With commit c85b8071e7 ("virtio: blk: support block sizes exceeding 512
bytes") logic was added to detect the VIRTIO_BLK_F_BLK_SIZE capability and
to copy the block size reported by QEMU to the block device descriptor.
The logical block size can be set when invoking QEMU:
-drive if=none,file=4096.img,format=raw,id=vda \
-device virtio-blk-device,drive=vda,physical_block_size=4096,logical_block_size=4096
In U-Boot the logical block size is shown by command `virtio info`:
=> virtio info
Device 0: QEMU VirtIO Block Device
Type: Hard Disk
Capacity: 1024.0 MB = 1.0 GB (262144 x 4096)
There where two flaws which together hid that the logic was incorrect:
* VIRTIO_BLK_F_BLK_SIZE was missing in the driver capabilities and the bit
was filtered out.
* The result of the call to virtio_has_feature() was negated.
The problem became apparent when using ARM FVP as emulator which does not set
VIRTIO_BLK_F_BLK_SIZE.
Fixes: c85b8071e7 ("virtio: blk: support block sizes exceeding 512 bytes")
Reported-by: Debbie Horsfall <debbie.horsfall@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The pointer resp is declared but never assigned a value but is then
dereferenced. Fix this by assigning the pointer to the message buffer.
This issue was found by Smatch.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
In ti_sci_get_response the check for message sequence will return ret
on a fail but ret will be 0 at that point. Instead return -EINVAL.
Also change dev_dbg call to dev_err to be consistent with other error
detection code in the same function.
This issue was found by Smatch.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
temp is assigned the pointer returned by malloc which is used without a
NULL check and then never freed. Add a NULL check and ensure temp is
freed on all return paths.
This issue was found by Smatch.
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
The cv1800b_clk_setfield function returns void, but was doing "return
writel(...);" and while seemingly having a void function return a void
function is not a warning, when readl is a macro this problem is shown.
Correct the code to instead simply call writel.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Yao Zi <ziyao@disroot.org>
The WDT_DAVINCI driver is not safe to compile on 64bit platforms such as
allyesconfig on a 64bit host. Tighten the dependencies here to the
platforms which could use it today.
Signed-off-by: Tom Rini <trini@konsulko.com>
A few watchdog drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
TPM changes:
Make all drive names defined with U_BOOT_DRIVER unique
TEE changes:
Rework things such that sandbox will also traverse the optee directory
when SANDBOX_TEE is enabled, but only build one of the optee-specific
files when OPTEE is enabled.
EFI changes:
Up to now we were relying on the file extension to accept and load
an image over HTTP. We expected images to be either .iso or .img.
By wiring up internal existing functions we can try to mount any
file extension and reject it only if mounting fails.
part_driver_lookup_type
All instances of the U_BOOT_DRIVER must use a unique name or they will
lead to link time failures due to name space conflicts when both are
present. In this case the driver was reusing the tpm_tis_i2c name.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The intention of how this Makefile was written was to allow for sandbox
to build and test drivers still while otherwise requiring OPTEE to be
enabled. This however didn't work quite right in practice as sandbox
could enable some drivers which would then fail to link. Rework things
such that sandbox will also traverse the optee directory when
SANDBOX_TEE is enabled, but only build one of the optee-specific files
when OPTEE is enabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Correct the memory and IO mbus windows size increments in mvebu_pcie_bind.
Currently, pcie1 controller resource_size(&mem) and resource_size(&io)
checks result in a failure. This is because mem.end and io.end must be
incremented at the end of pcie0 windows assignment.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
This driver cannot link without access to functions that are defined in
files that are only build on some platforms. Express those requirements
in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
In octeontx_mmc_io_drive_setup drive and slew are tested for being less
than 0 but they are declared as uint fields so this test must always
fail. Just remove the test.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
The check for no response expected in octeontx_mmc_send_cmd needs parens
adding for proper interpretation.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Smatch reported an issue with a test that was always true in that an
unsigned variable will always be >= to zero. This led to a closer look
at the code which showed that some static functions returned values that
were always discarded so make those functions return void. Also make
the passing of block counts in those functions always use lbaint_t.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
The MCHP_PIT64B_TIMER driver is not safe to compile on 64bit platforms
such as allyesconfig on a 64bit host. Tighten the dependencies here to
the platforms which use it today.
Acked-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver has never been enabled and currently has build problems
related in part to incorrect out_le32 calls. Remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This series adds significant and valuable work by Mikhail Kshevetskiy to
align spi-mem with Linux 6.16. It also includes contributions to the mtd
performance patches, a work started by Miquel Raynal and improved by
Mikhail Kshevetskiy. Additionally, two patches tighten dependencies on
the Atmel driver.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/27873
During entropy evaluation, if the generated samples fail any statistical test,
then, all of the bits will be discarded, and a second set of samples will be
generated and tested.
Double the ent_delay to give more chance to pass before performing retry.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The function cv1800b_set_tap_delay is only called by
cv1800b_execute_tuning. The latter is where we currently have the #if
guard around MMC_SUPPORTS_TUNING, and so with the option disabled we
have an unused function warning. Move the guard to cover both functions.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In order to enable and build with SPL_REGULATOR_PWM we need to have both
SPL_DM_REGULATOR and SPL_DM_PWM enabled. Build-wise, we can have SPL
have PWM regulator support without enabling it in U-Boot itself so drop
that dependency.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
When xPL_MMC_WRITE is set but also xPL_MMC_TINY is set, the function
sd_read_ssr may be unused. Guard it appropriately.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert device tree property parsing to use dev_read_u32(), which
handles endianness and simplifies the code.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
Misc update on firmware scmi:
- Typo fix
- Use io helpers
- Use PAGE_SIZE for arm64
- Add IN_USE error code
- Add more error info
- Support scmi max rx timeout in mailbox
- Add myself as scmi maintainer, AKASHI contributed most code, but
seems he is not invovled in the developement anymore, I volunteer to
help here.
Some items on list that I am thinking to add:
- align with linux kernel to use cpu_to_le32 and le32_to_cpu, but have not find
a good way to use the helpers.
- Add SCMI version negotiation as Linux Kernel
Link: https://lore.kernel.org/r/20250927-scmi-v1-0-5e9354fb3bff@nxp.com
Use dev_dbg to dump device name, dev_dbg also a encapsulation call
to log() and print(). So it is ok to use dev_dbg.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Per devicetree bindings:
arm,max-rx-timeout-ms indicates an optional time value, expressed in
milliseconds, representing the transport maximum timeout value for the
receive channel. The value should be a non-zero value if set.
Support this property if platform set it to a non-default value. This
property is a per SCMI property, so all channels share same value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
In SCMI spec 3.2, there is an update:
Add IN_USE error code for usage with Pin control protocol
So add the error decoding for IN_USE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
"Buffer too small" is too vague, dump more info to make it easier to
debug issues.
Change dev_dbg to dev_err when buffer is too small.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
It is not good practice to directly use "hdr->x" to read/write the hdr,
because the SCMI buffer may not mapped as normal memory. Following Linux
Kernel, using ioread32/iowrite32/memcpy_[from,to]io for smt header read,
write.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The script based firmware loader does not use anything from the
fs_loader implementation. Separate it into its own library source
file and convert the mediatek PHY to use this separate code. This
should reduce the amount of code that is pulled in alongside the
firmware loader, as the FS loader is no longer included.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The way that the NAND driver under DM_NAND_ATMEL is probed is by the
dummy memory driver controlled by ATMEL_EBI. Rather than require that
for NAND to work both be enabled, make NAND select ATMEL_EBI and do not
prompt for ATMEL_EBI as it only triggers the probe for NAND.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
A large number of mtd drivers cannot build without access to some
platform specific header files. Express those requirements in Kconfig as
well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
UBI updates for 2025.10
- ubi fixes found by Andrew with Smatch
- mtd: ubi: Remove test that always fails
- fs: ubifs: Ensure buf is freed before return
- fs: ubifs: Need to check return for being an error pointer
-fs: ubifs: Fix and rework error handling in ubifs_finddir
- fix: limit copy size in ubispl found by Benedikt
- extend support for LED activity (use the LED activity also on ubi reads)
from Yegor
The variables 'offset_matrix' and 'csc_matrix' will be used
uninitialised if video->is_rgb is false. Correct the logic so the
attempt to use uninitialised variables is not made. Also remove the use
of these variables as they seem to serve no useful purpose just being
aliases for arrays.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Link: https://lore.kernel.org/r/20251001-video_zynqmp-v1-1-34f1e59b9c34@linaro.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add 10GBE high-speed Mac support, it supports 10G, 5G, 2.5G and 1G speeds.
10GBE high speed Mac is an extension of the current 1G Mac in versal,
inheriting all its current features.
MMI 10GBE ip has two internal PCS's.
1)10GBASER PCS is used for higher speeds 10G and 5G.
2)1000BASEX PCS is used for slower speeds 1G and 2.5G.
Both PCS's speed and rate configuration is done with same
usx registers. ENABLE_HS_MAC bit in NCR is the toggle switch
between the PCS's.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20250828045807.426542-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Both the ds24xxx and ds2502 have a family_supported array which is local
to the driver but was not marked as static. Mark this as static as both
best practice and to allow both to be built in "allyesconfig" for
example.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
