The AMD Versal Gen 2 PCIe host controller places its DBI registers
(0x100000000000, 1 MB) and config space (0x100000100000, 255 MB)
above 1 TB. Without MMU entries covering these ranges, U-Boot faults
when the PCIe driver accesses them.
The two regions are merged into a single entry as these are
contiguous and share identical MMU attributes. Add this
entry under a CONFIG_IS_ENABLED(PCIE_DW_AMD) guard so it is only
included when the PCIe driver is configured. VERSAL2_MEM_MAP_USED is
adjusted from 5 to 6 accordingly, keeping the DRAM bank index correct.
Signed-off-by: Pranav Sanwal <pranav.sanwal@amd.com>
Link: https://lore.kernel.org/r/20260327121015.996806-3-pranav.sanwal@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Switch the Phanbell i.MX8MQ SPL to full Driver Model (DM) boot flow by
moving early device initialization into devicetree and enabling the
required SPL DM subsystems.
Mark GPIO, USDHC, pinctrl, and regulator nodes with bootph-pre-ram so
they are available during SPL. With DM handling MMC and power rails,
remove legacy board-specific USDHC, GPIO, and pad setup code from SPL.
Update the SPL initialization sequence to use spl_early_init(), clears
BSS earlier, and explicitly enables USDHC clocks before handing off to
board_init_r().
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Migrate the Kontron PITX-IMX8M board from the legacy power framework
to the DM PMIC infrastructure.
The SPL power initialization is converted to use DM_PMIC_PFUZE100,
dropping all legacy I2C, GPIO, pinmux, and MMC setup code that is
now handled through the device tree and driver model instead.
Key changes:
- Switch PFUZE100 access to DM PMIC APIs
- Enable SPL OF_CONTROL and mark required nodes with bootph*
- Remove legacy I2C and power configuration
- Enable SPL DM, pinctrl, regulator, and PMIC support
- Adjust SPL stack placement for DM usage
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Migrate the i.MX8MQ EVK board to the Driver Model (DM) PMIC framework.
This replaces legacy PMIC handling with DM_PMIC and enables proper
device-model support during SPL.
As part of this transition, enable CONFIG_SPL_DM and the required
DM subsystems such as I2C, PINCTRL, MMC, GPIO, and regulators so the
SPL boot flow continues to work correctly.
Board-specific SPL code is simplified accordingly by removing legacy
I2C, USDHC, and PMIC handling, relying instead on device tree
descriptions and DM drivers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
signed_hdmi_imx8m.bin is already signed and has a IVT header. It should not
be put in u-boot-spl-mkimage.signed.bin. Move it to head of flash.bin
following NXP imx-mkimage. Keeping it in u-boot-spl-mkimage.signed.bin also
consumes a lot of TCM space which is not expected.
While moving it to head of flash.bin, other changes are required,
u-boot.itb is put at sector 768 per defconfig, so u-boot.itb binman
offset should be updated and it should be moved out from binman section.
Also binman symbol address are updated, so need to subtract u-boot-spl
image_pos + CONFIG_SPL_TEXT_BASE to find the correct location of ddr phy
firmware.
Because there is 1KB padding in HDMI firmware, use 32KB when burning
flash.bin to sd card.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Instead of adding select ARCH_MISC_INIT for each i.MX 9x SoC, select it
at the i.MX9 family Kconfig level. The corresponding arch_misc_init() is
already defined in the common arch/arm/mach-imx/imx9/soc.c file and will
print out ELE firmware BuildInfo for all i.MX9 SoCs now instead of just
i.MX91 and i.MX95.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The TQMa7x is a SoM family with a pluggable board connector based on the
i.MX7 SoCs. Add support for the SoM and its combination with our
MBa7x carrier board.
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Alexander Feilke <alexander.feilke@ew.tq-group.com>
Remove the reference to the non-existent symbol. As ROMs typically
come as powers of two there seems no need for this value.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Fixes: 64542f4616 ("x86: Make ROM_SIZE configurable in Kconfig")
Reviewed-by: Tom Rini <trini@konsulko.com>
Once the stack is ready we can init the debug uart to help
with debugging so do that.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Angelo Dureghello <angelo@kernel-space.org>
Add configuration for ARMv8-M aarch32 core, which are currently
Cortex-M23/M33 cores. These cores are treated similar to ARMv7-M
cores, except the code has to be compiled with matching compiler
-march=armv8-m.main flag . These cores have no MMU, they have MPU,
which is currently not configured.
Unlike ARMv7-M, these cores have 512 interrupt vectors. While the
SYS_ARM_ARCH should be set to 8, it is set to 7 because all of the
initialization code is built from arch/arm/cpu/armv7m and not armv8.
Furthermore, CONFIG_ARM64 must be disabled, although DTs for devices
using these cores do come from arch/arm64/boot/dts.
To avoid excess duplication in Makefiles, introduce one new Kconfig
symbol, CPU_V7M_V8M. The CPU_V7M_V8M cover both ARMv7-M and ARMv8-M
cores.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Udit Kumar <u-kumar1@ti.com>
Conditionally compile code that is only compatible with 64bit ARMv8
on 64bit R-Car Gen3/4/5 SoCs. Protect such code with CONFIG_ARM64.
This split is implemented in preparation for build of Cortex-M33
version of R-Car Gen5 U-Boot for its RSIPM core.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Replace s_init() early initialization at the end of lowlevel_init
by invoking the same code in mach_cpu_init(). The mach_cpu_init()
is called a bit later, but as the code initializes timer and no
code uses timer until mach_cpu_init(), this does not pose a problem.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
The symbol SPL_SYS_MALLOC_F defaults to y when visible and
TPL_SYS_MALLOC_F defaults to y when visible and SPL_SYS_MALLOC_F is
enabled. Remove the places from Kconfig files that had unneccsary
"default y" for these options.
Signed-off-by: Tom Rini <trini@konsulko.com>
AM62d currently shares resource management configuration files with
AM62a. However, AM62a resource management needs to be modified for DMA
resource sharing scheme for CPSW3G Ethernet functionality to support
multi-core traffic handling.
Add separate AM62d-specific resource management configuration files to
decouple from the AM62a changes and maintain proper resource allocation
for AM62d.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
This is the first wave of MediaTek changes for this merge window. We
also expect to be sending another decent-sized pull request later for
the backlog of patches that are currently waiting on dependencies or
need little more time for review.
* Fixes for cargo-culted issues in mach-mediatek init.c files.
* Some consistency cleanups of recently added Genio boards (510/700/1200).
* Some pinctrl improvements to support newer MediaTek SOCs (mt8189 compatible).
* New devicetree and config for Genio 520/720 EVK boards (can boot to eMMC or SD).
* New CPU-specific functions to read vendor-specific CPU info at runtime.
The current mechanism uses a completely separate build rule for each
file which must be built with system headers. This is tricky to
maintain.
Add a foreach template in the sandbox cpu Makefile which generates the
custom compile rules from a CFLAGS_USE_SYSHDRS list. This keeps the
rules data-driven without needing changes to the common
scripts/Makefile.lib, which could affect other architectures.
Move initjmp.o into the template since it uses the same pattern. Add
sdl.o to the list too, with an override for its command since it also
needs -fshort-wchar removed and -fno-lto added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Define CONFIG_SYS_SOC in the mach-sc5xx Kconfig. Follow the standard
U-Boot include path convention by moving the SC5xx SoC headers from
arch/arm/include/asm/arch-adi/sc5xx/ to the conventional
arch/arm/include/asm/arch-sc5xx/ location. Update includes from
<asm/arch-adi/sc5xx/*.h> to <asm/arch/*.h> across mach-sc5xx and board
files.
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
The U_BOOT_DRIVER macro creates a list of drivers used at link time, and
all entries here must be unique. This in turn means that all entries in
the code should also be unique in order to not lead to build failures
later with unexpected build combinations. Typically, the problem we have
here is when a driver is obviously based on another driver and didn't
update this particular field and so while the name field reflects
something unique the linker entry itself is not. In a few places this
provides a more suitable string name as well, however.
Reviewed-by: Marek Vasut <marek.vasut+usb@mailbox.org>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # Tegra
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This symbol should not be enabled by the user directly but rather
selected when implemented in a given platform. This converts all of the
current users of this feature and hides the symbol.
Signed-off-by: Tom Rini <trini@konsulko.com>
Add U-Boot-specific device tree overrides for the Genio 520 and 720 EVK
boards. These are needed to enable SD card support in U-Boot due to
current driver limitations. It is expected that these files will remain
after eventually converting these to CONFIG_OF_UPSTREAM, so we use
separate .u-boot.dtsi files for this.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260316-mtk-ext-mmc-boot-v1-2-1aae51a44705@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8518.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-17-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the implementation of the gd->ram_top limit for mt8195.
The intention of the comment about MMC/DMA is correct, but the
implementation was wrong. gd->mon_len is set to the code size of U-Boot,
so trying to set it to limit gd->ram_top does not make sense.
Instead, there is already a get_effective_memsize() weak function that
we can override to implement the required limit on the usable memory
size. This is used to set gd->ram_top in setup_dest_addr().
The comment about the extra SZ_1M needing to be reserved is not correct
as U-Boot already takes care of this (with the actual size of U-Boot) in
the various board_f functions, so it is removed.
This fixes DMA not working on MMC on mt8195.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-12-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8195.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-11-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Fix the implementation of the gd->ram_top limit for mt8188.
The intention of the comment about MMC/DMA is correct, but the
implementation was wrong. gd->mon_len is set to the code size of U-Boot,
so trying to set it to limit gd->ram_top does not make sense.
Instead, there is already a get_effective_memsize() weak function that
we can override to implement the required limit on the usable memory
size. This is used to set gd->ram_top in setup_dest_addr().
The comment about the extra SZ_1M needing to be reserved is not correct
as U-Boot already takes care of this (with the actual size of U-Boot) in
the various board_f functions, so it is removed.
This fixes DMA not working on MMC on mt8188.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-8-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8188.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-7-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
Remove an incorrect call to fdtdec_setup_memory_banksize() in
dram_init() for mt8183.
fdtdec_setup_memory_banksize() populates gd->bd->bi_dram[bank].start
and gd->bd->bi_dram[bank].size base on the "memory" node in the device
tree. However, calling it from dram_init() is too early because gd->bd
has not been allocated yet.
gd->bd->bi_dram[0].start and gd->bd->bi_dram[0].size are already
correctly initialized later in dram_init_banksize(), so we do not need
to replace the removed function call with anything else.
Reviewed-by: Julien Stephan <jstephan@baylibre.com>
Tested-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20260319-mtk-init-fix-dram-v1-4-6171ec141f40@baylibre.com
Signed-off-by: David Lechner <dlechner@baylibre.com>
