Ryan Chen <ryan_chen@aspeedtech.com> says:
AST2700 is the 8th generation of Integrated Remote Management
Processor introduced by ASPEED Technology Inc. It is a Board
Management Controller (BMC) SoC family with a dual-die architecture:
SoC0 ("CPU" die with four ARM Cortex-A35 application cores) and
SoC1 ("IO" die with peripherals) each SoC have its own SCU PLLs,
clock dividers and reset domains.
Link: https://lore.kernel.org/r/20260526-ast2700_clk-v3-0-a4cd24c214d6@aspeedtech.com
Add initial support for the ASPEED AST2700, an arm64 (Cortex-A35)
Baseboard Management Controller (BMC) SoC. AST2700 is Aspeed's 8th
generation BMC and uses a dual-die architecture: SoC0 (the "CPU"
die) hosts the four Cortex-A35 cores and its own SCU at 0x12c02000,
while SoC1 (the "IO" die) hosts the peripherals and its own SCU at
0x14c02000.
This commit adds:
- ASPEED_AST2700 Kconfig option and the ast2700 mach subdir
(mach Makefile, ast2700/Kconfig, board/aspeed/evb_ast2700/*)
- arm64 MMU map covering the SoC device window and the DRAM
region at 0x4_0000_0000 (up to 8 GiB)
- lowlevel_init.S for early CPU bring-up
- cpu-info: print SoC ID (AST2700/2720/2750 A0/A1/A2 variants)
and reset cause (cold reset, EXT reset, WDT reset)
- board_common: dram_init via UCLASS_RAM, AHBC timeout init
- platform: env_get_location() that selects SPI/eMMC based on
the IO-die HW strap; arch_misc_init() that exposes
${boot_device} and ${verify} to the boot script
- SCU0/SCU1 register layout header (scu_ast2700.h)
- configs/evb-ast2700_defconfig and include/configs/evb_ast2700.h
for the AST2700 EVB board
The defconfig depends on ast2700-evb.dts, which is introduced in
a subsequent patch; this commit must be applied with the
remaining series for evb-ast2700_defconfig to build.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
__FUNCTION__ and __PRETTY_FUNCTION__ are gcc extensions that predate
the C99 __func__ identifier. scripts/checkpatch.pl emits a warning
for any new use of __FUNCTION__ and recommends __func__ instead. In
C (unlike C++) __PRETTY_FUNCTION__ is identical to __func__ because
C function names do not carry signature information, so the
distinction has no behavioural effect here. The majority of the tree
already uses __func__, but a handful of older files in arch/, board/,
boot/, drivers/, examples/ and include/ still carry the gcc spellings
(55 occurrences of __FUNCTION__ across 19 files plus one
__PRETTY_FUNCTION__ in drivers/usb/musb-new/omap2430.c). Convert
them all to the C99 form so the tree is consistent and new patches
in these areas do not have to follow an outdated local style.
Ten "Unnecessary ftrace-like logging - prefer using ftrace" warnings
remain on the printf("%s\n", __func__) and dbg("%s\n", __func__)
function-entry traces in drivers/net/rtl8169.c (behind DEBUG_RTL8169*
preprocessor guards) and drivers/usb/host/ohci-hcd.c. checkpatch
matches the literal "%s\n", __func__ shape regardless of the wrapper,
so silencing those warnings would require changing the debug message
text or removing the traces entirely.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add board support for the Freebox Nodebox 10G based on the Marvell
Armada 8040 SoC. This board features:
- Quad-core ARMv8 AP806 with dual CP110 companions
- eMMC storage via Xenon SDHCI controller
- 1G SGMII Ethernet on CP0 lane 5
- I2C buses for peripheral access
- NS16550 UART console at 115200 baud
The implementation includes:
- Device tree for the Nodebox 10G hardware
- Dedicated board directory (board/freebox/nbx10g/)
- Board-specific Kconfig and defconfig
The U-Boot comphy bindings (phy-type/phy-speed) differ from the
mainline Linux PHY framework bindings used by phy-mvebu-cp110-comphy,
so U-Boot and the kernel each have their own device tree.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Add the Allied Telesis x220 board. There are a number of other variants
with the same CPU block that are sold under some different brand names
but the x220 was first.
The x220 uses the AlleyCat3 switch chip with integrated ARMv7 CPU.
Because of this it is reliant on a binary blob for the DDR training. In
upstream u-boot this is replaced by an empty file.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Add reset_reset() and reset_reset_bulk() functions to the reset
controller API. These functions assert and then deassert reset signals
in a single call, providing a convenient way to pulse/toggle a reset
line.
This mimics the Linux kernel's reset_control_reset() and
reset_control_bulk_reset() APIs. The new functions are useful for
drivers that need to cycle a reset line during initialization or
error recovery but with also passing delay parameter.
If a driver implements the rst_reset op, it will be called directly
with the delay parameter. Otherwise, the reset core performs
reset_assert(), optional udelay(), and reset_deassert() as fallback.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/55ddd313c9e7b2d4dc79ab36bdd0040f871610f6.1779709539.git.michal.simek@amd.com
The TQMa6UL[L]x is a family of SoMs based on the i.MX6UL[L] SoCs.
They are available either with board connectors or as LGA packages
with solder balls. Add Support for the SoM and its combination with
our MBa6ULx carrier board. For use with the MBa6ULx carrier board,
the LGA variant is soldered onto an adapter board.
Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
The watchdog base addresses are now obtained from the devicetree via
ofnode_* functions. Remove the hardcoded macro definitions as they are
no longer needed.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Caleb Ethridge <caleb.ethridge@analog.com> says:
This series performs a general cleanup of the default U-boot environment
for sc5xx boards, stemming from the decision to no longer store the
environment in the SPI flash. The environments for each board have been
edited to contain the minimum number of commands needed for all supported
boot modes to avoid confusion, and the default boot command synced to spi
for all boards that support it. The filesystem for the SPI flash has also
been changed from jffs2 to ubifs.
A bug with the Ethernet reset line on the sc594 has been fixed, and the
sc573 has been renamed from the EZKIT to the EZLITE to match the name of the
publically available board. EZKIT was only used internally before release.
Preliminary binman support for sc5xx boards has been removed as it was unused
and full support never added.
Link: https://lore.kernel.org/r/cover.1779370141.git.caleb.ethridge@analog.com
Now that we have both resolved the problem on sandbox that lead to a comment
about linker list entries being omitted as well as made linker lists
never list themselves as unused, we can update the event header file.
Remove the now obsolete comment and "__used" attribute marker.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Whenever we declare something to be in a linker list, we want it to be
included. This is why all of our linker scripts have a line similar to:
KEEP(*(SORT(__u_boot_list*)));
to ensure that any linker list found in any of the archives we are
linking together makes it to the final object. Remove the places where
we set an attribute saying that it is unused, or maybe_unused.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove the SC5XX_LOADADDR Kconfig option, replace its users with
CONFIG_SYS_LOAD_ADDR, and update the ADI boot environment to use
`loadaddr`.
SC5XX_LOADADDR was an ADI-specific duplicate of standard U-Boot
load address handling. U-Boot already uses CONFIG_SYS_LOAD_ADDR
for the default load address and `loadaddr` for boot commands,
so keeping separate SC5XX-specific names is redundant.
Signed-off-by: Ozan Durgut <ozan.durgut@analog.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Update the bootargs used in SPI/OSPI bootmode
to reflect change from jffs2 to ubifs for the
SPI's filesystem, and remove the jffs2file variable
from the environment as it is now unused.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Rename the SC573 EZKIT board to EZLITE across the device tree,
defconfig, board file, and related Kconfig/Makefile entries to
match with release naming. EZKIT was used internally before the
official product release.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Switch the nfsboot and other relevant commands to use
wget instead of tftp. This also includes the addition of
the httpdstp variable for selecting the wget port.
There is no longer any automatic DHCP configuration. Before
running a command with wget, either 'dhcp' must be run or
the 'ipaddr' and 'serverip' variables must be set. Additionally,
the nfsboot command looks for the file named 'fitImage' on the
server to use to boot.
The default port is set to 8000 instead of the usual 80
to allow for use with an unprivileged web server.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Update the default boot commands to match the expected
bootargs in Linux and new SPI partitioning scheme.
Because the environment is no longer stored in the SPI
flash, imagesize has been removed and replaced with a fixed
length read to load from the SPI. Additionally the partitions
of the mmc have been updated. The first partition holds the fitImage
at /fitImage, and the second partition contains the rootfs.
With this change, the imagefile environment variable has also been
eliminated, the image in the first partition is expected to always
be named fitImage.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Remove the update_spi family of commands from the U-Boot
environment. These commands are not standard in U-Boot,
and boot media programming has moved to Linux, so the
commands can be safely removed.
Additionally, this commit removes the adi_stage2_offset,
adi_rfs_offset, imagefile, jffs2file, and init_ethernet variables that
were consumed by the update commands as they are no longer needed.
CONFIG_SC5XX_UBOOT_OFFSET and CONFIG_SC5XX_ROOTFS_OFFSET are also
removed.
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
SYS_RX_ETH_BUFFER represents the number of Ethernet receive packet
buffers. It therefore doesn't make sense it's reachable if NET isn't
enabled.
Direct users of SYS_RX_ETH_BUFFER are:
- drivers/net/rtl8169.c, only compiled if CONFIG_RTL8169=y, depends on
CONFIG_NETDEVICES=y, depends on CONFIG_NET=y,
- drivers/net/fsl_enetc.h, via ENETC_BD_CNT, included in
drivers/net/{fsl_enetc.c,fsl_enetc_mdio.c,mscc_eswitch/felix_switch.c}
First two only compiled if CONFIG_FSL_ENETC=y, latter with
CONFIG_MSCC_FELIX_SWITCH=y. Both symbols depends on
CONFIG_NETDEVICES=y, depends on CONFIG_NET=y.
- include/net-common.h via PKTBUFSRX,
Indirect users via PKTBUFSRX:
- arch/sandbox/include/asm/eth.h
- according to ./tools/qconfig.py -l -f CONFIG_SANDBOX CONFIG_NO_NET,
all sandbox defconfigs have network enabled so ignore this for now,
- drivers/dma/ti/k3-udma.c
- sets UDMA_RX_DESC_NUM to that if defined, else 4. PKTBUFSRX is
CONFIG_SYS_RX_ETH_BUFFER which defaults to 4. According to
./tools/qconfig.py -l -f CONFIG_TI_K3_NAVSS_UDMA '~CONFIG_SYS_RX_ETH_BUFFER=4'
no defconfig enabling this DMA driver sets CONFIG_SYS_RX_ETH_BUFFER
to anything but the default of 4, so regardless of NET being built
UDMA_RX_DESC_NUM will always be 4 with current defconfigs.
- drivers/net/{airoha_eth.c,bcm6348-eth.c,bcm6368-eth.c,cortina_ni.c,
dc2114x.c,eepro100.c,essedma.c,ethoc.c,ftgmac100.c,ftmac100.c,
hifemac.c,mcffec.c,mpc8xx_fec.c,pic32_eth.c,sandbox.c,sni_ave.c,
sni_netsec.c,ti/am65-cpsw-nuss.c,ti/cpsw.c,ti/icssg_prueth.c,
tsec.c} all depends on CONFIG_NETDEVICES=y, depends on
CONFIG_NET=y,
- net/lwip/net-lwip.c, only compiled if CONFIG_NET_LWIP=y, depends on
CONFIG_NET=y,
- net/{net.c,tcp.c}, only compiled if CONFIG_NET_LEGACY=y, depends on
CONFIG_NET=y,
- net/net-common.c, only compiled if CONFIG_NET=y,
- test/cmd/wget.c, only compiled if CONFIG_NET_LEGACY=y, depends on
CONFIG_NET=y,
- test/image/spl_load_net.c, only compiled if CONFIG_SPL_UT_LOAD_NET=y,
depends on CONFIG_SPL_ETH=y, depends on CONFIG_SPL_NET=y, depends on
CONFIG_NET_LEGACY=y, depends on CONFIG_NET=y,
Indirect users via net_rx_packets[PKTBUFSRX]. This array is only
externally defined in net/net-common.c which is only compiled if
CONFIG_NET=y.
Users of net_rx_packets are:
- drivers/net/{airoha_eth.c,bcm6348-eth.c,bcm6368-eth.c,cortina_ni.c,
dc2114x.c,dm9000x.c,essedma.c,ethoc.c,fsl_enetc.c,ftgmac100.c,
ftmac100.c,hifemac.c,ks8851_mll.c,macb.c,mcffec.c,mpc8xx_fec.c,
mscc_eswitch/jr2_switch.c,mscc_eswitch/luton_switch.c,
mscc_eswitch/ocelot_switch.c,mscc_eswitch/serval_switch.c,
mscc_eswitch/servalt_switch.c,pic32_eth.c,sandbox-raw.c,
sandbox.c,smc911x.c,sni_ave.c,sni_netsec.c,ti/am65-cpsw-nuss.c,
ti/cpsw.c,ti/icssg_prueth.c,tsec.c,xilinx_axi_mrmac.c} all
depends on CONFIG_NETDEVICES=y, depends on CONFIG_NET=y,
- drivers/usb/gadget/ether.c only built if CONFIG_$(PHASE_)USB_ETHER=y,
depends on CONFIG_NET=y/CONFIG_SPL_NET=y,
- net/lwip/net-lwip.c only compiled if CONFIG_NET_LWIP=y, depends on
CONFIG_NET=y,
- net/net.c, only compiled if CONFIG_NET_LEGACY=y, depends on
CONFIG_NET=y,
- net/net-common.c, only compiled if CONFIG_NET=y,
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Move the definition of tsec_private within the only file that makes use
of it.
This adds the benefit of include/tsec.h not referencing PKTBUFSRX (which
is set to CONFIG_SYS_RX_ETH_BUFFER, which we're trying to move to be
under CONFIG_NET dependency) anymore. Considering drivers/net/tsec.c is
only built if CONFIG_NET=y, this is fine.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Tom Rini <trini@konsulko.com> says:
This series does a few small but important cleanups to how we check for,
and initialize a bloblist. The first thing is that the way things are
done today, our HANDOFF code can only work with a fixed bloblist
location, so express that requirement in Kconfig. Next, we demote the
scary message about "Bloblist at ... not found" to a debug because we
most often see that because the bloblist doesn't (and can't) exist yet.
Finally, we remove bloblist_maybe_init and split this in to an exists
and a real init. This results in practically no growth (between 8 bytes
growth to 12 bytes saved, with some outliers saving much more thanks to
knowing it's impossible to have been passed a bloblist yet). This also
cleans up some of the code around checking for / knowing about a
bloblist existing.
Link: https://lore.kernel.org/r/20260519162225.770071-1-trini@konsulko.com
With bloblist, we need to both see if one already exists as well as
create one if it does not. However, the current implementation leads to
odd cases where we attempt to create a bloblist before this is possible
and have things be overly complicated when we are given one to work
with.
This reworks things to instead have a bloblist_exists function, which as
the name implies checks for an existing bloblist. This is used in
the case of booting, to see if we have one and in turn if we have a
device tree there as well as in the bloblist_init function to see if we
need to do anything.
In practical details, we move the logic from bloblist_init that was
checking for a bloblist to the new bloblist_exists function and then can
clarify the logic as it is much easier to state when we know we do not
have one rather than all the ways we might have one. Then we have the
locations that set gd->bloblist now also set the GD_FLG_BLOBLIST_READY
flag.
Reviewed-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for the Geist board based on the Renesas R8A779MD (M3Le) SoC, a
register-compatible variant of the R8A77965 (M3N) with reduced peripherals.
The Geist board design references the Renesas Salvator-X/XS boards, adapting
their configuration for the R8A779MD SoC.
The board will be switched to OF_UPSTREAM once the DTs land in upstream.
Signed-off-by: Huy Bui <huy.bui.pz@bp.renesas.com>
Signed-off-by: Nguyen Tran <nguyen.tran.pz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Small screens on the order of 256x144 pixels can't fit much text at 8x16,
and 4x6 is virtually illegible, so add an in-between 6x8 font from Linux.
Font data obtained from lib/fonts/font_6x8.c in the Linux kernel at commit
db65872b38dc ("lib/fonts: Remove internal symbols and macros from public
header file")
Link: db65872b38/lib/fonts/font_6x8.c
Signed-off-by: Alexey Charkov <alchark@flipper.net>
RAUC slot selection is now handled by the RAUC bootmeth, which all
phytec K3 boards use. Remove the unused env-based logic.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Martin Schwan <m.schwan@phytec.de>
The load addresses for DFU download binaries were hardcoded for K3
devices which required redefinition of such env for boards that deviated
from the expected K3 memory map (such as AM6254atl EMV).
This patch replaces the hardcoded addresses with their corresponding
Kconfig options making the k3_dfu.env more general.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
In the TI's K3 bootflow of tiboot3.bin -> tispl.bin -> u-boot.img:
(R5 SPL) (A53 SPL)
We currently provide a common dfu_alt_info_ram for both R5 SPL and A53
SPL which is not intuitive in a regular bootflow where each binary
should only request it's immediate next stage.
This patch updates dfu_alt_info_ram such that the R5 SPL would only
request for tispl.bin and A53 SPL would only request u-boot.img.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Daniel Golle <daniel@makrotopia.org> says:
This series adds dm-verity support to U-Boot's FIT image infrastructure.
It is the first logical subset of the larger OpenWrt boot method series
posted as an RFC in February 2026 [1], extracted here for independent
review and merging.
OpenWrt's firmware model embeds a read-only squashfs or erofs root
filesystem directly inside a uImage.FIT container as a FILESYSTEM-type
loadable FIT image. At boot the kernel maps this sub-image directly from
the underlying block device via the fitblk driver (/dev/fit0, /dev/fit1,
...), the goal is that the bootloader never even copies it to RAM.
dm-verity enables the kernel to verify the integrity of those mapped
filesystems at read time, with a Merkle hash tree stored contiguously in
the same sub-image just after the data. Two kernel command-line
parameters are required:
dm-mod.create= -- the device-mapper target table for the verity device
dm-mod.waitfor= -- a comma-separated list of block devices to wait for
before dm-init sets up the targets (needed when fitblk
probes late, e.g. because it depends on NVMEM
calibration data)
The FIT dm-verity node schema was upstreamed into the flat-image-tree
specification [2], which this implementation tries to follow exactly.
The runtime feature is guarded behind CONFIG_FIT_VERITY. If not
enabled the resulting binary size remains unchanged. If enabled the
binary size increases by about 3kB.
[1] previous submissions:
RFC: https://www.mail-archive.com/u-boot@lists.denx.de/msg565945.html
v1: https://www.mail-archive.com/u-boot@lists.denx.de/msg569472.html
v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg570599.html
v3: https://www.mail-archive.com/u-boot@lists.denx.de/msg573223.html
v4: https://www.mail-archive.com/u-boot@lists.denx.de/msg574000.html
[2] flat-image-tree dm-verity node spec:
795fd5fd7f
Link: https://lore.kernel.org/r/cover.1778887196.git.daniel@makrotopia.org
When mkimage encounters a dm-verity subnode inside a component image
node it now automatically invokes veritysetup(8) with --no-superblock
to generate the Merkle hash tree, screen-scrapes the Root hash and Salt
from the tool output, and writes the computed properties back into the
FIT blob.
The user only needs to specify algorithm, data-block-size, and
hash-block-size in the ITS; mkimage fills in digest, salt,
num-data-blocks, and hash-start-block. Because --no-superblock is
used, hash-start-block equals num-data-blocks with no off-by-one.
The image data property is replaced with the expanded content (original
data followed directly by the hash tree) so that subsequent hash and
signature subnodes operate on the complete image.
fit_image_add_verification_data() is restructured into two passes:
dm-verity first (may grow data), then hashes and signatures.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Make hexdump.h work in host-tool builds by using 'uint8_t' instead
of 'u8', and including either user-space libc <ctype.h> for host-tools
or <linux/ctype.h> when building U-Boot itself.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add fit_verity_build_cmdline(): when a FILESYSTEM loadable carries a
dm-verity subnode, construct the dm-mod.create= kernel cmdline parameter
from the verity metadata (block-size, data-blocks, algo, root-hash,
salt) and append it to bootargs.
Also add dm-mod.waitfor=/dev/fit0[,/dev/fitN] for each dm-verity device
so the kernel waits for the underlying FIT block device to appear before
setting up device-mapper targets. This is needed when the block driver
probes late, e.g. because it depends on NVMEM calibration data.
The dm-verity target references /dev/fitN where N is the loadable's
index in the configuration -- matching the order Linux's FIT block
driver assigns block devices. hash-start-block is read directly from
the FIT dm-verity node; mkimage ensures its value equals num-data-blocks
by invoking veritysetup with --no-superblock.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add FIT_VERITY_NODENAME and the complete set of FIT_VERITY_*_PROP
constants for the dm-verity child node of filesystem-type images, plus
the five optional boolean error-handling property names aligned with the
flat-image-tree specification.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Following commit 4300f9f4c5 ("board: st: stm32mp25: support dynamic
A/B bank bootup"), this patch enables automatic detection of the active
A/B bank on STM32MP15 platforms by retrieving partition GUIDs from FWU
metadata.
This ensures the system correctly identifies the bootable partitions
even in multi-bank scenarios, falling back to a standard bootable flag
scan if the UUIDs are missing.
To enable A/B bank bootup on STM32MP15 boards, add the following Kconfig
options to the stm32mp15[_basic]_defconfig:
CONFIG_FWU_MULTI_BANK_UPDATE=y
CONFIG_FWU_MDATA=y
CONFIG_FWU_NUM_BANKS=2
CONFIG_FWU_NUM_IMAGES_PER_BANK=3
CONFIG_CMD_FWU_METADATA=y
CONFIG_FWU_MDATA_V2=y
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Environment callbacks can already be configured from Kconfig with
CONFIG_ENV_CALLBACK_LIST_STATIC, but static environment flags still
require board headers to define CFG_ENV_FLAGS_LIST_STATIC.
Add CONFIG_ENV_FLAGS_LIST_STATIC and use it as the only board-provided
static environment flags list. Convert the remaining default-config users
from CFG_ENV_FLAGS_LIST_STATIC to defconfig settings and drop the legacy
header macro from ENV_FLAGS_LIST_STATIC.
Move the environment flags format documentation out of README and into
the developer environment documentation. Include the format in the
Kconfig help as well.
This lets boards configure writeable-list policy and type validation
from defconfig without adding a config header solely for env flags.
This preserves the behavior of default configs. Header-only cases that
were inactive in upstream defconfigs are not converted into defconfig
entries: iot2050 can add its list when enabling ENV_WRITEABLE_LIST, and
smegw01 can add mmcdev:dw support if the unlocked SYS_BOOT_LOCKED=n
configuration is needed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Walter Schweizer <walter.schweizer@siemens.com>
Sync include/ec_commands.h from upstream commit 4f3d17aa34
("skywalker: set SLEEP_TIMEOUT_MS to 50 seconds"). The new file makes
two build assumptions that do not hold for U-Boot.
It hides '<stdint.h>' from __KERNEL__ builds, leaving UINT16_MAX
(used by EC_RES_MAX) undefined for U-Boot; widen the gate to
'!defined(__KERNEL__) || defined(__UBOOT__)'
It gates '<linux/limits.h>' on '#ifdef __KERNEL__'; the matching
'#else' branch defines BIT()/BIT_ULL()/GENMASK()/GENMASK_ULL()
locally, assuming kernel headers provide those macros otherwise.
U-Boot defines __KERNEL__ too but has no <linux/limits.h>. Nest a
'!defined(__UBOOT__)' check around the include so the __UBOOT__ path
stays in the __KERNEL__ branch (no local BIT/GENMASK defines), which
avoids redefinition warnings against U-Boot's linux/bitops.h. Pull
in linux/bitops.h up front for U-Boot so the file's own BIT() and
GENMASK() uses still resolve.
Adapt callers to two interface changes. The 'ec_current_image' enum
tag is now 'ec_image' (EC_IMAGE_* constants unchanged); rename it in
affected files to match. The VBNV-context interface was dropped
upstream, but it still used in lab Chromebooks; keep those constants and
structs in cros_ec.h
Likewise, MEC_EMI_BASE and MEC_EMI_SIZE are a U-Boot-local addition to
ec_commands.h that the upstream sync removes; preserve them in cros_ec.h
next to the VBNV block, and switch the only consumer
(arch/x86/cpu/apollolake/cpu_spl.c) to include cros_ec.h
Signed-off-by: Simon Glass <sjg@chromium.org>
Currently we are trying to work out if the vendor id is from
a virtio-mmio device and then casting a u32 to a char* and using
it as a C-string. By chance there is usually a zero after the u32
and it works.
Since the vendor id we are trying to convert to a string is QEMU's
just define a value for the QEMU vendor id, check if the vendor
id matches and then use a predefined string for "QEMU".
I don't think we should have been assumming all virtio-mmio vendor
ids are printable ASCII chars in the first place so do this special
casing just for QEMU. If the vendor id isn't QEMU print the hex
value of it.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
The m68k QEMU virt machine doesn't use devicetree, yet, so
allow it to create virtio-mmio instances via platform data.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Add support for building U-Boot for Cortex-M33 RSIP core in Renesas
R-Car Gen5 R8A78000 X5H SoC. The main goal is to start U-Boot on the
Cortex-M33 RSIP core, which initializes the hardware and then starts
the Cortex-M33 SCP and Cortex-A720 cores which run the SCP firmware
and applications software respectively. The SCP is responsible for
platform resource management, and is used to start other CPU cores.
The Cortex-M33 build contains its own r8a78000_ironhide_cm33_defconfig
which configures the build for aarch32 instruction set compatible with
the ARMv8M core. The build also uses -cm33 DT and -u-boot.dtsi which
are derived from their non-CM33 counterparts, and add CM33 specifics.
The arch/arm/mach-renesas/u-boot-rsip.lds is derived from generic
arch/arm/cpu/u-boot.lds with adjustments to cater to the RSIP core,
those are entrypoint before vectors, __data_start/__data_end symbols
for data-only relocation, and placement of BSS into read-write SRAM
area.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The R-Car Gen5 R8A78000 X5H uses HSCIF as default serial console
interface. Select CFG_HSCIF to make debug UART code also configure
serial console interface as HSCIF instead of SCIF in case the
CONFIG_DEBUG_UART would be enabled.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Use macro SCP_CLOCK_ID_CLK_S0D6_PERE_MAIN for SCMI clock 1691
instead of hardcoding the number in DT. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
