Make environment support in SPI NOR available in sandbox,
so the environment storage in SPI NOR can be tested in CI.
Enable redundant environment support as well to cover this
in CI tests too.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add support for converting single-copy environment to redundant environment.
In case CRC checks on both redundant environment copies fail, try one more
CRC check on the primary environment copy and treat it as single environment.
If that check does pass, rewrite the single-copy environment into redundant
environment format, indicate the environment is valid, and import that as
usual primary copy of redundant environment. Follow up 'env save' will then
store two environment copies and the system will continue to operate as
regular redundant environment system.
Add test which validates this upgrade path. The test starts with spi.bin
which is pre-populated as single-copy environment and then upgrades that
environment to dual-copy environment.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add test for environment stored in SPI NOR. The test works in a very
similar way to the current test for environment stored in ext4 FS,
except it generates spi.bin file backing the SPI NOR.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In case DEVICE_TREE_DEBUG is set, produce a diff between the base DT and
DT with U-Boot extras, to show how much does the U-Boot DT differ from
the base DT. This is particularly useful together with OF_UPSTREAM, to
minimize the diff between upstream DTs and U-Boot DTs.
This requires DTC 1.7.2 which does not resolve phandles when used in
the 'dtc -I dts -O dts ...' mode. With older DTC, the diff is full of
churn due to the resolved phandles.
Example usage:
$ make r8a779g3_sparrowhawk_defconfig && make DEVICE_TREE_DEBUG=1
$ cat ./dts/upstream/src/arm64/renesas/r8a779g3-sparrow-hawk.dtb.diff
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Synchronize local copy of DTC with Linux 6.17 . This includes the
following picked and squashed commits from Linux kernel. The squash
was necessary, since the DTC here contains changes which were also
part of DTC in Linux alraedy, and the squash helped resolve those
without going back and forth with the changes.
The following commits from Linux are picked:
8f324cd712df7 # scripts/dtc: consolidate include path options in Makefile
b5b3d9b63b0ee # scripts/dtc: Add yamltree.c to dtc sources
7d97a76f226d6 # scripts/dtc: Update to upstream version v1.4.7-14-gc86da84d30e4
ea6f243be74e5 # scripts/dtc: Update to upstream version v1.4.7-57-gf267e674d145
02d435d4eccd8 # scripts/dtc: Update to upstream version v1.5.0-23-g87963ee20693
6e321b7637396 # scripts/dtc: Update to upstream version v1.5.0-30-g702c1b6c0e73
9f19ec91a7a35 # scripts/dtc: dtx_diff - add color output support
8287d642f38d1 # scripts/dtc: Update to upstream version v1.5.1-22-gc40aeb60b47a
4c52deef9225d # scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles"
5d3827e1452ed # scripts/dtc: Remove unused makefile fragments
40dd266887654 # scripts/dtc: Update to upstream version v1.6.0-2-g87a656ae5ff9
8d4cf6b6acb59 # scripts/dtc: use pkg-config to include <yaml.h> in non-standard path
b9bf9ace5ae90 # scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
69a883b6f5ac0 # scripts/dtc: dtx_diff - make help text formatting consistent
8f829108b8aed # scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
b39b4342ac495 # scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
93c6424c486b3 # scripts: dtc: Fetch fdtoverlay.c from external DTC project
0dd574a1d75c3 # scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
ec38b5df8a231 # scripts: dtc: Build fdtoverlay tool
a0c8c431411f5 # scripts: dtc: Remove the unused fdtdump.c file
e7dc653d4e890 # scripts/dtc: Add missing fdtoverlay to gitignore
d2bf5d2e3f09c # scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
a60878f5532d0 # scripts/dtc: dtx_diff: remove broken example from help text
8b739d8658a9b # scripts/dtc: Call pkg-config POSIXly correct
b6eeafa67df00 # scripts/dtc: Update to upstream version v1.6.1-63-g55778a03df61
f96cc4c787588 # scripts/dtc: Update to upstream version v1.6.1-66-gabbd523bae6e
09ab9c092ef2b # scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
ded8a5a498f2d # scripts/dtc: Update to upstream version v1.7.0-95-gbcd02b523429
ee6ff6fca7e71 # scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c
This also includes forward port of U-Boot commit
e8c2d25845 ("libfdt: Revert 6dcb8ba4 from upstream libfdt")
to avoid binary size growth.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In scmi_clk_probe(), in case of CLK_CCF is not enabled, parent private
data is not set, so in scmi_clk_gate(), an uninitialized priv struct is
retrieved.
SCMI request is performed either using scmi_clk_state_in_v1 or
scmi_clk_state_in_v2 struct depending of the unpredictable value of
priv->version which leads to error during SCMI clock enable.
Issue detected on STM32MP157C-DK2 board using the SCMI device tree
stm32mp157c-dk2-scmi.dts.
Fixes: 0619cb3203 ("firmware: scmi: Add clock v3.2 CONFIG_SET support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
If memory allocation for verify_buf fails, then one
needs to make sure that memory allocated for buf is
released.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Commit 2a38e71265 ("sandbox: add FAT to the list of usable env drivers")
made environment storage in FAT available on sandbox, but did not enable
the matching ENV_IS_IN_FAT in sandbox configs. This leads to environment
driver lookup failure when env in non-EXT4 is selected using 'env select':
"
env_driver_lookup: No environment driver for location 3
priority not found
"
Enable the missing ENV_IS_IN_FAT to fix this.
Fixes: 2a38e71265 ("sandbox: add FAT to the list of usable env drivers")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
CMD_NET_LWIP has never existed so it cannot be right. I'm guessing the
intent was to allow print_eth() to be called when NET_LWIP is defined
(NET means "legacy networking stack" as opposed to NET_LWIP which is the
newest (and incompatible) stack). There probably was some mix-up
between CMD_NET and NET options.
The dependency on CMD_NET seems unnecessary as it seems perfectly fine
to run bdinfo without CMD_NET (build and run tested). So let's instead
make the dependency on NET || NET_LWIP.
Let's sync the unit test as well.
Fixes: 95744d2527 ("cmd: bdinfo: enable -e when CONFIG_CMD_NET_LWIP=y")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Replace %pe with %d and adjust the argument accordingly in a dev_err()
call in the pwm-aspeed driver. U-boot doesn't support the %pe format
specifier. Likely it was copied from Linux.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Add new PID4 to ConfigBlock handling:
- 0217 Lino iMX93 Dual 2GB IT
- 0218 Lino iMX91 Solo 2GB IT
- 0219 OSM iMX93 Dual 2GB IT
- 0220 OSM iMX91 Solo 2GB IT
- 0221 Verdin AM62 Dual 1GB ET
Lino and OSM are two new SoM families.
The Verdin variant differs from the existing 0073 Verdin AM62 Dual 1GB ET
by the presence of the GPU (AM625 instead of AM623), the absence of
DSI interface (bridge not mounted) and eMMC size increased to 16GB instead
of 4GB.
Link: https://www.toradex.com/computer-on-modules/lino-arm-family
Link: https://www.toradex.com/computer-on-modules/osm-arm-family
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
If zalloc fails, one needs to free memory previously
allocated in the function. This commit makes sure that
we do not leak any memory.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Fixes: ed34f34dba ("ext4fs write support")
Acked-by: Quentin Schulz <quentin.schulz@cherry.de>
[ Upstream commit cbf164cd44e06c78938b4a4a4479d3541779c319 ]
The original _bin2bcd() function used / 10 and % 10 operations for
conversion. Although GCC optimizes these operations and does not generate
division or modulus instructions, the new implementation reduces the
number of mov instructions in the generated code for both x86-64 and ARM
architectures.
This optimization calculates the tens digit using (val * 103) >> 10, which
is accurate for values of 'val' in the range [0, 178]. Given that the
valid input range is [0, 99], this method ensures correctness while
simplifying the generated code.
Link: https://lkml.kernel.org/r/20240812170229.229380-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun Huang (Jim) <jserv@ccns.ncku.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[visitorckw@gmail.com: Adapt to bin2bcd() in include/bcd.h]
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Semihosting allows a virtual machine to write to the host file system.
Such dangerous settings should not be in a defconfig.
Move it to a CI configuration override.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
tmp_buffer is allocated using malloc but failure
is not handled.
This commit ensures that we do not use a NULL pointer
if malloc fails.
Signed-off-by: Francois Berder <fberder@outlook.fr>
Make sure the end of U-Boot is at 8-byte aligned offset, not 4-byte
aligned offset. This allows safely appending DT at the end of U-Boot
with the guarantee that the DT will be at 8-byte aligned offset. This
8-byte alignment is now checked by newer libfdt 1.7.2 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Our last sync with the kernel was 5.1.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>a #rebased on -next
Since commit 5f520875bd ("kbuild: Bump the build system to 5.1")
CONFIG_CC_OPTIMIZE_FOR_DEBUG has no effect on the non-host code.
This patch reestablishes the prior logic to add
-Og -Wno-maybe-uninitialized
to KBUILD_CFLAGS.
Fixes: 5f520875bd ("kbuild: Bump the build system to 5.1")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Change mt8365_evk_defconfig to use CONFIG_OF_UPSTREAM=y and delete the
U-Boot copy of the devicetree source files for mt8365.
The upstream devicetree is identical to the U-Boot one being removed
(other than having more nodes for devices not used by U-Boot and
upstream fixed a compatible string in &scpsys, also not affecting
U-Boot).
There was one minor glitch with upstream missing a few topckgen macro
definitions, so those are added to the clock driver directly as a
workaround.
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
These are common for all K3 based boards. Add the common values as
defaults and remove from each board defconfig
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
These are common for all K3 based boards. Add the common values as
defaults and remove from each board defconfig.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Seems the "generous 2MB space" is no longer enough for SPL on some K3 R5
platforms so let's increase this to 4MB. That matches what we give to
ARM64 SPL, so combine these.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
These values are already the default, remove them from these defconfigs.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
- Refactor tidss_drv to improve modularity, enabling support for more
display interfaces beyond OLDI in the future
- Add detection and initialization of active OLDI panels using the DT
- Port tidss_oldi.c from the upstream Linux kernel oldi series[0] and
derive several APIs from it to determine the dual link pixel order
- Add tidss_oldi_init() and helper routines to handle OLDI-specific
setup and move related helper routines to tidss_oldi.c
[0]: https://lore.kernel.org/all/20250528122544.817829-1-aradhya.bhatia@linux.dev/
Signed-off-by: Swamil Jain <s-jain1@ti.com>
Tested-by: Anshul Dalal <anshuld@ti.com>
Some framebuffers (i.e MediaTek) do not have regular stride - its line
length is more than the display width by 8 pixels (on MT6878). As such,
introduce the optional stride property, which fixes these framebuffers.
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
The variable bmp_load_addr is used to hold the address in memory of
where to put the splash image (as a bmp). For 32/64bit correctness, this
needs to be a ulong and not u32 today.
Signed-off-by: Tom Rini <trini@konsulko.com>
Julien Stephan <jstephan@baylibre.com> says:
Commit 2dcf143398 ("dm: video: Repurpose the 'displayport' uclass to 'display'")
left the display_read_edid() function unused by mistake.
This series addresses that oversight and introduces a new useful cmd.
Patch 1:
- Refactors display_read_timing() to use the existing
display_read_edid() function, eliminating redundant code.
- Marks display_read_edid() as static since it is not used outside of
the file.
Patch 2:
- Adds a new read_edid command, which can be very useful for debugging
or developing new display drivers.
- As this command uses display_read_edid(), the function is made
non-static again.
Link: https://lore.kernel.org/r/20250630-read_edid_cleanup-v1-0-ec7d425472c7@baylibre.com
Add a new command to read EDID info from connected display.
When applicable EDID can also be retrieved by commands such as:
i2c dev x
i2c edid 0x50
but the new read_edid function relies on the implementation of the
read_edid callback from DISPLAY driver.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
This driver references the SZ_ macros while relying on an indirection
inclusion of <linux/sizes.h>. Add the missing include directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
The debug macros in this driver make use of the z prefix when printing
regular, non-size_t variables and this results in a warning. Drop 'z'.
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver references IO macros while relying on an indirection
inclusion of <asm/io.h>. Add the missing include directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
The logic for how to handle this video driver is slightly odd. Only in
the case of when CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 is
enabled do we need to have this file built, and otherwise we have a
dummy function in use. Correct the logic by only building this file when
needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
A few video drivers cannot build without access to some platform
specific header files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Looking these drivers over, all of them cannot build without access to
some platform specific header files. Express those requirements in
Kconfig as well. Furthermore, update the logic a bit more to reflect
which parts are optional when other drivers are enabled and which parts
cannot be enabled (meaningfully) by themselves.
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
