The symbol SPL_SYS_MALLOC_F defaults to y when visible and
TPL_SYS_MALLOC_F defaults to y when visible and SPL_SYS_MALLOC_F is
enabled. Remove the places from Kconfig files that had unneccsary
"default y" for these options.
Signed-off-by: Tom Rini <trini@konsulko.com>
AM62d currently shares resource management configuration files with
AM62a. However, AM62a resource management needs to be modified for DMA
resource sharing scheme for CPSW3G Ethernet functionality to support
multi-core traffic handling.
Add separate AM62d-specific resource management configuration files to
decouple from the AM62a changes and maintain proper resource allocation
for AM62d.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
This is the first wave of MediaTek changes for this merge window. We
also expect to be sending another decent-sized pull request later for
the backlog of patches that are currently waiting on dependencies or
need little more time for review.
* Fixes for cargo-culted issues in mach-mediatek init.c files.
* Some consistency cleanups of recently added Genio boards (510/700/1200).
* Some pinctrl improvements to support newer MediaTek SOCs (mt8189 compatible).
* New devicetree and config for Genio 520/720 EVK boards (can boot to eMMC or SD).
* New CPU-specific functions to read vendor-specific CPU info at runtime.
Define CONFIG_SYS_SOC in the mach-sc5xx Kconfig. Follow the standard
U-Boot include path convention by moving the SC5xx SoC headers from
arch/arm/include/asm/arch-adi/sc5xx/ to the conventional
arch/arm/include/asm/arch-sc5xx/ location. Update includes from
<asm/arch-adi/sc5xx/*.h> to <asm/arch/*.h> across mach-sc5xx and board
files.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
This symbol should not be enabled by the user directly but rather
selected when implemented in a given platform. This converts all of the
current users of this feature and hides the symbol.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add U-Boot-specific device tree overrides for the Genio 520 and 720 EVK
boards. These are needed to enable SD card support in U-Boot due to
current driver limitations. It is expected that these files will remain
after eventually converting these to CONFIG_OF_UPSTREAM, so we use
separate .u-boot.dtsi files for this.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260316-mtk-ext-mmc-boot-v1-2-1aae51a44705@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8518.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-17-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the implementation of the gd->ram_top limit for mt8195.
The intention of the comment about MMC/DMA is correct, but the
implementation was wrong. gd->mon_len is set to the code size of U-Boot,
so trying to set it to limit gd->ram_top does not make sense.
Instead, there is already a get_effective_memsize() weak function that
we can override to implement the required limit on the usable memory
size. This is used to set gd->ram_top in setup_dest_addr().
The comment about the extra SZ_1M needing to be reserved is not correct
as U-Boot already takes care of this (with the actual size of U-Boot) in
the various board_f functions, so it is removed.
This fixes DMA not working on MMC on mt8195.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-12-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8195.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-11-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the implementation of the gd->ram_top limit for mt8188.
The intention of the comment about MMC/DMA is correct, but the
implementation was wrong. gd->mon_len is set to the code size of U-Boot,
so trying to set it to limit gd->ram_top does not make sense.
Instead, there is already a get_effective_memsize() weak function that
we can override to implement the required limit on the usable memory
size. This is used to set gd->ram_top in setup_dest_addr().
The comment about the extra SZ_1M needing to be reserved is not correct
as U-Boot already takes care of this (with the actual size of U-Boot) in
the various board_f functions, so it is removed.
This fixes DMA not working on MMC on mt8188.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-8-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8188.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-7-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8183.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-4-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Disable incorrectly enabled SCIF1 in Renesas R-Car X5H R8A78000 SoC DT.
The SCIF1 should be enabled on board DT level in case it is needed, but
should be disabled in SoC DT by default. This had no adverse effect on
the currently upstream platforms, because those managed to probe only
the HSCIF0 device and SCIF1 was ignored.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.
To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.
Signed-off-by: Tom Rini <trini@konsulko.com>
It is not functionally possible to use the code enabled by
PARTITION_TYPE_GUID without having EFI_PARTITION be enabled as well. Not
all users of the former had ensured that the latter was enabled however,
so audit all current users and then as appropriate select or imply
EFI_PARTITION as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Allow CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX95.
Remove the now obsolete device tree files:
- imx95-toradex-smarc-dev.dts
- imx95-toradex-smarc.dtsi
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing
PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it
to the existing board-code "phycore_imx93", and rename that board to
"phycore_imx91_93" to reflect the dual SoCs support. While at it, also
rename and change common files accordingly. This way i.MX91 and i.MX93
SoC variants of the phyCORE SoM share most of the code and documentation
without duplication, while maintaining own device-tree and defconfigs
for each CPU variant.
Supported features:
- 1GB LPDDR4 RAM
- Debug UART
- EEPROM
- eMMC
- Ethernet
- SD-card
- USB
Product page SoM:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
As exposed by "make randconfig", we have an issue with the dependencies
for REGMAP (and xPL variants). As this is a library function, it should
always be selected and not depended on by other functionality. This is
largely done correctly today, so just correct the few outliers.
Acked-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Introduce new mode of relocation which relocates only data, not code.
This is mainly meant to relocate data to read-write portion of the RAM,
while the code remains in read-only portion of the RAM from which it is
allowed to execute. This split configuration is present on various secure
cores.
The result of the relocation is U-Boot running at its original address,
data relocated to the end of DRAM, but with added read-write area offset.
The U-Boot binary area is not reserved from the end of the DRAM in this
relocation mode, because U-Boot itself is not relocated.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The code in the __XSCALE__ section is unused, since there is no more
XScale support in U-Boot. Remove the stale code. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The ARM32 has PLx Privilege Levels instead of Exception Levels present
on ARM64. Introduce current_pl() function which reports the current PL
on ARM32.
Introduce current_el() for ARM32 as well and current_pl() for ARM64
which each call the other matching function. This is mainly mean to
allow code like this to compile and retain compile time code coverage:
if (IS_ENABLED(CONFIG_ARM64) && current_el() != 3) { ... }
if (!IS_ENABLED(CONFIG_ARM64) && current_pl() != 0) { ... }
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The msg.c file uses EIO macro defined in errno.h , include errno.h
to avoid build failure:
"
arch/arm/mach-bcm283x/msg.c: In function 'bcm2835_power_on_module':
arch/arm/mach-bcm283x/msg.c:73:25: error: 'EIO' undeclared (first use in this function)
73 | return -EIO;
| ^~~
"
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
k3_falcon_fdt_fixup is used to perform fdt fixups at runtime in falcon
mode such as adding bootargs. Currently the function is only accessible
to the R5 SPL but could be useful for A53 SPL based falcon mode setups
as well.
Therefore this patch moves the function from r5/common.c to common.c.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
The reserved memory sizes for ATF and OPTEE were hard-coded for K3
devices, this patch replaces them with a Kconfig option allowing for
easier modifications.
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
