Fix CHANGELOG

Merge with /home/m8/git/u-boot
Fix CONFIG_440_GX define usage.
2026-06-13 15:03:58 +03:00 · 2006-06-30 20:16:37 +02:00 · 2006-06-30 19:32:25 +02:00 · 2006-06-30 18:35:04 +02:00 · 2006-06-30 18:23:06 +02:00 · 2006-06-30 18:19:42 +02:00
2272 changed files with 258265 additions and 39169 deletions
--- a/1954
+++ b/1954
--- a/15
+++ b/15
@@ -2,10 +2,17 @@
 applications that use U-Boot services by means of the jump table
 provided by U-Boot exactly for this purpose - this is merely
 considered normal use of U-Boot, and does *not* fall under the
-heading of "derived work". Also note that the GPL below is
-copyrighted by the Free Software Foundation, but the instance of code
-that it refers to (the U-Boot source code) is copyrighted by me and
-others who actually wrote it. -- Wolfgang Denk
+heading of "derived work".
+
+  The header files "include/image.h" and "include/asm-*/u-boot.h"
+define interfaces to U-Boot. Including these (unmodified) header
+files in another file is considered normal use of U-Boot, and does
+*not* fall under the heading of "derived work".
+
+  Also note that the GPL below is copyrighted by the Free Software
+Foundation, but the instance of code that it refers to (the U-Boot
+source code) is copyrighted by me and others who actually wrote it.
+-- Wolfgang Denk

 =======================================================================

--- a/50
+++ b/50
@@ -29,6 +29,7 @@ D: ERIC Support
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA & NETPHONE board support, ARTOS support.
+D: Support for Silicon Turnkey eXpress XTc

 N: Pierre Aubert
 E: <p.aubert@staubli.com>
@@ -40,6 +41,7 @@ D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
 D: Support for Zephyr Engineering ZPC.1900 board.
 D: Support for Interphase iSPAN boards.
 D: Support for Analogue&Micro Adder boards.
+D: Support for Analogue&Micro Rattler boards.
 W: http://www.arabellasw.com

 N: Jerry van Baren
@@ -63,6 +65,12 @@ N: Raphael Bossek
 E: raphael.bossek@solutions4linux.de
 D: 8xxrom-0.3.0

+N: Cliff Brake
+E: cliff.brake@gmail.com
+D: Port to Vibren PXA255 IDP platform
+W: http://www.vibren.com
+W: http://bec-systems.com
+
 N: Rick Bronson
 E: rick@efn.org
 D: Atmel AT91RM9200DK and NAND support
@@ -97,6 +105,10 @@ N: Magnus Damm
 E: damm@opensource.se
 D: 8xxrom

+N: Richard Danter
+E: richard.danter@windriver.com
+D: Support for Wind River PPMC 7xx/74xx boards
+
 N: George G. Davis
 E: gdavis@mvista.com
 D: Board ports for ADS GraphicsClient+ and Intel Assabet
@@ -197,10 +209,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
 W: www.denx.de

 N: Murray Jensen
-E: Murray.Jensen@cmst.csiro.au
+E: Murray.Jensen@csiro.au
 D: Initial 8260 support; GDB support
 D: Port to Cogent+Hymod boards; Hymod Board Database
-W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html

 N: Yoo. Jonghoon
 E: yooth@ipone.co.kr
@@ -246,7 +257,12 @@ D  Support for Intrinsyc CERF PXA250 board.

 N: Thomas Lange
 E: thomas@corelatus.se
-D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes
+D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
+
+N: Marc Leeman
+E: marc.leeman@barco.com
+D: Support for Barco Streaming Video Card (SVC) and Sample Compress Network (SCN)
+W: www.barco.com

 N: The LEOX team
 E: team@leox.org
@@ -268,8 +284,9 @@ E: lo@routefree.com
 D: Support for DOS partitions

 N: Dan Malek
-E: dan@netx4.com
+E: dan@embeddedalley.com
 D: FADSROM, the grandfather of all of this
+D: Support for Silicon Turnkey eXpress XTc

 N: Andrea "llandre" Marson
 E: andrea.marson@dave-tech.it
@@ -304,6 +321,10 @@ E: rof@sysgo.de
 D: Initial support for SSV-DNP1110, SMC91111 driver
 W: www.elinos.com

+N: John Otken
+E: jotken@softadvances.com
+D: Support for AMCC Luan 440SP board
+
 N: Tolunay Orkun
 E: torkun@nextio.com
 D: Support for Cogent CSB272 & CSB472 boards
@@ -338,7 +359,7 @@ W: http://www.windriver.com

 N: Stefan Roese
 E: stefan.roese@esd-electronics.com
-D: IBM PPC401/403/405GP Support; Windows environment support
+D: AMCC PPC401/403/405GP Support; Windows environment support

 N: Erwin Rol
 E: erwin@muffin.org
@@ -354,7 +375,7 @@ D: Author of LiMon-1.4.2, which contributed some ideas

 N: Travis B. Sawyer
 E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.  IBM 440gx Ref Platform (Ocotea)
+D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board.  AMCC 440gx Ref Platform (Ocotea)

 N: Paolo Scaffardi
 E: arsenio@tin.it
@@ -364,6 +385,10 @@ N: Robert Schwebel
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)

+N: Art Shipkowski
+E: art@videon-central.com
+D: Support for NetSilicon NS7520
+
 N: Yasushi Shoji
 E: yashi@atmark-techno.com
 D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
@@ -393,6 +418,10 @@ N: Rune Torgersen
 E: <runet@innovsys.com>
 D: Support for Motorola MPC8266ADS board

+N: Greg Ungerer
+E: greg.ungerer@opengear.com
+D: Support for ks8695 CPU, and OpenGear cmXXXX boards
+
 N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions
@@ -401,6 +430,10 @@ N: Christian Vejlbo
 E: christian.vejlbo@tellabs.com
 D: FADS860T ethernet support

+N: Robert Whaley
+E: rwhaley@applieddata.net
+D: Port to ARM PXA27x adsvix SBC
+
 N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board
@@ -422,3 +455,8 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
+
+N: James MacAulay
+E: james.macaulay@amirix.com
+D: Suppport for Amirix AP1000
+W: www.amirix.com
--- a/333
+++ b/333
@@ -27,23 +27,24 @@ Pantelis Antoniou <panto@intracom.gr>

 Reinhard Arlt <reinhard.arlt@esd-electronics.com>

+	cpci5200		MPC5200
+	pf5200			MPC5200
+
 	CPCI750			PPC750FX/GX

 Yuli Barcohen <yuli@arabellasw.com>

 	Adder			MPC87x/MPC852T
+	ep8248			MPC8248
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
+	Rattler			MPC8248
 	ZPC1900			MPC8265

 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>

 	sacsng			MPC8260

-Rick Bronson <rick@efn.org>
-
-	AT91RM9200DK		at91rm9200
-
 Oliver Brown <obrown@adventnetworks.com>

 	gw8260			MPC8260
@@ -128,114 +129,14 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>

 	AmigaOneG3SE		MPC7xx

-Frank Gottschling <fgottschling@eltec.de>
-
-	MHPC			MPC8xx
-
-	BAB7xx			MPC740/MPC750
-
-Wolfgang Grandegger <wg@denx.de>
-
-	CCM			MPC855
-
-	PN62			MPC8240
-
-	IPHASE4539		MPC8260
-	SCM			MPC8260
-
-Howard Gray <mvsensor@matrix-vision.de>
-
-	MVS1			MPC823
-
-Bill Hargen <Bill_Hargen@Jabil.com>
-
-	BUBINGA405EP		PPC405EP
-
-Klaus Heydeck <heydeck@kieback-peter.de>
-
-	KUP4K			MPC855
-	KUP4X			MPC859
-
-Murray Jensen <Murray.Jensen@cmst.csiro.au>
-
-	cogent_mpc8xx		MPC8xx
-
-	cogent_mpc8260		MPC8260
-	hymod			MPC8260
-
-Brad Kemp <Brad.Kemp@seranoa.com>
-
-	ppmc8260		MPC8260
-
-Sangmoon Kim <dogoil@etinsys.com>
-
-	debris			MPC8245
-
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
-Thomas Lange <thomas@corelatus.se>
-
-	GTH			MPC860
-
-The LEOX team <team@leox.org>
-
-	ELPT860			MPC860T
-
-Eran Man <eran@nbase.co.il>
-
-	EVB64260_750CX		MPC750CX
-
-Andrea "llandre" Marson <andrea.marson@dave-tech.it>
-
-	PPChameleonEVB	PPC405EP
-
-Reinhard Meyer <r.meyer@emk-elektronik.de>
-
-	TOP860			MPC860T
-	TOP5200			MPC5200
-
-Scott McNutt <smcnutt@artesyncp.com>
-
-	EBONY			PPC440GP
-
-Tolunay Orkun <torkun@nextio.com>
-	csb272			PPC405GP
-	csb472			PPC405GP
-
-Keith Outwater <Keith_Outwater@mvis.com>
-
-	GEN860T			MPC860T
-	GEN860T_SC		MPC860T
-
-Frank Panno <fpanno@delphintech.com>
-
-	ep8260			MPC8260
-
-Peter Pearse <peter.pearse@arm.com>
-
-	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
-	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
-	Versatile/AB		ARM926EJ-S
-	Versatile/PB		ARM926EJ-S
-
-Denis Peter <d.peter@mpl.ch>
-
-	MIP405			PPC4xx
-	PIP405			PPC4xx
-
-Daniel Poirot <dan.poirot@windriver.com>
-	sbc8240			MPC8240
-	sbc405			PPC405GP
-
-Stefan Roese <stefan.roese@esd-electronics.com>
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>

 	ADCIOP			IOP480 (PPC401)
 	APC405			PPC405GP
 	AR405			PPC405GP
 	ASH405			PPC405EP
 	CANBT			PPC405CR
+	CPCI2DP			PPC405GP
 	CPCI405			PPC405GP
 	CPCI4052		PPC405GP
 	CPCI405AB		PPC405GP
@@ -256,11 +157,147 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 	VOH405			PPC405EP
 	VOM405			PPC405EP
 	WUH405			PPC405EP
+	CMS700                  PPC405EP
+
+Frank Gottschling <fgottschling@eltec.de>
+
+	MHPC			MPC8xx
+
+	BAB7xx			MPC740/MPC750
+
+Wolfgang Grandegger <wg@denx.de>
+
+	CCM			MPC855
+
+	PN62			MPC8240
+
+	IPHASE4539		MPC8260
+	SCM			MPC8260
+
+Howard Gray <mvsensor@matrix-vision.de>
+
+	MVS1			MPC823
+
+Klaus Heydeck <heydeck@kieback-peter.de>
+
+	KUP4K			MPC855
+	KUP4X			MPC859
+
+Murray Jensen <Murray.Jensen@csiro.au>
+
+	cogent_mpc8xx		MPC8xx
+
+	cogent_mpc8260		MPC8260
+	hymod			MPC8260
+
+Brad Kemp <Brad.Kemp@seranoa.com>
+
+	ppmc8260		MPC8260
+
+Sangmoon Kim <dogoil@etinsys.com>
+
+	debris			MPC8245
+
+Thomas Lange <thomas@corelatus.se>
+
+	GTH			MPC860
+
+The LEOX team <team@leox.org>
+
+	ELPT860			MPC860T
+
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+	STxXTc			MPC8xx
+
+Eran Man <eran@nbase.co.il>
+
+	EVB64260_750CX		MPC750CX
+
+Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+
+	PPChameleonEVB	PPC405EP
+
+Reinhard Meyer <r.meyer@emk-elektronik.de>
+
+	TOP860			MPC860T
+	TOP5200			MPC5200
+
+Tolunay Orkun <torkun@nextio.com>
+
+	csb272			PPC405GP
+	csb472			PPC405GP
+
+John Otken <jotken@softadvances.com>
+
+	luan			PPC440SP
+
+Keith Outwater <Keith_Outwater@mvis.com>
+
+	GEN860T			MPC860T
+	GEN860T_SC		MPC860T
+
+Frank Panno <fpanno@delphintech.com>
+
+	ep8260			MPC8260
+
+Peter Pearse <peter.pearse@arm.com>
+	integratorcp		All current ARM supplied &
+				supported core modules
+				- see http://www.arm.com
+				/products/DevTools
+				/Hardware_Platforms.html
+	versatile		ARM926EJ-S
+	versatile		ARM926EJ-S
+
+Denis Peter <d.peter@mpl.ch>
+
+	MIP405			PPC4xx
+	PIP405			PPC4xx
+
+Daniel Poirot <dan.poirot@windriver.com>
+
+	sbc8240			MPC8240
+	sbc405			PPC405GP
+
+Stefan Roese <sr@denx.de>
+
+	uc100			MPC857
+
+	TQM85xx			MPC8540/8541/8555/8560
+
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	p3p440			PPC440GP
+	pcs440ep		PPC440EP
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245

 Travis Sawyer (travis.sawyer@sandburst.com>

+	KAREF			PPC440GX
+	METROBOX		PPC440GX
 	XPEDITE1K		PPC440GX
-	OCOTEA			PPC440GX

 Peter De Schrijver <p2@mind.be>

@@ -293,15 +330,6 @@ John Zhan <zhanz@sinovee.com>

 	svm_sc8xx		MPC8xx

-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
 -------------------------------------------------------------------------

 Unknown / orphaned boards:
@@ -320,7 +348,6 @@ Unknown / orphaned boards:

 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx

 	MOUSSE			MPC824x

@@ -337,6 +364,22 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################

+Rowel Atienza <rowel@diwalabs.com>
+
+	armadillo		ARM720T
+
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
+Cliff Brake <cliff.brake@gmail.com>
+
+	pxa255_idp		xscale
+
+Rick Bronson <rick@efn.org>
+
+	AT91RM9200DK		at91rm9200
+
 George G. Davis <gdavis@mvista.com>

 	assabet			SA1100
@@ -355,6 +398,11 @@ Marius Gr
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)

+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>

 	lubbock			xscale
@@ -366,29 +414,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T

-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>

 	omap1610h2		ARM926EJS

-Rishi Bhattacharya <rishi@ti.com>
+Prakash Kumar <prakash@embedx.com>

-	omap5912osk		ARM926EJS
-
-Richard Woodruff <r-woodruff2@ti.com>
-
-	omap2420h4		ARM1136EJS
+	cerf250			xscale

 David Müller <d.mueller@elsoft.ch>

@@ -399,6 +431,15 @@ Rolf Offermanns <rof@sysgo.de>

 	shannon			SA1100

+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
+Stefan Roese <sr@denx.de>
+
+	ixdpg425		xscale
+	pdnb3			xscale
+
 Robert Schwebel <r.schwebel@pengutronix.de>

 	csb226			xscale
@@ -406,7 +447,17 @@ Robert Schwebel <r.schwebel@pengutronix.de>

 Andrea Scian <andrea.scian@dave-tech.it>

-	B2				ARM7TDMI (S3C44B0X)
+	B2			ARM7TDMI (S3C44B0X)
+
+Greg Ungerer <greg.ungerer@opengear.com>
+
+	cm4008			ks8695p
+	cm4116			ks8695p
+	cm4148			ks8695p
+
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS

 Alex Züpke <azu@sysgo.de>

@@ -438,6 +489,7 @@ Wolfgang Denk <wd@denx.de>

 Thomas Lange <thomas@corelatus.se>
 	dbau1x00		MIPS32 Au1000
+	gth2			MIPS32 Au1000

 #########################################################################
 # Nios-32 Systems:							#
@@ -466,6 +518,9 @@ Scott McNutt <smcnutt@psyent.com>

 	PCI5441			Nios-II
 	PK1C20			Nios-II
+	EP1C20			Nios-II
+	EP1S10			Nios-II
+	EP1S40			Nios-II

 #########################################################################
 # MicroBlaze Systems:							#
@@ -485,10 +540,14 @@ Yasushi Shoji <yashi@atmark-techno.com>
 #	Board			CPU					#
 #########################################################################

-Stefan Roese <stefan.roese@esd-electronics.com>
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>

 	TASREG			MCF5249

+Zachary P. Landau <zachary.landau@labxtechnologies.com>
+
+	r5200			mcf52x2
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################
--- a/183
+++ b/183
@@ -25,8 +25,10 @@ LIST_5xx="	\
 #########################################################################

 LIST_5xxx="	\
-	icecube_5100	icecube_5200	EVAL5200	PM520		\
-	Total5100	Total5200	Total5200_Rev2	TQM5200_AA	\
+	BC3450		cpci5200	EVAL5200	icecube_5100	\
+	icecube_5200	lite5200b	mcc200		o2dnt		\
+	pf5200		PM520		Total5100	Total5200	\
+	Total5200_Rev2	TQM5200						\
 "

 #########################################################################
@@ -42,16 +44,16 @@ LIST_8xx="	\
 	CCM		IP860		NETPHONE	RPXlite_DW	\
 	cogent_mpc8xx	IVML24		NETTA		RRvision	\
 	ELPT860		IVML24_128	NETTA2		SM850		\
-	ESTEEM192E	IVML24_256	NETTA_ISDN	SPD823TS	\
-	ETX094		IVMS8		NETVIA		svm_sc8xx	\
-	FADS823		IVMS8_128	NETVIA_V2	SXNI855T	\
-	FADS850SAR	IVMS8_256	NX823		TOP860		\
-	FADS860T	KUP4K		pcu_e		TQM823L		\
-	FLAGADM		KUP4X		QS823		TQM823L_LCD	\
-	FPS850L		LANTEC		QS850		TQM850L		\
-	GEN860T		lwmon		QS860T		TQM855L		\
-	GEN860T_SC	MBX		quantum		TQM860L		\
-							uc100		\
+	EP88x		IVML24_256	NETTA_ISDN	SPD823TS	\
+	ESTEEM192E	IVMS8		NETVIA		svm_sc8xx	\
+	ETX094		IVMS8_128	NETVIA_V2	SXNI855T	\
+	FADS823		IVMS8_256	NX823		TOP860		\
+	FADS850SAR	KUP4K		pcu_e		TQM823L		\
+	FADS860T	KUP4X		QS823		TQM823L_LCD	\
+	FLAGADM		LANTEC		QS850		TQM850L		\
+	FPS850L		lwmon		QS860T		TQM855L		\
+	GEN860T		MBX		quantum		TQM860L		\
+	GEN860T_SC					uc100		\
 							v37		\
 "

@@ -60,16 +62,20 @@ LIST_8xx="	\
 #########################################################################

 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
-	CANBT		CPCI405		CPCI4052	CPCI405AB	\
+	ADCIOP		AP1000		AR405		ASH405		\
+	bubinga		CANBT		CMS700		CPCI2DP		\
+	CPCI405		CPCI4052	CPCI405AB	CPCI405DT	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
-	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
-	PCI405		PIP405		PLU405		PMC405		\
-	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	WUH405          XPEDITE1K			\
+	ebony		ERIC		EXBITGEN	G2000		\
+	HH405		HUB405		JSE		KAREF		\
+	luan		METROBOX	MIP405		MIP405T		\
+	ML2		ml300		ocotea		OCRTC		\
+	ORSG		p3p440		PCI405		pcs440ep	\
+	PIP405		PLU405		PMC405		PPChameleonEVB	\
+	sbc405		VOH405		VOM405		W7OLMC		\
+	W7OLMG		walnut		WUH405		XPEDITE1K	\
+	yellowstone	yosemite	yucca				\
 "

 #########################################################################
@@ -85,10 +91,11 @@ LIST_8220="	\
 #########################################################################

 LIST_824x="	\
-	A3000		BMW		CPC45		CU824		\
-	debris		eXalion		MOUSSE		MUSENKI		\
-	MVBLUE		OXC		PN62		Sandpoint8240	\
-	Sandpoint8245	SL8245		utx8245		sbc8240	\
+	A3000		barco		BMW		CPC45		\
+	CU824		debris		eXalion		HIDDEN_DRAGON	\
+	MOUSSE		MUSENKI		MVBLUE		OXC		\
+	PN62		Sandpoint8240	Sandpoint8245	sbc8240		\
+	SL8245		utx8245						\
 "

 #########################################################################
@@ -96,21 +103,33 @@ LIST_824x="	\
 #########################################################################

 LIST_8260="	\
-	atc		cogent_mpc8260	CPU86		ep8260		\
-	gw8260		hymod		IPHASE4539	ISPAN		\
-	MPC8260ADS	MPC8266ADS	MPC8272ADS	PM826		\
-	PM828		ppmc8260	RPXsuper	rsdproto	\
-	sacsng		sbc8260		SCM		TQM8260_AC	\
-	TQM8260_AD	TQM8260_AE	ZPC1900				\
+	atc		cogent_mpc8260	CPU86		CPU87		\
+	ep8248		ep8260		gw8260		hymod		\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
+	TQM8260_AE	ZPC1900						\
 "

+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="	\
+	TQM834x		MPC8349EMDS					\
+"
+
+
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################

 LIST_85xx="	\
-	MPC8540ADS	MPC8541CDS	MPC8555CDS	MPC8560ADS	\
-	sbc8540		sbc8560		stxgp3				\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
+	TQM8541		TQM8555		TQM8560				\
 "

 #########################################################################
@@ -123,14 +142,15 @@ LIST_74xx="	\
 "

 LIST_7xx="	\
-	BAB7xx		CPCI750		ELPPC				\
+	BAB7xx		CPCI750		ELPPC		ppmc7xx		\
 "

-LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
-	  ${LIST_8xx}  \
-	  ${LIST_824x} ${LIST_8260} \
-	  ${LIST_85xx}	\
-	  ${LIST_4xx}		    \
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
+	  ${LIST_8xx}				\
+	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+	  ${LIST_83xx}				\
+	  ${LIST_85xx}				\
+	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"

 #########################################################################
@@ -143,56 +163,85 @@ LIST_SA="assabet dnp1110 gcplus lart shannon"
 ## ARM7 Systems
 #########################################################################

-LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
+LIST_ARM7="	\
+	armadillo	B2		ep7312		evb4510		\
+	impa7		integratorap	ap7		ap720t		\
+	modnet50							\
+"

 #########################################################################
 ## ARM9 Systems
 #########################################################################

 LIST_ARM9="	\
-	at91rm9200dk	cmc_pu2		integratorcp	integratorap 	\
-	lpd7a400	mx1ads		mx1fs2		omap1510inn	\
+	at91rm9200dk	cmc_pu2						\
+	ap920t		ap922_XA10	ap926ejs	ap946es		\
+	ap966		cp920t		cp922_XA10	cp926ejs	\
+	cp946es		cp966		lpd7a400	mp2usb		\
+	mx1ads		mx1fs2		netstar		omap1510inn	\
 	omap1610h2	omap1610inn	omap730p2	scb9328		\
 	smdk2400	smdk2410	trab		VCMA9		\
-	versatile							\
+	versatile	versatileab	versatilepb	voiceblue
+"
+
+#########################################################################
+## ARM10 Systems
+#########################################################################
+LIST_ARM10="	\
+	integratorcp	cp1026						\
 "

 #########################################################################
 ## ARM11 Systems
 #########################################################################
-LIST_ARM11="omap2420h4"
+LIST_ARM11="	\
+	cp1136		omap2420h4					\
+"

 #########################################################################
 ## Xscale Systems
 #########################################################################

 LIST_pxa="	\
-	cerf250		cradle		csb226		innokom		\
-	lubbock		wepep250	xaeniax		xm250		\
-	xsengine							\
+	adsvix		cerf250		cradle		csb226		\
+	delta		innokom		lubbock		pleb2		\
+	pxa255_idp	wepep250	xaeniax		xm250		\
+	xsengine	zylonite					\
 "

-LIST_ixp="ixdp425"
+LIST_ixp="ixdp425	ixdpg425	pdnb3"


 LIST_arm="	\
 	${LIST_SA}							\
-	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM11}				\
+	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM10} ${LIST_ARM11}		\
 	${LIST_pxa} ${LIST_ixp}						\
 "

 #########################################################################
-## MIPS Systems
+## MIPS Systems		(default = big endian)
 #########################################################################

 LIST_mips4kc="incaip"

 LIST_mips5kc="purple"

-LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
+LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el gth2"

 LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"

+#########################################################################
+## MIPS Systems		(little endian)
+#########################################################################
+
+LIST_mips4kc_el=""
+
+LIST_mips5kc_el=""
+
+LIST_au1xx0_el="dbau1550_el"
+
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
+
 #########################################################################
 ## i386 Systems
 #########################################################################
@@ -206,23 +255,38 @@ LIST_x86="${LIST_I486}"
 #########################################################################

 LIST_nios="	\
-	ADNPESC1 ADNPESC1_base_32					\
+	ADNPESC1		ADNPESC1_base_32			\
 	ADNPESC1_DNPEVA2_base_32					\
-	DK1C20 DK1C20_standard_32					\
-	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
+	DK1C20			DK1C20_standard_32			\
+	DK1S10			DK1S10_standard_32 DK1S10_mtx_ldk_20	\
 "

 #########################################################################
 ## Nios-II Systems
 #########################################################################

-LIST_nios2="PCI5441 PK1C20"
+LIST_nios2="	\
+	EP1C20		EP1S10		EP1S40				\
+	PCI5441		PK1C20						\
+"

 #########################################################################
 ## MicroBlaze Systems
 #########################################################################

-LIST_microblaze="suzaku"
+LIST_microblaze="	\
+	suzaku
+"
+
+#########################################################################
+## ColdFire Systems
+#########################################################################
+
+LIST_coldfire="	\
+	cobra5272	EB+MCF-EV123	EB+MCF-EV123_internal		\
+	M5271EVB	M5272C3		M5282EVB	TASREG		\
+	r5200		M5271EVB					\
+"

 #-----------------------------------------------------------------------

@@ -246,12 +310,13 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \
-	arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|pxa|ixp| \
 	microblaze| \
-	mips| \
+	mips|mips_el| \
 	nios|nios2| \
-	x86|I486)
+	x86|I486| \
+	coldfire)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
--- a/546
+++ b/546
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,6 +21,13 @@
 # MA 02111-1307 USA
 #

+VERSION = 1
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION =
+U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+VERSION_FILE = include/version_autogenerated.h
+
 HOSTARCH := $(shell uname -m | \
 	sed -e s/i.86/i386/ \
 	    -e s/sun4u/sparc64/ \
@@ -29,10 +36,10 @@ HOSTARCH := $(shell uname -m | \
 	    -e s/powerpc/ppc/ \
 	    -e s/macppc/ppc/)

-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')

-export	HOSTARCH
+export	HOSTARCH HOSTOS

 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -46,15 +53,12 @@ ifeq (include/config.mk,$(wildcard include/config.mk))
 # load ARCH, BOARD, and CPU configuration
 include include/config.mk
 export	ARCH CPU BOARD VENDOR SOC
-# load other configuration
-include $(TOPDIR)/config.mk
-
 ifndef CROSS_COMPILE
 ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -81,11 +85,18 @@ endif
 ifeq ($(ARCH),microblaze)
 CROSS_COMPILE = mb-
 endif
+ifeq ($(ARCH),blackfin)
+CROSS_COMPILE = bfin-elf-
+endif
 endif
 endif

 export	CROSS_COMPILE

+# load other configuration
+include $(TOPDIR)/config.mk
+
+
 #########################################################################
 # U-Boot objects....order is important (i.e. start must be first)

@@ -97,9 +108,16 @@ endif
 ifeq ($(CPU),ppc4xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),bf533)
+OBJS += cpu/$(CPU)/start1.o	cpu/$(CPU)/interrupt.o	cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/cplbhdlr.o	cpu/$(CPU)/cplbmgr.o	cpu/$(CPU)/flush.o
+endif

 LIBS  = lib_generic/libgeneric.a
 LIBS += board/$(BOARDDIR)/lib$(BOARD).a
@@ -115,9 +133,12 @@ LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
 LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/nand/libnand.a
+LIBS += drivers/nand_legacy/libnand_legacy.a
 LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/cpu/libcpu.a
 LIBS += common/libcommon.a
+LIBS += $(BOARDLIBS)
 .PHONY : $(LIBS)

 # Add GCC lib
@@ -151,14 +172,14 @@ u-boot.bin:	u-boot
 u-boot.img:	u-boot.bin
 		./tools/mkimage -A $(ARCH) -T firmware -C none \
 		-a $(TEXT_BASE) -e 0 \
-		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
+		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@

 u-boot.dis:	u-boot
 		$(OBJDUMP) -d $< > $@

-u-boot:		depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
+u-boot:		depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
 		UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 		$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
 			--start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
@@ -170,6 +191,13 @@ $(LIBS):
 $(SUBDIRS):
 		$(MAKE) -C $@ all

+version:
+		@echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
+		echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
+		echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
+			 $(TOPDIR)) >> $(VERSION_FILE); \
+		echo "\"" >> $(VERSION_FILE)
+
 gdbtools:
 		$(MAKE) -C tools/gdb || exit 1

@@ -215,6 +243,9 @@ unconfig:
 ## MPC5xx Systems
 #########################################################################

+canmb_config:	unconfig
+	@./mkconfig -a canmb ppc mpc5xxx canmb
+
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi

@@ -224,6 +255,19 @@ PATI_config:		unconfig
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
+
+aev_config: unconfig
+	@./mkconfig -a aev ppc mpc5xxx tqm5200
+
+BC3450_config:	unconfig
+	@./mkconfig -a BC3450 ppc mpc5xxx bc3450
+
+cpci5200_config:  unconfig
+	@./mkconfig -a cpci5200  ppc mpc5xxx cpci5200 esd
+
+hmi1001_config:         unconfig
+	@./mkconfig hmi1001 ppc mpc5xxx hmi1001
+
 Lite5200_config				\
 Lite5200_LOWBOOT_config			\
 Lite5200_LOWBOOT08_config		\
@@ -261,9 +305,38 @@ icecube_5100_config:			unconfig
 		}
 	@./mkconfig -a IceCube ppc mpc5xxx icecube

-inka4x0_config:		unconfig
+inka4x0_config:	unconfig
 	@./mkconfig inka4x0 ppc mpc5xxx inka4x0

+lite5200b_config	\
+lite5200b_LOWBOOT_config:	unconfig
+	@ >include/config.h
+	@ echo "#define CONFIG_MPC5200_DDR"	>>include/config.h
+	@ echo "... DDR memory revision"
+	@ echo "#define CONFIG_MPC5200"		>>include/config.h
+	@ echo "#define CONFIG_LITE5200B"	>>include/config.h
+	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+		  echo "... with LOWBOOT configuration" ; \
+		}
+	@ echo "... with MPC5200B processor"
+	@./mkconfig -a IceCube  ppc mpc5xxx icecube
+
+mcc200_config	\
+mcc200_lowboot_config:	unconfig
+	@ >include/config.h
+	@[ -z "$(findstring lowboot_,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFC000000" >board/mcc200/config.tmp ; \
+		  echo "... with lowboot configuration" ; \
+		}
+	@./mkconfig mcc200 ppc mpc5xxx mcc200
+
+o2dnt_config:
+	@./mkconfig o2dnt ppc mpc5xxx o2dnt
+
+pf5200_config:  unconfig
+	@./mkconfig pf5200  ppc mpc5xxx pf5200 esd
+
 PM520_config \
 PM520_DDR_config \
 PM520_ROMBOOT_config \
@@ -279,6 +352,14 @@ PM520_ROMBOOT_DDR_config:	unconfig
 		}
 	@./mkconfig -a PM520 ppc mpc5xxx pm520

+smmaco4_config: unconfig
+	@./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
+
+spieval_config:	unconfig
+	@echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+	@echo "... with automatic CS configuration"
+	@./mkconfig -a spieval ppc mpc5xxx tqm5200
+
 MINI5200_config	\
 EVAL5200_config	\
 TOP5200_config:	unconfig
@@ -313,35 +394,20 @@ Total5200_Rev2_lowboot_config:	unconfig
 		}
 	@./mkconfig -a Total5200 ppc mpc5xxx total5200

-TQM5200_auto_config		\
-TQM5200_AA_config	\
-TQM5200_AB_config	\
-TQM5200_AC_config	\
+TQM5200_config	\
+TQM5200_STK100_config \
 MiniFAP_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring MiniFAP,$@)" ] || \
 		{ echo "#define CONFIG_MINIFAP"	>>include/config.h ; \
-		  echo "#define CONFIG_TQM5200_AC"	>>include/config.h ; \
 		  echo "... TQM5200_AC on MiniFAP" ; \
 		}
-	@[ -z "$(findstring AA,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AA"	>>include/config.h ; \
-		  echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
-		}
-	@[ -z "$(findstring AB,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AB"	>>include/config.h ; \
-		  echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
-		  echo "... with Graphics Controller"; \
-		}
-	@[ -z "$(findstring AC,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AC"	>>include/config.h ; \
-		  echo "... with 4 MB Flash, 128 MB SDRAM" ; \
-		  echo "... with Graphics Controller"; \
-		}
-	@[ -z "$(findstring auto,$@)" ] || \
-		{ echo "#define CONFIG_CS_AUTOCONF"	>>include/config.h ; \
-		  echo "... with automatic CS configuration" ; \
+	@[ -z "$(findstring STK100,$@)" ] || \
+		{ echo "#define CONFIG_STK52XX_REV100"	>>include/config.h ; \
+		  echo "... on a STK52XX.100 base board" ; \
 		}
+	@echo "#define CONFIG_CS_AUTOCONF">>include/config.h ;
+	@echo "... with automatic CS configuration" ;
 	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200

 #########################################################################
@@ -379,6 +445,9 @@ cogent_mpc8xx_config:	unconfig
 ELPT860_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX

+EP88x_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx ep88x
+
 ESTEEM192E_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx esteem192e

@@ -552,8 +621,21 @@ NETTA2_config:		unconfig
 		 }
 	@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2

-NC650_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx nc650
+NC650_Rev1_config \
+NC650_Rev2_config \
+CP850_config:	unconfig
+	@ >include/config.h
+	@[ -z "$(findstring CP850,$@)" ] || \
+		 { echo "#define CONFIG_CP850 1" >>include/config.h ; \
+		   echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+		 }
+	@[ -z "$(findstring Rev1,$@)" ] || \
+		 { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \
+		 }
+	@[ -z "$(findstring Rev2,$@)" ] || \
+		 { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+		 }
+	@./mkconfig -a NC650 ppc mpc8xx nc650

 NX823_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx nx823
@@ -626,6 +708,9 @@ SM850_config	:	unconfig
 SPD823TS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx spd8xx

+stxxtc_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+
 svm_sc8xx_config:	unconfig
 	@ >include/config.h
 	@./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
@@ -656,7 +741,8 @@ TQM850M_config		\
 TQM855M_config		\
 TQM860M_config		\
 TQM862M_config		\
-TQM866M_config:		unconfig
+TQM866M_config		\
+virtlab2_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring _LCD,$@)" ] || \
 		{ echo "#define CONFIG_LCD"		>>include/config.h ; \
@@ -691,6 +777,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
 ADCIOP_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx adciop esd

+AP1000_config:unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix
+
 APC405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx apc405 esd

@@ -700,8 +789,11 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd

-BUBINGA405EP_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc

 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -721,6 +813,9 @@ CATcenter_33_config:	unconfig
 		}
 	@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave

+CPCI2DP_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd
+
 CPCI405_config	\
 CPCI4052_config	\
 CPCI405DT_config	\
@@ -752,8 +847,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd

-EBONY_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc

 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -773,6 +868,15 @@ HUB405_config:	unconfig
 JSE_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx jse

+KAREF_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+
+luan_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx luan amcc
+
+METROBOX_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
+
 MIP405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl

@@ -787,16 +891,22 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx

-OCOTEA_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc

 OCRTC_config		\
 ORSG_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd

+p3p440_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive
+
 PCI405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pci405 esd

+pcs440ep_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx pcs440ep
+
 PIP405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl

@@ -839,18 +949,25 @@ PPChameleonEVB_HI_33_config:	unconfig
 sbc405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx sbc405

+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd

 VOM405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx vom405 esd

+CMS700_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
+
 W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o

-WALNUT405_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc

 WUH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -858,14 +975,25 @@ WUH405_config:	unconfig
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k

+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
+yucca_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yucca amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
-Alaska8220_config:	unconfig
+
+Alaska8220_config	\
+Yukon8220_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 alaska

-Yukon8220_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8220 yukon
+sorcery_config:		unconfig
+	@./mkconfig $(@:_config=) ppc mpc8220 sorcery

 #########################################################################
 ## MPC824x Systems
@@ -875,6 +1003,9 @@ xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,
 A3000_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x a3000

+barco_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x barco
+
 BMW_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x bmw

@@ -900,6 +1031,9 @@ debris_config: unconfig
 eXalion_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x eXalion

+HIDDEN_DRAGON_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+
 MOUSSE_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x mousse

@@ -930,9 +1064,6 @@ SL8245_config: unconfig
 utx8245_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x utx8245

-cobra5272_config :		unconfig
-	@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
-
 #########################################################################
 ## MPC8260 Systems
 #########################################################################
@@ -956,6 +1087,23 @@ CPU86_ROMBOOT_config: unconfig
 	fi; \
 	echo "export CONFIG_BOOT_ROM" >> config.mk;

+CPU87_config	\
+CPU87_ROMBOOT_config: unconfig
+	@./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
+	@cd ./include ;				\
+	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+		echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+		echo "... booting from 8-bit flash" ; \
+	else \
+		echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+		echo "... booting from 64-bit flash" ; \
+	fi; \
+	echo "export CONFIG_BOOT_ROM" >> config.mk;
+
+ep8248_config	\
+ep8248E_config	:	unconfig
+	@./mkconfig ep8248 ppc mpc8260 ep8248
+
 ep8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ep8260

@@ -965,6 +1113,9 @@ gw8260_config:	unconfig
 hymod_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 hymod

+IDS8247_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 ids8247
+
 IPHASE4539_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 iphase4539

@@ -976,13 +1127,21 @@ ISPAN_REVB_config:	unconfig
 	@./mkconfig -a ISPAN ppc mpc8260 ispan

 MPC8260ADS_config	\
+MPC8260ADS_lowboot_config	\
 MPC8260ADS_33MHz_config	\
+MPC8260ADS_33MHz_lowboot_config	\
 MPC8260ADS_40MHz_config	\
+MPC8260ADS_40MHz_lowboot_config	\
 MPC8272ADS_config	\
+MPC8272ADS_lowboot_config	\
 PQ2FADS_config		\
+PQ2FADS_lowboot_config		\
 PQ2FADS-VR_config	\
+PQ2FADS-VR_lowboot_config	\
 PQ2FADS-ZU_config	\
+PQ2FADS-ZU_lowboot_config	\
 PQ2FADS-ZU_66MHz_config	\
+PQ2FADS-ZU_66MHz_lowboot_config	\
 	:		unconfig
 	$(if $(findstring PQ2FADS,$@), \
 	@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
@@ -991,6 +1150,10 @@ PQ2FADS-ZU_66MHz_config	\
 	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
 	$(if $(findstring VR,$@), \
 	@echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+	@[ -z "$(findstring lowboot_,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+		  echo "... with lowboot configuration" ; \
+		}
 	@./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads

 MPC8266ADS_config:	unconfig
@@ -1034,7 +1197,7 @@ PM828_config	\
 PM828_PCI_config	\
 PM828_ROMBOOT_config	\
 PM828_ROMBOOT_PCI_config:	unconfig
-	@if [ -z "$(findstring _PCI_,$@)" ] ; then \
+	@if [ "$(findstring _PCI_,$@)" ] ; then \
 		echo "#define CONFIG_PCI"  >>include/config.h ; \
 		echo "... with PCI enabled" ; \
 	else \
@@ -1050,6 +1213,12 @@ PM828_ROMBOOT_PCI_config:	unconfig
 ppmc8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ppmc8260

+Rattler8248_config	\
+Rattler_config:		unconfig
+	$(if $(findstring 8248,$@), \
+	@echo "#define CONFIG_MPC8248" > include/config.h)
+	@./mkconfig -a Rattler ppc mpc8260 rattler
+
 RPXsuper_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 rpxsuper

@@ -1074,18 +1243,20 @@ TQM8260_AE_config \
 TQM8260_AF_config \
 TQM8260_AG_config \
 TQM8260_AH_config \
+TQM8260_AI_config \
 TQM8265_AA_config:  unconfig
 	@case "$@" in \
-	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
-	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
-	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
-	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
-	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
-	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
-	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
-	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
-	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
-	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;	BMODE=8260;;  \
+	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;	BMODE=8260;; \
+	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
+	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
+	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
+	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;	BMODE=8260;; \
+	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
+	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=8260;; \
+	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes;	BMODE=60x;;  \
+	TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
+	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;	BMODE=60x;;  \
 	esac; \
 	>include/config.h ; \
 	if [ "$${CTYPE}" != "MPC8260" ] ; then \
@@ -1109,16 +1280,34 @@ TQM8265_AA_config:  unconfig
 	fi
 	@./mkconfig -a TQM8260 ppc mpc8260 tqm8260

+VoVPN-GW_66MHz_config	\
+VoVPN-GW_100MHz_config:		unconfig
+	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
+	@./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+
 ZPC1900_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 zpc1900

-#========================================================================
-# M68K
-#========================================================================
 #########################################################################
 ## Coldfire
 #########################################################################

+cobra5272_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
+EB+MCF-EV123_config :		unconfig
+	@ >include/config.h
+	@echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk
+	@./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+
+EB+MCF-EV123_internal_config :	unconfig
+	@ >include/config.h
+	@echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk
+	@./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+
+M5271EVB_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
+
 M5272C3_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 m5272c3

@@ -1128,6 +1317,22 @@ M5282EVB_config :		unconfig
 TASREG_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd

+r5200_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 r5200
+
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
+TQM834x_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+
+MPC8349EMDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
@@ -1135,15 +1340,44 @@ TASREG_config :		unconfig
 MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads

+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config:      unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "... 33 MHz PCI" ; \
+	else \
+		echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+		echo -n "... 66 MHz PCI" ; \
+	fi ; \
+	if [ "$(findstring _slave_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+		echo " slave" ; \
+	else \
+		echo " host" ; \
+	fi
+	@./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
 MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads

 MPC8541CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds

+MPC8548CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
 MPC8555CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds

+PM854_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm854
+
+PM856_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm856
+
 sbc8540_config \
 sbc8540_33_config \
 sbc8540_66_config:	unconfig
@@ -1171,6 +1405,20 @@ sbc8560_66_config:      unconfig
 stxgp3_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3

+TQM8540_config		\
+TQM8541_config		\
+TQM8555_config		\
+TQM8560_config:		unconfig
+	@CTYPE=$(subst TQM,,$(@:_config=)); \
+	>include/config.h ; \
+	echo "... TQM"$${CTYPE}; \
+	echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \
+	echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \
+	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \
+	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \
+	echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h
+	@./mkconfig -a TQM85xx ppc mpc85xx tqm85xx
+
 #########################################################################
 ## 74xx/7xx Systems
 #########################################################################
@@ -1207,6 +1455,9 @@ PCIPPC6_config: unconfig
 ZUMA_config:	unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260

+ppmc7xx_config: unconfig
+	@./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx
+	
 #========================================================================
 # ARM
 #========================================================================
@@ -1239,11 +1490,47 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$

 xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))

-integratorap_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs integratorap
+at91rm9200dk_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200

-integratorcp_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs integratorcp
+cmc_pu2_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+
+csb637_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200
+
+mp2usb_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+
+
+########################################################################
+## ARM Integrator boards - see doc/README-integrator for more info.
+integratorap_config	\
+ap_config		\
+ap966_config		\
+ap922_config		\
+ap922_XA10_config	\
+ap7_config		\
+ap720t_config  		\
+ap920t_config		\
+ap926ejs_config		\
+ap946es_config: unconfig
+	@board/integratorap/split_by_variant.sh $@
+
+integratorcp_config	\
+cp_config		\
+cp920t_config		\
+cp926ejs_config		\
+cp946es_config		\
+cp1136_config		\
+cp966_config		\
+cp922_config		\
+cp922_XA10_config	\
+cp1026_config: unconfig
+	@board/integratorcp/split_by_variant.sh $@
+
+kb9202_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200

 lpd7a400_config \
 lpd7a404_config:	unconfig
@@ -1255,11 +1542,22 @@ mx1ads_config	:	unconfig
 mx1fs2_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx

+netstar_32_config	\
+netstar_config:		unconfig
+	@if [ "$(findstring _32_,$@)" ] ; then \
+		echo "... 32MB SDRAM" ; \
+		echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \
+	else \
+		echo "... 64MB SDRAM" ; \
+		echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \
+	fi
+	@./mkconfig -a netstar arm arm925t netstar
+
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn

 omap5912osk_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs omap5912osk
+	@./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap

 omap1610inn_config \
 omap1610inn_cs0boot_config \
@@ -1279,7 +1577,7 @@ omap1610h2_cs_autoboot_config:	unconfig
 		echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
 		echo "... configured for CS3 boot"; \
 	fi;
-	@./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
+	@./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap

 omap730p2_config \
 omap730p2_cs0boot_config \
@@ -1291,7 +1589,7 @@ omap730p2_cs3boot_config :	unconfig
 		echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
 		echo "... configured for CS3 boot"; \
 	fi;
-	@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+	@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap

 scb9328_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
@@ -1333,8 +1631,37 @@ trab_old_config:	unconfig
 VCMA9_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0

-versatile_config :	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs versatile
+#========================================================================
+# ARM supplied Versatile development boards
+#========================================================================
+versatile_config	\
+versatileab_config	\
+versatilepb_config :	unconfig
+	@board/versatile/split_by_variant.sh $@
+
+voiceblue_smallflash_config	\
+voiceblue_config:	unconfig
+	@if [ "$(findstring _smallflash_,$@)" ] ; then \
+		echo "... boot from lower flash bank" ; \
+		echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
+		echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+	else \
+		echo "... boot from upper flash bank" ; \
+		>include/config.h ; \
+		echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+	fi
+	@./mkconfig -a voiceblue arm arm925t voiceblue
+
+cm4008_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+
+cm41xx_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+
+gth2_config		: 	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_GTH2 1" >>include/config.h
+	@./mkconfig -a gth2 mips mips gth2

 #########################################################################
 ## S3C44B0 Systems
@@ -1347,6 +1674,9 @@ B2_config	:	unconfig
 ## ARM720T Systems
 #########################################################################

+armadillo_config:	unconfig
+	@./mkconfig $(@:_config=) arm arm720t armadillo
+
 ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312

@@ -1359,20 +1689,13 @@ modnet50_config :	unconfig
 evb4510_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm720t evb4510

-#########################################################################
-## AT91RM9200 Systems
-#########################################################################
-
-at91rm9200dk_config	:	unconfig
-	@./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk
-
-cmc_pu2_config	:	unconfig
-	@./mkconfig $(@:_config=) arm at91rm9200 cmc_pu2
-
 #########################################################################
 ## XScale Systems
 #########################################################################

+adsvix_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa adsvix
+
 cerf250_config :	unconfig
 	@./mkconfig $(@:_config=) arm pxa cerf250

@@ -1382,18 +1705,33 @@ cradle_config	:	unconfig
 csb226_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa csb226

+delta_config :
+	@./mkconfig $(@:_config=) arm pxa delta
+
 innokom_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa innokom

 ixdp425_config	:	unconfig
 	@./mkconfig $(@:_config=) arm ixp ixdp425

+ixdpg425_config	:	unconfig
+	@./mkconfig $(@:_config=) arm ixp ixdp425
+
 lubbock_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa lubbock

+pleb2_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa pleb2
+
 logodl_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa logodl

+pdnb3_config	:	unconfig
+	@./mkconfig $(@:_config=) arm ixp pdnb3 prodrive
+
+pxa255_idp_config:	unconfig
+	@./mkconfig $(@:_config=) arm pxa pxa255_idp
+
 wepep250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa wepep250

@@ -1406,6 +1744,9 @@ xm250_config	:	unconfig
 xsengine_config :	unconfig
 	@./mkconfig $(@:_config=) arm pxa xsengine

+zylonite_config :
+	@./mkconfig $(@:_config=) arm pxa zylonite
+
 #########################################################################
 ## ARM1136 Systems
 #########################################################################
@@ -1484,7 +1825,12 @@ dbau1550_config		:	unconfig
 dbau1550_el_config	:	unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
-	@./mkconfig -a dbau1x00 mips mips dbau1x00 "" little
+	@./mkconfig -a dbau1x00 mips mips dbau1x00
+
+pb1000_config		: 	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_PB1000 1" >>include/config.h
+	@./mkconfig -a pb1x00 mips mips pb1x00

 #########################################################################
 ## MIPS64 5Kc
@@ -1563,6 +1909,15 @@ ADNPESC1_config: unconfig
 ## Nios-II
 #########################################################################

+EP1C20_config : unconfig
+	@./mkconfig  EP1C20 nios2 nios2 ep1c20 altera
+
+EP1S10_config : unconfig
+	@./mkconfig  EP1S10 nios2 nios2 ep1s10 altera
+
+EP1S40_config : unconfig
+	@./mkconfig  EP1S40 nios2 nios2 ep1s40 altera
+
 PK1C20_config : unconfig
 	@./mkconfig  PK1C20 nios2 nios2 pk1c20 psyent

@@ -1580,6 +1935,19 @@ suzaku_config:	unconfig
 	@echo "#define CONFIG_SUZAKU 1" >> include/config.h
 	@./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno

+#########################################################################
+## Blackfin
+#########################################################################
+ezkit533_config	:	unconfig
+	@./mkconfig $(@:_config=) blackfin bf533 ezkit533
+
+stamp_config	:	unconfig
+	@./mkconfig $(@:_config=) blackfin bf533 stamp
+
+dspstamp_config	:	unconfig
+	@./mkconfig $(@:_config=) blackfin bf533 dsp_stamp
+
+#########################################################################
 #########################################################################
 #########################################################################

@@ -1590,21 +1958,27 @@ clean:
 		| xargs rm -f
 	rm -f examples/hello_world examples/timer \
 	      examples/eepro100_eeprom examples/sched \
-	      examples/mem_to_mem_idma2intr examples/82559_eeprom
+	      examples/mem_to_mem_idma2intr examples/82559_eeprom \
+	      examples/smc91111_eeprom \
+	      examples/test_burst
 	rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
 	rm -f tools/mpc86x_clk tools/ncb
 	rm -f tools/easylogo/easylogo tools/bmp_logo
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
-	rm -f board/trab/trab_fkt
+	rm -f board/netstar/eeprom board/netstar/crcek
+	rm -f board/netstar/*.srec board/netstar/*.bin
+	rm -f board/trab/trab_fkt board/voiceblue/eeprom
+	rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
+	rm -f include/bmp_logo.h

 clobber:	clean
 	find . -type f \( -name .depend \
 		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
 		-print0 \
 		| xargs -0 rm -f
-	rm -f $(OBJS) *.bak tags TAGS
+	rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
 	rm -fr *.*~
 	rm -f u-boot u-boot.map u-boot.hex $(ALL)
 	rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
--- a/246
+++ b/246
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000 - 2004
+# (C) Copyright 2000 - 2005
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -126,12 +126,12 @@ Directory Hierarchy:
  - 74xx_7xx	Files specific to Freescale MPC74xx and 7xx CPUs
  - arm720t	Files specific to ARM 720 CPUs
  - arm920t	Files specific to ARM 920 CPUs
+    - at91rm9200 Files specific to Atmel AT91RM9200 CPU
    - imx	Files specific to Freescale MC9328 i.MX CPUs
    - s3c24x0	Files specific to Samsung S3C24X0 CPUs
  - arm925t	Files specific to ARM 925 CPUs
  - arm926ejs	Files specific to ARM 926 CPUs
  - arm1136	Files specific to ARM 1136 CPUs
-  - at91rm9200	Files specific to Atmel AT91RM9200 CPUs
  - i386	Files specific to i386 CPUs
  - ixp		Files specific to Intel XScale IXP CPUs
  - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
@@ -145,7 +145,7 @@ Directory Hierarchy:
  - mpc85xx	Files specific to Freescale MPC85xx CPUs
  - nios	Files specific to Altera NIOS CPUs
  - nios2	Files specific to Altera Nios-II CPUs
-  - ppc4xx	Files specific to IBM PowerPC 4xx CPUs
+  - ppc4xx	Files specific to AMCC PowerPC 4xx CPUs
  - pxa		Files specific to Intel XScale PXA CPUs
  - s3c44b0	Files specific to Samsung S3C44B0 CPUs
  - sa1100	Files specific to Intel StrongARM SA1100 CPUs
@@ -246,6 +246,7 @@ The following options need to be configured:
 		CONFIG_SA1110
 		CONFIG_ARM7
 		CONFIG_PXA250
+		CONFIG_CPU_MONAHANS

 		MicroBlaze based CPUs:
 		----------------------
@@ -261,54 +262,57 @@ The following options need to be configured:
 		PowerPC based boards:
 		---------------------

-		CONFIG_ADCIOP		CONFIG_GEN860T		CONFIG_PCI405
-		CONFIG_ADS860		CONFIG_GENIETV		CONFIG_PCIPPC2
-		CONFIG_AMX860		CONFIG_GTH		CONFIG_PCIPPC6
+		CONFIG_ADCIOP		CONFIG_FPS860L		CONFIG_OXC
+		CONFIG_ADS860		CONFIG_GEN860T		CONFIG_PCI405
+		CONFIG_AMX860		CONFIG_GENIETV		CONFIG_PCIPPC2
+		CONFIG_AP1000		CONFIG_GTH		CONFIG_PCIPPC6
 		CONFIG_AR405		CONFIG_gw8260		CONFIG_pcu_e
 		CONFIG_BAB7xx		CONFIG_hermes		CONFIG_PIP405
-		CONFIG_c2mon		CONFIG_hymod		CONFIG_PM826
-		CONFIG_CANBT		CONFIG_IAD210		CONFIG_ppmc8260
-		CONFIG_CCM		CONFIG_ICU862		CONFIG_QS823
-		CONFIG_CMI		CONFIG_IP860		CONFIG_QS850
-		CONFIG_cogent_mpc8260	CONFIG_IPHASE4539	CONFIG_QS860T
-		CONFIG_cogent_mpc8xx	CONFIG_IVML24		CONFIG_RBC823
-		CONFIG_CPCI405		CONFIG_IVML24_128	CONFIG_RPXClassic
-		CONFIG_CPCI4052		CONFIG_IVML24_256	CONFIG_RPXlite
-		CONFIG_CPCIISER4	CONFIG_IVMS8		CONFIG_RPXsuper
-		CONFIG_CPU86		CONFIG_IVMS8_128	CONFIG_rsdproto
-		CONFIG_CRAYL1		CONFIG_IVMS8_256	CONFIG_sacsng
-		CONFIG_CSB272		CONFIG_JSE		CONFIG_Sandpoint8240
-		CONFIG_CU824		CONFIG_LANTEC		CONFIG_Sandpoint8245
-		CONFIG_DASA_SIM		CONFIG_lwmon		CONFIG_sbc8260
-		CONFIG_DB64360		CONFIG_MBX		CONFIG_sbc8560
-		CONFIG_DB64460		CONFIG_MBX860T		CONFIG_SM850
-		CONFIG_DU405		CONFIG_MHPC		CONFIG_SPD823TS
-		CONFIG_DUET_ADS		CONFIG_MIP405		CONFIG_STXGP3
-		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
-		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
-		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_BC3450		CONFIG_hymod		CONFIG_PM826
+		CONFIG_c2mon		CONFIG_IAD210		CONFIG_ppmc8260
+		CONFIG_CANBT		CONFIG_ICU862		CONFIG_QS823
+		CONFIG_CCM		CONFIG_IP860		CONFIG_QS850
+		CONFIG_CMI		CONFIG_IPHASE4539	CONFIG_QS860T
+		CONFIG_cogent_mpc8260	CONFIG_IVML24		CONFIG_RBC823
+		CONFIG_cogent_mpc8xx	CONFIG_IVML24_128	CONFIG_RPXClassic
+		CONFIG_CPCI405		CONFIG_IVML24_256	CONFIG_RPXlite
+		CONFIG_CPCI4052		CONFIG_IVMS8		CONFIG_RPXsuper
+		CONFIG_CPCIISER4	CONFIG_IVMS8_128	CONFIG_rsdproto
+		CONFIG_CPU86		CONFIG_IVMS8_256	CONFIG_sacsng
+		CONFIG_CRAYL1		CONFIG_JSE		CONFIG_Sandpoint8240
+		CONFIG_CSB272		CONFIG_LANTEC		CONFIG_Sandpoint8245
+		CONFIG_CU824		CONFIG_LITE5200B	CONFIG_sbc8260
+		CONFIG_DASA_SIM		CONFIG_lwmon		CONFIG_sbc8560
+		CONFIG_DB64360		CONFIG_MBX		CONFIG_SM850
+		CONFIG_DB64460		CONFIG_MBX860T		CONFIG_SPD823TS
+		CONFIG_DU405		CONFIG_MHPC		CONFIG_STXGP3
+		CONFIG_DUET_ADS		CONFIG_MIP405		CONFIG_SXNI855T
+		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_TQM823L
+		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM8260
+		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM850L
+		CONFIG_ep8260		CONFIG_MPC8540EVAL	CONFIG_TQM855L
+		CONFIG_ERIC		CONFIG_MPC8560ADS	CONFIG_TQM860L
+		CONFIG_ESTEEM192E	CONFIG_MUSENKI		CONFIG_TTTech
+		CONFIG_ETX094		CONFIG_MVS1		CONFIG_UTX8245
+		CONFIG_EVB64260		CONFIG_NETPHONE		CONFIG_V37
+		CONFIG_FADS823		CONFIG_NETTA		CONFIG_W7OLMC
+		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMG
+		CONFIG_FADS860T		CONFIG_NX823		CONFIG_WALNUT
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_ZPC1900
+		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZUMA

 		ARM based boards:
 		-----------------

-		CONFIG_AT91RM9200DK,	CONFIG_CERF250,		CONFIG_DNP1110,
-		CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
-		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
-		CONFIG_LART,		CONFIG_LPD7A400		CONFIG_LUBBOCK,
-		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,	CONFIG_SHANNON,
-		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,	CONFIG_SMDK2410,
-		CONFIG_TRAB,		CONFIG_VCMA9
+		CONFIG_ARMADILLO,	CONFIG_AT91RM9200DK,	CONFIG_CERF250,
+		CONFIG_CSB637,		CONFIG_DELTA,		CONFIG_DNP1110,
+	 	CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_IMPA7,	    CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
+		CONFIG_KB9202,		CONFIG_LART,		CONFIG_LPD7A400,
+		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
+		CONFIG_PLEB2,		CONFIG_SHANNON,		CONFIG_P2_OMAP730,
+		CONFIG_SMDK2400,	CONFIG_SMDK2410,	CONFIG_TRAB,
+		CONFIG_VCMA9

 		MicroBlaze based boards:
 		------------------------
@@ -319,6 +323,7 @@ The following options need to be configured:
 		------------------------

 		CONFIG_PCI5441 CONFIG_PK1C20
+		CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40


 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -377,6 +382,20 @@ The following options need to be configured:
 		that this requires a (stable) reference clock (32 kHz
 		RTC clock or CFG_8XX_XIN)

+- Intel Monahans options:
+		CFG_MONAHANS_RUN_MODE_OSC_RATIO
+
+		Defines the Monahans run mode to oscillator
+		ratio. Valid values are 8, 16, 24, 31. The core
+		frequency is this value multiplied by 13 MHz.
+
+		CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+
+		Defines the Monahans turbo mode to oscillator
+		ratio. Valid values are 1 (default if undefined) and
+		2. The core frequency as calculated above is multiplied
+		by this value.
+
 - Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ

@@ -397,6 +416,37 @@ The following options need to be configured:
 		expect it to be in bytes, others in MB.
 		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.

+		CONFIG_OF_FLAT_TREE
+
+		New kernel versions are expecting firmware settings to be
+		passed using flat open firmware trees.
+		The environment variable "disable_of", when set, disables this
+		functionality.
+
+		CONFIG_OF_FLAT_TREE_MAX_SIZE
+
+		The maximum size of the constructed OF tree.
+
+		OF_CPU - The proper name of the cpus node.
+		OF_SOC - The proper name of the soc node.
+		OF_TBCLK - The timebase frequency.
+		OF_STDOUT_PATH - The path to the console device
+
+		CONFIG_OF_HAS_BD_T
+
+		The resulting flat device tree will have a copy of the bd_t.
+		Space should be pre-allocated in the dts for the bd_t.
+
+		CONFIG_OF_HAS_UBOOT_ENV
+
+		The resulting flat device tree will have a copy of u-boot's
+		environment variables
+
+		CONFIG_OF_BOARD_SETUP
+
+		Board code has addition modification that it wants to make
+		to the flat device tree before handing it off to the kernel
+
 - Serial Ports:
 		CFG_PL010_SERIAL

@@ -497,7 +547,7 @@ The following options need to be configured:
 - Console UART Number:
 		CONFIG_UART1_CONSOLE

-		IBM PPC4xx only.
+		AMCC PPC4xx only.
 		If defined internal UART1 (and not UART0) is used
 		as default U-Boot console.

@@ -590,7 +640,7 @@ The following options need to be configured:
 		CFG_CMD_DIAG	* Diagnostics
 		CFG_CMD_DOC	* Disk-On-Chip Support
 		CFG_CMD_DTT	* Digital Therm and Thermostat
-		CFG_CMD_ECHO	* echo arguments
+		CFG_CMD_ECHO	  echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
 		CFG_CMD_ELF	* bootelf, bootvx
 		CFG_CMD_ENV	  saveenv
@@ -627,6 +677,7 @@ The following options need to be configured:
 		CFG_CMD_SAVES	* save S record dump
 		CFG_CMD_SCSI	* SCSI Support
 		CFG_CMD_SDRAM	* print SDRAM configuration information
+				  (requires CFG_CMD_I2C)
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
@@ -959,6 +1010,12 @@ The following options need to be configured:
 		allows for a "silent" boot where a splash screen is
 		loaded very quickly after power-on.

+- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
+
+		If this option is set, additionally to standard BMP
+		images, gzipped BMP images can be displayed via the
+		splashscreen support or the bmp command.
+
 - Compression support:
 		CONFIG_BZIP2

@@ -1354,7 +1411,7 @@ The following options need to be configured:
 		remaining RAM in a form that can be passed as boot
 		argument to Linux, for instance like that:

-			setenv bootargs ... mem=\$(mem)
+			setenv bootargs ... mem=\${mem}
 			saveenv

 		This way you can tell Linux not to use this memory,
@@ -1480,6 +1537,26 @@ The following options need to be configured:
 		When SystemACE support is added, the "ace" device type
 		becomes available to the fat commands, i.e. fatls.

+- TFTP Fixed UDP Port:
+		CONFIG_TFTP_PORT
+
+		If this is defined, the environment variable tftpsrcp
+		is used to supply the TFTP UDP source port value.
+		If tftpsrcp isn't defined, the normal pseudo-random port
+		number generator is used.
+
+		Also, the environment variable tftpdstp is used to supply
+		the TFTP UDP destination port value.  If tftpdstp isn't
+		defined, the normal port 69 is used.
+
+		The purpose for tftpsrcp is to allow a TFTP server to
+		blindly start the TFTP transfer using the pre-configured
+		target IP address and UDP port. This has the effect of
+		"punching through" the (Windows XP) firewall, allowing
+		the remainder of the TFTP transfer to proceed normally.
+		A better solution is to properly configure the firewall,
+		but sometimes that is not allowed.
+
 - Show boot progress:
 		CONFIG_SHOW_BOOT_PROGRESS

@@ -1674,6 +1751,12 @@ Configuration Settings:
 - CFG_MALLOC_LEN:
 		Size of DRAM reserved for malloc() use.

+- CFG_BOOTM_LEN:
+		Normally compressed uImages are limited to an
+		uncompressed size of 8 MBytes. If this is not enough,
+		you can define CFG_BOOTM_LEN in your board config file
+		to adjust this setting to your needs.
+
 - CFG_BOOTMAPSZ:
 		Maximum size of memory mapped by the startup code of
 		the Linux kernel; all data that must be processed by
@@ -1723,6 +1806,12 @@ Configuration Settings:
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory

+- CFG_FLASH_QUIET_TEST
+		If this option is defined, the common CFI flash doesn't
+		print it's warning upon not recognized FLASH banks. This
+		is useful, if some of the configured banks are only
+		optionally available.
+
 - CFG_RX_ETH_BUFFER:
 		Defines the number of ethernet receive buffers. On some
 		ethernet controllers it is recommended to set this value
@@ -1897,6 +1986,17 @@ to save the current settings.
 	  These two #defines specify the offset and size of the environment
 	  area within the first NAND device.

+	- CFG_ENV_OFFSET_REDUND
+
+	  This setting describes a second storage area of CFG_ENV_SIZE
+	  size used to hold a redundant copy of the environment data,
+	  so that there is a valid backup copy in case there is a
+	  power failure during a "saveenv" operation.
+
+	Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
+	to a block boundary, and CFG_ENV_SIZE must be a multiple of
+	the NAND devices block size.
+
 - CFG_SPI_INIT_OFFSET

 	Defines offset to the initial SPI buffer area in DPRAM. The
@@ -2128,6 +2228,19 @@ Low Level (hardware related) configuration options:
 		This only takes effect if the memory commands are activated
 		globally (CFG_CMD_MEM).

+- CONFIG_SKIP_LOWLEVEL_INIT
+- CONFIG_SKIP_RELOCATE_UBOOT
+
+		[ARM only] If these variables are defined, then
+		certain low level initializations (like setting up
+		the memory controller) are omitted and/or U-Boot does
+		not relocate itself into RAM.
+		Normally these variables MUST NOT be defined. The
+		only exception is when U-Boot is loaded (to RAM) by
+		some other boot loader or by a debugger which
+		performs these intializations itself.
+
+
 Building the Software:
 ======================

@@ -2172,14 +2285,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
-				omap2420h4_config	WALNUT405_config
-							Yukon8220_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
+	FADS823_config		NETVIA_config		TQM823L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
+				omap5912osk_config	walnut_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config

 Note: for some board special configuration names may exist; check if
@@ -2432,6 +2545,12 @@ Some configuration options can be set using Environment Variables:
 		  Useful on scripts which control the retry operation
 		  themselves.

+  tftpsrcport	- If this is set, the value is used for TFTP's
+		  UDP source port.
+
+  tftpdstport	- If this is set, the value is used for TFTP's UDP
+		  destination port instead of the Well Know Port 69.
+
   vlan		- When set to a value < 4095 the traffic over
 		  ethernet is encapsulated/received over 802.1q
 		  VLAN tagged frames.
@@ -2484,10 +2603,10 @@ Old, simple command line parser:

 - supports environment variables (through setenv / saveenv commands)
 - several commands on one line, separated by ';'
- variable substitution using "... $(name) ..." syntax
+- variable substitution using "... ${name} ..." syntax
 - special characters ('$', ';') can be escaped by prefixing with '\',
  for example:
-	setenv bootcmd bootm \$(address)
+	setenv bootcmd bootm \${address}
 - You can also escape text by enclosing in single apostrophes, for example:
 	setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'

@@ -3067,8 +3186,7 @@ Booting assumes that (the first part of) the image booted is a
 stage-2 loader which in turn loads and then invokes the kernel
 proper. Loader sources will eventually appear in the NetBSD source
 tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
-meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for
-details.
+meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz


 Implementation Internals:
@@ -3122,7 +3240,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in
@@ -3193,6 +3311,8 @@ On ARM, the following registers are used:

    ==> U-Boot will use R8 to hold a pointer to the global data

+NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
+or current versions of GCC may "optimize" the code too much.

 Memory Management:
 ------------------
@@ -3368,6 +3488,7 @@ Since the number of patches for U-Boot is growing, we need to
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.

+Patches shall be sent to the u-boot-users mailing list.

 When you send a patch, please include the following information with
 it:
@@ -3425,3 +3546,6 @@ Notes:
  (using #ifdef), and the resulting code with the new feature
  disabled must not need more memory than the old code without your
  modification.
+
+* Remember that there is a size limit of 40 kB per message on the
+  u-boot-users mailing list. Compression may help.
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__blackfin__
--- a/board/AtmarkTechno/suzaku/u-boot.lds
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@@ -51,6 +51,7 @@ SECTIONS

 	.u_boot_cmd ALIGN(0x4):
 	{
+		. = .;
 		__u_boot_cmd_start = .;
 		*(.u_boot_cmd)
 		__u_boot_cmd_end = .;
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include "asm/m5282.h"
+#include "VCxK.h"
+
+int checkboard (void)
+{
+	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+#if (TEXT_BASE ==  CFG_INT_FLASH_BASE)
+	puts ("       Boot from Internal FLASH\n");
+#endif
+
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	int size,i;
+
+	size = 0;
+	MCFSDRAMC_DCR =	MCFSDRAMC_DCR_RTIM_6
+			| MCFSDRAMC_DCR_RC((15 * CFG_CLK)>>4);
+	#ifdef CFG_SDRAM_BASE0
+
+		MCFSDRAMC_DACR0 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
+					| MCFSDRAMC_DACR_CASL(1)
+ 					| MCFSDRAMC_DACR_CBM(3)
+					| MCFSDRAMC_DACR_PS_16);
+
+		MCFSDRAMC_DMR0 =	MCFSDRAMC_DMR_BAM_16M
+					| MCFSDRAMC_DMR_V;
+
+		MCFSDRAMC_DACR0 |= 	MCFSDRAMC_DACR_IP;
+
+		*(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
+		MCFSDRAMC_DACR0 |=	MCFSDRAMC_DACR_RE;
+		for (i=0; i < 2000; i++)
+			asm(" nop");
+		mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0)
+								    | MCFSDRAMC_DACR_IMRS);
+		*(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
+		size += CFG_SDRAM_SIZE * 1024 * 1024;
+	#endif
+	#ifdef CFG_SDRAM_BASE1
+		MCFSDRAMC_DACR1 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
+					| MCFSDRAMC_DACR_CASL(1)
+ 					| MCFSDRAMC_DACR_CBM(3)
+					| MCFSDRAMC_DACR_PS_16;
+
+		MCFSDRAMC_DMR1 = 	MCFSDRAMC_DMR_BAM_16M
+					| MCFSDRAMC_DMR_V;
+
+		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_IP;
+
+		*(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5;
+		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_RE;
+		for (i=0; i < 2000; i++)
+			asm(" nop");
+		MCFSDRAMC_DACR1 |= 	MCFSDRAMC_DACR_IMRS;
+		*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
+		size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+	#endif
+	return size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+int misc_init_r(void)
+{
+	init_vcxk();
+	return 1;
+}
+
+/*---------------------------------------------------------------------------*/
+
+int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int rcode = 0;
+	ulong source;
+
+	switch (argc) {
+	case 2:
+		source = simple_strtoul(argv[1],NULL,16);
+		vcxk_loadimage(source);
+		rcode = 0;
+		break;
+	default:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		rcode = 1;
+		break;
+	}
+	return rcode;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+	vcimage,	2,	0,	do_vcimage,
+	"vcimage - loads an image to Display\n",
+	"vcimage addr\n"
+);
+
+/* EOF EB+MCF-EV123c */
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/m5282.h>
+#include "VCxK.h"
+
+vu_char *vcxk_bws = (vu_char *)(CFG_CS3_BASE);
+#define VCXK_BWS vcxk_bws
+
+static ulong vcxk_driver;
+
+
+ulong search_vcxk_driver(void);
+void vcxk_cls(void);
+void vcxk_setbrightness(short brightness);
+int vcxk_request(void);
+int vcxk_acknowledge_wait(void);
+void vcxk_clear(void);
+
+int init_vcxk(void)
+{
+	VIDEO_Invert_CFG &= ~VIDEO_Invert_IO;
+	VIDEO_INVERT_PORT |= VIDEO_INVERT_PIN;
+	VIDEO_INVERT_DDR  |= VIDEO_INVERT_PIN;
+
+	VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
+	VIDEO_REQUEST_DDR |= VIDEO_REQUEST_PIN;
+
+	VIDEO_ACKNOWLEDGE_DDR &= ~VIDEO_ACKNOWLEDGE_PIN;
+
+	vcxk_driver = search_vcxk_driver();
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		vcxk_cls();
+		vcxk_cls();
+		vcxk_setbrightness(1000);
+	}
+	VIDEO_ENABLE_DDR |= VIDEO_ENABLE_PIN;
+	VIDEO_ENABLE_PORT |= VIDEO_ENABLE_PIN;
+	VIDEO_ENABLE_PORT &= ~VIDEO_ENABLE_PIN;
+	return 1;
+}
+
+void 	vcxk_loadimage(ulong source)
+{
+	int cnt;
+	vcxk_acknowledge_wait();
+	for (cnt=0; cnt<16384; cnt++)
+	{
+		VCXK_BWS[cnt*2] = (*(vu_char*) source);
+		source++;
+	}
+	vcxk_request();
+}
+
+void vcxk_cls(void)
+{
+	vcxk_acknowledge_wait();
+	vcxk_clear();
+	vcxk_request();
+}
+
+void vcxk_clear(void)
+{
+	int cnt;
+	for (cnt=0; cnt<16384; cnt++)
+	{
+		VCXK_BWS[cnt*2] = 0x00;
+	}
+}
+
+void vcxk_setbrightness(short brightness)
+{
+	VCXK_BWS[0x8000]=(brightness >> 4) +2;
+	VCXK_BWS[0xC000]= (brightness + 23) >> 8;
+	VCXK_BWS[0xC001]= (brightness + 23) & 0xFF;
+}
+
+int vcxk_request(void)
+{
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		VIDEO_REQUEST_PORT &= ~VIDEO_REQUEST_PIN;
+		VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
+	}
+	return 1;
+}
+
+int vcxk_acknowledge_wait(void)
+{
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		while (!(VIDEO_ACKNOWLEDGE_PORT & VIDEO_ACKNOWLEDGE_PIN));
+	}
+	return 1;
+}
+
+ulong search_vcxk_driver(void)
+{
+	return 0;
+}
+
+/* eof */
--- a/board/BuS/EB+MCF-EV123/VCxK.h
+++ b/board/BuS/EB+MCF-EV123/VCxK.h
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VCXK_H_
+#define __VCXK_H_
+
+extern int init_vcxk(void);
+void 	vcxk_loadimage(ulong source);
+
+#define VIDEO_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
+#define VIDEO_ACKNOWLEDGE_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_ACKNOWLEDGE_PIN	0x0001
+
+#define VIDEO_ENABLE_PORT    	MCFGPTB_GPTPORT
+#define VIDEO_ENABLE_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_ENABLE_PIN	0x0002
+
+#define VIDEO_REQUEST_PORT   	MCFGPTB_GPTPORT
+#define VIDEO_REQUEST_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_REQUEST_PIN	0x0004
+
+#define VIDEO_Invert_CFG	MCFGPIO_PEPAR
+#define VIDEO_Invert_IO		MCFGPIO_PEPAR_PEPA2
+#define VIDEO_INVERT_PORT   	MCFGPIO_PORTE
+#define VIDEO_INVERT_DDR 	MCFGPIO_DDRE
+#define VIDEO_INVERT_PIN	MCFGPIO_PORT2
+
+#endif
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -0,0 +1,212 @@
+/*
+ * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/m5282.h>
+#include  "cfm_flash.h"
+
+#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
+
+#if (CFG_CLK>20000000)
+	#define CFM_CLK  (((long) CFG_CLK / (400000 * 8) + 1) | 0x40)
+#else
+	#define CFM_CLK  ((long) CFG_CLK / 400000 + 1)
+#endif
+
+#define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
+					 (CFG_MBAR & 0xC0000000))
+
+void cfm_flash_print_info (flash_info_t * info)
+{
+	printf ("Freescale: ");
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
+		printf ("MCF5281 internal FLASH\n");
+		break;
+	case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
+		printf ("MCF5282 internal FLASH\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+}
+
+void cfm_flash_init (flash_info_t * info)
+{
+	int sector;
+	ulong protection;
+	MCFCFM_MCR = 0;
+	MCFCFM_CLKD = CFM_CLK;
+	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
+	 	CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+		CFG_CLK);
+	MCFCFM_SACC = 0;
+	MCFCFM_DACC = 0;
+
+	if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
+		puts("CFM backdoor access is enabled\n");
+	if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
+		puts("CFM securety is enabled\n");
+
+	#ifdef CONFIG_M5281
+		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
+				 (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
+		info->size = 256*1024;
+		info->sector_count = 16;
+	#else
+		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
+				 (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
+		info->size = 512*1024;
+		info->sector_count = 32;
+	#endif
+	protection = MCFCFM_PROT;
+	for (sector = 0; sector < info->sector_count; sector++)
+	{
+		if (sector == 0)
+		{
+			info->start[sector] = CFG_INT_FLASH_BASE;
+		}
+		else
+		{
+			info->start[sector] = info->start[sector-1] + 0x04000;
+		}
+		info->protect[sector] = protection & 1;
+		protection >>= 1;
+	}
+}
+
+int cfm_flash_readycheck(int checkblank)
+{
+	int	rc;
+	unsigned char state;
+
+	rc	= ERR_OK;
+	while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
+	state = MCFCFM_USTAT;
+	if (state & MCFCFM_USTAT_ACCERR)
+	{
+		debug ("%s(): CFM access error",__FUNCTION__);
+		rc = ERR_PROG_ERROR;
+	}
+	if (state & MCFCFM_USTAT_PVIOL)
+	{
+		debug ("%s(): CFM protection violation",__FUNCTION__);
+		rc = ERR_PROTECTED;
+	}
+	if (checkblank)
+	{
+		if (!(state & MCFCFM_USTAT_BLANK))
+		{
+			debug ("%s(): CFM erras error",__FUNCTION__);
+			rc = ERR_NOT_ERASED;
+		}
+	}
+	MCFCFM_USTAT = state & 0x34; /* reset state */
+	return rc;
+}
+
+/* Erase 16KiB = 8 2KiB pages */
+
+int cfm_flash_erase_sector (flash_info_t * info, int sector)
+{
+	ulong address;
+	int page;
+	int rc;
+	rc= ERR_OK;
+	address = cmf_backdoor_address(info->start[sector]);
+	for (page=0; (page<8) && (rc==ERR_OK); page++)
+	{
+		*(volatile __u32*) address = 0;
+		MCFCFM_CMD = MCFCFM_CMD_PGERS;
+		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+		rc = cfm_flash_readycheck(0);
+		if (rc==ERR_OK)
+		{
+			*(volatile __u32*) address = 0;
+			MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
+			MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+			rc = cfm_flash_readycheck(1);
+		}
+		address += 0x800;
+	}
+	return rc;
+}
+
+int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+	ulong dest, data;
+
+	rc = ERR_OK;
+	if (addr & 3)
+	{
+		debug ("Byte and Word alignment not supported\n");
+		rc = ERR_ALIGN;
+	}
+	if (cnt & 3)
+	{
+		debug ("Byte and Word transfer not supported\n");
+		rc = ERR_ALIGN;
+	}
+	dest = cmf_backdoor_address(addr);
+	while ((cnt>=4) && (rc == ERR_OK))
+	{
+		data =*((volatile u32 *) src);
+		*(volatile u32*) dest = data;
+		MCFCFM_CMD = MCFCFM_CMD_PGM;
+		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+		rc = cfm_flash_readycheck(0);
+		if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
+		src +=4;
+		dest +=4;
+		addr +=4;
+		cnt -=4;
+	}
+	return rc;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+
+int cfm_flash_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+
+	rc= ERR_OK;
+	if (prot)
+	{
+		MCFCFM_PROT |= (1<<sector);
+		info->protect[sector]=1;
+	}
+	else
+	{
+		MCFCFM_PROT &= ~(1<<sector);
+		info->protect[sector]=0;
+	}
+	return rc;
+}
+
+#endif
+
+#endif
--- a/board/BuS/EB+MCF-EV123/cfm_flash.h
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.h
@@ -0,0 +1,40 @@
+/*
+ * Basic Flash Driver for Freescale MCF 5282 internal FLASH
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CFM_FLASH_H_
+#define __CFM_FLASH_H_
+
+#define	FREESCALE_MANUFACT 0xFACFFACF
+#define	FREESCALE_ID_MCF5281 0x5281
+#define	FREESCALE_ID_MCF5282 0x5282
+
+extern void cfm_flash_print_info (flash_info_t * info);
+extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
+extern void cfm_flash_init (flash_info_t * info);
+extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+#ifdef CFG_FLASH_PROTECTION
+extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
+#endif
+
+#endif
--- a/board/BuS/EB+MCF-EV123/config.mk
+++ b/board/BuS/EB+MCF-EV123/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/textbase.mk
+ifndef TEXT_BASE
+TEXT_BASE = 0xFE000000
+endif
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -0,0 +1,413 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * Based On
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include  "cfm_flash.h"
+
+#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define FLASH_BANK_SIZE 0x200000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (AMD_MANUFACT & FLASH_VENDMASK):
+		printf ("AMD: ");
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (AMD_ID_LV160B & FLASH_TYPEMASK):
+			printf ("AM29LV160B (16Bit)\n");
+			break;
+		default:
+			printf ("Unknown Chip Type\n");
+			break;
+		}
+		break;
+	case FREESCALE_MANUFACT & FLASH_VENDMASK:
+		cfm_flash_print_info (info);
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	puts ("  Size: ");
+	if ((info->size >> 20) > 0)
+	{
+		printf ("%ld MiB",info->size >> 20);
+	}
+	else
+	{
+		printf ("%ld KiB",info->size >> 10);
+	}
+	printf (" in %d Sectors\n", info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 4) == 0) {
+			printf ("\n    ");
+		}
+		printf ("%02d: %08lX%s  ", i,info->start[i],
+			info->protect[i] ? " P" : "  ");
+	}
+	printf ("\n\n");
+}
+
+unsigned long flash_init (void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		switch (i)
+		{
+		case 1:
+			flash_info[i].flash_id =
+				(AMD_MANUFACT & FLASH_VENDMASK) |
+				(AMD_ID_LV160B & FLASH_TYPEMASK);
+			flash_info[i].size = FLASH_BANK_SIZE;
+			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+			flashbase = PHYS_FLASH_1;
+			for (j = 0; j < flash_info[i].sector_count; j++) {
+				if (j == 0) {
+					/* 1st is 16 KiB */
+					flash_info[i].start[j] = flashbase;
+				}
+				if ((j >= 1) && (j <= 2)) {
+				/* 2nd and 3rd are 8 KiB */
+					flash_info[i].start[j] =
+						flashbase + 0x4000 + 0x2000 * (j - 1);
+				}
+				if (j == 3) {
+					/* 4th is 32 KiB */
+					flash_info[i].start[j] = flashbase + 0x8000;
+				}
+				if ((j >= 4) && (j <= 34)) {
+					/* rest is 256 KiB */
+					flash_info[i].start[j] =
+						flashbase + 0x10000 + 0x10000 * (j - 4);
+				}
+			}
+			break;
+		case 0:
+			cfm_flash_init (&flash_info[i]);
+			break;
+		default:
+			panic ("configured to many flash banks!\n");
+		}
+
+		size += flash_info[i].size;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + 0xffff, &flash_info[0]);
+
+	return size;
+}
+
+#define CMD_READ_ARRAY		0x00F0
+#define CMD_UNLOCK1		0x00AA
+#define CMD_UNLOCK2		0x0055
+#define CMD_ERASE_SETUP		0x0080
+#define CMD_ERASE_CONFIRM	0x0030
+#define CMD_PROGRAM		0x00A0
+#define CMD_UNLOCK_BYPASS	0x0020
+
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
+
+
+#define BIT_ERASE_DONE		0x0080
+#define BIT_RDY_MASK		0x0080
+#define BIT_PROGRAM_ERROR	0x0020
+#define BIT_TIMEOUT		0x80000000	/* our flag */
+
+#define ERR_READY -1
+
+int amd_flash_erase_sector(flash_info_t * info, int sector)
+{
+	int state;
+	ulong result;
+
+	volatile u16 *addr =
+				(volatile u16 *) (info->start[sector]);
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	*addr = CMD_ERASE_CONFIRM;
+
+	/* wait until flash is ready */
+	state = 0;
+	set_timer (0);
+
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+			state = ERR_TIMOUT;
+		}
+
+		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
+			state = ERR_READY;
+	}
+	while (!state);
+	if (state == ERR_READY)
+		state = ERR_OK;
+
+	MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+	return state;
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int iflag, cflag;
+	int sector;
+	int rc;
+
+	rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+	{
+		rc = ERR_UNKNOWN_FLASH_TYPE;
+	} /* (info->flash_id == FLASH_UNKNOWN) */
+
+	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
+	{
+		rc = ERR_INVAL;
+	}
+
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
+
+		if (info->protect[sector])
+		{
+			putc('P'); /*  protected sector will not erase */
+		}
+		else
+		{
+			/* erase on unprotected sector */
+			puts("E\b");
+			switch (info->flash_id & FLASH_VENDMASK)
+			{
+			case (AMD_MANUFACT & FLASH_VENDMASK):
+				rc = amd_flash_erase_sector(info,sector);
+				break;
+			case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+				rc = cfm_flash_erase_sector(info,sector);
+				break;
+			default:
+				return ERR_UNKNOWN_FLASH_VENDOR;
+			}
+			putc('.');
+		}
+	}
+	if (rc!=ERR_OK)
+	{
+		printf ("\n   ");
+		flash_perror (rc);
+	}
+	else
+	{
+		printf (" done\n");
+	}
+
+	udelay (10000);	/* allow flash to settle - wait 10 ms */
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+  		icache_enable ();
+
+	return rc;
+}
+
+volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
+{
+	volatile u16 *addr;
+	ulong result;
+	int cflag, iflag;
+	int state;
+
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
+	addr = (volatile u16 *) dest;
+
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	set_timer (0);
+
+	/* wait until flash is ready */
+	state = 0;
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+				state = ERR_TIMOUT;
+		}
+		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
+			state = ERR_READY;
+
+	} while (!state);
+
+	*addr = CMD_READ_ARRAY;
+
+	if (state == ERR_READY)
+		state = ERR_OK;
+	if ((*addr != data) && (state != ERR_TIMOUT))
+		state = ERR_PROG_ERROR;
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return state;
+}
+
+int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+	ulong dest;
+	u16 data;
+
+	rc = ERR_OK;
+	if (addr & 1)
+	{
+		debug ("Byte alignment not supported\n");
+		rc = ERR_ALIGN;
+	}
+	if (cnt & 1)
+	{
+		debug ("Byte transfer not supported\n");
+		rc = ERR_ALIGN;
+	}
+
+	dest = addr;
+	while ((cnt>=2) && (rc == ERR_OK))
+	{
+		data =*((volatile u16 *) src);
+		rc=amd_write_word (info,dest,data);
+		src +=2;
+		dest +=2;
+		cnt -=2;
+	}
+	return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case (AMD_MANUFACT & FLASH_VENDMASK):
+			rc = amd_flash_write_buff(info,src,addr,cnt);
+			break;
+		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+			rc = cfm_flash_write_buff(info,src,addr,cnt);
+			break;
+		default:
+			rc = ERR_UNKNOWN_FLASH_VENDOR;
+	}
+	return rc;
+
+}
+int amd_flash_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+	rc= ERR_OK;
+	if (prot)
+	{
+		info->protect[sector]=1;
+	}
+	else
+	{
+		info->protect[sector]=0;
+	}
+	return rc;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+
+int flash_real_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case (AMD_MANUFACT & FLASH_VENDMASK):
+			rc = amd_flash_protect(info,sector,prot);
+			break;
+		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+			rc = cfm_flash_protect(info,sector,prot);
+			break;
+		default:
+			rc = ERR_UNKNOWN_FLASH_VENDOR;
+	}
+	return rc;
+}
+
+#endif
--- a/board/BuS/EB+MCF-EV123/textbase.mk
+++ b/board/BuS/EB+MCF-EV123/textbase.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xF0000000
--- a/board/BuS/EB+MCF-EV123/u-boot.lds
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2000-2003
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
@@ -21,8 +21,8 @@
 * MA 02111-1307 USA
 */

-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
 /* Do we need any of these for elf?
   __DYNAMIC = 0;    */
 SECTIONS
@@ -56,12 +56,14 @@ SECTIONS
    /* WARNING - the following is hand-optimized to fit within	*/
    /* the sector layout of our flash chips!	XXX FIXME XXX	*/

-    mpc8xx/start.o	(.text)
+    cpu/mcf52x2/start.o	(.text)
    common/dlmalloc.o	(.text)
-    ppc/vsprintf.o	(.text)
-    ppc/crc32.o		(.text)
-    ppc/extable.o	(.text)
+    lib_generic/string.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o	(.text)
+    lib_generic/zlib.o	(.text)

+/*    . = env_offset; */
    common/environment.o(.text)

    *(.text)
@@ -80,12 +82,14 @@ SECTIONS
  .dtors     : { *(.dtors)   }

  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
+  . = (. + 0x00FF) & 0xFFFFFF00;
  _erotext = .;
  PROVIDE (erotext = .);
-  .reloc   :
+    .reloc   :
  {
+    __got_start = .;
    *(.got)
+    __got_end = .;
    _GOT2_TABLE_ = .;
    *(.got2)
    _FIXUP_TABLE_ = .;
@@ -110,25 +114,27 @@ SECTIONS
  .u_boot_cmd : { *(.u_boot_cmd) }
  __u_boot_cmd_end = .;

-
  __start___ex_table = .;
  __ex_table : { *(__ex_table) }
  __stop___ex_table = .;

-  . = ALIGN(4096);
+  . = ALIGN(256);
  __init_begin = .;
  .text.init : { *(.text.init) }
  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
+  . = ALIGN(256);
  __init_end = .;

  __bss_start = .;
  .bss       :
  {
+   _sbss = .;
   *(.sbss) *(.scommon)
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/LEOX/elpt860/README.LEOX
+++ b/board/LEOX/elpt860/README.LEOX
@@ -124,9 +124,9 @@ nfsserverip=192.168.0.1
 preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo
 gatewayip=192.168.0.1
 ramargs=setenv bootargs root=/dev/ram rw
-rootargs=setenv rootpath /tftp/$(ipaddr)
-nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsserverip):$(rootpath)
-addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsserverip):$(gatewayip):$(netmask):$(hostname):eth0:
+rootargs=setenv rootpath /tftp/${ipaddr}
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${nfsserverip}:${rootpath}
+addip=setenv bootargs ${bootargs} ip=${ipaddr}:${nfsserverip}:${gatewayip}:${netmask}:${hostname}:eth0:
 ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm
 nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm
 bootcmd=run ramboot
--- a/board/LEOX/elpt860/elpt860.c
+++ b/board/LEOX/elpt860/elpt860.c
@@ -169,7 +169,7 @@ int board_early_init_f (void)

 int checkboard (void)
 {
-	unsigned char *s = getenv ("serial#");
+	char *s = getenv ("serial#");

 	if (!s || strncmp (s, "ELPT860", 7))
 		printf ("### No HW ID - assuming ELPT860\n");
@@ -253,7 +253,7 @@ long int initdram (int board_type)
 	 * try 8 column mode
 	 */
 	size8 = dram_size (CFG_MAMR_8COL,
-			   (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);

 	udelay (1000);

@@ -261,7 +261,7 @@ long int initdram (int board_type)
 	 * try 9 column mode
 	 */
 	size9 = dram_size (CFG_MAMR_9COL,
-			   (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);

 	if (size8 < size9) {	/* leave configuration at 9 columns       */
 		size_b0 = size9;
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -91,6 +91,7 @@ SECTIONS
    *(.rodata)
    *(.rodata1)
    *(.rodata.str1.4)
+    *(.eh_frame)
  }
  .fini      : { *(.fini)    } =0
  .ctors     : { *(.ctors)   }
@@ -123,10 +124,12 @@ SECTIONS
  _edata  =  .;
  PROVIDE (edata = .);

+  . = .;
  __u_boot_cmd_start = .;
  .u_boot_cmd : { *(.u_boot_cmd) }
  __u_boot_cmd_end = .;

+  . = .;
  __start___ex_table = .;
  __ex_table : { *(__ex_table) }
  __stop___ex_table = .;
--- a/board/LEOX/elpt860/u-boot.lds.debug
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -83,6 +83,8 @@ SECTIONS
  {
    *(.rodata)
    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
  }
  .fini      : { *(.fini)    } =0
  .ctors     : { *(.ctors)   }
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -1,6 +1,7 @@
 /*
 * (C) Copyright 2002
 * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
+ * (C) Copyright 2006
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
@@ -88,8 +89,6 @@ long initdram (int board_type)

 void after_reloc (ulong dest_addr, gd_t *gd)
 {
-/* HJF:	DECLARE_GLOBAL_DATA_PTR; */
-
 	board_init_r (gd, dest_addr);
 }

--- a/board/MAI/AmigaOneG3SE/articiaS.c
+++ b/board/MAI/AmigaOneG3SE/articiaS.c
@@ -29,6 +29,8 @@
 #include "smbus.h"
 #include "via686.h"

+DECLARE_GLOBAL_DATA_PTR;
+
 #undef DEBUG

 struct dimm_bank {
@@ -82,7 +84,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte)

 long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks)
 {
-    DECLARE_GLOBAL_DATA_PTR;
 	int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR;
 	uint32 busclock = gd->bus_clk;
 	uint32 memclock = busclock;
@@ -394,8 +395,6 @@ uint32 burst_to_len (uint32 support)

 long articiaS_ram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	register uint32 i;
 	register uint32 value1;
 	register uint32 value2;
--- a/board/MAI/AmigaOneG3SE/articiaS_pci.c
+++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c
@@ -26,6 +26,8 @@
 #include "memio.h"
 #include "articiaS.h"

+DECLARE_GLOBAL_DATA_PTR;
+
 #undef ARTICIA_PCI_DEBUG

 #ifdef  ARTICIA_PCI_DEBUG
@@ -493,8 +495,6 @@ pci_dev_t video_dev;

 int articiaS_init_vga (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
    extern void shutdown_bios(void);
    pci_dev_t dev = ~0;
    int busnr = 0;
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -3,6 +3,7 @@
 #include "../disk/part_amiga.h"
 #include <asm/cache.h>

+DECLARE_GLOBAL_DATA_PTR;

 #undef BOOTA_DEBUG

@@ -108,8 +109,6 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

 	s = getenv ("autostart");
 	if (s && strcmp (s, "yes") == 0) {
-		DECLARE_GLOBAL_DATA_PTR;
-
 		void (*boot) (bd_t *, char *, block_dev_desc_t *);
 		char *args;

--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@@ -656,7 +656,7 @@ char * kbd_initialize(void)
 			      | KBD_MODE_DISABLE_MOUSE
 			      | KBD_MODE_KCC);

-	/* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+	/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
 	kbd_write_command_w(KBD_CCMD_READ_MODE);
 	if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
 		/*
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -4,6 +4,8 @@
 #include "memio.h"
 #include "articiaS.h"

+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_NS16550
 static uint32 ComPort1;

@@ -150,8 +152,6 @@ const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2;

 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint32 clock_divisor = 115200 / gd->baudrate;

 	NS16550_init (Com0, clock_divisor);
@@ -239,8 +239,6 @@ void serial_puts (const char *string)

 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint32 clock_divisor = 115200 / gd->baudrate;

 	NS16550_init (Com0, clock_divisor);
--- a/board/MAI/AmigaOneG3SE/u-boot.lds
+++ b/board/MAI/AmigaOneG3SE/u-boot.lds
@@ -76,6 +76,7 @@ SECTIONS
    *(.rodata)
    *(.rodata1)
    *(.rodata.str1.4)
+    *(.eh_frame)
  }
  .fini      : { *(.fini)    } =0
  .ctors     : { *(.ctors)   }
@@ -108,11 +109,13 @@ SECTIONS
  _edata  =  .;
  PROVIDE (edata = .);

+  . = .;
  __u_boot_cmd_start = .;
  .u_boot_cmd : { *(.u_boot_cmd) }
  __u_boot_cmd_end = .;


+  . = .;
  __start___ex_table = .;
  __ex_table : { *(__ex_table) }
  __stop___ex_table = .;
--- a/board/MAI/AmigaOneG3SE/via686.c
+++ b/board/MAI/AmigaOneG3SE/via686.c
@@ -28,6 +28,8 @@
 #include "via686.h"
 #include "i8259.h"

+DECLARE_GLOBAL_DATA_PTR;
+
 #undef VIA_DEBUG

 #ifdef  VIA_DEBUG
@@ -226,33 +228,31 @@ __asm         ("    .globl via_calibrate_time_base \n"

 extern unsigned long via_calibrate_time_base(void);

-void via_calibrate_bus_freq(void)
+void via_calibrate_bus_freq (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
+	unsigned long tb;

-    unsigned long tb;
+	/* This is 20 microseconds */
+#define CALIBRATE_TIME 28636

-    /* This is 20 microseconds */
-    #define CALIBRATE_TIME 28636
+	/* Enable the timer (and disable speaker) */
+	unsigned char c;

+	c = in_byte (0x61);
+	out_byte (0x61, ((c & ~0x02) | 0x01));

-    /* Enable the timer (and disable speaker) */
-    unsigned char c;
-    c = in_byte(0x61);
-    out_byte(0x61, ((c & ~0x02) | 0x01));
+	/* Set timer 2 to low/high writing */
+	out_byte (0x43, 0xb0);
+	out_byte (0x42, CALIBRATE_TIME & 0xff);
+	out_byte (0x42, CALIBRATE_TIME >> 8);

-    /* Set timer 2 to low/high writing */
-    out_byte(0x43, 0xb0);
-    out_byte(0x42, CALIBRATE_TIME & 0xff);
-    out_byte(0x42, CALIBRATE_TIME >>8);
+	/* Read the time base */
+	tb = via_calibrate_time_base ();

-    /* Read the time base */
-    tb = via_calibrate_time_base();
-
-    if (tb >= 700000)
-	gd->bus_clk = 133333333;
-    else
-	gd->bus_clk = 100000000;
+	if (tb >= 700000)
+		gd->bus_clk = 133333333;
+	else
+		gd->bus_clk = 100000000;

 }

--- a/board/MAI/AmigaOneG3SE/video.c
+++ b/board/MAI/AmigaOneG3SE/video.c
@@ -26,6 +26,8 @@
 #include "memio.h"
 #include <part.h>

+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned char *cursor_position;
 unsigned int cursor_row;
 unsigned int cursor_col;
@@ -480,7 +482,6 @@ extern char version_string[];
 void video_banner(void)
 {
    block_dev_desc_t *ide;
-    DECLARE_GLOBAL_DATA_PTR;
    int i;
    char *s;
    int maxdev;
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/dmake
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_cp
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_echo
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/k_rm
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/makedep
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/nasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/ndisasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans
+++ b/board/MAI/bios_emulator/scitech/bin-linux/glibc/trans
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/dmake
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/nasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/ndisasm
--- a/board/MAI/bios_emulator/scitech/bin-linux/libc/trans
+++ b/board/MAI/bios_emulator/scitech/bin-linux/libc/trans
--- a/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc31-d16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-c32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-d16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-d32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-snp.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-w16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc45-w32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-c32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-d16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-d32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-smx.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-snp.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-w16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-w32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bc50-x11.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat
--- a/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat
+++ b/board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat
--- a/board/MAI/bios_emulator/scitech/bin/build
+++ b/board/MAI/bios_emulator/scitech/bin/build
--- a/board/MAI/bios_emulator/scitech/bin/build.bat
+++ b/board/MAI/bios_emulator/scitech/bin/build.bat
--- a/board/MAI/bios_emulator/scitech/bin/build_db.bat
+++ b/board/MAI/bios_emulator/scitech/bin/build_db.bat
--- a/board/MAI/bios_emulator/scitech/bin/build_it.bat
+++ b/board/MAI/bios_emulator/scitech/bin/build_it.bat
--- a/board/MAI/bios_emulator/scitech/bin/cddrv.bat
+++ b/board/MAI/bios_emulator/scitech/bin/cddrv.bat
--- a/board/MAI/bios_emulator/scitech/bin/cdit
+++ b/board/MAI/bios_emulator/scitech/bin/cdit
--- a/board/MAI/bios_emulator/scitech/bin/cdit.bat
+++ b/board/MAI/bios_emulator/scitech/bin/cdit.bat
--- a/board/MAI/bios_emulator/scitech/bin/findint3.bat
+++ b/board/MAI/bios_emulator/scitech/bin/findint3.bat
--- a/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh
+++ b/board/MAI/bios_emulator/scitech/bin/gcc-beos.sh
--- a/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh
+++ b/board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh
--- a/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh
+++ b/board/MAI/bios_emulator/scitech/bin/gcc-linux.sh
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat
--- a/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat
--- a/board/MAI/bios_emulator/scitech/bin/makelib.bat
+++ b/board/MAI/bios_emulator/scitech/bin/makelib.bat
--- a/board/MAI/bios_emulator/scitech/bin/meltobjs.sh
+++ b/board/MAI/bios_emulator/scitech/bin/meltobjs.sh
--- a/board/MAI/bios_emulator/scitech/bin/ntddk.bat
+++ b/board/MAI/bios_emulator/scitech/bin/ntddk.bat
--- a/board/MAI/bios_emulator/scitech/bin/qnx4.sh
+++ b/board/MAI/bios_emulator/scitech/bin/qnx4.sh
--- a/board/MAI/bios_emulator/scitech/bin/qnxnto.sh
+++ b/board/MAI/bios_emulator/scitech/bin/qnxnto.sh
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh
--- a/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh
--- a/board/MAI/bios_emulator/scitech/bin/set-vars.bat
+++ b/board/MAI/bios_emulator/scitech/bin/set-vars.bat
--- a/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat
+++ b/board/MAI/bios_emulator/scitech/bin/vc40-c32.bat
--- a/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat
+++ b/board/MAI/bios_emulator/scitech/bin/vc40-d16.bat
--- a/Show More
+++ b/Show More