The MCHP_PIT64B_TIMER driver is not safe to compile on 64bit platforms
such as allyesconfig on a 64bit host. Tighten the dependencies here to
the platforms which use it today.
Acked-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver has never been enabled and currently has build problems
related in part to incorrect out_le32 calls. Remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
This series adds significant and valuable work by Mikhail Kshevetskiy to
align spi-mem with Linux 6.16. It also includes contributions to the mtd
performance patches, a work started by Miquel Raynal and improved by
Mikhail Kshevetskiy. Additionally, two patches tighten dependencies on
the Atmel driver.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/27873
During entropy evaluation, if the generated samples fail any statistical test,
then, all of the bits will be discarded, and a second set of samples will be
generated and tested.
Double the ent_delay to give more chance to pass before performing retry.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The function cv1800b_set_tap_delay is only called by
cv1800b_execute_tuning. The latter is where we currently have the #if
guard around MMC_SUPPORTS_TUNING, and so with the option disabled we
have an unused function warning. Move the guard to cover both functions.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In order to enable and build with SPL_REGULATOR_PWM we need to have both
SPL_DM_REGULATOR and SPL_DM_PWM enabled. Build-wise, we can have SPL
have PWM regulator support without enabling it in U-Boot itself so drop
that dependency.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
When xPL_MMC_WRITE is set but also xPL_MMC_TINY is set, the function
sd_read_ssr may be unused. Guard it appropriately.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Convert device tree property parsing to use dev_read_u32(), which
handles endianness and simplifies the code.
Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
Misc update on firmware scmi:
- Typo fix
- Use io helpers
- Use PAGE_SIZE for arm64
- Add IN_USE error code
- Add more error info
- Support scmi max rx timeout in mailbox
- Add myself as scmi maintainer, AKASHI contributed most code, but
seems he is not invovled in the developement anymore, I volunteer to
help here.
Some items on list that I am thinking to add:
- align with linux kernel to use cpu_to_le32 and le32_to_cpu, but have not find
a good way to use the helpers.
- Add SCMI version negotiation as Linux Kernel
Link: https://lore.kernel.org/r/20250927-scmi-v1-0-5e9354fb3bff@nxp.com
Use dev_dbg to dump device name, dev_dbg also a encapsulation call
to log() and print(). So it is ok to use dev_dbg.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Per devicetree bindings:
arm,max-rx-timeout-ms indicates an optional time value, expressed in
milliseconds, representing the transport maximum timeout value for the
receive channel. The value should be a non-zero value if set.
Support this property if platform set it to a non-default value. This
property is a per SCMI property, so all channels share same value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
In SCMI spec 3.2, there is an update:
Add IN_USE error code for usage with Pin control protocol
So add the error decoding for IN_USE.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
"Buffer too small" is too vague, dump more info to make it easier to
debug issues.
Change dev_dbg to dev_err when buffer is too small.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
It is not good practice to directly use "hdr->x" to read/write the hdr,
because the SCMI buffer may not mapped as normal memory. Following Linux
Kernel, using ioread32/iowrite32/memcpy_[from,to]io for smt header read,
write.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The script based firmware loader does not use anything from the
fs_loader implementation. Separate it into its own library source
file and convert the mediatek PHY to use this separate code. This
should reduce the amount of code that is pulled in alongside the
firmware loader, as the FS loader is no longer included.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The way that the NAND driver under DM_NAND_ATMEL is probed is by the
dummy memory driver controlled by ATMEL_EBI. Rather than require that
for NAND to work both be enabled, make NAND select ATMEL_EBI and do not
prompt for ATMEL_EBI as it only triggers the probe for NAND.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
A large number of mtd drivers cannot build without access to some
platform specific header files. Express those requirements in Kconfig as
well.
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
UBI updates for 2025.10
- ubi fixes found by Andrew with Smatch
- mtd: ubi: Remove test that always fails
- fs: ubifs: Ensure buf is freed before return
- fs: ubifs: Need to check return for being an error pointer
-fs: ubifs: Fix and rework error handling in ubifs_finddir
- fix: limit copy size in ubispl found by Benedikt
- extend support for LED activity (use the LED activity also on ubi reads)
from Yegor
Both the ds24xxx and ds2502 have a family_supported array which is local
to the driver but was not marked as static. Mark this as static as both
best practice and to allow both to be built in "allyesconfig" for
example.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver implements timer_get_boot_us() which is global namespace and
can conflict with other implementations of the function for example in
"allyesconfig". Start by limiting this driver to platforms which use it.
Signed-off-by: Tom Rini <trini@konsulko.com>
In this case, the NPCM RNG driver also provides some of the functions
that are implemented in the generic LIB_RAND file, so only allow this to
be built when that is disabled. The exynos RNG driver depends on ARM
SMCCC calls and so cannot be built outside of that. Express these
requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver cannot build without access to some platform specific header
files. Express those requirements in Kconfig as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
The LED_STATUS functionality is part of the legacy LED framework. This
cannot be enabled at the same time as the new LED API is. Make the text
prompt be clear this is legacy and add a dependency on LED being
disabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
We have a large number of library symbols that should not be prompted
for by the user really but rather selected by the platform (or SoC) as
needed. To start with however, make these depend on !COMPILE_TEST.
Signed-off-by: Tom Rini <trini@konsulko.com>
Linux kernel .get_temp() callback reports values in millicelsius,
U-Boot currently reports them in celsius. Align the two and report
in millicelsius. Update drivers accordingly. Update callsites that
use thermal_get_temp() as well.
The 'temperature' command now reports temperature in millicelsius
as well, with additional accuracy. This changes command line ABI
slightly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: David Zang <davidzangcs@gmail.com>
[trini: Update test/cmd/temperature.c]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for R-Car Gen3/Gen4 and RZ/G2 thermal sensors.
Fuse readout support is present, including fallback trimming.
Example usage using the 'temperature' command on R-Car V4H Sparrow Hawk:
"
=> temperature list
| Device | Driver | Parent
| thermal-rcar-gen3-tsc.0 | thermal-rcar-gen3-tsc | thermal@e6198000
| thermal-rcar-gen3-tsc.1 | thermal-rcar-gen3-tsc | thermal@e6198000
| thermal-rcar-gen3-tsc.2 | thermal-rcar-gen3-tsc | thermal@e6198000
| thermal-rcar-gen3-tsc.3 | thermal-rcar-gen3-tsc | thermal@e6198000
=> for i in 0 1 2 3 ; do temperature get thermal-rcar-gen3-tsc.$i ; done
thermal-rcar-gen3-tsc.0: 56 C
thermal-rcar-gen3-tsc.1: 50 C
thermal-rcar-gen3-tsc.2: 48 C
thermal-rcar-gen3-tsc.3: 52 C
"
Ported from Linux 6.16-rc6 commit
9e1dc0360fcf ("thermal/drivers/rcar_gen3: Add support for R-Car V4H default trim values")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
All instances of the U_BOOT_DRIVER must use a unique name or they will
lead to link time failures due to name space conflicts when both are
present. In this case the driver was reusing the ti_bandgap name.
Signed-off-by: Tom Rini <trini@konsulko.com>
All instances of the U_BOOT_DRIVER must use a unique name or they will
lead to link time failures due to name space conflicts when both are
present. In this case the driver was reusing the msm name.
Signed-off-by: Tom Rini <trini@konsulko.com>
All instances of the U_BOOT_DRIVER must use a unique name or they will
lead to link time failures due to name space conflicts when both are
present. In this case the driver was reusing the max313xx name.
Signed-off-by: Tom Rini <trini@konsulko.com>
All instances of the U_BOOT_DRIVER must use a unique name or they will
lead to link time failures due to name space conflicts when both are
present. In this case gpio-aspeed-g7 was using the same name as
gpio-aspeed.
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver has never been enabled by a platform since introduction and
does not currently compile. Remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
The fastmap VID header is embedded in struct ubi_scan_info. During fastmap
scan, the header is copied into struct ubi_scan_info, if valid. The former
code mixed up the amount of copied bytes and copied more bytes than
nessesary. This had no side effect, since the affected struct members are
uninitialized at that point and overwritten later.
Limit the copied bytes to the VID header size.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reported-by: Andrew Goodbody <andrew.goodbody@linaro.org>
When checking the VID header of a static volume there is an early test
for data_size == 0 so testing for that condition again is guaranteed to
fail. Just remove this piece of code.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <andrew.goodbody@linaro.org>
Use plain buffer pointer in request_firmware_into_buf_via_script()
instead of a pointer to pointer. The later is not necessary as the
request_firmware_into_buf_via_script() does not modify the buffer
pointer. Update the mediatek driver to match.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Continuous reading may result in multiple flash pages reading in one
operation. Unfortunately, not all spinand controllers support such
large reading. They will read less data. Unfortunately, the operation
can't be continued.
In this case:
* disable continuous reading on this (not good enough) spi controller
* repeat reading in regular mode.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Continuous reading may result in multiple flash pages reading in one
operation. Typically only one flash page has read/written (a little bit
more than 2-4 Kb), but continuous reading requires the spi controller
to read up to 512 Kb in one operation without toggling CS in beetween.
Roughly speaking spi controllers can be divided on 2 categories:
* spi controllers without dirmap acceleration support
* spi controllers with dirmap acceleration support
Firt of them will have issues with continuous reading if restriction on
the transfer length is implemented in the adjust_op_size() handler.
Second group often supports acceleration of single page only reading.
Thus enabling of continuous reading can break flash reading.
This patch tries to create dirmap for continuous reading first and
fallback to regular reading if spi controller refuses to create it.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Continuous mode is only supported for data reads, thus writing
requires only single flash page mapping.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
This makes the U-Boot SPI NAND driver almost the same as in Linux
6.17-rc1. The only major differences are:
* support of ECC engines. The Linux driver supports different ECC
engines while U-Boot uses on-die ECC only.
* per operation maximum SPI bus frequency
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
There is already a manufacturer hook, which is manufacturer specific but
not chip specific. We no longer have access to the actual NAND identity
at this stage so let's add a per-chip configuration hook to align the
chip configuration (if any) with the core's setting.
This is a port of linux commit
da55809ebb45 ("mtd: spinand: Add a ->configure_chip() hook")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Since commit 3d1f08b032dc ("mtd: spinand: Use the external ECC engine
logic") the spinand_write_page() function ignores the errors returned
by spinand_wait(). Change the code to propagate those up to the stack
as it was done before the offending change.
This is a port of linux commit
091d9e35b85b ("mtd: spinand: propagate spinand_wait() errors from spinand_write_page()")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Currently the best variant picked in the first one in the list provided
in the manufacturer driver. This worked well while all operations where
performed at the same speed, but with the introduction of DTR transfers
this no longer works correctly.
Let's continue iterating over all the alternatives, even if we find a
match, keeping a reference over the theoretically fastest
operation. Only at the end we can tell which variant is the best.
This logic happening only once at boot.
The patch is based on linux commit
666c299be696 (mtd: spinand: Enhance the logic when picking a variant)
created by Miquel Raynal <miquel.raynal@bootlin.com>
The code was a bit restricted in the functionality since not all
required functionality is supported in the u-boot.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
When the host ECC fails to correct the data error of NAND device,
there's a special read for data recovery method which can be setup
by the host for the next read. There are several retry levels that
can be attempted until the lost data is recovered or definitely
assumed lost.
This is the port of linux commit
f2cb43c98010 (mtd: spinand: Add read retry support)
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> # U-Boot port
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
