There are two reasons why the USB stack needs to be
started before handing to bootflow or other boot
sequences:
1. When a USB hub is present on the board, we need to
do the required sequences to make it usable
2. To make USB storage devices 'visible' to bootflow
without further intervention
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This board has been migrated to the upstream / kernel
device tree version (OF_UPSTREAM), so remove the
old 'local' copies that are no longer required.
However, the -u-boot.dtsi append needs to remain,
because the SoC fsl-ls1088a-u-boot.dtsi is required
for some devices (like PCIe controllers and DPAA2 ethernet)
to properly enumerate under U-Boot.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Two recent additions to the mainline device tree allow us
to switch away from the local U-Boot copy:
* Board/embedded controller (traverse,ten64-controller)
is now in the mainline device tree.
* USB Hub (USB5744) connections were also added to
the mainline device tree but not in U-Boot.
The LS1088A and Ten64 device trees in U-Boot were actually
'synced' to mainline some time ago, so the content
(except for the changes mentioned above) is identical.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ten64 board revs A through C have a Microchip USB5744
hub on the board, which must be configured over I2C
at boot time to become usable.
This function has not been part of the mainline
U-Boot for this board until now, as a mainline driver
and device-tree binding is now available for the USB5744.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
We have added board_fix_fdt to remove elements from U-Boot's
internal FDT related to the USB hub, so CONFIG_OF_BOARD_FIXUP
needs to be enabled to utilize it.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
More recent revisions of the Ten64 board do not have a USB Hub
(USB5744). The references to the USB5744 need to be removed in U-Boot's
internal FDT to avoid the USB5744 setup being invoked on these boards.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The USB Hub (microchip,usb5744) can enter a dis-/reconnect loop
if a driver tries to re-initialise the hub over I2C.
On the Ten64 board, this process only needs to be run once
per system reset cycle, which is carried out by U-Boot.
As there are distributions shipping with the affected
driver by default, the best solution is to remove
the USB hub topology information from the FDT passed
to the operating system, so the OS won't attempt
to re-initialise the USB hub under any circumstance.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Both consumers and sub-arch specific versions of gpio.h
may reference stdint or other non-C90 type definitions.
Ensure the common ones are available by including linux/types.h
before any other headers.
This issue came to light when the usb onboard hub driver
was enabled for ten64_tfa_defconfig:
In file included from ./arch/arm/include/asm/gpio.h:2,
from common/usb_onboard_hub.c:10:
./arch/arm/include/asm/arch/gpio.h:17:9: error: unknown type name 'ulong'
17 | ulong addr;
./arch/arm/include/asm/arch/gpio.h:18:9: error: unknown type name 'ulong'
18 | ulong size;
./arch/arm/include/asm/arch/gpio.h:19:9: error: unknown type name 'uint'
19 | uint ngpios;
(In this instance, the cited errors actually originate from
arch/arm/include/asm/arch-fsl-layerscape/gpio.h, which is included
by the arm top level asm/gpio.h)
Implemented as per suggestion from Quentin Schulz in Link:
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Link: https://lore.kernel.org/u-boot/35038a9a-fa5a-4f9f-b34e-17cc80a7824c@cherry.de/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
When CONFIG_DM_SPI_FLASH is enabled, sf command will default find
device from DT which requires to use "jedec,spi-nor" compatible
string not obsoleted "spi-flash". So update NXP LS DTS to use
new compatible string
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
There are lots of DT warning in layerscape DTS files like:
node name for SPI buses should be 'spi' and SPI bus unit address
format error.
Update the spi node name and flash node name to avoid build warning
Signed-off-by: Ye Li <ye.li@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Enable USB nodes in -u-boot.dtsi. After sync dts with kernel, USB
nodes status are set to disabled. So "usb start" does not work on
ls1088ardb and ls1088aqds.
Fixes: 10ff7e6b04 ("arm: dts: fsl-ls1088a: sync usb controller nodes with Linux")
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Wei Lu <w.lu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Due to update of fsl-ls1088a.dtsi in previous patch, the esdhc
node is disabled, so u-boot can't to probe any eSDHC controller.
Fixes: fd4f7b0158 ("arm: dts: fsl-ls1088a: move and sync existing bindings to be under /soc")
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Wei Lu <w.lu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Disable ethernet controller dpmac nodes in fsl-ls1088a.dtsi. Board
dts is responsible to enable them. Otherwise will meet failure from
ldpaa_eth driver on LS1088AQDS board, because only few dpmac
controllers can be enabled on this board.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Wei Lu <w.lu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
LS1088AQDS u-boot contains multiple DTB files:
fsl-ls1088a-qds-21-x.dtb and fsl-ls1088a-qds-29-x.dtb.
It does not use default device tree fsl-ls1088a-qds.dtb
However, the nodes updated in fsl-ls1088a-qds-u-boot.dtsi are not
included for fsl-ls1088a-qds-21-x.dts and fsl-ls1088a-qds-29-x.dts,
so fail to get any output from serial.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Wei Lu <w.lu@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
In layerspace's lmb_arch_add_memory implementation, all memory bank
are added to lmb, even some is with zero size. This will cause lmb
treating it as overlap with available memory by lmb_addrs_overlap
and merge with available memory. Finally causing available memory
start address changed to 0.
For example, on LX2160, before zero memory bank added to lmb, there
are two available memory regions:
- region 0, start 0x80000000, size 0x7be00000
- region 1, start 0x2080000000, size 0x700000000
After zero size memory bank added, merge to one region:
- region 0, start 0, size 0x2780000000
This wrong new region causes efi_memory_init issue when allocating bounce
buffer because of conflict address (with uboot reserved) is allocated.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
The 'default ... if SYS_L3_SIZE_512KB' statement is written twice, making
the second instance dead code.
Based on the context, I believe the author of the code intended to set a
default value of '1048576' when SYS_L3_SIZE_1024KB is set.
This dead code was detected by kconfirm, a static analysis tool for
Kconfig.
Fixes: b85d75951f ("powerpc: Migrate SYS_L3_SIZE to Kconfig")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Yan WANG <yan.wang@softathome.com> says:
This series improves the reliability and efficiency of binman preload
header generation and test it against an encrypted FIT image signed with
a preload header.
When a preload header references other entries (e.g. an encrypted FIT)
through the collection etype, the referenced entries may be rebuilt
multiple times during binman processing. This becomes problematic when
the referenced entry produces non-deterministic output, such as FIT
encryption using random IVs or timestamps, since rebuilding the entry
changes the data.
This series ensures that referenced entries are built only once and that
preload signing is performed after all data is collected. It also avoids
unnecessary repacking or repeated signing operations by the preload.
The changes include:
* generate preload header placeholders in ObtainContents() and sign
data only once in ProcessContentsUpdate()
* mark referenced entries as build_done in the collection etype to
avoid rebuilding data
* add a functional test for signing an encrypted FIT with a preload
header
Link: https://lore.kernel.org/r/20260417083050.499955-1-yan.wang@softathome.com
Add a test to verify the preload header correctly signs an encrypted
FIT. This test exercises the case where encryption uses random IVs that
would change between mkimage calls.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The collection etype uses phandles in the 'content' property to
reference other entries. Mark each referenced entry with build_done
to avoid rebuilding the same entry data multiple times.
This is important for cases where rebuilding may change the data
content, e.g. due to timestamps or random IVs in encryption.
Refactor GetContentsByPhandle() to return both the entry object and
its data.
Signed-off-by: yan wang <yan.wang@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
To optimize preload generation, generate the header and signatures only
after all data has been collected in ProcessContentsUpdate(). This
avoids signing the data multiple times.
Since header_size is known upfront (from __init__), create a placeholder
in `ObtainContents()` to avoid an extra packing pass when
ProcessContentsUpdate() detects a size change.
This reduces unnecessary repacking and signing operations.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
CONFIG_SPL_MMC=n and CONFIG_SPL_DM_SPI=n are each listed twice in the
defconfig. Remove the redundant occurrences so each option appears only
once.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
CONFIG_SPL_MMC=n is listed twice in the defconfig. Remove the redundant
occurrence so each option appears only once.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
CONFIG_SCMI_FIRMWARE=y is listed twice in the defconfig. Remove the
redundant occurrence so each option appears only once.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
The R-Car Gen5 SoCs contains Cortex-M33, Cortex-R52 and Cortex-A720AE
cores. Add U-Boot build options for the Cortex-M33 core.
Since the Cortex-M33 core is a 32bit core, select V8M and ARM64 for
RCAR64 accordingly. Select TMU timer on the 32bit core, where it is
used instead of the ARMv8 timer. Adjust TMU timer base address to match
the address map of the Cortex-M33 core. Disable unused OF_BOARD_SETUP
as well as unavailable POSITION_INDEPENDENT configuration options.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Add support of Renesas R-Car Gen5 window watchdog timer. Timeout
configuration is derived from CONFIG_WATCHDOG_TIMEOUT_MSECS, which
is more accurate than the 1-second granularity 'timeout' passed to
.start callback.
Reviewed-by: Stefan Roese <stefan.roese@mailbox.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add R-Car Gen5 RSIP controller remoteproc driver capable of starting
the SCP, Cortex-R52 and Cortex-A720 cores in Renesas R-Car R8A78000
X5H SoC. The SCP core is started by releasing the core from reset,
the Cortex-R52 and Cortex-A720 are started using the SCP SCMI call.
The entry point for SCP core is fixed to its STCM, entry points for
Cortex-R52 and Cortex-A720 are set during rproc load.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Both R-Car V3M Eagle and V3MSK U-Boot DT extras contain AVB pinmux
assignment, which is a leftover from before the same pinmux was part
of upstream DTs. Remove the duplicate AVB pinmux assignment in favor
of the upstream DT content. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove duplicate properties which are present both in arch/arm/dts/
and upstream dts/upstream/src/arm64/renesas/ in favor of those in
upstream DTs. Since those are duplicates, this causes no functional
change. Remove unused num-cs and bank-width DT properties.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
If fat_sect_size = 0 and nr_sect = 0, the value of ret is never initialized.
A random return value is returned.
Initialize ret to 0.
Addresses-Coverity-ID: - 645495 Uninitialized scalar variable
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
There is a value of 256K hardcoded as u-boot image size. This
produce bank tty as soon as the image size grows over the limit.
Fix it by using value preset by CONFIG_SYS_MONITOR_LEN.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Some NXP imx hardware ip module as the esdhc controller are exactly the
same in some new ColdFire cpus. For the specific case, mcf5441x needs to
use the existing fsl_esdhc_imx.c driver for the esdhc device.
Create a stub to be able to use NXP "imx" serie drivers as the
fsl_esdhc_imx in the ColdFire architecture.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Allow cpu families as mcf5441x (m68k) to use the fsl_esdhc_imx driver
since the hardware ip module is the same.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
---
Changes in v2:
- moved before menuconfig changes
