Add support for creating an Amlogic Boot Image that pass CHK in BL1 on
Amlogic AArch64 SoCs.
Images can optionally be signed for secure boot scenario, however
creation of signed images has not been implemented.
Example of how to use it:
# Create an amlogic boot image
tools/mkimage -T amlimage -n gxbb -d u-boot-spl.bin u-boot-amlogic.bin
# List boot image header information
tools/mkimage -l u-boot-amlogic.bin
# Extract amlogic boot image payload
tools/dumpimage -T amlimage -o bl2-payload.bin u-boot-amlogic.bin
Or with binman using something like:
binman {
u-boot-amlogic {
filename = "u-boot-amlogic.bin";
pad-byte = <0xff>;
mkimage {
filename = "bl2.bin";
args = "-n", "gxbb", "-T", "amlimage";
u-boot-spl {
};
};
};
};
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
[Ferass: check digest type in _print_header, version in _verify_image]
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Link: https://patch.msgid.link/20251126-spl-gx-v5-1-6cbffb2451ca@postmarketos.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
When using binman with the '-a spl-dtb=y' flag, if the SPL blob is not
found, binman throws a cryptic error message:
binman: 'NoneType' object has no attribute 'startswith'
Let's improve the error message to explicitly state which SPL blob is
missing.
This is particularly useful when binman is used as a standalone tool
outside the U-Boot source tree.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
[trini: Add '# pragma: no cover' because coverage doesn't seem to like
the documentation about this error]
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove bootph properties no longer needed. These are now handled
in upstream Linux device trees.
While at it, drop the vtt-supply which is a leftover from the
very initial prototype of this board.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Remove symbols already present in the included file.
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Building this code on 64bit platforms leads to warnings (and so errors
in CI). Rather than rework the code, as this is a deprecated filesystem,
don't try and disallow building on 64bit hosts.
Signed-off-by: Tom Rini <trini@konsulko.com>
My old mail address, ziyao@disroot.org, has stopped working. Switch to
my new address, me@ziyao.cc, and map it in .mailmap.
Signed-off-by: Yao Zi <me@ziyao.cc>
With LTO enabled, mini U-Boot was hanging during reloc_fdt().
The initial stack pointer was placed too low, and the FDT memcpy
destination was carved only 4KB above it. This left insufficient
margin, causing the FDT copy to overwrite the live early stack
and corrupt execution before relocation.
To fix this, increase the malloc heap from 8KB to 12KB and raise the
initial stack pointer by 4KB. Together these adjustments increase
the separation between the early stack and the FDT region during
the pre-relocation phase, eliminating the overlap and fixing the
hang on mini builds (QSPI/OSPI).
Signed-off-by: Pranav Tilak <pranav.vinaytilak@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
The GitHub dependabot tool has reported two "high" priority bugs,
CVE-2025-66418 and CVE-2025-66471, with this package. Update to the
patched version.
Reported-by: GitHub dependabot
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Enable WGET_HTTPS (no CA verification; also enables dependency MBEDTLS_LIB)
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The following functions are provided:
Count leading zero bits
* int __clzsi2 (unsigned int a)
* int __clzdi2 (unsigned long a)
* int __clzti2 (unsigned long long a)
Count trailing zero bits
* int __ctzsi2 (unsigned int a)
* int __ctzdi2 (unsigned long a)
* int __ctzti2 (unsigned long long a)
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove setting of fdt_high to ~0, which disables device tree relocation,
from the default environment. Doing so prevents U-Boot from correcting
problems such as having an unaligned device tree and leads to various
failure modes in the OS.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
There are multiple boards that use the PolarFire SoC, so extract
the Kconfig sections that are determined at a CPU level from the board
Kconfigs now that we have a CPU Kconfig.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
PolarFire SoC needs a custom implementation of top_of_ram(), so stop
using the generic CPU & create a custom CPU instead.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Fix typo for "unsupport" size and improve description to Unknown DDR size.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Replace numeric literal with SZ_8G consistent with other uses of types
from linux/types.h
Signed-off-by: E Shattow <e@freeshell.de>
Acked-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
16GB memory size is not addressable on StarFive JH-7110 SoC because the
DRAM uncached alias begins at +8GB offset from start of DRAM. The logic
for 16GB memory size is a fall-through to the default for an unknown size.
Let's drop this unnecessary 16GB memory size and rely on the case default.
Signed-off-by: E Shattow <e@freeshell.de>
To support booting Linux from MMC, the file name should be
set up correctly. To support booting Linux from Parallel Flash,
the SPL_LOAD_FIT_ADDRESS should point to the Parallel Flash.
Signed-off-by: Randolph <randolph@andestech.com>
Add '\n' to the end of the warning message.
Besides, if we enable console record utility,
missing the '\n' causes the console_record_readline
fail to recognize the end of string.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Similar to the changes made for the world build job, rework the binman
testsuite job as well. There's no functional changes, but makes our CI
clearer to others familiar with Azure pipelines.
Signed-off-by: Tom Rini <trini@konsulko.com>
While we had problems historically using buildman inside of a container
when invoked directly via Azure, rather than calling docker in our
script, that is no longer the case. We can make the job a bit easier to
understand by running it more normally. The challenge here is that our
container normally runs with an unprivileged user that we have populated
tools for and Azure creates and uses a new unprivileged user. Copy what
we need over to the new user.
Signed-off-by: Tom Rini <trini@konsulko.com>
phyFLEX are SoMs based on the FPSC standard.
Add additional "SOM types" for the phyFLEX modules base on the
FPSC Gamma specification. These modules come in four different
variants; prototypes (PT), standard product (SP), KSP (KP) and
KSM (KM).
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Tested-by: Dominik Haller <d.haller@phytec.de>
Assign the return value of snprintf (total length) to a variable to
properly check if the string has the correct length.
Currently, this variable is always zero and the length check after
snprintf will always fail.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/28658
- Fix the i.MX9 USB instance number for revision B0.
- Add nxp-imx9image etype for binman node.
- Use default for SYS_MALLOC_F_LEN for apalis-imx8 and colibri-imx8x.
- Switch phycore-imx93 to standard boot.
- Update the nitrogen6x maintainer.
Set boot_targets environment variable dynamically, so that when booting
from SD-card, boot binaries are also preferably fetched from the SD-card
by default. If the user decides to set their own boot_targets, we should
not overwrite them.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Enable standard boot for the phyCORE-i.MX93 board and use it as a new
default. Add required standard boot variables to the environment, while
removing old boot scripts and now unnecessary environment variables.
Adjust variables according to the requirements of PHYTEC ampliphy-boot
distro-boot. Last but not least, order environment vars by alphabet and
run 'make savedefconfig' to resync defconfig.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Drop setting an explicit value for SYS_MALLOC_F_LEN. This increases
the available space to 0x10000.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Drop setting an explicit value for SYS_MALLOC_F_LEN. This increases
the available space to 0x10000.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
For silicon revision A1, the USB instance number for USB1 is 3 and for
USB2 it is 4. This changed for revision B0 where the USB instance number
for USB1 is 0 and for USB2 it is 1, which is the intended instance
number. Select the correct numbering according to the selected SoC
(IMX95) and its revision.
This patch is based on the information provided by:
"AN14750 Migration Guide from i.MX 95 A1 to B0; Rev. 1.0" .
Reviewed-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
Similar to the imx95, use the nxp-imx9image etype for the binman node to
facilitate further modifications.
Signed-off-by: Jérémie Dautheribes (Schneider Electric) <jeremie.dautheribes@bootlin.com>
