Prepare v2017.01

Signed-off-by: Tom Rini <trini@konsulko.com>

.gitignore

@@ -31,7 +31,7 @@
 # Top-level generic files
 #
 /MLO*
-/SPL
+/SPL*
 /System.map
 /u-boot*
 /boards.cfg

.travis.yml

@@ -10,8 +10,6 @@ language: c
 
 addons:
   apt:
-    sources:
-    - sourceline: 'ppa:gns3/qemu'
     packages:
     - cppcheck
     - sloccount
@@ -21,10 +19,6 @@ addons:
     - libsdl1.2-dev
     - python
     - python-virtualenv
-    - qemu-system-arm
-    - qemu-system-mips
-    - qemu-system-ppc
-    - qemu-system-x86
     - gcc-powerpc-linux-gnu
     - gcc-arm-linux-gnueabihf
     - gcc-aarch64-linux-gnu
@@ -54,7 +48,7 @@ install:
 
 env:
   global:
-    - PATH=/tmp/dtc:/tmp/uboot-test-hooks/bin:$PATH
+    - PATH=/tmp/dtc:/tmp/qemu-install/bin:/tmp/uboot-test-hooks/bin:$PATH
     - PYTHONPATH=/tmp/uboot-test-hooks/py/travis-ci
     - BUILD_DIR=build
     - HOSTCC="cc"
@@ -74,6 +68,15 @@ before_script:
       echo -e "\n[toolchain-prefix]\nx86 = ${HOME}/.buildman-toolchains/gcc-4.9.0-nolibc/x86_64-linux/bin/x86_64-linux-" >> ~/.buildman;
     fi
   - if [[ "${TOOLCHAIN}" == *xtensa* ]]; then ./tools/buildman/buildman --fetch-arch xtensa ; fi
+  - if [[ "${QEMU_TARGET}" != "" ]]; then
+       git clone git://git.qemu.org/qemu.git /tmp/qemu;
+       pushd /tmp/qemu;
+       git submodule update --init dtc &&
+       git checkout v2.8.0-rc3 &&
+       ./configure --prefix=/tmp/qemu-install --target-list=${QEMU_TARGET} &&
+       make -j4 all install;
+       popd;
+    fi
 
 script:
  # Comments must be outside the command strings below, or the Travis parser
@@ -254,45 +257,60 @@ matrix:
     - env:
         - TEST_PY_BD="vexpress_ca15_tc2"
           TEST_PY_ID="--id qemu"
+          QEMU_TARGET="arm-softmmu"
           BUILDMAN="^vexpress_ca15_tc2$"
     - env:
         - TEST_PY_BD="vexpress_ca9x4"
           TEST_PY_ID="--id qemu"
+          QEMU_TARGET="arm-softmmu"
           BUILDMAN="^vexpress_ca9x4$"
     - env:
         - TEST_PY_BD="integratorcp_cm926ejs"
           TEST_PY_TEST_SPEC="not sleep"
           TEST_PY_ID="--id qemu"
+          QEMU_TARGET="arm-softmmu"
           BUILDMAN="^integratorcp_cm926ejs$"
     - env:
         - TEST_PY_BD="qemu_mips"
           TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="mips-softmmu"
           BUILDMAN="^qemu_mips$"
           TOOLCHAIN="mips"
     - env:
         - TEST_PY_BD="qemu_mipsel"
           TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="mipsel-softmmu"
           BUILDMAN="^qemu_mipsel$"
           TOOLCHAIN="mips"
     - env:
         - TEST_PY_BD="qemu_mips64"
           TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="mips64-softmmu"
           BUILDMAN="^qemu_mips64$"
           TOOLCHAIN="mips"
     - env:
         - TEST_PY_BD="qemu_mips64el"
           TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="mips64el-softmmu"
           BUILDMAN="^qemu_mips64el$"
           TOOLCHAIN="mips"
     - env:
         - TEST_PY_BD="qemu-ppce500"
           TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="ppc-softmmu"
           BUILDMAN="^qemu-ppce500$"
     - env:
         - TEST_PY_BD="qemu-x86"
           TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="i386-softmmu"
           BUILDMAN="^qemu-x86$"
           TOOLCHAIN="x86_64"
           BUILD_ROM="yes"
+    - env:
+        - TEST_PY_BD="zynq_zc702"
+          TEST_PY_TEST_SPEC="not sleep"
+          QEMU_TARGET="arm-softmmu"
+          TEST_PY_ID="--id qemu"
+          BUILDMAN="^zynq_zc702$"
 
 # TODO make it perfect ;-r

MAINTAINERS

@@ -69,8 +69,7 @@ ARM ALTERA SOCFPGA
 M:	Marek Vasut <marex@denx.de>
 S:	Maintainted
 T:	git git://git.denx.de/u-boot-socfpga.git
-F:	arch/arm/cpu/armv7/socfpga/
-F:	board/altera/socfpga/
+F:	arch/arm/mach-socfpga/
 
 ARM ATMEL AT91
 M:	Andreas Bießmann <andreas@biessmann.org>
@@ -243,7 +242,7 @@ T:	git git://git.denx.de/u-boot-coldfire.git
 F:	arch/m68k/
 
 DFU
-M:	Lukasz Majewski <l.majewski@samsung.com>
+M:	Lukasz Majewski <l.majewski@majess.pl>
 S:	Maintained
 T:	git git://git.denx.de/u-boot-dfu.git
 F:	drivers/dfu/
@@ -367,6 +366,12 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-ppc4xx.git
 F:	arch/powerpc/cpu/ppc4xx/
 
+POWER
+M:	Jaehoon Chung <jh80.chung@samsung.com>
+S:	Maintained
+T:	git git://git.denx.de/u-boot-pmic.git
+F:	drivers/power/
+
 NETWORK
 M:	Joe Hershberger <joe.hershberger@ni.com>
 S:	Maintained
@@ -393,8 +398,8 @@ T:	git git://git.denx.de/u-boot-nios.git
 F:	arch/nios2/
 
 ONENAND
-M:	Lukasz Majewski <l.majewski@samsung.com>
-S:	Maintained
+#M:	Lukasz Majewski <l.majewski@majess.pl>
+S:	Orphaned (Since 2017-01)
 T:	git git://git.denx.de/u-boot-onenand.git
 F:	drivers/mtd/onenand/
 

Makefile

@@ -5,7 +5,7 @@
 VERSION = 2017
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -763,7 +763,11 @@ ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 endif
 endif
 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
@@ -809,9 +813,11 @@ cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 quiet_cmd_efipayload = OBJCOPY $@
 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
 
+MKIMAGEOUTPUT ?= /dev/null
+
 quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
+	$(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
@@ -903,6 +909,12 @@ u-boot.ldr:	u-boot
 		$(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
 		$(BOARD_SIZE_CHECK)
 
+# binman
+# ---------------------------------------------------------------------------
+quiet_cmd_binman = BINMAN  $@
+cmd_binman = $(srctree)/tools/binman/binman -d u-boot.dtb -O . \
+		-I . -I $(srctree)/board/$(BOARDDIR) $<
+
 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
 
 OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
@@ -932,6 +944,11 @@ else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
 	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+	-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
 endif
 
 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
@@ -945,7 +962,7 @@ MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 		-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
-u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
 	$(call if_changed,mkimage)
 
@@ -1047,50 +1064,11 @@ endif
 
 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle.
+# the middle. This is handled by binman based on an image description in the
+# board's device tree.
 ifneq ($(CONFIG_X86_RESET_VECTOR),)
 rom: u-boot.rom FORCE
 
-IFDTOOL=$(objtree)/tools/ifdtool
-IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
-IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
-IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-IFDTOOL_FLAGS += -C
-
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-endif
-
-ifneq ($(CONFIG_HAVE_MRC),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-endif
-
-ifneq ($(CONFIG_HAVE_FSP),)
-IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_CMC),)
-IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_VGA_BIOS),)
-IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_REFCODE),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
-endif
-
-quiet_cmd_ifdtool = IFDTOOL $@
-cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-endif
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-cmd_ifdtool += mv u-boot.tmp $@
-
 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
 	$(call if_changed,copy)
 
@@ -1100,7 +1078,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
 
 u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
 		$(if $(CONFIG_HAVE_REFCODE),refcode.bin)
-	$(call if_changed,ifdtool)
+	$(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
 u-boot-x86-16bit.bin: u-boot FORCE
@@ -1108,10 +1086,8 @@ u-boot-x86-16bit.bin: u-boot FORCE
 endif
 
 ifneq ($(CONFIG_ARCH_SUNXI),)
-OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
-				   --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
-	$(call if_changed,pad_cat)
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
+	$(call if_changed,binman)
 endif
 
 ifneq ($(CONFIG_TEGRA),)

README

@@ -376,15 +376,6 @@ The following options need to be configured:
 		Defines the string to utilize when trying to match PCIe device
 		tree nodes for the given platform.
 
-		CONFIG_SYS_PPC_E500_DEBUG_TLB
-
-		Enables a temporary TLB entry to be used during boot to work
-		around limitations in e500v1 and e500v2 external debugger
-		support. This reduces the portions of the boot code where
-		breakpoints and single stepping do not work.  The value of this
-		symbol should be set to the TLB1 entry to be used for this
-		purpose.
-
 		CONFIG_SYS_FSL_ERRATUM_A004510
 
 		Enables a workaround for erratum A004510.  If set,
@@ -4593,12 +4584,6 @@ Low Level (hardware related) configuration options:
 		addressable memory. This option causes some memory accesses
 		to be mapped through map_sysmem() / unmap_sysmem().
 
-- CONFIG_USE_ARCH_MEMCPY
-  CONFIG_USE_ARCH_MEMSET
-		If these options are used a optimized version of memcpy/memset will
-		be used if available. These functions may be faster under some
-		conditions but may increase the binary size.
-
 - CONFIG_X86_RESET_VECTOR
 		If defined, the x86 reset vector code is included. This is not
 		needed when U-Boot is running from Coreboot.

arch/arm/Kconfig

@@ -126,6 +126,24 @@ config ENABLE_ARM_SOC_BOOT0_HOOK
 	  ARM_SOC_BOOT0_HOOK which contains the required assembler
 	  preprocessor code.
 
+config USE_ARCH_MEMCPY
+	bool "Use an assembly optimized implementation of memcpy"
+	default y if CPU_V7
+	depends on !ARM64
+	help
+	  Enable the generation of an optimized version of memcpy.
+	  Such implementation may be faster under some conditions
+	  but may increase the binary size.
+
+config USE_ARCH_MEMSET
+	bool "Use an assembly optimized implementation of memset"
+	default y if CPU_V7
+	depends on !ARM64
+	help
+	  Enable the generation of an optimized version of memset.
+	  Such implementation may be faster under some conditions
+	  but may increase the binary size.
+
 config ARCH_OMAP2
 	bool
 	select CPU_V7
@@ -446,10 +464,16 @@ config ARCH_MESON
 config ARCH_MX7
 	bool "Freescale MX7"
 	select CPU_V7
+	select SYS_FSL_HAS_SEC if SECURE_BOOT
+	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SEC_LE
 
 config ARCH_MX6
 	bool "Freescale MX6"
 	select CPU_V7
+	select SYS_FSL_HAS_SEC if SECURE_BOOT
+	select SYS_FSL_SEC_COMPAT_4
+	select SYS_FSL_SEC_LE
 
 config ARCH_MX5
 	bool "Freescale MX5"
@@ -522,6 +546,7 @@ config ARCH_RMOBILE
 config TARGET_S32V234EVB
 	bool "Support s32v234evb"
 	select ARM64
+	select SYS_FSL_ERRATUM_ESDHC111
 
 config ARCH_SNAPDRAGON
 	bool "Qualcomm Snapdragon SoCs"
@@ -542,6 +567,7 @@ config ARCH_SOCFPGA
 	select DM
 	select DM_SPI_FLASH
 	select DM_SPI
+	select ENABLE_ARM_SOC_BOOT0_HOOK
 
 config TARGET_CM_T43
 	bool "Support cm_t43"
@@ -577,22 +603,31 @@ config TARGET_TS4600
 config TARGET_TS4800
 	bool "Support TS4800"
 	select CPU_V7
+	select SYS_FSL_ERRATUM_ESDHC_A001
 
 config TARGET_VF610TWR
 	bool "Support vf610twr"
 	select CPU_V7
+	select SYS_FSL_ERRATUM_ESDHC111
 
 config TARGET_COLIBRI_VF
 	bool "Support Colibri VF50/61"
 	select CPU_V7
+	select SYS_FSL_ERRATUM_ESDHC111
 
 config TARGET_PCM052
 	bool "Support pcm-052"
 	select CPU_V7
+	select SYS_FSL_ERRATUM_ESDHC111
+	select SYS_FSL_ERRATUM_ESDHC135
+	select SYS_FSL_ERRATUM_ESDHC_A001
 
 config TARGET_BK4R1
 	bool "Support BK4r1"
 	select CPU_V7
+	select SYS_FSL_ERRATUM_ESDHC111
+	select SYS_FSL_ERRATUM_ESDHC135
+	select SYS_FSL_ERRATUM_ESDHC_A001
 
 config ARCH_ZYNQ
 	bool "Xilinx Zynq Platform"
@@ -745,6 +780,7 @@ config TARGET_LS1021AQDS
 	select ARCH_LS1021A
 	select ARCH_SUPPORT_PSCI
 	select LS1_DEEP_SLEEP
+	select SYS_FSL_DDR
 
 config TARGET_LS1021ATWR
 	bool "Support ls1021atwr"
@@ -828,7 +864,6 @@ config TARGET_COLIBRI_PXA270
 
 config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoCs"
-	select BLK
 	select CLK_UNIPHIER
 	select DM
 	select DM_GPIO
@@ -900,6 +935,8 @@ source "arch/arm/mach-keystone/Kconfig"
 
 source "arch/arm/mach-kirkwood/Kconfig"
 
+source "arch/arm/mach-litesom/Kconfig"
+
 source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/cpu/armv7/ls102xa/Kconfig"

arch/arm/Makefile

@@ -58,6 +58,7 @@ machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 # TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
 machine-$(CONFIG_KIRKWOOD)		+= kirkwood
+machine-$(CONFIG_LITESOM)		+= litesom
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
@@ -94,7 +95,7 @@ libs-y += arch/arm/cpu/
 libs-y += arch/arm/lib/
 
 ifeq ($(CONFIG_SPL_BUILD),y)
-ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx7 mx31 mx35))
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35))
 libs-y += arch/arm/imx-common/
 endif
 else

arch/arm/config.mk

@@ -121,7 +121,8 @@ endif
 
 # limit ourselves to the sections we want in the .bin.
 ifdef CONFIG_ARM64
-OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
+OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .data \
+		-j .u_boot_list -j .rela.dyn
 else
 OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .hash \
 		-j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn

arch/arm/cpu/arm926ejs/mxs/spl_boot.c

@@ -40,17 +40,17 @@ void early_delay(int delay)
 		;
 }
 
+#if defined(CONFIG_MX23)
 #define	MUX_CONFIG_BOOTMODE_PAD	(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
 static const iomux_cfg_t iomux_boot[] = {
-#if defined(CONFIG_MX23)
 	MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
 	MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
 	MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
 	MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
 	MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
 	MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
-#endif
 };
+#endif
 
 static uint8_t mxs_get_bootmode_index(void)
 {

arch/arm/cpu/armv7/arch_timer.c

@@ -8,6 +8,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <div64.h>
+#include <bootstage.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -17,7 +18,6 @@ int timer_init(void)
 	gd->arch.tbu = 0;
 
 	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
-
 	return 0;
 }
 
@@ -39,6 +39,11 @@ ulong get_timer(ulong base)
 	return lldiv(get_ticks(), gd->arch.timer_rate_hz) - base;
 }
 
+ulong timer_get_boot_us(void)
+{
+	return lldiv(get_ticks(), CONFIG_SYS_HZ_CLOCK / (CONFIG_SYS_HZ * 1000));
+}
+
 void __udelay(unsigned long usec)
 {
 	unsigned long long endtime;

arch/arm/cpu/armv7/ls102xa/Kconfig

@@ -1,10 +1,19 @@
 config ARCH_LS1021A
 	bool
+	select SYS_FSL_ERRATUM_A008378
+	select SYS_FSL_ERRATUM_A008407
+	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
-	select SYS_FSL_DDR_BE
-	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_DDR_BE if SYS_FSL_DDR
+	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
+	select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
+	select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
 
 menu "LS102xA architecture"
 	depends on ARCH_LS1021A
@@ -24,10 +33,6 @@ config MAX_CPUS
 	  cores, count the reserved ports. This will allocate enough memory
 	  in spin table to properly handle all cores.
 
-config NUM_DDR_CONTROLLERS
-	int "Maximum DDR controllers"
-	default 1
-
 config SECURE_BOOT
 	bool	"Secure Boot"
 	help
@@ -46,50 +51,12 @@ config SYS_FSL_SRDS_2
 config SYS_HAS_SERDES
 	bool
 
-config SYS_FSL_DDR
-	bool "Freescale DDR driver"
-	help
-	  Select Freescale General DDR driver, shared between most Freescale
-	  PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
-	  based Layerscape SoCs (such as ls2080a).
-
-config SYS_FSL_DDR_BE
-	bool
-	default y
-	help
-	  Access DDR registers in big-endian.
-
-config SYS_FSL_DDR_VER
-	int
-	default 50 if SYS_FSL_DDR_VER_50
-
-config SYS_FSL_DDR_VER_50
-	bool
-
-config SYS_FSL_DDRC_ARM_GEN3
-	bool
-
-config SYS_FSL_DDRC_GEN4
-	bool
-
-config SYS_FSL_DDR3
-	bool "Freescale DDR3 controller"
-	depends on !SYS_FSL_DDR4
-	select SYS_FSL_DDR
-	select SYS_FSL_DDRC_ARM_GEN3
-	help
-	  Enable Freescale DDR3 controller on ARM-based SoCs.
-
-config SYS_FSL_DDR4
-	bool "Freescale DDR4 controller"
-	select SYS_FSL_DDR
-	select SYS_FSL_DDRC_GEN4
-	help
-	  Enable Freescale DDR4 controller.
-
 config SYS_FSL_IFC_BANK_COUNT
 	int "Maximum banks of Integrated flash controller"
 	depends on ARCH_LS1021A
 	default 8
 
+config SYS_FSL_ERRATUM_A008407
+	bool
+
 endmenu

arch/arm/cpu/armv7/mx5/Kconfig

@@ -18,11 +18,19 @@ config TARGET_USBARMORY
 	bool "Support USB armory"
 	select CPU_V7
 
+config TARGET_MX53CX9020
+	bool "Support CX9020"
+	select CPU_V7
+	select MX53
+	select DM
+	select DM_SERIAL
+
 endchoice
 
 config SYS_SOC
 	default "mx5"
 
+source "board/beckhoff/mx53cx9020/Kconfig"
 source "board/inversepath/usbarmory/Kconfig"
 
 endif

arch/arm/cpu/armv7/mx6/Kconfig

@@ -26,6 +26,10 @@ config MX6SX
 	select ROM_UNIFIED_SECTIONS
 	bool
 
+config MX6SLL
+	select ROM_UNIFIED_SECTIONS
+	bool
+
 config MX6UL
 	select SYS_L2CACHE_OFF
 	select ROM_UNIFIED_SECTIONS
@@ -51,6 +55,13 @@ config TARGET_ADVANTECH_DMS_BA16
 	bool "Advantech dms-ba16"
 	select MX6Q
 
+config TARGET_APALIS_IMX6
+	bool "Toradex Apalis iMX6 board"
+	select SUPPORT_SPL
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+
 config TARGET_ARISTAINETOS
 	bool "aristainetos"
 
@@ -73,6 +84,13 @@ config TARGET_CM_FX6
 	select DM_SERIAL
 	select DM_GPIO
 
+config TARGET_COLIBRI_IMX6
+	bool "Toradex Colibri iMX6 board"
+	select SUPPORT_SPL
+	select DM
+	select DM_SERIAL
+	select DM_THERMAL
+
 config TARGET_EMBESTMX6BOARDS
 	bool "embestmx6boards"
 
@@ -108,7 +126,21 @@ config TARGET_MX6Q_ICORE
 	select MX6QDL
 	select OF_CONTROL
 	select DM
+	select DM_ETH
 	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select SUPPORT_SPL
+
+config TARGET_MX6Q_ICORE_RQS
+	bool "Support Engicam i.Core RQS"
+	select MX6QDL
+	select OF_CONTROL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
 	select DM_MMC
 	select DM_THERMAL
 	select SUPPORT_SPL
@@ -128,6 +160,12 @@ config TARGET_MX6SLEVK
 	bool "mx6slevk"
 	select SUPPORT_SPL
 
+config TARGET_MX6SLLEVK
+        bool "mx6sll evk"
+        select MX6SLL
+        select DM
+        select DM_THERMAL
+
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
 	select MX6SX
@@ -155,6 +193,18 @@ config TARGET_MX6UL_14X14_EVK
 	select DM_THERMAL
 	select SUPPORT_SPL
 
+config TARGET_MX6UL_GEAM
+	bool "Support Engicam GEAM6UL"
+	select MX6UL
+	select OF_CONTROL
+	select DM
+	select DM_ETH
+	select DM_GPIO
+	select DM_I2C
+	select DM_MMC
+	select DM_THERMAL
+	select SUPPORT_SPL
+
 config TARGET_MX6ULL_14X14_EVK
 	bool "Support mx6ull_14x14_evk"
 	select MX6ULL
@@ -172,6 +222,10 @@ config TARGET_PICO_IMX6UL
 	bool "PICO-IMX6UL-EMMC"
 	select MX6UL
 
+config TARGET_LITEBOARD
+	bool "Grinn liteBoard (i.MX6UL)"
+	select LITESOM
+
 config TARGET_PLATINUM_PICON
 	bool "platinum-picon"
 	select SUPPORT_SPL
@@ -203,6 +257,9 @@ config TARGET_UDOO
 config TARGET_UDOO_NEO
 	bool "UDOO Neo"
 	select SUPPORT_SPL
+	select MX6SX
+	select DM
+	select DM_THERMAL
 
 config TARGET_SAMTEC_VINING_2000
 	bool "samtec VIN|ING 2000"
@@ -253,15 +310,19 @@ source "board/compulab/cm_fx6/Kconfig"
 source "board/congatec/cgtqmx6eval/Kconfig"
 source "board/el/el6x/Kconfig"
 source "board/embest/mx6boards/Kconfig"
+source "board/engicam/geam6ul/Kconfig"
 source "board/engicam/icorem6/Kconfig"
+source "board/engicam/icorem6_rqs/Kconfig"
 source "board/freescale/mx6qarm2/Kconfig"
 source "board/freescale/mx6qsabreauto/Kconfig"
 source "board/freescale/mx6sabresd/Kconfig"
 source "board/freescale/mx6slevk/Kconfig"
+source "board/freescale/mx6sllevk/Kconfig"
 source "board/freescale/mx6sxsabresd/Kconfig"
 source "board/freescale/mx6sxsabreauto/Kconfig"
 source "board/freescale/mx6ul_14x14_evk/Kconfig"
 source "board/freescale/mx6ullevk/Kconfig"
+source "board/grinn/liteboard/Kconfig"
 source "board/phytec/pcm058/Kconfig"
 source "board/gateworks/gw_ventana/Kconfig"
 source "board/kosagi/novena/Kconfig"
@@ -271,6 +332,8 @@ source "board/solidrun/mx6cuboxi/Kconfig"
 source "board/technexion/pico-imx6ul/Kconfig"
 source "board/tbs/tbs2910/Kconfig"
 source "board/tqc/tqma6/Kconfig"
+source "board/toradex/apalis_imx6/Kconfig"
+source "board/toradex/colibri_imx6/Kconfig"
 source "board/udoo/Kconfig"
 source "board/udoo/neo/Kconfig"
 source "board/wandboard/Kconfig"

arch/arm/cpu/armv7/mx6/clock.c

@@ -171,6 +171,8 @@ int enable_i2c_clk(unsigned char enable, unsigned i2c_num)
 			reg &= ~mask;
 		__raw_writel(reg, &imx_ccm->CCGR2);
 	} else {
+		if (is_mx6sll())
+			return -EINVAL;
 		if (is_mx6sx() || is_mx6ul() || is_mx6ull()) {
 			mask = MXC_CCM_CCGR6_I2C4_MASK;
 			addr = &imx_ccm->CCGR6;
@@ -382,7 +384,7 @@ static u32 get_ipg_per_clk(void)
 	u32 reg, perclk_podf;
 
 	reg = __raw_readl(&imx_ccm->cscmr1);
-	if (is_mx6sl() || is_mx6sx() ||
+	if (is_mx6sll() || is_mx6sl() || is_mx6sx() ||
 	    is_mx6dqp() || is_mx6ul() || is_mx6ull()) {
 		if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK)
 			return MXC_HCLK; /* OSC 24Mhz */
@@ -400,7 +402,7 @@ static u32 get_uart_clk(void)
 	reg = __raw_readl(&imx_ccm->cscdr1);
 
 	if (is_mx6sl() || is_mx6sx() || is_mx6dqp() || is_mx6ul() ||
-	    is_mx6ull()) {
+	    is_mx6sll() || is_mx6ull()) {
 		if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
 			freq = MXC_HCLK;
 	}
@@ -420,7 +422,7 @@ static u32 get_cspi_clk(void)
 		     MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
 
 	if (is_mx6dqp() || is_mx6sl() || is_mx6sx() || is_mx6ul() ||
-	    is_mx6ull()) {
+	    is_mx6sll() || is_mx6ull()) {
 		if (reg & MXC_CCM_CSCDR2_ECSPI_CLK_SEL_MASK)
 			return MXC_HCLK / (cspi_podf + 1);
 	}
@@ -482,7 +484,8 @@ static u32 get_mmdc_ch0_clk(void)
 
 	u32 freq, podf, per2_clk2_podf, pmu_misc2_audio_div;
 
-	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl()) {
+	if (is_mx6sx() || is_mx6ul() || is_mx6ull() || is_mx6sl() ||
+	    is_mx6sll()) {
 		podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) >>
 			MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET;
 		if (cbcdr & MXC_CCM_CBCDR_PERIPH2_CLK_SEL) {
@@ -514,6 +517,11 @@ static u32 get_mmdc_ch0_clk(void)
 				freq = mxc_get_pll_pfd(PLL_BUS, 0);
 				break;
 			case 3:
+				if (is_mx6sl()) {
+					freq = mxc_get_pll_pfd(PLL_BUS, 2) >> 1;
+					break;
+				}
+
 				pmu_misc2_audio_div = PMU_MISC2_AUDIO_DIV(__raw_readl(&imx_ccm->pmu_misc2));
 				switch (pmu_misc2_audio_div) {
 				case 0:
@@ -620,16 +628,19 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 
 	debug("mxs_set_lcdclk, freq = %dKHz\n", freq);
 
-	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull()) {
+	if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl() &&
+	    !is_mx6sll()) {
 		debug("This chip not support lcd!\n");
 		return;
 	}
 
-	if (base_addr == LCDIF1_BASE_ADDR) {
-		reg = readl(&imx_ccm->cscdr2);
-		/* Can't change clocks when clock not from pre-mux */
-		if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
-			return;
+	if (!is_mx6sl()) {
+		if (base_addr == LCDIF1_BASE_ADDR) {
+			reg = readl(&imx_ccm->cscdr2);
+			/* Can't change clocks when clock not from pre-mux */
+			if ((reg & MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK) != 0)
+				return;
+		}
 	}
 
 	if (is_mx6sx()) {
@@ -700,24 +711,44 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 		if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
 			return;
 
-		/* Select pre-lcd clock to PLL5 and set pre divider */
-		clrsetbits_le32(&imx_ccm->cscdr2,
-				MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
-				MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
-				(0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
-				((pred - 1) <<
-				 MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
+		enable_lcdif_clock(base_addr, 0);
+		if (!is_mx6sl()) {
+			/* Select pre-lcd clock to PLL5 and set pre divider */
+			clrsetbits_le32(&imx_ccm->cscdr2,
+					MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_MASK |
+					MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_MASK,
+					(0x2 << MXC_CCM_CSCDR2_LCDIF1_PRED_SEL_OFFSET) |
+					((pred - 1) <<
+					 MXC_CCM_CSCDR2_LCDIF1_PRE_DIV_OFFSET));
 
-		/* Set the post divider */
-		clrsetbits_le32(&imx_ccm->cbcmr,
-				MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
-				((postd - 1) <<
-				 MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+			/* Set the post divider */
+			clrsetbits_le32(&imx_ccm->cbcmr,
+					MXC_CCM_CBCMR_LCDIF1_PODF_MASK,
+					((postd - 1) <<
+					MXC_CCM_CBCMR_LCDIF1_PODF_OFFSET));
+		} else {
+			/* Select pre-lcd clock to PLL5 and set pre divider */
+			clrsetbits_le32(&imx_ccm->cscdr2,
+					MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK |
+					MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK,
+					(0x2 << MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET) |
+					((pred - 1) <<
+					 MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET));
+
+			/* Set the post divider */
+			clrsetbits_le32(&imx_ccm->cscmr1,
+					MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK,
+					(((postd - 1)^0x6) <<
+					 MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET));
+		}
+
+		enable_lcdif_clock(base_addr, 1);
 	} else if (is_mx6sx()) {
 		/* Setting LCDIF2 for i.MX6SX */
 		if (enable_pll_video(pll_div, pll_num, pll_denom, post_div))
 			return;
 
+		enable_lcdif_clock(base_addr, 0);
 		/* Select pre-lcd clock to PLL5 and set pre divider */
 		clrsetbits_le32(&imx_ccm->cscdr2,
 				MXC_CCM_CSCDR2_LCDIF2_PRED_SEL_MASK |
@@ -731,10 +762,12 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
 				MXC_CCM_CSCMR1_LCDIF2_PODF_MASK,
 				((postd - 1) <<
 				 MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET));
+
+		enable_lcdif_clock(base_addr, 1);
 	}
 }
 
-int enable_lcdif_clock(u32 base_addr)
+int enable_lcdif_clock(u32 base_addr, bool enable)
 {
 	u32 reg = 0;
 	u32 lcdif_clk_sel_mask, lcdif_ccgr3_mask;
@@ -754,7 +787,7 @@ int enable_lcdif_clock(u32 base_addr)
 			 MXC_CCM_CCGR3_DISP_AXI_MASK) :
 			(MXC_CCM_CCGR3_LCDIF1_PIX_MASK |
 			 MXC_CCM_CCGR3_DISP_AXI_MASK);
-	} else if (is_mx6ul() || is_mx6ull()) {
+	} else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
 		if (base_addr != LCDIF1_BASE_ADDR) {
 			puts("Wrong LCD interface!\n");
 			return -EINVAL;
@@ -762,23 +795,59 @@ int enable_lcdif_clock(u32 base_addr)
 		/* Set to pre-mux clock at default */
 		lcdif_clk_sel_mask = MXC_CCM_CSCDR2_LCDIF1_CLK_SEL_MASK;
 		lcdif_ccgr3_mask =  MXC_CCM_CCGR3_LCDIF1_PIX_MASK;
+	} else if (is_mx6sl()) {
+		if (base_addr != LCDIF1_BASE_ADDR) {
+			puts("Wrong LCD interface!\n");
+			return -EINVAL;
+		}
+
+		reg = readl(&imx_ccm->CCGR3);
+		reg &= ~(MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+			 MXC_CCM_CCGR3_LCDIF_PIX_MASK);
+		writel(reg, &imx_ccm->CCGR3);
+
+		if (enable) {
+			reg = readl(&imx_ccm->cscdr3);
+			reg &= ~MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK;
+			reg |= 1 << MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET;
+			writel(reg, &imx_ccm->cscdr3);
+
+			reg = readl(&imx_ccm->CCGR3);
+			reg |= MXC_CCM_CCGR3_LCDIF_AXI_MASK |
+				MXC_CCM_CCGR3_LCDIF_PIX_MASK;
+			writel(reg, &imx_ccm->CCGR3);
+		}
+
+		return 0;
 	} else {
 		return 0;
 	}
 
-	reg = readl(&imx_ccm->cscdr2);
-	reg &= ~lcdif_clk_sel_mask;
-	writel(reg, &imx_ccm->cscdr2);
-
-	/* Enable the LCDIF pix clock */
+	/* Gate LCDIF clock first */
 	reg = readl(&imx_ccm->CCGR3);
-	reg |= lcdif_ccgr3_mask;
+	reg &= ~lcdif_ccgr3_mask;
 	writel(reg, &imx_ccm->CCGR3);
 
 	reg = readl(&imx_ccm->CCGR2);
-	reg |= MXC_CCM_CCGR2_LCD_MASK;
+	reg &= ~MXC_CCM_CCGR2_LCD_MASK;
 	writel(reg, &imx_ccm->CCGR2);
 
+	if (enable) {
+		/* Select pre-mux */
+		reg = readl(&imx_ccm->cscdr2);
+		reg &= ~lcdif_clk_sel_mask;
+		writel(reg, &imx_ccm->cscdr2);
+
+		/* Enable the LCDIF pix clock */
+		reg = readl(&imx_ccm->CCGR3);
+		reg |= lcdif_ccgr3_mask;
+		writel(reg, &imx_ccm->CCGR3);
+
+		reg = readl(&imx_ccm->CCGR2);
+		reg |= MXC_CCM_CCGR2_LCD_MASK;
+		writel(reg, &imx_ccm->CCGR2);
+	}
+
 	return 0;
 }
 #endif
@@ -916,6 +985,16 @@ static u32 get_usdhc_clk(u32 port)
 	u32 cscmr1 = __raw_readl(&imx_ccm->cscmr1);
 	u32 cscdr1 = __raw_readl(&imx_ccm->cscdr1);
 
+	if (is_mx6ul() || is_mx6ull()) {
+		if (port > 1)
+			return 0;
+	}
+
+	if (is_mx6sll()) {
+		if (port > 2)
+			return 0;
+	}
+
 	switch (port) {
 	case 0:
 		usdhc_podf = (cscdr1 & MXC_CCM_CSCDR1_USDHC1_PODF_MASK) >>
@@ -1079,7 +1158,7 @@ void hab_caam_clock_enable(unsigned char enable)
 {
 	u32 reg;
 
-	if (is_mx6ull()) {
+	if (is_mx6ull() || is_mx6sll()) {
 		/* CG5, DCP clock */
 		reg = __raw_readl(&imx_ccm->CCGR0);
 		if (enable)

arch/arm/cpu/armv8/Kconfig

@@ -40,4 +40,45 @@ config PSCI_RESET
 
 	  Select Y here to make use of PSCI calls for system reset
 
+config ARMV8_PSCI
+	bool "Enable PSCI support" if EXPERT
+	default n
+	help
+	  PSCI is Power State Coordination Interface defined by ARM.
+	  The PSCI in U-boot provides a general framework and each platform
+	  can implement their own specific PSCI functions.
+	  Say Y here to enable PSCI support on ARMv8 platform.
+
+config ARMV8_PSCI_NR_CPUS
+	int "Maximum supported CPUs for PSCI"
+	depends on ARMV8_PSCI
+	default 4
+	help
+	  The maximum number of CPUs supported in the PSCI firmware.
+	  It is no problem to set a larger value than the number of CPUs in
+	  the actual hardware implementation.
+
+config ARMV8_PSCI_CPUS_PER_CLUSTER
+	int "Number of CPUs per cluster"
+	depends on ARMV8_PSCI
+	default 0
+	help
+	  The number of CPUs per cluster, suppose each cluster has same number
+	  of CPU cores, platforms with asymmetric clusters don't apply here.
+	  A value 0 or no definition of it works for single cluster system.
+	  System with multi-cluster should difine their own exact value.
+
+if SYS_HAS_ARMV8_SECURE_BASE
+
+config ARMV8_SECURE_BASE
+	hex "Secure address for PSCI image"
+	depends on ARMV8_PSCI
+	help
+	  Address for placing the PSCI text, data and stack sections.
+	  If not defined, the PSCI sections are placed together with the u-boot
+	  but platform can choose to place PSCI code image separately in other
+	  places such as some secure RAM built-in SOC etc.
+
+endif
+
 endif

arch/arm/cpu/armv8/Makefile

@@ -25,3 +25,4 @@ obj-$(CONFIG_FSL_LAYERSCAPE) += fsl-layerscape/
 obj-$(CONFIG_S32V234) += s32v234/
 obj-$(CONFIG_ARCH_ZYNQMP) += zynqmp/
 obj-$(CONFIG_TARGET_HIKEY) += hisilicon/
+obj-$(CONFIG_ARMV8_PSCI) += psci.o

arch/arm/cpu/armv8/cpu-dt.c

@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <asm/psci.h>
+#include <asm/system.h>
 #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
 #include <asm/armv8/sec_firmware.h>
 #endif
@@ -13,7 +14,8 @@
 int psci_update_dt(void *fdt)
 {
 #ifdef CONFIG_MP
-#if defined(CONFIG_ARMV8_PSCI)
+#if defined(CONFIG_ARMV8_PSCI) || defined(CONFIG_FSL_PPA_ARMV8_PSCI)
+
 #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
 	/*
 	 * If the PSCI in SEC Firmware didn't work, avoid to update the
@@ -25,6 +27,13 @@ int psci_update_dt(void *fdt)
 		return 0;
 #endif
 	fdt_psci(fdt);
+
+#if defined(CONFIG_ARMV8_PSCI) && !defined(CONFIG_ARMV8_SECURE_BASE)
+	/* secure code lives in RAM, keep it alive */
+	fdt_add_mem_rsv(fdt, (unsigned long)__secure_start,
+			__secure_end - __secure_start);
+#endif
+
 #endif
 #endif
 	return 0;

arch/arm/cpu/armv8/cpu.c

@@ -14,6 +14,7 @@
 #include <common.h>
 #include <command.h>
 #include <asm/system.h>
+#include <asm/secure.h>
 #include <linux/compiler.h>
 
 int cleanup_before_linux(void)
@@ -41,3 +42,24 @@ int cleanup_before_linux(void)
 
 	return 0;
 }
+
+#ifdef CONFIG_ARMV8_PSCI
+static void relocate_secure_section(void)
+{
+#ifdef CONFIG_ARMV8_SECURE_BASE
+	size_t sz = __secure_end - __secure_start;
+
+	memcpy((void *)CONFIG_ARMV8_SECURE_BASE, __secure_start, sz);
+	flush_dcache_range(CONFIG_ARMV8_SECURE_BASE,
+			   CONFIG_ARMV8_SECURE_BASE + sz + 1);
+	invalidate_icache_all();
+#endif
+}
+
+void armv8_setup_psci(void)
+{
+	relocate_secure_section();
+	secure_ram_addr(psci_setup_vectors)();
+	secure_ram_addr(psci_arch_init)();
+}
+#endif

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -8,31 +8,62 @@ config ARCH_LS1012A
 config ARCH_LS1043A
 	bool
 	select FSL_LSCH2
+	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_ERRATUM_A009660
+	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009929
+	select SYS_FSL_ERRATUM_A009942
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_ERRATUM_A010539
+	select SYS_FSL_HAS_DDR3
+	select SYS_FSL_HAS_DDR4
 
 config ARCH_LS1046A
 	bool
 	select FSL_LSCH2
+	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
-	select SYS_FSL_DDR4
 	select SYS_FSL_DDR_VER_50
+	select SYS_FSL_ERRATUM_A008511
+	select SYS_FSL_ERRATUM_A009801
+	select SYS_FSL_ERRATUM_A009803
+	select SYS_FSL_ERRATUM_A009942
+	select SYS_FSL_ERRATUM_A010165
 	select SYS_FSL_ERRATUM_A010539
+	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SRDS_2
 
 config ARCH_LS2080A
 	bool
 	select FSL_LSCH3
-	select SYS_FSL_DDR4
+	select SYS_FSL_DDR
 	select SYS_FSL_DDR_LE
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_HAS_DP_DDR
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_HAS_DDR4
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_LE
 	select SYS_FSL_SRDS_2
+	select SYS_FSL_ERRATUM_A008336
+	select SYS_FSL_ERRATUM_A008511
+	select SYS_FSL_ERRATUM_A008514
+	select SYS_FSL_ERRATUM_A008585
+	select SYS_FSL_ERRATUM_A009635
+	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009801
+	select SYS_FSL_ERRATUM_A009803
+	select SYS_FSL_ERRATUM_A009942
+	select SYS_FSL_ERRATUM_A010165
 
 config FSL_LSCH2
 	bool
+	select SYS_FSL_HAS_SEC
+	select SYS_FSL_SEC_COMPAT_5
+	select SYS_FSL_SEC_BE
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 
@@ -44,8 +75,26 @@ config FSL_LSCH3
 menu "Layerscape architecture"
 	depends on FSL_LSCH2 || FSL_LSCH3
 
-config SYS_FSL_MMDC
-	bool
+menu "Layerscape PPA"
+config FSL_LS_PPA
+	bool "FSL Layerscape PPA firmware support"
+	depends on !ARMV8_PSCI
+	depends on ARCH_LS1043A || ARCH_LS1046A
+	select FSL_PPA_ARMV8_PSCI
+	help
+	  The FSL Primary Protected Application (PPA) is a software component
+	  which is loaded during boot stage, and then remains resident in RAM
+	  and runs in the TrustZone after boot.
+	  Say y to enable it.
+
+config FSL_PPA_ARMV8_PSCI
+	bool "PSCI implementation in PPA firmware"
+	depends on FSL_LS_PPA
+	help
+	  This config enables the ARMv8 PSCI implementation in PPA firmware.
+	  This is a private PSCI implementation and different from those
+	  implemented under the common ARMv8 PSCI framework.
+endmenu
 
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
@@ -66,11 +115,6 @@ config MAX_CPUS
 	  cores, count the reserved ports. This will allocate enough memory
 	  in spin table to properly handle all cores.
 
-config NUM_DDR_CONTROLLERS
-	int "Maximum DDR controllers"
-	default 3 if ARCH_LS2080A
-	default 1
-
 config SECURE_BOOT
 	bool
 	help
@@ -102,49 +146,25 @@ config SYS_FSL_SRDS_2
 config SYS_HAS_SERDES
 	bool
 
-config SYS_FSL_DDR
-	bool "Freescale DDR driver"
-	help
-	  Select Freescale General DDR driver, shared between most Freescale
-	  PowerPC- based SoCs (such as mpc83xx, mpc85xx, mpc86xx) and ARM-
-	  based Layerscape SoCs (such as ls2080a).
-
-config SYS_FSL_DDR_BE
-	bool
-	help
-	  Access DDR registers in big-endian.
-
-config SYS_FSL_DDR_LE
-	bool
-	help
-	  Access DDR registers in little-endian.
-
-config SYS_FSL_DDR_VER
-	int
-	default 50 if SYS_FSL_DDR_VER_50
-
-config SYS_FSL_DDR_VER_50
-	bool
-
-config SYS_FSL_DDRC_ARM_GEN3
-	bool
-
-config SYS_FSL_DDRC_GEN4
-	bool
-
-config SYS_FSL_DDR3
-	bool "Freescale DDR3 controller"
-	depends on !SYS_FSL_DDR4
-	select SYS_FSL_DDR
-	select SYS_FSL_DDRC_ARM_GEN3
-	help
-	  Enable Freescale DDR3 controller on ARM-based SoCs.
-
-config SYS_FSL_DDR4
-	bool "Freescale DDR4 controller"
-	select SYS_FSL_DDR
-	select SYS_FSL_DDRC_GEN4
-	help
-	  Enable Freescale DDR4 controller.
-
 endmenu
+
+config SYS_FSL_ERRATUM_A008336
+	bool
+
+config SYS_FSL_ERRATUM_A008514
+	bool
+
+config SYS_FSL_ERRATUM_A008585
+	bool
+
+config SYS_FSL_ERRATUM_A008850
+	bool
+
+config SYS_FSL_ERRATUM_A009635
+	bool
+
+config SYS_FSL_ERRATUM_A009660
+	bool
+
+config SYS_FSL_ERRATUM_A009929
+	bool

arch/arm/cpu/armv8/fsl-layerscape/Makefile

@@ -28,6 +28,7 @@ endif
 
 ifneq ($(CONFIG_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
+obj-$(CONFIG_ARMV8_PSCI) += ls1043a_psci.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1012A),)

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -410,7 +410,8 @@ int arch_early_init_r(void)
 	erratum_a009942_check_cpo();
 #endif
 #ifdef CONFIG_MP
-#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \
+	defined(CONFIG_FSL_PPA_ARMV8_PSCI)
 	/* Check the psci version to determine if the psci is supported */
 	psci_ver = sec_firmware_support_psci_version();
 #endif

arch/arm/cpu/armv8/fsl-layerscape/fdt.c

@@ -42,7 +42,8 @@ void ft_fixup_cpu(void *blob)
 	int addr_cells;
 	u64 val, core_id;
 	size_t *boot_code_size = &(__secondary_boot_code_size);
-#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && defined(CONFIG_ARMV8_PSCI)
+#if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \
+	defined(CONFIG_FSL_PPA_ARMV8_PSCI)
 	int node;
 	u32 psci_ver;
 

arch/arm/cpu/armv8/fsl-layerscape/ls1043a_psci.S

@@ -0,0 +1,20 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/psci.h>
+
+	.pushsection ._secure.text, "ax"
+
+.globl	psci_version
+psci_version:
+	ldr	w0, =0x00010000		/* PSCI v1.0 */
+	ret
+
+	.popsection

arch/arm/cpu/armv8/psci.S

@@ -0,0 +1,286 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Author: Hongbo Zhang <hongbo.zhang@nxp.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ * This file implements LS102X platform PSCI SYSTEM-SUSPEND function
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/psci.h>
+
+/* Default PSCI function, return -1, Not Implemented */
+#define PSCI_DEFAULT(__fn) \
+	ENTRY(__fn); \
+	mov	w0, #ARM_PSCI_RET_NI; \
+	ret; \
+	ENDPROC(__fn); \
+	.weak __fn
+
+/* PSCI function and ID table definition*/
+#define PSCI_TABLE(__id, __fn) \
+	.word __id; \
+	.word __fn
+
+.pushsection ._secure.text, "ax"
+
+/* 32 bits PSCI default functions */
+PSCI_DEFAULT(psci_version)
+PSCI_DEFAULT(psci_cpu_suspend)
+PSCI_DEFAULT(psci_cpu_off)
+PSCI_DEFAULT(psci_cpu_on)
+PSCI_DEFAULT(psci_affinity_info)
+PSCI_DEFAULT(psci_migrate)
+PSCI_DEFAULT(psci_migrate_info_type)
+PSCI_DEFAULT(psci_migrate_info_up_cpu)
+PSCI_DEFAULT(psci_system_off)
+PSCI_DEFAULT(psci_system_reset)
+PSCI_DEFAULT(psci_features)
+PSCI_DEFAULT(psci_cpu_freeze)
+PSCI_DEFAULT(psci_cpu_default_suspend)
+PSCI_DEFAULT(psci_node_hw_state)
+PSCI_DEFAULT(psci_system_suspend)
+PSCI_DEFAULT(psci_set_suspend_mode)
+PSCI_DEFAULT(psi_stat_residency)
+PSCI_DEFAULT(psci_stat_count)
+
+.align 3
+_psci_32_table:
+PSCI_TABLE(ARM_PSCI_FN_CPU_SUSPEND, psci_cpu_suspend)
+PSCI_TABLE(ARM_PSCI_FN_CPU_OFF, psci_cpu_off)
+PSCI_TABLE(ARM_PSCI_FN_CPU_ON, psci_cpu_on)
+PSCI_TABLE(ARM_PSCI_FN_MIGRATE, psci_migrate)
+PSCI_TABLE(ARM_PSCI_0_2_FN_PSCI_VERSION, psci_version)
+PSCI_TABLE(ARM_PSCI_0_2_FN_CPU_SUSPEND, psci_cpu_suspend)
+PSCI_TABLE(ARM_PSCI_0_2_FN_CPU_OFF, psci_cpu_off)
+PSCI_TABLE(ARM_PSCI_0_2_FN_CPU_ON, psci_cpu_on)
+PSCI_TABLE(ARM_PSCI_0_2_FN_AFFINITY_INFO, psci_affinity_info)
+PSCI_TABLE(ARM_PSCI_0_2_FN_MIGRATE, psci_migrate)
+PSCI_TABLE(ARM_PSCI_0_2_FN_MIGRATE_INFO_TYPE, psci_migrate_info_type)
+PSCI_TABLE(ARM_PSCI_0_2_FN_MIGRATE_INFO_UP_CPU, psci_migrate_info_up_cpu)
+PSCI_TABLE(ARM_PSCI_0_2_FN_SYSTEM_OFF, psci_system_off)
+PSCI_TABLE(ARM_PSCI_0_2_FN_SYSTEM_RESET, psci_system_reset)
+PSCI_TABLE(ARM_PSCI_1_0_FN_PSCI_FEATURES, psci_features)
+PSCI_TABLE(ARM_PSCI_1_0_FN_CPU_FREEZE, psci_cpu_freeze)
+PSCI_TABLE(ARM_PSCI_1_0_FN_CPU_DEFAULT_SUSPEND, psci_cpu_default_suspend)
+PSCI_TABLE(ARM_PSCI_1_0_FN_NODE_HW_STATE, psci_node_hw_state)
+PSCI_TABLE(ARM_PSCI_1_0_FN_SYSTEM_SUSPEND, psci_system_suspend)
+PSCI_TABLE(ARM_PSCI_1_0_FN_SET_SUSPEND_MODE, psci_set_suspend_mode)
+PSCI_TABLE(ARM_PSCI_1_0_FN_STAT_RESIDENCY, psi_stat_residency)
+PSCI_TABLE(ARM_PSCI_1_0_FN_STAT_COUNT, psci_stat_count)
+PSCI_TABLE(0, 0)
+
+/* 64 bits PSCI default functions */
+PSCI_DEFAULT(psci_cpu_suspend_64)
+PSCI_DEFAULT(psci_cpu_on_64)
+PSCI_DEFAULT(psci_affinity_info_64)
+PSCI_DEFAULT(psci_migrate_64)
+PSCI_DEFAULT(psci_migrate_info_up_cpu_64)
+PSCI_DEFAULT(psci_cpu_default_suspend_64)
+PSCI_DEFAULT(psci_node_hw_state_64)
+PSCI_DEFAULT(psci_system_suspend_64)
+PSCI_DEFAULT(psci_stat_residency_64)
+PSCI_DEFAULT(psci_stat_count_64)
+
+.align 3
+_psci_64_table:
+PSCI_TABLE(ARM_PSCI_0_2_FN64_CPU_SUSPEND, psci_cpu_suspend_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_CPU_ON, psci_cpu_on_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_AFFINITY_INFO, psci_affinity_info_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_MIGRATE, psci_migrate_64)
+PSCI_TABLE(ARM_PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU, psci_migrate_info_up_cpu_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_CPU_DEFAULT_SUSPEND, psci_cpu_default_suspend_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_NODE_HW_STATE, psci_node_hw_state_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_SYSTEM_SUSPEND, psci_system_suspend_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_STAT_RESIDENCY, psci_stat_residency_64)
+PSCI_TABLE(ARM_PSCI_1_0_FN64_STAT_COUNT, psci_stat_count_64)
+PSCI_TABLE(0, 0)
+
+.macro	psci_enter
+	/* PSCI call is Fast Call(atomic), so mask DAIF */
+	mrs	x15, DAIF
+	stp	x15, xzr, [sp, #-16]!
+	ldr	x15, =0x3C0
+	msr	DAIF, x15
+	/* SMC convention, x18 ~ x30 should be saved by callee */
+	stp	x29, x30, [sp, #-16]!
+	stp	x27, x28, [sp, #-16]!
+	stp	x25, x26, [sp, #-16]!
+	stp	x23, x24, [sp, #-16]!
+	stp	x21, x22, [sp, #-16]!
+	stp	x19, x20, [sp, #-16]!
+	mrs	x15, elr_el3
+	stp	x18, x15, [sp, #-16]!
+.endm
+
+.macro	psci_return
+	/* restore registers */
+	ldp	x18, x15, [sp], #16
+	msr	elr_el3, x15
+	ldp	x19, x20, [sp], #16
+	ldp	x21, x22, [sp], #16
+	ldp	x23, x24, [sp], #16
+	ldp	x25, x26, [sp], #16
+	ldp	x27, x28, [sp], #16
+	ldp	x29, x30, [sp], #16
+	/* restore DAIF */
+	ldp	x15, xzr, [sp], #16
+	msr	DAIF, x15
+	eret
+.endm
+
+/* Caller must put PSCI function-ID table base in x9 */
+handle_psci:
+	psci_enter
+1:	ldr x10, [x9]			/* Load PSCI function table */
+	ubfx x11, x10, #32, #32
+	ubfx x10, x10, #0, #32
+	cbz	x10, 3f			/* If reach the end, bail out */
+	cmp	x10, x0
+	b.eq	2f			/* PSCI function found */
+	add x9, x9, #8			/* If not match, try next entry */
+	b	1b
+
+2:	blr	x11			/* Call PSCI function */
+	psci_return
+
+3:	mov	x0, #ARM_PSCI_RET_NI
+	psci_return
+
+unknown_smc_id:
+	ldr	x0, =0xFFFFFFFF
+	eret
+
+handle_smc32:
+	/* SMC function ID  0x84000000-0x8400001F: 32 bits PSCI */
+	ldr	w9, =0x8400001F
+	cmp	w0, w9
+	b.gt	unknown_smc_id
+	ldr	w9, =0x84000000
+	cmp	w0, w9
+	b.lt	unknown_smc_id
+
+	adr	x9, _psci_32_table
+	b	handle_psci
+
+handle_smc64:
+	/* check SMC32 or SMC64 calls */
+	ubfx	x9, x0, #30, #1
+	cbz	x9, handle_smc32
+
+	/* SMC function ID 0xC4000000-0xC400001F: 64 bits PSCI */
+	ldr	x9, =0xC400001F
+	cmp	x0, x9
+	b.gt	unknown_smc_id
+	ldr	x9, =0xC4000000
+	cmp	x0, x9
+	b.lt	unknown_smc_id
+
+	adr	x9, _psci_64_table
+	b	handle_psci
+
+/*
+ * Get CPU ID from MPIDR, suppose every cluster has same number of CPU cores,
+ * Platform with asymmetric clusters should implement their own interface.
+ * In case this function being called by other platform's C code, the ARM
+ * Architecture Procedure Call Standard is considered, e.g. register X0 is
+ * used for the return value, while in this PSCI environment, X0 usually holds
+ * the SMC function identifier, so X0 should be saved by caller function.
+ */
+ENTRY(psci_get_cpu_id)
+#ifdef CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER
+	mrs	x9, MPIDR_EL1
+	ubfx	x9, x9, #8, #8
+	ldr	x10, =CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER
+	mul	x9, x10, x9
+#else
+	mov	x9, xzr
+#endif
+	mrs	x10, MPIDR_EL1
+	ubfx	x10, x10, #0, #8
+	add	x0, x10, x9
+	ret
+ENDPROC(psci_get_cpu_id)
+.weak psci_get_cpu_id
+
+/* CPU ID input in x0, stack top output in x0*/
+LENTRY(psci_get_cpu_stack_top)
+	adr	x9, __secure_stack_end
+	lsl	x0, x0, #ARM_PSCI_STACK_SHIFT
+	sub	x0, x9, x0
+	ret
+ENDPROC(psci_get_cpu_stack_top)
+
+unhandled_exception:
+	b	unhandled_exception	/* simply dead loop */
+
+handle_sync:
+	mov	x15, x30
+	mov	x14, x0
+
+	bl	psci_get_cpu_id
+	bl	psci_get_cpu_stack_top
+	mov	x9, #1
+	msr	spsel, x9
+	mov	sp, x0
+
+	mov	x0, x14
+	mov	x30, x15
+
+	mrs	x9, esr_el3
+	ubfx	x9, x9, #26, #6
+	cmp	x9, #0x13
+	b.eq	handle_smc32
+	cmp	x9, #0x17
+	b.eq	handle_smc64
+
+	b	unhandled_exception
+
+	.align	11
+	.globl	el3_exception_vectors
+el3_exception_vectors:
+	b	unhandled_exception	/* Sync, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* IRQ, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* FIQ, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* SError, Current EL using SP0 */
+	.align	7
+	b	unhandled_exception	/* Sync, Current EL using SPx */
+	.align	7
+	b	unhandled_exception	/* IRQ, Current EL using SPx */
+	.align	7
+	b	unhandled_exception	/* FIQ, Current EL using SPx */
+	.align	7
+	b	unhandled_exception	/* SError, Current EL using SPx */
+	.align	7
+	b	handle_sync		/* Sync, Lower EL using AArch64 */
+	.align	7
+	b	unhandled_exception	/* IRQ, Lower EL using AArch64 */
+	.align	7
+	b	unhandled_exception	/* FIQ, Lower EL using AArch64 */
+	.align	7
+	b	unhandled_exception	/* SError, Lower EL using AArch64 */
+	.align	7
+	b	unhandled_exception	/* Sync, Lower EL using AArch32 */
+	.align	7
+	b	unhandled_exception	/* IRQ, Lower EL using AArch32 */
+	.align	7
+	b	unhandled_exception	/* FIQ, Lower EL using AArch32 */
+	.align	7
+	b	unhandled_exception	/* SError, Lower EL using AArch32 */
+
+ENTRY(psci_setup_vectors)
+	adr	x0, el3_exception_vectors
+	msr	vbar_el3, x0
+	ret
+ENDPROC(psci_setup_vectors)
+
+ENTRY(psci_arch_init)
+	ret
+ENDPROC(psci_arch_init)
+.weak psci_arch_init
+
+.popsection

arch/arm/cpu/armv8/sec_firmware.c

@@ -209,7 +209,7 @@ __weak bool sec_firmware_is_valid(const void *sec_firmware_img)
 	return true;
 }
 
-#ifdef CONFIG_ARMV8_PSCI
+#ifdef CONFIG_FSL_PPA_ARMV8_PSCI
 /*
  * The PSCI_VERSION function is added from PSCI v0.2. When the PSCI
  * v0.1 received this function, the NOT_SUPPORTED (0xffff_ffff) error

arch/arm/cpu/armv8/sec_firmware_asm.S

@@ -41,7 +41,7 @@ WEAK(_sec_firmware_entry)
         ret
 ENDPROC(_sec_firmware_entry)
 
-#ifdef CONFIG_ARMV8_PSCI
+#ifdef CONFIG_FSL_PPA_ARMV8_PSCI
 ENTRY(_sec_firmware_support_psci_version)
 	mov	x0, 0x84000000
 	mov	x1, 0x0

arch/arm/cpu/armv8/u-boot.lds

@@ -8,11 +8,17 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <config.h>
+#include <asm/psci.h>
+
 OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
 OUTPUT_ARCH(aarch64)
 ENTRY(_start)
 SECTIONS
 {
+#ifdef CONFIG_ARMV8_SECURE_BASE
+	/DISCARD/ : { *(.rela._secure*) }
+#endif
 	. = 0x00000000;
 
 	. = ALIGN(8);
@@ -23,6 +29,57 @@ SECTIONS
 		*(.text*)
 	}
 
+#ifdef CONFIG_ARMV8_PSCI
+	.__secure_start :
+#ifndef CONFIG_ARMV8_SECURE_BASE
+		ALIGN(CONSTANT(COMMONPAGESIZE))
+#endif
+	{
+		KEEP(*(.__secure_start))
+	}
+
+#ifndef CONFIG_ARMV8_SECURE_BASE
+#define CONFIG_ARMV8_SECURE_BASE
+#define __ARMV8_PSCI_STACK_IN_RAM
+#endif
+	.secure_text CONFIG_ARMV8_SECURE_BASE :
+		AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
+	{
+		*(._secure.text)
+	}
+
+	.secure_data : AT(LOADADDR(.secure_text) + SIZEOF(.secure_text))
+	{
+		*(._secure.data)
+	}
+
+	.secure_stack ALIGN(ADDR(.secure_data) + SIZEOF(.secure_data),
+			    CONSTANT(COMMONPAGESIZE)) (NOLOAD) :
+#ifdef __ARMV8_PSCI_STACK_IN_RAM
+		AT(ADDR(.secure_stack))
+#else
+		AT(LOADADDR(.secure_data) + SIZEOF(.secure_data))
+#endif
+	{
+		KEEP(*(.__secure_stack_start))
+
+		. = . + CONFIG_ARMV8_PSCI_NR_CPUS * ARM_PSCI_STACK_SIZE;
+
+		. = ALIGN(CONSTANT(COMMONPAGESIZE));
+
+		KEEP(*(.__secure_stack_end))
+	}
+
+#ifndef __ARMV8_PSCI_STACK_IN_RAM
+	. = LOADADDR(.secure_stack);
+#endif
+
+	.__secure_end : AT(ADDR(.__secure_end)) {
+		KEEP(*(.__secure_end))
+		LONG(0x1d1071c);	/* Must output something to reset LMA */
+	}
+#endif
+
 	. = ALIGN(8);
 	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
 

arch/arm/cpu/armv8/zynqmp/Kconfig

@@ -43,6 +43,7 @@ config SYS_CONFIG_NAME
 
 config BOOT_INIT_FILE
 	string "boot.bin init register filename"
+	depends on SPL
 	default ""
 	help
 	  Add register writes to boot.bin format (max 256 pairs).

arch/arm/dts/Makefile

@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
 	socfpga_cyclone5_mcvevk.dtb			\
 	socfpga_cyclone5_socdk.dtb			\
 	socfpga_cyclone5_de0_nano_soc.dtb			\
+	socfpga_cyclone5_de1_soc.dtb			\
 	socfpga_cyclone5_sockit.dtb			\
 	socfpga_cyclone5_socrates.dtb			\
 	socfpga_cyclone5_sr1500.dtb			\
@@ -292,9 +293,15 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
 	pcm052.dtb \
 	bk4r1.dtb
 
+dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
+
 dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \
+	imx6sll-evk.dtb \
 	imx6dl-icore.dtb \
-	imx6q-icore.dtb
+	imx6dl-icore-rqs.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6ul-geam-kit.dtb
 
 dtb-$(CONFIG_MX7) += imx7-colibri.dtb
 

arch/arm/dts/am437x-idk-evm.dts

@@ -341,7 +341,7 @@
 
 	spi-max-frequency = <48000000>;
 	m25p80@0 {
-		compatible = "mx66l51235l";
+		compatible = "mx66l51235l", "spi-flash";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
 		spi-cpol;

arch/arm/dts/armada-7040-db.dts

@@ -66,36 +66,14 @@
 	};
 };
 
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x200000>;
-			};
-			partition@400000 {
-				label = "Filesystem";
-				reg = <0x200000 0xce0000>;
-			};
-		};
-	};
+&ap_pinctl {
+	   /* MPP Bus:
+	    * SDIO  [0-5]
+	    * UART0 [11,19]
+	    */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 0 0 0 0
+		     0 3 0 0 0 0 0 0 0 3 >;
 };
 
 &uart0 {
@@ -108,11 +86,37 @@
 };
 
 &cpm_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_i2c0_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
+&cpm_pinctl {
+		/* MPP Bus:
+		 * TDM	 [0-11]
+		 * SPI   [13-16]
+		 * SATA1 [28]
+		 * UART0 [29-30]
+		 * SMI	 [32,34]
+		 * XSMI  [35-36]
+		 * I2C	 [37-38]
+		 * RGMII1[44-55]
+		 * SD	 [56-62]
+		 */
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 4   4   4   4   4   4   4   4   4   4
+		     4   4   0   3   3   3   3   0   0   0
+		     0   0   0   0   0   0   0   0   9   0xA
+		     0xA 0   7   0   7   7   7   2   2   0
+		     0   0   0   0   1   1   1   1   1   1
+		     1   1   1   1   1   1   0xE 0xE 0xE 0xE
+		     0xE 0xE 0xE >;
+};
+
 &cpm_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_spi0_pins>;
 	status = "okay";
 
 	spi-flash@0 {

arch/arm/dts/armada-8040-db.dts

@@ -57,7 +57,7 @@
 
 	aliases {
 		i2c0 = &cpm_i2c0;
-		spi0 = &spi0;
+		spi0 = &cps_spi1;
 	};
 
 	memory@00000000 {
@@ -66,12 +66,99 @@
 	};
 };
 
-&i2c0 {
+/* Accessible over the mini-USB CON9 connector on the main board */
+&uart0 {
+	status = "okay";
+};
+
+&ap_pinctl {
+	/* MPP Bus:
+	 * SDIO  [0-10]
+	 * UART0 [11,19]
+	 */
+		  /* 0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 0 0 0 0 0 0 0 3 >;
+};
+
+&cpm_pinctl {
+	/* MPP Bus:
+	 * [0-31] = 0xff: Keep default CP0_shared_pins:
+	 * [11] CLKOUT_MPP_11 (out)
+	 * [23] LINK_RD_IN_CP2CP (in)
+	 * [25] CLKOUT_MPP_25 (out)
+	 * [29] AVS_FB_IN_CP2CP (in)
+	 * [32,34] SMI
+	 * [31]    GPIO: push button/Wake
+	 * [35-36] GPIO
+	 * [37-38] I2C
+	 * [40-41] SATA[0/1]_PRESENT_ACTIVEn
+	 * [42-43] XSMI
+	 * [44-55] RGMII1
+	 * [56-62] SD
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0    7    0    7    0    0    2    2    0
+		     0    0    8    8    1    1    1    1    1    1
+		     1    1    1    1    1    1    0xe  0xe  0xe  0xe
+		     0xe  0xe  0xe >;
+};
+
+/* CON5 on CP0 expansion */
+&cpm_pcie2 {
+	status = "okay";
+};
+
+&cpm_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpm_i2c0_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
-&spi0 {
+/* CON4 on CP0 expansion */
+&cpm_sata0 {
+	status = "okay";
+};
+
+/* CON9 on CP0 expansion */
+&cpm_usb3_0 {
+	status = "okay";
+};
+
+/* CON10 on CP0 expansion */
+&cpm_usb3_1 {
+	status = "okay";
+};
+
+&cps_pinctl {
+	/* MPP Bus:
+	 * [0-11]  RGMII0
+	 * [13-16] SPI1
+	 * [27,31] GE_MDIO/MDC
+	 * [32-62] = 0xff: Keep default CP1_shared_pins:
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x3  0x3  0x3  0x3  0x3  0x3  0x3  0x3  0x3  0x3
+		     0x3  0x3  0xff 0x3  0x3  0x3  0x3  0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8  0xff 0xff
+		     0xff 0x8  0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+		     0xff 0xff 0xff >;
+};
+
+/* CON5 on CP1 expansion */
+&cps_pcie2 {
+	status = "okay";
+};
+
+&cps_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cps_spi1_pins>;
 	status = "okay";
 
 	spi-flash@0 {
@@ -98,47 +185,6 @@
 	};
 };
 
-/* Accessible over the mini-USB CON9 connector on the main board */
-&uart0 {
-	status = "okay";
-};
-
-
-/* CON5 on CP0 expansion */
-&cpm_pcie2 {
-	status = "okay";
-};
-
-&cpm_i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-/* CON4 on CP0 expansion */
-&cpm_sata0 {
-	status = "okay";
-};
-
-/* CON9 on CP0 expansion */
-&cpm_usb3_0 {
-	status = "okay";
-};
-
-/* CON10 on CP0 expansion */
-&cpm_usb3_1 {
-	status = "okay";
-};
-
-/* CON5 on CP1 expansion */
-&cps_pcie2 {
-	status = "okay";
-};
-
-&cps_i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
 /* CON4 on CP1 expansion */
 &cps_sata0 {
 	status = "okay";

arch/arm/dts/armada-ap806.dtsi

@@ -140,6 +140,24 @@
 				marvell,spi-base = <128>, <136>, <144>, <152>;
 			};
 
+			ap_pinctl: ap-pinctl@6F4000 {
+				compatible = "marvell,armada-ap806-pinctrl";
+				bank-name ="apn-806";
+				reg = <0x6F4000 0x10>;
+				pin-count = <20>;
+				max-func = <3>;
+
+				ap_i2c0_pins: i2c-pins-0 {
+					marvell,pins = < 4 5 >;
+					marvell,function = <3>;
+				};
+				ap_emmc_pins: emmc-pins-0 {
+					marvell,pins = < 0 1 2 3 4 5 6 7
+							 8 9 10 >;
+					marvell,function = <1>;
+				};
+			};
+
 			xor@400000 {
 				compatible = "marvell,mv-xor-v2";
 				reg = <0x400000 0x1000>,

arch/arm/dts/armada-cp110-master.dtsi

@@ -81,6 +81,38 @@
 					"cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 			};
 
+			cpm_pinctl: cpm-pinctl@440000 {
+				compatible = "marvell,mvebu-pinctrl",
+					     "marvell,a70x0-pinctrl",
+					     "marvell,a80x0-cp0-pinctrl";
+				bank-name ="cp0-110";
+				reg = <0x440000 0x20>;
+				pin-count = <63>;
+				max-func = <0xf>;
+
+				cpm_i2c0_pins: cpm-i2c-pins-0 {
+					marvell,pins = < 37 38 >;
+					marvell,function = <2>;
+				};
+				cpm_ge2_rgmii_pins: cpm-ge-rgmii-pins-0 {
+					marvell,pins = < 44 45 46 47 48 49 50 51
+							 52 53 54 55 >;
+					marvell,function = <1>;
+				};
+				pca0_pins: cpm-pca0_pins {
+					marvell,pins = <62>;
+					marvell,function = <0>;
+				};
+				cpm_sdhci_pins: cpm-sdhi-pins-0 {
+					marvell,pins = < 56 57 58 59 60 61 >;
+					marvell,function = <14>;
+				};
+				cpm_spi0_pins: cpm-spi-pins-0 {
+					marvell,pins = < 13 14 15 16 >;
+					marvell,function = <3>;
+				};
+			};
+
 			cpm_sata0: sata@540000 {
 				compatible = "marvell,armada-8k-ahci";
 				reg = <0x540000 0x30000>;

arch/arm/dts/armada-cp110-slave.dtsi

@@ -81,6 +81,25 @@
 					"cps-usb3dev", "cps-eip150", "cps-eip197";
 			};
 
+			cps_pinctl: cps-pinctl@440000 {
+				compatible = "marvell,mvebu-pinctrl",
+					     "marvell,a80x0-cp1-pinctrl";
+				bank-name ="cp1-110";
+				reg = <0x440000 0x20>;
+				pin-count = <63>;
+				max-func = <0xf>;
+
+				cps_ge1_rgmii_pins: cps-ge-rgmii-pins-0 {
+					marvell,pins = < 0  1  2  3  4  5  6  7
+							 8  9  10 11 >;
+					marvell,function = <3>;
+				};
+				cps_spi1_pins: cps-spi-pins-1 {
+					marvell,pins = < 13 14 15 16 >;
+					marvell,function = <3>;
+				};
+			};
+
 			cps_sata0: sata@540000 {
 				compatible = "marvell,armada-8k-ahci";
 				reg = <0x540000 0x30000>;

arch/arm/dts/fsl-ls1043a-qds.dtsi

@@ -135,8 +135,8 @@
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor@0,0 {
@@ -148,21 +148,21 @@
 		device-width = <1>;
 	};
 
-	nand@2,0 {
+	nand@1,0 {
 		compatible = "fsl,ifc-nand";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x1 0x0 0x10000>;
 	};
 
-	fpga: board-control@3,0 {
+	fpga: board-control@2,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		reg = <0x3 0x0 0x0000100>;
+		reg = <0x2 0x0 0x0000100>;
 		bank-width = <1>;
 		device-width = <1>;
-		ranges = <0 3 0 0x100>;
+		ranges = <0 2 0 0x100>;
 	};
 };
 

arch/arm/dts/fsl-ls1043a-rdb.dts

@@ -47,12 +47,12 @@
 		compatible = "adi,adt7461a";
 		reg = <0x4c>;
 	};
-	eeprom@56 {
+	eeprom@52 {
 		compatible = "at24,24c512";
 		reg = <0x52>;
 	};
 
-	eeprom@57 {
+	eeprom@53 {
 		compatible = "at24,24c512";
 		reg = <0x53>;
 	};
@@ -69,8 +69,8 @@
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
 
 		nor@0,0 {
 			compatible = "cfi-flash";

arch/arm/dts/imx53-cx9020.dts

@@ -0,0 +1,190 @@
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX    0x144 0x48c 0x880 0x2 0x0
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX    0x148 0x490 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS        0x14c 0x494 0x87c 0x2 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS        0x150 0x498 0x000 0x2 0x0
+
+/ {
+	model = "Beckhoff CX9020-0100 i.MX53";
+	compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-qsb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
+				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
+				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
+				MX53_PAD_GPIO_1__GPIO1_1          0x80000000
+				MX53_PAD_GPIO_4__GPIO1_4          0x80000000
+				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
+				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
+
+				MX53_PAD_EIM_OE__EMI_WEIM_OE            0x80000000
+				MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT        0x80000000
+				MX53_PAD_EIM_LBA__EMI_WEIM_LBA          0x80000000
+				MX53_PAD_EIM_RW__EMI_WEIM_RW            0x80000000
+				MX53_PAD_EIM_EB0__EMI_WEIM_EB_0         0x80000000
+				MX53_PAD_EIM_EB1__EMI_WEIM_EB_1         0x80000000
+				MX53_PAD_EIM_EB2__EMI_WEIM_EB_2         0x80000000
+				MX53_PAD_EIM_EB3__EMI_WEIM_EB_3         0x80000000
+				MX53_PAD_EIM_CS0__EMI_WEIM_CS_0         0x80000000
+				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1         0x80000000
+				MX53_PAD_EIM_A16__EMI_WEIM_A_16         0x80000000
+				MX53_PAD_EIM_A17__EMI_WEIM_A_17         0x80000000
+				MX53_PAD_EIM_A18__EMI_WEIM_A_18         0x80000000
+				MX53_PAD_EIM_A19__EMI_WEIM_A_19         0x80000000
+				MX53_PAD_EIM_A20__EMI_WEIM_A_20         0x80000000
+				MX53_PAD_EIM_A21__EMI_WEIM_A_21         0x80000000
+				MX53_PAD_EIM_A22__EMI_WEIM_A_22         0x80000000
+				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0    0xa4
+				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1    0xa4
+				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2    0xa4
+				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3    0xa4
+				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4    0xa4
+				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5    0xa4
+				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6    0xa4
+				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7    0xa4
+				MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8    0xa4
+				MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9    0xa4
+				MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10	0xa4
+				MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11  0xa4
+				MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12  0xa4
+				MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13  0xa4
+				MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14  0xa4
+				MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15  0xa4
+				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0      0xa4
+				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1      0xa4
+				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2      0xa4
+				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3      0xa4
+				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4      0xa4
+				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5      0xa4
+				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6      0xa4
+				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7      0xa4
+				MX53_PAD_PATA_DATA8__EMI_NANDF_D_8      0xa4
+				MX53_PAD_PATA_DATA9__EMI_NANDF_D_9      0xa4
+				MX53_PAD_PATA_DATA10__EMI_NANDF_D_10    0xa4
+				MX53_PAD_PATA_DATA11__EMI_NANDF_D_11    0xa4
+				MX53_PAD_PATA_DATA12__EMI_NANDF_D_12    0xa4
+				MX53_PAD_PATA_DATA13__EMI_NANDF_D_13    0xa4
+				MX53_PAD_PATA_DATA14__EMI_NANDF_D_14    0xa4
+				MX53_PAD_PATA_DATA15__EMI_NANDF_D_15    0xa4
+				MX53_PAD_NANDF_CLE__GPIO6_7             0x00000001
+				MX53_PAD_NANDF_WP_B__GPIO6_9            0x00000001
+				MX53_PAD_NANDF_ALE__GPIO6_8             0x00000001
+
+				MX53_PAD_EIM_D23__GPIO3_23 0x80000000
+
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
+
+                                MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
+                                MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
+
+				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+				MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
+				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
+				MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+				MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+				MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+			>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	fsl,dte-mode;
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 0>;
+	status = "okay";
+};

arch/arm/dts/imx53.dtsi

@@ -0,0 +1,110 @@
+/*
+ * Copyright 2016 Beckhoff Automation
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		serial1 = &uart2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx53-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx7d-uart", "fsl,imx53-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx53-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio7: gpio@53fe4000 {
+				compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe4000 0x4000>;
+				interrupts = <107 108>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+			};
+
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/imx6dl-icore-rqs.dts

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};

arch/arm/dts/imx6q-icore-rqs.dts

@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};

arch/arm/dts/imx6qdl-icore-rqs.dtsi

@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		eth_phy: ethernet-phy {
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+		>;
+	};
+};

arch/arm/dts/imx6qdl-icore.dtsi

@@ -75,6 +75,14 @@
 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -118,6 +126,22 @@
 };
 
 &iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020

arch/arm/dts/imx6sll-evk.dts

@@ -0,0 +1,801 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	battery: max8903@0 {
+		compatible = "fsl,max8903-charger";
+		pinctrl-names = "default";
+		dok_input = <&gpio4 13 1>;
+		uok_input = <&gpio4 13 1>;
+		chg_input = <&gpio4 15 1>;
+		flt_input = <&gpio4 14 1>;
+		fsl,dcm_always_high;
+		fsl,dc_valid;
+		fsl,adc_disable;
+		status = "okay";
+	};
+
+	pxp_v4l2_out {
+		compatible = "fsl,imx6sl-pxp-v4l2";
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+
+		reg_lcd: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-pwr";
+			gpio = <&gpio4 8 0>;
+			enable-active-high;
+		};
+
+		reg_sd1_vmmc: sd1_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "SD1_SPWR";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_sd2_vmmc: sd2_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "eMMC-VCCQ";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+		};
+
+		reg_sd3_vmmc: sd3_vmmc {
+			compatible = "regulator-fixed";
+			regulator-name = "SD3_WIFI";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		cpu-dai = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+		codec-master;
+		hp-det-gpios = <&gpio4 24 1>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <393216000>;
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	max17135: max17135@48 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_max17135>;
+		compatible = "maxim,max17135";
+		reg = <0x48>;
+		status = "okay";
+
+		vneg_pwrup = <1>;
+		gvee_pwrup = <2>;
+		vpos_pwrup = <10>;
+		gvdd_pwrup = <12>;
+		gvdd_pwrdn = <1>;
+		vpos_pwrdn = <2>;
+		gvee_pwrdn = <8>;
+		vneg_pwrdn = <10>;
+		gpio_pmic_pwrgood = <&gpio2 13 0>;
+		gpio_pmic_vcom_ctrl = <&gpio2 3 0>;
+		gpio_pmic_wakeup = <&gpio2 14 0>;
+		gpio_pmic_v3p3 = <&gpio2 7 0>;
+		gpio_pmic_intr = <&gpio2 12 0>;
+
+		regulators {
+			DISPLAY_reg: DISPLAY {
+				regulator-name = "DISPLAY";
+			};
+
+			GVDD_reg: GVDD {
+				/* 20v */
+				regulator-name = "GVDD";
+			};
+
+			GVEE_reg: GVEE {
+				/* -22v */
+				regulator-name = "GVEE";
+			};
+
+			HVINN_reg: HVINN {
+				/* -22v */
+				regulator-name = "HVINN";
+			};
+
+			HVINP_reg: HVINP {
+				/* 20v */
+				regulator-name = "HVINP";
+			};
+
+			VCOM_reg: VCOM {
+				regulator-name = "VCOM";
+				/* 2's-compliment, -4325000 */
+				regulator-min-microvolt = <0xffbe0178>;
+				/* 2's-compliment, -500000 */
+				regulator-max-microvolt = <0xfff85ee0>;
+			};
+
+			VNEG_reg: VNEG {
+				/* -15v */
+				regulator-name = "VNEG";
+			};
+
+			VPOS_reg: VPOS {
+				/* 15v */
+				regulator-name = "VPOS";
+			};
+
+			V3P3_reg: V3P3 {
+				regulator-name = "V3P3";
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SLL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+		amic-mono;
+	};
+};
+
+&gpc {
+	fsl,ldo-bypass = <1>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6sll-evk {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x17059
+				MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x17059
+				MX6SLL_PAD_KEY_COL3__GPIO3_IO30	0x17059
+				/*
+				 * Must set the LVE of pad SD2_RESET, otherwise current
+				 * leakage through eMMC chip will pull high the VCCQ to
+				 * 2.6v, which will impact SD1 and SD3 SD3.0 voltage switch.
+				 */
+				MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x417059
+				MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+				MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 /* SD3 CD */
+				MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 /*SD3 RESET */
+				MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+				MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x17059 /* HP DETECT */
+				/* CHG_FLT, CHG_UOK/DOK, CHG_STATUS */
+				MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x17000
+				MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x17000
+				MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15  0x17000
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SLL_PAD_AUD_TXC__AUD3_TXC		0x4130b0
+				MX6SLL_PAD_AUD_TXFS__AUD3_TXFS		0x4130b0
+				MX6SLL_PAD_AUD_TXD__AUD3_TXD		0x4110b0
+				MX6SLL_PAD_AUD_RXD__AUD3_RXD		0x4130b0
+				MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT	0x4130b0
+			>;
+		};
+
+		pinctrl_csi1: csi1grp {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_GDRL__CSI_MCLK		0x1b088
+				MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK	0x1b088
+				MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC		0x1b088
+				MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC		0x1b088
+				MX6SLL_PAD_EPDC_DATA02__CSI_DATA02	0x1b088
+				MX6SLL_PAD_EPDC_DATA03__CSI_DATA03	0x1b088
+				MX6SLL_PAD_EPDC_DATA04__CSI_DATA04	0x1b088
+				MX6SLL_PAD_EPDC_DATA05__CSI_DATA05	0x1b088
+				MX6SLL_PAD_EPDC_DATA06__CSI_DATA06	0x1b088
+				MX6SLL_PAD_EPDC_DATA07__CSI_DATA07	0x1b088
+				MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08	0x1b088
+				MX6SLL_PAD_EPDC_SDLE__CSI_DATA09	0x1b088
+				MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26	0x80000000
+				MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25	0x80000000
+			>;
+		};
+
+                pinctrl_epdc0: epdcgrp0 {
+                        fsl,pins = <
+				MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00	0x100b1
+				MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01	0x100b1
+				MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02	0x100b1
+				MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03	0x100b1
+				MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04	0x100b1
+				MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05	0x100b1
+				MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06	0x100b1
+				MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07	0x100b1
+				MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08	0x100b1
+				MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09	0x100b1
+				MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10	0x100b1
+				MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11	0x100b1
+				MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12	0x100b1
+				MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13	0x100b1
+				MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14	0x100b1
+				MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15	0x100b1
+				MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P	0x100b1
+				MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE		0x100b1
+				MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE		0x100b1
+				MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR	0x100b1
+				MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0	0x100b1
+				MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK	0x100b1
+				MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE		0x100b1
+				MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL		0x100b1
+				MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP		0x100b1
+                       >;
+                };
+
+		pinctrl_lcdif_dat: lcdifdatgrp {
+			fsl,pins = <
+				MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+				MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+				MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+				MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+				MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+				MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+				MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+				MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+				MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+				MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+				MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+				MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+				MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+				MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+				MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+				MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+				MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+				MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+				MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+				MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+				MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+				MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+				MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+				MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			>;
+		};
+
+		pinctrl_lcdif_ctrl: lcdifctrlgrp {
+			fsl,pins = <
+				MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+				MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+				MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+				MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+				MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+				MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08	0x79
+			>;
+		};
+
+		pinctrl_max17135: max17135grp-1 {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13	0x80000000  /* pwrgood */
+				MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03	0x80000000  /* vcom_ctrl */
+				MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14	0x80000000  /* wakeup */
+				MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07	0x80000000  /* v3p3 */
+				MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12	0x80000000  /* pwr int */
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+				MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x1b0b1  /* bt reg on */
+				MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x1b0b1
+				MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5dte: uart5dtegrp {
+			fsl,pins = <
+				MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x1b0b1
+				MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x1b0b1
+				MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+				MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+				MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+				MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+				MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+				MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x13059
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x17059
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x17059
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x17059
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x17059
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x17059
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x17059
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x17059
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x17059
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x413059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130b9
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x170b9
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170b9
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170b9
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170b9
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170b9
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170b9
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170b9
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170b9
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SLL_PAD_SD2_CLK__SD2_CLK		0x130f9
+				MX6SLL_PAD_SD2_DATA0__SD2_DATA0 	0x170f9
+				MX6SLL_PAD_SD2_DATA1__SD2_DATA1		0x170f9
+				MX6SLL_PAD_SD2_DATA2__SD2_DATA2		0x170f9
+				MX6SLL_PAD_SD2_DATA3__SD2_DATA3		0x170f9
+				MX6SLL_PAD_SD2_DATA4__SD2_DATA4		0x170f9
+				MX6SLL_PAD_SD2_DATA5__SD2_DATA5		0x170f9
+				MX6SLL_PAD_SD2_DATA6__SD2_DATA6		0x170f9
+				MX6SLL_PAD_SD2_DATA7__SD2_DATA7		0x170f9
+				MX6SLL_PAD_GPIO4_IO21__SD2_STROBE	0x4130f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x17059
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x13059
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x17059
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x17059
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x17059
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170b9
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x130b9
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170b9
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170b9
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170b9
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX6SLL_PAD_SD3_CMD__SD3_CMD	0x170f9
+				MX6SLL_PAD_SD3_CLK__SD3_CLK	0x130f9
+				MX6SLL_PAD_SD3_DATA0__SD3_DATA0	0x170f9
+				MX6SLL_PAD_SD3_DATA1__SD3_DATA1	0x170f9
+				MX6SLL_PAD_SD3_DATA2__SD3_DATA2	0x170f9
+				MX6SLL_PAD_SD3_DATA3__SD3_DATA3	0x170f9
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+				MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SLL_PAD_AUD_RXFS__I2C3_SCL  0x4041b8b1
+				MX6SLL_PAD_AUD_RXC__I2C3_SDA   0x4041b8b1
+			>;
+		};
+
+		pinctrl_pwm1: pmw1grp {
+			fsl,pins = <
+				MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+			>;
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display>;
+	status = "okay";
+
+	display: display {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pxp {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,uart-has-rtscts;
+	/* for DTE mode, add below change */
+	/* fsl,dte-mode; */
+	/* pinctrl-0 = <&pinctrl_uart5dte>; */
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vqmmc-supply = <&reg_sd2_vmmc>;
+	bus-width = <8>;
+	no-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&epdc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_epdc0>;
+	V3P3-supply = <&V3P3_reg>;
+	VCOM-supply = <&VCOM_reg>;
+	DISPLAY-supply = <&DISPLAY_reg>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};

arch/arm/dts/imx6sll-pinfunc.h

@@ -0,0 +1,882 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */

arch/arm/dts/imx6sll.dtsi

@@ -0,0 +1,859 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1225000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1225000
+				792000          1175000
+				396000          1175000
+				198000		1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			fsl,low-power-run;
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>,
+				 <&clks IMX6SLL_CLK_PLL1>,
+				 <&clks IMX6SLL_PLL1_BYPASS>,
+				 <&clks IMX6SLL_PLL1_BYPASS_SRC>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys", "pll1", "pll1_bypass",
+				      "pll1_bypass_src";
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "ckil";
+		};
+
+		osc: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc";
+		};
+
+		ipp_di0: clock@2 {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di0";
+		};
+
+		ipp_di1: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "ipp_di1";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		busfreq {
+			compatible = "fsl,imx_busfreq";
+			clocks = <&clks IMX6SLL_CLK_PLL2_PFD2>, <&clks IMX6SLL_CLK_PLL2_198M>,
+				 <&clks IMX6SLL_CLK_PLL2_BUS>, <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL3_USB_OTG>, <&clks IMX6SLL_CLK_PERIPH>,
+				 <&clks IMX6SLL_CLK_PERIPH_PRE>, <&clks IMX6SLL_CLK_PERIPH_CLK2>,
+				 <&clks IMX6SLL_CLK_PERIPH_CLK2_SEL>, <&clks IMX6SLL_CLK_OSC>,
+				 <&clks IMX6SLL_CLK_AHB>, <&clks IMX6SLL_CLK_AXI_PODF>,
+				 <&clks IMX6SLL_CLK_PERIPH2>, <&clks IMX6SLL_CLK_PERIPH2_PRE>,
+				 <&clks IMX6SLL_CLK_PERIPH2_CLK2>, <&clks IMX6SLL_CLK_PERIPH2_CLK2_SEL>,
+				 <&clks IMX6SLL_CLK_STEP>, <&clks IMX6SLL_CLK_MMDC_P0_FAST>, <&clks IMX6SLL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6SLL_PLL1_BYPASS>, <&clks IMX6SLL_CLK_PLL1_SYS>, <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1>;
+			clock-names = "pll2_pfd2_396m", "pll2_198m", "pll2_bus", "arm", "pll3_usb_otg",
+				      "periph", "periph_pre", "periph_clk2", "periph_clk2_sel", "osc",
+				      "ahb", "ocram", "periph2", "periph2_pre", "periph2_clk2", "periph2_clk2_sel",
+				      "step", "mmdc", "pll1_bypass_src", "pll1_bypass", "pll1_sys", "pll1_sw", "pll1";
+			fsl,max_ddr_freq = <400000000>;
+		};
+
+		ocrams: sram@00900000 {
+			compatible = "fsl,lpm-sram";
+			reg = <0x00900000 0x4000>;
+		};
+
+		ocrams_ddr: sram@00904000 {
+			compatible = "fsl,ddr-lpm-sram";
+			reg = <0x00904000 0x1000>;
+		};
+
+		ocram: sram@00905000 {
+			compatible = "mmio-sram";
+			reg = <0x00905000 0x1B000>;
+		};
+
+		L2: l2-cache@00a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@02008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@02018000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@02024000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi@02028000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi2@0202c000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi@02030000 {
+					compatible = "fsl,imx6sll-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@02034000 {
+					compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6sll-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@020b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0@120 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+			};
+
+			tempmon: tempmon {
+				compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-reg_3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@020e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_SDMA>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pxp: pxp@020f0000 {
+				compatible = "fsl,imx6ull-pxp-dma", "fsl,imx7d-pxp-dma";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_PXP>;
+				clock-names = "pxp_ipg", "pxp_axi";
+				status = "disabled";
+			};
+
+			epdc: epdc@020f4000 {
+				compatible = "fsl,imx6sll-epdc", "fsl,imx7d-epdc";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_EPDC_AXI>, <&clks IMX6SLL_CLK_EPDC_PIX>;
+				clock-names = "epdc_axi", "epdc_pix";
+				status = "disabled";
+			};
+
+			lcdif: lcdif@020f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@02198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			romcp@021ac000 {
+				compatible = "fsl,imx6sll-romcp", "syscon";
+				reg = <0x021ac000 0x4000>;
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			rngb: rngb@021b4000 {
+				compatible = "fsl,imx6sl-rng", "fsl,imx-rng", "imx-rng";
+				reg = <0x021b4000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks =  <&clks IMX6SLL_CLK_DUMMY>;
+			};
+
+			ocotp: ocotp-ctrl@021bc000 {
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+			};
+
+			csu: csu@021c0000 {
+				compatible = "fsl,imx6sll-csu";
+				reg = <0x021c0000 0x4000>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			snvs_gpr: snvs-gpr@0x021c4000 {
+				compatible = "fsl, imx6sll-snvs-gpr";
+				reg = <0x021c4000 0x10000>;
+			};
+
+			iomuxc_snvs: iomuxc-snvs@021c8000 {
+				compatible = "fsl,imx6sll-iomuxc-snvs";
+				reg = <0x021c80000 0x10000>;
+			};
+
+			audmux: audmux@021d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/imx6ul-geam-kit.dts

@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Engicam GEAM6UL";
+	compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+	memory {
+		reg = <0x80000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+};

arch/arm/dts/imx6ul.dtsi

@@ -0,0 +1,942 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/imx6ul-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6ul-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		sai1 = &sai1;
+		sai2 = &sai2;
+		sai3 = &sai3;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		spi3 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			operating-points = <
+				/* kHz	uV */
+				528000	1175000
+				396000	1025000
+				198000	950000
+			>;
+			fsl,soc-operating-points = <
+				/* KHz	uV */
+				528000	1175000
+				396000	1175000
+				198000	1175000
+			>;
+			clocks = <&clks IMX6UL_CLK_ARM>,
+				 <&clks IMX6UL_CLK_PLL2_BUS>,
+				 <&clks IMX6UL_CLK_PLL2_PFD2>,
+				 <&clks IMX6UL_CA7_SECONDARY_SEL>,
+				 <&clks IMX6UL_CLK_STEP>,
+				 <&clks IMX6UL_CLK_PLL1_SW>,
+				 <&clks IMX6UL_CLK_PLL1_SYS>,
+				 <&clks IMX6UL_PLL1_BYPASS>,
+				 <&clks IMX6UL_CLK_PLL1>,
+				 <&clks IMX6UL_PLL1_BYPASS_SRC>,
+				 <&clks IMX6UL_CLK_OSC>;
+			clock-names = "arm", "pll2_bus",  "pll2_pfd2_396m",
+				      "secondary_sel", "step", "pll1_sw",
+				      "pll1_sys", "pll1_bypass", "pll1",
+				      "pll1_bypass_src", "osc";
+			arm-supply = <&reg_arm>;
+			soc-supply = <&reg_soc>;
+		};
+	};
+
+	intc: interrupt-controller@00a01000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a02000 0x1000>,
+		      <0x00a04000 0x2000>,
+		      <0x00a06000 0x2000>;
+	};
+
+	ckil: clock-cli {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		dma_apbh: dma-apbh@01804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: gpmi-nand@01806000         {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
+		aips1: aips-bus@02000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba-bus@02000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				ecspi1: ecspi@02008000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI1>,
+						 <&clks IMX6UL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: ecspi@0200c000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI2>,
+						 <&clks IMX6UL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: ecspi@02010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI3>,
+						 <&clks IMX6UL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: ecspi@02014000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ECSPI4>,
+						 <&clks IMX6UL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart7: serial@02018000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART7_IPG>,
+						 <&clks IMX6UL_CLK_UART7_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@02020000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART1_IPG>,
+						 <&clks IMX6UL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart8: serial@02024000 {
+					compatible = "fsl,imx6ul-uart",
+						     "fsl,imx6q-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_UART8_IPG>,
+						 <&clks IMX6UL_CLK_UART8_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				sai1: sai@02028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@0202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@02030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			tsc: tsc@02040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			can1: flexcan@02090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: flexcan@02094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt1: gpt@02098000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
+					 <&clks IMX6UL_CLK_GPT1_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@0209c000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 23 10>, <&iomuxc 10 17 6>,
+					      <&iomuxc 16 33 16>;
+			};
+
+			gpio2: gpio@020a0000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 49 16>, <&iomuxc 16 111 6>;
+			};
+
+			gpio3: gpio@020a4000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 65 29>;
+			};
+
+			gpio4: gpio@020a8000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 94 17>, <&iomuxc 17 117 12>;
+			};
+
+			gpio5: gpio@020ac000 {
+				compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 7 10>, <&iomuxc 10 5 2>;
+			};
+
+			fec2: ethernet@020b4000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x020b4000 0x4000>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>,
+					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: wdog@020bc000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG1>;
+			};
+
+			wdog2: wdog@020c0000 {
+				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: ccm@020c4000 {
+				compatible = "fsl,imx6ul-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+			};
+
+			anatop: anatop@020c8000 {
+				compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x1000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_3p0: regulator-3p0 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+
+				reg_arm: regulator-vddcore {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "cpu";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <0>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <24>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+
+				reg_soc: regulator-vddsoc {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vddsoc";
+					regulator-min-microvolt = <725000>;
+					regulator-max-microvolt = <1450000>;
+					regulator-always-on;
+					anatop-reg-offset = <0x140>;
+					anatop-vol-bit-shift = <18>;
+					anatop-vol-bit-width = <5>;
+					anatop-delay-reg-offset = <0x170>;
+					anatop-delay-bit-shift = <28>;
+					anatop-delay-bit-width = <2>;
+					anatop-min-bit-val = <1>;
+					anatop-min-voltage = <725000>;
+					anatop-max-voltage = <1450000>;
+				};
+			};
+
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBPHY2>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@020cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			epit1: epit@020d0000 {
+				reg = <0x020d0000 0x4000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			epit2: epit@020d4000 {
+				reg = <0x020d4000 0x4000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			src: src@020d8000 {
+				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@020dc000 {
+				compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+			};
+
+			iomuxc: iomuxc@020e0000 {
+				compatible = "fsl,imx6ul-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@020e4000 {
+				compatible = "fsl,imx6ul-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			gpt2: gpt@020e8000 {
+				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_SDMA>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			pwm5: pwm@020f0000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f0000 0x4000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm6: pwm@020f4000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f4000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm7: pwm@020f8000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm8: pwm@020fc000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips-bus@02100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@02184000 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@02184200 {
+				compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			fec1: ethernet@02188000 {
+				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
+				reg = <0x02188000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ENET>,
+					 <&clks IMX6UL_CLK_ENET_AHB>,
+					 <&clks IMX6UL_CLK_ENET_PTP>,
+					 <&clks IMX6UL_CLK_ENET_REF>,
+					 <&clks IMX6UL_CLK_ENET_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<1>;
+				fsl,num-rx-queues=<1>;
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@02190000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>,
+					 <&clks IMX6UL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@02194000 {
+				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>,
+					 <&clks IMX6UL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			adc1: adc@02198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				num-channels = <2>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@021a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@021a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@021a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			lcdif: lcdif@021c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			qspi: qspi@021e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+				reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
+				reg-names = "QuadSPI", "QuadSPI-memory";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_QSPI>,
+					 <&clks IMX6UL_CLK_QSPI>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			uart2: serial@021e8000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021e8000 0x4000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART2_IPG>,
+					 <&clks IMX6UL_CLK_UART2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@021ec000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021ec000 0x4000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART3_IPG>,
+					 <&clks IMX6UL_CLK_UART3_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@021f0000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f0000 0x4000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART4_IPG>,
+					 <&clks IMX6UL_CLK_UART4_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@021f4000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART5_IPG>,
+					 <&clks IMX6UL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c4: i2c@021f8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
+				reg = <0x021f8000 0x4000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_I2C4>;
+				status = "disabled";
+			};
+
+			uart6: serial@021fc000 {
+				compatible = "fsl,imx6ul-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x021fc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_UART6_IPG>,
+					 <&clks IMX6UL_CLK_UART6_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/dts/s5pc1xx-goni.dts

@@ -19,6 +19,7 @@
 		serial2 = "/serial@e2900800";
 		console = "/serial@e2900800";
 		pinctrl0 = &pinctrl0;
+		i2c3 = &i2c_pmic;
 	};
 
 	pinctrl0: pinctrl@e0200000 {
@@ -32,4 +33,168 @@
 		id = <2>;
 	};
 
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		pmic@66 {
+			compatible = "maxim,max8998";
+			reg = <0x66 0 0>;
+
+			voltage-regulators {
+				ldo2_reg: LDO2 {
+					regulator-compatible = "LDO2";
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-compatible = "LDO3";
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-compatible = "LDO4";
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-compatible = "LDO5";
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-compatible = "LDO6";
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-compatible = "LDO7";
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-compatible = "LDO9";
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-compatible = "LDO11";
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-compatible = "LDO12";
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-compatible = "LDO13";
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-compatible = "LDO14";
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-compatible = "LDO15";
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-compatible = "LDO16";
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-compatible = "LDO17";
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-compatible = "BUCK1";
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-compatible = "BUCK2";
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-compatible = "BUCK3";
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-compatible = "BUCK4";
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
 };

arch/arm/dts/socfpga_cyclone5_de1_soc.dts

@@ -0,0 +1,66 @@
+/*
+ * Copyright Altera Corporation (C) 2015
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic DE1-SoC";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	aliases {
+		ethernet0 = &gmac1;
+		udc0 = &usb1;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <420>;
+	rxd1-skew-ps = <420>;
+	rxd2-skew-ps = <420>;
+	rxd3-skew-ps = <420>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <1860>;
+	rxdv-skew-ps = <420>;
+	rxc-skew-ps = <1680>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	u-boot,dm-pre-reloc;
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm/dts/sunxi-u-boot.dtsi

@@ -0,0 +1,14 @@
+#include <config.h>
+
+/ {
+	binman {
+		filename = "u-boot-sunxi-with-spl.bin";
+		pad-byte = <0xff>;
+		blob {
+			filename = "spl/sunxi-spl.bin";
+		};
+		u-boot-img {
+			pos = <CONFIG_SPL_PAD_TO>;
+		};
+	};
+};

arch/arm/dts/tegra124-nyan-big-u-boot.dtsi

@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2016 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/ {
+	host1x@50000000 {
+		u-boot,dm-pre-reloc;
+		dc@54200000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};

arch/arm/dts/tegra124-nyan-big.dts

@@ -27,9 +27,7 @@
 	};
 
 	host1x@50000000 {
-		u-boot,dm-pre-reloc;
 		dc@54200000 {
-			u-boot,dm-pre-reloc;
 			display-timings {
 				timing@0 {
 					clock-frequency = <69500000>;

arch/arm/dts/tegra20-colibri.dts

@@ -16,7 +16,7 @@
 		i2c2 = "/i2c@7000c400";
 		mmc0 = "/sdhci@c8000600";
 		usb0 = "/usb@c5000000";
-		usb1 = "/usb@c5004000"; /* on-module only, for ASIX */
+		usb1 = "/usb@c5004000"; /* On-module only, for ASIX */
 		usb2 = "/usb@c5008000";
 	};
 
@@ -92,8 +92,10 @@
 	/* EHCI instance 1: ULPI -> USB3340 -> AX88772B */
 	usb@c5004000 {
 		status = "okay";
+		/* ULPI_RESET */
+		nvidia,phy-reset-gpio =
+				<&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
 		/* VBUS_LAN */
-		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
 		nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
 	};
 

arch/arm/dts/tegra20-paz00.dts

@@ -1,5 +1,6 @@
 /dts-v1/;
 
+#include <dt-bindings/input/input.h>
 #include "tegra20.dtsi"
 
 / {
@@ -11,7 +12,13 @@
 	};
 
 	aliases {
-		usb0 = "/usb@c5008000";
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+		usb0 = "/usb@c5000000";
+		usb1 = "/usb@c5004000";
+		usb2 = "/usb@c5008000";
 		mmc0 = "/sdhci@c8000600";
 		mmc1 = "/sdhci@c8000000";
 	};
@@ -26,19 +33,475 @@
 			status = "okay";
 			rgb {
 				status = "okay";
-				nvidia,panel = <&lcd_panel>;
+
+				nvidia,panel = <&panel>;
+
+				display-timings {
+					timing@0 {
+						/* PAZ00 has 1024x600 */
+						clock-frequency = <54030000>;
+						hactive = <1024>;
+						vactive = <600>;
+						hback-porch = <160>;
+						hfront-porch = <24>;
+						hsync-len = <136>;
+						vback-porch = <3>;
+						vfront-porch = <61>;
+						vsync-len = <6>;
+						hsync-active = <1>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap2", "gmb", "gmc", "gmd", "spia",
+					"spib", "spic", "spid", "spie";
+				nvidia,function = "gmi";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "pllc_out1";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gpu {
+				nvidia,pins = "gpu", "sdb", "sdd";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "twc";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spi4";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spif {
+				nvidia,pins = "spif", "uac";
+				nvidia,function = "rsvd4";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "spdif";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dap2", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme",
+					"gpu", "gpu7", "gpv", "i2cp", "pta",
+					"rm", "sdio1", "slxk", "spdo", "uac",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
+					"dtc", "dte", "slxa", "slxc", "slxd",
+					"spdi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib", "spid",
+					"spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"spic", "spig", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
+					"spie", "spih", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhs", "lsc0", "lspi",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_lcsn {
+				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
+					"lm0", "lm1", "lpp", "lpw0", "lpw1",
+					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "lvp1", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
 			};
 		};
 	};
 
+	i2s@70002800 {
+		status = "okay";
+	};
+
 	serial@70006000 {
-		clock-frequency = < 216000000 >;
+		status = "okay";
+	};
+
+	serial@70006200 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		alc5632: alc5632@1e {
+			compatible = "realtek,alc5632";
+			reg = <0x1e>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	nvec@7000c500 {
+		compatible = "nvidia,nvec";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		slave-addr = <138>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+		         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
 	};
 
 	usb@c5008000 {
 		status = "okay";
 	};
 
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
 	sdhci@c8000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
@@ -53,6 +516,19 @@
 		non-removable;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		backlight-boot-off;
+	};
+
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -60,38 +536,101 @@
 
 		clk32k_in: clock@0 {
 			compatible = "fixed-clock";
-			reg=<0>;
+			reg = <0>;
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 	};
 
-	pwm: pwm@7000a000 {
-		status = "okay";
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
 	};
 
-	lcd_panel: panel {
-		/* PAZ00 has 1024x600 */
-		clock = <54030000>;
-		xres = <1024>;
-		yres = <600>;
-		right-margin = <160>;
-		left-margin = <24>;
-		hsync-len = <136>;
-		upper-margin = <3>;
-		lower-margin = <61>;
-		vsync-len = <6>;
-		hsync-active-high;
-		nvidia,bits-per-pixel = <16>;
-		nvidia,pwm = <&pwm 0 0>;
-		nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(U, 4)
-							GPIO_ACTIVE_HIGH>;
-		nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(M, 6)
-							GPIO_ACTIVE_HIGH>;
-		nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
-							GPIO_ACTIVE_HIGH>;
-		nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(A, 4)
-							GPIO_ACTIVE_HIGH>;
-		nvidia,panel-timings = <400 4 203 17 15>;
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wifi {
+			label = "wifi-led";
+			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
+
+	panel: panel {
+		compatible = "samsung,ltn101nt05", "simple-panel";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		p5valw_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+5valw";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdd_pnl_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+3VS,vdd_pnl";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL",
+			"DMICDAT", "Digital Mic";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+		         <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+		         <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 };

arch/arm/dts/tegra20-u-boot.dtsi

@@ -0,0 +1,8 @@
+/ {
+	host1x@50000000 {
+		u-boot,dm-pre-reloc;
+		dc@54200000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};

arch/arm/dts/tegra20.dtsi

@@ -10,7 +10,6 @@
 	interrupt-parent = <&lic>;
 
 	host1x@50000000 {
-		u-boot,dm-pre-reloc;
 		compatible = "nvidia,tegra20-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -78,7 +77,6 @@
 		};
 
 		dc@54200000 {
-			u-boot,dm-pre-reloc;
 			compatible = "nvidia,tegra20-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/dts/tegra30-apalis.dts

@@ -44,10 +44,12 @@
 		hvdd-pex-supply = <&sys_3v3_reg>;
 
 		pci@1,0 {
+			/* TS_DIFF1/2/3/4 left disabled */
 			nvidia,num-lanes = <4>;
 		};
 
 		pci@2,0 {
+			/* PCIE1_RX/TX left disabled */
 			nvidia,num-lanes = <1>;
 		};
 

arch/arm/dts/uniphier-common32.dtsi

@@ -1,177 +0,0 @@
-/*
- * Device Tree Source commonly used by UniPhier ARM SoCs
- *
- * Copyright (C) 2015-2016 Socionext Inc.
- *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+	X11
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	clocks {
-		refclk: ref {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-		u-boot,dm-pre-reloc;
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			interrupts = <0 33 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			clocks = <&peri_clk 0>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			interrupts = <0 35 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			clocks = <&peri_clk 1>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			interrupts = <0 37 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			clocks = <&peri_clk 2>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			interrupts = <0 177 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			clocks = <&peri_clk 3>;
-		};
-
-		system_bus: system-bus@58c00000 {
-			compatible = "socionext,uniphier-system-bus";
-			status = "disabled";
-			reg = <0x58c00000 0x400>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_system_bus>;
-		};
-
-		smpctrl@59800000 {
-			compatible = "socionext,uniphier-smpctrl";
-			reg = <0x59801000 0x400>;
-		};
-
-		mioctrl@59810000 {
-			compatible = "socionext,uniphier-mioctrl",
-				     "simple-mfd", "syscon";
-			reg = <0x59810000 0x800>;
-			u-boot,dm-pre-reloc;
-
-			mio_clk: clock {
-				#clock-cells = <1>;
-			};
-
-			mio_rst: reset {
-				#reset-cells = <1>;
-			};
-		};
-
-		perictrl@59820000 {
-			compatible = "socionext,uniphier-perictrl",
-				     "simple-mfd", "syscon";
-			reg = <0x59820000 0x200>;
-
-			peri_clk: clock {
-				#clock-cells = <1>;
-			};
-
-			peri_rst: reset {
-				#reset-cells = <1>;
-			};
-		};
-
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
-
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
-
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-		};
-
-		soc-glue@5f800000 {
-			compatible = "socionext,uniphier-soc-glue",
-				     "simple-mfd", "syscon";
-			reg = <0x5f800000 0x2000>;
-			u-boot,dm-pre-reloc;
-
-			pinctrl: pinctrl {
-				/* specify compatible in each SoC DTSI */
-				u-boot,dm-pre-reloc;
-			};
-		};
-
-		sysctrl@61840000 {
-			compatible = "socionext,uniphier-sysctrl",
-				     "simple-mfd", "syscon";
-			reg = <0x61840000 0x4000>;
-
-			sys_clk: clock {
-				#clock-cells = <1>;
-			};
-
-			sys_rst: reset {
-				#reset-cells = <1>;
-			};
-		};
-
-		nand: nand@68000000 {
-			compatible = "denali,denali-nand-dt";
-			status = "disabled";
-			reg-names = "nand_data", "denali_reg";
-			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
-			interrupts = <0 65 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-		};
-	};
-};
-
-/include/ "uniphier-pinctrl.dtsi"

arch/arm/dts/uniphier-ld11.dtsi

@@ -7,7 +7,7 @@
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
-/memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
+/memreserve/ 0x80000000 0x00080000;
 
 / {
 	compatible = "socionext,uniphier-ld11";
@@ -34,31 +34,66 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x000>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x001>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
 		};
 	};
 
+	cluster0_opp: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@245000000 {
+			opp-hz = /bits/ 64 <245000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@490000000 {
+			opp-hz = /bits/ 64 <490000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@653334000 {
+			opp-hz = /bits/ 64 <653334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@980000000 {
+			opp-hz = /bits/ 64 <980000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 
 	timer {
@@ -129,7 +164,7 @@
 			interrupts = <0 41 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -142,7 +177,7 @@
 			interrupts = <0 42 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -152,7 +187,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -165,7 +200,7 @@
 			interrupts = <0 44 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -178,7 +213,7 @@
 			interrupts = <0 45 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -188,7 +223,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -207,8 +242,19 @@
 			reg = <0x59801000 0x400>;
 		};
 
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld11-sdctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x400>;
+
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld11-sd-reset";
+				#reset-cells = <1>;
+			};
+		};
+
 		perictrl@59820000 {
-			compatible = "socionext,uniphier-perictrl",
+			compatible = "socionext,uniphier-ld11-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
@@ -223,6 +269,19 @@
 			};
 		};
 
+		emmc: sdhc@5a000000 {
+			compatible = "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc_1v8>;
+			clocks = <&sys_clk 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			/* mmc-hs400-1_8v; support depends on board design */
+		};
+
 		usb0: usb@5a800100 {
 			compatible = "socionext,uniphier-ehci", "generic-ehci";
 			status = "disabled";
@@ -277,7 +336,7 @@
 		};
 
 		soc-glue@5f800000 {
-			compatible = "socionext,uniphier-soc-glue",
+			compatible = "socionext,uniphier-ld11-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 			u-boot,dm-pre-reloc;
@@ -305,7 +364,7 @@
 		sysctrl@61840000 {
 			compatible = "socionext,uniphier-ld11-sysctrl",
 				     "simple-mfd", "syscon";
-			reg = <0x61840000 0x4000>;
+			reg = <0x61840000 0x10000>;
 
 			sys_clk: clock {
 				compatible = "socionext,uniphier-ld11-clock";
@@ -317,6 +376,18 @@
 				#reset-cells = <1>;
 			};
 		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
+			nand-ecc-strength = <8>;
+		};
 	};
 };
 

arch/arm/dts/uniphier-ld20.dtsi

@@ -7,7 +7,7 @@
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
-/memreserve/ 0x80000000 0x00000008;	/* cpu-release-addr */
+/memreserve/ 0x80000000 0x00080000;
 
 / {
 	compatible = "socionext,uniphier-ld20";
@@ -43,47 +43,126 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0 0x000>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0 0x001>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
+			clocks = <&sys_clk 32>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster0_opp>;
 		};
 
 		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x100>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster1_opp>;
 		};
 
 		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0 0x101>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0 0x80000000>;
+			clocks = <&sys_clk 33>;
+			enable-method = "psci";
+			operating-points-v2 = <&cluster1_opp>;
 		};
 	};
 
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp@250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@666667000 {
+			opp-hz = /bits/ 64 <666667000>;
+			clock-latency-ns = <300>;
+		};
+		opp@733334000 {
+			opp-hz = /bits/ 64 <733334000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			clock-latency-ns = <300>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			clock-latency-ns = <300>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
 	clocks {
 		refclk: ref {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
-
-		i2c_clk: i2c_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
 	};
 
 	timer {
@@ -154,7 +233,7 @@
 			interrupts = <0 41 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 4>;
 			clock-frequency = <100000>;
 		};
 
@@ -167,7 +246,7 @@
 			interrupts = <0 42 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 5>;
 			clock-frequency = <100000>;
 		};
 
@@ -177,7 +256,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 6>;
 			clock-frequency = <400000>;
 		};
 
@@ -190,7 +269,7 @@
 			interrupts = <0 44 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 7>;
 			clock-frequency = <100000>;
 		};
 
@@ -203,7 +282,7 @@
 			interrupts = <0 45 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 8>;
 			clock-frequency = <100000>;
 		};
 
@@ -213,7 +292,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
+			clocks = <&peri_clk 9>;
 			clock-frequency = <400000>;
 		};
 
@@ -232,24 +311,24 @@
 			reg = <0x59801000 0x400>;
 		};
 
-		mioctrl@59810000 {
-			compatible = "socionext,uniphier-mioctrl",
+		sdctrl@59810000 {
+			compatible = "socionext,uniphier-ld20-sdctrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59810000 0x800>;
 
-			mio_clk: clock {
-				compatible = "socionext,uniphier-ld20-mio-clock";
+			sd_clk: clock {
+				compatible = "socionext,uniphier-ld20-sd-clock";
 				#clock-cells = <1>;
 			};
 
-			mio_rst: reset {
-				compatible = "socionext,uniphier-ld20-mio-reset";
+			sd_rst: reset {
+				compatible = "socionext,uniphier-ld20-sd-reset";
 				#reset-cells = <1>;
 			};
 		};
 
 		perictrl@59820000 {
-			compatible = "socionext,uniphier-perictrl",
+			compatible = "socionext,uniphier-ld20-perictrl",
 				     "simple-mfd", "syscon";
 			reg = <0x59820000 0x200>;
 
@@ -264,6 +343,19 @@
 			};
 		};
 
+		emmc: sdhc@5a000000 {
+			compatible = "cdns,sd4hc";
+			reg = <0x5a000000 0x400>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_emmc_1v8>;
+			clocks = <&sys_clk 4>;
+			bus-width = <8>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			/* mmc-hs400-1_8v; support depends on board design */
+		};
+
 		sd: sdhc@5a400000 {
 			compatible = "socionext,uniphier-sdhc";
 			status = "disabled";
@@ -271,14 +363,15 @@
 			interrupts = <0 76 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd>;
-			clocks = <&mio_clk 0>;
+			clocks = <&sd_clk 0>;
 			reset-names = "host";
-			resets = <&mio_rst 0>;
+			resets = <&sd_rst 0>;
 			bus-width = <4>;
+			cap-sd-highspeed;
 		};
 
 		soc-glue@5f800000 {
-			compatible = "socionext,uniphier-soc-glue",
+			compatible = "socionext,uniphier-ld20-soc-glue",
 				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 			u-boot,dm-pre-reloc;
@@ -304,9 +397,9 @@
 		};
 
 		sysctrl@61840000 {
-			compatible = "socionext,uniphier-sysctrl",
+			compatible = "socionext,uniphier-ld20-sysctrl",
 				     "simple-mfd", "syscon";
-			reg = <0x61840000 0x4000>;
+			reg = <0x61840000 0x10000>;
 
 			sys_clk: clock {
 				compatible = "socionext,uniphier-ld20-clock";
@@ -318,6 +411,35 @@
 				#reset-cells = <1>;
 			};
 		};
+
+		usb: usb@65b00000 {
+			compatible = "socionext,uniphier-ld20-dwc3";
+			reg = <0x65b00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+				    <&pinctrl_usb2>, <&pinctrl_usb3>;
+			dwc3@65a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x65a00000 0x10000>;
+				interrupts = <0 134 4>;
+				tx-fifo-resize;
+			};
+		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,denali-nand-v5b";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
+			nand-ecc-strength = <8>;
+		};
 	};
 };
 

arch/arm/dts/uniphier-ld4.dtsi

@@ -7,7 +7,7 @@
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-ld4";
@@ -25,313 +25,438 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+	};
 
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+		u-boot,dm-pre-reloc;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			clock-frequency = <36864000>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			clock-frequency = <36864000>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			clock-frequency = <36864000>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			clock-frequency = <36864000>;
+		};
+
+		port0x: gpio@55000008 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000008 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port1x: gpio@55000010 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000010 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port2x: gpio@55000018 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000018 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port3x: gpio@55000020 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000020 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port4: gpio@55000028 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000028 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port5x: gpio@55000030 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000030 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port6x: gpio@55000038 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000038 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port7x: gpio@55000040 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000040 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port8x: gpio@55000048 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000048 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port9x: gpio@55000050 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000050 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port10x: gpio@55000058 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000058 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port11x: gpio@55000060 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000060 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port12x: gpio@55000068 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000068 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port13x: gpio@55000070 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000070 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port14x: gpio@55000078 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000078 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port16x: gpio@55000088 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000088 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-ld4-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-ld4-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-ld4-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-ld4-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-ld4-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-ld4-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sdhc";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "1.8v";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_1v8>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: sdhc@5a500000 {
+			compatible = "socionext,uniphier-sdhc";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default", "1.8v";
+			pinctrl-0 = <&pinctrl_emmc>;
+			pinctrl-1 = <&pinctrl_emmc_1v8>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 1>, <&mio_rst 4>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-ld4-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+			u-boot,dm-pre-reloc;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-ld4-pinctrl";
+				u-boot,dm-pre-reloc;
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		aidet@61830000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x61830000 0x200>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-ld4-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-ld4-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-ld4-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
+			nand-ecc-strength = <8>;
 		};
 	};
 };
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>;
-		cache-unified;
-		cache-size = <(512 * 1024)>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-	port0x: gpio@55000008 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000008 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port1x: gpio@55000010 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000010 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port2x: gpio@55000018 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000018 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port3x: gpio@55000020 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000020 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port4: gpio@55000028 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000028 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port5x: gpio@55000030 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000030 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port6x: gpio@55000038 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000038 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port7x: gpio@55000040 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000040 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port8x: gpio@55000048 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000048 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port9x: gpio@55000050 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000050 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port10x: gpio@55000058 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000058 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port11x: gpio@55000060 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000060 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port12x: gpio@55000068 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000068 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port13x: gpio@55000070 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000070 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port14x: gpio@55000078 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000078 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port16x: gpio@55000088 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000088 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58400000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <100000>;
-	};
-
-	i2c1: i2c@58480000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58480000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <100000>;
-	};
-
-	/* chip-internal connection for DMD */
-	i2c2: i2c@58500000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58500000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 43 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <400000>;
-	};
-
-	i2c3: i2c@58580000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58580000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <100000>;
-	};
-
-	sd: sdhc@5a400000 {
-		compatible = "socionext,uniphier-sdhc";
-		status = "disabled";
-		reg = <0x5a400000 0x200>;
-		interrupts = <0 76 4>;
-		pinctrl-names = "default", "1.8v";
-		pinctrl-0 = <&pinctrl_sd>;
-		pinctrl-1 = <&pinctrl_sd_1v8>;
-		clocks = <&mio_clk 0>;
-		reset-names = "host", "bridge";
-		resets = <&mio_rst 0>, <&mio_rst 3>;
-		bus-width = <4>;
-	};
-
-	emmc: sdhc@5a500000 {
-		compatible = "socionext,uniphier-sdhc";
-		status = "disabled";
-		reg = <0x5a500000 0x200>;
-		interrupts = <0 78 4>;
-		pinctrl-names = "default", "1.8v";
-		pinctrl-0 = <&pinctrl_emmc>;
-		pinctrl-1 = <&pinctrl_emmc_1v8>;
-		clocks = <&mio_clk 1>;
-		reset-names = "host", "bridge", "hw-reset";
-		resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
-		bus-width = <8>;
-		non-removable;
-	};
-
-	usb0: usb@5a800100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a800100 0x100>;
-		interrupts = <0 80 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb0>;
-		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
-		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
-			 <&mio_rst 12>;
-	};
-
-	usb1: usb@5a810100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a810100 0x100>;
-		interrupts = <0 81 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1>;
-		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
-		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
-			 <&mio_rst 13>;
-	};
-
-	usb2: usb@5a820100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a820100 0x100>;
-		interrupts = <0 82 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
-		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
-			 <&mio_rst 14>;
-	};
-
-	aidet@61830000 {
-		compatible = "simple-mfd", "syscon";
-		reg = <0x61830000 0x200>;
-	};
-};
-
-&refclk {
-	clock-frequency = <24576000>;
-};
-
-&serial0 {
-	clock-frequency = <36864000>;
-};
-
-&serial1 {
-	clock-frequency = <36864000>;
-};
-
-&serial2 {
-	clock-frequency = <36864000>;
-};
-
-&serial3 {
-	interrupts = <0 29 4>;
-	clock-frequency = <36864000>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-ld4-mio-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-ld4-mio-reset";
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-ld4-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-ld4-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-ld4-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-ld4-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-ld4-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"

arch/arm/dts/uniphier-pro4-ref.dts

@@ -68,10 +68,6 @@
 	status = "okay";
 };
 
-&usb0 {
-	status = "okay";
-};
-
 &usb2 {
 	status = "okay";
 };
@@ -80,6 +76,14 @@
 	status = "okay";
 };
 
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
 /* for U-Boot only */
 &serial0 {
 	u-boot,dm-pre-reloc;

arch/arm/dts/uniphier-pxs2-gentil.dts

@@ -71,7 +71,7 @@
 	u-boot,dm-pre-reloc;
 };
 
-&mio_clk {
+&sd_clk {
 	u-boot,dm-pre-reloc;
 };
 

arch/arm/dts/uniphier-pxs2-vodka.dts

@@ -55,7 +55,7 @@
 	u-boot,dm-pre-reloc;
 };
 
-&mio_clk {
+&sd_clk {
 	u-boot,dm-pre-reloc;
 };
 

arch/arm/dts/uniphier-sld3.dtsi

@@ -50,12 +50,6 @@
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
-
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
-		};
 	};
 
 	soc {
@@ -251,7 +245,7 @@
 			interrupts = <0 41 1>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -262,7 +256,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 42 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -273,7 +267,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -284,7 +278,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 44 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <100000>;
 		};
 
@@ -295,7 +289,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 45 1>;
-			clocks = <&iobus_clk>;
+			clocks = <&sys_clk 1>;
 			clock-frequency = <400000>;
 		};
 
@@ -339,9 +333,12 @@
 			pinctrl-0 = <&pinctrl_emmc>;
 			pinctrl-1 = <&pinctrl_emmc_1v8>;
 			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge";
 			resets = <&mio_rst 1>, <&mio_rst 4>;
 			bus-width = <8>;
 			non-removable;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
 		};
 
 		sd: sdhc@5a500000 {
@@ -353,8 +350,13 @@
 			pinctrl-0 = <&pinctrl_sd>;
 			pinctrl-1 = <&pinctrl_sd_1v8>;
 			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
 			resets = <&mio_rst 0>, <&mio_rst 3>;
 			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
 		};
 
 		usb0: usb@5a800100 {
@@ -406,7 +408,8 @@
 		};
 
 		soc-glue@5f800000 {
-			compatible = "simple-mfd", "syscon";
+			compatible = "socionext,uniphier-sld3-soc-glue",
+				     "simple-mfd", "syscon";
 			reg = <0x5f800000 0x2000>;
 			u-boot,dm-pre-reloc;
 
@@ -422,7 +425,7 @@
 		};
 
 		sysctrl@f1840000 {
-			compatible = "socionext,uniphier-sysctrl",
+			compatible = "socionext,uniphier-sld3-sysctrl",
 				     "simple-mfd", "syscon";
 			reg = <0xf1840000 0x4000>;
 
@@ -438,9 +441,13 @@
 		};
 
 		nand: nand@f8000000 {
-			compatible = "denali,denali-nand-dt";
-			reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
+			compatible = "socionext,denali-nand-v5a";
+			status = "disabled";
 			reg-names = "nand_data", "denali_reg";
+			reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
+			interrupts = <0 65 4>;
+			clocks = <&sys_clk 2>;
+			nand-ecc-strength = <8>;
 		};
 	};
 };

arch/arm/dts/uniphier-sld8.dtsi

@@ -7,7 +7,7 @@
  * SPDX-License-Identifier:	GPL-2.0+	X11
  */
 
-/include/ "uniphier-common32.dtsi"
+/include/ "skeleton.dtsi"
 
 / {
 	compatible = "socionext,uniphier-sld8";
@@ -25,313 +25,438 @@
 		};
 	};
 
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
 	clocks {
+		refclk: ref {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 		};
+	};
 
-		iobus_clk: iobus_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <100000000>;
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+		u-boot,dm-pre-reloc;
+
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(256 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&peri_clk 0>;
+			clock-frequency = <80000000>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&peri_clk 1>;
+			clock-frequency = <80000000>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&peri_clk 2>;
+			clock-frequency = <80000000>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 29 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&peri_clk 3>;
+			clock-frequency = <80000000>;
+		};
+
+		port0x: gpio@55000008 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000008 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port1x: gpio@55000010 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000010 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port2x: gpio@55000018 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000018 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port3x: gpio@55000020 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000020 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port4: gpio@55000028 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000028 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port5x: gpio@55000030 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000030 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port6x: gpio@55000038 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000038 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port7x: gpio@55000040 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000040 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port8x: gpio@55000048 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000048 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port9x: gpio@55000050 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000050 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port10x: gpio@55000058 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000058 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port11x: gpio@55000060 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000060 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port12x: gpio@55000068 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000068 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port13x: gpio@55000070 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000070 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port14x: gpio@55000078 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000078 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		port16x: gpio@55000088 {
+			compatible = "socionext,uniphier-gpio";
+			reg = <0x55000088 0x8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		i2c0: i2c@58400000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58400000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&peri_clk 4>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58480000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58480000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&peri_clk 5>;
+			clock-frequency = <100000>;
+		};
+
+		/* chip-internal connection for DMD */
+		i2c2: i2c@58500000 {
+			compatible = "socionext,uniphier-i2c";
+			reg = <0x58500000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&peri_clk 6>;
+			clock-frequency = <400000>;
+		};
+
+		i2c3: i2c@58580000 {
+			compatible = "socionext,uniphier-i2c";
+			status = "disabled";
+			reg = <0x58580000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&peri_clk 7>;
+			clock-frequency = <100000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_system_bus>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		mioctrl@59810000 {
+			compatible = "socionext,uniphier-sld8-mioctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59810000 0x800>;
+
+			mio_clk: clock {
+				compatible = "socionext,uniphier-sld8-mio-clock";
+				#clock-cells = <1>;
+			};
+
+			mio_rst: reset {
+				compatible = "socionext,uniphier-sld8-mio-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		perictrl@59820000 {
+			compatible = "socionext,uniphier-sld8-perictrl",
+				     "simple-mfd", "syscon";
+			reg = <0x59820000 0x200>;
+
+			peri_clk: clock {
+				compatible = "socionext,uniphier-sld8-peri-clock";
+				#clock-cells = <1>;
+			};
+
+			peri_rst: reset {
+				compatible = "socionext,uniphier-sld8-peri-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		sd: sdhc@5a400000 {
+			compatible = "socionext,uniphier-sdhc";
+			status = "disabled";
+			reg = <0x5a400000 0x200>;
+			interrupts = <0 76 4>;
+			pinctrl-names = "default", "1.8v";
+			pinctrl-0 = <&pinctrl_sd>;
+			pinctrl-1 = <&pinctrl_sd_1v8>;
+			clocks = <&mio_clk 0>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 0>, <&mio_rst 3>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+		};
+
+		emmc: sdhc@5a500000 {
+			compatible = "socionext,uniphier-sdhc";
+			status = "disabled";
+			reg = <0x5a500000 0x200>;
+			interrupts = <0 78 4>;
+			pinctrl-names = "default", "1.8v";
+			pinctrl-0 = <&pinctrl_emmc>;
+			pinctrl-1 = <&pinctrl_emmc_1v8>;
+			clocks = <&mio_clk 1>;
+			reset-names = "host", "bridge";
+			resets = <&mio_rst 1>, <&mio_rst 4>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			cap-mmc-hw-reset;
+		};
+
+		usb0: usb@5a800100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a800100 0x100>;
+			interrupts = <0 80 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
+				 <&mio_rst 12>;
+		};
+
+		usb1: usb@5a810100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a810100 0x100>;
+			interrupts = <0 81 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
+				 <&mio_rst 13>;
+		};
+
+		usb2: usb@5a820100 {
+			compatible = "socionext,uniphier-ehci", "generic-ehci";
+			status = "disabled";
+			reg = <0x5a820100 0x100>;
+			interrupts = <0 82 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
+				 <&mio_rst 14>;
+		};
+
+		soc-glue@5f800000 {
+			compatible = "socionext,uniphier-sld8-soc-glue",
+				     "simple-mfd", "syscon";
+			reg = <0x5f800000 0x2000>;
+			u-boot,dm-pre-reloc;
+
+			pinctrl: pinctrl {
+				compatible = "socionext,uniphier-sld8-pinctrl";
+				u-boot,dm-pre-reloc;
+			};
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		aidet@61830000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x61830000 0x200>;
+		};
+
+		sysctrl@61840000 {
+			compatible = "socionext,uniphier-sld8-sysctrl",
+				     "simple-mfd", "syscon";
+			reg = <0x61840000 0x10000>;
+
+			sys_clk: clock {
+				compatible = "socionext,uniphier-sld8-clock";
+				#clock-cells = <1>;
+			};
+
+			sys_rst: reset {
+				compatible = "socionext,uniphier-sld8-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		nand: nand@68000000 {
+			compatible = "socionext,denali-nand-v5a";
+			status = "disabled";
+			reg-names = "nand_data", "denali_reg";
+			reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+			interrupts = <0 65 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			clocks = <&sys_clk 2>;
+			nand-ecc-strength = <8>;
 		};
 	};
 };
 
-&soc {
-	l2: l2-cache@500c0000 {
-		compatible = "socionext,uniphier-system-cache";
-		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
-		interrupts = <0 174 4>, <0 175 4>;
-		cache-unified;
-		cache-size = <(256 * 1024)>;
-		cache-sets = <256>;
-		cache-line-size = <128>;
-		cache-level = <2>;
-	};
-
-	port0x: gpio@55000008 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000008 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port1x: gpio@55000010 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000010 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port2x: gpio@55000018 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000018 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port3x: gpio@55000020 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000020 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port4: gpio@55000028 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000028 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port5x: gpio@55000030 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000030 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port6x: gpio@55000038 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000038 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port7x: gpio@55000040 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000040 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port8x: gpio@55000048 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000048 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port9x: gpio@55000050 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000050 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port10x: gpio@55000058 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000058 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port11x: gpio@55000060 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000060 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port12x: gpio@55000068 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000068 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port13x: gpio@55000070 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000070 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port14x: gpio@55000078 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000078 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	port16x: gpio@55000088 {
-		compatible = "socionext,uniphier-gpio";
-		reg = <0x55000088 0x8>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	i2c0: i2c@58400000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58400000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 41 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c0>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <100000>;
-	};
-
-	i2c1: i2c@58480000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58480000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 42 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c1>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <100000>;
-	};
-
-	/* chip-internal connection for DMD */
-	i2c2: i2c@58500000 {
-		compatible = "socionext,uniphier-i2c";
-		reg = <0x58500000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 43 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c2>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <400000>;
-	};
-
-	i2c3: i2c@58580000 {
-		compatible = "socionext,uniphier-i2c";
-		status = "disabled";
-		reg = <0x58580000 0x40>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <0 44 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c3>;
-		clocks = <&iobus_clk>;
-		clock-frequency = <100000>;
-	};
-
-	sd: sdhc@5a400000 {
-		compatible = "socionext,uniphier-sdhc";
-		status = "disabled";
-		reg = <0x5a400000 0x200>;
-		interrupts = <0 76 4>;
-		pinctrl-names = "default", "1.8v";
-		pinctrl-0 = <&pinctrl_sd>;
-		pinctrl-1 = <&pinctrl_sd_1v8>;
-		clocks = <&mio_clk 0>;
-		reset-names = "host", "bridge";
-		resets = <&mio_rst 0>, <&mio_rst 3>;
-		bus-width = <4>;
-	};
-
-	emmc: sdhc@5a500000 {
-		compatible = "socionext,uniphier-sdhc";
-		status = "disabled";
-		interrupts = <0 78 4>;
-		reg = <0x5a500000 0x200>;
-		pinctrl-names = "default", "1.8v";
-		pinctrl-0 = <&pinctrl_emmc>;
-		pinctrl-1 = <&pinctrl_emmc_1v8>;
-		clocks = <&mio_clk 1>;
-		reset-names = "host", "bridge", "hw-reset";
-		resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
-		bus-width = <8>;
-		non-removable;
-	};
-
-	usb0: usb@5a800100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a800100 0x100>;
-		interrupts = <0 80 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb0>;
-		clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
-		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
-			 <&mio_rst 12>;
-	};
-
-	usb1: usb@5a810100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a810100 0x100>;
-		interrupts = <0 81 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1>;
-		clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
-		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
-			 <&mio_rst 13>;
-	};
-
-	usb2: usb@5a820100 {
-		compatible = "socionext,uniphier-ehci", "generic-ehci";
-		status = "disabled";
-		reg = <0x5a820100 0x100>;
-		interrupts = <0 82 4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb2>;
-		clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
-		resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
-			 <&mio_rst 14>;
-	};
-
-	aidet@61830000 {
-		compatible = "simple-mfd", "syscon";
-		reg = <0x61830000 0x200>;
-	};
-};
-
-&refclk {
-	clock-frequency = <25000000>;
-};
-
-&serial0 {
-	clock-frequency = <80000000>;
-};
-
-&serial1 {
-	clock-frequency = <80000000>;
-};
-
-&serial2 {
-	clock-frequency = <80000000>;
-};
-
-&serial3 {
-	interrupts = <0 29 4>;
-	clock-frequency = <80000000>;
-};
-
-&mio_clk {
-	compatible = "socionext,uniphier-sld8-mio-clock";
-};
-
-&mio_rst {
-	compatible = "socionext,uniphier-sld8-mio-reset";
-};
-
-&peri_clk {
-	compatible = "socionext,uniphier-sld8-peri-clock";
-};
-
-&peri_rst {
-	compatible = "socionext,uniphier-sld8-peri-reset";
-};
-
-&pinctrl {
-	compatible = "socionext,uniphier-sld8-pinctrl";
-};
-
-&sys_clk {
-	compatible = "socionext,uniphier-sld8-clock";
-};
-
-&sys_rst {
-	compatible = "socionext,uniphier-sld8-reset";
-};
+/include/ "uniphier-pinctrl.dtsi"

arch/arm/dts/vf.dtsi

@@ -35,6 +35,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x40000000 0x00070000>;
 			ranges;
 
 			uart0: serial@40027000 {
@@ -130,6 +131,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x40080000 0x0007f000>;
 			ranges;
 
 			uart4: serial@400a9000 {

arch/arm/dts/zynq-7000.dtsi

@@ -16,7 +16,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -30,7 +30,7 @@
 			>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;

arch/arm/dts/zynqmp.dtsi

@@ -7,6 +7,7 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
+
 / {
 	compatible = "xlnx,zynqmp";
 	#address-cells = <2>;

arch/arm/imx-common/Makefile

@@ -34,9 +34,11 @@ endif
 ifeq ($(SOC),$(filter $(SOC),vf610))
 obj-y += ddrmc-vf610.o
 endif
+ifneq ($(CONFIG_SPL_BUILD),y)
 obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
 obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
+endif
 
 PLUGIN = board/$(BOARDDIR)/plugin
 
@@ -66,6 +68,7 @@ $(IMX_CONFIG): %.cfgtmp: % FORCE
 
 MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
 	-e $(CONFIG_SYS_TEXT_BASE)
+u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
 
 u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
@@ -73,6 +76,7 @@ u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
 ifeq ($(CONFIG_OF_SEPARATE),y)
 MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
 	-e $(CONFIG_SYS_TEXT_BASE)
+u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
 
 u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
@@ -81,6 +85,8 @@ endif
 MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
 	-e $(CONFIG_SPL_TEXT_BASE)
 
+SPL: MKIMAGEOUTPUT = SPL.log
+
 SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
 	$(call if_changed,mkimage)
 

arch/arm/imx-common/cache.c

@@ -8,6 +8,7 @@
 #include <asm/armv7.h>
 #include <asm/pl310.h>
 #include <asm/io.h>
+#include <asm/imx-common/sys_proto.h>
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 void enable_caches(void)
@@ -39,6 +40,7 @@ void enable_caches(void)
 void v7_outer_cache_enable(void)
 {
 	struct pl310_regs *const pl310 = (struct pl310_regs *)L2_PL310_BASE;
+	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 	unsigned int val;
 
 
@@ -55,15 +57,14 @@ void v7_outer_cache_enable(void)
 	 */
 	setbits_le32(&pl310->pl310_aux_ctrl, L310_SHARED_ATT_OVERRIDE_ENABLE);
 
-#if defined CONFIG_MX6SL
-	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-	val = readl(&iomux->gpr[11]);
-	if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
-		/* L2 cache configured as OCRAM, reset it */
-		val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
-		writel(val, &iomux->gpr[11]);
+	if (is_mx6sl() || is_mx6sll()) {
+		val = readl(&iomux->gpr[11]);
+		if (val & IOMUXC_GPR11_L2CACHE_AS_OCRAM) {
+			/* L2 cache configured as OCRAM, reset it */
+			val &= ~IOMUXC_GPR11_L2CACHE_AS_OCRAM;
+			writel(val, &iomux->gpr[11]);
+		}
 	}
-#endif
 
 	writel(0x132, &pl310->pl310_tag_latency_ctrl);
 	writel(0x132, &pl310->pl310_data_latency_ctrl);

arch/arm/imx-common/cpu.c

@@ -155,6 +155,8 @@ const char *get_imx_type(u32 imxtype)
 		return "6SOLO";	/* Solo version of the mx6 */
 	case MXC_CPU_MX6SL:
 		return "6SL";	/* Solo-Lite version of the mx6 */
+	case MXC_CPU_MX6SLL:
+		return "6SLL";	/* SLL version of the mx6 */
 	case MXC_CPU_MX6SX:
 		return "6SX";   /* SoloX version of the mx6 */
 	case MXC_CPU_MX6UL:

arch/arm/imx-common/hab.c

@@ -110,6 +110,10 @@
  * +------------+ + CSF_PAD_SIZE
  */
 
+static bool is_hab_enabled(void);
+
+#if !defined(CONFIG_SPL_BUILD)
+
 #define MAX_RECORD_BYTES     (8*1024) /* 4 kbytes */
 
 struct record {
@@ -257,22 +261,6 @@ uint8_t hab_engines[16] = {
 	-1
 };
 
-bool is_hab_enabled(void)
-{
-	struct imx_sec_config_fuse_t *fuse =
-		(struct imx_sec_config_fuse_t *)&imx_sec_config_fuse;
-	uint32_t reg;
-	int ret;
-
-	ret = fuse_read(fuse->bank, fuse->word, &reg);
-	if (ret) {
-		puts("\nSecure boot fuse read error\n");
-		return ret;
-	}
-
-	return (reg & IS_HAB_ENABLED_BIT) == IS_HAB_ENABLED_BIT;
-}
-
 static inline uint8_t get_idx(uint8_t *list, uint8_t tgt)
 {
 	uint8_t idx = 0;
@@ -359,6 +347,68 @@ int get_hab_status(void)
 	return 0;
 }
 
+int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	if ((argc != 1)) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	get_hab_status();
+
+	return 0;
+}
+
+static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc,
+				char * const argv[])
+{
+	ulong	addr, ivt_offset;
+	int	rcode = 0;
+
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	addr = simple_strtoul(argv[1], NULL, 16);
+	ivt_offset = simple_strtoul(argv[2], NULL, 16);
+
+	rcode = authenticate_image(addr, ivt_offset);
+
+	return rcode;
+}
+
+U_BOOT_CMD(
+		hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
+		"display HAB status",
+		""
+	  );
+
+U_BOOT_CMD(
+		hab_auth_img, 3, 0, do_authenticate_image,
+		"authenticate image via HAB",
+		"addr ivt_offset\n"
+		"addr - image hex address\n"
+		"ivt_offset - hex offset of IVT in the image"
+	  );
+
+
+#endif /* !defined(CONFIG_SPL_BUILD) */
+
+static bool is_hab_enabled(void)
+{
+	struct imx_sec_config_fuse_t *fuse =
+		(struct imx_sec_config_fuse_t *)&imx_sec_config_fuse;
+	uint32_t reg;
+	int ret;
+
+	ret = fuse_read(fuse->bank, fuse->word, &reg);
+	if (ret) {
+		puts("\nSecure boot fuse read error\n");
+		return ret;
+	}
+
+	return (reg & IS_HAB_ENABLED_BIT) == IS_HAB_ENABLED_BIT;
+}
+
 uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
 {
 	uint32_t load_addr = 0;
@@ -400,7 +450,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
 				     (void *)(ddr_start + ivt_offset+IVT_SIZE),
 				     4, 0x10, 0);
 
+#if  !defined(CONFIG_SPL_BUILD)
 			get_hab_status();
+#endif
 
 			puts("\nCalling authenticate_image in ROM\n");
 			printf("\tivt_offset = 0x%x\n", ivt_offset);
@@ -449,7 +501,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
 
 		hab_caam_clock_enable(0);
 
+#if !defined(CONFIG_SPL_BUILD)
 		get_hab_status();
+#endif
 	} else {
 		puts("hab fuse not enabled\n");
 	}
@@ -459,46 +513,3 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
 
 	return result;
 }
-
-int do_hab_status(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if ((argc != 1)) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
-
-	get_hab_status();
-
-	return 0;
-}
-
-static int do_authenticate_image(cmd_tbl_t *cmdtp, int flag, int argc,
-				char * const argv[])
-{
-	ulong	addr, ivt_offset;
-	int	rcode = 0;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	addr = simple_strtoul(argv[1], NULL, 16);
-	ivt_offset = simple_strtoul(argv[2], NULL, 16);
-
-	rcode = authenticate_image(addr, ivt_offset);
-
-	return rcode;
-}
-
-U_BOOT_CMD(
-		hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
-		"display HAB status",
-		""
-	  );
-
-U_BOOT_CMD(
-		hab_auth_img, 3, 0, do_authenticate_image,
-		"authenticate image via HAB",
-		"addr ivt_offset\n"
-		"addr - image hex address\n"
-		"ivt_offset - hex offset of IVT in the image"
-	  );

arch/arm/imx-common/iomux-v3.c

@@ -31,7 +31,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 		(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
 	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
 
-#if defined CONFIG_MX6SL
+#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL)
 	/* Check whether LVE bit needs to be set */
 	if (pad_ctrl & PAD_CTL_LVE) {
 		pad_ctrl &= ~PAD_CTL_LVE;
@@ -51,7 +51,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 			sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS;
 	}
 #else
-	if (is_mx6ull()) {
+	if (is_mx6ull() || is_mx6sll()) {
 		if (lpsr == IOMUX_CONFIG_LPSR) {
 			base = (void *)IOMUXC_SNVS_BASE_ADDR;
 			mux_mode &= ~IOMUX_CONFIG_LPSR;
@@ -60,7 +60,7 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 #endif
 #endif
 
-	if (is_soc_type(MXC_SOC_MX7) || is_cpu_type(MXC_CPU_MX6ULL) || mux_ctrl_ofs)
+	if (is_mx7() || is_mx6ull() || is_mx6sll() || mux_ctrl_ofs)
 		__raw_writel(mux_mode, base + mux_ctrl_ofs);
 
 	if (sel_input_ofs)
@@ -73,6 +73,10 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 #else
 	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
 		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+#if defined(CONFIG_MX6SLL)
+	else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+		clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT);
+#endif
 #endif
 
 #ifdef CONFIG_IOMUX_LPSR

arch/arm/imx-common/spl.c

@@ -12,11 +12,9 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/spl.h>
 #include <spl.h>
+#include <asm/imx-common/hab.h>
 
 #if defined(CONFIG_MX6)
-#define MX6_MMC_PORT_MASK	GENMASK(12, 11)
-#define MX6_MMC_PORT_2		BIT(11)
-
 /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
 u32 spl_boot_device(void)
 {
@@ -58,11 +56,10 @@ u32 spl_boot_device(void)
 	/* SD/eSD: 8.5.3, Table 8-15  */
 	case 0x4:
 	case 0x5:
+		return BOOT_DEVICE_MMC1;
 	/* MMC/eMMC: 8.5.3 */
 	case 0x6:
 	case 0x7:
-		if ((reg & MX6_MMC_PORT_MASK) == MX6_MMC_PORT_2)
-			return BOOT_DEVICE_MMC2;
 		return BOOT_DEVICE_MMC1;
 	/* NAND Flash: 8.5.2 */
 	case 0x8 ... 0xf:
@@ -94,3 +91,27 @@ u32 spl_boot_mode(const u32 boot_device)
 	}
 }
 #endif
+
+#if defined(CONFIG_SECURE_BOOT)
+
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	typedef void __noreturn (*image_entry_noargs_t)(void);
+
+	image_entry_noargs_t image_entry =
+		(image_entry_noargs_t)(unsigned long)spl_image->entry_point;
+
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
+
+	/* HAB looks for the CSF at the end of the authenticated data therefore,
+	 * we need to subtract the size of the CSF from the actual filesize */
+	if (authenticate_image(spl_image->load_addr,
+			       spl_image->size - CONFIG_CSF_SIZE)) {
+		image_entry();
+	} else {
+		puts("spl: ERROR:  image authentication unsuccessful\n");
+		hang();
+	}
+}
+
+#endif

arch/arm/imx-common/spl_sd.cfg

@@ -4,5 +4,15 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#define __ASSEMBLY__
+#include <config.h>
+
 IMAGE_VERSION	2
 BOOT_FROM	sd
+
+/*
+ * Secure boot support
+ */
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif

arch/arm/imx-common/timer.c

@@ -45,7 +45,7 @@ static inline int gpt_has_clk_source_osc(void)
 #if defined(CONFIG_MX6)
 	if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
 	    is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
-	    is_mx6ull())
+	    is_mx6ull() || is_mx6sll())
 		return 1;
 
 	return 0;
@@ -84,8 +84,12 @@ int timer_init(void)
 	if (gpt_has_clk_source_osc()) {
 		i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
 
-		/* For DL/S, SX, UL, ULL set 24Mhz OSC Enable bit and prescaler */
-		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull()) {
+		/*
+		 * For DL/S, SX, UL, ULL, SLL set 24Mhz OSC
+		 * Enable bit and prescaler
+		 */
+		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull() ||
+		    is_mx6sll()) {
 			i |= GPTCR_24MEN;
 
 			/* Produce 3Mhz clock */

arch/arm/include/asm/arch-armada100/gpio.h

@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2011
  * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
  *
  * (C) Copyright 2010
  * Marvell Semiconductor <www.marvell.com>

arch/arm/include/asm/arch-armada100/spi.h

@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2011
  * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
  *
  * (C) Copyright 2010
  * Marvell Semiconductor <www.marvell.com>

arch/arm/include/asm/arch-armada100/utmi-armada100.h

@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2012
  * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
  *
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>

arch/arm/include/asm/arch-armada8k/cache_llc.h

@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ * https://spdx.org/licenses
+ */
+
+#ifndef _CACHE_LLC_H_
+#define _CACHE_LLC_H_
+
+/* Armada-7K/8K last level cache */
+
+#define MVEBU_A8K_REGS_BASE_MSB		0xf000
+#define LLC_BASE_ADDR			0x8000
+#define LLC_CACHE_SYNC			0x700
+#define LLC_CACHE_SYNC_COMPLETE		0x730
+#define LLC_FLUSH_BY_WAY		0x7fc
+#define LLC_WAY_MASK			0xffffffff
+#define LLC_CACHE_SYNC_MASK		0x1
+
+#endif	/* _CACHE_LLC_H_ */

arch/arm/include/asm/arch-armada8k/soc-info.h

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0
+ * https://spdx.org/licenses
+ */
+
+#ifndef _SOC_INFO_H_
+#define _SOC_INFO_H_
+
+/* Pin Ctrl driver definitions */
+#define BITS_PER_PIN		4
+#define PIN_FUNC_MASK		((1 << BITS_PER_PIN) - 1)
+#define PIN_REG_SHIFT		3
+#define PIN_FIELD_MASK		((1 << PIN_REG_SHIFT) - 1)
+
+#endif	/* _SOC_INFO_H_ */

arch/arm/include/asm/arch-fsl-layerscape/config.h

@@ -55,10 +55,6 @@
 #define CONFIG_SYS_FSL_SFP_LE
 #define CONFIG_SYS_FSL_SRK_LE
 
-/* SEC */
-#define CONFIG_SYS_FSL_SEC_LE
-#define CONFIG_SYS_FSL_SEC_COMPAT	5
-
 /* Security Monitor */
 #define CONFIG_SYS_FSL_SEC_MON_LE
 
@@ -115,17 +111,7 @@
 #define EPU_EPCTR5		0x700060a14ULL
 #define EPU_EPGCR		0x700060000ULL
 
-#define CONFIG_SYS_FSL_ERRATUM_A008336
-#define CONFIG_SYS_FSL_ERRATUM_A008511
-#define CONFIG_SYS_FSL_ERRATUM_A008514
-#define CONFIG_SYS_FSL_ERRATUM_A008585
 #define CONFIG_SYS_FSL_ERRATUM_A008751
-#define CONFIG_SYS_FSL_ERRATUM_A009635
-#define CONFIG_SYS_FSL_ERRATUM_A009663
-#define CONFIG_SYS_FSL_ERRATUM_A009801
-#define CONFIG_SYS_FSL_ERRATUM_A009803
-#define CONFIG_SYS_FSL_ERRATUM_A009942
-#define CONFIG_SYS_FSL_ERRATUM_A010165
 
 /* ARM A57 CORE ERRATA */
 #define CONFIG_ARM_ERRATA_826974
@@ -135,7 +121,6 @@
 
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #elif defined(CONFIG_FSL_LSCH2)
-#define CONFIG_SYS_FSL_SEC_COMPAT		5
 #define CONFIG_SYS_FSL_OCRAM_BASE		0x10000000 /* initial RAM */
 #define CONFIG_SYS_FSL_OCRAM_SIZE		0x00200000 /* 2M */
 
@@ -146,7 +131,6 @@
 #define CONFIG_SYS_FSL_QSPI_BE
 #define CONFIG_SYS_FSL_CCSR_GUR_BE
 #define CONFIG_SYS_FSL_PEX_LUT_BE
-#define CONFIG_SYS_FSL_SEC_BE
 
 /* SoC related */
 #ifdef CONFIG_LS1043A
@@ -175,17 +159,12 @@
 #define GICD_BASE		0x01401000
 #define GICC_BASE		0x01402000
 
-#define CONFIG_SYS_FSL_ERRATUM_A008850
-#define CONFIG_SYS_FSL_ERRATUM_A009663
-#define CONFIG_SYS_FSL_ERRATUM_A009929
-#define CONFIG_SYS_FSL_ERRATUM_A009942
-#define CONFIG_SYS_FSL_ERRATUM_A009660
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
-#elif defined(CONFIG_ARCH_LS1012A)
-#undef	CONFIG_SYS_FSL_DDRC_ARM_GEN3
 
+#elif defined(CONFIG_ARCH_LS1012A)
 #define GICD_BASE		0x01401000
 #define GICC_BASE		0x01402000
+
 #elif defined(CONFIG_ARCH_LS1046A)
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_NUM_FMAN			1
@@ -210,11 +189,6 @@
 
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 
-#define CONFIG_SYS_FSL_ERRATUM_A008511
-#define CONFIG_SYS_FSL_ERRATUM_A009801
-#define CONFIG_SYS_FSL_ERRATUM_A009803
-#define CONFIG_SYS_FSL_ERRATUM_A009942
-#define CONFIG_SYS_FSL_ERRATUM_A010165
 #else
 #error SoC not defined
 #endif

arch/arm/include/asm/arch-imx/cpu.h

@@ -19,7 +19,8 @@
 #define MXC_CPU_MX6UL		0x64
 #define MXC_CPU_MX6ULL		0x65
 #define MXC_CPU_MX6SOLO		0x66 /* dummy */
-#define MXC_CPU_MX6D		0x67
+#define MXC_CPU_MX6SLL		0x67
+#define MXC_CPU_MX6D		0x6A
 #define MXC_CPU_MX6DP		0x68
 #define MXC_CPU_MX6QP		0x69
 #define MXC_CPU_MX7S		0x71 /* dummy ID */

arch/arm/include/asm/arch-ls102xa/config.h

@@ -91,7 +91,6 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 #define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_FSL_ERRATUM_A008407
 
 #ifdef CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
@@ -106,7 +105,6 @@
 #define CONFIG_SYS_FSL_QSPI_BE
 #define CONFIG_SYS_FSL_DCU_BE
 #define CONFIG_SYS_FSL_SEC_MON_LE
-#define CONFIG_SYS_FSL_SEC_LE
 #define CONFIG_SYS_FSL_SFP_VER_3_2
 #define CONFIG_SYS_FSL_SFP_BE
 #define CONFIG_SYS_FSL_SRK_LE
@@ -114,11 +112,7 @@
 #define DCU_LAYER_MAX_NUM			16
 
 #ifdef CONFIG_LS102XA
-#define CONFIG_SYS_FSL_SEC_COMPAT		5
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
-#define CONFIG_SYS_FSL_ERRATUM_A008378
-#define CONFIG_SYS_FSL_ERRATUM_A009663
-#define CONFIG_SYS_FSL_ERRATUM_A009942
 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC		1
 #else
 #error SoC not defined

arch/arm/include/asm/arch-mx6/clock.h

@@ -74,7 +74,7 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num);
 void enable_ipu_clock(void);
 int enable_fec_anatop_clock(int fec_id, enum enet_freq freq);
 void enable_enet_clk(unsigned char enable);
-int enable_lcdif_clock(u32 base_addr);
+int enable_lcdif_clock(u32 base_addr, bool enable);
 void enable_qspi_clk(int qspi_num);
 void enable_thermal_clk(void);
 void mxs_set_lcdclk(u32 base_addr, u32 freq);

arch/arm/include/asm/arch-mx6/crm_regs.h

@@ -307,6 +307,9 @@ struct mxc_ccm_reg {
 /* LCFIF2_PODF on i.MX6SX */
 #define MXC_CCM_CSCMR1_LCDIF2_PODF_MASK			(0x7 << 20)
 #define MXC_CCM_CSCMR1_LCDIF2_PODF_OFFSET               20
+/* LCDIF_PIX_PODF on i.MX6SL */
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_MASK		(0x7 << 20)
+#define MXC_CCM_CSCMR1_LCDIF_PIX_PODF_OFFSET		20
 /* ACLK_EMI on i.MX6DQ/SDL/DQP */
 #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_MASK		(0x7 << 20)
 #define MXC_CCM_CSCMR1_ACLK_EMI_PODF_OFFSET		20
@@ -529,6 +532,12 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_MASK              (0x7 << 0)
 #define MXC_CCM_CSCDR2_LCDIF2_CLK_SEL_OFFSET             0
 
+/*LCD on i.MX6SL */
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_MASK		(0x7 << 6)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_CLK_SEL_OFFSET		6
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_MASK		(0x7 << 3)
+#define MXC_CCM_CSCDR2_LCDIF_PIX_PRE_DIV_OFFSET		3
+
 /* All IPU2_DI1 are LCDIF1 on MX6SX */
 #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_MASK	(0x7 << 15)
 #define MXC_CCM_CHSCCDR_IPU2_DI1_PRE_CLK_SEL_OFFSET	15
@@ -554,6 +563,12 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_MASK		(0x3 << 9)
 #define MXC_CCM_CSCDR3_IPU1_HSP_CLK_SEL_OFFSET		9
 
+/* For i.MX6SL */
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_MASK		(0x7 << 16)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_PODF_OFFSET		16
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_MASK		(0x3 << 14)
+#define MXC_CCM_CSCDR3_LCDIF_AXI_CLK_SEL_OFFSET		14
+
 /* Define the bits in register CDHIPR */
 #define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
 #define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
@@ -783,6 +798,12 @@ struct mxc_ccm_reg {
 #define MXC_CCM_CCGR3_QSPI_OFFSET				14
 #define MXC_CCM_CCGR3_QSPI_MASK					(3 << MXC_CCM_CCGR3_QSPI_OFFSET)
 
+/* i.MX6SL */
+#define MXC_CCM_CCGR3_LCDIF_AXI_OFFSET				6
+#define MXC_CCM_CCGR3_LCDIF_AXI_MASK				(3 << MXC_CCM_CCGR3_LCDIF_AXI_OFFSET)
+#define MXC_CCM_CCGR3_LCDIF_PIX_OFFSET				8
+#define MXC_CCM_CCGR3_LCDIF_PIX_MASK				(3 << MXC_CCM_CCGR3_LCDIF_PIX_OFFSET)
+
 #define MXC_CCM_CCGR3_IPU1_IPU_OFFSET				0
 #define MXC_CCM_CCGR3_IPU1_IPU_MASK				(3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET)
 #define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET			2

arch/arm/include/asm/arch-mx6/imx-regs.h

@@ -26,7 +26,7 @@
 #define APBH_DMA_ARB_END_ADDR           0x0180BFFF
 #define M4_BOOTROM_BASE_ADDR			0x007F8000
 
-#else
+#elif !defined(CONFIG_MX6SLL)
 #define CAAM_ARB_BASE_ADDR              0x00100000
 #define CAAM_ARB_END_ADDR               0x00103FFF
 #define APBH_DMA_ARB_BASE_ADDR          0x00110000
@@ -46,13 +46,9 @@
 #define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
 
 /* GPV - PL301 configuration ports */
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+	defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL))
 #define GPV2_BASE_ADDR                  0x00D00000
-#else
-#define GPV2_BASE_ADDR			0x00200000
-#endif
-
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
 #define GPV3_BASE_ADDR			0x00E00000
 #define GPV4_BASE_ADDR			0x00F00000
 #define GPV5_BASE_ADDR			0x01000000
@@ -61,6 +57,7 @@
 #define PCIE_ARB_END_ADDR               0x08FFFFFF
 
 #else
+#define GPV2_BASE_ADDR			0x00200000
 #define GPV3_BASE_ADDR			0x00300000
 #define GPV4_BASE_ADDR			0x00800000
 #define PCIE_ARB_BASE_ADDR              0x01000000
@@ -96,7 +93,7 @@
 #define WEIM_ARB_END_ADDR               0x57FFFFFF
 #define QSPI0_AMBA_BASE                 0x60000000
 #define QSPI0_AMBA_END                  0x6FFFFFFF
-#else
+#elif !defined(CONFIG_MX6SLL)
 #define SATA_ARB_BASE_ADDR              0x02200000
 #define SATA_ARB_END_ADDR               0x02203FFF
 #define OPENVG_ARB_BASE_ADDR            0x02204000
@@ -111,7 +108,8 @@
 #define WEIM_ARB_END_ADDR               0x0FFFFFFF
 #endif
 
-#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if (defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
 #define MMDC0_ARB_BASE_ADDR             0x80000000
 #define MMDC0_ARB_END_ADDR              0xFFFFFFFF
 #define MMDC1_ARB_BASE_ADDR             0xC0000000
@@ -141,19 +139,21 @@
 #define ECSPI2_BASE_ADDR            (ATZ1_BASE_ADDR + 0x0C000)
 #define ECSPI3_BASE_ADDR            (ATZ1_BASE_ADDR + 0x10000)
 #define ECSPI4_BASE_ADDR            (ATZ1_BASE_ADDR + 0x14000)
-#ifdef CONFIG_MX6SL
-#define UART5_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x18000)
-#define UART1_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x20000)
-#define UART2_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x24000)
-#define SSI1_IPS_BASE_ADDR          (ATZ1_BASE_ADDR + 0x28000)
-#define SSI2_IPS_BASE_ADDR          (ATZ1_BASE_ADDR + 0x2C000)
-#define SSI3_IPS_BASE_ADDR          (ATZ1_BASE_ADDR + 0x30000)
-#define UART3_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x34000)
-#define UART4_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x38000)
-#else
+
+#define MX6SL_UART5_BASE_ADDR       (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SLL_UART4_BASE_ADDR      (ATZ1_BASE_ADDR + 0x18000)
+#define MX6UL_UART7_BASE_ADDR       (ATZ1_BASE_ADDR + 0x18000)
+#define MX6SL_UART2_BASE_ADDR       (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SLL_UART2_BASE_ADDR      (ATZ1_BASE_ADDR + 0x24000)
+#define MX6UL_UART8_BASE_ADDR       (ATZ1_BASE_ADDR + 0x24000)
+#define MX6SL_UART3_BASE_ADDR       (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SLL_UART3_BASE_ADDR      (ATZ1_BASE_ADDR + 0x34000)
+#define MX6SL_UART4_BASE_ADDR       (ATZ1_BASE_ADDR + 0x38000)
+
 #ifndef CONFIG_MX6SX
 #define ECSPI5_BASE_ADDR            (ATZ1_BASE_ADDR + 0x18000)
 #endif
+#define UART1_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x20000)
 #define UART1_BASE                  (ATZ1_BASE_ADDR + 0x20000)
 #define ESAI1_BASE_ADDR             (ATZ1_BASE_ADDR + 0x24000)
 #define UART8_BASE                  (ATZ1_BASE_ADDR + 0x24000)
@@ -161,7 +161,6 @@
 #define SSI2_BASE_ADDR              (ATZ1_BASE_ADDR + 0x2C000)
 #define SSI3_BASE_ADDR              (ATZ1_BASE_ADDR + 0x30000)
 #define ASRC_BASE_ADDR              (ATZ1_BASE_ADDR + 0x34000)
-#endif
 
 #ifndef CONFIG_MX6SX
 #define SPBA_BASE_ADDR              (ATZ1_BASE_ADDR + 0x3C000)
@@ -176,6 +175,8 @@
 #define PWM4_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0xC000)
 #define CAN1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x10000)
 #define CAN2_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x14000)
+/* QOSC on i.MX6SLL */
+#define QOSC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x14000)
 #define GPT1_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x18000)
 #define GPIO1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x1C000)
 #define GPIO2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x20000)
@@ -198,11 +199,18 @@
 #define SRC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x58000)
 #define GPC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x5C000)
 #define IOMUXC_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x60000)
-#ifdef CONFIG_MX6SL
+#define IOMUXC_GPR_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x64000)
+#ifdef CONFIG_MX6SLL
+#define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define PXP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define EPDC_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define DCP_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x7C000)
+#elif defined(CONFIG_MX6SL)
 #define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x64000)
 #define SIPIX_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
 #define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
-#elif CONFIG_MX6SX
+#elif defined(CONFIG_MX6SX)
 #define CANFD1_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x68000)
 #define SDMA_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x6C000)
 #define CANFD2_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x70000)
@@ -215,6 +223,9 @@
 #define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000)
 #endif
 
+#define MX6SL_LCDIF_BASE_ADDR      (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define MX6SLL_LCDIF_BASE_ADDR      (AIPS1_OFF_BASE_ADDR + 0x78000)
+
 #define AIPS2_ON_BASE_ADDR          (ATZ2_BASE_ADDR + 0x7C000)
 #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
 #define AIPS3_ON_BASE_ADDR          (ATZ3_BASE_ADDR + 0x7C000)
@@ -249,7 +260,7 @@
 #define I2C3_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x28000)
 #define ROMCP_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x2C000)
 #define MMDC_P0_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x30000)
-/* i.MX6SL */
+/* i.MX6SL/SLL */
 #define RNGB_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x34000)
 #ifdef CONFIG_MX6UL
 #define ENET2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x34000)
@@ -263,6 +274,10 @@
 #define WEIM_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x38000)
 #define OCOTP_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x3C000)
 #define CSU_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x40000)
+#ifdef CONFIG_MX6SLL
+#define IOMUXC_GPR_SNVS_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x44000)
+#define IOMUXC_SNVS_BASE_ADDR        (AIPS2_OFF_BASE_ADDR + 0x48000)
+#endif
 #define IP2APB_PERFMON1_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x44000)
 #define IP2APB_PERFMON2_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x48000)
 #define MX6UL_LCDIF1_BASE_ADDR      (AIPS2_OFF_BASE_ADDR + 0x48000)
@@ -296,6 +311,8 @@
 #define I2C4_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY1_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
+/* i.MX6SLL */
+#define MTR_MASTER_BASE_ADDR        (AIPS2_OFF_BASE_ADDR + 0x7C000)
 
 #ifdef CONFIG_MX6SX
 #define GIS_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x04000)
@@ -334,7 +351,8 @@
 #define MX6SX_LCDIF1_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x20000)
 #define MX6SX_WDOG3_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x88000)
 
-#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL))
+#if !(defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL) || \
+	defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL))
 #define IRAM_SIZE                    0x00040000
 #else
 #define IRAM_SIZE                    0x00020000
@@ -348,10 +366,14 @@
 /* only for i.MX6SX/UL */
 #define WDOG3_BASE_ADDR ((is_mx6ul() ?	\
 			 MX6UL_WDOG3_BASE_ADDR :  MX6SX_WDOG3_BASE_ADDR))
-#define LCDIF1_BASE_ADDR ((is_mx6ul()) ?	\
+#define LCDIF1_BASE_ADDR ((is_cpu_type(MXC_CPU_MX6SLL)) ?	\
+			  MX6SLL_LCDIF_BASE_ADDR :		\
+			  (is_cpu_type(MXC_CPU_MX6SL)) ?	\
+			  MX6SL_LCDIF_BASE_ADDR :		\
+			  ((is_cpu_type(MXC_CPU_MX6UL)) ?	\
 			  MX6UL_LCDIF1_BASE_ADDR :		\
 			  ((is_mx6ull()) ?	\
-			  MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR))
+			  MX6ULL_LCDIF1_BASE_ADDR : MX6SX_LCDIF1_BASE_ADDR)))
 
 
 extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
@@ -672,7 +694,8 @@ struct cspi_regs {
 #define MXC_CSPICON_POL		4  /* SCLK polarity */
 #define MXC_CSPICON_SSPOL	12 /* SS polarity */
 #define MXC_CSPICON_CTL		20 /* inactive state of SCLK */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
+#if defined(CONFIG_MX6SLL) || defined(CONFIG_MX6SL) || \
+	defined(CONFIG_MX6DL) || defined(CONFIG_MX6UL)
 #define MXC_SPI_BASE_ADDRESSES \
 	ECSPI1_BASE_ADDR, \
 	ECSPI2_BASE_ADDR, \

arch/arm/include/asm/arch-mx6/mx6-pins.h

@@ -33,6 +33,8 @@ enum {
 	MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
 #include "mx6dl_pins.h"
 };
+#elif defined(CONFIG_MX6SLL)
+#include "mx6sll_pins.h"
 #elif defined(CONFIG_MX6SL)
 #include "mx6sl_pins.h"
 #elif defined(CONFIG_MX6SX)

arch/arm/include/asm/arch-sunxi/cpu_sun4i.h

@@ -97,6 +97,7 @@
 #if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
 defined(CONFIG_MACH_SUN50I)
 /* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
+#define SUNXI_SIDC_BASE			0x01c14000
 #define SUNXI_SID_BASE			0x01c14200
 #else
 #define SUNXI_SID_BASE			0x01c23800

arch/arm/include/asm/arch-zynqmp/hardware.h

@@ -18,8 +18,6 @@
 
 #define ARASAN_NAND_BASEADDR	0xFF100000
 
-#define ZYNQMP_SATA_BASEADDR	0xFD0C0000
-
 #define ZYNQMP_USB0_XHCI_BASEADDR	0xFE200000
 #define ZYNQMP_USB1_XHCI_BASEADDR	0xFE300000
 

arch/arm/include/asm/armv8/sec_firmware.h

@@ -14,7 +14,7 @@
 int sec_firmware_init(const void *, u32 *, u32 *);
 int _sec_firmware_entry(const void *, u32 *, u32 *);
 bool sec_firmware_is_valid(const void *);
-#ifdef CONFIG_ARMV8_PSCI
+#ifdef CONFIG_FSL_PPA_ARMV8_PSCI
 unsigned int sec_firmware_support_psci_version(void);
 unsigned int _sec_firmware_support_psci_version(void);
 #endif

arch/arm/include/asm/emif.h

@@ -1171,6 +1171,7 @@ struct emif_regs {
 	u32 sdram_tim1;
 	u32 sdram_tim2;
 	u32 sdram_tim3;
+	u32 ocp_config;
 	u32 read_idle_ctrl;
 	u32 zq_config;
 	u32 temp_alert_config;

arch/arm/include/asm/imx-common/hab.h

@@ -145,4 +145,6 @@ typedef void hapi_clock_init_t(void);
 
 /* ----------- end of HAB API updates ------------*/
 
+uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size);
+
 #endif