Code cleanup

* Disable MPC5200 bus pipelining as workaround for bus contention
* Fix timeout problems with 1st packet on MPC5200
2026-06-13 15:03:58 +03:00 · 2003-09-16 21:07:28 +00:00 · 2003-09-16 17:35:37 +00:00 · 2003-09-16 17:29:31 +00:00 · 2003-09-16 17:20:34 +00:00 · 2003-09-16 17:06:05 +00:00
429 changed files with 91756 additions and 10555 deletions
--- a/293
+++ b/293
@@ -1,9 +1,296 @@
+======================================================================
+Changes for U-Boot 1.0.0:
+======================================================================
+
+* disable MPC5200 bus pipelining as workaround for bus contention
+
+* Modify XLB arbiter priorities on MPC5200 so all devices use same
+  priority; configure critical interrupts to be handled like external
+  interrupts
+
+* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
+  go back to 66 MHz for stability
+
+* Patches by Jon Diekema, 15 Sep 2003:
+  - add description for missing CFG_CMD_* entries in the README file
+  - sacsng tweaks
+
+* Patch by Gleb Natapov, 14 Sep 2003:
+  enable watchdog support for all MPC824x boards that have a watchdog
+
+* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
+  "Non-octet Aligned Frame" errors we see at 100 Mbps
+
+* Patch by Sharad Gupta, 14 Sep 2003:
+  fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
+
+* Patch by llandre, 11 Sep 2003:
+  update configuration for PPChameleonEVB board
+
+* Patch by David Müller, 13 Sep 2003:
+  various changes to VCMA9 board specific files
+
+* Add I2C support for MGT5100 / MPC5200
+
+* Patch by Rune Torgersen, 11 Sep 2003:
+  Changed default memory option on MPC8266ADS to NOT be Page Based
+  Interleave, since this doesn't work very well with the standard
+  16MB DIMM
+
+* Patch by George G. Davis, 12 Sep 2003:
+  fix Makefile settings for sk98 driver
+
+* Patch by Stefan Roese, 12 Sep 2003:
+  - new boards added: DP405, HUB405, PLU405, VOH405
+  - some esd boards updated
+  - cpu/ppc4xx/sdram.c: disable memory controller before setting
+    first values
+  - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
+
+* Patch by Martin Krause, 11 Sep 2003:
+  add burn-in tests for TRAB board
+
+* Enable instruction cache on MPC5200 board
+
+* Patch by Denis Peter, 11 Sep 2003:
+  - fix USB data pointer assignment for bulk only transfer.
+  - prevent to display erased directories in FAT filesystem.
+
+* Change output format for NAND flash - make it look like for other
+  memory, too
+
+======================================================================
+Changes for U-Boot 0.4.8:
+======================================================================
+
+* Patches by Denis Peter, 9 Sep 2003:
+  add FAT support for IDE, SCSI and USB
+
+* Patches by Gleb Natapov, 2 Sep 2003:
+  - cleanup of POST code for unsupported architectures
+  - MPC824x locks way0 of data cache for use as initial RAM;
+    this patch unlocks it after relocation to RAM and invalidates
+    the locked entries.
+
+* Patch by Gleb Natapov, 30 Aug 2003:
+  new I2C driver for mpc107 bridge. Now works from flash.
+
+* Patch by Dave Ellis, 11 Aug 2003:
+  - JFFS2: fix typo in common/cmd_jffs2.c
+  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
+  - JFFS2: remove node version 0 warning
+  - JFFS2: accept JFFS2 PADDING nodes
+  - SXNI855T: add AM29LV800 support
+  - SXNI855T: move environment from EEPROM to flash
+  - SXNI855T: boot from JFFS2 in NOR or NAND flash
+
+* Patch by Bill Hargen, 11 Aug 2003:
+  fixes for I2C on MPC8240
+  - fix i2c_write routine
+  - fix iprobe command
+  - eliminates use of global variables, plus dead code, cleanup.
+
+* Add support for USB Mass Storage Devices (BBB)
+  (tested with USB memory sticks only)
+
+* Avoid flicker on TRAB's VFD
+
+* Add support for SK98xx driver
+
+* Add PCI support for SL8245 board
+
+* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
+  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
+  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
+
+* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
+  to allow for more accurate baudrate settings
+  (error now 0.7% at 115 kbps, instead of 3.5% before)
+
+* Patch by Andreas Mohr, 4 Sep 2003:
+  Fix a lot of spelling errors
+
+* Add support for PPChameleon Eval Board
+
+* Add support for P3G4 board
+
+* Fix problem with MGT5100 FEC driver: add "early" MAC address
+  initialization
+
+* Patch by Yuli Barcohen, 7 Aug 2003:
+  check BCSR to detect if the board is configured in PCI mode
+
+======================================================================
+Changes for U-Boot 0.4.7:
+======================================================================
+
+* Patch by Raghu Krishnaprasad, 7 Aug 2003:
+  add support for Adder II MPC852T module
+
+* Patch by George G. Davis, 19 Aug 2003:
+  fix TI Innovator/OMAP1510 pin configs
+
+* Patches by Kshitij, 18 Aug 2003
+  - add support for arm926ejs cpu core
+  - add support for TI OMAP 1610 Innovator Board
+
+* Patch by Yuli Barcohen, 14 Aug 2003:
+  add support for bzip2 uncompression
+
+* Add GCC library to examples/Makefile so GCC utility functions will
+  be resolved, too
+
+* Add I2C and RTC support for RMU board using software I2C driver
+  (because of better response to iprobe command); fix problem with
+  "reset" command
+
+* Patch by Matthias Fuchs, 28 Aug 2003:
+  Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
+  CONFIG_BOOTP_MAKS (see README).
+
+* Fix ICU862 environment problem
+
+* Fix RAM size detection for RMU board
+
+* Implement "reset" for MGT5100/MPC5200 systems
+
+======================================================================
+Changes for U-Boot 0.4.6:
+======================================================================
+
+* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
+  allow selection of clock frequency as "make" target
+
+* Implement memory autosizing code for IceCube boards
+
+* Configure network port on INCA-IP for autonegotiation
+
+* Fix overflow problem in network timeout code
+
+* Patch by Richard Woodruff, 8 Aug 2003:
+  Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
+
+======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
+
+* Update for TQM board defaults:
+  disable clocks_in_mhz, enable boot count limit
+
+* Removed tools/gdb from "make all" target.  Added make target "gdbtools"
+  in toplevel directory instead.  Removed astest.c from tools/gdb because
+  it is no longer relevant.
+
+* Fix PCI support for MPC5200 / IceCube Board
+
+* Map ISP1362 USB OTG controller for NSCU board
+
+* Patch by Brad Parker, 02 Aug 2003:
+  fix sc520_cdp problems
+
+* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
+
+* Allow erase command to cross flash bank boundaries
+
+* Patch by Scott McNutt, 21 Jul 2003:
+  Add support for LynuxWorks Kernel Downloadable Images (KDIs).
+  Both LynxOS and BlueCat linux KDIs are supported.
+
+* Patch by Richard Woodruff, 25 Jul 2003:
+  use more reliable reset for OMAP/925T
+
+* Patch by Nye Liu, 25 Jul 2003:
+  fix typo in mpc8xx.h
+
+* Patch by Richard Woodruff, 24 Jul 2003:
+  Fixes for cmd_nand.c:
+  - Fixed null dereferece which could result in incorrect ECC values.
+  - Added support for devices with no Ready/Busy signal hooked up.
+  - Added OMAP1510 read/write protect handling.
+  - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
+    for non-JFFS2.
+  - Switched default ECC to be JFFS2.
+
+* Allow crc32 to be used at address 0x000
+
+* Provide consistent interface to standalone applications to access
+  the 'global_data' structure
+  Provide a doc/README.standalone more useful to users/developers.
+
+* Make IceCube MGT5100 FEC driver work
+
+* Implement new mechanism to export U-Boot's functions to standalone
+  applications: instead of using (PPC-specific) system calls we now
+  use a jump table; please see doc/README.standalone for details
+
+* Patch by Dave Westwood, 24 Jul 2003:
+  added support for Unity OS (a proprietary OS)
+
+* Patch by Detlev Zundel, 23 Jul 2003:
+  add "imls" command to print flash table of contents
+
+* Fix cold boot detection for log buffer reset
+
+* Return error for invalid length specifiers with "cp.X" etc.
+
+* Fix startup problem on MIPS
+
+* Allow for CONFIG_SPLASH_SCREEN even when no explicit
+  bitmap support is configured
+
+* Patch by Bill Hargen, 18 Jul 2003:
+  - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
+
+* Patch by Denis Peter, 18 Jul 2003:
+  - fix memory configuration for MIP405T
+  - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
+
+* Cleanup of TQM82xx configurations; use "official" board types
+  to make selection easier.
+
+* Patch by Martin Krause, 17 Jul 2003:
+  add delay to get I2C working with "imm" command and s3c24x0_i2c.c
+
+* Patch by Richard Woodruff, 17 July 03:
+  - Fixed bug in OMAP1510 baud rate divisor settings.
+
+* Patch by Nye Liu, 16 July 2003:
+  MPC860FADS fixes:
+  - add MPC86xADS support (uses MPC86xADS.h)
+  - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
+    o PLPRCR changes
+    o BRG changes (EXTAL/XTAL restricted to 10MHz)
+    o don't trust gclk() software measurement by default, depend on
+      CONFIG_8xx_GCLK_FREQ
+  - add DRAM SIMM not installed detection
+  - use more "correct" SDRAM initialization sequence
+  - allow different SDRAM sizes (8xxADS has 8M)
+  - default DER is 0
+  - remove unused MAMR defines from FADS860T.h (all done in fads.c)
+  - rename MAMR/MBMR defines to be more consistent. Should eventually
+    be merged into MxMR to better reflect the PowerQUICC datasheet.
+
+* Patch by Yuli Barcohen, 16 Jul 2003:
+  support new Motorola PQ2FADS-ZU evaluation board which replaced
+  MPC8260ADS and MPC8266ADS
+
+======================================================================
+Changes for U-Boot 0.4.4:
+======================================================================
+
+* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
+
+* Add support for MGT5100 and MPC5200 processors
+
+* Patch by Lutz Dennig, 15 Jul 2003:
+  update for R360MPI board
+
 ======================================================================
 Changes for U-Boot 0.4.3:
 ======================================================================

 * Patches by Kshitij, 04 Jul 2003
-  - added support for arm925t cpu core 
+  - added support for arm925t cpu core
  - added support for TI OMAP 1510 Innovator Board

 * Patches by Martin Krause, 14 Jul 2003:
@@ -24,7 +311,7 @@ Changes for U-Boot 0.4.3:
  - Fix PCI config table for A3000
  - Fix iobase for natsemi.c
    (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
-	
+
 * Allow to enable "slow" POST routines by key press on power-on
 * Fix temperature dependend switching of LCD backlight on LWMON
 * Tweak output format for LWMON
@@ -73,7 +360,7 @@ Changes for U-Boot 0.4.1:
  - PIC on LWMON board needs delay after power-on
  - Add missing RSR definitions for MPC8xx
  - Improve log buffer handling: guarantee clean reset after power-on
-  - Add support for EXBITGEN board
+  - Add support for EXBITGEN board (aka "genie")
  - Add support for SL8245 board

 * Code cleanup:
--- a/6
+++ b/6
@@ -302,3 +302,9 @@ W: www.elinos.com
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA board support, ARTOS support.
+
+N: Raghu Krishnaprasad
+E: Raghu.Krishnaprasad@fci.com
+D: Support for Adder-II MPC852T evaluation board
+W: http://www.forcecomputers.com
+
--- a/14
+++ b/14
@@ -52,6 +52,8 @@ Wolfgang Denk <wd@denx.de>
 	FPS850L			MPC850
 	FPS860L			MPC860
 	ICU862			MPC862
+	IceCube_5100		MGT5100
+	IceCube_5200		MPC5200
 	IP860			MPC860
 	IVML24			MPC860
 	IVML24_128		MPC860
@@ -87,9 +89,12 @@ Wolfgang Denk <wd@denx.de>
 	TQM8255			MPC8255

 	CPU86			MPC8260
+	PM825			MPC8250
 	PM826			MPC8260
 	TQM8260			MPC8260

+	P3G4			MPC7410
+
 	PCIPPC2			MPC750
 	PCIPPC6			MPC750

@@ -103,6 +108,10 @@ Dave Ellis <DGE@sixnetio.com>

 	SXNI855T		MPC8xx

+Raghu Krishnaprasad <raghu.krishnaprasad@fci.com>
+
+	ADDERII			MPC852T
+
 Thomas Frieden <ThomasF@hyperion-entertainment.com>

 	AmigaOneG3SE		MPC7xx
@@ -191,11 +200,15 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
+	DP405			PPC405EP
 	DU405			PPC405GP
+	HUB405			PPC405EP
 	OCRTC			PPC405GP
 	ORSG			PPC405GP
 	PCI405			PPC405GP
+	PLU405			PPC405EP
 	PMC405			PPC405GP
+	VOH405			PPC405EP

 Peter De Schrijver <p2@mind.be>

@@ -276,6 +289,7 @@ Gary Jennejohn <gj@denx.de>

 Kshitij Gupta <kshitij@ti.com>
 	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS

 David Müller <d.mueller@elsoft.ch>

--- a/64
+++ b/64
@@ -18,25 +18,34 @@ LIST_5xx="	\
 	cmi_mpc5xx							\
 "

+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+
+LIST_5xxx="	\
+	IceCube_5100	IceCube_5200					\
+"
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################

 LIST_8xx="	\
-	ADS860		AMX860		c2mon		CCM		\
-	cogent_mpc8xx	ESTEEM192E	ETX094		ELPT860		\
-	FADS823		FADS850SAR	FADS860T	FLAGADM		\
-	FPS850L		GEN860T		GEN860T_SC	GENIETV		\
-	GTH		hermes		IAD210		ICU862_100MHz	\
-	IP860		IVML24		IVML24_128	IVML24_256	\
-	IVMS8		IVMS8_128	IVMS8_256	KUP4K           \
-	LANTEC	        lwmon   	MBX		MBX860T		\
-	MHPC		MVS1		NETVIA		NETVIA_V2	\
-	NX823		pcu_e		R360MPI		RBC823		\
-	rmu		RPXClassic	RPXlite		RRvision	\
-	SM850		SPD823TS	svm_sc8xx	SXNI855T	\
-	TOP860		TQM823L		TQM823L_LCD	TQM850L		\
-	TQM855L		TQM860L		v37				\
+	AdderII		ADS860		AMX860		c2mon		\
+	CCM		cogent_mpc8xx	ESTEEM192E	ETX094		\
+	ELPT860		FADS823		FADS850SAR	FADS860T	\
+	FLAGADM		FPS850L		GEN860T		GEN860T_SC	\
+	GENIETV		GTH		hermes		IAD210		\
+	ICU862_100MHz	IP860		IVML24		IVML24_128	\
+	IVML24_256	IVMS8		IVMS8_128	IVMS8_256	\
+	KUP4K           LANTEC	        lwmon   	MBX		\
+	MBX860T		MHPC		MPC86xADS	MVS1		\
+	NETVIA		NETVIA_V2	NX823		pcu_e		\
+	R360MPI		RBC823		rmu		RPXClassic	\
+	RPXlite		RRvision	SM850		SPD823TS	\
+	svm_sc8xx	SXNI855T	TOP860		TQM823L		\
+	TQM823L_LCD	TQM850L		TQM855L		TQM860L		\
+	v37								\
 "

 #########################################################################
@@ -45,12 +54,13 @@ LIST_8xx="	\

 LIST_4xx="	\
 	ADCIOP		AR405		ASH405          BUBINGA405EP    \
-        CANBT		CPCI405		CPCI4052 	CPCI405AB       \
+	CANBT		CPCI405		CPCI4052 	CPCI405AB       \
 	CPCI440         CPCIISER4	CRAYL1  	DASA_SIM	\
-        DU405    	EBONY           ERIC  		EXBITGEN	\
-	MIP405  	MIP405T		ML2		OCRTC		\
-	ORSG		PCI405		PIP405		PMC405          \
-	W7OLMC		W7OLMG          WALNUT405			\
+	DP405           DU405    	EBONY           ERIC  		\
+	EXBITGEN	HUB405          MIP405  	MIP405T		\
+	ML2		OCRTC		ORSG		PCI405		\
+	PIP405		PLU405          PMC405          PPChameleonEVB	\
+	VOH405          W7OLMC		W7OLMG          WALNUT405	\
 "

 #########################################################################
@@ -72,7 +82,7 @@ LIST_8260="	\
 	gw8260		hymod		IPHASE4539	MPC8260ADS	\
 	MPC8266ADS	PM826		ppmc8260	RPXsuper	\
 	rsdproto	sacsng		sbc8260		SCM		\
-	TQM8260								\
+	TQM8260_AC	TQM8260_AD	TQM8260_AE			\
 "

 #########################################################################
@@ -80,14 +90,16 @@ LIST_8260="	\
 #########################################################################

 LIST_74xx="	\
-	EVB64260	PCIPPC2		PCIPPC6		ZUMA		\
+	EVB64260	P3G4		PCIPPC2		PCIPPC6		\
+	ZUMA								\
 "

 LIST_7xx="	\
 	BAB7xx		ELPPC						\
 "

-LIST_ppc="${LIST_5xx}  ${LIST_8xx}  \
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
+	  ${LIST_8xx}  \
 	  ${LIST_824x} ${LIST_8260} \
 	  ${LIST_4xx}		    \
 	  ${LIST_74xx} ${LIST_7xx}"
@@ -108,7 +120,11 @@ LIST_ARM7="ep7312 impa7"
 ## ARM9 Systems
 #########################################################################

-LIST_ARM9="at91rm9200dk omap1510inn smdk2400 smdk2410 trab VCMA9"
+LIST_ARM9="	\
+	at91rm9200dk	omap1510inn	omap1610inn			\
+	smdk2400	smdk2410	trab				\
+	VCMA9								\
+"

 #########################################################################
 ## Xscale Systems
@@ -159,7 +175,7 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	5xx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
+	5xx|5xxx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
--- a/161
+++ b/161
@@ -76,6 +76,7 @@ export	CROSS_COMPILE

 # The "tools" are needed early, so put this first
 SUBDIRS	= tools \
+	  examples \
 	  lib_generic \
 	  lib_$(ARCH) \
 	  cpu/$(CPU) \
@@ -87,9 +88,9 @@ SUBDIRS	= tools \
 	  rtc \
 	  dtt \
 	  drivers \
+	  drivers/sk98lin \
 	  post \
-	  post/cpu \
-	  examples
+	  post/cpu

 #########################################################################
 # U-Boot objects....order is important (i.e. start must be first)
@@ -112,17 +113,19 @@ LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
 LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/cpu/libcpu.a
 LIBS += common/libcommon.a
 LIBS += lib_generic/libgeneric.a
+# Add GCC lib
+PLATFORM_LIBS += -L $(shell dirname `$(CC) -print-libgcc-file-name`) -lgcc

+#########################################################################
 #########################################################################

-all:		u-boot.srec u-boot.bin System.map
+ALL = u-boot.srec u-boot.bin System.map

-install:	all
-		-cp u-boot.bin /tftpboot/u-boot.bin
-		-cp u-boot.bin /net/denx/tftpboot/u-boot.bin
+all:		$(ALL)

 u-boot.srec:	u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
@@ -130,18 +133,28 @@ u-boot.srec:	u-boot
 u-boot.bin:	u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@

+u-boot.img:	u-boot.bin
+		./tools/mkimage -A $(ARCH) -T firmware -C none \
+		-a $(TEXT_BASE) -e 0 \
+		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
+			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
+		-d $< $@
+
 u-boot.dis:	u-boot
 		$(OBJDUMP) -d $< > $@

 u-boot:		depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT)
 		UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 		$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
-			--start-group $(LIBS) --end-group \
+			--start-group $(LIBS) $(PLATFORM_LIBS) --end-group \
 			-Map u-boot.map -o u-boot

 subdirs:
 		@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done

+gdbtools:
+		$(MAKE) -C tools/gdb || exit 1
+
 depend dep:
 		@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done

@@ -181,10 +194,29 @@ unconfig:
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi

+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+IceCube_5200_config	\
+IceCube_5100_config:		unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _5200,$@)" ] || \
+		{ echo "#define CONFIG_MPC5200"		>>include/config.h ; \
+		  echo "... with MPC5200 processor" ; \
+		}
+	@[ -z "$(findstring _5100,$@)" ] || \
+		{ echo "#define CONFIG_MGT5100"		>>include/config.h ; \
+		  echo "... with MGT5100 processor" ; \
+		}
+	@./mkconfig -a IceCube ppc mpc5xxx icecube
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################

+AdderII_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx adderII
+
 ADS860_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx fads

@@ -211,6 +243,7 @@ ETX094_config	:	unconfig

 FADS823_config	\
 FADS850SAR_config \
+MPC86xADS_config \
 FADS860T_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx fads

@@ -391,6 +424,12 @@ TQM860L_80MHz_config	\
 TQM862L_config		\
 TQM862L_66MHz_config	\
 TQM862L_80MHz_config	\
+TQM823M_config		\
+TQM823M_66MHz_config	\
+TQM823M_80MHz_config	\
+TQM850M_config		\
+TQM850M_66MHz_config	\
+TQM850M_80MHz_config	\
 TQM855M_config		\
 TQM855M_66MHz_config	\
 TQM855M_80MHz_config	\
@@ -468,6 +507,9 @@ CRAYL1_config:unconfig
 DASA_SIM_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd

+DP405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx dp405 esd
+
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd

@@ -480,6 +522,9 @@ ERIC_config:unconfig
 EXBITGEN_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx exbitgen

+HUB405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
+
 MIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl

@@ -501,9 +546,18 @@ PCI405_config:	unconfig
 PIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl

+PLU405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx plu405 esd
+
 PMC405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd

+PPChameleonEVB_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx PPChameleonEVB dave
+
+VOH405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
+
 W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
@@ -645,32 +699,48 @@ sbc8260_config:	unconfig
 SCM_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 SCM siemens

-TQM8255_config	\
-TQM8260_config	\
-TQM8260_L2_config	\
-TQM8255_266MHz_config	\
-TQM8260_266MHz_config	\
-TQM8260_L2_266MHz_config \
-TQM8255_300MHz_config	\
-TQM8260_300MHz_config:	unconfig
-	@ >include/config.h
-	@if [ "$(findstring _L2_,$@)" ] ; then \
+TQM8255_AA_config \
+TQM8260_AA_config \
+TQM8260_AB_config \
+TQM8260_AC_config \
+TQM8260_AD_config \
+TQM8260_AE_config \
+TQM8260_AF_config \
+TQM8260_AG_config \
+TQM8260_AH_config \
+TQM8265_AA_config:  unconfig
+	@case "$@" in \
+	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
+	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
+	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
+	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
+	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
+	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
+	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
+	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	esac; \
+	>include/config.h ; \
+	if [ "$${CTYPE}" != "MPC8260" ] ; then \
+		echo "#define CONFIG_$${CTYPE}"	>>include/config.h ; \
+	fi; \
+	echo "#define CONFIG_$${CFREQ}MHz"	>>include/config.h ; \
+	echo "... with $${CFREQ}MHz system clock" ; \
+	if [ "$${CACHE}" == "yes" ] ; then \
 		echo "#define CONFIG_L2_CACHE"	>>include/config.h ; \
-		echo "... with L2 Cache support (60x Bus Mode)" ; \
+		echo "... with L2 Cache support" ; \
 	else \
 		echo "#undef CONFIG_L2_CACHE"	>>include/config.h ; \
 		echo "... without L2 Cache support" ; \
+	fi; \
+	if [ "$${BMODE}" == "60x" ] ; then \
+		echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
+		echo "... with 60x Bus Mode" ; \
+	else \
+		echo "#undef CONFIG_BUSMODE_60x"  >>include/config.h ; \
+		echo "... without 60x Bus Mode" ; \
 	fi
-	@[ -z "$(findstring _266MHz,$@)" ] || \
-		{ echo "#define CONFIG_266MHz"	>>include/config.h ; \
-		  echo "... with 266MHz system clock" ; \
-		}
-	@[ -z "$(findstring _300MHz,$@)" ] || \
-		{ echo "#define CONFIG_300MHz"	>>include/config.h ; \
-		  echo "... with 300MHz system clock" ; \
-		}
-	@[ -z "$(findstring TQM8255_,$@)" ] || \
-		{ echo "#define CONFIG_MPC8255"	>>include/config.h ; }
 	@./mkconfig -a TQM8260 ppc mpc8260 tqm8260

 atc_config:	unconfig
@@ -700,6 +770,9 @@ BAB7xx_config: unconfig
 ELPPC_config: unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec

+P3G4_config: unconfig
+	@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
+
 #========================================================================
 # ARM
 #========================================================================
@@ -728,6 +801,9 @@ xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn

+omap1610inn_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm926ejs omap1610inn
+
 smdk2400_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2400

@@ -800,8 +876,30 @@ sc520_spunk_rel_config	:	unconfig
 ## MIPS32 4Kc
 #########################################################################

-incaip_config :		unconfig
-	@./mkconfig $(@:_config=) mips mips incaip
+xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
+
+incaip_100MHz_config	\
+incaip_133MHz_config	\
+incaip_150MHz_config	\
+incaip_config: unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _100MHz,$@)" ] || \
+		{ echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
+		  echo "... with 100MHz system clock" ; \
+		}
+	@[ -z "$(findstring _133MHz,$@)" ] || \
+		{ echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
+		  echo "... with 133MHz system clock" ; \
+		}
+	@[ -z "$(findstring _150MHz,$@)" ] || \
+		{ echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
+		  echo "... with 150MHz system clock" ; \
+		}
+	@./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
+
+#########################################################################
+## MIPS64 5Kc
+#########################################################################

 purple_config :		unconfig
 	@./mkconfig $(@:_config=) mips mips purple
@@ -823,6 +921,7 @@ clean:
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
+	rm -f board/trab/trab_fkt

 clobber:	clean
 	find . -type f \
@@ -831,7 +930,7 @@ clobber:	clean
 		| xargs rm -f
 	rm -f $(OBJS) *.bak tags TAGS
 	rm -fr *.*~
-	rm -f u-boot u-boot.bin u-boot.srec u-boot.map System.map
+	rm -f u-boot u-boot.map $(ALL)
 	rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
 	rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
 	rm -f include/asm/proc include/asm/arch include/asm
--- a/182
+++ b/182
@@ -119,12 +119,12 @@ U-Boot will always have a patchlevel of "0".
 Directory Hierarchy:
 ====================

- board		Board dependend files
- common	Misc architecture independend functions
+- board		Board dependent files
+- common	Misc architecture independent functions
 - cpu		CPU specific files
 - disk		Code for disk drive partition handling
 - doc		Documentation (don't expect too much)
- drivers	Common used device drivers
+- drivers	Commonly used device drivers
 - dtt		Digital Thermometer and Thermostat drivers
 - examples	Example code for standalone applications, etc.
 - include	Header Files
@@ -141,6 +141,7 @@ Directory Hierarchy:

 - cpu/74xx_7xx	Files specific to Motorola MPC74xx and 7xx CPUs
 - cpu/arm925t	Files specific to ARM	   925	   CPUs
+- cpu/arm926ejs	Files specific to ARM	926	CPUs
 - cpu/mpc5xx	Files specific to Motorola MPC5xx  CPUs
 - cpu/mpc8xx	Files specific to Motorola MPC8xx  CPUs
 - cpu/mpc824x	Files specific to Motorola MPC824x CPUs
@@ -197,17 +198,20 @@ Directory Hierarchy:
 - board/lwmon	Files specific to LWMON	     boards
 - board/mbx8xx	Files specific to MBX	     boards
 - board/mpc8260ads
-		Files specific to MMPC8260ADS boards
+		Files specific to MPC8260ADS and PQ2FADS-ZU boards
 - board/mpl/	Files specific to boards manufactured by MPL
 - board/mpl/common	Common files for MPL boards
 - board/mpl/pip405	Files specific to PIP405     boards
 - board/mpl/mip405	Files specific to MIP405     boards
+- board/mpl/vcma9	Files specific to VCMA9      boards
 - board/musenki	Files specific to MUSEKNI    boards
 - board/mvs1	Files specific to MVS1       boards
 - board/nx823   Files specific to NX823      boards
 - board/oxc	Files specific to OXC        boards
- board/omap1510inn  
+- board/omap1510inn
 		Files specific to OMAP 1510 Innovator boards
+- board/omap1610inn  
+		Files specific to OMAP 1610 Innovator boards
 - board/pcippc2	Files specific to PCIPPC2/PCIPPC6 boards
 - board/pm826	Files specific to PM826      boards
 - board/ppmc8260
@@ -303,6 +307,7 @@ The following options need to be configured:
 	or	CONFIG_MPC824X, CONFIG_MPC8260
 	or	CONFIG_IOP480
 	or	CONFIG_405GP
+	or	CONFIG_405EP
 	or	CONFIG_440
 	or	CONFIG_MPC74xx
 	or	CONFIG_750FX
@@ -357,9 +362,9 @@ The following options need to be configured:

 		CONFIG_HHP_CRADLE,  CONFIG_DNP1110,    CONFIG_EP7312,
 		CONFIG_IMPA7,       CONFIG_LART,       CONFIG_LUBBOCK,
-		CONFIG_INNOVATOROMAP1510,
+		CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610
 		CONFIG_SHANNON,     CONFIG_SMDK2400,   CONFIG_SMDK2410,
-		CONFIG_TRAB,	    CONFIG_AT91RM9200DK
+		CONFIG_TRAB,	    CONFIG_VCMA9,      CONFIG_AT91RM9200DK


 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -383,6 +388,14 @@ The following options need to be configured:
 					  the lcd display every second with
 					  a "rotator" |\-/|\-/

+- Board flavour: (if CONFIG_MPC8260ADS is defined)
+		CONFIG_ADSTYPE
+		Possible values are:
+			CFG_8260ADS	- original MPC8260ADS
+			CFG_8266ADS	- MPC8266ADS (untested)
+			CFG_PQ2FADS	- PQ2FADS-ZU
+
+
 - MPC824X Family Member (if CONFIG_MPC824X is defined)
 	Define exactly one of
 	CONFIG_MPC8240, CONFIG_MPC8245
@@ -560,13 +573,18 @@ The following options need to be configured:
 		#define enables commands:
 		-------------------------
 		CFG_CMD_ASKENV	* ask for env variable
+		CFG_CMD_AUTOSCRIPT Autoscript Support
 		CFG_CMD_BDI	  bdinfo
 		CFG_CMD_BEDBUG	  Include BedBug Debugger
+		CFG_CMD_BMP     * BMP support
 		CFG_CMD_BOOTD	  bootd
 		CFG_CMD_CACHE	  icache, dcache
 		CFG_CMD_CONSOLE	  coninfo
 		CFG_CMD_DATE	* support for RTC, date/time...
 		CFG_CMD_DHCP	  DHCP support
+		CFG_CMD_DIAG    * Diagnostics
+		CFG_CMD_DOC     * Disk-On-Chip Support
+		CFG_CMD_DTT       Digital Therm and Thermostat 
 		CFG_CMD_ECHO	* echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
 		CFG_CMD_ELF	  bootelf, bootvx
@@ -576,27 +594,37 @@ The following options need to be configured:
 		CFG_CMD_FDOS	* Dos diskette Support
 		CFG_CMD_FLASH	  flinfo, erase, protect
 		CFG_CMD_FPGA	  FPGA device initialization support
+		CFG_CMD_HWFLOW  * RTS/CTS hw flow control
 		CFG_CMD_I2C	* I2C serial bus support
 		CFG_CMD_IDE	* IDE harddisk support
 		CFG_CMD_IMI	  iminfo
+		CFG_CMD_IMLS      List all found images
 		CFG_CMD_IMMAP	* IMMR dump support
 		CFG_CMD_IRQ	* irqinfo
+		CFG_CMD_JFFS2   * JFFS2 Support
 		CFG_CMD_KGDB	* kgdb
 		CFG_CMD_LOADB	  loadb
 		CFG_CMD_LOADS	  loads
 		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
 				  loop, mtest
+		CFG_CMD_MISC      Misc functions like sleep etc
 		CFG_CMD_MMC	  MMC memory mapped support
 		CFG_CMD_MII	  MII utility commands
+		CFG_CMD_NAND    * NAND support
 		CFG_CMD_NET	  bootp, tftpboot, rarpboot
 		CFG_CMD_PCI	* pciinfo
 		CFG_CMD_PCMCIA	* PCMCIA support
+		CFG_CMD_PING    * send ICMP ECHO_REQUEST to network host
+		CFG_CMD_PORTIO    Port I/O
 		CFG_CMD_REGINFO * Register dump
 		CFG_CMD_RUN	  run command in env variable
+		CFG_CMD_SAVES     save S record dump
 		CFG_CMD_SCSI	* SCSI Support
+		CFG_CMD_SDRAM   * print SDRAM configuration information
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
+		CFG_CMD_VFD     * VFD support (TRAB)
 		CFG_CMD_BSP	* Board SPecific functions
 		-----------------------------------------------
 		CFG_CMD_ALL	all
@@ -632,7 +660,7 @@ The following options need to be configured:
 - Watchdog:
 		CONFIG_WATCHDOG
 		If this variable is defined, it enables watchdog
-		support. There must support in the platform specific
+		support. There must be support in the platform specific
 		code for a watchdog. For the 8xx and 8260 CPUs, the
 		SIU Watchdog feature is enabled in the SYPCR
 		register.
@@ -840,7 +868,7 @@ The following options need to be configured:
 		Normally display is black on white background; define
 		CFG_WHITE_ON_BLACK to get it inverted.

- Spash Screen Support: CONFIG_SPLASH_SCREEN
+- Splash Screen Support: CONFIG_SPLASH_SCREEN

 		If this option is set, the environment is checked for
 		a variable "splashimage". If found, the usual display
@@ -851,6 +879,16 @@ The following options need to be configured:
 		allows for a "silent" boot where a splash screen is
 		loaded very quickly after power-on.

+- Compression support:
+		CONFIG_BZIP2
+
+		If this option is set, support for bzip2 compressed
+		images is included. If not, only uncompressed and gzip
+		compressed images are supported.
+
+                NOTE: the bzip2 algorithm requires a lot of RAM, so
+                the malloc area (as defined by CFG_MALLOC_LEN) should
+                be at least 4MB.

 - Ethernet address:
 		CONFIG_ETHADDR
@@ -893,6 +931,29 @@ The following options need to be configured:
 		4th and following
 		BOOTP requests:		delay 0 ... 8 sec

+- DHCP Advanced Options:
+		CONFIG_BOOTP_MASK
+
+		You can fine tune the DHCP functionality by adding
+		these flags to the CONFIG_BOOTP_MASK define:
+
+		CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
+		serverip from a DHCP server, it is possible that more
+		than one DNS serverip is offered to the client.
+		If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS
+		serverip will be stored in the additional environment
+		variable "dnsip2". The first DNS serverip is always
+		stored in the variable "dnsip", when CONFIG_BOOTP_DNS
+		is added to the CONFIG_BOOTP_MASK.
+
+		CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable
+		to do a dynamic update of a DNS server. To do this, they
+		need the hostname of the DHCP requester.
+		If CONFIG_BOOP_SEND_HOSTNAME is added to the
+		CONFIG_BOOTP_MASK, the content of the "hostname"
+		environment variable is passed as option 12 to
+		the DHCP server.
+
 - Status LED:	CONFIG_STATUS_LED

 		Several configurations allow to display the current
@@ -913,35 +974,35 @@ The following options need to be configured:
 - I2C Support:	CONFIG_HARD_I2C | CONFIG_SOFT_I2C

 		These enable I2C serial bus commands. Defining either of
-		(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will 
-		include the appropriate I2C driver for the selected cpu. 
+		(but not both of) CONFIG_HARD_I2C or CONFIG_SOFT_I2C will
+		include the appropriate I2C driver for the selected cpu.

-		This will allow you to use i2c commands at the u-boot 
-		command line (as long as you set CFG_CMD_I2C in 
+		This will allow you to use i2c commands at the u-boot
+		command line (as long as you set CFG_CMD_I2C in
 		CONFIG_COMMANDS) and communicate with i2c based realtime
 		clock chips. See common/cmd_i2c.c for a description of the
 		command line interface.

-		CONFIG_HARD_I2C	selects the CPM hardware driver for I2C. 
+		CONFIG_HARD_I2C	selects the CPM hardware driver for I2C.

-		CONFIG_SOFT_I2C configures u-boot to use a software (aka 
+		CONFIG_SOFT_I2C configures u-boot to use a software (aka
 		bit-banging) driver instead of CPM or similar hardware
 		support for I2C.

-		There are several other quantities that must also be 
+		There are several other quantities that must also be
 		defined when you define CONFIG_HARD_I2C or CONFIG_SOFT_I2C.

 		In both cases you will need to define CFG_I2C_SPEED
-		to be the frequency (in Hz) at which you wish your i2c bus 
-		to run and CFG_I2C_SLAVE to be the address of this node (ie 
-		the cpu's i2c node address). 
-		
+		to be the frequency (in Hz) at which you wish your i2c bus
+		to run and CFG_I2C_SLAVE to be the address of this node (ie
+		the cpu's i2c node address).
+
 		Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
 		sets the cpu up as a master node and so its address should
 		therefore be cleared to 0 (See, eg, MPC823e User's Manual
-		p.16-473). So, set CFG_I2C_SLAVE to 0.  
+		p.16-473). So, set CFG_I2C_SLAVE to 0.

-		That's all that's required for CONFIG_HARD_I2C. 
+		That's all that's required for CONFIG_HARD_I2C.

 		If you use the software i2c interface (CONFIG_SOFT_I2C)
 		then the following macros need to be defined (examples are
@@ -989,8 +1050,8 @@ The following options need to be configured:
 		is FALSE, it clears it (low).

 		eg: #define I2C_SDA(bit) \
-		         if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
-		         else    immr->im_cpm.cp_pbdat &= ~PB_SDA
+			if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SDA

 		I2C_SCL(bit)

@@ -998,16 +1059,16 @@ The following options need to be configured:
 		is FALSE, it clears it (low).

 		eg: #define I2C_SCL(bit) \
-		         if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-		         else    immr->im_cpm.cp_pbdat &= ~PB_SCL 
+			if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else    immr->im_cpm.cp_pbdat &= ~PB_SCL

 		I2C_DELAY

 		This delay is invoked four times per clock cycle so this
 		controls the rate of data transfer.  The data rate thus
 		is 1 / (I2C_DELAY * 4). Often defined to be something
-		like: 
-		
+		like:
+
 		#define I2C_DELAY  udelay(2)

 		CFG_I2C_INIT_BOARD
@@ -1158,7 +1219,7 @@ The following options need to be configured:

 		U-Boot considers the values of the environment
 		variables "serial#" (Board Serial Number) and
-		"ethaddr" (Ethernet Address) to bb parameters that
+		"ethaddr" (Ethernet Address) to be parameters that
 		are set once by the board vendor / manufacturer, and
 		protects these variables from casual modification by
 		the user. Once set, these variables are read-only,
@@ -1273,7 +1334,7 @@ The following options need to be configured:

 		Define this to contain any number of null terminated
 		strings (variable = value pairs) that will be part of
-		the default enviroment compiled into the boot image.
+		the default environment compiled into the boot image.

 		For example, place something like this in your
 		board's config file:
@@ -1286,7 +1347,7 @@ The following options need to be configured:
 		internal format how the environment is stored by the
 		U-Boot code. This is NOT an official, exported
 		interface! Although it is unlikely that this format
-		will change soon, but there is no guarantee either.
+		will change soon, there is no guarantee either.
 		You better know what you are doing here.

 		Note: overly (ab)use of the default environment is
@@ -1687,9 +1748,10 @@ Low Level (hardware related) configuration options:

 - CFG_DEFAULT_IMMR:
 		Default address of the IMMR after system reset.
-		Needed on some 8260 systems (MPC8260ADS and RPXsuper)
-		to be able to adjust the position of the IMMR
-		register after a reset.
+
+                Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
+                and RPXsuper) to be able to adjust the position of
+                the IMMR register after a reset.

 - Floppy Disk Support:
 		CFG_FDC_DRIVE_NUMBER
@@ -1723,7 +1785,7 @@ Low Level (hardware related) configuration options:

 - CFG_INIT_RAM_ADDR:

-		Start address of memory area tha can be used for
+		Start address of memory area that can be used for
 		initial data and stack; please note that this must be
 		writable memory that is working WITHOUT special
 		initialization, i. e. you CANNOT use normal RAM which
@@ -1862,8 +1924,8 @@ configurations; the following names are supported:
    GENIETV_config	  TQM823L_config	PIP405_config
    GEN860T_config	  EBONY_config		FPS860L_config
    ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
-    at91rm9200dk_config	  omap1510inn_config	
-
+    at91rm9200dk_config	  omap1510inn_config	MPC8260ADS_config
+    omap1610inn_config
 Note: for some board special configuration names may exist; check  if
      additional  information is available from the board vendor; for
      instance, the TQM8xxL systems run normally at 50 MHz and use  a
@@ -1895,7 +1957,7 @@ Note: for some board special configuration names may exist; check  if


 Finally, type "make all", and you should get some working U-Boot
-images ready for downlod to / installation on your system:
+images ready for download to / installation on your system:

 - "u-boot.bin" is a raw binary image
 - "u-boot" is an image in ELF binary format
@@ -1914,7 +1976,7 @@ steps:
 1.  Add a new configuration option for your board to the toplevel
    "Makefile" and to the "MAKEALL" script, using the existing
    entries as examples. Note that here and at many other places
-    boards and other names are listed alphabetically sorted. Please
+    boards and other names are listed in alphabetical sort order. Please
    keep this order.
 2.  Create a new directory to hold your board specific code. Add any
    files you need. In your board directory, you will need at least
@@ -1944,7 +2006,7 @@ cation	did not break existing code. At least make sure that *ALL* of
 the supported boards compile WITHOUT ANY compiler warnings. To do so,
 just run the "MAKEALL" script, which will configure and build U-Boot
 for ALL supported system. Be warned, this will take a while. You  can
-select	which  (cross)	compiler  to use py passing a `CROSS_COMPILE'
+select	which  (cross)	compiler  to use by passing a `CROSS_COMPILE'
 environment variable to the script, i. e. to use the cross tools from
 MontaVista's Hard Hat Linux you can type

@@ -2071,10 +2133,10 @@ Some configuration options can be set using Environment Variables:
 		  does not overwrite the U-Boot stack and data).

 		  For instance, when you have a system with 16 MB
-		  RAM, and want to reseve 4 MB from use by Linux,
+		  RAM, and want to reserve 4 MB from use by Linux,
 		  you can do this by adding "mem=12M" to the value of
 		  the "bootargs" variable. However, now you must make
-		  sure, that the initrd image is placed in the first
+		  sure that the initrd image is placed in the first
 		  12 MB as well - this can be done with

 		  setenv initrd_high 00c00000
@@ -2109,6 +2171,7 @@ depending the information provided by your boot server:

  bootfile	- see above
  dnsip		- IP address of your Domain Name Server
+  dnsip2	- IP address of your secondary Domain Name Server
  gatewayip	- IP address of the Gateway (Router) to use
  hostname	- Target hostname
  ipaddr	- see above
@@ -2142,8 +2205,8 @@ only effect after the next boot (yes, that's just like Windoze :-).
 Command Line Parsing:
 =====================

-There are two different command line parsers available  with  U-Boot:
-the old "simple" one, and the much more pwerful "hush" shell:
+There are two different command line parsers available with U-Boot:
+the old "simple" one, and the much more powerful "hush" shell:

 Old, simple command line parser:
 --------------------------------
@@ -2184,9 +2247,9 @@ General rules:
 Note for Redundant Ethernet Interfaces:
 =======================================

-Some boards come with redundand ethernet interfaces; U-Boot supports
+Some boards come with redundant ethernet interfaces; U-Boot supports
 such configurations and is capable of automatic selection of a
-"working" interface when needed. MAC assignemnt works as follows:
+"working" interface when needed. MAC assignment works as follows:

 Network interfaces are numbered eth0, eth1, eth2, ... Corresponding
 MAC addresses can be stored in the environment as "ethaddr" (=>eth0),
@@ -2226,12 +2289,11 @@ defines the following image properties:
 * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
  4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
  LynxOS, pSOS, QNX, RTEMS, ARTOS;
-  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS).
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
 * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
  IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
  Currently supported: PowerPC).
-* Compression Type (Provisions for uncompressed, gzip, bzip2;
-  Currently supported: uncompressed, gzip).
+* Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point
 * Image Name
@@ -2246,21 +2308,21 @@ Linux Support:
 ==============

 Although U-Boot should support any OS or standalone application
-easily, Linux has always been in the focus during the design of
+easily, the main focus has always been on Linux during the design of
 U-Boot.

 U-Boot includes many features that so far have been part of some
 special "boot loader" code within the Linux kernel. Also, any
 "initrd" images to be used are no longer part of one big Linux image;
 instead, kernel and "initrd" are separate images. This implementation
-serves serveral purposes:
+serves several purposes:

 - the same features can be used for other OS or standalone
  applications (for instance: using compressed images to reduce the
  Flash memory footprint)

 - it becomes much easier to port new Linux kernel versions because
-  lots of low-level, hardware dependend stuff are done by U-Boot
+  lots of low-level, hardware dependent stuff are done by U-Boot

 - the same Linux kernel image can now be used with different "initrd"
  images; of course this also means that different kernel images can
@@ -2512,7 +2574,7 @@ parameters. You can check and modify this variable using the
 	...

 If you want to boot a Linux kernel with initial ram disk, you pass
-the memory addreses of both the kernel and the initrd image (PPBCOOT
+the memory addresses of both the kernel and the initrd image (PPBCOOT
 format!) to the "bootm" command:

 	=> imi 40100000 40200000
@@ -2692,7 +2754,7 @@ Hit 'q':
 Minicom warning:
 ================

-Over time, many people have reported problems when trying to used the
+Over time, many people have reported problems when trying to use the
 "minicom" terminal emulation program for serial download. I (wd)
 consider minicom to be broken, and recommend not to use it. Under
 Unix, I recommend to use C-Kermit for general purpose use (and
@@ -2760,7 +2822,7 @@ models provide on-chip memory (like the IMMR area on MPC8xx and
 MPC826x processors), on others (parts of) the data cache can be
 locked as (mis-) used as memory, etc.

-	Chris Hallinan posted a good summy of  these  issues  to  the
+	Chris Hallinan posted a good summary of  these  issues  to  the
 	u-boot-users mailing list:

 	Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)?
@@ -2806,9 +2868,9 @@ code for the initialization procedures:

 * Do not use any unitialized global data (or implicitely initialized
  as zero data - BSS segment) at all - this is undefined, initiali-
-  zation is performed later (when relocationg to RAM).
+  zation is performed later (when relocating to RAM).

-* Stack space is very limited. Avoid big data buffers or things  like
+* Stack space is very limited. Avoid big data buffers or things like
  that.

 Having only the stack as writable memory limits means we cannot use
@@ -2821,7 +2883,7 @@ the GCC compiler (Global Register Variables) to share the data: we
 place a pointer (gd) to the global data into a register which we
 reserve for this purpose.

-When chosing a register for such a purpose we are restricted  by  the
+When choosing a register for such a purpose we are restricted by the
 relevant  (E)ABI  specifications for the current architecture, and by
 GCC's implementation.

@@ -2911,7 +2973,7 @@ System Initialization:
 In the reset configuration, U-Boot starts at the reset entry point
 (on most PowerPC systens at address 0x00000100). Because of the reset
 configuration for CS0# this is a mirror of the onboard Flash memory.
-To be able to re-map memory U-Boot then jumps to it's link address.
+To be able to re-map memory U-Boot then jumps to its link address.
 To be able to implement the initialization code in C, a (small!)
 initial stack is set up in the internal Dual Ported RAM (in case CPUs
 which provide such a feature like MPC8xx or MPC8260), or in a locked
@@ -2927,7 +2989,7 @@ simple memory test is run that determines the size of the SDRAM
 banks.

 When there is more than one SDRAM bank, and the banks are of
-different size, the larger is mapped first. For equal size, the first
+different size, the largest is mapped first. For equal size, the first
 bank (CS2#) is mapped first. The first mapping is always for address
 0x00000000, with any additional banks following immediately to create
 contiguous memory starting from 0.
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -91,31 +91,31 @@ Done:
 */
 #ifndef CONFIG_PCI_PNP
 static struct pci_config_table pci_a3000_config_table[] = {
-        /* vendor, device, class */
-        /* bus, dev, func */
+	/* vendor, device, class */
+	/* bus, dev, func */
 	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID,
-	  PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	   /* dp83815 eth0 divice */
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	/* dp83815 eth0 divice */
 	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
 				       PCI_ENET0_MEMADDR,
 				       PCI_COMMAND_IO |
 				       PCI_COMMAND_MEMORY |
 				       PCI_COMMAND_MASTER }},
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_ANY_ID, 0x14, PCI_ANY_ID,         /* PCI slot1 */
+	  PCI_ANY_ID, 0x14, PCI_ANY_ID,		/* PCI slot1 */
 	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
 				       PCI_ENET1_MEMADDR,
 				       PCI_COMMAND_IO |
 				       PCI_COMMAND_MEMORY |
 				       PCI_COMMAND_MASTER }},
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_ANY_ID, 0x15, PCI_ANY_ID,         /* PCI slot2 */
+	  PCI_ANY_ID, 0x15, PCI_ANY_ID, 	/* PCI slot2 */
 	  pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
 				       PCI_ENET2_MEMADDR,
 				       PCI_COMMAND_IO |
 				       PCI_COMMAND_MEMORY |
 				       PCI_COMMAND_MASTER }},
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-        PCI_ANY_ID, 0x16, PCI_ANY_ID,         /* PCI slot3 */
+	  PCI_ANY_ID, 0x16, PCI_ANY_ID,		/* PCI slot3 */
 	  pci_cfgfunc_config_device, { PCI_ENET3_IOADDR,
 				       PCI_ENET3_MEMADDR,
 				       PCI_COMMAND_IO |
--- a/board/adderII/Makefile
+++ b/board/adderII/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/adderII/adderII.c
+++ b/board/adderII/adderII.c
@@ -0,0 +1,189 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard( void )
+{
+	puts("Board: ");
+	puts("AdderII(MPC852T)\n" );
+
+  	return 0;
+}
+
+#if defined( CONFIG_SDRAM_50MHZ )
+
+/******************************************************************************
+** for chip Samsung K4S643232F - T70
+** this table is for 32-50MHz operation
+*******************************************************************************/
+
+#define SDRAM_MPTPRVALUE 	0x0200
+
+#define SDRAM_MAMRVALUE0 	0x00802114   /* refresh at 32MHz */
+#define SDRAM_MAMRVALUE1 	0x00802118
+
+#define SDRAM_OR1VALUE   	0xff800e00
+#define SDRAM_BR1VALUE   	0x00000081
+
+#define SDRAM_MARVALUE		94
+
+#define SDRAM_MCRVALUE0  	0x80808105
+#define SDRAM_MCRVALUE1  	0x80808130
+
+const uint sdram_table[] = {
+
+	/* single read   (offset 0x00 in upm ram) */
+       	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
+       	0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
+
+	/* burst read    (offset 0x08 in upm ram) */
+       	0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
+       	0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
+       	0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
+       	0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
+
+	/* single write  (offset 0x18 in upm ram) */
+       	0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
+       	0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* burst write   (offset 0x20 in upm ram) */
+       	0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+       	0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
+       	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+       	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* refresh       (offset 0x30 in upm ram) */
+       	0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+       	0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
+       	0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+	/* exception     (offset 0x3C in upm ram) */
+       	0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+};
+
+#else
+#error SDRAM not correctly configured
+#endif
+
+int _initsdram (uint base, uint noMbytes)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	if (noMbytes != 8) {
+		return -1;
+	}
+
+	upmconfig (UPMA, (uint *) sdram_table,
+		   sizeof (sdram_table) / sizeof (uint));
+
+	memctl->memc_mptpr = SDRAM_MPTPRVALUE;
+
+	/* Configure the refresh (mostly).  This needs to be
+	 * based upon processor clock speed and optimized to provide
+	 * the highest level of performance.  For multiple banks,
+	 * this time has to be divided by the number of banks.
+	 * Although it is not clear anywhere, it appears the
+	 * refresh steps through the chip selects for this UPM
+	 * on each refresh cycle.
+	 * We have to be careful changing
+	 * UPM registers after we ask it to run these commands.
+	 */
+
+	memctl->memc_mamr = (SDRAM_MAMRVALUE0 | (SDRAM_MARVALUE << 24));
+	memctl->memc_mar = 0x0;
+	udelay (200);
+
+	/* Now run the precharge/nop/mrs commands.
+	 */
+	memctl->memc_mcr = 0x80002115;
+	udelay (200);
+
+	/* Run 8 refresh cycles */
+	memctl->memc_mcr = 0x80002380;
+	udelay (200);
+
+	memctl->memc_mar = 0x88;
+	udelay (200);
+
+	memctl->memc_mcr = 0x80002116;
+	udelay (200);
+
+	memctl->memc_or1 = SDRAM_OR1VALUE;
+	memctl->memc_br1 = SDRAM_BR1VALUE | base;
+
+	return 0;
+}
+
+void _sdramdisable( void )
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_br1 = 0x00000000;
+
+	/* maybe we should turn off upma here or something */
+}
+
+int initsdram (uint base, uint * noMbytes)
+{
+	uint m = 8;
+
+	*noMbytes = m;
+
+	if (!_initsdram (base, m)) {
+		return 0;
+	} else {
+		_sdramdisable ();
+		return -1;
+	}
+}
+
+long int initdram (int board_type)
+{
+	/* AdderII: has 8MB SDRAM */
+	uint sdramsz;
+	uint m = 0;
+
+	if (!initsdram (0x00000000, &sdramsz)) {
+		m += sdramsz;
+	} else {
+		return -1;
+	}
+	return (m << 20);
+}
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX not an actual SDRAM test */
+	printf ("Test: 8MB SDRAM\n");
+
+	return (0);
+}
--- a/board/adderII/adderII.h
+++ b/board/adderII/adderII.h
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************
+ * FLASH Memory Map as used by FADS Monitor:
+ *
+ *                          Start Address    Length
+ * +-----------------------+ 0xFE00_0000     Start of Flash -----------------
+ * | MON8xx code           | 0xFE00_0100     Reset Vector
+ * +-----------------------+ 0xFE0?_????
+ * | (unused)              |
+ * +-----------------------+
+ * | 			   |
+ * +-----------------------+
+ * | 			   |
+ * +-----------------------+
+ * | 			   |
+ * +-----------------------+
+ * | 			   |
+ * +=======================+
+ * | 			   |
+ * | ...                   |
+ *****************************************************************************/
+
+
--- a/board/adderII/config.mk
+++ b/board/adderII/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AdderII board ( Analogue-Micro )
+#
+
+TEXT_BASE = 0xFE000000
+
--- a/board/adderII/flash.c
+++ b/board/adderII/flash.c
@@ -0,0 +1,501 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/******************************************************************************
+** Notes: AM29LV320DB - 90EI ( 32 Mbit device )
+** Sectors - Eight 8 Kb sector
+** 	   - Sixty three 64 Kb sector
+** Bottom boot sector
+******************************************************************************/
+#include <common.h>
+#include <mpc8xx.h>
+
+
+/******************************************************************************
+**	Defines
+******************************************************************************/
+#ifdef CONFIG_ADDERII
+
+#define ADDR0	0x0555
+#define ADDR1	0x02AA
+#define FLASH_WORD_SIZE unsigned short
+
+#endif
+
+#if defined( CFG_ENV_IS_IN_FLASH )
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR  ( CFG_FLASH_BASE + CFG_ENV_OFFSET )
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+/******************************************************************************
+**	Global Parameters
+******************************************************************************/
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/******************************************************************************
+**	Function Prototypes
+******************************************************************************/
+static ulong flash_get_size( vu_long *addr, flash_info_t *info );
+
+static int write_word( flash_info_t *info, ulong dest, ulong data );
+
+static void flash_get_offsets( ulong base, flash_info_t *info );
+
+int wait_for_DQ7( flash_info_t *info, int sect );
+
+/******************************************************************************
+** Function :	flash_init
+** Param    :   void
+** Notes    :   Initializes the Flash Chip
+******************************************************************************/
+ulong flash_init (void)
+{
+	ulong size_b0 = -1;
+	int i;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	/* Set Flash to unknown */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Get the Flash Bank Size */
+
+	size_b0 = flash_get_size ((vu_long *) (CFG_FLASH_BASE),
+				  &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## UNKNOWN Flash on Bank 0 - Size = 0x%08lx = %ldMB\n",
+			size_b0, size_b0 >> 20);
+	}
+
+	/* Remap Flash according to size detected  */
+	memctl->memc_or0 = 0xFF800774;
+	memctl->memc_br0 = CFG_BR0_PRELIM;
+
+	/* Setup Flash Sector Offsets */
+
+	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+	/* Monitor Protection ON - default */
+
+#if ( CFG_MONITOR_BASE >= CFG_FLASH_BASE  )
+	flash_protect (FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+		       (CFG_MONITOR_BASE + monitor_flash_len - 1),
+		       &flash_info[0]);
+#endif
+
+	/* Protect Environment Variables */
+#ifdef CFG_ENV_IS_IN_FLASH
+	flash_protect (FLAG_PROTECT_SET, CFG_ENV_ADDR,
+		       (CFG_ENV_ADDR + CFG_ENV_SIZE - 1), &flash_info[0]);
+#endif
+
+	return size_b0;
+}
+
+/******************************************************************************
+** Function : flash_get_offsets
+** Param    : ulong base, flash_into_t *info
+** Notes    :
+******************************************************************************/
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	return;
+}
+
+
+/******************************************************************************
+** Function : flash_print_info
+** Param    : flash_info_t
+** Notes    :
+******************************************************************************/
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Missing or unknown flash type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("FUJITSU ");
+		break;
+	case FLASH_MAN_BM:
+		printf ("BRIGHT MICRO ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM320B:
+		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+		break;
+	case FLASH_AM320T:
+		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n", info->size >> 20,
+		info->sector_count);
+	printf ("  Sector Start Addresses:");
+
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/******************************************************************************
+** Function : flash_get_size
+** Param    : vu_long *addr, flash_info_t *info
+** Notes    :
+******************************************************************************/
+static ulong flash_get_size (vu_long * addr, flash_info_t * info)
+{
+	short i;
+	FLASH_WORD_SIZE manu_id, dev_id;
+	ulong base = (ulong) addr;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
+
+	/* Write Auto Select Command and read Manufacturer's ID and Dev ID */
+
+	addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
+	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
+	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
+
+	manu_id = addr2[0];
+
+	switch (manu_id) {
+	case (FLASH_WORD_SIZE) AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		break;
+	}
+
+	/* Read Device Id */
+	dev_id = addr2[1];
+
+	switch (dev_id) {
+	case (FLASH_WORD_SIZE) AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 71;	/* 8 - boot sec + 63 normal */
+		info->size = 0x400000;	/* 4MByte */
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	/* Set up sector start Addresses */
+
+	if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block
+		 ** Eight 8 Kb Boot sectors
+		 ** Sixty Three 64Kb sectors
+		 */
+		for (i = 0; i < 8; i++) {
+			info->start[i] = base + (i * 0x00002000);
+		}
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00070000;
+		}
+	}
+
+	/* Reset To read mode */
+
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (ulong *) info->start[0];
+		*addr = 0xF0F0F0F0;
+	}
+	return (info->size);
+}
+
+/*******************************************************************************
+** Function : flash_erase
+** Param    : flash_info_t *info, int s_first, int s_last
+** Notes    :
+******************************************************************************/
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) ==
+			    FLASH_MAN_SST) {
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay (1000);	/* wait 1 ms */
+			} else {
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
+				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7 (info, sect);
+		}
+	}
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/* reset to read mode */
+	addr = (FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+int wait_for_DQ7 (flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile FLASH_WORD_SIZE *addr =
+		(FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer (0);
+	last = start;
+	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
+	       (FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {
+			putc ('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+
+/******************************************************************************
+** Function : write_buff
+** Param    : flash_info_t *info, uchar *src, ulong addr, ulong cnt
+** Notes    :
+******************************************************************************/
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	/* get lower word aligned address */
+	wp = (addr & ~3);
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_word (info, wp, data));
+}
+
+
+/******************************************************************************
+** Function : write_word
+** Param    : flash_info_t *info, ulong dest, ulong data
+** Notes    :
+******************************************************************************/
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+	volatile FLASH_WORD_SIZE *addr2 =
+		(FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile FLASH_WORD_SIZE *) dest) &
+	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+		return (2);
+	}
+
+	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts ();
+
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts ();
+
+		/* data polling for D7 */
+		start = get_timer (0);
+		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return (1);
+			}
+		}
+	}
+
+	return (0);
+}
--- a/board/adderII/u-boot.lds
+++ b/board/adderII/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+/*
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  . = ALIGN(256 * 1024);
+  .ppcenv	:
+  {
+    common/environment.o (.ppcenv)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+
--- a/board/at91rm9200dk/at91rm9200dk.c
+++ b/board/at91rm9200dk/at91rm9200dk.c
@@ -66,7 +66,7 @@ int dram_init (void)
 * The NAND lives in the CS2* space
 */
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
-extern void nand_probe (ulong physadr);
+extern ulong nand_probe (ulong physadr);

 #define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
 void nand_init (void)
@@ -103,10 +103,12 @@ void nand_init (void)
 	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */

 	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-		printf ("No ");
-	printf ("SmartMedia card inserted\n");
+		printf ("  No SmartMedia card inserted\n");
+#ifdef DEBUG
+	printf ("  SmartMedia card inserted\n");

 	printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
-	nand_probe (AT91_SMARTMEDIA_BASE);
+#endif
+	printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
 }
 #endif
--- a/board/bmw/bmw.c
+++ b/board/bmw/bmw.c
@@ -27,7 +27,6 @@
 #include <command.h>
 #include <malloc.h>
 #include <devices.h>
-#include <syscall.h>
 #include <net.h>
 #include <version.h>
 #include <dtt.h>
--- a/board/dave/PPChameleonEVB/Makefile
+++ b/board/dave/PPChameleonEVB/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -0,0 +1,274 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
+        out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
+
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+#if 1 /* test-only */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+#else
+	mtebc (epcr, 0x28400000); /* ebc in high-z */
+#endif
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+#if 0 /* test-only */
+	DECLARE_GLOBAL_DATA_PTR;
+#if 0
+	volatile unsigned short *fpga_mode =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+	volatile unsigned char *duart0_mcr =
+		(unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr =
+		(unsigned char *)((ulong)DUART1_BA + 4);
+
+	bd_t *bd = gd->bd;
+	char *	tmp;                    /* Temporary char pointer      */
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+	unsigned long cntrl0Reg;
+
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+#endif
+
+#if 0
+	/*
+	 * Enable power on PS/2 interface
+	 */
+	*fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+#endif
+#endif
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming PPChameleonEVB");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0 /* test-only */
+	for (;;) {
+		NAND_DISABLE_CE(1);
+		udelay(100);
+		NAND_ENABLE_CE(1);
+		udelay(100);
+	}
+#endif
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+extern ulong
+nand_probe(ulong physadr);
+
+void
+nand_init(void)
+{
+	ulong totlen;
+
+	debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
+	totlen = nand_probe (CFG_NAND0_BASE);
+
+	debug ("Probing at 0x%.8x\n", CFG_NAND1_BASE);
+	totlen += nand_probe (CFG_NAND1_BASE);
+
+	printf ("%4lu MB\n", totlen >>20);
+}
+#endif
--- a/board/dave/PPChameleonEVB/config.mk
+++ b/board/dave/PPChameleonEVB/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+#ifdef __DEBUG_START_FROM_SRAM__
+	return CFG_DUMMY_FLASH_SIZE;
+#else
+	unsigned long size_b0;
+	int i;
+        uint pbcr;
+        unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+        /* Setup offsets */
+        flash_get_offsets (-size_b0, &flash_info[0]);
+
+        /* Re-do sizing to get full correct info */
+        mtdcr(ebccfga, pb0cr);
+        pbcr = mfdcr(ebccfgd);
+        mtdcr(ebccfga, pb0cr);
+        base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+        mtdcr(ebccfgd, pbcr);
+
+        /* Monitor protection ON by default */
+        (void)flash_protect(FLAG_PROTECT_SET,
+                            -CFG_MONITOR_LEN,
+                            0xffffffff,
+                            &flash_info[0]);
+
+        flash_info[0].size = size_b0;
+
+	return (size_b0);
+#endif
+}
--- a/board/dave/PPChameleonEVB/fpgadata.c
+++ b/board/dave/PPChameleonEVB/fpgadata.c
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/dave/common/flash.c
+++ b/board/dave/common/flash.c
@@ -0,0 +1,681 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+	short n;
+
+	/* set up sector start address table */
+        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
+	    for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
+		/* set sector offsets for bottom boot block type	*/
+		for (i=0; i<8; ++i) {		/*  8 x 8k boot sectors	*/
+			info->start[i] = base;
+			base += 8 << 10;
+		}
+		while (i < info->sector_count) {	/* 64k regular sectors	*/
+			info->start[i] = base;
+			base += 64 << 10;
+			++i;
+		}
+        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
+		/* set sector offsets for top boot block type		*/
+		base += info->size;
+		i = info->sector_count;
+		for (n=0; n<8; ++n) {		/*  8 x 8k boot sectors	*/
+			base -= 8 << 10;
+			--i;
+			info->start[i] = base;
+		}
+		while (i > 0) {			/* 64k regular sectors	*/
+			base -= 64 << 10;
+			--i;
+			info->start[i] = base;
+		}
+        } else {
+	    if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	    } else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	    }
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+        int k;
+        int size;
+        int erased;
+        volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("ST  ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 M, top sector)\n");
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 M, bottom sector)\n");
+				break;
+	case FLASH_AMDL322T:	printf ("AM29DL322T (32 M, top sector)\n");
+				break;
+	case FLASH_AMDL322B:	printf ("AM29DL322B (32 M, bottom sector)\n");
+				break;
+	case FLASH_AMDL323T:	printf ("AM29DL323T (32 M, top sector)\n");
+				break;
+	case FLASH_AMDL323B:	printf ("AM29DL323B (32 M, bottom sector)\n");
+				break;
+	case FLASH_AM640U:	printf ("AM29LV640D (64 M, uniform sector)\n");
+				break;
+	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+				break;
+	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+				break;
+	case FLASH_STMW320DT:	printf ("M29W320DT (32 M, top sector)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+#ifdef CFG_FLASH_EMPTY_INFO
+                /*
+                 * Check if whole sector is erased
+                 */
+                if (i != (info->sector_count-1))
+                  size = info->start[i+1] - info->start[i];
+                else
+                  size = info->start[0] + info->size - info->start[i];
+                erased = 1;
+                flash = (volatile unsigned long *)info->start[i];
+                size = size >> 2;        /* divide by 4 for longword access */
+                for (k=0; k<size; k++)
+                  {
+                    if (*flash++ != 0xffffffff)
+                      {
+                        erased = 0;
+                        break;
+                      }
+                  }
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+                /* print empty and read-only info */
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   ");
+#else
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+#endif
+
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	short n;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong)addr;
+        volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00900090;
+
+	value = addr2[CFG_FLASH_READ0];
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case (CFG_FLASH_WORD_SIZE)FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
+		info->flash_id = FLASH_MAN_SST;
+		break;
+	case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+		info->flash_id = FLASH_MAN_STM;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr2[CFG_FLASH_READ1];		/* device ID		*/
+
+	switch (value) {
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;				/* => 0.5 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;				/* => 0.5 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+	        info->flash_id += FLASH_STMW320DT;
+	        info->sector_count = 67;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+	        info->flash_id += FLASH_AM320T;
+	        info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+	        info->flash_id += FLASH_AM320B;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
+	        info->flash_id += FLASH_AMDL322T;
+	        info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
+	        info->flash_id += FLASH_AMDL322B;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
+	        info->flash_id += FLASH_AMDL323T;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
+	        info->flash_id += FLASH_AMDL323B;
+		info->sector_count = 71;
+		info->size = 0x00400000;  break;	/* => 4 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
+	        info->flash_id += FLASH_AM640U;
+		info->sector_count = 128;
+		info->size = 0x00800000;  break;	/* => 8 MB	*/
+
+	case (CFG_FLASH_WORD_SIZE)SST_ID_xF800A:
+		info->flash_id += FLASH_SST800A;
+		info->sector_count = 16;
+		info->size = 0x00100000;
+		break;				/* => 1 MB		*/
+
+	case (CFG_FLASH_WORD_SIZE)SST_ID_xF160A:
+		info->flash_id += FLASH_SST160A;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
+	    for (i = 0; i < info->sector_count; i++)
+		info->start[i] = base + (i * 0x00010000);
+        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
+		/* set sector offsets for bottom boot block type	*/
+		for (i=0; i<8; ++i) {		/*  8 x 8k boot sectors	*/
+			info->start[i] = base;
+			base += 8 << 10;
+		}
+		while (i < info->sector_count) {	/* 64k regular sectors	*/
+			info->start[i] = base;
+			base += 64 << 10;
+			++i;
+		}
+        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
+		/* set sector offsets for top boot block type		*/
+		base += info->size;
+		i = info->sector_count;
+		for (n=0; n<8; ++n) {		/*  8 x 8k boot sectors	*/
+			base -= 8 << 10;
+			--i;
+			info->start[i] = base;
+		}
+		while (i > 0) {			/* 64k regular sectors	*/
+			base -= 64 << 10;
+			--i;
+			info->start[i] = base;
+		}
+        } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+		/* set sector offsets for top boot block type		*/
+		base += info->size;
+		i = info->sector_count;
+                /*  1 x 16k boot sector */
+		base -= 16 << 10;
+                --i;
+		info->start[i] = base;
+		/*  2 x 8k  boot sectors */
+		for (n=0; n<2; ++n) {
+			base -= 8 << 10;
+			--i;
+			info->start[i] = base;
+		}
+                /*  1 x 32k boot sector */
+		base -= 32 << 10;
+                --i;
+		info->start[i] = base;
+
+		while (i > 0) {			/* 64k regular sectors	*/
+			base -= 64 << 10;
+			--i;
+			info->start[i] = base;
+		}
+        } else {
+	    if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00004000;
+		info->start[2] = base + 0x00006000;
+		info->start[3] = base + 0x00008000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		}
+	    } else {
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00010000;
+		}
+	    }
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+                  info->protect[i] = 0;
+                else
+                  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr2 = (CFG_FLASH_WORD_SIZE *)info->start[0];
+		*addr2 = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+        int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+		    addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
+                    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+                        addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+                        addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+                        addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
+                        for (i=0; i<50; i++)
+                          udelay(1000);  /* wait 1 ms */
+                    } else {
+                        if (sect == s_first) {
+                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+                            addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+                            addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+                        }
+                        addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+                    }
+		    l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (CFG_FLASH_WORD_SIZE *)(info->start[l_sect]);
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE)0x00800080) != (CFG_FLASH_WORD_SIZE)0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *)info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+        volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
+        volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
+        volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	ulong start;
+	int flag;
+        int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
+             (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+        for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+          {
+            addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+            addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+            addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+
+            dest2[i] = data2[i];
+
+            /* re-enable interrupts if necessary */
+            if (flag)
+              enable_interrupts();
+
+            /* data polling for D7 */
+            start = get_timer (0);
+            while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
+                   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
+              if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+                return (1);
+              }
+            }
+          }
+
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
--- a/board/dave/common/fpga.c
+++ b/board/dave/common/fpga.c
@@ -0,0 +1,256 @@
+/*
+ * (C) Copyright 2001-2003
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef FPGA_DEBUG
+#define DBG(x...) printf(x)
+#else
+#define DBG(x...)
+#endif /* DEBUG */
+
+#define MAX_ONES               226
+
+#ifdef CFG_FPGA_PRG
+# define FPGA_PRG              CFG_FPGA_PRG /* FPGA program pin (ppc output)*/
+# define FPGA_CLK              CFG_FPGA_CLK /* FPGA clk pin (ppc output)    */
+# define FPGA_DATA             CFG_FPGA_DATA /* FPGA data pin (ppc output)  */
+# define FPGA_DONE             CFG_FPGA_DONE /* FPGA done pin (ppc input)   */
+# define FPGA_INIT             CFG_FPGA_INIT /* FPGA init pin (ppc input)   */
+#else
+# define FPGA_PRG              0x04000000  /* FPGA program pin (ppc output) */
+# define FPGA_CLK              0x02000000  /* FPGA clk pin (ppc output)     */
+# define FPGA_DATA             0x01000000  /* FPGA data pin (ppc output)    */
+# define FPGA_DONE             0x00800000  /* FPGA done pin (ppc input)     */
+# define FPGA_INIT             0x00400000  /* FPGA init pin (ppc input)     */
+#endif
+
+#define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
+#define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
+#define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
+
+#define SET_FPGA(data)         out32(GPIO0_OR, data)
+
+#define FPGA_WRITE_1 {                                                    \
+        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+
+#define FPGA_WRITE_0 {                                                    \
+        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+        SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
+        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+
+#if 0
+static int fpga_boot (unsigned char *fpgadata, int size)
+{
+	int i, index, len;
+	int count;
+
+#ifdef CFG_FPGA_SPARTAN2
+	int j;
+#else
+	unsigned char b;
+	int bit;
+#endif
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i = 0; i < 4; i++) {
+		len = fpgadata[index];
+		DBG ("FPGA: %s\n", &(fpgadata[index + 1]));
+		index += len + 3;
+	}
+
+#ifdef CFG_FPGA_SPARTAN2
+	/* search for preamble 0xFFFFFFFF */
+	while (1) {
+		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
+		    && (fpgadata[index + 2] == 0xff)
+		    && (fpgadata[index + 3] == 0xff))
+			break;	/* preamble found */
+		else
+			index++;
+	}
+#else
+	/* search for preamble 0xFF2X */
+	for (index = 0; index < size - 1; index++) {
+		if ((fpgadata[index] == 0xff)
+		    && ((fpgadata[index + 1] & 0xf0) == 0x30))
+			break;
+	}
+	index += 2;
+#endif
+
+	DBG ("FPGA: configdata starts at position 0x%x\n", index);
+	DBG ("FPGA: length of fpga-data %d\n", size - index);
+
+	/*
+	 * Setup port pins for fpga programming
+	 */
+	out32 (GPIO0_ODR, 0x00000000);	/* no open drain pins */
+	out32 (GPIO0_TCR, in32 (GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA);	/* setup for output */
+	out32 (GPIO0_OR, in32 (GPIO0_OR) | FPGA_PRG | FPGA_CLK | FPGA_DATA);	/* set pins to high */
+
+	DBG ("%s, ",
+	     ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+	DBG ("%s\n",
+	     ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+	/*
+	 * Init fpga by asserting and deasserting PROGRAM*
+	 */
+	SET_FPGA (FPGA_CLK | FPGA_DATA);
+
+	/* Wait for FPGA init line low */
+	count = 0;
+	while (in32 (GPIO0_IR) & FPGA_INIT) {
+		udelay (1000);	/* wait 1ms */
+		/* Check for timeout - 100us max, so use 3ms */
+		if (count++ > 3) {
+			DBG ("FPGA: Booting failed!\n");
+			return ERROR_FPGA_PRG_INIT_LOW;
+		}
+	}
+
+	DBG ("%s, ",
+	     ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+	DBG ("%s\n",
+	     ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+	/* deassert PROGRAM* */
+	SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
+
+	/* Wait for FPGA end of init period .  */
+	count = 0;
+	while (!(in32 (GPIO0_IR) & FPGA_INIT)) {
+		udelay (1000);	/* wait 1ms */
+		/* Check for timeout */
+		if (count++ > 3) {
+			DBG ("FPGA: Booting failed!\n");
+			return ERROR_FPGA_PRG_INIT_HIGH;
+		}
+	}
+
+	DBG ("%s, ",
+	     ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+	DBG ("%s\n",
+	     ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+	DBG ("write configuration data into fpga\n");
+	/* write configuration-data into fpga... */
+
+#ifdef CFG_FPGA_SPARTAN2
+	/*
+	 * Load uncompressed image into fpga
+	 */
+	for (i = index; i < size; i++) {
+		for (j = 0; j < 8; j++) {
+			if ((fpgadata[i] & 0x80) == 0x80) {
+				FPGA_WRITE_1;
+			} else {
+				FPGA_WRITE_0;
+			}
+			fpgadata[i] <<= 1;
+		}
+	}
+#else	/* ! CFG_FPGA_SPARTAN2 */
+	/* send 0xff 0x20 */
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_1;
+	FPGA_WRITE_0;
+	FPGA_WRITE_0;
+	FPGA_WRITE_1;
+	FPGA_WRITE_0;
+	FPGA_WRITE_0;
+	FPGA_WRITE_0;
+	FPGA_WRITE_0;
+	FPGA_WRITE_0;
+
+	/*
+	 ** Bit_DeCompression
+	 **   Code 1           .. maxOnes     : n                 '1's followed by '0'
+	 **        maxOnes + 1 .. maxOnes + 1 : n - 1             '1's no '0'
+	 **        maxOnes + 2 .. 254         : n - (maxOnes + 2) '0's followed by '1'
+	 **        255                        :                   '1'
+	 */
+
+	for (i = index; i < size; i++) {
+		b = fpgadata[i];
+		if ((b >= 1) && (b <= MAX_ONES)) {
+			for (bit = 0; bit < b; bit++) {
+				FPGA_WRITE_1;
+			}
+			FPGA_WRITE_0;
+		} else if (b == (MAX_ONES + 1)) {
+			for (bit = 1; bit < b; bit++) {
+				FPGA_WRITE_1;
+			}
+		} else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
+			for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
+				FPGA_WRITE_0;
+			}
+			FPGA_WRITE_1;
+		} else if (b == 255) {
+			FPGA_WRITE_1;
+		}
+	}
+#endif	/* CFG_FPGA_SPARTAN2 */
+
+	DBG ("%s, ",
+	     ((in32 (GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+	DBG ("%s\n",
+	     ((in32 (GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+	/*
+	 * Check if fpga's DONE signal - correctly booted ?
+	 */
+
+	/* Wait for FPGA end of programming period .  */
+	count = 0;
+	while (!(in32 (GPIO0_IR) & FPGA_DONE)) {
+		udelay (1000);	/* wait 1ms */
+		/* Check for timeout */
+		if (count++ > 3) {
+			DBG ("FPGA: Booting failed!\n");
+			return ERROR_FPGA_PRG_DONE;
+		}
+	}
+
+	DBG ("FPGA: Booting successful!\n");
+	return 0;
+}
+#endif	/* 0 */
--- a/board/dave/common/pci.c
+++ b/board/dave/common/pci.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <pci.h>
+
+
+u_long pci9054_iobase;
+
+
+#define PCI_PRIMARY_CAR	(0x500000dc) /* PCI config address reg */
+#define PCI_PRIMARY_CDR	(0x80000000) /* PCI config data    reg */
+
+
+/*-----------------------------------------------------------------------------+
+|  Subroutine:  pci9054_read_config_dword
+|  Description: Read a PCI configuration register
+|  Inputs:
+|               hose            PCI Controller
+|               dev             PCI Bus+Device+Function number
+|               offset          Configuration register number
+|               value           Address of the configuration register value
+|  Return value:
+|               0               Successful
+-----------------------------------------------------------------------------*/
+int pci9054_read_config_dword(struct pci_controller *hose,
+			      pci_dev_t dev, int offset, u32* value)
+{
+  unsigned long      conAdrVal;
+  unsigned long      val;
+
+  /* generate coded value for CON_ADR register */
+  conAdrVal = dev | (offset & 0xfc) | 0x80000000;
+
+  /* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */
+  *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
+
+  /* Note: *pResult comes back as -1 if machine check happened */
+  val = in32r(PCI_PRIMARY_CDR);
+
+  *value = (unsigned long) val;
+
+  out32r(PCI_PRIMARY_CAR, 0);
+
+  if ((*(unsigned long *)0x50000304) & 0x60000000)
+    {
+      /* clear pci master/target abort bits */
+      *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
+    }
+
+  return 0;
+}
+
+/*-----------------------------------------------------------------------------+
+|  Subroutine:  pci9054_write_config_dword
+|  Description: Write a PCI configuration register.
+|  Inputs:
+|               hose            PCI Controller
+|               dev             PCI Bus+Device+Function number
+|               offset          Configuration register number
+|               Value           Configuration register value
+|  Return value:
+|               0               Successful
+| Updated for pass2 errata #6. Need to disable interrupts and clear the
+| PCICFGADR reg after writing the PCICFGDATA reg.
+-----------------------------------------------------------------------------*/
+int pci9054_write_config_dword(struct pci_controller *hose,
+			       pci_dev_t dev, int offset, u32 value)
+{
+  unsigned long      conAdrVal;
+
+  conAdrVal = dev | (offset & 0xfc) | 0x80000000;
+
+  *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal;
+
+  out32r(PCI_PRIMARY_CDR, value);
+
+  out32r(PCI_PRIMARY_CAR, 0);
+
+  /* clear pci master/target abort bits */
+  *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304;
+
+  return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_DASA_SIM
+static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t dev,
+					struct pci_config_table *_)
+{
+  unsigned int iobase;
+  unsigned short status = 0;
+  unsigned char timer;
+
+  /*
+   * Configure PLX PCI9054
+   */
+  pci_read_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, &status);
+  status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+  pci_write_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, status);
+
+  /* Check the latency timer for values >= 0x60.
+   */
+  pci_read_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer);
+  if (timer < 0x60)
+    {
+      pci_write_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60);
+    }
+
+  /* Set I/O base register.
+   */
+  pci_write_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CFG_PCI9054_IOBASE);
+  pci_read_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase);
+
+  pci9054_iobase = pci_mem_to_phys(CFG_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK);
+
+  if (pci9054_iobase == 0xffffffff)
+    {
+      printf("Error: Can not set I/O base register.\n");
+      return;
+    }
+}
+#endif
+
+static struct pci_config_table pci9054_config_table[] = {
+#ifndef CONFIG_PCI_PNP
+  { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+    PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
+    pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
+				 CFG_ETH_IOBASE,
+				 PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
+#ifdef CONFIG_DASA_SIM
+  { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+    PCI_BUS(CFG_PCI9054_DEV_FN), PCI_DEV(CFG_PCI9054_DEV_FN), PCI_FUNC(CFG_PCI9054_DEV_FN),
+    pci_dasa_sim_config_pci9054 },
+#endif
+#endif
+  { }
+};
+
+static struct pci_controller pci9054_hose = {
+  config_table: pci9054_config_table,
+};
+
+void pci_init(void)
+{
+  struct pci_controller *hose = &pci9054_hose;
+
+  /*
+   * Register the hose
+   */
+  hose->first_busno = 0;
+  hose->last_busno = 0xff;
+
+  /* System memory space */
+  pci_set_region(hose->regions + 0,
+		 0x00000000, 0x00000000, 0x01000000,
+		 PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+  /* PCI Memory space */
+  pci_set_region(hose->regions + 1,
+		 0x00000000, 0xc0000000, 0x10000000,
+		 PCI_REGION_MEM);
+
+  pci_set_ops(hose,
+	      pci_hose_read_config_byte_via_dword,
+	      pci_hose_read_config_word_via_dword,
+	      pci9054_read_config_dword,
+	      pci_hose_write_config_byte_via_dword,
+	      pci_hose_write_config_word_via_dword,
+	      pci9054_write_config_dword);
+
+  hose->region_count = 2;
+
+  pci_register_hose(hose);
+
+  hose->last_busno = pci_hose_scan(hose);
+}
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -173,7 +173,7 @@ void after_reloc (ulong dest_addr)
    /*
     * Jump to the main U-Boot board init code
     */
-    board_init_r(gd, dest_addr);
+    board_init_r((gd_t *)gd, dest_addr);
 }

 /* ------------------------------------------------------------------------- */
--- a/board/eltec/elppc/elppc.c
+++ b/board/eltec/elppc/elppc.c
@@ -142,7 +142,7 @@ void after_reloc (ulong dest_addr)
 	/*
 	 * Jump to the main U-Boot board init code
 	 */
-	board_init_r (gd, dest_addr);
+	board_init_r ((gd_t *)gd, dest_addr);
 }

 /* ------------------------------------------------------------------------- */
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -254,7 +254,7 @@ long int initdram (int board_type)
    upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));

    memctl->memc_mamr  = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
-    memctl->memc_mbmr  = MAMR_GPL_B4DIS;
+    memctl->memc_mbmr  = MBMR_GPL_B4DIS;	/* should this be mamr? - NTL */
    memctl->memc_mptpr = MPTPR_PTP_DIV64;
    memctl->memc_mar   = 0x00008800;

--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -246,7 +246,6 @@ void nand_init(void)
 {
 	nand_probe(CFG_NAND_BASE);
 	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
-		puts("NAND:  ");
 		print_size(nand_dev_desc[0].totlen, "\n");
 	}
 }
--- a/board/esd/ash405/fpgadata.c
+++ b/board/esd/ash405/fpgadata.c
--- a/board/esd/common/xilinx_jtag/lenval.c
+++ b/board/esd/common/xilinx_jtag/lenval.c
@@ -0,0 +1,217 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: lenval.c                                      */
+/* abstract:  This file contains routines for using    */
+/*            the lenVal data structure.               */
+/*******************************************************/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include "lenval.h"
+#include "ports.h"
+
+
+/*****************************************************************************
+ * Function:     value
+ * Description:  Extract the long value from the lenval array.
+ * Parameters:   plvValue    - ptr to lenval.
+ * Returns:      long        - the extracted value.
+ *****************************************************************************/
+long value( lenVal*     plvValue )
+{
+	long    lValue;         /* result to hold the accumulated result */
+	short   sIndex;
+
+	lValue  = 0;
+	for ( sIndex = 0; sIndex < plvValue->len ; ++sIndex )
+	{
+		lValue <<= 8;                       /* shift the accumulated result */
+		lValue |= plvValue->val[ sIndex];   /* get the last byte first */
+	}
+
+	return( lValue );
+}
+
+/*****************************************************************************
+ * Function:     initLenVal
+ * Description:  Initialize the lenval array with the given value.
+ *               Assumes lValue is less than 256.
+ * Parameters:   plv         - ptr to lenval.
+ *               lValue      - the value to set.
+ * Returns:      void.
+ *****************************************************************************/
+void initLenVal( lenVal*    plv,
+                 long       lValue )
+{
+	plv->len    = 1;
+	plv->val[0] = (unsigned char)lValue;
+}
+
+/*****************************************************************************
+ * Function:     EqualLenVal
+ * Description:  Compare two lenval arrays with an optional mask.
+ * Parameters:   plvTdoExpected  - ptr to lenval #1.
+ *               plvTdoCaptured  - ptr to lenval #2.
+ *               plvTdoMask      - optional ptr to mask (=0 if no mask).
+ * Returns:      short   - 0 = mismatch; 1 = equal.
+ *****************************************************************************/
+short EqualLenVal( lenVal*  plvTdoExpected,
+                   lenVal*  plvTdoCaptured,
+                   lenVal*  plvTdoMask )
+{
+	short           sEqual;
+	short           sIndex;
+	unsigned char   ucByteVal1;
+	unsigned char   ucByteVal2;
+	unsigned char   ucByteMask;
+
+	sEqual  = 1;
+	sIndex  = plvTdoExpected->len;
+
+	while ( sEqual && sIndex-- )
+	{
+		ucByteVal1  = plvTdoExpected->val[ sIndex ];
+		ucByteVal2  = plvTdoCaptured->val[ sIndex ];
+		if ( plvTdoMask )
+		{
+			ucByteMask  = plvTdoMask->val[ sIndex ];
+			ucByteVal1  &= ucByteMask;
+			ucByteVal2  &= ucByteMask;
+		}
+		if ( ucByteVal1 != ucByteVal2 )
+		{
+			sEqual  = 0;
+		}
+	}
+
+	return( sEqual );
+}
+
+
+/*****************************************************************************
+ * Function:     RetBit
+ * Description:  return the (byte, bit) of lv (reading from left to right).
+ * Parameters:   plv     - ptr to lenval.
+ *               iByte   - the byte to get the bit from.
+ *               iBit    - the bit number (0=msb)
+ * Returns:      short   - the bit value.
+ *****************************************************************************/
+short RetBit( lenVal*   plv,
+              int       iByte,
+              int       iBit )
+{
+	/* assert( ( iByte >= 0 ) && ( iByte < plv->len ) ); */
+	/* assert( ( iBit >= 0 ) && ( iBit < 8 ) ); */
+	return( (short)( ( plv->val[ iByte ] >> ( 7 - iBit ) ) & 0x1 ) );
+}
+
+/*****************************************************************************
+ * Function:     SetBit
+ * Description:  set the (byte, bit) of lv equal to val
+ * Example:      SetBit("00000000",byte, 1) equals "01000000".
+ * Parameters:   plv     - ptr to lenval.
+ *               iByte   - the byte to get the bit from.
+ *               iBit    - the bit number (0=msb).
+ *               sVal    - the bit value to set.
+ * Returns:      void.
+ *****************************************************************************/
+void SetBit( lenVal*    plv,
+             int        iByte,
+             int        iBit,
+             short      sVal )
+{
+	unsigned char   ucByteVal;
+	unsigned char   ucBitMask;
+
+	ucBitMask   = (unsigned char)(1 << ( 7 - iBit ));
+	ucByteVal   = (unsigned char)(plv->val[ iByte ] & (~ucBitMask));
+
+	if ( sVal )
+	{
+		ucByteVal   |= ucBitMask;
+	}
+	plv->val[ iByte ]   = ucByteVal;
+}
+
+/*****************************************************************************
+ * Function:     AddVal
+ * Description:  add val1 to val2 and store in resVal;
+ *               assumes val1 and val2  are of equal length.
+ * Parameters:   plvResVal   - ptr to result.
+ *               plvVal1     - ptr of addendum.
+ *               plvVal2     - ptr of addendum.
+ * Returns:      void.
+ *****************************************************************************/
+void addVal( lenVal*    plvResVal,
+             lenVal*    plvVal1,
+             lenVal*    plvVal2 )
+{
+	unsigned char   ucCarry;
+	unsigned short  usSum;
+	unsigned short  usVal1;
+	unsigned short  usVal2;
+	short           sIndex;
+
+	plvResVal->len  = plvVal1->len;         /* set up length of result */
+
+	/* start at least significant bit and add bytes    */
+	ucCarry = 0;
+	sIndex  = plvVal1->len;
+	while ( sIndex-- )
+	{
+		usVal1  = plvVal1->val[ sIndex ];   /* i'th byte of val1 */
+		usVal2  = plvVal2->val[ sIndex ];   /* i'th byte of val2 */
+
+		/* add the two bytes plus carry from previous addition */
+		usSum   = (unsigned short)( usVal1 + usVal2 + ucCarry );
+
+		/* set up carry for next byte */
+		ucCarry = (unsigned char)( ( usSum > 255 ) ? 1 : 0 );
+
+		/* set the i'th byte of the result */
+		plvResVal->val[ sIndex ]    = (unsigned char)usSum;
+	}
+}
+
+/*****************************************************************************
+ * Function:     readVal
+ * Description:  read from XSVF numBytes bytes of data into x.
+ * Parameters:   plv         - ptr to lenval in which to put the bytes read.
+ *               sNumBytes   - the number of bytes to read.
+ * Returns:      void.
+ *****************************************************************************/
+void readVal( lenVal*   plv,
+              short     sNumBytes )
+{
+	unsigned char*  pucVal;
+
+	plv->len    = sNumBytes;        /* set the length of the lenVal        */
+	for ( pucVal = plv->val; sNumBytes; --sNumBytes, ++pucVal )
+	{
+		/* read a byte of data into the lenVal */
+		readByte( pucVal );
+	}
+}
--- a/board/esd/common/xilinx_jtag/lenval.h
+++ b/board/esd/common/xilinx_jtag/lenval.h
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: lenval.h                                      */
+/* abstract:  This file contains a description of the  */
+/*            data structure "lenval".                 */
+/*******************************************************/
+
+#ifndef lenval_dot_h
+#define lenval_dot_h
+
+/* the lenVal structure is a byte oriented type used to store an */
+/* arbitrary length binary value. As an example, the hex value   */
+/* 0x0e3d is represented as a lenVal with len=2 (since 2 bytes   */
+/* and val[0]=0e and val[1]=3d.  val[2-MAX_LEN] are undefined    */
+
+/* maximum length (in bytes) of value to read in        */
+/* this needs to be at least 4, and longer than the     */
+/* length of the longest SDR instruction.  If there is, */
+/* only 1 device in the chain, MAX_LEN must be at least */
+/* ceil(27/8) == 4.  For 6 devices in a chain, MAX_LEN  */
+/* must be 5, for 14 devices MAX_LEN must be 6, for 20  */
+/* devices MAX_LEN must be 7, etc..                     */
+/* You can safely set MAX_LEN to a smaller number if you*/
+/* know how many devices will be in your chain.         */
+#define MAX_LEN 7000
+
+
+typedef struct var_len_byte
+{
+	short len;   /* number of chars in this value */
+	unsigned char val[MAX_LEN+1];  /* bytes of data */
+} lenVal;
+
+
+/* return the long representation of a lenVal */
+extern long value(lenVal *x);
+
+/* set lenVal equal to value */
+extern void initLenVal(lenVal *x, long value);
+
+/* check if expected equals actual (taking the mask into account) */
+extern short EqualLenVal(lenVal *expected, lenVal *actual, lenVal *mask);
+
+/* add val1+val2 and put the result in resVal */
+extern void addVal(lenVal *resVal, lenVal *val1, lenVal *val2);
+
+/* return the (byte, bit) of lv (reading from left to right) */
+extern short RetBit(lenVal *lv, int byte, int bit);
+
+/* set the (byte, bit) of lv equal to val (e.g. SetBit("00000000",byte, 1)
+   equals "01000000" */
+extern void SetBit(lenVal *lv, int byte, int bit, short val);
+
+/* read from XSVF numBytes bytes of data into x */
+extern void  readVal(lenVal *x, short numBytes);
+
+#endif
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
--- a/board/esd/common/xilinx_jtag/micro.h
+++ b/board/esd/common/xilinx_jtag/micro.h
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*****************************************************************************
+ * File:         micro.h
+ * Description:  This header file contains the function prototype to the
+ *               primary interface function for the XSVF player.
+ * Usage:        FIRST - PORTS.C
+ *               Customize the ports.c function implementations to establish
+ *               the correct protocol for communicating with your JTAG ports
+ *               (setPort() and readTDOBit()) and tune the waitTime() delay
+ *               function.  Also, establish access to the XSVF data source
+ *               in the readByte() function.
+ *               FINALLY - Call xsvfExecute().
+ *****************************************************************************/
+#ifndef XSVF_MICRO_H
+#define XSVF_MICRO_H
+
+/* Legacy error codes for xsvfExecute from original XSVF player v2.0 */
+#define XSVF_LEGACY_SUCCESS 1
+#define XSVF_LEGACY_ERROR   0
+
+/* 4.04 [NEW] Error codes for xsvfExecute. */
+/* Must #define XSVF_SUPPORT_ERRORCODES in micro.c to get these codes */
+#define XSVF_ERROR_NONE         0
+#define XSVF_ERROR_UNKNOWN      1
+#define XSVF_ERROR_TDOMISMATCH  2
+#define XSVF_ERROR_MAXRETRIES   3   /* TDO mismatch after max retries */
+#define XSVF_ERROR_ILLEGALCMD   4
+#define XSVF_ERROR_ILLEGALSTATE 5
+#define XSVF_ERROR_DATAOVERFLOW 6   /* Data > lenVal MAX_LEN buffer size*/
+/* Insert new errors here */
+#define XSVF_ERROR_LAST         7
+
+/*****************************************************************************
+ * Function:     xsvfExecute
+ * Description:  Process, interpret, and apply the XSVF commands.
+ *               See port.c:readByte for source of XSVF data.
+ * Parameters:   none.
+ * Returns:      int - For error codes see above.
+ *****************************************************************************/
+int xsvfExecute(void);
+
+#endif  /* XSVF_MICRO_H */
--- a/board/esd/common/xilinx_jtag/ports.c
+++ b/board/esd/common/xilinx_jtag/ports.c
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: ports.c                                       */
+/* abstract:  This file contains the routines to       */
+/*            output values on the JTAG ports, to read */
+/*            the TDO bit, and to read a byte of data  */
+/*            from the prom                            */
+/*                                                     */
+/*******************************************************/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include "ports.h"
+
+static unsigned long output = 0;
+static int filepos = 0;
+static int oldstate = 0;
+static int newstate = 0;
+static int readptr = 0;
+
+extern long filesize;
+extern const unsigned char fpgadata[];
+
+
+/* if in debugging mode, then just set the variables */
+void setPort(short p,short val)
+{
+	if (p==TMS) {
+		if (val) {
+			output |= JTAG_TMS;
+		} else {
+			output &= ~JTAG_TMS;
+		}
+	}
+	if (p==TDI) {
+		if (val) {
+			output |= JTAG_TDI;
+		} else {
+			output &= ~JTAG_TDI;
+		}
+	}
+	if (p==TCK) {
+		if (val) {
+			output |= JTAG_TCK;
+		} else {
+			output &= ~JTAG_TCK;
+		}
+		out32(GPIO0_OR, output);
+	}
+}
+
+
+/* toggle tck LH */
+void pulseClock(void)
+{
+	setPort(TCK,0);  /* set the TCK port to low  */
+	setPort(TCK,1);  /* set the TCK port to high */
+}
+
+
+/* read in a byte of data from the prom */
+void readByte(unsigned char *data)
+{
+	/* pretend reading using a file */
+	*data = fpgadata[readptr++];
+	newstate = (100 * filepos++) / filesize;
+	if (newstate != oldstate) {
+		printf("%4d\r\r\r\r", newstate);
+		oldstate = newstate;
+	}
+}
+
+/* read the TDO bit from port */
+unsigned char readTDOBit(void)
+{
+	unsigned long inputs;
+
+	inputs = in32(GPIO0_IR);
+	if (inputs & JTAG_TDO)
+		return 1;
+	else
+		return 0;
+}
+
+
+/* Wait at least the specified number of microsec.                           */
+/* Use a timer if possible; otherwise estimate the number of instructions    */
+/* necessary to be run based on the microcontroller speed.  For this example */
+/* we pulse the TCK port a number of times based on the processor speed.     */
+void waitTime(long microsec)
+{
+	udelay(microsec); /* esd */
+}
--- a/board/esd/common/xilinx_jtag/ports.h
+++ b/board/esd/common/xilinx_jtag/ports.h
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: ports.h                                       */
+/* abstract:  This file contains extern declarations   */
+/*            for providing stimulus to the JTAG ports.*/
+/*******************************************************/
+
+#ifndef ports_dot_h
+#define ports_dot_h
+
+/* these constants are used to send the appropriate ports to setPort */
+/* they should be enumerated types, but some of the microcontroller  */
+/* compilers don't like enumerated types */
+#define TCK (short) 0
+#define TMS (short) 1
+#define TDI (short) 2
+
+/*
+ * Use CFG_FPGA_xxx defines from board include file.
+ */
+#define JTAG_TMS   CFG_FPGA_PRG     /* output */
+#define JTAG_TCK   CFG_FPGA_CLK     /* output */
+#define JTAG_TDI   CFG_FPGA_DATA    /* output */
+#define JTAG_TDO   CFG_FPGA_DONE    /* input */
+
+/* set the port "p" (TCK, TMS, or TDI) to val (0 or 1) */
+void setPort(short p, short val);
+
+/* read the TDO bit and store it in val */
+unsigned char readTDOBit(void);
+
+/* make clock go down->up->down*/
+void pulseClock(void);
+
+/* read the next byte of data from the xsvf file */
+void readByte(unsigned char *data);
+
+void waitTime(long microsec);
+
+#endif
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -433,7 +433,14 @@ int checkboard (void)
 #endif

 	if (ctermm2()) {
-		printf("CTERM-M2 - Id=0x%02x)", *(unsigned char *)0xf0000400);
+		unsigned char str[4];
+
+		/*
+		 * Read board-id and save in env-variable
+		 */
+		sprintf(str, "%d", *(unsigned char *)0xf0000400);
+		setenv("boardid", str);
+		printf("CTERM-M2 - Id=%s)", str);
 	} else {
 		if (cpci405_host()) {
 			puts ("PCI Host Version)");
@@ -508,44 +515,144 @@ void ide_set_reset(int on)
 #endif /* CONFIG_IDE_RESET */
 #endif /* CONFIG_CPCI405_VER2 */

-#if 0 /* test-only */
-/* ------------------------------------------------------------------------- */

-u8 *dhcp_vendorex_prep (u8 * e)
+#ifdef CONFIG_CPCI405AB
+
+#define ONE_WIRE_CLEAR   (*(volatile unsigned short *)0xf0400000 |= 0x0100)
+#define ONE_WIRE_SET     (*(volatile unsigned short *)0xf0400000 &= ~0x0100)
+#define ONE_WIRE_GET     (*(volatile unsigned short *)0xf0400002 & 0x1000)
+
+/*
+ * Generate a 1-wire reset, return 1 if no presence detect was found,
+ * return 0 otherwise.
+ * (NOTE: Does not handle alarm presence from DS2404/DS1994)
+ */
+int OWTouchReset(void)
 {
-	char *ptr;
+	int result;

-/* DHCP vendor-class-identifier = 60 */
-	if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
-		*e++ = 60;
-		*e++ = strlen (ptr);
-		while (*ptr)
-			*e++ = *ptr++;
-	}
-/* my DHCP_CLIENT_IDENTIFIER = 61 */
-	if ((ptr = getenv ("dhcp_client_id"))) {
-		*e++ = 61;
-		*e++ = strlen (ptr);
-		while (*ptr)
-			*e++ = *ptr++;
-	}
+	ONE_WIRE_CLEAR;
+	udelay(480);
+	ONE_WIRE_SET;
+	udelay(70);

-	return e;
+	result = ONE_WIRE_GET;
+
+	udelay(410);
+	return result;
 }


-/* ------------------------------------------------------------------------- */
-
-u8 *dhcp_vendorex_proc (u8 * popt)
+/*
+ * Send 1 a 1-wire write bit.
+ * Provide 10us recovery time.
+ */
+void OWWriteBit(int bit)
 {
-	if (*popt == 61)
-		return (u8 *)-1;
-	if (*popt == 43) {
-		printf("|%s|", popt+4); /* test-only */
-		return (u8 *)-1;
+	if (bit) {
+		/*
+		 * write '1' bit
+		 */
+		ONE_WIRE_CLEAR;
+		udelay(6);
+		ONE_WIRE_SET;
+		udelay(64);
+	} else {
+		/*
+		 * write '0' bit
+		 */
+		ONE_WIRE_CLEAR;
+		udelay(60);
+		ONE_WIRE_SET;
+		udelay(10);
 	}
-	return NULL;
 }

-/* ------------------------------------------------------------------------- */
-#endif /* test-only */
+
+/*
+ * Read a bit from the 1-wire bus and return it.
+ * Provide 10us recovery time.
+ */
+int OWReadBit(void)
+{
+	int result;
+
+	ONE_WIRE_CLEAR;
+	udelay(6);
+	ONE_WIRE_SET;
+	udelay(9);
+
+	result = ONE_WIRE_GET;
+
+	udelay(55);
+	return result;
+}
+
+
+void OWWriteByte(int data)
+{
+	int loop;
+
+	for (loop=0; loop<8; loop++) {
+		OWWriteBit(data & 0x01);
+		data >>= 1;
+	}
+}
+
+
+int OWReadByte(void)
+{
+	int loop, result = 0;
+
+	for (loop=0; loop<8; loop++) {
+		result >>= 1;
+		if (OWReadBit()) {
+			result |= 0x80;
+		}
+	}
+
+	return result;
+}
+
+
+int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	volatile unsigned short val;
+	int result;
+	int i;
+	unsigned char ow_id[6];
+	unsigned char str[32];
+	unsigned char ow_crc;
+
+	/*
+	 * Clear 1-wire bit (open drain with pull-up)
+	 */
+	val = *(volatile unsigned short *)0xf0400000;
+	val &= ~0x1000; /* clear 1-wire bit */
+	*(volatile unsigned short *)0xf0400000 = val;
+
+	result = OWTouchReset();
+	if (result != 0) {
+		puts("No 1-wire device detected!\n");
+	}
+
+	OWWriteByte(0x33); /* send read rom command */
+	OWReadByte(); /* skip family code ( == 0x01) */
+	for (i=0; i<6; i++) {
+		ow_id[i] = OWReadByte();
+	}
+	ow_crc = OWReadByte(); /* read crc */
+
+	sprintf(str, "%08X%04X", *(unsigned int *)&ow_id[0], *(unsigned short *)&ow_id[4]);
+	printf("Setting environment variable 'ow_id' to %s\n", str);
+	setenv("ow_id", str);
+
+	return 0;
+}
+U_BOOT_CMD(
+	onewire,	1,	1,	do_onewire,
+	"onewire - Read 1-write ID\n",
+	NULL
+	);
+
+#endif /* CONFIG_CPCI405AB */
--- a/board/esd/cpci405/fpgadata_cpci405ab.c
+++ b/board/esd/cpci405/fpgadata_cpci405ab.c
--- a/board/esd/dp405/Makefile
+++ b/board/esd/dp405/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+# Objects for Xilinx JTAG programming (CPLD)
+CPLD    = ../common/xilinx_jtag/lenval.o \
+	  ../common/xilinx_jtag/micro.o \
+	  ../common/xilinx_jtag/ports.o
+
+OBJS	= $(BOARD).o flash.o $(CPLD)
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/dp405/config.mk
+++ b/board/esd/dp405/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd VOH405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+
+/* fpga configuration data - not compressed, generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+int filesize = sizeof(fpgadata);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF80);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	/*
+	 * Reset CPLD via GPIO13 (CS4) pin
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(0x80000000 >> 13));
+	udelay(1000); /* wait 1ms */
+	out32(GPIO0_OR, in32(GPIO0_OR) | (0x80000000 >> 13));
+	udelay(1000); /* wait 1ms */
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+	unsigned char trans[16] = {0x0,0x8,0x4,0xc,0x2,0xa,0x6,0xe,
+                                   0x1,0x9,0x5,0xd,0x3,0xb,0x7,0xf};
+	unsigned char id1, id2;
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming DP405");
+	} else {
+		puts(str);
+	}
+
+	id1 = trans[(~(in32(GPIO0_IR) >> 5)) & 0x0000000f];
+	id2 = trans[(~(in32(GPIO0_IR) >> 9)) & 0x0000000f];
+	printf(" (ID=0x%1X%1X)\n", id1, id2);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
--- a/board/esd/dp405/flash.c
+++ b/board/esd/dp405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/dp405/fpgadata.c
+++ b/board/esd/dp405/fpgadata.c
--- a/board/esd/dp405/u-boot.lds
+++ b/board/esd/dp405/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/hub405/Makefile
+++ b/board/esd/hub405/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/hub405/config.mk
+++ b/board/esd/hub405/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd HUB405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
--- a/board/esd/hub405/flash.c
+++ b/board/esd/hub405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF9F);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
+	volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4);
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+	*duart2_mcr = 0x08;
+	*duart3_mcr = 0x08;
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming HUB405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif
--- a/board/esd/hub405/u-boot.lds
+++ b/board/esd/hub405/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -107,5 +107,10 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

 	return 0;
 }
+U_BOOT_CMD(
+	loadpci,	1,	1,	do_loadpci,
+	"loadpci - Wait for pci-image and boot it\n",
+	NULL
+);

 #endif
--- a/board/esd/pci405/fpgadata.c
+++ b/board/esd/pci405/fpgadata.c
--- a/board/esd/plu405/Makefile
+++ b/board/esd/plu405/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/plu405/config.mk
+++ b/board/esd/plu405/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd PLU405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000
--- a/board/esd/plu405/flash.c
+++ b/board/esd/plu405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/plu405/fpgadata.c
+++ b/board/esd/plu405/fpgadata.c
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF99);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+
+#if 1 /* test-only */
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+#endif
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming PLU405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+	volatile unsigned short *fpga_mode =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+
+	/*
+	 * Assert or deassert CompactFlash Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+	} else {		/* release RESET */
+		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+	}
+}
+#endif /* CONFIG_IDE_RESET */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif
--- a/board/esd/plu405/u-boot.lds
+++ b/board/esd/plu405/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/pmc405/Makefile
+++ b/board/esd/pmc405/Makefile
@@ -25,7 +25,12 @@ include $(TOPDIR)/config.mk

 LIB	= lib$(BOARD).a

-OBJS	= $(BOARD).o strataflash.o
+# Objects for Xilinx JTAG programming (CPLD)
+CPLD    = ../common/xilinx_jtag/lenval.o \
+	  ../common/xilinx_jtag/micro.o \
+	  ../common/xilinx_jtag/ports.o
+
+OBJS	= $(BOARD).o strataflash.o $(CPLD)

 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
--- a/board/esd/pmc405/fpgadata.c
+++ b/board/esd/pmc405/fpgadata.c
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -26,11 +26,13 @@
 #include <command.h>
 #include <malloc.h>

-/* ------------------------------------------------------------------------- */

-
-/* Prototypes */
-int gunzip(void *, int, unsigned char *, int *);
+/* fpga configuration data - not compressed, generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+int filesize = sizeof(fpgadata);


 int board_pre_init (void)
@@ -74,104 +76,6 @@ int misc_init_f (void)

 int misc_init_r (void)
 {
-#if 0 /* test-only */
-	DECLARE_GLOBAL_DATA_PTR;
-	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
-	volatile unsigned char *duart0_mcr =
-		(unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr =
-		(unsigned char *)((ulong)DUART1_BA + 4);
-	bd_t *bd = gd->bd;
-	char *	tmp;                    /* Temporary char pointer      */
-	unsigned char *dst;
-	ulong len = sizeof(fpgadata);
-	int status;
-	int index;
-	int i;
-	unsigned long cntrl0Reg;
-
-	/*
-	 * Setup GPIO pins (CS6+CS7 as GPIO)
-	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
-
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
-		printf ("GUNZIP ERROR - must RESET board to recover\n");
-		do_reset (NULL, 0, 0, NULL);
-	}
-
-	status = fpga_boot(dst, len);
-	if (status != 0) {
-		printf("\nFPGA: Booting failed ");
-		switch (status) {
-		case ERROR_FPGA_PRG_INIT_LOW:
-			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_DONE:
-			printf("(Timeout: DONE not high after programming FPGA)\n ");
-			break;
-		}
-
-		/* display infos on fpgaimage */
-		index = 15;
-		for (i=0; i<4; i++) {
-			len = dst[index];
-			printf("FPGA: %s\n", &(dst[index+1]));
-			index += len+3;
-		}
-		putc ('\n');
-		/* delayed reboot */
-		for (i=20; i>0; i--) {
-			printf("Rebooting in %2d seconds \r",i);
-			for (index=0;index<1000;index++)
-				udelay(1000);
-		}
-		putc ('\n');
-		do_reset(NULL, 0, 0, NULL);
-	}
-
-	/* restore gpio/cs settings */
-	mtdcr(cntrl0, cntrl0Reg);
-
-	puts("FPGA:  ");
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i=0; i<4; i++) {
-		len = dst[index];
-		printf("%s ", &(dst[index+1]));
-		index += len+3;
-	}
-	putc ('\n');
-
-	free(dst);
-
-	/*
-	 * Reset FPGA via FPGA_DATA pin
-	 */
-	SET_FPGA(FPGA_PRG | FPGA_CLK);
-	udelay(1000); /* wait 1ms */
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
-	udelay(1000); /* wait 1ms */
-
-	/*
-	 * Enable power on PS/2 interface
-	 */
-	*fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
-
-	/*
-	 * Enable interrupts in exar duart mcr[3]
-	 */
-	*duart0_mcr = 0x08;
-	*duart1_mcr = 0x08;
-#endif
-
 	return (0);
 }

@@ -188,7 +92,7 @@ int checkboard (void)
 	puts ("Board: ");

 	if (i == -1) {
-		puts ("### No HW ID - assuming ABG405");
+		puts ("### No HW ID - assuming PMC405");
 	} else {
 		puts(str);
 	}
--- a/board/esd/voh405/Makefile
+++ b/board/esd/voh405/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/voh405/config.mk
+++ b/board/esd/voh405/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd VOH405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/voh405/fpgadata.c
+++ b/board/esd/voh405/fpgadata.c
--- a/board/esd/voh405/u-boot.lds
+++ b/board/esd/voh405/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -0,0 +1,273 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFFB5);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	volatile unsigned short *lcd_reg =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+
+	/*
+	 * Set default contrast voltage on epson vga controller
+	 */
+	*lcd_reg = 0x4848;
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming VOH405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+	volatile unsigned short *fpga_mode =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+
+	/*
+	 * Assert or deassert CompactFlash Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+	} else {		/* release RESET */
+		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+	}
+}
+#endif /* CONFIG_IDE_RESET */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif
--- a/board/evb64260/evb64260.c
+++ b/board/evb64260/evb64260.c
@@ -237,7 +237,7 @@ int board_pre_init (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-#ifdef CONFIG_ZUMA_V2
+#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	/* Zuma has no SRAM */
 	sram_boot = 0;
 #else
@@ -265,6 +265,7 @@ int board_pre_init (void)
 	GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
 #endif

+#ifdef CONFIG_EVB64260
 #ifdef CFG_32BIT_BOOT_PAR
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD(DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
@@ -280,6 +281,11 @@ int board_pre_init (void)
 	/* 8 bit boot flash only */
 	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
 #endif
+#else /* CONFIG_EVB64260 not defined */
+		/* We are booting from 16-bit flash.
+		 */
+	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_16BIT_BOOT_PAR);
+#endif

 	gt_cpu_config();

@@ -329,7 +335,7 @@ after_reloc(ulong dest_addr)
 	}

 	/* now, jump to the main U-Boot board init code */
-	board_init_r (gd, dest_addr);
+	board_init_r ((gd_t *)gd, dest_addr);

 	/* NOTREACHED */
 }
@@ -351,7 +357,7 @@ checkboard (void)
 void
 debug_led(int led, int mode)
 {
-#ifndef CONFIG_ZUMA_V2
+#if !defined(CONFIG_ZUMA_V2) && !defined(CONFIG_P3G4)
 	volatile int *addr = NULL;
 	int dummy;

--- a/board/evb64260/flash.c
+++ b/board/evb64260/flash.c
@@ -54,6 +54,7 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 static ulong flash_get_size (int portwidth, vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
 static void flash_get_offsets (ulong base, flash_info_t *info);
+static flash_info_t *flash_get_info(ulong base);

 /*-----------------------------------------------------------------------
 */
@@ -72,7 +73,11 @@ flash_init (void)

 	/* the boot flash */
 	base = CFG_FLASH_BASE;
-	size_b0 = flash_get_size(1, (vu_long *)base, &flash_info[0]);
+#ifndef CFG_BOOT_FLASH_WIDTH
+#define CFG_BOOT_FLASH_WIDTH	1
+#endif
+	size_b0 = flash_get_size(CFG_BOOT_FLASH_WIDTH, (vu_long *)base,
+	                         &flash_info[0]);

 	printf("[%ldkB@%lx] ", size_b0/1024, base);

@@ -98,6 +103,22 @@ flash_init (void)
 	    base+=size;
 	}

+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+	              CFG_MONITOR_BASE,
+	              CFG_MONITOR_BASE + monitor_flash_len - 1,
+	              flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef  CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+	              CFG_ENV_ADDR,
+	              CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+	              flash_get_info(CFG_ENV_ADDR));
+#endif
+
 	flash_size = size_b0 + size_b1;
 	return flash_size;
 }
@@ -146,6 +167,23 @@ flash_get_offsets (ulong base, flash_info_t *info)
 	}
 }

+/*-----------------------------------------------------------------------
+ */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+	int i;
+	flash_info_t * info;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+		info = & flash_info[i];
+		if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
+			break;
+	}
+
+	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
 /*-----------------------------------------------------------------------
 */
 void
@@ -247,8 +285,11 @@ static inline void flash_cmd(int width, volatile unsigned char *addr, int offset
 	    /* 2x16 */
 	    unsigned long cmd32=(cmd<<16)|cmd;
 	    *(volatile unsigned long *)(addr+offset*2)=cmd32;
+	} else if (width == 2) {
+	    /* 1x16 */
+	    *(volatile unsigned short *)((unsigned short*)addr+offset)=cmd;
 	} else {
-	    /* 1x16 or 1x8 */
+	    /* 1x8 */
 	    *(volatile unsigned char *)(addr+offset)=cmd;
 	}
 }
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -273,7 +273,7 @@ mpsc_init(int baud)

 	/* BRG CONFIG */
 	galbrg_set_baudrate(CHANNEL, baud);
-#ifdef CONFIG_ZUMA_V2
+#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	galbrg_set_clksrc(CHANNEL,0x8);	/* connect TCLK -> BRG */
 #else
 	galbrg_set_clksrc(CHANNEL,0);
@@ -387,7 +387,7 @@ galbrg_set_baudrate(int channel, int rate)

 	galbrg_disable(channel);

-#ifdef CONFIG_ZUMA_V2
+#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	/* from tclk */
 	clock = (CFG_BUS_HZ/(16*rate)) - 1;
 #else
@@ -803,6 +803,7 @@ static int
 galmpsc_shutdown(int mpsc)
 {
 	DECLARE_GLOBAL_DATA_PTR;
+#if 0
 	unsigned int temp;

 	/* cause RX abort (clears RX) */
@@ -810,9 +811,11 @@ galmpsc_shutdown(int mpsc)
 	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
 	temp &= ~MPSC_ENTER_HUNT;
 	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP,temp);
+#endif

-	GT_REG_WRITE(GALSDMA_0_COM_REG, 0);
-	GT_REG_WRITE(GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+	GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
+	GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
+	             SDMA_TX_ABORT | SDMA_RX_ABORT);

 	/* shut down the MPSC */
 	GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
@@ -823,14 +826,15 @@ galmpsc_shutdown(int mpsc)

 	/* shut down the sdma engines. */
 	/* reset config to default */
-	GT_REG_WRITE(GALSDMA_0_CONF_REG, 0x000000fc);
+	GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
+	             0x000000fc);

 	udelay(100);

 	/* clear the SDMA current and first TX and RX pointers */
-	GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR, 0);
-	GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR, 0);
-	GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR, 0);
+	GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
+	GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
+	GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);

 	udelay(100);

--- a/board/evb64260/sdram_init.c
+++ b/board/evb64260/sdram_init.c
@@ -175,7 +175,30 @@ check_dimm(uchar slot, sdram_info_t *info)
 	return 0;
 }

-#else /* ! CONFIG_ZUMA_V2 */
+#elif defined(CONFIG_P3G4)
+
+static int
+check_dimm(uchar slot, sdram_info_t *info)
+{
+	memset(info, 0, sizeof(*info));
+
+	if (slot)
+		return 0;
+
+	info->slot = slot;
+	info->banks = 1;
+	info->registered = 0;
+	info->drb_size = 4;
+	info->tpar = 3;
+	info->tras_clocks = 6;
+	info->burst_len = 4;
+#ifdef CONFIG_ECC
+	info->ecc = 2;
+#endif
+	return 0;
+}
+
+#else /* ! CONFIG_ZUMA_V2 && ! CONFIG_P3G4*/

 /* This code reads the SPD chip on the sdram and populates
 * the array which is passed in with the relevant information */
--- a/board/exbitgen/flash.c
+++ b/board/exbitgen/flash.c
@@ -217,7 +217,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	short i;
 	FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;

 	/* Write auto select command: read Manufacturer ID */
 	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
@@ -247,7 +247,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)

 	switch (value) {
 	case (FLASH_WORD_SIZE)AMD_ID_F040B:
-	        info->flash_id += FLASH_AM040;
+		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000; /* => 512 ko */
 		break;
@@ -335,14 +335,14 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	}

 	/* set up sector start address table */
-        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
 		(info->flash_id  == FLASH_AM040) ||
 		(info->flash_id == FLASH_AMDLV033C) ||
 		(info->flash_id == FLASH_AMDLV065D)) {
 		ulong sectsize = info->size / info->sector_count;
 		for (i = 0; i < info->sector_count; i++)
 			info->start[i] = base + (i * sectsize);
-        } else {
+	} else {
 	    if (info->flash_id & FLASH_BTYPE) {
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
@@ -370,9 +370,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		/* D0 = 1 if protected */

 		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
 			info->protect[i] = 0;
-                else
+		else
 			info->protect[i] = addr2[2] & 1;
 	}

@@ -450,7 +450,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 			while ((addr2[0] & 0x00800080) !=
 				(FLASH_WORD_SIZE) 0x00800080) {
 				if ((now=get_timer(start)) >
-				           CFG_FLASH_ERASE_TOUT) {
+					   CFG_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					addr[0] = (FLASH_WORD_SIZE)0x00F000F0;
 					return 1;
@@ -551,12 +551,12 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-        volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
-        volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
-        volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
+	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]);
+	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest;
+	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
-        int i;
+	int i;

 	/* Check if Flash is (sufficiently) erased */
 	if ((*((volatile ulong *)dest) & data) != data) {
@@ -565,7 +565,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		return 2;
 	}

-        for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) {
+	for (i=0; i < 4/sizeof(FLASH_WORD_SIZE); i++) {
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();

--- a/board/exbitgen/init.S
+++ b/board/exbitgen/init.S
@@ -34,7 +34,7 @@
 #include <asm/mmu.h>

 #include "exbitgen.h"
-		
+
 /* IIC declarations (This is an extract from 405gp_i2c.h, which also contains some */
 /* c-code declarations and consequently can't be included here). */
 /* (Possibly to be solved somehow else). */
@@ -100,25 +100,25 @@
 #define TIMEBASE_10PS (1000000000 / CONFIG_SYS_CLK_FREQ) * 100

 #define FLASH_8bit_AP   0x9B015480
-#define FLASH_8bit_CR   0xFFF18000 /* 1MB(min), 8bit, R/W */ 
+#define FLASH_8bit_CR   0xFFF18000 /* 1MB(min), 8bit, R/W */

 #define FLASH_32bit_AP  0x9B015480
 #define FLASH_32bit_CR  0xFFE3C000 /* 2MB, 32bit, R/W */


 #define WDCR_EBC(reg,val) addi    r4,0,reg;\
-        mtdcr   ebccfga,r4;\
-        addis   r4,0,val@h;\
-        ori     r4,r4,val@l;\
-        mtdcr   ebccfgd,r4
+	mtdcr   ebccfga,r4;\
+	addis   r4,0,val@h;\
+	ori     r4,r4,val@l;\
+	mtdcr   ebccfgd,r4

 /*---------------------------------------------------------------------
 * Function:     ext_bus_cntlr_init
- * Description:  Initializes the External Bus Controller for the external 
- *		peripherals. IMPORTANT: For pass1 this code must run from 
+ * Description:  Initializes the External Bus Controller for the external
+ *		peripherals. IMPORTANT: For pass1 this code must run from
 *		cache since you can not reliably change a peripheral banks
 *		timing register (pbxap) while running code from that bank.
- *		For ex., since we are running from ROM on bank 0, we can NOT 
+ *		For ex., since we are running from ROM on bank 0, we can NOT
 *		execute the code that modifies bank 0 timings from ROM, so
 *		we run it from cache.
 *	Bank 0 - Boot flash
@@ -126,63 +126,63 @@
 *	Bank 5 - CPLD
 *	Bank 6 - not used
 *	Bank 7 - Heathrow chip
- *---------------------------------------------------------------------	
+ *---------------------------------------------------------------------
 */
-     	.globl	ext_bus_cntlr_init
+	.globl	ext_bus_cntlr_init
 ext_bus_cntlr_init:
-        mflr    r4                      /* save link register */
-        bl      ..getAddr
+	mflr    r4                      /* save link register */
+	bl      ..getAddr
 ..getAddr:
-        mflr    r3                      /* get address of ..getAddr */
-        mtlr    r4                      /* restore link register */
-        addi    r4,0,14                 /* set ctr to 10; used to prefetch */
-        mtctr   r4                      /* 10 cache lines to fit this function */
-                                        /* in cache (gives us 8x10=80 instrctns) */
+	mflr    r3                      /* get address of ..getAddr */
+	mtlr    r4                      /* restore link register */
+	addi    r4,0,14                 /* set ctr to 10; used to prefetch */
+	mtctr   r4                      /* 10 cache lines to fit this function */
+					/* in cache (gives us 8x10=80 instrctns) */
 ..ebcloop:
-        icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-        addi    r3,r3,32		/* move to next cache line */
-        bdnz    ..ebcloop               /* continue for 10 cache lines */
+	icbt    r0,r3                   /* prefetch cache line for addr in r3 */
+	addi    r3,r3,32		/* move to next cache line */
+	bdnz    ..ebcloop               /* continue for 10 cache lines */

 	mflr	r31			/* save link register */
-	
-        /*-----------------------------------------------------------
-         * Delay to ensure all accesses to ROM are complete before changing
+
+	/*-----------------------------------------------------------
+	 * Delay to ensure all accesses to ROM are complete before changing
 	 * bank 0 timings. 200usec should be enough.
-         *   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
-         *-----------------------------------------------------------
+	 *   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
+	 *-----------------------------------------------------------
 	 */

 	addis	r3,0,0x0
-        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
-        mtctr   r3
+	ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+	mtctr   r3
 ..spinlp:
-        bdnz    ..spinlp                /* spin loop */
+	bdnz    ..spinlp                /* spin loop */

-        /*---------------------------------------------------------------
-         * Memory Bank 0 (Boot Flash) initialization
-         *---------------------------------------------------------------
+	/*---------------------------------------------------------------
+	 * Memory Bank 0 (Boot Flash) initialization
+	 *---------------------------------------------------------------
 	 */
 	WDCR_EBC(pb0ap, FLASH_32bit_AP)
 	WDCR_EBC(pb0cr, 0xffe38000)
 /*pnc	WDCR_EBC(pb0cr, FLASH_32bit_CR) */
-	
-        /*---------------------------------------------------------------
-         * Memory Bank 5 (CPLD) initialization
-         *---------------------------------------------------------------
+
+	/*---------------------------------------------------------------
+	 * Memory Bank 5 (CPLD) initialization
+	 *---------------------------------------------------------------
 	 */
 	WDCR_EBC(pb5ap, 0x01010040)
 /*jsa recommendation:		WDCR_EBC(pb5ap, 0x00010040) */
 	WDCR_EBC(pb5cr, 0x10038000)

-        /*--------------------------------------------------------------- */
-        /* Memory Bank 6 (not used) initialization */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 6 (not used) initialization */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb6cr, 0x00000000)

 	/* Read HW ID to determine whether old H2 board or new generic CPU board */
 	addis	r3, 0,  HW_ID_ADDR@h
 	ori	r3, r3, HW_ID_ADDR@l
-        lbz     r3,0x0000(r3)
+	lbz     r3,0x0000(r3)
 	cmpi	0, r3, 1          /* if (HW_ID==1) */
 	beq 	setup_h2evalboard /* then jump */
 	cmpi	0, r3, 2          /* if (HW_ID==2) */
@@ -191,9 +191,9 @@ ext_bus_cntlr_init:
 	beq 	setup_genieboard  /* then jump */

 setup_genieboard:
-        /*--------------------------------------------------------------- */
-        /* Memory Bank 1 (Application Flash) initialization for generic CPU board */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 1 (Application Flash) initialization for generic CPU board */
+	/*--------------------------------------------------------------- */
 /*	WDCR_EBC(pb1ap, 0x7b015480)	/###* T.B.M. */
 /*	WDCR_EBC(pb1ap, 0x7F8FFE80)	/###* T.B.M. */
 	WDCR_EBC(pb1ap, 0x9b015480)	/* hlb-20020207: burst 8 bit 6 cycles  */
@@ -201,68 +201,68 @@ setup_genieboard:
 /*	WDCR_EBC(pb1cr, 0x20098000)	/###* 16 MB */
 	WDCR_EBC(pb1cr, 0x200B8000)	/* 32 MB */

-        /*--------------------------------------------------------------- */
-        /* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb4ap, 0x01010000)	/*  */
 	WDCR_EBC(pb4cr, 0x1021c000)	/*  */

-        /*--------------------------------------------------------------- */
-        /* Memory Bank 7 (Heathrow chip on Reference board) initialization */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 7 (Heathrow chip on Reference board) initialization */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb7ap, 0x200ffe80)	/* No Ready, many wait states (let reflections die out) */
 	WDCR_EBC(pb7cr, 0X4001A000)

 	bl	setup_continue

-	
+
 setup_h2evalboard:
-        /*--------------------------------------------------------------- */
-        /* Memory Bank 1 (Application Flash) initialization */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 1 (Application Flash) initialization */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb1ap, 0x7b015480)	/* T.B.M. */
 /*3010	WDCR_EBC(pb1ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb1cr, 0x20058000) 
-
-        /*--------------------------------------------------------------- */
-        /* Memory Bank 2 (Application Flash) initialization */
-        /*--------------------------------------------------------------- */
-	WDCR_EBC(pb2ap, 0x7b015480)	/* T.B.M. */
-/*3010	WDCR_EBC(pb2ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb2cr, 0x20458000) 
+	WDCR_EBC(pb1cr, 0x20058000)

 	/*--------------------------------------------------------------- */
-        /* Memory Bank 3 (Application Flash) initialization */
-        /*--------------------------------------------------------------- */
+	/* Memory Bank 2 (Application Flash) initialization */
+	/*--------------------------------------------------------------- */
+	WDCR_EBC(pb2ap, 0x7b015480)	/* T.B.M. */
+/*3010	WDCR_EBC(pb2ap, 0x7F8FFE80)	/###* T.B.M. */
+	WDCR_EBC(pb2cr, 0x20458000)
+
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 3 (Application Flash) initialization */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb3ap, 0x7b015480)	/* T.B.M. */
 /*3010	WDCR_EBC(pb3ap, 0x7F8FFE80)	/###* T.B.M. */
-	WDCR_EBC(pb3cr, 0x20858000) 
+	WDCR_EBC(pb3cr, 0x20858000)

-        /*--------------------------------------------------------------- */
-        /* Memory Bank 4 (Application Flash) initialization */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 4 (Application Flash) initialization */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb4ap, 0x7b015480)	/* T.B.M. */
 /*3010	WDCR_EBC(pb4ap, 0x7F8FFE80)	/###* T.B.M. */
 	WDCR_EBC(pb4cr, 0x20C58000)

-        /*--------------------------------------------------------------- */
-        /* Memory Bank 7 (Heathrow chip) initialization */
-        /*--------------------------------------------------------------- */
+	/*--------------------------------------------------------------- */
+	/* Memory Bank 7 (Heathrow chip) initialization */
+	/*--------------------------------------------------------------- */
 	WDCR_EBC(pb7ap, 0x02000280)	/* No Ready, 4 wait states */
 	WDCR_EBC(pb7cr, 0X4001A000)

 setup_continue:

-	
-        mtlr    r31                     /* restore lr	 */
+
+	mtlr    r31                     /* restore lr	 */
 	nop				/* pass2 DCR errata #8 */
-        blr
+	blr

 /*--------------------------------------------------------------------- */
 /* Function:     sdram_init */
 /* Description:  Configures SDRAM memory banks. */
 /*--------------------------------------------------------------------- */
-        .globl  sdram_init
+	.globl  sdram_init

 sdram_init:
 #if CFG_MONITOR_BASE < CFG_FLASH_BASE
@@ -377,12 +377,12 @@ sdram_init:
 	subf	r5, r6, r17
 	or	r4, r4, r5

-        /*----------------------------------------------------------- */
-        /* Set SDTR1  */
-        /*----------------------------------------------------------- */
-        addi    r5,0,mem_sdtr1
-        mtdcr   memcfga,r5
-        mtdcr   memcfgd,r4
+	/*----------------------------------------------------------- */
+	/* Set SDTR1  */
+	/*----------------------------------------------------------- */
+	addi    r5,0,mem_sdtr1
+	mtdcr   memcfga,r5
+	mtdcr   memcfgd,r4

 	/*----------------------------------------------------------- */
 	/* */
@@ -444,36 +444,36 @@ b1skip:	addi    r7,0,mem_mb2cf
 	addi    r7,0,mem_mb3cf
 	mtdcr   memcfga,r7
 	mtdcr   memcfgd,r6
-b3skip:	
+b3skip:

-        /*----------------------------------------------------------- */
-        /* Set RTR */
-        /*----------------------------------------------------------- */
+	/*----------------------------------------------------------- */
+	/* Set RTR */
+	/*----------------------------------------------------------- */
 	cmpi	0, r30, 1600
 	bge	rtr_1
-        addis   r7, 0, 0x05F0	/* RTR value for 100Mhz */
+	addis   r7, 0, 0x05F0	/* RTR value for 100Mhz */
 	bl	rtr_2
 rtr_1:	addis	r7, 0, 0x03F8
 rtr_2:	addi    r4,0,mem_rtr
 	mtdcr   memcfga,r4
 	mtdcr   memcfgd,r7

-        /*----------------------------------------------------------- */
-        /* Delay to ensure 200usec have elapsed since reset. Assume worst */
-        /* case that the core is running 200Mhz: */
-        /*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
-        /*----------------------------------------------------------- */
-        addis   r3,0,0x0000
-        ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
-        mtctr   r3
+	/*----------------------------------------------------------- */
+	/* Delay to ensure 200usec have elapsed since reset. Assume worst */
+	/* case that the core is running 200Mhz: */
+	/*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+	/*----------------------------------------------------------- */
+	addis   r3,0,0x0000
+	ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
+	mtctr   r3
 ..spinlp2:
-        bdnz    ..spinlp2               /* spin loop */
+	bdnz    ..spinlp2               /* spin loop */

-        /*----------------------------------------------------------- */
-        /* Set memory controller options reg, MCOPT1. */
+	/*----------------------------------------------------------- */
+	/* Set memory controller options reg, MCOPT1. */
 	/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst  */
 	/* read/prefetch. */
-        /*----------------------------------------------------------- */
+	/*----------------------------------------------------------- */
 	addi    r4,0,mem_mcopt1
 	mtdcr   memcfga,r4
 	addis   r4,0,0x80C0             /* set DC_EN=1 */
@@ -481,13 +481,13 @@ rtr_2:	addi    r4,0,mem_rtr
 	mtdcr   memcfgd,r4


-        /*----------------------------------------------------------- */
-        /* Delay to ensure 10msec have elapsed since reset. This is */
-        /* required for the MPC952 to stabalize. Assume worst */
-        /* case that the core is running 200Mhz: */
-        /*   200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
-        /* This delay should occur before accessing SDRAM. */
-        /*----------------------------------------------------------- */
+	/*----------------------------------------------------------- */
+	/* Delay to ensure 10msec have elapsed since reset. This is */
+	/* required for the MPC952 to stabalize. Assume worst */
+	/* case that the core is running 200Mhz: */
+	/*   200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
+	/* This delay should occur before accessing SDRAM. */
+	/*----------------------------------------------------------- */
 	addis   r3,0,0x001E
 	ori     r3,r3,0x8480          /* ensure 10msec have passed since reset */
 	mtctr   r3
@@ -501,8 +501,8 @@ rtr_2:	addi    r4,0,mem_rtr
 	stb	r4,0(r5)
 	eieio

-        mtlr    r31                     /* restore lr */
-        blr
+	mtlr    r31                     /* restore lr */
+	blr

 /*--------------------------------------------------------------------- */
 /* Function:    read_spd */
@@ -512,21 +512,21 @@ rtr_2:	addi    r4,0,mem_rtr

 #define WRITE_I2C(reg,val) \
 	addi    r3,0,val;\
-        addis   r4, 0, 0xef60;\
-        ori     r4, r4, 0x0500 + reg;\
-        stb     r3, 0(r4);\
-        eieio
+	addis   r4, 0, 0xef60;\
+	ori     r4, r4, 0x0500 + reg;\
+	stb     r3, 0(r4);\
+	eieio

 #define READ_I2C(reg) \
-        addis   r3, 0, 0xef60;\
-        ori     r3, r3, 0x0500 + reg;\
-        lbz     r3, 0x0000(r3);\
-        eieio
+	addis   r3, 0, 0xef60;\
+	ori     r3, r3, 0x0500 + reg;\
+	lbz     r3, 0x0000(r3);\
+	eieio

 read_spd:

 	mflr	r5
-	
+
 	/* Initialize i2c */
 	/*--------------- */
 	WRITE_I2C(IICLMADR, 0x00)	/* clear lo master address */
@@ -558,9 +558,9 @@ read_spd:

 	/* Wait a little */
 	/*-------------- */
-        addis   r3,0,0x0000
-        ori     r3,r3,0xA000
-        mtctr   r3
+	addis   r3,0,0x0000
+	ori     r3,r3,0xA000
+	mtctr   r3
 in02:	bdnz    in02

 	/* Issue write command */
@@ -572,12 +572,12 @@ in02:	bdnz    in02
 	/*--------------- */
 	addi	r7, 0, 0	/* byte counter in r7 */
 	addi	r8, 0, 0	/* checksum in r8 */
-rdlp:	
+rdlp:
 	/* issue read command */
 	/*------------------- */
 	cmpi	0, r7, 127
 	blt	rd01
-	WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT) 
+	WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT)
 	bl	rd02
 rd01:	WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_CHT | IIC_CNTL_PT)
 rd02:	bl	wait_i2c_transfer_done
@@ -585,46 +585,46 @@ rd02:	bl	wait_i2c_transfer_done
 	/* Fetch byte from buffer */
 	/*----------------------- */
 	READ_I2C(IICMDBUF)
-	
+
 	/* Retrieve parameters that are going to be used during configuration. */
 	/* Save them in dedicated registers. */
 	/*------------------------------------------------------------ */
 	cmpi	0, r7, 3	/* Save byte 3 in r10 */
 	bne	rd10
-	addi	r10, r3, 0	
+	addi	r10, r3, 0
 rd10:	cmpi	0, r7, 4	/* Save byte 4 in r11 */
 	bne	rd11
-	addi	r11, r3, 0	
+	addi	r11, r3, 0
 rd11:	cmpi	0, r7, 5	/* Save byte 5 in r12 */
 	bne	rd12
-	addi	r12, r3, 0	
+	addi	r12, r3, 0
 rd12:	cmpi	0, r7, 17	/* Save byte 17 in r13 */
 	bne	rd13
-	addi	r13, r3, 0	
+	addi	r13, r3, 0
 rd13:	cmpi	0, r7, 18	/* Save byte 18 in r14 */
 	bne	rd14
-	addi	r14, r3, 0	
+	addi	r14, r3, 0
 rd14:	cmpi	0, r7, 31	/* Save byte 31 in r15 */
 	bne	rd15
-	addi	r15, r3, 0	
+	addi	r15, r3, 0
 rd15:	cmpi	0, r7, 27	/* Save byte 27 in r16 */
 	bne	rd16
-	addi	r16, r3, 0	
+	addi	r16, r3, 0
 rd16:	cmpi	0, r7, 29	/* Save byte 29 in r17 */
 	bne	rd17
-	addi	r17, r3, 0	
+	addi	r17, r3, 0
 rd17:	cmpi	0, r7, 30	/* Save byte 30 in r18 */
 	bne	rd18
-	addi	r18, r3, 0	
+	addi	r18, r3, 0
 rd18:	cmpi	0, r7, 9	/* Save byte 9 in r19 */
 	bne	rd19
-	addi	r19, r3, 0	
+	addi	r19, r3, 0
 rd19:	cmpi	0, r7, 23	/* Save byte 23 in r20 */
 	bne	rd20
-	addi	r20, r3, 0	
+	addi	r20, r3, 0
 rd20:	cmpi	0, r7, 25	/* Save byte 25 in r21 */
 	bne	rd21
-	addi	r21, r3, 0	
+	addi	r21, r3, 0
 rd21:

 	/* Calculate checksum of the first 63 bytes */
@@ -647,16 +647,16 @@ rd30:	andi.	r8, r8, 0xff		/* use only 8 bits */
 	eieio
 rderr:	bl	rderr

-rd31:	
-	
+rd31:
+
 	/* Increment byte counter and check whether all bytes have been read. */
 	/*------------------------------------------------------------------- */
 	addi	r7, r7, 1
 	cmpi	0, r7, 127
 	bgt	rd05
 	bl	rdlp
-rd05:	
-        mtlr    r5                     /* restore lr */
+rd05:
+	mtlr    r5                     /* restore lr */
 	blr

 wait_i2c_transfer_done:
@@ -664,8 +664,8 @@ wait_i2c_transfer_done:
 wt01:	READ_I2C(IICSTS)
 	andi.	r4, r3, IIC_STS_PT
 	cmpi	0, r4, IIC_STS_PT
-	beq	wt01	
-        mtlr    r6                     /* restore lr */
+	beq	wt01
+	mtlr    r6                     /* restore lr */
 	blr

 /*--------------------------------------------------------------------- */
@@ -696,7 +696,7 @@ fm01:	cmpi	0, r10, 11
 	cmpi	0, r13, 2
 	bne	fm02
 	addi	r3, 0, 1
-	bl	fmfound	
+	bl	fmfound

 fm02:	cmpi	0, r10, 12
 	bne	fm03
@@ -815,7 +815,7 @@ fm14:	cmpi	0, r10, 13
 	addi	r3, 0, 7
 	bl	fmfound

-fm15:	
+fm15:
 	/* not found, error code to be issued on LEDs */
 	addi	r7, 0, LED_SDRAM_CODE_2
 	addis	r6, 0, 0x1000
@@ -827,7 +827,7 @@ fmerr:	bl	fmerr
 fmfound:addi	r6, 0, 1
 	subf	r3, r6, r3

-        mtlr    r5                     /* restore lr */
+	mtlr    r5                     /* restore lr */
 	blr

 /*--------------------------------------------------------------------- */
@@ -838,13 +838,13 @@ fmfound:addi	r6, 0, 1
 find_size_code:

 	mflr	r5
-	
+
 	addi	r3, r15, 0	/* density */
 	addi	r7, 0, 0
 fs01:	andi.	r6, r3, 0x01
 	cmpi	0, r6, 1
 	beq	fs04
-	
+
 	addi	r7, r7, 1
 	cmpi	0, r7, 7
 	bge	fs02
@@ -866,7 +866,7 @@ fs04:	addi	r3, r7, 0
 	addi	r6, 0, 1
 	subf	r3, r6, r3
 fs05:
-        mtlr    r5                     /* restore lr */
+	mtlr    r5                     /* restore lr */
 	blr

 /*--------------------------------------------------------------------- */
@@ -895,9 +895,9 @@ fc01:	srw	r6, r14, r4	/*  */
 	addi	r7, r19, 0	/* SDRAM cycle time for highest CAS latenty */

 	bl	fc03
-fc02:	
+fc02:
 	addi	r7, r20, 0	/* SDRAM cycle time for next-highest CAS latenty */
-fc03:	
+fc03:
 	addi	r8, r7, 0
 	addi	r9, 0, 4
 	srw	r7, r7, r9
@@ -910,7 +910,7 @@ fc03:
 	bgt	fc05
 	addi	r3, r2, 0
 	bl	fc05
-fc04:	
+fc04:
 	addi	r7, r21, 0	/* SDRAM cycle time for third-highest CAS latenty */
 	addi	r8, r7, 0
 	addi	r9, 0, 2
@@ -933,9 +933,9 @@ fc06:	addi	r6, 0, 1
 	cmpi	0, r4, 0
 	bne	fc01

-fc07:	
+fc07:

-        mtlr    r5		/* restore lr */
+	mtlr    r5		/* restore lr */
 	blr
 #endif

@@ -1000,7 +1000,7 @@ fc07:
 /* Size:	2 MB */
 /* Usage:	read/write */
 /* Width:	32 bit */
-	
+
 /* Walnut fpga pb7ap */
 /* 0      1      8         1         5         2         8            0 */
 /* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */
--- a/board/exbitgen/u-boot.lds
+++ b/board/exbitgen/u-boot.lds
@@ -98,7 +98,7 @@ SECTIONS
  PROVIDE (erotext = .);
  .reloc   :
  {
-    *(.got) 
+    *(.got)
    _GOT2_TABLE_ = .;
    *(.got2)
    _FIXUP_TABLE_ = .;
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
--- a/board/flagadm/flagadm.c
+++ b/board/flagadm/flagadm.c
@@ -128,7 +128,7 @@ long int initdram (int board_type)

 	/* That should do it, just enable the periodic refresh in burst of 4*/
 	memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_4X;
-	memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_B4DIS);
+	memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_A4DIS);

 	size_b0 = 16*1024*1024;

@@ -141,7 +141,7 @@ long int initdram (int board_type)

 	upmconfig(UPMB, (uint *)dsp_disp_table, sizeof(dsp_disp_table)/sizeof(uint));

-	memctl->memc_mbmr = MAMR_GPL_B4DIS;
+	memctl->memc_mbmr = MBMR_GPL_B4DIS;

 	memctl->memc_or4 = CFG_OR4;
 	memctl->memc_br4 = CFG_BR4;
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -303,7 +303,7 @@ board_poweroff(void)
 }

 #ifdef CONFIG_POST
-/* 
+/*
 * Returns 1 if keys pressed to start the power-on long-running tests
 * Called from board_init_f().
 */
--- a/board/genietv/genietv.c
+++ b/board/genietv/genietv.c
@@ -163,7 +163,7 @@ long int initdram (int board_type)
    memctl->memc_mcr  = 0x80804105;	/* SDRAM bank 1 */

    /* Execute refresh 8 times */
-    memctl->memc_mbmr = (CFG_MBMR_8COL & ~MAMR_TLFB_MSK) | MAMR_TLFB_8X ;
+    memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X ;

    memctl->memc_mcr  = 0x80802130;	/* SDRAM bank 0 - execute twice */

--- a/board/gth/gth.c
+++ b/board/gth/gth.c
@@ -218,7 +218,7 @@ int _initsdram (uint base, uint * noMbytes)
 			   sizeof (fpga_table) / sizeof (uint));

 	/* Enable UPWAITB */
-	mc->memc_mbmr = MAMR_GPL_B4DIS;	/* (16-13) */
+	mc->memc_mbmr = MBMR_GPL_B4DIS;	/* (16-13) */

 	/* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
 	mc->memc_or2 = 0xffc00000 | OR_BI;
--- a/board/icecube/Makefile
+++ b/board/icecube/Makefile
@@ -0,0 +1,47 @@
+
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/icecube/config.mk
+++ b/board/icecube/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# IceCube board
+#
+
+TEXT_BASE = 0xfff00000
+# TEXT_BASE = 0x00100000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- a/board/icecube/flash.c
+++ b/board/icecube/flash.c
@@ -0,0 +1,491 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
+ *        has nothing to do with the flash chip being 8-bit or 16-bit.
+ */
+#ifdef CONFIG_FLASH_16BIT
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+#define	FLASH_ID_MASK	0xFFFF
+#else
+typedef unsigned char FLASH_PORT_WIDTH;
+typedef volatile unsigned char FLASH_PORT_WIDTHV;
+#define	FLASH_ID_MASK	0xFF
+#endif
+
+#define FPW	FLASH_PORT_WIDTH
+#define FPWV	FLASH_PORT_WIDTHV
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+#define FLASH_CYCLE1	0x0555
+#define FLASH_CYCLE2	0x02aa
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(FPWV *addr, flash_info_t *info);
+static void flash_reset(flash_info_t *info);
+static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
+static flash_info_t *flash_get_info(ulong base);
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size = 0;
+	int i;
+	extern void flash_preinit(void);
+	extern void flash_afterinit(ulong);
+	ulong flashbase = CFG_FLASH_BASE;
+
+	flash_preinit();
+
+	/* Init: no FLASHes known */
+	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		memset(&flash_info[i], 0, sizeof(flash_info_t));
+
+		flash_info[i].size =
+			flash_get_size((FPW *)flashbase, &flash_info[i]);
+
+		size += flash_info[i].size;
+		flashbase += 0x800000;
+	}
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      flash_get_info(CFG_ENV_ADDR));
+#endif
+
+
+	flash_afterinit(size);
+	return size ? size : 1;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_reset(flash_info_t *info)
+{
+	FPWV *base = (FPWV *)(info->start[0]);
+
+	/* Put FLASH back in read mode */
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
+		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
+	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
+		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+	int i;
+	flash_info_t * info;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+		info = & flash_info[i];
+		if (info->size && 
+			info->start[0] <= base && base <= info->start[0] + info->size - 1)
+			break;
+	}
+
+	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info (flash_info_t *info)
+{
+	int i;
+	uchar *boottype;
+	uchar *bootletter;
+	uchar *fmt;
+	uchar botbootletter[] = "B";
+	uchar topbootletter[] = "T";
+	uchar botboottype[] = "bottom boot sector";
+	uchar topboottype[] = "top boot sector";
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_SST:	printf ("SST ");		break;
+	case FLASH_MAN_STM:	printf ("STM ");		break;
+	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	/* check for top or bottom boot, if it applies */
+	if (info->flash_id & FLASH_BTYPE) {
+		boottype = botboottype;
+		bootletter = botbootletter;
+	}
+	else {
+		boottype = topboottype;
+		bootletter = topbootletter;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMDLV065D:
+		fmt = "29LV065 (64 Mbit, uniform sectors)\n";
+		break;
+	default:
+		fmt = "Unknown Chip Type\n";
+		break;
+	}
+
+	printf (fmt, bootletter, boottype);
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20,
+		info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+ulong flash_get_size (FPWV *addr, flash_info_t *info)
+{
+	int i;
+	FPWV* addr2;
+
+	/* Write auto select command: read Manufacturer ID */
+	/* Write auto select command sequence and test FLASH answer */
+	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
+	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
+	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
+
+	/* The manufacturer codes are only 1 byte, so just use 1 byte.
+	 * This works for any bus width and any FLASH device width.
+	 */
+	udelay(100);
+	switch (addr[0] & 0xff) {
+
+	case (uchar)AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+
+	case (uchar)INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		break;
+	}
+
+	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
+	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
+
+	case (FPW)AMD_ID_LV065D:
+		info->flash_id += FLASH_AMDLV065D;
+		info->sector_count = 128;
+		info->size = 0x00800000;
+		for( i = 0; i < info->sector_count; i++ )
+			info->start[i] = (ulong)addr + (i * 0x10000);
+		break;				/* => 8 or 16 MB	*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* => no or unknown flash */
+	}
+
+	/* test for real flash at bank 1 */
+	addr2 = (FPW *)((ulong)addr | 0x800000);
+	if (addr2 != addr &&
+		((addr2[0] & 0xff) == (addr[0] & 0xff)) && ((FPW)addr2[1] == (FPW)addr[1])) {
+		/* Seems 2 banks are the same space (8Mb chip is installed, 
+		 * J24 in default position (CS0)). Disable this (first) bank.
+		 */
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+	}
+	/* Put FLASH back in read mode */
+	flash_reset(info);
+
+	return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	FPWV *addr;
+	int flag, prot, sect;
+	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
+	ulong start, now, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AMDLV065D:
+		break;
+	case FLASH_UNKNOWN:
+	default:
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	last  = get_timer(0);
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
+
+		if (info->protect[sect] != 0)	/* protected, skip it */
+			continue;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr = (FPWV *)(info->start[sect]);
+		if (intel) {
+			*addr = (FPW)0x00500050; /* clear status register */
+			*addr = (FPW)0x00200020; /* erase setup */
+			*addr = (FPW)0x00D000D0; /* erase confirm */
+		}
+		else {
+			/* must be AMD style if not Intel */
+			FPWV *base;		/* first address in bank */
+
+			base = (FPWV *)(info->start[0]);
+			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
+			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
+			base[FLASH_CYCLE1] = (FPW)0x00800080;	/* erase mode */
+			base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
+			base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
+			*addr = (FPW)0x00300030;	/* erase sector */
+		}
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		start = get_timer(0);
+
+		/* wait at least 50us for AMD, 80us for Intel.
+		 * Let's wait 1 ms.
+		 */
+		udelay (1000);
+
+		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
+			if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				printf ("Timeout\n");
+
+				if (intel) {
+					/* suspend erase	*/
+					*addr = (FPW)0x00B000B0;
+				}
+
+				flash_reset(info);	/* reset to read mode */
+				rcode = 1;		/* failed */
+				break;
+			}
+
+			/* show that we're waiting */
+			if ((get_timer(last)) > CFG_HZ) {/* every second */
+				putc ('.');
+				last = get_timer(0);
+			}
+		}
+
+		/* show that we're waiting */
+		if ((get_timer(last)) > CFG_HZ) {	/* every second */
+			putc ('.');
+			last = get_timer(0);
+		}
+
+		flash_reset(info);	/* reset to read mode	*/
+	}
+
+	printf (" done\n");
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
+	int bytes;	  /* number of bytes to program in current word		*/
+	int left;	  /* number of bytes left to program			*/
+	int i, res;
+
+	for (left = cnt, res = 0;
+		 left > 0 && res == 0;
+		 addr += sizeof(data), left -= sizeof(data) - bytes) {
+
+		bytes = addr & (sizeof(data) - 1);
+		addr &= ~(sizeof(data) - 1);
+
+		/* combine source and destination data so can program
+		 * an entire word of 16 or 32 bits
+		 */
+		for (i = 0; i < sizeof(data); i++) {
+			data <<= 8;
+			if (i < bytes || i - bytes >= left )
+				data += *((uchar *)addr + i);
+			else
+				data += *src++;
+		}
+
+		/* write one word to the flash */
+		switch (info->flash_id & FLASH_VENDMASK) {
+		case FLASH_MAN_AMD:
+			res = write_word_amd(info, (FPWV *)addr, data);
+			break;
+		default:
+			/* unknown flash type, error! */
+			printf ("missing or unknown FLASH type\n");
+			res = 1;	/* not really a timeout, but gives error */
+			break;
+		}
+	}
+
+	return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash for AMD FLASH
+ * A word is 16 or 32 bits, whichever the bus width of the flash bank
+ * (not an individual chip) is.
+ *
+ * returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
+{
+	ulong start;
+	int flag;
+	int res = 0;	/* result, assume success	*/
+	FPWV *base;		/* first address in flash bank	*/
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*dest & data) != data) {
+		return (2);
+	}
+
+
+	base = (FPWV *)(info->start[0]);
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
+	base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
+	base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
+
+	*dest = data;		/* start programming the data	*/
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	start = get_timer (0);
+
+	/* data polling for D7 */
+	while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			*dest = (FPW)0x00F000F0;	/* reset bank */
+			res = 1;
+		}
+	}
+
+	return (res);
+}
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+
+#ifndef CFG_RAMBOOT
+static long int dram_size(long int *base, long int maxsize)
+{
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+
+static void sdram_start (int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
+	/* set mode register */
+#if defined(CONFIG_MPC5200)
+	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000;
+#elif defined(CONFIG_MGT5100)
+	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+#endif
+	/* precharge all banks */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
+	/* auto refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
+	/* set mode register */
+	*(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+	/* normal operation */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
+}
+#endif
+
+long int initdram (int board_type)
+{
+	ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+	ulong test1, test2;
+
+	/* configure SDRAM start/end */
+#if defined(CONFIG_MPC5200)
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
+#elif defined(CONFIG_MGT5100)
+	*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+	*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
+	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+
+	/* setup config registers */
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600;
+	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
+	/* address select register */
+	*(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
+#endif
+	sdram_start(0);
+	test1 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+#if defined(CONFIG_MPC5200)
+	*(vu_long *)MPC5XXX_SDRAM_CS0CFG =
+		(0x13 + __builtin_ffs(dramsize >> 20) - 1);
+	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+#elif defined(CONFIG_MGT5100)
+	*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+#endif
+
+#else
+#ifdef CONFIG_MGT5100
+	*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+	dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
+#else
+	dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
+#endif
+#endif /* CFG_RAMBOOT */
+	/* return total ram size */
+	return dramsize;
+}
+
+int checkboard (void)
+{
+#if defined(CONFIG_MPC5200)
+	puts ("Board: Motorola MPC5200 (IceCube)\n");
+#elif defined(CONFIG_MGT5100)
+	puts ("Board: Motorola MGT5100 (IceCube)\n");
+#endif
+	return 0;
+}
+
+void flash_preinit(void)
+{
+	/*
+	 * Now, when we are in RAM, enable flash write
+	 * access for detection process.
+	 * Note that CS_BOOT cannot be cleared when
+	 * executing in flash.
+	 */
+#if defined(CONFIG_MGT5100)
+	*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+	*(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+#endif
+	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+}
+
+void flash_afterinit(ulong size)
+{
+	if (size == 0x800000) { /* adjust mapping */
+		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = 
+			START_REG(CFG_BOOTCS_START | size);
+		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = 
+			STOP_REG(CFG_BOOTCS_START | size, size);
+	}
+}
+
+#ifdef	CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+	pci_mpc5xxx_init(&hose);
+}
+#endif
--- a/board/icecube/u-boot.lds
+++ b/board/icecube/u-boot.lds
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc5xxx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/icu862/u-boot.lds
+++ b/board/icu862/u-boot.lds
@@ -136,11 +136,6 @@ SECTIONS
   *(.bss)
   *(COMMON)
  }
-  . = ALIGN(256 * 1024);
-  .ppcenv	:
-  {
-    common/environment.o (.ppcenv)
-  }
  _end = . ;
  PROVIDE (end = .);
 }
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -246,14 +246,14 @@ initdram (int board_type)
    udelay(1);
    memctl->memc_mcr = 0x80806130;	/* autorefresh */

-    memctl->memc_mbmr |= MAMR_PTBE;	/* refresh enabled */
+    memctl->memc_mbmr |= MBMR_PTBE;	/* refresh enabled */

    /*
     * Check Bank 0 Memory Size for re-configuration
     */
    size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);

-    memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
+    memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;

    return (size_b0);
 }
--- a/board/lantec/lantec.c
+++ b/board/lantec/lantec.c
@@ -149,7 +149,7 @@ long int initdram (int board_type)
 	udelay(1);		/* 0x80006106 */
 	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x06);

-	memctl->memc_mamr |= MAMR_PTBE;	/* refresh enabled */
+	memctl->memc_mamr |= MAMR_PTAE;	/* refresh enabled */

 	udelay(200);

@@ -170,7 +170,7 @@ long int initdram (int board_type)
 			     (ulong *)SDRAM_BASE3_PRELIM,
 			     SDRAM_MAX_SIZE);

-	memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+	memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;

 	/*
 	 * Final mapping:
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -246,7 +246,7 @@ long int initdram (int board_type)
 	udelay (1);				/* 0x80006106 */
 	memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);

-	memctl->memc_mamr |= MAMR_PTBE;	/* refresh enabled */
+	memctl->memc_mamr |= MAMR_PTAE;	/* refresh enabled */

 	udelay (200);

@@ -276,11 +276,11 @@ long int initdram (int board_type)

 	if (size8 < size9) {		/* leave configuration at 9 columns */
 		size_b0 = size9;
-		memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTBE;
+		memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
 		udelay (500);
 	} else {			/* back to 8 columns            */
 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+		memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
 		udelay (500);
 	}

@@ -1073,11 +1073,11 @@ static int key_pressed(void)
 #endif	/* CONFIG_MODEM_SUPPORT */

 #ifdef CONFIG_POST
-/* 
+/*
 * Returns 1 if keys pressed to start the power-on long-running tests
 * Called from board_init_f().
 */
-int post_hotkeys_pressed(gd_t *gd)
+int post_hotkeys_pressed(void)
 {
 	uchar kbd_data[KEYBD_DATALEN];
 	uchar val;
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -35,6 +35,7 @@
 #include <common.h>
 #include <ioports.h>
 #include <mpc8260.h>
+#include <asm/m8260_pci.h>
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
@@ -198,11 +199,19 @@ void reset_phy (void)
 	vu_long *bcsr = (vu_long *)CFG_BCSR;

 	/* reset the FEC port */
-	bcsr[1] &= ~FETH_RST;
+	bcsr[1] &= ~FETH1_RST;
 	udelay(2);
-	bcsr[1] |=  FETH_RST;
+	bcsr[1] |=  FETH1_RST;
 	udelay(1000);
 #ifdef CONFIG_MII
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+	/*
+	 * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
+	 * Enable autonegotiation.
+	 */
+	miiphy_write(0, 16, 0x610);
+	miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#else
 	/*
 	 * Ethernet PHY is configured (by means of configuration pins)
 	 * to work at 10Mb/s only. We reconfigure it using MII
@@ -212,6 +221,7 @@ void reset_phy (void)
 	miiphy_write(0, PHY_ANAR, 0x01E1); /* Advertise all capabilities */
 	miiphy_write(0, PHY_DCR,  0x0000); /* Do not bypass Rx/Tx (de)scrambler */
 	miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
 #endif /* CONFIG_MII */
 }

@@ -219,7 +229,7 @@ int board_pre_init (void)
 {
 	vu_long *bcsr = (vu_long *)CFG_BCSR;

-	bcsr[1] = ~FETHIEN & ~RS232EN_1;
+	bcsr[1] = ~FETHIEN1 & ~RS232EN_1;

 	return 0;
 }
@@ -228,15 +238,16 @@ int board_pre_init (void)

 long int initdram (int board_type)
 {
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+	vu_long *bcsr = (vu_long *)CFG_BCSR;
+#endif
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *ramaddr, c = 0xff;
-
-	/* Initialisation is for 16MB DIMM the board is shipped with */
-	long int msize = 16;
-	uint or    = 0xFF000CA0;
-	uint psdmr = CFG_PSDMR;
-	uint psrt  = CFG_PSRT;
+	long int msize;
+	uint or;
+	uint psdmr;
+	uint psrt;

 	int i;

@@ -245,23 +256,44 @@ long int initdram (int board_type)
 	immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
 	immap->im_siu_conf.sc_tescr1   = 0x00004000;

-	memctl->memc_mptpr = CFG_MPTPR;
-	/* init local sdram, bank 4 */
-	memctl->memc_lsrt  = 0x00000010;
-	memctl->memc_or4   = 0xFFC01480;
-	memctl->memc_br4   = 0x04001861;
-	memctl->memc_lsdmr = 0x2886A522;
-	ramaddr = (uchar *) CFG_LSDRAM_BASE;
-	*ramaddr = c;
-	memctl->memc_lsdmr = 0x0886A522;
-	for (i = 0; i < 8; i++) {
-		*ramaddr = c;
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+	if ((bcsr[3] & BCSR_PCI_MODE) == 0) { /* PCI mode selected by JP9 */
+		immap->im_clkrst.car_sccr |= M826X_SCCR_PCI_MODE_EN;
+		immap->im_siu_conf.sc_siumcr =
+			(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
+			| SIUMCR_LBPC01;
 	}
-	memctl->memc_lsdmr = 0x1886A522;
-	*ramaddr = c;
-	memctl->memc_lsdmr = 0x4086A522;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */

-	/* init sdram dimm */
+	memctl->memc_mptpr = CFG_MPTPR;
+#ifdef CFG_LSDRAM_BASE
+	/*
+	  Initialise local bus SDRAM only if the pins
+	  are configured as local bus pins and not as PCI.
+	  The configuration is determined by the HRCW.
+	*/
+	if ((immap->im_siu_conf.sc_siumcr & SIUMCR_LBPC11) == SIUMCR_LBPC00) {
+		memctl->memc_lsrt  = CFG_LSRT;
+#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
+		memctl->memc_or3   = 0xFF803280;
+		memctl->memc_br3   = CFG_LSDRAM_BASE | 0x00001861;
+#else  				  /* CS4 */
+		memctl->memc_or4   = 0xFFC01480;
+		memctl->memc_br4   = CFG_LSDRAM_BASE | 0x00001861;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+		memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
+		ramaddr = (uchar *) CFG_LSDRAM_BASE;
+		*ramaddr = c;
+		memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
+		for (i = 0; i < 8; i++)
+			*ramaddr = c;
+		memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
+		*ramaddr = c;
+		memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
+	}
+#endif /* CFG_LSDRAM_BASE */
+
+	/* Init 60x bus SDRAM */
 #ifdef CONFIG_SPD_EEPROM
 	{
 		spd_eeprom_t spd;
@@ -398,6 +430,16 @@ long int initdram (int board_type)
 		printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
 #endif /* SPD_DEBUG */
 	}
+#else  /* !CONFIG_SPD_EEPROM */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+	msize = 32;
+	or = 0xFE002EC0;
+#else
+	msize = 16;
+	or = 0xFF000CA0;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+	psdmr = CFG_PSDMR;
+	psrt  = CFG_PSRT;
 #endif /* CONFIG_SPD_EEPROM */
 	memctl->memc_psrt = psrt;
 	memctl->memc_or2 = or;
@@ -415,12 +457,20 @@ long int initdram (int board_type)
 	*ramaddr = c;
 #endif

-	/* return total ram size of DIMM */
+	/* return total 60x bus SDRAM size */
 	return (msize * 1024 * 1024);
 }

 int checkboard (void)
 {
+#if   CONFIG_ADSTYPE == CFG_8260ADS
 	puts ("Board: Motorola MPC8260ADS\n");
+#elif CONFIG_ADSTYPE == CFG_8266ADS
+	puts ("Board: Motorola MPC8266ADS\n");
+#elif CONFIG_ADSTYPE == CFG_PQ2FADS
+	puts ("Board: Motorola PQ2FADS-ZU\n");
+#else
+	puts ("Board: unknown\n");
+#endif
 	return 0;
 }
--- a/board/mpc8266ads/mpc8266ads.c
+++ b/board/mpc8266ads/mpc8266ads.c
@@ -46,7 +46,7 @@
 *   PSDMR_BUFCMD adds a clock
 *   0            no extra clock
 */
-#define CONFIG_PBI		PSDMR_PBI
+#define CONFIG_PBI		0
 #define PESSIMISTIC_SDRAM	0
 #define EAMUX			0	/* EST requires EAMUX */
 #define BUFCMD			0
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -375,138 +375,6 @@ void show_stdio_dev(void)
 	}
 }

-/* ------------------------------------------------------------------------- */
-
-	/* switches the cs0 and the cs1 to the locations.
-	   When boot is TRUE, the the mapping is switched
-	   to the boot configuration, If it is FALSE, the
-	   flash will be switched in the boot area */
-
-#undef SW_CS_DBG
-#ifdef SW_CS_DBG
-#define	SW_CS_PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define SW_CS_PRINTF(fmt,args...)
-#endif
-
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
-int switch_cs(unsigned char boot)
-{
-	unsigned long pbcr;
-	int mode;
-
-	mode=get_boot_mode();
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr (ebccfgd);
-	if (mode & BOOT_MPS) {
-		/* Boot width = 8 bit MPS Boot, set up MPS on CS0 */
-		/* we need only to switch if boot from MPS */
-		/* printf(" MPS boot mode detected. ");*/
-		/* printf("cs0 cfg: %lx\n",pbcr); */
-		if(boot) {
-			/* switch to boot configuration */
-			/* this is a 8bit boot, switch cs0 to flash location */
-			SW_CS_PRINTF("switch to boot mode (MPS on High address\n");
-			pbcr&=0x000FFFFF; /*mask base address of the cs0 */
-			pbcr|=(FLASH_BASE0_PRELIM & 0xFFF00000);
-			mtdcr(ebccfga, pb0cr);
-			mtdcr(ebccfgd, pbcr);
-			SW_CS_PRINTF("  new cs0 cfg: %lx\n",pbcr);
-			mtdcr(ebccfga, pb1cr); /* get cs1 config reg (flash) */
-			pbcr = mfdcr(ebccfgd);
-			SW_CS_PRINTF(" old cs1 cfg: %lx\n",pbcr);
-			pbcr&=0x000FFFFF; /*mask base address of the cs1 */
-			pbcr|=(MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000);
-			mtdcr(ebccfga, pb1cr);
-			mtdcr(ebccfgd, pbcr);
-			SW_CS_PRINTF("  new cs1 cfg: %lx, MPS is on High Address\n",pbcr);
-		}
-		else {
-			/* map flash to boot area, */
-			SW_CS_PRINTF("map Flash to boot area\n");
-			pbcr&=0x000FFFFF; /*mask base address of the cs0 */
-			pbcr|=(MULTI_PURPOSE_SOCKET_ADDR & 0xFFF00000);
-			mtdcr(ebccfga, pb0cr);
-			mtdcr(ebccfgd, pbcr);
-			SW_CS_PRINTF("  new cs0 cfg: %lx\n",pbcr);
-			mtdcr(ebccfga, pb1cr); /* get cs1 config reg (flash) */
-			pbcr = mfdcr(ebccfgd);
-			SW_CS_PRINTF("  cs1 cfg: %lx\n",pbcr);
-			pbcr&=0x000FFFFF; /*mask base address of the cs1 */
-			pbcr|=(FLASH_BASE0_PRELIM & 0xFFF00000);
-			mtdcr(ebccfga, pb1cr);
-			mtdcr(ebccfgd, pbcr);
-			SW_CS_PRINTF("  new cs1 cfg: %lx Flash is on High Address\n",pbcr);
-		}
-		return 1;
-	}
-	else {
-		SW_CS_PRINTF("Normal boot, no switching necessary\n");
-		return 0;
-	}
-
-}
-
-int get_boot_mode(void)
-{
-	unsigned long pbcr;
-	int res = 0;
-	pbcr = mfdcr (strap);
-	if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
-		/* boot via MPS or MPS mapping */
-		res = BOOT_MPS;
-	if(pbcr & PSR_ROM_LOC)
-		/* boot via PCI.. */
-		res |= BOOT_PCI;
-	 return res;
-}
-
-/* Setup cs0 parameter finally.
-   Map the flash high (in boot area)
-   This code can only be executed from SDRAM (after relocation).
-*/
-void setup_cs_reloc(void)
-{
-	unsigned long pbcr;
-	/* Since we are relocated, we can set-up the CS finaly
-	 * but first of all, switch off PCI mapping (in case it was a PCI boot) */
-	out32r(PMM0MA,0L);
-	icache_enable (); /* we are relocated */
-	/* for PCI Boot, we have to set-up the remaining CS correctly */
-	pbcr = mfdcr (strap);
-	if(pbcr & PSR_ROM_LOC) {
-		/* boot via PCI.. */
-		if ((pbcr & PSR_ROM_WIDTH_MASK) == 0) {
-		/* Boot width = 8 bit MPS Boot, set up MPS on CS0 */
-			#ifdef DEBUG
-			printf("Mapping MPS to CS0 @ 0x%lx\n",(MPS_CR_B & 0xfff00000));
-			#endif
-			mtdcr (ebccfga, pb0ap);
-			mtdcr (ebccfgd, MPS_AP);
-			mtdcr (ebccfga, pb0cr);
-			mtdcr (ebccfgd, MPS_CR_B);
-		}
-		else {
-			/* Flash boot, set up the Flash on CS0 */
-			#ifdef DEBUG
-			printf("Mapping Flash to CS0 @ 0x%lx\n",(FLASH_CR_B & 0xfff00000));
-			#endif
-			mtdcr (ebccfga, pb0ap);
-			mtdcr (ebccfgd, FLASH_AP);
-			mtdcr (ebccfga, pb0cr);
-			mtdcr (ebccfgd, FLASH_CR_B);
-		}
-	}
-	switch_cs(0); /* map Flash High */
-}
-
-
-#elif defined(CONFIG_VCMA9)
-int switch_cs(unsigned char boot)
-{
-    return 0;
-}
-#endif /* CONFIG_VCMA9 */

 int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -625,6 +493,7 @@ void doc_init (void)

 #ifdef CONFIG_CONSOLE_EXTRA_INFO
 extern GraphicDevice ctfb;
+extern int get_boot_mode(void);

 void video_get_info_str (int line_number, char *info)
 {
--- a/board/mpl/common/common_util.h
+++ b/board/mpl/common/common_util.h
@@ -31,10 +31,8 @@ typedef struct {
 } backup_t;

 void get_backup_values(backup_t *buf);
-int switch_cs(unsigned char boot);
+
 #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
-int get_boot_mode(void);
-void setup_cs_reloc(void);
 #define BOOT_MPS	0x01
 #define BOOT_PCI	0x02
 #endif
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -39,6 +39,13 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include "common_util.h"
+#if defined(CONFIG_MIP405)
+#include "../mip405/mip405.h"
+#endif
+#if defined(CONFIG_PIP405)
+#include "../pip405/pip405.h"
+#endif
+#include <405gp_pci.h>

 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 /*-----------------------------------------------------------------------
@@ -66,23 +73,102 @@ void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
 #define TRUE            1

 /*-----------------------------------------------------------------------
+ * Some CS switching routines:
+ *
+ * On PIP/MIP405 we have 3 (4) possible boot mode
+ *
+ * - Boot from Flash (Flash CS = CS0, MPS CS = CS1)
+ * - Boot from MPS   (Flash CS = CS1, MPS CS = CS0)
+ * - Boot from PCI with Flash map (Flash CS = CS0, MPS CS = CS1)
+ * - Boot from PCI with MPS map   (Flash CS = CS1, MPS CS = CS0)
+ * The flash init is the first board specific routine which is called
+ * after code relocation (running from SDRAM)
+ * The first thing we do is to map the Flash CS to the Flash area and
+ * the MPS CS to the MPS area. Since the flash size is unknown at this
+ * point, we use the max flash size and the lowest flash address as base.
+ * 
+ * After flash detection we adjust the size of the CS area accordingly.
+ * The board_init_r will fill in wrong values in the board init structure,
+ * but this will be fixed in the misc_init_r routine:
+ * bd->bi_flashstart=0-flash_info[0].size
+ * bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN
+ * bd->bi_flashoffset=0
+ * 
 */
+int get_boot_mode(void)
+{
+	unsigned long pbcr;
+	int res = 0;
+	pbcr = mfdcr (strap);
+	if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
+		/* boot via MPS or MPS mapping */
+		res = BOOT_MPS;
+	if(pbcr & PSR_ROM_LOC)
+		/* boot via PCI.. */
+		res |= BOOT_PCI;
+	 return res;
+}
+
+/* Map the flash high (in boot area)
+   This code can only be executed from SDRAM (after relocation).
+*/
+void setup_cs_reloc(void)
+{
+	int mode;
+	/* Since we are relocated, we can set-up the CS finaly
+	 * but first of all, switch off PCI mapping (in case it was a PCI boot) */
+	out32r(PMM0MA,0L);
+	icache_enable (); /* we are relocated */
+	/* get boot mode */
+	mode=get_boot_mode();
+	/* we map the flash high in every case */
+	/* first findout on which cs the flash is */
+	if(mode & BOOT_MPS) {
+		/* map flash high on CS1 and MPS on CS0 */
+		mtdcr (ebccfga, pb0ap);
+		mtdcr (ebccfgd, MPS_AP);
+		mtdcr (ebccfga, pb0cr);
+		mtdcr (ebccfgd, MPS_CR);
+		/* we use the default values (max values) for the flash
+		 * because its real size is not yet known */
+		mtdcr (ebccfga, pb1ap);
+		mtdcr (ebccfgd, FLASH_AP);
+		mtdcr (ebccfga, pb1cr);
+		mtdcr (ebccfgd, FLASH_CR_B);
+	}
+	else {
+		/* map flash high on CS0 and MPS on CS1 */
+		mtdcr (ebccfga, pb1ap);
+		mtdcr (ebccfgd, MPS_AP);
+		mtdcr (ebccfga, pb1cr);
+		mtdcr (ebccfgd, MPS_CR);
+		/* we use the default values (max values) for the flash
+		 * because its real size is not yet known */
+		mtdcr (ebccfga, pb0ap);
+		mtdcr (ebccfgd, FLASH_AP);
+		mtdcr (ebccfga, pb0cr);
+		mtdcr (ebccfgd, FLASH_CR_B);
+	}
+}
+


 unsigned long flash_init (void)
 {
-	unsigned long size_b0, size_b1;
-	int i;
+	unsigned long size_b0, size_b1,flashcr;
+	int mode, i;
+	extern char version_string;
+	char *p=&version_string;

 	/* Since we are relocated, we can set-up the CS finally */
 	setup_cs_reloc();
 	/* get and display boot mode */
-	i=get_boot_mode();
-	if(i & BOOT_PCI)
-		printf("(PCI Boot %s Map) ",(i & BOOT_MPS) ?
+	mode=get_boot_mode();
+	if(mode & BOOT_PCI)
+		printf("(PCI Boot %s Map) ",(mode & BOOT_MPS) ?
 			"MPS" : "Flash");
 	else
-		printf("(%s Boot) ",(i & BOOT_MPS) ?
+		printf("(%s Boot) ",(mode & BOOT_MPS) ?
 			"MPS" : "Flash");
 	/* Init: no FLASHes known */
 	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
@@ -91,7 +177,7 @@ unsigned long flash_init (void)

 	/* Static FLASH Bank configuration here - FIXME XXX */

-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CFG_MONITOR_BASE, &flash_info[0]);

 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
@@ -105,10 +191,35 @@ unsigned long flash_init (void)
 			CFG_MONITOR_BASE+monitor_flash_len-1,
 			&flash_info[0]);
 #endif
+	/* protect reset vector */
+	flash_info[0].protect[flash_info[0].sector_count-1] = 1;
 	size_b1 = 0 ;
 	flash_info[0].size = size_b0;
+	/* set up flash cs according to the size */
+	if(mode & BOOT_MPS) {
+		/* flash is on CS1 */
+		mtdcr(ebccfga, pb1cr);
+		flashcr = mfdcr (ebccfgd);
+		/* we map the flash high in every case */
+		flashcr&=0x0001FFFF; /* mask out address bits */
+		flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
+		flashcr|= (((flash_info[0].size >>21) & 0x07) << 17); /* size addr */
+		mtdcr(ebccfga, pb1cr);
+		mtdcr(ebccfgd, flashcr);
+	}
+	else {
+		/* flash is on CS0 */
+		mtdcr(ebccfga, pb0cr);
+		flashcr = mfdcr (ebccfgd);
+		/* we map the flash high in every case */
+		flashcr&=0x0001FFFF; /* mask out address bits */
+		flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
+		flashcr|= (((flash_info[0].size >>21) & 0x07) << 17); /* size addr */
+		mtdcr(ebccfga, pb0cr);
+		mtdcr(ebccfgd, flashcr);
+	}
 #if 0
-	/* include this if you want to test if
+	/* enable this if you want to test if
 	   the relocation has be done ok.
 	   This will disable both Chipselects */
 	mtdcr (ebccfga, pb0cr);
@@ -117,6 +228,14 @@ unsigned long flash_init (void)
 	mtdcr (ebccfgd, 0L);
 	printf("CS0 & CS1 switched off for test\n");
 #endif
+	/* patch version_string */
+	for(i=0;i<0x100;i++) {
+		if(*p=='\n') {
+			*p=0;
+			break;
+		}
+		p++;
+	}
 	return (size_b0);
 }

@@ -169,6 +288,8 @@ void flash_print_info  (flash_info_t *info)
 				break;
 	case FLASH_INTEL320T:	printf ("TE28F320C3 (32 Mbit, top sector size)\n");
 				break;
+	case FLASH_AM640U:	printf ("AM29LV640U (64 Mbit, uniform sector size)\n");
+				break;
 	default:		printf ("Unknown Chip Type\n");
 				break;
 	}
@@ -209,7 +330,8 @@ void flash_print_info  (flash_info_t *info)


 /*-----------------------------------------------------------------------
- */
+ 
+*/

 /*
 * The following code cannot be run from FLASH!
@@ -218,7 +340,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 {
 	short i;
 	FLASH_WORD_SIZE value;
-	ulong base = (ulong)addr;
+	ulong base;
 	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;

 	/* Write auto select command: read Manufacturer ID */
@@ -248,7 +370,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		return (0);			/* no or unknown flash	*/
 	}
 	value = addr2[1];			/* device ID		*/
-	/*	printf("Device value %x\n",value); */
+	/*	printf("Device value %x\n",value); 		    */
 	switch (value) {
 	case (FLASH_WORD_SIZE)AMD_ID_F040B:
 		info->flash_id += FLASH_AM040;
@@ -290,12 +412,17 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		info->sector_count = 35;
 		info->size = 0x00200000;
 		break;				/* => 2 MB		*/
-#if 0	/* enable when device IDs are available */
 	case (FLASH_WORD_SIZE)AMD_ID_LV320T:
 		info->flash_id += FLASH_AM320T;
 		info->sector_count = 67;
 		info->size = 0x00400000;
 		break;				/* => 4 MB		*/
+	case (FLASH_WORD_SIZE)AMD_ID_LV640U:
+		info->flash_id += FLASH_AM640U;
+		info->sector_count = 128;
+		info->size = 0x00800000;
+		break;				/* => 8 MB		*/
+#if 0	/* enable when device IDs are available */

 	case (FLASH_WORD_SIZE)AMD_ID_LV320B:
 		info->flash_id += FLASH_AM320B;
@@ -326,10 +453,12 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		return (0);			/* => no or unknown flash */

 	}
-
+	/* base address calculation */
+	base=0-info->size;
 	/* set up sector start address table */
 	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	     (info->flash_id  == FLASH_AM040)){
+	     (info->flash_id  == FLASH_AM040) ||
+	     (info->flash_id  == FLASH_AM640U)){
 		for (i = 0; i < info->sector_count; i++)
 			info->start[i] = base + (i * 0x00010000);
 	}
--- a/board/mpl/common/isa.c
+++ b/board/mpl/common/isa.c
@@ -32,7 +32,6 @@
 #include "kbd.h"
 #include "video.h"

-extern int drv_isa_kbd_init (void);

 #undef	ISA_DEBUG

@@ -49,6 +48,9 @@ extern int drv_isa_kbd_init (void);
 #define FALSE           0
 #endif

+#if defined(CONFIG_PIP405)
+
+extern int drv_isa_kbd_init (void);

 /* fdc (logical device 0) */
 const SIO_LOGDEV_TABLE sio_fdc[] = {
@@ -183,7 +185,7 @@ void isa_sio_setup(void)
 		close_cfg_super_IO(0x3F0);
 	}
 }
-
+#endif

 /******************************************************************************
 * IRQ Controller
@@ -202,7 +204,7 @@ static struct isa_irq_action isa_irqs[16];
 /*
 * This contains the irq mask for both 8259A irq controllers,
 */
-static unsigned int cached_irq_mask = 0xffff;
+static unsigned int cached_irq_mask = 0xfff9;

 #define cached_imr1	(unsigned char)cached_irq_mask
 #define cached_imr2	(unsigned char)(cached_irq_mask>>8)
@@ -387,19 +389,22 @@ int handle_isa_int(void)
 	isr2=in8(ISR_2);
 	isr1=in8(ISR_1);
 	irq=(unsigned char)irqack;
-	if((irq==7)&&((isr1&0x80)==0)) {
+	irq-=32;
+/*	if((irq==7)&&((isr1&0x80)==0)) {
 		PRINTF("IRQ7 detected but not in ISR\n");
 	}
 	else {
-		/* we should handle cascaded interrupts here also */
-		/* printf("ISA Irq %d\n",irq); */
-		isa_irqs[irq].count++;
-	if (isa_irqs[irq].handler != NULL)
-		(*isa_irqs[irq].handler)(isa_irqs[irq].arg);      /* call isr */
-	else
+*/		/* we should handle cascaded interrupts here also */
 	{
-	PRINTF ("bogus interrupt vector 0x%x\n", irq);
-	}
+/*		printf("ISA Irq %d\n",irq); */
+		isa_irqs[irq].count++;
+		if(irq!=2) { /* just swallow the cascade irq 2 */
+			if (isa_irqs[irq].handler != NULL)
+				(*isa_irqs[irq].handler)(isa_irqs[irq].arg);      /* call isr */
+			else {
+				PRINTF ("bogus interrupt vector 0x%x\n", irq);
+			}
+		}
 	}
 	/* issue EOI instruction to clear the IRQ */
 	mask_and_ack_8259A(irq);
@@ -413,13 +418,13 @@ int handle_isa_int(void)

 void isa_irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
 {
-  if (isa_irqs[vec].handler != NULL) {
-   printf ("ISA Interrupt vector %d: handler 0x%x replacing 0x%x\n",
-	   vec, (uint)handler, (uint)isa_irqs[vec].handler);
-  }
-  isa_irqs[vec].handler = handler;
-  isa_irqs[vec].arg     = arg;
-  enable_8259A_irq(vec);
+	if (isa_irqs[vec].handler != NULL) {
+		printf ("ISA Interrupt vector %d: handler 0x%x replacing 0x%x\n",
+			vec, (uint)handler, (uint)isa_irqs[vec].handler);
+	}
+	isa_irqs[vec].handler = handler;
+	isa_irqs[vec].arg     = arg;
+	enable_8259A_irq(vec);
 	PRINTF ("Install ISA IRQ %d ==> %p, @ %p mask=%04x\n", vec, handler, &isa_irqs[vec].handler,cached_irq_mask);

 }
@@ -427,9 +432,9 @@ void isa_irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
 void isa_irq_free_handler(int vec)
 {
 	disable_8259A_irq(vec);
-  isa_irqs[vec].handler = NULL;
-  isa_irqs[vec].arg     = NULL;
-	printf ("Free ISA IRQ %d mask=%04x\n", vec, cached_irq_mask);
+	isa_irqs[vec].handler = NULL;
+	isa_irqs[vec].arg     = NULL;
+	PRINTF ("Free ISA IRQ %d mask=%04x\n", vec, cached_irq_mask);

 }

@@ -448,16 +453,42 @@ void isa_init_irq_contr(void)
 	init_8259A();
 	out8(IMR_2,0xFF);
 }
+/*************************************************************************/

+void isa_show_irq(void)
+{
+	int vec;
+
+	printf ("\nISA Interrupt-Information:\n");
+	printf ("Nr  Routine   Arg       Count\n");
+
+	for (vec=0; vec<16; vec++) {
+		if (isa_irqs[vec].handler != NULL) {
+			printf ("%02d  %08lx  %08lx  %d\n",
+				vec,
+				(ulong)isa_irqs[vec].handler,
+				(ulong)isa_irqs[vec].arg,
+				isa_irqs[vec].count);
+		}
+	}
+}
+
+int isa_irq_get_count(int vec)
+{
+	return(isa_irqs[vec].count);
+}

 /******************************************************************
 * Init the ISA bus and devices.
 */

+#if defined(CONFIG_PIP405)

 int isa_init(void)
 {
 	isa_sio_setup();
+	isa_init_irq_contr();
 	drv_isa_kbd_init();
 	return 0;
 }
+#endif
--- a/board/mpl/common/isa.h
+++ b/board/mpl/common/isa.h
@@ -21,12 +21,12 @@
 * MA 02111-1307 USA
 */

-#ifndef _PIP405_ISA_H_
-#define _PIP405_ISA_H_
+#ifndef _ISA_H_
+#define _ISA_H_
 /* Super IO */
 #define SIO_CFG_PORT	0x3F0	/* Config Port Address */

-
+#if defined(CONFIG_PIP405)
 /* table fore SIO initialization */
 typedef struct {
 	const uchar index;
@@ -44,10 +44,14 @@ unsigned char read_cfg_super_IO(int address, unsigned char function, unsigned ch
 void write_cfg_super_IO(int address, unsigned char function, unsigned char regaddr, unsigned char data);
 void close_cfg_super_IO(int address);
 void isa_sio_setup(void);
-void isa_sio_setup(void);
+#endif
+
 void isa_irq_install_handler(int vec, interrupt_handler_t *handler, void *arg);
 void isa_irq_free_handler(int vec);
 int handle_isa_int(void);
+void isa_init_irq_contr(void);
+void isa_show_irq(void);
+int isa_irq_get_count(int vec);


 #endif
--- a/board/mpl/common/memtst.c
+++ b/board/mpl/common/memtst.c
@@ -494,7 +494,7 @@ void mem_test_reloc(void)
 }


-int mem_test (unsigned long start, unsigned long ramsize, int quiet, int reloc)
+int mem_test (unsigned long start, unsigned long ramsize, int quiet)
 {
 	unsigned long errors, stage;
 	unsigned long startaddr, size, i;
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -92,7 +92,7 @@ extern void pci_pip405_write_regs(struct pci_controller *,
 /* PIIX4 ISA Bridge Function 0 */
 static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
 	{PCI_CFG_PIIX4_SERIRQ,	0xD0,		1}, /* enable Continous SERIRQ Pin */
-	{PCI_CFG_PIIX4_GENCFG,	0x00010041,	4}, /* enable SERIRQs, ISA, PNP	*/
+	{PCI_CFG_PIIX4_GENCFG,	0x00018041,	4}, /* enable SERIRQs, ISA, PNP, GPI11 */
 	{PCI_CFG_PIIX4_TOM,	0xFE,		1}, /* Top of Memory		*/
 	{PCI_CFG_PIIX4_XBCS,	0x02C4,		2}, /* disable all peri CS	*/
 	{PCI_CFG_PIIX4_RTCCFG,	0x21,		1}, /* enable RTC	   	*/
@@ -106,11 +106,12 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {

 /* PIIX4 IDE Controller Function 1 */
 static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
+	{PCI_CFG_PIIX4_BMIBA,	0x0001000,	4}, /* set BMI to a valid address */
 	{PCI_COMMAND,		0x0001,		2}, /* enable IO access 	*/
 #if !defined(CONFIG_MIP405T)
 	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
 #else
-	{PCI_CFG_PIIX4_IDETIM,	0x80000000,	4}, /* enable IDE channel0	*/
+	{PCI_CFG_PIIX4_IDETIM,	0x00008000,	4}, /* enable IDE channel0	*/
 #endif
 	{ }					    /* end of device table 	*/
 };
@@ -129,10 +130,10 @@ static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {

 /* PIIX4 Power Management Function 3 */
 static struct pci_pip405_config_entry piix4_pmm_cntrl_f3[] = {
-	{PCI_COMMAND,		0x0001,		2}, /* enable IO access 	*/
-	{PCI_CFG_PIIX4_PMAB,	0x00004000,	4}, /* set PMBA to "valid" value */
-	{PCI_CFG_PIIX4_PMMISC,	0x01,		1}, /* enable PMBA IO access	*/
+	{PCI_CFG_PIIX4_PMBA,	0x00004000,	4}, /* set PMBA to "valid" value */
 	{PCI_CFG_PIIX4_SMBBA,	0x00005000,	4}, /* set SMBBA to "valid" value */
+	{PCI_CFG_PIIX4_PMMISC,	0x01,		1}, /* enable PMBA IO access	*/
+	{PCI_COMMAND,		0x0001,		2}, /* enable IO access 	*/
 	{ }					    /* end of device table 	*/
 };
 /* PPC405 Dummy only used to prevent autosetup on this host bridge */
--- a/board/mpl/common/piix4_pci.h
+++ b/board/mpl/common/piix4_pci.h
@@ -143,7 +143,7 @@
 #define	PCI_CFG_PIIX4_LEGSUP	0xC0

 /* Function 3 Power Management */
-#define	PCI_CFG_PIIX4_PMAB		0x40
+#define	PCI_CFG_PIIX4_PMBA		0x40
 #define	PCI_CFG_PIIX4_CNTA		0x44
 #define	PCI_CFG_PIIX4_CNTB		0x48
 #define	PCI_CFG_PIIX4_GPICTL	0x4C
--- a/board/mpl/mip405/cmd_mip405.c
+++ b/board/mpl/mip405/cmd_mip405.c
@@ -54,10 +54,13 @@ int do_mip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	return (do_mplcommon(cmdtp, flag, argc, argv));
 }
 U_BOOT_CMD(
-	mip405,	6,	1,	do_mip405,
+	mip405,	8,	1,	do_mip405,
 	"mip405  - MIP405 specific Cmds\n",
 	"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
 	"mip405 flash mps - updates U-Boot with image from MPS\n"
+	"mip405 info      - displays board information\n"
+	"mip405 led <on>  - switches LED on (on=1) or off (on=0)\n"
+	"mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n"
 );

 /* ------------------------------------------------------------------------- */
--- a/board/mpl/mip405/init.S
+++ b/board/mpl/mip405/init.S
@@ -87,19 +87,15 @@ ext_bus_cntlr_init:
 	mfdcr		r4,ebccfgd

 	andi.		r0, r4, 0x2000			/* mask out irrelevant bits */
-	beq			0f						/* jump if 8 bit bus width */
+	beq		0f				/* jump if 8 bit bus width */

-	/* setup 16 bit things (Flash Boot)
+	/* setup 16 bit things
   *-----------------------------------------------------------------------
   * Memory Bank 0 (16 Bit Flash) initialization
   *---------------------------------------------------------------------- */

 	addi    r4,0,pb0ap
 	mtdcr   ebccfga,r4
-/*	addis   r4,0,0xFF8F */
-/*	ori     r4,r4,0xFE80 */
-/*	addis   r4,0,0x9B01 */
-/*	ori     r4,r4,0x5480 */
 	addis   r4,0,(FLASH_AP_B)@h
 	ori     r4,r4,(FLASH_AP_B)@l
 	mtdcr   ebccfgd,r4
@@ -107,8 +103,6 @@ ext_bus_cntlr_init:
 	addi    r4,0,pb0cr
 	mtdcr   ebccfga,r4
 	/* BS=0x010(4MB),BU=0x3(R/W), */
-/*	addis   r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h */
-/*	ori     r4,r4,0xA000          / * BW=0x01(16 bits) */
 	addis   r4,0,(FLASH_CR_B)@h
 	ori     r4,r4,(FLASH_CR_B)@l
 	mtdcr   ebccfgd,r4
@@ -123,21 +117,13 @@ ext_bus_cntlr_init:
 	/* 0x7F8FFE80 slowest boot */
 	addi    r4,0,pb0ap
 	mtdcr   ebccfga,r4
-#if 0
-	addis   r4,0,0x9B01
-	ori     r4,r4,0x5480
-#else
 	addis   r4,0,(MPS_AP_B)@h
 	ori     r4,r4,(MPS_AP_B)@l
-#endif
 	mtdcr   ebccfgd,r4

 	addi    r4,0,pb0cr
 	mtdcr   ebccfga,r4
 	/* BS=0x010(4MB),BU=0x3(R/W), */
-/*	addis   r4,0,((FLASH_BASE0_PRELIM & 0xFFF00000) | 0x00050000)@h */
-/*	ori     r4,r4,0x8000          / * BW=0x0( 8 bits) */
-
 	addis   r4,0,(MPS_CR_B)@h
 	ori     r4,r4,(MPS_CR_B)@l

@@ -178,18 +164,18 @@ ext_bus_cntlr_init:
  ori     r4,r4,0x0000
  mtdcr   ebccfgd,r4

-	addi    r4,0,pb6cr
+  addi    r4,0,pb6cr
  mtdcr   ebccfga,r4
  addis   r4,0,0x0000
  ori     r4,r4,0x0000
  mtdcr   ebccfgd,r4

-	addi    r4,0,pb7cr
+  addi    r4,0,pb7cr
  mtdcr   ebccfga,r4
  addis   r4,0,0x0000
  ori     r4,r4,0x0000
  mtdcr   ebccfgd,r4
-	nop				/* pass2 DCR errata #8 */
+  nop				/* pass2 DCR errata #8 */
  blr

 /*-----------------------------------------------------------------------------
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -69,6 +69,7 @@
 #include <miiphy.h>
 #include "../common/common_util.h"
 #include <i2c.h>
+#include <rtc.h>
 extern block_dev_desc_t * scsi_get_dev(int dev);
 extern block_dev_desc_t * ide_get_dev(int dev);

@@ -110,14 +111,14 @@ typedef struct {
 } sdram_t;
 #if defined(CONFIG_MIP405T)
 const sdram_t sdram_table[] = {
-	{ 0x01,	/* MIP405T Rev A, 64MByte -1 Board */
+	{ 0x0F,	/* MIP405T Rev A, 64MByte -1 Board */
 		3,	/* Case Latenty = 3 */
 		3,	/* trp 20ns / 7.5 ns datain[27] */
 		3,	/* trcd 20ns /7.5 ns (datain[29]) */
 		6,	/* tras 44ns /7.5 ns  (datain[30]) */
 		4,	/* tcpt 44 - 20ns = 24ns */
-		3,	/* Address Mode = 3 (13x9x4) */
-		4,	/* size value (64MByte) */
+		2,	/* Address Mode = 2 (12x9x4) */
+		3,	/* size value (32MByte) */
 		0},	/* ECC disabled */
 	{ 0xff, /* terminator */
 	  0xff,
@@ -281,11 +282,6 @@ int init_sdram (void)
 	if((bc & 0x80)==0x80)
 		SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n");
 #endif
-#if !defined(CONFIG_MIP405T)
-	/* since the ECC initialisation needs some time,
-	 * we show that we're alive
-	 */
-	serial_puts ("\nInitializing SDRAM, Please stand by");
 	/* set-up the chipselect machine */
 	mtdcr (ebccfga, pb0cr);		/* get cs0 config reg */
 	tmp = mfdcr (ebccfgd);
@@ -311,7 +307,6 @@ int init_sdram (void)
 	mtdcr (ebccfgd, UART1_AP);
 	mtdcr (ebccfga, pb3cr);
 	mtdcr (ebccfgd, UART1_CR);
-#endif
 	bc = in8 (PLD_BOARD_CFG_REG);
 #ifdef SDRAM_DEBUG
 	serial_puts ("\nstart SDRAM Setup\n");
@@ -333,6 +328,11 @@ int init_sdram (void)
 	write_hex (i);
 	serial_puts (" \n");
 #endif
+	/* since the ECC initialisation needs some time,
+	 * we show that we're alive
+	 */
+	if (sdram_table[i].ecc)
+		serial_puts ("\nInitializing SDRAM, Please stand by");
 	cal_val = sdram_table[i].cal - 1;	/* Cas Latency */
 	trp_clocks = sdram_table[i].trp;	/* 20ns / 7.5 ns datain[27] */
 	trcd_clocks = sdram_table[i].trcd;	/* 20ns /7.5 ns (datain[29]) */
@@ -559,7 +559,7 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
 	unsigned char bc;
 	bc = in8 (PLD_BOARD_CFG_REG);
 	*pcbrev=(bc >> 4) & 0xf;
-	*var=bc & 0xf ;
+	*var=16-(bc & 0xf);
 #endif
 }

@@ -654,8 +654,6 @@ long int initdram (int board_type)

 /* ------------------------------------------------------------------------- */

-extern int mem_test (unsigned long start, unsigned long ramsize,
-					 int quiet);

 static int test_dram (unsigned long ramsize)
 {
@@ -666,8 +664,22 @@ static int test_dram (unsigned long ramsize)
 	return (1);
 }

+/* used to check if the time in RTC is valid */
+static unsigned long start;
+static struct rtc_time tm;
+extern flash_info_t flash_info[];	/* info for FLASH chips */
+
 int misc_init_r (void)
 {
+	DECLARE_GLOBAL_DATA_PTR;
+	/* adjust flash start and size as well as the offset */
+	gd->bd->bi_flashstart=0-flash_info[0].size;
+	gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
+	gd->bd->bi_flashoffset=0;
+
+	/* check, if RTC is running */
+	rtc_get (&tm);
+	start=get_timer(0);
 	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
 	if (mfdcr(strap) & PSR_ROM_LOC)
 	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
@@ -688,9 +700,13 @@ void print_mip405_rev (void)
 }

 extern void mem_test_reloc(void);
+extern int mk_date (char *, struct rtc_time *);

 int last_stage_init (void)
 {
+	unsigned long stop;
+	struct rtc_time newtm;
+	unsigned char *s;
 	mem_test_reloc();
 	/* write correct LED configuration */
 	if (miiphy_write (0x1, 0x14, 0x2402) != 0) {
@@ -704,6 +720,25 @@ int last_stage_init (void)
 	print_mip405_rev ();
 	show_stdio_dev ();
 	check_env ();
+	/* check if RTC time is valid */
+	stop=get_timer(start);
+	while(stop<1200) {   /* we wait 1.2 sec to check if the RTC is running */
+		udelay(1000);
+		stop=get_timer(start);
+	}
+	rtc_get (&newtm);
+	if(tm.tm_sec==newtm.tm_sec) {
+		s=getenv("defaultdate");
+		if(!s)
+			mk_date ("010112001970", &newtm);
+		else
+			if(mk_date (s, &newtm)!=0) {
+				printf("RTC: Bad date format in defaultdate\n");
+				return 0;
+			}
+		rtc_reset ();
+		rtc_set(&newtm);
+	}
 	return 0;
 }

@@ -745,10 +780,10 @@ void print_mip405_info (void)
 	printf ("SER1 uses handshakes %s\n",
 			(ext & 0x80) ? "DTR/DSR" : "RTS/CTS");
 #else
-	printf ("User Config Switch %d %d %d %d %d %d %d %d %d\n",
+	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
 			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
 			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
-			(ext >> 6) & 0x1,(ext >> 7) & 0x1,(ext >> 8) & 0x1);
+			(ext >> 6) & 0x1,(ext >> 7) & 0x1);
 #endif
 	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
 	printf ("IRQs:\n");
--- a/board/mpl/mip405/mip405.h
+++ b/board/mpl/mip405/mip405.h
@@ -137,13 +137,13 @@ void user_led0(unsigned char on);
 					(FLASH_WBF << 12) + (FLASH_TH << 9) + (FLASH_RE << 8) + (FLASH_SOR << 7) + (FLASH_BEM << 6) + (FLASH_PEN << 5))

 /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
-#define FLASH_BS	2	/* 4 MByte */
+#define FLASH_BS	FLASH_SIZE_PRELIM	/* 4 MByte */
 /* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
 #define FLASH_BU	3	/* R/W */
 /* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
 #define FLASH_BW	1	/* 16Bit */
 /* CR register for Boot */
-#define FLASH_CR_B	((FLASH_BASE0_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
+#define FLASH_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))
 /* CR register for non Boot */
 #define FLASH_CR	((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (FLASH_BS << 17) + (FLASH_BU << 15) + (FLASH_BW << 13))

@@ -172,11 +172,12 @@ void user_led0(unsigned char on);

 /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
 #define MPS_BS		2	/* 4 MByte */
+#define MPS_BS_B		FLASH_SIZE_PRELIM	/* 1 MByte */
 /* Usage: 0=disabled, 1=Read only, 2=Write Only, 3=R/W */
 #define MPS_BU		3	/* R/W */
 /* Bus width: 0=8Bit, 1=16Bit, 2=32Bit, 3=Reserved */
 #define MPS_BW		0	/* 8Bit */
 /* CR register for Boot */
-#define MPS_CR_B	((FLASH_BASE0_PRELIM & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
+#define MPS_CR_B	((FLASH_BASE_PRELIM & 0xfff00000) + (MPS_BS_B << 17) + (MPS_BU << 15) + (MPS_BW << 13))
 /* CR register for non Boot */
 #define MPS_CR		((MULTI_PURPOSE_SOCKET_ADDR & 0xfff00000) + (MPS_BS << 17) + (MPS_BU << 15) + (MPS_BW << 13))
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
wdenk	34b3049a60	Code cleanup	2003-09-16 21:07:28 +00:00
wdenk	ef709e9230	* Disable MPC5200 bus pipelining as workaround for bus contention	2003-09-16 17:35:37 +00:00
wdenk	a57106fcb3	* Fix timeout problems with 1st packet on MPC5200	2003-09-16 17:29:31 +00:00
wdenk	373e6bec13	Disable MPC5200 bus pipelining as workaround for bus contention	2003-09-16 17:20:34 +00:00
wdenk	4aeb251f90	* Modify XLB arbiter priorities on MPC5200 so all devices use same priority; configure critical interrupts to be handled like external interrupts	2003-09-16 17:06:05 +00:00
wdenk	acf98e7f30	Make IPB clock on MGT5100/MPC5200 configurable in board config file; go back to 66 MHz for stability	2003-09-16 11:39:10 +00:00
wdenk	b56ddc636d	Cleanup of code, output formatting, and indentation.	2003-09-15 21:14:37 +00:00
wdenk	78137c3c93	* Patches by Jon Diekema, 15 Sep 2003: - add description for missing CFG_CMD_* entries in the README file - sacsng tweaks: include/configs/sacsng.h: + Support extra bootp options like: 2nd DNS and send hostname + Enabling ping and irq command + Adding defines for a bunch of misc configrabled options (patches for these options will be coming) + Adding watchdog support, but it isn't enabled yet. board/sacsng/sacsng.c: + Suppressing unneeded output when the quiet environment is non-zero. + show_boot_progress() now accepts any negative number as a failure code. + show_boot_progress() flashes the error code 5 times, and then resets the board to retry the boot from the top * Patch by Gleb Natapov, 14 Sep 2003: enable watchdog support for all MPC824x boards that have a watchdog	2003-09-15 18:00:00 +00:00
wdenk	35656de729	* Patch by Gleb Natapov, 14 Sep 2003: enable watchdog support for all MPC824x boards that have a watchdog * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the "Non-octet Aligned Frame" errors we see at 100 Mbps * Patch by Sharad Gupta, 14 Sep 2003: fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])	2003-09-14 19:08:39 +00:00
wdenk	200f8c7a4c	* Patch by llandre, 11 Sep 2003: update configuration for PPChameleonEVB board	2003-09-13 19:13:29 +00:00
wdenk	531716e171	* Patch by David M�ller, 13 Sep 2003: various changes to VCMA9 board specific files * Add I2C support for MGT5100 / MPC5200	2003-09-13 19:01:12 +00:00
wdenk	b70e7a00c8	* Patch by Rune Torgersen, 11 Sep 2003: Changed default memory option on MPC8266ADS to NOT be Page Based Interleave, since this doesn't work very well with the standard 16MB DIMM * Patch by George G. Davis, 12 Sep 2003: fix Makefile settings for sk98 driver	2003-09-12 20:09:09 +00:00
wdenk	f5300ab241	Move TRAB burn-in tests to TRAB board directory	2003-09-12 15:35:15 +00:00
stroese	68ce8957e5	Patch by Stefan Roese, 12 Sep 2003	2003-09-12 08:57:52 +00:00
stroese	72cd5aa703	New boards DP405, HUB405, PLU405, VOH405 added.	2003-09-12 08:57:15 +00:00
stroese	13fdf8a6ba	New board config file added.	2003-09-12 08:55:18 +00:00
stroese	2853d29b52	Update configuration.	2003-09-12 08:53:54 +00:00
stroese	428c563938	PPC405EP: set vendor id.	2003-09-12 08:52:09 +00:00
stroese	342f551bc9	Disable memory controller before setting first values.	2003-09-12 08:49:58 +00:00
stroese	ef9e86854e	PMC405 update.	2003-09-12 08:46:58 +00:00
stroese	09433a781b	PCI405 update.	2003-09-12 08:46:10 +00:00
stroese	1b554406cc	CPCI405(AB) update.	2003-09-12 08:44:46 +00:00
stroese	895af12a21	ASH405 update.	2003-09-12 08:43:46 +00:00
stroese	9a2dd74032	Xilinx jtag tool added.	2003-09-12 08:42:58 +00:00
stroese	22a40b0a88	Board VOH405 added.	2003-09-12 08:42:13 +00:00
stroese	b318262a71	Board PLU405 added.	2003-09-12 08:41:56 +00:00
stroese	a65cb68237	Board HUB405 added.	2003-09-12 08:41:39 +00:00
stroese	5ce08eea97	Board DP405 added.	2003-09-12 08:41:24 +00:00
wdenk	4f7cb08ee7	* Patch by Martin Krause, 11 Sep 2003: add burn-in tests for TRAB board * Enable instruction cache on MPC5200 board	2003-09-11 23:06:34 +00:00
wdenk	a43278a43d	* Patch by Gary Jennejohn, 11 Sep 2003: - allow for longer timeouts for USB mass storage devices * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. * Change output format for NAND flash - make it look like for other memory, too	2003-09-11 19:48:06 +00:00
wdenk	7205e4075d	* Patches by Denis Peter, 9 Sep 2003: add FAT support for IDE, SCSI and USB * Patches by Gleb Natapov, 2 Sep 2003: - cleanup of POST code for unsupported architectures - MPC824x locks way0 of data cache for use as initial RAM; this patch unlocks it after relocation to RAM and invalidates the locked entries. * Patch by Gleb Natapov, 30 Aug 2003: new I2C driver for mpc107 bridge. Now works from flash. * Patch by Dave Ellis, 11 Aug 2003: - JFFS2: fix typo in common/cmd_jffs2.c - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option - JFFS2: remove node version 0 warning - JFFS2: accept JFFS2 PADDING nodes - SXNI855T: add AM29LV800 support - SXNI855T: move environment from EEPROM to flash - SXNI855T: boot from JFFS2 in NOR or NAND flash * Patch by Bill Hargen, 11 Aug 2003: fixes for I2C on MPC8240 - fix i2c_write routine - fix iprobe command - eliminates use of global variables, plus dead code, cleanup.	2003-09-10 22:30:53 +00:00
wdenk	149dded2b1	* Add support for USB Mass Storage Devices (BBB) (tested with USB memory sticks only) * Avoid flicker on TRAB's VFD	2003-09-10 18:20:28 +00:00
wdenk	7152b1d0b3	* Add support for SK98xx driver * Add PCI support for SL8245 board * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) or 1 x AM29LV652 (two LV065 in one chip = 16 MB); Run IPB at 133 Mhz; adjust the MII clock frequency accordingly * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) to allow for more accurate baudrate settings (error now 0.7% at 115 kbps, instead of 3.5% before) * Patch by Andreas Mohr, 4 Sep 2003: Fix a lot of spelling errors	2003-09-05 23:19:14 +00:00
wdenk	4d816774f1	Adjustments / cleanup for PPChameleon EVB board	2003-09-03 14:03:26 +00:00
wdenk	093ae273da	Fix compile problem	2003-09-02 23:08:13 +00:00
wdenk	12f34241cb	* Add support for PPChameleon Eval Board * Add support for P3G4 board * Fix problem with MGT5100 FEC driver: add "early" MAC address initialization	2003-09-02 22:48:03 +00:00
wdenk	326428cc8b	Patch by Yuli Barcohen, 7 Aug 2003: According to the MPC8260 User's Manual, PCI_MODE signal should be reflected in SCCR register, and local bus pins configuration is taken from HRCW and appears in SIUMCR. For some reason it does not work this way, so the only possibility to detect if the board is configured in PCI mode is to check the BCSR. This patch sets SCCR and SIUMCR according to the BCSR.	2003-08-31 18:37:54 +00:00
wdenk	0cb61d7ddd	Patch by Raghu Krishnaprasad, 7 Aug 2003: add support for Adder II MPC852T module	2003-08-30 00:05:50 +00:00
wdenk	6f21347d49	* Patch by George G. Davis, 19 Aug 2003: fix TI Innovator/OMAP1510 pin configs * Patches by Kshitij, 18 Aug 2003 - add support for arm926ejs cpu core - add support for TI OMAP 1610 Innovator Board	2003-08-29 22:00:43 +00:00
wdenk	c29fdfc1d8	Patch by Yuli Barcohen, 14 Aug 2003: add support for bzip2 uncompression	2003-08-29 20:57:53 +00:00
wdenk	ca75added1	Add I2C and RTC support for RMU board using software I2C driver (because of better response to iprobe command); fix problem with "reset" command	2003-08-29 10:05:53 +00:00
stroese	437ce07b8a	Patch from Matthias Fuchs.	2003-08-28 14:24:37 +00:00
stroese	fe389a82c9	- Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to CONFIG_BOOTP_MASK.	2003-08-28 14:17:32 +00:00
wdenk	d94f92cbd7	* Fix ICU862 environment problem * Fix RAM size detection for RMU board * Implement "reset" for MGT5100/MPC5200 systems	2003-08-28 09:41:22 +00:00
wdenk	e0ac62d798	* Make Ethernet autonegotiation on INCA-IP work for all clock rates; allow selection of clock frequency as "make" target * Implement memory autosizing code for IceCube boards * Configure network port on INCA-IP for autonegotiation * Fix overflow problem in network timeout code * Patch by Richard Woodruff, 8 Aug 2003: Allow crc32 to be used at address 0x000 (crc32_no_comp, too).	2003-08-17 18:55:18 +00:00
wdenk	ae3af05ec9	Update for TQM board defaults: disable clocks_in_mhz, enable boot count limit	2003-08-07 22:18:11 +00:00
dzu	9374fa287b	Removed tools/gdb from "make all" target. Added make target "gdbtools" in toplevel directory instead. Removed astest.c from tools/gdb because it is no longer relevant.	2003-08-07 15:04:48 +00:00
wdenk	013dc8d9b9	Disable debug print for normal use. Fix MPC5200 FEC driver	2003-08-07 14:52:18 +00:00
dzu	d41e5e6994	Removed the file tools/gdb/astest.c	2003-08-07 14:22:10 +00:00
dzu	8f713fdfeb	Removed tools/gdb from "make all" target. Added make target "gdbtools" in toplevel directory instead. Removed astest.c from tools/gdb because it is no longer relevant.	2003-08-07 14:20:31 +00:00
wdenk	96e48cf6c1	* Fix PCI support for MPC5200 / IceCube Board	2003-08-05 18:22:44 +00:00
wdenk	bdccc4fedc	* Map ISP1362 USB OTG controller for NSCU board * Patch by Brad Parker, 02 Aug 2003: fix sc520_cdp problems * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements) * Allow erase command to cross flash bank boundaries	2003-08-05 17:43:17 +00:00
wdenk	96dd9af4c7	Must enable timebase earlier on MPC5200	2003-07-31 22:56:30 +00:00
wdenk	1f4bb37d6b	* Patch by Scott McNutt, 21 Jul 2003: Add support for LynuxWorks Kernel Downloadable Images (KDIs). Both LynxOS and BlueCat linux KDIs are supported. * Patch by Richard Woodruff, 25 Jul 2003: use more reliable reset for OMAP/925T * Patch by Nye Liu, 25 Jul 2003: fix typo in mpc8xx.h * Patch by Richard Woodruff, 24 Jul 2003: Fixes for cmd_nand.c: - Fixed null dereferece which could result in incorrect ECC values. - Added support for devices with no Ready/Busy signal hooked up. - Added OMAP1510 read/write protect handling. - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock for non-JFFS2. - Switched default ECC to be JFFS2.	2003-07-27 00:21:01 +00:00
wdenk	7784674852	* Allow crc32 to be used at address 0x000 * Provide consistent interface to standalone applications to access the 'global_data' structure Provide a doc/README.standalone more useful to users/developers. * Make IceCube MGT5100 FEC driver work	2003-07-26 08:08:08 +00:00
wdenk	27b207fd0a	* Implement new mechanism to export U-Boot's functions to standalone applications: instead of using (PPC-specific) system calls we now use a jump table; please see doc/README.standalone for details * Patch by Dave Westwood, 24 Jul 2003: added support for Unity OS (a proprietary OS)	2003-07-24 23:38:38 +00:00
wdenk	2535d60277	* Patch by Martin Krause, 17 Jul 2003: add delay to get I2C working with "imm" command and s3c24x0_i2c.c * Patch by Richard Woodruff, 17 July 03: - Fixed bug in OMAP1510 baud rate divisor settings. * Patch by Nye Liu, 16 July 2003: MPC860FADS fixes: - add MPC86xADS support (uses MPC86xADS.h) - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) o PLPRCR changes o BRG changes (EXTAL/XTAL restricted to 10MHz) o don't trust gclk() software measurement by default, depend on CONFIG_8xx_GCLK_FREQ - add DRAM SIMM not installed detection - use more "correct" SDRAM initialization sequence - allow different SDRAM sizes (8xxADS has 8M) - default DER is 0 - remove unused MAMR defines from FADS860T.h (all done in fads.c) - rename MAMR/MBMR defines to be more consistent. Should eventually be merged into MxMR to better reflect the PowerQUICC datasheet. * Patch by Yuli Barcohen, 16 Jul 2003: support new Motorola PQ2FADS-ZU evaluation board which replaced MPC8260ADS and MPC8266ADS	2003-07-17 23:16:40 +00:00
wdenk	945af8d723	* Add support for IceCube board (with MGT5100 and MPC5200 CPUs) * Add support for MGT5100 and MPC5200 processors	2003-07-16 21:53:01 +00:00
wdenk	cb4dbb7bbc	Incorporate Patch by Lutz Dennig, 15 Jul 2003.	2003-07-16 16:40:22 +00:00