Add SYS_CPU automatic inclusion jh7110-u-boot.dtsi to item of config list
DEVICE_TREE_INCLUDES as starfive-visionfive2-u-boot.dtsi and rename file.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Drop visionfive2 per-board -u-boot.dtsi stubs and instead rely on
automatic inclusion of jh7110-u-boot.dtsi
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Sync automatic dtsi inclusion overrides for JH7110 CPU with upstream
"riscv: dts: starfive: jh7110: bootph-pre-ram hinting needed by boot
loader" from upstream Linux conor/riscv-dt-for-next commit 8181cc2f3f21
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Prune jh7110-common-u-boot.dtsi (clocks, qspi flash, eeprom, and
bootph-pre-ram hints now upstream since devicetree-rebasing v6.16).
In preparation for removal of per-dts jh7110-*-u-boot.dtsi replace include
by next dependency jh7110-u-boot.dtsi in automatic dtsi inclusion order.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add an alternative implementation that use Zalrsc extension only for
HART lottery and SMP locking to support SMP on cores without "Zaamo"
extension available. The Zaamo implementation is still prioritized if
both of them are available, since it takes fewer instructions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Ratified on Apr. 2024, the original RISC-V "A" extension is now split
into two separate extensions, "Zaamo" for atomic operations and "Zalrsc"
for load-reserved/store-conditional instructions.
For now, we've already seen real-world designs implement the Zalrsc
extension only[2]. As U-Boot mainly runs with only one HART, we could
easily support these designs by not using AMO instructions in the
hard-written assembly if necessary, for which this patch introduces two
new Kconfig options to indicate the availability of "Zaamo" and "Zalrsc".
Note that even with this patch, "A" extension is specified in the ISA
string passed to the compiler as long as one of "Zaamo" or "Zalrsc" is
available, since they're only recognized with a quite recent version of
GCC/Clang. The compiler usually doesn't automatically generate atomic
instructions unless the source explicitly instructs it to do so, thus
this should be safe.
Link: d94c64c63e # [1]
Link: https://lore.kernel.org/u-boot/20250729162035.209849-9-uros.stajic@htecgroup.com/ # [2]
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Imply OF_UPSTREAM in platform Kconfig option and adapt existing boards
to use the correct upstream devicetree paths.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Change the shift patterns for the unaligned memory move and copy code
to deal with big-endian by definign macros to change the shfit left and
right to go the opposite way.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Introduce the initial device tree support for Andes Voyager board.
We will convert to OF_UPSTREAM once the patch series for kernel is merged.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The Voyager is Andes' first RISC-V development board.
It is built around Qilai SoC,
which includes Andes AX45MP quad-core cluster.
Introduce the Kconfig entry for the Voyager board.
Signed-off-by: Randolph Sheng-Kai Lin <randolph@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The commit d92fdb6067 ("binman: Add option for pointing to separate
description") added support for separating binman description to own file
not the be the part of DT for OS.
The main reason is that binman is not passing dt schema validation that's
why want to keep it separated.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Properties didn't match dt binding that's why should be fixed.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
OpenSBI expects mmu-type to be present in DT that's why add it. Without it
OpenSBI disable CPU node which ends up in not working boot.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
ifdef CONFIG_CPU only works in U-Boot proper but macro is not working when
XPL phases are used. In this case CONFIG_SPL_CPU is also defined and can be
disabled which is causing compilation error.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
TH1520 SoC ships two MAC controllers based on Designware Ethernet IP
that are capable of Gigabit operation. Describe them in SoC devicetree
and enable them for Lichee Pi 4A.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
TH1520 SoC ships DMA peripherals that could only reach the first 32-bit
range of memory, for example, the GMAC controllers. Let's limit the
usable top of RAM below 4GiB to ensure DMA allocations are accessible to
all peripherals.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Select PINCTRL_TH1520 in CPU Kconfig entry and update defconfig for
existing TH1520-based boards to ensure PINCTRL is enabled.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Describe the three pin controllers integrated in TH1520 SoC. Since we
don't have support for clocks in the AON region, a dummy fixed-clock
node is added to supply the pin controller locating in it.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Test for big-endian either via __RISCVEB__ which migth be
rather old, or check the BYTE_ORDER if the compiler defines
it (which should be any modern gcc like v12)
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add support to build code big-endian if the board supports
it. Updates the makefile to pass the correct compiler and
elf flags.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Preserve CLINT node for SPL, whose IPI functionality is essential for
operation of a multi-core system.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
On coldboot, only HART 0 among the four HARTs of TH1520 is brought up by
hardware, and the remaining HARTs are in reset states, requiring manual
setup of reset address and deassertion to function normal. Introduce a
routine to do the work.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
C910 cores integrated in TH1520 SoC provide various customized CSRs for
configuring core behavior, including cache coherency and timing, branch
predication, and clock gating for internal components.
This patch sets them up for efficient operation and satisfying
requirements of an SMP system.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Although timer component of the CLINT isn't fully compatible with the
generic RISC-V ACLINT, the IPI component behaves the same.
As the CLINT doesn't have corresponding riscv_aclint_timer driver
available, let's try looking for a compatible SYSCON device directly
when no riscv_aclint_timer device could be found on IPI initialization.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
This will allow arch(s) that use device tree blobs to pad the end of the
device tree so they can be modified by board files at run time. This will
help prevent errors such as FDT_ERR_NOSPACE from occurring.
Signed-off-by: Eric Schikschneit <eric.schikschneit@novatechautomation.com>
[trini: Change default order so that X86 && EFI_APP works correctly]
Rasmus Villemoes <ravi@prevas.dk> says:
There's really no reason for the gd pointer to have the volatile
qualifier.
In fact, I claim that it's completely unnecessary and just pessimizes
code generation and forces ugly casts in lots of places. For example,
see the casts in drivers/core/tag.c where elements are added to
gd->dm_taglist, or a helper such as cyclic_get_list() that should not
be needed.
Also, it is what ends up standing in the way of an otherwise
innocent code cleanup of list.h:
https://lore.kernel.org/u-boot/20250522165656.GB2179216@bill-the-cat/
Note that riscv, x86 as well as arm64 with LTO enabled has not had
this volatile qualifier, so it's unlikely there's any generic code
that depends on it.
Link: https://lore.kernel.org/r/20250604195612.2312979-1-ravi@prevas.dk
It's slightly ironic that riscv at very first had the gd pointer
volatile qualified [6020faf62c ("riscv: nx25: include: Add header
files to support RISC-V")], removed that back in 2018
[40717eb849 ("riscv: checkpatch: Fix use of volatile")], and then in
2020 this helper was added [6b9966e1aa ("riscv: define function
set_gd()")] which needlessly had volatile in the prototype.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add an OpenSBI entry to the FIT image. As it expects an FDT to be
passed, corresponding FDT entry is generated with of-list as well.
As SPL now passes a full FDT for following stages, proper U-Boot image
is packed into u-boot-with-spl.bin without a devicetree copy included.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
These operations rely on a customized M-mode CSR, MHCR, which isn't
available when running in S mode.
Let's fallback to the generic weak stub when running in S mode to avoid
illegal accesses.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Symbols in spl.c only function correctly in SPL stage. Build the file
for SPL only to avoid weak symbols in proper U-Boot being unexpectedly
reloaded.
Fixes: 5fe9ced355 ("riscv: cpu: Add TH1520 CPU support")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Describe the newly-supported clock controller of TH1520 in SoC
devicetree, replace dummy clocks with the controller-supplied ones and
add correct clocks for GPIO controllers.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The clock driver is essential for TH1520 SoCs to operate. Select the
driver in SoC Kconfig entry.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
TH1520 SoC ships several IOPMPs protecting various on-chip peripherals.
They must be configured before accessing the peripherals. Let's
initialize them in SPL harts_early_init().
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Adjust Kconfig and defconfig and add SPL initialization code for
Lichee Pi 4A. Then enable SPL support which we've added for TH1520 SoC
earlier. The board devicetree is changed to use TH1520 binman
configuration to generate bootable images.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add binman configuration for TH1520 SoC, whose BROM loads the image
combined into SRAM and directly jumps to it. The configuration creates
u-boot-with-spl.bin where the SPL code locates at the start and the DDR
firmware is shipped.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Describe DRAM controller integrated in TH1520 SoC and preserve it in SPL
devicetree blob.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Memory node is necessary for TH1520 SPL to configure size and base
address of DRAM. Let's preserve it in SPL devicetree blob.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
SPL for TH1520 requires CPU and boot UART nodes to function. Preserve
them in SPL devicetree blob with bootph-pre-ram property.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Introduce the SoC-specific code and corresponding Kconfig entries for
TH1520 SoC. Following features are implemented for TH1520,
- Cache enable/disable through customized CSR
- Invalidation of customized PMP entries
- DRAM driver probing for SPL
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Designed before a standard set of cache management operations defined in
RISC-V, earlier T-Head cores like C906 and C910 provide CMO through the
customized extension XTheadCMO, which has been used in the CV1800B port
of U-Boot.
This patch splits XTheadCMO-related code into a generic module, allowing
SoCs shipping T-Head cores to share the code.
Link: https://github.com/XUANTIE-RV/thead-extension-spec
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
JH7110 drivers are missing support for CPU frequency scaling, so override
upstream device-tree to use default clock rates for syscrg. This override
duplicates a portion of jh7110-common-u-boot.dtsi file planned for removal.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Liang <ycliang@andestech.com>
- use upstream alias name for cpu and timer nodes
- remove bootph-pre-ram hint from parent nodes
- drop S7 cpu core "okay" status
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Move unnecessary clock frequency assignment out of device-tree and into the
board config header so that the ns16550 serial driver can successfully init
during SPL after failing to resolve the parent clock from upstream dts. The
serial driver will then resolve clock frequency from device-tree node parent
clock at init during Main app as it is expected by upstream.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Fix the erroneous header guard for insn-def.h to reflect the correct
header name.
Fixes: bfc8ca3f7f ("riscv: Add support for defining instructions")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
