Enable OF_UPSTREAM to use upstream Linux kernel DT source as a base
for U-Boot control DT. Retain currently present parts of the DT which
are not yet part of upstream Linux kernel DT in -u-boot.dtsi files
until they get replaced by upstream equivalents. Add renesas/ prefix
to the DEFAULT_DEVICE_TREE as part of the switch.
Unused i2c2..i2c8 nodes have been removed, and will become available
once upstream Linux kernel DT adds those nodes.
The DRAM_RSV_SIZE has been updated to cover first 518 MiB of DRAM,
which are reserved for firmware and other use.
Note that all DT parts in -u-boot.dtsi are not considered stable DT
bindings and may change before they land in Linux kernel and become
stable DT ABI.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The shared LX2160A board file calls helpers that only exist when
their subsystem is enabled. Gate them on the matching CONFIG_*:
- pci_init() under CONFIG_PCI.
- fdt_fixup_mc_ddr() and fsl_rgmii_init() under CONFIG_FSL_MC_ENET.
- qixis_*() and the QIXIS branch of checkboard() under
CONFIG_FSL_QIXIS; cpu_name(buf) moves out so the non-QIXIS path
still prints "Board: <name>".
- EVENT_SPY_SIMPLE on init_func_vid moves inside the
CONFIG_VOL_MONITOR_LTC3882_READ guard (was outside, dangling
symbol when LTC3882 off).
#if / #ifdef, not IS_ENABLED(), because the helpers are themselves
conditionally compiled.
While here, lx2160a_common.h: fix BOOT_TARGET_DEVICES_MMC
1 arg vs 2 args and gate the MMC target on CONFIG_CMD_MMC,
not CONFIG_MMC.
No functional change for NXP boards: LX2160ARDB, LX2160AQDS, or
LX2162AQDS, but mainly build clean up in order to support
other NXP lx2160a boards without those HW dependencies.
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Switch to the upstream device tree, which already includes the UART
nodes we need for the DM.
We also need to increase malloc area before relocation otherwise you'll
get the following error and the board panics:
DRAM: Initializing....using SPD
alloc space exhausted ptr 414 limit 400
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The main use case for u-boot on Apple silicon based devices is to
provide an EFI based bootloader for operating systems. This uses a
generic u-boot image with DTBs passed from an earlier boot loader
(m1n1). Use the generic board name "mac" for this purpose.
Signed-off-by: Janne Grunau <j@jannau.net>
Enable automatic detection of the active A/B bank by retrieving
partition GUIDs from FWU metadata.
This ensures the system correctly identifies the bootable partitions
even in multi-bank scenarios, falling back to a standard bootable flag
scan if the UUIDs are missing.
To enable A/B bank bootup on stm32mp25 boards, add the following Kconfig
options to the stm32mp25_defconfig:
CONFIG_FWU_MULTI_BANK_UPDATE=y
CONFIG_FWU_MDATA=y
CONFIG_FWU_NUM_BANKS=2
CONFIG_FWU_NUM_IMAGES_PER_BANK=3
CONFIG_CMD_FWU_METADATA=y
CONFIG_FWU_MDATA_V2=y
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Introduce fwu_mdata_get_image_guid() to retrieve a specific image GUID
from the FWU metadata based on the bank index and image type GUID.
This allows identifying the correct partition in multi-bank (A/B)
scenarios, ensuring the correct image is targeted depending on the
current bank.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The STM32MP13 default environment only handles MMC and serial/USB boot.
When TF-A reports BOOT_FLASH_SPINAND the boot_device variable is set to
'spi-nand' but bootcmd_stm32mp never redirects boot_targets to ubifs0,
so distro_bootcmd falls through to MMC/USB.
This change mirrors the STM32MP15 logic:
- Add a BOOT_TARGET_UBIFS entry to BOOT_TARGET_DEVICES so that
bootcmd_ubifs0 is defined (ubi part UBI; ubifsmount ubi0:boot).
- Add the 'spi-nand' / 'nand' clause to bootcmd_stm32mp so that
boot_targets is set to 'ubifs0' when booting from NAND.
Signed-off-by: Austin Shirley <austin@deadband.dev>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: uboot-stm32@st-md-mailman.stormreply.com
Add a new PHY_COMMON_PROPS library that provides helper functions for
PHY drivers to read standardized polarity properties from the device
tree node:
- phy_get_rx_polarity() / phy_get_tx_polarity()
- phy_get_manual_rx_polarity() / phy_get_manual_tx_polarity()
The dt-bindings/phy/phy.h header with PHY_POL_NORMAL, PHY_POL_INVERT,
and PHY_POL_AUTO constants is provided via dts/upstream/include, which
is already in the build include path.
Ported from Merge tag 'phy-for-7.0':
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Link: https://git.kernel.org/linus/e7556b59ba65179612bce3fa56bb53d1b4fb20db
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Depending on the phase selection (single or multi), the FPWM bits
configured forces the regulator to operate in PWM mode. In case of
multi-phase selection, the FPWM_MP bits enforce the regulator to also
operate in multi-phase. This fixes correct multi-phase operation.
While at this, correct incorrect macro alignment as well.
Fixes: 065a452ae6 ("power: regulator: tps65941: add regulator support")
Link: https://www.ti.com/lit/ds/symlink/tps6594-q1.pdf
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Takuma Fujiwara <t-fujiwara1@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Update the allocation flags inline documentation to follow the kernel
object like macro documentation specification.
Use active voice for the short descriptions.
Signed-off-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The number EFICONFIG_ENTRY_NUM_MAX - 1 must be printable
to field key of struct eficonfig_entry.
Fixes: 1f0583beeb ("eficonfig: set EFICONFIG_ENTRY_NUM_MAX to INT_MAX - 1")
Fixes: 23aa0502a4 ("eficonfig: increase the number of menu entries")
Addresses-Coverity-ID: 583414 - Out-of-bounds write
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The R-Car Gen5 SoCs contains Cortex-M33, Cortex-R52 and Cortex-A720AE
cores. Add U-Boot build options for the Cortex-M33 core.
Since the Cortex-M33 core is a 32bit core, select V8M and ARM64 for
RCAR64 accordingly. Select TMU timer on the 32bit core, where it is
used instead of the ARMv8 timer. Adjust TMU timer base address to match
the address map of the Cortex-M33 core. Disable unused OF_BOARD_SETUP
as well as unavailable POSITION_INDEPENDENT configuration options.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Once we complete the support for RISC-V Allwinner D1 (sun20i), we will need
to prefix $fdtfile with the vendor prefix to match the Linux device-tree
directory structure.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Allow dynamic configuration of the SPI word length. This is required
for controllers and slaves that need to operate with non-standard
word lengths, such as 9-bit wide transfers.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
* MMC fixes for Genio 520/720 (mt8189)
* SPI NOR Flash controller fixes
* SPI NOR Flash support for Genio 520/720
* PMIC controller fixes
* PMIC support for Genio 1200 (mt8195)
* Drop CONFIG_IDENT_STRING to be consistent across the platform
* Remove empty header on mt7622
An UMS session with eMMC device specifier "ums C mmc dev.part1,dev.part2"
exposes the same eMMC HW partition 'part2' twice instead of exposing both
HW partitions 'part1' and 'part2'. Fix this by switching the eMMC HW
partition before block device read/write access.
An eMMC is represented by a single struct blk_desc, with the currently
selected HW partition being stored in this struct blk_desc. Each call to
part_get_info_by_dev_and_name_or_num() with partition string dev[.partN]
does trigger HW partition switch by calling blk_get_device_part_str() ->
blk_get_device_part_str() -> get_dev_hwpart() -> get_dev_hwpart() ->
blk_dselect_hwpart(). The ums_init() iterates over the device specifier
string and calls part_get_info_by_dev_and_name_or_num() in a loop for
each dev[.partN] entry used as the partition string. If the device
specifier string contains more than one dev[.partN] partition strings
for the same dev device, then it is the HW partition described in the
last dev[.partN] partition string entry that is accessed for all dev
device partition strings in the device specifier string, because that
last dev[.partN] partition string entry was the last one that triggered
blk_dselect_hwpart() call for that device.
To access the expected HW partition for every dev[.partN] partition string
entry, it is necessary to call blk_dselect_hwpart() before each block read
or write. Store HW partition described for each dev[.partN] partition string
in struct ums and use the stored value to make it so.
The blk_dselect_hwpart() does test whether the currently selected HW
partition is already configured in hardware and does not reconfigure
the hardware if that is the case, therefore for the majority of block
reads and writes, blk_dselect_hwpart() is a no-op with negligible
performance impact.
Example reproducer is listed below. The last sector of both eMMC HW BOOT
partitions is populated with distinct test pattern and UMS is launched:
"
=> mmc dev 1 1 ; mmc read $loadaddr 0x1fff 1 ; md $loadaddr 4
switch to partitions #1, OK
mmc1(part 1) is current device
MMC read: dev # 1, block # 8191, count 1 ... 1 blocks read: OK
84000000: 1234abcd 1234abcd 1234abcd 1234abcd ..4...4...4...4.
=> mmc dev 1 2 ; mmc read $loadaddr 0x1fff 1 ; md $loadaddr 4
switch to partitions #2, OK
mmc1(part 2) is current device
MMC read: dev # 1, block # 8191, count 1 ... 1 blocks read: OK
84000000: 567890ef 567890ef 567890ef 567890ef ..xV..xV..xV..xV
=> ums 0 mmc 1.1,1.2
UMS: LUN 0, dev mmc 1, hwpart 1, sector 0x0, count 0x2000
UMS: LUN 1, dev mmc 1, hwpart 2, sector 0x0, count 0x2000
"
Read of the two block devices on host without this fix produces
identical data present in HW BOOT partition 2:
"
$ dd if=/dev/sdX of=mmc-a.bin ; dd if=/dev/sdY of=mmc-b.bin
$ hexdump -C mmc-a.bin | tail -n 3 | head -n 1 ; \
hexdump -C mmc-b.bin | tail -n 3 | head -n 1
003ffe00 ef 90 78 56 ef 90 78 56 ef 90 78 56 ef 90 78 56 |..xV..xV..xV..xV|
003ffe00 ef 90 78 56 ef 90 78 56 ef 90 78 56 ef 90 78 56 |..xV..xV..xV..xV|
"
Read of the two block devices on host with this fix produces the
expected distinct data from either HW BOOT partition 1 or 2:
"
$ dd if=/dev/sdX of=mmc-a.bin ; dd if=/dev/sdY of=mmc-b.bin
$ hexdump -C mmc-a.bin | tail -n 3 | head -n 1 ; \
hexdump -C mmc-b.bin | tail -n 3 | head -n 1
003ffe00 cd ab 34 12 cd ab 34 12 cd ab 34 12 cd ab 34 12 |..4...4...4...4.|
003ffe00 ef 90 78 56 ef 90 78 56 ef 90 78 56 ef 90 78 56 |..xV..xV..xV..xV|
"
Reported-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Quentin Schulz <foss+uboot@0leil.net> says:
This migrates the net options away from the main Kconfig to net/Kconfig,
rename the current NET option to NET_LEGACY to really highlight what it
is and hopefully encourage more people to use lwIP, add a new NET
menuconfig (but keep NO_NET as an alias to NET=n for now) which then
allows us to replace all the "if legacy_stack || lwip_stack" checks with
"if net_support" which is easier to read and maintain.
The only doubt I have is wrt SYS_RX_ETH_BUFFER which seems to be needed
for now even when no network is configured? Likely due to
include/net-common.h with PKTBUFSRX?
No change in behavior is intended. Only change in defconfig including
other defconfigs where NO_NET=y or NET is not set, in which case NO_NET
is not set or NET=y should be set in the top defconfig. Similar change
required for config fragments. See commit log in patch adding NET
menuconfig for details.
This was tested based on 70fd0c3bb7 ("x86: there is no
CONFIG_UBOOT_ROMSIZE_KB_12288"), from within the GitLab CI container
trini/u-boot-gitlab-ci-runner:noble-20251013-23Jan2026 and set up
similarly as in "build all platforms in a single job" GitLab CI job.
#!/usr/bin/env bash
set -o pipefail
set -eux
ARGS="-BvelPEWM --reproducible-builds --step 0"
./tools/buildman/buildman -o ${O} --force-build $ARGS -CE $*
./tools/buildman/buildman -o ${O} $ARGS -Ssd $*
O=../build/u-boot/ ../u-boot.sh -b master^..b4/net-kconfig |& tee ../log.txt
I can't really decipher the log.txt, but there's no line starting with
+ which would be an error according to tools/buildman/builder.py help
text. Additionally, because I started the script with set -e set and
because buildman has an exit code != 0 when it fails to build a board,
and I have the summary printed (which is the second buildman call), I
believe it means all builds passed.
The summary is the following:
aarch64: (for 537/537 boards) all +0.0 rodata +0.0
uniphier_v8 : all +1 rodata +1
u-boot: add: 0/0, grow: 1/0 bytes: 1/0 (1)
function old new delta
data_gz 10640 10641 +1
arm: (for 733/733 boards) all -0.0 rodata -0.0
uniphier_v7 : all -1 rodata -1
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-1 (-1)
function old new delta
data_gz 11919 11918 -1
opos6uldev : all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 18778 18775 -3
uniphier_ld4_sld8: all -3 rodata -3
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-3 (-3)
function old new delta
data_gz 11276 11273 -3
stemmy : all -20 rodata -20
u-boot: add: 0/0, grow: 0/-1 bytes: 0/-20 (-20)
function old new delta
data_gz 15783 15763 -20
As far as I could tell this data_gz is an automatically generated array
when CONFIG_CMD_CONFIG is enabled. It is the compressed .config stored
in binary form. Because I'm changing the name of symbols, replacing a
menu with a menuconfig, additional text makes it to .config and the
"# Networking" section in .config disappears.
Here is the diff for the 5 defconfigs listed above, generated with:
for f in build/*-m; do
diff --unified=0 $f/.config $(dirname $f)/$(basename -a -s '-m' $f)/.config
done
(-m is the build directory for master, and without the suffix, it's the
top commit of this series)
"""
--- build/opos6uldev-m/.config 2026-04-20 10:53:49.804528526 +0200
+++ build/opos6uldev/.config 2026-04-20 11:03:37.430242767 +0200
@@ -970,4 +969,0 @@
-
-#
-# Networking
-#
@@ -975,0 +972 @@
+CONFIG_NET_LEGACY=y
--- build/stemmy-m/.config 2026-04-20 11:01:33.653698123 +0200
+++ build/stemmy/.config 2026-04-20 11:04:53.452577311 +0200
@@ -733,4 +732,0 @@
-
-#
-# Networking
-#
@@ -738,2 +733,0 @@
-# CONFIG_NET is not set
-# CONFIG_NET_LWIP is not set
--- build/uniphier_ld4_sld8-m/.config 2026-04-20 11:00:41.605469071 +0200
+++ build/uniphier_ld4_sld8/.config 2026-04-20 11:04:22.226439899 +0200
@@ -997,4 +996,0 @@
-
-#
-# Networking
-#
@@ -1002,0 +999 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v7-m/.config 2026-04-20 10:53:04.019307319 +0200
+++ build/uniphier_v7/.config 2026-04-20 11:03:01.688085486 +0200
@@ -1004,4 +1003,0 @@
-
-#
-# Networking
-#
@@ -1009,0 +1006 @@
+CONFIG_NET_LEGACY=y
--- build/uniphier_v8-m/.config 2026-04-20 10:43:05.614441175 +0200
+++ build/uniphier_v8/.config 2026-04-20 10:41:03.214852130 +0200
@@ -875,4 +874,0 @@
-
-#
-# Networking
-#
@@ -880,0 +877 @@
+CONFIG_NET_LEGACY=y
"""
This is fine:
- Networking menu doesn't exist anymore so "#\n# Networking\n#\n" won't
be in .config anymore.
- opos6uldev, uniphier_ld4_sld8, uniphier_v7 and uniphier_v8 all have
(old) CONFIG_NET enabled, (new) CONFIG_NET will still be set but
CONFIG_NET_LEGACY also needs to be defined now to reflect the stack
choice (even if default),
- stemmy has CONFIG_NO_NET set, which means CONFIG_NET and
CONFIG_NET_LWIP are not reachable anymore hence why they don't need to
be part of .config,
GitLab CI was run on this series (well, not exactly, but it's only
changes to the git logs that were made):
https://source.denx.de/u-boot/contributors/qschulz/u-boot/-/pipelines/29849
It passes.
Link: https://lore.kernel.org/r/20260420-net-kconfig-v1-0-9900002d8e72@cherry.de
Since the move to make NET a menuconfig and NO_NET a synonym of NET=n,
when NET is enabled, NET_LEGACY || NET_LWIP is necessarily true, so
let's simplify the various checks across the codebase.
SPL_NET_LWIP doesn't exist but SPL_NET_LEGACY is an alias for SPL_NET so
the proper symbol is still defined in SPL whenever needed.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Highlight that NET really is the legacy networking stack by renaming the
option to NET_LEGACY.
This requires us to add an SPL_NET_LEGACY alias to SPL_NET as otherwise
CONFIG_IS_ENABLED(NET_LEGACY) will not work for SPL.
The "depends on !NET_LWIP" for SPL_NET clearly highlights that it is
using the legacy networking app so this seems fine to do.
This also has the benefit of removing potential confusion on NET being a
specific networking stack instead of "any" network stack.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Raymond Mao <raymond.mao@linaro.org> says:
The series include refactoring on bloblist and fdtdec to support handoff
of multiple DT overlays and applying them into the DT base during setup.
All changes are aligned to the spec update for supporting DT overlay
handoff[1].
Notes for testing:
Currently DT overlay is not yet enabled in TF-A, but with the test
patches I provided for TF-A and OP-TEE build, importing a DT overlay
blob file from QEMU to TF-A reserved memory is supported.
Follow below instructions to build and run for test:
$ repo init -u https://github.com/OP-TEE/manifest.git -m qemu_v8.xml
Replace your local qemu_v8.xml with [2], which contains all necessary
changes in both TF-A and OP-TEE build.
$ repo sync
$ cd build
$ make toolchains
$ make ARM_FIRMWARE_HANDOFF=y all
Copy and rename your DT overlay blob as 'qemu_v8.dtb' into out/bin
$ make ARM_FIRMWARE_HANDOFF=y run-only
[1] Add Transfer Entry for Devicetree Overlay
https://github.com/FirmwareHandoff/firmware_handoff/pull/74
[2] https://github.com/raymo200915/optee_manifest/blob/dt_overlay_handoff/qemu_v8.xml
Link: https://lore.kernel.org/r/20250718141621.3147633-1-raymond.mao@linaro.org
Add an API to search for the blobs with specified tag and use the
hook function to apply the blob data.
Add a helper function to return the inline header size as according
to recent spec[1] updates, the actual data can be following an inline
header instead of following the TE header immediately.
[1] Firmware Handoff spec:
https://github.com/FirmwareHandoff/firmware_handoff
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Michal Simek <michal.simek@amd.com>
OP-TEE message UID check API can be useful to know whether OP-TEE
is enabled on not assuming the corresponding SMC call is properly
handled if OP-TEE is not supported.
This API can be used by platform code to know OP-TEE presence and
on that basis OP-TEE DT node can be added as part of DT fixups for
the OP-TEE driver probe to happen for both U-Boot and Linux.
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20260127062341.723966-2-sumit.garg@kernel.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Enable the AMD Versal Gen 2 DW PCIe host controller and NVMe storage
in the virtual platform defconfig:
- CONFIG_PCI / CONFIG_CMD_PCI: core PCI stack and pci command
- CONFIG_PCIE_DW_AMD: AMD Versal Gen 2 PCIe host driver
- CONFIG_NVME_PCI: NVMe-over-PCIe storage driver
- CONFIG_CMD_LSBLK: block device listing command
- CONFIG_DM_PCA953X: GPIO expander driver for PERST# control
Add BOOT_TARGET_DEVICES_NVME to amd_versal2.h so NVMe is included
in the distro boot target list when CONFIG_NVME is enabled.
Signed-off-by: Pranav Sanwal <pranav.sanwal@amd.com>
Link: https://lore.kernel.org/r/20260327121015.996806-4-pranav.sanwal@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Add a common helper console_flush_stdin() to drain all pending
characters from stdin. This consolidates the open-coded
while (tstc()) getchar() pattern that appeared in multiple places
across the tree.
Signed-off-by: Gregor Herburger <gregor.herburger@linutronix.de>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add probe_ram_size_by_alias() to detect RAM size by checking whether a
write to one address aliases to another address.
Compared to get_ram_size(), this function allows the caller to:
- limit probing to a small set of required accesses
- avoid touching reserved or already used memory regions
- handle non-linear alias patterns
On the iMX95 SoC, when used with LPDDR5, accesses beyond the end of an 8GB DDR
configuration do not alias to the expected linear wrap-around addresses.
Instead, the aliased addresses appear to follow a pattern related to the
DDRC bank and bank-group addresses mapping. Experimentally, the observed
pattern is:
Write Read
y00000000 -> x0001c000
y00004000 -> x00018000
y00008000 -> x00014000
y0000c000 -> x00010000
y00010000 -> x0000c000
y00014000 -> x00008000
y00018000 -> x00004000
y0001c000 -> x00000000
This helper makes it possible to probe RAM size by explicitly specifying
the probed address and the expected alias address for each size check.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The TQMa7x is a SoM family with a pluggable board connector based on the
i.MX7 SoCs. Add support for the SoM and its combination with our
MBa7x carrier board.
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
Casey Connolly <casey.connolly@linaro.org> says:
This series implements various improvements to Linux header
compatibility, largely in preparation for a full port of Linux CCF but
many of these changes would also be helpful when porting other drivers.
Beside the basic header/compat stuff there are a few larger patches:
Patch 1 adds the "%pOF" format specifier to vsprintf, this behaves the
same as it does in Linux printing the name of the ofnode, but notably it
expects an ofnode pointer rather than a device_node.
Patch 2 adds an option to skip doing a full DM scan pre-relocation.
Some platforms like Qualcomm don't actually need devices to be probed
prior to relocation, it is also quite slow to scan the entire FDT before
caches are up. This option gets us to main loop 30-50% faster.
Unfortunately it isn't possible to totally skip DM since U-Boot will
panic if it can't find a serial port, but the serial uclass code will
bind the serial port itself by reading /chosen/stdout-path, however any
dependencies like clocks won't be found so this should only be enabled
if the serial driver gracefully handles missing clocks.
Patch 3 adds [k]strdup_const(), this works the same as the Linux version
saving a small amount of memory by avoiding duplicating strings stored
in .rodata, this is particularly useful for CCF.
Patch 4 adds 64-bit versions of some 32-bit ofnode utilities functions,
making it possible to parse 64-bit arrays.
Patch 6 provides a simple implementation of kref, this will be used
by CCF.
Patch 9 adds devm_krealloc() support to devres, it relies on storing
allocation sizes in the devres struct which will add a small overhead.
Link: https://lore.kernel.org/r/20260401-casey-ccf-compat-v2-0-414d5b7f040b@linaro.org
This is a simple wrapper around set/clear bits used by drivers in Linux.
Add it here so it can be used by Qualcomm CCF clk drivers.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Add a symlink to the Linux regmap.h path so that drivers ported from
Linux don't all need additional changes to include the U-Boot specific
path.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
This is a very basic port of Linux' kref, we don't actually need atomics
so we just use a simple counter. This is used by CCF to free unused
clocks.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
These are similar to their Linux counterparts, adding helpers
for reading arrays of 64-bit values with of_access and fdtdec
implementations.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Extend Linux compat by adding kstrdup_const(), backed by lib/string.c.
This leverages U-Boots .rodata section on ARM64 to avoid pointlessly
duplicating const strings.
This is used by the Linux CCF_FULL port and may be useful elsewhere
in U-Boot.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
