It is not functionally possible to use the code enabled by
PARTITION_TYPE_GUID without having EFI_PARTITION be enabled as well. Not
all users of the former had ensured that the latter was enabled however,
so audit all current users and then as appropriate select or imply
EFI_PARTITION as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issue with the dependencies
for BOOTM_OPTEE. This symbol needs to select BOOTM_LINUX and in turn
depend on the library symbols that have to be enabled for BOOTM_LINUX to
be valid (LIB_BOOTI, LIB_BOOTM and LIB_BOOTZ).
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
As exposed by "make randconfig", we have an issues around a number of
symbols that we select without making sure to also select their
prerequisite symbols. Add these missing symbols.
Signed-off-by: Tom Rini <trini@konsulko.com>
It turns out that there is lots of code in the wild, including in the
U-Boot tree itself, which used to rely on
test -n $somevar
to yield false when $somevar is not defined or empty. See for example
all the occurrences of 'test -n $fdtfile'. That was really only a
quirk of the implementation that refused calls with argc < 3, and not
because it was interpreted as
test -n "$somevar"
which is how this should be spelled.
While not exactly conforming to POSIX, we can accomodate such scripts
by special-casing a single argument "-n" to be interpreted as if it
comes from code as above with empty $somevar.
Since we only just added the ability to test a string for emptiness
using the single-argument form, it is very unlikely that there is code
doing
test "$str"
which would now fail if $str happens to be exactly "-n"; such a test
should really always be spelled
test -n "$str"
Fixes: 8b0619579b ("cmd: test: fix handling of single-argument form of test")
Reported-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/29745
- Migrate imx95-toradex-smarc to use upstream devicetree.
- Force fsl crypto driver to select ARCH_MISC_INIT to avoid crashes when
using CAAM.
- Support upstream Linux reset-gpios property for the i.MX PCI driver.
- Avoid duplication of DDR tables on i.MX8MP DHCOM SoM.
- Several cleanups on tqma6 platform.
- Convert i.MX8MP boards to DM_PMIC.
- Add phyCORE-i.MX91 support.
- Drop unnecessary BOARD_EARLY_INIT_F usage.
The data only relocation mode should be selected on per-SoC or per-core
basis, make these options non-user-configurable. The SoC or cores which
require this have to select this option using "default" keyword.
Fixes: d9eee3d178 ("arm: relocate: Introduce data-only relocation mode")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
There are no longer any users of the legacy non-DM pl01x serial driver.
This lets us remove both CONFIG_PL011_SERIAL as well as
CONFIG_PL011_SERIAL_RLCR references. We still have SPL users of the
non-DM portions of the code.
Signed-off-by: Tom Rini <trini@konsulko.com>
When both environment copies have valid CRCs but the flag bytes do not
match any recognized pair, env_flash_init() falls through without
setting gd->env_addr or gd->env_valid. This is a problem because:
1. env_init() then sets gd->env_addr = &default_environment (in RAM).
2. In env_flash_load(), the pointer comparison
gd->env_addr != &flash_addr->data evaluates true (RAM != flash),
triggering the pointer swap that selects the secondary copy.
3. The repair logic writes OBSOLETE (0x00) to the non-active flag but
cannot promote the other flag from 0x00 to ACTIVE (0x01) because
NOR flash requires a sector erase to set bits. Both copies end up
with flag=0x00.
4. On every subsequent boot, flag1 == flag2 triggers the ENV_REDUND
path, printing a spurious "recovered successfully" warning until
an explicit saveenv erases and rewrites the sectors.
The recognized flag values are ACTIVE (0x01), OBSOLETE (0x00), and
erased (0xFF). Of the 256 possible flag values, the existing chain of
if/else-if handles only three: 253 of 256 values fall through without
setting gd->env_addr. Combined with 0x00 (already stuck on NOR),
254 of 256 values eventually reach the persistent-warning state.
Other env backends (SPI flash, NAND, MMC) handle this through
env_check_redund() in env/common.c, which uses a numeric comparison
of the flags as a serial counter and always reaches a decision. The
CFI flash backend is the only one that uses its own flag-matching
logic.
Add a catch-all else clause that defaults to the primary copy with
ENV_REDUND status, matching the existing behavior for the flag1==flag2
case. This ensures gd->env_addr is always set, preventing the
unintended pointer swap. The condition is recoverable via saveenv.
Signed-off-by: Neil Berkman <neil@xuku.com>
Reproducer: https://gist.github.com/neilberkman/4155612a7942d3f510f204eb85e61943
The SPI flash backend (env/sf.c) has a related but distinct issue:
it retained legacy boolean save semantics but its load path now uses
the common serial-number logic in env_check_redund(), creating an
inconsistency under interrupted updates. That has wider implications
for fw_env.c and would need separate discussion.
Add MAINTAINERS file containing board-specific information and
the name of the board maintainer.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Introduce timing patch which converts 2 GiB DRAM timings to 4 GiB 1-rank
timings. This is a new configuration which carries IS43LQ32K01B DRAM part.
The 512 MiB SoM strapping that was never used is repurposed for this part.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The 2 GiB and 4 GiB 2-rank DRAM timings on i.MX8MP DHCOM are very
similar. Instead of carrying around two copies of almost identical
timing tables, implement a patch of the 2 GiB table to convert it
into 4 GiB 2-rank table and pass the result to DRAM initialization
code. This saves us 13640 Bytes in SPL, and frees up space for more
DRAM initialization tables.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The DRAM size tables are shared by SPL and U-Boot proper, deduplicate
those tables into lpddr4_timing.h . No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
The inline ECC configuration is identical for 2 GiB DRAM variants
and 4 GiB DRAM variants of the SoM, no matter the rank count. Fold
the ECC configuration directly into spl.c to simplify the upcoming
deduplication. No functional change.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Convert the board to use DM_PMIC instead of the legacy SPL I2C/PMIC
handling.
Changes include:
- Enable DM_PMIC, DM_PMIC_PCA9450, and SPL_DM_PMIC_PCA9450 in defconfig.
- Drop legacy SPL I2C and PMIC options.
- Remove manual I2C1 pad setup and legacy power_pca9450_init() usage.
- Use DM-based pmic_get() with the DT node "pmic@25".
- Update PMIC register programming to use struct udevice API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Tested-by: Yannic Moog <y.moog@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
On the SMARC iMX95 the WiFI UART and JTAG signals are shared. The
WIFI_UART_EN signal is used to select between these two modes.
Currently, there is no hog present in the device tree but the
configuration needs to be added, as once the device tree comes from
mainline Linux, a hog will drive WIFI_UART_EN high to select by
default the UART function during boot.
Enable CONFIG_GPIO_HOG to apply gpio-hog definitions in the device tree.
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Allow CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX95.
Remove the now obsolete device tree files:
- imx95-toradex-smarc-dev.dts
- imx95-toradex-smarc.dtsi
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
This platform enables CONFIG_BOARD_EARLY_INIT_F and then has a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini@konsulko.com>
In the case of SPI_XFER_BEGIN | SPI_XFER_END, the function creates a
buffer of double the size of the transaction, so that it can write the
data in into the second half. It sets the rx_offset to len, and in the
while loop we are setting an internal "din" to buffer + rx_offset.
However, at the end of each loop, the driver copies "buffer + 2 *
cmd_len" back to the data_in pointer.
This commit changes the source of the data to buffer + rx_offset.
Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
The CAAM JR driver is initialized from arch_misc_init(). If
ARCH_MISC_INIT is not enabled, the driver is never initialized,
which can lead to crashes or hangs (e.g. during hash operations).
Select ARCH_MISC_INIT when enabling FSL_CAAM to ensure proper
initialization.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Suggested-by: Fabio Estevam <festevam@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
New SoM revision use series termination for eMMC signals while older do
not. To prevent signal overshot on older revisions, DSR must be set and
limited. The eMMC type is used to differentiate between revisions.
Keep a table with all types, that are known to require DSR.
Signed-off-by: Paul Gerber <Paul.Gerber@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Update functions to use the common baseboard header and
select TQ_COMMON_BB Kconfig option for MBa6 and WRU4.
While at it, remove empty implementations that are now covered by
board/tq/common.
Signed-off-by: Paul Gerber <Paul.Gerber@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
TQMa6 and other SoMs from TQ-Systems GmbH need a baseboard. Therefore
functionality of U-Boot board callbacks may be distributed between SoM
and baseboard implementation.
To prevent code duplication and boilerplate implement a baseboard specific
API for TQ boards with weak defaults that can be filled out for baseboard
implementations as needed.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
The SoM (TQMa6) can be used on various baseboards. No modifications to
the SoM files should be required to use the SoM on different baseboards.
Therefore, include the SoM headers in the baseboard.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Remove the definition of CFG_POWER_PFUZE100_I2C_ADDR and
TQMA6_PFUZE100_I2C_BUS as it is not used.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Prepare moving boiler plate code out of board confguration header and
prepare to share a lot of things between boards.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing
PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it
to the existing board-code "phycore_imx93", and rename that board to
"phycore_imx91_93" to reflect the dual SoCs support. While at it, also
rename and change common files accordingly. This way i.MX91 and i.MX93
SoC variants of the phyCORE SoM share most of the code and documentation
without duplication, while maintaining own device-tree and defconfigs
for each CPU variant.
Supported features:
- 1GB LPDDR4 RAM
- Debug UART
- EEPROM
- eMMC
- Ethernet
- SD-card
- USB
Product page SoM:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
The driver requests explicitly "reset-gpio" property, not the one with
"gpios" suffix but upstream Linux kernel deprecated it in 2021.
Existing upstream Linux kernel DTS is being changed to "reset-gpios"
property, thus update the driver to read that one too.
Note that driver is probably broken already, because it parsed GPIO in
standard way respecting the flags and on top of that applied the
"reset-gpio-active-high" flag, thus "reset-gpio ACTIVE_LOW" with the
"reset-gpio-active-high" property would be double inverted.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Pull request net-20260331.
net:
- airoha_eth & pcs_airoha driver fixes
- Rework some symbol dependencies
- dwc_eth_xgmac: Move DMA reset and pad calibration after PHY init
- rtl8169: add support for RTL8125d
- rswitch: Avoid NULL pointer dereference during PHY access
- rswitch: Remap CPU to bus addresses using dev_phys_to_bus()
- phy: dp83867: reset PHY on init to ensure clean state
net-lwip:
- nfs: fix buffer overflow when using symlinks
- tftp: update image_load_addr after successful transfer
[trini: Add missing "if NET" to CMD_DHCP select's CMD_BOOTP]
Signed-off-by: Tom Rini <trini@konsulko.com>
Use dev_phys_to_bus() to convert CPU addresses of DMA descriptors
into bus addresses of DMA descriptors. This is necessary on hardware
which does not have 1:1 mapping between CPU and memory addressed by
the DMA. This has no impact on other hardware which does not need
this conversion.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
After a warm reboot, the PHY is left in power-down state
(BMCR_PDOWN set) causing auto-negotiation to timeout when
running the dhcp command.
Fix this by calling phy_reset() in dp83867_config() which
brings the PHY to a known clean state. The existing
DP83867_SW_RESTART is removed as it is redundant after phy_reset().
Fixes: 721aed7912 ("net: phy: Add support for Texas Instruments DP83867")
Signed-off-by: Pranav Tilak <pranav.vinaytilak@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
do_tftpb() parses the load address into a local variable laddr but
never updates the global image_load_addr. Commands that rely on
image_load_addr as their default address (e.g. 'bmp info')
therefore operate on the wrong address when called without
an explicit argument after tftpboot.
Update image_load_addr to laddr only on a successful transfer, so
that it accurately reflects where data was actually loaded.
Fixes: 4d4d783812 ("net: lwip: add TFTP support and tftpboot command")
Signed-off-by: Pranav Sanwal <pranav.sanwal@amd.com>
Reviewed-by: Jerome Forissier <jerome.forissier@arm.com>
At the very early stage when PHY ID is being auto-detected, the
PHY device is not yet instantiated and rswitch_etha .phydev is
still NULL. Add missing check for this condition and perform C22
fallback access in this PHY ID auto-detection case.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
