Tested on HiFive Unleashed and HiFive Unmatched, both SPIFlash and MMC boot.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Rockchip RK3506 is a ARM-based SoC with tri-core Cortex-A7.
Add initial arch support for the RK3506 SoC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # drivers/usb/gadget
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Philip Molloy <philip@philipmolloy.com> says:
This series updates the maintainers for the ADI ADSP platform. It
follows Greg's series adding support for ADI ADSP SoCs.
Timesys spent years developing and maintaining Linux support for ADI
ADSP SoCs. The maintenance contract has ended and ADI has brought that
effort in-house. Additionally, Timesys was acquired by another company.
Thanks to everyone at Timesys for all of their hard work over the years!
Link: https://lore.kernel.org/r/20260226111136.354009-1-philip@philipmolloy.com
After years of developing the ADI ADSP platform, Timesys was purchased
by another company and is no longer contracted to maintain the platform.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Reviewed-by: Greg Malysa <malysagreg@gmail.com>
Commit 067c1b0332 ("ufs: Call ufs_scsi_bind() from uclass .post_bind")
inlined ufs_scsi_bind() into ufs_post_bind() as trivial
device_bind_driver() call.
ufs_scsi_bind() is no longer referenced anywhere in the codebase, so
drop its declaration from include/ufs.h.
Drivers used to include <ufs.h> to include prototype of ufs_scsi_bind()
function, so we can now safely remove such includes.
Fixes: 067c1b0332 ("ufs: Call ufs_scsi_bind() from uclass .post_bind")
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260203-cleanup-ufs-header-v1-1-4c10424485f0@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
With ENV_WRITEABLE_LIST only specific environment variables lisetd in
CFG_ENV_FLAGS_LIST_STATIC are read from the u-boot environment storage.
All other environment variables are set to default values and are not
written back to the storage.
The u-boot environment usually stays for the lifetime of the product.
There is no A/B copy mechanism as for the firmware itself. That means
that incompatible changes to environment variables in future u-boot
versions may lead to serious issues if the old environment is used with
a new u-boot version or vice versa.
Having this protection in place ensures that only a limited set of
environment variables are persisted across u-boot versions. All the
macros not listed in CFG_ENV_FLAGS_LIST_STATIC are now part of the
u-boot binary which is redundant and immutable. This guarantees that
the u-boot version and the default values of these environment variables
are always in sync and cannot be changed at runtime.
ustate and rastate are not relevant for u-boot itself. ustate is used
by swupdate which persists the transaction state in the environment.
rastate is a similar variable used by another user space application.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Add a new regulator driver for MT6359P and similar PMIC chips.
The MT6359P is a eco version for MT6359 regulator. For the MT8391
platform, we use the MT6359P (MT6365) as the main PMIC. The MT6359 and
MT6359P have different register maps. Therefore, on the MT8391 platform,
we only provide support for the MT6359P. If support for the MT6359 PMIC
it can be added later.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
STM32MP21 application processors (STM32 MPUs) based on a single
Arm Cortex®-A35 core running up to 1.5 GHz and Cortex®-M33 core
running at 300 MHz.
It is pin-compatible with the STM32MP2 series in the VFBGA361
10×10 mm package: the STM32MP21 uses a subset of the STM32MP23
pinout, which itself is a subset of the STM32MP25.
More details available here :
https://www.st.com/en/microcontrollers-microprocessors/stm32mp2-series.html
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Niko Mauno <niko.mauno@vaisala.com> says:
In this series, we first introduce a clean-up where we switch to use
predefined bit masks instead of hard-coded values for count and magic
halves in the single-word (32-bit) boot count scheme.
Then we fix a case of missing boot count value masking in single-word
scenario in bootcount.c, which allowed clobbering of the magic half
when storing the value. With this change the clobbering preventing
behavior becomes consistent with existing single word bootcount storing
implementations in bootcount_at91.c and bootcount_davinci.c.
Finally, we enable the DM I2C bootcount driver to work also in single
word (4 byte) mode, in addition to the pre-existing half-word (2 byte)
mode. By default the driver still operates in half word mode as so far,
but can now be used alternatively in single word mode by adding
'size = <0x4>;' in the associated device tree node.
Link: https://lore.kernel.org/r/cover.1770197302.git.niko.mauno@vaisala.com
Use predefined bit masks in operations where only the magic half or
only the count half of the 32-bit value are processed.
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Raymond Mao <raymondmaoca@gmail.com> says:
From: Raymond Mao <raymond.mao@riscstar.com>
This series finish the last missing puzzle of required SMBIOS types by:
1) Fixing duplicated handles when multiple instances exist in one type;
2) Implementing the rest of required types 9/16/17/19;
3) Adding version control when printing properties for all types.
Type 9/16/17/19 are generally DT-based, the idea is to write these tables
using a hybrid approach:
Explicit DT definitions under existing '/smbios/smbios' take precedence,
with fallback to scan and interpret values from the entire DT.
Moreover, all below APIs:
smbios_get_val_si()
smbios_get_u64_si()
smbios_add_prop_si()
are on top of sysinfo, thus allow vendors to get values from other
subsystems by implementing their own sysinfo driver if needed.
Link: https://lore.kernel.org/r/20260213225254.2544596-1-raymondmaoca@gmail.com
By checking the payload length, we can know the version of the spec and
skip the ones which are not expected to exist.
Signed-off-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This commit implements SMBIOS Type 19 (Memory Array Mapped Address)
generation with a hybrid approach supporting both:
1. Explicit definition via Device Tree 'smbios' node:
Child node under '/smbios/smbios/memory-array-mapped-address' will be
used to populate as individual Type 19 structure directly.
- Properties follow SMBIOS field names with lowercase letters and
hyphen-separated words (e.g., 'starting-address', 'ending-address',
'partition-width', etc.).
- This method supports precise platform-defined overrides and system
descriptions.
2. Fallback to automatic DT-based discovery:
If child node under '/smbios/smbios/memory-array-mapped-address' does
not exist, the implementation will:
- Scan all top-level 'memory@' nodes to populate Type 19 structure with
inferred size and location data.
- Scan nodes named or marked as 'memory-controller' and parse
associated 'dimm@' subnodes (if present) to extract DIMM sizes and
map them accordingly.
This dual-mode support enables flexible firmware SMBIOS reporting while
aligning with spec-compliant naming and runtime-detected memory topology.
Type 19 support is under GENERATE_SMBIOS_TABLE_VERBOSE to avoid
increasing rom size for those platforms which only require basic SMBIOS
support.
Signed-off-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This commit implements SMBIOS Type 17 (Memory Device) generation with a
hybrid approach supporting both:
1. Explicit definition via Device Tree 'smbios' node:
Child node under '/smbios/smbios/memory-device' will be used to
populate as individual Type 17 structure directly.
- Properties follow SMBIOS field names with lowercase letters and
hyphen-separated words (e.g., 'physical-memory-array-handle',
' memory-error-information-handle', 'configured-memory-speed', etc.).
- This method supports precise platform-defined overrides and system
descriptions.
2. Fallback to automatic DT-based discovery:
If child node under '/smbios/smbios/memory-device' does not exist,
the implementation will:
- Scan all top-level 'memory@' nodes to populate Type 17 structure with
inferred size and location data.
- Scan nodes named or marked as 'memory-controller' and parse
associated 'dimm@' subnodes (if present) to extract DIMM sizes and
map them accordingly.
This dual-mode support enables flexible firmware SMBIOS reporting while
aligning with spec-compliant naming and runtime-detected memory topology.
Type 17 support is under GENERATE_SMBIOS_TABLE_VERBOSE to avoid
increasing rom size for those platforms which only require basic SMBIOS
support.
Signed-off-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This commit implements SMBIOS Type 16 (Physical Memory Array)
generation with a hybrid approach supporting both:
1. Explicit definition via Device Tree 'smbios' node:
Child node under '/smbios/smbios/memory-array' will be used to
populate as individual Type 16 structure directly.
- Properties follow SMBIOS field names with lowercase letters and
hyphen-separated words (e.g., 'memory-error-correction',
'maximum-capacity', 'extended-maximum-capacity', etc.).
- This method supports precise platform-defined overrides and system
descriptions.
2. Fallback to automatic DT-based discovery:
If child node under '/smbios/smbios/memory-array' does not exist,
the implementation will:
- Scan all top-level 'memory@' nodes to populate Type 16 structure with
inferred size and location data.
- Scan nodes named or marked as 'memory-controller' and parse
associated 'dimm@' subnodes (if present) to extract DIMM sizes and
map them accordingly.
This dual-mode support enables flexible firmware SMBIOS reporting while
aligning with spec-compliant naming and runtime-detected memory topology.
Type 16 support is under GENERATE_SMBIOS_TABLE_VERBOSE to avoid
increasing rom size for those platforms which only require basic SMBIOS
support.
Signed-off-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This commit introduces support for generating SMBIOS Type 9 (System Slot)
tables using a hybrid approach:
1. Explicit Device Tree definitions:
Child node under '/smbios/smbios/system-slot' will be interpreted as
individual slot definitions.
- Each child represents a slot (e.g., isa, pcmcia, etc.).
- Properties follow the SMBIOS specification using lowercase
hyphen-separated names such as 'slot-type', 'slot-id',
'segment-group-number', 'bus-number', 'slot-information', etc.
- This approach allows full customization of each system slot and is
especially suitable for platforms with well-defined slot topology.
2. Automatic detection fallback:
If child node under '/smbios/smbios/system-slot' does not exist, the
implementation will scan the entire device tree for nodes whose
'device_type' matches known slot-related types ("pci", "isa", "pcmcia",
etc.).
- When a match is found, default values or heuristics are applied to
populate to the System Slot table.
- This mode is useful for platforms that lack explicit SMBIOS nodes
but still expose slot topology via standard DT conventions.
Together, two approaches ensure that SMBIOS Type 9 entries are available
whether explicitly described or automatically derived.
Signed-off-by: Raymond Mao <raymondmaoca@gmail.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Peng Fan (OSS) <peng.fan@oss.nxp.com> says:
This patch set primarily removes unused DECLARE_GLOBAL_DATA_PTR
instances.
Many files declare DECLARE_GLOBAL_DATA_PTR and include
asm/global_data.h even though gd is never used. In these cases,
asm/global_data.h is effectively treated as a proxy header, which is
not a good practice.
Following the Include What You Use principle, files should include
only the headers they actually depend on, rather than relying on
global_data.h indirectly. This approach is also adopted in Linux kernel
[1].
The first few patches are prepartion to avoid building break after
remove the including of global_data.h.
A script is for filtering the files:
list=`find . -name "*.[ch]"`
for source in ${list}
do
result=`sed -n '/DECLARE_GLOBAL_DATA_PTR/p' ${source}`
if [ "${result}" == "DECLARE_GLOBAL_DATA_PTR;" ]; then
echo "Found in ${source}"
result=`sed -n '/\<gd\>/p' ${source}`
result2=`sed -n '/\<gd_/p' ${source}`
result3=`sed -n '/\<gd->/p' ${source}`
if [ "${result}" == "" ] && [ "${result2}" == "" ] && [ "${result3}" == "" ];then
echo "Cleanup ${source}"
sed -i '/DECLARE_GLOBAL_DATA_PTR/{N;/\n[[:space:]]*$/d;s/.*\n//;}' ${source}
sed -i '/DECLARE_GLOBAL_DATA_PTR/d' ${source}
sed -i '/global_data.h/d' ${source}
git add ${source}
fi
fi
done
[1] https://lpc.events/event/17/contributions/1620/attachments/1228/2520/Linux%20Kernel%20Header%20Optimization.pdf
CI: https://github.com/u-boot/u-boot/pull/865
Link: https://lore.kernel.org/r/20260209-cleanup-v2-0-73a3a84ddbdb@nxp.com
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <anshuld@ti.com> #TI boards
Acked-by: Yao Zi <me@ziyao.cc> #TH1520
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Since commit 27cc5951c8 ("include: env: ti: add default for
do_main_cpsw0_qsgmii_phyinit"), the value of the environment variable
do_main_cpsw0_qsgmii_phyinit happened to remain '0' and couldn't be
changed without user intervention. This behavior is due to the following
cyclic dependency:
A) ti_common.env sets do_main_cpsw0_qsgmii_phyinit to '0' and its value
can only be updated automatically by main_cpsw0_qsgmii_phyinit.
B) main_cpsw0_qsgmii_phyinit is defined in j721e.env and it can run only
if 'do_main_cpsw0_qsgmii_phyinit' is already '1' which isn't possible
unless the user manually assigns the value.
Fix the aforementioned cyclic dependency by using board_late_init() to
detect the QSGMII Daughtercard and set do_main_cpsw0_qsgmii_phyinit.
Additionally, to address the issue of do_main_cpsw0_qsgmii_phyinit being
'undefined' for other platforms, replace:
if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1;
with:
if env exists do_main_cpsw0_qsgmii_phyinit;
in ti_common.env.
Fixes: 27cc5951c8 ("include: env: ti: add default for do_main_cpsw0_qsgmii_phyinit")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
efi_var_to/from_file() suggest method where variables are placed. But there
is no reason for it and generic name can be used to wire also different
locations for variables.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on AML-S905D3-CC
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Currently efi_var_file.c has functions to store/read
EFI variables to/from memory buffer. These functions
can be used with other EFI variable stores so move
them out to efi_var_common.c
Signed-off-by: Shantur Rathore <i@shantur.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on AML-S905D3-CC
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Refactor the part_get_info_extended() helper function (which already
recursively traverses DOS partitions) to optionally return the raw MBR
partition structure (dos_partition_t).
This allows other subsystems, such as EFI, to retrieve the partition
details in the legacy MBR format.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Now that dos_partition_t and struct partition are identical, the duplicated
data structure definition in the part_efi.h header can just be removed.
This results in a single, shared definition for MBR partition table
entries, instead of having the same definition in two different places.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The dos_partition_t struct defined in part_dos.h is nearly identical to
the struct partition defined in part_efi.h. They differ primarily in how
define their starting sector and number of sectors fields.
The former uses unsigned char arrays while the latter uses __le32 types.
Using __le32 is preferable, as it removes the ambiguity and potential
misuse of a raw byte array. This also aligns the structure with how the
Linux kernel defines it nowadays, which is the original source of it.
To prepare for future consolidation where one of the data structures can
be removed, this change aligns both definitions and updates all accessors
for dos_partition_t.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
There are two different struct definitions for MBR partition table
entries: one in part_dos.h and a nearly identical one in part_efi.h.
To enable future consolidation of these two structures, move part_dos.h
to the main include directory. This makes it accessible from other parts
of the codebase, such as part_efi.h, and is the first step toward removing
the redundant definition.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
TARGET namespace is for machines / boards / what-have-you that
building U-Boot for. Simply replace from TARGET to ARCH
make things more clear and proper for ALL SoCFPGA.
Signed-off-by: Brian Sune <briansune@gmail.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
# Conflicts:
# drivers/ddr/altera/Makefile
The spi_slave_of_to_plat() is called from one place, spi_child_post_bind().
Squash it into the later and remove the public declaration, make this
function local static. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Although the pinctrl pm requests are implemented in the PMU firmware,
PM_QUERY_DATA is actually implemented in ATF. In SPL (or when running in
EL3), ATF is not yet running, so we need to implement this API
ourselves. Do the bare minimum, allowing SPL to enumerate functions, but
don't bother with groups. Groups take up a lot of space, and can be
emulated with pins. For example, a node like
display-port {
mux {
groups = "dpaux0_1";
function = "dpaux0";
};
};
can be replaced by
display-port {
mux {
pins = "MIO34", "MIO35", "MIO36", "MIO37";
function = "dpaux0";
};
};
While this isn't backwards-compatible with existing devicetrees, it's
more than enough for SPL where we may only need to mux one or two pins.
Add SPL_PINCTRL_ZYNQMP to ensure there's no SPL size growth when pinctrl
is enabled in U-Boot but isn't necessary for SPL. The only config this
would affect is Kria, but SPL_PINCTRL_GENERIC is disabled so
SPL_PINCTRL_ZYNQMP is not selected.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260129184011.3932790-1-sean.anderson@linux.dev
Add get_next_memory_node() function declaration to fdtdec.h to support
iterating through multiple memory nodes in device tree. This function
is used to enumerate memory banks when the system has non-contiguous
or multiple memory regions defined with device_type = "memory".
The function implementation already exists in lib/fdtdec.c (lines
1298-1305) but was missing the public declaration in the header file.
This patch adds the declaration and includes dm/ofnode_decl.h for the
ofnode type definition.
This is needed for platforms that require early memory enumeration
before standard fdtdec_setup_memory_banksize() is called, particularly
for dynamic MMU page table size calculation based on actual DRAM
configuration.
Signed-off-by: Pranav Sanwal <pranav.sanwal@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20260129120021.1328653-2-pranav.sanwal@amd.com
Change fwu_state_machine_updates() to accept an enum fwu_bank_states
parameter instead of a boolean. This makes the function interface more
explicit and prepares for adding FWU_BANK_INVALID support to handle
boot failures on the active bank.
Convert the FWU_BANK_* defines to an enum and update all call sites
accordingly.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
First set of u-boot-at91 features for the 2026.04 cycle:
This small fixes set includes fixing 64 bit builds and some warnings for
the at91 serial driver, and some cleanup on the nand driver.
The only call site of gzwrite() is cmd/unzip.c do_gzwrite(), where
the 'len' parameter passed to gzwrite(..., len, ...) function is of
type unsigned long. This usage is correct, the 'len' parameter is
an unsigned integer, and the gzwrite() function currently supports
input data 'len' of up to 4 GiB - 1 .
The function signature of gzwrite() function in both include/gzip.h
and lib/gunzip.c does however list 'len' as signed integer, which
is not correct, and ultimatelly limits the implementation to only
2 GiB input data 'len' .
Fix this, update gzwrite() function parameter 'len' data type to
size_t consistently in include/gzip.h and lib/gunzip.c .
Furthermore, update gzwrite() function 'szwritebuf' parameter in
lib/gunzip.c from 'unsigned long' to 'size_t' to be synchronized
with include/gzip.h . Rewrite the other parameters to size_t and
off_t and propagate the change too.
Since the gzwrite() function currently surely only supports input
data size of 4 GiB - 1, add input data size check. The limitation
comes from the current use of zlib z_stream .avail_in parameter,
to which the gzwrite() function sets the entire input data size,
and which is of unsigned int type, which cannot accept any number
beyond 4 GiB - 1. This limitation will be removed in future commit.
Reported-by: Yuya Hamamachi <yuya.hamamachi.sx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Pointer size cannot be assumed to be 32-bit, so use uintptr_t instead of
uint32_t.
Fixes the below build warning on 64-bit builds:
drivers/serial/atmel_usart.c: In function ‘atmel_serial_probe’:
drivers/serial/atmel_usart.c:275:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
275 | priv->usart = (atmel_usart3_t *)plat->base_addr;
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Move the arch specific atmel_serial.h header from AT91 to the generic
include/dm/platform_data.
This will be used for support on Microchip LAN969x.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
With the legacy networking stack, it is possible to use USE_SERVERIP,
SERVERIP and BOOTP_PREFER_SERVERIP Kconfg options to force use of a
specific TFTP server ip.
Using the lwIP networking stack use of the 'tftpserverip' environment
variable provide the closest equivalent functionality.
Add USE_TFTPSERVERIP and TFTPSERVERIP Kconfig options that can be used
to add the 'tftpserverip' environment variable to force use of a
specific TFTP server ip.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Jerome Forissier <jerome.forissier@arm.com>
Kuan-Wei Chiu <visitorckw@gmail.com> says:
Add support for the QEMU 'virt' machine on the m68k architecture. The
QEMU virt machine models a generic system utilizing Goldfish virtual
peripherals and is capable of emulating various classic 68k CPUs.
Currently, U-Boot's m68k architecture support focuses on ColdFire
variants. This series expands support to include the classic M680x0
architecture, implementing the necessary exception vectors, startup
code, and a bootinfo parser compatible with the QEMU interface.
Drivers for Goldfish peripherals (TTY, Timer, RTC) and the QEMU
Virtual System Controller (sysreset) are also added to enable serial
console, timekeeping, and system reset functionality.
The implementation has been verified on QEMU targeting the M68040 CPU,
confirming successful hardware initialization and boot to the U-Boot
command shell. Additionally, the CI configuration was verified locally
using gitlab-ci-local "qemu_m68k_virt test.py", resulting in
PASS qemu_m68k_virt test.py.
Link: https://lore.kernel.org/r/20260107201838.3448806-1-visitorckw@gmail.com
[trini: Re-sort MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add support for the QEMU 'virt' machine on the m68k architecture. This
board emulates a generic machine based on the Motorola 68040 CPU
equipped with Goldfish virtual peripherals.
Introduce the necessary board configuration and initialization
infrastructure. The implementation includes logic to parse the QEMU
bootinfo interface, enabling dynamic detection of system RAM size to
adapt to the virtual machine's configuration.
Enable the Goldfish TTY driver for serial console output. Additionally,
enable Goldfish RTC and timer drivers to support real-time clock
functionality and nanosecond-resolution delays. Include comprehensive
documentation covering build instructions and usage examples.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
Introduce a new sysreset driver for the QEMU Virtual System Controller.
This device is found on QEMU "virt" machines (such as the m68k virt
target) and provides a mechanism to trigger system reset and power-off
events.
The driver maps U-Boot sysreset types to the corresponding controller
commands:
- SYSRESET_WARM / SYSRESET_COLD -> VIRT_CTRL_CMD_RESET
- SYSRESET_POWER_OFF -> VIRT_CTRL_CMD_HALT
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
