Fix the link to the 2026.04 stats page. It was likely copied from the
2026.01 line below and not updated.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Add a contributors file to provide a high level overview
for people who wish to contribute to the project outlining
basic details and setting some project expectations.
This isn't intended to replace any of the existing documentation
but rather provide a succinct top level document that's easy
to find to enable users to understand the project and get
started as quickly as possible.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
[trini: Correct merge window length, release day and typo in the main
index]
Signed-off-by: Tom Rini <trini@konsulko.com>
As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing
PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it
to the existing board-code "phycore_imx93", and rename that board to
"phycore_imx91_93" to reflect the dual SoCs support. While at it, also
rename and change common files accordingly. This way i.MX91 and i.MX93
SoC variants of the phyCORE SoM share most of the code and documentation
without duplication, while maintaining own device-tree and defconfigs
for each CPU variant.
Supported features:
- 1GB LPDDR4 RAM
- Debug UART
- EEPROM
- eMMC
- Ethernet
- SD-card
- USB
Product page SoM:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
The requirement that .dtbos have load addresses in the FIT image
vanished five years ago with
4c531d9f58 ("fit: Load DTO into temporary buffer and ignore load address")
Fix the documentation accordingly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
CFG_WITH_SOFTWARE_PRNG=y was added as an OPTEE argument to workaround
some bugs related to TRNG which have been fixed now[1]. Therefore this
patch drops the redundant argument from the documentation.
[1]: e313f4765f
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Rather than having our "docs" build tagets modify PTYHONPATH, have
doc/conf.py append the required paths at runtime instead. This will
ensure that our builds from readthedocs will also find all of the
required files.
Signed-off-by: Tom Rini <trini@konsulko.com>
Commit 488445cefa ("doc: Move FIT into its own directory") moved the
documentation in doc/uImage.FIT to doc/usage/fit, subsequently all
documents and example sources have been converted to reStructuredText.
Fix (almost) all of the remaining occurrences of the old path and
filenames across the tree.
The exception is doc/uImage.FIT/command_syntax_extensions.txt which
apparently has been removed entirely, or at least I was unable to
locate where that document is now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add a new fwumdata tool to allows users to read, display, and modify FWU
(Firmware Update) metadata from Linux userspace. It provides functionality
similar to fw_printenv/fw_setenv but for FWU metadata. Users can view
metadata, change active/previous bank indices, modify bank states, and set
image acceptance flags. Configuration is done via fwumdata.config file.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Quentin Schulz <quentin.schulz@cherry.de> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/20251120-legacy-led-removal-v1-0-369d44338358@cherry.de
Only short option has been present. Also rename dump_sig
to dump-sig to match with other parameter names.
Fixes: 16abff246b ("tools: mkeficapsule: add firmware image signing")
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@mt.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Update the guidance for adding new tests to describe the subdirectory
structure instead of the numbering scheme.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move the remaining 60 or so test files into an entry/ subdirectory.
These cover general entry types and features: entry args, fill, text,
env, compress, replace, template, collection, ELF, overlap, listing,
sections, symlink, TEE OS, and other miscellaneous entries. Drop the
numeric prefixes and update all references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move about 20 test files for vendor-specific platform support (TI, NXP
i.MX, Renesas R-Car, Rockchip, PowerPC MPC85xx) into a vendor/
subdirectory. Drop the numeric prefixes and update all references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Move about 10 test files for ChromeOS entries (GBB, vblock, FMAP)
into a cros/ subdirectory. Drop the numeric prefixes and update all
references.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Move about 50 test files related to basic layout, packing, alignment,
sections, and image structure into a pack/ subdirectory. Drop the
numeric prefixes from the filenames and update all references in
ftest.py, entry_test.py, and binman_tests.rst
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot produces flash.bin as the final boot image when building for
the i.MX95 EVK, but the documentation refers to imx-boot-imx95.bin.
Update the instructions to use flash.bin when copying the image to
the SD card.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
The imx-oei and imx-sm build systems defaults to:
TC_VERSION ?= 14.2.rel1
but the documentation still instructs users to download the 13.3 toolchain.
This causes the build to fail because the expected directory name does
not exist.
Update the documentation to reference the 14.2 toolchain to match the build
system default.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Describe build with OpenSBI fw_dynamic.bin path as OPENSBI=<path> on the
same line instead of as an export. Also remedy a typo which had the wrong
directory path before the filename.
Fixes: 8304f32267 ("doc: board: starfive: update jh7110 common description")
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Describe build with output directory as O=<dir> environment variable
and not unrelated -O <output sync> command line argument.
Fixes: 8304f32267 ("doc: board: starfive: update jh7110 common description")
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
OrangePi RV is a board that uses the same EEPROM product serial identifier
as the StarFive VisionFive 2 1.3b.
In fact it is not completely compatible with the StarFive VisionFive 2
1.3b for use with Linux Kernel however it is good enough for use with
U-Boot SPL and U-Boot Main. Describe how to set the devicetree search path
and, for advanced users, suggest that it is possible to update the EEPROM
data with an invented "XOPIRV" identifier for automatic board detection.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Neha Malcom Francis <n-francis@ti.com> says:
Typically we do not enable these configs by default but would still like to
have the option to start building them in our default build flow for
testing. Also there is the added advantage of users being able to see what
is needed in case they choose to enable these features.
Link: https://lore.kernel.org/r/20260226122508.2269682-1-n-francis@ti.com
Add sections dedicated to explaining how BIST and inline ECC can be
enabled via the config fragments.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
The NanoPi Zero2 is a small single board computer developed by
FriendlyElec, based on the Rockchip RK3528A SoC.
Add support for the FriendlyElec NanoPi Zero2 board.
Features tested on a FriendlyElec NanoPi Zero2 2407:
- SD-card boot
- eMMC boot
- Ethernet
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add Kconfig option OF_SYSTEM_SETUP=y to support booting ROCK 5C Lite
boards with a RK3582 SoC. CPU and GPU cores are failed based on ip-state
and policy.
Tested on a ROCK 5C Lite v1.1:
cpu-code: 35 82
ip-state: 00 80 00 (otp)
ip-state: c0 9e 04 (policy)
remove cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@600
fail cpu cpu@700
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The hashed-nodes property in a FIT signature node lists which FDT paths
are included in the signature hash. It is intended as a hint so should
not be used for verification.
Add a function to build the node list from scratch by iterating the
configuration's image references. Skip properties known not to be image
references. For each image, collect the path plus all hash and cipher
subnodes.
Use the new function in fit_config_check_sig() instead of reading
'hashed-nodes'.
Update the test_vboot kernel@ test case: fit_check_sign now catches the
attack at signature-verification time (the @-suffixed node is hashed
instead of the real one, causing a mismatch) rather than at
fit_check_format() time.
Update the docs to cover this. The FIT spec can be updated separately.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Closes: https://lore.kernel.org/u-boot/20260302220937.3682128-1-trini@konsulko.com/
Reported-by: Apple Security Engineering and Architecture (SEAR)
Tested-by: Tom Rini <trini@konsulko.com>
Add Kconfig option OF_SYSTEM_SETUP=y to support booting boards with a
RK3582 SoC. CPU and GPU cores are failed based on ip-state and policy.
Tested on a ROCK 5C Lite v1.1:
cpu-code: 35 82
ip-state: 10 00 00 (otp)
ip-state: 30 9e 04 (policy)
remove cpu-map cluster1
rename cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@400
fail cpu cpu@500
and on a Radxa E52C:
cpu-code: 35 82
ip-state: 00 04 00 (otp)
ip-state: c0 9e 04 (policy)
remove cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@600
fail cpu cpu@700
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Flashing U-Boot for Exynos 7870 requires creating a stub device tree,
where certain properties and nodes are defined which are populated by
the previous bootloader in the phones.
Since these properties are now available in the U-Boot device tree, it's
now possible to use the same blob generated by U-Boot in place of the
stub, when creating boot images. Update the build documentation to
reflect the same.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
U-Boot for this board is programmed to use the external DTB if an
internal device tree is not available. This makes it safe to build boot
images using the non-DTB U-Boot binary, while taking up less space.
Reflect this change in documentation.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Since there is only one internal device tree allowed in U-Boot, the
DEVICE_TREE flag is required for building images for various devices.
Document it in the build guide.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
