Following the 'commit 95b5a7de30 ("FWU: STM32MP1: Add support to
read boot index from backup register")', this patch enables reading
the boot index from backup registers on STM32MP2 platforms.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add bootph-all property in ltdc node in stm32mp257f-ev1-u-boot.dtsi
to fix the following issue :
Video device 'display-controller@48010000' cannot allocate frame buffer
memory - ensure the device is set up beforen
stm32_rifsc bus@42080000: display-controller@48010000 failed to bind on
bus (-28)
stm32_rifsc bus@42080000: Some child failed to bind (-28)
initcall_run_r(): initcall initr_dm() failed
ERROR ### Please RESET the board ###
Fixes: 29ab19c2be ("Subtree merge tag 'v6.18-dts' of dts repo [1] into dts/upstream")
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Add SCMI clocks. These clocks are used as parent clocks and are
referenced by their rcc's node position in clk-stm32mp13.c
Fixes: fdb1bffe28 ("clk: scmi: Postpone clock name resolution")
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
It can be useful in xPL to access symbols from binman, such as the
offset/position and size of a binman entry.
Place these binman symbols together at the end of the xPL binary for
ARMv8, similar to ARM and RISC-V.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <simon.glass@canonical.com>
As of v2026.01, no platforms contain any rel.dyn sections in their xPL
phase images. Their inclusion in linker scripts initially was an
oversight as part of taking the full U-Boot linker scripts and modifying
them down. Then in commit 8b0ebe054b ("arm: Update linker scripts to
ensure appended device tree is aligned") these sections were used to
force correct alignment for the device tree. This however, lead to a
different problem.
That problem is that when we do not have a separate BSS section in SPL
we instead would overlay the BSS with the rel.dyn section, in the common
linker script case. This in turn lead to creating an incorrectly sized
BSS "pad" file sometimes (depending on arbitrary changes within the rest
of the binary itself). This in turn lead to the dtb being in the wrong
location in the binary and not found at run time.
This commit fixes a few things:
- Remove the rel.dyn section from all ARM SPL linker scripts.
- In turn, this moves the dtb alignment statement in to another section.
- For ast2600 which uses CONFIG_POSITION_INDEPENDENT we need to keep the
symbols however.
Tested-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Fabio Estevam <festevam@gmail.com>
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This patch renames the board directory from board/freescale to
board/nxp because NXP now provides Board Support Packages (BSPs) and
tools for the former Freescale i.MX and other i.MX products.
All relevant references have been updated accordingly. This change does
not affect functionality.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Since the commit 1e24e84db4 ("tiny-printf: Handle formatting of %p
with an extra Kconfig"), SPL_USE_TINY_PRINTF_POINTER_SUPPORT has been
made mandatory in order to use %p which would earlier have defaulted to
a 'long' print.
Without this config symbol, k3_sysfw_dfu_download fails to set the
correct value for the DFU string with:
sprintf(dfu_str, "sysfw.itb ram 0x%p 0x%x", addr,
CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
The value we get "sysfw.itb ram 0x? 0x41c29d40" causes a boot failure.
Therefore this patch sets SPL_USE_TINY_PRINTF_POINTER_SUPPORT for all K3
devices since the size impact is less than 100 bytes.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
With commit 0535e46d55 ("scripts/dtc: Update to upstream version
v1.7.2-35-g52f07dcca47c") we now require the correct, 8 byte alignment
of a device tree in order to work with it ourselves. This has exposed a
number of issues. In the case of using arch/arm/cpu/u-boot-spl.lds for
an xPL phase and having the BSS be overlayed with the dynamic
relocations sections (here, .rel.dyn) we had missed adding the comment
about our asm memset requirements. Then, when adjusting ALIGN statements
we later missed this one. In turn, when we use objcopy to create our
binary image we end up in the situation where
where the BSS must start out 8 byte aligned as
well as end 8 byte aligned because for appended device tree the
requirement is that the whole BSS (which we add as padding to the
binary) must be 8 byte aligned. Otherwise we end up with the situation
where __bss_end (where we look for the device tree at run time) is
aligned but the size of the BSS we add
Fixes: 7828a1eeb2 ("arm: remove redundant section alignments")
Fixes: 52caad0d14 ("ARM: Align image end to 8 bytes to fit DT alignment")
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Marek Vasut <marek.vasut@mailbox.org>
Some boards feature an "odd" DRAM size, where the total RAM is 1.5GB or
3GB. Our existing DRAM size detection routines can only detect power-of-2
sized configuration, and on those boards the DRAM size is overestimated,
so this typically breaks the boot quite early.
There doesn't seem to be an easy explicit way to detect those odd-sized
chips, but we can test whether the later part of the memory behaves like
memory, by verifying that a written pattern can be read back.
Experiments show that there is no aliasing effect here, as all locations
in the unimplemented range always return some fixed pattern, and cannot
be changed.
Also so far all those boards use a factor of 3 of some lower power-of-2
number, or 3/4th of some higher number. The size detection routine
discovers the higher number, so we can check for some memory cells beyond
75% of the detected size to be legit.
Add a routine the inverts all bits at a given location in memory, and
reads that back to prove that the new value was stored.
Then test the memory cell at exactly 3/4th of the detected size, and cap
the size of the memory to 75% when this test fails. For good measure
also make sure that memory just below the assumed memory end really
works.
This enables boards which ship with such odd memory sizes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The 9FGV0441 PCIe clock generator can operate in autonomous mode, which
is the default mode. U-Boot currently does not have a driver for this
PCIe clock generator, but Linux 6.17 DT does describe the clock generator
in Sparrow Hawk board DT and this DT is included in U-Boot since commit
eea470fd7f ("Subtree merge tag 'v6.17-dts' of dts repo [1] into dts/upstream").
Reinstate basic PCIe clock description which matches the behavior of
Linux DT before Linux 6.17.y release in in U-Boot DT extras to allow
PCIe to be used on Sparrow Hawk board in U-Boot until the 9FGV0441
driver gets implemented or ported from Linux.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Greg Malysa <malysagreg@gmail.com> says:
This series adds the final pieces to enable mainline U-Boot to build and
boot all Analog Devices SC5xx SoCs and supports the associated carrier
board options. At this point it should be viable for new users for these
platforms to start with the latest version of U-Boot rather than our
vendor fork, however some features (such as OSPI support and falcon
boot) remain unavailable until we are able to unify our implementations
with the mainline implementations.
Link: https://lore.kernel.org/r/20251211080414.5363-1-malysagreg@gmail.com
[trini: Rebuild CI containers to have new tools]
Signed-off-by: Tom Rini <trini@konsulko.com>
This adds support for the Analog Devices SC598-SOM and configurations
for using it with both the SOMCRR-EZKIT and SOMCRR-EZLITE. This adds
dtsis for both Rev D (including older revisions) and Rev E SOMs, which
are not compatible due to BOM changes. Although no new Rev D SOMs are
produced as of 2025, many are in circulation, so the RevD dtsi is
included to facilitate use for existing customers.
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Signed-off-by: Philip Molloy <philip@philipmolloy.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Binman is optionally supported for Analog Devices sc5xx SoCs if Yocto is
not being used to create and assemble system images. The spl LDR is
generated locally but other artifacts such as kernel FIT image and root
file system are built externally and must be supplied to binman if used.
Binman is enabled by selecting the SC5XX_USE_BINMAN config symbol and
the image structure is included in the shared sc5xx device tree.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Support for the SOM-CRR variants introduces library level changes that
are not modelled in the device tree. As a result they cannot both be
selected at the same time, so this updates the dependency in Kconfig to
prevent them from being enabled together.
Reported-by: Philip Molloy <Philip.Molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
The symbol SC_BOOT_MODE was named incorrectly and inconsistently with
its usage. The selected boot mode is set only by hardware and cannot be
adjusted through software (apart from the use of FORCE_BMODE to instruct
the boot rom to ignore the hardware setting when loading uboot proper,
but this cannot change how SPL is loaded).
This symbol actually controlled the BCODE (easily confused with BMODE,
shorthand for boot mode), so this renames it to SC_BCODE and updates the
help text to reflect its actual usage: the BCODE is an SoC- and boot
mode-specific setting that affects how the boot rom configures QSPI or
OSPI in order to read an LDR file from the associated peripheral.
Reported-by: Philip Molloy <Philip.Molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Add Kconfig symbols to parameterize the SPI flash layout used in a
default-ish configuration. This adds more flexibility to the default ADI
environment, enabling customers with boards based on but not identical
to an ezkit to reuse more of the infrastructure. Furthermore it allows
for yocto (the expected default) or binman (to be introduced in this
series) to configure or use the flash layout based on a single
definition of all of the parameters when creating an image.
Signed-off-by: Greg Malysa <malysagreg@gmail.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
With commit 5663b137e6 ("arm: Remove edminiv2 board") the last
ARCH_ORION5X platform was removed. Remove the rest of the architecture
code which is now unused.
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini <trini@konsulko.com> says:
This series builds on top of what Beleswar Padhi did in [1]. While
there's still discussion about the mkimage related parts, the linker
portion appears to the reliable path forward. An alternative that I had
mentioned before, and was part of previous discussions on this topic[2]
is in the end I believe not reliable enough. While we can take an output
file and pad it to where we think it needs to be, ultimately the linker
needs to place the symbol where we want it and if that isn't where we
pad to, we have a different problem. So what this series does (but each
commit message elaborates on the arch-specific linker scripts being
inconsistent) is make sure the linker script will place the required
symbol at 8-byte alignment, and then also use an ASSERT to fail the
build if this would not be true due to some unforseen event.
[1]: https://lore.kernel.org/u-boot/20260112101102.1417970-1-b-padhi@ti.com/
[2]: https://source.denx.de/u-boot/u-boot/-/issues/30
Link: https://lore.kernel.org/r/20260115222828.3931345-1-trini@konsulko.com
With commit 0535e46d55 ("scripts/dtc: Update to upstream version
v1.7.2-35-g52f07dcca47c") it is now a fatal error to U-Boot if our
device tree is not 8-byte aligned. In commit 85f586035d ("ARM: OMAP2+:
Pad SPL binary to 8-byte alignment before DTB") Beleswar Padhi explains
that we must have ALIGN(x) statements inside of a section to ensure that
padding is included and not simply that the linker address counter is
incremented. To that end, this patch:
- Expands some linker sections to be more readable when adding a second
statement to the section.
- Aligns the final section before _end (for U-Boot) or
_image_binary_end or __bss_end (for xPL phases) by 8-bytes by adding
'. = ALIGN(8);' to the final section before the symbol.
- Ensure that we do have alignment by adding an ASSERT so that when not
aligned we fail to link (and explain why).
- Remove now-spurious '. = ALIGN(x);' statements that were intended to
provide the above alignments.
Tested-by: Michal Simek <michal.simek@amd.com> # Zynq
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[trini: Also update arch/arm/cpu/armv8/u-boot.lds as Ilas requested]
Signed-off-by: Tom Rini <trini@konsulko.com>
The OMAP2 SPL linker script (also used for K3 platforms) currently uses
a 4-byte alignment directive after the __u_boot_list section. This
alignment directive only advances the location counter without padding
the actual binary output.
When objcopy extracts u-boot-spl-nodtb.bin, it includes only actual
data, stopping at the last byte of __u_boot_list (e.g., 0x41c359fc),
not an aligned address (e.g., 0x41c35a00). So, when the FIT image
containing device trees is concatenated to the SPL binary, it gets
appended at this unaligned file size, causing libfdt validation failure.
To fix this, move the alignment directive into the __u_boot_list section
itself and make it 8-byte aligned as per DT spec. This forces the linker
to include padding as part of the section data, ensuring objcopy
includes the padding bytes in the binary and the appended FIT image
starts at an 8-byte aligned boundary.
Reported-by: Anshul Dalal <anshuld@ti.com>
Closes: https://lore.kernel.org/u-boot/DFJ950O0QM0D.380U0N16ZO19E@ti.com
Fixes: 0535e46d55 ("scripts/dtc: Update to upstream version v1.7.2-35-g52f07dcca47c")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
On my AN7581 board, the same change in the Airoha ATF-2.10 source code
causes instability in eMMC reading. After the patch, in about 9 of 10
cases, ATF BL2 is unable to read FIP image from the eMMC flash. Thus
BL31 and U-Boot are unable to start.
Lets revert commit 7cb79f8d3d ("arm: dts: an7581: set r_smpl for MMC
in U-Boot") until the issue will be investigated.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
On GDET enabled part, need to call voltage change start and finish
APIs when adjust the voltage more than 100mv. Otherwise GDET will be
triggered and system is reset
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
We have been getting a lot more patches from Qualcomm engineers, largely
focusing on IoT, router, and automotive platforms (those with QCS, IPQ,
and SA prefixes specifically).
Quite a variety of changes here:
- Watchdog overflow fix
- Hardcoded fastboot buffer addresses for a few board (hoppefully
temporary until fastboot is updated to read $fastboot_addr_r)
- Enable memory protection (MMU_MGPROT) for ARCH_SNAPDRAGON
- pinctrl support for the QCS615 soc
- various USB/phy fixes including phy config for msm8996/qcs615
- mmc and i2c clock configuration fixes
- significant fixes for rpmh and regulator drivers
- added config fragment for pixel devices
- sa8775p clock fixes
- support for "flattened" dwc3 DT that recently landed upstream for
sc7280 (qcs6490) and a few other platforms
Remove the empty include/configs/mt8365.h header file as it is not
needed. The Kconfig entry that referenced it is also removed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove empty gpio.h header file and CONFIG_GPIO_EXTRA_HEADER on
ARCH_MEDIATEK. There is no reason to have these since the header
doesn't contain anything.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
When booting from SPI, the ROM code does not initialize the MMC
controller on AN7581. As a result, the first MMC initialization
is performed by U-Boot.
In this case, the r_smpl bit is left uninitialized, which may
cause incorrect sampling timing during early MMC access.
Set the r_smpl bit explicitly in the U-Boot device tree to ensure
reliable MMC initialization.
This change is limited to the U-Boot-specific device tree.
The Linux MMC driver already performs runtime delay detection
and does not require a fixed r_smpl setting.
Signed-off-by: Ray Liu <ray.xy.liu@gmail.com>
Currently (since 2026.01-rc) on all SDM630/660 based devices this is
printed, after observing long boot delay (several seconds) before
executing preboot commands:
QCOM-FMP: Failed to find boot partition
find_target_partition() function incorrectly assumes that eMMC is always
at number 0. In general you can't rely on device numbering to determine if
particular block device is eMMC or SD-card, because it depends on how
aliases are defined in device tree "chosen" node. Some SoCs have MMC
numbers starting at 1, not 0; so mmc1 is eMMC, mmc2 is SD-card.
Make eMMC detection reliable by using IS_SD() macro from mmc.h header.
Using this method target boot partition can be found successfully.
With debug prints enabled, this is printed:
QCOM-FMP: skipped SD-Card (devnum 2)
QCOM-FMP: Capsule update target: boot (disk 1:60)
QCOM-FMP: DFU string: 'mmc 0=u-boot.bin part 1 60'
Without debug prints nothing is printed, no error about failure to find
boot partition.
Fixes: fe80a5f800 ("mach-snapdragon: CapsuleUpdate: support all boot methods")
Signed-off-by: Alexey Minnekhanov <alexeymin@minlexx.ru>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20251107232935.283843-1-alexeymin@minlexx.ru
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Tom Rini <trini@konsulko.com> says:
As seen by a number of patches fixing memory leaks, U-Boot has a problem
with developer expectations around devm_kmalloc and friends. Namely,
whereas in Linux these memory allocations will be freed automatically in
most cases, in U-Boot this is only true if DEVRES is enabled. Now,
intentionally, in xPL phases, we do not (and do not offer as an option)
enabling DEVRES. However in full U-Boot this is left either to the user,
or some drivers have select'd DEVRES on their own. This inconsistency is
a problem. This series goes and deals with two small issues that were
shown by having all drivers that use devm_.alloc to allocate memory also
select DEVRES and then we make DEVRES no longer be a prompted option and
instead select'd as needed. We do not make this unconditional as it
would result in growing the resulting binary on the many platforms which
have no users of the devm_.alloc family of functions.
Link: https://lore.kernel.org/r/20251227223833.3019311-1-trini@konsulko.com
The devm alloc functions that we have may follow the Linux kernel model
where allocations are (almost always) automatically free()'d. However,
quite often we don't enable, in full U-Boot, the tracking and free()'ing
functionality. This in turn leads to memory leaks because the driver
author expects that since the functions have the same name as in the
Linux Kernel they have the same behavior. In turn we then get
functionally correct commits such as commit 00e1fed93c ("firmware:
ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource") that manually
add these calls. Rather than manually tracking allocations and
implementing free()s, rework things so that we follow expectations by
enabling the DEVRES functionality (outside of xPL phases).
This turns DEVRES from a prompted symbol to a symbol that must be
select'd, and we now remove our non-managed alloc/free functions from
outside of xPL builds.
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This adds basic support for MediaTek MT8188 SoC.
Add watchdog support by adding upstream compatible string.
Add tphy support by adding "mediatek,generic-tphy-v2" compatible string
in arch/arm/dts/mt8188-u-boot.dtsi
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Our last sync with the kernel was 5.1.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>a #rebased on -next
Change mt8365_evk_defconfig to use CONFIG_OF_UPSTREAM=y and delete the
U-Boot copy of the devicetree source files for mt8365.
The upstream devicetree is identical to the U-Boot one being removed
(other than having more nodes for devices not used by U-Boot and
upstream fixed a compatible string in &scpsys, also not affecting
U-Boot).
There was one minor glitch with upstream missing a few topckgen macro
definitions, so those are added to the clock driver directly as a
workaround.
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
