Prepare 2009.03

Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>
Replaced endpoint numbers with appropriate macros in usbtty.c.
2026-06-02 17:56:44 +03:00 · 2009-03-21 22:04:41 +01:00 · 2009-03-21 10:40:24 +01:00 · 2009-03-20 22:37:38 +01:00 · 2009-03-20 22:16:36 +01:00 · 2009-03-20 12:58:31 +01:00
3648 changed files with 226658 additions and 99936 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -11,6 +11,7 @@
 *.a
 *.o
 *~
+*.swp
 *.patch

 #
@@ -46,9 +47,16 @@ patches-*
 patches
 series

+# gdb files
+.gdb_history
+
 # cscope files
 cscope.*

+# tags files
+/ctags
+/etags
+
 # OneNAND IPL files
 /onenand_ipl/onenand-ipl*
 /onenand_ipl/board/*/onenand*
--- a/18612
+++ b/18612
--- a/11
+++ b/11
@@ -217,6 +217,10 @@ H: Rich Ireland
 E: r.ireland@computer.org
 D: FPGA device configuration driver

+H: Mark Jackson
+E: mpfj@mimc.co.uk
+D: Port to MIMC200 board
+
 N: Gary Jennejohn
 E: garyj@jennejohn.org, gj@denx.de
 D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
@@ -399,6 +403,13 @@ N: Stelian Pop
 E: stelian.pop@leadtechdesign.com
 D: Atmel AT91CAP9ADK support

+N: Ricardo Ribalda Delgado
+E: ricardo.ribalda@uam.es
+D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
+D: Virtex ppc440 generic architecture
+D: Virtex ppc405 generic architecture
+W: http://www.ii.uam.es/~rribalda
+
 N: Stefan Roese
 E: sr@denx.de
 D: AMCC PPC4xx Support
--- a/115
+++ b/115
@@ -4,7 +4,7 @@
 #									#
 # For any board without permanent maintainer, please contact		#
 #	Wolfgang Denk <wd@denx.de>					#
-# and Cc: the <U-Boot-Users@lists.sourceforge.net> mailing lists.	#
+# and Cc: the <u-boot@lists.denx.de> mailing list.			#
 #									#
 # Note: lists sorted by Maintainer Name					#
 #########################################################################
@@ -130,6 +130,11 @@ Jon Diekema <jon.diekema@smiths-aerospace.com>

 	sbc8260		MPC8260

+Dirk Eibach <eibach@gdsys.de>
+
+	gdppc440etx	PPC440EP/GR
+	neo		PPC405EP
+
 Dave Ellis <DGE@sixnetio.com>

 	SXNI855T	MPC8xx
@@ -189,10 +194,6 @@ Wolfgang Grandegger <wg@denx.de>
 	IPHASE4539	MPC8260
 	SCM		MPC8260

-Howard Gray <mvsensor@matrix-vision.de>
-
-	MVS1		MPC823
-
 Joe Hamman <joe.hamman@embeddedspecialties.com>

 	sbc8548		MPC8548
@@ -263,6 +264,10 @@ Jon Loeliger <jdl@freescale.com>

 	MPC8641HPCN	MPC8641D

+Ron Madrid <info@sheldoninst.com>
+
+	SIMPC8313	MPC8313
+
 Dan Malek <dan@embeddedalley.com>

 	stxgp3		MPC85xx
@@ -315,6 +320,13 @@ Daniel Poirot <dan.poirot@windriver.com>
 	sbc8240		MPC8240
 	sbc405		PPC405GP

+Ricardo Ribalda <ricardo.ribalda@uam.es>
+
+	ml507 		PPC440x5
+	v5fx30teval	PPC440x5
+	xilinx-ppc405-generic	PPC405
+	xilinx-ppc440-generic	PPC440x5
+
 Stefan Roese <sr@denx.de>

 	P3M7448		MPC7448
@@ -359,12 +371,20 @@ Travis Sawyer (travis.sawyer@sandburst.com>
 	METROBOX	PPC440GX
 	XPEDITE1K	PPC440GX

+Georg Schardt <schardt@team-ctech.de>
+
+	fx12mm		PPC405
+
 Heiko Schocher <hs@denx.de>

 	ids8247		MPC8247
 	jupiter		MPC5200
+	kmeter1		MPC8360
+	kmsupx4		MPC852T
 	mgcoge		MPC8247
 	mgsuvd		MPC852
+	mucmc52		MPC5200
+	muas3001	MPC8270
 	municse		MPC5200
 	sc3		PPC405GP
 	uc101		MPC5200
@@ -398,6 +418,10 @@ Rune Torgersen <runet@innovsys.com>

 	MPC8266ADS	MPC8266

+Peter Tyser <ptyser@xes-inc.com>
+
+	XPEDITE5200	MPC8548
+	XPEDITE5370	MPC8572

 David Updegraff <dave@cray.com>

@@ -424,6 +448,9 @@ John Zhan <zhanz@sinovee.com>

 	svm_sc8xx	MPC8xx

+Feng Kan <fkan@amcc.com>
+
+	redwood			PPC4xx
 -------------------------------------------------------------------------

 Unknown / orphaned boards:
@@ -461,6 +488,10 @@ Rowel Atienza <rowel@diwalabs.com>

 	armadillo	ARM720T

+Dirk Behme <dirk.behme@gmail.com>
+
+	omap3_beagle	ARM CORTEX-A8 (OMAP3530 SoC)
+
 Rishi Bhattacharya <rishi@ti.com>

 	omap5912osk	ARM926EJS
@@ -496,6 +527,15 @@ Kshitij Gupta <kshitij@ti.com>
 	omap1510inn	ARM925T
 	omap1610inn	ARM926EJS

+Sascha Hauer <s.hauer@pengutronix.de>
+
+	imx31_litekit	i.MX31
+	imx31_phycore	i.MX31
+
+Grazvydas Ignotas <notasas@gmail.com>
+
+	omap3_pandora	ARM CORTEX-A8 (OMAP3xx SoC)
+
 Gary Jennejohn <gj@denx.de>

 	smdk2400	ARM920T
@@ -518,6 +558,15 @@ Prakash Kumar <prakash@embedx.com>

 	cerf250		xscale

+Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+	mx31ads		i.MX31
+	SMDK6400	S3C6400
+
+Nishanth Menon <nm@ti.com>
+
+	omap3_zoom1	ARM CORTEX-A8 (OMAP3xx SoC)
+
 David Müller <d.mueller@elsoft.ch>

 	smdk2410	ARM920T
@@ -541,6 +590,10 @@ Dave Peverley <dpeverley@mpc-data.co.uk>

 	omap730p2	ARM926EJS

+Manikandan Pillai <mani.pillai@ti.com>
+
+	omap3_evm	ARM CORTEX-A8 (OMAP3xx SoC)
+
 Stelian Pop <stelian.pop@leadtechdesign.com>

 	at91cap9adk	ARM926EJS (AT91CAP9 SoC)
@@ -555,6 +608,15 @@ Stefan Roese <sr@denx.de>
 	pdnb3		xscale
 	scpu		xscale

+Alessandro Rubini <rubini@unipv.it>
+Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
+
+	nmdk8815	ARM926EJS (Nomadik 8815 Soc)
+
+Steve Sakoman <sakoman@gmail.com>
+
+	omap3_overo	ARM CORTEX-A8 (OMAP3xx SoC)
+
 Robert Schwebel <r.schwebel@pengutronix.de>

 	csb226		xscale
@@ -577,6 +639,10 @@ Greg Ungerer <greg.ungerer@opengear.com>
 	cm4116		ks8695p
 	cm4148		ks8695p

+Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
+
+	SFFSDR		ARM926EJS
+
 Richard Woodruff <r-woodruff2@ti.com>

 	omap2420h4	ARM1136EJS
@@ -586,6 +652,13 @@ Alex Z
 	lart		SA1100
 	dnp1110		SA1110

+Sergey Lapin <slapin@ossfans.org>
+
+	afeb9260	ARM926EJS (AT91SAM9260 SoC)
+
+Wolfgang Denk <wd@denx.de>
+	qong		i.MX31
+
 -------------------------------------------------------------------------

 Unknown / orphaned boards:
@@ -625,6 +698,10 @@ Thomas Lange <thomas@corelatus.se>
 Vlad Lungu <vlad.lungu@windriver.com>
 	qemu_mips	MIPS32

+Stefan Roese <sr@denx.de>
+
+	vct_xxx		MIPS32 4Kc
+
 #########################################################################
 # Nios-32 Systems:							#
 #									#
@@ -669,8 +746,7 @@ Yasushi Shoji <yashi@atmark-techno.com>

 Michal Simek <monstr@monstr.eu>

-	ML401		MicroBlaze
-	XUPV2P		MicroBlaze
+	microblaze-generic	MicroBlaze

 #########################################################################
 # Coldfire Systems:							#
@@ -691,6 +767,8 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>

 	M52277EVB	mcf5227x
 	M5235EVB	mcf52x2
+	M5253DEMO	mcf52x2
+	M53017EVB	mcf532x
 	M5329EVB	mcf532x
 	M5373EVB	mcf532x
 	M54455EVB	mcf5445x
@@ -704,7 +782,20 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 #	Board		CPU						#
 #########################################################################

-Haavard Skinnemoen <hskinnemoen@atmel.com>
+Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+
+	FAVR-32-EZKIT		AT32AP7000
+
+Mark Jackson <mpfj@mimc.co.uk>
+
+	MIMC200			AT32AP7000
+
+Alex Raimondi <alex.raimondi@miromico.ch>
+Julien May <julien.may@miromico.ch>
+
+	HAMMERHEAD		AT32AP7000
+
+Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

 	ATSTK1000	AT32AP7xxx
 	ATSTK1002	AT32AP7000
@@ -725,12 +816,15 @@ Yusuke Goda <goda.yusuke@renesas.com>
 	MIGO-R		SH7722

 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+		  <iwamatsu.nobuhiro@renesas.com>

 	MS7750SE	SH7750
 	MS7722SE	SH7722
 	R7780MP		SH7780
 	R2DPlus		SH7751R
 	SH7763RDP	SH7763
+	RSK7203		SH7203
+	AP325RXA	SH7723

 Mark Jonas <mark.jonas@de.bosch.com>

@@ -739,6 +833,11 @@ Mark Jonas <mark.jonas@de.bosch.com>
 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>

 	MS7720SE	SH7720
+	R0P77850011RL	SH7785
+
+Yusuke Goda <goda.yusuke@renesas.com>
+
+	MIGO-R		SH7722

 #########################################################################
 # Blackfin Systems:							#
--- a/105
+++ b/105
@@ -1,6 +1,15 @@
 #!/bin/sh

-: ${JOBS:=}
+# Determine number of CPU cores if no default was set
+: ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
+
+if [ "$BUILD_NCPUS" -gt 1 ]
+then
+	JOBS=-j`expr "$BUILD_NCPUS" + 1`
+else
+	JOBS=""
+fi
+

 if [ "${CROSS_COMPILE}" ] ; then
 	MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
@@ -108,13 +117,13 @@ LIST_8xx="		\
 	KUP4X		\
 	LANTEC		\
 	lwmon		\
+	kmsupx4		\
 	MBX		\
 	MBX860T		\
 	mgsuvd		\
 	MHPC		\
 	MPC86xADS	\
 	MPC885ADS	\
-	MVS1		\
 	NETPHONE	\
 	NETTA		\
 	NETTA2		\
@@ -162,6 +171,7 @@ LIST_4xx="		\
 	alpr		\
 	AP1000		\
 	AR405		\
+	arches		\
 	ASH405		\
 	bamboo		\
 	bamboo_nand	\
@@ -186,7 +196,9 @@ LIST_4xx="		\
 	ebony		\
 	ERIC		\
 	EXBITGEN	\
+	fx12mm		\
 	G2000		\
+	gdppc440etx	\
 	glacier		\
 	haleakala	\
 	haleakala_nand	\
@@ -209,6 +221,9 @@ LIST_4xx="		\
 	MIP405T		\
 	ML2		\
 	ml300		\
+	ml507		\
+	ml507_flash	\
+	neo		\
 	ocotea		\
 	OCRTC		\
 	ORSG		\
@@ -222,18 +237,23 @@ LIST_4xx="		\
 	PPChameleonEVB	\
 	quad100hd	\
 	rainier		\
+	redwood		\
 	sbc405		\
 	sc3		\
 	sequoia		\
 	sequoia_nand	\
 	taihu		\
 	taishan		\
+	v5fx30teval	\
+	v5fx30teval_flash \
 	VOH405		\
 	VOM405		\
 	W7OLMC		\
 	W7OLMG		\
 	walnut		\
 	WUH405		\
+	xilinx-ppc440-generic \
+	xilinx-ppc440-generic_flash \
 	XPEDITE1K	\
 	yellowstone	\
 	yosemite	\
@@ -317,8 +337,9 @@ LIST_8260="		\
 #########################################################################

 LIST_83xx="		\
+	kmeter1		\
 	MPC8313ERDB_33	\
-	MPC8313ERDB_66	\
+	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
@@ -334,6 +355,7 @@ LIST_83xx="		\
 	MPC837XERDB	\
 	MVBLM7		\
 	sbc8349		\
+	SIMPC8313_LP	\
 	TQM834x		\
 "

@@ -344,6 +366,7 @@ LIST_83xx="		\

 LIST_85xx="		\
 	ATUM8548	\
+	MPC8536DS	\
 	MPC8540ADS	\
 	MPC8540EVAL	\
 	MPC8541CDS	\
@@ -352,6 +375,8 @@ LIST_85xx="		\
 	MPC8555CDS	\
 	MPC8560ADS	\
 	MPC8568MDS	\
+	MPC8572DS	\
+	MPC8572DS_36BIT	\
 	PM854		\
 	PM856		\
 	sbc8540		\
@@ -363,8 +388,12 @@ LIST_85xx="		\
 	TQM8540		\
 	TQM8541		\
 	TQM8548		\
+	TQM8548_AG	\
+	TQM8548_BE	\
 	TQM8555		\
 	TQM8560		\
+	XPEDITE5200	\
+	XPEDITE5370	\
 "

 #########################################################################
@@ -476,6 +505,7 @@ LIST_ARM9="			\
 	mx1ads			\
 	mx1fs2			\
 	netstar			\
+	nmdk8815		\
 	omap1510inn		\
 	omap1610h2		\
 	omap1610inn		\
@@ -515,6 +545,19 @@ LIST_ARM11="		\
 	imx31_litekit	\
 	imx31_phycore	\
 	mx31ads		\
+	qong		\
+	smdk6400	\
+"
+
+#########################################################################
+## ARM Cortex-A8 Systems
+#########################################################################
+LIST_ARM_CORTEX_A8="		\
+	omap3_beagle		\
+	omap3_overo		\
+	omap3_evm		\
+	omap3_pandora		\
+	omap3_zoom1		\
 "

 #########################################################################
@@ -522,6 +565,7 @@ LIST_ARM11="		\
 #########################################################################

 LIST_at91="		\
+	afeb9260	\
 	at91cap9adk	\
 	at91rm9200dk	\
 	at91sam9260ek	\
@@ -570,15 +614,16 @@ LIST_ixp="		\
 ## ARM groups
 #########################################################################

-LIST_arm="		\
-	${LIST_SA}	\
-	${LIST_ARM7}	\
-	${LIST_ARM9}	\
-	${LIST_ARM10}	\
-	${LIST_ARM11}	\
-	${LIST_at91}	\
-	${LIST_pxa}	\
-	${LIST_ixp}	\
+LIST_arm="			\
+	${LIST_SA}		\
+	${LIST_ARM7}		\
+	${LIST_ARM9}		\
+	${LIST_ARM10}		\
+	${LIST_ARM11}		\
+	${LIST_ARM_CORTEX_A8}	\
+	${LIST_at91}		\
+	${LIST_pxa}		\
+	${LIST_ixp}		\
 "

 #########################################################################
@@ -588,6 +633,18 @@ LIST_arm="		\
 LIST_mips4kc="		\
 	incaip		\
 	qemu_mips	\
+	vct_platinum	\
+	vct_platinum_small	\
+	vct_platinum_onenand	\
+	vct_platinum_onenand_small	\
+	vct_platinumavc	\
+	vct_platinumavc_small	\
+	vct_platinumavc_onenand	\
+	vct_platinumavc_onenand_small	\
+	vct_premium	\
+	vct_premium_small	\
+	vct_premium_onenand	\
+	vct_premium_onenand_small	\
 "

 LIST_mips5kc="		\
@@ -634,6 +691,7 @@ LIST_mips_el="			\

 LIST_I486="		\
 	sc520_cdp	\
+	sc520_eNET	\
 	sc520_spunk	\
 	sc520_spunk_rel	\
 "
@@ -673,10 +731,9 @@ LIST_nios2="		\
 ## MicroBlaze Systems
 #########################################################################

-LIST_microblaze="	\
-	ml401		\
-	suzaku		\
-	xupv2p		\
+LIST_microblaze="			\
+	microblaze-generic		\
+	suzaku				\
 "

 #########################################################################
@@ -691,13 +748,16 @@ LIST_coldfire="			\
 	M52277EVB		\
 	M5235EVB		\
 	M5249EVB		\
+	M5253DEMO		\
 	M5253EVBE		\
 	M5271EVB		\
 	M5272C3			\
 	M5275EVB		\
 	M5282EVB		\
+	M53017EVB		\
 	M5329AFEE		\
 	M5373EVB		\
+	M54451EVB		\
 	M54455EVB		\
 	M5475AFE		\
 	M5485AFE		\
@@ -714,6 +774,9 @@ LIST_avr32="		\
 	atstk1004	\
 	atstk1006	\
 	atngw100	\
+	favr-32-ezkit	\
+	hammerhead	\
+	mimc200		\
 "

 #########################################################################
@@ -731,6 +794,9 @@ LIST_blackfin="		\
 ## SH Systems
 #########################################################################

+LIST_sh2="		\
+	rsk7203		\
+"
 LIST_sh3="		\
 	mpr2		\
 	ms7720se	\
@@ -743,9 +809,12 @@ LIST_sh4="		\
 	r7780mp		\
 	r2dplus		\
 	sh7763rdp	\
+	sh7785lcr	\
+	ap325rxa	\
 "

 LIST_sh="		\
+	${LIST_sh2}	\
 	${LIST_sh3}	\
 	${LIST_sh4}	\
 "
@@ -782,7 +851,7 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	arm|SA|ARM7|ARM9|ARM10|ARM11|at91|ixp|pxa \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|ARM_CORTEX_A8|at91|ixp|pxa \
 	|avr32 \
 	|blackfin \
 	|coldfire \
@@ -790,7 +859,7 @@ do
 	|mips|mips_el \
 	|nios|nios2 \
 	|ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
-	|sh|sh3|sh4 \
+	|sh|sh2|sh3|sh4 \
 	|sparc \
 	|x86|I486 \
 	)
--- a/671
+++ b/671
--- a/598
+++ b/598
--- a/api/api.c
+++ b/api/api.c
@@ -534,7 +534,7 @@ static int API_env_enum(va_list ap)

 		for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
 			for (n = i; env_get_char(n) != '\0'; ++n) {
-				if (n >= CFG_ENV_SIZE) {
+				if (n >= CONFIG_ENV_SIZE) {
 					/* XXX shouldn't we set *next = NULL?? */
 					return 0;
 				}
--- a/api/api_platform-ppc.c
+++ b/api/api_platform-ppc.c
@@ -66,7 +66,7 @@ int platform_sys_info(struct sys_info *si)
 	si->bar = gd->bd->bi_bar;
 #undef bi_bar
 #else
-	si->bar = NULL;
+	si->bar = 0;
 #endif

 	platform_set_mr(si, gd->bd->bi_memstart, gd->bd->bi_memsize, MR_ATTR_DRAM);
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -30,6 +30,10 @@
 #include <common.h>
 #include <api_public.h>

+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+#include <usb.h>
+#endif
+
 #define DEBUG
 #undef DEBUG

@@ -63,28 +67,28 @@ static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, };
 void dev_stor_init(void)
 {
 #if defined(CONFIG_CMD_IDE)
-	specs[ENUM_IDE].max_dev = CFG_IDE_MAXDEVICE;
+	specs[ENUM_IDE].max_dev = CONFIG_SYS_IDE_MAXDEVICE;
 	specs[ENUM_IDE].enum_started = 0;
 	specs[ENUM_IDE].enum_ended = 0;
 	specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
 	specs[ENUM_IDE].name = "ide";
 #endif
 #if defined(CONFIG_CMD_MMC)
-	specs[ENUM_MMC].max_dev = CFG_MMC_MAX_DEVICE;
+	specs[ENUM_MMC].max_dev = CONFIG_SYS_MMC_MAX_DEVICE;
 	specs[ENUM_MMC].enum_started = 0;
 	specs[ENUM_MMC].enum_ended = 0;
 	specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC;
 	specs[ENUM_MMC].name = "mmc";
 #endif
 #if defined(CONFIG_CMD_SATA)
-	specs[ENUM_SATA].max_dev = CFG_SATA_MAX_DEVICE;
+	specs[ENUM_SATA].max_dev = CONFIG_SYS_SATA_MAX_DEVICE;
 	specs[ENUM_SATA].enum_started = 0;
 	specs[ENUM_SATA].enum_ended = 0;
 	specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
 	specs[ENUM_SATA].name = "sata";
 #endif
 #if defined(CONFIG_CMD_SCSI)
-	specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
+	specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
 	specs[ENUM_SCSI].enum_started = 0;
 	specs[ENUM_SCSI].enum_ended = 0;
 	specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
--- a/api_examples/.gitignore
+++ b/api_examples/.gitignore
@@ -0,0 +1,7 @@
+crc32.c
+ctype.c
+demo
+demo.bin
+ppcstring.S
+string.c
+vsprintf.c
--- a/api_examples/Makefile
+++ b/api_examples/Makefile
@@ -23,10 +23,9 @@
 ifeq ($(ARCH),ppc)
 LOAD_ADDR = 0x40000
 endif
-
-#ifeq ($(ARCH),arm)
-#LOAD_ADDR = 0xc100000
-#endif
+ifeq ($(ARCH),arm)
+LOAD_ADDR = 0x1000000
+endif

 include $(TOPDIR)/config.mk

--- a/api_examples/crt0.S
+++ b/api_examples/crt0.S
@@ -26,9 +26,11 @@
 #if defined(CONFIG_PPC)

 	.text
-
 	.globl _start
 _start:
+	lis	%r11, search_hint@ha
+	addi	%r11, %r11, search_hint@l
+	stw	%r1, 0(%r11)
 	b	main


@@ -40,11 +42,30 @@ syscall:
 	mtctr	%r11
 	bctr

+#elif defined(CONFIG_ARM)
+
+	.text
+	.globl _start
+_start:
+	ldr	ip, =search_hint
+	str	sp, [ip]
+	b	main
+
+
+	.globl syscall
+syscall:
+	ldr	ip, =syscall_ptr
+	ldr	pc, [ip]
+
+#else
+#error No support for this arch!
+#endif

 	.globl syscall_ptr
 syscall_ptr:
 	.align	4
 	.long	0
-#else
-#error No support for this arch!
-#endif
+
+	.globl search_hint
+search_hint:
+	.long   0
--- a/api_examples/demo.c
+++ b/api_examples/demo.c
@@ -43,12 +43,11 @@ static char buf[BUF_SZ];

 int main(int argc, char *argv[])
 {
-	int rv = 0;
-	int h, i, j;
-	int devs_no;
+	int rv = 0, h, i, j, devs_no;
 	struct api_signature *sig = NULL;
 	ulong start, now;
 	struct device_info *di;
+	lbasize_t rlen;

 	if (!api_search_sig(&sig))
 		return -1;
@@ -96,7 +95,6 @@ int main(int argc, char *argv[])
 	if (devs_no == 0)
 		return -1;

-
 	printf("\n*** Show devices ***\n");
 	for (i = 0; i < devs_no; i++) {
 		test_dump_di(i);
@@ -133,11 +131,12 @@ int main(int argc, char *argv[])
 		if ((rv = ub_dev_open(i)) != 0)
 			errf("open device %d error %d\n", i, rv);

-		else if ((rv = ub_dev_read(i, buf, 1, 0)) != 0)
+		else if ((rv = ub_dev_read(i, buf, 1, 0, &rlen)) != 0)
 			errf("could not read from device %d, error %d\n", i, rv);
-
-		printf("Sector 0 dump (512B):\n");
-		test_dump_buf(buf, 512);
+		else {
+			printf("Sector 0 dump (512B):\n");
+			test_dump_buf(buf, 512);
+		}

 		ub_dev_close(i);
 	}
@@ -178,6 +177,7 @@ int main(int argc, char *argv[])
 		printf("%s = %s\n", env, ub_env_get(env));

 	/* reset */
+	printf("\n*** Resetting board ***\n");
 	ub_reset();
 	printf("\nHmm, reset returned...?!\n");

--- a/api_examples/glue.c
+++ b/api_examples/glue.c
@@ -1,7 +1,5 @@
 /*
- * (C) Copyright 2007 Semihalf
- *
- * Written by: Rafal Jaworowski <raj@semihalf.com>
+ * (C) Copyright 2007-2008 Semihalf, Rafal Jaworowski <raj@semihalf.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
@@ -57,16 +55,23 @@ static int valid_sig(struct api_signature *sig)
 *
 * returns 1/0 depending on found/not found result
 */
-int api_search_sig(struct api_signature **sig) {
-
+int api_search_sig(struct api_signature **sig)
+{
 	unsigned char *sp;
+	uint32_t search_start = 0;
+	uint32_t search_end = 0;

 	if (sig == NULL)
 		return 0;

-	sp = (unsigned char *)API_SEARCH_START;
+	if (search_hint == 0)
+		search_hint = 255 * 1024 * 1024;

-	while ((sp + (int)API_SIG_MAGLEN) < (unsigned char *)API_SEARCH_END) {
+	search_start = search_hint & ~0x000fffff;
+	search_end = search_start + API_SEARCH_LEN - API_SIG_MAGLEN;
+
+	sp = (unsigned char *)search_start;
+	while ((sp + API_SIG_MAGLEN) < (unsigned char *)search_end) {
 		if (!memcmp(sp, API_SIG_MAGIC, API_SIG_MAGLEN)) {
 			*sig = (struct api_signature *)sp;
 			if (valid_sig(*sig))
@@ -126,8 +131,7 @@ void ub_reset(void)
 	syscall(API_RESET, NULL);
 }

-#define MR_MAX 5
-static struct mem_region mr[MR_MAX];
+static struct mem_region mr[UB_MAX_MR];
 static struct sys_info si;

 struct sys_info * ub_get_sys_info(void)
@@ -136,7 +140,7 @@ struct sys_info * ub_get_sys_info(void)

 	memset(&si, 0, sizeof(struct sys_info));
 	si.mr = mr;
-	si.mr_no = MR_MAX;
+	si.mr_no = UB_MAX_MR;
 	memset(&mr, 0, sizeof(mr));

 	if (!syscall(API_GET_SYS_INFO, &err, (u_int32_t)&si))
@@ -171,17 +175,15 @@ unsigned long ub_get_timer(unsigned long base)
 *
 * devices
 *
- * Devices are identified by handles: numbers 0, 1, 2, ..., MAX_DEVS-1
+ * Devices are identified by handles: numbers 0, 1, 2, ..., UB_MAX_DEV-1
 *
 ***************************************************************************/

-#define MAX_DEVS 6
-
-static struct device_info devices[MAX_DEVS];
+static struct device_info devices[UB_MAX_DEV];

 struct device_info * ub_dev_get(int i)
 {
-	return ((i < 0 || i >= MAX_DEVS) ? NULL : &devices[i]);
+	return ((i < 0 || i >= UB_MAX_DEV) ? NULL : &devices[i]);
 }

 /*
@@ -195,7 +197,7 @@ int ub_dev_enum(void)
 	struct device_info *di;
 	int n = 0;

-	memset(&devices, 0, sizeof(struct device_info) * MAX_DEVS);
+	memset(&devices, 0, sizeof(struct device_info) * UB_MAX_DEV);
 	di = &devices[0];

 	if (!syscall(API_DEV_ENUM, NULL, di))
@@ -203,7 +205,7 @@ int ub_dev_enum(void)

 	while (di->cookie != NULL) {

-		if (++n >= MAX_DEVS)
+		if (++n >= UB_MAX_DEV)
 			break;

 		/* take another device_info */
@@ -229,7 +231,7 @@ int ub_dev_open(int handle)
 	struct device_info *di;
 	int err = 0;

-	if (handle < 0 || handle >= MAX_DEVS)
+	if (handle < 0 || handle >= UB_MAX_DEV)
 		return API_EINVAL;

 	di = &devices[handle];
@@ -244,7 +246,7 @@ int ub_dev_close(int handle)
 {
 	struct device_info *di;

-	if (handle < 0 || handle >= MAX_DEVS)
+	if (handle < 0 || handle >= UB_MAX_DEV)
 		return API_EINVAL;

 	di = &devices[handle];
@@ -265,7 +267,7 @@ int ub_dev_close(int handle)
 */
 static int dev_valid(int handle)
 {
-	if (handle < 0 || handle >= MAX_DEVS)
+	if (handle < 0 || handle >= UB_MAX_DEV)
 		return 0;

 	if (devices[handle].state != DEV_STA_OPEN)
@@ -285,7 +287,8 @@ static int dev_stor_valid(int handle)
 	return 1;
 }

-int ub_dev_read(int handle, void *buf, lbasize_t len, lbastart_t start)
+int ub_dev_read(int handle, void *buf, lbasize_t len, lbastart_t start,
+		lbasize_t *rlen)
 {
 	struct device_info *di;
 	lbasize_t act_len;
@@ -296,15 +299,12 @@ int ub_dev_read(int handle, void *buf, lbasize_t len, lbastart_t start)

 	di = &devices[handle];
 	if (!syscall(API_DEV_READ, &err, di, buf, &len, &start, &act_len))
-		return -1;
+		return API_ESYSC;

-	if (err)
-		return err;
+	if (!err && rlen)
+		*rlen = act_len;

-	if (act_len != len)
-		return API_EIO;
-
-	return 0;
+	return err;
 }

 static int dev_net_valid(int handle)
@@ -318,7 +318,7 @@ static int dev_net_valid(int handle)
 	return 1;
 }

-int ub_dev_recv(int handle, void *buf, int len)
+int ub_dev_recv(int handle, void *buf, int len, int *rlen)
 {
 	struct device_info *di;
 	int err = 0, act_len;
@@ -328,12 +328,12 @@ int ub_dev_recv(int handle, void *buf, int len)

 	di = &devices[handle];
 	if (!syscall(API_DEV_READ, &err, di, buf, &len, &act_len))
-		return -1;
+		return API_ESYSC;

-	if (err)
-		return -1;
+	if (!err && rlen)
+		*rlen = act_len;

-	return act_len;
+	 return (err);
 }

 int ub_dev_send(int handle, void *buf, int len)
@@ -346,7 +346,7 @@ int ub_dev_send(int handle, void *buf, int len)

 	di = &devices[handle];
 	if (!syscall(API_DEV_WRITE, &err, di, buf, &len))
-		return -1;
+		return API_ESYSC;

 	return err;
 }
@@ -372,7 +372,6 @@ void ub_env_set(const char *name, char *value)
 	syscall(API_ENV_SET, NULL, (uint32_t)name, (uint32_t)value);
 }

-
 static char env_name[256];

 const char * ub_env_enum(const char *last)
--- a/api_examples/glue.h
+++ b/api_examples/glue.h
@@ -30,18 +30,22 @@
 #ifndef _API_GLUE_H_
 #define _API_GLUE_H_

-#define API_SEARCH_START	(255 * 1024 * 1024)	/* start at 1MB below top RAM */
-#define API_SEARCH_END		(256 * 1024 * 1024 - 1)	/* ...and search to the end */
+#define API_SEARCH_LEN		(3 * 1024 * 1024)	/* 3MB search range */
+
+#define UB_MAX_MR	5	/* max mem regions number */
+#define UB_MAX_DEV	6	/* max devices number */
+
+extern void *syscall_ptr;
+extern uint32_t search_hint;

 int	syscall(int, int *, ...);
-void *	syscall_ptr;
-
 int	api_search_sig(struct api_signature **sig);

 /*
- * ub_ library calls are part of the application, not U-Boot code!  They are
- * front-end wrappers that are used by the consumer application: they prepare
- * arguments for particular syscall and jump to the low level syscall()
+ * The ub_ library calls are part of the application, not U-Boot code!  They
+ * are front-end wrappers that are used by the consumer application: they
+ * prepare arguments for particular syscall and jump to the low level
+ * syscall()
 */

 /* console */
@@ -67,10 +71,10 @@ const char *	ub_env_enum(const char *last);
 int			ub_dev_enum(void);
 int			ub_dev_open(int handle);
 int			ub_dev_close(int handle);
-int			ub_dev_read(int handle, void *buf,
-				lbasize_t len, lbastart_t start);
+int			ub_dev_read(int handle, void *buf, lbasize_t len,
+				lbastart_t start, lbasize_t *rlen);
 int			ub_dev_send(int handle, void *buf, int len);
-int			ub_dev_recv(int handle, void *buf, int len);
+int			ub_dev_recv(int handle, void *buf, int len, int *rlen);
 struct device_info *	ub_dev_get(int);

 #endif /* _API_GLUE_H_ */
--- a/blackfin_config.mk
+++ b/blackfin_config.mk
@@ -24,16 +24,23 @@
 CONFIG_BFIN_CPU := $(strip $(subst ",,$(CONFIG_BFIN_CPU)))
 CONFIG_BFIN_BOOT_MODE := $(strip $(subst ",,$(CONFIG_BFIN_BOOT_MODE)))

-PLATFORM_RELFLAGS += -ffixed-P5
+PLATFORM_RELFLAGS += -ffixed-P5 -fomit-frame-pointer -mno-fdpic
 PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN

+LDFLAGS += --gc-sections
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+
 ifneq (,$(CONFIG_BFIN_CPU))
 PLATFORM_RELFLAGS += -mcpu=$(CONFIG_BFIN_CPU)
 endif

 SYM_PREFIX = _

+LDR_FLAGS += --bmode $(subst BFIN_BOOT_,,$(CONFIG_BFIN_BOOT_MODE))
 LDR_FLAGS += --use-vmas
+ifneq ($(CONFIG_BFIN_BOOT_MODE),BFIN_BOOT_BYPASS)
+LDR_FLAGS += --initcode $(obj)cpu/$(CPU)/initcode.o
+endif
 ifneq (,$(findstring s,$(MAKEFLAGS)))
 LDR_FLAGS += --quiet
 endif
--- a/board/AtmarkTechno/suzaku/flash.c
+++ b/board/AtmarkTechno/suzaku/flash.c
@@ -24,7 +24,7 @@

 #include <common.h>

-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

 unsigned long flash_init(void)
 {
--- a/board/AtmarkTechno/suzaku/u-boot.lds
+++ b/board/AtmarkTechno/suzaku/u-boot.lds
@@ -61,6 +61,7 @@ SECTIONS
 	{
 		__bss_start = .;
 		*(.bss)
+		. = ALIGN(4);
 		__bss_end = .;
 	}
 	__end = . ;
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -32,7 +32,7 @@
 int checkboard (void)
 {
 	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
-#if (TEXT_BASE ==  CFG_INT_FLASH_BASE)
+#if (TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
 	puts ("       Boot from Internal FLASH\n");
 #endif

@@ -45,10 +45,10 @@ phys_size_t initdram (int board_type)

 	size = 0;
 	MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
-			| MCFSDRAMC_DCR_RC ((15 * CFG_CLK) >> 4);
-#ifdef CFG_SDRAM_BASE0
+			| MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+#ifdef CONFIG_SYS_SDRAM_BASE0

-	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE0)
+	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
 			| MCFSDRAMC_DACR_CASL (1)
 			| MCFSDRAMC_DACR_CBM (3)
 			| MCFSDRAMC_DACR_PS_16;
@@ -57,17 +57,17 @@ phys_size_t initdram (int board_type)

 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;

-	*(unsigned short *) (CFG_SDRAM_BASE0) = 0xA5A5;
+	*(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
 	for (i = 0; i < 2000; i++)
 		asm (" nop");
 	mbar_writeLong (MCFSDRAMC_DACR0,
 			mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
-	*(unsigned int *) (CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
-	size += CFG_SDRAM_SIZE * 1024 * 1024;
+	*(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
+	size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 #endif
-#ifdef CFG_SDRAM_BASE1
-	MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CFG_SDRAM_BASE1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
 			| MCFSDRAMC_DACR_CASL (1)
 			| MCFSDRAMC_DACR_CBM (3)
 			| MCFSDRAMC_DACR_PS_16;
@@ -76,25 +76,25 @@ phys_size_t initdram (int board_type)

 	MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IP;

-	*(unsigned short *) (CFG_SDRAM_BASE1) = 0xA5A5;
+	*(unsigned short *) (CONFIG_SYS_SDRAM_BASE1) = 0xA5A5;
 	MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_RE;

 	for (i = 0; i < 2000; i++)
 		asm (" nop");

 	MCFSDRAMC_DACR1 |= MCFSDRAMC_DACR_IMRS;
-	*(unsigned int *) (CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
-	size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+	*(unsigned int *) (CONFIG_SYS_SDRAM_BASE1 + 0x220) = 0xA5A5;
+	size += CONFIG_SYS_SDRAM_SIZE1 * 1024 * 1024;
 #endif
 	return size;
 }


-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
 int testdram (void)
 {
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
 	uint *p;

 	printf("SDRAM test phase 1:\n");
@@ -144,7 +144,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		rcode = 0;
 		break;
 	default:
-		printf ("Usage:\n%s\n", cmdtp->usage);
+		cmd_usage(cmdtp);
 		rcode = 1;
 		break;
 	}
@@ -155,7 +155,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

 U_BOOT_CMD(
 	vcimage,	2,	0,	do_vcimage,
-	"vcimage - loads an image to Display\n",
+	"loads an image to Display",
 	"vcimage addr\n"
 );

--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk

 LIB	= $(obj)lib$(BOARD).a

-COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o
+COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o

 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
--- a/board/BuS/EB+MCF-EV123/VCxK.c
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -25,7 +25,7 @@
 #include <asm/m5282.h>
 #include "VCxK.h"

-vu_char *vcxk_bws = (vu_char *)(CFG_CS3_BASE);
+vu_char *vcxk_bws = (vu_char *)(CONFIG_SYS_CS3_BASE);
 #define VCXK_BWS vcxk_bws

 static ulong vcxk_driver;
--- a/board/BuS/EB+MCF-EV123/cfm_flash.c
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -28,14 +28,14 @@

 #if defined(CONFIG_M5281) || defined(CONFIG_M5282)

-#if (CFG_CLK>20000000)
-	#define CFM_CLK  (((long) CFG_CLK / (400000 * 8) + 1) | 0x40)
+#if (CONFIG_SYS_CLK>20000000)
+	#define CFM_CLK  (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
 #else
-	#define CFM_CLK  ((long) CFG_CLK / 400000 + 1)
+	#define CFM_CLK  ((long) CONFIG_SYS_CLK / 400000 + 1)
 #endif

 #define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
-					 (CFG_MBAR & 0xC0000000))
+					 (CONFIG_SYS_MBAR & 0xC0000000))

 void cfm_flash_print_info (flash_info_t * info)
 {
@@ -60,8 +60,8 @@ void cfm_flash_init (flash_info_t * info)
 	MCFCFM_MCR = 0;
 	MCFCFM_CLKD = CFM_CLK;
 	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
-		CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
-		CFG_CLK);
+		CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+		CONFIG_SYS_CLK);
 	MCFCFM_SACC = 0;
 	MCFCFM_DACC = 0;

@@ -86,7 +86,7 @@ void cfm_flash_init (flash_info_t * info)
 	{
 		if (sector == 0)
 		{
-			info->start[sector] = CFG_INT_FLASH_BASE;
+			info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
 		}
 		else
 		{
@@ -187,7 +187,7 @@ int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cn
 	return rc;
 }

-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION

 int cfm_flash_protect(flash_info_t * info,long sector,int prot)
 {
--- a/board/BuS/EB+MCF-EV123/cfm_flash.h
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.h
@@ -33,7 +33,7 @@ extern void cfm_flash_print_info (flash_info_t * info);
 extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
 extern void cfm_flash_init (flash_info_t * info);
 extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION
 extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
 #endif

--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -27,10 +27,10 @@
 #include <common.h>
 #include  "cfm_flash.h"

-#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
 #define FLASH_BANK_SIZE 0x200000

-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

 void flash_print_info (flash_info_t * info)
 {
@@ -83,7 +83,7 @@ unsigned long flash_init (void)
 	int i, j;
 	ulong size = 0;

-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		ulong flashbase = 0;

 		switch (i)
@@ -93,8 +93,8 @@ unsigned long flash_init (void)
 				(AMD_MANUFACT & FLASH_VENDMASK) |
 				(AMD_ID_LV160B & FLASH_TYPEMASK);
 			flash_info[i].size = FLASH_BANK_SIZE;
-			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 			flashbase = PHYS_FLASH_1;
 			for (j = 0; j < flash_info[i].sector_count; j++) {
 				if (j == 0) {
@@ -128,8 +128,8 @@ unsigned long flash_init (void)
 	}

 	flash_protect (FLAG_PROTECT_SET,
-		       CFG_FLASH_BASE,
-		       CFG_FLASH_BASE + 0xffff, &flash_info[0]);
+		       CONFIG_SYS_FLASH_BASE,
+		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);

 	return size;
 }
@@ -177,7 +177,7 @@ int amd_flash_erase_sector(flash_info_t * info, int sector)
 		result = *addr;

 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
 			state = ERR_TIMOUT;
 		}
@@ -303,7 +303,7 @@ volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
 		result = *addr;

 		/* check timeout */
-		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 				state = ERR_TIMOUT;
 		}
 		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
@@ -390,7 +390,7 @@ int amd_flash_protect(flash_info_t * info,long sector,int prot)
 	return rc;
 }

-#ifdef CFG_FLASH_PROTECTION
+#ifdef CONFIG_SYS_FLASH_PROTECTION

 int flash_real_protect(flash_info_t * info,long sector,int prot)
 {
--- a/board/BuS/EB+MCF-EV123/mii.c
+++ b/board/BuS/EB+MCF-EV123/mii.c
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CFG_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CFG_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CFG_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CFG_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
--- a/board/BuS/EB+MCF-EV123/u-boot.lds
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -63,7 +63,7 @@ SECTIONS
    lib_generic/zlib.o	(.text)

 /*    . = env_offset; */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
--- a/board/LEOX/elpt860/README.LEOX
+++ b/board/LEOX/elpt860/README.LEOX
@@ -106,7 +106,7 @@ version - print monitor version
 ?       - alias for 'help'

 ##################################################
-# Environment Variables (CFG_ENV_IS_IN_NVRAM)
+# Environment Variables (CONFIG_ENV_IS_IN_NVRAM)
 ##############################

 LEOX_elpt860: printenv
--- a/board/LEOX/elpt860/elpt860.c
+++ b/board/LEOX/elpt860/elpt860.c
@@ -138,23 +138,23 @@ const uint sdram_table[] = {

 /* ------------------------------------------------------------------------- */

-#define CFG_PC4    0x0800
+#define CONFIG_SYS_PC4    0x0800

-#define CFG_DS1    CFG_PC4
+#define CONFIG_SYS_DS1    CONFIG_SYS_PC4

 /*
 * Very early board init code (fpga boot, etc.)
 */
 int board_early_init_f (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;

 	/*
 	 * Light up the red led on ELPT860 pcb (DS1) (PCDAT)
 	 */
-	immr->im_ioport.iop_pcdat &= ~CFG_DS1;	/* PCDAT (DS1 = 0)                */
-	immr->im_ioport.iop_pcpar &= ~CFG_DS1;	/* PCPAR (0=general purpose I/O)  */
-	immr->im_ioport.iop_pcdir |= CFG_DS1;	/* PCDIR (I/O: 0=input, 1=output) */
+	immr->im_ioport.iop_pcdat &= ~CONFIG_SYS_DS1;	/* PCDAT (DS1 = 0)                */
+	immr->im_ioport.iop_pcpar &= ~CONFIG_SYS_DS1;	/* PCPAR (0=general purpose I/O)  */
+	immr->im_ioport.iop_pcdir |= CONFIG_SYS_DS1;	/* PCDIR (I/O: 0=input, 1=output) */

 	return (0);		/* success */
 }
@@ -181,7 +181,7 @@ int checkboard (void)

 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size8, size9;
 	long int size_b0 = 0;
@@ -207,7 +207,7 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;

 	/*
 	 * The following value is used as an address (i.e. opcode) for
@@ -229,10 +229,10 @@ phys_size_t initdram (int board_type)
 	 * preliminary addresses - these have to be modified after the
 	 * SDRAM size has been determined.
 	 */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;

-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */

 	udelay (200);

@@ -252,7 +252,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);

 	udelay (1000);
@@ -260,7 +260,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);

 	if (size8 < size9) {	/* leave configuration at 9 columns       */
@@ -269,7 +269,7 @@ phys_size_t initdram (int board_type)
 	} else {		/* back to 8 columns                      */

 		size_b0 = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 		/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
 	}
@@ -282,22 +282,22 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size_b0 < 0x02000000) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}

 	/*
 	 * Final mapping: map bigger bank first
 	 */
-	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;

 	{
 		unsigned long reg;

 		/* adjust refresh rate depending on SDRAM type, one bank */
 		reg = memctl->memc_mptpr;
-		reg >>= 1;	/* reduce to CFG_MPTPR_1BK_8K / _4K */
+		reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 		memctl->memc_mptpr = reg;
 	}

@@ -319,7 +319,7 @@ phys_size_t initdram (int board_type)
 static long int
 dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;

 	memctl->memc_mamr = mamr_value;
@@ -329,20 +329,20 @@ dram_size (long int mamr_value, long int *base, long int maxsize)

 /* ------------------------------------------------------------------------- */

-#define CFG_PA1     0x4000
-#define CFG_PA2     0x2000
+#define CONFIG_SYS_PA1     0x4000
+#define CONFIG_SYS_PA2     0x2000

-#define CFG_LBKs    (CFG_PA2 | CFG_PA1)
+#define CONFIG_SYS_LBKs    (CONFIG_SYS_PA2 | CONFIG_SYS_PA1)

 void reset_phy (void)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;

 	/*
 	 * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
 	 *                                          and no AUI loopback
 	 */
-	immr->im_ioport.iop_padat &= ~CFG_LBKs;	/* PADAT (LBK eth 1&2 = 0)        */
-	immr->im_ioport.iop_papar &= ~CFG_LBKs;	/* PAPAR (0=general purpose I/O)  */
-	immr->im_ioport.iop_padir |= CFG_LBKs;	/* PADIR (I/O: 0=input, 1=output) */
+	immr->im_ioport.iop_padat &= ~CONFIG_SYS_LBKs;	/* PADAT (LBK eth 1&2 = 0)        */
+	immr->im_ioport.iop_papar &= ~CONFIG_SYS_LBKs;	/* PAPAR (0=general purpose I/O)  */
+	immr->im_ioport.iop_padir |= CONFIG_SYS_LBKs;	/* PADIR (I/O: 0=input, 1=output) */
 }
--- a/board/LEOX/elpt860/flash.c
+++ b/board/LEOX/elpt860/flash.c
@@ -33,7 +33,7 @@
 /*
 ** Note 1: In this file, you have to provide the following variable:
 ** ------
-**              flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]
+**              flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS]
 ** 'flash_info_t' structure is defined into 'include/flash.h'
 ** and defined as extern into 'common/cmd_flash.c'
 **
@@ -61,11 +61,11 @@
 #include <mpc8xx.h>


-#ifndef	CFG_ENV_ADDR
-#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */

 /*-----------------------------------------------------------------------
 * Internal Functions
@@ -82,13 +82,13 @@ static int write_byte (flash_info_t *info, ulong dest, uchar data);
 unsigned long
 flash_init (void)
 {
-  volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+  volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
  volatile memctl8xx_t *memctl = &immap->im_memctl;
  unsigned long         size_b0;
  int i;

  /* Init: no FLASHes known */
-  for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+  for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
    {
      flash_info[i].flash_id = FLASH_UNKNOWN;
    }
@@ -105,28 +105,28 @@ flash_init (void)
    }

  /* Remap FLASH according to real size */
-  memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-  memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+  memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+  memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;

  /* Re-do sizing to get full correct info */
-  size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE,
+  size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE,
 			    &flash_info[0]);

-  flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);

-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
  /* monitor protection ON by default */
  flash_protect (FLAG_PROTECT_SET,
-		 CFG_MONITOR_BASE,
-		 CFG_MONITOR_BASE + monitor_flash_len-1,
+		 CONFIG_SYS_MONITOR_BASE,
+		 CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1,
 		 &flash_info[0]);
 #endif

-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
  /* ENV protection ON by default */
  flash_protect(FLAG_PROTECT_SET,
-		CFG_ENV_ADDR,
-		CFG_ENV_ADDR + CFG_ENV_SIZE-1,
+		CONFIG_ENV_ADDR,
+		CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1,
 		&flash_info[0]);
 #endif

@@ -383,7 +383,7 @@ flash_erase (flash_info_t  *info,
  addr = (volatile unsigned char *)(info->start[l_sect]);
  while ( (addr[0] & 0x80) != 0x80 )
    {
-      if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT )
+      if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT )
 	{
 	  printf ("Timeout\n");
 	  return ( 1 );
@@ -556,7 +556,7 @@ write_word (flash_info_t  *info,
  start = get_timer (0);
  while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) )
    {
-      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+      if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
 	{
 	  return (1);
 	}
@@ -602,7 +602,7 @@ write_byte (flash_info_t  *info,
  start = get_timer (0);
  while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) )
    {
-      if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+      if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT )
 	{
 	  return (1);
 	}
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -77,7 +77,7 @@ SECTIONS
    lib_ppc/ticks.o			(.text)

    . = env_offset;
-    common/environment.o		(.text)
+    common/env_embedded.o		(.text)

    *(.text)
    *(.fixup)
@@ -147,6 +147,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/LEOX/elpt860/u-boot.lds.debug
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -70,7 +70,7 @@ SECTIONS
    lib_generic/crc32.o		(.text)

    . = env_offset;
-    common/environment.o	(.text)
+    common/env_embedded.o	(.text)

    *(.text)
    *(.fixup)
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <command.h>
 #include <pci.h>
+#include <netdev.h>
 #include "articiaS.h"
 #include "memio.h"
 #include "via686.h"
@@ -111,3 +112,11 @@ void pci_init_board (void)
 	articiaS_pci_init ();
 #endif
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_3COM)
+	eth_3com_initialize(bis);
+#endif
+	return 0;
+}
--- a/board/MAI/AmigaOneG3SE/articiaS_pci.c
+++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c
@@ -313,7 +313,7 @@ void articiaS_pci_init (void)
 		   ARTICIAS_SYS_BUS,
 		   ARTICIAS_SYS_PHYS,
 		   ARTICIAS_SYS_MAXSIZE,
-		   PCI_REGION_MEM | PCI_REGION_MEMORY);
+		   PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);

    /* PCI memory space */
    pci_set_region(articiaS_hose.regions + 1,
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -27,7 +27,7 @@ struct bootcode_block bblk;

 int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
-	unsigned char *load_address = (unsigned char *) CFG_LOAD_ADDR;
+	unsigned char *load_address = (unsigned char *) CONFIG_SYS_LOAD_ADDR;
 	unsigned char *base_address;
 	unsigned long offset;

@@ -122,7 +122,7 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 #if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
 U_BOOT_CMD(
 	boota,   3,      1,      do_boota,
-	"boota   - boot an Amiga kernel\n",
+	"boot an Amiga kernel",
 	"address disk"
 );
 #endif /* _CMD_BOOTA_H */
--- a/board/MAI/AmigaOneG3SE/enet.c
+++ b/board/MAI/AmigaOneG3SE/enet.c
@@ -28,6 +28,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>

--- a/board/MAI/AmigaOneG3SE/flash.c
+++ b/board/MAI/AmigaOneG3SE/flash.c
@@ -1,14 +1,14 @@
 #include <common.h>
 #include <flash.h>

-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];


 unsigned long flash_init(void)
 {
    int i;

-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
    {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
 	flash_info[i].sector_count = 0;
--- a/board/MAI/AmigaOneG3SE/flash_new.c
+++ b/board/MAI/AmigaOneG3SE/flash_new.c
@@ -39,7 +39,7 @@
 #endif
 /*---------------------------------------------------------------------*/

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];

 static ulong flash_get_size (ulong addr, flash_info_t *info);
 static int flash_get_offsets (ulong base, flash_info_t *info);
@@ -80,7 +80,7 @@ unsigned long flash_init_old(void)
 {
    int i;

-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
    {
 	flash_info[i].flash_id = FLASH_UNKNOWN;
 	flash_info[i].sector_count = 0;
@@ -101,33 +101,33 @@ unsigned long flash_init (void)
 	flash_to_xd();

 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = 0;
 		flash_info[i].size = 0;
 	}

-	DEBUGF("\n## Get flash size @ 0x%08x\n", CFG_FLASH_BASE);
+	DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE);

-	flash_size = flash_get_size (CFG_FLASH_BASE, flash_info);
+	flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info);

 	DEBUGF("## Flash bank size: %08lx\n", flash_size);

 	if (flash_size) {
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
-    CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_FLASH_MAX_SIZE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \
+    CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE
 		/* monitor protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_MONITOR_BASE,
-			      CFG_MONITOR_BASE + monitor_flash_len - 1,
+			      CONFIG_SYS_MONITOR_BASE,
+			      CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 			      &flash_info[0]);
 #endif

-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
 		/* ENV protection ON by default */
 		flash_protect(FLAG_PROTECT_SET,
-			      CFG_ENV_ADDR,
-			      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			      CONFIG_ENV_ADDR,
+			      CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 			      &flash_info[0]);
 #endif

@@ -286,10 +286,10 @@ static ulong flash_get_size (ulong addr, flash_info_t *info)

 	}

-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}

 	if (! flash_get_offsets (addr, info)) {
@@ -418,10 +418,10 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = info->start[l_sect];

-	DEBUGF ("Start erase timeout: %d\n", CFG_FLASH_ERASE_TOUT);
+	DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT);

 	while ((in8(addr) & 0x80) != 0x80) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			flash_reset (info->start[0]);
 			flash_to_mem();
@@ -562,7 +562,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 		/* data polling for D7 */
 		start = get_timer (0);
 		while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) {
-			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 				flash_reset (addr);
 				flash_to_mem();
 				return (1);
--- a/board/MAI/AmigaOneG3SE/i8259.h
+++ b/board/MAI/AmigaOneG3SE/i8259.h
@@ -21,20 +21,20 @@
 * MA 02111-1307 USA
 */

-#define ICW1_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
-#define ICW1_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
-#define ICW2_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
-#define ICW2_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
-#define ICW3_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
-#define ICW3_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
-#define ICW4_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
-#define ICW4_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
-#define OCW1_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
-#define OCW1_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
-#define OCW2_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
-#define OCW2_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
-#define OCW3_1  CFG_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
-#define OCW3_2  CFG_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3
+#define ICW1_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW1
+#define ICW1_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW1
+#define ICW2_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW2
+#define ICW2_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW2
+#define ICW3_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW3
+#define ICW3_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW3
+#define ICW4_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_ICW4
+#define ICW4_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_ICW4
+#define OCW1_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW1
+#define OCW1_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW1
+#define OCW2_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW2
+#define OCW2_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW2
+#define OCW3_1  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT1_OCW3
+#define OCW3_2  CONFIG_SYS_ISA_IO_BASE_ADDRESS + ISA_INT2_OCW3

 #define IMR_1   OCW1_1
 #define IMR_2   OCW1_2
--- a/board/MAI/AmigaOneG3SE/interrupts.c
+++ b/board/MAI/AmigaOneG3SE/interrupts.c
@@ -119,12 +119,12 @@ int interrupt_init (void)
 #ifdef DEBUG
 	puts("interrupt_init: setting decrementer_count\n");
 #endif
-	decrementer_count = get_tbclk() / CFG_HZ;
+	decrementer_count = get_tbclk() / CONFIG_SYS_HZ;

 #ifdef DEBUG
 	puts("interrupt_init: setting actual decremter\n");
 #endif
-	set_dec (get_tbclk() / CFG_HZ);
+	set_dec (get_tbclk() / CONFIG_SYS_HZ);

 #ifdef DEBUG
 	puts("interrupt_init: clearing external interrupt table\n");
--- a/board/MAI/AmigaOneG3SE/ps2kbd.c
+++ b/board/MAI/AmigaOneG3SE/ps2kbd.c
@@ -214,7 +214,7 @@ int isa_kbd_init (void)
 	}
 }

-#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+#ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 extern int overwrite_console (void);
 #else
 int overwrite_console (void)
@@ -492,22 +492,22 @@ unsigned char handle_kbd_event (void)
 */
 unsigned char kbd_read_status(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT));
 }

 unsigned char kbd_read_input(void)
 {
-	return(in8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
+	return(in8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT));
 }

 void kbd_write_command(unsigned char cmd)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_COMMAND_PORT,cmd);
 }

 void kbd_write_output(unsigned char data)
 {
-	out8(CFG_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
+	out8(CONFIG_SYS_ISA_IO_BASE_ADDRESS + KDB_DATA_PORT, data);
 }

 int kbd_read_data(void)
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -6,7 +6,7 @@

 DECLARE_GLOBAL_DATA_PTR;

-#ifndef CFG_NS16550
+#ifndef CONFIG_SYS_NS16550
 static uint32 ComPort1;

 uint16 SerialEcho = 1;
@@ -147,8 +147,8 @@ void serial_debug_putc (int c)

 #else

-const NS16550_t Com0 = (NS16550_t) CFG_NS16550_COM1;
-const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2;
+const NS16550_t Com0 = (NS16550_t) CONFIG_SYS_NS16550_COM1;
+const NS16550_t Com1 = (NS16550_t) CONFIG_SYS_NS16550_COM2;

 int serial_init (void)
 {
--- a/board/MAI/AmigaOneG3SE/u-boot.lds
+++ b/board/MAI/AmigaOneG3SE/u-boot.lds
@@ -62,7 +62,7 @@ SECTIONS
    cpu/74xx_7xx/start.o	(.text)
 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
--- a/board/MAI/AmigaOneG3SE/usb_uhci.c
+++ b/board/MAI/AmigaOneG3SE/usb_uhci.c
@@ -627,7 +627,7 @@ int usb_lowlevel_init(void)
 	pci_read_config_dword(busdevfunc,PCI_BASE_ADDRESS_4,&usb_base_addr);
 	USB_UHCI_PRINTF("IO Base Address = 0x%lx\n",usb_base_addr);
 	usb_base_addr&=0xFFFFFFF0;
-	usb_base_addr+=CFG_ISA_IO_BASE_ADDRESS;
+	usb_base_addr+=CONFIG_SYS_ISA_IO_BASE_ADDRESS;
 	rh.devnum = 0;
 	usb_init_skel();
 	reset_hc();
@@ -801,7 +801,7 @@ int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	unsigned short wIndex;
 	unsigned short wLength;

-	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+	if (usb_pipeint(pipe)) {
 		printf("Root-Hub submit IRQ: NOT implemented\n");
 #if 0
 		uhci->rh.urb = urb;
--- a/board/MAI/menu/cmd_menu.c
+++ b/board/MAI/menu/cmd_menu.c
@@ -10,7 +10,7 @@ int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] )
 #if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
 U_BOOT_CMD(
 	menu,   1,      1,      do_menu,
-	"menu    - display BIOS setup menu\n",
+	"display BIOS setup menu",
 	""
 );
 #endif
--- a/board/Marvell/common/bootseq.txt
+++ b/board/Marvell/common/bootseq.txt
@@ -88,7 +88,7 @@ in_flash:
 		    nothing
 		mem_malloc_init
 		malloc_bin_reloc
-		spi_init (r or f)??? (CFG_ENV_IS_IN_EEPROM)
+		spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM)
 		env_relocated
 		misc_init_r(bd): (board/evb64260/evb64260.c)
 		    mpsc_init2
--- a/board/Marvell/common/flash.c
+++ b/board/Marvell/common/flash.c
@@ -48,7 +48,7 @@
 int flash_erase_intel (flash_info_t * info, int s_first, int s_last);
 int write_word_intel (bank_addr_t addr, bank_word_t value);

-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */

 /*-----------------------------------------------------------------------
 * Functions
@@ -68,14 +68,14 @@ unsigned long flash_init (void)
 	unsigned long base, flash_size;

 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}

 	/* the boot flash */
-	base = CFG_FLASH_BASE;
+	base = CONFIG_SYS_FLASH_BASE;
 	size_b0 =
-		flash_get_size (CFG_BOOT_FLASH_WIDTH, (vu_long *) base,
+		flash_get_size (CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *) base,
 				&flash_info[0]);

 	printf ("[%ldkB@%lx] ", size_b0 / 1024, base);
@@ -84,11 +84,11 @@ unsigned long flash_init (void)
 		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n", base, size_b0, size_b0 << 20);
 	}

-	base = memoryGetDeviceBaseAddress (CFG_EXTRA_FLASH_DEVICE);
+	base = memoryGetDeviceBaseAddress (CONFIG_SYS_EXTRA_FLASH_DEVICE);
 /*	base = memoryGetDeviceBaseAddress(DEV_CS3_BASE_ADDR);*/
-	for (i = 1; i < CFG_MAX_FLASH_BANKS; i++) {
+	for (i = 1; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
 		unsigned long size =
-			flash_get_size (CFG_EXTRA_FLASH_WIDTH,
+			flash_get_size (CONFIG_SYS_EXTRA_FLASH_WIDTH,
 					(vu_long *) base, &flash_info[i]);

 		printf ("[%ldMB@%lx] ", size >> 20, base);
@@ -617,7 +617,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 							/* has the timeout limit been reached? */
 							if (get_timer (start)
 							    >
-							    CFG_FLASH_ERASE_TOUT)
+							    CONFIG_SYS_FLASH_ERASE_TOUT)
 							{
 								/* timeout limit reached */
 								printf ("Time out limit reached erasing sector at address %08lx\n", info->start[sect]);
@@ -776,7 +776,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	addr = (volatile unsigned char *) (info->start[l_sect]);
 	/* broken for 2x16: TODO */
 	while ((addr[0] & 0x80) != 0x80) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -956,7 +956,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 				{
 					/* has the timeout limit been reached? */
 					if (get_timer (start) >
-					    CFG_FLASH_WRITE_TOUT) {
+					    CONFIG_SYS_FLASH_WRITE_TOUT) {
 						/* timeout limit reached */
 						printf ("Time out limit reached programming address %08lx with data %08lx\n", dest, data);
 						/* reset the flash */
@@ -1064,7 +1064,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *) dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
--- a/board/Marvell/common/i2c.c
+++ b/board/Marvell/common/i2c.c
@@ -48,7 +48,7 @@ static void i2c_init (int speed, int slaveaddr)
 	unsigned int actualN = 0, actualM = 0;
 	unsigned int control, status;
 	unsigned int minMargin = 0xffffffff;
-	unsigned int tclk = CFG_TCLK;
+	unsigned int tclk = CONFIG_SYS_TCLK;
 	unsigned int i2cFreq = speed;	/* 100000 max. Fast mode not supported */

 	DP (puts ("i2c_init\n"));
@@ -372,7 +372,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	  int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;

 	DP (puts ("i2c_read\n"));

@@ -447,7 +447,7 @@ i2c_write (uchar dev_addr, unsigned int offset, int alen, uchar * data,
 	   int len)
 {
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;

 	DP (puts ("i2c_write\n"));

@@ -500,7 +500,7 @@ int i2c_probe (uchar chip)
 	unsigned int i2c_status;
 #endif
 	uchar status = 0;
-	unsigned int i2cFreq = CFG_I2C_SPEED;
+	unsigned int i2cFreq = CONFIG_SYS_I2C_SPEED;

 	DP (puts ("i2c_probe\n"));

--- a/board/Marvell/common/intel_flash.c
+++ b/board/Marvell/common/intel_flash.c
@@ -152,7 +152,7 @@ int write_word_intel (bank_addr_t addr, bank_word_t value)
 	/* data polling for D7 */
 	start = get_timer (0);
 	do {
-		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			retval = 1;
 			goto done;
 		}
@@ -227,7 +227,7 @@ int flash_erase_intel (flash_info_t * info, int s_first, int s_last)
 			do {
 				now = get_timer (start);

-				if (now - estart > CFG_FLASH_ERASE_TOUT) {
+				if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout (sect %d)\n", sect);
 					haderr = 1;
 					break;
--- a/board/Marvell/common/intel_flash.h
+++ b/board/Marvell/common/intel_flash.h
@@ -68,7 +68,7 @@
 /* ID and Lock Configuration */
 #define CHIP_RD_ID_LOCK		0x01		/* Bit 0 of each byte */
 #define CHIP_RD_ID_MAN		0x89		/* Manufacturer code = 0x89 */
-#define CHIP_RD_ID_DEV		CFG_FLASH_ID
+#define CHIP_RD_ID_DEV		CONFIG_SYS_FLASH_ID

 /* dimensions */
 #define CHIP_WIDTH		2		/* chips are in 16 bit mode */
--- a/board/Marvell/common/misc.S
+++ b/board/Marvell/common/misc.S
@@ -16,7 +16,7 @@
 board_relocate_rom:
 	mflr	r7
 	/* update the location of the GT registers */
-	lis	r11, CFG_GT_REGS@h
+	lis	r11, CONFIG_SYS_GT_REGS@h
 	/* if we're using ECC, we must use the DMA engine to copy ourselves */
 	bl	start_idma_transfer_0
 	bl	wait_for_idma_0
@@ -29,12 +29,12 @@ board_relocate_rom:
 board_init_ecc:
 	mflr	r7
 	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
+	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */

 	/* now that we're running from ram, init the rest of main memory
 	 * for ECC use */
-	lis	r8, CFG_MONITOR_LEN@h
-	ori	r8, r8, CFG_MONITOR_LEN@l
+	lis	r8, CONFIG_SYS_MONITOR_LEN@h
+	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l

 	divw	r3, r10, r8

@@ -120,15 +120,15 @@ stop_idma_engine_0:
 	blr
 #endif

-#ifdef CFG_BOARD_ASM_INIT
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
 	/* NOTE: trashes r3-r7 */
 	.globl board_asm_init
 board_asm_init:
 	/* just move the GT registers to where they belong */
-	lis	r3, CFG_DFL_GT_REGS@h
-	ori	r3, r3, CFG_DFL_GT_REGS@l
-	lis	r4, CFG_GT_REGS@h
-	ori	r4, r4, CFG_GT_REGS@l
+	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
+	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
+	lis	r4, CONFIG_SYS_GT_REGS@h
+	ori	r4, r4, CONFIG_SYS_GT_REGS@l
 	li	r5, INTERNAL_SPACE_DECODE

 	/* test to see if we've already moved */
--- a/board/Marvell/common/ns16550.c
+++ b/board/Marvell/common/ns16550.c
@@ -1,7 +1,7 @@
 /*
 * COM1 NS16550 support
 * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
 *
 * further modified by Josh Huber <huber@mclx.com> to support
 * the DUART on the Galileo Eval board. (db64360)
@@ -13,8 +13,8 @@
 #ifdef ZUMA_NTL
 /* no 16550 device */
 #else
-const NS16550_t COM_PORTS[] = { (NS16550_t) (CFG_DUART_IO + 0),
-	(NS16550_t) (CFG_DUART_IO + 0x20)
+const NS16550_t COM_PORTS[] = { (NS16550_t) (CONFIG_SYS_DUART_IO + 0),
+	(NS16550_t) (CONFIG_SYS_DUART_IO + 0x20)
 };

 volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
--- a/board/Marvell/common/ns16550.h
+++ b/board/Marvell/common/ns16550.h
@@ -2,7 +2,7 @@
 * NS16550 Serial Port
 * originally from linux source (arch/ppc/boot/ns16550.h)
 * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
+ * have addresses as offsets from CONFIG_SYS_ISA_BASE
 * added a few more definitions
 * added prototypes for ns16550.c
 * reduced no of com ports to 2
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -52,17 +52,17 @@ DECLARE_GLOBAL_DATA_PTR;

 int serial_init (void)
 {
-#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
+#if (defined CONFIG_SYS_INIT_CHAN1) || (defined CONFIG_SYS_INIT_CHAN2)
 	int clock_divisor = 230400 / gd->baudrate;
 #endif

 	mpsc_init (gd->baudrate);

 	/* init the DUART chans so that KGDB in the kernel can use them */
-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 	return (0);
@@ -97,10 +97,10 @@ int serial_init (void)
 {
 	int clock_divisor = 230400 / gd->baudrate;

-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	(void) NS16550_init (0, clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	(void) NS16550_init (1, clock_divisor);
 #endif
 	return (0);
@@ -109,29 +109,29 @@ int serial_init (void)
 void serial_putc (const char c)
 {
 	if (c == '\n')
-		NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
+		NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], '\r');

-	NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
+	NS16550_putc (COM_PORTS[CONFIG_SYS_DUART_CHAN], c);
 }

 int serial_getc (void)
 {
-	return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_getc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }

 int serial_tstc (void)
 {
-	return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
+	return NS16550_tstc (COM_PORTS[CONFIG_SYS_DUART_CHAN]);
 }

 void serial_setbrg (void)
 {
 	int clock_divisor = 230400 / gd->baudrate;

-#ifdef CFG_INIT_CHAN1
+#ifdef CONFIG_SYS_INIT_CHAN1
 	NS16550_reinit (COM_PORTS[0], clock_divisor);
 #endif
-#ifdef CFG_INIT_CHAN2
+#ifdef CONFIG_SYS_INIT_CHAN2
 	NS16550_reinit (COM_PORTS[1], clock_divisor);
 #endif
 }
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -33,6 +33,7 @@
 #include "../include/pci.h"
 #include "../include/mv_gen_reg.h"
 #include <net.h>
+#include <netdev.h>

 #include "eth.h"
 #include "mpsc.h"
@@ -51,13 +52,10 @@
 #define DP(x)
 #endif

-extern void flush_data_cache (void);
-extern void invalidate_l1_instruction_cache (void);
-
 /* ------------------------------------------------------------------------- */

 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */

 /* Unfortunately, we cant change it while we are in flash, so we initialize it
 * to the "final" value. This means that any debug_led calls before
@@ -66,7 +64,7 @@ extern void invalidate_l1_instruction_cache (void);
 */

 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);

 /* ------------------------------------------------------------------------- */
@@ -129,7 +127,7 @@ static void gt_pci_config (void)

 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);

 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -138,7 +136,7 @@ static void gt_pci_config (void)

 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}

 	/* Enable master */
@@ -156,21 +154,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);

-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);

-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);

-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);

 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -186,7 +184,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif

 }
@@ -202,7 +200,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);

 	/* set the SINGLE_CPU bit  see MV64360 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif

@@ -253,7 +251,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */

-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);

 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -299,56 +297,56 @@ int board_early_init_f (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
 		sram_boot = 1;
 	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);

-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);


 	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR		/* set port parameters for SRAM device module access */
 	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif

-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif

-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif


 	gt_cpu_config ();

 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);

-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -361,7 +359,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -382,9 +380,9 @@ void after_reloc (ulong dest_addr, gd_t * gd)
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
 	}
 	display_mem_map ();
 	/* now, jump to the main ppcboot board init code */
@@ -404,7 +402,7 @@ int checkboard (void)
 {
 	int l_type = 0;

-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }

@@ -417,34 +415,34 @@ void debug_led (int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x08000);
 			break;

 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x0c000);
 			break;

 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x14000);
 			break;

 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x18000);
 			break;

 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x1c000);
 			break;
 		}
@@ -515,7 +513,7 @@ int display_mem_map (void)

 /* DRAM check routines copied from gw8260 */

-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)

 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -546,7 +544,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }


-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)

 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -609,7 +607,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -636,9 +634,9 @@ int mem_test_data (void)

 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */

-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -663,8 +661,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;

 	/* write address to each location */
@@ -681,9 +679,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */

-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -741,7 +739,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */

 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -773,8 +771,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;

 	unsigned int i;

@@ -850,9 +848,9 @@ int testdram (void)
 /*    runwalk = 0; */

 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -862,7 +860,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -872,7 +870,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -888,7 +886,7 @@ int testdram (void)
 	return 0;

 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */

 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -927,10 +925,13 @@ void board_prebootm_init ()
 /* MV_REG_WRITE (MV64360_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0x0000ff00); */

 /* Relocate MV64360 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);

 	icache_disable ();
-	invalidate_l1_instruction_cache ();
-	flush_data_cache ();
 	dcache_disable ();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
 			  (MV64360_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));

 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);

 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@ int galbrg_set_baudrate (int channel, int rate)

 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif

 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
@@ -859,14 +859,14 @@ void pci_init_board (void)

 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);

 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);

 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@ void pci_init_board (void)

 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);

 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);

 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */

-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT

 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							dimmInfo->
 								maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							printf ("*********************************************************\n");
 							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1290,37 +1290,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 	case 0x0:
 	case 0x80:		/* refresh period is 15.625 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
 					/ (float) 1000000.0);
 		break;
 	case 0x1:
 	case 0x81:		/* refresh period is 3.9 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x2:
 	case 0x82:		/* refresh period is 7.8 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x3:
 	case 0x83:		/* refresh period is 31.3 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x4:
 	case 0x84:		/* refresh period is 62.5 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x5:
 	case 0x85:		/* refresh period is 125 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	default:		/* refresh period undefined */
@@ -1807,7 +1807,7 @@ phys_size_t initdram (int board_type)

 	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);

-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;
--- a/board/Marvell/db64360/u-boot.lds
+++ b/board/Marvell/db64360/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS

 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */

    *(.text)
    *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -33,6 +33,7 @@
 #include "../include/pci.h"
 #include "../include/mv_gen_reg.h"
 #include <net.h>
+#include <netdev.h>

 #include "eth.h"
 #include "mpsc.h"
@@ -51,13 +52,10 @@
 #define DP(x)
 #endif

-extern void flush_data_cache (void);
-extern void invalidate_l1_instruction_cache (void);
-
 /* ------------------------------------------------------------------------- */

 /* this is the current GT register space location */
-/* it starts at CFG_DFL_GT_REGS but moves later to CFG_GT_REGS */
+/* it starts at CONFIG_SYS_DFL_GT_REGS but moves later to CONFIG_SYS_GT_REGS */

 /* Unfortunately, we cant change it while we are in flash, so we initialize it
 * to the "final" value. This means that any debug_led calls before
@@ -66,7 +64,7 @@ extern void invalidate_l1_instruction_cache (void);
 */

 void board_prebootm_init (void);
-unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS;
+unsigned int INTERNAL_REG_BASE_ADDR = CONFIG_SYS_GT_REGS;
 int display_mem_map (void);

 /* ------------------------------------------------------------------------- */
@@ -129,7 +127,7 @@ static void gt_pci_config (void)

 		GT_REG_WRITE (PCI_0_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_0_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);

 	}
 	if ((GTREGREAD (PCI_1_MODE) & (BIT4 | BIT5)) != 0) {	/*if  PCI-X */
@@ -138,7 +136,7 @@ static void gt_pci_config (void)

 		GT_REG_WRITE (PCI_1_CONFIG_ADDR, BIT31 | val);
 		GT_REG_WRITE (PCI_1_CONFIG_DATA_VIRTUAL_REG,
-			      (stat & 0xffff0000) | CFG_PCI_IDSEL);
+			      (stat & 0xffff0000) | CONFIG_SYS_PCI_IDSEL);
 	}

 	/* Enable master */
@@ -156,21 +154,21 @@ static void gt_pci_config (void)
 	/* ronen- add write to pci remap registers for 64460.
 	   in 64360 when writing to pci base go and overide remap automaticaly,
 	   in 64460 it doesn't */
-	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CFG_PCI0_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_0_IO_SIZE, (CFG_PCI0_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_IO_BASE_ADDR, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0I_O_ADDRESS_REMAP, CONFIG_SYS_PCI0_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_0_IO_SIZE, (CONFIG_SYS_PCI0_IO_SIZE - 1) >> 16);

-	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CFG_PCI0_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CFG_PCI0_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI0_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_0_MEMORY0_SIZE, (CONFIG_SYS_PCI0_MEM_SIZE - 1) >> 16);

-	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CFG_PCI1_IO_BASE >> 16);
-	GT_REG_WRITE (PCI_1_IO_SIZE, (CFG_PCI1_IO_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_IO_BASE_ADDR, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1I_O_ADDRESS_REMAP, CONFIG_SYS_PCI1_IO_BASE >> 16);
+	GT_REG_WRITE (PCI_1_IO_SIZE, (CONFIG_SYS_PCI1_IO_SIZE - 1) >> 16);

-	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CFG_PCI1_MEM_BASE >> 16);
-	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CFG_PCI1_MEM_SIZE - 1) >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_BASE_ADDR, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1MEMORY0_ADDRESS_REMAP, CONFIG_SYS_PCI1_MEM_BASE >> 16);
+	GT_REG_WRITE (PCI_1_MEMORY0_SIZE, (CONFIG_SYS_PCI1_MEM_SIZE - 1) >> 16);

 	/* PCI interface settings */
 	/* Timeout set to retry forever */
@@ -186,7 +184,7 @@ static void gt_pci_config (void)
 	for (stat = 0; stat <= PCI_HOST1; stat++)
 		pciWriteConfigReg (stat,
 				   PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
-				   SELF, CFG_GT_REGS);
+				   SELF, CONFIG_SYS_GT_REGS);
 #endif

 }
@@ -202,7 +200,7 @@ static void gt_cpu_config (void)
 	tmp = GTREGREAD (CPU_CONFIGURATION);

 	/* set the SINGLE_CPU bit  see MV64460 P.399 */
-#ifndef CFG_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
+#ifndef CONFIG_SYS_GT_DUAL_CPU		/* SINGLE_CPU seems to cause JTAG problems */
 	tmp |= CPU_CONF_SINGLE_CPU;
 #endif

@@ -253,7 +251,7 @@ int board_early_init_f (void)
 	 * it last time. (huber)
 	 */

-	my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS);
+	my_remap_gt_regs (CONFIG_SYS_DFL_GT_REGS, CONFIG_SYS_GT_REGS);

 	/* No PCI in first release of Port To_do: enable it. */
 #ifdef CONFIG_PCI
@@ -299,56 +297,56 @@ int board_early_init_f (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE)
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE)
 		sram_boot = 1;
 	if (!sram_boot)
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);

-	memoryMapDeviceSpace (DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
-	memoryMapDeviceSpace (DEVICE2, CFG_DEV2_SPACE, CFG_DEV2_SIZE);
-	memoryMapDeviceSpace (DEVICE3, CFG_DEV3_SPACE, CFG_DEV3_SIZE);
+	memoryMapDeviceSpace (DEVICE1, CONFIG_SYS_DEV1_SPACE, CONFIG_SYS_DEV1_SIZE);
+	memoryMapDeviceSpace (DEVICE2, CONFIG_SYS_DEV2_SPACE, CONFIG_SYS_DEV2_SIZE);
+	memoryMapDeviceSpace (DEVICE3, CONFIG_SYS_DEV3_SPACE, CONFIG_SYS_DEV3_SIZE);


 	/* configure device timing */
-#ifdef CFG_DEV0_PAR		/* set port parameters for SRAM device module access */
+#ifdef CONFIG_SYS_DEV0_PAR		/* set port parameters for SRAM device module access */
 	if (!sram_boot)
-		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CFG_DEV0_PAR);
+		GT_REG_WRITE (DEVICE_BANK0PARAMETERS, CONFIG_SYS_DEV0_PAR);
 #endif

-#ifdef CFG_DEV1_PAR		/* set port parameters for RTC device module access */
-	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CFG_DEV1_PAR);
+#ifdef CONFIG_SYS_DEV1_PAR		/* set port parameters for RTC device module access */
+	GT_REG_WRITE (DEVICE_BANK1PARAMETERS, CONFIG_SYS_DEV1_PAR);
 #endif
-#ifdef CFG_DEV2_PAR		/* set port parameters for DUART device module access */
-	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
+#ifdef CONFIG_SYS_DEV2_PAR		/* set port parameters for DUART device module access */
+	GT_REG_WRITE (DEVICE_BANK2PARAMETERS, CONFIG_SYS_DEV2_PAR);
 #endif

-#ifdef CFG_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
+#ifdef CONFIG_SYS_32BIT_BOOT_PAR	/* set port parameters for Flash device module access */
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD (DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
 		/* 32 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS,
-			      CFG_32BIT_BOOT_PAR);
+			      CONFIG_SYS_32BIT_BOOT_PAR);
 	} else {
 		/* 8 bit boot flash */
-		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CFG_32BIT_BOOT_PAR);
-		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BANK3PARAMETERS, CONFIG_SYS_32BIT_BOOT_PAR);
+		GT_REG_WRITE (DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);
 	}
 #else
 	/* 8 bit boot flash only */
-/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);*/
+/*	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CONFIG_SYS_8BIT_BOOT_PAR);*/
 #endif


 	gt_cpu_config ();

 	/* MPP setup */
-	GT_REG_WRITE (MPP_CONTROL0, CFG_MPP_CONTROL_0);
-	GT_REG_WRITE (MPP_CONTROL1, CFG_MPP_CONTROL_1);
-	GT_REG_WRITE (MPP_CONTROL2, CFG_MPP_CONTROL_2);
-	GT_REG_WRITE (MPP_CONTROL3, CFG_MPP_CONTROL_3);
+	GT_REG_WRITE (MPP_CONTROL0, CONFIG_SYS_MPP_CONTROL_0);
+	GT_REG_WRITE (MPP_CONTROL1, CONFIG_SYS_MPP_CONTROL_1);
+	GT_REG_WRITE (MPP_CONTROL2, CONFIG_SYS_MPP_CONTROL_2);
+	GT_REG_WRITE (MPP_CONTROL3, CONFIG_SYS_MPP_CONTROL_3);

-	GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL);
+	GT_REG_WRITE (GPP_LEVEL_CONTROL, CONFIG_SYS_GPP_LEVEL_CONTROL);
 	DEBUG_LED0_ON ();
 	DEBUG_LED1_ON ();
 	DEBUG_LED2_ON ();
@@ -361,7 +359,7 @@ int board_early_init_f (void)
 int misc_init_r ()
 {
 	icache_enable ();
-#ifdef CFG_L2
+#ifdef CONFIG_SYS_L2
 	l2cache_enable ();
 #endif
 #ifdef CONFIG_MPSC
@@ -382,9 +380,9 @@ void after_reloc (ulong dest_addr, gd_t * gd)
 	/* check to see if we booted from the sram.  If so, move things
 	 * back to the way they should be. (we're running from main
 	 * memory at this point now */
-	if (memoryGetDeviceBaseAddress (DEVICE0) == CFG_DFL_BOOTCS_BASE) {
-		memoryMapDeviceSpace (DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
-		memoryMapDeviceSpace (BOOT_DEVICE, CFG_DFL_BOOTCS_BASE, _8M);
+	if (memoryGetDeviceBaseAddress (DEVICE0) == CONFIG_SYS_DFL_BOOTCS_BASE) {
+		memoryMapDeviceSpace (DEVICE0, CONFIG_SYS_DEV0_SPACE, CONFIG_SYS_DEV0_SIZE);
+		memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_DFL_BOOTCS_BASE, _8M);
 	}
 	display_mem_map ();
 	/* now, jump to the main ppcboot board init code */
@@ -404,7 +402,7 @@ int checkboard (void)
 {
 	int l_type = 0;

-	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	printf ("BOARD: %s\n", CONFIG_SYS_BOARD_NAME);
 	return (l_type);
 }

@@ -417,34 +415,34 @@ void debug_led (int led, int mode)
 	if (mode == 1) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x08000);
 			break;

 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x0c000);
 			break;

 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x10000);
 			break;
 		}
 	} else if (mode == 0) {
 		switch (led) {
 		case 0:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x14000);
 			break;

 		case 1:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x18000);
 			break;

 		case 2:
-			addr = (int *) ((unsigned int) CFG_DEV1_SPACE |
+			addr = (int *) ((unsigned int) CONFIG_SYS_DEV1_SPACE |
 					0x1c000);
 			break;
 		}
@@ -515,7 +513,7 @@ int display_mem_map (void)

 /* DRAM check routines copied from gw8260 */

-#if defined (CFG_DRAM_TEST)
+#if defined (CONFIG_SYS_DRAM_TEST)

 /*********************************************************************/
 /* NAME:  move64() -  moves a double word (64-bit)		     */
@@ -546,7 +544,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
 }


-#if defined (CFG_DRAM_TEST_DATA)
+#if defined (CONFIG_SYS_DRAM_TEST_DATA)

 unsigned long long pattern[] = {
 	0xaaaaaaaaaaaaaaaaULL,
@@ -609,7 +607,7 @@ unsigned long long pattern[] = {
 /*********************************************************************/
 int mem_test_data (void)
 {
-	unsigned long long *pmem = (unsigned long long *) CFG_MEMTEST_START;
+	unsigned long long *pmem = (unsigned long long *) CONFIG_SYS_MEMTEST_START;
 	unsigned long long temp64 = 0;
 	int num_patterns = sizeof (pattern) / sizeof (pattern[0]);
 	int i;
@@ -636,9 +634,9 @@ int mem_test_data (void)

 	return 0;
 }
-#endif /* CFG_DRAM_TEST_DATA */
+#endif /* CONFIG_SYS_DRAM_TEST_DATA */

-#if defined (CFG_DRAM_TEST_ADDRESS)
+#if defined (CONFIG_SYS_DRAM_TEST_ADDRESS)
 /*********************************************************************/
 /* NAME:  mem_test_address() -	test address lines		     */
 /*								     */
@@ -663,8 +661,8 @@ int mem_test_data (void)
 int mem_test_address (void)
 {
 	volatile unsigned int *pmem =
-		(volatile unsigned int *) CFG_MEMTEST_START;
-	const unsigned int size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 4;
+		(volatile unsigned int *) CONFIG_SYS_MEMTEST_START;
+	const unsigned int size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 4;
 	unsigned int i;

 	/* write address to each location */
@@ -681,9 +679,9 @@ int mem_test_address (void)
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_ADDRESS */
+#endif /* CONFIG_SYS_DRAM_TEST_ADDRESS */

-#if defined (CFG_DRAM_TEST_WALK)
+#if defined (CONFIG_SYS_DRAM_TEST_WALK)
 /*********************************************************************/
 /* NAME:   mem_march() -  memory march				     */
 /*								     */
@@ -741,7 +739,7 @@ int mem_march (volatile unsigned long long *base,
 	}
 	return 0;
 }
-#endif /* CFG_DRAM_TEST_WALK */
+#endif /* CONFIG_SYS_DRAM_TEST_WALK */

 /*********************************************************************/
 /* NAME:   mem_test_walk() -  a simple walking ones test	     */
@@ -773,8 +771,8 @@ int mem_test_walk (void)
 {
 	unsigned long long mask;
 	volatile unsigned long long *pmem =
-		(volatile unsigned long long *) CFG_MEMTEST_START;
-	const unsigned long size = (CFG_MEMTEST_END - CFG_MEMTEST_START) / 8;
+		(volatile unsigned long long *) CONFIG_SYS_MEMTEST_START;
+	const unsigned long size = (CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START) / 8;

 	unsigned int i;

@@ -850,9 +848,9 @@ int testdram (void)
 /*    runwalk = 0; */

 	if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
-		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CFG_MEMTEST_START, CFG_MEMTEST_END);
+		printf ("Testing RAM from 0x%08x to 0x%08x ...  (don't panic... that will take a moment !!!!)\n", CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END);
 	}
-#ifdef CFG_DRAM_TEST_DATA
+#ifdef CONFIG_SYS_DRAM_TEST_DATA
 	if (rundata == 1) {
 		printf ("Test DATA ...  ");
 		if (mem_test_data () == 1) {
@@ -862,7 +860,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_ADDRESS
+#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
 	if (runaddress == 1) {
 		printf ("Test ADDRESS ...  ");
 		if (mem_test_address () == 1) {
@@ -872,7 +870,7 @@ int testdram (void)
 			printf ("ok \n");
 	}
 #endif
-#ifdef CFG_DRAM_TEST_WALK
+#ifdef CONFIG_SYS_DRAM_TEST_WALK
 	if (runwalk == 1) {
 		printf ("Test WALKING ONEs ...  ");
 		if (mem_test_walk () == 1) {
@@ -888,7 +886,7 @@ int testdram (void)
 	return 0;

 }
-#endif /* CFG_DRAM_TEST */
+#endif /* CONFIG_SYS_DRAM_TEST */

 /* ronen - the below functions are used by the bootm function           */
 /*  - we map the base register to fbe00000 (same mapping as in the LSP) */
@@ -927,10 +925,13 @@ void board_prebootm_init ()
 	GT_REG_WRITE (MV64460_ETH_RECEIVE_QUEUE_COMMAND_REG (2), 0x0000ff00);

 /* Relocate MV64460 internal regs */
-	my_remap_gt_regs_bootm (CFG_GT_REGS, BRIDGE_REG_BASE_BOOTM);
+	my_remap_gt_regs_bootm (CONFIG_SYS_GT_REGS, BRIDGE_REG_BASE_BOOTM);

 	icache_disable ();
-	invalidate_l1_instruction_cache ();
-	flush_data_cache ();
 	dcache_disable ();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -426,7 +426,7 @@ void mpsc_sdma_init (void)
 			  (MV64460_CUNIT_BASE_ADDR_WIN_0_BIT * 2)));

 /* Setup MPSC internal address space base address	*/
-	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CFG_GT_REGS);
+	GT_REG_WRITE (CUNIT_INTERNAL_SPACE_BASE_ADDR_REG, CONFIG_SYS_GT_REGS);

 /* no high address remap*/
 	GT_REG_WRITE (CUNIT_HIGH_ADDR_REMAP_REG0, 0x00);
@@ -516,9 +516,9 @@ int galbrg_set_baudrate (int channel, int rate)

 #ifdef ZUMA_NTL
 	/* from tclk */
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #else
-	clock = (CFG_TCLK / (16 * rate)) - 1;
+	clock = (CONFIG_SYS_TCLK / (16 * rate)) - 1;
 #endif

 	galbrg_set_CDV (channel, clock);	/* set timer Reg. for BRG */
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
@@ -859,14 +859,14 @@ void pci_init_board (void)

 	/* PCI memory space */
 	pci_set_region (pci0_hose.regions + 0,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_0_MEM_SPACE,
-			CFG_PCI0_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_0_MEM_SPACE,
+			CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);

 	/* PCI I/O space */
 	pci_set_region (pci0_hose.regions + 1,
-			CFG_PCI0_IO_SPACE_PCI,
-			CFG_PCI0_IO_SPACE, CFG_PCI0_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI0_IO_SPACE_PCI,
+			CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);

 	pci_set_ops (&pci0_hose,
 		     pci_hose_read_config_byte_via_dword,
@@ -901,14 +901,14 @@ void pci_init_board (void)

 	/* PCI memory space */
 	pci_set_region (pci1_hose.regions + 0,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_0_MEM_SPACE,
-			CFG_PCI1_MEM_SIZE, PCI_REGION_MEM);
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_0_MEM_SPACE,
+			CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);

 	/* PCI I/O space */
 	pci_set_region (pci1_hose.regions + 1,
-			CFG_PCI1_IO_SPACE_PCI,
-			CFG_PCI1_IO_SPACE, CFG_PCI1_IO_SIZE, PCI_REGION_IO);
+			CONFIG_SYS_PCI1_IO_SPACE_PCI,
+			CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);

 	pci_set_ops (&pci1_hose,
 		     pci_hose_read_config_byte_via_dword,
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -312,7 +312,7 @@ return 0;
 	} else
 		dimmInfo->slot = slot;	/* start to fill up dimminfo for this "slot" */

-#ifdef CFG_DISPLAY_DIMM_SPD_CONTENT
+#ifdef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT

 	for (i = 0; i <= 127; i++) {
 		printf ("SPD-EEPROM Byte %3d = %3x (%3d)\n", i, data[i],
@@ -690,16 +690,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     <
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 <
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							dimmInfo->
 								maxClSupported_DDR
@@ -714,16 +714,16 @@ return 0;
 						if ((dimmInfo->
 						     minimumCycleTimeAtMaxCasLatancy_LoP
 						     >
-						     CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						     CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						    ||
 						    ((dimmInfo->
 						      minimumCycleTimeAtMaxCasLatancy_LoP
 						      ==
-						      CFG_DDR_SDRAM_CYCLE_COUNT_LOP)
+						      CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP)
 						     && (dimmInfo->
 							 minimumCycleTimeAtMaxCasLatancy_RoP
 							 >
-							 CFG_DDR_SDRAM_CYCLE_COUNT_ROP)))
+							 CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP)))
 						{
 							printf ("*********************************************************\n");
 							printf ("*** sysClock is higher than SDRAM's allowed frequency ***\n");
@@ -1289,37 +1289,37 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 	case 0x0:
 	case 0x80:		/* refresh period is 15.625 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 15.625 * (float) CFG_BUS_HZ)
+			(unsigned int) (((float) 15.625 * (float) CONFIG_SYS_BUS_HZ)
 					/ (float) 1000000.0);
 		break;
 	case 0x1:
 	case 0x81:		/* refresh period is 3.9 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 3.9 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 3.9 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x2:
 	case 0x82:		/* refresh period is 7.8 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 7.8 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 7.8 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x3:
 	case 0x83:		/* refresh period is 31.3 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 31.3 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 31.3 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x4:
 	case 0x84:		/* refresh period is 62.5 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 62.5 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 62.5 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	case 0x5:
 	case 0x85:		/* refresh period is 125 usec */
 		sdram_config_reg =
-			(unsigned int) (((float) 125 * (float) CFG_BUS_HZ) /
+			(unsigned int) (((float) 125 * (float) CONFIG_SYS_BUS_HZ) /
 					(float) 1000000.0);
 		break;
 	default:		/* refresh period undefined */
@@ -1816,7 +1816,7 @@ phys_size_t initdram (int board_type)

 	printf ("-- DIMM2 has %d banks\n", dimmInfo2.numOfModuleBanks);

-	for (bank_no = 0; bank_no < CFG_DRAM_BANKS; bank_no++) {
+	for (bank_no = 0; bank_no < CONFIG_SYS_DRAM_BANKS; bank_no++) {
 		/* skip over banks that are not populated */
 		if (!checkbank[bank_no])
 			continue;
--- a/board/Marvell/db64460/u-boot.lds
+++ b/board/Marvell/db64460/u-boot.lds
@@ -60,7 +60,7 @@ SECTIONS

 /* store the environment in a seperate sector in the boot flash */
 /*    . = env_offset; */
-/*    common/environment.o(.text) */
+/*    common/env_embedded.o(.text) */

    *(.text)
    *(.fixup)
@@ -131,6 +131,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/MigoR/lowlevel_init.S
+++ b/board/MigoR/lowlevel_init.S
@@ -1,264 +0,0 @@
-/*
- * Copyright (C) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * Copyright (C) 2007
- * Kenati Technologies, Inc.
- *
- * board/MigoR/lowlevel_init.S
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#include <asm/processor.h>
-
-/*
- *  Board specific low level init code, called _very_ early in the
- *  startup sequence. Relocation to SDRAM has not happened yet, no
- *  stack is available, bss section has not been initialised, etc.
- *
- *  (Note: As no stack is available, no subroutines can be called...).
- */
-
-	.global	lowlevel_init
-
-	.text
-	.align	2
-
-lowlevel_init:
-	mov.l	CCR_A, r1	! Address of Cache Control Register
-	mov.l	CCR_D, r0	! Instruction Cache Invalidate
-	mov.l	r0, @r1
-
-	mov.l	MMUCR_A, r1	! Address of MMU Control Register
-	mov.l	MMUCR_D, r0	! TI == TLB Invalidate bit
-	mov.l	r0, @r1
-
-	mov.l	MSTPCR0_A, r1	! Address of Power Control Register 0
-	mov.l	MSTPCR0_D, r0	!
-	mov.l	r0, @r1
-
-	mov.l	MSTPCR2_A, r1	! Address of Power Control Register 2
-	mov.l	MSTPCR2_D, r0	!
-	mov.l	r0, @r1
-
-	mov.l	PFC_PULCR_A, r1
-	mov.w	PFC_PULCR_D, r0
-	mov.w	r0,@r1
-
-	mov.l	PFC_DRVCR_A, r1
-	mov.w	PFC_DRVCR_D, r0
-	mov.w	r0, @r1
-
-	mov.l	SBSCR_A, r1	!
-	mov.w	SBSCR_D, r0	!
-	mov.w	r0, @r1
-
-	mov.l	PSCR_A, r1	!
-	mov.w	PSCR_D, r0	!
-	mov.w	r0, @r1
-
-	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-	mov.w	RWTCSR_D_1, r0	! 0xA507 -> timer_STOP/WDT_CLK=max
-	mov.w	r0, @r1
-
-	mov.l	RWTCNT_A, r1	! 0xA4520000 (Watchdog Count Register)
-	mov.w	RWTCNT_D, r0	! 0x5A00 -> Clear
-	mov.w	r0, @r1
-
-	mov.l	RWTCSR_A, r1	! 0xA4520004 (Watchdog Control / Status Register)
-	mov.w	RWTCSR_D_2, r0	! 0xA504 -> timer_STOP/CLK=500ms
-	mov.w	r0, @r1
-
-	mov.l	DLLFRQ_A, r1	! 20080115
-	mov.l	DLLFRQ_D, r0	! 20080115
-	mov.l	r0, @r1
-
-	mov.l	FRQCR_A, r1		! 0xA4150000 Frequency control register
-	mov.l	FRQCR_D, r0	! 20080115
-	mov.l	r0, @r1
-
-	mov.l	CCR_A, r1		! Address of Cache Control Register
-	mov.l	CCR_D_2, r0	! ??
-	mov.l	r0, @r1
-
-bsc_init:
-	mov.l	CMNCR_A, r1	! CMNCR address -> R1
-	mov.l	CMNCR_D, r0	! CMNCR data    -> R0
-	mov.l	r0, @r1		! CMNCR set
-
-	mov.l	CS0BCR_A, r1	! CS0BCR address -> R1
-	mov.l	CS0BCR_D, r0	! CS0BCR data    -> R0
-	mov.l	r0, @r1		! CS0BCR set
-
-	mov.l	CS4BCR_A, r1	! CS4BCR address -> R1
-	mov.l	CS4BCR_D, r0	! CS4BCR data    -> R0
-	mov.l	r0, @r1		! CS4BCR set
-
-	mov.l	CS5ABCR_A, r1	! CS5ABCR address -> R1
-	mov.l	CS5ABCR_D, r0	! CS5ABCR data    -> R0
-	mov.l	r0, @r1		! CS5ABCR set
-
-	mov.l	CS5BBCR_A, r1	! CS5BBCR address -> R1
-	mov.l	CS5BBCR_D, r0	! CS5BBCR data    -> R0
-	mov.l	r0, @r1		! CS5BBCR set
-
-	mov.l	CS6ABCR_A, r1	! CS6ABCR address -> R1
-	mov.l	CS6ABCR_D, r0	! CS6ABCR data    -> R0
-	mov.l	r0, @r1		! CS6ABCR set
-
-	mov.l	CS0WCR_A, r1	! CS0WCR address -> R1
-	mov.l	CS0WCR_D, r0	! CS0WCR data    -> R0
-	mov.l	r0, @r1		! CS0WCR set
-
-	mov.l	CS4WCR_A, r1	! CS4WCR address -> R1
-	mov.l	CS4WCR_D, r0	! CS4WCR data    -> R0
-	mov.l	r0, @r1		! CS4WCR set
-
-	mov.l	CS5AWCR_A, r1	! CS5AWCR address -> R1
-	mov.l	CS5AWCR_D, r0	! CS5AWCR data    -> R0
-	mov.l	r0, @r1		! CS5AWCR set
-
-	mov.l	CS5BWCR_A, r1	! CS5BWCR address -> R1
-	mov.l	CS5BWCR_D, r0	! CS5BWCR data    -> R0
-	mov.l	r0, @r1		! CS5BWCR set
-
-	mov.l	CS6AWCR_A, r1	! CS6AWCR address -> R1
-	mov.l	CS6AWCR_D, r0	! CS6AWCR data    -> R0
-	mov.l	r0, @r1		! CS6AWCR set
-
-	! SDRAM initialization
-	mov.l	SDCR_A, r1	! SB_SDCR address -> R1
-	mov.l	SDCR_D, r0	! SB_SDCR data    -> R0
-	mov.l	r0, @r1		! SB_SDCR set
-
-	mov.l	SDWCR_A, r1	! SB_SDWCR address -> R1
-	mov.l	SDWCR_D, r0	! SB_SDWCR data    -> R0
-	mov.l	r0, @r1		! SB_SDWCR set
-
-	mov.l	SDPCR_A, r1	! SB_SDPCR address -> R1
-	mov.l	SDPCR_D, r0	! SB_SDPCR data    -> R0
-	mov.l	r0, @r1		! SB_SDPCR set
-
-	mov.l	RTCOR_A, r1	! SB_RTCOR address -> R1
-	mov.l	RTCOR_D, r0	! SB_RTCOR data    -> R0
-	mov.l	r0, @r1		! SB_RTCOR set
-
-	mov.l	RTCNT_A, r1	! SB_RTCNT address -> R1
-	mov.l	RTCNT_D, r0	! SB_RTCNT data    -> R0
-	mov.l	r0, @r1
-
-	mov.l	RTCSR_A, r1	! SB_RTCSR address -> R1
-	mov.l	RTCSR_D, r0	! SB_RTCSR data    -> R0
-	mov.l	r0, @r1		! SB_RTCSR set
-
-	mov.l	RFCR_A, r1	! SB_RFCR address -> R1
-	mov.l	RFCR_D, r0	! SB_RFCR data    -> R0
-	mov.l	r0, @r1
-
-	mov.l	SDMR3_A, r1	! SDMR3 address -> R1
-	mov	#0x00, r0	! SDMR3 data    -> R0
-	mov.b	r0, @r1		! SDMR3 set
-
-	! BL bit off (init = ON)  (?!?)
-
-	stc	sr, r0				! BL bit off(init=ON)
-	mov.l	SR_MASK_D, r1
-	and	r1, r0
-	ldc	r0, sr
-
-	rts
-	mov	#0, r0
-
-	.align	4
-
-CCR_A:		.long	CCR
-MMUCR_A:	.long	MMUCR
-MSTPCR0_A:	.long	MSTPCR0
-MSTPCR2_A:	.long	MSTPCR2
-PFC_PULCR_A:	.long	PULCR
-PFC_DRVCR_A:	.long	DRVCR
-SBSCR_A:	.long	SBSCR
-PSCR_A:		.long	PSCR
-RWTCSR_A:	.long	RWTCSR
-RWTCNT_A:	.long	RWTCNT
-FRQCR_A:	.long	FRQCR
-PLLCR_A:	.long	PLLCR
-DLLFRQ_A:	.long	DLLFRQ
-
-CCR_D:		.long	0x00000800
-CCR_D_2:	.long	0x00000103
-MMUCR_D:	.long	0x00000004
-MSTPCR0_D:	.long	0x00001001
-MSTPCR2_D:	.long	0xffffffff
-PFC_PULCR_D:	.long	0x6000
-PFC_DRVCR_D:	.long	0x0464
-FRQCR_D:	.long	0x07033639
-PLLCR_D:	.long	0x00005000
-DLLFRQ_D:	.long	0x000004F6	! 20080115
-
-CMNCR_A:	.long	CMNCR
-CMNCR_D:	.long	0x0000001B	! 20080115
-CS0BCR_A:	.long	CS0BCR		! Flash bank 1
-CS0BCR_D:	.long	0x24920400
-CS4BCR_A:	.long	CS4BCR		!
-CS4BCR_D:	.long	0x10003400	! 20080115
-CS5ABCR_A:	.long	CS5ABCR		!
-CS5ABCR_D:	.long	0x24920400
-CS5BBCR_A:	.long	CS5BBCR		!
-CS5BBCR_D:	.long	0x24920400
-CS6ABCR_A:	.long	CS6ABCR		!
-CS6ABCR_D:	.long	0x24920400
-
-CS0WCR_A:	.long	CS0WCR
-CS0WCR_D:	.long	0x00000380
-CS4WCR_A:	.long	CS4WCR
-CS4WCR_D:	.long	0x00100A81	! 20080115
-CS5AWCR_A:	.long	CS5AWCR
-CS5AWCR_D:	.long	0x00000300
-CS5BWCR_A:	.long	CS5BWCR
-CS5BWCR_D:	.long	0x00000300
-CS6AWCR_A:	.long	CS6AWCR
-CS6AWCR_D:	.long	0x00000300
-
-SDCR_A:		.long	SBSC_SDCR
-SDCR_D:		.long	0x80160809	! 20080115
-SDWCR_A:	.long	SBSC_SDWCR
-SDWCR_D:	.long	0x0014450C	! 20080115
-SDPCR_A:	.long	SBSC_SDPCR
-SDPCR_D:	.long	0x00000087
-RTCOR_A:	.long	SBSC_RTCOR
-RTCNT_A:	.long	SBSC_RTCNT
-RTCNT_D:	.long	0xA55A0012
-RTCOR_D:	.long	0xA55A001C	! 20080115
-RTCSR_A:	.long	SBSC_RTCSR
-RFCR_A:		.long	SBSC_RFCR
-RFCR_D:		.long	0xA55A0221
-RTCSR_D:	.long	0xA55A009a	! 20080115
-SDMR3_A:	.long	0xFE581180	! 20080115
-
-SR_MASK_D:	.long	0xEFFFFF0F
-
-	.align	2
-
-SBSCR_D:	.word	0x0044
-PSCR_D:		.word	0x0000
-RWTCSR_D_1:	.word	0xA507
-RWTCSR_D_2:	.word	0xA504		! 20080115
-RWTCNT_D:	.word	0x5A00
--- a/board/RPXClassic/RPXClassic.c
+++ b/board/RPXClassic/RPXClassic.c
@@ -111,7 +111,7 @@ void board_get_enetaddr (uchar * enet)
 	char buff[256], *cp;

 	/* Initialize I2C					*/
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);

 	/* Read 256 bytes in EEPROM				*/
 	i2c_read (0x54, 0, 1, (uchar *)buff, 128);
@@ -167,7 +167,7 @@ void rpxclassic_init (void)

 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size10;

@@ -175,15 +175,15 @@ phys_size_t initdram (int board_type)
 			   sizeof (sdram_table) / sizeof (uint));

 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;

 	memctl->memc_mar = 0x00000000;

 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;

-	memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */

 	udelay (200);

@@ -200,7 +200,7 @@ phys_size_t initdram (int board_type)
 	 * try 10 column mode
 	 */

-	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE_PRELIM,
+	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
 						SDRAM_MAX_SIZE);

 	return (size10);
@@ -218,7 +218,7 @@ phys_size_t initdram (int board_type)

 static long int dram_size (long int mamr_value, long int *base, long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;

 	memctl->memc_mamr = mamr_value;
--- a/board/RPXClassic/eccx.c
+++ b/board/RPXClassic/eccx.c
@@ -299,7 +299,7 @@ void video_get_info_str (int line_number, char *info)
 */
 unsigned int board_video_init (void)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
    volatile memctl8xx_t *memctl = &immap->im_memctl;

    /* Program ECCX registers                                                */
--- a/board/RPXClassic/flash.c
+++ b/board/RPXClassic/flash.c
@@ -33,7 +33,7 @@
 #include <common.h>
 #include <mpc8xx.h>

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

 /*-----------------------------------------------------------------------
 * Functions
@@ -51,20 +51,20 @@ unsigned long flash_init (void)
 	int i;

 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}

-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);


-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);

-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif

@@ -313,7 +313,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -436,7 +436,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
--- a/board/RPXClassic/u-boot.lds
+++ b/board/RPXClassic/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
    . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/RPXClassic/u-boot.lds.debug
+++ b/board/RPXClassic/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
    lib_generic/crc32.o		(.text)

    . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
--- a/board/RPXlite/RPXlite.c
+++ b/board/RPXlite/RPXlite.c
@@ -104,7 +104,7 @@ int checkboard (void)

 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size10;

@@ -112,15 +112,15 @@ phys_size_t initdram (int board_type)
 		   sizeof (sdram_table) / sizeof (uint));

 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;

 	memctl->memc_mar = 0x00000000;

 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;

-	memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */

 	udelay (200);

@@ -137,7 +137,7 @@ phys_size_t initdram (int board_type)
 	 * try 10 column mode
 	 */

-	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE_PRELIM,
+	size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
 			    SDRAM_MAX_SIZE);

 	return (size10);
@@ -156,7 +156,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;

 	memctl->memc_mamr = mamr_value;
--- a/board/RPXlite/flash.c
+++ b/board/RPXlite/flash.c
@@ -38,7 +38,7 @@
 #include <common.h>
 #include <mpc8xx.h>

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

 /*-----------------------------------------------------------------------
 * Functions
@@ -52,13 +52,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);

 unsigned long flash_init (void)
 {
-/*	volatile immap_t     *immap  = (immap_t *)CFG_IMMR; */
+/*	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR; */
 /*	volatile memctl8xx_t *memctl = &immap->im_memctl; */
 	unsigned long size_b0 ;
 	int i;

 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}

@@ -73,19 +73,19 @@ unsigned long flash_init (void)
 */
 	/* Remap FLASH according to real size */
 /*%%%
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
 %%%*/
 	/* Re-do sizing to get full correct info */

-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);

-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif

@@ -390,7 +390,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -513,7 +513,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
--- a/board/RPXlite/u-boot.lds
+++ b/board/RPXlite/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
    . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/RPXlite/u-boot.lds.debug
+++ b/board/RPXlite/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
    lib_generic/crc32.o		(.text)

    . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
--- a/board/RPXlite_dw/README
+++ b/board/RPXlite_dw/README
@@ -21,7 +21,7 @@ make distclean
 make RPXlite_DW_64_config
 make all

-2. CFG_ENV_IS_IN_FLASH/CFG_ENV_IS_IN_NVRAM
+2. CONFIG_ENV_IS_IN_FLASH/CONFIG_ENV_IS_IN_NVRAM

 The default environment parameter is stored in FLASH because it is a common choice for
 environment parameter.So I make NVRAM as backup parameter storeage.The reason why I
--- a/board/RPXlite_dw/RPXlite_dw.c
+++ b/board/RPXlite_dw/RPXlite_dw.c
@@ -106,22 +106,22 @@ int checkboard (void)

 phys_size_t initdram (int board_type)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	long int size9;

 	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));

 	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CFG_MPTPR ;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR ;

 	memctl->memc_mar  = 0x00000088;

 	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CFG_OR1_PRELIM;
-	memctl->memc_br1 = CFG_BR1_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;

-	memctl->memc_mamr = CFG_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
 	/*Disable Periodic timer A. */

 	udelay(200);
@@ -142,13 +142,13 @@ phys_size_t initdram (int board_type)
 	  * try 9 column mode
 	  */

-	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);

 	/*
 	 * Final mapping:
 	 */

-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;

 	udelay (1000);

@@ -171,7 +171,7 @@ void rpxlite_init (void)
 static long int dram_size (long int mamr_value, long int *base,
 			   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;

 	memctl->memc_mamr = mamr_value;
--- a/board/RPXlite_dw/flash.c
+++ b/board/RPXlite_dw/flash.c
@@ -49,7 +49,7 @@
 #include <common.h>
 #include <mpc8xx.h>

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

 /*-----------------------------------------------------------------------
 * Functions   vu_long : volatile unsigned long IN include/common.h
@@ -64,22 +64,22 @@ unsigned long flash_init (void)
 	int i;

 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}

-	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);

-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* If Monitor is in the cope of FLASH,then
 	 * protect this area by default in case for
 	 * other occupation. [SAM] */

 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
 		      &flash_info[0]);
 #endif
 	flash_info[0].size = size_b0;
@@ -360,7 +360,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long *)(info->start[l_sect]);
 	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			printf ("Timeout\n");
 			return 1;
 		}
@@ -482,7 +482,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
--- a/board/RPXlite_dw/u-boot.lds
+++ b/board/RPXlite_dw/u-boot.lds
@@ -64,7 +64,7 @@ SECTIONS
 /* XXX ?
    . = env_offset;
 */
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
@@ -135,6 +135,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ b/board/RPXlite_dw/u-boot.lds.debug
@@ -61,7 +61,7 @@ SECTIONS
    lib_generic/crc32.o		(.text)

    . = env_offset;
-    common/environment.o(.text)
+    common/env_embedded.o(.text)

    *(.text)
    *(.fixup)
--- a/board/RRvision/RRvision.c
+++ b/board/RRvision/RRvision.c
@@ -112,7 +112,7 @@ int checkboard (void)

 phys_size_t initdram (int board_type)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long reg;
 	long int size8, size9;
@@ -126,17 +126,17 @@ phys_size_t initdram (int board_type)
 	 * with two SDRAM banks or four cycles every 31.2 us with one
 	 * bank. It will be adjusted after memory sizing.
 	 */
-	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;

 	memctl->memc_mar = 0x00000088;

 	/*
 	 * Map controller bank 1 the SDRAM bank 2 at physical address 0.
 	 */
-	memctl->memc_or1 = CFG_OR2_PRELIM;
-	memctl->memc_br1 = CFG_BR2_PRELIM;
+	memctl->memc_or1 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR2_PRELIM;

-	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */

 	udelay (200);

@@ -156,7 +156,7 @@ phys_size_t initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL,
+	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);

@@ -165,7 +165,7 @@ phys_size_t initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL,
+	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
 			   SDRAM_BASE2_PRELIM,
 			   SDRAM_MAX_SIZE);

@@ -174,7 +174,7 @@ phys_size_t initdram (int board_type)
 /*		debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
 	} else {			/* back to 8 columns            */
 		size = size8;
-		memctl->memc_mamr = CFG_MAMR_8COL;
+		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
 		udelay (500);
 /*		debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
 	}
@@ -187,15 +187,15 @@ phys_size_t initdram (int board_type)
 	 */
 	if (size < 0x02000000) {
 		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
 		udelay (1000);
 	}

 	/*
 	 * Final mapping
 	 */
-	memctl->memc_or1 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
-	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+	memctl->memc_or1 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+	memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;

 	/*
 	 * No bank 1
@@ -206,7 +206,7 @@ phys_size_t initdram (int board_type)

 	/* adjust refresh rate depending on SDRAM type, one bank */
 	reg = memctl->memc_mptpr;
-	reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+	reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
 	memctl->memc_mptpr = reg;

 	udelay (10000);
@@ -227,7 +227,7 @@ phys_size_t initdram (int board_type)
 static long int dram_size (long int mamr_value, long int *base,
 						   long int maxsize)
 {
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;

 	memctl->memc_mamr = mamr_value;
--- a/board/RRvision/flash.c
+++ b/board/RRvision/flash.c
@@ -26,11 +26,11 @@
 #include <common.h>
 #include <mpc8xx.h>

-#ifndef	CFG_ENV_ADDR
-#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#ifndef	CONFIG_ENV_ADDR
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 #endif

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

 /*-----------------------------------------------------------------------
 * Functions
@@ -43,13 +43,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);

 unsigned long flash_init (void)
 {
-	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	unsigned long size;
 	int i;

 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 	}

@@ -63,25 +63,25 @@ unsigned long flash_init (void)
 	}

 	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size & OR_AM_MSK);
-	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & OR_AM_MSK);
+	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;

 	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);

-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
 		      &flash_info[0]);
 #endif

-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
 		      &flash_info[0]);
 #endif

@@ -388,7 +388,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	last  = start;
 	addr = (vu_long*)(info->start[l_sect]);
 	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 			puts ("Timeout\n");
 			return 1;
 		}
@@ -511,7 +511,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 	/* data polling for D7 */
 	start = get_timer (0);
 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			return (1);
 		}
 	}
--- a/board/RRvision/u-boot.lds
+++ b/board/RRvision/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
    lib_ppc/time.o		(.text)

    . = env_offset;
-    common/environment.o	(.ppcenv)
+    common/env_embedded.o	(.ppcenv)

    *(.text)
    *(.fixup)
@@ -137,6 +137,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>

 int checkboard (void)
 {
@@ -45,7 +46,7 @@ phys_size_t initdram (int board_type)
 	long mear1;
 	long emear1;

-	size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
+	size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);

 	new_bank0_end = size - 1;
 	mear1 = mpc824x_mpc107_getreg(MEAR1);
@@ -109,3 +110,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
--- a/board/a3000/flash.c
+++ b/board/a3000/flash.c
@@ -25,15 +25,15 @@
 #include <common.h>
 #include <mpc824x.h>

-#if defined(CFG_ENV_IS_IN_FLASH)
-# ifndef  CFG_ENV_ADDR
-#  define CFG_ENV_ADDR  (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
 # endif
-# ifndef  CFG_ENV_SIZE
-#  define CFG_ENV_SIZE  CFG_ENV_SECT_SIZE
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
 # endif
-# ifndef  CFG_ENV_SECT_SIZE
-#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
 # endif
 #endif

@@ -48,7 +48,7 @@
 #endif
 /*---------------------------------------------------------------------*/

-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

 /*-----------------------------------------------------------------------
 * Functions
@@ -65,13 +65,13 @@ static void flash_get_offsets (ulong base, flash_info_t *info);

 unsigned long flash_init (void)
 {
-	unsigned long flash_banks[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS;
-	unsigned long size, size_b[CFG_MAX_FLASH_BANKS];
+	unsigned long flash_banks[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS;
+	unsigned long size, size_b[CONFIG_SYS_MAX_FLASH_BANKS];

 	int i;

 	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	{
 		flash_info[i].flash_id = FLASH_UNKNOWN;

@@ -99,27 +99,27 @@ unsigned long flash_init (void)
 	}


-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	DEBUGF("protect monitor %x @ %x\n", CFG_MONITOR_BASE, CFG_MONITOR_LEN);
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+	DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN);
 	/* monitor protection ON by default */
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      CONFIG_SYS_MONITOR_BASE,
+		      CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
 		      &flash_info[0]);
 #endif

-#ifdef	CFG_ENV_IS_IN_FLASH
+#ifdef	CONFIG_ENV_IS_IN_FLASH
 	/* ENV protection ON by default */
-	DEBUGF("protect environtment %x @ %x\n", CFG_ENV_ADDR, CFG_ENV_SECT_SIZE);
+	DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
 	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      CONFIG_ENV_ADDR,
+		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 		      &flash_info[0]);
 #endif

 	size = 0;
 	DEBUGF("## Final Flash bank sizes: ");
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
 	{
 		DEBUGF("%08lx ", size_b[i]);
 		size += size_b[i];
@@ -285,10 +285,10 @@ static ulong flash_get_size (vu_char *addr, flash_info_t *info)

 	}

-	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CFG_MAX_FLASH_SECT);
-		info->sector_count = CFG_MAX_FLASH_SECT;
+			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 	}

 	addr[0] = BS(0xFF);		/* restore read mode */
@@ -356,7 +356,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 			udelay (1000);

 			while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					*addr = BS(0xB0); /* suspend erase	  */
 					*addr = BS(0xFF); /* reset to read mode */
@@ -439,7 +439,7 @@ static int write_data (flash_info_t *info, uchar *dest, uchar data)
 	start = get_timer (0);

 	while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 			*addr = BS(0xFF);	/* restore read mode */
 			return 1;
 		}
--- a/board/actux1/actux1.c
+++ b/board/actux1/actux1.c
@@ -49,16 +49,16 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);

 	/* Setup GPIO's for PCI INTA */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI1_INTA);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI1_INTA);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI1_INTA);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI1_INTA);

 	/* Setup GPIO's for 33MHz clock output */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
 	*IXP425_GPIO_GPCLKR = 0x011001FF;

 	/* CS5: Debug port */
@@ -69,7 +69,7 @@ int board_init (void)
 	*IXP425_EXP_CS7 = 0x80900003;

 	udelay (533);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);

 	ACTUX1_LED1 (2);
 	ACTUX1_LED2 (2);
--- a/board/actux1/actux1_hw.h
+++ b/board/actux1/actux1_hw.h
@@ -42,16 +42,16 @@
 #define ACTUX1_BOARDREL	(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)

 /* GPIO settings */
-#define CFG_GPIO_PCI1_INTA		2
-#define CFG_GPIO_PCI2_INTA		3
-#define CFG_GPIO_I2C_SDA		4
-#define CFG_GPIO_I2C_SCL		5
-#define CFG_GPIO_DBGJUMPER		9
-#define CFG_GPIO_BUTTON1		10
-#define CFG_GPIO_DBGSENSE		11
-#define CFG_GPIO_DTR			12
-#define CFG_GPIO_IORST			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_PCI1_INTA		2
+#define CONFIG_SYS_GPIO_PCI2_INTA		3
+#define CONFIG_SYS_GPIO_I2C_SDA		4
+#define CONFIG_SYS_GPIO_I2C_SCL		5
+#define CONFIG_SYS_GPIO_DBGJUMPER		9
+#define CONFIG_SYS_GPIO_BUTTON1		10
+#define CONFIG_SYS_GPIO_DBGSENSE		11
+#define CONFIG_SYS_GPIO_DTR			12
+#define CONFIG_SYS_GPIO_IORST			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */

 #endif
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -37,7 +37,7 @@ SECTIONS
 		common/dlmalloc.o(.text)
 		cpu/ixp/cpu.o(.text)
 		. = env_offset;
-		common/environment.o(.ppcenv)
+		common/env_embedded.o(.ppcenv)
 		* (.text)
 	}

@@ -64,6 +64,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
--- a/board/actux2/actux2.c
+++ b/board/actux2/actux2.c
@@ -50,24 +50,24 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;

-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
-	GPIO_OUTPUT_SET (CFG_GPIO_DCD);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);

 	/* Setup GPIO's for Interrupt inputs */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);

 	/* Setup GPIO's for 33MHz clock output */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
 	*IXP425_GPIO_GPCLKR = 0x011001FF;

 	/* CS1: IPAC-X */
@@ -80,8 +80,8 @@ int board_init (void)
 	*IXP425_EXP_CS7 = 0x80900003;

 	udelay (533);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
-	GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);

 	ACTUX2_LED1 (1);
 	ACTUX2_LED2 (0);
--- a/board/actux2/actux2_hw.h
+++ b/board/actux2/actux2_hw.h
@@ -39,21 +39,21 @@
 /*
 * GPIO settings
 */
-#define CFG_GPIO_DBGINT			0
-#define CFG_GPIO_ETHINT			1
-#define CFG_GPIO_ETHRST			2	/* Out */
-#define CFG_GPIO_LED5_GN		3	/* Out */
-#define CFG_GPIO_UNUSED4		4
-#define CFG_GPIO_UNUSED5		5
-#define CFG_GPIO_DSR			6	/* Out */
-#define CFG_GPIO_DCD			7	/* Out */
-#define CFG_GPIO_IPAC_INT		8
-#define CFG_GPIO_DBGJUMPER		9
-#define CFG_GPIO_BUTTON1		10
-#define CFG_GPIO_DBGSENSE		11
-#define CFG_GPIO_DTR			12
-#define CFG_GPIO_IORST			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_DBGINT			0
+#define CONFIG_SYS_GPIO_ETHINT			1
+#define CONFIG_SYS_GPIO_ETHRST			2	/* Out */
+#define CONFIG_SYS_GPIO_LED5_GN		3	/* Out */
+#define CONFIG_SYS_GPIO_UNUSED4		4
+#define CONFIG_SYS_GPIO_UNUSED5		5
+#define CONFIG_SYS_GPIO_DSR			6	/* Out */
+#define CONFIG_SYS_GPIO_DCD			7	/* Out */
+#define CONFIG_SYS_GPIO_IPAC_INT		8
+#define CONFIG_SYS_GPIO_DBGJUMPER		9
+#define CONFIG_SYS_GPIO_BUTTON1		10
+#define CONFIG_SYS_GPIO_DBGSENSE		11
+#define CONFIG_SYS_GPIO_DTR			12
+#define CONFIG_SYS_GPIO_IORST			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */

 #endif
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -38,7 +38,7 @@ SECTIONS
 		cpu/ixp/cpu.o(.text)

 		. = env_offset;
-		common/environment.o (.ppcenv)
+		common/env_embedded.o (.ppcenv)

 		* (.text)
 	}
@@ -69,6 +69,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
--- a/board/actux3/actux3.c
+++ b/board/actux3/actux3.c
@@ -50,35 +50,35 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;

-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_ETHRST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DSR);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_DCD);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED5_GN);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED6_RT);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED6_GN);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED5_GN);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_RT);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_GN);

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_DSR);
-	GPIO_OUTPUT_SET (CFG_GPIO_DCD);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_LED5_GN);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_LED6_RT);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_LED6_GN);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED5_GN);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_RT);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_GN);

 	/*
 	 * Setup GPIO's for Interrupt inputs
 	 */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_DBGINT);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_ETHINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);

 	/*
 	 * Setup GPIO's for 33MHz clock output
 	 */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
 	*IXP425_GPIO_GPCLKR = 0x011001FF;

 	/* CS1: IPAC-X */
@@ -91,8 +91,8 @@ int board_init (void)
 	*IXP425_EXP_CS7 = 0x80900003;

 	udelay (533);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
-	GPIO_OUTPUT_SET (CFG_GPIO_ETHRST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);

 	ACTUX3_LED1_RT (1);
 	ACTUX3_LED1_GN (0);
--- a/board/actux3/actux3_hw.h
+++ b/board/actux3/actux3_hw.h
@@ -41,20 +41,20 @@
 #define ACTUX3_OPTION		(readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0)

 /* GPIO settings */
-#define CFG_GPIO_DBGINT			0
-#define CFG_GPIO_ETHINT			1
-#define CFG_GPIO_ETHRST			2	/* Out */
-#define CFG_GPIO_LED5_GN		3	/* Out */
-#define CFG_GPIO_LED6_RT		4	/* Out */
-#define CFG_GPIO_LED6_GN		5	/* Out */
-#define CFG_GPIO_DSR			6	/* Out */
-#define CFG_GPIO_DCD			7	/* Out */
-#define CFG_GPIO_DBGJUMPER		9
-#define CFG_GPIO_BUTTON1		10
-#define CFG_GPIO_DBGSENSE		11
-#define CFG_GPIO_DTR			12
-#define CFG_GPIO_IORST			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_DBGINT			0
+#define CONFIG_SYS_GPIO_ETHINT			1
+#define CONFIG_SYS_GPIO_ETHRST			2	/* Out */
+#define CONFIG_SYS_GPIO_LED5_GN		3	/* Out */
+#define CONFIG_SYS_GPIO_LED6_RT		4	/* Out */
+#define CONFIG_SYS_GPIO_LED6_GN		5	/* Out */
+#define CONFIG_SYS_GPIO_DSR			6	/* Out */
+#define CONFIG_SYS_GPIO_DCD			7	/* Out */
+#define CONFIG_SYS_GPIO_DBGJUMPER		9
+#define CONFIG_SYS_GPIO_BUTTON1		10
+#define CONFIG_SYS_GPIO_DBGSENSE		11
+#define CONFIG_SYS_GPIO_DTR			12
+#define CONFIG_SYS_GPIO_IORST			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */

 #endif
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -38,7 +38,7 @@ SECTIONS
 		cpu/ixp/cpu.o (.text)

 		. = env_offset;
-		common/environment.o (.ppcenv)
+		common/env_embedded.o (.ppcenv)

 		* (.text)
 	}
@@ -69,6 +69,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
--- a/board/actux4/actux4.c
+++ b/board/actux4/actux4.c
@@ -49,53 +49,53 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0x00000100;

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_nPWRON);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_nPWRON);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_nPWRON);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_nPWRON);

-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);

 	/* led not populated on board*/
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED3);
-	GPIO_OUTPUT_SET (CFG_GPIO_LED3);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED3);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED3);

 	/* middle LED */
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_LED2);
-	GPIO_OUTPUT_SET (CFG_GPIO_LED2);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED2);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED2);

 	/* right LED */
 	/* weak pulldown = LED weak on */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_LED1);
-	GPIO_OUTPUT_SET (CFG_GPIO_LED1);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_LED1);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_LED1);

 	/* Setup GPIO's for Interrupt inputs */
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTA);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTB);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_USBINTC);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_RTCINT);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI_INTA);
-	GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI_INTB);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTA);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTB);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_USBINTC);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_RTCINT);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTA);
+	GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_PCI_INTB);

-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTA);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTB);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_USBINTC);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_RTCINT);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI_INTA);
-	GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI_INTB);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTA);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTB);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_USBINTC);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_RTCINT);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTA);
+	GPIO_INT_ACT_LOW_SET (CONFIG_SYS_GPIO_PCI_INTB);

 	/* Setup GPIO's for 33MHz clock output */
 	*IXP425_GPIO_GPCLKR = 0x011001FF;
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK);
-	GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
+	GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);

 	*IXP425_EXP_CS1 = 0xbd113c42;

 	udelay (10000);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
 	udelay (10000);
-	GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST);
+	GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
 	udelay (10000);
-	GPIO_OUTPUT_SET (CFG_GPIO_IORST);
+	GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);

 	return 0;
 }
--- a/board/actux4/actux4_hw.h
+++ b/board/actux4/actux4_hw.h
@@ -29,21 +29,21 @@
 /*
 * GPIO settings
 */
-#define CFG_GPIO_USBINTA		0
-#define CFG_GPIO_USBINTB		1
-#define CFG_GPIO_USBINTC		2
-#define CFG_GPIO_nPWRON			3	/* Out */
-#define CFG_GPIO_I2C_SCL		4
-#define CFG_GPIO_I2C_SDA		5
-#define CFG_GPIO_PCI_INTB		6
-#define CFG_GPIO_BUTTON1		7
-#define CFG_GPIO_LED1			8	/* Out */
-#define CFG_GPIO_RTCINT			9
-#define CFG_GPIO_LED2			10	/* Out */
-#define CFG_GPIO_PCI_INTA		11
-#define CFG_GPIO_IORST			12	/* Out */
-#define CFG_GPIO_LED3			13	/* Out */
-#define CFG_GPIO_PCI_CLK		14	/* Out */
-#define CFG_GPIO_EXTBUS_CLK		15	/* Out */
+#define CONFIG_SYS_GPIO_USBINTA		0
+#define CONFIG_SYS_GPIO_USBINTB		1
+#define CONFIG_SYS_GPIO_USBINTC		2
+#define CONFIG_SYS_GPIO_nPWRON			3	/* Out */
+#define CONFIG_SYS_GPIO_I2C_SCL		4
+#define CONFIG_SYS_GPIO_I2C_SDA		5
+#define CONFIG_SYS_GPIO_PCI_INTB		6
+#define CONFIG_SYS_GPIO_BUTTON1		7
+#define CONFIG_SYS_GPIO_LED1			8	/* Out */
+#define CONFIG_SYS_GPIO_RTCINT			9
+#define CONFIG_SYS_GPIO_LED2			10	/* Out */
+#define CONFIG_SYS_GPIO_PCI_INTA		11
+#define CONFIG_SYS_GPIO_IORST			12	/* Out */
+#define CONFIG_SYS_GPIO_LED3			13	/* Out */
+#define CONFIG_SYS_GPIO_PCI_CLK		14	/* Out */
+#define CONFIG_SYS_GPIO_EXTBUS_CLK		15	/* Out */

 #endif
--- a/board/actux4/u-boot.lds
+++ b/board/actux4/u-boot.lds
@@ -60,6 +60,7 @@ SECTIONS
 	__bss_start =.;
 	.bss (NOLOAD): {
 		*(.bss)
+		. = ALIGN(4);
 	}
 	_end =.;
 }
--- a/board/adder/adder.c
+++ b/board/adder/adder.c
@@ -68,7 +68,7 @@ static uint sdram_table[] = {
 phys_size_t initdram (int board_type)
 {
 	long int msize;
-	volatile immap_t     *immap  = (volatile immap_t *)CFG_IMMR;
+	volatile immap_t     *immap  = (volatile immap_t *)CONFIG_SYS_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;

 	upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
@@ -76,7 +76,7 @@ phys_size_t initdram (int board_type)
 	/* Configure SDRAM refresh */
 	memctl->memc_mptpr = MPTPR_PTP_DIV32; /* BRGCLK/32 */

-	memctl->memc_mamr = (94 << 24) | CFG_MAMR; /* No refresh */
+	memctl->memc_mamr = (94 << 24) | CONFIG_SYS_MAMR; /* No refresh */
 	udelay(200);

 	/* Run precharge from location 0x15 */
@@ -94,10 +94,10 @@ phys_size_t initdram (int board_type)
 	udelay(200);

 	memctl->memc_mamr |=  MAMR_PTAE; /* Enable refresh */
-	memctl->memc_or1   = ~(CFG_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
-	memctl->memc_br1   =  CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
+	memctl->memc_or1   = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
+	memctl->memc_br1   =  CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;

-	msize = get_ram_size(CFG_SDRAM_BASE, CFG_SDRAM_MAX_SIZE);
+	msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
 	memctl->memc_or1  |= ~(msize - 1);

 	return msize;
--- a/board/adder/u-boot.lds
+++ b/board/adder/u-boot.lds
@@ -118,6 +118,7 @@ SECTIONS
   *(.dynbss)
   *(.bss)
   *(COMMON)
+   . = ALIGN(4);
  }
  _end = . ;
  PROVIDE (end = .);
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -25,11 +25,14 @@
 #include <mpc512x.h>
 #include <asm/bitops.h>
 #include <command.h>
+#include <asm/processor.h>
 #include <fdt_support.h>
 #ifdef CONFIG_MISC_INIT_R
 #include <i2c.h>
 #endif

+DECLARE_GLOBAL_DATA_PTR;
+
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
 			 CLOCK_SCCR1_LPC_EN |				\
@@ -37,6 +40,7 @@
 			 CLOCK_SCCR1_PSCFIFO_EN |			\
 			 CLOCK_SCCR1_DDR_EN |				\
 			 CLOCK_SCCR1_FEC_EN |				\
+			 CLOCK_SCCR1_PATA_EN |				\
 			 CLOCK_SCCR1_PCI_EN |				\
 			 CLOCK_SCCR1_TPR_EN)

@@ -52,16 +56,16 @@ long int fixed_sdram(void);

 int board_early_init_f (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
 	u32 lpcaw;

 	/*
 	 * Initialize Local Window for the CPLD registers access (CS2 selects
 	 * the CPLD chip)
 	 */
-	im->sysconf.lpcs2aw = CSAW_START(CFG_CPLD_BASE) |
-			      CSAW_STOP(CFG_CPLD_BASE, CFG_CPLD_SIZE);
-	im->lpc.cs_cfg[2] = CFG_CS2_CFG;
+	im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) |
+			      CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE);
+	im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG;

 	/*
 	 * According to MPC5121e RM, configuring local access windows should
@@ -79,24 +83,30 @@ int board_early_init_f (void)
 	 */

 #ifdef CONFIG_ADS5121_REV2
-	*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+	*((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
 #else
-	if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) {
-		*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+	if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
+		*((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1;
 	} else {
 		/* running from Backup flash */
-		*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32;
+		*((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32;
 	}
 #endif
 	/*
 	 * Configure Flash Speed
 	 */
-	*((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG;
+	*((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG;
+	if (SVR_MJREV (im->sysconf.spridr) >= 2) {
+		*((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING;
+	}
 	/*
 	 * Enable clocks
 	 */
 	im->clk.sccr[0] = SCCR1_CLOCKS_EN;
 	im->clk.sccr[1] = SCCR2_CLOCKS_EN;
+#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+	im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN;
+#endif

 	return 0;
 }
@@ -116,8 +126,8 @@ phys_size_t initdram (int board_type)
 */
 long int fixed_sdram (void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMR;
-	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2 (msize);
 	u32 i;

@@ -125,7 +135,7 @@ long int fixed_sdram (void)
 	im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;

 	/* Initialize DDR Local Window */
-	im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
+	im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000;
 	im->sysconf.ddrlaw.ar = msize_log2 - 1;

 	/*
@@ -137,68 +147,68 @@ long int fixed_sdram (void)
 	__asm__ __volatile__ ("isync");

 	/* Enable DDR */
-	im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_EN;
+	im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN;

 	/* Initialize DDR Priority Manager */
-	im->mddrc.prioman_config1 = CFG_MDDRCGRP_PM_CFG1;
-	im->mddrc.prioman_config2 = CFG_MDDRCGRP_PM_CFG2;
-	im->mddrc.hiprio_config = CFG_MDDRCGRP_HIPRIO_CFG;
-	im->mddrc.lut_table0_main_upper = CFG_MDDRCGRP_LUT0_MU;
-	im->mddrc.lut_table0_main_lower = CFG_MDDRCGRP_LUT0_ML;
-	im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU;
-	im->mddrc.lut_table1_main_lower = CFG_MDDRCGRP_LUT1_ML;
-	im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU;
-	im->mddrc.lut_table2_main_lower = CFG_MDDRCGRP_LUT2_ML;
-	im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU;
-	im->mddrc.lut_table3_main_lower = CFG_MDDRCGRP_LUT3_ML;
-	im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU;
-	im->mddrc.lut_table4_main_lower = CFG_MDDRCGRP_LUT4_ML;
-	im->mddrc.lut_table0_alternate_upper = CFG_MDDRCGRP_LUT0_AU;
-	im->mddrc.lut_table0_alternate_lower = CFG_MDDRCGRP_LUT0_AL;
-	im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU;
-	im->mddrc.lut_table1_alternate_lower = CFG_MDDRCGRP_LUT1_AL;
-	im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU;
-	im->mddrc.lut_table2_alternate_lower = CFG_MDDRCGRP_LUT2_AL;
-	im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU;
-	im->mddrc.lut_table3_alternate_lower = CFG_MDDRCGRP_LUT3_AL;
-	im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU;
-	im->mddrc.lut_table4_alternate_lower = CFG_MDDRCGRP_LUT4_AL;
+	im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1;
+	im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2;
+	im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG;
+	im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU;
+	im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML;
+	im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU;
+	im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML;
+	im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU;
+	im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML;
+	im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU;
+	im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML;
+	im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU;
+	im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML;
+	im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU;
+	im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL;
+	im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU;
+	im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL;
+	im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU;
+	im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL;
+	im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU;
+	im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL;
+	im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU;
+	im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL;

 	/* Initialize MDDRC */
-	im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG;
-	im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0;
-	im->mddrc.ddr_time_config1 = CFG_MDDRC_TIME_CFG1;
-	im->mddrc.ddr_time_config2 = CFG_MDDRC_TIME_CFG2;
+	im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG;
+	im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0;
+	im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1;
+	im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2;

 	/* Initialize DDR */
 	for (i = 0; i < 10; i++)
-		im->mddrc.ddr_command = CFG_MICRON_NOP;
+		im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;

-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_RFSH;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_RFSH;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_EM2;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_EM2;
-	im->mddrc.ddr_command = CFG_MICRON_EM3;
-	im->mddrc.ddr_command = CFG_MICRON_EN_DLL;
-	im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_RFSH;
-	im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
-	im->mddrc.ddr_command = CFG_MICRON_OCD_DEFAULT;
-	im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
-	im->mddrc.ddr_command = CFG_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL;
+	im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP;

 	/* Start MDDRC */
-	im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0_RUN;
-	im->mddrc.ddr_sys_config = CFG_MDDRC_SYS_CFG_RUN;
+	im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN;
+	im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN;

 	return msize;
 }
@@ -286,17 +296,28 @@ static  iopin_t ioregs_init[] = {
 	}
 };

+static  iopin_t rev2_silicon_pci_ioregs_init[] = {
+	/* FUNC0=PCI Sets next 54 to PCI pads */
+	{
+		IOCTL_PCI_AD31, 54, 0,
+		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
+	}
+};
+
 int checkboard (void)
 {
-	ushort brd_rev = *(vu_short *) (CFG_CPLD_BASE + 0x00);
-	uchar cpld_rev = *(vu_char *) (CFG_CPLD_BASE + 0x02);
+	ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
+	uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;

 	printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
 		brd_rev, cpld_rev);
 	/* initialize function mux & slew rate IO inter alia on IO Pins  */

-
 	iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
+	if (SVR_MJREV (im->sysconf.spridr) >= 2) {
+		iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
+	}

 	return 0;
 }
@@ -308,3 +329,104 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	debug ("init_ide_reset\n");
+
+	/*
+	 * Clear the reset bit to reset the interface
+	 * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
+	 */
+	immr->pata.pata_ata_control = 0;
+	udelay(100);
+	/* Assert the reset bit to enable the interface */
+	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+	udelay(100);
+
+}
+
+void ide_set_reset (int idereset)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	debug ("ide_set_reset(%d)\n", idereset);
+
+	if (idereset) {
+		immr->pata.pata_ata_control = 0;
+		udelay(100);
+	} else {
+		immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+		udelay(100);
+	}
+}
+
+#define CALC_TIMING(t) (t + period - 1) / period
+
+int ide_preinit (void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	long t;
+	const struct {
+		short t0;
+		short t1;
+		short t2_8;
+		short t2_16;
+		short t2i;
+		short t4;
+		short t9;
+		short tA;
+	} pio_specs = {
+		.t0    = 600,
+		.t1    =  70,
+		.t2_8  = 290,
+		.t2_16 = 165,
+		.t2i   =   0,
+		.t4    =  30,
+		.t9    =  20,
+		.tA    =  50,
+	};
+	union {
+		u32 config;
+		struct {
+			u8 field1;
+			u8 field2;
+			u8 field3;
+			u8 field4;
+		}bytes;
+	}cfg;
+
+	debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
+		(u32)&immr->pata);
+
+	/* Set the reset bit to 1 to enable the interface */
+	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+
+	/* Init timings : we use PIO mode 0 timings */
+	t = 1000000000 / gd->ips_clk;	/* period in ns */
+	cfg.bytes.field1 = 3;
+	cfg.bytes.field2 = 3;
+	cfg.bytes.field3 = (pio_specs.t1 + t) / t;
+	cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
+
+	immr->pata.pata_time1 = cfg.config;
+
+	cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
+	cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
+	cfg.bytes.field3 = 1;
+	cfg.bytes.field4 = (pio_specs.t4 + t) / t;
+
+	immr->pata.pata_time2 = cfg.config;
+
+	cfg.config = immr->pata.pata_time3;
+	cfg.bytes.field1 = (pio_specs.t9 + t) / t;
+
+	immr->pata.pata_time3 = cfg.config;
+	debug ("PATA preinit complete.\n");
+
+	return 0;
+}
+
+#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -37,13 +37,17 @@
 #include <video_fb.h>
 #endif

+#ifdef CONFIG_FSL_DIU_LOGO_BMP
 extern unsigned int FSL_Logo_BMP[];
+#else
+#define FSL_Logo_BMP NULL
+#endif

 static int xres, yres;

 void diu_set_pixel_clock(unsigned int pixclock)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
 	volatile clk512x_t *clk = &immap->clk;
 	volatile unsigned int *clkdvdr = &clk->scfr[0];
 	unsigned long speed_ccb, temp, pixval;
@@ -61,16 +65,40 @@ void diu_set_pixel_clock(unsigned int pixclock)
 	debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *clkdvdr);
 }

+char *valid_bmp(char *addr)
+{
+	unsigned long h_addr;
+
+	h_addr = simple_strtoul(addr, NULL, 16);
+	if (h_addr < CONFIG_SYS_FLASH_BASE ||
+			h_addr >= (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - 1)) {
+		printf("bmp addr %lx is not a valid flash address\n", h_addr);
+		return 0;
+	} else if ((*(char *)(h_addr) != 'B') || (*(char *)(h_addr+1) != 'M')) {
+		printf("bmp addr is not a bmp\n");
+		return 0;
+	} else
+		return (char *)h_addr;
+}
+
 int ads5121_diu_init(void)
 {
 	unsigned int pixel_format;
+	char *bmp = NULL;
+	char *bmp_env;

 	xres = 1024;
 	yres = 768;
 	pixel_format = 0x88883316;

-	return fsl_diu_init(xres, pixel_format, 0,
-		     (unsigned char *)FSL_Logo_BMP);
+	debug("ads5121_diu_init\n");
+	bmp_env = getenv("diu_bmp_addr");
+	if (bmp_env) {
+		bmp = valid_bmp(bmp_env);
+	}
+	if (!bmp)
+		bmp = FSL_Logo_BMP;
+	return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
 }

 int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
@@ -79,7 +107,7 @@ int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
 	unsigned int addr;

 	if (argc < 2) {
-		printf("Usage:\n%s\n", cmdtp->usage);
+		cmd_usage(cmdtp);
 		return 1;
 	}

@@ -100,8 +128,8 @@ int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
 }

 U_BOOT_CMD(
-	diufb, CFG_MAXARGS, 1, ads5121diu_init_show_bmp,
-	"diufb init | addr - Init or Display BMP file\n",
+	diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
+	"Init or Display BMP file",
 	"init\n    - initialize DIU\n"
 	"addr\n    - display bmp at address 'addr'\n"
 	);
--- a/Show More
+++ b/Show More