Fix build problems

Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
Patch by Andreas Engel, 19 Jul 2005

CHANGELOG

@@ -2,6 +2,621 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Minor code cleanup
+
+* Add forgotten new fils from latest VoiceBlue update
+
+* Make bootretry feature work with hush shell.
+  Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
+  Patch by Andreas Engel, 19 Jul 2005
+
+* Update Hymod Board Database PHP code in "tools" directory
+  Patch by Murray Jensen, 01 Jul 2005
+
+* Make "tr" command use POSIX compliant; export HOSTOS make variable
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Fix Murray Jensen's mail address.
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Preserve PHY_BMCR during a soft reset.
+  Patch by Carl Riechers, 24 Jun 2005
+
+* VoiceBlue update: eeprom tool can also store firmware version now.
+  eeprom.bin is runable by jumping at load address.
+  Patch by Ladislav Michl, 23 May 2005
+
+* Move the AT91RM9200DK to the ARM Systems list.
+  Patch by Anders Larsen, 26 Apr 2005
+
+* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
+  Patch by Anders Larsen, 26 Apr 2005
+
+* measure_gclk() is needed when DEBUG is enabled
+  Patch by Bryan O'Donoghue, 25 Apr 2005
+
+* Add UPD-Checksum code, fix problem in net.c (return instead of break)
+  Patch by Reinhard Arlt, 12 Aug 2005
+
+* esd PCI405 board updated
+  Patch by Matthias Fuchs, 28 Jul 2005
+
+* esd WUH405 and DU405 board updated
+  Patch by Matthias Fuchs, 27 Jul 2005
+
+* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
+  Patch by Matthias Fuchs, 4 May 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+  boards (baudrate, environment...). Flash driver fixed.
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+  Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+  Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+  with the 405 defines and the linux kernel defines.
+  Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
+* Add common (with Linux) MTD partition scheme and "mtdparts" command
+
+  Old, obsolete and duplicated code was cleaned up and replace by the
+  new partitioning method. There are two possible approaches now:
+
+  The first one is to define a single, static partition:
+
+  #undef CONFIG_JFFS2_CMDLINE
+  #define CONFIG_JFFS2_DEV               "nor0"
+  #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF	/* use whole device */
+  #define CONFIG_JFFS2_PART_SIZE         0x00100000	/* use 1MB */
+  #define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+  The second method uses the mtdparts command line option and dynamic
+  partitioning:
+
+  /* mtdparts command line support */
+  #define CONFIG_JFFS2_CMDLINE
+  #define MTDIDS_DEFAULT         "nor1=zuma-1,nor2=zuma-2"
+  #define MTDPARTS_DEFAULT       "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+
+  Command line of course produces bigger images, and may be inappropriate
+  for some targets, so by default it's off.
+
+* Fix build problems for PM856 Board
+
+* Fix sign extension bug in 'fpga loadb' command;
+  make 'fpga loadb' always print the file header info
+  Patch by Andrew Dyer, 11 Jan 2005
+
+* Fix errors that occur when accessing SystemACE CF
+  Patch by Jeff Angielski, 09 Jan 2005
+
+* Document switching between U-Boot and PlanetCore on RPXlite
+  by Sam Song, 24 Dec 2004
+
+* Fix PowerQUICC II mask detection.
+  Patch by Eugene Surovegin, 20 Dec 2004
+
+* Add support for Altera NIOS DK1C20 board
+  Patch by Shlomo Kut, 13 Dec 2004
+
+* Add support for ep8248 board
+  Patch by Yuli Barcohen, 12 Dec 2004
+
+  Minor code cleanup.
+
+* Fix baudrate setting for KGDB on MPC8260
+  Patch by HoJin, 11 Dec 2004
+
+* Fix 'mii help' text formatting
+  Patch by Cory Tusar, 10 Dec 2004
+
+* Fix return code of NFS command
+  Patch by Hiroshi Ito, 11 Dec 2004
+
+* Fix typo
+
+* Fix compiler warnings in cpu/ppc4xx/usbdev.c
+  Patch by Steven Blakeslee, 04 Aug 2005
+
+* Add support for AMCC Bamboo PPC440EP eval board
+  Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+  Fix style issues primarily in 85xx and 83xx boards.
+    - C++ comments
+    - Trailing white space
+    - Indentation not by TAB
+    - Excessive amount of empty lines
+    - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+    Add Xianghua Xiao and Lunsheng Wang's support for the
+    GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+  Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+  Move the TSEC driver out of cpu/mpc85xx as it will be shared
+  by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+  Implemented support for MPC8548CDS board.
+  Added DDR II support based on SPD values for MPC85xx boards.
+  This roll-up patch also includes bugfies for the previously
+  published patches:
+    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+  For MPC85xxCDS:
+    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+    for faster flash parts.
+    Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+  Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+  - Convert the CPM2 based functionality to use new CONFIG_CPM2
+    option rather than a myriad of CONFIG_MPC8560-like variants.
+    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
+    new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+  (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+  routed to the Watchdog handler
+  Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+  Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+  Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+  loopback test code
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+    for details.
+  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+    to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+  - Add support for AMCC PPC440EP/GR.
+  - Add support for AMCC Yosemite PPC440EP eval board.
+  - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+  - fix alignment of NAND size
+  - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+  The code is provided for, and was tested on, the Yukon/Alaska
+  and PM520 boards only.
+
+  A bug in flash_real_protect() for the Yukon board was fixed by
+  adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+  This fixes a problem of displaying bogus voltages when the voltages
+  are so low that the I2C devices start failing while the rest of the
+  system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+  Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+  Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+  "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+  U-Boot will automaticially find the end of the corresponding sector.
+
+* Patch by Stefan Roese, 5 Jul 2005:
+  Update uc100 board PHY setup
+
+* Patch by Stefan Roese, 1 Jul 2005:
+  Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+  Fix PHY addresses for PPChameleon and CATcenter boards
+  Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+  Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+  Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+  HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+  Initialize allocated dev and private hw structures
+  after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+  Fix byteorder problems with second argument of "bootm" with
+  standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+  Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+  (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+  those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+  - add support for the KS8695P (ARM 922 based) CPU
+  - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+  Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+  Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+  make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+  genereated HRESET pulse is too short to reset the external
+  circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+  (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+  size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+  March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+  added to support LZO and LZARI compression modes (undefined by
+  default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+  sections on PPChameleon board; other boards might use this, too.
+
+* Patch by Stefan Roese, 03 May 2005:
+  Update for P3G4
+  Fix problems in cmd_universe.c
+
+* Patch by Matthias Fuchs, 03 May 2005:
+  Added missing variable declaration in cmd_nand.c
+  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+
+* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+
+* Fix bug in the SDRAM initialization code for canmb, IceCube and
+  PM520 boards.
+  Fix PHY address for canmb board.
+
+* Cleanup serial console baudrate calculation on AT91RM9200;
+  get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+
+* Patch by Matthias Fuchs, 18 Apr 2005:
+  Make PCI target address spaces on PMC405 and CPCI405 boards
+  configurable via environment variables
+
+* Auto-size RAM on canmb board.
+
+* Add support for canmb board
+
+* Patch by Stefan Roese, 13 Apr 2005:
+  Update for esd apc405
+
+* Fixes for TQM8560 board:
+  - fix clock rates
+  - remove debug messages
+  - fix flash sector protection
+
+* Patch by Steven Scholz, 07 Apr 2005:
+  Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+
+* Patches by Steven Scholz, 07 Apr 2005:
+  Fix compiler warning in altera.c
+  Fix warning in cpu/arm920t/at91rm9200/i2c.c
+
+* Patch by Ladislav Michl, 06 Apr 2005:
+  Fix voiceblue configuration.
+
+* Patch by Stefan Roese, 06 Apr 2005:
+  Updates for OCOTEA board:
+  - Changed U-Boot size from 512kByte to 256kByte
+  - Fixed flash driver to support boot from soldered user flash
+  - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+  - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+    Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+  - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+  - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+  - update the pxa-regs.h file for PXA27x chips
+  - add PXA27x based ADSVIX board
+  - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+  Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+  Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+  Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+  Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+  Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+  Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+  (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+  Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+  - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+  - introduce two new configuration options instead:
+    CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+  Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+  reset timers so it's save to use udelay() in timeout code.
+
+* Patch by Mathias Küster, 23 Nov 2004:
+  add udelay support for the mcf5282 cpu
+
+* Patch by Tolunay Orkun, 16 November 2004:
+  fix incorrect onboard Xilinx CPLD base address
+
+* Patch by Jerry Van Baren, 08 Nov 2004:
+  - Add low-boot option for MPC8260ADS board (if lowboot is selected,
+    the jumper for the HRCW source should select flash. If lowboot is
+    not selected, the jumper for the HRCW source should select the
+    BCSR.
+  - change default load base address to 0x00400000
+
+* Patch by Yuli Barcohen, 08 Nov 2004:
+  Add support for Analogue & Micro Rattler boards.
+  Tested on Rattler8248.
+
+* Patch by Andre Renaud, 08 Nov 2004:
+  Fix watchdog support in common/lcd.c
+
+* Patch by Marc Leeman, 05 Nov 2003:
+  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
+  bug only affects the XPC8245 processors
+
+* Patches by Josef Wagner, 29 Oct 2004:
+  - Add support for MicroSys CPU87 board
+  - Add support for MicroSys PM854 board
+
+* Patch by Jian Zhang, 02 Nov 2004:
+  Add 16-bit NAND support
+
+* Patch by Scott McNutt, 01 Nov 2004:
+  Add missing NIOS/NIOS2 support for "iminfo" command
+
+* Patch by Detlev Zundel, 29 Oct 2004:
+  Add missing NIOS/NIOS2 support for "mkimage" tool.
+
+* Patch by David Adair, 27 Oct 2004:
+  Add missing 440GX SDRAM Controller reset
+
+* Patch by Steven Scholz, 25 Oct 2004:
+  Declare reset_cpu() in include/common.h instead locally
+
+* Patch by Yusdi Santoso, 22 Oct 2004:
+  - Add support for HIDDEN_DRAGON board
+  - fix endianess problem in driver/rtl1839.c
+
+* Patch by Allen Curtis, 21 Oct 2004:
+  support multiple serial ports
+
+* Patch by Richard Klingler, 03 Apr 2005:
+  Add call to eth_halt() in net/net.c when called functions fail
+  after eth_init() has been called.
+
+* Patch by Sam Song, 3 April 2005:
+  - Update README.Netconsole
+  - Update README
+
+* Prepare for SoC rework of ARM code:
+  - rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
+  - rename memsetup into lowlevel_init (function name and source files)
+  Patch by Steven Scholz, 03 Apr 2005:
+  - create SoC specific directories include/asm-arm/arch-imx and
+    include/asm-arm/arch-s3c24x0
+
+* Fix problems with SNTP support;
+  enable SNTP support in some boards.
+
+* Patches by Martin Krause, 01 Apr 2005:
+  - Fix flash erase timeout on CMC_PU2
+  - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+
+* Patch by Steven Scholz, 13 March 2005:
+  fix cache enabling for AT91RM9200
+
+* Patch by Masami Komiya, 30 Mar 2005:
+  add SNTP support and expand time server and time offset fields of
+  DHCP support. See doc/README.SNTP
+
+* Patch by Steven Scholz, 13 Dec 2004:
+  Fix bug in at91rm920 ethernet driver
+
+* Patch by Steven Scholz, 13 Dec 2004:
+  Remove duplicated code by merging memsetup.S files for
+  at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+
+* Patch by Detlev Zundel, 31 Mar 2005:
+  Cleanup duplicate definition of overwrite_console()
+
+* Update TQM5200 configuration;
+  prepare for Rev. 200 starter kit boards
+
+* Patch by Scott McNutt, 21 Oct 2004:
+  Add support for Nios-II EPCS Controller core.
+
+* Patch by Scott McNutt, 20 Oct 2004:
+  Nios-II cleanups:
+  - Add sysid command (Nios-II only).
+  - Locate default exception trampoline at proper offset.
+  - Implement I/O routines (readb, writeb, etc)
+  - Implement do_bootm_linux
+
+* Patches by Martin Krause, 22 Mar 2005:
+  - use TQM5200_auto as MAKEALL target for TQM5200 systems
+  - add support for SM501 graphics controller
+  - add support for graphic console on TQM5200
+  - add support for TQM5200 Rev 200
+  - cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Manfred Baral, 17 Mar 2005:
+  Fix typo
+
+* Fix RTC configuration for PPChameleon board
+
+* Cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Stefan Roese, 16 Mar 2005:
+  Update for esd auto_update and hh405 board
+
+* Adapt for U-Boot image size (new features enabled) on TQM5200
+
+* Update code for TQM8540 board (and 85xx in general):
+  - Change the name of the Ethernet driver: MOTO ENET -> ENET
+  - Reformat boot messages
+  - Enable redundant environment
+  - Replace the -O2 optimization flag with -mno-string
+
+* Patch by David Brownell, 10 Mar 2005:
+  Restore copyright statements in OHCI drivers.
+
+* Add support for TQM8540 board
+
+* Patch by Detlev Zundel, 14 Mar 2005:
+  NC650: changed NAND flash addressing to using UPMB
+
+* Patch by Stefan Roese, 14 Mar 2005:
+  Update for esd voh405 fpga image
+
+* INKA4x0: Allow initialization of LCD backlight dimming from
+  "brightness" environment variable.
+
+* Add port initialization for digital I/O on INKA4x0
+
+* Patch by Stefan Roese, 01 Mar 2005:
+  Update for esd boards dp405 and hub405
+
+* Fix get_partition_info() parameter error in all other calls
+  (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+
+* Enable USB and IDE support for INKA4x0 board
+
+* Patch by Andrew Dyer, 28 Feb 2005:
+  fix ext2load passing an incorrect pointer to get_partition_info()
+  resulting in load failure for devices other than 0
+
+* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+
+* Cleanup USB and partition defines
+
+* Add support for ext2 filesystems and image timestamps to TQM5200 board
+
+* Add reset code for Coral-P on INKA4x0 board
+
+* Patch by Martin Krause, 28 Jun 2004:
+  Update for TRAB board.
+
+* Fix some missing "volatile"s in MPC5xxx FEC driver
+
 * Fix cirrus voltage detection (for CPC45)
 
 * Fix byteorder problem in usbboot and scsiboot commands.

CREDITS

@@ -40,6 +40,7 @@ D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
 D: Support for Zephyr Engineering ZPC.1900 board.
 D: Support for Interphase iSPAN boards.
 D: Support for Analogue&Micro Adder boards.
+D: Support for Analogue&Micro Rattler boards.
 W: http://www.arabellasw.com
 
 N: Jerry van Baren
@@ -197,10 +198,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
 W: www.denx.de
 
 N: Murray Jensen
-E: Murray.Jensen@cmst.csiro.au
+E: Murray.Jensen@csiro.au
 D: Initial 8260 support; GDB support
 D: Port to Cogent+Hymod boards; Hymod Board Database
-W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html
 
 N: Yoo. Jonghoon
 E: yooth@ipone.co.kr
@@ -393,6 +393,10 @@ N: Rune Torgersen
 E: <runet@innovsys.com>
 D: Support for Motorola MPC8266ADS board
 
+N: Greg Ungerer
+E: greg.ungerer@opengear.com
+D: Support for ks8695 CPU, and OpenGear cmXXXX boards
+
 N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions
@@ -401,6 +405,10 @@ N: Christian Vejlbo
 E: christian.vejlbo@tellabs.com
 D: FADS860T ethernet support
 
+N: Robert Whaley
+E: rwhaley@applieddata.net
+D: Port to ARM PXA27x adsvix SBC
+
 N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board

MAINTAINERS

@@ -32,18 +32,16 @@ Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 Yuli Barcohen <yuli@arabellasw.com>
 
 	Adder			MPC87x/MPC852T
+	ep8248			MPC8248
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
+	Rattler			MPC8248
 	ZPC1900			MPC8265
 
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 
 	sacsng			MPC8260
 
-Rick Bronson <rick@efn.org>
-
-	AT91RM9200DK		at91rm9200
-
 Oliver Brown <obrown@adventnetworks.com>
 
 	gw8260			MPC8260
@@ -128,108 +126,7 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 	AmigaOneG3SE		MPC7xx
 
-Frank Gottschling <fgottschling@eltec.de>
-
-	MHPC			MPC8xx
-
-	BAB7xx			MPC740/MPC750
-
-Wolfgang Grandegger <wg@denx.de>
-
-	CCM			MPC855
-
-	PN62			MPC8240
-
-	IPHASE4539		MPC8260
-	SCM			MPC8260
-
-Howard Gray <mvsensor@matrix-vision.de>
-
-	MVS1			MPC823
-
-Bill Hargen <Bill_Hargen@Jabil.com>
-
-	BUBINGA405EP		PPC405EP
-
-Klaus Heydeck <heydeck@kieback-peter.de>
-
-	KUP4K			MPC855
-	KUP4X			MPC859
-
-Murray Jensen <Murray.Jensen@cmst.csiro.au>
-
-	cogent_mpc8xx		MPC8xx
-
-	cogent_mpc8260		MPC8260
-	hymod			MPC8260
-
-Brad Kemp <Brad.Kemp@seranoa.com>
-
-	ppmc8260		MPC8260
-
-Sangmoon Kim <dogoil@etinsys.com>
-
-	debris			MPC8245
-
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
-Thomas Lange <thomas@corelatus.se>
-
-	GTH			MPC860
-
-The LEOX team <team@leox.org>
-
-	ELPT860			MPC860T
-
-Eran Man <eran@nbase.co.il>
-
-	EVB64260_750CX		MPC750CX
-
-Andrea "llandre" Marson <andrea.marson@dave-tech.it>
-
-	PPChameleonEVB	PPC405EP
-
-Reinhard Meyer <r.meyer@emk-elektronik.de>
-
-	TOP860			MPC860T
-	TOP5200			MPC5200
-
-Scott McNutt <smcnutt@artesyncp.com>
-
-	EBONY			PPC440GP
-
-Tolunay Orkun <torkun@nextio.com>
-	csb272			PPC405GP
-	csb472			PPC405GP
-
-Keith Outwater <Keith_Outwater@mvis.com>
-
-	GEN860T			MPC860T
-	GEN860T_SC		MPC860T
-
-Frank Panno <fpanno@delphintech.com>
-
-	ep8260			MPC8260
-
-Peter Pearse <peter.pearse@arm.com>
-
-	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
-	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
-	Versatile/AB		ARM926EJ-S
-	Versatile/PB		ARM926EJ-S
-
-Denis Peter <d.peter@mpl.ch>
-
-	MIP405			PPC4xx
-	PIP405			PPC4xx
-
-Daniel Poirot <dan.poirot@windriver.com>
-	sbc8240			MPC8240
-	sbc405			PPC405GP
-
-Stefan Roese <stefan.roese@esd-electronics.com>
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 
 	ADCIOP			IOP480 (PPC401)
 	APC405			PPC405GP
@@ -257,10 +154,130 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 	VOM405			PPC405EP
 	WUH405			PPC405EP
 
+Frank Gottschling <fgottschling@eltec.de>
+
+	MHPC			MPC8xx
+
+	BAB7xx			MPC740/MPC750
+
+Wolfgang Grandegger <wg@denx.de>
+
+	CCM			MPC855
+
+	PN62			MPC8240
+
+	IPHASE4539		MPC8260
+	SCM			MPC8260
+
+Howard Gray <mvsensor@matrix-vision.de>
+
+	MVS1			MPC823
+
+Klaus Heydeck <heydeck@kieback-peter.de>
+
+	KUP4K			MPC855
+	KUP4X			MPC859
+
+Murray Jensen <Murray.Jensen@csiro.au>
+
+	cogent_mpc8xx		MPC8xx
+
+	cogent_mpc8260		MPC8260
+	hymod			MPC8260
+
+Brad Kemp <Brad.Kemp@seranoa.com>
+
+	ppmc8260		MPC8260
+
+Sangmoon Kim <dogoil@etinsys.com>
+
+	debris			MPC8245
+
+Thomas Lange <thomas@corelatus.se>
+
+	GTH			MPC860
+
+The LEOX team <team@leox.org>
+
+	ELPT860			MPC860T
+
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+
+Eran Man <eran@nbase.co.il>
+
+	EVB64260_750CX		MPC750CX
+
+Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+
+	PPChameleonEVB	PPC405EP
+
+Reinhard Meyer <r.meyer@emk-elektronik.de>
+
+	TOP860			MPC860T
+	TOP5200			MPC5200
+
+Tolunay Orkun <torkun@nextio.com>
+
+	csb272			PPC405GP
+	csb472			PPC405GP
+
+Keith Outwater <Keith_Outwater@mvis.com>
+
+	GEN860T			MPC860T
+	GEN860T_SC		MPC860T
+
+Frank Panno <fpanno@delphintech.com>
+
+	ep8260			MPC8260
+
+Peter Pearse <peter.pearse@arm.com>
+
+	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
+	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
+	Versatile/AB		ARM926EJ-S
+	Versatile/PB		ARM926EJ-S
+
+Denis Peter <d.peter@mpl.ch>
+
+	MIP405			PPC4xx
+	PIP405			PPC4xx
+
+Daniel Poirot <dan.poirot@windriver.com>
+
+	sbc8240			MPC8240
+	sbc405			PPC405GP
+
+Stefan Roese <sr@denx.de>
+
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245
+
 Travis Sawyer (travis.sawyer@sandburst.com>
 
 	XPEDITE1K		PPC440GX
-	OCOTEA			PPC440GX
 
 Peter De Schrijver <p2@mind.be>
 
@@ -293,15 +310,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -320,7 +328,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
@@ -337,6 +344,14 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
+Rick Bronson <rick@efn.org>
+
+	AT91RM9200DK		at91rm9200
+
 George G. Davis <gdavis@mvista.com>
 
 	assabet			SA1100
@@ -355,6 +370,11 @@ Marius Gr
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)
 
+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>
 
 	lubbock			xscale
@@ -366,29 +386,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2		ARM926EJS
 
-Rishi Bhattacharya <rishi@ti.com>
+Prakash Kumar <prakash@embedx.com>
 
-	omap5912osk		ARM926EJS
-
-Richard Woodruff <r-woodruff2@ti.com>
-
-	omap2420h4		ARM1136EJS
+	cerf250			xscale
 
 David Müller <d.mueller@elsoft.ch>
 
@@ -399,6 +403,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon			SA1100
 
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
@@ -406,7 +414,17 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 
 Andrea Scian <andrea.scian@dave-tech.it>
 
-	B2				ARM7TDMI (S3C44B0X)
+	B2			ARM7TDMI (S3C44B0X)
+
+Greg Ungerer <greg.ungerer@opengear.com>
+
+	cm4008			ks8695p
+	cm4116			ks8695p
+	cm4148			ks8695p
+
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS
 
 Alex Züpke <azu@sysgo.de>
 
@@ -485,7 +503,7 @@ Yasushi Shoji <yashi@atmark-techno.com>
 #	Board			CPU					#
 #########################################################################
 
-Stefan Roese <stefan.roese@esd-electronics.com>
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 
 	TASREG			MCF5249
 

MAKEALL

@@ -26,7 +26,7 @@ LIST_5xx="	\
 
 LIST_5xxx="	\
 	icecube_5100	icecube_5200	EVAL5200	PM520		\
-	Total5100	Total5200	Total5200_Rev2	TQM5200_AA	\
+	Total5100	Total5200	Total5200_Rev2	TQM5200_auto	\
 "
 
 #########################################################################
@@ -60,16 +60,17 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	ADCIOP		AR405		ASH405		bubinga	        \
 	CANBT		CPCI405		CPCI4052	CPCI405AB	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
+	ebony		ERIC		EXBITGEN	HUB405		\
 	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
+	ml300		ocotea		OCRTC		ORSG		\
 	PCI405		PIP405		PLU405		PMC405		\
 	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	WUH405          XPEDITE1K			\
+	walnut	        WUH405          XPEDITE1K	yellowstone     \
+	yosemite                                                        \
 "
 
 #########################################################################
@@ -86,9 +87,10 @@ LIST_8220="	\
 
 LIST_824x="	\
 	A3000		BMW		CPC45		CU824		\
-	debris		eXalion		MOUSSE		MUSENKI		\
-	MVBLUE		OXC		PN62		Sandpoint8240	\
-	Sandpoint8245	SL8245		utx8245		sbc8240	\
+	debris		eXalion		HIDDEN_DRAGON	MOUSSE		\
+	MUSENKI		MVBLUE		OXC		PN62		\
+	Sandpoint8240	Sandpoint8245	SL8245		utx8245		\
+	sbc8240	\
 "
 
 #########################################################################
@@ -96,21 +98,32 @@ LIST_824x="	\
 #########################################################################
 
 LIST_8260="	\
-	atc		cogent_mpc8260	CPU86		ep8260		\
-	gw8260		hymod		IPHASE4539	ISPAN		\
-	MPC8260ADS	MPC8266ADS	MPC8272ADS	PM826		\
-	PM828		ppmc8260	RPXsuper	rsdproto	\
-	sacsng		sbc8260		SCM		TQM8260_AC	\
-	TQM8260_AD	TQM8260_AE	ZPC1900				\
+	atc		cogent_mpc8260	CPU86		CPU87		\
+	ep8248		ep8260		gw8260		hymod		\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
+	TQM8260_AE	ZPC1900						\
 "
 
+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="	\
+	MPC8349ADS	\
+"
+
+
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################
 
 LIST_85xx="	\
-	MPC8540ADS	MPC8541CDS	MPC8555CDS	MPC8560ADS	\
-	sbc8540		sbc8560		stxgp3				\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
 "
 
 #########################################################################
@@ -126,11 +139,12 @@ LIST_7xx="	\
 	BAB7xx		CPCI750		ELPPC				\
 "
 
-LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
-	  ${LIST_8xx}  \
-	  ${LIST_824x} ${LIST_8260} \
-	  ${LIST_85xx}	\
-	  ${LIST_4xx}		    \
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
+	  ${LIST_8xx}				\
+	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+	  ${LIST_83xx}				\
+	  ${LIST_85xx}				\
+	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"
 
 #########################################################################
@@ -154,7 +168,7 @@ LIST_ARM9="	\
 	lpd7a400	mx1ads		mx1fs2		omap1510inn	\
 	omap1610h2	omap1610inn	omap730p2	scb9328		\
 	smdk2400	smdk2410	trab		VCMA9		\
-	versatile							\
+	versatile	voiceblue					\
 "
 
 #########################################################################
@@ -167,9 +181,9 @@ LIST_ARM11="omap2420h4"
 #########################################################################
 
 LIST_pxa="	\
-	cerf250		cradle		csb226		innokom		\
-	lubbock		wepep250	xaeniax		xm250		\
-	xsengine							\
+	adsvix		cerf250		cradle		csb226		\
+	innokom		lubbock		wepep250	xaeniax		\
+	xm250		xsengine							\
 "
 
 LIST_ixp="ixdp425"
@@ -182,7 +196,7 @@ LIST_arm="	\
 "
 
 #########################################################################
-## MIPS Systems
+## MIPS Systems		(default = big endian)
 #########################################################################
 
 LIST_mips4kc="incaip"
@@ -193,6 +207,18 @@ LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
 
 LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
 
+#########################################################################
+## MIPS Systems		(little endian)
+#########################################################################
+
+LIST_mips4kc_el=""
+
+LIST_mips5kc_el=""
+
+LIST_au1xx0_el="dbau1550_el"
+
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
+
 #########################################################################
 ## i386 Systems
 #########################################################################
@@ -246,10 +272,10 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
 	arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
 	microblaze| \
-	mips| \
+	mips|mips_el| \
 	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`

Makefile

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2005
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -29,10 +29,10 @@ HOSTARCH := $(shell uname -m | \
 	    -e s/powerpc/ppc/ \
 	    -e s/macppc/ppc/)
 
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH
+export	HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -54,7 +54,7 @@ ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -97,6 +97,9 @@ endif
 ifeq ($(CPU),ppc4xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
@@ -215,6 +218,9 @@ unconfig:
 ## MPC5xx Systems
 #########################################################################
 
+canmb_config:	unconfig
+	@./mkconfig -a canmb ppc mpc5xxx canmb
+
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi
 
@@ -224,6 +230,13 @@ PATI_config:		unconfig
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
+
+aev_config: unconfig
+	@./mkconfig -a aev ppc mpc5xxx tqm5200
+
+hmi1001_config:         unconfig
+	@./mkconfig hmi1001 ppc mpc5xxx hmi1001
+
 Lite5200_config				\
 Lite5200_LOWBOOT_config			\
 Lite5200_LOWBOOT08_config		\
@@ -344,6 +357,11 @@ MiniFAP_config:	unconfig
 		}
 	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
 
+spieval_config:	unconfig
+	echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+	echo "... with automatic CS configuration"
+	@./mkconfig -a spieval ppc mpc5xxx tqm5200
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -700,8 +718,11 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
 
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -752,8 +773,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
 
 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -787,8 +808,8 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 
-OCOTEA_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
 
 OCRTC_config		\
 ORSG_config:	unconfig
@@ -839,6 +860,10 @@ PPChameleonEVB_HI_33_config:	unconfig
 sbc405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx sbc405
 
+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -849,8 +874,8 @@ W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
 
 WUH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -858,14 +883,22 @@ WUH405_config:	unconfig
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
-Alaska8220_config:	unconfig
+
+Alaska8220_config	\
+Yukon8220_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 alaska
 
-Yukon8220_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8220 yukon
+sorcery_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc8220 sorcery
 
 #########################################################################
 ## MPC824x Systems
@@ -900,6 +933,9 @@ debris_config: unconfig
 eXalion_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x eXalion
 
+HIDDEN_DRAGON_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+
 MOUSSE_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x mousse
 
@@ -956,6 +992,23 @@ CPU86_ROMBOOT_config: unconfig
 	fi; \
 	echo "export CONFIG_BOOT_ROM" >> config.mk;
 
+CPU87_config	\
+CPU87_ROMBOOT_config: unconfig
+	@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
+	@cd ./include ;				\
+	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+		echo "... booting from 8-bit flash" ; \
+	else \
+		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+		echo "... booting from 64-bit flash" ; \
+	fi; \
+	echo "export CONFIG_BOOT_ROM" >> config.mk;
+
+ep8248_config	\
+ep8248E_config	:	unconfig
+	@./mkconfig ep8248 ppc mpc8260 ep8248
+
 ep8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ep8260
 
@@ -965,6 +1018,9 @@ gw8260_config:	unconfig
 hymod_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 hymod
 
+IDS8247_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 ids8247
+
 IPHASE4539_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
 
@@ -976,13 +1032,21 @@ ISPAN_REVB_config:	unconfig
 	@./mkconfig -a ISPAN ppc mpc8260 ispan
 
 MPC8260ADS_config	\
+MPC8260ADS_lowboot_config	\
 MPC8260ADS_33MHz_config	\
+MPC8260ADS_33MHz_lowboot_config	\
 MPC8260ADS_40MHz_config	\
+MPC8260ADS_40MHz_lowboot_config	\
 MPC8272ADS_config	\
+MPC8272ADS_lowboot_config	\
 PQ2FADS_config		\
+PQ2FADS_lowboot_config		\
 PQ2FADS-VR_config	\
+PQ2FADS-VR_lowboot_config	\
 PQ2FADS-ZU_config	\
+PQ2FADS-ZU_lowboot_config	\
 PQ2FADS-ZU_66MHz_config	\
+PQ2FADS-ZU_66MHz_lowboot_config	\
 	:		unconfig
 	$(if $(findstring PQ2FADS,$@), \
 	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
@@ -991,6 +1055,10 @@ PQ2FADS-ZU_66MHz_config	\
 	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
 	$(if $(findstring VR,$@), \
 	@echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+	@[ -z "$(findstring lowboot_,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+		  echo "... with lowboot configuration" ; \
+		}
 	@./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
 
 MPC8266ADS_config:	unconfig
@@ -1050,6 +1118,12 @@ PM828_ROMBOOT_PCI_config:	unconfig
 ppmc8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
 
+Rattler8248_config	\
+Rattler_config:		unconfig
+	$(if $(findstring 8248,$@), \
+	@echo "#define CONFIG_MPC8248" > include/config.h)
+	@./mkconfig -a Rattler ppc mpc8260 rattler
+
 RPXsuper_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
 
@@ -1109,6 +1183,11 @@ TQM8265_AA_config:  unconfig
 	fi
 	@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
 
+VoVPN-GW_66MHz_config	\
+VoVPN-GW_100MHz_config:		unconfig
+	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
+	@./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+
 ZPC1900_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
 
@@ -1128,6 +1207,13 @@ M5282EVB_config :		unconfig
 TASREG_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
 
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
@@ -1135,15 +1221,44 @@ TASREG_config :		unconfig
 MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
 
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config:      unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "... 33 MHz PCI" ; \
+	else \
+		echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+		echo -n "... 66 MHz PCI" ; \
+	fi ; \
+	if [ "$(findstring _slave_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+		echo " slave" ; \
+	else \
+		echo " host" ; \
+	fi
+	@./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
 MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
 MPC8541CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
 
+MPC8548CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
 MPC8555CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
 
+PM854_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm854
+
+PM856_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm856
+
 sbc8540_config \
 sbc8540_33_config \
 sbc8540_66_config:	unconfig
@@ -1171,6 +1286,12 @@ sbc8560_66_config:      unconfig
 stxgp3_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
 
+TQM8540_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+
+TQM8560_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx tqm8560
+
 #########################################################################
 ## 74xx/7xx Systems
 #########################################################################
@@ -1239,6 +1360,12 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$
 
 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
 
+at91rm9200dk_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+
+cmc_pu2_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+
 integratorap_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm926ejs integratorap
 
@@ -1336,6 +1463,25 @@ VCMA9_config	:	unconfig
 versatile_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm926ejs versatile
 
+voiceblue_smallflash_config	\
+voiceblue_config:	unconfig
+	@if [ "$(findstring _smallflash_,$@)" ] ; then \
+		echo "... boot from lower flash bank" ; \
+		echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
+		echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+	else \
+		echo "... boot from upper flash bank" ; \
+		>include/config.h ; \
+		echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+	fi
+	@./mkconfig -a voiceblue arm arm925t voiceblue
+
+cm4008_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+
+cm41xx_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+
 #########################################################################
 ## S3C44B0 Systems
 #########################################################################
@@ -1359,20 +1505,13 @@ modnet50_config :	unconfig
 evb4510_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm720t evb4510
 
-#########################################################################
-## AT91RM9200 Systems
-#########################################################################
-
-at91rm9200dk_config	:	unconfig
-	@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
-
-cmc_pu2_config	:	unconfig
-	@./mkconfig $(@:_config=) arm at91rm9200 cmc_pu2
-
 #########################################################################
 ## XScale Systems
 #########################################################################
 
+adsvix_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa adsvix
+
 cerf250_config :	unconfig
 	@./mkconfig $(@:_config=) arm pxa cerf250
 
@@ -1484,7 +1623,7 @@ dbau1550_config		:	unconfig
 dbau1550_el_config	:	unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
-	@./mkconfig -a dbau1x00 mips mips dbau1x00 "" little
+	@./mkconfig -a dbau1x00 mips mips dbau1x00
 
 #########################################################################
 ## MIPS64 5Kc
@@ -1590,14 +1729,15 @@ clean:
 		| xargs rm -f
 	rm -f examples/hello_world examples/timer \
 	      examples/eepro100_eeprom examples/sched \
-	      examples/mem_to_mem_idma2intr examples/82559_eeprom
+	      examples/mem_to_mem_idma2intr examples/82559_eeprom \
+	      examples/test_burst
 	rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
 	rm -f tools/mpc86x_clk tools/ncb
 	rm -f tools/easylogo/easylogo tools/bmp_logo
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
-	rm -f board/trab/trab_fkt
+	rm -f board/trab/trab_fkt board/voiceblue/eeprom
 
 clobber:	clean
 	find . -type f \( -name .depend \

README

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000 - 2004
+# (C) Copyright 2000 - 2005
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -126,12 +126,12 @@ Directory Hierarchy:
   - 74xx_7xx	Files specific to Freescale MPC74xx and 7xx CPUs
   - arm720t	Files specific to ARM 720 CPUs
   - arm920t	Files specific to ARM 920 CPUs
+    - at91rm9200 Files specific to Atmel AT91RM9200 CPU
     - imx	Files specific to Freescale MC9328 i.MX CPUs
     - s3c24x0	Files specific to Samsung S3C24X0 CPUs
   - arm925t	Files specific to ARM 925 CPUs
   - arm926ejs	Files specific to ARM 926 CPUs
   - arm1136	Files specific to ARM 1136 CPUs
-  - at91rm9200	Files specific to Atmel AT91RM9200 CPUs
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
   - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
@@ -287,17 +287,17 @@ The following options need to be configured:
 		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
 		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
 		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_ep8260		CONFIG_MPC8540EVAL	CONFIG_TQM850L
+		CONFIG_ERIC		CONFIG_MPC8560ADS	CONFIG_TQM855L
+		CONFIG_ESTEEM192E	CONFIG_MUSENKI		CONFIG_TQM860L
+		CONFIG_ETX094		CONFIG_MVS1		CONFIG_TTTech
+		CONFIG_EVB64260		CONFIG_NETPHONE		CONFIG_UTX8245
+		CONFIG_FADS823		CONFIG_NETTA		CONFIG_V37
+		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMC
+		CONFIG_FADS860T		CONFIG_NX823		CONFIG_W7OLMG
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_WALNUT
+		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZPC1900
+		CONFIG_FPS860L		CONFIG_OXC		CONFIG_ZUMA
 
 		ARM based boards:
 		-----------------
@@ -627,6 +627,7 @@ The following options need to be configured:
 		CFG_CMD_SAVES	* save S record dump
 		CFG_CMD_SCSI	* SCSI Support
 		CFG_CMD_SDRAM	* print SDRAM configuration information
+				  (requires CFG_CMD_I2C)
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
@@ -2128,6 +2129,19 @@ Low Level (hardware related) configuration options:
 		This only takes effect if the memory commands are activated
 		globally (CFG_CMD_MEM).
 
+- CONFIG_SKIP_LOWLEVEL_INIT
+- CONFIG_SKIP_RELOCATE_UBOOT
+
+		[ARM only] If these variables are defined, then
+		certain low level initializations (like setting up
+		the memory controller) are omitted and/or U-Boot does
+		not relocate itself into RAM.
+		Normally these variables MUST NOT be defined. The
+		only exception is when U-Boot is loaded (to RAM) by
+		some other boot loader or by a debugger which
+		performs these intializations itself.
+
+
 Building the Software:
 ======================
 
@@ -2172,14 +2186,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
-				omap2420h4_config	WALNUT405_config
-							Yukon8220_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
+	FADS823_config		NETVIA_config		TQM823L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
+				omap5912osk_config	walnut_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
@@ -3067,8 +3081,7 @@ Booting assumes that (the first part of) the image booted is a
 stage-2 loader which in turn loads and then invokes the kernel
 proper. Loader sources will eventually appear in the NetBSD source
 tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
-meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for
-details.
+meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz
 
 
 Implementation Internals:
@@ -3122,7 +3135,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in
@@ -3368,6 +3381,7 @@ Since the number of patches for U-Boot is growing, we need to
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.
 
+Patches shall be sent to the u-boot-users mailing list.
 
 When you send a patch, please include the following information with
 it:
@@ -3425,3 +3439,6 @@ Notes:
   (using #ifdef), and the resulting code with the new feature
   disabled must not need more memory than the old code without your
   modification.
+
+* Remember that there is a size limit of 40 kB per message on the
+  u-boot-users mailing list. Compression may help.