Recent versions of this module call time.perf_counter() so add a patch
for this also.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
This merges a set of patches from myself and Simon Glass to resolve
various problems that the current version of pylint will report with our
codebase. After the problems are fixed, we update to the now current
version which is 3.3.4.
Memory region used by remote cores was set to non-cached region but
commit 7c9c6e1925 ("arm: mach-k3: Merge initial memory maps") makes
all memory region as cached, unified across K3 devices.
This causes inconsistency while booting remote cores on devices, due to
cache incoherency between remote core and boot code.
So to make this operation coherent, cache the address and len while
loading ELF program headers to memory and flush that region in the next
cycle of load.
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Defining CONFIG_MT8512 is unnecessary as now board for mediatek
target can be changed in config.
Use CONFIG_TARGET_MT8512 to replace CONFIG_MT8512.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Not all MediaTek platforms needs u-boot-mtk.bin.
This patch will let u-boot generates u-boot-mtk.bin only if
CONFIG_MTK_BROM_HEADER_INFO is not empty.
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Use preload_check_sign to authenticate the generated image when testing the
preload signature in testPreLoad().
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
pre-load related config options are enabled to have support of it in host
tools.
'CONFIG_FIT_SIGNATURE=y' is being automatically removed since it is
selected by CONFIG_IMAGE_PRE_LOAD_SIG.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
preload_check_sign is added so that it can be used to authenticate images
signed with the pre-load signature supported by binman and U-Boot.
It could also be used to test the signature in binman tests signing
images with the pre-load.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Add an empty inline declaration when compiling tools for a host where
unmap_sysmem() is not defined.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
rsa_verify_openssl() is used in lib/rsa/rsa-verify.c to authenticate data
when building host tools.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
This newer pylint produces errors about variables possibly being used
before being set. Adjust the code to pass these checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Tom Rini <trini@konsulko.com>
With a newer pylint, we get a warning that 'br' could be used before
assignment. Fix this by declaring br first as an empty bytearray.
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
With a newer pylint we get a warning about how offset could be used
before assigned. This is because when the underlying filesystem wasn't
one that is supported we would have runtime test failures. Address this
by raise'ing an Exception if fs is not supported.
Signed-off-by: Tom Rini <trini@konsulko.com>
With a newer pylint version we get a warning about how mounted_test_fn
could be used before assignment. Evaluating the code, this can't happen
because we check for "not have_writable_fs_partition" and return before
moving to the part of the tests which use mounted_test_fn. However, we
should instead have this written so that we only try this part of the
test if have_writable_fs_partition is set, and this also fixes the
warning. As part of this we also move test_f and mounted_test_fn to the
section of code that already only does this if
have_writable_fs_partition is set.
Signed-off-by: Tom Rini <trini@konsulko.com>
When running a newer version of pylint it will complain that page_size
may be used before being assignment. Looking deeper what is going on is
that we could run in to the case where the regex we run for any of the
flash information fails but since we don't have a result, we don't check
it either. In the case of the rest of the numerical values we then have
some assignment (multiplying by some value) and so pylint doesn't
complain. Rework things to assert that each regex has a result and so
failure will stop the test and we won't have any use before assignment.
Signed-off-by: Tom Rini <trini@konsulko.com>
As AM57x uses overlays for display and camera interfaces, add support to
load DT overlay files to MMC boot.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
TI AM57x boards use a custom (though family common to TI boards) mechanism
for booting Linux. Add support to enable custom MMC boot as a default
option along with the distroboot approach.
Also, add supporting mmc boot environment variables which shall be used for
custom MMC boot
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Kernel commit 837833a724 ("environment: ti: Add get_fit_config command
to get FIT config string") introduced "get_fit_config" in ti_armv7_common.h
to mangle the fdtfile name when used to select a config node from the OE
made FIT image. However, the ti_armv7_common.h is common for both K3 and
AM57xx platforms. AM57xx platforms' fdtfile name does not have '/' and
"conf-" prefix so the setexpr command fails and boot hangs.
Override the get_fit_config in AM57x specific config header to get the
correct FIT config name.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Increase the maximum Image size from 23 MB to 26 MB by moving the
initramfs start address up. This gives us a bigger ranger to
provide kernel images which are not stripped down too much.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Enable ENV_IS_IN_SPI_FLASH to read the environment from the SPI
flash when booting from it. The oftree, kernel and ramdisk sizes
are located in this environment and therefore required to boot
an initramfs.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Enable ENV_IS_IN_SPI_FLASH to read the environment from the SPI
flash when booting from it. The oftree, kernel and ramdisk sizes
are located in this environment and therefore required to boot
an initramfs.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
The USB0 instance of USB on AM62 SoC when configured to operate in the
Gadget mode of operation can be used to mount an MMC/SD card on the USB
Host. Hence, enable support for the USB Mass Storage (ums) command.
Since this config fragment corresponds to USB DFU functionality which
configures the USB Controller in Gadget mode of operation, other SoCs
which include this fragment for DFU functionality can make use of the
USB MASS Storage functionality as well.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The USB0 instance of USB on J722S SoC is a Designware USB Controller with
the same glue layer (wrapper) as AM62 SoC. In order to support USB DFU boot
and USB DFU flash with USB0, enable the corresponding glue layer driver.
While at it, sync with savedefconfig.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support
for AM62x SoC is applicable to the AM62Px SoC as well. Hence, include it
in "am62px_evm_a53_defconfig" in order to enable support for USB DFU
flash and boot. Remove those configs from "am62px_evm_a53_defconfig" which
are present in the "am62x_a53_usbdfu.config" config fragment that is being
included.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Disable configs which are not required for USB DFU functionality, in
order to allow reusing this fragment for AM62Px SoC.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Include the TI K3 DFU environment to support DFU Boot and DFU Flash.
Also add "usb" to the list of "boot_targets". While at it, add a newline
at the end of the file.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support
for AM62x SoC is applicable to the AM62Ax SoC as well. Hence, include it
in "am62ax_evm_a53_defconfig" in order to enable support for USB DFU flash
and boot.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
In previous commit, incoming standard passage is used by default
when initializing the bloblist, so explicitly BLOBLIST_PASSAGE is
no more needed.
Rename it as BLOBLIST_PASSAGE_MANDATORY to determine the behaviors
when an incoming transfer list does not exist or is invalid.
When it is selected, incoming standard passage is mandatory and
U-Boot will report an error when a valid incoming transfer list is
missing.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Refactor the xferlist to remove the relocating when bloblist passed
from the boot args.
Refactor bloblist init to use incoming standard passage by default
if a valid transfer list exists in the boot args.
For bloblist relocation, use the actual total size if it has a smaller
BLOBLIST_SIZE_RELOC.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The PCS exists only in GMAC1 and relates to SGMII interface and
is used to control the SGMII PHY.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
[trini: Adjust slightly for white space and to move 'start' to within if
block]
Add the dram_init_banksize function to the board file to properly set
DRAM memory sizes during boot.
The commit bc07851897 ("board: ti: Pull redundant DDR functions to a
common location and Fixup DDR size when ECC is enabled") relocated the
dram_init_banksize function from architecture specific initialization to
the TI board initialization code. As a result, boards relying on the
previous setup now require this function to be defined within their
board file to handle DRAM sizing correctly.
Without this function defined the following error appears during boot:
ERROR: Failed to allocate 0x1000 bytes below 0x0.
Fixes: bc07851897 ("board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Add a new event which handles this function refer to commit
("91caa3bb89b1 event: Use an event to replace last_stage_init()")
Signed-off-by: Michael Chang <zhang971090220@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Return value of a function 'strtok_r' is dereferenced at kwbimage.c:1655
without checking for NULL, but it is usually checked for this function.
Signed-off-by: Maks Mishin <maks.mishinFZ@gmail.com>
When performing a build consisting of only a defconfig target and then
this tool, we were missing two dependencies. Add them.
Signed-off-by: Tom Rini <trini@konsulko.com>
First set of u-boot-at91 features for the 2025.07 cycle:
This feature set includes improvements on the atmel-quadspi driver, a
fix for the nand driver, and improvements on the pinctrl driver to be
able to use the Linux DT (also sync on the DT side as well).
When 3-wire mode is claimed on the bus, use the MOSI (output) pin to
receive data. In this mode, since the transfer can only be either TX
or RX, return -EINVAL if both are required at the same time.
Signed-off-by: Hironori KIKUCHI <kikuchan98@gmail.com>
