Fix build problems

Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
Patch by Andreas Engel, 19 Jul 2005

COPYING

@@ -1,3 +1,14 @@
+  NOTE! This copyright does *not* cover the so-called "standalone"
+applications that use U-Boot services by means of the jump table
+provided by U-Boot exactly for this purpose - this is merely
+considered normal use of U-Boot, and does *not* fall under the
+heading of "derived work". Also note that the GPL below is
+copyrighted by the Free Software Foundation, but the instance of code
+that it refers to (the U-Boot source code) is copyrighted by me and
+others who actually wrote it. -- Wolfgang Denk
+
+=======================================================================
+
 		    GNU GENERAL PUBLIC LICENSE
 		       Version 2, June 1991
 

CREDITS

@@ -40,6 +40,7 @@ D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
 D: Support for Zephyr Engineering ZPC.1900 board.
 D: Support for Interphase iSPAN boards.
 D: Support for Analogue&Micro Adder boards.
+D: Support for Analogue&Micro Rattler boards.
 W: http://www.arabellasw.com
 
 N: Jerry van Baren
@@ -197,10 +198,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
 W: www.denx.de
 
 N: Murray Jensen
-E: Murray.Jensen@cmst.csiro.au
+E: Murray.Jensen@csiro.au
 D: Initial 8260 support; GDB support
 D: Port to Cogent+Hymod boards; Hymod Board Database
-W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html
 
 N: Yoo. Jonghoon
 E: yooth@ipone.co.kr
@@ -223,6 +223,10 @@ N: Sangmoon Kim
 E: dogoil@etinsys.com
 D: Support for debris board
 
+N: Frederick W. Klatt
+E: fred.klatt@windriver.com
+D: Support for Wind River SBC8540/SBC8560 boards
+
 N: Thomas Koeller
 E: tkoeller@gmx.net
 D: Port to Motorola Sandpoint 3 (MPC8240)
@@ -249,6 +253,10 @@ E: team@leox.org
 D: Support for LEOX boards, DS164x RTC
 W: http://www.leox.org
 
+N: Leif Lindholm
+E: leif.lindholm@i3micro.com
+D: Support for AMD dbau1550 board.
+
 N: Stephan Linz
 E: linz@li-pro.net
 D: Support for Nios Stratix Development Kit (DK-1S10)
@@ -286,7 +294,10 @@ D: Support for Samsung ARM920T SMDK2410 eval board
 
 N: Scott McNutt
 E: smcnutt@psyent.com
-D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20)
+D: Support for Altera Nios-32 CPU
+D: Support for Altera Nios-II CPU
+D: Support for Nios Cyclone Development Kit (DK-1C20)
+W: http://www.psyent.com
 
 N: Rolf Offermanns
 E: rof@sysgo.de
@@ -322,7 +333,7 @@ D: BedBug embedded debugger code
 
 N: Daniel Poirot
 E: dan.poirot@windriver.com
-D: Support for the sbc8240 board
+D: Support for the Wind River sbc405, sbc8240 board
 W: http://www.windriver.com
 
 N: Stefan Roese
@@ -382,6 +393,10 @@ N: Rune Torgersen
 E: <runet@innovsys.com>
 D: Support for Motorola MPC8266ADS board
 
+N: Greg Ungerer
+E: greg.ungerer@opengear.com
+D: Support for ks8695 CPU, and OpenGear cmXXXX boards
+
 N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions
@@ -390,6 +405,10 @@ N: Christian Vejlbo
 E: christian.vejlbo@tellabs.com
 D: FADS860T ethernet support
 
+N: Robert Whaley
+E: rwhaley@applieddata.net
+D: Port to ARM PXA27x adsvix SBC
+
 N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board

MAINTAINERS

@@ -25,21 +25,23 @@ Pantelis Antoniou <panto@intracom.gr>
 
 	NETVIA			MPC8xx
 
+Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+	CPCI750			PPC750FX/GX
+
 Yuli Barcohen <yuli@arabellasw.com>
 
 	Adder			MPC87x/MPC852T
+	ep8248			MPC8248
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
+	Rattler			MPC8248
 	ZPC1900			MPC8265
 
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 
 	sacsng			MPC8260
 
-Rick Bronson <rick@efn.org>
-
-	AT91RM9200DK		at91rm9200
-
 Oliver Brown <obrown@adventnetworks.com>
 
 	gw8260			MPC8260
@@ -58,13 +60,14 @@ Torsten Demke <torsten.demke@fci.com>
 
 Wolfgang Denk <wd@denx.de>
 
+	IceCube_5100		MGT5100
+	IceCube_5200		MPC5200
+
 	AMX860			MPC860
 	ETX094			MPC850
 	FPS850L			MPC850
 	FPS860L			MPC860
 	ICU862			MPC862
-	IceCube_5100		MGT5100
-	IceCube_5200		MPC5200
 	IP860			MPC860
 	IVML24			MPC860
 	IVML24_128		MPC860
@@ -74,6 +77,7 @@ Wolfgang Denk <wd@denx.de>
 	IVMS8_256		MPC860
 	LANTEC			MPC850
 	LWMON			MPC823
+	NC650			MPC852
 	R360MPI			MPC823
 	RMU			MPC850
 	RRvision		MPC823
@@ -122,6 +126,34 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 	AmigaOneG3SE		MPC7xx
 
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+	ADCIOP			IOP480 (PPC401)
+	APC405			PPC405GP
+	AR405			PPC405GP
+	ASH405			PPC405EP
+	CANBT			PPC405CR
+	CPCI405			PPC405GP
+	CPCI4052		PPC405GP
+	CPCI405AB		PPC405GP
+	CPCI405DT		PPC405GP
+	CPCI440			PPC440GP
+	CPCIISER4		PPC405GP
+	DASA_SIM		IOP480 (PPC401)
+	DP405			PPC405EP
+	DU405			PPC405GP
+	G2000			PPC405EP
+	HH405			PPC405EP
+	HUB405			PPC405EP
+	OCRTC			PPC405GP
+	ORSG			PPC405GP
+	PCI405			PPC405GP
+	PLU405			PPC405EP
+	PMC405			PPC405GP
+	VOH405			PPC405EP
+	VOM405			PPC405EP
+	WUH405			PPC405EP
+
 Frank Gottschling <fgottschling@eltec.de>
 
 	MHPC			MPC8xx
@@ -141,16 +173,12 @@ Howard Gray <mvsensor@matrix-vision.de>
 
 	MVS1			MPC823
 
-Bill Hargen <Bill_Hargen@Jabil.com>
-
-	BUBINGA405EP		PPC405EP
-
 Klaus Heydeck <heydeck@kieback-peter.de>
 
 	KUP4K			MPC855
 	KUP4X			MPC859
 
-Murray Jensen <Murray.Jensen@cmst.csiro.au>
+Murray Jensen <Murray.Jensen@csiro.au>
 
 	cogent_mpc8xx		MPC8xx
 
@@ -165,10 +193,6 @@ Sangmoon Kim <dogoil@etinsys.com>
 
 	debris			MPC8245
 
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
 Thomas Lange <thomas@corelatus.se>
 
 	GTH			MPC860
@@ -177,6 +201,21 @@ The LEOX team <team@leox.org>
 
 	ELPT860			MPC860T
 
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+
 Eran Man <eran@nbase.co.il>
 
 	EVB64260_750CX		MPC750CX
@@ -190,11 +229,8 @@ Reinhard Meyer <r.meyer@emk-elektronik.de>
 	TOP860			MPC860T
 	TOP5200			MPC5200
 
-Scott McNutt <smcnutt@artesyncp.com>
-
-	EBONY			PPC440GP
-
 Tolunay Orkun <torkun@nextio.com>
+
 	csb272			PPC405GP
 	csb472			PPC405GP
 
@@ -207,37 +243,41 @@ Frank Panno <fpanno@delphintech.com>
 
 	ep8260			MPC8260
 
+Peter Pearse <peter.pearse@arm.com>
+
+	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
+	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
+	Versatile/AB		ARM926EJ-S
+	Versatile/PB		ARM926EJ-S
+
 Denis Peter <d.peter@mpl.ch>
 
 	MIP405			PPC4xx
 	PIP405			PPC4xx
 
-Stefan Roese <stefan.roese@esd-electronics.com>
+Daniel Poirot <dan.poirot@windriver.com>
 
-	ADCIOP			IOP480 (PPC401)
-	AR405			PPC405GP
-	ASH405			PPC405EP
-	CANBT			PPC405CR
-	CPCI405			PPC405GP
-	CPCI4052		PPC405GP
-	CPCI405AB		PPC405GP
-	CPCI440			PPC440GP
-	CPCIISER4		PPC405GP
-	DASA_SIM		IOP480 (PPC401)
-	DP405			PPC405EP
-	DU405			PPC405GP
-	HUB405			PPC405EP
-	OCRTC			PPC405GP
-	ORSG			PPC405GP
-	PCI405			PPC405GP
-	PLU405			PPC405EP
-	PMC405			PPC405GP
-	VOH405			PPC405EP
+	sbc8240			MPC8240
+	sbc405			PPC405GP
+
+Stefan Roese <sr@denx.de>
+
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245
 
 Travis Sawyer (travis.sawyer@sandburst.com>
 
 	XPEDITE1K		PPC440GX
-	OCOTEA			PPC440GX
 
 Peter De Schrijver <p2@mind.be>
 
@@ -270,15 +310,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -297,7 +328,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
@@ -314,6 +344,14 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
+Rick Bronson <rick@efn.org>
+
+	AT91RM9200DK		at91rm9200
+
 George G. Davis <gdavis@mvista.com>
 
 	assabet			SA1100
@@ -332,6 +370,11 @@ Marius Gr
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)
 
+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>
 
 	lubbock			xscale
@@ -343,25 +386,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2		ARM926EJS
 
-Rishi Bhattacharya <rishi@ti.com>
+Prakash Kumar <prakash@embedx.com>
 
-	omap5912osk		ARM926EJS
+	cerf250			xscale
 
 David Müller <d.mueller@elsoft.ch>
 
@@ -372,6 +403,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon			SA1100
 
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
@@ -379,7 +414,17 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 
 Andrea Scian <andrea.scian@dave-tech.it>
 
-	B2				ARM7TDMI (S3C44B0X)
+	B2			ARM7TDMI (S3C44B0X)
+
+Greg Ungerer <greg.ungerer@opengear.com>
+
+	cm4008			ks8695p
+	cm4116			ks8695p
+	cm4148			ks8695p
+
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS
 
 Alex Züpke <azu@sysgo.de>
 
@@ -428,6 +473,18 @@ Scott McNutt <smcnutt@psyent.com>
 
 	DK1C20			Nios-32
 
+#########################################################################
+# Nios-II Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Scott McNutt <smcnutt@psyent.com>
+
+	PCI5441			Nios-II
+	PK1C20			Nios-II
+
 #########################################################################
 # MicroBlaze Systems:							#
 #									#
@@ -439,6 +496,17 @@ Yasushi Shoji <yashi@atmark-techno.com>
 
 	SUZAKU			MicroBlaze
 
+#########################################################################
+# Coldfire Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+	TASREG			MCF5249
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################

MAKEALL

@@ -26,7 +26,7 @@ LIST_5xx="	\
 
 LIST_5xxx="	\
 	icecube_5100	icecube_5200	EVAL5200	PM520		\
-	Total5100	Total5200	Total5200_Rev2	TQM5200_AA	\
+	Total5100	Total5200	Total5200_Rev2	TQM5200_auto	\
 "
 
 #########################################################################
@@ -34,23 +34,25 @@ LIST_5xxx="	\
 #########################################################################
 
 LIST_8xx="	\
-	Adder87x	GENIETV		MBX860T		RBC823		\
-	AdderII		GTH		MHPC		rmu		\
-	ADS860		hermes		MPC86xADS	RPXClassic	\
-	AMX860		IAD210		MPC885ADS	RPXlite		\
-	c2mon		ICU862_100MHz	MVS1		RPXlite_DW	\
-	CCM		IP860		NETPHONE	RRvision	\
-	cogent_mpc8xx	IVML24		NETTA		SM850		\
-	ELPT860		IVML24_128	NETTA2		SPD823TS	\
-	ESTEEM192E	IVML24_256	NETTA_ISDN	svm_sc8xx	\
-	ETX094		IVMS8		NETVIA		SXNI855T	\
-	FADS823		IVMS8_128	NETVIA_V2	TOP860		\
-	FADS850SAR	IVMS8_256	NX823		TQM823L		\
-	FADS860T	KUP4K		pcu_e		TQM823L_LCD	\
-	FLAGADM		KUP4X		QS823		TQM850L		\
-	FPS850L		LANTEC		QS850		TQM855L		\
-	GEN860T		lwmon		QS860T		TQM860L		\
-	GEN860T_SC	MBX		R360MPI		v37		\
+	Adder87x	GENIETV		MBX860T		R360MPI		\
+	AdderII		GTH		MHPC		RBC823		\
+	ADS860		hermes		MPC86xADS	rmu		\
+	AMX860		IAD210		MPC885ADS	RPXClassic	\
+	c2mon		ICU862_100MHz	MVS1		RPXlite		\
+	CCM		IP860		NETPHONE	RPXlite_DW	\
+	cogent_mpc8xx	IVML24		NETTA		RRvision	\
+	ELPT860		IVML24_128	NETTA2		SM850		\
+	ESTEEM192E	IVML24_256	NETTA_ISDN	SPD823TS	\
+	ETX094		IVMS8		NETVIA		svm_sc8xx	\
+	FADS823		IVMS8_128	NETVIA_V2	SXNI855T	\
+	FADS850SAR	IVMS8_256	NX823		TOP860		\
+	FADS860T	KUP4K		pcu_e		TQM823L		\
+	FLAGADM		KUP4X		QS823		TQM823L_LCD	\
+	FPS850L		LANTEC		QS850		TQM850L		\
+	GEN860T		lwmon		QS860T		TQM855L		\
+	GEN860T_SC	MBX		quantum		TQM860L		\
+							uc100		\
+							v37		\
 "
 
 #########################################################################
@@ -58,16 +60,25 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	ADCIOP		AR405		ASH405		bubinga	        \
 	CANBT		CPCI405		CPCI4052	CPCI405AB	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
+	ebony		ERIC		EXBITGEN	HUB405		\
 	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
+	ml300		ocotea		OCRTC		ORSG		\
 	PCI405		PIP405		PLU405		PMC405		\
 	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	XPEDITE1K					\
+	walnut	        WUH405          XPEDITE1K	yellowstone     \
+	yosemite                                                        \
+"
+
+#########################################################################
+## MPC8220 Systems
+#########################################################################
+
+LIST_8220="	\
+	Alaska8220	Yukon8220					\
 "
 
 #########################################################################
@@ -76,9 +87,10 @@ LIST_4xx="	\
 
 LIST_824x="	\
 	A3000		BMW		CPC45		CU824		\
-	debris		eXalion		MOUSSE		MUSENKI		\
-	MVBLUE		OXC		PN62		Sandpoint8240	\
-	Sandpoint8245	SL8245		utx8245		sbc8240	\
+	debris		eXalion		HIDDEN_DRAGON	MOUSSE		\
+	MUSENKI		MVBLUE		OXC		PN62		\
+	Sandpoint8240	Sandpoint8245	SL8245		utx8245		\
+	sbc8240	\
 "
 
 #########################################################################
@@ -86,20 +98,32 @@ LIST_824x="	\
 #########################################################################
 
 LIST_8260="	\
-	atc		cogent_mpc8260	CPU86		ep8260		\
-	gw8260		hymod		IPHASE4539	ISPAN		\
-	MPC8260ADS	MPC8266ADS	MPC8272ADS	PM826		\
-	PM828		ppmc8260	PQ2FADS		RPXsuper	\
-	rsdproto	sacsng		sbc8260		SCM		\
-	TQM8260_AC	TQM8260_AD	TQM8260_AE	ZPC1900		\
+	atc		cogent_mpc8260	CPU86		CPU87		\
+	ep8248		ep8260		gw8260		hymod		\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
+	TQM8260_AE	ZPC1900						\
 "
 
+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="	\
+	MPC8349ADS	\
+"
+
+
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################
 
 LIST_85xx="	\
-	MPC8540ADS	MPC8560ADS	sbc8560		stxgp3		\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
 "
 
 #########################################################################
@@ -112,14 +136,15 @@ LIST_74xx="	\
 "
 
 LIST_7xx="	\
-	BAB7xx		ELPPC						\
+	BAB7xx		CPCI750		ELPPC				\
 "
 
-LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
-	  ${LIST_8xx}  \
-	  ${LIST_824x} ${LIST_8260} \
-	  ${LIST_85xx}	\
-	  ${LIST_4xx}		    \
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
+	  ${LIST_8xx}				\
+	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+	  ${LIST_83xx}				\
+	  ${LIST_85xx}				\
+	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"
 
 #########################################################################
@@ -139,34 +164,60 @@ LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
 #########################################################################
 
 LIST_ARM9="	\
-	at91rm9200dk	integratorcp	integratorap 	lpd7a400	\
-	mx1ads		mx1fs2		omap1510inn	omap1610h2	\
-	omap1610inn	omap730p2	scb9328		smdk2400	\
-	smdk2410	trab		VCMA9		versatile	\
+	at91rm9200dk	cmc_pu2		integratorcp	integratorap 	\
+	lpd7a400	mx1ads		mx1fs2		omap1510inn	\
+	omap1610h2	omap1610inn	omap730p2	scb9328		\
+	smdk2400	smdk2410	trab		VCMA9		\
+	versatile	voiceblue					\
 "
 
+#########################################################################
+## ARM11 Systems
+#########################################################################
+LIST_ARM11="omap2420h4"
+
 #########################################################################
 ## Xscale Systems
 #########################################################################
 
-LIST_pxa="cerf250 cradle csb226 innokom lubbock wepep250 xm250 xsengine"
+LIST_pxa="	\
+	adsvix		cerf250		cradle		csb226		\
+	innokom		lubbock		wepep250	xaeniax		\
+	xm250		xsengine							\
+"
 
 LIST_ixp="ixdp425"
 
 
-LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa} ${LIST_ixp}"
+LIST_arm="	\
+	${LIST_SA}							\
+	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM11}				\
+	${LIST_pxa} ${LIST_ixp}						\
+"
 
 #########################################################################
-## MIPS Systems
+## MIPS Systems		(default = big endian)
 #########################################################################
 
 LIST_mips4kc="incaip"
 
 LIST_mips5kc="purple"
 
-LIST_au1x00="dbau1000 dbau1100 dbau1500"
+LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
 
-LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1x00}"
+LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
+
+#########################################################################
+## MIPS Systems		(little endian)
+#########################################################################
+
+LIST_mips4kc_el=""
+
+LIST_mips5kc_el=""
+
+LIST_au1xx0_el="dbau1550_el"
+
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
 
 #########################################################################
 ## i386 Systems
@@ -187,6 +238,12 @@ LIST_nios="	\
 	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
 "
 
+#########################################################################
+## Nios-II Systems
+#########################################################################
+
+LIST_nios2="PCI5441 PK1C20"
+
 #########################################################################
 ## MicroBlaze Systems
 #########################################################################
@@ -215,11 +272,11 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|824x|8260|85xx|4xx|7xx|74xx| \
-	arm|SA|ARM7|ARM9|pxa|ixp| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
+	arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
 	microblaze| \
-	mips| \
-	nios| \
+	mips|mips_el| \
+	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do

Makefile

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2005
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -29,10 +29,10 @@ HOSTARCH := $(shell uname -m | \
 	    -e s/powerpc/ppc/ \
 	    -e s/macppc/ppc/)
 
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH
+export	HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -45,7 +45,7 @@ export	TOPDIR
 ifeq (include/config.mk,$(wildcard include/config.mk))
 # load ARCH, BOARD, and CPU configuration
 include include/config.mk
-export	ARCH CPU BOARD VENDOR
+export	ARCH CPU BOARD VENDOR SOC
 # load other configuration
 include $(TOPDIR)/config.mk
 
@@ -54,7 +54,7 @@ ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -72,6 +72,9 @@ endif
 ifeq ($(ARCH),nios)
 CROSS_COMPILE = nios-elf-
 endif
+ifeq ($(ARCH),nios2)
+CROSS_COMPILE = nios2-elf-
+endif
 ifeq ($(ARCH),m68k)
 CROSS_COMPILE = m68k-elf-
 endif
@@ -94,6 +97,9 @@ endif
 ifeq ($(CPU),ppc4xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
@@ -101,9 +107,12 @@ endif
 LIBS  = lib_generic/libgeneric.a
 LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
+ifdef SOC
+LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
+endif
 LIBS += lib_$(ARCH)/lib$(ARCH).a
 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
-	fs/reiserfs/libreiserfs.a
+	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
@@ -115,7 +124,7 @@ LIBS += common/libcommon.a
 .PHONY : $(LIBS)
 
 # Add GCC lib
-PLATFORM_LIBS += --no-warn-mismatch -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 
 
 # The "tools" are needed early, so put this first
@@ -133,6 +142,9 @@ ALL = u-boot.srec u-boot.bin System.map
 
 all:		$(ALL)
 
+u-boot.hex:	u-boot
+		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
+
 u-boot.srec:	u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
 
@@ -152,7 +164,7 @@ u-boot.dis:	u-boot
 u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
 		UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 		$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
-			--start-group $(LIBS) $(PLATFORM_LIBS) --end-group \
+			--start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
 			-Map u-boot.map -o u-boot
 
 $(LIBS):
@@ -176,6 +188,9 @@ tags:
 
 etags:
 		etags -a `find $(SUBDIRS) include \
+				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
+				fs/cramfs fs/fat fs/fdos fs/jffs2 \
+				net disk rtc dtt drivers drivers/sk98lin common \
 			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
 
 System.map:	u-boot
@@ -203,6 +218,9 @@ unconfig:
 ## MPC5xx Systems
 #########################################################################
 
+canmb_config:	unconfig
+	@./mkconfig -a canmb ppc mpc5xxx canmb
+
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi
 
@@ -212,6 +230,13 @@ PATI_config:		unconfig
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
+
+aev_config: unconfig
+	@./mkconfig -a aev ppc mpc5xxx tqm5200
+
+hmi1001_config:         unconfig
+	@./mkconfig hmi1001 ppc mpc5xxx hmi1001
+
 Lite5200_config				\
 Lite5200_LOWBOOT_config			\
 Lite5200_LOWBOOT08_config		\
@@ -249,6 +274,9 @@ icecube_5100_config:			unconfig
 		}
 	@./mkconfig -a IceCube ppc mpc5xxx icecube
 
+inka4x0_config:		unconfig
+	@./mkconfig inka4x0 ppc mpc5xxx inka4x0
+
 PM520_config \
 PM520_DDR_config \
 PM520_ROMBOOT_config \
@@ -298,6 +326,7 @@ Total5200_Rev2_lowboot_config:	unconfig
 		}
 	@./mkconfig -a Total5200 ppc mpc5xxx total5200
 
+TQM5200_auto_config		\
 TQM5200_AA_config	\
 TQM5200_AB_config	\
 TQM5200_AC_config	\
@@ -322,8 +351,17 @@ MiniFAP_config:	unconfig
 		  echo "... with 4 MB Flash, 128 MB SDRAM" ; \
 		  echo "... with Graphics Controller"; \
 		}
+	@[ -z "$(findstring auto,$@)" ] || \
+		{ echo "#define CONFIG_CS_AUTOCONF"	>>include/config.h ; \
+		  echo "... with automatic CS configuration" ; \
+		}
 	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
 
+spieval_config:	unconfig
+	echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+	echo "... with automatic CS configuration"
+	@./mkconfig -a spieval ppc mpc5xxx tqm5200
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -532,6 +570,9 @@ NETTA2_config:		unconfig
 		 }
 	@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
 
+NC650_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx nc650
+
 NX823_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx nx823
 
@@ -547,6 +588,9 @@ QS823_config:	unconfig
 QS860T_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
 
+quantum_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx quantum
+
 R360MPI_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
 
@@ -644,6 +688,9 @@ TTTech_config:	unconfig
 	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
 	@./mkconfig -a TQM823L ppc mpc8xx tqm8xx
 
+uc100_config	:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx uc100
+
 v37_config:	unconfig
 	@echo "#define CONFIG_LCD" >include/config.h
 	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
@@ -662,25 +709,42 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
 ADCIOP_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
 
+APC405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
+
 AR405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
 
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
 
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
 
-CATcenter_config:	unconfig
+CATcenter_config	\
+CATcenter_25_config	\
+CATcenter_33_config:	unconfig
 	@ echo "/* CATcenter uses PPChameleon Model ME */"  > include/config.h
 	@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
+	@[ -z "$(findstring _25,$@)" ] || \
+		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+		  echo "SysClk = 25MHz" ; \
+		}
+	@[ -z "$(findstring _33,$@)" ] || \
+		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+		  echo "SysClk = 33MHz" ; \
+		}
 	@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 
 CPCI405_config	\
 CPCI4052_config	\
+CPCI405DT_config	\
 CPCI405AB_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
 	@echo "BOARD_REVISION = $(@:_config=)"	>>include/config.mk
@@ -709,8 +773,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
 
 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -718,6 +782,12 @@ ERIC_config:	unconfig
 EXBITGEN_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
 
+G2000_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx g2000
+
+HH405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
+
 HUB405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
 
@@ -738,8 +808,8 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 
-OCOTEA_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
 
 OCRTC_config		\
 ORSG_config:	unconfig
@@ -765,41 +835,71 @@ PPChameleonEVB_BA_33_config	\
 PPChameleonEVB_ME_33_config	\
 PPChameleonEVB_HI_33_config:	unconfig
 	@ >include/config.h
-	@[ -z "$(findstring _MODEL_BA,$@)" ] || \
+	@[ -z "$(findstring EVB_BA,$@)" ] || \
 		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
 		  echo "... BASIC model" ; \
 		}
-	@[ -z "$(findstring _MODEL_ME,$@)" ] || \
+	@[ -z "$(findstring EVB_ME,$@)" ] || \
 		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
 		  echo "... MEDIUM model" ; \
 		}
-	@[ -z "$(findstring _MODEL_HI,$@)" ] || \
+	@[ -z "$(findstring EVB_HI,$@)" ] || \
 		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
 		  echo "... HIGH-END model" ; \
 		}
 	@[ -z "$(findstring _25,$@)" ] || \
 		{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
-		  echo " SysClk = 25MHz" ; \
+		  echo "SysClk = 25MHz" ; \
 		}
 	@[ -z "$(findstring _33,$@)" ] || \
 		{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
-		  echo " SysClk = 33MHz" ; \
+		  echo "SysClk = 33MHz" ; \
 		}
 	@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 
+sbc405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx sbc405
+
+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 
+VOM405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+
 W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
+
+WUH405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
 
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
+#########################################################################
+## MPC8220 Systems
+#########################################################################
+
+Alaska8220_config	\
+Yukon8220_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8220 alaska
+
+sorcery_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc8220 sorcery
+
 #########################################################################
 ## MPC824x Systems
 #########################################################################
@@ -833,6 +933,9 @@ debris_config: unconfig
 eXalion_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x eXalion
 
+HIDDEN_DRAGON_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+
 MOUSSE_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x mousse
 
@@ -863,6 +966,9 @@ SL8245_config: unconfig
 utx8245_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x utx8245
 
+cobra5272_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
 #########################################################################
 ## MPC8260 Systems
 #########################################################################
@@ -886,6 +992,23 @@ CPU86_ROMBOOT_config: unconfig
 	fi; \
 	echo "export CONFIG_BOOT_ROM" >> config.mk;
 
+CPU87_config	\
+CPU87_ROMBOOT_config: unconfig
+	@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
+	@cd ./include ;				\
+	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+		echo "... booting from 8-bit flash" ; \
+	else \
+		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+		echo "... booting from 64-bit flash" ; \
+	fi; \
+	echo "export CONFIG_BOOT_ROM" >> config.mk;
+
+ep8248_config	\
+ep8248E_config	:	unconfig
+	@./mkconfig ep8248 ppc mpc8260 ep8248
+
 ep8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ep8260
 
@@ -895,6 +1018,9 @@ gw8260_config:	unconfig
 hymod_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 hymod
 
+IDS8247_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 ids8247
+
 IPHASE4539_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
 
@@ -906,13 +1032,21 @@ ISPAN_REVB_config:	unconfig
 	@./mkconfig -a ISPAN ppc mpc8260 ispan
 
 MPC8260ADS_config	\
+MPC8260ADS_lowboot_config	\
 MPC8260ADS_33MHz_config	\
+MPC8260ADS_33MHz_lowboot_config	\
 MPC8260ADS_40MHz_config	\
+MPC8260ADS_40MHz_lowboot_config	\
 MPC8272ADS_config	\
+MPC8272ADS_lowboot_config	\
 PQ2FADS_config		\
+PQ2FADS_lowboot_config		\
 PQ2FADS-VR_config	\
+PQ2FADS-VR_lowboot_config	\
 PQ2FADS-ZU_config	\
+PQ2FADS-ZU_lowboot_config	\
 PQ2FADS-ZU_66MHz_config	\
+PQ2FADS-ZU_66MHz_lowboot_config	\
 	:		unconfig
 	$(if $(findstring PQ2FADS,$@), \
 	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
@@ -921,6 +1055,10 @@ PQ2FADS-ZU_66MHz_config	\
 	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
 	$(if $(findstring VR,$@), \
 	@echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+	@[ -z "$(findstring lowboot_,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+		  echo "... with lowboot configuration" ; \
+		}
 	@./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
 
 MPC8266ADS_config:	unconfig
@@ -980,6 +1118,12 @@ PM828_ROMBOOT_PCI_config:	unconfig
 ppmc8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
 
+Rattler8248_config	\
+Rattler_config:		unconfig
+	$(if $(findstring 8248,$@), \
+	@echo "#define CONFIG_MPC8248" > include/config.h)
+	@./mkconfig -a Rattler ppc mpc8260 rattler
+
 RPXsuper_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
 
@@ -1039,6 +1183,11 @@ TQM8265_AA_config:  unconfig
 	fi
 	@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
 
+VoVPN-GW_66MHz_config	\
+VoVPN-GW_100MHz_config:		unconfig
+	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
+	@./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+
 ZPC1900_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
 
@@ -1055,6 +1204,16 @@ M5272C3_config :		unconfig
 M5282EVB_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
 
+TASREG_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
@@ -1062,17 +1221,61 @@ M5282EVB_config :		unconfig
 MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
 
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config:      unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "... 33 MHz PCI" ; \
+	else \
+		echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+		echo -n "... 66 MHz PCI" ; \
+	fi ; \
+	if [ "$(findstring _slave_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+		echo " slave" ; \
+	else \
+		echo " host" ; \
+	fi
+	@./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
 MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
-stxgp3_config:		unconfig
-	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+MPC8541CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+
+MPC8548CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
+MPC8555CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
+
+PM854_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm854
+
+PM856_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm856
+
+sbc8540_config \
+sbc8540_33_config \
+sbc8540_66_config:	unconfig
+	@if [ "$(findstring _66_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_66"	>>include/config.h ; \
+		echo "... 66 MHz PCI" ; \
+	else \
+		>include/config.h ; \
+		echo "... 33 MHz PCI" ; \
+	fi
+	@./mkconfig -a SBC8540 ppc mpc85xx sbc8560
 
 sbc8560_config \
 sbc8560_33_config \
 sbc8560_66_config:      unconfig
 	@if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define CONFIG_PCI_66"  >>include/config.h ; \
+		echo "#define CONFIG_PCI_66"	>>include/config.h ; \
 		echo "... 66 MHz PCI" ; \
 	else \
 		>include/config.h ; \
@@ -1080,6 +1283,15 @@ sbc8560_66_config:      unconfig
 	fi
 	@./mkconfig -a sbc8560 ppc mpc85xx sbc8560
 
+stxgp3_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+
+TQM8540_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+
+TQM8560_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx tqm8560
+
 #########################################################################
 ## 74xx/7xx Systems
 #########################################################################
@@ -1090,6 +1302,9 @@ AmigaOneG3SE_config:	unconfig
 BAB7xx_config: unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
 
+CPCI750_config:        unconfig
+	@./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
+
 DB64360_config:  unconfig
 	@./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
 
@@ -1145,21 +1360,27 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$
 
 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
 
-integratorcp_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs integratorcp
+at91rm9200dk_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+
+cmc_pu2_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
 integratorap_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm926ejs integratorap
 
+integratorcp_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs integratorcp
+
 lpd7a400_config \
 lpd7a404_config:	unconfig
 	@./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
 
 mx1ads_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm920t mx1ads
+	@./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
 
 mx1fs2_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm920t mx1fs2
+	@./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
 
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn
@@ -1200,13 +1421,13 @@ omap730p2_cs3boot_config :	unconfig
 	@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
 
 scb9328_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm920t scb9328
+	@./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
 
 smdk2400_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm920t smdk2400
+	@./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
 
 smdk2410_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm920t smdk2410
+	@./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
 
 SX1_config :		unconfig
 	@./mkconfig $(@:_config=) arm arm925t sx1
@@ -1234,14 +1455,33 @@ trab_old_config:	unconfig
 		  echo "... with 8 MB Flash, 16 MB RAM" ; \
 		  echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
 		}
-	@./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
+	@./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
 
 VCMA9_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl
+	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
 
 versatile_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm926ejs versatile
 
+voiceblue_smallflash_config	\
+voiceblue_config:	unconfig
+	@if [ "$(findstring _smallflash_,$@)" ] ; then \
+		echo "... boot from lower flash bank" ; \
+		echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
+		echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+	else \
+		echo "... boot from upper flash bank" ; \
+		>include/config.h ; \
+		echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+	fi
+	@./mkconfig -a voiceblue arm arm925t voiceblue
+
+cm4008_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+
+cm41xx_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+
 #########################################################################
 ## S3C44B0 Systems
 #########################################################################
@@ -1265,17 +1505,13 @@ modnet50_config :	unconfig
 evb4510_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm720t evb4510
 
-#########################################################################
-## AT91RM9200 Systems
-#########################################################################
-
-at91rm9200dk_config	:	unconfig
-	@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
-
 #########################################################################
 ## XScale Systems
 #########################################################################
 
+adsvix_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa adsvix
+
 cerf250_config :	unconfig
 	@./mkconfig $(@:_config=) arm pxa cerf250
 
@@ -1300,12 +1536,21 @@ logodl_config	:	unconfig
 wepep250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa wepep250
 
+xaeniax_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa xaeniax
+
 xm250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa xm250
 
 xsengine_config :	unconfig
 	@./mkconfig $(@:_config=) arm pxa xsengine
 
+#########################################################################
+## ARM1136 Systems
+#########################################################################
+omap2420h4_config :    unconfig
+	@./mkconfig $(@:_config=) arm arm1136 omap2420h4
+
 #========================================================================
 # i386
 #========================================================================
@@ -1370,6 +1615,16 @@ dbau1500_config		: 	unconfig
 	@echo "#define CONFIG_DBAU1500 1" >>include/config.h
 	@./mkconfig -a dbau1x00 mips mips dbau1x00
 
+dbau1550_config		:	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
+	@./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1550_el_config	:	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
+	@./mkconfig -a dbau1x00 mips mips dbau1x00
+
 #########################################################################
 ## MIPS64 5Kc
 #########################################################################
@@ -1443,6 +1698,15 @@ ADNPESC1_config: unconfig
 		}
 	@./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
 
+#########################################################################
+## Nios-II
+#########################################################################
+
+PK1C20_config : unconfig
+	@./mkconfig  PK1C20 nios2 nios2 pk1c20 psyent
+
+PCI5441_config : unconfig
+	@./mkconfig  PCI5441 nios2 nios2 pci5441 psyent
 
 #========================================================================
 # MicroBlaze
@@ -1465,14 +1729,15 @@ clean:
 		| xargs rm -f
 	rm -f examples/hello_world examples/timer \
 	      examples/eepro100_eeprom examples/sched \
-	      examples/mem_to_mem_idma2intr examples/82559_eeprom
+	      examples/mem_to_mem_idma2intr examples/82559_eeprom \
+	      examples/test_burst
 	rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
-	rm -f tools/mpc86x_clk
+	rm -f tools/mpc86x_clk tools/ncb
 	rm -f tools/easylogo/easylogo tools/bmp_logo
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
-	rm -f board/trab/trab_fkt
+	rm -f board/trab/trab_fkt board/voiceblue/eeprom
 
 clobber:	clean
 	find . -type f \( -name .depend \
@@ -1481,7 +1746,7 @@ clobber:	clean
 		| xargs -0 rm -f
 	rm -f $(OBJS) *.bak tags TAGS
 	rm -fr *.*~
-	rm -f u-boot u-boot.map $(ALL)
+	rm -f u-boot u-boot.map u-boot.hex $(ALL)
 	rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
 	rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
 	rm -f include/asm/proc include/asm/arch include/asm

README

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000 - 2004
+# (C) Copyright 2000 - 2005
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -25,9 +25,10 @@ Summary:
 ========
 
 This directory contains the source code for U-Boot, a boot loader for
-Embedded boards based on PowerPC and ARM processors, which can be
-installed in a boot ROM and used to initialize and test the hardware
-or to download and run application code.
+Embedded boards based on PowerPC, ARM, MIPS and several other
+processors, which can be installed in a boot ROM and used to
+initialize and test the hardware or to download and run application
+code.
 
 The development of U-Boot is closely related to Linux: some parts of
 the source code originate in the Linux source tree, we have some
@@ -122,23 +123,28 @@ Directory Hierarchy:
 - board		Board dependent files
 - common	Misc architecture independent functions
 - cpu		CPU specific files
-  - 74xx_7xx	Files specific to Motorola MPC74xx and 7xx CPUs
+  - 74xx_7xx	Files specific to Freescale MPC74xx and 7xx CPUs
   - arm720t	Files specific to ARM 720 CPUs
   - arm920t	Files specific to ARM 920 CPUs
+    - at91rm9200 Files specific to Atmel AT91RM9200 CPU
+    - imx	Files specific to Freescale MC9328 i.MX CPUs
+    - s3c24x0	Files specific to Samsung S3C24X0 CPUs
   - arm925t	Files specific to ARM 925 CPUs
   - arm926ejs	Files specific to ARM 926 CPUs
-  - at91rm9200	Files specific to Atmel AT91RM9200 CPUs
+  - arm1136	Files specific to ARM 1136 CPUs
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
-  - mcf52x2	Files specific to Motorola ColdFire MCF52x2 CPUs
+  - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
   - mips	Files specific to MIPS CPUs
-  - mpc5xx	Files specific to Motorola MPC5xx  CPUs
-  - mpc5xxx	Files specific to Motorola MPC5xxx CPUs
-  - mpc8xx	Files specific to Motorola MPC8xx  CPUs
-  - mpc824x	Files specific to Motorola MPC824x CPUs
-  - mpc8260	Files specific to Motorola MPC8260 CPUs
-  - mpc85xx	Files specific to Motorola MPC85xx CPUs
+  - mpc5xx	Files specific to Freescale MPC5xx  CPUs
+  - mpc5xxx	Files specific to Freescale MPC5xxx CPUs
+  - mpc8xx	Files specific to Freescale MPC8xx  CPUs
+  - mpc8220	Files specific to Freescale MPC8220 CPUs
+  - mpc824x	Files specific to Freescale MPC824x CPUs
+  - mpc8260	Files specific to Freescale MPC8260 CPUs
+  - mpc85xx	Files specific to Freescale MPC85xx CPUs
   - nios	Files specific to Altera NIOS CPUs
+  - nios2	Files specific to Altera Nios-II CPUs
   - ppc4xx	Files specific to IBM PowerPC 4xx CPUs
   - pxa		Files specific to Intel XScale PXA CPUs
   - s3c44b0	Files specific to Samsung S3C44B0 CPUs
@@ -225,6 +231,7 @@ The following options need to be configured:
 		-------------------
 		CONFIG_MPC823,	CONFIG_MPC850,	CONFIG_MPC855,	CONFIG_MPC860
 	or	CONFIG_MPC5xx
+	or	CONFIG_MPC8220
 	or	CONFIG_MPC824X, CONFIG_MPC8260
 	or	CONFIG_MPC85xx
 	or	CONFIG_IOP480
@@ -244,6 +251,10 @@ The following options need to be configured:
 		----------------------
 		CONFIG_MICROBLAZE
 
+		Nios-2 based CPUs:
+		----------------------
+		CONFIG_NIOS2
+
 
 - Board Type:	Define exactly one of
 
@@ -276,34 +287,39 @@ The following options need to be configured:
 		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
 		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
 		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_ep8260		CONFIG_MPC8540EVAL	CONFIG_TQM850L
+		CONFIG_ERIC		CONFIG_MPC8560ADS	CONFIG_TQM855L
+		CONFIG_ESTEEM192E	CONFIG_MUSENKI		CONFIG_TQM860L
+		CONFIG_ETX094		CONFIG_MVS1		CONFIG_TTTech
+		CONFIG_EVB64260		CONFIG_NETPHONE		CONFIG_UTX8245
+		CONFIG_FADS823		CONFIG_NETTA		CONFIG_V37
+		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMC
+		CONFIG_FADS860T		CONFIG_NX823		CONFIG_W7OLMG
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_WALNUT
+		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZPC1900
+		CONFIG_FPS860L		CONFIG_OXC		CONFIG_ZUMA
 
 		ARM based boards:
 		-----------------
 
-		CONFIG_AT91RM9200DK,		CONFIG_CERF250,		CONFIG_DNP1110,
-		CONFIG_EP7312,			CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
-		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
-		CONFIG_LART,			CONFIG_LPD7A400		CONFIG_LUBBOCK,
-		CONFIG_OSK_OMAP5912,		CONFIG_SHANNON,		CONFIG_P2_OMAP730,
-		CONFIG_SMDK2400,		CONFIG_SMDK2410,	CONFIG_TRAB,
-		CONFIG_VCMA9
+		CONFIG_AT91RM9200DK,	CONFIG_CERF250,		CONFIG_DNP1110,
+		CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+		CONFIG_LART,		CONFIG_LPD7A400		CONFIG_LUBBOCK,
+		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,	CONFIG_SHANNON,
+		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,	CONFIG_SMDK2410,
+		CONFIG_TRAB,		CONFIG_VCMA9
 
 		MicroBlaze based boards:
 		------------------------
 
 		CONFIG_SUZAKU
 
+		Nios-2 based boards:
+		------------------------
+
+		CONFIG_PCI5441 CONFIG_PK1C20
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
@@ -339,16 +355,17 @@ The following options need to be configured:
 		CONFIG_MPC8240, CONFIG_MPC8245
 
 - 8xx CPU Options: (if using an MPC8xx cpu)
-		Define one or more of
-		CONFIG_8xx_GCLK_FREQ	- if get_gclk_freq() cannot work
+		CONFIG_8xx_GCLK_FREQ	- deprecated: CPU clock if
+					  get_gclk_freq() cannot work
 					  e.g. if there is no 32KHz
 					  reference PIT/RTC clock
+		CONFIG_8xx_OSCLK	- PLL input clock (either EXTCLK
+					  or XTAL/EXTAL)
 
-- 859/866 CPU options: (if using a MPC859 or MPC866 CPU):
-		CFG_866_OSCCLK
-		CFG_866_CPUCLK_MIN
-		CFG_866_CPUCLK_MAX
-		CFG_866_CPUCLK_DEFAULT
+- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
+		CFG_8xx_CPUCLK_MIN
+		CFG_8xx_CPUCLK_MAX
+		CONFIG_8xx_CPUCLK_DEFAULT
 			See doc/README.MPC866
 
 		CFG_MEASURE_CPUCLK
@@ -358,7 +375,7 @@ The following options need to be configured:
 		values. Mostly useful for board bringup to make sure
 		the PLL is locked at the intended frequency. Note
 		that this requires a (stable) reference clock (32 kHz
-		RTC clock),
+		RTC clock or CFG_8XX_XIN)
 
 - Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ
@@ -610,6 +627,7 @@ The following options need to be configured:
 		CFG_CMD_SAVES	* save S record dump
 		CFG_CMD_SCSI	* SCSI Support
 		CFG_CMD_SDRAM	* print SDRAM configuration information
+				  (requires CFG_CMD_I2C)
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
@@ -784,7 +802,7 @@ The following options need to be configured:
 		supported (PIP405, MIP405, MPC5200); define
 		CONFIG_USB_UHCI to enable it.
 		define CONFIG_USB_KEYBOARD to enable the USB Keyboard
-		end define CONFIG_USB_STORAGE to enable the USB
+		and define CONFIG_USB_STORAGE to enable the USB
 		storage devices.
 		Note:
 		Supported are USB Keyboards and USB Floppy drives
@@ -819,7 +837,7 @@ The following options need to be configured:
 		function struct part_info* jffs2_part_info(int part_num)
 
 		If you define only one JFFS2 partition you may also want to
-		#define CFG_JFFS_SINGLE_PART    1
+		#define CFG_JFFS_SINGLE_PART	1
 		to disable the command chpart. This is the default when you
 		have not defined a custom partition
 
@@ -1961,9 +1979,9 @@ Low Level (hardware related) configuration options:
 		source code. It is used to make hardware dependant
 		initializations.
 
-- CFG_IMMR:	Physical address of the Internal Memory Mapped
-		Register; DO NOT CHANGE! (11-4)
-		[MPC8xx systems only]
+- CFG_IMMR:	Physical address of the Internal Memory.
+		DO NOT CHANGE unless you know exactly what you're
+		doing! (11-4) [MPC8xx/82xx systems only]
 
 - CFG_INIT_RAM_ADDR:
 
@@ -2097,6 +2115,33 @@ Low Level (hardware related) configuration options:
 		Add the "loopw" memory command. This only takes effect if
 		the memory commands are activated globally (CFG_CMD_MEM).
 
+- CONFIG_MX_CYCLIC
+		Add the "mdc" and "mwc" memory commands. These are cyclic
+		"md/mw" commands.
+		Examples:
+
+		=> mdc.b 10 4 500
+		This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+		=> mwc.l 100 12345678 10
+		This command will write 12345678 to address 100 all 10 ms.
+
+		This only takes effect if the memory commands are activated
+		globally (CFG_CMD_MEM).
+
+- CONFIG_SKIP_LOWLEVEL_INIT
+- CONFIG_SKIP_RELOCATE_UBOOT
+
+		[ARM only] If these variables are defined, then
+		certain low level initializations (like setting up
+		the memory controller) are omitted and/or U-Boot does
+		not relocate itself into RAM.
+		Normally these variables MUST NOT be defined. The
+		only exception is when U-Boot is loaded (to RAM) by
+		some other boot loader or by a debugger which
+		performs these intializations itself.
+
+
 Building the Software:
 ======================
 
@@ -2126,6 +2171,7 @@ configurations; the following names are supported:
 
 	ADCIOP_config		FPS860L_config		omap730p2_config
 	ADS860_config		GEN860T_config		pcu_e_config
+	Alaska8220_config
 	AR405_config		GENIETV_config		PIP405_config
 	at91rm9200dk_config	GTH_config		QS823_config
 	CANBT_config		hermes_config		QS850_config
@@ -2140,13 +2186,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
-							WALNUT405_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
+	FADS823_config		NETVIA_config		TQM823L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
+				omap5912osk_config	walnut_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
@@ -3034,8 +3081,7 @@ Booting assumes that (the first part of) the image booted is a
 stage-2 loader which in turn loads and then invokes the kernel
 proper. Loader sources will eventually appear in the NetBSD source
 tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
-meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for
-details.
+meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz
 
 
 Implementation Internals:
@@ -3089,7 +3135,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in
@@ -3335,6 +3381,7 @@ Since the number of patches for U-Boot is growing, we need to
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.
 
+Patches shall be sent to the u-boot-users mailing list.
 
 When you send a patch, please include the following information with
 it:
@@ -3392,3 +3439,6 @@ Notes:
   (using #ifdef), and the resulting code with the new feature
   disabled must not need more memory than the old code without your
   modification.
+
+* Remember that there is a size limit of 40 kB per message on the
+  u-boot-users mailing list. Compression may help.