After applying the following patch, wget test on sandbox failed[1].
Commit: cab7867cff ("net: wget: Support retransmission a dropped packet")
Here are two reasons why the test is failed and how to fix it:
1. tcp_ack is calculated by the wrong value.
tcp_ack needs to be calculated by the received TCP payload size.
2. wget command may have a problem that HTTP response from server
must be divided into more than two packets.
In this commit, HTTP response is divided into two packets.
In addition, I fixed the HTTP response returned at the correct timing.
[1] https://lore.kernel.org/u-boot/CAFLszThEbk2Jr8OZ6Hj21wPSnJjgJhaDe037RqwHvwt1KjB3_A@mail.gmail.com/
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
Reported-by: Simon Glass <sjg@chromium.org>
Enable this so that the tests run.
Fix a few warnings in the code so that CI passes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
CONFIG_LED_BLINK and CONFIG_LED_SW_BLINK can be defined independently.
Led blinking works if any (or both) of them is enabled. Unfortunately
the led command help does not display blinking option if only
CONFIG_LED_SW_BLINK is enabled. This is definitely wrong.
This patch fix an issue.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Alexander Dahl <ada@thorsis.com>
Some boards don't have chipselect lines for leds so cs-gpios is not
specified in the dts leading to probing error. Fix it by making
behavior similar to the one in Linux, parse num-chipselects and
if it is zero, ignore cs-gpios.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
The patch fix a missprint introduced in commit 2e9fe73a88 ("spi: soft_spi:
Support the recommended soft spi properties").
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
i2c DM updates for v2024.10 next
- Add series from Simon, which removes old content in i2c.h
so that we can move towards having just the dm API.
It does not remove any boards, but instead removes functionality.
Now that this is always 1, remove it and the associated dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Now that this is always 0, remove it and the associated dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These functions are 11 years old and are only used by one board. Drop
them.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Only one board uses this option and it is very old. Let's drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
This is very old, predating even the legacy I2C support, so drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
This is very old, predating even the legacy I2C support, so drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Drop some old code from the mxc_i2c and ddr/fsl drivers. This will allow
removal of very old common I2C code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Drop two generations of old code in this command. All boards should use
driver model for I2C from 2021.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
This option is very old and the migration deadline was years ago. Drop
it so that the I2C system can be simplified.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These boards use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
These boards use pre-driver model code and it is several years since the
migration deadline. Disable the 'date' command so that this old code can
be removed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
This is used by a few boards but we are years past the migration date,
so let's drop it now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
This is only used by devkit3250 which is being removed. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Simon Glass <sjg@chromium.org> says:
Universal Payload (UPL) is an Industry Standard for firmware
components[1]. UPL is designed to improve interoperability within the
firmware industry, allowing mixing and matching of projects with less
friction and fewer project-specific implementations. UPL is
cross-platform, supporting ARM, x86 and RISC-V initially.
This series provides some initial support for this, targeting 0.9.1 and
sandbox only.
Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests
Now that sandbox_vpl supports UPL, add a test that checks that the
payload can be loaded by SPL and the handoff information passed through
to U-Boot proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add support for loading a UPL image from SPL. This uses the simple FIT
implementation, but also loads the full FIT just to permit more testing.
Signed-off-by: Simon Glass <sjg@chromium.org>
UPL significantly alters the boot flow for sandbox. Add a flag to enable
this so that it can be enabled only on tests which need it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the sandbox_vpl build to test UPL since it supports a real devicetree
in SPL. The sandbox_spl build uses OF_PLATDATA.
Enable writing the UPL handoff in SPL and reading it in U-Boot proper.
Provide a test to check that this handoff works.
Note that the test uses the standard devicetree rather than the test one,
since it is a lot smaller and fits in the existing bloblist.
Signed-off-by: Simon Glass <sjg@chromium.org>
Specify the FIT and include information about each loaded image, as
required by the UPL handoff.
Write the UPL handoff into the bloblist before jumping to the next phase.
Control this using a runtime flag to avoid conflicting with other
handoff mechanisms.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add the basic code to create a handoff structure in SPL, so it can be
passed to the next phase. For now this is not plumbed in.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a 'upl' command to work with Universal Payload features. For now it
only supports reading and writing a handoff structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Universal Payload provides a standard way of handing off control between
two firmware phases. Add support for writing the handoff information from
a structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Universal Payload provides a standard way of handing off control between
two firmware phases. Add support for reading the handoff information into
a structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is possible for U-Boot functions such as printf() to be called
within state_init(). This can end up checking gd->flags (e.g. in putc())
before global_data is set up.
Move the setup earlier to avoid this. This fixes the suppression of some
debug output in memory allocation (when enabled).
Signed-off-by: Simon Glass <sjg@chromium.org>
At present sandbox builds package up u-boot.bin in the .img file. This
cannot actually be executed, since it is not an ELF file.
For sandbox_vpl we want to be able to run the full boot flow.
Adjust the build rule for sandbox_vpl to package the ELF file and
thereby allow full testing of the sandbox transition from SPL to U-Boot
proper.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing API for these functions is different from the rest of
U-Boot, in that any error code must be obtained from the errno variable
on failure. This variable is part of the C library, so accessing it
outside of the special 'sandbox' shim-functions is not ideal.
Adjust the API to return an error code, to avoid this. Update existing
uses to check for any negative value, rather than just -1.
Signed-off-by: Simon Glass <sjg@chromium.org>
Since the removal of OF_HOSTFILE logic in board_fdt_blob_setup(), the
logic for obtaining the DT is handled in the OF_BOARD option. If a
devicetree comes from a bloblist it is immediately overwritten by this
function.
Fix this by skipping the function if a devicetree is already present.
This is sort-of a fix for e7fb7896 ("sandbox: Remove OF_HOSTFILE") but
it has only come to light since bloblist was added, so I have not added
a Fixes tag.
Unfortunately it is not possible to report the correct FDT source with
the current code. It might be best to use an error-return code for
board_fdt_blob_setup() so that an error can be reported if the board
does not provide the DT.
Signed-off-by: Simon Glass <sjg@chromium.org>
When the devicetree comes from a bloblist, it is currently overwritten
by the appended one, if present. It should be preserved.
Adjust the logic to support this.
Fixes: 70fe238594 ("fdt: Allow the devicetree to come from a bloblist")
Signed-off-by: Simon Glass <sjg@chromium.org>
This code is useful for loading an image in sandbox_spl so move it into
a place where it can be called as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
The argument array is not changed by the callee, so mark it const.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
