MPC5200: enable snooping of DMA transactions on XLB even if no PCI

is configured; othrwise DMA accesses aren't cache coherent which
causes for example USB to fail.

COPYING

@@ -1,3 +1,21 @@
+  NOTE! This copyright does *not* cover the so-called "standalone"
+applications that use U-Boot services by means of the jump table
+provided by U-Boot exactly for this purpose - this is merely
+considered normal use of U-Boot, and does *not* fall under the
+heading of "derived work".
+
+  The header files "include/image.h" and "include/asm-*/u-boot.h"
+define interfaces to U-Boot. Including these (unmodified) header
+files in another file is considered normal use of U-Boot, and does
+*not* fall under the heading of "derived work".
+
+  Also note that the GPL below is copyrighted by the Free Software
+Foundation, but the instance of code that it refers to (the U-Boot
+source code) is copyrighted by me and others who actually wrote it.
+-- Wolfgang Denk
+
+=======================================================================
+
 		    GNU GENERAL PUBLIC LICENSE
 		       Version 2, June 1991
 

CREDITS

@@ -29,6 +29,7 @@ D: ERIC Support
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA & NETPHONE board support, ARTOS support.
+D: Support for Silicon Turnkey eXpress XTc
 
 N: Pierre Aubert
 E: <p.aubert@staubli.com>
@@ -40,6 +41,7 @@ D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
 D: Support for Zephyr Engineering ZPC.1900 board.
 D: Support for Interphase iSPAN boards.
 D: Support for Analogue&Micro Adder boards.
+D: Support for Analogue&Micro Rattler boards.
 W: http://www.arabellasw.com
 
 N: Jerry van Baren
@@ -63,6 +65,12 @@ N: Raphael Bossek
 E: raphael.bossek@solutions4linux.de
 D: 8xxrom-0.3.0
 
+N: Cliff Brake
+E: cliff.brake@gmail.com
+D: Port to Vibren PXA255 IDP platform
+W: http://www.vibren.com
+W: http://bec-systems.com
+
 N: Rick Bronson
 E: rick@efn.org
 D: Atmel AT91RM9200DK and NAND support
@@ -197,10 +205,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
 W: www.denx.de
 
 N: Murray Jensen
-E: Murray.Jensen@cmst.csiro.au
+E: Murray.Jensen@csiro.au
 D: Initial 8260 support; GDB support
 D: Port to Cogent+Hymod boards; Hymod Board Database
-W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html
 
 N: Yoo. Jonghoon
 E: yooth@ipone.co.kr
@@ -223,6 +230,10 @@ N: Sangmoon Kim
 E: dogoil@etinsys.com
 D: Support for debris board
 
+N: Frederick W. Klatt
+E: fred.klatt@windriver.com
+D: Support for Wind River SBC8540/SBC8560 boards
+
 N: Thomas Koeller
 E: tkoeller@gmx.net
 D: Port to Motorola Sandpoint 3 (MPC8240)
@@ -244,11 +255,20 @@ N: Thomas Lange
 E: thomas@corelatus.se
 D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes
 
+N: Marc Leeman
+E: marc.leeman@barco.com
+D: Support for Barco Streaming Video Card (SVC) and Sample Compress Network (SCN)
+W: www.barco.com
+
 N: The LEOX team
 E: team@leox.org
 D: Support for LEOX boards, DS164x RTC
 W: http://www.leox.org
 
+N: Leif Lindholm
+E: leif.lindholm@i3micro.com
+D: Support for AMD dbau1550 board.
+
 N: Stephan Linz
 E: linz@li-pro.net
 D: Support for Nios Stratix Development Kit (DK-1S10)
@@ -260,8 +280,9 @@ E: lo@routefree.com
 D: Support for DOS partitions
 
 N: Dan Malek
-E: dan@netx4.com
+E: dan@embeddedalley.com
 D: FADSROM, the grandfather of all of this
+D: Support for Silicon Turnkey eXpress XTc
 
 N: Andrea "llandre" Marson
 E: andrea.marson@dave-tech.it
@@ -286,13 +307,20 @@ D: Support for Samsung ARM920T SMDK2410 eval board
 
 N: Scott McNutt
 E: smcnutt@psyent.com
-D: Support for Altera Nios-32 CPU, for Nios Cyclone Development Kit (DK-1C20)
+D: Support for Altera Nios-32 CPU
+D: Support for Altera Nios-II CPU
+D: Support for Nios Cyclone Development Kit (DK-1C20)
+W: http://www.psyent.com
 
 N: Rolf Offermanns
 E: rof@sysgo.de
 D: Initial support for SSV-DNP1110, SMC91111 driver
 W: www.elinos.com
 
+N: John Otken
+E: jotken@softadvances.com
+D: Support for AMCC Luan 440SP board
+
 N: Tolunay Orkun
 E: torkun@nextio.com
 D: Support for Cogent CSB272 & CSB472 boards
@@ -322,12 +350,12 @@ D: BedBug embedded debugger code
 
 N: Daniel Poirot
 E: dan.poirot@windriver.com
-D: Support for the sbc8240 board
+D: Support for the Wind River sbc405, sbc8240 board
 W: http://www.windriver.com
 
 N: Stefan Roese
 E: stefan.roese@esd-electronics.com
-D: IBM PPC401/403/405GP Support; Windows environment support
+D: AMCC PPC401/403/405GP Support; Windows environment support
 
 N: Erwin Rol
 E: erwin@muffin.org
@@ -343,7 +371,7 @@ D: Author of LiMon-1.4.2, which contributed some ideas
 
 N: Travis B. Sawyer
 E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.  IBM 440gx Ref Platform (Ocotea)
+D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board.  AMCC 440gx Ref Platform (Ocotea)
 
 N: Paolo Scaffardi
 E: arsenio@tin.it
@@ -353,6 +381,10 @@ N: Robert Schwebel
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
 
+N: Art Shipkowski
+E: art@videon-central.com
+D: Support for NetSilicon NS7520
+
 N: Yasushi Shoji
 E: yashi@atmark-techno.com
 D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
@@ -382,6 +414,10 @@ N: Rune Torgersen
 E: <runet@innovsys.com>
 D: Support for Motorola MPC8266ADS board
 
+N: Greg Ungerer
+E: greg.ungerer@opengear.com
+D: Support for ks8695 CPU, and OpenGear cmXXXX boards
+
 N: David Updegraff
 E: dave@cray.com
 D: Port to Cray L1 board; DHCP vendor extensions
@@ -390,6 +426,10 @@ N: Christian Vejlbo
 E: christian.vejlbo@tellabs.com
 D: FADS860T ethernet support
 
+N: Robert Whaley
+E: rwhaley@applieddata.net
+D: Port to ARM PXA27x adsvix SBC
+
 N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board
@@ -411,3 +451,8 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
+
+N: James MacAulay
+E: james.macaulay@amirix.com
+D: Suppport for Amirix AP1000
+W: www.amirix.com

MAINTAINERS

@@ -25,21 +25,26 @@ Pantelis Antoniou <panto@intracom.gr>
 
 	NETVIA			MPC8xx
 
+Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+	cpci5200		MPC5200
+	pf5200			MPC5200
+
+	CPCI750			PPC750FX/GX
+
 Yuli Barcohen <yuli@arabellasw.com>
 
 	Adder			MPC87x/MPC852T
+	ep8248			MPC8248
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
+	Rattler			MPC8248
 	ZPC1900			MPC8265
 
 Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 
 	sacsng			MPC8260
 
-Rick Bronson <rick@efn.org>
-
-	AT91RM9200DK		at91rm9200
-
 Oliver Brown <obrown@adventnetworks.com>
 
 	gw8260			MPC8260
@@ -124,6 +129,36 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 	AmigaOneG3SE		MPC7xx
 
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+	ADCIOP			IOP480 (PPC401)
+	APC405			PPC405GP
+	AR405			PPC405GP
+	ASH405			PPC405EP
+	CANBT			PPC405CR
+	CPCI2DP			PPC405GP
+	CPCI405			PPC405GP
+	CPCI4052		PPC405GP
+	CPCI405AB		PPC405GP
+	CPCI405DT		PPC405GP
+	CPCI440			PPC440GP
+	CPCIISER4		PPC405GP
+	DASA_SIM		IOP480 (PPC401)
+	DP405			PPC405EP
+	DU405			PPC405GP
+	G2000			PPC405EP
+	HH405			PPC405EP
+	HUB405			PPC405EP
+	OCRTC			PPC405GP
+	ORSG			PPC405GP
+	PCI405			PPC405GP
+	PLU405			PPC405EP
+	PMC405			PPC405GP
+	VOH405			PPC405EP
+	VOM405			PPC405EP
+	WUH405			PPC405EP
+	CMS700                  PPC405EP
+
 Frank Gottschling <fgottschling@eltec.de>
 
 	MHPC			MPC8xx
@@ -143,16 +178,12 @@ Howard Gray <mvsensor@matrix-vision.de>
 
 	MVS1			MPC823
 
-Bill Hargen <Bill_Hargen@Jabil.com>
-
-	BUBINGA405EP		PPC405EP
-
 Klaus Heydeck <heydeck@kieback-peter.de>
 
 	KUP4K			MPC855
 	KUP4X			MPC859
 
-Murray Jensen <Murray.Jensen@cmst.csiro.au>
+Murray Jensen <Murray.Jensen@csiro.au>
 
 	cogent_mpc8xx		MPC8xx
 
@@ -167,10 +198,6 @@ Sangmoon Kim <dogoil@etinsys.com>
 
 	debris			MPC8245
 
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
 Thomas Lange <thomas@corelatus.se>
 
 	GTH			MPC860
@@ -179,6 +206,22 @@ The LEOX team <team@leox.org>
 
 	ELPT860			MPC860T
 
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+	STxXTc			MPC8xx
+
 Eran Man <eran@nbase.co.il>
 
 	EVB64260_750CX		MPC750CX
@@ -192,14 +235,15 @@ Reinhard Meyer <r.meyer@emk-elektronik.de>
 	TOP860			MPC860T
 	TOP5200			MPC5200
 
-Scott McNutt <smcnutt@artesyncp.com>
-
-	EBONY			PPC440GP
-
 Tolunay Orkun <torkun@nextio.com>
+
 	csb272			PPC405GP
 	csb472			PPC405GP
 
+John Otken <jotken@softadvances.com>
+
+	luan			PPC440SP
+
 Keith Outwater <Keith_Outwater@mvis.com>
 
 	GEN860T			MPC860T
@@ -209,37 +253,50 @@ Frank Panno <fpanno@delphintech.com>
 
 	ep8260			MPC8260
 
+Peter Pearse <peter.pearse@arm.com>
+	integratorcp		All current ARM supplied &
+				supported core modules
+				- see http://www.arm.com
+				/products/DevTools
+				/Hardware_Platforms.html
+	versatile		ARM926EJ-S
+	versatile		ARM926EJ-S
+
 Denis Peter <d.peter@mpl.ch>
 
 	MIP405			PPC4xx
 	PIP405			PPC4xx
 
-Stefan Roese <stefan.roese@esd-electronics.com>
+Daniel Poirot <dan.poirot@windriver.com>
 
-	ADCIOP			IOP480 (PPC401)
-	AR405			PPC405GP
-	ASH405			PPC405EP
-	CANBT			PPC405CR
-	CPCI405			PPC405GP
-	CPCI4052		PPC405GP
-	CPCI405AB		PPC405GP
-	CPCI440			PPC440GP
-	CPCIISER4		PPC405GP
-	DASA_SIM		IOP480 (PPC401)
-	DP405			PPC405EP
-	DU405			PPC405GP
-	HUB405			PPC405EP
-	OCRTC			PPC405GP
-	ORSG			PPC405GP
-	PCI405			PPC405GP
-	PLU405			PPC405EP
-	PMC405			PPC405GP
-	VOH405			PPC405EP
+	sbc8240			MPC8240
+	sbc405			PPC405GP
+
+Stefan Roese <sr@denx.de>
+
+	uc100			MPC857
+
+	TQM85xx			MPC8540/8541/8555/8560
+
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	p3p440			PPC440GP
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245
 
 Travis Sawyer (travis.sawyer@sandburst.com>
 
+	KAREF			PPC440GX
+	METROBOX		PPC440GX
 	XPEDITE1K		PPC440GX
-	OCOTEA			PPC440GX
 
 Peter De Schrijver <p2@mind.be>
 
@@ -272,15 +329,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -299,7 +347,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
@@ -316,6 +363,22 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rowel Atienza <rowel@diwalabs.com>
+
+	armadillo		ARM720T
+
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
+Cliff Brake <cliff.brake@gmail.com>
+
+	pxa255_idp		xscale
+
+Rick Bronson <rick@efn.org>
+
+	AT91RM9200DK		at91rm9200
+
 George G. Davis <gdavis@mvista.com>
 
 	assabet			SA1100
@@ -334,6 +397,11 @@ Marius Gr
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)
 
+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>
 
 	lubbock			xscale
@@ -345,25 +413,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2		ARM926EJS
 
-Rishi Bhattacharya <rishi@ti.com>
+Prakash Kumar <prakash@embedx.com>
 
-	omap5912osk		ARM926EJS
+	cerf250			xscale
 
 David Müller <d.mueller@elsoft.ch>
 
@@ -374,6 +430,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon			SA1100
 
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
@@ -381,7 +441,17 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 
 Andrea Scian <andrea.scian@dave-tech.it>
 
-	B2				ARM7TDMI (S3C44B0X)
+	B2			ARM7TDMI (S3C44B0X)
+
+Greg Ungerer <greg.ungerer@opengear.com>
+
+	cm4008			ks8695p
+	cm4116			ks8695p
+	cm4148			ks8695p
+
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS
 
 Alex Züpke <azu@sysgo.de>
 
@@ -430,6 +500,18 @@ Scott McNutt <smcnutt@psyent.com>
 
 	DK1C20			Nios-32
 
+#########################################################################
+# Nios-II Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Scott McNutt <smcnutt@psyent.com>
+
+	PCI5441			Nios-II
+	PK1C20			Nios-II
+
 #########################################################################
 # MicroBlaze Systems:							#
 #									#
@@ -441,6 +523,17 @@ Yasushi Shoji <yashi@atmark-techno.com>
 
 	SUZAKU			MicroBlaze
 
+#########################################################################
+# Coldfire Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board			CPU					#
+#########################################################################
+
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+	TASREG			MCF5249
+
 #########################################################################
 # End of MAINTAINERS list						#
 #########################################################################

MAKEALL

@@ -25,8 +25,10 @@ LIST_5xx="	\
 #########################################################################
 
 LIST_5xxx="	\
-	icecube_5100	icecube_5200	EVAL5200	PM520		\
-	Total5100	Total5200	Total5200_Rev2	TQM5200_AA	\
+	cpci5200	EVAL5200	icecube_5100	icecube_5200	\
+	lite5200b	mcc200		o2dnt		pf5200		\
+	PM520		Total5100	Total5200	Total5200_Rev2	\
+	TQM5200_auto							\
 "
 
 #########################################################################
@@ -34,23 +36,25 @@ LIST_5xxx="	\
 #########################################################################
 
 LIST_8xx="	\
-	Adder87x	GENIETV		MBX860T		RBC823		\
-	AdderII		GTH		MHPC		rmu		\
-	ADS860		hermes		MPC86xADS	RPXClassic	\
-	AMX860		IAD210		MPC885ADS	RPXlite		\
-	c2mon		ICU862_100MHz	MVS1		RPXlite_DW	\
-	CCM		IP860		NETPHONE	RRvision	\
-	cogent_mpc8xx	IVML24		NETTA		SM850		\
-	ELPT860		IVML24_128	NETTA2		SPD823TS	\
-	ESTEEM192E	IVML24_256	NETTA_ISDN	svm_sc8xx	\
-	ETX094		IVMS8		NETVIA		SXNI855T	\
-	FADS823		IVMS8_128	NETVIA_V2	TOP860		\
-	FADS850SAR	IVMS8_256	NX823		TQM823L		\
-	FADS860T	KUP4K		pcu_e		TQM823L_LCD	\
-	FLAGADM		KUP4X		QS823		TQM850L		\
-	FPS850L		LANTEC		QS850		TQM855L		\
-	GEN860T		lwmon		QS860T		TQM860L		\
-	GEN860T_SC	MBX		R360MPI		v37		\
+	Adder87x	GENIETV		MBX860T		R360MPI		\
+	AdderII		GTH		MHPC		RBC823		\
+	ADS860		hermes		MPC86xADS	rmu		\
+	AMX860		IAD210		MPC885ADS	RPXClassic	\
+	c2mon		ICU862_100MHz	MVS1		RPXlite		\
+	CCM		IP860		NETPHONE	RPXlite_DW	\
+	cogent_mpc8xx	IVML24		NETTA		RRvision	\
+	ELPT860		IVML24_128	NETTA2		SM850		\
+	EP88x		IVML24_256	NETTA_ISDN	SPD823TS	\
+	ESTEEM192E	IVMS8		NETVIA		svm_sc8xx	\
+	ETX094		IVMS8_128	NETVIA_V2	SXNI855T	\
+	FADS823		IVMS8_256	NX823		TOP860		\
+	FADS850SAR	KUP4K		pcu_e		TQM823L		\
+	FADS860T	KUP4X		QS823		TQM823L_LCD	\
+	FLAGADM		LANTEC		QS850		TQM850L		\
+	FPS850L		lwmon		QS860T		TQM855L		\
+	GEN860T		MBX		quantum		TQM860L		\
+	GEN860T_SC					uc100		\
+							v37		\
 "
 
 #########################################################################
@@ -58,16 +62,28 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
-	CANBT		CPCI405		CPCI4052	CPCI405AB	\
+	ADCIOP		AP1000		AR405		ASH405		\
+	bubinga		CANBT		CMS700		CPCI2DP		\
+	CPCI405		CPCI4052	CPCI405AB	CPCI405DT	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
-	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
-	PCI405		PIP405		PLU405		PMC405		\
-	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	XPEDITE1K					\
+	ebony		ERIC		EXBITGEN	G2000		\
+	HH405		HUB405		JSE		KAREF		\
+	luan		METROBOX	MIP405		MIP405T		\
+	ML2		ml300		ocotea		OCRTC		\
+	ORSG		p3p440		PCI405		PIP405		\
+	PLU405		PMC405	        PPChameleonEVB	sbc405		\
+	VOH405		VOM405          W7OLMC		W7OLMG		\
+	walnut		WUH405		XPEDITE1K	yellowstone	\
+	yosemite							\
+"
+
+#########################################################################
+## MPC8220 Systems
+#########################################################################
+
+LIST_8220="	\
+	Alaska8220	Yukon8220					\
 "
 
 #########################################################################
@@ -75,10 +91,11 @@ LIST_4xx="	\
 #########################################################################
 
 LIST_824x="	\
-	A3000		BMW		CPC45		CU824		\
-	debris		eXalion		MOUSSE		MUSENKI		\
-	MVBLUE		OXC		PN62		Sandpoint8240	\
-	Sandpoint8245	SL8245		utx8245		sbc8240	\
+	A3000		barco		BMW		CPC45		\
+	CU824		debris		eXalion		HIDDEN_DRAGON	\
+	MOUSSE		MUSENKI		MVBLUE		OXC		\
+	PN62		Sandpoint8240	Sandpoint8245	sbc8240		\
+	SL8245		utx8245						\
 "
 
 #########################################################################
@@ -86,20 +103,33 @@ LIST_824x="	\
 #########################################################################
 
 LIST_8260="	\
-	atc		cogent_mpc8260	CPU86		ep8260		\
-	gw8260		hymod		IPHASE4539	ISPAN		\
-	MPC8260ADS	MPC8266ADS	MPC8272ADS	PM826		\
-	PM828		ppmc8260	PQ2FADS		RPXsuper	\
-	rsdproto	sacsng		sbc8260		SCM		\
-	TQM8260_AC	TQM8260_AD	TQM8260_AE	ZPC1900		\
+	atc		cogent_mpc8260	CPU86		CPU87		\
+	ep8248		ep8260		gw8260		hymod		\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
+	TQM8260_AE	ZPC1900						\
 "
 
+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="	\
+	MPC8349ADS	TQM834x		MPC8349EMDS			\
+"
+
+
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################
 
 LIST_85xx="	\
-	MPC8540ADS	MPC8560ADS	sbc8560		stxgp3		\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
+	TQM8541		TQM8555		TQM8560				\
 "
 
 #########################################################################
@@ -112,14 +142,15 @@ LIST_74xx="	\
 "
 
 LIST_7xx="	\
-	BAB7xx		ELPPC						\
+	BAB7xx		CPCI750		ELPPC				\
 "
 
-LIST_ppc="${LIST_5xx}  ${LIST_5xxx} \
-	  ${LIST_8xx}  \
-	  ${LIST_824x} ${LIST_8260} \
-	  ${LIST_85xx}	\
-	  ${LIST_4xx}		    \
+LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
+	  ${LIST_8xx}				\
+	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+	  ${LIST_83xx}				\
+	  ${LIST_85xx}				\
+	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"
 
 #########################################################################
@@ -132,41 +163,84 @@ LIST_SA="assabet dnp1110 gcplus lart shannon"
 ## ARM7 Systems
 #########################################################################
 
-LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
+LIST_ARM7="	\
+	armadillo	B2		ep7312		evb4510		\
+	impa7		integratorap	ap7		ap720t		\
+	modnet50							\
+"
 
 #########################################################################
 ## ARM9 Systems
 #########################################################################
 
 LIST_ARM9="	\
-	at91rm9200dk	integratorcp	integratorap 	lpd7a400	\
-	mx1ads		mx1fs2		omap1510inn	omap1610h2	\
-	omap1610inn	omap730p2	scb9328		smdk2400	\
-	smdk2410	trab		VCMA9		versatile	\
+	at91rm9200dk	cmc_pu2						\
+	ap920t		ap922_XA10	ap926ejs	ap946es		\
+	ap966		cp920t		cp922_XA10	cp926ejs	\
+	cp946es		cp966		lpd7a400	mp2usb		\
+	mx1ads		mx1fs2		netstar		omap1510inn	\
+	omap1610h2	omap1610inn	omap730p2	scb9328		\
+	smdk2400	smdk2410	trab		VCMA9		\
+	versatile	versatileab	versatilepb	voiceblue
+"
+
+#########################################################################
+## ARM10 Systems
+#########################################################################
+LIST_ARM10="	\
+	integratorcp	cp1026						\
+"
+
+#########################################################################
+## ARM11 Systems
+#########################################################################
+LIST_ARM11="	\
+	cp1136		omap2420h4					\
 "
 
 #########################################################################
 ## Xscale Systems
 #########################################################################
 
-LIST_pxa="cerf250 cradle csb226 innokom lubbock wepep250 xm250 xsengine"
+LIST_pxa="	\
+	adsvix		cerf250		cradle		csb226		\
+	delta		innokom		lubbock		pxa255_idp	\
+	wepep250	xaeniax		xm250		xsengine	\
+	zylonite							\
+"
 
 LIST_ixp="ixdp425"
 
 
-LIST_arm="${LIST_SA} ${LIST_ARM7} ${LIST_ARM9} ${LIST_pxa} ${LIST_ixp}"
+LIST_arm="	\
+	${LIST_SA}							\
+	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM10} ${LIST_ARM11}		\
+	${LIST_pxa} ${LIST_ixp}						\
+"
 
 #########################################################################
-## MIPS Systems
+## MIPS Systems		(default = big endian)
 #########################################################################
 
 LIST_mips4kc="incaip"
 
 LIST_mips5kc="purple"
 
-LIST_au1x00="dbau1000 dbau1100 dbau1500"
+LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
 
-LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1x00}"
+LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
+
+#########################################################################
+## MIPS Systems		(little endian)
+#########################################################################
+
+LIST_mips4kc_el=""
+
+LIST_mips5kc_el=""
+
+LIST_au1xx0_el="dbau1550_el"
+
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
 
 #########################################################################
 ## i386 Systems
@@ -187,6 +261,12 @@ LIST_nios="	\
 	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
 "
 
+#########################################################################
+## Nios-II Systems
+#########################################################################
+
+LIST_nios2="PCI5441 PK1C20"
+
 #########################################################################
 ## MicroBlaze Systems
 #########################################################################
@@ -215,11 +295,11 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|824x|8260|85xx|4xx|7xx|74xx| \
-	arm|SA|ARM7|ARM9|pxa|ixp| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|pxa|ixp| \
 	microblaze| \
-	mips| \
-	nios| \
+	mips|mips_el| \
+	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do

README

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000 - 2004
+# (C) Copyright 2000 - 2005
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -25,9 +25,10 @@ Summary:
 ========
 
 This directory contains the source code for U-Boot, a boot loader for
-Embedded boards based on PowerPC and ARM processors, which can be
-installed in a boot ROM and used to initialize and test the hardware
-or to download and run application code.
+Embedded boards based on PowerPC, ARM, MIPS and several other
+processors, which can be installed in a boot ROM and used to
+initialize and test the hardware or to download and run application
+code.
 
 The development of U-Boot is closely related to Linux: some parts of
 the source code originate in the Linux source tree, we have some
@@ -122,24 +123,29 @@ Directory Hierarchy:
 - board		Board dependent files
 - common	Misc architecture independent functions
 - cpu		CPU specific files
-  - 74xx_7xx	Files specific to Motorola MPC74xx and 7xx CPUs
+  - 74xx_7xx	Files specific to Freescale MPC74xx and 7xx CPUs
   - arm720t	Files specific to ARM 720 CPUs
   - arm920t	Files specific to ARM 920 CPUs
+    - at91rm9200 Files specific to Atmel AT91RM9200 CPU
+    - imx	Files specific to Freescale MC9328 i.MX CPUs
+    - s3c24x0	Files specific to Samsung S3C24X0 CPUs
   - arm925t	Files specific to ARM 925 CPUs
   - arm926ejs	Files specific to ARM 926 CPUs
-  - at91rm9200	Files specific to Atmel AT91RM9200 CPUs
+  - arm1136	Files specific to ARM 1136 CPUs
   - i386	Files specific to i386 CPUs
   - ixp		Files specific to Intel XScale IXP CPUs
-  - mcf52x2	Files specific to Motorola ColdFire MCF52x2 CPUs
+  - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
   - mips	Files specific to MIPS CPUs
-  - mpc5xx	Files specific to Motorola MPC5xx  CPUs
-  - mpc5xxx	Files specific to Motorola MPC5xxx CPUs
-  - mpc8xx	Files specific to Motorola MPC8xx  CPUs
-  - mpc824x	Files specific to Motorola MPC824x CPUs
-  - mpc8260	Files specific to Motorola MPC8260 CPUs
-  - mpc85xx	Files specific to Motorola MPC85xx CPUs
+  - mpc5xx	Files specific to Freescale MPC5xx  CPUs
+  - mpc5xxx	Files specific to Freescale MPC5xxx CPUs
+  - mpc8xx	Files specific to Freescale MPC8xx  CPUs
+  - mpc8220	Files specific to Freescale MPC8220 CPUs
+  - mpc824x	Files specific to Freescale MPC824x CPUs
+  - mpc8260	Files specific to Freescale MPC8260 CPUs
+  - mpc85xx	Files specific to Freescale MPC85xx CPUs
   - nios	Files specific to Altera NIOS CPUs
-  - ppc4xx	Files specific to IBM PowerPC 4xx CPUs
+  - nios2	Files specific to Altera Nios-II CPUs
+  - ppc4xx	Files specific to AMCC PowerPC 4xx CPUs
   - pxa		Files specific to Intel XScale PXA CPUs
   - s3c44b0	Files specific to Samsung S3C44B0 CPUs
   - sa1100	Files specific to Intel StrongARM SA1100 CPUs
@@ -225,6 +231,7 @@ The following options need to be configured:
 		-------------------
 		CONFIG_MPC823,	CONFIG_MPC850,	CONFIG_MPC855,	CONFIG_MPC860
 	or	CONFIG_MPC5xx
+	or	CONFIG_MPC8220
 	or	CONFIG_MPC824X, CONFIG_MPC8260
 	or	CONFIG_MPC85xx
 	or	CONFIG_IOP480
@@ -239,11 +246,16 @@ The following options need to be configured:
 		CONFIG_SA1110
 		CONFIG_ARM7
 		CONFIG_PXA250
+		CONFIG_CPU_MONAHANS
 
 		MicroBlaze based CPUs:
 		----------------------
 		CONFIG_MICROBLAZE
 
+		Nios-2 based CPUs:
+		----------------------
+		CONFIG_NIOS2
+
 
 - Board Type:	Define exactly one of
 
@@ -253,57 +265,64 @@ The following options need to be configured:
 		CONFIG_ADCIOP		CONFIG_GEN860T		CONFIG_PCI405
 		CONFIG_ADS860		CONFIG_GENIETV		CONFIG_PCIPPC2
 		CONFIG_AMX860		CONFIG_GTH		CONFIG_PCIPPC6
-		CONFIG_AR405		CONFIG_gw8260		CONFIG_pcu_e
-		CONFIG_BAB7xx		CONFIG_hermes		CONFIG_PIP405
-		CONFIG_c2mon		CONFIG_hymod		CONFIG_PM826
-		CONFIG_CANBT		CONFIG_IAD210		CONFIG_ppmc8260
-		CONFIG_CCM		CONFIG_ICU862		CONFIG_QS823
-		CONFIG_CMI		CONFIG_IP860		CONFIG_QS850
-		CONFIG_cogent_mpc8260	CONFIG_IPHASE4539	CONFIG_QS860T
-		CONFIG_cogent_mpc8xx	CONFIG_IVML24		CONFIG_RBC823
-		CONFIG_CPCI405		CONFIG_IVML24_128	CONFIG_RPXClassic
-		CONFIG_CPCI4052		CONFIG_IVML24_256	CONFIG_RPXlite
-		CONFIG_CPCIISER4	CONFIG_IVMS8		CONFIG_RPXsuper
-		CONFIG_CPU86		CONFIG_IVMS8_128	CONFIG_rsdproto
-		CONFIG_CRAYL1		CONFIG_IVMS8_256	CONFIG_sacsng
-		CONFIG_CSB272		CONFIG_JSE		CONFIG_Sandpoint8240
-		CONFIG_CU824		CONFIG_LANTEC		CONFIG_Sandpoint8245
-		CONFIG_DASA_SIM		CONFIG_lwmon		CONFIG_sbc8260
-		CONFIG_DB64360		CONFIG_MBX		CONFIG_sbc8560
-		CONFIG_DB64460		CONFIG_MBX860T		CONFIG_SM850
-		CONFIG_DU405		CONFIG_MHPC		CONFIG_SPD823TS
-		CONFIG_DUET_ADS		CONFIG_MIP405		CONFIG_STXGP3
-		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
-		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
-		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_AP1000		CONFIG_gw8260		CONFIG_pcu_e
+		CONFIG_AR405		CONFIG_hermes		CONFIG_PIP405
+		CONFIG_BAB7xx		CONFIG_hymod		CONFIG_PM826
+		CONFIG_c2mon		CONFIG_IAD210		CONFIG_ppmc8260
+		CONFIG_CANBT		CONFIG_ICU862		CONFIG_QS823
+		CONFIG_CCM		CONFIG_IP860		CONFIG_QS850
+		CONFIG_CMI		CONFIG_IPHASE4539	CONFIG_QS860T
+		CONFIG_cogent_mpc8260	CONFIG_IVML24		CONFIG_RBC823
+		CONFIG_cogent_mpc8xx	CONFIG_IVML24_128	CONFIG_RPXClassic
+		CONFIG_CPCI405		CONFIG_IVML24_256	CONFIG_RPXlite
+		CONFIG_CPCI4052		CONFIG_IVMS8		CONFIG_RPXsuper
+		CONFIG_CPCIISER4	CONFIG_IVMS8_128	CONFIG_rsdproto
+		CONFIG_CPU86		CONFIG_IVMS8_256	CONFIG_sacsng
+		CONFIG_CRAYL1		CONFIG_JSE		CONFIG_Sandpoint8240
+		CONFIG_CSB272		CONFIG_LANTEC		CONFIG_Sandpoint8245
+		CONFIG_CU824		CONFIG_LITE5200B	CONFIG_sbc8260
+		CONFIG_DASA_SIM		CONFIG_lwmon		CONFIG_sbc8560
+		CONFIG_DB64360		CONFIG_MBX		CONFIG_SM850
+		CONFIG_DB64460		CONFIG_MBX860T		CONFIG_SPD823TS
+		CONFIG_DU405		CONFIG_MHPC		CONFIG_STXGP3
+		CONFIG_DUET_ADS		CONFIG_MIP405		CONFIG_SXNI855T
+		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_TQM823L
+		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM8260
+		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM850L
+		CONFIG_ep8260		CONFIG_MPC8540EVAL	CONFIG_TQM855L
+		CONFIG_ERIC		CONFIG_MPC8560ADS	CONFIG_TQM860L
+		CONFIG_ESTEEM192E	CONFIG_MUSENKI		CONFIG_TTTech
+		CONFIG_ETX094		CONFIG_MVS1		CONFIG_UTX8245
+		CONFIG_EVB64260		CONFIG_NETPHONE		CONFIG_V37
+		CONFIG_FADS823		CONFIG_NETTA		CONFIG_W7OLMC
+		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMG
+		CONFIG_FADS860T		CONFIG_NX823		CONFIG_WALNUT
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_ZPC1900
+		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZUMA
+		CONFIG_FPS860L		CONFIG_OXC
 
 		ARM based boards:
 		-----------------
 
-		CONFIG_AT91RM9200DK,		CONFIG_CERF250,		CONFIG_DNP1110,
-		CONFIG_EP7312,			CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
-		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
-		CONFIG_LART,			CONFIG_LPD7A400		CONFIG_LUBBOCK,
-		CONFIG_OSK_OMAP5912,		CONFIG_SHANNON,		CONFIG_P2_OMAP730,
-		CONFIG_SMDK2400,		CONFIG_SMDK2410,	CONFIG_TRAB,
-		CONFIG_VCMA9
+		CONFIG_ARMADILLO,	CONFIG_AT91RM9200DK,	CONFIG_CERF250,
+		CONFIG_CSB637,		CONFIG_DELTA,		CONFIG_DNP1110,
+	 	CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_IMPA7,	    CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
+		CONFIG_KB9202,		CONFIG_LART,		CONFIG_LPD7A400,
+		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
+		CONFIG_SHANNON,		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
+		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9
 
 		MicroBlaze based boards:
 		------------------------
 
 		CONFIG_SUZAKU
 
+		Nios-2 based boards:
+		------------------------
+
+		CONFIG_PCI5441 CONFIG_PK1C20
+
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
 		Define exactly one of
@@ -339,16 +358,17 @@ The following options need to be configured:
 		CONFIG_MPC8240, CONFIG_MPC8245
 
 - 8xx CPU Options: (if using an MPC8xx cpu)
-		Define one or more of
-		CONFIG_8xx_GCLK_FREQ	- if get_gclk_freq() cannot work
+		CONFIG_8xx_GCLK_FREQ	- deprecated: CPU clock if
+					  get_gclk_freq() cannot work
 					  e.g. if there is no 32KHz
 					  reference PIT/RTC clock
+		CONFIG_8xx_OSCLK	- PLL input clock (either EXTCLK
+					  or XTAL/EXTAL)
 
-- 859/866 CPU options: (if using a MPC859 or MPC866 CPU):
-		CFG_866_OSCCLK
-		CFG_866_CPUCLK_MIN
-		CFG_866_CPUCLK_MAX
-		CFG_866_CPUCLK_DEFAULT
+- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU):
+		CFG_8xx_CPUCLK_MIN
+		CFG_8xx_CPUCLK_MAX
+		CONFIG_8xx_CPUCLK_DEFAULT
 			See doc/README.MPC866
 
 		CFG_MEASURE_CPUCLK
@@ -358,7 +378,21 @@ The following options need to be configured:
 		values. Mostly useful for board bringup to make sure
 		the PLL is locked at the intended frequency. Note
 		that this requires a (stable) reference clock (32 kHz
-		RTC clock),
+		RTC clock or CFG_8XX_XIN)
+
+- Intel Monahans options:
+		CFG_MONAHANS_RUN_MODE_OSC_RATIO
+
+		Defines the Monahans run mode to oscillator
+		ratio. Valid values are 8, 16, 24, 31. The core
+		frequency is this value multiplied by 13 MHz.
+
+		CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+
+		Defines the Monahans turbo mode to oscillator
+		ratio. Valid values are 1 (default if undefined) and
+		2. The core frequency as calculated above is multiplied
+		by this value.
 
 - Linux Kernel Interface:
 		CONFIG_CLOCKS_IN_MHZ
@@ -380,6 +414,37 @@ The following options need to be configured:
 		expect it to be in bytes, others in MB.
 		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
 
+		CONFIG_OF_FLAT_TREE
+
+		New kernel versions are expecting firmware settings to be
+		passed using flat open firmware trees.
+		The environment variable "disable_of", when set, disables this
+		functionality.
+
+		CONFIG_OF_FLAT_TREE_MAX_SIZE
+
+		The maximum size of the constructed OF tree.
+
+		OF_CPU - The proper name of the cpus node.
+		OF_SOC - The proper name of the soc node.
+		OF_TBCLK - The timebase frequency.
+		OF_STDOUT_PATH - The path to the console device
+
+		CONFIG_OF_HAS_BD_T
+
+		The resulting flat device tree will have a copy of the bd_t.
+		Space should be pre-allocated in the dts for the bd_t.
+
+		CONFIG_OF_HAS_UBOOT_ENV
+
+		The resulting flat device tree will have a copy of u-boot's
+		environment variables
+
+		CONFIG_OF_BOARD_SETUP
+
+		Board code has addition modification that it wants to make
+		to the flat device tree before handing it off to the kernel
+
 - Serial Ports:
 		CFG_PL010_SERIAL
 
@@ -480,7 +545,7 @@ The following options need to be configured:
 - Console UART Number:
 		CONFIG_UART1_CONSOLE
 
-		IBM PPC4xx only.
+		AMCC PPC4xx only.
 		If defined internal UART1 (and not UART0) is used
 		as default U-Boot console.
 
@@ -573,7 +638,7 @@ The following options need to be configured:
 		CFG_CMD_DIAG	* Diagnostics
 		CFG_CMD_DOC	* Disk-On-Chip Support
 		CFG_CMD_DTT	* Digital Therm and Thermostat
-		CFG_CMD_ECHO	* echo arguments
+		CFG_CMD_ECHO	  echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
 		CFG_CMD_ELF	* bootelf, bootvx
 		CFG_CMD_ENV	  saveenv
@@ -610,6 +675,7 @@ The following options need to be configured:
 		CFG_CMD_SAVES	* save S record dump
 		CFG_CMD_SCSI	* SCSI Support
 		CFG_CMD_SDRAM	* print SDRAM configuration information
+				  (requires CFG_CMD_I2C)
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
@@ -784,7 +850,7 @@ The following options need to be configured:
 		supported (PIP405, MIP405, MPC5200); define
 		CONFIG_USB_UHCI to enable it.
 		define CONFIG_USB_KEYBOARD to enable the USB Keyboard
-		end define CONFIG_USB_STORAGE to enable the USB
+		and define CONFIG_USB_STORAGE to enable the USB
 		storage devices.
 		Note:
 		Supported are USB Keyboards and USB Floppy drives
@@ -819,7 +885,7 @@ The following options need to be configured:
 		function struct part_info* jffs2_part_info(int part_num)
 
 		If you define only one JFFS2 partition you may also want to
-		#define CFG_JFFS_SINGLE_PART    1
+		#define CFG_JFFS_SINGLE_PART	1
 		to disable the command chpart. This is the default when you
 		have not defined a custom partition
 
@@ -942,6 +1008,12 @@ The following options need to be configured:
 		allows for a "silent" boot where a splash screen is
 		loaded very quickly after power-on.
 
+- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
+
+		If this option is set, additionally to standard BMP
+		images, gzipped BMP images can be displayed via the
+		splashscreen support or the bmp command.
+
 - Compression support:
 		CONFIG_BZIP2
 
@@ -1337,7 +1409,7 @@ The following options need to be configured:
 		remaining RAM in a form that can be passed as boot
 		argument to Linux, for instance like that:
 
-			setenv bootargs ... mem=\$(mem)
+			setenv bootargs ... mem=\${mem}
 			saveenv
 
 		This way you can tell Linux not to use this memory,
@@ -1463,6 +1535,26 @@ The following options need to be configured:
 		When SystemACE support is added, the "ace" device type
 		becomes available to the fat commands, i.e. fatls.
 
+- TFTP Fixed UDP Port:
+		CONFIG_TFTP_PORT
+
+		If this is defined, the environment variable tftpsrcp
+		is used to supply the TFTP UDP source port value.
+		If tftpsrcp isn't defined, the normal pseudo-random port
+		number generator is used.
+
+		Also, the environment variable tftpdstp is used to supply
+		the TFTP UDP destination port value.  If tftpdstp isn't
+		defined, the normal port 69 is used.
+
+		The purpose for tftpsrcp is to allow a TFTP server to
+		blindly start the TFTP transfer using the pre-configured
+		target IP address and UDP port. This has the effect of
+		"punching through" the (Windows XP) firewall, allowing
+		the remainder of the TFTP transfer to proceed normally.
+		A better solution is to properly configure the firewall,
+		but sometimes that is not allowed.
+
 - Show boot progress:
 		CONFIG_SHOW_BOOT_PROGRESS
 
@@ -1657,6 +1749,12 @@ Configuration Settings:
 - CFG_MALLOC_LEN:
 		Size of DRAM reserved for malloc() use.
 
+- CFG_BOOTM_LEN:
+		Normally compressed uImages are limited to an
+		uncompressed size of 8 MBytes. If this is not enough,
+		you can define CFG_BOOTM_LEN in your board config file
+		to adjust this setting to your needs.
+
 - CFG_BOOTMAPSZ:
 		Maximum size of memory mapped by the startup code of
 		the Linux kernel; all data that must be processed by
@@ -1706,6 +1804,12 @@ Configuration Settings:
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory
 
+- CFG_FLASH_QUIET_TEST
+		If this option is defined, the common CFI flash doesn't
+		print it's warning upon not recognized FLASH banks. This
+		is useful, if some of the configured banks are only
+		optionally available.
+
 - CFG_RX_ETH_BUFFER:
 		Defines the number of ethernet receive buffers. On some
 		ethernet controllers it is recommended to set this value
@@ -1880,6 +1984,17 @@ to save the current settings.
 	  These two #defines specify the offset and size of the environment
 	  area within the first NAND device.
 
+	- CFG_ENV_OFFSET_REDUND
+
+	  This setting describes a second storage area of CFG_ENV_SIZE
+	  size used to hold a redundant copy of the environment data,
+	  so that there is a valid backup copy in case there is a
+	  power failure during a "saveenv" operation.
+
+	Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
+	to a block boundary, and CFG_ENV_SIZE must be a multiple of
+	the NAND devices block size.
+
 - CFG_SPI_INIT_OFFSET
 
 	Defines offset to the initial SPI buffer area in DPRAM. The
@@ -1961,9 +2076,9 @@ Low Level (hardware related) configuration options:
 		source code. It is used to make hardware dependant
 		initializations.
 
-- CFG_IMMR:	Physical address of the Internal Memory Mapped
-		Register; DO NOT CHANGE! (11-4)
-		[MPC8xx systems only]
+- CFG_IMMR:	Physical address of the Internal Memory.
+		DO NOT CHANGE unless you know exactly what you're
+		doing! (11-4) [MPC8xx/82xx systems only]
 
 - CFG_INIT_RAM_ADDR:
 
@@ -2097,6 +2212,33 @@ Low Level (hardware related) configuration options:
 		Add the "loopw" memory command. This only takes effect if
 		the memory commands are activated globally (CFG_CMD_MEM).
 
+- CONFIG_MX_CYCLIC
+		Add the "mdc" and "mwc" memory commands. These are cyclic
+		"md/mw" commands.
+		Examples:
+
+		=> mdc.b 10 4 500
+		This command will print 4 bytes (10,11,12,13) each 500 ms.
+
+		=> mwc.l 100 12345678 10
+		This command will write 12345678 to address 100 all 10 ms.
+
+		This only takes effect if the memory commands are activated
+		globally (CFG_CMD_MEM).
+
+- CONFIG_SKIP_LOWLEVEL_INIT
+- CONFIG_SKIP_RELOCATE_UBOOT
+
+		[ARM only] If these variables are defined, then
+		certain low level initializations (like setting up
+		the memory controller) are omitted and/or U-Boot does
+		not relocate itself into RAM.
+		Normally these variables MUST NOT be defined. The
+		only exception is when U-Boot is loaded (to RAM) by
+		some other boot loader or by a debugger which
+		performs these intializations itself.
+
+
 Building the Software:
 ======================
 
@@ -2126,6 +2268,7 @@ configurations; the following names are supported:
 
 	ADCIOP_config		FPS860L_config		omap730p2_config
 	ADS860_config		GEN860T_config		pcu_e_config
+	Alaska8220_config
 	AR405_config		GENIETV_config		PIP405_config
 	at91rm9200dk_config	GTH_config		QS823_config
 	CANBT_config		hermes_config		QS850_config
@@ -2140,13 +2283,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
-							WALNUT405_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
+	FADS823_config		NETVIA_config		TQM823L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
+				omap5912osk_config	walnut_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
@@ -2399,6 +2543,12 @@ Some configuration options can be set using Environment Variables:
 		  Useful on scripts which control the retry operation
 		  themselves.
 
+  tftpsrcport	- If this is set, the value is used for TFTP's
+		  UDP source port.
+
+  tftpdstport	- If this is set, the value is used for TFTP's UDP
+		  destination port instead of the Well Know Port 69.
+
    vlan		- When set to a value < 4095 the traffic over
 		  ethernet is encapsulated/received over 802.1q
 		  VLAN tagged frames.
@@ -2451,10 +2601,10 @@ Old, simple command line parser:
 
 - supports environment variables (through setenv / saveenv commands)
 - several commands on one line, separated by ';'
-- variable substitution using "... $(name) ..." syntax
+- variable substitution using "... ${name} ..." syntax
 - special characters ('$', ';') can be escaped by prefixing with '\',
   for example:
-	setenv bootcmd bootm \$(address)
+	setenv bootcmd bootm \${address}
 - You can also escape text by enclosing in single apostrophes, for example:
 	setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
 
@@ -3034,8 +3184,7 @@ Booting assumes that (the first part of) the image booted is a
 stage-2 loader which in turn loads and then invokes the kernel
 proper. Loader sources will eventually appear in the NetBSD source
 tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the
-meantime, send mail to bruno@exet-ag.de and/or wd@denx.de for
-details.
+meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz
 
 
 Implementation Internals:
@@ -3089,7 +3238,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in
@@ -3160,6 +3309,8 @@ On ARM, the following registers are used:
 
     ==> U-Boot will use R8 to hold a pointer to the global data
 
+NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
+or current versions of GCC may "optimize" the code too much.
 
 Memory Management:
 ------------------
@@ -3335,6 +3486,7 @@ Since the number of patches for U-Boot is growing, we need to
 establish some rules. Submissions which do not conform to these rules
 may be rejected, even when they contain important and valuable stuff.
 
+Patches shall be sent to the u-boot-users mailing list.
 
 When you send a patch, please include the following information with
 it:
@@ -3392,3 +3544,6 @@ Notes:
   (using #ifdef), and the resulting code with the new feature
   disabled must not need more memory than the old code without your
   modification.
+
+* Remember that there is a size limit of 40 kB per message on the
+  u-boot-users mailing list. Compression may help.

blackfin_config.mk

@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000-2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__blackfin__

board/AtmarkTechno/suzaku/u-boot.lds

@@ -51,6 +51,7 @@ SECTIONS
 
 	.u_boot_cmd ALIGN(0x4):
 	{
+		. = .;
 		__u_boot_cmd_start = .;
 		*(.u_boot_cmd)
 		__u_boot_cmd_end = .;

board/LEOX/elpt860/README.LEOX

@@ -124,9 +124,9 @@ nfsserverip=192.168.0.1
 preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo
 gatewayip=192.168.0.1
 ramargs=setenv bootargs root=/dev/ram rw
-rootargs=setenv rootpath /tftp/$(ipaddr)
-nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsserverip):$(rootpath)
-addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsserverip):$(gatewayip):$(netmask):$(hostname):eth0:
+rootargs=setenv rootpath /tftp/${ipaddr}
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${nfsserverip}:${rootpath}
+addip=setenv bootargs ${bootargs} ip=${ipaddr}:${nfsserverip}:${gatewayip}:${netmask}:${hostname}:eth0:
 ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm
 nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm
 bootcmd=run ramboot

board/LEOX/elpt860/elpt860.c

@@ -169,7 +169,7 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	unsigned char *s = getenv ("serial#");
+	char *s = getenv ("serial#");
 
 	if (!s || strncmp (s, "ELPT860", 7))
 		printf ("### No HW ID - assuming ELPT860\n");
@@ -253,7 +253,7 @@ long int initdram (int board_type)
 	 * try 8 column mode
 	 */
 	size8 = dram_size (CFG_MAMR_8COL,
-			   (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
@@ -261,7 +261,7 @@ long int initdram (int board_type)
 	 * try 9 column mode
 	 */
 	size9 = dram_size (CFG_MAMR_9COL,
-			   (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {	/* leave configuration at 9 columns       */
 		size_b0 = size9;

board/LEOX/elpt860/u-boot.lds

@@ -91,6 +91,7 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -123,10 +124,12 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;

board/LEOX/elpt860/u-boot.lds.debug

@@ -83,6 +83,8 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/MAI/AmigaOneG3SE/AmigaOneG3SE.c

@@ -1,6 +1,7 @@
 /*
  * (C) Copyright 2002
  * Hyperion Entertainment, ThomasF@hyperion-entertainment.com
+ * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -88,8 +89,6 @@ long initdram (int board_type)
 
 void after_reloc (ulong dest_addr, gd_t *gd)
 {
-/* HJF:	DECLARE_GLOBAL_DATA_PTR; */
-
 	board_init_r (gd, dest_addr);
 }
 

board/MAI/AmigaOneG3SE/articiaS.c

@@ -29,6 +29,8 @@
 #include "smbus.h"
 #include "via686.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef DEBUG
 
 struct dimm_bank {
@@ -82,7 +84,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte)
 
 long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks)
 {
-    DECLARE_GLOBAL_DATA_PTR;
 	int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR;
 	uint32 busclock = gd->bus_clk;
 	uint32 memclock = busclock;
@@ -394,8 +395,6 @@ uint32 burst_to_len (uint32 support)
 
 long articiaS_ram_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	register uint32 i;
 	register uint32 value1;
 	register uint32 value2;

board/MAI/AmigaOneG3SE/articiaS_pci.c

@@ -26,6 +26,8 @@
 #include "memio.h"
 #include "articiaS.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef ARTICIA_PCI_DEBUG
 
 #ifdef  ARTICIA_PCI_DEBUG
@@ -493,8 +495,6 @@ pci_dev_t video_dev;
 
 int articiaS_init_vga (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
     extern void shutdown_bios(void);
     pci_dev_t dev = ~0;
     int busnr = 0;

board/MAI/AmigaOneG3SE/cmd_boota.c

@@ -3,6 +3,7 @@
 #include "../disk/part_amiga.h"
 #include <asm/cache.h>
 
+DECLARE_GLOBAL_DATA_PTR;
 
 #undef BOOTA_DEBUG
 
@@ -108,8 +109,6 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	s = getenv ("autostart");
 	if (s && strcmp (s, "yes") == 0) {
-		DECLARE_GLOBAL_DATA_PTR;
-
 		void (*boot) (bd_t *, char *, block_dev_desc_t *);
 		char *args;
 

board/MAI/AmigaOneG3SE/ps2kbd.c

@@ -656,7 +656,7 @@ char * kbd_initialize(void)
 			      | KBD_MODE_DISABLE_MOUSE
 			      | KBD_MODE_KCC);
 
-	/* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+	/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
 	kbd_write_command_w(KBD_CCMD_READ_MODE);
 	if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
 		/*

board/MAI/AmigaOneG3SE/serial.c

@@ -4,6 +4,8 @@
 #include "memio.h"
 #include "articiaS.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifndef CFG_NS16550
 static uint32 ComPort1;
 
@@ -150,8 +152,6 @@ const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2;
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint32 clock_divisor = 115200 / gd->baudrate;
 
 	NS16550_init (Com0, clock_divisor);
@@ -239,8 +239,6 @@ void serial_puts (const char *string)
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	uint32 clock_divisor = 115200 / gd->baudrate;
 
 	NS16550_init (Com0, clock_divisor);

board/MAI/AmigaOneG3SE/u-boot.lds

@@ -76,6 +76,7 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -108,11 +109,13 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;

board/MAI/AmigaOneG3SE/via686.c

@@ -28,6 +28,8 @@
 #include "via686.h"
 #include "i8259.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef VIA_DEBUG
 
 #ifdef  VIA_DEBUG
@@ -226,33 +228,31 @@ __asm         ("    .globl via_calibrate_time_base \n"
 
 extern unsigned long via_calibrate_time_base(void);
 
-void via_calibrate_bus_freq(void)
+void via_calibrate_bus_freq (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
+	unsigned long tb;
 
-    unsigned long tb;
+	/* This is 20 microseconds */
+#define CALIBRATE_TIME 28636
 
-    /* This is 20 microseconds */
-    #define CALIBRATE_TIME 28636
+	/* Enable the timer (and disable speaker) */
+	unsigned char c;
 
+	c = in_byte (0x61);
+	out_byte (0x61, ((c & ~0x02) | 0x01));
 
-    /* Enable the timer (and disable speaker) */
-    unsigned char c;
-    c = in_byte(0x61);
-    out_byte(0x61, ((c & ~0x02) | 0x01));
+	/* Set timer 2 to low/high writing */
+	out_byte (0x43, 0xb0);
+	out_byte (0x42, CALIBRATE_TIME & 0xff);
+	out_byte (0x42, CALIBRATE_TIME >> 8);
 
-    /* Set timer 2 to low/high writing */
-    out_byte(0x43, 0xb0);
-    out_byte(0x42, CALIBRATE_TIME & 0xff);
-    out_byte(0x42, CALIBRATE_TIME >>8);
+	/* Read the time base */
+	tb = via_calibrate_time_base ();
 
-    /* Read the time base */
-    tb = via_calibrate_time_base();
-
-    if (tb >= 700000)
-	gd->bus_clk = 133333333;
-    else
-	gd->bus_clk = 100000000;
+	if (tb >= 700000)
+		gd->bus_clk = 133333333;
+	else
+		gd->bus_clk = 100000000;
 
 }
 

board/MAI/AmigaOneG3SE/video.c

@@ -26,6 +26,8 @@
 #include "memio.h"
 #include <part.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 unsigned char *cursor_position;
 unsigned int cursor_row;
 unsigned int cursor_col;
@@ -480,7 +482,6 @@ extern char version_string[];
 void video_banner(void)
 {
     block_dev_desc_t *ide;
-    DECLARE_GLOBAL_DATA_PTR;
     int i;
     char *s;
     int maxdev;