Just like TF-A and OP-TEE, the documentation states a custom path for DM
can be provided at build time by setting TI_DM. This should then set
ti-dm-path which updates ti-dm node filenames in binman.
Two issues prevent this from functioning for most K3 boards. One is when
then DM firmware name is inside a blob-ext node instead of a ti-dm node.
The second is when the filename in the ti-dm node is a pointer to a
blob-ext node. In this case even though the filename is updated, the
filename in the blob-ext is not, so build can fail if the default
file in the blob-ext cannot be found, even if the updated ti-dm file
does exist.
Fix both of these for all K3 by removing any indirect ti-dm nodes and
making sure all DM nodes are labeled with "ti-dm".
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Rather than hard coding the maximum memory size, lets just define the
CFG_MAX_MEM_SIZE so get_effective_memsize() will return the correct
value without modification.
Signed-off-by: Bryan Brattlof <bb@ti.com>
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
The PMIC is not yet supported in mainline, but the work is ongoing.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Enable UHS modes for SD by enabling configs for voltage regulator
drivers, IO voltage switching, and configs to support UHS modes.
The am64x SoC has an internal LDO which does voltage switching,
but the MMC_IO_VOLTAGE config is still required to be able to
switch voltage for SD.
While we are here, am64x HS400 mode has been descoped as per
datasheet [0] even though we still initialize to HS200, clean
this up by switching to MMC_HS200_SUPPORT config options.
[0] https://www.ti.com/lit/gpn/am6442
Signed-off-by: Judith Mendez <jm@ti.com>
Like other TI platforms, let's enable the ESM. This allows the ESM to be
programmed during boot, and the PMIC associated with the ESM output,
enabling blocks like the RTI watchdogs to actually cause the system to
reset.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Initialize the ESM & PMIC ESM. This allows things like
the watchdog to reset the board when tripped.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Add the PMIC ESM node which is responsible for triggering the PMIC
reset.
Suggested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Add the PMIC ESM node which is responsible for triggering the PMIC
reset.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Enable basic EFI debug features, switch over to stdboot, enable GPIO,
LED and PMIC used on this platform. And enable UHS mode support for SD
cards in U-Boot.
Unlike other BeagleBoard products, BeagleY-AI does not have
alternative onboard non-volatile memories, so capsule support does not
make sense.
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Drop SPI, EMMC, GPIO expanders that come with EVM etc.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Drop using j722s_evm defconfig since the evm has numerous features that
we do not need on BeagleY-AI platform. As new peripherals get added to
EVM support, we end up having to cleanup after in beagle configurations.
Instead of doing that, just split up BeagleY's configuration
independently out.
NOTE: no cleanup has been done to this configuration to allow for
reproducibility. The cleanups are done in follow on patches
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Just enable dfu options, We have MMC and RAM as options here.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Most of the users of BeagleY-AI are headless OR do not use serial port.
In such cases, it is very useful for the device to provide some level of
indication to know what state their board is at.
Unfortunately, with a single LED (ignoring the :heartbeat), the
options are limited. This is a precursor patch to actually enabling
the LED options that will use the same in the follow on patches.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
We just have a single MMC on BeagleY-AI. So drop all other boot options,
In the meanwhile, we also will use efiboot and standard boot methods
consistent with other K3 Beagle products.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
main_gpio1 controls the voltage for the SDcard from 3.3v to 1.8v.
This is required for proper operation of SDcard through various boot
stages.
Fixes the following seen in the boot log:
failed to set vqmmc-voltage to 3.3V
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
just use beagley_ai as pattern match for the files and folders involved.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Simon Glass <sjg@chromium.org> says:
This series includes some precursor patches needed for forthcoming expo
enhancements.
- truetype support for multiple lines
- make white-on-black a runtime option
- support drawing a rectangle
When the cursor position changes, kerning should not be used for the
next character, since it can make the first displayed character shuffle
left or right a bit.
Clear the kern character when setting the position.
Signed-off-by: Simon Glass <sjg@chromium.org>
Provide a way to draw an unfilled box of a certain width. This is useful
for grouping menu items together.
Add a comment showing how to see the copy-framebuffer, for testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
When using expo we want to be able to control the information on the
display and avoid other messages (such as USB scanning) appearing.
Add a 'quiet' flag for the console, to help with this.
The test is a little messy since stdio is still using the original
vidconsole create on start-up. So take care to use the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
We want to check the display contents in expo tests, so move the two
needed functions to a new header file.
Rename them to have a video_ prefix.
Signed-off-by: Simon Glass <sjg@chromium.org>
When writing multiple lines of text we need to be able to control which
text goes on each line. Add a new vidconsole_put_stringn() function to
help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Expo needs to be able to word-wrap lines so that they are displayed as
the user expects. Add a limit on the width of each line and support this
in the measurement algorithm.
Add a log category to truetype while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is useful to be able to embed newline characters in the string and
have the text measured into multiple lines. Add support for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the vidconsole API so that measure() can measure multiple lines
of text. This will make it easier to implement multi-line fields in
expo.
Tidy up the function comments while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The CONFIG_WHITE_ON_BLACK setting is hard-coded at build-time. It is
useful to be able to control this when showing menus.
Create a property to hold this information, using the CONFIG as the
initial value.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a console_printf_select_stderr() function so that it is not
necessary for the caller to process the format string.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Caleb Connolly <caleb.connolly@linaro.org> says:
Introduce a new event to signal that the live tree has been built,
allowing boards to perform fixups on the tree before devices are bound.
Crucially this allows for devices to be enabled or disabled, but also
allows for properties that are parsed during the bind stage to be
modified (such as dr_mode for dwc3).
With this in place, mach-snapdragon is switched over to use the event
and some hacky U-Boot specific DT overrides (which had to be undone
prior to booting an image) are removed in favour of fixing up the
livetree (which is not passed on to further boot stages).
Finally, some minor fixes are made for the QCM2290 RB1 board, the sdcard
is enabled and it now uses USB host mode in U-Boot like it's bigger
sibling the RB2.
Link: https://lore.kernel.org/r/20250411-livetree-fixup-v2-0-1236823377bb@linaro.org
The RB1 and RB2 have a single USB controller which is manually muxed
between a type-c port and an internal USB hub via a DIP switch. OTG is
supported in Linux, but the DWC3 driver in U-Boot can only handle a
single mode, and defaults to peripheral mode.
We did hack around this on the RB2, but the RB1 got left out.
Now that we can fix up the live tree before devices are bound, drop the
DTS hacks and do the fixup at runtime instead.
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The debug log here had the logic completely backwards, even though the
code is actually correct. Remove it since it's extraneous anyway.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
This will now apply fixups prior to devices being bound, which makes it
possible to enable/disable devices and adjust more properties that might
be read before devices probe.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
OF_LIVE offers a variety of benefits, one of them being that the live
tree can be modified without caring about the underlying FDT. This is
particularly valuable for working around U-Boot limitations like lacking
USB superspeed support on Qualcomm platforms, no runtime OTG, or
peripherals like the sdcard being broken (and displaying potentially
worrying error messages).
Add an event to signal when the live tree has been built so that we can
apply fixups to it directly before devices are bound.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Some drivers call video_set_flush_dcache() to indicate that they want to
have the dcache flushed for the frame buffer. These drivers benefit from
our new video damage control, because we can reduce the amount of memory
that gets flushed significantly.
This patch enables video damage control for all device drivers that call
video_set_flush_dcache() to make sure they benefit from it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
[Alper: Add to VIDEO_TIDSS, imply instead of select]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The dcache flushing code path was conditional on ARM && !DCACHE config
options. However, dcaches exist on other platforms as well and may need
clearing if their driver requires it.
Simplify the compile logic and always enable the dcache flush logic in
the video core. That way, drivers can always rely on it to call the arch
specific callbacks.
This will increase code size for non-ARM platforms with CONFIG_VIDEO=y
slightly.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-13-alpernebiyasak@gmail.com/
Added workaround for CONFIG_SYS_CACHELINE_SIZE for ibex-ast2700:
Signed-off-by: Simon Glass <sjg@chromium.org>
CONFIG_VIDEO_COPY implemented a range-based copying mechanism: If we
print a single character, it will always copy the full range of bytes
from the top left corner of the character to the lower right onto the
uncached frame buffer. This includes pretty much the full line contents
of the printed character.
Since we now have proper damage tracking, let's make use of that to reduce
the amount of data we need to copy. With this patch applied, we will only
copy the tiny rectangle surrounding characters when we print them,
speeding up the video console.
After this, changes to the main frame buffer are not immediately copied
to the copy frame buffer, but postponed until the next video device
sync. So issue an explicit sync before inspecting the copy frame buffer
contents for the video tests.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
[Alper: Rebase for fontdata->height/w, fill_part(), fix memmove(dev),
drop from defconfig, use damage.xstart/yend, use IS_ENABLED(),
call video_sync() before copy_fb check, update video_copy test]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/u-boot/20230821135111.3558478-12-alpernebiyasak@gmail.com/
