    - name: "buildman Freescale ARM32"
+      env:
+        - BUILDMAN="freescale -x powerpc,m68k,aarch64"
+    - name: "buildman Freescale AArch64"
+      env:
+        - BUILDMAN="freescale&aarch64"
+    - name: "buildman i.MX6 (non-Freescale)"
+      env:
+        - BUILDMAN="mx6 -x freescale,toradex,boundary,engicam"
+    - name: "buildman i.MX (non-Freescale,i.MX6,toradex)"
+      env:
+        - BUILDMAN="mx -x freescale,mx6,toradex"
+    - name: "buildman k2"
+      env:
         - BUILDMAN="k2"
-    - env:
+    - name: "buildman samsung socfpga"
+      env:
         - BUILDMAN="samsung socfpga"
-    - env:
+    - name: "buildman sun4i"
+      env:
         - BUILDMAN="sun4i"
-    - env:
+    - name: "buildman sun5i"
+      env:
         - BUILDMAN="sun5i"
-    - env:
+    - name: "buildman sun6i"
+      env:
         - BUILDMAN="sun6i"
-    - env:
+    - name: "buildman sun7i"
+      env:
         - BUILDMAN="sun7i"
-    - env:
+    - name: "buildman sun8i"
+      env:
         - BUILDMAN="sun8i"
-    - env:
+    - name: "buildman sun9i"
+      env:
         - BUILDMAN="sun9i"
-    - env:
+    - name: "buildman sun50i"
+      env:
         - BUILDMAN="sun50i"
-    - env:
-        - JOB="Catch-all ARM"
-          BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,aries,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
-    - env:
+    - name: "buildman catch-all ARM"
+      env:
+        - BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
+    - name: "buildman sandbox x86"
+      env:
         - BUILDMAN="sandbox x86"
           TOOLCHAIN="x86_64"
-    - env:
-        - BUILDMAN="kirkwood"
-    - env:
+    - name: "buildman kirkwood (excluding openrd)"
+      env:
+        - BUILDMAN="kirkwood -x openrd"
+    - name: "buildman mvebu"
+      env:
         - BUILDMAN="mvebu"
-    - env:
-        - JOB="PXA"
+    - name: "buildman PXA (non-toradex)"
+      env:
         - BUILDMAN="pxa -x toradex"
-    - env:
+    - name: "buildman m68k"
+      env:
         - BUILDMAN="m68k"
           TOOLCHAIN="m68k"
-    - env:
+    - name: "buildman microblaze"
+      env:
         - BUILDMAN="microblaze"
           TOOLCHAIN="microblaze"
-    - env:
+    - name: "buildman mips"
+      env:
         - BUILDMAN="mips"
           TOOLCHAIN="mips"
-    - env:
-        - JOB="Non-Freescale PowerPC"
-          BUILDMAN="powerpc -x freescale"
+    - name: "buildman non-Freescale PowerPC"
+      env:
+        - BUILDMAN="powerpc -x freescale"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman mpc85xx&freescale (excluding many)"
+      env:
         - BUILDMAN="mpc85xx&freescale -x t208xrdb -x t4qds -x t102* -x p1_p2_rdb_pc -x p1010rdb -x corenet_ds -x b4860qds -x bsc91*"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman t208xrdb corenet_ds"
+      env:
         - BUILDMAN="t208xrdb corenet_ds"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman Freescale PowerPC"
+      env:
         - BUILDMAN="t4qds b4860qds mpc83xx&freescale mpc86xx&freescale"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman t102*"
+      env:
         - BUILDMAN="t102*"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman p1_p2_rdb_pc"
+      env:
         - BUILDMAN="p1_p2_rdb_pc"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman p1010rdb bsc91"
+      env:
         - BUILDMAN="p1010rdb bsc91"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "buildman siemens"
+      env:
         - BUILDMAN="siemens"
-    - env:
-        - JOB="tegra"
-          BUILDMAN="tegra -x toradex"
-    - env:
-        - JOB="am33xx"
-          BUILDMAN="am33xx -x siemens"
-    - env:
+    - name: "buildman tegra"
+      env:
+        - BUILDMAN="tegra -x toradex"
+    - name: "buildman am33xx (no siemens)"
+      env:
+        - BUILDMAN="am33xx -x siemens"
+    - name: "buildman omap"
+      env:
         - BUILDMAN="omap"
-    - env:
+    - name: "buildman uniphier"
+      env:
         - BUILDMAN="uniphier"
-    - env:
-        - JOB="Catch-all AArch64"
-          BUILDMAN="aarch64 -x tegra,freescale,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
-    - env:
+    - name: "buildman catch-all AArch64"
+      env:
+        - BUILDMAN="aarch64 -x tegra,freescale,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
+    - name: "buildman rockchip"
+      env:
         - BUILDMAN="rockchip"
-    - env:
-        - JOB="sh"
-          BUILDMAN="sh -x arm"
+    - name: "buildman sh"
+      env:
+        - BUILDMAN="sh -x arm"
           TOOLCHAIN="sh"
-    - env:
-        - JOB="Xilinx (ARM)"
-          BUILDMAN="xilinx -x microblaze"
-    - env:
+    - name: "buildman Xilinx (ARM)"
+      env:
+        - BUILDMAN="xilinx -x microblaze"
+    - name: "buildman xtensa"
+      env:
         - BUILDMAN="xtensa"
           TOOLCHAIN="xtensa-dc233c-elf"
-    - env:
+    - name: "buildman riscv"
+      env:
         - BUILDMAN="riscv"
           TOOLCHAIN="riscv"
 
     # QA jobs for code analytics
     # static code analysis with cppcheck (we can add --enable=all later)
-    - env:
-        - JOB="cppcheck"
+    - name: "cppcheck"
       script:
         - cppcheck --force --quiet --inline-suppr .
     # search for TODO within source tree
-    - env:
-        - JOB="grep TODO"
+    - name: "grep TODO"
       script:
         - grep -r TODO .
     # search for FIXME within source tree
-    - env:
-        - JOB="grep FIXME HACK"
+    - name: "grep FIXME HACK"
       script:
         - grep -r FIXME .
     # search for HACK within source tree and ignore HACKKIT board
       script:
         - grep -r HACK . | grep -v HACKKIT
     # some statistics about the code base
-    - env:
-        - JOB="sloccount"
+    - name: "sloccount"
       script:
         - sloccount .
 
     # test/py
-    - env:
+    - name: "test/py sandbox"
+      env:
         - TEST_PY_BD="sandbox"
           BUILDMAN="^sandbox$"
           TOOLCHAIN="x86_64"
-    - env:
+    - name: "test/py sandbox_spl"
+      env:
         - TEST_PY_BD="sandbox_spl"
           TEST_PY_TEST_SPEC="test_ofplatdata"
           BUILDMAN="^sandbox$"
           TOOLCHAIN="x86_64"
           TEST_PY_TOOLS="yes"
-    - env:
+    - name: "test/py sandbox_flattree"
+      env:
         - TEST_PY_BD="sandbox_flattree"
           BUILDMAN="^sandbox_flattree$"
           TOOLCHAIN="x86_64"
-    - env:
+    - name: "test/py vexpress_ca15_tc2"
+      env:
         - TEST_PY_BD="vexpress_ca15_tc2"
           TEST_PY_ID="--id qemu"
           QEMU_TARGET="arm-softmmu"
           BUILDMAN="^vexpress_ca15_tc2$"
-    - env:
+    - name: "test/py vexpress_ca9x4"
+      env:
         - TEST_PY_BD="vexpress_ca9x4"
           TEST_PY_ID="--id qemu"
           QEMU_TARGET="arm-softmmu"
           BUILDMAN="^vexpress_ca9x4$"
-    - env:
+    - name: "test/py integratorcp_cm926ejs"
+      env:
         - TEST_PY_BD="integratorcp_cm926ejs"
           TEST_PY_TEST_SPEC="not sleep"
           TEST_PY_ID="--id qemu"
           QEMU_TARGET="arm-softmmu"
           BUILDMAN="^integratorcp_cm926ejs$"
-    - env:
+    - name: "test/py qemu_arm"
+      env:
         - TEST_PY_BD="qemu_arm"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="arm-softmmu"
           BUILDMAN="^qemu_arm$"
-    - env:
+    - name: "test/py qemu_arm64"
+      env:
         - TEST_PY_BD="qemu_arm64"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="aarch64-softmmu"
           BUILDMAN="^qemu_arm64$"
-    - env:
+    - name: "test/py qemu_mips"
+      env:
         - TEST_PY_BD="qemu_mips"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="mips-softmmu"
           BUILDMAN="^qemu_mips$"
           TOOLCHAIN="mips"
-    - env:
+    - name: "test/py qemu_mipsel"
+      env:
         - TEST_PY_BD="qemu_mipsel"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="mipsel-softmmu"
           BUILDMAN="^qemu_mipsel$"
           TOOLCHAIN="mips"
-    - env:
+    - name: "test/py qemu_mips64"
+      env:
         - TEST_PY_BD="qemu_mips64"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="mips64-softmmu"
           BUILDMAN="^qemu_mips64$"
           TOOLCHAIN="mips"
-    - env:
+    - name: "test/py qemu_mips64el"
+      env:
         - TEST_PY_BD="qemu_mips64el"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="mips64el-softmmu"
           BUILDMAN="^qemu_mips64el$"
           TOOLCHAIN="mips"
-    - env:
+    - name: "test/py qemu-ppce500"
+      env:
         - TEST_PY_BD="qemu-ppce500"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="ppc-softmmu"
           BUILDMAN="^qemu-ppce500$"
           TOOLCHAIN="powerpc"
-    - env:
+    - name: "test/py qemu-x86"
+      env:
         - TEST_PY_BD="qemu-x86"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="i386-softmmu"
           BUILDMAN="^qemu-x86$"
           TOOLCHAIN="x86_64"
           BUILD_ROM="yes"
-    - env:
+    - name: "test/py zynq_zc702"
+      env:
         - TEST_PY_BD="zynq_zc702"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="arm-softmmu"
           TEST_PY_ID="--id qemu"
           BUILDMAN="^zynq_zc702$"
-    - env:
+    - name: "test/py xtfpga"
+      env:
         - TEST_PY_BD="xtfpga"
           TEST_PY_TEST_SPEC="not sleep"
           QEMU_TARGET="xtensa-softmmu"

Documentation/.gitignore

@@ -0,0 +1,2 @@
+output
+*.pyc

Documentation/Makefile

@@ -0,0 +1,124 @@
+# -*- makefile -*-
+# Makefile for Sphinx documentation
+#
+
+subdir-y :=
+
+# You can set these variables from the command line.
+SPHINXBUILD   = sphinx-build
+SPHINXOPTS    =
+SPHINXDIRS    = .
+_SPHINXDIRS   = $(patsubst $(srctree)/Documentation/%/conf.py,%,$(wildcard $(srctree)/Documentation/*/conf.py))
+SPHINX_CONF   = conf.py
+PAPER         =
+BUILDDIR      = $(obj)/output
+PDFLATEX      = xelatex
+LATEXOPTS     = -interaction=batchmode
+
+# User-friendly check for sphinx-build
+HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+ifeq ($(HAVE_SPHINX),0)
+
+.DEFAULT:
+	$(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
+	@echo
+	@./scripts/sphinx-pre-install
+	@echo "  SKIP    Sphinx $@ target."
+
+else # HAVE_SPHINX
+
+# User-friendly check for pdflatex
+HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+KERNELDOC       = $(srctree)/scripts/kernel-doc
+KERNELDOC_CONF  = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
+ALLSPHINXOPTS   =  $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
+loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
+
+# $2 sphinx builder e.g. "html"
+# $3 name of the build subfolder / e.g. "media", used as:
+#    * dest folder relative to $(BUILDDIR) and
+#    * cache folder relative to $(BUILDDIR)/.doctrees
+# $4 dest subfolder e.g. "man" for man pages at media/man
+# $5 reST source folder relative to $(srctree)/$(src),
+#    e.g. "media" for the linux-tv book-set at ./Documentation/media
+
+quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
+      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media $2 && \
+	PYTHONDONTWRITEBYTECODE=1 \
+	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
+	$(SPHINXBUILD) \
+	-b $2 \
+	-c $(abspath $(srctree)/$(src)) \
+	-d $(abspath $(BUILDDIR)/.doctrees/$3) \
+	-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
+	$(ALLSPHINXOPTS) \
+	$(abspath $(srctree)/$(src)/$5) \
+	$(abspath $(BUILDDIR)/$3/$4)
+
+htmldocs:
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
+
+linkcheckdocs:
+	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
+
+latexdocs:
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
+
+ifeq ($(HAVE_PDFLATEX),0)
+
+pdfdocs:
+	$(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
+	@echo "  SKIP    Sphinx $@ target."
+
+else # HAVE_PDFLATEX
+
+pdfdocs: latexdocs
+	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
+
+endif # HAVE_PDFLATEX
+
+epubdocs:
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
+
+xmldocs:
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
+
+endif # HAVE_SPHINX
+
+# The following targets are independent of HAVE_SPHINX, and the rules should
+# work or silently pass without Sphinx.
+
+refcheckdocs:
+	$(Q)cd $(srctree);scripts/documentation-file-ref-check
+
+cleandocs:
+	$(Q)rm -rf $(BUILDDIR)
+	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/media clean
+
+dochelp:
+	@echo  ' Linux kernel internal documentation in different formats from ReST:'
+	@echo  '  htmldocs        - HTML'
+	@echo  '  latexdocs       - LaTeX'
+	@echo  '  pdfdocs         - PDF'
+	@echo  '  epubdocs        - EPUB'
+	@echo  '  xmldocs         - XML'
+	@echo  '  linkcheckdocs   - check for broken external links (will connect to external hosts)'
+	@echo  '  refcheckdocs    - check for references to non-existing files under Documentation'
+	@echo  '  cleandocs       - clean all generated files'
+	@echo
+	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
+	@echo  '  valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
+	@echo
+	@echo  '  make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
+	@echo  '  configuration. This is e.g. useful to build with nit-picking config.'
+	@echo
+	@echo  '  Default location for the generated documents is Documentation/output'

Documentation/conf.py

@@ -0,0 +1,528 @@
+# -*- coding: utf-8 -*-
+#
+# The U-Boot documentation build configuration file, created by
+# sphinx-quickstart on Fri Feb 12 13:51:46 2016.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+import sphinx
+
+# Get Sphinx version
+major, minor, patch = sphinx.version_info[:3]
+
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+sys.path.insert(0, os.path.abspath('sphinx'))
+from load_config import loadConfig
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+needs_sphinx = '1.3'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure']
+
+# The name of the math extension changed on Sphinx 1.4
+if major == 1 and minor > 3:
+    extensions.append("sphinx.ext.imgmath")
+else:
+    extensions.append("sphinx.ext.pngmath")
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = 'Das U-Boot'
+copyright = 'The U-Boot development community'
+author = 'The U-Boot development community'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# In a normal build, version and release are are set to KERNELVERSION and
+# KERNELRELEASE, respectively, from the Makefile via Sphinx command line
+# arguments.
+#
+# The following code tries to extract the information by reading the Makefile,
+# when Sphinx is run directly (e.g. by Read the Docs).
+try:
+    makefile_version = None
+    makefile_patchlevel = None
+    for line in open('../Makefile'):
+        key, val = [x.strip() for x in line.split('=', 2)]
+        if key == 'VERSION':
+            makefile_version = val
+        elif key == 'PATCHLEVEL':
+            makefile_patchlevel = val
+        if makefile_version and makefile_patchlevel:
+            break
+except:
+    pass
+finally:
+    if makefile_version and makefile_patchlevel:
+        version = release = makefile_version + '.' + makefile_patchlevel
+    else:
+        version = release = "unknown version"
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['output']
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+#keep_warnings = False
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+primary_domain = 'c'
+highlight_language = 'none'
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+
+# The Read the Docs theme is available from
+# - https://github.com/snide/sphinx_rtd_theme
+# - https://pypi.python.org/pypi/sphinx_rtd_theme
+# - python-sphinx-rtd-theme package (on Debian)
+try:
+    import sphinx_rtd_theme
+    html_theme = 'sphinx_rtd_theme'
+    html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
+except ImportError:
+    sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n')
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+
+html_static_path = ['sphinx-static']
+
+html_context = {
+    'css_files': [
+        '_static/theme_overrides.css',
+    ],
+}
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+#html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Language to be used for generating the HTML full-text search index.
+# Sphinx supports the following languages:
+#   'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
+#   'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr'
+#html_search_language = 'en'
+
+# A dictionary with options for the search language support, empty by default.
+# Now only 'ja' uses this config value
+#html_search_options = {'type': 'default'}
+
+# The name of a javascript file (relative to the configuration directory) that
+# implements a search results scorer. If empty, the default will be used.
+#html_search_scorer = 'scorer.js'
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'TheUBootdoc'
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+'papersize': 'a4paper',
+
+# The font size ('10pt', '11pt' or '12pt').
+'pointsize': '8pt',
+
+# Latex figure (float) alignment
+#'figure_align': 'htbp',
+
+# Don't mangle with UTF-8 chars
+'inputenc': '',
+'utf8extra': '',
+
+# Additional stuff for the LaTeX preamble.
+    'preamble': '''
+	% Use some font with UTF-8 support with XeLaTeX
+        \\usepackage{fontspec}
+        \\setsansfont{DejaVu Serif}
+        \\setromanfont{DejaVu Sans}
+        \\setmonofont{DejaVu Sans Mono}
+
+     '''
+}
+
+# Fix reference escape troubles with Sphinx 1.4.x
+if major == 1 and minor > 3:
+    latex_elements['preamble']  += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
+
+if major == 1 and minor <= 4:
+    latex_elements['preamble']  += '\\usepackage[margin=0.5in, top=1in, bottom=1in]{geometry}'
+elif major == 1 and (minor > 5 or (minor == 5 and patch >= 3)):
+    latex_elements['sphinxsetup'] = 'hmargin=0.5in, vmargin=1in'
+    latex_elements['preamble']  += '\\fvset{fontsize=auto}\n'
+
+# Customize notice background colors on Sphinx < 1.6:
+if major == 1 and minor < 6:
+   latex_elements['preamble']  += '''
+        \\usepackage{ifthen}
+
+        % Put notes in color and let them be inside a table
+	\\definecolor{NoteColor}{RGB}{204,255,255}
+	\\definecolor{WarningColor}{RGB}{255,204,204}
+	\\definecolor{AttentionColor}{RGB}{255,255,204}
+	\\definecolor{ImportantColor}{RGB}{192,255,204}
+	\\definecolor{OtherColor}{RGB}{204,204,204}
+        \\newlength{\\mynoticelength}
+        \\makeatletter\\newenvironment{coloredbox}[1]{%
+	   \\setlength{\\fboxrule}{1pt}
+	   \\setlength{\\fboxsep}{7pt}
+	   \\setlength{\\mynoticelength}{\\linewidth}
+	   \\addtolength{\\mynoticelength}{-2\\fboxsep}
+	   \\addtolength{\\mynoticelength}{-2\\fboxrule}
+           \\begin{lrbox}{\\@tempboxa}\\begin{minipage}{\\mynoticelength}}{\\end{minipage}\\end{lrbox}%
+	   \\ifthenelse%
+	      {\\equal{\\py@noticetype}{note}}%
+	      {\\colorbox{NoteColor}{\\usebox{\\@tempboxa}}}%
+	      {%
+	         \\ifthenelse%
+	         {\\equal{\\py@noticetype}{warning}}%
+	         {\\colorbox{WarningColor}{\\usebox{\\@tempboxa}}}%
+		 {%
+	            \\ifthenelse%
+	            {\\equal{\\py@noticetype}{attention}}%
+	            {\\colorbox{AttentionColor}{\\usebox{\\@tempboxa}}}%
+		    {%
+	               \\ifthenelse%
+	               {\\equal{\\py@noticetype}{important}}%
+	               {\\colorbox{ImportantColor}{\\usebox{\\@tempboxa}}}%
+	               {\\colorbox{OtherColor}{\\usebox{\\@tempboxa}}}%
+		    }%
+		 }%
+	      }%
+        }\\makeatother
+
+        \\makeatletter
+        \\renewenvironment{notice}[2]{%
+          \\def\\py@noticetype{#1}
+          \\begin{coloredbox}{#1}
+          \\bf\\it
+          \\par\\strong{#2}
+          \\csname py@noticestart@#1\\endcsname
+        }
+	{
+          \\csname py@noticeend@\\py@noticetype\\endcsname
+          \\end{coloredbox}
+        }
+	\\makeatother
+
+     '''
+
+# With Sphinx 1.6, it is possible to change the Bg color directly
+# by using:
+#	\definecolor{sphinxnoteBgColor}{RGB}{204,255,255}
+#	\definecolor{sphinxwarningBgColor}{RGB}{255,204,204}
+#	\definecolor{sphinxattentionBgColor}{RGB}{255,255,204}
+#	\definecolor{sphinximportantBgColor}{RGB}{192,255,204}
+#
+# However, it require to use sphinx heavy box with:
+#
+#	\renewenvironment{sphinxlightbox} {%
+#		\\begin{sphinxheavybox}
+#	}
+#		\\end{sphinxheavybox}
+#	}
+#
+# Unfortunately, the implementation is buggy: if a note is inside a
+# table, it isn't displayed well. So, for now, let's use boring
+# black and white notes.
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+# Sorted in alphabetical order
+latex_documents = [
+    ('index', 'u-boot-hacker-manual.tex', 'U-Boot Hacker Manual',
+     'The U-Boot development community', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'dasuboot', 'The U-Boot Documentation',
+     [author], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'DasUBoot', 'The U-Boot Documentation',
+     author, 'DasUBoot', 'One line description of project.',
+     'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#texinfo_no_detailmenu = False
+
+
+# -- Options for Epub output ----------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
+epub_author = author
+epub_publisher = author
+epub_copyright = copyright
+
+# The basename for the epub file. It defaults to the project name.
+#epub_basename = project
+
+# The HTML theme for the epub output. Since the default themes are not
+# optimized for small screen space, using the same theme for HTML and epub
+# output is usually not wise. This defaults to 'epub', a theme designed to save
+# visual space.
+#epub_theme = 'epub'
+
+# The language of the text. It defaults to the language option
+# or 'en' if the language is not set.
+#epub_language = ''
+
+# The scheme of the identifier. Typical schemes are ISBN or URL.
+#epub_scheme = ''
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#epub_identifier = ''
+
+# A unique identification for the text.
+#epub_uid = ''
+
+# A tuple containing the cover image and cover page html template filenames.
+#epub_cover = ()
+
+# A sequence of (type, uri, title) tuples for the guide element of content.opf.
+#epub_guide = ()
+
+# HTML files that should be inserted before the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_pre_files = []
+
+# HTML files that should be inserted after the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_post_files = []
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
+
+# The depth of the table of contents in toc.ncx.
+#epub_tocdepth = 3
+
+# Allow duplicate toc entries.
+#epub_tocdup = True
+
+# Choose between 'default' and 'includehidden'.
+#epub_tocscope = 'default'
+
+# Fix unsupported image types using the Pillow.
+#epub_fix_images = False
+
+# Scale large images.
+#epub_max_image_width = 0
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#epub_show_urls = 'inline'
+
+# If false, no index is generated.
+#epub_use_index = True
+
+#=======
+# rst2pdf
+#
+# Grouping the document tree into PDF files. List of tuples
+# (source start file, target name, title, author, options).
+#
+# See the Sphinx chapter of http://ralsina.me/static/manual.pdf
+#
+# FIXME: Do not add the index file here; the result will be too big. Adding
+# multiple PDF files here actually tries to get the cross-referencing right
+# *between* PDF files.
+pdf_documents = [
+    ('uboot-documentation', u'U-Boot', u'U-Boot', u'J. Random Bozo'),
+]
+
+# kernel-doc extension configuration for running Sphinx directly (e.g. by Read
+# the Docs). In a normal build, these are supplied from the Makefile via command
+# line arguments.
+kerneldoc_bin = '../scripts/kernel-doc'
+kerneldoc_srctree = '..'
+
+# ------------------------------------------------------------------------------
+# Since loadConfig overwrites settings from the global namespace, it has to be
+# the last statement in the conf.py file
+# ------------------------------------------------------------------------------
+loadConfig(globals())

Documentation/devicetree/bindings/axi/gdsys,ihs_axi.txt

@@ -0,0 +1,22 @@
+gdsys AXI busses of IHS FPGA devices
+
+Certain gdsys IHS FPGAs offer a interface to their built-in AXI bus with which
+the connected devices (usually IP cores) can be controlled via software.
+
+Required properties:
+- compatible: must be "gdsys,ihs_axi"
+- reg: describes the address and length of the AXI bus's register map (within
+  the FPGA's register space)
+
+Example:
+
+fpga0_axi_video0 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "gdsys,ihs_axi";
+	reg = <0x170 0x10>;
+
+	axi_dev_1 {
+        ...
+	};
+};

Documentation/devicetree/bindings/misc/gdsys,io-endpoint.txt

@@ -0,0 +1,20 @@
+gdsys IO endpoint of IHS FPGA devices
+
+The IO endpoint of IHS FPGA devices is a packet-based transmission interface
+that allows interconnected gdsys devices to send and receive data over the
+FPGA's main ethernet connection.
+
+Required properties:
+- compatible: must be "gdsys,io-endpoint"
+- reg: describes the address and length of the endpoint's register map (within
+  the FPGA's register space)
+
+Example:
+
+fpga0_ep0 {
+	compatible = "gdsys,io-endpoint";
+	reg = <0x020 0x10
+           0x320 0x10
+           0x340 0x10
+           0x360 0x10>;
+};

Documentation/efi.rst

@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+EFI subsystem
+=============
+
+Boot services
+-------------
+
+.. kernel-doc:: lib/efi_loader/efi_boottime.c
+   :internal:
+
+Runtime services
+----------------
+
+.. kernel-doc:: lib/efi_loader/efi_runtime.c
+   :internal:

Documentation/index.rst

@@ -0,0 +1,11 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+#######################
+U-Boot Developer Manual
+#######################
+
+.. toctree::
+
+   efi
+   linker_lists
+   serial

Documentation/linker_lists.rst

@@ -0,0 +1,100 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Linker-Generated Arrays
+=======================
+
+A linker list is constructed by grouping together linker input
+sections, each containing one entry of the list. Each input section
+contains a constant initialized variable which holds the entry's
+content. Linker list input sections are constructed from the list
+and entry names, plus a prefix which allows grouping all lists
+together. Assuming _list and _entry are the list and entry names,
+then the corresponding input section name is
+
+::
+
+  .u_boot_list_ + 2_ + @_list + _2_ + @_entry
+
+and the C variable name is
+
+::
+
+  _u_boot_list + _2_ + @_list + _2_ + @_entry
+
+This ensures uniqueness for both input section and C variable name.
+
+Note that the names differ only in the first character, "." for the
+section and "_" for the variable, so that the linker cannot confuse
+section and symbol names. From now on, both names will be referred
+to as
+
+::
+
+  %u_boot_list_ + 2_ + @_list + _2_ + @_entry
+
+Entry variables need never be referred to directly.
+
+The naming scheme for input sections allows grouping all linker lists
+into a single linker output section and grouping all entries for a
+single list.
+
+Note the two '_2_' constant components in the names: their presence
+allows putting a start and end symbols around a list, by mapping
+these symbols to sections names with components "1" (before) and
+"3" (after) instead of "2" (within).
+Start and end symbols for a list can generally be defined as
+
+::
+
+  %u_boot_list_2_ + @_list + _1_...
+  %u_boot_list_2_ + @_list + _3_...
+
+Start and end symbols for the whole of the linker lists area can be
+defined as
+
+::
+
+  %u_boot_list_1_...
+  %u_boot_list_3_...
+
+Here is an example of the sorted sections which result from a list
+"array" made up of three entries : "first", "second" and "third",
+iterated at least once.
+
+::
+
+  .u_boot_list_2_array_1
+  .u_boot_list_2_array_2_first
+  .u_boot_list_2_array_2_second
+  .u_boot_list_2_array_2_third
+  .u_boot_list_2_array_3
+
+If lists must be divided into sublists (e.g. for iterating only on
+part of a list), one can simply give the list a name of the form
+'outer_2_inner', where 'outer' is the global list name and 'inner'
+is the sub-list name. Iterators for the whole list should use the
+global list name ("outer"); iterators for only a sub-list should use
+the full sub-list name ("outer_2_inner").
+
+Here is an example of the sections generated from a global list
+named "drivers", two sub-lists named "i2c" and "pci", and iterators
+defined for the whole list and each sub-list:
+
+::
+
+  %u_boot_list_2_drivers_1
+  %u_boot_list_2_drivers_2_i2c_1
+  %u_boot_list_2_drivers_2_i2c_2_first
+  %u_boot_list_2_drivers_2_i2c_2_first
+  %u_boot_list_2_drivers_2_i2c_2_second
+  %u_boot_list_2_drivers_2_i2c_2_third
+  %u_boot_list_2_drivers_2_i2c_3
+  %u_boot_list_2_drivers_2_pci_1
+  %u_boot_list_2_drivers_2_pci_2_first
+  %u_boot_list_2_drivers_2_pci_2_second
+  %u_boot_list_2_drivers_2_pci_2_third
+  %u_boot_list_2_drivers_2_pci_3
+  %u_boot_list_2_drivers_3
+
+.. kernel-doc:: include/linker_lists.h
+   :internal:

Documentation/media/Makefile

@@ -0,0 +1,38 @@
+# Rules to convert a .h file to inline RST documentation
+
+SRC_DIR=$(srctree)/Documentation/media
+PARSER = $(srctree)/Documentation/sphinx/parse-headers.pl
+API = $(srctree)/include
+
+FILES = linker_lists.h.rst
+
+TARGETS := $(addprefix $(BUILDDIR)/, $(FILES))
+
+gen_rst = \
+	echo ${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions; \
+	${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions
+
+quiet_gen_rst = echo '  PARSE   $(patsubst $(srctree)/%,%,$<)'; \
+	${PARSER} $< $@ $(SRC_DIR)/$(notdir $@).exceptions
+
+silent_gen_rst = ${gen_rst}
+
+$(BUILDDIR)/linker_lists.h.rst: ${API}/linker_lists.h ${PARSER} $(SRC_DIR)/linker_lists.h.rst.exceptions
+	@$($(quiet)gen_rst)
+
+# Media build rules
+
+.PHONY: all html epub xml latex
+
+all: $(IMGDOT) $(BUILDDIR) ${TARGETS}
+html: all
+epub: all
+xml: all
+latex: $(IMGPDF) all
+linkcheck:
+
+clean:
+	-rm -f $(DOTTGT) $(IMGTGT) ${TARGETS} 2>/dev/null
+
+$(BUILDDIR):
+	$(Q)mkdir -p $@

Documentation/serial.rst

@@ -0,0 +1,7 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Serial system
+=============
+
+.. kernel-doc:: drivers/serial/serial.c
+   :internal:

Documentation/sphinx-static/theme_overrides.css

@@ -0,0 +1,89 @@
+/* -*- coding: utf-8; mode: css -*-
+ *
+ * Sphinx HTML theme customization: read the doc
+ *
+ */
+
+/* Interim: Code-blocks with line nos - lines and line numbers don't line up.
+ * see: https://github.com/rtfd/sphinx_rtd_theme/issues/419
+ */
+
+div[class^="highlight"] pre {
+    line-height: normal;
+}
+.rst-content .highlight > pre {
+    line-height: normal;
+}
+
+@media screen {
+
+    /* content column
+     *
+     * RTD theme's default is 800px as max width for the content, but we have
+     * tables with tons of columns, which need the full width of the view-port.
+     */
+
+    .wy-nav-content{max-width: none; }
+
+    /* table:
+     *
+     *   - Sequences of whitespace should collapse into a single whitespace.
+     *   - make the overflow auto (scrollbar if needed)
+     *   - align caption "left" ("center" is unsuitable on vast tables)
+     */
+
+    .wy-table-responsive table td { white-space: normal; }
+    .wy-table-responsive { overflow: auto; }
+    .rst-content table.docutils caption { text-align: left; font-size: 100%; }
+
+    /* captions:
+     *
+     *   - captions should have 100% (not 85%) font size
+     *   - hide the permalink symbol as long as link is not hovered
+     */
+
+    .toc-title {
+        font-size: 150%;
+	font-weight: bold;
+    }
+
+    caption, .wy-table caption, .rst-content table.field-list caption {
+        font-size: 100%;
+    }
+    caption a.headerlink { opacity: 0; }
+    caption a.headerlink:hover { opacity: 1; }
+
+    /* Menu selection and keystrokes */
+
+    span.menuselection {
+	color: blue;
+	font-family: "Courier New", Courier, monospace
+    }
+
+    code.kbd, code.kbd span {
+	color: white;
+	background-color: darkblue;
+	font-weight: bold;
+	font-family: "Courier New", Courier, monospace
+    }
+
+    /* fix bottom margin of lists items */
+
+    .rst-content .section ul li:last-child, .rst-content .section ul li p:last-child {
+          margin-bottom: 12px;
+    }
+
+    /* inline literal: drop the borderbox, padding and red color */
+
+    code, .rst-content tt, .rst-content code {
+        color: inherit;
+        border: none;
+        padding: unset;
+        background: inherit;
+        font-size: 85%;
+    }
+
+    .rst-content tt.literal,.rst-content tt.literal,.rst-content code.literal {
+        color: inherit;
+    }
+}

Documentation/sphinx/cdomain.py

@@ -0,0 +1,165 @@
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=W0141,C0113,C0103,C0325
+u"""
+    cdomain
+    ~~~~~~~
+
+    Replacement for the sphinx c-domain.
+
+    :copyright:  Copyright (C) 2016  Markus Heiser
+    :license:    GPL Version 2, June 1991 see Linux/COPYING for details.
+
+    List of customizations:
+
+    * Moved the *duplicate C object description* warnings for function
+      declarations in the nitpicky mode. See Sphinx documentation for
+      the config values for ``nitpick`` and ``nitpick_ignore``.
+
+    * Add option 'name' to the "c:function:" directive.  With option 'name' the
+      ref-name of a function can be modified. E.g.::
+
+          .. c:function:: int ioctl( int fd, int request )
+             :name: VIDIOC_LOG_STATUS
+
+      The func-name (e.g. ioctl) remains in the output but the ref-name changed
+      from 'ioctl' to 'VIDIOC_LOG_STATUS'. The function is referenced by::
+
+          * :c:func:`VIDIOC_LOG_STATUS` or
+          * :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3)
+
+     * Handle signatures of function-like macros well. Don't try to deduce
+       arguments types of function-like macros.
+
+"""
+
+from docutils import nodes
+from docutils.parsers.rst import directives
+
+import sphinx
+from sphinx import addnodes
+from sphinx.domains.c import c_funcptr_sig_re, c_sig_re
+from sphinx.domains.c import CObject as Base_CObject
+from sphinx.domains.c import CDomain as Base_CDomain
+
+__version__  = '1.0'
+
+# Get Sphinx version
+major, minor, patch = sphinx.version_info[:3]
+
+def setup(app):
+
+    app.override_domain(CDomain)
+
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
+class CObject(Base_CObject):
+
+    """
+    Description of a C language object.
+    """
+    option_spec = {
+        "name" : directives.unchanged
+    }
+
+    def handle_func_like_macro(self, sig, signode):
+        u"""Handles signatures of function-like macros.
+
+        If the objtype is 'function' and the the signature ``sig`` is a
+        function-like macro, the name of the macro is returned. Otherwise
+        ``False`` is returned.  """
+
+        if not self.objtype == 'function':
+            return False
+
+        m = c_funcptr_sig_re.match(sig)
+        if m is None:
+            m = c_sig_re.match(sig)
+            if m is None:
+                raise ValueError('no match')
+
+        rettype, fullname, arglist, _const = m.groups()
+        arglist = arglist.strip()
+        if rettype or not arglist:
+            return False
+
+        arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup
+        arglist = [a.strip() for a in arglist.split(",")]
+
+        # has the first argument a type?
+        if len(arglist[0].split(" ")) > 1:
+            return False
+
+        # This is a function-like macro, it's arguments are typeless!
+        signode  += addnodes.desc_name(fullname, fullname)
+        paramlist = addnodes.desc_parameterlist()
+        signode  += paramlist
+
+        for argname in arglist:
+            param = addnodes.desc_parameter('', '', noemph=True)
+            # separate by non-breaking space in the output
+            param += nodes.emphasis(argname, argname)
+            paramlist += param
+
+        return fullname
+
+    def handle_signature(self, sig, signode):
+        """Transform a C signature into RST nodes."""
+
+        fullname = self.handle_func_like_macro(sig, signode)
+        if not fullname:
+            fullname = super(CObject, self).handle_signature(sig, signode)
+
+        if "name" in self.options:
+            if self.objtype == 'function':
+                fullname = self.options["name"]
+            else:
+                # FIXME: handle :name: value of other declaration types?
+                pass
+        return fullname
+
+    def add_target_and_index(self, name, sig, signode):
+        # for C API items we add a prefix since names are usually not qualified
+        # by a module name and so easily clash with e.g. section titles
+        targetname = 'c.' + name
+        if targetname not in self.state.document.ids:
+            signode['names'].append(targetname)
+            signode['ids'].append(targetname)
+            signode['first'] = (not self.names)
+            self.state.document.note_explicit_target(signode)
+            inv = self.env.domaindata['c']['objects']
+            if (name in inv and self.env.config.nitpicky):
+                if self.objtype == 'function':
+                    if ('c:func', name) not in self.env.config.nitpick_ignore:
+                        self.state_machine.reporter.warning(
+                            'duplicate C object description of %s, ' % name +
+                            'other instance in ' + self.env.doc2path(inv[name][0]),
+                            line=self.lineno)
+            inv[name] = (self.env.docname, self.objtype)
+
+        indextext = self.get_index_text(name)
+        if indextext:
+            if major == 1 and minor < 4:
+                # indexnode's tuple changed in 1.4
+                # https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c
+                self.indexnode['entries'].append(
+                    ('single', indextext, targetname, ''))
+            else:
+                self.indexnode['entries'].append(
+                    ('single', indextext, targetname, '', None))
+
+class CDomain(Base_CDomain):
+
+    """C language domain."""
+    name = 'c'
+    label = 'C'
+    directives = {
+        'function': CObject,
+        'member':   CObject,
+        'macro':    CObject,
+        'type':     CObject,
+        'var':      CObject,
+    }

Documentation/sphinx/kernel_include.py

@@ -0,0 +1,190 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=R0903, C0330, R0914, R0912, E0401
+
+u"""
+    kernel-include
+    ~~~~~~~~~~~~~~
+
+    Implementation of the ``kernel-include`` reST-directive.
+
+    :copyright:  Copyright (C) 2016  Markus Heiser
+    :license:    GPL Version 2, June 1991 see linux/COPYING for details.
+
+    The ``kernel-include`` reST-directive is a replacement for the ``include``
+    directive. The ``kernel-include`` directive expand environment variables in
+    the path name and allows to include files from arbitrary locations.
+
+    .. hint::
+
+      Including files from arbitrary locations (e.g. from ``/etc``) is a
+      security risk for builders. This is why the ``include`` directive from
+      docutils *prohibit* pathnames pointing to locations *above* the filesystem
+      tree where the reST document with the include directive is placed.
+
+    Substrings of the form $name or ${name} are replaced by the value of
+    environment variable name. Malformed variable names and references to
+    non-existing variables are left unchanged.
+"""
+
+# ==============================================================================
+# imports
+# ==============================================================================
+
+import os.path
+
+from docutils import io, nodes, statemachine
+from docutils.utils.error_reporting import SafeString, ErrorString
+from docutils.parsers.rst import directives
+from docutils.parsers.rst.directives.body import CodeBlock, NumberLines
+from docutils.parsers.rst.directives.misc import Include
+
+__version__  = '1.0'
+
+# ==============================================================================
+def setup(app):
+# ==============================================================================
+
+    app.add_directive("kernel-include", KernelInclude)
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
+# ==============================================================================
+class KernelInclude(Include):
+# ==============================================================================
+
+    u"""KernelInclude (``kernel-include``) directive"""
+
+    def run(self):
+        path = os.path.realpath(
+            os.path.expandvars(self.arguments[0]))
+
+        # to get a bit security back, prohibit /etc:
+        if path.startswith(os.sep + "etc"):
+            raise self.severe(
+                'Problems with "%s" directive, prohibited path: %s'
+                % (self.name, path))
+
+        self.arguments[0] = path
+
+        #return super(KernelInclude, self).run() # won't work, see HINTs in _run()
+        return self._run()
+
+    def _run(self):
+        """Include a file as part of the content of this reST file."""
+
+        # HINT: I had to copy&paste the whole Include.run method. I'am not happy
+        # with this, but due to security reasons, the Include.run method does
+        # not allow absolute or relative pathnames pointing to locations *above*
+        # the filesystem tree where the reST document is placed.
+
+        if not self.state.document.settings.file_insertion_enabled:
+            raise self.warning('"%s" directive disabled.' % self.name)
+        source = self.state_machine.input_lines.source(
+            self.lineno - self.state_machine.input_offset - 1)
+        source_dir = os.path.dirname(os.path.abspath(source))
+        path = directives.path(self.arguments[0])
+        if path.startswith('<') and path.endswith('>'):
+            path = os.path.join(self.standard_include_path, path[1:-1])
+        path = os.path.normpath(os.path.join(source_dir, path))
+
+        # HINT: this is the only line I had to change / commented out:
+        #path = utils.relative_path(None, path)
+
+        path = nodes.reprunicode(path)
+        encoding = self.options.get(
+            'encoding', self.state.document.settings.input_encoding)
+        e_handler=self.state.document.settings.input_encoding_error_handler
+        tab_width = self.options.get(
+            'tab-width', self.state.document.settings.tab_width)
+        try:
+            self.state.document.settings.record_dependencies.add(path)
+            include_file = io.FileInput(source_path=path,
+                                        encoding=encoding,
+                                        error_handler=e_handler)
+        except UnicodeEncodeError as error:
+            raise self.severe('Problems with "%s" directive path:\n'
+                              'Cannot encode input file path "%s" '
+                              '(wrong locale?).' %
+                              (self.name, SafeString(path)))
+        except IOError as error:
+            raise self.severe('Problems with "%s" directive path:\n%s.' %
+                      (self.name, ErrorString(error)))
+        startline = self.options.get('start-line', None)
+        endline = self.options.get('end-line', None)
+        try:
+            if startline or (endline is not None):
+                lines = include_file.readlines()
+                rawtext = ''.join(lines[startline:endline])
+            else:
+                rawtext = include_file.read()
+        except UnicodeError as error:
+            raise self.severe('Problem with "%s" directive:\n%s' %
+                              (self.name, ErrorString(error)))
+        # start-after/end-before: no restrictions on newlines in match-text,
+        # and no restrictions on matching inside lines vs. line boundaries
+        after_text = self.options.get('start-after', None)
+        if after_text:
+            # skip content in rawtext before *and incl.* a matching text
+            after_index = rawtext.find(after_text)
+            if after_index < 0:
+                raise self.severe('Problem with "start-after" option of "%s" '
+                                  'directive:\nText not found.' % self.name)
+            rawtext = rawtext[after_index + len(after_text):]
+        before_text = self.options.get('end-before', None)
+        if before_text:
+            # skip content in rawtext after *and incl.* a matching text
+            before_index = rawtext.find(before_text)
+            if before_index < 0:
+                raise self.severe('Problem with "end-before" option of "%s" '
+                                  'directive:\nText not found.' % self.name)
+            rawtext = rawtext[:before_index]
+
+        include_lines = statemachine.string2lines(rawtext, tab_width,
+                                                  convert_whitespace=True)
+        if 'literal' in self.options:
+            # Convert tabs to spaces, if `tab_width` is positive.
+            if tab_width >= 0:
+                text = rawtext.expandtabs(tab_width)
+            else:
+                text = rawtext
+            literal_block = nodes.literal_block(rawtext, source=path,
+                                    classes=self.options.get('class', []))
+            literal_block.line = 1
+            self.add_name(literal_block)
+            if 'number-lines' in self.options:
+                try:
+                    startline = int(self.options['number-lines'] or 1)
+                except ValueError:
+                    raise self.error(':number-lines: with non-integer '
+                                     'start value')
+                endline = startline + len(include_lines)
+                if text.endswith('\n'):
+                    text = text[:-1]
+                tokens = NumberLines([([], text)], startline, endline)
+                for classes, value in tokens:
+                    if classes:
+                        literal_block += nodes.inline(value, value,
+                                                      classes=classes)
+                    else:
+                        literal_block += nodes.Text(value, value)
+            else:
+                literal_block += nodes.Text(text, text)
+            return [literal_block]
+        if 'code' in self.options:
+            self.options['source'] = path
+            codeblock = CodeBlock(self.name,
+                                  [self.options.pop('code')], # arguments
+                                  self.options,
+                                  include_lines, # content
+                                  self.lineno,
+                                  self.content_offset,
+                                  self.block_text,
+                                  self.state,
+                                  self.state_machine)
+            return codeblock.run()
+        self.state_machine.insert_input(include_lines, path)
+        return []

Documentation/sphinx/kerneldoc.py

@@ -0,0 +1,146 @@
+# coding=utf-8
+#
+# Copyright © 2016 Intel Corporation
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+# IN THE SOFTWARE.
+#
+# Authors:
+#    Jani Nikula <jani.nikula@intel.com>
+#
+# Please make sure this works on both python2 and python3.
+#
+
+import codecs
+import os
+import subprocess
+import sys
+import re
+import glob
+
+from docutils import nodes, statemachine
+from docutils.statemachine import ViewList
+from docutils.parsers.rst import directives, Directive
+from sphinx.ext.autodoc import AutodocReporter
+
+__version__  = '1.0'
+
+class KernelDocDirective(Directive):
+    """Extract kernel-doc comments from the specified file"""
+    required_argument = 1
+    optional_arguments = 4
+    option_spec = {
+        'doc': directives.unchanged_required,
+        'functions': directives.unchanged_required,
+        'export': directives.unchanged,
+        'internal': directives.unchanged,
+    }
+    has_content = False
+
+    def run(self):
+        env = self.state.document.settings.env
+        cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno']
+
+        filename = env.config.kerneldoc_srctree + '/' + self.arguments[0]
+        export_file_patterns = []
+
+        # Tell sphinx of the dependency
+        env.note_dependency(os.path.abspath(filename))
+
+        tab_width = self.options.get('tab-width', self.state.document.settings.tab_width)
+
+        # FIXME: make this nicer and more robust against errors
+        if 'export' in self.options:
+            cmd += ['-export']
+            export_file_patterns = str(self.options.get('export')).split()
+        elif 'internal' in self.options:
+            cmd += ['-internal']
+            export_file_patterns = str(self.options.get('internal')).split()
+        elif 'doc' in self.options:
+            cmd += ['-function', str(self.options.get('doc'))]
+        elif 'functions' in self.options:
+            for f in str(self.options.get('functions')).split():
+                cmd += ['-function', f]
+
+        for pattern in export_file_patterns:
+            for f in glob.glob(env.config.kerneldoc_srctree + '/' + pattern):
+                env.note_dependency(os.path.abspath(f))
+                cmd += ['-export-file', f]
+
+        cmd += [filename]
+
+        try:
+            env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd)))
+
+            p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+            out, err = p.communicate()
+
+            out, err = codecs.decode(out, 'utf-8'), codecs.decode(err, 'utf-8')
+
+            if p.returncode != 0:
+                sys.stderr.write(err)
+
+                env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
+                return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
+            elif env.config.kerneldoc_verbosity > 0:
+                sys.stderr.write(err)
+
+            lines = statemachine.string2lines(out, tab_width, convert_whitespace=True)
+            result = ViewList()
+
+            lineoffset = 0;
+            line_regex = re.compile("^#define LINENO ([0-9]+)$")
+            for line in lines:
+                match = line_regex.search(line)
+                if match:
+                    # sphinx counts lines from 0
+                    lineoffset = int(match.group(1)) - 1
+                    # we must eat our comments since the upset the markup
+                else:
+                    result.append(line, filename, lineoffset)
+                    lineoffset += 1
+
+            node = nodes.section()
+            buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
+            self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter)
+            self.state.memo.title_styles, self.state.memo.section_level = [], 0
+            try:
+                self.state.nested_parse(result, 0, node, match_titles=1)
+            finally:
+                self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf
+
+            return node.children
+
+        except Exception as e:  # pylint: disable=W0703
+            env.app.warn('kernel-doc \'%s\' processing failed with: %s' %
+                         (" ".join(cmd), str(e)))
+            return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
+
+def setup(app):
+    app.add_config_value('kerneldoc_bin', None, 'env')
+    app.add_config_value('kerneldoc_srctree', None, 'env')
+    app.add_config_value('kerneldoc_verbosity', 1, 'env')
+
+    app.add_directive('kernel-doc', KernelDocDirective)
+
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )

Documentation/sphinx/kfigure.py

@@ -0,0 +1,551 @@
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=C0103, R0903, R0912, R0915
+u"""
+    scalable figure and image handling
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+    Sphinx extension which implements scalable image handling.
+
+    :copyright:  Copyright (C) 2016  Markus Heiser
+    :license:    GPL Version 2, June 1991 see Linux/COPYING for details.
+
+    The build for image formats depend on image's source format and output's
+    destination format. This extension implement methods to simplify image
+    handling from the author's POV. Directives like ``kernel-figure`` implement
+    methods *to* always get the best output-format even if some tools are not
+    installed. For more details take a look at ``convert_image(...)`` which is
+    the core of all conversions.
+
+    * ``.. kernel-image``: for image handling / a ``.. image::`` replacement
+
+    * ``.. kernel-figure``: for figure handling / a ``.. figure::`` replacement
+
+    * ``.. kernel-render``: for render markup / a concept to embed *render*
+      markups (or languages). Supported markups (see ``RENDER_MARKUP_EXT``)
+
+      - ``DOT``: render embedded Graphviz's **DOC**
+      - ``SVG``: render embedded Scalable Vector Graphics (**SVG**)
+      - ... *developable*
+
+    Used tools:
+
+    * ``dot(1)``: Graphviz (http://www.graphviz.org). If Graphviz is not
+      available, the DOT language is inserted as literal-block.
+
+    * SVG to PDF: To generate PDF, you need at least one of this tools:
+
+      - ``convert(1)``: ImageMagick (https://www.imagemagick.org)
+
+    List of customizations:
+
+    * generate PDF from SVG / used by PDF (LaTeX) builder
+
+    * generate SVG (html-builder) and PDF (latex-builder) from DOT files.
+      DOT: see http://www.graphviz.org/content/dot-language
+
+    """
+
+import os
+from os import path
+import subprocess
+from hashlib import sha1
+import sys
+
+from docutils import nodes
+from docutils.statemachine import ViewList
+from docutils.parsers.rst import directives
+from docutils.parsers.rst.directives import images
+import sphinx
+
+from sphinx.util.nodes import clean_astext
+from six import iteritems
+
+PY3 = sys.version_info[0] == 3
+
+if PY3:
+    _unicode = str
+else:
+    _unicode = unicode
+
+# Get Sphinx version
+major, minor, patch = sphinx.version_info[:3]
+if major == 1 and minor > 3:
+    # patches.Figure only landed in Sphinx 1.4
+    from sphinx.directives.patches import Figure  # pylint: disable=C0413
+else:
+    Figure = images.Figure
+
+__version__  = '1.0.0'
+
+# simple helper
+# -------------
+
+def which(cmd):
+    """Searches the ``cmd`` in the ``PATH`` environment.
+
+    This *which* searches the PATH for executable ``cmd`` . First match is
+    returned, if nothing is found, ``None` is returned.
+    """
+    envpath = os.environ.get('PATH', None) or os.defpath
+    for folder in envpath.split(os.pathsep):
+        fname = folder + os.sep + cmd
+        if path.isfile(fname):
+            return fname
+
+def mkdir(folder, mode=0o775):
+    if not path.isdir(folder):
+        os.makedirs(folder, mode)
+
+def file2literal(fname):
+    with open(fname, "r") as src:
+        data = src.read()
+        node = nodes.literal_block(data, data)
+    return node
+
+def isNewer(path1, path2):
+    """Returns True if ``path1`` is newer than ``path2``
+
+    If ``path1`` exists and is newer than ``path2`` the function returns
+    ``True`` is returned otherwise ``False``
+    """
+    return (path.exists(path1)
+            and os.stat(path1).st_ctime > os.stat(path2).st_ctime)
+
+def pass_handle(self, node):           # pylint: disable=W0613
+    pass
+
+# setup conversion tools and sphinx extension
+# -------------------------------------------
+
+# Graphviz's dot(1) support
+dot_cmd = None
+
+# ImageMagick' convert(1) support
+convert_cmd = None
+
+
+def setup(app):
+    # check toolchain first
+    app.connect('builder-inited', setupTools)
+
+    # image handling
+    app.add_directive("kernel-image",  KernelImage)
+    app.add_node(kernel_image,
+                 html    = (visit_kernel_image, pass_handle),
+                 latex   = (visit_kernel_image, pass_handle),
+                 texinfo = (visit_kernel_image, pass_handle),
+                 text    = (visit_kernel_image, pass_handle),
+                 man     = (visit_kernel_image, pass_handle), )
+
+    # figure handling
+    app.add_directive("kernel-figure", KernelFigure)
+    app.add_node(kernel_figure,
+                 html    = (visit_kernel_figure, pass_handle),
+                 latex   = (visit_kernel_figure, pass_handle),
+                 texinfo = (visit_kernel_figure, pass_handle),
+                 text    = (visit_kernel_figure, pass_handle),
+                 man     = (visit_kernel_figure, pass_handle), )
+
+    # render handling
+    app.add_directive('kernel-render', KernelRender)
+    app.add_node(kernel_render,
+                 html    = (visit_kernel_render, pass_handle),
+                 latex   = (visit_kernel_render, pass_handle),
+                 texinfo = (visit_kernel_render, pass_handle),
+                 text    = (visit_kernel_render, pass_handle),
+                 man     = (visit_kernel_render, pass_handle), )
+
+    app.connect('doctree-read', add_kernel_figure_to_std_domain)
+
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
+
+def setupTools(app):
+    u"""
+    Check available build tools and log some *verbose* messages.
+
+    This function is called once, when the builder is initiated.
+    """
+    global dot_cmd, convert_cmd   # pylint: disable=W0603
+    app.verbose("kfigure: check installed tools ...")
+
+    dot_cmd = which('dot')
+    convert_cmd = which('convert')
+
+    if dot_cmd:
+        app.verbose("use dot(1) from: " + dot_cmd)
+    else:
+        app.warn("dot(1) not found, for better output quality install "
+                 "graphviz from http://www.graphviz.org")
+    if convert_cmd:
+        app.verbose("use convert(1) from: " + convert_cmd)
+    else:
+        app.warn(
+            "convert(1) not found, for SVG to PDF conversion install "
+            "ImageMagick (https://www.imagemagick.org)")
+
+
+# integrate conversion tools
+# --------------------------
+
+RENDER_MARKUP_EXT = {
+    # The '.ext' must be handled by convert_image(..) function's *in_ext* input.
+    # <name> : <.ext>
+    'DOT' : '.dot',
+    'SVG' : '.svg'
+}
+
+def convert_image(img_node, translator, src_fname=None):
+    """Convert a image node for the builder.
+
+    Different builder prefer different image formats, e.g. *latex* builder
+    prefer PDF while *html* builder prefer SVG format for images.
+
+    This function handles output image formats in dependence of source the
+    format (of the image) and the translator's output format.
+    """
+    app = translator.builder.app
+
+    fname, in_ext = path.splitext(path.basename(img_node['uri']))
+    if src_fname is None:
+        src_fname = path.join(translator.builder.srcdir, img_node['uri'])
+        if not path.exists(src_fname):
+            src_fname = path.join(translator.builder.outdir, img_node['uri'])
+
+    dst_fname = None
+
+    # in kernel builds, use 'make SPHINXOPTS=-v' to see verbose messages
+
+    app.verbose('assert best format for: ' + img_node['uri'])
+
+    if in_ext == '.dot':
+
+        if not dot_cmd:
+            app.verbose("dot from graphviz not available / include DOT raw.")
+            img_node.replace_self(file2literal(src_fname))
+
+        elif translator.builder.format == 'latex':
+            dst_fname = path.join(translator.builder.outdir, fname + '.pdf')
+            img_node['uri'] = fname + '.pdf'
+            img_node['candidates'] = {'*': fname + '.pdf'}
+
+
+        elif translator.builder.format == 'html':
+            dst_fname = path.join(
+                translator.builder.outdir,
+                translator.builder.imagedir,
+                fname + '.svg')
+            img_node['uri'] = path.join(
+                translator.builder.imgpath, fname + '.svg')
+            img_node['candidates'] = {
+                '*': path.join(translator.builder.imgpath, fname + '.svg')}
+
+        else:
+            # all other builder formats will include DOT as raw
+            img_node.replace_self(file2literal(src_fname))
+
+    elif in_ext == '.svg':
+
+        if translator.builder.format == 'latex':
+            if convert_cmd is None:
+                app.verbose("no SVG to PDF conversion available / include SVG raw.")
+                img_node.replace_self(file2literal(src_fname))
+            else:
+                dst_fname = path.join(translator.builder.outdir, fname + '.pdf')
+                img_node['uri'] = fname + '.pdf'
+                img_node['candidates'] = {'*': fname + '.pdf'}
+
+    if dst_fname:
+        # the builder needs not to copy one more time, so pop it if exists.
+        translator.builder.images.pop(img_node['uri'], None)
+        _name = dst_fname[len(translator.builder.outdir) + 1:]
+
+        if isNewer(dst_fname, src_fname):
+            app.verbose("convert: {out}/%s already exists and is newer" % _name)
+
+        else:
+            ok = False
+            mkdir(path.dirname(dst_fname))
+
+            if in_ext == '.dot':
+                app.verbose('convert DOT to: {out}/' + _name)
+                ok = dot2format(app, src_fname, dst_fname)
+
+            elif in_ext == '.svg':
+                app.verbose('convert SVG to: {out}/' + _name)
+                ok = svg2pdf(app, src_fname, dst_fname)
+
+            if not ok:
+                img_node.replace_self(file2literal(src_fname))
+
+
+def dot2format(app, dot_fname, out_fname):
+    """Converts DOT file to ``out_fname`` using ``dot(1)``.
+
+    * ``dot_fname`` pathname of the input DOT file, including extension ``.dot``
+    * ``out_fname`` pathname of the output file, including format extension
+
+    The *format extension* depends on the ``dot`` command (see ``man dot``
+    option ``-Txxx``). Normally you will use one of the following extensions:
+
+    - ``.ps`` for PostScript,
+    - ``.svg`` or ``svgz`` for Structured Vector Graphics,
+    - ``.fig`` for XFIG graphics and
+    - ``.png`` or ``gif`` for common bitmap graphics.
+
+    """
+    out_format = path.splitext(out_fname)[1][1:]
+    cmd = [dot_cmd, '-T%s' % out_format, dot_fname]
+    exit_code = 42
+
+    with open(out_fname, "w") as out:
+        exit_code = subprocess.call(cmd, stdout = out)
+        if exit_code != 0:
+            app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
+    return bool(exit_code == 0)
+
+def svg2pdf(app, svg_fname, pdf_fname):
+    """Converts SVG to PDF with ``convert(1)`` command.
+
+    Uses ``convert(1)`` from ImageMagick (https://www.imagemagick.org) for
+    conversion.  Returns ``True`` on success and ``False`` if an error occurred.
+
+    * ``svg_fname`` pathname of the input SVG file with extension (``.svg``)
+    * ``pdf_name``  pathname of the output PDF file with extension (``.pdf``)
+
+    """
+    cmd = [convert_cmd, svg_fname, pdf_fname]
+    # use stdout and stderr from parent
+    exit_code = subprocess.call(cmd)
+    if exit_code != 0:
+        app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
+    return bool(exit_code == 0)
+
+
+# image handling
+# ---------------------
+
+def visit_kernel_image(self, node):    # pylint: disable=W0613
+    """Visitor of the ``kernel_image`` Node.
+
+    Handles the ``image`` child-node with the ``convert_image(...)``.
+    """
+    img_node = node[0]
+    convert_image(img_node, self)
+
+class kernel_image(nodes.image):
+    """Node for ``kernel-image`` directive."""
+    pass
+
+class KernelImage(images.Image):
+    u"""KernelImage directive
+
+    Earns everything from ``.. image::`` directive, except *remote URI* and
+    *glob* pattern. The KernelImage wraps a image node into a
+    kernel_image node. See ``visit_kernel_image``.
+    """
+
+    def run(self):
+        uri = self.arguments[0]
+        if uri.endswith('.*') or uri.find('://') != -1:
+            raise self.severe(
+                'Error in "%s: %s": glob pattern and remote images are not allowed'
+                % (self.name, uri))
+        result = images.Image.run(self)
+        if len(result) == 2 or isinstance(result[0], nodes.system_message):
+            return result
+        (image_node,) = result
+        # wrap image node into a kernel_image node / see visitors
+        node = kernel_image('', image_node)
+        return [node]
+
+# figure handling
+# ---------------------
+
+def visit_kernel_figure(self, node):   # pylint: disable=W0613
+    """Visitor of the ``kernel_figure`` Node.
+
+    Handles the ``image`` child-node with the ``convert_image(...)``.
+    """
+    img_node = node[0][0]
+    convert_image(img_node, self)
+
+class kernel_figure(nodes.figure):
+    """Node for ``kernel-figure`` directive."""
+
+class KernelFigure(Figure):
+    u"""KernelImage directive
+
+    Earns everything from ``.. figure::`` directive, except *remote URI* and
+    *glob* pattern.  The KernelFigure wraps a figure node into a kernel_figure
+    node. See ``visit_kernel_figure``.
+    """
+
+    def run(self):
+        uri = self.arguments[0]
+        if uri.endswith('.*') or uri.find('://') != -1:
+            raise self.severe(
+                'Error in "%s: %s":'
+                ' glob pattern and remote images are not allowed'
+                % (self.name, uri))
+        result = Figure.run(self)
+        if len(result) == 2 or isinstance(result[0], nodes.system_message):
+            return result
+        (figure_node,) = result
+        # wrap figure node into a kernel_figure node / see visitors
+        node = kernel_figure('', figure_node)
+        return [node]
+
+
+# render handling
+# ---------------------
+
+def visit_kernel_render(self, node):
+    """Visitor of the ``kernel_render`` Node.
+
+    If rendering tools available, save the markup of the ``literal_block`` child
+    node into a file and replace the ``literal_block`` node with a new created
+    ``image`` node, pointing to the saved markup file. Afterwards, handle the
+    image child-node with the ``convert_image(...)``.
+    """
+    app = self.builder.app
+    srclang = node.get('srclang')
+
+    app.verbose('visit kernel-render node lang: "%s"' % (srclang))
+
+    tmp_ext = RENDER_MARKUP_EXT.get(srclang, None)
+    if tmp_ext is None:
+        app.warn('kernel-render: "%s" unknown / include raw.' % (srclang))
+        return
+
+    if not dot_cmd and tmp_ext == '.dot':
+        app.verbose("dot from graphviz not available / include raw.")
+        return
+
+    literal_block = node[0]
+
+    code      = literal_block.astext()
+    hashobj   = code.encode('utf-8') #  str(node.attributes)
+    fname     = path.join('%s-%s' % (srclang, sha1(hashobj).hexdigest()))
+
+    tmp_fname = path.join(
+        self.builder.outdir, self.builder.imagedir, fname + tmp_ext)
+
+    if not path.isfile(tmp_fname):
+        mkdir(path.dirname(tmp_fname))
+        with open(tmp_fname, "w") as out:
+            out.write(code)
+
+    img_node = nodes.image(node.rawsource, **node.attributes)
+    img_node['uri'] = path.join(self.builder.imgpath, fname + tmp_ext)
+    img_node['candidates'] = {
+        '*': path.join(self.builder.imgpath, fname + tmp_ext)}
+
+    literal_block.replace_self(img_node)
+    convert_image(img_node, self, tmp_fname)
+
+
+class kernel_render(nodes.General, nodes.Inline, nodes.Element):
+    """Node for ``kernel-render`` directive."""
+    pass
+
+class KernelRender(Figure):
+    u"""KernelRender directive
+
+    Render content by external tool.  Has all the options known from the
+    *figure*  directive, plus option ``caption``.  If ``caption`` has a
+    value, a figure node with the *caption* is inserted. If not, a image node is
+    inserted.
+
+    The KernelRender directive wraps the text of the directive into a
+    literal_block node and wraps it into a kernel_render node. See
+    ``visit_kernel_render``.
+    """
+    has_content = True
+    required_arguments = 1
+    optional_arguments = 0
+    final_argument_whitespace = False
+
+    # earn options from 'figure'
+    option_spec = Figure.option_spec.copy()
+    option_spec['caption'] = directives.unchanged
+
+    def run(self):
+        return [self.build_node()]
+
+    def build_node(self):
+
+        srclang = self.arguments[0].strip()
+        if srclang not in RENDER_MARKUP_EXT.keys():
+            return [self.state_machine.reporter.warning(
+                'Unknown source language "%s", use one of: %s.' % (
+                    srclang, ",".join(RENDER_MARKUP_EXT.keys())),
+                line=self.lineno)]
+
+        code = '\n'.join(self.content)
+        if not code.strip():
+            return [self.state_machine.reporter.warning(
+                'Ignoring "%s" directive without content.' % (
+                    self.name),
+                line=self.lineno)]
+
+        node = kernel_render()
+        node['alt'] = self.options.get('alt','')
+        node['srclang'] = srclang
+        literal_node = nodes.literal_block(code, code)
+        node += literal_node
+
+        caption = self.options.get('caption')
+        if caption:
+            # parse caption's content
+            parsed = nodes.Element()
+            self.state.nested_parse(
+                ViewList([caption], source=''), self.content_offset, parsed)
+            caption_node = nodes.caption(
+                parsed[0].rawsource, '', *parsed[0].children)
+            caption_node.source = parsed[0].source
+            caption_node.line = parsed[0].line
+
+            figure_node = nodes.figure('', node)
+            for k,v in self.options.items():
+                figure_node[k] = v
+            figure_node += caption_node
+
+            node = figure_node
+
+        return node
+
+def add_kernel_figure_to_std_domain(app, doctree):
+    """Add kernel-figure anchors to 'std' domain.
+
+    The ``StandardDomain.process_doc(..)`` method does not know how to resolve
+    the caption (label) of ``kernel-figure`` directive (it only knows about
+    standard nodes, e.g. table, figure etc.). Without any additional handling
+    this will result in a 'undefined label' for kernel-figures.
+
+    This handle adds labels of kernel-figure to the 'std' domain labels.
+    """
+
+    std = app.env.domains["std"]
+    docname = app.env.docname
+    labels = std.data["labels"]
+
+    for name, explicit in iteritems(doctree.nametypes):
+        if not explicit:
+            continue
+        labelid = doctree.nameids[name]
+        if labelid is None:
+            continue
+        node = doctree.ids[labelid]
+
+        if node.tagname == 'kernel_figure':
+            for n in node.next_node():
+                if n.tagname == 'caption':
+                    sectname = clean_astext(n)
+                    # add label to std domain
+                    labels[name] = docname, labelid, sectname
+                    break

Documentation/sphinx/load_config.py

@@ -0,0 +1,32 @@
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=R0903, C0330, R0914, R0912, E0401
+
+import os
+import sys
+from sphinx.util.pycompat import execfile_
+
+# ------------------------------------------------------------------------------
+def loadConfig(namespace):
+# ------------------------------------------------------------------------------
+
+    u"""Load an additional configuration file into *namespace*.
+
+    The name of the configuration file is taken from the environment
+    ``SPHINX_CONF``. The external configuration file extends (or overwrites) the
+    configuration values from the origin ``conf.py``.  With this you are able to
+    maintain *build themes*.  """
+
+    config_file = os.environ.get("SPHINX_CONF", None)
+    if (config_file is not None
+        and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ):
+        config_file = os.path.abspath(config_file)
+
+        if os.path.isfile(config_file):
+            sys.stdout.write("load additional sphinx-config: %s\n" % config_file)
+            config = namespace.copy()
+            config['__file__'] = config_file
+            execfile_(config_file, config)
+            del config['__file__']
+            namespace.update(config)
+        else:
+            sys.stderr.write("WARNING: additional sphinx-config not found: %s\n" % config_file)

Documentation/sphinx/parse-headers.pl

@@ -0,0 +1,401 @@
+#!/usr/bin/perl
+use strict;
+use Text::Tabs;
+use Getopt::Long;
+use Pod::Usage;
+
+my $debug;
+my $help;
+my $man;
+
+GetOptions(
+	"debug" => \$debug,
+	'usage|?' => \$help,
+	'help' => \$man
+) or pod2usage(2);
+
+pod2usage(1) if $help;
+pod2usage(-exitstatus => 0, -verbose => 2) if $man;
+pod2usage(2) if (scalar @ARGV < 2 || scalar @ARGV > 3);
+
+my ($file_in, $file_out, $file_exceptions) = @ARGV;
+
+my $data;
+my %ioctls;
+my %defines;
+my %typedefs;
+my %enums;
+my %enum_symbols;
+my %structs;
+
+require Data::Dumper if ($debug);
+
+#
+# read the file and get identifiers
+#
+
+my $is_enum = 0;
+my $is_comment = 0;
+open IN, $file_in or die "Can't open $file_in";
+while (<IN>) {
+	$data .= $_;
+
+	my $ln = $_;
+	if (!$is_comment) {
+		$ln =~ s,/\*.*(\*/),,g;
+
+		$is_comment = 1 if ($ln =~ s,/\*.*,,);
+	} else {
+		if ($ln =~ s,^(.*\*/),,) {
+			$is_comment = 0;
+		} else {
+			next;
+		}
+	}
+
+	if ($is_enum && $ln =~ m/^\s*([_\w][\w\d_]+)\s*[\,=]?/) {
+		my $s = $1;
+		my $n = $1;
+		$n =~ tr/A-Z/a-z/;
+		$n =~ tr/_/-/;
+
+		$enum_symbols{$s} =  "\\ :ref:`$s <$n>`\\ ";
+
+		$is_enum = 0 if ($is_enum && m/\}/);
+		next;
+	}
+	$is_enum = 0 if ($is_enum && m/\}/);
+
+	if ($ln =~ m/^\s*#\s*define\s+([_\w][\w\d_]+)\s+_IO/) {
+		my $s = $1;
+		my $n = $1;
+		$n =~ tr/A-Z/a-z/;
+
+		$ioctls{$s} = "\\ :ref:`$s <$n>`\\ ";
+		next;
+	}
+
+	if ($ln =~ m/^\s*#\s*define\s+([_\w][\w\d_]+)\s+/) {
+		my $s = $1;
+		my $n = $1;
+		$n =~ tr/A-Z/a-z/;
+		$n =~ tr/_/-/;
+
+		$defines{$s} = "\\ :ref:`$s <$n>`\\ ";
+		next;
+	}
+
+	if ($ln =~ m/^\s*typedef\s+([_\w][\w\d_]+)\s+(.*)\s+([_\w][\w\d_]+);/) {
+		my $s = $2;
+		my $n = $3;
+
+		$typedefs{$n} = "\\ :c:type:`$n <$s>`\\ ";
+		next;
+	}
+	if ($ln =~ m/^\s*enum\s+([_\w][\w\d_]+)\s+\{/
+	    || $ln =~ m/^\s*enum\s+([_\w][\w\d_]+)$/
+	    || $ln =~ m/^\s*typedef\s*enum\s+([_\w][\w\d_]+)\s+\{/
+	    || $ln =~ m/^\s*typedef\s*enum\s+([_\w][\w\d_]+)$/) {
+		my $s = $1;
+
+		$enums{$s} =  "enum :c:type:`$s`\\ ";
+
+		$is_enum = $1;
+		next;
+	}
+	if ($ln =~ m/^\s*struct\s+([_\w][\w\d_]+)\s+\{/
+	    || $ln =~ m/^\s*struct\s+([[_\w][\w\d_]+)$/
+	    || $ln =~ m/^\s*typedef\s*struct\s+([_\w][\w\d_]+)\s+\{/
+	    || $ln =~ m/^\s*typedef\s*struct\s+([[_\w][\w\d_]+)$/
+	    ) {
+		my $s = $1;
+
+		$structs{$s} = "struct :c:type:`$s`\\ ";
+		next;
+	}
+}
+close IN;
+
+#
+# Handle multi-line typedefs
+#
+
+my @matches = ($data =~ m/typedef\s+struct\s+\S+?\s*\{[^\}]+\}\s*(\S+)\s*\;/g,
+	       $data =~ m/typedef\s+enum\s+\S+?\s*\{[^\}]+\}\s*(\S+)\s*\;/g,);
+foreach my $m (@matches) {
+	my $s = $m;
+
+	$typedefs{$s} = "\\ :c:type:`$s`\\ ";
+	next;
+}
+
+#
+# Handle exceptions, if any
+#
+
+my %def_reftype = (
+	"ioctl"   => ":ref",
+	"define"  => ":ref",
+	"symbol"  => ":ref",
+	"typedef" => ":c:type",
+	"enum"    => ":c:type",
+	"struct"  => ":c:type",
+);
+
+if ($file_exceptions) {
+	open IN, $file_exceptions or die "Can't read $file_exceptions";
+	while (<IN>) {
+		next if (m/^\s*$/ || m/^\s*#/);
+
+		# Parsers to ignore a symbol
+
+		if (m/^ignore\s+ioctl\s+(\S+)/) {
+			delete $ioctls{$1} if (exists($ioctls{$1}));
+			next;
+		}
+		if (m/^ignore\s+define\s+(\S+)/) {
+			delete $defines{$1} if (exists($defines{$1}));
+			next;
+		}
+		if (m/^ignore\s+typedef\s+(\S+)/) {
+			delete $typedefs{$1} if (exists($typedefs{$1}));
+			next;
+		}
+		if (m/^ignore\s+enum\s+(\S+)/) {
+			delete $enums{$1} if (exists($enums{$1}));
+			next;
+		}
+		if (m/^ignore\s+struct\s+(\S+)/) {
+			delete $structs{$1} if (exists($structs{$1}));
+			next;
+		}
+		if (m/^ignore\s+symbol\s+(\S+)/) {
+			delete $enum_symbols{$1} if (exists($enum_symbols{$1}));
+			next;
+		}
+
+		# Parsers to replace a symbol
+		my ($type, $old, $new, $reftype);
+
+		if (m/^replace\s+(\S+)\s+(\S+)\s+(\S+)/) {
+			$type = $1;
+			$old = $2;
+			$new = $3;
+		} else {
+			die "Can't parse $file_exceptions: $_";
+		}
+
+		if ($new =~ m/^\:c\:(data|func|macro|type)\:\`(.+)\`/) {
+			$reftype = ":c:$1";
+			$new = $2;
+		} elsif ($new =~ m/\:ref\:\`(.+)\`/) {
+			$reftype = ":ref";
+			$new = $1;
+		} else {
+			$reftype = $def_reftype{$type};
+		}
+		$new = "$reftype:`$old <$new>`";
+
+		if ($type eq "ioctl") {
+			$ioctls{$old} = $new if (exists($ioctls{$old}));
+			next;
+		}
+		if ($type eq "define") {
+			$defines{$old} = $new if (exists($defines{$old}));
+			next;
+		}
+		if ($type eq "symbol") {
+			$enum_symbols{$old} = $new if (exists($enum_symbols{$old}));
+			next;
+		}
+		if ($type eq "typedef") {
+			$typedefs{$old} = $new if (exists($typedefs{$old}));
+			next;
+		}
+		if ($type eq "enum") {
+			$enums{$old} = $new if (exists($enums{$old}));
+			next;
+		}
+		if ($type eq "struct") {
+			$structs{$old} = $new if (exists($structs{$old}));
+			next;
+		}
+
+		die "Can't parse $file_exceptions: $_";
+	}
+}
+
+if ($debug) {
+	print Data::Dumper->Dump([\%ioctls], [qw(*ioctls)]) if (%ioctls);
+	print Data::Dumper->Dump([\%typedefs], [qw(*typedefs)]) if (%typedefs);
+	print Data::Dumper->Dump([\%enums], [qw(*enums)]) if (%enums);
+	print Data::Dumper->Dump([\%structs], [qw(*structs)]) if (%structs);
+	print Data::Dumper->Dump([\%defines], [qw(*defines)]) if (%defines);
+	print Data::Dumper->Dump([\%enum_symbols], [qw(*enum_symbols)]) if (%enum_symbols);
+}
+
+#
+# Align block
+#
+$data = expand($data);
+$data = "    " . $data;
+$data =~ s/\n/\n    /g;
+$data =~ s/\n\s+$/\n/g;
+$data =~ s/\n\s+\n/\n\n/g;
+
+#
+# Add escape codes for special characters
+#
+$data =~ s,([\_\`\*\<\>\&\\\\:\/\|\%\$\#\{\}\~\^]),\\$1,g;
+
+$data =~ s,DEPRECATED,**DEPRECATED**,g;
+
+#
+# Add references
+#
+
+my $start_delim = "[ \n\t\(\=\*\@]";
+my $end_delim = "(\\s|,|\\\\=|\\\\:|\\;|\\\)|\\}|\\{)";
+
+foreach my $r (keys %ioctls) {
+	my $s = $ioctls{$r};
+
+	$r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g;
+
+	print "$r -> $s\n" if ($debug);
+
+	$data =~ s/($start_delim)($r)$end_delim/$1$s$3/g;
+}
+
+foreach my $r (keys %defines) {
+	my $s = $defines{$r};
+
+	$r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g;
+
+	print "$r -> $s\n" if ($debug);
+
+	$data =~ s/($start_delim)($r)$end_delim/$1$s$3/g;
+}
+
+foreach my $r (keys %enum_symbols) {
+	my $s = $enum_symbols{$r};
+
+	$r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g;
+
+	print "$r -> $s\n" if ($debug);
+
+	$data =~ s/($start_delim)($r)$end_delim/$1$s$3/g;
+}
+
+foreach my $r (keys %enums) {
+	my $s = $enums{$r};
+
+	$r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g;
+
+	print "$r -> $s\n" if ($debug);
+
+	$data =~ s/enum\s+($r)$end_delim/$s$2/g;
+}
+
+foreach my $r (keys %structs) {
+	my $s = $structs{$r};
+
+	$r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g;
+
+	print "$r -> $s\n" if ($debug);
+
+	$data =~ s/struct\s+($r)$end_delim/$s$2/g;
+}
+
+foreach my $r (keys %typedefs) {
+	my $s = $typedefs{$r};
+
+	$r =~ s,([\_\`\*\<\>\&\\\\:\/]),\\\\$1,g;
+
+	print "$r -> $s\n" if ($debug);
+	$data =~ s/($start_delim)($r)$end_delim/$1$s$3/g;
+}
+
+$data =~ s/\\ ([\n\s])/\1/g;
+
+#
+# Generate output file
+#
+
+my $title = $file_in;
+$title =~ s,.*/,,;
+
+open OUT, "> $file_out" or die "Can't open $file_out";
+print OUT ".. -*- coding: utf-8; mode: rst -*-\n\n";
+print OUT "$title\n";
+print OUT "=" x length($title);
+print OUT "\n\n.. parsed-literal::\n\n";
+print OUT $data;
+close OUT;
+
+__END__
+
+=head1 NAME
+
+parse_headers.pl - parse a C file, in order to identify functions, structs,
+enums and defines and create cross-references to a Sphinx book.
+
+=head1 SYNOPSIS
+
+B<parse_headers.pl> [<options>] <C_FILE> <OUT_FILE> [<EXCEPTIONS_FILE>]
+
+Where <options> can be: --debug, --help or --man.
+
+=head1 OPTIONS
+
+=over 8
+
+=item B<--debug>
+
+Put the script in verbose mode, useful for debugging.
+
+=item B<--usage>
+
+Prints a brief help message and exits.
+
+=item B<--help>
+
+Prints a more detailed help message and exits.
+
+=back
+
+=head1 DESCRIPTION
+
+Convert a C header or source file (C_FILE), into a ReStructured Text
+included via ..parsed-literal block with cross-references for the
+documentation files that describe the API. It accepts an optional
+EXCEPTIONS_FILE with describes what elements will be either ignored or
+be pointed to a non-default reference.
+
+The output is written at the (OUT_FILE).
+
+It is capable of identifying defines, functions, structs, typedefs,
+enums and enum symbols and create cross-references for all of them.
+It is also capable of distinguish #define used for specifying a Linux
+ioctl.
+
+The EXCEPTIONS_FILE contain two rules to allow ignoring a symbol or
+to replace the default references by a custom one.
+
+Please read Documentation/doc-guide/parse-headers.rst at the Kernel's
+tree for more details.
+
+=head1 BUGS
+
+Report bugs to Mauro Carvalho Chehab <mchehab@kernel.org>
+
+=head1 COPYRIGHT
+
+Copyright (c) 2016 by Mauro Carvalho Chehab <mchehab+samsung@kernel.org>.
+
+License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
+
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+
+=cut

Documentation/sphinx/requirements.txt

@@ -0,0 +1,3 @@
+docutils==0.12
+Sphinx==1.4.9
+sphinx_rtd_theme

Documentation/sphinx/rstFlatTable.py

@@ -0,0 +1,376 @@
+#!/usr/bin/env python3
+# -*- coding: utf-8; mode: python -*-
+# pylint: disable=C0330, R0903, R0912
+
+u"""
+    flat-table
+    ~~~~~~~~~~
+
+    Implementation of the ``flat-table`` reST-directive.
+
+    :copyright:  Copyright (C) 2016  Markus Heiser
+    :license:    GPL Version 2, June 1991 see linux/COPYING for details.
+
+    The ``flat-table`` (:py:class:`FlatTable`) is a double-stage list similar to
+    the ``list-table`` with some additional features:
+
+    * *column-span*: with the role ``cspan`` a cell can be extended through
+      additional columns
+
+    * *row-span*: with the role ``rspan`` a cell can be extended through
+      additional rows
+
+    * *auto span* rightmost cell of a table row over the missing cells on the
+      right side of that table-row.  With Option ``:fill-cells:`` this behavior
+      can changed from *auto span* to *auto fill*, which automaticly inserts
+      (empty) cells instead of spanning the last cell.
+
+    Options:
+
+    * header-rows:   [int] count of header rows
+    * stub-columns:  [int] count of stub columns
+    * widths:        [[int] [int] ... ] widths of columns
+    * fill-cells:    instead of autospann missing cells, insert missing cells
+
+    roles:
+
+    * cspan: [int] additionale columns (*morecols*)
+    * rspan: [int] additionale rows (*morerows*)
+"""
+
+# ==============================================================================
+# imports
+# ==============================================================================
+
+import sys
+
+from docutils import nodes
+from docutils.parsers.rst import directives, roles
+from docutils.parsers.rst.directives.tables import Table
+from docutils.utils import SystemMessagePropagation
+
+# ==============================================================================
+# common globals
+# ==============================================================================
+
+# The version numbering follows numbering of the specification
+# (Documentation/books/kernel-doc-HOWTO).
+__version__  = '1.0'
+
+PY3 = sys.version_info[0] == 3
+PY2 = sys.version_info[0] == 2
+
+if PY3:
+    # pylint: disable=C0103, W0622
+    unicode     = str
+    basestring  = str
+
+# ==============================================================================
+def setup(app):
+# ==============================================================================
+
+    app.add_directive("flat-table", FlatTable)
+    roles.register_local_role('cspan', c_span)
+    roles.register_local_role('rspan', r_span)
+
+    return dict(
+        version = __version__,
+        parallel_read_safe = True,
+        parallel_write_safe = True
+    )
+
+# ==============================================================================
+def c_span(name, rawtext, text, lineno, inliner, options=None, content=None):
+# ==============================================================================
+    # pylint: disable=W0613
+
+    options  = options if options is not None else {}
+    content  = content if content is not None else []
+    nodelist = [colSpan(span=int(text))]
+    msglist  = []
+    return nodelist, msglist
+
+# ==============================================================================
+def r_span(name, rawtext, text, lineno, inliner, options=None, content=None):
+# ==============================================================================
+    # pylint: disable=W0613
+
+    options  = options if options is not None else {}
+    content  = content if content is not None else []
+    nodelist = [rowSpan(span=int(text))]
+    msglist  = []
+    return nodelist, msglist
+
+
+# ==============================================================================
+class rowSpan(nodes.General, nodes.Element): pass # pylint: disable=C0103,C0321
+class colSpan(nodes.General, nodes.Element): pass # pylint: disable=C0103,C0321
+# ==============================================================================
+
+# ==============================================================================
+class FlatTable(Table):
+# ==============================================================================
+
+    u"""FlatTable (``flat-table``) directive"""
+
+    option_spec = {
+        'name': directives.unchanged
+        , 'class': directives.class_option
+        , 'header-rows': directives.nonnegative_int
+        , 'stub-columns': directives.nonnegative_int
+        , 'widths': directives.positive_int_list
+        , 'fill-cells' : directives.flag }
+
+    def run(self):
+
+        if not self.content:
+            error = self.state_machine.reporter.error(
+                'The "%s" directive is empty; content required.' % self.name,
+                nodes.literal_block(self.block_text, self.block_text),
+                line=self.lineno)
+            return [error]
+
+        title, messages = self.make_title()
+        node = nodes.Element()          # anonymous container for parsing
+        self.state.nested_parse(self.content, self.content_offset, node)
+
+        tableBuilder = ListTableBuilder(self)
+        tableBuilder.parseFlatTableNode(node)
+        tableNode = tableBuilder.buildTableNode()
+        # SDK.CONSOLE()  # print --> tableNode.asdom().toprettyxml()
+        if title:
+            tableNode.insert(0, title)
+        return [tableNode] + messages
+
+
+# ==============================================================================
+class ListTableBuilder(object):
+# ==============================================================================
+
+    u"""Builds a table from a double-stage list"""
+
+    def __init__(self, directive):
+        self.directive = directive
+        self.rows      = []
+        self.max_cols  = 0
+
+    def buildTableNode(self):
+
+        colwidths    = self.directive.get_column_widths(self.max_cols)
+        if isinstance(colwidths, tuple):
+            # Since docutils 0.13, get_column_widths returns a (widths,
+            # colwidths) tuple, where widths is a string (i.e. 'auto').
+            # See https://sourceforge.net/p/docutils/patches/120/.
+            colwidths = colwidths[1]
+        stub_columns = self.directive.options.get('stub-columns', 0)
+        header_rows  = self.directive.options.get('header-rows', 0)
+
+        table = nodes.table()
+        tgroup = nodes.tgroup(cols=len(colwidths))
+        table += tgroup
+
+
+        for colwidth in colwidths:
+            colspec = nodes.colspec(colwidth=colwidth)
+            # FIXME: It seems, that the stub method only works well in the
+            # absence of rowspan (observed by the html buidler, the docutils-xml
+            # build seems OK).  This is not extraordinary, because there exists
+            # no table directive (except *this* flat-table) which allows to
+            # define coexistent of rowspan and stubs (there was no use-case
+            # before flat-table). This should be reviewed (later).
+            if stub_columns:
+                colspec.attributes['stub'] = 1
+                stub_columns -= 1
+            tgroup += colspec
+        stub_columns = self.directive.options.get('stub-columns', 0)
+
+        if header_rows:
+            thead = nodes.thead()
+            tgroup += thead
+            for row in self.rows[:header_rows]:
+                thead += self.buildTableRowNode(row)
+
+        tbody = nodes.tbody()
+        tgroup += tbody
+
+        for row in self.rows[header_rows:]:
+            tbody += self.buildTableRowNode(row)
+        return table
+
+    def buildTableRowNode(self, row_data, classes=None):
+        classes = [] if classes is None else classes
+        row = nodes.row()
+        for cell in row_data:
+            if cell is None:
+                continue
+            cspan, rspan, cellElements = cell
+
+            attributes = {"classes" : classes}
+            if rspan:
+                attributes['morerows'] = rspan
+            if cspan:
+                attributes['morecols'] = cspan
+            entry = nodes.entry(**attributes)
+            entry.extend(cellElements)
+            row += entry
+        return row
+
+    def raiseError(self, msg):
+        error =  self.directive.state_machine.reporter.error(
+            msg
+            , nodes.literal_block(self.directive.block_text
+                                  , self.directive.block_text)
+            , line = self.directive.lineno )
+        raise SystemMessagePropagation(error)
+
+    def parseFlatTableNode(self, node):
+        u"""parses the node from a :py:class:`FlatTable` directive's body"""
+
+        if len(node) != 1 or not isinstance(node[0], nodes.bullet_list):
+            self.raiseError(
+                'Error parsing content block for the "%s" directive: '
+                'exactly one bullet list expected.' % self.directive.name )
+
+        for rowNum, rowItem in enumerate(node[0]):
+            row = self.parseRowItem(rowItem, rowNum)
+            self.rows.append(row)
+        self.roundOffTableDefinition()
+
+    def roundOffTableDefinition(self):
+        u"""Round off the table definition.
+
+        This method rounds off the table definition in :py:member:`rows`.
+
+        * This method inserts the needed ``None`` values for the missing cells
+        arising from spanning cells over rows and/or columns.
+
+        * recount the :py:member:`max_cols`
+
+        * Autospan or fill (option ``fill-cells``) missing cells on the right
+          side of the table-row
+        """
+
+        y = 0
+        while y < len(self.rows):
+            x = 0
+
+            while x < len(self.rows[y]):
+                cell = self.rows[y][x]
+                if cell is None:
+                    x += 1
+                    continue
+                cspan, rspan = cell[:2]
+                # handle colspan in current row
+                for c in range(cspan):
+                    try:
+                        self.rows[y].insert(x+c+1, None)
+                    except: # pylint: disable=W0702
+                        # the user sets ambiguous rowspans
+                        pass # SDK.CONSOLE()
+                # handle colspan in spanned rows
+                for r in range(rspan):
+                    for c in range(cspan + 1):
+                        try:
+                            self.rows[y+r+1].insert(x+c, None)
+                        except: # pylint: disable=W0702
+                            # the user sets ambiguous rowspans
+                            pass # SDK.CONSOLE()
+                x += 1
+            y += 1
+
+        # Insert the missing cells on the right side. For this, first
+        # re-calculate the max columns.
+
+        for row in self.rows:
+            if self.max_cols < len(row):
+                self.max_cols = len(row)
+
+        # fill with empty cells or cellspan?
+
+        fill_cells = False
+        if 'fill-cells' in self.directive.options:
+            fill_cells = True
+
+        for row in self.rows:
+            x =  self.max_cols - len(row)
+            if x and not fill_cells:
+                if row[-1] is None:
+                    row.append( ( x - 1, 0, []) )
+                else:
+                    cspan, rspan, content = row[-1]
+                    row[-1] = (cspan + x, rspan, content)
+            elif x and fill_cells:
+                for i in range(x):
+                    row.append( (0, 0, nodes.comment()) )
+
+    def pprint(self):
+        # for debugging
+        retVal = "[   "
+        for row in self.rows:
+            retVal += "[ "
+            for col in row:
+                if col is None:
+                    retVal += ('%r' % col)
+                    retVal += "\n    , "
+                else:
+                    content = col[2][0].astext()
+                    if len (content) > 30:
+                        content = content[:30] + "..."
+                    retVal += ('(cspan=%s, rspan=%s, %r)'
+                               % (col[0], col[1], content))
+                    retVal += "]\n    , "
+            retVal = retVal[:-2]
+            retVal += "]\n  , "
+        retVal = retVal[:-2]
+        return retVal + "]"
+
+    def parseRowItem(self, rowItem, rowNum):
+        row = []
+        childNo = 0
+        error   = False
+        cell    = None
+        target  = None
+
+        for child in rowItem:
+            if (isinstance(child , nodes.comment)
+                or isinstance(child, nodes.system_message)):
+                pass
+            elif isinstance(child , nodes.target):
+                target = child
+            elif isinstance(child, nodes.bullet_list):
+                childNo += 1
+                cell = child
+            else:
+                error = True
+                break
+
+        if childNo != 1 or error:
+            self.raiseError(
+                'Error parsing content block for the "%s" directive: '
+                'two-level bullet list expected, but row %s does not '
+                'contain a second-level bullet list.'
+                % (self.directive.name, rowNum + 1))
+
+        for cellItem in cell:
+            cspan, rspan, cellElements = self.parseCellItem(cellItem)
+            if target is not None:
+                cellElements.insert(0, target)
+            row.append( (cspan, rspan, cellElements) )
+        return row
+
+    def parseCellItem(self, cellItem):
+        # search and remove cspan, rspan colspec from the first element in
+        # this listItem (field).
+        cspan = rspan = 0
+        if not len(cellItem):
+            return cspan, rspan, []
+        for elem in cellItem[0]:
+            if isinstance(elem, colSpan):
+                cspan = elem.get("span")
+                elem.parent.remove(elem)
+                continue
+            if isinstance(elem, rowSpan):
+                rspan = elem.get("span")
+                elem.parent.remove(elem)
+                continue
+        return cspan, rspan, cellItem[:]

Kconfig

@@ -68,25 +68,25 @@ config CC_COVERAGE
 
 config DISTRO_DEFAULTS
 	bool "Select defaults suitable for booting general purpose Linux distributions"
-	imply USE_BOOTCOMMAND
-	select CMD_BOOTZ if ARM && !ARM64
+	select AUTO_COMPLETE
+	select CMDLINE_EDITING
 	select CMD_BOOTI if ARM64
+	select CMD_BOOTZ if ARM && !ARM64
 	select CMD_DHCP if CMD_NET
-	select CMD_PING if CMD_NET
-	select CMD_PXE if NET
 	select CMD_ENV_EXISTS
 	select CMD_EXT2
 	select CMD_EXT4
 	select CMD_FAT
 	select CMD_FS_GENERIC
-	imply CMD_MII if NET
 	select CMD_PART if PARTITIONS
-	select HUSH_PARSER
-	select CMDLINE_EDITING
-	select AUTO_COMPLETE
-	select SYS_LONGHELP
-	select SUPPORT_RAW_INITRD
+	select CMD_PING if CMD_NET
+	select CMD_PXE if NET
 	select ENV_VARS_UBOOT_CONFIG
+	select HUSH_PARSER
+	select SUPPORT_RAW_INITRD
+	select SYS_LONGHELP
+	imply CMD_MII if NET
+	imply USE_BOOTCOMMAND
 	help
 	  Select this to enable various options and commands which are suitable
 	  for building u-boot for booting general purpose Linux distributions.
@@ -104,6 +104,12 @@ config ENV_VARS_UBOOT_CONFIG
 	  - CONFIG_SYS_VENDOR
 	  - CONFIG_SYS_SOC
 
+config NR_DRAM_BANKS
+	int "Number of DRAM banks"
+	default 4
+	help
+	  This defines the number of DRAM banks.
+
 config SYS_BOOT_GET_CMDLINE
 	bool "Enable kernel command line setup"
 	help
@@ -136,25 +142,32 @@ config SYS_MALLOC_F_LEN
 	  particular needs this to operate, so that it can allocate the
 	  initial serial device and any others that are needed.
 
+config SYS_MALLOC_LEN
+	hex "Define memory for Dynamic allocation"
+	depends on ARCH_ZYNQ
+	help
+	  This defines memory to be allocated for Dynamic allocation
+	  TODO: Use for other architectures
+
 config SPL_SYS_MALLOC_F_LEN
-        hex "Size of malloc() pool in SPL before relocation"
-        depends on SYS_MALLOC_F
-        default SYS_MALLOC_F_LEN
-        help
-          Before relocation, memory is very limited on many platforms. Still,
-          we can provide a small malloc() pool if needed. Driver model in
-          particular needs this to operate, so that it can allocate the
-          initial serial device and any others that are needed.
+	hex "Size of malloc() pool in SPL before relocation"
+	depends on SYS_MALLOC_F
+	default SYS_MALLOC_F_LEN
+	help
+	  Before relocation, memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
 
 config TPL_SYS_MALLOC_F_LEN
-        hex "Size of malloc() pool in TPL before relocation"
-        depends on SYS_MALLOC_F
-        default SYS_MALLOC_F_LEN
-        help
-          Before relocation, memory is very limited on many platforms. Still,
-          we can provide a small malloc() pool if needed. Driver model in
-          particular needs this to operate, so that it can allocate the
-          initial serial device and any others that are needed.
+	hex "Size of malloc() pool in TPL before relocation"
+	depends on SYS_MALLOC_F
+	default SYS_MALLOC_F_LEN
+	help
+	  Before relocation, memory is very limited on many platforms. Still,
+	  we can provide a small malloc() pool if needed. Driver model in
+	  particular needs this to operate, so that it can allocate the
+	  initial serial device and any others that are needed.
 
 menuconfig EXPERT
 	bool "Configure standard U-Boot features (expert users)"
@@ -237,8 +250,8 @@ if FIT
 
 config FIT_ENABLE_SHA256_SUPPORT
 	bool "Support SHA256 checksum of FIT image contents"
-	select SHA256
 	default y
+	select SHA256
 	help
 	  Enable this to support SHA256 checksum of FIT image contents. A
 	  SHA256 checksum is a 256-bit (32-byte) hash value used to check that
@@ -252,8 +265,8 @@ config FIT_ENABLE_SHA256_SUPPORT
 config FIT_SIGNATURE
 	bool "Enable signature verification of FIT uImages"
 	depends on DM
-	select RSA
 	select HASH
+	select RSA
 	help
 	  This option enables signature verification of FIT uImages,
 	  using a hash signed and verified using RSA. If
@@ -267,6 +280,16 @@ config FIT_SIGNATURE
 	  format support in this case, enable it using
 	  CONFIG_IMAGE_FORMAT_LEGACY.
 
+config FIT_SIGNATURE_MAX_SIZE
+	hex "Max size of signed FIT structures"
+	depends on FIT_SIGNATURE
+	default 0x10000000
+	help
+	  This option sets a max size in bytes for verified FIT uImages.
+	  A sane value of 256MB protects corrupted DTB structures from overlapping
+	  device memory. Assure this size does not extend past expected storage
+	  space.
+
 config FIT_VERBOSE
 	bool "Show verbose messages when FIT images fail"
 	help

MAINTAINERS

@@ -74,6 +74,7 @@ ARC HSDK CREG GPIO
 M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
 S:	Maintained
 L:	uboot-snps-arc@synopsys.com
+F:	doc/device-tree-bindings/gpio/snps,creg-gpio.txt
 F:	drivers/gpio/hsdk-creg-gpio.c
 
 ARM
@@ -107,6 +108,16 @@ F:	drivers/video/bcm2835.c
 F:	include/dm/platform_data/serial_bcm283x_mu.h
 F:	drivers/pinctrl/broadcom/
 
+ARM BROADCOM BCMSTB
+M:	Thomas Fitzsimmons <fitzsim@fitzsim.org>
+S:	Maintained
+F:	arch/arm/mach-bcmstb/
+F:	board/broadcom/bcmstb/
+F:	configs/bcm7445_defconfig
+F:	doc/README.bcm7xxx
+F:	drivers/mmc/bcmstb_sdhci.c
+F:	drivers/spi/bcmstb_spi.c
+
 ARM FREESCALE IMX
 M:	Stefano Babic <sbabic@denx.de>
 M:	Fabio Estevam <fabio.estevam@nxp.com>
@@ -145,6 +156,15 @@ T:	git git://git.denx.de/u-boot-pxa.git
 F:	arch/arm/cpu/pxa/
 F:	arch/arm/include/asm/arch-pxa/
 
+ARM OWL
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+S:	Maintained
+F:	arch/arm/include/asm/arch-owl/
+F:	arch/arm/mach-owl/
+F:	board/ucRobotics/
+F:	drivers/clk/owl/
+F:	drivers/serial/serial_owl.c
+
 ARM RENESAS RMOBILE/R-CAR
 M:	Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 M:	Marek Vasut <marek.vasut+renesas@gmail.com>
@@ -187,6 +207,11 @@ ARM SNAPDRAGON
 M:	Ramon Fried <ramon.fried@gmail.com>
 S:	Maintained
 F:	arch/arm/mach-snapdragon/
+F:	drivers/gpio/msm_gpio.c
+F:	drivers/mmc/msm_sdhci.c
+F:	drivers/serial/serial_msm.c
+F:	drivers/smem/msm_smem.c
+F:	drivers/usb/host/ehci-msm.c
 
 ARM STI
 M:	Patrice Chotard <patrice.chotard@st.com>
@@ -203,11 +228,21 @@ F:	arch/arm/include/asm/arch-spear/
 
 ARM STM STM32MP
 M:	Patrick Delaunay <patrick.delaunay@st.com>
+M:	Christophe Kerello <christophe.kerello@st.com>
+M:	Patrice Chotard <patrice.chotard@st.com>
 S:	Maintained
 F:	arch/arm/mach-stm32mp
 F:	drivers/clk/clk_stm32mp1.c
+F:	drivers/i2c/stm32f7_i2c.c
 F:	drivers/misc/stm32mp_fuse.c
+F:	drivers/mmc/stm32_sdmmc2.c
+F:	drivers/phy/phy-stm32-usbphyc.c
+F:	drivers/pinctrl/pinctrl_stm32.c
+F:	drivers/power/regulator/stm32-vrefbuf.c
 F:	drivers/ram/stm32mp1/
+F:	drivers/misc/stm32_rcc.c
+F:	drivers/reset/stm32-reset.c
+F:	drivers/spi/stm32_qspi.c
 
 ARM STM STV0991
 M:	Vikas Manocha <vikas.manocha@st.com>
@@ -296,6 +331,7 @@ F:	drivers/usb/host/ehci-zynq.c
 F:	drivers/watchdog/cdns_wdt.c
 F:	include/zynqmppl.h
 F:	tools/zynqmp*
+N:	ultra96
 N:	zynqmp
 
 ARM ZYNQMP R5
@@ -342,12 +378,13 @@ EFI PAYLOAD
 M:	Alexander Graf <agraf@suse.de>
 S:	Maintained
 T:	git git://github.com/agraf/u-boot.git
-F:	doc/DocBook/efi.tmpl
 F:	doc/README.uefi
 F:	doc/README.iscsi
+F:	Documentation/efi.rst
 F:	include/efi*
 F:	include/pe.h
 F:	include/asm-generic/pe.h
+F:	lib/charset.c
 F:	lib/efi*/
 F:	test/py/tests/test_efi*
 F:	cmd/bootefi.c
@@ -400,6 +437,7 @@ F:	drivers/net/xilinx_axi_emac.c
 F:	drivers/net/xilinx_emaclite.c
 F:	drivers/serial/serial_xuartlite.c
 F:	drivers/spi/xilinx_spi.c
+F:	drivers/sysreset/sysreset_gpio.c
 F:	drivers/watchdog/xilinx_tb_wdt.c
 N:	xilinx
 
@@ -416,8 +454,8 @@ T:	git git://git.denx.de/u-boot-mmc.git
 F:	drivers/mmc/
 
 NAND FLASH
-M:	Scott Wood <oss@buserror.net>
-S:	Maintained
+#M:	Scott Wood <oss@buserror.net>
+S:	Orphaned (Since 2018-07)
 T:	git git://git.denx.de/u-boot-nand-flash.git
 F:	drivers/mtd/nand/
 

Makefile

@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 VERSION = 2018
-PATCHLEVEL = 07
+PATCHLEVEL = 09
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -263,8 +263,9 @@ HOSTCXXFLAGS = -O2
 # Some Linux distributions (including RHEL7, SLES13, Debian 8) still
 # have older compilers as their default, so we make it explicit for
 # these that our host tools are GNU11 (i.e. C11 w/ GNU extensions).
+CSTD_FLAG := -std=gnu11
 ifeq ($(HOSTOS),linux)
-HOSTCFLAGS += --std=gnu11
+HOSTCFLAGS += $(CSTD_FLAG)
 endif
 
 ifeq ($(HOSTOS),cygwin)
@@ -370,10 +371,14 @@ KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__
 
 KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
 		   -Wno-format-security \
-		   -fno-builtin -ffreestanding
+		   -fno-builtin -ffreestanding $(CSTD_FLAG)
 KBUILD_CFLAGS	+= -fshort-wchar
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
+# Don't generate position independent code
+KBUILD_CFLAGS	+= $(call cc-option,-fno-PIE)
+KBUILD_AFLAGS	+= $(call cc-option,-fno-PIE)
+
 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
@@ -1052,11 +1057,6 @@ ifndef CONFIG_SYS_UBOOT_START
 CONFIG_SYS_UBOOT_START := 0
 endif
 
-# Create a file containing the configuration options the image was built with
-quiet_cmd_cpp_cfg = CFG     $@
-cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
-	-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
-
 # Boards with more complex image requirments can provide an .its source file
 # or a generator script
 ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
@@ -1115,8 +1115,8 @@ u-boot.sha1:	u-boot.bin
 u-boot.dis:	u-boot
 		$(OBJDUMP) -d $< > $@
 
-ifdef CONFIG_TPL
-SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
+ifneq ($(CONFIG_SPL_PAYLOAD),)
+SPL_PAYLOAD := $(CONFIG_SPL_PAYLOAD:"%"=%)
 else
 SPL_PAYLOAD := u-boot.bin
 endif
@@ -1238,8 +1238,9 @@ endif
 
 ifneq ($(CONFIG_TEGRA),)
 ifneq ($(CONFIG_BINMAN),)
-u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin: \
-		spl/u-boot-spl u-boot.bin FORCE
+# Makes u-boot-dtb-tegra.bin u-boot-tegra.bin u-boot-nodtb-tegra.bin
+%-dtb-tegra.bin %-tegra.bin %-nodtb-tegra.bin: \
+		spl/%-spl %.bin FORCE
 	$(call if_changed,binman)
 else
 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
@@ -1607,19 +1608,18 @@ clean: rm-files := $(CLEAN_FILES)
 
 clean-dirs	:= $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
 
-clean-dirs      := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
+clean-dirs      := $(addprefix _clean_, $(clean-dirs))
 
 PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
-# TODO: Do not use *.cfgtmp
 clean: $(clean-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
 	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-		-o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
+		-o -name '*.ko.*' -o -name '*.su' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 		-o -name '*.lex.c' -o -name '*.tab.[ch]' \
 		-o -name '*.symtypes' -o -name 'modules.order' \
@@ -1690,7 +1690,7 @@ help:
 	@echo  '  coccicheck      - Execute static code analysis with Coccinelle'
 	@echo  ''
 	@echo  'Documentation targets:'
-	@$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
+	@$(MAKE) -f $(srctree)/Documentation/Makefile dochelp
 	@echo  ''
 	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
 	@echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
@@ -1712,9 +1712,11 @@ tests:
 
 # Documentation targets
 # ---------------------------------------------------------------------------
-%docs: scripts_basic FORCE
-	$(Q)$(MAKE) $(build)=scripts build_docproc
-	$(Q)$(MAKE) $(build)=doc/DocBook $@
+DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
+	       linkcheckdocs dochelp refcheckdocs
+PHONY += $(DOC_TARGETS)
+$(DOC_TARGETS): scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=Documentation $@
 
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)

README

@@ -874,9 +874,6 @@ The following options need to be configured:
 		CONFIG_EFI_PARTITION   GPT partition table, common when EFI is the
 				       bootloader.  Note 2TB partition limit; see
 				       disk/part_efi.c
-		CONFIG_MTD_PARTITIONS  Memory Technology Device partition table.
-
-		If IDE or SCSI support is enabled (CONFIG_IDE or
 		CONFIG_SCSI) you must configure support for at
 		least one non-MTD partition type as well.
 
@@ -980,9 +977,6 @@ The following options need to be configured:
 			Define this to use i/o functions instead of macros
 			(some hardware wont work with macros)
 
-		CONFIG_DRIVER_TI_EMAC
-		Support for davinci emac
-
 			CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
 			Define this if you have more then 3 PHYs.
 
@@ -2433,17 +2427,6 @@ FIT uImage format:
 		for a more detailed description refer to doc/README.update.
 
 - MTD Support (mtdparts command, UBI support)
-		CONFIG_MTD_DEVICE
-
-		Adds the MTD device infrastructure from the Linux kernel.
-		Needed for mtdparts command support.
-
-		CONFIG_MTD_PARTITIONS
-
-		Adds the MTD partitioning infrastructure from the Linux
-		kernel. Needed for UBI support.
-
-- UBI support
 		CONFIG_MTD_UBI_WL_THRESHOLD
 		This parameter defines the maximum difference between the highest
 		erase counter value and the lowest erase counter value of eraseblocks
@@ -2625,6 +2608,10 @@ FIT uImage format:
 		CONFIG_SPL_NAND_DRIVERS
 		SPL uses normal NAND drivers, not minimal drivers.
 
+		CONFIG_SPL_NAND_IDENT
+		SPL uses the chip ID list to identify the NAND flash.
+		Requires CONFIG_SPL_NAND_BASE.
+
 		CONFIG_SPL_NAND_ECC
 		Include standard software ECC in the SPL
 
@@ -3953,6 +3940,17 @@ If CONFIG_REGEX is defined, the variable_name above is evaluated as a
 regular expression. This allows multiple variables to be connected to
 the same callback without explicitly listing them all out.
 
+The signature of the callback functions is:
+
+    int callback(const char *name, const char *value, enum env_op op, int flags)
+
+* name - changed environment variable
+* value - new value of the environment variable
+* op - operation (create, overwrite, or delete)
+* flags - attributes of the environment variable change, see flags H_* in
+  include/search.h
+
+The return value is 0 if the variable change is accepted and 1 otherwise.
 
 Command Line Parsing:
 =====================

arch/Kconfig

@@ -10,12 +10,12 @@ choice
 
 config ARC
 	bool "ARC architecture"
+	select ARCH_EARLY_INIT_R
+	select ARC_TIMER
+	select CLK
 	select HAVE_PRIVATE_LIBGCC
 	select SUPPORT_OF_CONTROL
-	select ARCH_EARLY_INIT_R
-	select CLK
 	select TIMER
-	select ARC_TIMER
 
 config ARM
 	bool "ARM architecture"
@@ -46,10 +46,11 @@ config NDS32
 
 config NIOS2
 	bool "Nios II architecture"
-	select SUPPORT_OF_CONTROL
-	select OF_CONTROL
-	select DM
 	select CPU
+	select DM
+	select OF_CONTROL
+	select SUPPORT_OF_CONTROL
+	imply CMD_DM
 
 config PPC
 	bool "PowerPC architecture"
@@ -65,30 +66,31 @@ config RISCV
 config SANDBOX
 	bool "Sandbox"
 	select BOARD_LATE_INIT
-	select SUPPORT_OF_CONTROL
 	select DM
-	select DM_KEYBOARD
-	select DM_SPI_FLASH
-	select DM_SERIAL
-	select DM_I2C
-	select DM_SPI
 	select DM_GPIO
+	select DM_I2C
+	select DM_KEYBOARD
 	select DM_MMC
+	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
 	select HAVE_BLOCK_DEVICE
-	select SPI
 	select LZO
+	select SPI
+	select SUPPORT_OF_CONTROL
+	imply CMD_DM
 	imply CMD_GETTIME
 	imply CMD_HASH
 	imply CMD_IO
 	imply CMD_IOTRACE
 	imply CMD_LZMADEC
+	imply CMD_SATA
+	imply CMD_SF_TEST
 	imply CRC32_VERIFY
 	imply FAT_WRITE
 	imply HASH_VERIFY
 	imply LZMA
 	imply SCSI
-	imply CMD_SATA
-	imply CMD_SF_TEST
 
 config SH
 	bool "SuperH architecture"
@@ -97,27 +99,17 @@ config SH
 config X86
 	bool "x86 architecture"
 	select CREATE_ARCH_SYMLINK
-	select HAVE_PRIVATE_LIBGCC
-	select USE_PRIVATE_LIBGCC
-	select SUPPORT_OF_CONTROL
-	select OF_CONTROL
 	select DM
 	select DM_PCI
+	select HAVE_PRIVATE_LIBGCC
+	select OF_CONTROL
 	select PCI
+	select SUPPORT_OF_CONTROL
 	select TIMER
+	select USE_PRIVATE_LIBGCC
 	select X86_TSC_TIMER
 	imply BLK
-	imply DM_ETH
-	imply DM_GPIO
-	imply DM_KEYBOARD
-	imply DM_MMC
-	imply DM_RTC
-	imply DM_SERIAL
-	imply DM_SCSI
-	imply DM_SPI
-	imply DM_SPI_FLASH
-	imply DM_USB
-	imply DM_VIDEO
+	imply CMD_DM
 	imply CMD_FPGA_LOADMK
 	imply CMD_GETTIME
 	imply CMD_IO
@@ -125,9 +117,22 @@ config X86
 	imply CMD_PCI
 	imply CMD_SF_TEST
 	imply CMD_ZBOOT
-	imply USB_HOST_ETHER
+	imply DM_ETH
+	imply DM_GPIO
+	imply DM_KEYBOARD
+	imply DM_MMC
+	imply DM_RTC
+	imply DM_SCSI
+	imply DM_SERIAL
+	imply DM_SPI
+	imply DM_SPI_FLASH
+	imply DM_USB
+	imply DM_VIDEO
+	imply SYSRESET
+	imply SYSRESET_X86
 	imply USB_ETHER_ASIX
 	imply USB_ETHER_SMSC95XX
+	imply USB_HOST_ETHER
 
 config XTENSA
 	bool "Xtensa architecture"

arch/arc/Kconfig

@@ -31,36 +31,36 @@ choice
 
 config CPU_ARC750D
 	bool "ARC 750D"
-	select ARC_MMU_V2
 	depends on ISA_ARCOMPACT
+	select ARC_MMU_V2
 	help
 	  Choose this option to build an U-Boot for ARC750D CPU.
 
 config CPU_ARC770D
 	bool "ARC 770D"
-	select ARC_MMU_V3
 	depends on ISA_ARCOMPACT
+	select ARC_MMU_V3
 	help
 	  Choose this option to build an U-Boot for ARC770D CPU.
 
 config CPU_ARCEM6
 	bool "ARC EM6"
-	select ARC_MMU_ABSENT
 	depends on ISA_ARCV2
+	select ARC_MMU_ABSENT
 	help
 	  Next Generation ARC Core based on ISA-v2 ISA without MMU.
 
 config CPU_ARCHS36
 	bool "ARC HS36"
-	select ARC_MMU_ABSENT
 	depends on ISA_ARCV2
+	select ARC_MMU_ABSENT
 	help
 	  Next Generation ARC Core based on ISA-v2 ISA without MMU.
 
 config CPU_ARCHS38
 	bool "ARC HS38"
-	select ARC_MMU_V4
 	depends on ISA_ARCV2
+	select ARC_MMU_V4
 	help
 	  Next Generation ARC Core based on ISA-v2 ISA with MMU.
 

arch/arc/dts/axs10x_mb.dtsi

@@ -4,6 +4,10 @@
  */
 
 / {
+	aliases {
+		spi0 = &spi0;
+	};
+
 	axs10x_mb@e0000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -56,5 +60,35 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 		};
+
+		spi0: spi@0 {
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			spi-max-frequency = <4000000>;
+			clocks = <&apbclk>;
+			clock-names = "spi_clk";
+			cs-gpio = <&cs_gpio 0>;
+			spi_flash@0 {
+				compatible = "spi-flash";
+				reg = <0>;
+				spi-max-frequency = <4000000>;
+			};
+		};
+
+		cs_gpio: gpio@11218 {
+			compatible = "snps,creg-gpio";
+			reg = <0x11218 0x4>;
+			gpio-controller;
+			#gpio-cells = <1>;
+			gpio-bank-name = "axs-spi-cs";
+			gpio-count = <1>;
+			gpio-first-shift = <0>;
+			gpio-bit-per-line = <2>;
+			gpio-activate-val = <1>;
+			gpio-deactivate-val = <3>;
+			gpio-default-val = <1>;
+		};
 	};
 };

arch/arc/dts/hsdk.dts

@@ -20,7 +20,7 @@
 		core_clk: core_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <1000000000>;
+			clock-frequency = <500000000>;
 			u-boot,dm-pre-reloc;
 		};
 	};
@@ -101,11 +101,16 @@
 	};
 
 	cs_gpio: gpio@f00014b0 {
-		compatible = "snps,hsdk-creg-gpio";
+		compatible = "snps,creg-gpio";
 		reg = <0xf00014b0 0x4>;
 		gpio-controller;
 		#gpio-cells = <1>;
 		gpio-bank-name = "hsdk-spi-cs";
 		gpio-count = <1>;
+		gpio-first-shift = <0>;
+		gpio-bit-per-line = <2>;
+		gpio-activate-val = <2>;
+		gpio-deactivate-val = <3>;
+		gpio-default-val = <1>;
 	};
 };

arch/arc/include/asm/arcregs.h

@@ -19,6 +19,9 @@
 #define ARC_AUX_IDENTITY	0x04
 #define ARC_AUX_STATUS32	0x0a
 
+/* STATUS32 Bits Positions */
+#define STATUS_AD_BIT		19	/* Enable unaligned access */
+
 /* Instruction cache related auxiliary registers */
 #define ARC_AUX_IC_IVIC		0x10
 #define ARC_AUX_IC_CTRL		0x11

arch/arc/lib/start.S

@@ -61,6 +61,15 @@ ENTRY(_start)
 1:
 #endif
 
+#ifdef __ARC_UNALIGNED__
+	/*
+	 * Enable handling of unaligned access in the CPU as by default
+	 * this HW feature is disabled while GCC starting from 8.1.0
+	 * unconditionally uses it for ARC HS cores.
+	 */
+	flag	1 << STATUS_AD_BIT
+#endif
+
 	/* Establish C runtime stack and frame */
 	mov	%sp, CONFIG_SYS_INIT_SP_ADDR
 	mov	%fp, %sp

arch/arm/Kconfig

@@ -108,6 +108,9 @@ config SYS_ARM_MPU
 # CONFIG_ARM_ERRATA_621766
 # CONFIG_ARM_ERRATA_798870
 # CONFIG_ARM_ERRATA_801819
+# CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+# CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+
 config ARM_ERRATA_430973
 	bool
 
@@ -166,7 +169,7 @@ config ARM_ERRATA_833471
 	bool
 
 config ARM_ERRATA_845369
-       bool
+	bool
 
 config ARM_ERRATA_852421
 	bool
@@ -177,6 +180,12 @@ config ARM_ERRATA_852423
 config ARM_ERRATA_855873
 	bool
 
+config ARM_CORTEX_A8_CVE_2017_5715
+	bool
+
+config ARM_CORTEX_A15_CVE_2017_5715
+	bool
+
 config CPU_ARM720T
 	bool
 	select SYS_CACHE_SHIFT_5
@@ -210,25 +219,25 @@ config CPU_ARM1176
 
 config CPU_V7A
 	bool
-	select HAS_VBAR
 	select HAS_THUMB2
+	select HAS_VBAR
 	select SYS_CACHE_SHIFT_6
 	imply SYS_ARM_MMU
 
 config CPU_V7M
 	bool
 	select HAS_THUMB2
-	select THUMB2_KERNEL
-	select SYS_CACHE_SHIFT_5
 	select SYS_ARM_MPU
+	select SYS_CACHE_SHIFT_5
 	select SYS_THUMB_BUILD
+	select THUMB2_KERNEL
 
 config CPU_V7R
 	bool
 	select HAS_THUMB2
-	select SYS_CACHE_SHIFT_6
-	select SYS_ARM_MPU
 	select SYS_ARM_CACHE_CP15
+	select SYS_ARM_MPU
+	select SYS_CACHE_SHIFT_6
 
 config CPU_PXA
 	bool
@@ -418,20 +427,21 @@ config ARCH_DAVINCI
 
 config KIRKWOOD
 	bool "Marvell Kirkwood"
-	select CPU_ARM926EJS
-	select BOARD_EARLY_INIT_F
 	select ARCH_MISC_INIT
+	select BOARD_EARLY_INIT_F
+	select CPU_ARM926EJS
 
 config ARCH_MVEBU
 	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
-	select OF_CONTROL
-	select OF_SEPARATE
 	select DM
 	select DM_ETH
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
+	select OF_CONTROL
+	select OF_SEPARATE
 	select SPI
+	imply CMD_DM
 
 config TARGET_DEVKIT3250
 	bool "Support devkit3250"
@@ -454,31 +464,31 @@ config ORION5X
 
 config TARGET_SPEAR300
 	bool "Support spear300"
-	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
-	imply CMD_SAVES
+	select CPU_ARM926EJS
 	select PL011_SERIAL
+	imply CMD_SAVES
 
 config TARGET_SPEAR310
 	bool "Support spear310"
-	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
-	imply CMD_SAVES
+	select CPU_ARM926EJS
 	select PL011_SERIAL
+	imply CMD_SAVES
 
 config TARGET_SPEAR320
 	bool "Support spear320"
-	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
-	imply CMD_SAVES
+	select CPU_ARM926EJS
 	select PL011_SERIAL
+	imply CMD_SAVES
 
 config TARGET_SPEAR600
 	bool "Support spear600"
-	select CPU_ARM926EJS
 	select BOARD_EARLY_INIT_F
-	imply CMD_SAVES
+	select CPU_ARM926EJS
 	select PL011_SERIAL
+	imply CMD_SAVES
 
 config TARGET_STV0991
 	bool "Support stv0991"
@@ -487,16 +497,17 @@ config TARGET_STV0991
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
+	select PL01X_SERIAL
 	select SPI
 	select SPI_FLASH
-	select PL01X_SERIAL
+	imply CMD_DM
 
 config TARGET_X600
 	bool "Support x600"
 	select BOARD_LATE_INIT
 	select CPU_ARM926EJS
-	select SUPPORT_SPL
 	select PL011_SERIAL
+	select SUPPORT_SPL
 
 config TARGET_WOODBURN
 	bool "Support woodburn"
@@ -519,11 +530,12 @@ config TARGET_MX35PDK
 config ARCH_BCM283X
 	bool "Broadcom BCM283X family"
 	select DM
-	select DM_SERIAL
 	select DM_GPIO
+	select DM_SERIAL
 	select OF_CONTROL
 	select PL01X_SERIAL
 	select SERIAL_SEARCH_ALL
+	imply CMD_DM
 	imply FAT_WRITE
 
 config TARGET_VEXPRESS_CA15_TC2
@@ -533,6 +545,17 @@ config TARGET_VEXPRESS_CA15_TC2
 	select CPU_V7_HAS_VIRT
 	select PL011_SERIAL
 
+config ARCH_BCMSTB
+	bool "Broadcom BCM7XXX family"
+	select CPU_V7A
+	select DM
+	select OF_CONTROL
+	select OF_PRIOR_STAGE
+	imply CMD_DM
+	help
+	  This enables support for Broadcom ARM-based set-top box
+	  chipsets, including the 7445 family of chips.
+
 config TARGET_VEXPRESS_CA5X2
 	bool "Support vexpress_ca5x2"
 	select CPU_V7A
@@ -558,13 +581,13 @@ config TARGET_BCM28155_AP
 config TARGET_BCMCYGNUS
 	bool "Support bcmcygnus"
 	select CPU_V7A
-	imply CRC32_VERIFY
+	imply BCM_SF2_ETH
+	imply BCM_SF2_ETH_GMAC
 	imply CMD_HASH
+	imply CRC32_VERIFY
 	imply FAT_WRITE
 	imply HASH_VERIFY
 	imply NETDEVICES
-	imply BCM_SF2_ETH
-	imply BCM_SF2_ETH_GMAC
 
 config TARGET_BCMNSP
 	bool "Support bcmnsp"
@@ -581,22 +604,24 @@ config TARGET_BCMNS2
 config ARCH_EXYNOS
 	bool "Samsung EXYNOS"
 	select DM
+	select DM_GPIO
 	select DM_I2C
-	select DM_SPI_FLASH
+	select DM_KEYBOARD
 	select DM_SERIAL
 	select DM_SPI
-	select DM_GPIO
-	select DM_KEYBOARD
+	select DM_SPI_FLASH
 	select SPI
+	imply CMD_DM
 	imply FAT_WRITE
 
 config ARCH_S5PC1XX
 	bool "Samsung S5PC1XX"
 	select CPU_V7A
 	select DM
-	select DM_SERIAL
 	select DM_GPIO
 	select DM_I2C
+	select DM_SERIAL
+	imply CMD_DM
 
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
@@ -608,17 +633,18 @@ config ARCH_INTEGRATOR
 	select DM
 	select DM_SERIAL
 	select PL01X_SERIAL
+	imply CMD_DM
 
 config ARCH_KEYSTONE
 	bool "TI Keystone"
+	select CMD_POWEROFF
 	select CPU_V7A
 	select SUPPORT_SPL
-	select SYS_THUMB_BUILD
-	select CMD_POWEROFF
 	select SYS_ARCH_TIMER
+	select SYS_THUMB_BUILD
 	imply CMD_MTDPARTS
-	imply FIT
 	imply CMD_SAVES
+	imply FIT
 
 config ARCH_OMAP2PLUS
 	bool "TI OMAP2+"
@@ -641,6 +667,7 @@ config ARCH_MX8M
 	select ARM64
 	select DM
 	select SUPPORT_SPL
+	imply CMD_DM
 
 config ARCH_MX23
 	bool "NXP i.MX23 family"
@@ -664,19 +691,19 @@ config ARCH_MX31
 	select CPU_ARM1136
 
 config ARCH_MX7ULP
-        bool "NXP MX7ULP"
+	bool "NXP MX7ULP"
 	select CPU_V7A
 	select ROM_UNIFIED_SECTIONS
 	imply MXC_GPIO
 
 config ARCH_MX7
 	bool "Freescale MX7"
+	select ARCH_MISC_INIT
+	select BOARD_EARLY_INIT_F
 	select CPU_V7A
 	select SYS_FSL_HAS_SEC if SECURE_BOOT
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
-	select BOARD_EARLY_INIT_F
-	select ARCH_MISC_INIT
 	imply MXC_GPIO
 
 config ARCH_MX6
@@ -690,27 +717,37 @@ config ARCH_MX6
 
 if ARCH_MX6
 config SPL_LDSCRIPT
-        default "arch/arm/mach-omap2/u-boot-spl.lds"
+	default "arch/arm/mach-omap2/u-boot-spl.lds"
 endif
 
 config ARCH_MX5
 	bool "Freescale MX5"
-	select CPU_V7A
 	select BOARD_EARLY_INIT_F
+	select CPU_V7A
 	imply MXC_GPIO
 
+config ARCH_OWL
+	bool "Actions Semi OWL SoCs"
+	select ARM64
+	select DM
+	select DM_SERIAL
+	select OF_CONTROL
+	imply CMD_DM
+
 config ARCH_QEMU
 	bool "QEMU Virtual Platform"
 	select DM
 	select DM_SERIAL
 	select OF_CONTROL
 	select PL01X_SERIAL
+	imply CMD_DM
 
 config ARCH_RMOBILE
 	bool "Renesas ARM SoCs"
+	select BOARD_EARLY_INIT_F
 	select DM
 	select DM_SERIAL
-	select BOARD_EARLY_INIT_F
+	imply CMD_DM
 	imply FAT_WRITE
 	imply SYS_THUMB_BUILD
 
@@ -725,40 +762,46 @@ config ARCH_SNAPDRAGON
 	select DM
 	select DM_GPIO
 	select DM_SERIAL
-	select SPMI
+	select MSM_SMEM
 	select OF_CONTROL
 	select OF_SEPARATE
+	select SMEM
+	select SPMI
+	imply CMD_DM
 
 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
 	select ARCH_EARLY_INIT_R
-	select ARCH_MISC_INIT
-	select CPU_V7A
+	select ARCH_MISC_INIT if !TARGET_SOCFPGA_ARRIA10
+	select ARM64 if TARGET_SOCFPGA_STRATIX10
+	select CPU_V7A if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
 	select DM
 	select DM_SERIAL
-	select ENABLE_ARM_SOC_BOOT0_HOOK
+	select ENABLE_ARM_SOC_BOOT0_HOOK if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
 	select OF_CONTROL
+	select SPL_DM_RESET if DM_RESET
+	select SPL_DM_SERIAL
 	select SPL_LIBCOMMON_SUPPORT
 	select SPL_LIBDISK_SUPPORT
 	select SPL_LIBGENERIC_SUPPORT
 	select SPL_MMC_SUPPORT if DM_MMC
 	select SPL_NAND_SUPPORT if SPL_NAND_DENALI
 	select SPL_OF_CONTROL
+	select SPL_SEPARATE_BSS if TARGET_SOCFPGA_STRATIX10
 	select SPL_SERIAL_SUPPORT
-	select SPL_DM_SERIAL
 	select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT
 	select SPL_SPI_SUPPORT if DM_SPI
 	select SPL_WATCHDOG_SUPPORT
 	select SUPPORT_SPL
 	select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
 	select SYS_NS16550
-	select SYS_THUMB_BUILD
+	select SYS_THUMB_BUILD if TARGET_SOCFPGA_GEN5 || TARGET_SOCFPGA_ARRIA10
+	imply CMD_DM
 	imply CMD_MTDPARTS
 	imply CRC32_VERIFY
 	imply DM_SPI
 	imply DM_SPI_FLASH
 	imply FAT_WRITE
-	imply HW_WATCHDOG
 	imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 
 config ARCH_SUNXI
@@ -779,14 +822,16 @@ config ARCH_SUNXI
 	select SPECIFY_CONSOLE_INDEX
 	select SPL_STACK_R if SPL
 	select SPL_SYS_MALLOC_SIMPLE if SPL
-	select SYS_NS16550
 	select SPL_SYS_THUMB_BUILD if !ARM64
+	select SYS_NS16550
 	select SYS_THUMB_BUILD if !ARM64
 	select USB if DISTRO_DEFAULTS
-	select USB_STORAGE if DISTRO_DEFAULTS
 	select USB_KEYBOARD if DISTRO_DEFAULTS
+	select USB_STORAGE if DISTRO_DEFAULTS
 	select USE_TINY_PRINTF
+	imply CMD_DM
 	imply CMD_GPT
+	imply CMD_UBI if NAND
 	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
 	imply OF_LIBFDT_OVERLAY
@@ -809,51 +854,54 @@ config ARCH_VF610
 
 config ARCH_ZYNQ
 	bool "Xilinx Zynq based platform"
-	select BOARD_LATE_INIT
-	select CPU_V7A
-	select SUPPORT_SPL
-	select OF_CONTROL
-	select SPL_BOARD_INIT if SPL
 	select BOARD_EARLY_INIT_F if WDT
-	select SPL_OF_CONTROL if SPL
+	select BOARD_LATE_INIT
+	select CLK
+	select CLK_ZYNQ
+	select CPU_V7A
 	select DM
 	select DM_ETH if NET
-	select SPL_DM if SPL
 	select DM_MMC if MMC
-	select DM_SPI
 	select DM_SERIAL
+	select DM_SPI
 	select DM_SPI_FLASH
-	select SPL_SEPARATE_BSS if SPL
 	select DM_USB if USB
-	select CLK
-	select SPL_CLK if SPL
-	select CLK_ZYNQ
+	select OF_CONTROL
 	select SPI
-	imply CMD_CLK
-	imply FAT_WRITE
-	imply CMD_SPL
+	select SPL_BOARD_INIT if SPL
+	select SPL_CLK if SPL
+	select SPL_DM if SPL
+	select SPL_OF_CONTROL if SPL
+	select SPL_SEPARATE_BSS if SPL
+	select SUPPORT_SPL
 	imply ARCH_EARLY_INIT_R
+	imply CMD_CLK
+	imply CMD_DM
+	imply CMD_SPL
+	imply FAT_WRITE
 
 config ARCH_ZYNQMP_R5
 	bool "Xilinx ZynqMP R5 based platform"
+	select CLK
 	select CPU_V7R
-	select OF_CONTROL
 	select DM
 	select DM_SERIAL
-	select CLK
+	select OF_CONTROL
+	imply CMD_DM
 
 config ARCH_ZYNQMP
 	bool "Xilinx ZynqMP based platform"
 	select ARM64
 	select BOARD_LATE_INIT
-	select DM
-	select OF_CONTROL
-	select DM_SERIAL
-	select SUPPORT_SPL
 	select CLK
+	select DM
+	select DM_SERIAL
+	select DM_USB if USB
+	select OF_CONTROL
 	select SPL_BOARD_INIT if SPL
 	select SPL_CLK if SPL
-	select DM_USB if USB
+	select SUPPORT_SPL
+	imply CMD_DM
 	imply FAT_WRITE
 
 config TEGRA
@@ -869,8 +917,8 @@ config TARGET_VEXPRESS64_AEMV8A
 config TARGET_VEXPRESS64_BASE_FVP
 	bool "Support Versatile Express ARMv8a FVP BASE model"
 	select ARM64
-	select SEMIHOSTING
 	select PL01X_SERIAL
+	select SEMIHOSTING
 
 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 	bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
@@ -890,9 +938,9 @@ config TARGET_VEXPRESS64_JUNO
 config TARGET_LS2080A_EMU
 	bool "Support ls2080a_emu"
 	select ARCH_LS2080A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
-	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2080A_EMU platform
 	  The LS2080A Development System (EMULATOR) is a pre silicon
@@ -902,9 +950,9 @@ config TARGET_LS2080A_EMU
 config TARGET_LS2080A_SIMU
 	bool "Support ls2080a_simu"
 	select ARCH_LS2080A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
-	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2080A_SIMU platform
 	  The LS2080A Development System (QDS) is a pre silicon
@@ -914,9 +962,9 @@ config TARGET_LS2080A_SIMU
 config TARGET_LS1088AQDS
 	bool "Support ls1088aqds"
 	select ARCH_LS1088A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
-	select ARCH_MISC_INIT
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	help
@@ -928,11 +976,11 @@ config TARGET_LS1088AQDS
 config TARGET_LS2080AQDS
 	bool "Support ls2080aqds"
 	select ARCH_LS2080A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
-	select ARCH_MISC_INIT
 	imply SCSI
 	imply SCSI_AHCI
 	help
@@ -944,11 +992,11 @@ config TARGET_LS2080AQDS
 config TARGET_LS2080ARDB
 	bool "Support ls2080ardb"
 	select ARCH_LS2080A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
-	select ARCH_MISC_INIT
 	imply SCSI
 	imply SCSI_AHCI
 	help
@@ -960,11 +1008,11 @@ config TARGET_LS2080ARDB
 config TARGET_LS2081ARDB
 	bool "Support ls2081ardb"
 	select ARCH_LS2080A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
-	select ARCH_MISC_INIT
 	help
 	  Support for Freescale LS2081ARDB platform.
 	  The LS2081A Reference design board (RDB) is a high-performance
@@ -980,6 +1028,7 @@ config TARGET_HIKEY
 	select OF_CONTROL
 	select PL01X_SERIAL
 	select SPECIFY_CONSOLE_INDEX
+	imply CMD_DM
 	  help
 	  Support for HiKey 96boards platform. It features a HI6220
 	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -988,10 +1037,11 @@ config TARGET_POPLAR
 	bool "Support Poplar 96boards Enterprise Edition Platform"
 	select ARM64
 	select DM
-	select OF_CONTROL
 	select DM_SERIAL
 	select DM_USB
+	select OF_CONTROL
 	select PL01X_SERIAL
+	imply CMD_DM
 	  help
 	  Support for Poplar 96boards EE platform. It features a HI3798cv200
 	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -1037,8 +1087,8 @@ config TARGET_LS1012A2G5RDB
 config TARGET_LS1012AFRWY
 	bool "Support ls1012afrwy"
 	select ARCH_LS1012A
-	select BOARD_LATE_INIT
 	select ARM64
+	select BOARD_LATE_INIT
 	imply SCSI
 	imply SCSI_AHCI
 	help
@@ -1060,9 +1110,9 @@ config TARGET_LS1012AFRDM
 config TARGET_LS1088ARDB
 	bool "Support ls1088ardb"
 	select ARCH_LS1088A
+	select ARCH_MISC_INIT
 	select ARM64
 	select ARMV8_MULTIENTRY
-	select ARCH_MISC_INIT
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
 	help
@@ -1073,40 +1123,40 @@ config TARGET_LS1088ARDB
 
 config TARGET_LS1021AQDS
 	bool "Support ls1021aqds"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
 	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
-	select SUPPORT_SPL
-	select ARCH_LS1021A
-	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
+	select SUPPORT_SPL
 	select SYS_FSL_DDR
-	select BOARD_EARLY_INIT_F
 	imply SCSI
 
 config TARGET_LS1021ATWR
 	bool "Support ls1021atwr"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
+	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
 	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
-	select SUPPORT_SPL
-	select ARCH_LS1021A
-	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
-	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
 	imply SCSI
 
 config TARGET_LS1021AIOT
 	bool "Support ls1021aiot"
+	select ARCH_LS1021A
+	select ARCH_SUPPORT_PSCI
 	select BOARD_LATE_INIT
 	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select SUPPORT_SPL
-	select ARCH_LS1021A
-	select ARCH_SUPPORT_PSCI
 	imply SCSI
 	help
 	  Support for Freescale LS1021AIOT platform.
@@ -1119,9 +1169,9 @@ config TARGET_LS1043AQDS
 	select ARCH_LS1043A
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
-	select BOARD_EARLY_INIT_F
 	imply SCSI
 	help
 	  Support for Freescale LS1043AQDS platform.
@@ -1131,9 +1181,9 @@ config TARGET_LS1043ARDB
 	select ARCH_LS1043A
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
 	select SUPPORT_SPL
-	select BOARD_EARLY_INIT_F
 	imply SCSI
 	help
 	  Support for Freescale LS1043ARDB platform.
@@ -1143,10 +1193,10 @@ config TARGET_LS1046AQDS
 	select ARCH_LS1046A
 	select ARM64
 	select ARMV8_MULTIENTRY
-	select BOARD_LATE_INIT
-	select SUPPORT_SPL
-	select DM_SPI_FLASH if DM_SPI
 	select BOARD_EARLY_INIT_F
+	select BOARD_LATE_INIT
+	select DM_SPI_FLASH if DM_SPI
+	select SUPPORT_SPL
 	imply SCSI
 	help
 	  Support for Freescale LS1046AQDS platform.
@@ -1159,11 +1209,11 @@ config TARGET_LS1046ARDB
 	select ARCH_LS1046A
 	select ARM64
 	select ARMV8_MULTIENTRY
+	select BOARD_EARLY_INIT_F
 	select BOARD_LATE_INIT
-	select SUPPORT_SPL
 	select DM_SPI_FLASH if DM_SPI
 	select POWER_MC34VR500
-	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
 	imply SCSI
 	help
 	  Support for Freescale LS1046ARDB platform.
@@ -1193,6 +1243,7 @@ config ARCH_UNIPHIER
 	select DM_RESET
 	select DM_SERIAL
 	select DM_USB
+	select OF_BOARD_SETUP
 	select OF_CONTROL
 	select OF_LIBFDT
 	select PINCTRL
@@ -1203,6 +1254,8 @@ config ARCH_UNIPHIER
 	select SPL_OF_CONTROL if SPL
 	select SPL_PINCTRL if SPL
 	select SUPPORT_SPL
+	imply CMD_DM
+	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
 	help
 	  Support for UniPhier SoC family developed by Socionext Inc.
@@ -1214,15 +1267,17 @@ config STM32
 	select DM
 	select DM_SERIAL
 	select SYS_THUMB_BUILD
+	imply CMD_DM
 
 config ARCH_STI
 	bool "Support STMicrolectronics SoCs"
+	select BLK
 	select CPU_V7A
 	select DM
-	select DM_SERIAL
-	select BLK
 	select DM_MMC
 	select DM_RESET
+	select DM_SERIAL
+	imply CMD_DM
 	help
 	  Support for STMicroelectronics STiH407/10 SoC family.
 	  This SoC is used on Linaro 96Board STiH410-B2260
@@ -1236,15 +1291,16 @@ config ARCH_STM32MP
 	select DM_GPIO
 	select DM_RESET
 	select DM_SERIAL
+	select MISC
 	select OF_CONTROL
 	select OF_LIBFDT
-	select MISC
 	select PINCTRL
 	select REGMAP
 	select SUPPORT_SPL
 	select SYSCON
 	select SYSRESET
 	select SYS_THUMB_BUILD
+	imply CMD_DM
 	help
 	  Support for STM32MP SoC family developed by STMicroelectronics,
 	  MPUs based on ARM cortex A core
@@ -1253,44 +1309,46 @@ config ARCH_STM32MP
 
 config ARCH_ROCKCHIP
 	bool "Support Rockchip SoCs"
-	select OF_CONTROL
 	select BLK
 	select DM
-	select SPL_DM if SPL
-	select SYS_MALLOC_F
-	select SYS_THUMB_BUILD if !ARM64
-	select SPL_SYS_MALLOC_SIMPLE if SPL
 	select DM_GPIO
 	select DM_I2C
 	select DM_MMC
+	select DM_PWM
+	select DM_REGULATOR
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
 	select DM_USB if USB
-	select DM_PWM
-	select DM_REGULATOR
 	select ENABLE_ARM_SOC_BOOT0_HOOK
+	select OF_CONTROL
 	select SPI
+	select SPL_DM if SPL
+	select SPL_SYS_MALLOC_SIMPLE if SPL
+	select SYS_MALLOC_F
+	select SYS_THUMB_BUILD if !ARM64
+	imply ADC
+	imply CMD_DM
 	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
-	imply USB_FUNCTION_FASTBOOT
-	imply SPL_SYSRESET
-	imply TPL_SYSRESET
-	imply ADC
 	imply SARADC_ROCKCHIP
+	imply SPL_SYSRESET
 	imply SYS_NS16550
+	imply TPL_SYSRESET
+	imply USB_FUNCTION_FASTBOOT
 
 config TARGET_THUNDERX_88XX
 	bool "Support ThunderX 88xx"
 	select ARM64
 	select OF_CONTROL
-	select SYS_CACHE_SHIFT_7
 	select PL01X_SERIAL
+	select SYS_CACHE_SHIFT_7
 
 config ARCH_ASPEED
 	bool "Support Aspeed SoCs"
-	select OF_CONTROL
 	select DM
+	select OF_CONTROL
+	imply CMD_DM
 
 endchoice
 
@@ -1310,6 +1368,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-bcm283x/Kconfig"
 
+source "arch/arm/mach-bcmstb/Kconfig"
+
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
@@ -1348,6 +1408,8 @@ source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
+source "arch/arm/mach-owl/Kconfig"
+
 source "arch/arm/mach-rmobile/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
@@ -1419,7 +1481,6 @@ source "board/freescale/ls1012ardb/Kconfig"
 source "board/freescale/ls1012afrdm/Kconfig"
 source "board/freescale/mx35pdk/Kconfig"
 source "board/freescale/s32v234evb/Kconfig"
-source "board/gdsys/a38x/Kconfig"
 source "board/grinn/chiliboard/Kconfig"
 source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
@@ -1435,12 +1496,15 @@ source "board/spear/spear600/Kconfig"
 source "board/spear/x600/Kconfig"
 source "board/st/stv0991/Kconfig"
 source "board/tcl/sl50/Kconfig"
+source "board/ucRobotics/bubblegum_96/Kconfig"
 source "board/birdland/bav335x/Kconfig"
 source "board/timll/devkit3250/Kconfig"
 source "board/toradex/colibri_pxa270/Kconfig"
 source "board/vscom/baltos/Kconfig"
 source "board/woodburn/Kconfig"
 source "board/work-microwave/work_92105/Kconfig"
+source "board/xilinx/Kconfig"
+source "board/xilinx/zynq/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
 source "board/zipitz2/Kconfig"
 
@@ -1449,8 +1513,8 @@ source "arch/arm/Kconfig.debug"
 endmenu
 
 config SPL_LDSCRIPT
-        default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
-        default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
+	default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
+	default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
 	default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
 
 

arch/arm/Makefile

@@ -54,6 +54,7 @@ PLATFORM_CPPFLAGS += $(arch-y) $(tune-y)
 machine-$(CONFIG_ARCH_ASPEED)		+= aspeed
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_BCM283X)		+= bcm283x
+machine-$(CONFIG_ARCH_BCMSTB)		+= bcmstb
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
@@ -66,6 +67,7 @@ machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
 machine-$(CONFIG_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
+machine-$(CONFIG_ARCH_OWL)		+= owl
 machine-$(CONFIG_ARCH_S5PC1XX)		+= s5pc1xx
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_SNAPDRAGON)	+= snapdragon

arch/arm/config.mk

@@ -134,11 +134,11 @@ endif
 ifdef CONFIG_ARM64
 OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .data \
 		-j .u_boot_list -j .rela.dyn -j .got -j .got.plt \
-		-j .binman_sym_table
+		-j .binman_sym_table -j .text_rest
 else
 OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .hash \
 		-j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn \
-		-j .binman_sym_table
+		-j .binman_sym_table -j .text_rest
 endif
 
 # if a dtb section exists we always have to include it

arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c

@@ -15,7 +15,7 @@
 
 #include "mxs_init.h"
 
-static uint32_t dram_vals[] = {
+__weak uint32_t mxs_dram_vals[] = {
 /*
  * i.MX28 DDR2 at 200MHz
  */
@@ -100,11 +100,11 @@ static void initialize_dram_values(void)
 	int i;
 
 	debug("SPL: Setting mx28 board specific SDRAM parameters\n");
-	mxs_adjust_memory_params(dram_vals);
+	mxs_adjust_memory_params(mxs_dram_vals);
 
 	debug("SPL: Applying SDRAM parameters\n");
-	for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
-		writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+	for (i = 0; i < ARRAY_SIZE(mxs_dram_vals); i++)
+		writel(mxs_dram_vals[i], MXS_DRAM_BASE + (4 * i));
 }
 #else
 static void initialize_dram_values(void)
@@ -112,7 +112,7 @@ static void initialize_dram_values(void)
 	int i;
 
 	debug("SPL: Setting mx23 board specific SDRAM parameters\n");
-	mxs_adjust_memory_params(dram_vals);
+	mxs_adjust_memory_params(mxs_dram_vals);
 
 	/*
 	 * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as
@@ -124,10 +124,10 @@ static void initialize_dram_values(void)
 	 * So skip the initialization of these HW_DRAM_CTL registers.
 	 */
 	debug("SPL: Applying SDRAM parameters\n");
-	for (i = 0; i < ARRAY_SIZE(dram_vals); i++) {
+	for (i = 0; i < ARRAY_SIZE(mxs_dram_vals); i++) {
 		if (i == 8 || i == 27 || i == 28 || i == 35)
 			continue;
-		writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+		writel(mxs_dram_vals[i], MXS_DRAM_BASE + (4 * i));
 	}
 
 	/*

arch/arm/cpu/armv7/Kconfig

@@ -53,7 +53,7 @@ config ARMV7_PSCI_NR_CPUS
 config ARMV7_LPAE
 	bool "Use LPAE page table format" if EXPERT
 	depends on CPU_V7A
-	default n
+	default y if ARMV7_VIRT
 	---help---
 	Say Y here to use the long descriptor page table format. This is
 	required if U-Boot runs in HYP mode.

arch/arm/cpu/armv7/ls102xa/Kconfig

@@ -1,5 +1,7 @@
 config ARCH_LS1021A
 	bool
+	select SYS_FSL_DDR_BE if SYS_FSL_DDR
+	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
 	select SYS_FSL_ERRATUM_A008378
 	select SYS_FSL_ERRATUM_A008407
 	select SYS_FSL_ERRATUM_A008997
@@ -10,18 +12,16 @@ config ARCH_LS1021A
 	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_HAS_CCI400
-	select SYS_FSL_SRDS_1
-	select SYS_HAS_SERDES
-	select SYS_FSL_DDR_BE if SYS_FSL_DDR
-	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
 	select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
 	select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_5
 	select SYS_FSL_SEC_LE
+	select SYS_FSL_SRDS_1
+	select SYS_HAS_SERDES
+	imply CMD_PCI
 	imply SCSI
 	imply SCSI_AHCI
-	imply CMD_PCI
 
 menu "LS102xA architecture"
 	depends on ARCH_LS1021A

arch/arm/cpu/armv7/ls102xa/fdt.c

@@ -64,8 +64,8 @@ void ft_fixup_enet_phy_connect_type(void *fdt)
 		do_fixup_by_path(fdt, enet_path, "phy-connection-type",
 				 phy_string_for_interface(
 				 PHY_INTERFACE_MODE_RGMII_ID),
-				 sizeof(phy_string_for_interface(
-				 PHY_INTERFACE_MODE_RGMII_ID)),
+				 strlen(phy_string_for_interface(
+				 PHY_INTERFACE_MODE_RGMII_ID)) + 1,
 				 1);
 	}
 }

arch/arm/cpu/armv7/nonsec_virt.S

@@ -80,6 +80,8 @@ _secure_monitor:
 #ifdef CONFIG_ARMV7_VIRT
 	orreq	r5, r5, #0x100			@ allow HVC instruction
 	moveq	r6, #HYP_MODE			@ Enter the kernel as HYP
+	mrseq	r3, sp_svc
+	msreq	sp_hyp, r3			@ migrate SP
 #endif
 
 	mcr	p15, 0, r5, c1, c1, 0		@ write SCR (with NS bit set)

arch/arm/cpu/armv7/psci.S

@@ -331,6 +331,8 @@ ENTRY(psci_cpu_entry)
 
 	bl	_nonsec_init
 
+	bl	psci_stack_setup
+
 	bl	psci_arch_cpu_entry
 
 	bl	psci_get_cpu_id			@ CPU ID => r0

arch/arm/cpu/armv7/start.S

@@ -241,6 +241,14 @@ skip_errata_798870:
 skip_errata_801819:
 #endif
 
+#ifdef CONFIG_ARM_CORTEX_A15_CVE_2017_5715
+	mrc	p15, 0, r0, c1, c0, 1	@ read auxilary control register
+	orr	r0, r0, #1 << 0		@ Enable invalidates of BTB
+	push	{r1-r5}			@ Save the cpu info registers
+	bl	v7_arch_cp15_set_acr
+	pop	{r1-r5}			@ Restore the cpu info - fall through
+#endif
+
 #ifdef CONFIG_ARM_ERRATA_454179
 	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
 
@@ -252,12 +260,15 @@ skip_errata_801819:
 	pop	{r1-r5}			@ Restore the cpu info - fall through
 #endif
 
-#ifdef CONFIG_ARM_ERRATA_430973
+#if defined(CONFIG_ARM_ERRATA_430973) || defined (CONFIG_ARM_CORTEX_A8_CVE_2017_5715)
 	mrc	p15, 0, r0, c1, c0, 1	@ Read ACR
 
+#ifdef CONFIG_ARM_CORTEX_A8_CVE_2017_5715
+	orr	r0, r0, #(0x1 << 6)	@ Set IBE bit always to enable OS WA
+#else
 	cmp	r2, #0x21		@ Only on < r2p1
 	orrlt	r0, r0, #(0x1 << 6)	@ Set IBE bit
-
+#endif
 	push	{r1-r5}			@ Save the cpu info registers
 	bl	v7_arch_cp15_set_acr
 	pop	{r1-r5}			@ Restore the cpu info - fall through

arch/arm/cpu/armv8/Kconfig

@@ -1,5 +1,16 @@
 if ARM64
 
+config ARMV8_SPL_EXCEPTION_VECTORS
+	bool "Install crash dump exception vectors"
+	depends on SPL
+	default y
+	help
+	  The default exception vector table is only used for the crash
+	  dump, but still takes quite a lot of space in the image size.
+
+	  Say N here if you are running out of code space in the image
+	  and want to save some space at the cost of less debugging info.
+
 config ARMV8_MULTIENTRY
         bool "Enable multiple CPUs to enter into U-Boot"
 
@@ -44,8 +55,8 @@ config ARMV8_SPIN_TABLE
 menu "ARMv8 secure monitor firmware"
 config ARMV8_SEC_FIRMWARE_SUPPORT
 	bool "Enable ARMv8 secure monitor firmware framework support"
-	select OF_LIBFDT
 	select FIT
+	select OF_LIBFDT
 	help
 	  This framework is aimed at making secure monitor firmware load
 	  process brief.
@@ -60,8 +71,8 @@ config ARMV8_SEC_FIRMWARE_SUPPORT
 
 config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
 	bool "Enable ARMv8 secure monitor firmware framework support for SPL"
-	select SPL_OF_LIBFDT
 	select SPL_FIT
+	select SPL_OF_LIBFDT
 	help
 	  Say Y here to support this framework in SPL phase.
 

arch/arm/cpu/armv8/Makefile

@@ -10,7 +10,11 @@ ifndef CONFIG_$(SPL_TPL_)TIMER
 obj-$(CONFIG_SYS_ARCH_TIMER) += generic_timer.o
 endif
 obj-y	+= cache_v8.o
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_ARMV8_SPL_EXCEPTION_VECTORS) += exceptions.o
+else
 obj-y	+= exceptions.o
+endif
 obj-y	+= cache.o
 obj-y	+= tlb.o
 obj-y	+= transition.o

arch/arm/cpu/armv8/exceptions.S

@@ -11,7 +11,26 @@
 #include <linux/linkage.h>
 
 /*
- * Exception vectors.
+ * AArch64 exception vectors:
+ * We have four types of exceptions:
+ * - synchronous: traps, data aborts, undefined instructions, ...
+ * - IRQ: group 1 (normal) interrupts
+ * - FIQ: group 0 or secure interrupts
+ * - SError: fatal system errors
+ * There are entries for all four of those for different contexts:
+ * - from same exception level, when using the SP_EL0 stack pointer
+ * - from same exception level, when using the SP_ELx stack pointer
+ * - from lower exception level, when this is AArch64
+ * - from lower exception level, when this is AArch32
+ * Each of those 16 entries have space for 32 instructions, each entry must
+ * be 128 byte aligned, the whole table must be 2K aligned.
+ * The 32 instructions are not enough to save and restore all registers and
+ * to branch to the actual handler, so we split this up:
+ * Each entry saves the LR, branches to the save routine, then to the actual
+ * handler, then to the restore routine. The save and restore routines are
+ * each split in half and stuffed in the unused gap between the entries.
+ * Also as we do not run anything in a lower exception level, we just provide
+ * the first 8 entries for exceptions from the same EL.
  */
 	.align	11
 	.globl	vectors
@@ -22,52 +41,9 @@ vectors:
 	bl	do_bad_sync
 	b	exception_exit
 
-	.align	7		/* Current EL IRQ Thread */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_bad_irq
-	b	exception_exit
-
-	.align	7		/* Current EL FIQ Thread */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_bad_fiq
-	b	exception_exit
-
-	.align	7		/* Current EL Error Thread */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_bad_error
-	b	exception_exit
-
-	.align	7		 /* Current EL Synchronous Handler */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_sync
-	b	exception_exit
-
-	.align	7		 /* Current EL IRQ Handler */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_irq
-	b	exception_exit
-
-	.align	7		 /* Current EL FIQ Handler */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_fiq
-	b	exception_exit
-
-	.align	7		 /* Current EL Error Handler */
-	stp	x29, x30, [sp, #-16]!
-	bl	_exception_entry
-	bl	do_error
-	b	exception_exit
-
 /*
- * Enter Exception.
- * This will save the processor state that is ELR/X0~X30
- * to the stack frame.
+ * Save (most of) the GP registers to the stack frame.
+ * This is the first part of the shared routine called into from all entries.
  */
 _exception_entry:
 	stp	x27, x28, [sp, #-16]!
@@ -84,7 +60,19 @@ _exception_entry:
 	stp	x5, x6, [sp, #-16]!
 	stp	x3, x4, [sp, #-16]!
 	stp	x1, x2, [sp, #-16]!
+	b	_save_el_regs			/* jump to the second part */
 
+	.align	7		/* Current EL IRQ Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_irq
+	b	exception_exit
+
+/*
+ * Save exception specific context: ESR and ELR, for all exception levels.
+ * This is the second part of the shared routine called into from all entries.
+ */
+_save_el_regs:
 	/* Could be running at EL3/EL2/EL1 */
 	switch_el x11, 3f, 2f, 1f
 3:	mrs	x1, esr_el3
@@ -100,16 +88,36 @@ _exception_entry:
 	mov	x0, sp
 	ret
 
-
+	.align	7		/* Current EL FIQ Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_fiq
+				/* falling through to _exception_exit */
+/*
+ * Restore the exception return address, for all exception levels.
+ * This is the first part of the shared routine called into from all entries.
+ */
 exception_exit:
 	ldp	x2, x0, [sp],#16
 	switch_el x11, 3f, 2f, 1f
 3:	msr	elr_el3, x2
-	b	0f
+	b	_restore_regs
 2:	msr	elr_el2, x2
-	b	0f
+	b	_restore_regs
 1:	msr	elr_el1, x2
-0:
+	b	_restore_regs		/* jump to the second part */
+
+	.align	7		/* Current EL Error Thread */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_bad_error
+	b	exception_exit
+
+/*
+ * Restore the general purpose registers from the exception stack, then return.
+ * This is the second part of the shared routine called into from all entries.
+ */
+_restore_regs:
 	ldp	x1, x2, [sp],#16
 	ldp	x3, x4, [sp],#16
 	ldp	x5, x6, [sp],#16
@@ -126,3 +134,27 @@ exception_exit:
 	ldp	x27, x28, [sp],#16
 	ldp	x29, x30, [sp],#16
 	eret
+
+	.align	7		 /* Current EL (SP_ELx) Synchronous Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_sync
+	b	exception_exit
+
+	.align	7		 /* Current EL (SP_ELx) IRQ Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_irq
+	b	exception_exit
+
+	.align	7		 /* Current EL (SP_ELx) FIQ Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_fiq
+	b	exception_exit
+
+	.align	7		 /* Current EL (SP_ELx) Error Handler */
+	stp	x29, x30, [sp, #-16]!
+	bl	_exception_entry
+	bl	do_error
+	b	exception_exit

arch/arm/cpu/armv8/fsl-layerscape/Makefile

@@ -37,6 +37,7 @@ endif
 
 ifneq ($(CONFIG_ARCH_LS1046A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
+obj-y += icid.o ls1046_ids.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1088A),)

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -9,6 +9,7 @@
 #include <asm/io.h>
 #include <linux/errno.h>
 #include <asm/system.h>
+#include <fm_eth.h>
 #include <asm/armv8/mmu.h>
 #include <asm/io.h>
 #include <asm/arch/fsl_serdes.h>
@@ -18,7 +19,6 @@
 #include <fsl_immap.h>
 #include <asm/arch/mp.h>
 #include <efi_loader.h>
-#include <fm_eth.h>
 #include <fsl-mc/fsl_mc.h>
 #ifdef CONFIG_FSL_ESDHC
 #include <fsl_esdhc.h>

arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon

@@ -110,7 +110,7 @@ Example:
 			type = "ramdisk";
 			arch = "arm64";
 			os = "linux";
-			compression = "gzip";
+			compression = "none";
 			load = <0xa0000000>;
 		};
 	};
@@ -129,6 +129,16 @@ Example:
 
 The "loadables" is not optional. It tells SPL which images to load into memory.
 
+Falcon mode with QSPI boot
+--------------------------
+To use falcon mode with QSPI boot, SPL needs to be enabled. Similar to SD or
+NAND boot, a RAM version full feature U-Boot is needed. Unlike SD or NAND boot,
+SPL with QSPI doesn't need to combine SPL image with RAM version image. Two
+separated images are used, u-boot-spl.pbl and u-boot.img. The former is SPL
+image with RCW and PBI commands to load the SPL payload into On-Chip RAM. The
+latter is RAM version U-Boot in FIT format (or legacy format if FIT is not
+used).
+
 Other things to consider
 -----------------------
 Falcon boot skips a lot of initialization in U-Boot. If Linux expects the

arch/arm/cpu/armv8/fsl-layerscape/icid.c

@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <linux/libfdt.h>
+#include <fdt_support.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <fsl_fman.h>
+
+static void set_icid(struct icid_id_table *tbl, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+}
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+void set_fman_icids(struct fman_icid_id_table *tbl, int size)
+{
+	int i;
+	ccsr_fman_t *fm = (void *)CONFIG_SYS_FSL_FM1_ADDR;
+
+	for (i = 0; i < size; i++) {
+		out_be32(&fm->fm_bmi_common.fmbm_ppid[tbl[i].port_id - 1],
+			 tbl[i].icid);
+	}
+}
+#endif
+
+void set_icids(void)
+{
+	/* setup general icid offsets */
+	set_icid(icid_tbl, icid_tbl_sz);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	set_fman_icids(fman_icid_tbl, fman_icid_tbl_sz);
+#endif
+}
+
+int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids)
+{
+	int i, ret;
+	u32 prop[8];
+
+	/*
+	 * Note: The "iommus" property definition mentions Stream IDs while
+	 * this code handles ICIDs. The current implementation assumes that
+	 * ICIDs and Stream IDs are equal.
+	 */
+	for (i = 0; i < num_ids; i++) {
+		prop[i * 2] = cpu_to_fdt32(smmu_ph);
+		prop[i * 2 + 1] = cpu_to_fdt32(ids[i]);
+	}
+	ret = fdt_setprop(blob, off, "iommus",
+			  prop, sizeof(u32) * num_ids * 2);
+	if (ret) {
+		printf("WARNING unable to set iommus: %s\n", fdt_strerror(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+int fdt_fixup_icid_tbl(void *blob, int smmu_ph,
+		       struct icid_id_table *tbl, int size)
+{
+	int i, err, off;
+
+	for (i = 0; i < size; i++) {
+		if (!tbl[i].compat)
+			continue;
+
+		off = fdt_node_offset_by_compat_reg(blob,
+						    tbl[i].compat,
+						    tbl[i].compat_addr);
+		if (off > 0) {
+			err = fdt_set_iommu_prop(blob, off, smmu_ph,
+						 &tbl[i].id, 1);
+			if (err)
+				return err;
+		} else {
+			printf("WARNING could not find node %s: %s.\n",
+			       tbl[i].compat, fdt_strerror(off));
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+int get_fman_port_icid(int port_id, struct fman_icid_id_table *tbl,
+		       const int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++) {
+		if (tbl[i].port_id == port_id)
+			return tbl[i].icid;
+	}
+
+	return -1;
+}
+
+void fdt_fixup_fman_port_icid_by_compat(void *blob, int smmu_ph,
+					const char *compat)
+{
+	int noff, len, icid;
+	const u32 *prop;
+
+	noff = fdt_node_offset_by_compatible(blob, -1, compat);
+	while (noff > 0) {
+		prop = fdt_getprop(blob, noff, "cell-index", &len);
+		if (!prop) {
+			printf("WARNING missing cell-index for fman port\n");
+			continue;
+		}
+		if (len != 4) {
+			printf("WARNING bad cell-index size for fman port\n");
+			continue;
+		}
+
+		icid = get_fman_port_icid(fdt32_to_cpu(*prop),
+					  fman_icid_tbl, fman_icid_tbl_sz);
+		if (icid < 0) {
+			printf("WARNING unknown ICID for fman port %d\n",
+			       *prop);
+			continue;
+		}
+
+		fdt_set_iommu_prop(blob, noff, smmu_ph, (u32 *)&icid, 1);
+
+		noff = fdt_node_offset_by_compatible(blob, noff, compat);
+	}
+}
+
+void fdt_fixup_fman_icids(void *blob, int smmu_ph)
+{
+	static const char * const compats[] = {
+		"fsl,fman-v3-port-oh",
+		"fsl,fman-v3-port-rx",
+		"fsl,fman-v3-port-tx",
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(compats); i++)
+		fdt_fixup_fman_port_icid_by_compat(blob, smmu_ph, compats[i]);
+}
+#endif
+
+int fdt_get_smmu_phandle(void *blob)
+{
+	int noff, smmu_ph;
+
+	noff = fdt_node_offset_by_compatible(blob, -1, "arm,mmu-500");
+	if (noff < 0) {
+		printf("WARNING failed to get smmu node: %s\n",
+		       fdt_strerror(noff));
+		return noff;
+	}
+
+	smmu_ph = fdt_get_phandle(blob, noff);
+	if (!smmu_ph) {
+		smmu_ph = fdt_create_phandle(blob, noff);
+		if (!smmu_ph) {
+			printf("WARNING failed to get smmu phandle\n");
+			return -1;
+		}
+	}
+
+	return smmu_ph;
+}
+
+void fdt_fixup_icid(void *blob)
+{
+	int smmu_ph;
+
+	smmu_ph = fdt_get_smmu_phandle(blob);
+	if (smmu_ph < 0)
+		return;
+
+	fdt_fixup_icid_tbl(blob, smmu_ph, icid_tbl, icid_tbl_sz);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_icids(blob, smmu_ph);
+#endif
+}

arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c

@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch2.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
+};
+#endif
+
+struct icid_id_table icid_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
+	SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
+#endif
+
+	SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
+
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
+
+	SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_ETR_ICID(FSL_ETR_STREAM_ID),
+	SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+#ifdef CONFIG_FSL_CAAM
+	SET_SEC_QI_ICID(FSL_DPAA1_STREAM_ID_START + 2),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 3),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 4),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 5),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 6),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 7),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 8),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 9),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_DPAA1_STREAM_ID_START + 10),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_DPAA1_STREAM_ID_START + 11),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_DPAA1_STREAM_ID_START + 12),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_DPAA1_STREAM_ID_START + 13),
+#endif
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct fman_icid_id_table fman_icid_tbl[] = {
+	/* port id, icid */
+	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END),
+	SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END),
+};
+
+int fman_icid_tbl_sz = ARRAY_SIZE(fman_icid_tbl);
+#endif

arch/arm/cpu/armv8/fsl-layerscape/soc.c

@@ -6,13 +6,13 @@
 #include <common.h>
 #include <fsl_immap.h>
 #include <fsl_ifc.h>
-#include <ahci.h>
-#include <scsi.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
 #include <asm/io.h>
 #include <asm/global_data.h>
 #include <asm/arch-fsl-layerscape/config.h>
+#include <asm/arch-fsl-layerscape/ns_access.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
 #include <fsl_csu.h>
 #endif
@@ -330,36 +330,6 @@ void fsl_lsch3_early_init_f(void)
 #endif
 }
 
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci;
-
-#ifdef CONFIG_SYS_SATA2
-	ccsr_ahci  = (void *)CONFIG_SYS_SATA2;
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-#endif
-
-#ifdef CONFIG_SYS_SATA1
-	ccsr_ahci  = (void *)CONFIG_SYS_SATA1;
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
-	ahci_init((void __iomem *)CONFIG_SYS_SATA1);
-	scsi_scan(false);
-#endif
-
-	return 0;
-}
-#endif
-
 /* Get VDD in the unit mV from voltage ID */
 int get_core_volt_from_fuse(void)
 {
@@ -400,25 +370,6 @@ int get_core_volt_from_fuse(void)
 }
 
 #elif defined(CONFIG_FSL_LSCH2)
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-
-	/* Disable SATA ECC */
-	out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
-	ahci_init((void __iomem *)CONFIG_SYS_SATA);
-	scsi_scan(false);
-
-	return 0;
-}
-#endif
 
 static void erratum_a009929(void)
 {
@@ -665,6 +616,14 @@ void fsl_lsch2_early_init_f(void)
 			 CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
 	}
 
+	/*
+	 * Program Central Security Unit (CSU) to grant access
+	 * permission for USB 2.0 controller
+	 */
+#if defined(CONFIG_ARCH_LS1012A) && defined(CONFIG_USB_EHCI_FSL)
+	if (current_el() == 3)
+		set_devices_ns_access(CSU_CSLX_USB_2, CSU_ALL_RW);
+#endif
 	/* Erratum */
 	erratum_a008850_early(); /* part 1 of 2 */
 	erratum_a009929();
@@ -674,6 +633,10 @@ void fsl_lsch2_early_init_f(void)
 	erratum_a009798();
 	erratum_a008997();
 	erratum_a009007();
+
+#ifdef CONFIG_ARCH_LS1046A
+	set_icids();
+#endif
 }
 #endif
 
@@ -719,9 +682,6 @@ int qspi_ahb_init(void)
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
-#ifdef CONFIG_SCSI_AHCI_PLAT
-	sata_init();
-#endif
 #ifdef CONFIG_CHAIN_OF_TRUST
 	fsl_setenv_chain_of_trust();
 #endif

arch/arm/cpu/armv8/fsl-layerscape/spl.c

@@ -11,6 +11,7 @@
 #include <fsl_csu.h>
 #include <asm/arch/fdt.h>
 #include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -21,6 +22,9 @@ u32 spl_boot_device(void)
 #endif
 #ifdef CONFIG_SPL_NAND_SUPPORT
 	return BOOT_DEVICE_NAND;
+#endif
+#ifdef CONFIG_QSPI_BOOT
+	return BOOT_DEVICE_NOR;
 #endif
 	return 0;
 }
@@ -52,6 +56,7 @@ void spl_board_init(void)
 
 void board_init_f(ulong dummy)
 {
+	icache_enable();
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
 	board_early_init_f();
@@ -101,6 +106,9 @@ void board_init_f(ulong dummy)
 	gd->arch.tlb_addr = (gd->ram_top - gd->arch.tlb_size) & ~(0x10000 - 1);
 	gd->arch.tlb_allocated = gd->arch.tlb_addr;
 #endif	/* CONFIG_SPL_FSL_LS_PPA */
+#if defined(CONFIG_QSPI_AHB_INIT) && defined(CONFIG_QSPI_BOOT)
+	qspi_ahb_init();
+#endif
 }
 
 #ifdef CONFIG_SPL_OS_BOOT

arch/arm/cpu/armv8/generic_timer.c

@@ -20,27 +20,70 @@ unsigned long get_tbclk(void)
 	return cntfrq;
 }
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
 /*
- * Generic timer implementation of timer_read_counter()
+ * FSL erratum A-008585 says that the ARM generic timer counter "has the
+ * potential to contain an erroneous value for a small number of core
+ * clock cycles every time the timer value changes".
+ * This sometimes leads to a consecutive counter read returning a lower
+ * value than the previous one, thus reporting the time to go backwards.
+ * The workaround is to read the counter twice and only return when the value
+ * was the same in both reads.
+ * Assumes that the CPU runs in much higher frequency than the timer.
  */
 unsigned long timer_read_counter(void)
 {
 	unsigned long cntpct;
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
-	/* This erratum number needs to be confirmed to match ARM document */
 	unsigned long temp;
-#endif
+
 	isb();
 	asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
 	asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
 	while (temp != cntpct) {
 		asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
 		asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
 	}
-#endif
+
 	return cntpct;
 }
+#elif CONFIG_SUNXI_A64_TIMER_ERRATUM
+/*
+ * This erratum sometimes flips the lower 11 bits of the counter value
+ * to all 0's or all 1's, leading to jumps forwards or backwards.
+ * Backwards jumps might be interpreted all roll-overs and be treated as
+ * huge jumps forward.
+ * The workaround is to check whether the lower 11 bits of the counter are
+ * all 0 or all 1, then discard this value and read again.
+ * This occasionally discards valid values, but will catch all erroneous
+ * reads and fixes the problem reliably. Also this mostly requires only a
+ * single read, so does not have any significant overhead.
+ * The algorithm was conceived by Samuel Holland.
+ */
+unsigned long timer_read_counter(void)
+{
+	unsigned long cntpct;
+
+	isb();
+	do {
+		asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+	} while (((cntpct + 1) & GENMASK(10, 0)) <= 1);
+
+	return cntpct;
+}
+#else
+/*
+ * timer_read_counter() using the Arm Generic Timer (aka arch timer).
+ */
+unsigned long timer_read_counter(void)
+{
+	unsigned long cntpct;
+
+	isb();
+	asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
+
+	return cntpct;
+}
+#endif
 
 uint64_t get_ticks(void)
 {

arch/arm/cpu/armv8/start.S

@@ -86,14 +86,23 @@ pie_fixup_done:
 
 #ifdef CONFIG_SYS_RESET_SCTRL
 	bl reset_sctrl
+#endif
+
+#if defined(CONFIG_ARMV8__SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD)
+.macro	set_vbar, regname, reg
+	msr	\regname, \reg
+.endm
+	adr	x0, vectors
+#else
+.macro	set_vbar, regname, reg
+.endm
 #endif
 	/*
 	 * Could be EL3/EL2/EL1, Initial State:
 	 * Little Endian, MMU Disabled, i/dCache Disabled
 	 */
-	adr	x0, vectors
 	switch_el x1, 3f, 2f, 1f
-3:	msr	vbar_el3, x0
+3:	set_vbar vbar_el3, x0
 	mrs	x0, scr_el3
 	orr	x0, x0, #0xf			/* SCR_EL3.NS|IRQ|FIQ|EA */
 	msr	scr_el3, x0
@@ -103,11 +112,11 @@ pie_fixup_done:
 	msr	cntfrq_el0, x0			/* Initialize CNTFRQ */
 #endif
 	b	0f
-2:	msr	vbar_el2, x0
+2:	set_vbar	vbar_el2, x0
 	mov	x0, #0x33ff
 	msr	cptr_el2, x0			/* Enable FP/SIMD */
 	b	0f
-1:	msr	vbar_el1, x0
+1:	set_vbar	vbar_el1, x0
 	mov	x0, #3 << 20
 	msr	cpacr_el1, x0			/* Enable FP/SIMD */
 0:
@@ -345,6 +354,7 @@ ENDPROC(smp_kick_all_cpus)
 /*-----------------------------------------------------------------------*/
 
 ENTRY(c_runtime_cpu_setup)
+#if defined(CONFIG_ARMV8__SPL_EXCEPTION_VECTORS) || !defined(CONFIG_SPL_BUILD)
 	/* Relocate vBAR */
 	adr	x0, vectors
 	switch_el x1, 3f, 2f, 1f
@@ -354,6 +364,7 @@ ENTRY(c_runtime_cpu_setup)
 	b	0f
 1:	msr	vbar_el1, x0
 0:
+#endif
 
 	ret
 ENDPROC(c_runtime_cpu_setup)

arch/arm/cpu/armv8/u-boot.lds

@@ -25,6 +25,19 @@ SECTIONS
 	{
 		*(.__image_copy_start)
 		CPUDIR/start.o (.text*)
+	}
+
+	/* This needs to come before *(.text*) */
+	.efi_runtime : {
+                __efi_runtime_start = .;
+		*(.text.efi_runtime*)
+		*(.rodata.efi_runtime*)
+		*(.data.efi_runtime*)
+                __efi_runtime_stop = .;
+	}
+
+	.text_rest :
+	{
 		*(.text*)
 	}
 
@@ -98,17 +111,10 @@ SECTIONS
 
 	. = ALIGN(8);
 
-	.efi_runtime : {
-                __efi_runtime_start = .;
-		*(efi_runtime_text)
-		*(efi_runtime_data)
-                __efi_runtime_stop = .;
-	}
-
 	.efi_runtime_rel : {
                 __efi_runtime_rel_start = .;
-		*(.relaefi_runtime_text)
-		*(.relaefi_runtime_data)
+		*(.rel*.efi_runtime)
+		*(.rel*.efi_runtime.*)
                 __efi_runtime_rel_stop = .;
 	}
 

arch/arm/cpu/u-boot.lds

@@ -43,17 +43,36 @@ SECTIONS
 		*(.__image_copy_start)
 		*(.vectors)
 		CPUDIR/start.o (.text*)
+	}
+
+	/* This needs to come before *(.text*) */
+	.__efi_runtime_start : {
+		*(.__efi_runtime_start)
+	}
+
+	.efi_runtime : {
+		*(.text.efi_runtime*)
+		*(.rodata.efi_runtime*)
+		*(.data.efi_runtime*)
+	}
+
+	.__efi_runtime_stop : {
+		*(.__efi_runtime_stop)
+	}
+
+	.text_rest :
+	{
 		*(.text*)
 	}
 
 #ifdef CONFIG_ARMV7_NONSEC
 
 	/* Align the secure section only if we're going to use it in situ */
-	.__secure_start :
+	.__secure_start
 #ifndef CONFIG_ARMV7_SECURE_BASE
 		ALIGN(CONSTANT(COMMONPAGESIZE))
 #endif
-	{
+	: {
 		KEEP(*(.__secure_start))
 	}
 
@@ -136,27 +155,14 @@ SECTIONS
 
 	. = ALIGN(4);
 
-	.__efi_runtime_start : {
-		*(.__efi_runtime_start)
-	}
-
-	.efi_runtime : {
-		*(efi_runtime_text)
-		*(efi_runtime_data)
-	}
-
-	.__efi_runtime_stop : {
-		*(.__efi_runtime_stop)
-	}
-
 	.efi_runtime_rel_start :
 	{
 		*(.__efi_runtime_rel_start)
 	}
 
 	.efi_runtime_rel : {
-		*(.relefi_runtime_text)
-		*(.relefi_runtime_data)
+		*(.rel*.efi_runtime)
+		*(.rel*.efi_runtime.*)
 	}
 
 	.efi_runtime_rel_stop :

arch/arm/dts/Makefile

@@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3399-puma-ddr1866.dtb \
 	rv1108-evb.dtb
 dtb-$(CONFIG_ARCH_MESON) += \
+	meson-gxbb-nanopi-k2.dtb \
 	meson-gxbb-odroidc2.dtb \
+	meson-gxbb-nanopi-k2.dtb \
 	meson-gxl-s905x-p212.dtb \
 	meson-gxl-s905x-libretech-cc.dtb \
 	meson-gxl-s905x-khadas-vim.dtb
@@ -129,6 +131,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
 
 dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-cc108.dtb \
+	zynq-cse-nand.dtb \
+	zynq-cse-nor.dtb \
 	zynq-cse-qspi-single.dtb \
 	zynq-microzed.dtb \
 	zynq-minized.dtb \
@@ -145,11 +149,14 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc770-xm013.dtb \
 	zynq-zed.dtb \
 	zynq-zturn.dtb \
-	zynq-zybo.dtb
+	zynq-zybo.dtb \
+	zynq-zybo-z7.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += \
+	avnet-ultra96-rev1.dtb			\
 	zynqmp-mini-emmc0.dtb			\
 	zynqmp-mini-emmc1.dtb			\
 	zynqmp-mini-nand.dtb			\
+	zynqmp-mini-qspi.dtb			\
 	zynqmp-zcu100-revC.dtb			\
 	zynqmp-zcu102-revA.dtb			\
 	zynqmp-zcu102-revB.dtb			\
@@ -189,7 +196,6 @@ dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
 	socfpga_arria5_socdk.dtb			\
 	socfpga_arria10_socdk_sdmmc.dtb			\
 	socfpga_cyclone5_is1.dtb			\
-	socfpga_cyclone5_mcvevk.dtb			\
 	socfpga_cyclone5_socdk.dtb			\
 	socfpga_cyclone5_dbm_soc1.dtb			\
 	socfpga_cyclone5_de0_nano_soc.dtb		\
@@ -358,6 +364,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-tbs-a711.dts
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-libretech-all-h3-cc.dtb \
@@ -381,9 +388,13 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
 	sun50i-h5-libretech-all-h3-cc.dtb \
 	sun50i-h5-nanopi-neo2.dtb \
 	sun50i-h5-nanopi-neo-plus2.dtb \
+	sun50i-h5-orangepi-zero-plus.dtb \
 	sun50i-h5-orangepi-pc2.dtb \
 	sun50i-h5-orangepi-prime.dtb \
 	sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_MACH_SUN50I_H6) += \
+	sun50i-h6-orangepi-one-plus.dtb \
+	sun50i-h6-pine-h64.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-amarula-relic.dtb \
 	sun50i-a64-bananapi-m64.dtb \
@@ -391,7 +402,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \
 	sun50i-a64-olinuxino.dtb \
 	sun50i-a64-orangepi-win.dtb \
 	sun50i-a64-pine64-plus.dtb \
-	sun50i-a64-pine64.dtb
+	sun50i-a64-pine64.dtb \
+	sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb \
@@ -425,15 +437,18 @@ dtb-$(CONFIG_MX6SX) += \
 	imx6sx-sdb.dtb
 
 dtb-$(CONFIG_MX6UL) += \
-	imx6ul-geam-kit.dtb \
+	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
-	imx6ul-opos6uldev.dtb
+	imx6ul-opos6uldev.dtb \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-9x9-evk.dtb
 
 dtb-$(CONFIG_MX6ULL) += imx6ull-14x14-evk.dtb
 
 dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
-	imx7d-sdb.dtb
+	imx7d-sdb.dtb \
+	imx7d-sdb-qspi.dtb
 
 dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
 
@@ -511,9 +526,6 @@ dtb-$(CONFIG_TARGET_SAMA5D3XEK) += \
 dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
 	at91-sama5d3_xplained.dtb
 
-dtb-$(CONFIG_TARGET_MA5D4EK) += \
-	at91-sama5d4_ma5d4evk.dts.dtb
-
 dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
 	at91-sama5d4ek.dtb
 
@@ -537,7 +549,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb
 dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
 
 dtb-$(CONFIG_TARGET_STM32MP1) += \
-	stm32mp157c-ed1.dtb
+	stm32mp157c-ed1.dtb \
+	stm32mp157c-ev1.dtb
 
 targets += $(dtb-y)
 

arch/arm/dts/am335x-brppt1-mmc.dts

@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRPPT1 (MMC) Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		version		= <0x0100>;
+		order-no	= "6PPT30 (MMC)";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		serial-no	= "0";
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x1>;
+	};
+
+	aliases {
+		ds1bkl0 = &pwmbacklight;
+		ds1bkl1 = &tps_bl;
+		ds1timing = &timing0;
+		ds1ctrl = &lcdc;
+		gpmc = &gpmc;
+		mmc = &mmc2;
+		fset = &fset;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		status = "disabled";
+
+		compatible = "ti,tilcdc,panel";
+		enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+
+		backlight = <&pwmbacklight>;
+		bkl-pwm = <&pwmbacklight>;
+		bkl-tps = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <32000000>;
+				hactive		= <800>;
+				vactive		= <480>;
+				hfront-porch	= <2>;
+				hback-porch	= <192>;
+				hsync-len	= <1>;
+				vfront-porch	= <20>;
+				vback-porch	= <2>;
+				vsync-len	= <1>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwm0: omap-pwm@timer5 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer5>;
+		#pwm-cells = <3>;
+	};
+
+	pwm1: omap-pwm@timer6 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer6>;
+		#pwm-cells = <3>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm0 0 0 0>;
+	};
+
+	pwmbacklight: pwm-bkl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+
+		default-brightness-level = <255>;
+		brightness-levels = <0 16 32 64 128 170 202 234 255>;
+
+		power-supply = <&vmmcsd_fixed>;
+		enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	dual_emac_res_vlan = <1>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	dual_emac_res_vlan = <2>;
+	phy-mode = "mii";
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&lcdc {
+	status = "disabled";
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&wdt2 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,zx-cutoff-ratio = <40>;
+		ti,min_deviation = <60>;
+		ti,max_deviation = <600>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+
+		bnr-buttons {
+			Home-Button {};
+		};
+	};
+
+	adc {
+		ti,adc-channels = <5 6 7>;
+	};
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};

arch/arm/dts/am335x-brppt1-nand.dts

@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRPPT1 (NAND) Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		version		= <0x0100>;
+		order-no	= "6PPT30 (NAND)";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		serial-no	= "0";
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x1>;
+	};
+
+	aliases {
+		ds1bkl0 = &pwmbacklight;
+		ds1bkl1 = &tps_bl;
+		ds1timing = &timing0;
+		ds1ctrl = &lcdc;
+		gpmc = &gpmc;
+		mmc = &mmc2;
+		fset = &fset;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		status = "disabled";
+
+		compatible = "ti,tilcdc,panel";
+		enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+
+		backlight = <&pwmbacklight>;
+		bkl-pwm = <&pwmbacklight>;
+		bkl-tps = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <32000000>;
+				hactive		= <800>;
+				vactive		= <480>;
+				hfront-porch	= <2>;
+				hback-porch	= <192>;
+				hsync-len	= <1>;
+				vfront-porch	= <20>;
+				vback-porch	= <2>;
+				vsync-len	= <1>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwm0: omap-pwm@timer5 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer5>;
+		#pwm-cells = <3>;
+	};
+
+	pwm1: omap-pwm@timer6 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer6>;
+		#pwm-cells = <3>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm0 0 0 0>;
+	};
+
+	pwmbacklight: pwm-bkl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+
+		default-brightness-level = <255>;
+		brightness-levels = <0 16 32 64 128 170 202 234 255>;
+
+		power-supply = <&vmmcsd_fixed>;
+		enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	dual_emac;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	dual_emac_res_vlan = <1>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	dual_emac_res_vlan = <2>;
+	phy-mode = "mii";
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "disabled";
+};
+
+&lcdc {
+	status = "disabled";
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&wdt2 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,zx-cutoff-ratio = <40>;
+		ti,min_deviation = <60>;
+		ti,max_deviation = <600>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+
+		bnr-buttons {
+			Home-Button {};
+		};
+	};
+
+	adc {
+		ti,adc-channels = <5 6 7>;
+	};
+};
+
+&gpmc {
+	u-boot,dm-spl;
+	status = "okay";
+	pinctrl-names = "default";
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		rb-gpios = <&gpmc 1 GPIO_ACTIVE_HIGH>; /* gpmc_wait1 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wait-pin = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.MLO";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.cfgscr";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.dtb";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.u-boot-env";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.kernel";
+			reg = <0x00100000 0x00400000>;
+		};
+		partition@6 {
+			label = "NAND.rootfs";
+			reg = <0x00500000 0x08000000>;
+		};
+		partition@7 {
+			label = "NAND.user";
+			reg = <0x08500000 0x17b00000>;
+		};
+	};
+};

arch/arm/dts/am335x-brppt1-spi.dts

@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 B&R Industrial Automation GmbH
+ * http://www.br-automation.com
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "BRPPT1 (MMC) Panel";
+	compatible = "ti,am33xx";
+
+	fset: factory-settings {
+		bl-version	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		version		= <0x0100>;
+		order-no	= "6PPT30 (SPI)";
+		hw-revision	= "ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456890";
+		serial-no	= "0";
+		device-id	= <0x0>;
+		parent-id	= <0x0>;
+		hw-variant	= <0x1>;
+	};
+
+	aliases {
+		ds1bkl0 = &pwmbacklight;
+		ds1bkl1 = &tps_bl;
+		ds1timing = &timing0;
+		ds1ctrl = &lcdc;
+		gpmc = &gpmc;
+		mmc = &mmc2;
+		spi0 = &spi0;
+		fset = &fset;
+	};
+
+	chosen {
+		bootargs = "console=ttyO0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	panel {
+		status = "disabled";
+
+		compatible = "ti,tilcdc,panel";
+		enable-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+
+		backlight = <&pwmbacklight>;
+		bkl-pwm = <&pwmbacklight>;
+		bkl-tps = <&tps_bl>;
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <32>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: lcd {
+				clock-frequency	= <32000000>;
+				hactive		= <800>;
+				vactive		= <480>;
+				hfront-porch	= <2>;
+				hback-porch	= <192>;
+				hsync-len	= <1>;
+				vfront-porch	= <20>;
+				vback-porch	= <2>;
+				vsync-len	= <1>;
+				hsync-active	= <1>;
+				vsync-active	= <1>;
+				pupdelay	= <10>;
+				pondelay	= <10>;
+			};
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	pwm0: omap-pwm@timer5 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer5>;
+		#pwm-cells = <3>;
+	};
+
+	pwm1: omap-pwm@timer6 {
+		compatible = "ti,omap-dmtimer-pwm";
+		ti,timers = <&timer6>;
+		#pwm-cells = <3>;
+	};
+
+	beeper: pwm-beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm0 0 0 0>;
+	};
+
+	pwmbacklight: pwm-bkl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+
+		default-brightness-level = <255>;
+		brightness-levels = <0 16 32 64 128 170 202 234 255>;
+
+		power-supply = <&vmmcsd_fixed>;
+		enable-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart0 {		/* console uart */
+	u-boot,dm-spl;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	u-boot,dm-spl;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {		/* PMIC controller */
+		u-boot,dm-spl;
+		reg = <0x24>;
+		compatible = "ti,tps65217";
+
+		tps_bl: backlight {
+			compatible = "ti,tps65217-bl";
+			isel = <1>;	/* 1 - ISET1, 2 ISET2 */
+			fdim = <1000>;	/* TPS65217_BL_FDIM_1kHZ */
+			default-brightness = <50>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi0 {
+	u-boot,dm-spl;
+	status = "okay";
+
+	cs-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>,
+		   <&gpio0 6 GPIO_ACTIVE_HIGH>,
+		   <0>,
+		   <0>;
+
+	spi-max-frequency = <24000000>;
+
+	spi_flash: spiflash@0 {
+		u-boot,dm-spl;
+		u-boot,dm-pre-reloc;
+		compatible = "spidev", "spi-flash";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <2>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	dual_emac_res_vlan = <1>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&phy1>;
+	dual_emac_res_vlan = <2>;
+	phy-mode = "mii";
+};
+
+&mmc1 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&mmc2 {
+	u-boot,dm-spl;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x8>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	ti,vcc-aux-disable-is-sleep;
+	status = "okay";
+};
+
+&lcdc {
+	status = "disabled";
+};
+
+&elm {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio1 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&gpio3 {
+	u-boot,dm-spl;
+	ti,no-reset-on-init;
+};
+
+&wdt2 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,zx-cutoff-ratio = <40>;
+		ti,min_deviation = <60>;
+		ti,max_deviation = <600>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+
+		bnr-buttons {
+			Home-Button {};
+		};
+	};
+
+	adc {
+		ti,adc-channels = <5 6 7>;
+	};
+};
+
+&timer6 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&timer7 {		/* used for cpsw end device */
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&wdt2 {
+	status = "okay";
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "okay";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&aes {
+	status = "disabled";
+};
+
+&rng {
+	status = "disabled";
+};

arch/arm/dts/am33xx.dtsi

@@ -91,6 +91,7 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
+		u-boot,dm-spl;
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/dts/am3517-evm-u-boot.dtsi

@@ -9,3 +9,19 @@
 		stdout-path = &uart3;
 	};
 };
+
+&mmc1 {
+	cd-inverted;
+};
+
+&uart1 {
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};

arch/arm/dts/am3517-evm.dts

@@ -8,11 +8,17 @@
 /dts-v1/;
 
 #include "am3517.dtsi"
+#include "am3517-som.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
 	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
+	aliases {
+		display0 = &lcd0;
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
@@ -24,6 +30,144 @@
                 regulator-min-microvolt = <3300000>;
                 regulator-max-microvolt = <3300000>;
         };
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		user_pb {
+			label = "User Push Button";
+			linux,code = <BTN_0>;
+			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_1 {
+			label = "User Switch 1";
+			linux,code = <BTN_1>;
+			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_2 {
+			label = "User Switch 2";
+			linux,code = <BTN_2>;
+			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_3 {
+			label = "User Switch 3";
+			linux,code = <BTN_3>;
+			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_4 {
+			label = "User Switch 4";
+			linux,code = <BTN_4>;
+			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_5 {
+			label = "User Switch 5";
+			linux,code = <BTN_5>;
+			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_6 {
+			label = "User Switch 6";
+			linux,code = <BTN_6>;
+			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_7 {
+			label = "User Switch 7";
+			linux,code = <BTN_7>;
+			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
+		};
+
+		user_sw_8 {
+			label = "User Switch 8";
+			linux,code = <BTN_8>;
+			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		user_led_1 {
+			label = "am3517evm:green:user_led_1";
+			gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_2 {
+			label = "am3517evm:green:user_led_2";
+			gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_3 {
+			label = "am3517evm:green:user_led_3";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0"; /* SD/MMC card activity */
+		};
+
+		user_led_4 {
+			label = "am3517evm:green:user_led_4";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "15";
+		status = "okay";
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <4>;
+			vsync-len = <11>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm11 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
+	};
+
+	pwm11: dmtimer-pwm@11 {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+	};
 };
 
 &davinci_emac {
@@ -34,12 +178,32 @@
 	     status = "okay";
 };
 
-&i2c1 {
-	clock-frequency = <400000>;
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vdd_io_reg>;
+	vdda_video-supply = <&vdd_io_reg>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
 };
 
 &i2c2 {
 	clock-frequency = <400000>;
+	/* User DIP swithes [1:8] / User LEDS [1:2] */
+	tca6416: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &i2c3 {
@@ -47,8 +211,13 @@
 };
 
 &mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
 };
 
 &mmc2 {
@@ -59,3 +228,63 @@
       status = "disabled";
 };
 
+&omap3_pmx_core {
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
+		>;
+	};
+
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
+		>;
+	};
+};

arch/arm/dts/am3517-som.dtsi

@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * Based on am3517-evm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_core_reg>;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name = "micron,mt29f4g16abchch";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	s35390a: s35390a@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins>;
+		interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
+	};
+
+	tps: tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			vdd_core_reg: VDCDC1 {
+				regulator-name = "vdd_core";
+				compatible = "regulator-fixed";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vdd_io_reg: VDCDC2 {
+				regulator-name = "vdd_io";
+				compatible = "regulator-fixed";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_1v8_reg: VDCDC3 {
+				regulator-name = "vdd_1v8";
+				compatible = "regulator-fixed";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb18_reg: LDO1 {
+				regulator-name = "vdd_usb18";
+				compatible = "regulator-fixed";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb33_reg: LDO2 {
+				regulator-name = "vdd_usb33";
+				compatible = "regulator-fixed";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	touchscreen: tsc2004@4b {
+		compatible = "ti,tsc2004";
+		reg = <0x4b>;
+
+		vio-supply = <&vdd_io_reg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&omap3_pmx_core {
+
+	rtc_pins: pinmux_rtc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+		>;
+	};
+};

arch/arm/dts/am3517.dtsi

@@ -39,6 +39,8 @@
 			ti,davinci-ctrl-ram-size = <0x2000>;
 			ti,davinci-rmii-en = /bits/ 8 <1>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
+			clocks = <&emac_ick>;
+			clock-names = "ick";
 		};
 
 		davinci_mdio: ethernet@5c030000 {
@@ -49,6 +51,8 @@
 			bus_freq = <1000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&emac_fck>;
+			clock-names = "fck";
 		};
 
 		uart4: serial@4809e000 {

arch/arm/dts/armada-388-clearfog-u-boot.dtsi

@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&spi1 {
+	u-boot,dm-spl;
+
+	spi-flash@0 {
+		u-boot,dm-spl;
+	};
+};

arch/arm/dts/armada-388-clearfog.dts

@@ -50,6 +50,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
 
 / {
 	model = "SolidRun Clearfog A1";
@@ -70,11 +71,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -84,211 +80,7 @@
 	};
 
 	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-
 		internal-regs {
-			ethernet@30000 {
-				mac-address = [00 50 43 02 02 02];
-				phy-mode = "sgmii";
-				status = "okay";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ethernet@34000 {
-				mac-address = [00 50 43 02 02 03];
-				managed = "in-band-status";
-				phy-mode = "sgmii";
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				mac-address = [00 50 43 02 02 01];
-				pinctrl-0 = <&ge0_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy_dedicated>;
-				phy-mode = "rgmii-id";
-				status = "okay";
-			};
-
-			i2c@11000 {
-				/* Is there anything on this? */
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				/*
-				 * PCA9655 GPIO expander, up to 1MHz clock.
-				 *  0-CON3 CLKREQ#
-				 *  1-CON3 PERST#
-				 *  2-CON2 PERST#
-				 *  3-CON3 W_DISABLE
-				 *  4-CON2 CLKREQ#
-				 *  5-USB3 overcurrent
-				 *  6-USB3 power
-				 *  7-CON2 W_DISABLE
-				 *  8-JP4 P1
-				 *  9-JP4 P4
-				 * 10-JP4 P5
-				 * 11-m.2 DEVSLP
-				 * 12-SFP_LOS
-				 * 13-SFP_TX_FAULT
-				 * 14-SFP_TX_DISABLE
-				 * 15-SFP_MOD_DEF0
-				 */
-				expander0: gpio-expander@20 {
-					/*
-					 * This is how it should be:
-					 * compatible = "onnn,pca9655",
-					 *	 "nxp,pca9555";
-					 * but you can't do this because of
-					 * the way I2C works.
-					 */
-					compatible = "nxp,pca9555";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x20>;
-
-					pcie1_0_clkreq {
-						gpio-hog;
-						gpios = <0 GPIO_ACTIVE_LOW>;
-						input;
-						line-name = "pcie1.0-clkreq";
-					};
-					pcie1_0_w_disable {
-						gpio-hog;
-						gpios = <3 GPIO_ACTIVE_LOW>;
-						output-low;
-						line-name = "pcie1.0-w-disable";
-					};
-					pcie2_0_clkreq {
-						gpio-hog;
-						gpios = <4 GPIO_ACTIVE_LOW>;
-						input;
-						line-name = "pcie2.0-clkreq";
-					};
-					pcie2_0_w_disable {
-						gpio-hog;
-						gpios = <7 GPIO_ACTIVE_LOW>;
-						output-low;
-						line-name = "pcie2.0-w-disable";
-					};
-					usb3_ilimit {
-						gpio-hog;
-						gpios = <5 GPIO_ACTIVE_LOW>;
-						input;
-						line-name = "usb3-current-limit";
-					};
-					usb3_power {
-						gpio-hog;
-						gpios = <6 GPIO_ACTIVE_HIGH>;
-						output-high;
-						line-name = "usb3-power";
-					};
-					m2_devslp {
-						gpio-hog;
-						gpios = <11 GPIO_ACTIVE_HIGH>;
-						output-low;
-						line-name = "m.2 devslp";
-					};
-				};
-
-				/* The MCP3021 is 100kHz clock only */
-				mikrobus_adc: mcp3021@4c {
-					compatible = "microchip,mcp3021";
-					reg = <0x4c>;
-				};
-
-				/* Also something at 0x64 */
-			};
-
-			i2c@11100 {
-				/*
-				 * Routed to SFP, mikrobus, and PCIe.
-				 * SFP limits this to 100kHz, and requires
-				 *  an AT24C01A/02/04 with address pins tied
-				 *  low, which takes addresses 0x50 and 0x51.
-				 * Mikrobus doesn't specify beyond an I2C
-				 *  bus being present.
-				 * PCIe uses ARP to assign addresses, or
-				 *  0x63-0x64.
-				 */
-				clock-frequency = <100000>;
-				pinctrl-0 = <&clearfog_i2c1_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-			};
-
-			mdio@72004 {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-
-				phy_dedicated: ethernet-phy@0 {
-					/*
-					 * Annoyingly, the marvell phy driver
-					 * configures the LED register, rather
-					 * than preserving reset-loaded setting.
-					 * We undo that rubbish here.
-					 */
-					marvell,reg-init = <3 16 0 0x101e>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@18000 {
-				clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
-					marvell,pins = "mpp46";
-					marvell,function = "ref";
-				};
-				clearfog_dsa0_pins: clearfog-dsa0-pins {
-					marvell,pins = "mpp23", "mpp41";
-					marvell,function = "gpio";
-				};
-				clearfog_i2c1_pins: i2c1-pins {
-					/* SFP, PCIe, mSATA, mikrobus */
-					marvell,pins = "mpp26", "mpp27";
-					marvell,function = "i2c1";
-				};
-				clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-				clearfog_sdhci_pins: clearfog-sdhci-pins {
-					marvell,pins = "mpp21", "mpp28",
-						       "mpp37", "mpp38",
-						       "mpp39", "mpp40";
-					marvell,function = "sd0";
-				};
-				clearfog_spi1_cs_pins: spi1-cs-pins {
-					marvell,pins = "mpp55";
-					marvell,function = "spi1";
-				};
-				mikro_pins: mikro-pins {
-					/* int: mpp22 rst: mpp29 */
-					marvell,pins = "mpp22", "mpp29";
-					marvell,function = "gpio";
-				};
-				mikro_spi_pins: mikro-spi-pins {
-					marvell,pins = "mpp43";
-					marvell,function = "spi1";
-				};
-				mikro_uart_pins: mikro-uart-pins {
-					marvell,pins = "mpp24", "mpp25";
-					marvell,function = "ua1";
-				};
-				rear_button_pins: rear-button-pins {
-					marvell,pins = "mpp34";
-					marvell,function = "gpio";
-				};
-			};
-
 			rtc@a3800 {
 				/*
 				 * If the rtc doesn't work, run "date reset"
@@ -311,7 +103,7 @@
 				bus-width = <4>;
 				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 				no-1-8-v;
-				pinctrl-0 = <&clearfog_sdhci_pins
+				pinctrl-0 = <&microsom_sdhci_pins
 					     &clearfog_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
@@ -319,13 +111,6 @@
 				wp-inverted;
 			};
 
-			serial@12000 {
-				pinctrl-0 = <&uart0_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				u-boot,dm-pre-reloc;
-			};
-
 			serial@12100 {
 				/* mikrobus uart */
 				pinctrl-0 = <&mikro_uart_pins>;
@@ -342,17 +127,10 @@
 				pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
 				pinctrl-names = "default";
 				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "w25q32", "jedec,spi-nor", "spi-flash";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <3000000>;
-				};
 			};
 
-			usb3@f8000 {
+			usb0: usb3@f8000 {
+				/* CON7, USB-A port on back of device */
 				status = "okay";
 			};
 		};
@@ -376,72 +154,6 @@
 		};
 	};
 
-	sfp: sfp {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
-		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-		moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-		sfp,ethernet = <&eth2>;
-		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-	};
-
-	dsa@0 {
-		compatible = "marvell,dsa";
-		dsa,ethernet = <&eth1>;
-		dsa,mii-bus = <&mdio>;
-		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
-		pinctrl-names = "default";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		switch@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4 0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan5";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-
-			port@6 {
-				/* 88E1512 external phy */
-				reg = <6>;
-				label = "lan6";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&rear_button_pins>;
@@ -457,6 +169,159 @@
 	};
 };
 
+&w25q32 {
+	status = "okay";
+};
+
+&eth1 {
+	managed = "in-band-status";
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&eth2 {
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		/*
+		 * This is how it should be:
+		 * compatible = "onnn,pca9655",
+		 *	 "nxp,pca9555";
+		 * but you can't do this because of
+		 * the way I2C works.
+		 */
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+
+		pcie1_0_clkreq {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+		pcie1_0_w_disable {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+		pcie2_0_clkreq {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie2.0-clkreq";
+		};
+		pcie2_0_w_disable {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie2.0-w-disable";
+		};
+		usb3_ilimit {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+		usb3_power {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "usb3-power";
+		};
+		m2_devslp {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	mikrobus_adc: mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * Routed to SFP, mikrobus, and PCIe.
+	 * SFP limits this to 100kHz, and requires
+	 *  an AT24C01A/02/04 with address pins tied
+	 *  low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C
+	 *  bus being present.
+	 * PCIe uses ARP to assign addresses, or
+	 *  0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&clearfog_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	clearfog_i2c1_pins: i2c1-pins {
+		/* SFP, PCIe, mSATA, mikrobus */
+		marvell,pins = "mpp26", "mpp27";
+		marvell,function = "i2c1";
+	};
+	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	mikro_pins: mikro-pins {
+		/* int: mpp22 rst: mpp29 */
+		marvell,pins = "mpp22", "mpp29";
+		marvell,function = "gpio";
+	};
+	mikro_spi_pins: mikro-spi-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "spi1";
+	};
+	mikro_uart_pins: mikro-uart-pins {
+		marvell,pins = "mpp24", "mpp25";
+		marvell,function = "ua1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
 /*
 +#define A38x_CUSTOMER_BOARD_1_MPP16_23         0x00400011
 MPP18: gpio		? (pca9655 int?)

arch/arm/dts/armada-388-helios4.dts

@@ -248,7 +248,7 @@
 				bus-width = <4>;
 				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 				no-1-8-v;
-				pinctrl-0 = <&helios_sdhci_pins
+				pinctrl-0 = <&microsom_sdhci_pins
 					     &helios_sdhci_cd_pins>;
 				pinctrl-names = "default";
 				status = "okay";
@@ -286,12 +286,6 @@
 					marvell,pins = "mpp20";
 					marvell,function = "gpio";
 				};
-				helios_sdhci_pins: helios-sdhci-pins {
-					marvell,pins = "mpp21", "mpp28",
-						       "mpp37", "mpp38",
-						       "mpp39", "mpp40";
-					marvell,function = "sd0";
-				};
 				helios_led_pins: helios-led-pins {
 					marvell,pins = "mpp24", "mpp25",
 						       "mpp49", "mpp50",

arch/arm/dts/armada-38x-solidrun-microsom.dtsi

@@ -86,7 +86,7 @@
 	w25q32: spi-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
+		compatible = "w25q32", "jedec,spi-nor", "spi-flash";
 		reg = <0>; /* Chip select 0 */
 		spi-max-frequency = <3000000>;
 		status = "disabled";

arch/arm/dts/at91-sama5d4_ma5d4.dtsi

@@ -1,142 +0,0 @@
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "sama5d4.dtsi"
-
-/ {
-	model = "Aries/DENX MA5D4";
-	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-
-		clk20m: clk20m {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <20000000>;
-			clock-output-names = "clk20m";
-		};
-	};
-
-	ahb {
-		apb {
-			mmc0: mmc@f8000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
-				vmmc-supply = <&vcc_mmc0_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <8>;
-					broken-cd;
-				};
-			};
-
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
-				status = "okay";
-
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			i2c0: i2c@f8014000 {
-				status = "okay";
-			};
-
-			spi1: spi@fc018000 {
-				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
-				status = "okay";
-
-				can0: can@0 {
-					compatible = "microchip,mcp2515";
-					reg = <0>;
-					clocks = <&clk20m>;
-					interrupt-parent = <&pioE>;
-					interrupts = <6 IRQ_TYPE_EDGE_RISING>;
-					spi-max-frequency = <10000000>;
-				};
-
-				can1: can@1 {
-					compatible = "microchip,mcp2515";
-					reg = <1>;
-					clocks = <&clk20m>;
-					interrupt-parent = <&pioE>;
-					interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-					spi-max-frequency = <10000000>;
-				};
-			};
-
-			tcb2: timer@fc024000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			adc0: adc@fc034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <
-					/* external trigger conflicts with USBA_VBUS */
-					&pinctrl_adc0_ad0
-					&pinctrl_adc0_ad1
-					&pinctrl_adc0_ad2
-					&pinctrl_adc0_ad3
-					&pinctrl_adc0_ad4
-					>;
-				atmel,adc-vref = <3300>;
-				status = "okay";
-			};
-
-			watchdog@fc068640 {
-				status = "okay";
-			};
-		};
-	};
-
-	vcc_3v3_reg: fixedregulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC 3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vcc_mmc0_reg: fixedregulator_mmc0 {
-		compatible = "regulator-fixed";
-		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
-		regulator-name = "RST_n MCI0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-		regulator-boot-on;
-	};
-};

arch/arm/dts/at91-sama5d4_ma5d4evk.dts

@@ -1,149 +0,0 @@
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "at91-sama5d4_ma5d4.dtsi"
-
-/ {
-	model = "Aries/DENX MA5D4EVK";
-	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
-
-	chosen {
-		stdout-path = "serial3:115200n8";
-	};
-
-	ahb {
-		apb {
-			hlcdc: hlcdc@f0000000 {
-				status = "okay";
-
-				hlcdc-display-controller {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
-					port@0 {
-						hlcdc_panel_output: endpoint@0 {
-							reg = <0>;
-							remote-endpoint = <&panel_input>;
-						};
-					};
-				};
-
-			};
-
-			macb0: ethernet@f8020000 {
-				phy-mode = "rmii";
-				status = "okay";
-
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
-			usart0: serial@f802c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f8030000 {
-				status = "okay";
-			};
-
-			mmc1: mmc@fc000000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
-				vmmc-supply = <&vcc_mmc1_reg>;
-				vqmmc-supply = <&vcc_3v3_reg>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioE 5 0>;
-				};
-			};
-
-			adc0: adc@fc034000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-			};
-
-
-			pinctrl@fc06a000 {
-				board {
-					pinctrl_mmc1_cd: mmc1_cd {
-						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
-					};
-					pinctrl_usba_vbus: usba_vbus {
-						atmel,pins =
-							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
-					};
-				};
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		status = "okay";
-
-		user1 {
-			label = "user1";
-			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user2 {
-			label = "user2";
-			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user3 {
-			label = "user3";
-			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	panel: panel {
-		/* Actually Ampire 800480R2 */
-		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
-		backlight = <&backlight>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			panel_input: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&hlcdc_panel_output>;
-			};
-		};
-	};
-
-	vcc_mmc1_reg: fixedregulator_mmc1 {
-		compatible = "regulator-fixed";
-		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
-		regulator-name = "VDD MCI1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_reg>;
-	};
-};

arch/arm/dts/avnet-ultra96-rev1.dts

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};

arch/arm/dts/axp803.dtsi

@@ -0,0 +1,155 @@
+/*
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP803 Integrated Power Management Chip
+ * http://files.pine64.org/doc/datasheet/pine64/AXP803_Datasheet_V1.0.pdf
+ */
+
+&axp803 {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dcdc6: dcdc6 {
+			regulator-name = "dcdc6";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_fldo1: fldo1 {
+			regulator-name = "fldo1";
+		};
+
+		reg_fldo2: fldo2 {
+			regulator-name = "fldo2";
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			regulator-name = "ldo-io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			regulator-name = "ldo-io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc-ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+};

arch/arm/dts/axp81x.dtsi

@@ -0,0 +1,169 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio0_ldo: gpio0-ldo {
+			pins = "GPIO0";
+			function = "ldo";
+		};
+
+		gpio1_ldo: gpio1-ldo {
+			pins = "GPIO1";
+			function = "ldo";
+		};
+	};
+
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_ldo>;
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_ldo>;
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+};

arch/arm/dts/bubblegum_96.dts

@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Device Tree Source for Bubblegum-96
+//
+// Copyright (C) 2015 Actions Semi Co., Ltd.
+// Copyright (C) 2018 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+/dts-v1/;
+#include "s900.dtsi"
+
+/ {
+	model = "Bubblegum-96";
+	compatible = "ucrobotics,bubblegum-96", "actions,s900";
+
+	aliases {
+		serial5 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial5:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};

arch/arm/dts/dragonboard410c-uboot.dtsi

@@ -6,6 +6,11 @@
  */
 
 / {
+
+	smem {
+		u-boot,dm-pre-reloc;
+	};
+
 	soc {
 		u-boot,dm-pre-reloc;
 

arch/arm/dts/dragonboard410c.dts

@@ -27,18 +27,34 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			no-map;
+		};
 	};
 
 	chosen {
 		stdout-path = "/soc/serial@78b0000";
 	};
 
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+	};
+
 	soc {
 		#address-cells = <0x1>;
 		#size-cells = <0x1>;
 		ranges = <0x0 0x0 0x0 0xffffffff>;
 		compatible = "simple-bus";
 
+		rpm_msg_ram: memory@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x60000 0x8000>;
+		};
+
 		pinctrl: qcom,tlmm@1000000 {
 			compatible = "qcom,tlmm-apq8016";
 			reg = <0x1000000 0x400000>;

arch/arm/dts/dragonboard820c-uboot.dtsi

@@ -6,6 +6,10 @@
  */
 
 / {
+	smem {
+		u-boot,dm-pre-reloc;
+	};
+
 	soc {
 		u-boot,dm-pre-reloc;
 

arch/arm/dts/dragonboard820c.dts

@@ -28,11 +28,27 @@
 		reg = <0 0x80000000 0 0xc0000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
 	};
 
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/dts/exynos4210-pinctrl-uboot.dtsi

@@ -7,8 +7,6 @@
 
 /{
 	pinctrl_0: pinctrl@11400000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "samsung,exynos4210-pinctrl";
 	};
 
@@ -21,8 +19,6 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 };

arch/arm/dts/exynos4210-universal_c210.dts

@@ -25,8 +25,6 @@
 		gpio-mosi = <&gpy3 3 0>;
 		gpio-miso = <&gpy3 0 0>;
 		spi-delay-us = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		cs@0 {
 		};
 	};

arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi

@@ -32,13 +32,9 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 	pinctrl_3: pinctrl@106E0000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 };

arch/arm/dts/exynos5.dtsi

@@ -147,8 +147,6 @@
 	dp: dp@145b0000 {
 		compatible = "samsung,exynos5-dp";
 		reg = <0x145b0000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 	xhci0: xhci@12000000 {

arch/arm/dts/exynos5250-pinctrl-uboot.dtsi

@@ -18,8 +18,6 @@
 	};
 
 	pinctrl_1: pinctrl@13400000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 	pinctrl_2: pinctrl@10d10000 {
@@ -34,8 +32,6 @@
 	};
 
 	pinctrl_3: pinctrl@03860000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 };

arch/arm/dts/exynos5250-spring.dts

@@ -31,7 +31,7 @@
 		spi2 = "/spi@12d40000";
 		spi3 = "/spi@131a0000";
 		spi4 = "/spi@131b0000";
-		mmc0 = "/mmc@12000000";
+		mmc0 = "/mmc@12200000";
 		serial0 = "/serial@12C30000";
 		console = "/serial@12C30000";
 		i2s = "/sound@3830000";

arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi

@@ -12,8 +12,6 @@
 	 * numbers are not needed in U-Boot for exynos.
 	 */
 	pinctrl@14010000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 	pinctrl@13400000 {
 		#address-cells = <1>;
@@ -26,16 +24,10 @@
 		};
 	};
 	pinctrl@13410000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 	pinctrl@14000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 	pinctrl@03860000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 
 };

arch/arm/dts/fsl-ls1012a-2g5rdb.dts

@@ -40,3 +40,7 @@
 &duart0 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};

arch/arm/dts/fsl-ls1012a-qds.dtsi

@@ -125,3 +125,7 @@
 	status = "okay";
 	phy_type = "ulpi";
 };
+
+&sata {
+	status = "okay";
+};

arch/arm/dts/fsl-ls1012a-rdb.dtsi

@@ -34,3 +34,7 @@
 &duart0 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};

arch/arm/dts/fsl-ls1012a.dtsi

@@ -134,6 +134,14 @@
 				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 		};
 
+		sata: sata@3200000 {
+			compatible = "fsl,ls1012a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 69 4>;
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
 		usb0: usb2@8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;

arch/arm/dts/imx53-kp.dts

@@ -86,6 +86,10 @@
 				MX53_PAD_PATA_DA_2__GPIO7_8 0x1e4
 				/* BOOSTER_OFF */
 				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				/* LCD BACKLIGHT */
+				MX53_PAD_GPIO_1__GPIO1_1 0x1e4
+				/* KEY1 GPIO */
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
 			>;
 		};
 

arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi1 {
+	num-cs = <2>;
+
+	flash0: n25q256a@0 {
+		compatible = "spi-flash";
+	};
+
+	flash1: n25q256a@1 {
+		compatible = "spi-flash";
+	};
+};

arch/arm/dts/imx6sx-sabreauto.dts

@@ -96,6 +96,29 @@
 	};
 };
 
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_1>;
+	status = "okay";
+	ddrsmp=<2>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+
+	flash1: n25q256a@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <1>;
+	};
+};
+
 &iomuxc {
 	imx6x-sabreauto {
 		pinctrl_i2c2_1: i2c2grp-1 {
@@ -112,6 +135,23 @@
 			>;
 		};
 
+		pinctrl_qspi1_1: qspi1grp_1 {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0  0x70a1
+				MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1  0x70a1
+				MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2  0x70a1
+				MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3  0x70a1
+				MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK     0x70a1
+				MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B   0x70a1
+				MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0  0x70a1
+				MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1  0x70a1
+				MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2  0x70a1
+				MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3  0x70a1
+				MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK     0x70a1
+				MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B   0x70a1
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1

arch/arm/dts/imx6sx-sdb-u-boot.dtsi

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi2 {
+	num-cs = <2>;
+
+	flash0: n25q256a@0 {
+		compatible = "spi-flash";
+	};
+
+	flash1: n25q256a@1 {
+		compatible = "spi-flash";
+	};
+};

arch/arm/dts/imx6sx.dtsi

@@ -40,11 +40,13 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
-		spi0 = &ecspi1;
-		spi1 = &ecspi2;
-		spi2 = &ecspi3;
-		spi3 = &ecspi4;
-		spi4 = &ecspi5;
+		spi0 = &qspi1;
+		spi1 = &qspi2;
+		spi2 = &ecspi1;
+		spi3 = &ecspi2;
+		spi4 = &ecspi3;
+		spi5 = &ecspi4;
+		spi6 = &ecspi5;
 		usbphy0 = &usbphy1;
 		usbphy1 = &usbphy2;
 	};

arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi

@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi {
+	flash0: n25q256a@0 {
+		compatible = "spi-flash";
+	};
+};

arch/arm/dts/imx6ul-14x14-evk.dts

@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+	aliases {
+		spi5 = &soft_spi;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_sd1_vmmc: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			off-on-delay = <20000>;
+			enable-active-high;
+		};
+
+		reg_can_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_gpio_dvfs: regulator-gpio {
+			compatible = "regulator-gpio";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_dvfs>;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-name = "gpio_dvfs";
+			regulator-type = "voltage";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			states = <1300000 0x1 1400000 0x0>;
+		};
+	};
+
+	soft_spi: soft-spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			registers-default = /bits/ 8 <0x57>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mag3110@0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		position = <2>;
+	};
+
+	fxls8471@1e {
+		compatible = "fsl,fxls8471";
+		reg = <0x1e>;
+		position = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 8>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+	imx6ul-evk {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
+				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
+				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+				MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x80000000
+			>;
+		};
+
+		pinctrl_dvfs: dvfsgrp {
+			fsl,pins = <
+				MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x79
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+				MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
+				MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
+			>;
+		};
+
+		pinctrl_qspi: qspigrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
+				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
+				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
+				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
+				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+			>;
+		};
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+				MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+				MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10071
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_8bit: usdhc2grp_8bit {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_8bit_100mhz: usdhc2grp_8bit_100mhz {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100b9
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170b9
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_8bit_200mhz: usdhc2grp_8bit_200mhz {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100f9
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170f9
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+			>;
+		};
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+			>;
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-nor,ddr-quad-read-dummy = <6>;
+		reg = <0>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};

arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi

@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+&qspi {
+	flash0: n25q256a@0 {
+		compatible = "spi-flash";
+	};
+};

arch/arm/dts/imx6ul-9x9-evk.dts

@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 9x9 EVK Board";
+	compatible = "fsl,imx6ul-9x9-evk", "fsl,imx6ul";
+
+	aliases {
+		spi5 = &soft_spi;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_can_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_gpio_dvfs: regulator-gpio {
+			compatible = "regulator-gpio";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_dvfs>;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-name = "gpio_dvfs";
+			regulator-type = "voltage";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			states = <1300000 0x1 1400000 0x0>;
+		};
+
+		reg_sd1_vmmc: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			off-on-delay = <20000>;
+			enable-active-high;
+		};
+	};
+
+	soft_spi: soft-spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			registers-default = /bits/ 8 <0x57>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+					regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	mag3110@0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		position = <2>;
+	};
+
+	fxls8471@1e {
+		compatible = "fsl,fxls8471";
+		reg = <0x1e>;
+		position = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 8>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+	imx6ul-evk {
+
+		pinctrl_dvfs: dvfsgrp {
+			fsl,pins = <
+				MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x79
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+				MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x80000000
+			>;
+		};
+
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
+				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
+				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+				MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
+				MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
+			>;
+		};
+
+		pinctrl_qspi: qspigrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
+				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
+				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
+				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
+				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+			>;
+		};
+
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+				MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+				MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+			>;
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-nor,ddr-quad-read-dummy = <6>;
+		reg = <0>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};