* Fix parameter passing to standalone images with bootm command

* Patch by Kyle Harris, 30 Oct 2003: Fix build errors for ixdp425 board * Patch by David M. Horn, 29 Oct 2003: Fixes to build under CYGWIN * Get IceCube MGT5100 working (again)
* Prepare for release
2026-06-13 15:03:58 +03:00 · 2003-10-30 21:49:38 +00:00 · 2003-10-29 23:18:55 +00:00 · 2003-10-28 09:14:21 +00:00 · 2003-10-26 22:52:58 +00:00 · 2003-10-24 13:14:45 +00:00
450 changed files with 54253 additions and 11517 deletions
--- a/322
+++ b/322
@@ -1,7 +1,321 @@
 ======================================================================
-Changes for U-Boot 0.4.7:
+Changes for U-Boot 1.0.0:
 ======================================================================

+* Fix parameter passing to standalone images with bootm command
+
+* Patch by Kyle Harris, 30 Oct 2003:
+  Fix build errors for ixdp425 board
+
+* Patch by David M. Horn, 29 Oct 2003:
+  Fixes to build under CYGWIN
+
+* Get IceCube MGT5100 working (again)
+
+* Fix problems in memory test on some boards (which was not
+  non-destructive as intended)
+
+* Patch by Gary Jennejohn, 28 Oct 2003:
+  Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
+  to prevent stack overflow on ARM systems
+
+* Patch by Stephan Linz, 28 Oct 2003:
+  fix init sequence error for NIOS port
+
+* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
+
+* Add CONFIG_VERSION_VARIABLE to TRAB configuration
+
+* Patch by Xiao Xianghua, 23 Oct 2003:
+  small patch for mpc85xx
+
+* Fix small problem in MPC5200 I2C driver
+
+* Fix FCC3 support on ATC board
+
+* Correct header printing for multi-image files in do_bootm()
+
+* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
+
+* Fix PCI problems on PPChameleon board
+
+* Patch by Steven Scholz, 18 Oct 2003:
+  Fix AT91RM9200 ethernet driver
+
+* Patch by Nye Liu, 17 Oct 2003:
+  Fix typo in include/mpc8xx.h
+
+* Patch by Richard Woodruff, 16 Oct 03:
+  Fixes for cpu/arm925/interrupt.c
+  - Initialize timestamp & lastdec vars.
+  - fix timestamp overflows.
+  - fix lastdec overflow.
+  - smarter normalization to allow udelay() below 1ms to work.
+
+* Patch by Scott McNutt, 16 Oct
+  add networking support for the Altera Nios Development Kit,
+  Cyclone Edition (DK-1C20)
+
+* Patch by Jon Diekema, 14 Oct 2003:
+  add hint about doc/README.silent to README file
+
+* Add CompactFlash support for NSCU
+
+* Fix PCI problems on PPChameleonEVB
+
+* TRAB auto-update: Base decision if we have to strip the image
+  header on image type as encoded in the header
+  (include image type patch by Martin Krause, 17 Oct 2003)
+
+* Patches by Xianghua Xiao, 15 Oct 2003:
+
+  - Added Motorola CPU 8540/8560 support (cpu/85xx)
+  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
+  - Added Motorola MPC8560ADS board support (board/mpc8560ads)
+
+* Fix flash timings on TRAB board
+
+* Make sure HUSH is initialized for running auto-update scripts
+
+* Make 5200 reset command _really_ reset the board, without running
+  any other code after it
+
+* Fix errors with flash erase when range spans  across banks
+  that are mapped in reverse order
+
+* Fix flash mapping and display on P3G4 board
+
+* Patch by Kyle Harris, 15 Jul 2003:
+  - add support for Intel IXP425 CPU
+  - add support for IXDP425 eval board
+
+* Added config option CONFIG_SILENT_CONSOLE.  See doc/README.silent
+  for more information
+
+* Patch by Steven Scholz, 10 Oct 2003
+  - Add support for Altera FPGA ACEX1K
+
+* Patches by Thomas Lange, 09 Oct 2003:
+  - fix cmd_ide.c for non ppc boards (read/write functions did not
+    add ATA base address)
+  - fix for shannon board
+  - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
+  - Endian swap ATA identity for all big endian CPUs, not just PPC
+  - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
+    args to linux
+  - add support for dbau1x00 board (MIPS32)
+
+* Patch by Sangmoon Kim, 07 Oct 2003:
+  add support for debris board
+
+* Patch by Martin Krause, 09 Oct 2003:
+  Fixes for TRAB board
+  - /board/trab/rs485.c: correct baudrate
+  - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
+    udelay(); fix some timing problems with adc controller
+  - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
+    modify commands: touch and buzzer
+
+* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
+  (quick & dirty workaround for rogue pointer problem in get_vfatname());
+  Use direct function calls for auto_update instead of hush commands
+
+* Patch by Scott McNutt, 04 Oct 2003:
+  - add support for Altera Nios-32 CPU
+  - add support for Nios Cyclone Development Kit (DK-1C20)
+
+* Patch by Steven Scholz, 29 Sep 2003:
+  - A second parameter for bootm overwrites the load address for
+    "Standalone Application" images.
+  - bootm sets environment variable "filesize" to the resulting
+    (uncompressed) data length for "Standalone Application" images
+    when autostart is set to "no". Now you can do something like
+	if bootm $fpgadata $some_free_ram ; then
+		fpga load 0 $some_free_ram $filesize
+	fi
+
+* Patch by Denis Peter, 25 Sept 2003:
+  add support for the MIP405 Rev. C board
+
+* Patch by Yuli Barcohen, 25 Sep 2003:
+  add support for Zephyr Engineering ZPC.1900 board
+
+* Patch by Anders Larsen, 23 Sep 2003:
+  add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
+  implemented for the x86 architecture)
+
+* Patch by Sangmoon Kim, 23 Sep 2003:
+  fix pll_pci_to_mem_multiplier table for MPC8245
+
+* Patch by Anders Larsen, 22 Sep 2003:
+  enable timed autoboot on PXA
+
+* Patch by David Müller, 22 Sep 2003:
+  - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
+    returns correct libgcc file path
+  - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
+    time on s3c24x0 systems
+
+* Patch by Jon Diekema, 19 Sep 2003:
+  - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
+    link state to the fault LED.
+  - In NetLoop, make the Fault LED reflect the link status.  The link
+    status gets updated on entry, and on timeouts.
+
+* Patch by Anders Larsen, 18 Sep 2003:
+  allow mkimage to build and run on Cygwin-hosted systems
+
+* Patch by Frank Müller, 18 Sep 2003:
+  use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
+  cpu/mpc8xx/fec.c
+
+* Patch by Pantelis Antoniou, 16 Sep 2003:
+  add tool to compute fileds in the PLPRCR register for MPC86x
+
+* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
+
+* Fix build problems under FreeBSD
+
+* Add generic filesystem image type
+
+* Make fatload set filesize environment variable
+
+* enable basic / medium / high-end configurations for PPChameleonEVB
+  board; fix NAND code
+
+* enable TFTP client code to specify to the server the desired
+  timeout value (see RFC-2349)
+
+* Improve SDRAM setup for TRAB board
+
+* Suppress all output with splashscreen configured only if "splashimage"
+  is set
+
+* Fix problems with I2C support for mpc5200
+
+* Adapt TRAB configuration and auto_update to new memory layout
+
+* Add configuration for wtk board
+
+* Add support for the Sharp LQ065T9DR51U LCD display
+
+* Patch by Rune Torgersen, 17 Sep 2003:
+  - Fixes for MPC8266 default config
+  - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
+
+* Patches by Jon Diekema, 17 Sep 2003:
+  - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
+    env_common.c)
+  - sbc8260 tweaks
+  - adjust "help" output
+
+* Patches by Anders Larsen, 17 Sep 2003:
+  - fix spelling errors
+  - set GD_FLG_DEVINIT flag only after device function pointers
+    are valid
+  - Allow CFG_ALT_MEMTEST on systems where address zero isn't
+    writeable
+  - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
+  - trigger watchdog while waiting in serial driver
+
+* Add auto-update code for TRAB board using USB memory sticks,
+  support new configuration with more memory
+
+* disable MPC5200 bus pipelining as workaround for bus contention
+
+* Modify XLB arbiter priorities on MPC5200 so all devices use same
+  priority; configure critical interrupts to be handled like external
+  interrupts
+
+* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
+  go back to 66 MHz for stability
+
+* Patches by Jon Diekema, 15 Sep 2003:
+  - add description for missing CFG_CMD_* entries in the README file
+  - sacsng tweaks
+
+* Patch by Gleb Natapov, 14 Sep 2003:
+  enable watchdog support for all MPC824x boards that have a watchdog
+
+* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
+  "Non-octet Aligned Frame" errors we see at 100 Mbps
+
+* Patch by Sharad Gupta, 14 Sep 2003:
+  fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
+
+* Patch by llandre, 11 Sep 2003:
+  update configuration for PPChameleonEVB board
+
+* Patch by David Müller, 13 Sep 2003:
+  various changes to VCMA9 board specific files
+
+* Add I2C support for MGT5100 / MPC5200
+
+* Patch by Rune Torgersen, 11 Sep 2003:
+  Changed default memory option on MPC8266ADS to NOT be Page Based
+  Interleave, since this doesn't work very well with the standard
+  16MB DIMM
+
+* Patch by George G. Davis, 12 Sep 2003:
+  fix Makefile settings for sk98 driver
+
+* Patch by Stefan Roese, 12 Sep 2003:
+  - new boards added: DP405, HUB405, PLU405, VOH405
+  - some esd boards updated
+  - cpu/ppc4xx/sdram.c: disable memory controller before setting
+    first values
+  - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
+
+* Patch by Martin Krause, 11 Sep 2003:
+  add burn-in tests for TRAB board
+
+* Enable instruction cache on MPC5200 board
+
+* Patch by Denis Peter, 11 Sep 2003:
+  - fix USB data pointer assignment for bulk only transfer.
+  - prevent to display erased directories in FAT filesystem.
+
+* Change output format for NAND flash - make it look like for other
+  memory, too
+
+======================================================================
+Changes for U-Boot 0.4.8:
+======================================================================
+
+* Add I2C and RTC support for RMU board
+
+* Patches by Denis Peter, 9 Sep 2003:
+  add FAT support for IDE, SCSI and USB
+
+* Patches by Gleb Natapov, 2 Sep 2003:
+  - cleanup of POST code for unsupported architectures
+  - MPC824x locks way0 of data cache for use as initial RAM;
+    this patch unlocks it after relocation to RAM and invalidates
+    the locked entries.
+
+* Patch by Gleb Natapov, 30 Aug 2003:
+  new I2C driver for mpc107 bridge. Now works from flash.
+
+* Patch by Dave Ellis, 11 Aug 2003:
+  - JFFS2: fix typo in common/cmd_jffs2.c
+  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
+  - JFFS2: remove node version 0 warning
+  - JFFS2: accept JFFS2 PADDING nodes
+  - SXNI855T: add AM29LV800 support
+  - SXNI855T: move environment from EEPROM to flash
+  - SXNI855T: boot from JFFS2 in NOR or NAND flash
+
+* Patch by Bill Hargen, 11 Aug 2003:
+  fixes for I2C on MPC8240
+  - fix i2c_write routine
+  - fix iprobe command
+  - eliminates use of global variables, plus dead code, cleanup.
+
+* Add support for USB Mass Storage Devices (BBB)
+  (tested with USB memory sticks only)
+
+* Avoid flicker on TRAB's VFD
+
 * Add support for SK98xx driver

 * Add PCI support for SL8245 board
@@ -27,6 +341,10 @@ Changes for U-Boot 0.4.7:
 * Patch by Yuli Barcohen, 7 Aug 2003:
  check BCSR to detect if the board is configured in PCI mode

+======================================================================
+Changes for U-Boot 0.4.7:
+======================================================================
+
 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
  add support for Adder II MPC852T module

@@ -263,7 +581,7 @@ Changes for U-Boot 0.4.1:
  - PIC on LWMON board needs delay after power-on
  - Add missing RSR definitions for MPC8xx
  - Improve log buffer handling: guarantee clean reset after power-on
-  - Add support for EXBITGEN board
+  - Add support for EXBITGEN board (aka "genie")
  - Add support for SL8245 board

 * Code cleanup:
--- a/33
+++ b/33
@@ -18,14 +18,14 @@ N: Dr. Bruno Achauer
 E: bruno@exet-ag.de
 D: Support for NetBSD (both as host and target system)

-N: Swen Anderson
-E: sand@peppercon.de
-D: ERIC Support
-
 N: Guillaume Alexandre
 E: guillaume.alexandre@gespac.ch
 D: Add PCIPPC6 configuration

+N: Swen Anderson
+E: sand@peppercon.de
+D: ERIC Support
+
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA board support, ARTOS support.
@@ -75,7 +75,7 @@ E: clark@esteem.com
 D: ESTEEM192E support

 N: Magnus Damm
-E: eramdam@kieray1.p.y.ki.era.ericsson.se
+E: damm@opensource.se
 D: 8xxrom

 N: Arun Dharankar
@@ -182,13 +182,22 @@ N: Brad Kemp
 E: Brad.Kemp@seranoa.com
 D: Port to Windriver ppmc8260 board

+N: Sangmoon Kim
+E: dogoil@etinsys.com
+D: Support for debris board
+
 N: Thomas Koeller
 E: tkoeller@gmx.net
 D: Port to Motorola Sandpoint 3 (MPC8240)

+N: Raghu Krishnaprasad
+E: Raghu.Krishnaprasad@fci.com
+D: Support for Adder-II MPC852T evaluation board
+W: http://www.forcecomputers.com
+
 N: Thomas Lange
-E: thomas@corelatus.com
-D: Support for GTH board; lots of PCMCIA fixes
+E: thomas@corelatus.se
+D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes

 N: The LEOX team
 E: team@leox.org
@@ -219,6 +228,10 @@ N: David M
 E: d.mueller@elsoft.ch
 D: Support for Samsung ARM920T SMDK2410 eval board

+N: Scott McNutt
+E: smcnutt@psyent.com
+D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20)
+
 N: Rolf Offermanns
 E: rof@sysgo.de
 D: Initial support for SSV-DNP1110, SMC91111 driver
@@ -299,6 +312,6 @@ E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com

-N: Pantelis Antoniou
-E: panto@intracom.gr
-D: NETVIA board support, ARTOS support.
+N: Xianghua Xiao
+E: x.xiao@motorola.com
+D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
--- a/39
+++ b/39
@@ -25,6 +25,10 @@ Pantelis Antoniou <panto@intracom.gr>

 	NETVIA			MPC8xx

+Yuli Barcohen <yuli@arabellasw.com>
+
+	ZPC1900			MPC8265
+
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>

 	sacsng			MPC8260
@@ -89,6 +93,7 @@ Wolfgang Denk <wd@denx.de>
 	TQM8255			MPC8255

 	CPU86			MPC8260
+	PM825			MPC8250
 	PM826			MPC8260
 	TQM8260			MPC8260

@@ -145,11 +150,19 @@ Brad Kemp <Brad.Kemp@seranoa.com>

 	ppmc8260		MPC8260

+Sangmoon Kim <dogoil@etinsys.com>
+
+	debris			MPC8245
+
+Raghu Krishnaprasad <raghu.krishnaprasad@fci.com>
+
+	ADDERII			MPC852T
+
 Nye Liu <nyet@zumanetworks.com>

 	ZUMA			MPC7xx_74xx

-Thomas Lange <thomas@corelatus.com>
+Thomas Lange <thomas@corelatus.se>

 	GTH			MPC860

@@ -195,11 +208,15 @@ Stefan Roese <stefan.roese@esd-electronics.com>
 	CPCI440			PPC440GP
 	CPCIISER4		PPC405GP
 	DASA_SIM		IOP480 (PPC401)
+	DP405			PPC405EP
 	DU405			PPC405GP
+	HUB405			PPC405EP
 	OCRTC			PPC405GP
 	ORSG			PPC405GP
 	PCI405			PPC405GP
+	PLU405			PPC405EP
 	PMC405			PPC405GP
+	VOH405			PPC405EP

 Peter De Schrijver <p2@mind.be>

@@ -223,6 +240,11 @@ John Zhan <zhanz@sinovee.com>

 	svm_sc8xx		MPC8xx

+Xianghua Xiao <x.xiao@motorola.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+
 -------------------------------------------------------------------------

 Unknown / orphaned boards:
@@ -272,6 +294,7 @@ Kyle Harris <kharris@nexus-tech.net>

 	lubbock			xscale
 	cradle			xscale
+	ixdp425			xscale

 Gary Jennejohn <gj@denx.de>

@@ -324,6 +347,20 @@ Wolfgang Denk <wd@denx.de>
 	incaip			MIPS32 4Kc
 	purple			MIPS64 5Kc

+Thomas Lange <thomas@corelatus.se>
+	dbau1x00		MIPS32 Au1000
+
+#########################################################################
+# Nios-32 Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Scott McNutt <smcnutt@psyent.com>
+
+	DK1C20			Nios-32
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################
--- a/40
+++ b/40
@@ -56,10 +56,11 @@ LIST_4xx="	\
 	ADCIOP		AR405		ASH405          BUBINGA405EP    \
 	CANBT		CPCI405		CPCI4052 	CPCI405AB       \
 	CPCI440         CPCIISER4	CRAYL1  	DASA_SIM	\
-	DU405    	EBONY           ERIC  		EXBITGEN	\
-	MIP405  	MIP405T		ML2		OCRTC		\
-	ORSG		PCI405		PIP405		PMC405          \
-	PPChameleonEVB	W7OLMC		W7OLMG          WALNUT405	\
+	DP405           DU405    	EBONY           ERIC  		\
+	EXBITGEN	HUB405          MIP405  	MIP405T		\
+	ML2		OCRTC		ORSG		PCI405		\
+	PIP405		PLU405          PMC405          PPChameleonEVB	\
+	VOH405          W7OLMC		W7OLMG          WALNUT405	\
 "

 #########################################################################
@@ -68,8 +69,9 @@ LIST_4xx="	\

 LIST_824x="	\
 	A3000           BMW		CPC45		CU824		\
-	MOUSSE          MUSENKI    	OXC		PN62		\
-	Sandpoint8240   Sandpoint8245	SL8245		utx8245		\
+	debris		MOUSSE          MUSENKI    	OXC		\
+	PN62		Sandpoint8240   Sandpoint8245	SL8245		\
+	utx8245								\
 "

 #########################################################################
@@ -81,7 +83,15 @@ LIST_8260="	\
 	gw8260		hymod		IPHASE4539	MPC8260ADS	\
 	MPC8266ADS	PM826		ppmc8260	RPXsuper	\
 	rsdproto	sacsng		sbc8260		SCM		\
-	TQM8260_AC	TQM8260_AD	TQM8260_AE			\
+	TQM8260_AC	TQM8260_AD	TQM8260_AE	ZPC1900		\
+"
+
+#########################################################################
+## MPC85xx Systems (includes 8540, 8560 etc.)
+#########################################################################
+
+LIST_85xx="	\
+	MPC8540ADS	MPC8560ADS					\
 "

 #########################################################################
@@ -100,6 +110,7 @@ LIST_7xx="	\
 LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
 	  ${LIST_8xx}  \
 	  ${LIST_824x} ${LIST_8260} \
+	  ${LIST_85xx}	\
 	  ${LIST_4xx}		    \
 	  ${LIST_74xx} ${LIST_7xx}"

@@ -131,18 +142,22 @@ LIST_ARM9="	\

 LIST_pxa="cradle csb226 innokom lubbock wepep250"

+LIST_ixp="ixdp425"

-LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa}"
+
+LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa} ${LIST_ixp}"

 #########################################################################
-## MIPS 4Kc Systems
+## MIPS Systems
 #########################################################################

 LIST_mips4kc="incaip"

 LIST_mips5kc="purple"

-LIST_mips="${LIST_mips4kc} ${LIST_mips5kc}"
+LIST_au1x00="dbau1x00"
+
+LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1x00}"

 #########################################################################
 ## i386 Systems
@@ -174,7 +189,10 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	5xx|5xxx|8xx|824x|8260|4xx|7xx|74xx|SA|ARM7|ARM9|ppc|arm|pxa|mips|I486|x86)
+	ppc|5xx|5xxx|8xx|824x|8260|85xx|4xx|7xx|74xx| \
+	arm|SA|ARM7|ARM9|pxa|ixp| \
+	mips| \
+	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do
 				build_target ${target}
--- a/133
+++ b/133
@@ -69,6 +69,9 @@ endif
 ifeq ($(ARCH),mips)
 CROSS_COMPILE = mips_4KC-
 endif
+ifeq ($(ARCH),nios)
+CROSS_COMPILE = nios-elf-
+endif
 endif
 endif

@@ -76,6 +79,7 @@ export	CROSS_COMPILE

 # The "tools" are needed early, so put this first
 SUBDIRS	= tools \
+	  examples \
 	  lib_generic \
 	  lib_$(ARCH) \
 	  cpu/$(CPU) \
@@ -89,8 +93,7 @@ SUBDIRS	= tools \
 	  drivers \
 	  drivers/sk98lin \
 	  post \
-	  post/cpu \
-	  examples
+	  post/cpu

 #########################################################################
 # U-Boot objects....order is important (i.e. start must be first)
@@ -103,6 +106,9 @@ endif
 ifeq ($(CPU),ppc4xx)
 OBJS +=	cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc85xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif

 LIBS  =	board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
@@ -117,6 +123,8 @@ LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/cpu/libcpu.a
 LIBS += common/libcommon.a
 LIBS += lib_generic/libgeneric.a
+# Add GCC lib
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc

 #########################################################################
 #########################################################################
@@ -195,14 +203,16 @@ cmi_mpc5xx_config:	unconfig
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
+MPC5200LITE		\
+icecube_5200_config	\
 IceCube_5200_config	\
 IceCube_5100_config:		unconfig
 	@ >include/config.h
-	@[ -z "$(findstring _5200,$@)" ] || \
+	@[ -z "$(findstring 5200,$@)" ] || \
 		{ echo "#define CONFIG_MPC5200"		>>include/config.h ; \
 		  echo "... with MPC5200 processor" ; \
 		}
-	@[ -z "$(findstring _5100,$@)" ] || \
+	@[ -z "$(findstring 5100,$@)" ] || \
 		{ echo "#define CONFIG_MGT5100"		>>include/config.h ; \
 		  echo "... with MGT5100 processor" ; \
 		}
@@ -468,9 +478,15 @@ v37_config:	unconfig
 	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
 	@./mkconfig $(@:_config=) ppc mpc8xx v37

+wtk_config:	unconfig
+	@echo "#define CONFIG_LCD" >include/config.h
+	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h
+	@./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+
 #########################################################################
 ## PPC4xx Systems
 #########################################################################
+xtract_4xx = $(subst _MODEL_BA,,$(subst _MODEL_ME,,$(subst _MODEL_HI,,$(subst _config,,$1))))

 ADCIOP_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
@@ -505,6 +521,9 @@ CRAYL1_config:unconfig
 DASA_SIM_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd

+DP405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx dp405 esd
+
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd

@@ -517,6 +536,9 @@ ERIC_config:unconfig
 EXBITGEN_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx exbitgen

+HUB405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
+
 MIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl

@@ -538,11 +560,33 @@ PCI405_config:	unconfig
 PIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl

+PLU405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx plu405 esd
+
 PMC405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd

+PPChameleonEVB_MODEL_BA_config	\
+PPChameleonEVB_MODEL_ME_config	\
+PPChameleonEVB_MODEL_HI_config	\
 PPChameleonEVB_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx PPChameleonEVB dave
+	@ >include/config.h
+	@[ -z "$(findstring _MODEL_BA,$@)" ] || \
+		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
+		  echo "... BASIC model" ; \
+		}
+	@[ -z "$(findstring _MODEL_ME,$@)" ] || \
+		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
+		  echo "... MEDIUM model" ; \
+		}
+	@[ -z "$(findstring _MODEL_HI,$@)" ] || \
+		{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
+		  echo "... HIGH-END model" ; \
+		}
+	@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+
+VOH405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd

 W7OLMC_config	\
 W7OLMG_config: unconfig
@@ -606,6 +650,9 @@ utx8245_config: unconfig
 ## MPC8260 Systems
 #########################################################################

+atc_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 atc
+
 cogent_mpc8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 cogent

@@ -729,8 +776,18 @@ TQM8265_AA_config:  unconfig
 	fi
 	@./mkconfig -a TQM8260 ppc mpc8260 tqm8260

-atc_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8260 atc
+ZPC1900_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
+
+#########################################################################
+## MPC85xx Systems
+#########################################################################
+
+MPC8540ADS_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
+
+MPC8560ADS_config:      unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads

 #########################################################################
 ## 74xx/7xx Systems
@@ -739,24 +796,27 @@ atc_config:	unconfig
 AmigaOneG3SE_config:	unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI

+BAB7xx_config: unconfig
+	@./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+
+debris_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x debris etin
+
+ELPPC_config: unconfig
+	@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+
 EVB64260_config	\
 EVB64260_750CX_config:	unconfig
 	@./mkconfig EVB64260 ppc 74xx_7xx evb64260

-ZUMA_config:	unconfig
+P3G4_config: unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260

 PCIPPC2_config \
 PCIPPC6_config: unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2

-BAB7xx_config: unconfig
-	@./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
-
-ELPPC_config: unconfig
-	@./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
-
-P3G4_config: unconfig
+ZUMA_config:	unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260

 #========================================================================
@@ -782,7 +842,7 @@ shannon_config	:	unconfig
 ## ARM92xT Systems
 #########################################################################

-xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
+xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))

 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn
@@ -797,11 +857,23 @@ smdk2410_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2410

 trab_config \
-trab_big_flash_config:	unconfig
+trab_bigram_config \
+trab_bigflash_config \
+trab_old_config:	unconfig
 	@ >include/config.h
-	@[ -z "$(findstring _big_flash,$@)" ] || \
-		{ echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \
-		  echo "... with big flash support" ; \
+	@[ -z "$(findstring _bigram,$@)" ] || \
+		{ echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
+		  echo "... with 8 MB Flash, 32 MB RAM" ; \
+		}
+	@[ -z "$(findstring _bigflash,$@)" ] || \
+		{ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+		  echo "... with 16 MB Flash, 16 MB RAM" ; \
+		  echo "TEXT_BASE = 0x0CF00000" >board/trab/config.tmp ; \
+		}
+	@[ -z "$(findstring _old,$@)" ] || \
+		{ echo "#define CONFIG_OLD_VERSION" >>include/config.h ; \
+		  echo "... with small memory configuration" ; \
+		  echo "TEXT_BASE = 0x0CF00000" >board/trab/config.tmp ; \
 		}
 	@./mkconfig -a $(call xtract_trab,$@) arm arm920t trab

@@ -831,6 +903,9 @@ csb226_config	:	unconfig
 innokom_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa innokom

+ixdp425_config	:	unconfig
+	@./mkconfig $(@:_config=) arm ixp ixdp425
+
 lubbock_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa lubbock

@@ -890,6 +965,23 @@ incaip_config: unconfig
 purple_config :		unconfig
 	@./mkconfig $(@:_config=) mips mips purple

+#========================================================================
+# Nios
+#========================================================================
+#########################################################################
+## Nios32
+#########################################################################
+
+DK1C20_config:	unconfig
+	@./mkconfig $(@:_config=) nios nios dk1c20
+
+
+#########################################################################
+## MIPS32 AU1000
+#########################################################################
+dbau1x00_config		: 	unconfig
+	@./mkconfig $(@:_config=) mips mips dbau1x00
+
 #########################################################################
 #########################################################################

@@ -907,6 +999,7 @@ clean:
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
+	rm -f board/trab/trab_fkt board/trab/config.tmp

 clobber:	clean
 	find . -type f \
--- a/95
+++ b/95
@@ -146,6 +146,7 @@ Directory Hierarchy:
 - cpu/mpc8xx	Files specific to Motorola MPC8xx  CPUs
 - cpu/mpc824x	Files specific to Motorola MPC824x CPUs
 - cpu/mpc8260	Files specific to Motorola MPC8260 CPU
+- cpu/mpc85xx	Files specific to Motorola MPC85xx CPUs
 - cpu/ppc4xx	Files specific to IBM	   4xx	   CPUs


@@ -199,17 +200,22 @@ Directory Hierarchy:
 - board/mbx8xx	Files specific to MBX	     boards
 - board/mpc8260ads
 		Files specific to MPC8260ADS and PQ2FADS-ZU boards
+- board/mpc8540ads
+		Files specific to MPC8540ADS boards
+- board/mpc8560ads
+		Files specific to MPC8560ADS boards
 - board/mpl/	Files specific to boards manufactured by MPL
 - board/mpl/common	Common files for MPL boards
 - board/mpl/pip405	Files specific to PIP405     boards
 - board/mpl/mip405	Files specific to MIP405     boards
+- board/mpl/vcma9	Files specific to VCMA9      boards
 - board/musenki	Files specific to MUSEKNI    boards
 - board/mvs1	Files specific to MVS1       boards
 - board/nx823   Files specific to NX823      boards
 - board/oxc	Files specific to OXC        boards
 - board/omap1510inn
 		Files specific to OMAP 1510 Innovator boards
- board/omap1610inn  
+- board/omap1610inn
 		Files specific to OMAP 1610 Innovator boards
 - board/pcippc2	Files specific to PCIPPC2/PCIPPC6 boards
 - board/pm826	Files specific to PM826      boards
@@ -238,6 +244,7 @@ Directory Hierarchy:
 - board/westel/	Files specific to boards manufactured by Westel Wireless
 - board/westel/amx860	Files specific to AMX860     boards
 - board/utx8245	Files specific to UTX8245   boards
+- board/zpc1900	Files specific to Zephyr Engineering ZPC.1900 board

 Software Configuration:
 =======================
@@ -304,6 +311,7 @@ The following options need to be configured:
 		CONFIG_MPC823,	CONFIG_MPC850,	CONFIG_MPC855,	CONFIG_MPC860
 	or	CONFIG_MPC5xx
 	or	CONFIG_MPC824X, CONFIG_MPC8260
+	or	CONFIG_MPC85xx
 	or	CONFIG_IOP480
 	or	CONFIG_405GP
 	or	CONFIG_405EP
@@ -354,7 +362,8 @@ The following options need to be configured:
 		CONFIG_IAD210,     CONFIG_RPXlite,    CONFIG_sbc8260,
 		CONFIG_EBONY,      CONFIG_sacsng,     CONFIG_FPS860L,
 		CONFIG_V37,        CONFIG_ELPT860,    CONFIG_CMI,
-		CONFIG_NETVIA,     CONFIG_RBC823
+		CONFIG_NETVIA,     CONFIG_RBC823,     CONFIG_ZPC1900,
+		CONFIG_MPC8540ADS, CONFIG_MPC8560ADS

 		ARM based boards:
 		-----------------
@@ -363,7 +372,7 @@ The following options need to be configured:
 		CONFIG_IMPA7,       CONFIG_LART,       CONFIG_LUBBOCK,
 		CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610
 		CONFIG_SHANNON,     CONFIG_SMDK2400,   CONFIG_SMDK2410,
-		CONFIG_TRAB,	    CONFIG_AT91RM9200DK
+		CONFIG_TRAB,	    CONFIG_VCMA9,      CONFIG_AT91RM9200DK


 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -392,19 +401,20 @@ The following options need to be configured:
 		Possible values are:
 			CFG_8260ADS	- original MPC8260ADS
 			CFG_8266ADS	- MPC8266ADS (untested)
-			CFG_PQ2FADS	- PQ2FADS-ZU
+			CFG_PQ2FADS	- PQ2FADS-ZU or PQ2FADS-VR


 - MPC824X Family Member (if CONFIG_MPC824X is defined)
-	Define exactly one of
-	CONFIG_MPC8240, CONFIG_MPC8245
+		Define exactly one of
+		CONFIG_MPC8240, CONFIG_MPC8245

 - 8xx CPU Options: (if using an 8xx cpu)
 		Define one or more of
-		CONFIG_8xx_GCLK_FREQ	- if get_gclk_freq() can not work e.g.
-					  no 32KHz reference PIT/RTC clock
+		CONFIG_8xx_GCLK_FREQ	- if get_gclk_freq() cannot work
+					  e.g. if there is no 32KHz
+					  reference PIT/RTC clock

- Clock Interface:
+- Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ

 		U-Boot stores all clock information in Hz
@@ -414,11 +424,16 @@ The following options need to be configured:
 		"clocks_in_mhz" can be defined so that U-Boot
 		converts clock data to MHZ before passing it to the
 		Linux kernel.
-
 		When CONFIG_CLOCKS_IN_MHZ is defined, a definition of
 		"clocks_in_mhz=1" is  automatically  included  in  the
 		default environment.

+		CONFIG_MEMSIZE_IN_BYTES		[relevant for MIPS only]
+
+		When transfering memsize parameter to linux, some versions
+		expect it to be in bytes, others in MB.
+		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
+
 - Console Interface:
 		Depending on board, define exactly one serial port
 		(like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2,
@@ -472,6 +487,11 @@ The following options need to be configured:
 		default i/o. Serial console can be forced with
 		environment 'console=serial'.

+                When CONFIG_SILENT_CONSOLE is defined, all console
+                messages (by U-Boot and Linux!) can be silenced with
+                the "silent" environment variable. See
+                doc/README.silent for more information.
+
 - Console Baudrate:
 		CONFIG_BAUDRATE - in bps
 		Select one of the baudrates listed in
@@ -572,13 +592,18 @@ The following options need to be configured:
 		#define enables commands:
 		-------------------------
 		CFG_CMD_ASKENV	* ask for env variable
+		CFG_CMD_AUTOSCRIPT Autoscript Support
 		CFG_CMD_BDI	  bdinfo
 		CFG_CMD_BEDBUG	  Include BedBug Debugger
+		CFG_CMD_BMP     * BMP support
 		CFG_CMD_BOOTD	  bootd
 		CFG_CMD_CACHE	  icache, dcache
 		CFG_CMD_CONSOLE	  coninfo
 		CFG_CMD_DATE	* support for RTC, date/time...
 		CFG_CMD_DHCP	  DHCP support
+		CFG_CMD_DIAG    * Diagnostics
+		CFG_CMD_DOC     * Disk-On-Chip Support
+		CFG_CMD_DTT       Digital Therm and Thermostat
 		CFG_CMD_ECHO	* echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
 		CFG_CMD_ELF	  bootelf, bootvx
@@ -588,27 +613,37 @@ The following options need to be configured:
 		CFG_CMD_FDOS	* Dos diskette Support
 		CFG_CMD_FLASH	  flinfo, erase, protect
 		CFG_CMD_FPGA	  FPGA device initialization support
+		CFG_CMD_HWFLOW  * RTS/CTS hw flow control
 		CFG_CMD_I2C	* I2C serial bus support
 		CFG_CMD_IDE	* IDE harddisk support
 		CFG_CMD_IMI	  iminfo
+		CFG_CMD_IMLS      List all found images
 		CFG_CMD_IMMAP	* IMMR dump support
 		CFG_CMD_IRQ	* irqinfo
+		CFG_CMD_JFFS2   * JFFS2 Support
 		CFG_CMD_KGDB	* kgdb
 		CFG_CMD_LOADB	  loadb
 		CFG_CMD_LOADS	  loads
 		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
 				  loop, mtest
+		CFG_CMD_MISC      Misc functions like sleep etc
 		CFG_CMD_MMC	  MMC memory mapped support
 		CFG_CMD_MII	  MII utility commands
+		CFG_CMD_NAND    * NAND support
 		CFG_CMD_NET	  bootp, tftpboot, rarpboot
 		CFG_CMD_PCI	* pciinfo
 		CFG_CMD_PCMCIA	* PCMCIA support
+		CFG_CMD_PING    * send ICMP ECHO_REQUEST to network host
+		CFG_CMD_PORTIO    Port I/O
 		CFG_CMD_REGINFO * Register dump
 		CFG_CMD_RUN	  run command in env variable
+		CFG_CMD_SAVES     save S record dump
 		CFG_CMD_SCSI	* SCSI Support
+		CFG_CMD_SDRAM   * print SDRAM configuration information
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
+		CFG_CMD_VFD     * VFD support (TRAB)
 		CFG_CMD_BSP	* Board SPecific functions
 		-----------------------------------------------
 		CFG_CMD_ALL	all
@@ -870,9 +905,9 @@ The following options need to be configured:
 		images is included. If not, only uncompressed and gzip
 		compressed images are supported.

-                NOTE: the bzip2 algorithm requires a lot of RAM, so
-                the malloc area (as defined by CFG_MALLOC_LEN) should
-                be at least 4MB.
+		NOTE: the bzip2 algorithm requires a lot of RAM, so
+		the malloc area (as defined by CFG_MALLOC_LEN) should
+		be at least 4MB.

 - Ethernet address:
 		CONFIG_ETHADDR
@@ -1400,7 +1435,13 @@ The following options need to be configured:
   -1	common/cmd_ide.c	Read Error on boot device
   -1	common/cmd_ide.c	Image header has bad magic number

-   -1	common/cmd_nvedit.c	Environment not changable, but has bad CRC
+   -1	common/cmd_nand.c	Bad usage of "nand" command
+   -1	common/cmd_nand.c	No boot device
+   -1	common/cmd_nand.c	Unknown Chip ID on boot device
+   -1	common/cmd_nand.c	Read Error on boot device
+   -1	common/cmd_nand.c	Image header has bad magic number
+
+   -1	common/env_common.c     Environment has a bad CRC, using default


 Modem Support:
@@ -1482,6 +1523,10 @@ Configuration Settings:
 - CFG_ALT_MEMTEST:
 		Enable an alternate, more extensive memory test.

+- CFG_MEMTEST_SCRATCH:
+		Scratch address used by the alternate memory test
+		You only need to set this if address zero isn't writeable
+
 - CFG_TFTP_LOADADDR:
 		Default load address for network file downloads

@@ -1723,6 +1768,14 @@ Note: once the monitor has been relocated, then it will complain if
 the default environment is used; a new CRC is computed as soon as you
 use the "saveenv" command to store a valid environment.

+- CFG_FAULT_ECHO_LINK_DOWN:
+		Echo the inverted Ethernet link state to the fault LED.
+
+		Note: If this option is active, then CFG_FAULT_MII_ADDR
+		      also needs to be defined.
+
+- CFG_FAULT_MII_ADDR:
+		MII address of the PHY to check for the Ethernet link state.

 Low Level (hardware related) configuration options:
 ---------------------------------------------------
@@ -1733,9 +1786,9 @@ Low Level (hardware related) configuration options:
 - CFG_DEFAULT_IMMR:
 		Default address of the IMMR after system reset.

-                Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
-                and RPXsuper) to be able to adjust the position of
-                the IMMR register after a reset.
+		Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
+		and RPXsuper) to be able to adjust the position of
+		the IMMR register after a reset.

 - Floppy Disk Support:
 		CFG_FDC_DRIVE_NUMBER
@@ -1909,7 +1962,9 @@ configurations; the following names are supported:
    GEN860T_config	  EBONY_config		FPS860L_config
    ELPT860_config	  cmi_mpc5xx_config	NETVIA_config
    at91rm9200dk_config	  omap1510inn_config	MPC8260ADS_config
-    omap1610inn_config
+    omap1610inn_config	  ZPC1900_config	MPC8540ADS_config
+    MPC8560ADS_config
+
 Note: for some board special configuration names may exist; check  if
      additional  information is available from the board vendor; for
      instance, the TQM8xxL systems run normally at 50 MHz and use  a
@@ -2275,8 +2330,8 @@ defines the following image properties:
  LynxOS, pSOS, QNX, RTEMS, ARTOS;
  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
 * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
-  IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
-  Currently supported: PowerPC).
+  IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
+  Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
 * Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point
--- a/board/RRvision/RRvision.c
+++ b/board/RRvision/RRvision.c
@@ -230,8 +230,8 @@ static long int dram_size (long int mamr_value, long int *base,
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile long int *addr;
-	ulong cnt, val;
-	ulong save[32];			/* to make test non-destructive */
+ 	ulong cnt, val, size;
+ 	ulong save[32];			/* to make test non-destructive */
 	unsigned char i = 0;

 	memctl->memc_mamr = mamr_value;
@@ -250,7 +250,13 @@ static long int dram_size (long int mamr_value, long int *base,

 	/* check at base address */
 	if ((val = *addr) != 0) {
+		/* Restore the original data before leaving the function.
+		 */
 		*addr = save[i];
+		for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) {
+			addr  = (volatile ulong *) base + cnt;
+			*addr = save[--i];
+		}
 		return (0);
 	}

@@ -261,7 +267,14 @@ static long int dram_size (long int mamr_value, long int *base,
 		*addr = save[--i];

 		if (val != (~cnt)) {
-			return (cnt * sizeof (long));
+			size = cnt * sizeof (long);
+			/* Restore the original data before returning
+			 */
+			for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+				addr  = (volatile ulong *) base + cnt;
+				*addr = save[--i];
+			}
+			return (size);
 		}
 	}
 	return (maxsize);
--- a/board/adderII/adderII.h
+++ b/board/adderII/adderII.h
@@ -41,5 +41,3 @@
 * | 			   |
 * | ...                   |
 *****************************************************************************/
-
-
--- a/board/adderII/config.mk
+++ b/board/adderII/config.mk
@@ -26,4 +26,3 @@
 #

 TEXT_BASE = 0xFE000000
-
--- a/board/adderII/u-boot.lds
+++ b/board/adderII/u-boot.lds
@@ -144,4 +144,3 @@ SECTIONS
  _end = . ;
  PROVIDE (end = .);
 }
-
--- a/board/at91rm9200dk/at91rm9200dk.c
+++ b/board/at91rm9200dk/at91rm9200dk.c
@@ -66,7 +66,7 @@ int dram_init (void)
 * The NAND lives in the CS2* space
 */
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
-extern void nand_probe (ulong physadr);
+extern ulong nand_probe (ulong physadr);

 #define AT91_SMARTMEDIA_BASE 0x40000000	/* physical address to access memory on NCS3 */
 void nand_init (void)
@@ -103,10 +103,12 @@ void nand_init (void)
 	*AT91C_PIOB_ODR = AT91C_PIO_PB1;	/* disable output */

 	if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
-		printf ("No ");
-	printf ("SmartMedia card inserted\n");
+		printf ("  No SmartMedia card inserted\n");
+#ifdef DEBUG
+	printf ("  SmartMedia card inserted\n");

 	printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
-	nand_probe (AT91_SMARTMEDIA_BASE);
+#endif
+	printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
 }
 #endif
--- a/board/at91rm9200dk/flash.c
+++ b/board/at91rm9200dk/flash.c
@@ -160,7 +160,7 @@ ulong flash_init (void)
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
-			panic ("configured to many flash banks!\n");
+			panic ("configured too many flash banks!\n");

 		sector = 0;
 		start_address = flashbase;
--- a/board/atc/atc.c
+++ b/board/atc/atc.c
@@ -92,20 +92,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
 	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
 	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   0,   0,   0,   0,   0   }, /* PB17 */
-	/* PB16 */ {   0,   0,   0,   0,   0,   0   }, /* PB16 */
-	/* PB15 */ {   0,   0,   0,   0,   0,   0   }, /* PB15 */
-	/* PB14 */ {   0,   0,   0,   0,   0,   0   }, /* PB14 */
-	/* PB13 */ {   0,   0,   0,   0,   0,   0   }, /* PB13 */
-	/* PB12 */ {   0,   0,   0,   0,   0,   0   }, /* PB12 */
-	/* PB11 */ {   0,   0,   0,   0,   0,   0   }, /* PB11 */
-	/* PB10 */ {   0,   0,   0,   0,   0,   0   }, /* PB10 */
-	/* PB9  */ {   0,   0,   0,   0,   0,   0   }, /* PB9 */
-	/* PB8  */ {   0,   0,   0,   0,   0,   0   }, /* PB8 */
-	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
-	/* PB6  */ {   0,   0,   0,   0,   0,   0   }, /* PB6 */
-	/* PB5  */ {   0,   0,   0,   0,   0,   0   }, /* PB5 */
-	/* PB4  */ {   0,   0,   0,   0,   0,   0   }, /* PB4 */
+	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_DV */
+	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_ER */
+	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_ER */
+	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_EN */
+	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII COL */
+	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CRS */
+	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD */
+	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD */
+	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD */
+	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD */
+	/* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD */
+	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD */
+	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD */
+	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD */
 	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* PB3 */
 	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* PB2 */
 	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* PB1 */
@@ -128,8 +128,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII TX_CLK */
 	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
 	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
-	/* PC17 */ {   0,   0,   0,   0,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   0,   0,   0,   0,   0   }, /* PC16 */
+	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_CLK */
+	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII TX_CLK */
 #if 0
 	/* PC15 */ {   0,   0,   0,   0,   0,   0   }, /* PC15 */
 #else
@@ -269,7 +269,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 			  ulong orx, volatile uchar * base)
 {
 	volatile uchar c = 0xff;
-	ulong cnt, val;
+	ulong cnt, val, size;
 	volatile ulong *addr;
 	volatile uint *sdmr_ptr;
 	volatile uint *orx_ptr;
@@ -344,7 +344,13 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	*addr = 0;

 	if ((val = *addr) != 0) {
+		/* Restore the original data before leaving the function.
+		 */
 		*addr = save[i];
+		for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) {
+			addr  = (volatile ulong *) base + cnt;
+			*addr = save[--i];
+		}
 		return (0);
 	}

@@ -353,10 +359,17 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 		val = *addr;
 		*addr = save[--i];
 		if (val != ~cnt) {
+			size = cnt * sizeof (long);
+			/* Restore the original data before returning
+			 */
+			for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+				addr  = (volatile ulong *) base + cnt;
+				*addr = save[--i];
+			}
 			/* Write the actual size to ORx
 			 */
-			*orx_ptr = orx | ~(cnt * sizeof (long) - 1);
-			return (cnt * sizeof (long));
+			*orx_ptr = orx | ~(size - 1);
+			return (size);
 		}
 	}
 	return (maxsize);
--- a/board/c2mon/c2mon.c
+++ b/board/c2mon/c2mon.c
@@ -228,8 +228,8 @@ static long int dram_size (long int mamr_value, long int *base,
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile long int *addr;
-	ulong cnt, val;
-	ulong save[32];			/* to make test non-destructive */
+ 	ulong cnt, val, size;
+ 	ulong save[32];			/* to make test non-destructive */
 	unsigned char i = 0;

 	memctl->memc_mamr = mamr_value;
@@ -248,7 +248,13 @@ static long int dram_size (long int mamr_value, long int *base,

 	/* check at base address */
 	if ((val = *addr) != 0) {
+		/* Restore the original data before leaving the function.
+		 */
 		*addr = save[i];
+		for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) {
+			addr  = (volatile ulong *) base + cnt;
+			*addr = save[--i];
+		}
 		return (0);
 	}

@@ -259,7 +265,14 @@ static long int dram_size (long int mamr_value, long int *base,
 		*addr = save[--i];

 		if (val != (~cnt)) {
-			return (cnt * sizeof (long));
+			size = cnt * sizeof (long);
+			/* Restore the original data before returning
+			 */
+			for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+				addr  = (volatile ulong *) base + cnt;
+				*addr = save[--i];
+			}
+			return (size);
 		}
 	}
 	return (maxsize);
--- a/board/cradle/flash.c
+++ b/board/cradle/flash.c
@@ -59,7 +59,7 @@ ulong flash_init(void)
 		flashbase = PHYS_FLASH_2;
 		break;
 	 default:
-		panic("configured to many flash banks!\n");
+		panic("configured too many flash banks!\n");
 		break;
      }
      for (j = 0; j < flash_info[i].sector_count; j++)
--- a/board/csb226/flash.c
+++ b/board/csb226/flash.c
@@ -62,7 +62,7 @@ ulong flash_init(void)
 				flashbase = PHYS_FLASH_1;
 				break;
 			default:
-				panic("configured to many flash banks!\n");
+				panic("configured too many flash banks!\n");
 				break;
 		}
 		for (j = 0; j < flash_info[i].sector_count; j++) {
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -51,7 +51,7 @@ int gunzip(void *, int, unsigned char *, int *);
 int board_pre_init (void)
 {
 	out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
-        out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
+	out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */

 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -68,7 +68,7 @@ int board_pre_init (void)
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
 	mtdcr(uicer, 0x00000000);       /* disable all ints */
 	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
-	mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+	mtdcr(uicpr, 0xFFFFFF80);       /* set int polarities */
 	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
 	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
 	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
@@ -255,16 +255,23 @@ int testdram (void)
 /* ------------------------------------------------------------------------- */

 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
-extern void
+extern ulong
 nand_probe(ulong physadr);

 void
 nand_init(void)
 {
+	ulong totlen = 0;
+
+#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) || \
+    (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI)
 	debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
-	nand_probe (CFG_NAND0_BASE);
+	totlen += nand_probe (CFG_NAND0_BASE);
+#endif	/* CONFIG_PPCHAMELEON_MODULE_ME, CONFIG_PPCHAMELEON_MODULE_HI */

 	debug ("Probing at 0x%.8x\n", CFG_NAND1_BASE);
-	nand_probe (CFG_NAND1_BASE);
+	totlen += nand_probe (CFG_NAND1_BASE);
+
+	printf ("%4lu MB\n", totlen >>20);
 }
 #endif
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -46,8 +46,8 @@ unsigned long flash_init (void)
 #else
 	unsigned long size_b0;
 	int i;
-        uint pbcr;
-        unsigned long base_b0;
+	uint pbcr;
+	unsigned long base_b0;
 	int size_val = 0;

 	/* Init: no FLASHes known */
@@ -64,14 +64,14 @@ unsigned long flash_init (void)
 			size_b0, size_b0<<20);
 	}

-        /* Setup offsets */
-        flash_get_offsets (-size_b0, &flash_info[0]);
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);

-        /* Re-do sizing to get full correct info */
-        mtdcr(ebccfga, pb0cr);
-        pbcr = mfdcr(ebccfgd);
-        mtdcr(ebccfga, pb0cr);
-        base_b0 = -size_b0;
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
 		size_val = 0;
@@ -90,15 +90,15 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-        mtdcr(ebccfgd, pbcr);
+	mtdcr(ebccfgd, pbcr);

-        /* Monitor protection ON by default */
-        (void)flash_protect(FLAG_PROTECT_SET,
-                            -CFG_MONITOR_LEN,
-                            0xffffffff,
-                            &flash_info[0]);
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);

-        flash_info[0].size = size_b0;
+	flash_info[0].size = size_b0;

 	return (size_b0);
 #endif
--- a/board/dave/common/flash.c
+++ b/board/dave/common/flash.c
@@ -40,11 +40,11 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 	short n;

 	/* set up sector start address table */
-        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
 	    for (i = 0; i < info->sector_count; i++)
 		info->start[i] = base + (i * 0x00010000);
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
@@ -58,7 +58,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 			base += 64 << 10;
 			++i;
 		}
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
@@ -75,7 +75,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-        } else {
+	} else {
 	    if (info->flash_id & FLASH_BTYPE) {
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
@@ -103,10 +103,10 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 void flash_print_info  (flash_info_t *info)
 {
 	int i;
-        int k;
-        int size;
-        int erased;
-        volatile unsigned long *flash;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;

 	if (info->flash_id == FLASH_UNKNOWN) {
 		printf ("missing or unknown FLASH type\n");
@@ -164,28 +164,28 @@ void flash_print_info  (flash_info_t *info)
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
 #ifdef CFG_FLASH_EMPTY_INFO
-                /*
-                 * Check if whole sector is erased
-                 */
-                if (i != (info->sector_count-1))
-                  size = info->start[i+1] - info->start[i];
-                else
-                  size = info->start[0] + info->size - info->start[i];
-                erased = 1;
-                flash = (volatile unsigned long *)info->start[i];
-                size = size >> 2;        /* divide by 4 for longword access */
-                for (k=0; k<size; k++)
-                  {
-                    if (*flash++ != 0xffffffff)
-                      {
-                        erased = 0;
-                        break;
-                      }
-                  }
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count-1))
+		  size = info->start[i+1] - info->start[i];
+		else
+		  size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;        /* divide by 4 for longword access */
+		for (k=0; k<size; k++)
+		  {
+		    if (*flash++ != 0xffffffff)
+		      {
+			erased = 0;
+			break;
+		      }
+		  }

 		if ((i % 5) == 0)
 			printf ("\n   ");
-                /* print empty and read-only info */
+		/* print empty and read-only info */
 		printf (" %08lX%s%s",
 			info->start[i],
 			erased ? " E" : "  ",
@@ -219,7 +219,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	short n;
 	CFG_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-        volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;

 	/* Write auto select command: read Manufacturer ID */
 	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
@@ -288,42 +288,42 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		break;				/* => 2 MB		*/

 	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
-	        info->flash_id += FLASH_STMW320DT;
-	        info->sector_count = 67;
+		info->flash_id += FLASH_STMW320DT;
+		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
-	        info->flash_id += FLASH_AM320T;
-	        info->sector_count = 71;
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
-	        info->flash_id += FLASH_AM320B;
+		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
-	        info->flash_id += FLASH_AMDL322T;
-	        info->sector_count = 71;
+		info->flash_id += FLASH_AMDL322T;
+		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
-	        info->flash_id += FLASH_AMDL322B;
+		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
-	        info->flash_id += FLASH_AMDL323T;
+		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
-	        info->flash_id += FLASH_AMDL323B;
+		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/

 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
-	        info->flash_id += FLASH_AM640U;
+		info->flash_id += FLASH_AM640U;
 		info->sector_count = 128;
 		info->size = 0x00800000;  break;	/* => 8 MB	*/

@@ -346,11 +346,11 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	}

 	/* set up sector start address table */
-        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
 	    for (i = 0; i < info->sector_count; i++)
 		info->start[i] = base + (i * 0x00010000);
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
@@ -364,7 +364,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			base += 64 << 10;
 			++i;
 		}
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
@@ -381,13 +381,13 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-        } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
 		/* set sector offsets for top boot block type		*/
 		base += info->size;
 		i = info->sector_count;
-                /*  1 x 16k boot sector */
+		/*  1 x 16k boot sector */
 		base -= 16 << 10;
-                --i;
+		--i;
 		info->start[i] = base;
 		/*  2 x 8k  boot sectors */
 		for (n=0; n<2; ++n) {
@@ -395,9 +395,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-                /*  1 x 32k boot sector */
+		/*  1 x 32k boot sector */
 		base -= 32 << 10;
-                --i;
+		--i;
 		info->start[i] = base;

 		while (i > 0) {			/* 64k regular sectors	*/
@@ -405,7 +405,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-        } else {
+	} else {
 	    if (info->flash_id & FLASH_BTYPE) {
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
@@ -432,10 +432,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
 		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
-                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-                  info->protect[i] = 0;
-                else
-                  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+		  info->protect[i] = 0;
+		else
+		  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
 	}

 	/*
@@ -459,7 +459,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	volatile CFG_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
-        int i;
+	int i;

 	if ((s_first < 0) || (s_first > s_last)) {
 		if (info->flash_id == FLASH_UNKNOWN) {
@@ -498,25 +498,25 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
 		    addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
-                    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                        addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                        addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                        addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
-                        for (i=0; i<50; i++)
-                          udelay(1000);  /* wait 1 ms */
-                    } else {
-                        if (sect == s_first) {
-                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                            addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                            addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                        }
-                        addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-                    }
+		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			for (i=0; i<50; i++)
+			  udelay(1000);  /* wait 1 ms */
+		    } else {
+			if (sect == s_first) {
+			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			}
+			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+		    }
 		    l_sect = sect;
 		}
 	}
@@ -637,42 +637,42 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-        volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-        volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-        volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
-        int i;
+	int i;

 	/* Check if Flash is (sufficiently) erased */
 	if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
-             (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+	     (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();

-        for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
-          {
-            addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-            addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-            addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+	  {
+	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+	    addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;

-            dest2[i] = data2[i];
+	    dest2[i] = data2[i];

-            /* re-enable interrupts if necessary */
-            if (flag)
-              enable_interrupts();
+	    /* re-enable interrupts if necessary */
+	    if (flag)
+	      enable_interrupts();

-            /* data polling for D7 */
-            start = get_timer (0);
-            while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-                   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-              if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-                return (1);
-              }
-            }
-          }
+	    /* data polling for D7 */
+	    start = get_timer (0);
+	    while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
+		   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
+	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		return (1);
+	      }
+	    }
+	  }

 	return (0);
 }
--- a/board/dave/common/fpga.c
+++ b/board/dave/common/fpga.c
@@ -57,16 +57,16 @@
 #define SET_FPGA(data)         out32(GPIO0_OR, data)

 #define FPGA_WRITE_1 {                                                    \
-        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */

 #define FPGA_WRITE_0 {                                                    \
-        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-        SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+	SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */

 #if 0
 static int fpga_boot (unsigned char *fpgadata, int size)
--- a/board/dbau1x00/Makefile
+++ b/board/dbau1x00/Makefile
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+SOBJS	= memsetup.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/dbau1x00/README
+++ b/board/dbau1x00/README
@@ -0,0 +1,53 @@
+By Thomas.Lange@corelatus.se 2003-10-06
+----------------------------------------
+DbAu1000 is a development board from AMD containing
+an Alchemy AU1000 with mips32 core.
+
+Limitations & comments
+----------------------
+I assume that you set board to BIG endian!
+Little endian not tested, most probably broken.
+
+I named the board dbau1x00, to allow
+support for all three development boards
+some day ( dbau1000, dbau1100 and dbau1500 ).
+
+I only have a dbau1000, so all testing is limited
+to this board!
+
+The board has two different flash banks, that can
+be selected via dip switch. This makes it possible
+to test new bootloaders without thrashing the YAMON
+boot loader deliviered with board.
+
+Ethernet only supported for mac0.
+
+Pcmcia only supported for slot 0, only 3.3V.
+
+Pcmcia IDE tested with Sandisk Compact Flash and
+IBM microdrive.
+
+###################################
+########     NOTE!!!!!!   #########
+###################################
+If you partition a disk on another system (e.g. laptop),
+all bytes will be swapped on 16bit level when using
+PCMCIA!!!!
+
+This is probably due to an error in Au1000 chip.
+
+Solution:
+
+a) Boot via network and partition disk directly from
+dbau1x00. The endian will then be correct.
+
+b) Partition disk on "laptop" and fill it with all files
+you need. Then write a simple program that endian swaps
+whole disk,
+
+Example:
+Original "laptop" byte order:
+B0 B1 B2 B3 B4 B5 B6 B7 B8 B9...
+
+Dbau1000 byte order will then be:
+B1 B0 B3 B2 B5 B4 B7 B6 B9 B8...
--- a/board/dbau1x00/config.mk
+++ b/board/dbau1x00/config.mk
@@ -0,0 +1,32 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMD development board AMD Alchemy DbAu1x00, MIPS32 core
+#
+
+# ROM version
+TEXT_BASE = 0xbfc00000
+
+# RAM version
+#TEXT_BASE = 0x80100000
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2003
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+long int initdram(int board_type)
+{
+	/* Sdram is setup by assembler code */
+	/* If memory could be changed, we should return the true value here */
+	return 64*1024*1024;
+}
+
+#define BCSR_PCMCIA_PC0DRVEN		0x0010
+#define BCSR_PCMCIA_PC0RST		0x0080
+
+/* In cpu/mips/cpu.c */
+void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
+
+int checkboard (void)
+{
+	u16 status;
+	volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10);
+	volatile u32 *phy = (u32*)(DB1000_BCSR_ADDR+0xC);
+	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
+	u32 proc_id;
+
+	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
+
+	proc_id = read_32bit_cp0_register(CP0_PRID);
+
+	switch(proc_id>>24){
+	case 0:
+	  puts("Board: Merlot (DbAu1000)\n");
+	  printf("CPU: Au1000 396 MHz, id: 0x%02x, rev: 0x%02x\n",
+		 (proc_id>>8)&0xFF,proc_id&0xFF);
+	  break;
+	default:
+	  printf("Unsupported cpu %d, proc_id=0x%x\n",proc_id>>24,proc_id);
+	}
+#ifdef CONFIG_IDE_PCMCIA
+	/* Enable 3.3 V on slot 0 ( VCC )
+	   No 5V */
+	status = 4;
+	*pcmcia_bcsr = status;
+
+	status |= BCSR_PCMCIA_PC0DRVEN;
+	*pcmcia_bcsr = status;
+	au_sync();
+
+	udelay(300*1000);
+
+	status |= BCSR_PCMCIA_PC0RST;
+	*pcmcia_bcsr = status;
+	au_sync();
+
+	udelay(100*1000);
+
+	/* PCMCIA is on a 36 bit physical address.
+	   We need to map it into a 32 bit addresses */
+
+#if 0
+	/* We dont need theese unless we run whole pcmcia package */
+	write_one_tlb(20,                 /* index */
+		      0x01ffe000,         /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_IO_BASE, /* Hi */
+		      0x3C000017,         /* Lo0 */
+		      0x3C200017);        /* Lo1 */
+
+	write_one_tlb(21,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_ATTR_BASE, /* Hi */
+		      0x3D000017,           /* Lo0 */
+		      0x3D200017);          /* Lo1 */
+#endif
+	write_one_tlb(22,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
+		      0x3E000017,           /* Lo0 */
+		      0x3E200017);          /* Lo1 */
+
+	/* Release reset of ethernet PHY chips */
+	/* Always do this, because linux does not know about it */
+	*phy = 3;
+
+	return 0;
+#endif
+}
--- a/board/dbau1x00/flash.c
+++ b/board/dbau1x00/flash.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+	printf ("Skipping flash_init\n");
+	return (0);
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	printf ("write_buff not implemented\n");
+	return (-1);
+}
--- a/board/dbau1x00/memsetup.S
+++ b/board/dbau1x00/memsetup.S
@@ -0,0 +1,118 @@
+/* Memory sub-system initialization code */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/au1x00.h>
+
+	.globl	memsetup
+memsetup:
+	/* First setup pll:s to make serial work ok */
+	/* We have a 12 MHz crystal */
+	li              t0, SYS_CPUPLL
+	li              t1, 0x21 /* 396 MHz */
+	sw              t1, 0(t0)
+	sync
+	nop
+
+	/* Setup AUX PLL */
+	li              t0, SYS_AUXPLL
+	li              t1, 8 /* 96 MHz */
+	sw              t1, 0(t0) /* aux pll */
+	sync
+
+/* SDCS 0,1 SDRAM */
+	li		t0, MEM_SDMODE0
+	li		t1, 0x005522AA
+	sw		t1, 0(t0)
+
+	li              t0, MEM_SDMODE1
+	li		t1, 0x005522AA
+	sw		t1, 0(t0)
+
+	li              t0, MEM_SDADDR0
+	li		t1, 0x001003F8
+	sw		t1, 0(t0)
+
+
+	li              t0, MEM_SDADDR1
+	li		t1, 0x001023F8
+	sw		t1, 0(t0)
+	sync
+
+	li              t0, MEM_SDREFCFG
+	li		t1, 0x64000C24 /* Disable */
+	sw		t1, 0(t0)
+	sync
+
+	li              t0, MEM_SDPRECMD
+	sw		zero, 0(t0)
+	sync
+
+	li              t0, MEM_SDAUTOREF
+	sw		zero, 0(t0)
+	sync
+	sw		zero, 0(t0)
+	sync
+
+	li              t0, MEM_SDREFCFG
+	li		t1, 0x66000C24 /* Enable */
+	sw		t1, 0(t0)
+	sync
+
+	li              t0, MEM_SDWRMD0
+	li		t1, 0x00000033
+	sw		t1, 0(t0)
+	sync
+
+	li              t0, MEM_SDWRMD1
+	li		t1, 0x00000033
+	sw		t1, 0(t0)
+	sync
+
+	/*  Static memory controller */
+
+	/* RCE0 AMD 29LV640M MirrorBit Flash */
+	li              t0, MEM_STCFG0
+	li		t1, 0x00000003
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STTIME0
+	li		t1, 0x22080b20
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STADDR0
+	li		t1, 0x11E03F80
+	sw		t1, 0(t0)
+
+	/* RCE1 CPLD Board Logic */
+	li		t0, MEM_STCFG1
+	li		t1, 0x00000080
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STTIME1
+	li		t1, 0x22080a20
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STADDR1
+	li		t1, 0x10c03f00
+	sw		t1, 0(t0)
+
+	/* RCE3 PCMCIA 250ns */
+	li		t0, MEM_STCFG3
+	li		t1, 0x00000002
+	sw		t1, 0(t0)
+
+
+	li		t0, MEM_STTIME3
+	li		t1, 0x280E3E07
+	sw		t1, 0(t0)
+
+	li		t0, MEM_STADDR3
+	li		t1, 0x10000000
+	sw		t1, 0(t0)
+
+	sync
+
+	j	ra
+	nop
--- a/board/dbau1x00/u-boot.lds
+++ b/board/dbau1x00/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = ALIGN(4);
+	.sdata  : { *(.sdata) }
+
+	_gp = ALIGN(16);
+
+	__got_start = .;
+	.got  : { *(.got) }
+	__got_end = .;
+
+	.sdata  : { *(.sdata) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss  : { *(.sbss) }
+	.bss  : { *(.bss) }
+	uboot_end = .;
+}
--- a/board/dk1c20/Makefile
+++ b/board/dk1c20/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+
+SOBJS  = vectors.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/dk1c20/config.mk
+++ b/board/dk1c20/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2003
+# Psyent Corporation
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x018c0000
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
--- a/board/dk1c20/dk1c20.c
+++ b/board/dk1c20/dk1c20.c
@@ -0,0 +1,45 @@
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+void _default_hdlr (void)
+{
+	printf ("default_hdlr\n");
+}
+
+int board_pre_init (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	puts ("Board: Altera Nios 1C20 Development Kit\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return (0);
+}
--- a/board/dk1c20/flash.c
+++ b/board/dk1c20/flash.c
@@ -0,0 +1,226 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <nios.h>
+
+/*---------------------------------------------------------------------*/
+#define BANKSZ	(8 * 1024 * 1024)
+#define SECTSZ	(64 * 1024)
+#define USERFLASH (2 * 1024 * 1024)	/* bottom 2 MB for user */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define FLASH_WORD_SIZE unsigned char
+
+/*---------------------------------------------------------------------*/
+
+unsigned long flash_init (void)
+{
+	int i;
+	unsigned long addr;
+	flash_info_t *fli = &flash_info[0];
+
+	fli->size = BANKSZ;
+	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->flash_id = FLASH_MAN_AMD;
+
+	addr = CFG_FLASH_BASE;
+	for (i = 0; i < fli->sector_count; ++i) {
+		fli->start[i] = addr;
+		addr += SECTSZ;
+
+		/* Protect all but 2 MByte user area */
+		if (addr < (CFG_FLASH_BASE + USERFLASH))
+			fli->protect[i] = 0;
+		else
+			fli->protect[i] = 1;
+	}
+
+	return (BANKSZ);
+}
+
+/*--------------------------------------------------------------------*/
+void flash_print_info (flash_info_t * info)
+{
+	int i, k;
+	unsigned long size;
+	int erased;
+	volatile unsigned char *flash;
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+
+		/* Check if whole sector is erased */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned char *) info->start[i];
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		/* Print the info */
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s%s", info->start[i], erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   ");
+	}
+	printf ("\n");
+}
+
+/*-------------------------------------------------------------------*/
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+	volatile FLASH_WORD_SIZE *addr2;
+	int prot, sect;
+	int any = 0;
+	unsigned oldpri;
+	ulong start;
+
+	/* Some sanity checking */
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	/* NOTE: disabling interrupts on Nios can be very bad since it
+	 * also disables the LO_LIMIT exception. It's better here to
+	 * set the interrupt priority to 3 & restore it when we're done.
+	 */
+	oldpri = ipri (3);
+
+	/* It's ok to erase multiple sectors provided we don't delay more
+	 * than 50 usec between cmds ... at which point the erase time-out
+	 * occurs. So don't go and put printf() calls in the loop ... it
+	 * won't be very helpful ;-)
+	 */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+			*addr = 0xaa;
+			*addr = 0x55;
+			*addr = 0x80;
+			*addr = 0xaa;
+			*addr = 0x55;
+			*addr2 = 0x30;
+			any = 1;
+		}
+	}
+
+	/* Now just wait for 0xff & provide some user feedback while
+	 * we wait.
+	 */
+	if (any) {
+		addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+		start = get_timer (0);
+		while (*addr2 != 0xff) {
+			udelay (1000 * 1000);
+			putc ('.');
+			if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+				printf ("timeout\n");
+				return 1;
+			}
+		}
+		printf ("\n");
+	}
+
+	/* Restore interrupt priority */
+	ipri (oldpri);
+
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+
+	vu_char *cmd = (vu_char *) info->start[0];
+	vu_char *dst = (vu_char *) addr;
+	unsigned char b;
+	unsigned oldpri;
+	ulong start;
+
+	while (cnt) {
+		/* Check for sufficient erase */
+		b = *src;
+		if ((*dst & b) != b) {
+			printf ("%02x : %02x\n", *dst, b);
+			return (2);
+		}
+
+		/* Disable interrupts other than window underflow
+		 * (interrupt priority 2)
+		 */
+		oldpri = ipri (3);
+		*cmd = 0xaa;
+		*cmd = 0x55;
+		*cmd = 0xa0;
+		*dst = b;
+
+		/* Verify write */
+		start = get_timer (0);
+		while (*dst != b) {
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				ipri (oldpri);
+				return 1;
+			}
+		}
+		dst++;
+		src++;
+		cnt--;
+		ipri (oldpri);
+	}
+
+	return (0);
+}
--- a/board/dk1c20/u-boot.lds
+++ b/board/dk1c20/u-boot.lds
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-nios")
+OUTPUT_ARCH(nios)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  cpu/nios/start.o (.text)
+	  *(.text)
+	}
+	__text_end = .;
+
+	. = ALIGN(4);
+	.rodata :
+	{
+		*(.rodata)
+	}
+	__rodata_end = .;
+
+	. = ALIGN(4);
+	.data :
+	{
+		*(.data)
+	}
+	. = ALIGN(4);
+	__data_end = .;
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd :
+	{
+		*(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	__bss_start = .;
+	. = ALIGN(4);
+	.bss :
+	{
+		*(.bss)
+	}
+	. = ALIGN(4);
+	__bss_end = .;
+}
--- a/board/dk1c20/vectors.S
+++ b/board/dk1c20/vectors.S
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*************************************************************************
+ * Exception Vector Table
+ *
+ * This could have gone in the cpu soure tree, but the whole point of
+ * Nios is customization -- and polluting the cpu source tree with
+ * board-specific ifdef's really defeats the purpose, no? With this in
+ * the board-specific tree, each board has the freedom to organize
+ * vectors/traps, etc anyway it wants. The init code copies this table
+ * to the proper location.
+ *
+ * Each board can do what it likes here. But there are four "standard"
+ * handlers availble:
+ *
+ *	_cwp_lolimit	-Handles register window underflows.
+ *	_cwp_hilimit	-Handles register window overflows.
+ *	_timebase_int	-Increments the timebase.
+ *	_def_xhandler	-Default exception handler.
+ *
+ * _timebase_int handles a Nios Timer interrupt and increments the
+ * timestamp used for the get_timer(), reset_timer(), etc. routines. It
+ * expects the timer to be configured like the standard-32 low priority
+ * timer.
+ *
+ * _def_xhandler dispatches exceptions/traps via the external_interrupt()
+ * routine. This lets you use the irq_install_handler() and handle your
+ * interrupts/traps with code written in C.
+ ************************************************************************/
+
+	.data
+	.global _vectors
+	.align	4
+_vectors:
+
+	.long	_def_xhandler@h		/* Vector 0  - NMI */
+	.long	_cwp_lolimit@h		/* Vector 1  -  underflow */
+	.long	_cwp_hilimit@h		/* Vector 2  - overflow	*/
+
+	.long	_def_xhandler@h		/* Vector 3 - GNUPro debug */
+	.long	_def_xhandler@h		/* Vector 4 - GNUPro debug */
+	.long	_def_xhandler@h		/* Vector 5 - GNUPro debug */
+	.long	_def_xhandler@h		/* Vector 6 - future reserved */
+	.long	_def_xhandler@h		/* Vector 7 - future reserved */
+	.long	_def_xhandler@h		/* Vector 8 - future reserved */
+	.long	_def_xhandler@h		/* Vector 9 - future reserved */
+	.long	_def_xhandler@h		/* Vector 10 - future reserved */
+	.long	_def_xhandler@h		/* Vector 11 - future reserved */
+	.long	_def_xhandler@h		/* Vector 12 - future reserved */
+	.long	_def_xhandler@h		/* Vector 13 - future reserved */
+	.long	_def_xhandler@h		/* Vector 14 - future reserved */
+	.long	_def_xhandler@h		/* Vector 15 - future reserved */
+	.long	_def_xhandler@h		/* Vector 16 */
+	.long	_def_xhandler@h		/* Vector 17 */
+	.long	_def_xhandler@h		/* Vector 18 */
+	.long	_def_xhandler@h		/* Vector 19 */
+	.long	_def_xhandler@h		/* Vector 20 */
+	.long	_def_xhandler@h		/* Vector 21 */
+	.long	_def_xhandler@h		/* Vector 22 */
+	.long	_def_xhandler@h		/* Vector 23 */
+	.long	_def_xhandler@h		/* Vector 24 */
+	.long	_def_xhandler@h		/* Vector 25 */
+	.long	_def_xhandler@h		/* Vector 26 */
+	.long	_def_xhandler@h		/* Vector 27 */
+	.long	_def_xhandler@h		/* Vector 28 */
+	.long	_def_xhandler@h		/* Vector 29 */
+	.long	_def_xhandler@h		/* Vector 30 */
+	.long	_def_xhandler@h		/* Vector 31 */
+	.long	_def_xhandler@h		/* Vector 32 */
+	.long	_def_xhandler@h		/* Vector 33 */
+	.long	_def_xhandler@h		/* Vector 34 */
+	.long	_def_xhandler@h		/* Vector 35 */
+	.long	_def_xhandler@h		/* Vector 36 */
+	.long	_def_xhandler@h		/* Vector 37 */
+	.long	_def_xhandler@h		/* Vector 38 */
+	.long	_def_xhandler@h		/* Vector 39 */
+	.long	_def_xhandler@h		/* Vector 40 */
+	.long	_def_xhandler@h		/* Vector 41 */
+	.long	_def_xhandler@h		/* Vector 42 */
+	.long	_def_xhandler@h		/* Vector 43 */
+	.long	_def_xhandler@h		/* Vector 44 */
+	.long	_def_xhandler@h		/* Vector 45 */
+	.long	_def_xhandler@h		/* Vector 46 */
+	.long	_def_xhandler@h		/* Vector 47 */
+	.long	_def_xhandler@h		/* Vector 48 */
+	.long	_def_xhandler@h		/* Vector 49 */
+	.long	_timebase_int@h		/* Vector 50 - lopri timer*/
+	.long	_def_xhandler@h		/* Vector 51 */
+	.long	_def_xhandler@h		/* Vector 52 */
+	.long	_def_xhandler@h		/* Vector 53 */
+	.long	_def_xhandler@h		/* Vector 54 */
+	.long	_def_xhandler@h		/* Vector 55 */
+	.long	_def_xhandler@h		/* Vector 56 */
+	.long	_def_xhandler@h		/* Vector 57 */
+	.long	_def_xhandler@h		/* Vector 58 */
+	.long	_def_xhandler@h		/* Vector 59 */
+	.long	_def_xhandler@h		/* Vector 60 */
+	.long	_def_xhandler@h		/* Vector 61 */
+	.long	_def_xhandler@h		/* Vector 62 */
+	.long	_def_xhandler@h		/* Vector 63 */
--- a/board/dnp1110/flash.c
+++ b/board/dnp1110/flash.c
@@ -74,7 +74,7 @@ unsigned long flash_init (void)
 		 flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
 		break;
 	   default:
-		panic("configured to many flash banks!\n");
+		panic("configured too many flash banks!\n");
 		break;
 	}
 	size += flash_info[i].size;
--- a/board/ep7312/flash.c
+++ b/board/ep7312/flash.c
@@ -50,7 +50,7 @@ ulong flash_init (void)
 		if (i == 0)
 			flashbase = PHYS_FLASH_1;
 		else
-			panic ("configured to many flash banks!\n");
+			panic ("configured too many flash banks!\n");
 		for (j = 0; j < flash_info[i].sector_count; j++) {
 			flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
 		}
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -246,7 +246,6 @@ void nand_init(void)
 {
 	nand_probe(CFG_NAND_BASE);
 	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
-		puts("NAND:  ");
 		print_size(nand_dev_desc[0].totlen, "\n");
 	}
 }
--- a/board/esd/ash405/fpgadata.c
+++ b/board/esd/ash405/fpgadata.c
--- a/board/esd/common/xilinx_jtag/lenval.c
+++ b/board/esd/common/xilinx_jtag/lenval.c
@@ -0,0 +1,217 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: lenval.c                                      */
+/* abstract:  This file contains routines for using    */
+/*            the lenVal data structure.               */
+/*******************************************************/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include "lenval.h"
+#include "ports.h"
+
+
+/*****************************************************************************
+ * Function:     value
+ * Description:  Extract the long value from the lenval array.
+ * Parameters:   plvValue    - ptr to lenval.
+ * Returns:      long        - the extracted value.
+ *****************************************************************************/
+long value( lenVal*     plvValue )
+{
+	long    lValue;         /* result to hold the accumulated result */
+	short   sIndex;
+
+	lValue  = 0;
+	for ( sIndex = 0; sIndex < plvValue->len ; ++sIndex )
+	{
+		lValue <<= 8;                       /* shift the accumulated result */
+		lValue |= plvValue->val[ sIndex];   /* get the last byte first */
+	}
+
+	return( lValue );
+}
+
+/*****************************************************************************
+ * Function:     initLenVal
+ * Description:  Initialize the lenval array with the given value.
+ *               Assumes lValue is less than 256.
+ * Parameters:   plv         - ptr to lenval.
+ *               lValue      - the value to set.
+ * Returns:      void.
+ *****************************************************************************/
+void initLenVal( lenVal*    plv,
+		 long       lValue )
+{
+	plv->len    = 1;
+	plv->val[0] = (unsigned char)lValue;
+}
+
+/*****************************************************************************
+ * Function:     EqualLenVal
+ * Description:  Compare two lenval arrays with an optional mask.
+ * Parameters:   plvTdoExpected  - ptr to lenval #1.
+ *               plvTdoCaptured  - ptr to lenval #2.
+ *               plvTdoMask      - optional ptr to mask (=0 if no mask).
+ * Returns:      short   - 0 = mismatch; 1 = equal.
+ *****************************************************************************/
+short EqualLenVal( lenVal*  plvTdoExpected,
+		   lenVal*  plvTdoCaptured,
+		   lenVal*  plvTdoMask )
+{
+	short           sEqual;
+	short           sIndex;
+	unsigned char   ucByteVal1;
+	unsigned char   ucByteVal2;
+	unsigned char   ucByteMask;
+
+	sEqual  = 1;
+	sIndex  = plvTdoExpected->len;
+
+	while ( sEqual && sIndex-- )
+	{
+		ucByteVal1  = plvTdoExpected->val[ sIndex ];
+		ucByteVal2  = plvTdoCaptured->val[ sIndex ];
+		if ( plvTdoMask )
+		{
+			ucByteMask  = plvTdoMask->val[ sIndex ];
+			ucByteVal1  &= ucByteMask;
+			ucByteVal2  &= ucByteMask;
+		}
+		if ( ucByteVal1 != ucByteVal2 )
+		{
+			sEqual  = 0;
+		}
+	}
+
+	return( sEqual );
+}
+
+
+/*****************************************************************************
+ * Function:     RetBit
+ * Description:  return the (byte, bit) of lv (reading from left to right).
+ * Parameters:   plv     - ptr to lenval.
+ *               iByte   - the byte to get the bit from.
+ *               iBit    - the bit number (0=msb)
+ * Returns:      short   - the bit value.
+ *****************************************************************************/
+short RetBit( lenVal*   plv,
+	      int       iByte,
+	      int       iBit )
+{
+	/* assert( ( iByte >= 0 ) && ( iByte < plv->len ) ); */
+	/* assert( ( iBit >= 0 ) && ( iBit < 8 ) ); */
+	return( (short)( ( plv->val[ iByte ] >> ( 7 - iBit ) ) & 0x1 ) );
+}
+
+/*****************************************************************************
+ * Function:     SetBit
+ * Description:  set the (byte, bit) of lv equal to val
+ * Example:      SetBit("00000000",byte, 1) equals "01000000".
+ * Parameters:   plv     - ptr to lenval.
+ *               iByte   - the byte to get the bit from.
+ *               iBit    - the bit number (0=msb).
+ *               sVal    - the bit value to set.
+ * Returns:      void.
+ *****************************************************************************/
+void SetBit( lenVal*    plv,
+	     int        iByte,
+	     int        iBit,
+	     short      sVal )
+{
+	unsigned char   ucByteVal;
+	unsigned char   ucBitMask;
+
+	ucBitMask   = (unsigned char)(1 << ( 7 - iBit ));
+	ucByteVal   = (unsigned char)(plv->val[ iByte ] & (~ucBitMask));
+
+	if ( sVal )
+	{
+		ucByteVal   |= ucBitMask;
+	}
+	plv->val[ iByte ]   = ucByteVal;
+}
+
+/*****************************************************************************
+ * Function:     AddVal
+ * Description:  add val1 to val2 and store in resVal;
+ *               assumes val1 and val2  are of equal length.
+ * Parameters:   plvResVal   - ptr to result.
+ *               plvVal1     - ptr of addendum.
+ *               plvVal2     - ptr of addendum.
+ * Returns:      void.
+ *****************************************************************************/
+void addVal( lenVal*    plvResVal,
+	     lenVal*    plvVal1,
+	     lenVal*    plvVal2 )
+{
+	unsigned char   ucCarry;
+	unsigned short  usSum;
+	unsigned short  usVal1;
+	unsigned short  usVal2;
+	short           sIndex;
+
+	plvResVal->len  = plvVal1->len;         /* set up length of result */
+
+	/* start at least significant bit and add bytes    */
+	ucCarry = 0;
+	sIndex  = plvVal1->len;
+	while ( sIndex-- )
+	{
+		usVal1  = plvVal1->val[ sIndex ];   /* i'th byte of val1 */
+		usVal2  = plvVal2->val[ sIndex ];   /* i'th byte of val2 */
+
+		/* add the two bytes plus carry from previous addition */
+		usSum   = (unsigned short)( usVal1 + usVal2 + ucCarry );
+
+		/* set up carry for next byte */
+		ucCarry = (unsigned char)( ( usSum > 255 ) ? 1 : 0 );
+
+		/* set the i'th byte of the result */
+		plvResVal->val[ sIndex ]    = (unsigned char)usSum;
+	}
+}
+
+/*****************************************************************************
+ * Function:     readVal
+ * Description:  read from XSVF numBytes bytes of data into x.
+ * Parameters:   plv         - ptr to lenval in which to put the bytes read.
+ *               sNumBytes   - the number of bytes to read.
+ * Returns:      void.
+ *****************************************************************************/
+void readVal( lenVal*   plv,
+	      short     sNumBytes )
+{
+	unsigned char*  pucVal;
+
+	plv->len    = sNumBytes;        /* set the length of the lenVal        */
+	for ( pucVal = plv->val; sNumBytes; --sNumBytes, ++pucVal )
+	{
+		/* read a byte of data into the lenVal */
+		readByte( pucVal );
+	}
+}
--- a/board/esd/common/xilinx_jtag/lenval.h
+++ b/board/esd/common/xilinx_jtag/lenval.h
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: lenval.h                                      */
+/* abstract:  This file contains a description of the  */
+/*            data structure "lenval".                 */
+/*******************************************************/
+
+#ifndef lenval_dot_h
+#define lenval_dot_h
+
+/* the lenVal structure is a byte oriented type used to store an */
+/* arbitrary length binary value. As an example, the hex value   */
+/* 0x0e3d is represented as a lenVal with len=2 (since 2 bytes   */
+/* and val[0]=0e and val[1]=3d.  val[2-MAX_LEN] are undefined    */
+
+/* maximum length (in bytes) of value to read in        */
+/* this needs to be at least 4, and longer than the     */
+/* length of the longest SDR instruction.  If there is, */
+/* only 1 device in the chain, MAX_LEN must be at least */
+/* ceil(27/8) == 4.  For 6 devices in a chain, MAX_LEN  */
+/* must be 5, for 14 devices MAX_LEN must be 6, for 20  */
+/* devices MAX_LEN must be 7, etc..                     */
+/* You can safely set MAX_LEN to a smaller number if you*/
+/* know how many devices will be in your chain.         */
+#define MAX_LEN 7000
+
+
+typedef struct var_len_byte
+{
+	short len;   /* number of chars in this value */
+	unsigned char val[MAX_LEN+1];  /* bytes of data */
+} lenVal;
+
+
+/* return the long representation of a lenVal */
+extern long value(lenVal *x);
+
+/* set lenVal equal to value */
+extern void initLenVal(lenVal *x, long value);
+
+/* check if expected equals actual (taking the mask into account) */
+extern short EqualLenVal(lenVal *expected, lenVal *actual, lenVal *mask);
+
+/* add val1+val2 and put the result in resVal */
+extern void addVal(lenVal *resVal, lenVal *val1, lenVal *val2);
+
+/* return the (byte, bit) of lv (reading from left to right) */
+extern short RetBit(lenVal *lv, int byte, int bit);
+
+/* set the (byte, bit) of lv equal to val (e.g. SetBit("00000000",byte, 1)
+   equals "01000000" */
+extern void SetBit(lenVal *lv, int byte, int bit, short val);
+
+/* read from XSVF numBytes bytes of data into x */
+extern void  readVal(lenVal *x, short numBytes);
+
+#endif
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
--- a/board/esd/common/xilinx_jtag/micro.h
+++ b/board/esd/common/xilinx_jtag/micro.h
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*****************************************************************************
+ * File:         micro.h
+ * Description:  This header file contains the function prototype to the
+ *               primary interface function for the XSVF player.
+ * Usage:        FIRST - PORTS.C
+ *               Customize the ports.c function implementations to establish
+ *               the correct protocol for communicating with your JTAG ports
+ *               (setPort() and readTDOBit()) and tune the waitTime() delay
+ *               function.  Also, establish access to the XSVF data source
+ *               in the readByte() function.
+ *               FINALLY - Call xsvfExecute().
+ *****************************************************************************/
+#ifndef XSVF_MICRO_H
+#define XSVF_MICRO_H
+
+/* Legacy error codes for xsvfExecute from original XSVF player v2.0 */
+#define XSVF_LEGACY_SUCCESS 1
+#define XSVF_LEGACY_ERROR   0
+
+/* 4.04 [NEW] Error codes for xsvfExecute. */
+/* Must #define XSVF_SUPPORT_ERRORCODES in micro.c to get these codes */
+#define XSVF_ERROR_NONE         0
+#define XSVF_ERROR_UNKNOWN      1
+#define XSVF_ERROR_TDOMISMATCH  2
+#define XSVF_ERROR_MAXRETRIES   3   /* TDO mismatch after max retries */
+#define XSVF_ERROR_ILLEGALCMD   4
+#define XSVF_ERROR_ILLEGALSTATE 5
+#define XSVF_ERROR_DATAOVERFLOW 6   /* Data > lenVal MAX_LEN buffer size*/
+/* Insert new errors here */
+#define XSVF_ERROR_LAST         7
+
+/*****************************************************************************
+ * Function:     xsvfExecute
+ * Description:  Process, interpret, and apply the XSVF commands.
+ *               See port.c:readByte for source of XSVF data.
+ * Parameters:   none.
+ * Returns:      int - For error codes see above.
+ *****************************************************************************/
+int xsvfExecute(void);
+
+#endif  /* XSVF_MICRO_H */
--- a/board/esd/common/xilinx_jtag/ports.c
+++ b/board/esd/common/xilinx_jtag/ports.c
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: ports.c                                       */
+/* abstract:  This file contains the routines to       */
+/*            output values on the JTAG ports, to read */
+/*            the TDO bit, and to read a byte of data  */
+/*            from the prom                            */
+/*                                                     */
+/*******************************************************/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#include "ports.h"
+
+static unsigned long output = 0;
+static int filepos = 0;
+static int oldstate = 0;
+static int newstate = 0;
+static int readptr = 0;
+
+extern long filesize;
+extern const unsigned char fpgadata[];
+
+
+/* if in debugging mode, then just set the variables */
+void setPort(short p,short val)
+{
+	if (p==TMS) {
+		if (val) {
+			output |= JTAG_TMS;
+		} else {
+			output &= ~JTAG_TMS;
+		}
+	}
+	if (p==TDI) {
+		if (val) {
+			output |= JTAG_TDI;
+		} else {
+			output &= ~JTAG_TDI;
+		}
+	}
+	if (p==TCK) {
+		if (val) {
+			output |= JTAG_TCK;
+		} else {
+			output &= ~JTAG_TCK;
+		}
+		out32(GPIO0_OR, output);
+	}
+}
+
+
+/* toggle tck LH */
+void pulseClock(void)
+{
+	setPort(TCK,0);  /* set the TCK port to low  */
+	setPort(TCK,1);  /* set the TCK port to high */
+}
+
+
+/* read in a byte of data from the prom */
+void readByte(unsigned char *data)
+{
+	/* pretend reading using a file */
+	*data = fpgadata[readptr++];
+	newstate = (100 * filepos++) / filesize;
+	if (newstate != oldstate) {
+		printf("%4d\r\r\r\r", newstate);
+		oldstate = newstate;
+	}
+}
+
+/* read the TDO bit from port */
+unsigned char readTDOBit(void)
+{
+	unsigned long inputs;
+
+	inputs = in32(GPIO0_IR);
+	if (inputs & JTAG_TDO)
+		return 1;
+	else
+		return 0;
+}
+
+
+/* Wait at least the specified number of microsec.                           */
+/* Use a timer if possible; otherwise estimate the number of instructions    */
+/* necessary to be run based on the microcontroller speed.  For this example */
+/* we pulse the TCK port a number of times based on the processor speed.     */
+void waitTime(long microsec)
+{
+	udelay(microsec); /* esd */
+}
--- a/board/esd/common/xilinx_jtag/ports.h
+++ b/board/esd/common/xilinx_jtag/ports.h
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*******************************************************/
+/* file: ports.h                                       */
+/* abstract:  This file contains extern declarations   */
+/*            for providing stimulus to the JTAG ports.*/
+/*******************************************************/
+
+#ifndef ports_dot_h
+#define ports_dot_h
+
+/* these constants are used to send the appropriate ports to setPort */
+/* they should be enumerated types, but some of the microcontroller  */
+/* compilers don't like enumerated types */
+#define TCK (short) 0
+#define TMS (short) 1
+#define TDI (short) 2
+
+/*
+ * Use CFG_FPGA_xxx defines from board include file.
+ */
+#define JTAG_TMS   CFG_FPGA_PRG     /* output */
+#define JTAG_TCK   CFG_FPGA_CLK     /* output */
+#define JTAG_TDI   CFG_FPGA_DATA    /* output */
+#define JTAG_TDO   CFG_FPGA_DONE    /* input */
+
+/* set the port "p" (TCK, TMS, or TDI) to val (0 or 1) */
+void setPort(short p, short val);
+
+/* read the TDO bit and store it in val */
+unsigned char readTDOBit(void);
+
+/* make clock go down->up->down*/
+void pulseClock(void);
+
+/* read the next byte of data from the xsvf file */
+void readByte(unsigned char *data);
+
+void waitTime(long microsec);
+
+#endif
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -433,7 +433,14 @@ int checkboard (void)
 #endif

 	if (ctermm2()) {
-		printf("CTERM-M2 - Id=0x%02x)", *(unsigned char *)0xf0000400);
+		unsigned char str[4];
+
+		/*
+		 * Read board-id and save in env-variable
+		 */
+		sprintf(str, "%d", *(unsigned char *)0xf0000400);
+		setenv("boardid", str);
+		printf("CTERM-M2 - Id=%s)", str);
 	} else {
 		if (cpci405_host()) {
 			puts ("PCI Host Version)");
@@ -508,44 +515,144 @@ void ide_set_reset(int on)
 #endif /* CONFIG_IDE_RESET */
 #endif /* CONFIG_CPCI405_VER2 */

-#if 0 /* test-only */
-/* ------------------------------------------------------------------------- */

-u8 *dhcp_vendorex_prep (u8 * e)
+#ifdef CONFIG_CPCI405AB
+
+#define ONE_WIRE_CLEAR   (*(volatile unsigned short *)0xf0400000 |= 0x0100)
+#define ONE_WIRE_SET     (*(volatile unsigned short *)0xf0400000 &= ~0x0100)
+#define ONE_WIRE_GET     (*(volatile unsigned short *)0xf0400002 & 0x1000)
+
+/*
+ * Generate a 1-wire reset, return 1 if no presence detect was found,
+ * return 0 otherwise.
+ * (NOTE: Does not handle alarm presence from DS2404/DS1994)
+ */
+int OWTouchReset(void)
 {
-	char *ptr;
+	int result;

-/* DHCP vendor-class-identifier = 60 */
-	if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
-		*e++ = 60;
-		*e++ = strlen (ptr);
-		while (*ptr)
-			*e++ = *ptr++;
-	}
-/* my DHCP_CLIENT_IDENTIFIER = 61 */
-	if ((ptr = getenv ("dhcp_client_id"))) {
-		*e++ = 61;
-		*e++ = strlen (ptr);
-		while (*ptr)
-			*e++ = *ptr++;
-	}
+	ONE_WIRE_CLEAR;
+	udelay(480);
+	ONE_WIRE_SET;
+	udelay(70);

-	return e;
+	result = ONE_WIRE_GET;
+
+	udelay(410);
+	return result;
 }


-/* ------------------------------------------------------------------------- */
-
-u8 *dhcp_vendorex_proc (u8 * popt)
+/*
+ * Send 1 a 1-wire write bit.
+ * Provide 10us recovery time.
+ */
+void OWWriteBit(int bit)
 {
-	if (*popt == 61)
-		return (u8 *)-1;
-	if (*popt == 43) {
-		printf("|%s|", popt+4); /* test-only */
-		return (u8 *)-1;
+	if (bit) {
+		/*
+		 * write '1' bit
+		 */
+		ONE_WIRE_CLEAR;
+		udelay(6);
+		ONE_WIRE_SET;
+		udelay(64);
+	} else {
+		/*
+		 * write '0' bit
+		 */
+		ONE_WIRE_CLEAR;
+		udelay(60);
+		ONE_WIRE_SET;
+		udelay(10);
 	}
-	return NULL;
 }

-/* ------------------------------------------------------------------------- */
-#endif /* test-only */
+
+/*
+ * Read a bit from the 1-wire bus and return it.
+ * Provide 10us recovery time.
+ */
+int OWReadBit(void)
+{
+	int result;
+
+	ONE_WIRE_CLEAR;
+	udelay(6);
+	ONE_WIRE_SET;
+	udelay(9);
+
+	result = ONE_WIRE_GET;
+
+	udelay(55);
+	return result;
+}
+
+
+void OWWriteByte(int data)
+{
+	int loop;
+
+	for (loop=0; loop<8; loop++) {
+		OWWriteBit(data & 0x01);
+		data >>= 1;
+	}
+}
+
+
+int OWReadByte(void)
+{
+	int loop, result = 0;
+
+	for (loop=0; loop<8; loop++) {
+		result >>= 1;
+		if (OWReadBit()) {
+			result |= 0x80;
+		}
+	}
+
+	return result;
+}
+
+
+int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	volatile unsigned short val;
+	int result;
+	int i;
+	unsigned char ow_id[6];
+	unsigned char str[32];
+	unsigned char ow_crc;
+
+	/*
+	 * Clear 1-wire bit (open drain with pull-up)
+	 */
+	val = *(volatile unsigned short *)0xf0400000;
+	val &= ~0x1000; /* clear 1-wire bit */
+	*(volatile unsigned short *)0xf0400000 = val;
+
+	result = OWTouchReset();
+	if (result != 0) {
+		puts("No 1-wire device detected!\n");
+	}
+
+	OWWriteByte(0x33); /* send read rom command */
+	OWReadByte(); /* skip family code ( == 0x01) */
+	for (i=0; i<6; i++) {
+		ow_id[i] = OWReadByte();
+	}
+	ow_crc = OWReadByte(); /* read crc */
+
+	sprintf(str, "%08X%04X", *(unsigned int *)&ow_id[0], *(unsigned short *)&ow_id[4]);
+	printf("Setting environment variable 'ow_id' to %s\n", str);
+	setenv("ow_id", str);
+
+	return 0;
+}
+U_BOOT_CMD(
+	onewire,	1,	1,	do_onewire,
+	"onewire - Read 1-write ID\n",
+	NULL
+	);
+
+#endif /* CONFIG_CPCI405AB */
--- a/board/esd/cpci405/fpgadata_cpci405ab.c
+++ b/board/esd/cpci405/fpgadata_cpci405ab.c
--- a/board/esd/dp405/Makefile
+++ b/board/esd/dp405/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+# Objects for Xilinx JTAG programming (CPLD)
+CPLD    = ../common/xilinx_jtag/lenval.o \
+	  ../common/xilinx_jtag/micro.o \
+	  ../common/xilinx_jtag/ports.o
+
+OBJS	= $(BOARD).o flash.o $(CPLD)
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/dp405/config.mk
+++ b/board/esd/dp405/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd VOH405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+
+/* fpga configuration data - not compressed, generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+int filesize = sizeof(fpgadata);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF80);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	/*
+	 * Reset CPLD via GPIO13 (CS4) pin
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(0x80000000 >> 13));
+	udelay(1000); /* wait 1ms */
+	out32(GPIO0_OR, in32(GPIO0_OR) | (0x80000000 >> 13));
+	udelay(1000); /* wait 1ms */
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+	unsigned char trans[16] = {0x0,0x8,0x4,0xc,0x2,0xa,0x6,0xe,
+				   0x1,0x9,0x5,0xd,0x3,0xb,0x7,0xf};
+	unsigned char id1, id2;
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming DP405");
+	} else {
+		puts(str);
+	}
+
+	id1 = trans[(~(in32(GPIO0_IR) >> 5)) & 0x0000000f];
+	id2 = trans[(~(in32(GPIO0_IR) >> 9)) & 0x0000000f];
+	printf(" (ID=0x%1X%1X)\n", id1, id2);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
--- a/board/esd/dp405/flash.c
+++ b/board/esd/dp405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/dp405/fpgadata.c
+++ b/board/esd/dp405/fpgadata.c
--- a/board/esd/dp405/u-boot.lds
+++ b/board/esd/dp405/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/hub405/Makefile
+++ b/board/esd/hub405/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/hub405/config.mk
+++ b/board/esd/hub405/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd HUB405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
--- a/board/esd/hub405/flash.c
+++ b/board/esd/hub405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF9F);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
+	volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4);
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+	*duart2_mcr = 0x08;
+	*duart3_mcr = 0x08;
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming HUB405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif
--- a/board/esd/hub405/u-boot.lds
+++ b/board/esd/hub405/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -107,5 +107,10 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

 	return 0;
 }
+U_BOOT_CMD(
+	loadpci,	1,	1,	do_loadpci,
+	"loadpci - Wait for pci-image and boot it\n",
+	NULL
+);

 #endif
--- a/board/esd/pci405/fpgadata.c
+++ b/board/esd/pci405/fpgadata.c
--- a/board/esd/plu405/Makefile
+++ b/board/esd/plu405/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/plu405/config.mk
+++ b/board/esd/plu405/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd PLU405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000
--- a/board/esd/plu405/flash.c
+++ b/board/esd/plu405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/plu405/fpgadata.c
+++ b/board/esd/plu405/fpgadata.c
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -0,0 +1,268 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF99);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+
+#if 1 /* test-only */
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+#endif
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming PLU405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+	volatile unsigned short *fpga_mode =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+
+	/*
+	 * Assert or deassert CompactFlash Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+	} else {		/* release RESET */
+		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+	}
+}
+#endif /* CONFIG_IDE_RESET */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif
--- a/board/esd/plu405/u-boot.lds
+++ b/board/esd/plu405/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/pmc405/Makefile
+++ b/board/esd/pmc405/Makefile
@@ -25,7 +25,12 @@ include $(TOPDIR)/config.mk

 LIB	= lib$(BOARD).a

-OBJS	= $(BOARD).o strataflash.o
+# Objects for Xilinx JTAG programming (CPLD)
+CPLD    = ../common/xilinx_jtag/lenval.o \
+	  ../common/xilinx_jtag/micro.o \
+	  ../common/xilinx_jtag/ports.o
+
+OBJS	= $(BOARD).o strataflash.o $(CPLD)

 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
--- a/board/esd/pmc405/fpgadata.c
+++ b/board/esd/pmc405/fpgadata.c
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -26,11 +26,13 @@
 #include <command.h>
 #include <malloc.h>

-/* ------------------------------------------------------------------------- */

-
-/* Prototypes */
-int gunzip(void *, int, unsigned char *, int *);
+/* fpga configuration data - not compressed, generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+int filesize = sizeof(fpgadata);


 int board_pre_init (void)
@@ -74,104 +76,6 @@ int misc_init_f (void)

 int misc_init_r (void)
 {
-#if 0 /* test-only */
-	DECLARE_GLOBAL_DATA_PTR;
-	volatile unsigned short *fpga_mode =
-		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
-	volatile unsigned char *duart0_mcr =
-		(unsigned char *)((ulong)DUART0_BA + 4);
-	volatile unsigned char *duart1_mcr =
-		(unsigned char *)((ulong)DUART1_BA + 4);
-	bd_t *bd = gd->bd;
-	char *	tmp;                    /* Temporary char pointer      */
-	unsigned char *dst;
-	ulong len = sizeof(fpgadata);
-	int status;
-	int index;
-	int i;
-	unsigned long cntrl0Reg;
-
-	/*
-	 * Setup GPIO pins (CS6+CS7 as GPIO)
-	 */
-	cntrl0Reg = mfdcr(cntrl0);
-	mtdcr(cntrl0, cntrl0Reg | 0x00300000);
-
-	dst = malloc(CFG_FPGA_MAX_SIZE);
-	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
-		printf ("GUNZIP ERROR - must RESET board to recover\n");
-		do_reset (NULL, 0, 0, NULL);
-	}
-
-	status = fpga_boot(dst, len);
-	if (status != 0) {
-		printf("\nFPGA: Booting failed ");
-		switch (status) {
-		case ERROR_FPGA_PRG_INIT_LOW:
-			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_INIT_HIGH:
-			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-			break;
-		case ERROR_FPGA_PRG_DONE:
-			printf("(Timeout: DONE not high after programming FPGA)\n ");
-			break;
-		}
-
-		/* display infos on fpgaimage */
-		index = 15;
-		for (i=0; i<4; i++) {
-			len = dst[index];
-			printf("FPGA: %s\n", &(dst[index+1]));
-			index += len+3;
-		}
-		putc ('\n');
-		/* delayed reboot */
-		for (i=20; i>0; i--) {
-			printf("Rebooting in %2d seconds \r",i);
-			for (index=0;index<1000;index++)
-				udelay(1000);
-		}
-		putc ('\n');
-		do_reset(NULL, 0, 0, NULL);
-	}
-
-	/* restore gpio/cs settings */
-	mtdcr(cntrl0, cntrl0Reg);
-
-	puts("FPGA:  ");
-
-	/* display infos on fpgaimage */
-	index = 15;
-	for (i=0; i<4; i++) {
-		len = dst[index];
-		printf("%s ", &(dst[index+1]));
-		index += len+3;
-	}
-	putc ('\n');
-
-	free(dst);
-
-	/*
-	 * Reset FPGA via FPGA_DATA pin
-	 */
-	SET_FPGA(FPGA_PRG | FPGA_CLK);
-	udelay(1000); /* wait 1ms */
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
-	udelay(1000); /* wait 1ms */
-
-	/*
-	 * Enable power on PS/2 interface
-	 */
-	*fpga_mode |= CFG_FPGA_CTRL_PS2_RESET;
-
-	/*
-	 * Enable interrupts in exar duart mcr[3]
-	 */
-	*duart0_mcr = 0x08;
-	*duart1_mcr = 0x08;
-#endif
-
 	return (0);
 }

@@ -188,7 +92,7 @@ int checkboard (void)
 	puts ("Board: ");

 	if (i == -1) {
-		puts ("### No HW ID - assuming ABG405");
+		puts ("### No HW ID - assuming PMC405");
 	} else {
 		puts(str);
 	}
--- a/board/esd/voh405/Makefile
+++ b/board/esd/voh405/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/esd/voh405/config.mk
+++ b/board/esd/voh405/config.mk
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd VOH405 boards
+#
+
+TEXT_BASE = 0xFFFC0000
+#TEXT_BASE = 0x00FC0000
--- a/board/esd/voh405/flash.c
+++ b/board/esd/voh405/flash.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0;
+	int i;
+	uint pbcr;
+	unsigned long base_b0;
+	int size_val = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
+
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
+	switch (size_b0) {
+	case 1 << 20:
+		size_val = 0;
+		break;
+	case 2 << 20:
+		size_val = 1;
+		break;
+	case 4 << 20:
+		size_val = 2;
+		break;
+	case 8 << 20:
+		size_val = 3;
+		break;
+	case 16 << 20:
+		size_val = 4;
+		break;
+	}
+	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
+	mtdcr(ebccfgd, pbcr);
+
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
--- a/board/esd/voh405/fpgadata.c
+++ b/board/esd/voh405/fpgadata.c
--- a/board/esd/voh405/u-boot.lds
+++ b/board/esd/voh405/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -0,0 +1,273 @@
+/*
+ * (C) Copyright 2001-2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include <malloc.h>
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+#define FPGA_DEBUG
+#endif
+
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+/* fpga configuration data - gzip compressed and generated by bin2c */
+const unsigned char fpgadata[] =
+{
+#include "fpgadata.c"
+};
+
+/*
+ * include common fpga code (for esd boards)
+ */
+#include "../common/fpga.c"
+
+
+/* Prototypes */
+int gunzip(void *, int, unsigned char *, int *);
+
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFFB5);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
+	 */
+	mtebc (epcr, 0xa8400000); /* ebc always driven */
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;  /* dummy implementation */
+}
+
+
+int misc_init_r (void)
+{
+	volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
+	volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
+	volatile unsigned short *lcd_reg =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL + 4);
+	unsigned char *dst;
+	ulong len = sizeof(fpgadata);
+	int status;
+	int index;
+	int i;
+
+	dst = malloc(CFG_FPGA_MAX_SIZE);
+	if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+		printf ("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset (NULL, 0, 0, NULL);
+	}
+
+	status = fpga_boot(dst, len);
+	if (status != 0) {
+		printf("\nFPGA: Booting failed ");
+		switch (status) {
+		case ERROR_FPGA_PRG_INIT_LOW:
+			printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_INIT_HIGH:
+			printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
+			break;
+		case ERROR_FPGA_PRG_DONE:
+			printf("(Timeout: DONE not high after programming FPGA)\n ");
+			break;
+		}
+
+		/* display infos on fpgaimage */
+		index = 15;
+		for (i=0; i<4; i++) {
+			len = dst[index];
+			printf("FPGA: %s\n", &(dst[index+1]));
+			index += len+3;
+		}
+		putc ('\n');
+		/* delayed reboot */
+		for (i=20; i>0; i--) {
+			printf("Rebooting in %2d seconds \r",i);
+			for (index=0;index<1000;index++)
+				udelay(1000);
+		}
+		putc ('\n');
+		do_reset(NULL, 0, 0, NULL);
+	}
+
+	puts("FPGA:  ");
+
+	/* display infos on fpgaimage */
+	index = 15;
+	for (i=0; i<4; i++) {
+		len = dst[index];
+		printf("%s ", &(dst[index+1]));
+		index += len+3;
+	}
+	putc ('\n');
+
+	free(dst);
+
+	/*
+	 * Reset FPGA via FPGA_DATA pin
+	 */
+	SET_FPGA(FPGA_PRG | FPGA_CLK);
+	udelay(1000); /* wait 1ms */
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Reset external DUARTs
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+	udelay(10); /* wait 10us */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+	udelay(1000); /* wait 1ms */
+
+	/*
+	 * Set NAND-FLASH GPIO signals to default
+	 */
+	out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
+	out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
+
+	/*
+	 * Enable interrupts in exar duart mcr[3]
+	 */
+	*duart0_mcr = 0x08;
+	*duart1_mcr = 0x08;
+
+	/*
+	 * Set default contrast voltage on epson vga controller
+	 */
+	*lcd_reg = 0x4848;
+
+	return (0);
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof(str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+		puts ("### No HW ID - assuming VOH405");
+	} else {
+		puts(str);
+	}
+
+	putc ('\n');
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr(memcfga, mem_mb0cf);
+	val = mfdcr(memcfgd);
+
+#if 0
+	printf("\nmb0cf=%x\n", val); /* test-only */
+	printf("strap=%x\n", mfdcr(strap)); /* test-only */
+#endif
+
+	return (4*1024*1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_IDE_RESET
+void ide_set_reset(int on)
+{
+	volatile unsigned short *fpga_mode =
+		(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
+
+	/*
+	 * Assert or deassert CompactFlash Reset Pin
+	 */
+	if (on) {		/* assert RESET */
+		*fpga_mode &= ~(CFG_FPGA_CTRL_CF_RESET);
+	} else {		/* release RESET */
+		*fpga_mode |= CFG_FPGA_CTRL_CF_RESET;
+	}
+}
+#endif /* CONFIG_IDE_RESET */
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+void nand_init(void)
+{
+	nand_probe(CFG_NAND_BASE);
+	if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+	}
+}
+#endif
--- a/board/etin/debris/Makefile
+++ b/board/etin/debris/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS =  $(BOARD).o flash.o phantom.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- a/board/etin/debris/config.mk
+++ b/board/etin/debris/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2000, 2001
+# Sangmoon, Etin Systems, dogoil@etinsys.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Debris boards
+#
+
+#TEXT_BASE = 0x00090000
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
--- a/board/etin/debris/debris.c
+++ b/board/etin/debris/debris.c
@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2000
+ * Sangmoon Kim, Etin Systems. dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <pci.h>
+
+int checkboard (void)
+{
+	/*TODO: Check processor type */
+
+	puts (	"Board: Debris "
+#ifdef CONFIG_MPC8240
+		"8240"
+#endif
+#ifdef CONFIG_MPC8245
+		"8245"
+#endif
+		" ##Test not implemented yet##\n");
+	return 0;
+}
+
+#if 0 	/* NOT USED */
+int checkflash (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("## Test not implemented yet ##\n");
+
+	return (0);
+}
+#endif
+
+long int initdram (int board_type)
+{
+	int		 i, cnt;
+	volatile uchar * base= CFG_SDRAM_BASE;
+	volatile ulong * addr;
+	ulong		 save[32];
+	ulong		 val, ret  = 0;
+
+	for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
+		addr = (volatile ulong *)base + cnt;
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	addr = (volatile ulong *)base;
+	save[i] = *addr;
+	*addr = 0;
+
+	if (*addr != 0) {
+		*addr = save[i];
+		goto Done;
+	}
+
+	for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
+		addr = (volatile ulong *)base + cnt;
+		val = *addr;
+		*addr = save[--i];
+		if (val != ~cnt) {
+/*			ulong new_bank0_end = cnt * sizeof(long) - 1;
+			ulong mear1  = mpc824x_mpc107_getreg(MEAR1);
+			ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
+			mear1 =  (mear1  & 0xFFFFFF00) |
+			((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+			emear1 = (emear1 & 0xFFFFFF00) |
+			((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
+			mpc824x_mpc107_setreg(MEAR1,  mear1);
+			mpc824x_mpc107_setreg(EMEAR1, emear1);*/
+
+			ret = cnt * sizeof(long);
+			goto Done;
+		}
+	}
+
+	ret = CFG_MAX_RAM_SIZE;
+Done:
+	return ret;
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_debris_config_table[] = {
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+				       PCI_ENET0_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
+	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
+				       PCI_ENET1_MEMADDR,
+				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+	{ }
+};
+#endif
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+	config_table: pci_debris_config_table,
+#endif
+};
+
+void pci_init_board(void)
+{
+	pci_mpc824x_init(&hose);
+}
+
+void *nvram_read(void *dest, const long src, size_t count)
+{
+	volatile uchar *d = (volatile uchar*) dest;
+	volatile uchar *s = (volatile uchar*) src;
+	while(count--) {
+		*d++ = *s++;
+		asm volatile("sync");
+	}
+	return dest;
+}
+
+void nvram_write(long dest, const void *src, size_t count)
+{
+	volatile uchar *d = (volatile uchar*)dest;
+	volatile uchar *s = (volatile uchar*)src;
+	while(count--) {
+		*d++ = *s++;
+		asm volatile("sync");
+	}
+}
+
+int misc_init_r(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Write ethernet addr in NVRAM for VxWorks */
+	nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS,
+			(char*)&gd->bd->bi_enetaddr[0], 6);
+	return 0;
+}
--- a/board/etin/debris/flash.c
+++ b/board/etin/debris/flash.c
@@ -0,0 +1,720 @@
+/*
+ * board/eva/flash.c
+ *
+ * (C) Copyright 2002
+ * Sangmoon Kim, Etin Systems, dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/pci_io.h>
+#include <mpc824x.h>
+
+int (*do_flash_erase)(flash_info_t*, uint32_t, uint32_t);
+int (*write_dword)(flash_info_t*, ulong, uint64_t);
+
+typedef uint64_t cfi_word;
+
+#define cfi_read(flash, addr) *((volatile cfi_word*)(flash->start[0] + addr))
+
+#define cfi_write(flash, val, addr) \
+	move64((cfi_word*)&val, \
+			(cfi_word*)(flash->start[0] + addr))
+
+#define CMD(x) ((((cfi_word)x)<<48)|(((cfi_word)x)<<32)|(((cfi_word)x)<<16)|(((cfi_word)x)))
+
+static void write32(unsigned long addr, uint32_t value)
+{
+	*(volatile uint32_t*)(addr) = value;
+	asm volatile("sync");
+}
+
+static uint32_t read32(unsigned long addr)
+{
+	uint32_t value;
+	value = *(volatile uint32_t*)addr;
+	asm volatile("sync");
+	return value;
+}
+
+static cfi_word cfi_cmd(flash_info_t *flash, uint8_t cmd, uint32_t addr)
+{
+	uint32_t base = flash->start[0];
+	uint32_t val=(cmd << 16) | cmd;
+	addr <<= 3;
+	write32(base + addr, val);
+	return addr;
+}
+
+static uint16_t cfi_read_query(flash_info_t *flash, uint32_t addr)
+{
+	uint32_t base = flash->start[0];
+	addr <<= 3;
+	return (uint16_t)read32(base + addr);
+}
+
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static void move64(uint64_t *src, uint64_t *dest)
+{
+	asm volatile("lfd  0, 0(3)\n\t" /* fpr0   =  *scr       */
+	 "stfd 0, 0(4)"         /* *dest  =  fpr0       */
+	 : : : "fr0" );         /* Clobbers fr0         */
+	return;
+}
+
+static int cfi_write_dword(flash_info_t *flash, ulong dest, cfi_word data)
+{
+	unsigned long start;
+	cfi_word status = 0;
+
+	status = cfi_read(flash, dest);
+	data &= status;
+
+	cfi_cmd(flash, 0x40, 0);
+	cfi_write(flash, data, dest);
+
+	udelay(10);
+	start = get_timer (0);
+	for(;;) {
+		status = cfi_read(flash, dest);
+		status &= CMD(0x80);
+		if(status == CMD(0x80))
+			break;
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			cfi_cmd(flash, 0xff, 0);
+			return 1;
+		}
+		udelay(1);
+	}
+	cfi_cmd(flash, 0xff, 0);
+
+	return 0;
+}
+
+static int jedec_write_dword (flash_info_t *flash, ulong dest, cfi_word data)
+{
+	ulong start;
+	cfi_word status = 0;
+
+	status = cfi_read(flash, dest);
+	if(status != CMD(0xffff)) return 2;
+
+	cfi_cmd(flash, 0xaa, 0x555);
+	cfi_cmd(flash, 0x55, 0x2aa);
+	cfi_cmd(flash, 0xa0, 0x555);
+
+	cfi_write(flash, data, dest);
+
+	udelay(10);
+	start = get_timer (0);
+	status = ~data;
+	while(status != data) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+			return 1;
+		status = cfi_read(flash, dest);
+		udelay(1);
+	}
+	return 0;
+}
+
+static __inline__ unsigned long get_msr(void)
+{
+	unsigned long msr;
+	__asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+	return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+	__asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
+
+int write_buff (flash_info_t *flash, uchar *src, ulong addr, ulong cnt)
+{
+	ulong wp;
+	int i, s, l, rc;
+	cfi_word data;
+	uint8_t *t = (uint8_t*)&data;
+	unsigned long base = flash->start[0];
+	uint32_t msr;
+
+	if (flash->flash_id == FLASH_UNKNOWN)
+		return 4;
+
+	if (cnt == 0)
+		return 0;
+
+	addr -= base;
+
+	msr = get_msr();
+	set_msr(msr|MSR_FP);
+
+	wp = (addr & ~7);   /* get lower word aligned address */
+
+	if((addr-wp) != 0) {
+		data = cfi_read(flash, wp);
+		s = addr & 7;
+		l = ( cnt < (8-s) ) ? cnt : (8-s);
+		for(i = 0; i < l; i++)
+			t[s+i] = *src++;
+		if ((rc = write_dword(flash, wp, data)) != 0)
+			goto DONE;
+		wp += 8;
+		cnt -= l;
+	}
+
+	while (cnt >= 8) {
+		for (i = 0; i < 8; i++)
+			t[i] = *src++;
+		if ((rc = write_dword(flash, wp, data)) != 0)
+			goto DONE;
+		wp  += 8;
+		cnt -= 8;
+	}
+
+	if (cnt == 0) {
+		rc = 0;
+		goto DONE;
+	}
+
+	data = cfi_read(flash, wp);
+	for(i = 0; i < cnt; i++)
+		t[i] = *src++;
+	rc = write_dword(flash, wp, data);
+DONE:
+	set_msr(msr);
+	return rc;
+}
+
+static int cfi_erase_oneblock(flash_info_t *flash, uint32_t sect)
+{
+	int sa;
+	int flag;
+	ulong start, last, now;
+	cfi_word status;
+
+	flag = disable_interrupts();
+
+	sa = (flash->start[sect] - flash->start[0]);
+	write32(flash->start[sect], 0x00200020);
+	write32(flash->start[sect], 0x00d000d0);
+
+	if (flag)
+		enable_interrupts();
+
+	udelay(1000);
+	start = get_timer (0);
+	last  = start;
+
+	for (;;) {
+		status = cfi_read(flash, sa);
+		status &= CMD(0x80);
+		if (status == CMD(0x80))
+			break;
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			cfi_cmd(flash, 0xff, 0);
+			printf ("Timeout\n");
+			return ERR_TIMOUT;
+		}
+
+		if ((now - last) > 1000) {
+			serial_putc ('.');
+			last = now;
+		}
+		udelay(10);
+	}
+	cfi_cmd(flash, 0xff, 0);
+	return ERR_OK;
+}
+
+static int cfi_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
+{
+	int sect;
+	int rc = ERR_OK;
+
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (flash->protect[sect] == 0) {
+			rc = cfi_erase_oneblock(flash, sect);
+			if (rc != ERR_OK) break;
+		}
+	}
+	printf (" done\n");
+	return rc;
+}
+
+static int jedec_erase(flash_info_t *flash, uint32_t s_first, uint32_t s_last)
+{
+	int sect;
+	cfi_word status;
+	int sa = -1;
+	int flag;
+	ulong start, last, now;
+
+	flag = disable_interrupts();
+
+	cfi_cmd(flash, 0xaa, 0x555);
+	cfi_cmd(flash, 0x55, 0x2aa);
+	cfi_cmd(flash, 0x80, 0x555);
+	cfi_cmd(flash, 0xaa, 0x555);
+	cfi_cmd(flash, 0x55, 0x2aa);
+	for ( sect = s_first; sect <= s_last; sect++) {
+		if (flash->protect[sect] == 0) {
+			sa = flash->start[sect] - flash->start[0];
+			write32(flash->start[sect], 0x00300030);
+		}
+	}
+	if (flag)
+		enable_interrupts();
+
+	if (sa < 0)
+		goto DONE;
+
+	udelay (1000);
+	start = get_timer (0);
+	last  = start;
+	for(;;) {
+		status = cfi_read(flash, sa);
+		if (status == CMD(0xffff))
+			break;
+
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return ERR_TIMOUT;
+		}
+
+		if ((now - last) > 1000) {
+			serial_putc ('.');
+			last = now;
+		}
+		udelay(10);
+	}
+DONE:
+	cfi_cmd(flash, 0xf0, 0);
+
+	printf (" done\n");
+
+	return ERR_OK;
+}
+
+int flash_erase (flash_info_t *flash, int s_first, int s_last)
+{
+	int sect;
+	int prot;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (flash->flash_id == FLASH_UNKNOWN)
+			printf ("- missing\n");
+		else
+			printf ("- no sectors to erase\n");
+		return ERR_NOT_ERASED;
+	}
+	if (flash->flash_id == FLASH_UNKNOWN) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return ERR_NOT_ERASED;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; sect++)
+		if (flash->protect[sect]) prot++;
+
+	if (prot)
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+					                        prot);
+	else
+		printf ("\n");
+
+	return do_flash_erase(flash, s_first, s_last);
+}
+
+struct jedec_flash_info {
+	const uint16_t mfr_id;
+	const uint16_t dev_id;
+	const char *name;
+	const int DevSize;
+	const int InterfaceDesc;
+	const int NumEraseRegions;
+	const ulong regions[4];
+};
+
+#define ERASEINFO(size,blocks) (size<<8)|(blocks-1)
+
+#define SIZE_1MiB 20
+#define SIZE_2MiB 21
+#define SIZE_4MiB 22
+
+static const struct jedec_flash_info jedec_table[] = {
+	{
+		mfr_id: (uint16_t)AMD_MANUFACT,
+		dev_id: (uint16_t)AMD_ID_LV800T,
+		name: "AMD AM29LV800T",
+		DevSize: SIZE_1MiB,
+		NumEraseRegions: 4,
+		regions: {ERASEINFO(0x10000,15),
+			  ERASEINFO(0x08000,1),
+			  ERASEINFO(0x02000,2),
+			  ERASEINFO(0x04000,1)
+		}
+	}, {
+		mfr_id: (uint16_t)AMD_MANUFACT,
+		dev_id: (uint16_t)AMD_ID_LV800B,
+		name: "AMD AM29LV800B",
+		DevSize: SIZE_1MiB,
+		NumEraseRegions: 4,
+		regions: {ERASEINFO(0x10000,15),
+		          ERASEINFO(0x08000,1),
+			  ERASEINFO(0x02000,2),
+			  ERASEINFO(0x04000,1)
+		}
+	}, {
+		mfr_id: (uint16_t)AMD_MANUFACT,
+		dev_id: (uint16_t)AMD_ID_LV160T,
+		name: "AMD AM29LV160T",
+		DevSize: SIZE_2MiB,
+		NumEraseRegions: 4,
+		regions: {ERASEINFO(0x10000,31),
+		          ERASEINFO(0x08000,1),
+			  ERASEINFO(0x02000,2),
+			  ERASEINFO(0x04000,1)
+		}
+	}, {
+		mfr_id: (uint16_t)AMD_MANUFACT,
+		dev_id: (uint16_t)AMD_ID_LV160B,
+		name: "AMD AM29LV160B",
+		DevSize: SIZE_2MiB,
+		NumEraseRegions: 4,
+		regions: {ERASEINFO(0x04000,1),
+		          ERASEINFO(0x02000,2),
+			  ERASEINFO(0x08000,1),
+			  ERASEINFO(0x10000,31)
+		}
+	}, {
+		mfr_id: (uint16_t)AMD_MANUFACT,
+		dev_id: (uint16_t)AMD_ID_LV320T,
+		name: "AMD AM29LV320T",
+		DevSize: SIZE_4MiB,
+		NumEraseRegions: 2,
+		regions: {ERASEINFO(0x10000,63),
+		          ERASEINFO(0x02000,8)
+		}
+
+	}, {
+		mfr_id: (uint16_t)AMD_MANUFACT,
+		dev_id: (uint16_t)AMD_ID_LV320B,
+		name: "AMD AM29LV320B",
+		DevSize: SIZE_4MiB,
+		NumEraseRegions: 2,
+		regions: {ERASEINFO(0x02000,8),
+		          ERASEINFO(0x10000,63)
+		}
+	}
+};
+
+static ulong cfi_init(uint32_t base,  flash_info_t *flash)
+{
+	int sector;
+	int block;
+	int block_count;
+	int offset = 0;
+	int reverse = 0;
+	int primary;
+	int mfr_id;
+	int dev_id;
+
+	flash->start[0] = base;
+	cfi_cmd(flash, 0xF0, 0);
+	cfi_cmd(flash, 0x98, 0);
+	if ( !( cfi_read_query(flash, 0x10) == 'Q' &&
+		cfi_read_query(flash, 0x11) == 'R' &&
+		cfi_read_query(flash, 0x12) == 'Y' )) {
+		cfi_cmd(flash, 0xff, 0);
+		return 0;
+	}
+
+	flash->size = 1 << cfi_read_query(flash, 0x27);
+	flash->size *= 4;
+	block_count = cfi_read_query(flash, 0x2c);
+	primary = cfi_read_query(flash, 0x15);
+	if ( cfi_read_query(flash, primary + 4) == 0x30)
+		reverse = (cfi_read_query(flash, 0x1) & 0x01);
+	else
+		reverse = (cfi_read_query(flash, primary+15) == 3);
+
+	flash->sector_count = 0;
+
+	for ( block = reverse ? block_count - 1	: 0;
+		      reverse ? block >= 0	: block < block_count;
+		      reverse ? block--		: block ++) {
+		int sector_size =
+			(cfi_read_query(flash, 0x2d + block*4+2) |
+			(cfi_read_query(flash, 0x2d + block*4+3) << 8)) << 8;
+		int sector_count =
+			(cfi_read_query(flash, 0x2d + block*4+0) |
+			(cfi_read_query(flash, 0x2d + block*4+1) << 8)) + 1;
+		for(sector = 0; sector < sector_count; sector++) {
+			flash->start[flash->sector_count++] = base + offset;
+			offset += sector_size * 4;
+		}
+	}
+	mfr_id = cfi_read_query(flash, 0x00);
+	dev_id = cfi_read_query(flash, 0x01);
+
+	cfi_cmd(flash, 0xff, 0);
+
+	flash->flash_id = (mfr_id << 16) | dev_id;
+
+	for (sector = 0; sector < flash->sector_count; sector++) {
+		write32(flash->start[sector], 0x00600060);
+		write32(flash->start[sector], 0x00d000d0);
+	}
+	cfi_cmd(flash, 0xff, 0);
+
+	for (sector = 0; sector < flash->sector_count; sector++)
+		flash->protect[sector] = 0;
+
+	do_flash_erase = cfi_erase;
+	write_dword = cfi_write_dword;
+
+	return flash->size;
+}
+
+static ulong jedec_init(unsigned long base, flash_info_t *flash)
+{
+	int i;
+	int block, block_count;
+	int sector, offset;
+	int mfr_id, dev_id;
+	flash->start[0] = base;
+	cfi_cmd(flash, 0xF0, 0x000);
+	cfi_cmd(flash, 0xAA, 0x555);
+	cfi_cmd(flash, 0x55, 0x2AA);
+	cfi_cmd(flash, 0x90, 0x555);
+	mfr_id = cfi_read_query(flash, 0x000);
+	dev_id = cfi_read_query(flash, 0x0001);
+	cfi_cmd(flash, 0xf0, 0x000);
+
+	for(i=0; i<sizeof(jedec_table)/sizeof(struct jedec_flash_info); i++) {
+		if((jedec_table[i].mfr_id == mfr_id) &&
+			(jedec_table[i].dev_id == dev_id)) {
+
+			flash->flash_id = (mfr_id << 16) | dev_id;
+			flash->size = 1 << jedec_table[0].DevSize;
+			flash->size *= 4;
+			block_count = jedec_table[i].NumEraseRegions;
+			offset = 0;
+			flash->sector_count = 0;
+			for (block = 0; block < block_count; block++) {
+				int sector_size = jedec_table[i].regions[block];
+				int sector_count = (sector_size & 0xff) + 1;
+				sector_size >>= 8;
+				for (sector=0; sector<sector_count; sector++) {
+					flash->start[flash->sector_count++] =
+						base + offset;
+					offset += sector_size * 4;
+				}
+			}
+			break;
+		}
+	}
+
+	for (sector = 0; sector < flash->sector_count; sector++)
+		flash->protect[sector] = 0;
+
+	do_flash_erase = jedec_erase;
+	write_dword = jedec_write_dword;
+
+	return flash->size;
+}
+
+inline void mtibat1u(unsigned int x)
+{
+	__asm__ __volatile__ ("mtspr   530, %0" :: "r" (x));
+}
+
+inline void mtibat1l(unsigned int x)
+{
+	__asm__ __volatile__ ("mtspr   531, %0" :: "r" (x));
+}
+
+inline void mtdbat1u(unsigned int x)
+{
+	__asm__ __volatile__ ("mtspr   538, %0" :: "r" (x));
+}
+
+inline void mtdbat1l(unsigned int x)
+{
+	__asm__ __volatile__ ("mtspr   539, %0" :: "r" (x));
+}
+
+unsigned long flash_init (void)
+{
+	unsigned long size = 0;
+	int i;
+	unsigned int msr;
+
+	/* BAT1 */
+	CONFIG_WRITE_WORD(ERCR3, 0x0C00000C);
+	CONFIG_WRITE_WORD(ERCR4, 0x0800000C);
+	msr = get_msr();
+	set_msr(msr & ~(MSR_IR | MSR_DR));
+	mtibat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
+	mtibat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
+	mtdbat1l(0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
+	mtdbat1u(0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
+	set_msr(msr);
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	size = cfi_init(FLASH_BASE0_PRELIM, &flash_info[0]);
+	if (!size)
+		size = jedec_init(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN)
+		printf ("# Unknown FLASH on Bank 1 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+
+	return size;
+}
+
+void flash_print_info  (flash_info_t *flash)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *p;
+
+	if (flash->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		flash_init();
+	}
+
+	if (flash->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (((flash->flash_id) >> 16) & 0xff) {
+	case 0x01:
+		printf ("AMD ");
+		break;
+	case 0x04:
+		printf("FUJITSU ");
+		break;
+	case 0x20:
+		printf("STM ");
+		break;
+	case 0xBF:
+		printf("SST ");
+		break;
+	case 0x89:
+	case 0xB0:
+		printf("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch ((flash->flash_id) & 0xffff) {
+	case (uint16_t)AMD_ID_LV800T:
+		printf ("AM29LV800T\n");
+		break;
+	case (uint16_t)AMD_ID_LV800B:
+		printf ("AM29LV800B\n");
+		break;
+	case (uint16_t)AMD_ID_LV160T:
+		printf ("AM29LV160T\n");
+		break;
+	case (uint16_t)AMD_ID_LV160B:
+		printf ("AM29LV160B\n");
+		break;
+	case (uint16_t)AMD_ID_LV320T:
+		printf ("AM29LV320T\n");
+		break;
+	case (uint16_t)AMD_ID_LV320B:
+		printf ("AM29LV320B\n");
+		break;
+	case (uint16_t)INTEL_ID_28F800C3T:
+		printf ("28F800C3T\n");
+		break;
+	case (uint16_t)INTEL_ID_28F800C3B:
+		printf ("28F800C3B\n");
+		break;
+	case (uint16_t)INTEL_ID_28F160C3T:
+		printf ("28F160C3T\n");
+		break;
+	case (uint16_t)INTEL_ID_28F160C3B:
+		printf ("28F160C3B\n");
+		break;
+	case (uint16_t)INTEL_ID_28F320C3T:
+		printf ("28F320C3T\n");
+		break;
+	case (uint16_t)INTEL_ID_28F320C3B:
+		printf ("28F320C3B\n");
+		break;
+	case (uint16_t)INTEL_ID_28F640C3T:
+		printf ("28F640C3T\n");
+		break;
+	case (uint16_t)INTEL_ID_28F640C3B:
+		printf ("28F640C3B\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	if (flash->size >= (1 << 20)) {
+		printf ("  Size: %ld MB in %d Sectors\n",
+				flash->size >> 20, flash->sector_count);
+	} else {
+		printf ("  Size: %ld kB in %d Sectors\n",
+				flash->size >> 10, flash->sector_count);
+	}
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < flash->sector_count; ++i) {
+		/* Check if whole sector is erased*/
+		if (i != (flash->sector_count-1))
+			size = flash->start[i+1] - flash->start[i];
+		else
+			size = flash->start[0] + flash->size - flash->start[i];
+
+		erased = 1;
+		p = (volatile unsigned long *)flash->start[i];
+		size = size >> 2;        /* divide by 4 for longword access */
+		for (k=0; k<size; k++) {
+			if (*p++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf ("\n   ");
+
+		printf (" %08lX%s%s",
+			flash->start[i],
+			erased ? " E" : "  ",
+			flash->protect[i] ? "RO " : "   ");
+	}
+	printf ("\n");
+}
--- a/board/etin/debris/phantom.c
+++ b/board/etin/debris/phantom.c
@@ -0,0 +1,310 @@
+/*
+ * board/eva/phantom.c
+ *
+ * Phantom RTC device driver for EVA
+ *
+ * Author: Sangmoon Kim
+ *         dogoil@etinsys.com
+ *
+ * Copyright 2002 Etinsys Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+#define RTC_BASE (CFG_NVRAM_BASE_ADDR + 0x7fff8)
+
+#define RTC_YEAR                ( RTC_BASE + 7 )
+#define RTC_MONTH               ( RTC_BASE + 6 )
+#define RTC_DAY_OF_MONTH        ( RTC_BASE + 5 )
+#define RTC_DAY_OF_WEEK         ( RTC_BASE + 4 )
+#define RTC_HOURS               ( RTC_BASE + 3 )
+#define RTC_MINUTES             ( RTC_BASE + 2 )
+#define RTC_SECONDS             ( RTC_BASE + 1 )
+#define RTC_CENTURY             ( RTC_BASE + 0 )
+
+#define RTC_CONTROLA            RTC_CENTURY
+#define RTC_CONTROLB            RTC_SECONDS
+#define RTC_CONTROLC            RTC_DAY_OF_WEEK
+
+#define RTC_CA_WRITE            0x80
+#define RTC_CA_READ             0x40
+
+#define RTC_CB_OSC_DISABLE      0x80
+
+#define RTC_CC_BATTERY_FLAG     0x80
+#define RTC_CC_FREQ_TEST        0x40
+
+
+static int phantom_flag = -1;
+static int century_flag = -1;
+
+static uchar rtc_read(unsigned int addr)
+{
+	return *(volatile unsigned char *)(addr);
+}
+
+static void rtc_write(unsigned int addr, uchar val)
+{
+	*(volatile unsigned char *)(addr) = val;
+}
+
+static unsigned char phantom_rtc_sequence[] = {
+	0xc5, 0x3a, 0xa3, 0x5c, 0xc5, 0x3a, 0xa3, 0x5c
+};
+
+static unsigned char* phantom_rtc_read(int addr, unsigned char rtc[8])
+{
+	int i, j;
+	unsigned char v;
+	unsigned char save = rtc_read(addr);
+
+	for (j = 0; j < 8; j++) {
+		v = phantom_rtc_sequence[j];
+		for (i = 0; i < 8; i++) {
+			rtc_write(addr, v & 1);
+			v >>= 1;
+		}
+	}
+	for (j = 0; j < 8; j++) {
+		v = 0;
+		for (i = 0; i < 8; i++) {
+			if(rtc_read(addr) & 1)
+				v |= 1 << i;
+		}
+		rtc[j] = v;
+	}
+	rtc_write(addr, save);
+	return rtc;
+}
+
+static void phantom_rtc_write(int addr, unsigned char rtc[8])
+{
+	int i, j;
+	unsigned char v;
+	unsigned char save = rtc_read(addr);
+	for (j = 0; j < 8; j++) {
+		v = phantom_rtc_sequence[j];
+		for (i = 0; i < 8; i++) {
+			rtc_write(addr, v & 1);
+			v >>= 1;
+		}
+	}
+	for (j = 0; j < 8; j++) {
+		v = rtc[j];
+		for (i = 0; i < 8; i++) {
+			rtc_write(addr, v & 1);
+			v >>= 1;
+		}
+	}
+	rtc_write(addr, save);
+}
+
+static int get_phantom_flag(void)
+{
+	int i;
+	unsigned char rtc[8];
+
+	phantom_rtc_read(RTC_BASE, rtc);
+
+	for(i = 1; i < 8; i++) {
+		if (rtc[i] != rtc[0])
+			return 1;
+	}
+	return 0;
+}
+
+void rtc_reset(void)
+{
+	if (phantom_flag < 0)
+		phantom_flag = get_phantom_flag();
+
+	if (phantom_flag) {
+		unsigned char rtc[8];
+		phantom_rtc_read(RTC_BASE, rtc);
+		if(rtc[4] & 0x30) {
+			printf( "real-time-clock was stopped. Now starting...\n" );
+			rtc[4] &= 0x07;
+			phantom_rtc_write(RTC_BASE, rtc);
+		}
+	} else {
+		uchar reg_a, reg_b, reg_c;
+		reg_a = rtc_read( RTC_CONTROLA );
+		reg_b = rtc_read( RTC_CONTROLB );
+
+		if ( reg_b & RTC_CB_OSC_DISABLE )
+		{
+			printf( "real-time-clock was stopped. Now starting...\n" );
+			reg_a |= RTC_CA_WRITE;
+			reg_b &= ~RTC_CB_OSC_DISABLE;
+			rtc_write( RTC_CONTROLA, reg_a );
+			rtc_write( RTC_CONTROLB, reg_b );
+		}
+
+		/* make sure read/write clock register bits are cleared */
+		reg_a &= ~( RTC_CA_WRITE | RTC_CA_READ );
+		rtc_write( RTC_CONTROLA, reg_a );
+
+		reg_c = rtc_read( RTC_CONTROLC );
+		if (( reg_c & RTC_CC_BATTERY_FLAG ) == 0 )
+			printf( "RTC battery low. Clock setting may not be reliable.\n");
+	}
+}
+
+inline unsigned bcd2bin (uchar n)
+{
+	return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+inline unsigned char bin2bcd (unsigned int n)
+{
+	return (((n / 10) << 4) | (n % 10));
+}
+
+static int get_century_flag(void)
+{
+	int flag = 0;
+	int bcd, century;
+	bcd = rtc_read( RTC_CENTURY );
+	century = bcd2bin( bcd & 0x3F );
+	rtc_write( RTC_CENTURY, bin2bcd(century+1));
+	if (bcd == rtc_read( RTC_CENTURY ))
+		flag = 1;
+	rtc_write( RTC_CENTURY, bcd);
+	return flag;
+}
+
+void rtc_get( struct rtc_time *tmp)
+{
+	if (phantom_flag < 0)
+		phantom_flag = get_phantom_flag();
+
+	if (phantom_flag)
+	{
+		unsigned char rtc[8];
+
+		phantom_rtc_read(RTC_BASE, rtc);
+
+		tmp->tm_sec	= bcd2bin(rtc[1] & 0x7f);
+		tmp->tm_min	= bcd2bin(rtc[2] & 0x7f);
+		tmp->tm_hour	= bcd2bin(rtc[3] & 0x1f);
+		tmp->tm_wday	= bcd2bin(rtc[4] & 0x7);
+		tmp->tm_mday	= bcd2bin(rtc[5] & 0x3f);
+		tmp->tm_mon	= bcd2bin(rtc[6] & 0x1f);
+		tmp->tm_year	= bcd2bin(rtc[7]) + 1900;
+		tmp->tm_yday = 0;
+		tmp->tm_isdst = 0;
+
+		if( (rtc[3] & 0x80)  && (rtc[3] & 0x40) ) tmp->tm_hour += 12;
+		if (tmp->tm_year < 1970) tmp->tm_year += 100;
+	} else {
+		uchar sec, min, hour;
+		uchar mday, wday, mon, year;
+
+		int century;
+
+		uchar reg_a;
+
+		if (century_flag < 0)
+			century_flag = get_century_flag();
+
+		reg_a = rtc_read( RTC_CONTROLA );
+		/* lock clock registers for read */
+		rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_READ ));
+
+		sec     = rtc_read( RTC_SECONDS );
+		min     = rtc_read( RTC_MINUTES );
+		hour    = rtc_read( RTC_HOURS );
+		mday    = rtc_read( RTC_DAY_OF_MONTH );
+		wday    = rtc_read( RTC_DAY_OF_WEEK );
+		mon     = rtc_read( RTC_MONTH );
+		year    = rtc_read( RTC_YEAR );
+		century = rtc_read( RTC_CENTURY );
+
+		/* unlock clock registers after read */
+		rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_READ ));
+
+		tmp->tm_sec  = bcd2bin( sec  & 0x7F );
+		tmp->tm_min  = bcd2bin( min  & 0x7F );
+		tmp->tm_hour = bcd2bin( hour & 0x3F );
+		tmp->tm_mday = bcd2bin( mday & 0x3F );
+		tmp->tm_mon  = bcd2bin( mon & 0x1F );
+		tmp->tm_wday = bcd2bin( wday & 0x07 );
+
+		if (century_flag) {
+			tmp->tm_year = bcd2bin( year ) +
+				( bcd2bin( century & 0x3F ) * 100 );
+		} else {
+			tmp->tm_year = bcd2bin( year ) + 1900;
+			if (tmp->tm_year < 1970) tmp->tm_year += 100;
+		}
+
+		tmp->tm_yday = 0;
+		tmp->tm_isdst= 0;
+	}
+}
+
+void rtc_set( struct rtc_time *tmp )
+{
+	if (phantom_flag < 0)
+		phantom_flag = get_phantom_flag();
+
+	if (phantom_flag) {
+		uint year;
+		unsigned char rtc[8];
+
+		year = tmp->tm_year;
+		year -= (year < 2000) ? 1900 : 2000;
+
+		rtc[0] = bin2bcd(0);
+		rtc[1] = bin2bcd(tmp->tm_sec);
+		rtc[2] = bin2bcd(tmp->tm_min);
+		rtc[3] = bin2bcd(tmp->tm_hour);
+		rtc[4] = bin2bcd(tmp->tm_wday);
+		rtc[5] = bin2bcd(tmp->tm_mday);
+		rtc[6] = bin2bcd(tmp->tm_mon);
+		rtc[7] = bin2bcd(year);
+
+		phantom_rtc_write(RTC_BASE, rtc);
+	} else {
+		uchar reg_a;
+		if (century_flag < 0)
+			century_flag = get_century_flag();
+
+		/* lock clock registers for write */
+		reg_a = rtc_read( RTC_CONTROLA );
+		rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_WRITE ));
+
+		rtc_write( RTC_MONTH, bin2bcd( tmp->tm_mon ));
+
+		rtc_write( RTC_DAY_OF_WEEK, bin2bcd( tmp->tm_wday ));
+		rtc_write( RTC_DAY_OF_MONTH, bin2bcd( tmp->tm_mday ));
+		rtc_write( RTC_HOURS, bin2bcd( tmp->tm_hour ));
+		rtc_write( RTC_MINUTES, bin2bcd( tmp->tm_min ));
+		rtc_write( RTC_SECONDS, bin2bcd( tmp->tm_sec ));
+
+		/* break year up into century and year in century */
+		if (century_flag) {
+			rtc_write( RTC_YEAR, bin2bcd( tmp->tm_year % 100 ));
+			rtc_write( RTC_CENTURY, bin2bcd( tmp->tm_year / 100 ));
+			reg_a &= 0xc0;
+			reg_a |= bin2bcd( tmp->tm_year / 100 );
+		} else {
+			rtc_write(RTC_YEAR, bin2bcd(tmp->tm_year -
+				((tmp->tm_year < 2000) ? 1900 : 2000)));
+		}
+
+		/* unlock clock registers after read */
+		rtc_write( RTC_CONTROLA, ( reg_a  & ~RTC_CA_WRITE ));
+	}
+}
+
+#endif
--- a/board/etin/debris/speed.h
+++ b/board/etin/debris/speed.h
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*-----------------------------------------------------------------------
+ * Timer value for timer 2, ICLK = 10
+ *
+ * SPEED_FCOUNT2 =  GCLK / (16 * (TIMER_TMR_PS + 1))
+ * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
+ *
+ * SPEED_FCOUNT2	timer 2 counting frequency
+ * GCLK	      		CPU clock
+ * SPEED_TMR2_PS	prescaler
+ */
+#define SPEED_TMR2_PS  	(250 - 1)	/* divide by 250	*/
+
+/*-----------------------------------------------------------------------
+ * Timer value for PIT
+ *
+ * PIT_TIME = SPEED_PITC / PITRTCLK
+ * PITRTCLK = 8192
+ */
+#define SPEED_PITC	(82 << 16)	/* start counting from 82	*/
+
+/*
+ * The new value for PTA is calculated from
+ *
+ *	PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
+ *
+ * gclk		CPU clock (not bus clock !)
+ * Trefresh	Refresh cycle * 4 (four word bursts used)
+ * DFBRG	For normal mode (no clock reduction) always 0
+ * PTP		Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
+ * NCS		Number of SDRAM banks (chip selects) on this UPM.
+ */
--- a/board/etin/debris/u-boot.lds
+++ b/board/etin/debris/u-boot.lds
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc824x/start.o	(.text)
+    lib_ppc/board.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+
+	. = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o (.text)
+
+	*(.text)
+
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
--- a/board/etx094/etx094.c
+++ b/board/etx094/etx094.c
@@ -321,8 +321,8 @@ static long int dram_size (long int mamr_value, long int *base,
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8xx_t *memctl = &immap->im_memctl;
 	volatile long int *addr;
-	ulong cnt, val;
-	ulong save[32];			/* to make test non-destructive */
+ 	ulong cnt, val, size;
+ 	ulong save[32];			/* to make test non-destructive */
 	unsigned char i = 0;

 	memctl->memc_mamr = mamr_value;
@@ -341,7 +341,13 @@ static long int dram_size (long int mamr_value, long int *base,

 	/* check at base address */
 	if ((val = *addr) != 0) {
+		/* Restore the original data before leaving the function.
+		 */
 		*addr = save[i];
+		for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) {
+			addr  = (volatile ulong *) base + cnt;
+			*addr = save[--i];
+		}
 		return (0);
 	}

@@ -352,7 +358,14 @@ static long int dram_size (long int mamr_value, long int *base,
 		*addr = save[--i];

 		if (val != (~cnt)) {
-			return (cnt * sizeof (long));
+			size = cnt * sizeof (long);
+			/* Restore the original data before returning
+			 */
+			for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+				addr  = (volatile ulong *) base + cnt;
+				*addr = save[--i];
+			}
+			return (size);
 		}
 	}
 	return (maxsize);
--- a/board/evb64260/flash.c
+++ b/board/evb64260/flash.c
@@ -79,7 +79,11 @@ flash_init (void)
 	size_b0 = flash_get_size(CFG_BOOT_FLASH_WIDTH, (vu_long *)base,
 	                         &flash_info[0]);

-	printf("[%ldkB@%lx] ", size_b0/1024, base);
+#ifndef CONFIG_P3G4
+	printf("[");
+	print_size (size_b0, "");
+	printf("@%08lX] ", base);
+#endif

 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n",
@@ -90,7 +94,11 @@ flash_init (void)
 	for(i=1;i<CFG_MAX_FLASH_BANKS;i++) {
 	    unsigned long size = flash_get_size(CFG_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]);

-	    printf("[%ldMB@%lx] ", size>>20, base);
+#ifndef CONFIG_P3G4
+	    printf("[");
+	    print_size (size, "");
+	    printf("@%08lX] ", base);
+#endif

 	    if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 		if(i==1) {
--- a/board/icecube/flash.c
+++ b/board/icecube/flash.c
@@ -123,7 +123,7 @@ static flash_info_t *flash_get_info(ulong base)

 	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
-		if (info->size && 
+		if (info->size &&
 			info->start[0] <= base && base <= info->start[0] + info->size - 1)
 			break;
 	}
@@ -260,7 +260,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	addr2 = (FPW *)((ulong)addr | 0x800000);
 	if (addr2 != addr &&
 		((addr2[0] & 0xff) == (addr[0] & 0xff)) && ((FPW)addr2[1] == (FPW)addr[1])) {
-		/* Seems 2 banks are the same space (8Mb chip is installed, 
+		/* Seems 2 banks are the same space (8Mb chip is installed,
 		 * J24 in default position (CS0)). Disable this (first) bank.
 		 */
 		info->flash_id = FLASH_UNKNOWN;
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -174,9 +174,9 @@ void flash_preinit(void)
 void flash_afterinit(ulong size)
 {
 	if (size == 0x800000) { /* adjust mapping */
-		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = 
+		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
 			START_REG(CFG_BOOTCS_START | size);
-		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = 
+		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
 			STOP_REG(CFG_BOOTCS_START | size, size);
 	}
 }
--- a/board/impa7/flash.c
+++ b/board/impa7/flash.c
@@ -53,7 +53,7 @@ ulong flash_init(void)
 	else if (i == 1)
 	  flashbase = PHYS_FLASH_2;
 	else
-	  panic("configured to many flash banks!\n");
+	  panic("configured too many flash banks!\n");
 	for (j = 0; j < flash_info[i].sector_count; j++)
 	{
 	    if (j <= 7)
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -276,7 +276,7 @@ ulong flash_init(void)
 				flashbase = PHYS_FLASH_1;
 				break;
 			default:
-				panic("configured to many flash banks!\n");
+				panic("configured too many flash banks!\n");
 				break;
 		}
 		for (j = 0; j < flash_info[i].sector_count; j++) {
--- a/board/ixdp425/Makefile
+++ b/board/ixdp425/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2000, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= ixdp425.o flash.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -0,0 +1,2 @@
+#TEXT_BASE = 0x00100000
+TEXT_BASE = 0x00f00000
--- a/board/ixdp425/flash.c
+++ b/board/ixdp425/flash.c
@@ -0,0 +1,427 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH		ushort
+#define FLASH_PORT_WIDTHV		vu_short
+#define SWAP(x)               		x
+#else
+#define FLASH_PORT_WIDTH		ulong
+#define FLASH_PORT_WIDTHV		vu_long
+#define SWAP(x)               		__swab32(x)
+#endif
+
+#define FPW	   FLASH_PORT_WIDTH
+#define FPWV   FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	int i;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		default:
+			panic ("configured to many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+		       &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+			info->protect[i] = 0;
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F128J3A:
+		printf ("28F128J3A\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+	return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+	volatile FPW value;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
+
+	mb ();
+	value = addr[0];
+
+	switch (value) {
+
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);	/* no or unknown flash  */
+	}
+
+	mb ();
+	value = addr[1];	/* device ID            */
+
+	switch (value) {
+
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x02000000;
+		break;		/* => 16 MB     */
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf ("** ERROR: sector count %d > max (%d) **\n",
+			info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+	} else {
+		printf ("\n");
+	}
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			FPW status;
+
+			printf ("Erasing sector %2d ... ", sect);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
+
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
+
+			while (((status =
+				 *addr) & (FPW) 0x00800080) !=
+			       (FPW) 0x00800080) {
+				if (get_timer_masked () >
+				    CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = (FPW) 0x00B000B0;	/* suspend erase         */
+					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
+					rcode = 1;
+					break;
+				}
+			}
+
+			*addr = (FPW) 0x00500050;	/* clear status register cmd.   */
+			*addr = (FPW) 0x00FF00FF;	/* resest to read mode          */
+
+			printf (" done\n");
+		}
+	}
+	return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	FPW data;
+	int count, i, l, rc, port_width;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		return 4;
+	}
+
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+	wp = (addr & ~1);
+	port_width = 2;
+#else
+	wp = (addr & ~3);
+	port_width = 4;
+#endif
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	count = 0;
+	while (cnt >= port_width) {
+		data = 0;
+		for (i = 0; i < port_width; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
+		cnt -= port_width;
+		if (count++ > 0x800) {
+			spin_wheel ();
+			count = 0;
+		}
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
+	}
+
+	return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong status;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf ("not erased at %08lx (%lx)\n", (ulong) addr,
+			(ulong) * addr);
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	*addr = (FPW) 0x00400040;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait while polling the status register */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+			return (1);
+		}
+	}
+
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
+
+	return (0);
+}
+
+void inline spin_wheel (void)
+{
+	static int p = 0;
+	static char w[] = "\\/-";
+
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
+}
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -0,0 +1,76 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/ixp425.h>
+#include <common.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/* local prototypes */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int
+/**********************************************************/
+board_post_init (void)
+/**********************************************************/
+{
+	return (0);
+}
+
+int
+/**********************************************************/
+board_init (void)
+/**********************************************************/
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* arch number of IXDP */
+	gd->bd->bi_arch_number = 245;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x00000100;
+
+	return 0;
+}
+
+int
+/**********************************************************/
+dram_init (void)
+/**********************************************************/
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size  = PHYS_SDRAM_1_SIZE;
+
+	return (0);
+}
--- a/board/ixdp425/u-boot.lds
+++ b/board/ixdp425/u-boot.lds
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/ixp/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	armboot_end_data = .;
+
+	. = ALIGN(4);
+	bss_start = .;
+	.bss : { *(.bss) }
+	bss_end = .;
+
+	armboot_end = .;
+}
--- a/board/lart/flash.c
+++ b/board/lart/flash.c
@@ -86,7 +86,7 @@ ulong flash_init(void)
 	if (i == 0)
 	  flashbase = PHYS_FLASH_1;
 	else
-	  panic("configured to many flash banks!\n");
+	  panic("configured too many flash banks!\n");
 	for (j = 0; j < flash_info[i].sector_count; j++)
 	{
 	    if (j <= 7)
--- a/board/logodl/flash.c
+++ b/board/logodl/flash.c
@@ -91,7 +91,7 @@ ulong flash_init(void)
 		flashbase = PHYS_FLASH_2;
 		break;
 	   default:
-		panic("configured to many flash banks!\n");
+		panic("configured too many flash banks!\n");
 		break;
 	}
 	for (j = 0; j < flash_info[i].sector_count; j++)
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -76,7 +76,7 @@ unsigned long flash_init (void)
 			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
 			break;
 		default:
-			panic ("configured to many flash banks!\n");
+			panic ("configured too many flash banks!\n");
 			break;
 		}
 		size += flash_info[i].size;
--- a/board/ml2/flash.c
+++ b/board/ml2/flash.c
@@ -72,7 +72,7 @@ ulong flash_init(void) {
 		if (i==0)
 			flashbase = CFG_FLASH_BASE;
 		else
-			panic("configured to many flash banks!\n");
+			panic("configured too many flash banks!\n");
 		for (j = 0; j < flash_info[i].sector_count; j++)
 				flash_info[i].start[j]=flashbase + j * SECT_SIZE;

--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -238,7 +238,9 @@ int board_pre_init (void)

 long int initdram (int board_type)
 {
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
 	vu_long *bcsr = (vu_long *)CFG_BCSR;
+#endif
 	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 	volatile uchar *ramaddr, c = 0xff;
--- a/board/mpc8266ads/mpc8266ads.c
+++ b/board/mpc8266ads/mpc8266ads.c
@@ -46,7 +46,7 @@
 *   PSDMR_BUFCMD adds a clock
 *   0            no extra clock
 */
-#define CONFIG_PBI		PSDMR_PBI
+#define CONFIG_PBI		0
 #define PESSIMISTIC_SDRAM	0
 #define EAMUX			0	/* EST requires EAMUX */
 #define BUFCMD			0
@@ -427,7 +427,7 @@ long int initdram(int board_type)
    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
    sda10 = sdam + 2;
 #else
-    sdam = cols - 6;
+    sdam = cols + banks - 8;
    bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols);
    sda10 = sdam;
 #endif
@@ -557,9 +557,18 @@ long int initdram(int board_type)
 	printf("SDRAM configuration read from SPD\n");
 	printf("\tSize per side = %dMB\n", sdram_size >> 20);
 	printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1<<(banks), cols, rows, data_width);
-	printf("\tRefresh rate = %d, CAS latency = %d\n", psrt, caslatency);
+	printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency);
+#if(CONFIG_PBI == 0)	/* bank-based interleaving */
+    printf(", Using Bank Based Interleave\n");
+#else
+    printf(", Using Page Based Interleave\n");
+#endif
 	printf("\tTotal size: ");

+    /* this delay only needed for original 16MB DIMM...
+     * Not needed for any other memory configuration */
+    if ((sdram_size * chipselects) == (16 *1024 *1024))
+	udelay (250000);
    return (sdram_size * chipselects);
 	/*return (16 * 1024 * 1024);*/
 }
--- a/board/mpc8540ads/Makefile
+++ b/board/mpc8540ads/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+SOBJS	:= init.o
+#SOBJS	:=
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- a/board/mpc8540ads/config.mk
+++ b/board/mpc8540ads/config.mk
@@ -0,0 +1,32 @@
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,Motorola Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8540ads board
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
--- a/board/mpc8540ads/flash.c
+++ b/board/mpc8540ads/flash.c
@@ -0,0 +1,539 @@
+/*
+ * (C) Copyright 2003 Motorola Inc.
+ *  Xianghua Xiao,(X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000, 2001
+ *  Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if !defined(CFG_NO_FLASH)
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+#undef DEBUG
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size;
+	int i;
+
+	/* Init: enable write,
+	 * or we cannot even write flash commands
+	 */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+		/* set the default sector offset */
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+	}
+
+	/* Re-do sizing to get full correct info */
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	flash_info[0].size = size;
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+#endif
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
+	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+				break;
+	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+				break;
+	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+				break;
+	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+				break;
+	case FLASH_28F640J3A:   printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+	ulong sector_offset;
+
+#ifdef DEBUG
+	printf("Check flash at 0x%08x\n",(uint)addr);
+#endif
+	/* Write "Intelligent Identifier" command: read Manufacturer ID */
+	*addr = 0x90909090;
+	udelay(20);
+	asm("sync");
+
+	value = addr[0] & 0x00FF00FF;
+
+#ifdef DEBUG
+	printf("manufacturer=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case MT_MANUFACT:	/* SHARP, MT or => Intel */
+	case INTEL_ALT_MANU:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		printf("unknown manufacturer: %x\n", (unsigned int)value);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[1] & 0x00FF00FF;             /* device ID            */
+
+#ifdef DEBUG
+	printf("deviceID=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case (INTEL_ID_28F016S):
+		info->flash_id += FLASH_28F016SV;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F160S3):
+		info->flash_id += FLASH_28F160S3;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F320S3):
+		info->flash_id += FLASH_28F320S3;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		sector_offset = 0x20000;
+		break;				/* => 2x4 MB		*/
+
+	case (INTEL_ID_28F640J3A):
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x01000000;
+		sector_offset = 0x40000;
+		break;                          /* => 2x8 MB             */
+
+	case SHARP_ID_28F016SCL:
+	case SHARP_ID_28F016SCZ:
+		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+		info->sector_count  = 32;
+		info->size          = 0x00800000;
+		sector_offset = 0x40000;
+		break;				/* => 4x2 MB		*/
+
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = base;
+		base += sector_offset;
+		/* don't know how to check sector protection */
+		info->protect[i] = 0;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (vu_long *)info->start[0];
+		*addr = 0xFFFFFF;	/* reset bank to read array mode */
+		asm("sync");
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+#ifdef DEBUG
+	printf("\nFlash Erase:\n");
+#endif
+	/* Make Sure Block Lock Bit is not set. */
+	if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+		return 1;
+	}
+
+	/* Start erase on unprotected sectors */
+#if defined(DEBUG)
+	printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
+#endif
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *)(info->start[sect]);
+			asm("sync");
+
+			last = start = get_timer (0);
+
+			/* Disable interrupts which might cause a timeout here */
+			flag = disable_interrupts();
+
+			/* Reset Array */
+			*addr = 0xffffffff;
+			asm("sync");
+			/* Clear Status Register */
+			*addr = 0x50505050;
+			asm("sync");
+			/* Single Block Erase Command */
+			*addr = 0x20202020;
+			asm("sync");
+			/* Confirm */
+			*addr = 0xD0D0D0D0;
+			asm("sync");
+
+			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+			    /* Resume Command, as per errata update */
+			    *addr = 0xD0D0D0D0;
+			    asm("sync");
+			}
+
+			/* re-enable interrupts if necessary */
+			if (flag)
+				enable_interrupts();
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+			while ((*addr & 0x00800080) != 0x00800080) {
+				if(*addr & 0x00200020){
+					printf("Error in Block Erase - Lock Bit may be set!\n");
+					printf("Status Register = 0x%X\n", (uint)*addr);
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					asm("sync");
+					return 1;
+				}
+				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					asm("sync");
+					return 1;
+				}
+				/* show that we're waiting */
+				if ((now - last) > 1000) {	/* every second */
+					putc ('.');
+					last = now;
+				}
+			}
+
+			/* reset to read mode */
+			*addr = 0xFFFFFFFF;
+			asm("sync");
+		}
+	}
+
+	printf ("flash erase done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)dest;
+	ulong start, csr;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Write Command */
+	*addr = 0x10101010;
+	asm("sync");
+
+	/* Write Data */
+	*addr = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	flag  = 0;
+
+	while (((csr = *addr) & 0x00800080) != 0x00800080) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			flag = 1;
+			break;
+		}
+	}
+	if (csr & 0x40404040) {
+		printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+		flag = 1;
+	}
+
+	/* Clear Status Registers Command */
+	*addr = 0x50505050;
+	asm("sync");
+	/* Reset to read array mode */
+	*addr = 0xFFFFFFFF;
+	asm("sync");
+
+	return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long  * addr)
+{
+	ulong start, now;
+
+	/* Reset Array */
+	*addr = 0xffffffff;
+	asm("sync");
+	/* Clear Status Register */
+	*addr = 0x50505050;
+	asm("sync");
+
+	*addr = 0x60606060;
+	asm("sync");
+	*addr = 0xd0d0d0d0;
+	asm("sync");
+
+	start = get_timer (0);
+	while((*addr & 0x00800080) != 0x00800080){
+		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout on clearing Block Lock Bit\n");
+			*addr = 0xFFFFFFFF;	/* reset bank */
+			asm("sync");
+			return 1;
+		}
+	}
+	return 0;
+}
+
+#endif /* !CFG_NO_FLASH */
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
wdenk	b13fb01a62	* Fix parameter passing to standalone images with bootm command * Patch by Kyle Harris, 30 Oct 2003: Fix build errors for ixdp425 board * Patch by David M. Horn, 29 Oct 2003: Fixes to build under CYGWIN * Get IceCube MGT5100 working (again)	2003-10-30 21:49:38 +00:00
wdenk	5fa66df63a	* Prepare for release * Fix problems in memory test on some boards (which was not non-destructive as intended) * Patch by Gary Jennejohn, 28 Oct 2003: Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack to prevent stack overflow on ARM systems	2003-10-29 23:18:55 +00:00
wdenk	a0f2fe524c	* Patch by Stephan Linz, 28 Oct 2003: fix init sequence error for NIOS port * Allow lowercase spelling for IceCube_5200; support MPC5200LITE name * Add CONFIG_VERSION_VARIABLE to TRAB configuration	2003-10-28 09:14:21 +00:00
wdenk	a57a496f4d	* Patch by Xiao Xianghua, 23 Oct 2003: small patch for mpc85xx * Fix small problem in MPC5200 I2C driver * Fix FCC3 support on ATC board	2003-10-26 22:52:58 +00:00
dzu	8cb8143ef7	* Correct header printing for multi-image files in do_bootm() * Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED	2003-10-24 13:14:45 +00:00
wdenk	4654af27b8	Fix PCI problems on PPChameleon board	2003-10-22 09:00:28 +00:00
wdenk	a3ad8e26a4	* Patch by Steven Scholz, 18 Oct 2003: Fix AT91RM9200 ethernet driver * Patch by Nye Liu, 17 Oct 2003: Fix typo in include/mpc8xx.h * Patch by Richard Woodruff, 16 Oct 03: Fixes for cpu/arm925/interrupt.c - Initialize timestamp & lastdec vars. - fix timestamp overflows. - fix lastdec overflow. - smarter normalization to allow udelay() below 1ms to work. * Patch by Scott McNutt, 16 Oct add networking support for the Altera Nios Development Kit, Cyclone Edition (DK-1C20) * Patch by Jon Diekema, 14 Oct 2003: add hint about doc/README.silent to README file	2003-10-19 23:22:11 +00:00
wdenk	d7281f4109	* Fix PCI problems on PPChameleonEVB * TRAB auto-update: image type patch by Martin Krause, 17 Oct 2003	2003-10-19 22:30:08 +00:00
dzu	e7df029f1a	Add CompactFlash support for NSCU	2003-10-19 21:43:26 +00:00
wdenk	3d1e8a9d4e	TRAB auto-update: Base decision if we have to strip the image header on image type as encoded in the header	2003-10-16 12:53:35 +00:00
wdenk	42d1f0394b	* Patches by Xianghua Xiao, 15 Oct 2003: - Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup	2003-10-15 23:53:47 +00:00
wdenk	2d5b561e2b	* Make sure HUSH is initialized for running auto-update scripts * Make 5200 reset command _really_ reset the board, without running any other code after it * Fix flash mapping and display on P3G4 board * Patch by Kyle Harris, 15 Jul 2003: - add support for Intel IXP425 CPU - add support for IXDP425 eval board	2003-10-14 19:43:55 +00:00
wdenk	f72da3406b	Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent for more information	2003-10-10 10:05:42 +00:00
wdenk	5da627a424	* Patch by Steven Scholz, 10 Oct 2003 - Add support for Altera FPGA ACEX1K * Patches by Thomas Lange, 09 Oct 2003: - Endian swap ATA identity for all big endian CPUs, not just PPC - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize args to linux - add support for dbau1x00 board (MIPS32)	2003-10-09 20:09:04 +00:00
wdenk	15647dc7fd	* Patches by Thomas Lange, 09 Oct 2003: - fix cmd_ide.c for non ppc boards (read/write functions did not add ATA base address) - fix for shannon board - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code * Patch by Sangmoon Kim, 07 Oct 2003: add support for debris board	2003-10-09 19:00:25 +00:00
wdenk	a0ff7f2eda	* Patch by Martin Krause, 09 Oct 2003: Fixes for TRAB board - /board/trab/rs485.c: correct baudrate - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in udelay(); fix some timing problems with adc controller - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power; modify commands: touch and buzzer * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE (quick & dirty workaround for rogue pointer problem in get_vfatname()); Use direct function calls for auto_update instead of hush commands	2003-10-09 13:16:55 +00:00
wdenk	4a5517094d	* Patch by Scott McNutt, 04 Oct 2003: - add support for Altera Nios-32 CPU - add support for Nios Cyclone Development Kit (DK-1C20) * Patch by Steven Scholz, 29 Sep 2003: - A second parameter for bootm overwrites the load address for "Standalone Application" images. - bootm sets environment variable "filesize" to the resulting (uncompressed) data length for "Standalone Application" images when autostart is set to "no". Now you can do something like if bootm $fpgadata $some_free_ram ; then fpga load 0 $some_free_ram $filesize fi * Patch by Denis Peter, 25 Sept 2003: add support for the MIP405 Rev. C board	2003-10-08 23:26:14 +00:00
wdenk	54387ac931	* Patch by Yuli Barcohen, 25 Sep 2003: add support for Zephyr Engineering ZPC.1900 board * Patch by Anders Larsen, 23 Sep 2003: add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only implemented for the x86 architecture)	2003-10-08 22:45:44 +00:00
wdenk	fc3e2165ef	* Patch by Sangmoon Kim, 23 Sep 2003: fix pll_pci_to_mem_multiplier table for MPC8245 * Patch by Anders Larsen, 22 Sep 2003: enable timed autoboot on PXA * Patch by David M�ller, 22 Sep 2003: - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver returns correct libgcc file path - "latency" reduction of busy-loop waiting to improve "U-Boot" boot time on s3c24x0 systems * Patch by Jon Diekema, 19 Sep 2003: - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet link state to the fault LED. - In NetLoop, make the Fault LED reflect the link status. The link status gets updated on entry, and on timeouts.	2003-10-08 22:33:00 +00:00
wdenk	ef1464cc01	* Patch by Anders Larsen, 18 Sep 2003: allow mkimage to build and run on Cygwin-hosted systems * Patch by Frank M�ller, 18 Sep 2003: use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in cpu/mpc8xx/fec.c * Patch by Pantelis Antoniou, 16 Sep 2003: add tool to compute fileds in the PLPRCR register for MPC86x	2003-10-08 22:14:02 +00:00
wdenk	d9a405aaf6	Use IH_TYPE_FILESYSTEM for TRAB "disk" images.	2003-10-07 20:01:55 +00:00
wdenk	147031aef1	Fix build problems under FreeBSD	2003-10-07 10:33:38 +00:00
wdenk	887b372f5d	Add generic filesystem image type	2003-10-06 22:00:45 +00:00
wdenk	fbe4b5cbde	* Update TRAB auto update code * Make fatload set filesize environment variable fix potential buffer overlow problem * enable basic / medium / high-end configurations for PPChameleonEVB board; fix NAND code * enable TFTP client code to specify to the server the desired timeout value (see RFC-2349)	2003-10-06 21:55:32 +00:00
dzu	bb65a31267	Improve SDRAM setup for TRAB board	2003-09-30 15:22:12 +00:00
dzu	88a1bfa8b8	Suppress all output with splashscreen configured only if "splashimage" is set	2003-09-30 15:11:43 +00:00
dzu	cad07371fc	* Fix problems with I2C support for mpc5200	2003-09-30 14:36:51 +00:00
dzu	ab209d5107	Fix problems with I2C support for mpc5200	2003-09-30 14:08:43 +00:00
dzu	87970ebeb5	Suppress all output with splashscreen configured only if "splashimage" is set	2003-09-29 21:55:54 +00:00
dzu	8a42eac744	* Adapt TRAB configuration and auto_update to new memory layout	2003-09-29 21:55:54 +00:00
dzu	91e940d9bc	Add configuration for wtk board	2003-09-25 22:32:40 +00:00
dzu	29127b6a23	Add support for the Sharp LQ065T9DR51U LCD display	2003-09-25 22:30:12 +00:00
wdenk	1d70468b03	"start" may be legitimately 0x0000	2003-09-19 08:29:25 +00:00
wdenk	c3d98ed9ca	Update MPC5200 port pin configuration for Linux CAN drivers.	2003-09-18 20:10:12 +00:00
wdenk	80369866a4	Work on TRAB's auto_update feature. Cleanup for submitted patches.	2003-09-18 18:55:25 +00:00
wdenk	65bd0e284b	* Patch by Rune Torgersen, 17 Sep 2003: - Fixes for MPC8266 default config - Allow eth_loopback_test() on 8260 to use a subset of the FCC's	2003-09-18 10:45:21 +00:00
wdenk	206c60cbea	* Patches by Jon Diekema, 17 Sep 2003: - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and env_common.c) - sbc8260 tweaks - adjust "help" output	2003-09-18 10:02:25 +00:00
wdenk	5f535fe170	* Patches by Anders Larsen, 17 Sep 2003: - fix spelling errors - set GD_FLG_DEVINIT flag only after device function pointers are valid - Allow CFG_ALT_MEMTEST on systems where address zero isn't writeable - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs - trigger watchdog while waiting in serial driver	2003-09-18 09:21:33 +00:00
wdenk	b0639ca332	Support new configuration of TRAB board with more memory Minor cleanup of comments	2003-09-17 22:48:07 +00:00
wdenk	f54ebdfa28	Add auto-update code for TRAB board using USB memory sticks	2003-09-17 15:10:32 +00:00
wdenk	34b3049a60	Code cleanup	2003-09-16 21:07:28 +00:00
wdenk	ef709e9230	* Disable MPC5200 bus pipelining as workaround for bus contention	2003-09-16 17:35:37 +00:00
wdenk	a57106fcb3	* Fix timeout problems with 1st packet on MPC5200	2003-09-16 17:29:31 +00:00
wdenk	373e6bec13	Disable MPC5200 bus pipelining as workaround for bus contention	2003-09-16 17:20:34 +00:00
wdenk	4aeb251f90	* Modify XLB arbiter priorities on MPC5200 so all devices use same priority; configure critical interrupts to be handled like external interrupts	2003-09-16 17:06:05 +00:00
wdenk	acf98e7f30	Make IPB clock on MGT5100/MPC5200 configurable in board config file; go back to 66 MHz for stability	2003-09-16 11:39:10 +00:00
wdenk	b56ddc636d	Cleanup of code, output formatting, and indentation.	2003-09-15 21:14:37 +00:00
wdenk	78137c3c93	* Patches by Jon Diekema, 15 Sep 2003: - add description for missing CFG_CMD_* entries in the README file - sacsng tweaks: include/configs/sacsng.h: + Support extra bootp options like: 2nd DNS and send hostname + Enabling ping and irq command + Adding defines for a bunch of misc configrabled options (patches for these options will be coming) + Adding watchdog support, but it isn't enabled yet. board/sacsng/sacsng.c: + Suppressing unneeded output when the quiet environment is non-zero. + show_boot_progress() now accepts any negative number as a failure code. + show_boot_progress() flashes the error code 5 times, and then resets the board to retry the boot from the top * Patch by Gleb Natapov, 14 Sep 2003: enable watchdog support for all MPC824x boards that have a watchdog	2003-09-15 18:00:00 +00:00
wdenk	35656de729	* Patch by Gleb Natapov, 14 Sep 2003: enable watchdog support for all MPC824x boards that have a watchdog * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the "Non-octet Aligned Frame" errors we see at 100 Mbps * Patch by Sharad Gupta, 14 Sep 2003: fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])	2003-09-14 19:08:39 +00:00
wdenk	200f8c7a4c	* Patch by llandre, 11 Sep 2003: update configuration for PPChameleonEVB board	2003-09-13 19:13:29 +00:00
wdenk	531716e171	* Patch by David M�ller, 13 Sep 2003: various changes to VCMA9 board specific files * Add I2C support for MGT5100 / MPC5200	2003-09-13 19:01:12 +00:00
wdenk	b70e7a00c8	* Patch by Rune Torgersen, 11 Sep 2003: Changed default memory option on MPC8266ADS to NOT be Page Based Interleave, since this doesn't work very well with the standard 16MB DIMM * Patch by George G. Davis, 12 Sep 2003: fix Makefile settings for sk98 driver	2003-09-12 20:09:09 +00:00
wdenk	f5300ab241	Move TRAB burn-in tests to TRAB board directory	2003-09-12 15:35:15 +00:00
stroese	68ce8957e5	Patch by Stefan Roese, 12 Sep 2003	2003-09-12 08:57:52 +00:00
stroese	72cd5aa703	New boards DP405, HUB405, PLU405, VOH405 added.	2003-09-12 08:57:15 +00:00
stroese	13fdf8a6ba	New board config file added.	2003-09-12 08:55:18 +00:00
stroese	2853d29b52	Update configuration.	2003-09-12 08:53:54 +00:00
stroese	428c563938	PPC405EP: set vendor id.	2003-09-12 08:52:09 +00:00
stroese	342f551bc9	Disable memory controller before setting first values.	2003-09-12 08:49:58 +00:00
stroese	ef9e86854e	PMC405 update.	2003-09-12 08:46:58 +00:00
stroese	09433a781b	PCI405 update.	2003-09-12 08:46:10 +00:00
stroese	1b554406cc	CPCI405(AB) update.	2003-09-12 08:44:46 +00:00
stroese	895af12a21	ASH405 update.	2003-09-12 08:43:46 +00:00
stroese	9a2dd74032	Xilinx jtag tool added.	2003-09-12 08:42:58 +00:00
stroese	22a40b0a88	Board VOH405 added.	2003-09-12 08:42:13 +00:00
stroese	b318262a71	Board PLU405 added.	2003-09-12 08:41:56 +00:00
stroese	a65cb68237	Board HUB405 added.	2003-09-12 08:41:39 +00:00
stroese	5ce08eea97	Board DP405 added.	2003-09-12 08:41:24 +00:00
wdenk	4f7cb08ee7	* Patch by Martin Krause, 11 Sep 2003: add burn-in tests for TRAB board * Enable instruction cache on MPC5200 board	2003-09-11 23:06:34 +00:00
wdenk	a43278a43d	* Patch by Gary Jennejohn, 11 Sep 2003: - allow for longer timeouts for USB mass storage devices * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. * Change output format for NAND flash - make it look like for other memory, too	2003-09-11 19:48:06 +00:00
wdenk	7205e4075d	* Patches by Denis Peter, 9 Sep 2003: add FAT support for IDE, SCSI and USB * Patches by Gleb Natapov, 2 Sep 2003: - cleanup of POST code for unsupported architectures - MPC824x locks way0 of data cache for use as initial RAM; this patch unlocks it after relocation to RAM and invalidates the locked entries. * Patch by Gleb Natapov, 30 Aug 2003: new I2C driver for mpc107 bridge. Now works from flash. * Patch by Dave Ellis, 11 Aug 2003: - JFFS2: fix typo in common/cmd_jffs2.c - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option - JFFS2: remove node version 0 warning - JFFS2: accept JFFS2 PADDING nodes - SXNI855T: add AM29LV800 support - SXNI855T: move environment from EEPROM to flash - SXNI855T: boot from JFFS2 in NOR or NAND flash * Patch by Bill Hargen, 11 Aug 2003: fixes for I2C on MPC8240 - fix i2c_write routine - fix iprobe command - eliminates use of global variables, plus dead code, cleanup.	2003-09-10 22:30:53 +00:00
wdenk	149dded2b1	* Add support for USB Mass Storage Devices (BBB) (tested with USB memory sticks only) * Avoid flicker on TRAB's VFD	2003-09-10 18:20:28 +00:00