There is nothing x86-centric in this include file, and moving it will
allow for some drivers to be compile-tested on sandbox.
Signed-off-by: Tom Rini <trini@konsulko.com>
As the code is today, we get a warning about "select" statements on
"choice" options not doing anything. This is why for all of the boards
which had an 'imply MULTI_DTB_FIT_USER_DEFINED_AREA' they then also had
to set the option in the defconfig. Drop the imply lines here.
Signed-off-by: Tom Rini <trini@konsulko.com>
Prune overrides of upstream jh7110.dtsi now that the required nodes are
available through the devicetree-rebasing subtree.
Signed-off-by: E Shattow <e@freeshell.de>
Sync the kernel devicetree source files for the Allwinner SoCs with
32-bit cores that do not use OF_UPSTREAM yet. The files were taken
from a v6.18-rc1 tree.
To maintain ABI compatibility with existing LTS kernels, one change
moving some IP blocks to the r_intc interrupt controller is excluded.
This effectively reverts Linux commits 994e5818392c and 9fdef3c3d8c2.
This commit also adds a new board devicetree for the A33 Vstar board,
plus one DT overlay for the OrangePi Zero interface board.
This update should not impact any existing U-Boot functionality.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Sync the devicetree files from the official Linux kernel tree, v6.18-rc1.
This is covering Allwinner SoCs with 64-bit ARM cores.
The bulk is cosmetic changes: board model name changes, DT node renames,
whitespace fixes.
The actual changes are not dramatic: the CPU cores get their caches
described properly, some A64 video clocks get fixed, some A64 boards
describe the header pins for the WiFi module, the Pinephone adds an
alternative magnetometer used on some board revisions.
On the H5 side the microSD slots get marked as having no write-protect
detection, and the NanoPi Neo Plus2 board describes its regulators better.
The H6 boards switch from RSB to I2C for their PMIC connection.
As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A80 SoCs (sun9i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the A80 related .dts and .dtsi files, and switch
most of sun9i boards over to use OF_UPSTREAM.
There is the Sunchip CX-A99 (family of) board(s) for which we don't have
a DT in the kernel tree. Keep the .dts file in the legacy U-Boot DT
directory, and let the board's defconfig opt out of OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner T113-s3 SoC (sun20i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the T113-s3 related .dts and .dtsi files, and
switch the whole SoC (represented by just one board) over to use
OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The H6 and H616 DRAM initialisation code recently gained a joint and
improved size detection routine, which helped to avoid the occasional
DRAM size misdetection.
Use the same code for the A523 DRAM initialisation as well, which
suffers from the same misdetection at times.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chen-Yu Tsai <wens@kernel.org>
The idiom used in save_boot_params is common for armv7.
In armv8 is much easier to do the same thing with adr/adrp.
So let's simplify the code a bit.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
With the memory map configuration being done dynamically, reserve extra
space during U-Boot relocation to ensure we have enough for the fixups.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
K3 platforms have reserved memory regions for TFA and OPTEE which should
be unmapped for U-Boot. While other "no-map" memory regions like the
memory pools for remote cores should not be unmapped to allow U-Boot to
load firmware during remoteproc.
Therefore this patch adds the necessary fdt fixups to properly set the
load address for TFA/OPTEE and unmaps both by mmu_unmap_reserved_mem.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
The boot flow in K3 platforms requires the subsequent boot stages to be
aware of the memory reserved for previous boot binaries. In the regular
boot sequence of:
R5 SPL -> ATF -> OP-TEE -> A-core SPL -> U-Boot -> Kernel,
Both A-core SPL and U-Boot should be made aware of the memory reserved
for ATF and OP-TEE from their device-tree. Currently this information is
absent.
Therefore this patch adds the reserved-memory regions as part of
spl_perform_arch_fixups for the next stage's DT. This is called during
both R5 and A-core SPL which fixes up the DT for their respective next
stages: A-core SPL and U-Boot proper.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
The current spl_board_fixups API allows for modification of spl_image
before the SPL jumps to it. This can be used to modify the DT for the
next boot stage, however the current API only allows either the machine
arch or the board to use it.
This limits the utility of the API as there might be certain fixups that
should be applied to all boards sharing the same machine architecture
with others being board specific.
For TI's K3 specifically, this prevents us from performing architecture
level fixups since a lot of TI boards are already making use of the
spl_board_fixups API.
Therefore this patch splits the API into two to allow both board and the
architecture specific fixups. The order is kept as arch then board to
give board specific fixups the precedence.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
For armv8, U-Boot uses a static map defined as 'mem_map' for configuring
the MMU's page tables, done by mmu_setup.
Though this works well for simpler platforms, it makes creating runtime
carveouts by modifying the static array at runtime exceedingly complex
like in mach-snapdragon/board.c.
Creation of such carveouts are much better handled by APIs such as
mmu_change_region_attr once the page tables are configured. Usually such
carveouts are configured via the device-tree's reserved-memory node
which provides the address and size for the carveout.
Therefore this patch adds mmu_unmap_reserved_mem which acts as a wrapper
over mmu_change_region_attr, helping unmap a reserved-memory region.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
The static memory map for K3 (k3_mem_map) only maps the first DRAM bank
and therefore doesn't scale for platforms with multiple memory banks.
This patch modifies enable_caches to add mem_map_from_dram_banks which
appends all the memory banks to k3_mem_map before calling mmu_setup.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
For armv8, U-Boot uses a static map defined as 'mem_map' for configuring
the MMU as part of mmu_setup.
But since the exact configuration of memory banks might not be known at
build time, many platforms such as imx9, versal2 etc. utilize
gd->bd->bi_dram to configure the static map at runtime.
Therefore this patch adds a new API mem_map_from_dram_banks that
modifies the static map in a similar way. Allowing the caller to map all
dram banks by just passing the index to last entry in their mem_map and
it's length.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
In dcache_enable, currently the dcache entries are only invalidated when
the MMU is not enabled. This causes issues when dcache_enable is called
with the MMU already configured, in such cases the existing dcache
entries are not flushed which might result in un-expected behavior.
This patch invalidates the cache entries on every call of dcache_enable
before enabling dcache (by setting CR_C). This makes dcache_enable
behave similar to icache_enable as well.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
The mmu_setup function configures the page tables based on the board
supplied mem_map struct array. It is called implicitly as part of
dcache_enable but this limits us to only be able to use APIs such as
mmu_change_region_attr only after caches are enabled.
This might lead to speculative accesses before we can unmap a region
that is marked as cacheable in the static memory map.
Therefore this patch exports the mmu_setup function in mmu.h allowing
users to have more control over when the mmu is configured.
For K3 specifically this allows for the following configuration sequence
as part of enable_caches:
static mem_map fixups (TODO) -> mmu_setup -> carveouts using
mmu_change_region_attr (TODO) -> icache/dcache enable
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
U-Boot's provided enable_caches enforces the following sequence:
icache_enable -> mmu_setup (as part of dcache_enable) -> dcache_enable
Whereas for K3 devices, we would like to add entries to the provided
static array (k3_mem_map) as per gd->bd->bi_dram and then call mmu_setup
to configure the MMU but also create carveouts for TFA/TEE before we
enable caches to prevent speculative accesses to the region. Thus the
following desired sequence:
add dram banks -> mmu_setup -> carveout TFA/TEE -> icache/dcache enable
Therefore this patch adds K3's own implementation of enable_cache for
ARM64, allowing for greater control over the cache enablement sequence.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
The K3 family of SoCs encompasses a wide variety of devices with varying
DDR configurations and memory carveout requirements, the current static
memory map provides basic support for TI EVMs but does not scale well
for newer platforms (such as AM62SiP with 512MiB of RAM).
Therefore this patch replaces the existing memory map with a minimal
one, that could be more easily modified at runtime.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
First set of u-boot-at91 features for the 2026.01 cycle:
This small fixes set includes a change on clocks register value and a
fix for the sam9x60ek default timer.
This reverts commit a040578d82.
Based on feedback other SOCs (for example Star64) are using driver in non
DMA mode which is causing issues that's why revert this patch.
cdns,is-dma should be removed differently.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reported-by: E Shattow <e@freeshell.de>
As requirement of CR side, QSPI Flash usage via RPC driver shall
be disabled and leaving the control of this module to CR side.
Perform DT modification to disable the RPC SPI.
Signed-off-by: Nguyen Tran <nguyen.tran.pz@bp.renesas.com>
Reviewed-by: Khanh Le <khanh.le.xr@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[Marek: Do not modify defconfig, modify the DT instead, this way
the RPC SPI can be enabled without recompiling the U-Boot
itself. Update commit message accordingly.]
Commit 63da3a795e ("ARM: dts: renesas: Drop R8A779H0 V4M DTs with OF_UPSTREAM counterparts")
removed unnecessary V4H DTs from arch/arm/dts , but in the process
also incorrectly dropped the -u-boot.dtsi U-Boot extras. Reinstate
those extras.
Due to DT file name change for the R8A779H0 V4M Gray Hawk, update
the r8a779h0-gray-hawk-u-boot.dtsi filename to newly matching
r8a779h0-gray-hawk-single-u-boot.dtsi .
Align r8a779h0-u-boot.dtsi with clean up commits
1487c34efa ("arm64: dts: renesas: Deduplicate extalr_clk bootph-all")
dd8f57ed2f ("ARM: dts: renesas: Drop most of bootph-* tags")
Fixes: 63da3a795e ("ARM: dts: renesas: Drop R8A779H0 V4M DTs with OF_UPSTREAM counterparts")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
U-Boot currently enables the UPLL during boot, which triggers a udelay()
call that depends on the system tick timer. Since no explicit tick source
is defined in the device tree, boot stalls on this board.
Define the "tick-timer" property under /chosen and point it to the PIT
node, ensuring U-Boot uses the PIT as the tick source.
Fixes: ac30d90f33 ("clk: Ensure the parent clocks are enabled while reparenting")
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
This partly fix commit 726404a66c ("airoha: rework RAM size handling
to support multiple RAM size")
The function get_effective_memsize() do not see non-global defines
of CFG_MAX_MEM_MAPPED, so the effective memory size will not be changed.
Fix the issue by putting definition of CFG_MAX_MEM_MAPPED to the proper
place.
Fixes: 726404a66c ("airoha: rework RAM size handling to support multiple RAM size")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Enable CONFIG_OF_UPSTREAM to receive automatic
device tree updates for the Verdin AM62P.
Remove the now-obsolete device tree files:
- k3-am62p-verdin.dtsi
- k3-am62p-verdin-dev.dtsi
- k3-am62p-verdin-wifi.dtsi
- k3-am62p5-verdin-wifi-dev.dts
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Given how these options are used in the code, it doesn't make sense to
enable them for COMPILE_TEST. Make them depend on !COMPILE_TEST.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert the PXA1908 platform and its coreprimevelte board to OF_UPSTREAM
and enable the few drivers found in the upstream DTS.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
When I migrated this to Kconfig in commit 68e54040cc ("sandbox: Move
CONFIG_IO_TRACE to Kconfig") I didn't look hard enough for other
details. As explained in the README, this is valid for ARM too. So start
by making this be a prompted question and CMD_IOTRACE depend on IO_TRACE
being enabled. Next, migrate the information out of README and in to
the appropriate help text for existing options in Kconfig. Finally, make
this option be default y on SANDBOX but not selected as it's valid to
build without it.
Signed-off-by: Tom Rini <trini@konsulko.com>
The way that the current readX/writeX macros are implemented on sandbox
means that when IO_TRACE is not enabled some code will throw up
incorrect warnings due to how sandbox_{read,write} is implemented. We
instead need to do the "uX __v; __v = sandbox..(..v); __v;" trick that
ARM does.
Signed-off-by: Tom Rini <trini@konsulko.com>
We have had an implementation of the generic timer found in many v7m
chips since 2017, but as part of the Kconfig migration forgot to allow
it as it wasn't being used at the time. Allow it to be built.
Signed-off-by: Tom Rini <trini@konsulko.com>
Enable CONFIG_OF_UPSTREAM to receive automatic device tree updates for
the Toradex SMARC iMX8MP.
Remove the now obsolete device tree files:
- imx8mp-toradex-smarc-dev.dts
- imx8mp-toradex-smarc.dtsi
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
DTC is generating warnings about missing port like:
DTOVL arch/arm/dts/zynqmp-smk-k24-revA-sck-kv-g-revB.dtb
arch/arm/dts/zynqmp-sck-kv-g-revA.dtbo: Warning (graph_port):
/fragment@5/__overlay__: graph port node name should be 'port'
...
That's why change description and add it directly to dpsub mode to contain
full description with also port.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/576630cc9696e21bef15bd1f0ca35e396adc4eca.1758529693.git.michal.simek@amd.com
On a few zcu106 boards USB devices (Dell MS116 USB Optical Mouse, Dell USB
Entry Keyboard) are not enumerated on linux boot due to commit
'b8745e7eb488 ("arm64: zynqmp: Fix usb node drive strength and slew
rate")'.
To fix it as a workaround revert to working version and then investigate
at board level why drive strength from 12mA to 4mA and slew from fast to
slow is not working.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/14d3408cf547ac188c07c10abb0ddfaac9d915c4.1756803198.git.michal.simek@amd.com
