Stephan Gerhold 94e57ba201 clk: qcom: Use setbits_le32() for qcom_gate_clk_en() ...

The other clock enable functions in clock-qcom.c use setbits_le32() to
read/modify/write the enable registers. Use the same for qcom_gate_clk_en()
to simplify the code a bit.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250424-apq8016-clock-fixes2-v2-3-fcc371c9e45f@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

2025-06-02 18:20:15 +02:00

..

adc

adc: rockchip-saradc: Add support for RK3528

2025-04-23 22:12:04 +08:00

ata

Merge patch series "MIPS: Boston: Various enhancements"

2025-04-22 15:13:21 -06:00

axi

…

bios_emulator

…

block

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

bootcount

Kconfig: Move CONFIG_BOOTCOUNT_ALTBOOTCMD to Kconfig

2025-02-14 10:19:24 -06:00

bus

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

button

button: make button_get_by_label() case insensitive

2025-04-11 15:28:14 +02:00

cache

…

clk

clk: qcom: Use setbits_le32() for qcom_gate_clk_en()

2025-06-02 18:20:15 +02:00

core

Merge patch series "Switch to using $(PHASE_) in Makefiles"

2025-04-11 12:16:49 -06:00

cpu

cpu: imx95: add i.MX95 support

2025-05-03 16:55:32 -03:00

crypto

caam: Fix CAAM error on startup

2025-05-22 09:01:51 -03:00

ddr

ddr: altera: iossm: Enhance debug information for ECC errors

2025-04-22 11:47:41 +08:00

demo

…

dfu

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

dma

arm: mach-k3: j721e: Split out J7200 SoC support from J721e

2025-04-05 18:28:02 -06:00

extcon

…

fastboot

fastboot: lift restrictions on !NET_LWIP for USB

2025-04-10 09:59:37 +02:00

firmware

firmware: ti_sci: Add Initialization of dev_info head node

2025-05-05 14:18:59 -06:00

fpga

arm64: versal2: Add PL bit stream load support

2025-04-16 13:44:44 +02:00

fuzz

…

fwu-mdata

…

gpio

gpio: tegra_gpio: implement rfree operation

2025-05-08 08:30:53 +03:00

hwspinlock

…

i2c

i2c: mediatek: remove duplicate entry in mt_i2c_regs_v1[]

2025-04-22 13:04:22 +02:00

input

input: add support for CPCAP power button

2025-04-12 09:44:02 +03:00

iommu

…

led

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

mailbox

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

memory

memory: ti-gpmc: Alloc per driver private struct

2025-03-13 14:23:05 -06:00

mfd

…

misc

rockchip: io-domain: Enable by default for all supported SoCs

2025-05-06 16:12:06 +08:00

mmc

mmc: cv1800b: Fix build without MMC_SUPPORTS_TUNING

2025-05-20 23:11:52 +08:00

mtd

mtd: spi-nor: Send write disable cmd after every write enable

2025-05-06 13:13:36 -06:00

mux

Merge patch series "Switch to using $(PHASE_) in Makefiles"

2025-04-11 12:16:49 -06:00

net

net: fsl_enetc: fix imdio register calculation

2025-05-12 18:43:19 -03:00

nvme

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

pch

…

pci

Merge patch series "Add PCIe support for TI AM64 SoC"

2025-04-24 10:46:17 -06:00

pci_endpoint

…

phy

phy: sun4i-usb: Determine USB OTG detection pin from devicetree

2025-04-28 12:45:44 -06:00

pinctrl

pinctrl: rockchip: constify rockchip_pin_ctrl for RV1108

2025-05-06 15:59:43 +08:00

power

power: qcom_vbus_regulator: add and fix support for pmic variants

2025-06-02 18:20:00 +02:00

pwm

pwm: mediatek: add pwm support for MediaTek MT7987 SoC

2025-03-30 09:14:44 -06:00

qe

…

ram

ram: thead: Add initial DDR controller support for TH1520

2025-05-21 16:49:52 +08:00

reboot-mode

…

remoteproc

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

reset

firmware: scmi: use scmi_proto_driver_get() function to get SCMI protocol driver

2025-05-03 16:55:32 -03:00

rng

rng: rockchip: Add support for rkrng variant

2025-04-23 22:12:04 +08:00

rtc

rtc: emul_rtc: Make emul_rtc_probe() static

2025-02-10 10:29:10 -06:00

scsi

drivers: scsi: Add 'erase' support

2025-04-10 20:55:53 -06:00

serial

serial: Setup default base and frequency for Versal platforms

2025-04-16 13:42:06 +02:00

sm

…

smem

…

soc

soc: Add information to identify the J742S2 SoC family

2025-04-03 11:37:46 -06:00

sound

…

spi

spi: fspi: dev_dbg() call assumes fdt_addr_t always a long long

2025-05-12 18:42:53 -03:00

spmi

spmi: msm: correctly handle multiple mapping entries

2025-04-10 15:43:10 +02:00

sysinfo

sysinfo: Add driver for IOT2050 boards

2025-02-28 08:41:54 -06:00

sysreset

sysreset: implement MAX9807 sysreset functions

2025-05-08 08:30:53 +03:00

tee

…

thermal

…

timer

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00

tpm

tpm: cr50: Support opening the TPM multiple times

2025-04-14 22:59:01 +03:00

ufs

ufs: amd-versal2: Use raw read/write for SLCR/CACHE registers

2025-04-16 13:42:06 +02:00

usb

usb: ulpi: Clean up how we enable support

2025-05-25 15:44:13 +02:00

video

video: backlight: add Skyworks/Analogictech AAT2870 led controller driver

2025-05-08 08:30:53 +03:00

virtio

…

w1

…

w1-eeprom

…

watchdog

watchdog: sunxi: add A523 support

2025-04-28 12:45:44 -06:00

xen

…

Kconfig

…

Makefile

Kbuild: Always use $(PHASE_)

2025-04-11 12:16:44 -06:00