Reorganize misplaced properties by moving board-common settings from
socfpga_agilex_socdk-u-boot.dtsi to socfpga_agilex-u-boot.dtsi to maintain
proper separation between common and board-level configurations.
Signed-off-by: Tingting Meng <tingting.meng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
SPL checks for a magic word in the system manager's scratch
register to determine if an L2 reset has occurred. If detected,
SPL places all slave CPUs (CPU1–3) into WFI mode. The master
CPU (CPU0) then initiates a warm reset by writing to the RMR_EL3
system register and also enters WFI mode.
This warm reset flow is handled entirely within the HPS. The
function `socfpga_sysreset_request()` triggers the warm
reset, and upon SPL re-entry, the updated `lowlevel_init_soc64.S`
handles the necessary initialization.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Put all slave CPUs (CPU1-3) into WFI mode. Master CPU (CPU0) writes
the magic word into system manager's scratch register to indicate
the system has performed L2 reset and request reset manager to
perform hardware handshake and then trigger L2 reset. CPU0 put
itself into WFI mode. L2 reset will reboot all HPS CPU cores after
which all HPS cores are in WFI mode. L2 reset is followed by warm
reset request by SPL via RMR_EL3 system register.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Agilex retrieves its clock manager address via probing its own clock
driver model during the SPL initialization.
Therefore, excluding Agilex from calling its clock driver in misc
driver to retrieve the clock manager address.
Once all SoC64 devices has been successfully transition to clock
driver model method, this implementation will be cleaned up.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The DDR data rate must be set correctly in the DDRIOCTRL
register according to the Actual Clock Frequency (ACF) value.
By enabling the reading of ACF value from bit 18 of the boot
scratch register during initialization, the DDR data rate is
able to be configured accurately.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The boot scratch cold reg 8 is shared between DBE, DDR init progress
update and Linux EDAC. This patch defines how the bits are used by
respective features above and their macro names used in U-Boot.
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Setting up firewall regions based on SDRAM memory banks configuration
(up to CONFIG_NR_DRAM_BANKS banks) instead of using whole address space.
First 1 MiB (0 to 0xfffff) of SDRAM is configured as secure region,
other address spaces are non-secure regions. The ARM Trusted Firmware (ATF)
image is located in this first 1 MiB memory region. So, this can prevent
software executing at non-secure state EL0-EL2 and non-secure masters
access to secure region.
Add common function for firewall setup and reuse for all SoC64 devices.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
The base address of system manager can be retrieved
using DT framework through the system manager driver.
Enable system manager support for Agilex by probing the
system manager driver to initialize during SPL boot up.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Refactor system manager initialization by searching for system manager
alias in Agilex5 device tree instead of manually passing node name to
the device model calling function
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Replace cm_wait_for_fsm() function with wait_for_bit_le32() function
which supports accurate timeout.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Asynchronous aborts were previously masked at SPL
entry.
To ensure early detection of system errors
such as ECC faults or bus errors, asynchronous aborts
should be explicitly unmasked by clearing the A-bit in
the DAIF register during Agilex SPL initialization.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
# Conflicts:
# arch/arm/mach-socfpga/spl_agilex.c
Enable backup for data section to support warm reset in Agilex SPL as
no SPL image would be reloaded in warm reset.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
For phyCORE-i.MX93 SoMs with i.MX93 parts running in VOLT_LOW_DRIVE mode
(SoCs with speed grade fuse set to 900 MHz) reduce usdhc clocks from 400
MHz to 266 MHz. Do this in board code since global imx9 board_fix_fdt()
is not used in case of phycore-imx93 board since commit d3b9b79968
("board: phytec: imx93: Add eeprom-based hardware introspection").
While at it, add a note to ft_board_setup() function to inform that
fixup for Linux device-tree is taken care by ft_system_setup() in imx9
global arch/arm/mach-imx/imx9/soc.c implementation.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reuse and export low_drive_freq_update() function. This way global imx9
board_fix_fdt() doesn't duplicate code. While low_drive_freq_update()
can be reused on boards such as phyCORE-i.MX93 (TARGET_PHYCORE_IMX93)
which is not using the global imx9 board_fix_fdt() implementation.
While at it, make printout logic less verbose by only outputting on the
error condition and not on each successful clock fixup. Also drop now
invalid comment (low_drive_freq_update() now does fixup for internal and
kernel device-tree).
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Update Agilex SPL code to implement device tree model
for firewall registers setup by using DTreg driver to
probe from device tree for the firewall settings instead
of calling firewall driver function.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Combine all MMC, NAND and QSPI configs into single defconfig which is named
as "socfpga_agilex_defconfig". This will be the default defconfig to use.
It supports booting from all three flashes using ARM Trusted Firmware (ATF)
as the secure runtime monitor.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Update the ARMv8 generic timer frequency register (cntfrq_el0)
with the actual hardware timer frequency (COUNTER_FREQUENCY_REAL).
The generic timer frequency was set to 0x200000000 during boot clk
which needs to be set to 0x400000000 when transition from boot clk
to PLL clk.
This will ensure that subsequent timer operations are based on the
correct frequency, ensuring accurate timekeeping.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
In dwxgmac_of_get_mac_mode there is a test for mac_mode which will
return if false. After this point mac_mode is guaranteed to be true so
there is no need to test for this. Remove that test.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
In xgmac_probe there is a direct return after the point where unwind
gotos start to be used to undo actions performed by earlier code. Use
the appropriate unwind goto instead.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
Free the allocated buffer in case of an error.
Fixes: 9e63786e2b ("tools: mkeficapsule: rework the code a little bit")
Addresses-Coverity-ID: 345917 Resource leak
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
On more recent versions of setuptools the warning about not being able
to find the files specified in license_files has re-appeared. This is
because as best I can tell, it can't and won't look in $(srctree) but
rather only subdirectories of scripts/dtc/pylibfdt. Since we already
provide both SPDX tags and a license field with the SPDX contents, let
us just drop license_files as it's not mandatory.
Signed-off-by: Tom Rini <trini@konsulko.com>
If the allocation if the bounce buffer fails, virtio_free_pages is called
with a random value from the stack.
Ensure that vring.size is initialized.
Fixes: 37e53db38b ("virtio: Allocate bounce buffers for devices with VIRTIO_F_IOMMU_PLATFORM")
Addresses-Coverity-ID: 453314 Uninitialized scalar variable
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
s25_s28_mdp_ready() returns 1 when spansion_sr_ready() returns negative
value (error code). Fix this problem by following Linux implementation.
Fixes: 1c3dd193b5 ("mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t")
Reported-by: Hiroyuki Saito <Hiroyuki.Saito2@infineon.com>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
The 'blks' variable in scsi_read/write/erase functions is updated
regardless of pass/fail of the scsi operation . If the scsi operation
fails, 'blkcnt' is updated using an incorrect value of 'blks'. This
wrong 'blkcnt' is returned to the caller and it assumes all blocks were
processed correctly.
Fix this by updating the 'blks' variable only if the scsi operation
succeeds.
Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Bryan Brattlof <bb@ti.com> says:
The AM62Ax was created right when TI was shifting to their high security
(HS-FS and HS-SE) processes. During this transition a small subset of
AM62A parts where configured to use the old "GP" security for internal
and for select groups of partners but never sold for the wider public.
To help simplify the build and to avoid any confusion of which security
configurations are supported going forward remove the GP builds for the
AM62A SoCs.
Link: https://lore.kernel.org/r/20250729-no-62a-gp-v1-0-1dbdb4469ad3@ti.com
The AM62Ax SoC family was the last part from TI to support the GP
security variant, however this security variant was used mostly
internally and with select early partners and never sold publicly.
To simplify things and to avoid any confusion on which parts are
supported in the future, remove the GP tiboo3.bin builds from binman.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Wadim Egorov <w.egorov@phytec.de>
The AM62Ax SoC family was the last part from TI to support the GP
security variant, however this security variant was used mostly
internally and with select early partners and never sold publicly.
To simplify things and to avoid any confusion of which parts are
supported in the future, remove the GP tiboot3.bin builds from binman.
Signed-off-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
binman can omit packaging an optional blob when it is missing.
This allows us to not bother with config options.
The core challenge is the interaction between tf-a and OP-TEE where
U-Boot/binman does not know whether tf-a was built with SPD=opteed or
without. This is important because tf-a might jump into the void when no
optee_os is present, leading to boot failure. Thus by marking it
optional, user is prompted to recheck (due to the warning message)
whether they really have the right combination of tf-a and optee.
Due to a bug in binman, we had to guard binman tee.bin with OPTEE config
as builds would error when tee.bin was not present in path; Even though
optee_os was marked as optional in the binman tree. Since the bug has
been resolved in
commit d4f61eae2a ("Merge patch series "Fix handling of optional blobs in binman"")
we can mark it optional again without getting build errors.
Note that after this commit a warning will be printed when optee is not
present for a binman build.
Image 'image' is missing optional external blobs but is still functional: tee-os
/binman/section/fit/images/tee/tee-os (tee.bin):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Signed-off-by: Yannic Moog <y.moog@phytec.de>
In fecmxc_probe if a timeout is detected when resetting the chip no
error code is set before taking the error exit. This could lead to a
silent failure. Instead set an error code.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Enable SoC pull up for USB OTG ID pin in SPL. There is no dedicated pull up
resistor on the SoM itself, and the pull up is mandatory for correct USB OTG
ID pin detection. U-Boot proper already configures the USB OTG ID pin pull
up via DT pinctrl node entry.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
In sc_seco_secvio_dgo_config there is a check for data being NULL but
this occurs after data has already been dereferenced. All callers of the
function provide a valid pointer for data so no need for the NULL check.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
The minimum frequency of Fref (Fin / p) is 6MHz for the PLL AC
Electrical Characteristics. Setting p with 9 or 8 voilates the Spec.
Update the settings to match Spec.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Add setting default temperatures to the weak version of
get_cpu_temp_grade so these values will not be used uninitialised.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
For an unknown pll type the error path neglects to free the memory just
allocated. Add the free.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Various fixes for smatch warnings, the i2c one might be also coming in
via Heiko / I2C tree, let me know if there is conflict.
There is also W77Q51NW SPI NOR ID support, with the DT portion omitted
for now.
Enable support for Winbond SPI NOR on Retronix R-Car V4H Sparrow Hawk board,
this is required to support W77Q51NW on new board revision EVTB1 operational.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In rswitch_probe the error detection after the call to devm_clk_get is
very wrong. It checks the value of ret which is uninitialised at that
point. Instead it should be using the macros for including errors into
pointers.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add IDs for Winbond W77Q51NW, 512M-bit Secure Serial Flash Memory
with Post-Quantum Cryptography, Dual/Quad SPI, QPI and DTR . The
flash part is similar to W25Q512NWM .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
In rcar_iic_xfer if nmsgs == 0 the ret will not be assigned to. As ret
will always be 0 if the for loop is entered, may as well just return 0.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
In rcar_clk_set_rate64_div_table the unsigned variable 'value' is used
to receive the return value from rcar_clk_get_table_val which returns an
int and then attempts to test for being less than 0, which can never be
true. Instead declare value as an int so the code can behave as
expected. Also remove initial values from 'value' and 'div' as they are
not needed.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
i2c updates for v2025.10-rc2
bugfixes:
- rcar_iic: do not use unitialised variable
from Andrew
- fix coverity issue in cmd/i2c.c
from Heiko
new driver:
late, but hopefully okay for rc2, as already picked up when
merge window was open, but there was a problem in common code,
which is now fixed
- new i3c driver support from Dinesh
