The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: ec2933e543 ("board: stm32mp1: move set_dfu_alt_info in st common directory")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
This patch adds i.MX95 19x19 EVK board basic support.
Messaging unit for EdgeLock Secure Enclave, messaging unit for System
Manager, uSDHC for SD Card, gpio, lpuart are supported now.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
The PMIC is not yet supported in mainline, but the work is ongoing.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Initialize the ESM & PMIC ESM. This allows things like
the watchdog to reset the board when tripped.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Just enable dfu options, We have MMC and RAM as options here.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Most of the users of BeagleY-AI are headless OR do not use serial port.
In such cases, it is very useful for the device to provide some level of
indication to know what state their board is at.
Unfortunately, with a single LED (ignoring the :heartbeat), the
options are limited. This is a precursor patch to actually enabling
the LED options that will use the same in the follow on patches.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
We just have a single MMC on BeagleY-AI. So drop all other boot options,
In the meanwhile, we also will use efiboot and standard boot methods
consistent with other K3 Beagle products.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
just use beagley_ai as pattern match for the files and folders involved.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
enable text based default U-Boot Environment by enabling
CONFIG_ENV_SOURCE_FILE
and adding default environment file:
board/siemens/capricorn/capricorn_cxg3.env
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Siemens have some defconfigs for different hardware versions,
all based on mainline cxg3 board. For easier updating the
downstream defconfigs, move common settings into new file.
configs/imx8qxp_capricorn.config
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Walter Schweizer <walter.schweizer@siemens.com>
Fixup previous merge resolution of this series. Intent is to ease code
readability and logic to match ordering in CONFIG_OF_LIST
- Remove "starfive/" string math
- Remove redundant local cache of calls to get_*_from_eeprom()
- Match name before EEPROM product_id in board_fit_config_name_match()
- Remove single-consumer FDTFILE_* defines
- Do not set fdtfile for visionfive-2-* when unknown model revision
Fixes: 5a0a93a768 ("Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv")
Signed-off-by: E Shattow <e@freeshell.de>
We support all JH7110 boards with starfive_visionfive2_defconfig.
The relevant device-tree is selected at runtime based on EEPROM data.
Support setting $fdtfile to the file name of the DeepComputing Framework
motherboard (FML13V01) device-tree.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: E Shattow <e@freeshell.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
For nor0 boot for the STMicroelectronics boards, the bootfs
is found in SD-Card = mmc0 for nor0 boot.
Introduce a new file configuration file stm32mp25_st_common.h
to manage this specific behavior for the STMicroelectronics
boards; change the boot order for nor0 boot and don't use
the default DISTRO order define in BOOT_TARGET_DEVICES:
mmc1, ubifs, mmc0, mmc2.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice CHOTARD <patrice.chotard@foss.st.com>
Add support of UBI boot and activate the needed
configuration for U-Boot environment in UBI volume for
NAND or in a MTD partition for NOR device, SPI Flash:
ENV_OFFSET, ENV_OFFSET_REDUND, ENV_SECT_SIZE is
aligned with the default MTD partition on NOR device
of the STMicroelectronics boards.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add led support, force default state on U-Boot initialization and put on
the Linux heartbeat led = "blue-led" during U-Boot execution.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Use the boot instance to select the correct mmc device identifier,
this patch only to save the environment on eMMC = MMC(1) on
STMicroelectronics boards.
Set the CONFIG_SYS_MMC_ENV_DEV to -1 to select the mmc boot instance
by default.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
In case of several environment location support, env_get_location
is needed to select the correct location depending of the boot
device .
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
U-Boot DT for stm32mp157c-odyssey is richer than the kernel DT one.
None of the stm32mp157c-odyssey's contributors answered to my request
to update kernel DT and i didn't have this board to test.
The simpler is to add a dedicated stm32mp15-odyssey_defconfig with
OF_UPSTREAM flag unset.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Refactor inside-out EEPROM-checking logic to better match the board-seeking
callback and ordered list of targets from starfive_visionfive2_config since
the JH7110 OF_UPSTREAM migration.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
We support all JH7110 boards with starfive_visionfive2_defconfig.
The relevant device-tree is selected at runtime based on EEPROM data.
Support setting $fdtfile to the file name of the DeepComputing Framework
motherboard (FML13V01) device-tree.
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <e@freeshell.de>
Add match N:starfive pattern to visionfive2 board. Now
starfive pattern just related to JH7110 IC.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Marek Vasut <marex@denx.de>
CONFIG_OF_BOARD isn't enabled on SiFive Unleashed and Unmatched, thus
board_fdt_blob_setup is actually dead code on these platforms. Let's
remove it.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The default version should work for Starfive VisionFive 2.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Add TI_COMMON_CMD_OPTIONS config options to Sitara K3 boards at
a53 stage since we rely on most of the commands implied for testing
and debugging purposes. Since all commands are now enabled by
default, remove the redundant CMD_* options in the a53 defconfigs.
Also add MMC_REG & MMC_SPEED_MODE_SET useful commands to
TI_COMMON_CMD_OPTIONS.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
u-boot-dfu-20250425
Usb gadget:
- Fix ACM gadget release
- Allow ACM gadget restart after releasing it
- Add 'enabled' flag to usb_ep structure
DFU:
- Fix alt buffer clearing for DeveloperBox board
Add a minimal generic RK3399 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3399 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add a minimal generic RK3328 board that only have eMMC, SDMMC, SPI flash
and USB OTG enabled. This defconfig can be used to boot from eMMC,
SD-card or SPI flash on most RK3328 boards that follow reference board
design.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576
SoC. This adds the needed board infrastructure and config for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The build system uses HAVE_VENDOR_COMMON_LIB to automatically include
board/$(VENDOR)/common/Makefile, therefore let's use that to implicitly
include board/theobroma-systems/common/Makefile and compile the common.c
file when building proper.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The tests in test/dm/eth.c and test/dm/dsa.c use interfaces that have
no static IP addresses configured in the board's default environment
file. That will be a problem when NET_LWIP=y because the lwIP stack
refuses to send ICMP packets through an interface that doesn't have an
IP ("no route to host"). Therefore and in preparation for enabling the
sandbox tests with NET_LWIP, provide such addresses in
board/sandbox/sandbox.env.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The set_dfu_alt_info() function calls the ALLOC_CACHE_ALIGN_BUFFER()
macro to declare a `buf' variable pointer into an array allocated on the
stack. It then calls the memset() function to clear the useable portion
of the array using the idiomatic expression `sizeof(buf)'.
While this would indeed work fine for an array, in the present case we
end up clearing only the size of a pointer.
Fix this by specifying the explicit size `DFU_ALT_BUF_LEN' instead.
Fixes: 6b403ca4dc ("fwu: DeveloperBox: add support for FWU")
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahisa Kojima <kojima.masahisa@socionext.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20250407170529.893307-2-vincent.stehle@arm.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
This is a huge series which promoted MIPS/Boston target into a
usable state, with fixes to drivers and general framework issues
I found in this process.
I also converted the target to OF_UPSTREAM.
This target is covered by QEMU, to test on QEMU:
```
make boston64r6el_defconfig
make
qemu-system-mips64el -M boston -cpu I6500 -bios ./u-boot.bin -nographic
```
Link: https://lore.kernel.org/r/20240517-boston-v3-0-1ea7d23f4a1d@flygoat.com
Paul had left MIPS a couple of years ago, his email address is
no longer valid.
Replace it with his kenrel.org email, which has been used in
kernel and QEMU, in case we still want to reach him.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Provide default environment variables on image loading address
to make the board useful.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Add the follow board to VIRT which otherwise would be unmaintained:
* qemu-riscv64_smode_acpi_defconfig
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
