mirror of
https://source.denx.de/u-boot/u-boot.git
synced 2026-06-13 15:03:58 +03:00
b0f39c085d
doc/device-tree-bindings/leds/leds-bcm6328.txt can be found at dts/upstream/Bindings/leds/leds-bcm6328.yaml. doc/device-tree-bindings/leds/leds-bcm6358.txt can be found at dts/upstream/Bindings/leds/leds-bcm6358.txt. doc/device-tree-bindings/leds/leds-gpio.txt can be found at dts/upstream/Bindings/leds/leds-gpio.yaml. doc/device-tree-bindings/leds/leds-lp5562.txt can be found at dts/upstream/Bindings/leds/leds-lp55xx.yaml. Only two LED dt-bindings are left in U-Boot: leds-bcm6858.txt and leds-pwm.txt. The former is partially supported by dts/upstream/Bindings/leds/leds-bcm63138.yaml but is lacking all optional properties we have listed in "downstream" dt-binding in U-Boot. However, there doesn't seem to exist any user of that compatible. The latter is partially supported by dts/upstream/Bindings/leds/leds-pwm.yaml but is missing the u-boot,default-brightness property, which is used by arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi at the moment. The default-brightness property is probably not what we want here as it defaults to max-brightness if missing. I'm assuming we want a different value for U-Boot (127) and the kernel (255 via max-brightness as a default), which would prevent us from upstreaming this property, which doesn't change the status quo, so let it be for now. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This patch series adds support for ZFS listing and load to u-boot. To Enable zfs ls and load commands, modify the board specific config file with #define CONFIG_CMD_ZFS Steps to test: 1. After applying the patch, zfs specific commands can be seen in the boot loader prompt using UBOOT #help zfsload- load binary file from a ZFS file system zfsls - list files in a directory (default /) 2. To list the files in zfs pool, device or partition, execute zfsls <interface> <dev[:part]> [POOL/@/dir/file] For example: UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/ 3. To read and load a file from an ZFS formatted partition to RAM, execute zfsload <interface> <dev[:part]> [addr] [filename] [bytes] For example: UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage References : -- ZFS GRUB sources from Solaris GRUB-0.97 -- GRUB Bazaar repository Jorgen Lundman <lundman at lundman.net> 2012.