Prepare v2009.11.1

Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>
ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration
2026-06-03 18:26:41 +03:00 · 2010-01-25 09:35:12 +01:00 · 2010-01-23 17:54:03 +01:00 · 2010-01-23 17:53:55 +01:00 · 2010-01-23 17:53:22 +01:00 · 2010-01-23 17:53:11 +01:00
6436 changed files with 484011 additions and 414732 deletions
--- a/.gitignore
+++ b/.gitignore
@@ -13,7 +13,6 @@
 *~
 *.swp
 *.patch
-*.bin

 #
 # Top-level generic files
@@ -22,17 +21,15 @@
 /System.map
 /u-boot
 /u-boot.hex
-/u-boot.imx
 /u-boot.map
+/u-boot.bin
 /u-boot.srec
 /u-boot.ldr
 /u-boot.ldr.hex
 /u-boot.ldr.srec
-/u-boot.img
-/u-boot.kwb
-/u-boot.sha1
-/u-boot.dis
 /u-boot.lds
+/u-boot-onenand.bin
+/u-boot-flexonenand.bin

 #
 # Generated files
@@ -43,9 +40,6 @@
 /errlog
 /reloc_off

-/include/generated/
-/lib/asm-offsets.s
-
 # stgit generated dirs
 patches-*
 .stgit-edit.txt
--- a/77583
+++ b/77583
--- a/CHANGELOG-before-U-Boot-1.1.5
+++ b/CHANGELOG-before-U-Boot-1.1.5
--- a/10
+++ b/10
@@ -1,12 +1,4 @@
-  U-Boot is Free Software.  It is copyrighted by Wolfgang Denk and
-many others who contributed code (see the actual source code for
-details).  You can redistribute U-Boot and/or modify it under the
-terms of version 2 of the GNU General Public License as published by
-the Free Software Foundation.  Most of it can also be distributed,
-at your option, under any later version of the GNU General Public
-License -- see individual files for exceptions.
-
-  NOTE! This license does *not* cover the so-called "standalone"
+  NOTE! This copyright does *not* cover the so-called "standalone"
 applications that use U-Boot services by means of the jump table
 provided by U-Boot exactly for this purpose - this is merely
 considered normal use of U-Boot, and does *not* fall under the
--- a/22
+++ b/22
@@ -22,6 +22,10 @@ N: Guillaume Alexandre
 E: guillaume.alexandre@gespac.ch
 D: Add PCIPPC6 configuration

+N: Swen Anderson
+E: sand@peppercon.de
+D: ERIC Support
+
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA & NETPHONE board support, ARTOS support.
@@ -196,6 +200,10 @@ N: Andreas Heppel
 E: aheppel@sysgo.de
 D: CPU Support for MPC 75x; board support for Eltec BAB750 [obsolete!]

+N: August Hoeraendl
+E: august.hoerandl@gmx.at
+D: Support for the logodl board (PXA2xx)
+
 N: Josh Huber
 E: huber@alum.wpi.edu
 D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series.
@@ -278,6 +286,11 @@ N: Thomas Lange
 E: thomas@corelatus.se
 D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes

+N: Marc Leeman
+E: marc.leeman@barco.com
+D: Support for Barco Streaming Video Card (SVC) and Sample Compress Network (SCN)
+W: www.barco.com
+
 N: The LEOX team
 E: team@leox.org
 D: Support for LEOX boards, DS164x RTC
@@ -424,11 +437,11 @@ D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots mor

 N: Andre Schwarz
 E: andre.schwarz@matrix-vision.de
-D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR)
+D: Support for Matrix Vision boards (MVBLM7/MVBC_P)

 N: Robert Schwebel
 E: r.schwebel@pengutronix.de
-D: Support for csb226 and innokom boards (PXA2xx)
+D: Support for csb226, logodl and innokom boards (PXA2xx)

 N: Aaron Sells
 E: sellsa@embeddedplanet.com
@@ -498,11 +511,6 @@ N: Martin Winistoerfer
 E: martinwinistoerfer@gmx.ch
 D: Port to MPC555/556 microcontrollers and support for cmi board

-N: David Wu
-E: support@arcturusnetworks.com
-D: Mercury Security EP2500
-W: http://www.arcturusnetworks.com
-
 N: Ming-Len Wu
 E: minglen_wu@techware.com.tw
 D: Motorola MX1ADS board support
--- a/409
+++ b/409
@@ -36,7 +36,6 @@ Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 	mecp5200	MPC5200
 	pf5200		MPC5200

-	caddy2		MPC8349
 	vme8349		MPC8349

 	CPCI750		PPC750FX/GX
@@ -62,10 +61,6 @@ Oliver Brown <obrown@adventnetworks.com>

 	gw8260		MPC8260

-Cyril Chemparathy <cyril@ti.com>
-
-	tnetv107x_evm	tnetv107x
-
 Conn Clark <clark@esteem.com>

 	ESTEEM192E	MPC8xx
@@ -84,6 +79,7 @@ Torsten Demke <torsten.demke@fci.com>

 Wolfgang Denk <wd@denx.de>

+	IceCube_5100	MGT5100
 	IceCube_5200	MPC5200

 	ARIA		MPC5121e
@@ -102,6 +98,7 @@ Wolfgang Denk <wd@denx.de>
 	IVMS8_256	MPC860
 	LANTEC		MPC850
 	LWMON		MPC823
+	NC650		MPC852
 	R360MPI		MPC823
 	RMU		MPC850
 	RRvision	MPC823
@@ -116,9 +113,11 @@ Wolfgang Denk <wd@denx.de>
 	c2mon		MPC855
 	hermes		MPC860
 	lwmon		MPC823
+	pcu_e		MPC855

 	CU824		MPC8240
 	Sandpoint8240	MPC8240
+	SL8245		MPC8245

 	ATC		MPC8250
 	PM825		MPC8250
@@ -134,23 +133,18 @@ Wolfgang Denk <wd@denx.de>
 	PCIPPC2		MPC750
 	PCIPPC6		MPC750

+	EXBITGEN	PPC405GP
+
 Jon Diekema <jon.diekema@smiths-aerospace.com>

 	sbc8260		MPC8260

-Alex Dubov <oakad@yahoo.com>
-
-	mpq101		MPC8548
-
 Dirk Eibach <eibach@gdsys.de>

 	devconcenter	PPC460EX
 	dlvision        PPC405EP
-	dlvision-10g	PPC405EP
 	gdppc440etx	PPC440EP/GR
 	intip		PPC460EX
-	io		PPC405EP
-	iocon		PPC405EP
 	neo		PPC405EP

 Dave Ellis <DGE@sixnetio.com>
@@ -199,18 +193,6 @@ Niklaus Giger <niklaus.giger@netstal.com>
 	MCU25		PPC405GPr
 	HCU5		PPC440EPx

-Siddarth Gore <gores@marvell.com>
-
-	guruplug	ARM926EJS (Kirkwood SoC)
-
-Paul Gortmaker <paul.gortmaker@windriver.com>
-
-	sbc8349		MPC8349
-	sbc8540		MPC8540
-	sbc8548		MPC8548
-	sbc8560		MPC8560
-	sbc8641d	MPC8641D
-
 Frank Gottschling <fgottschling@eltec.de>

 	MHPC		MPC8xx
@@ -219,12 +201,17 @@ Frank Gottschling <fgottschling@eltec.de>

 Wolfgang Grandegger <wg@denx.de>

-	ipek01		MPC5200
+	CCM		MPC855

 	PN62		MPC8240
 	IPHASE4539	MPC8260
 	SCM		MPC8260

+Joe Hamman <joe.hamman@embeddedspecialties.com>
+
+	sbc8548		MPC8548
+	sbc8641d	MPC8641D
+
 Klaus Heydeck <heydeck@kieback-peter.de>

 	KUP4K		MPC855
@@ -234,7 +221,6 @@ Ilko Iliev <iliev@ronetix.at>

 	PM9261		AT91SAM9261
 	PM9263		AT91SAM9263
-	PM9G45		ARM926EJS (AT91SAM9G45 SoC)

 Gary Jennejohn <garyj@denx.de>

@@ -264,6 +250,14 @@ Sangmoon Kim <dogoil@etinsys.com>
 	debris		MPC8245
 	KVME080		MPC8245

+Thomas Lange <thomas@corelatus.se>
+
+	GTH		MPC860
+
+Robert Lazarski <robertlazarski@gmail.com>
+
+	ATUM8548	MPC8548
+
 The LEOX team <team@leox.org>

 	ELPT860		MPC860T
@@ -302,11 +296,6 @@ Dan Malek <dan@embeddedalley.com>
 	stxssa		MPC85xx
 	stxxtc		MPC8xx

-Ryan Mallon <ryan@bluewatersys.com>
-
-	snapper9260		ARM926EJS (AT91SAM9260 SoC)
-	snapper9g20		ARM926EJS (AT91SAM9G20 SoC)
-
 Eran Man <eran@nbase.co.il>

 	EVB64260_750CX	MPC750CX
@@ -315,15 +304,10 @@ Andrea "llandre" Marson <andrea.marson@dave-tech.it>

 	PPChameleonEVB	PPC405EP

-Tirumala Marri <tmarri@apm.com>
-
-	bluestone       APM821XX
-
-Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
+Reinhard Meyer <r.meyer@emk-elektronik.de>

 	TOP860		MPC860T
 	TOP5200		MPC5200
-	TOP9000		ARM926EJS (AT91SAM9xxx SoC)

 Tolunay Orkun <torkun@nextio.com>

@@ -349,10 +333,6 @@ Denis Peter <d.peter@mpl.ch>
 	MIP405		PPC4xx
 	PIP405		PPC4xx

-Werner Pfister <Pfister_Werner@intercontrol.de>
-	digsy_mtc	mpc5200
-	digsy_mtc_rev5	mpc5200
-
 Kim Phillips <kim.phillips@freescale.com>

 	MPC8349EMDS	MPC8349
@@ -362,14 +342,6 @@ Daniel Poirot <dan.poirot@windriver.com>
 	sbc8240		MPC8240
 	sbc405		PPC405GP

-Sergei Poselenov <sposelenov@emcraft.com>
-
-	a4m072		MPC5200
-
-Sudhakar Rajashekhara <sudhakar.raj@ti.com>
-
-	da850evm	ARM926EJS (DA850/OMAP-L138)
-
 Ricardo Ribalda <ricardo.ribalda@uam.es>

 	ml507 		PPC440x5
@@ -393,7 +365,6 @@ Stefan Roese <sr@denx.de>
 	ebony		PPC440GP
 	glacier		PPC460GT
 	haleakala	PPC405EXr
-	icon		PPC440SPe
 	katmai		PPC440SPe
 	kilauea		PPC405EX
 	lwmon5		PPC440EPx
@@ -404,7 +375,6 @@ Stefan Roese <sr@denx.de>
 	rainier		PPC440GRx
 	sequoia		PPC440EPx
 	sycamore	PPC405GPr
-	t3corp		PPC460GT
 	taishan		PPC440GX
 	walnut		PPC405GP
 	yellowstone	PPC440GR
@@ -428,22 +398,18 @@ Georg Schardt <schardt@team-ctech.de>

 Heiko Schocher <hs@denx.de>

-	charon		MPC5200
 	ids8247		MPC8247
 	jupiter		MPC5200
 	kmeter1		MPC8360
-	kmsupx5		MPC8321
+	kmsupx4		MPC852T
 	mgcoge		MPC8247
-	mgcoge3ne	MPC8247
+	mgsuvd		MPC852
 	mucmc52		MPC5200
 	muas3001	MPC8270
 	municse		MPC5200
 	sc3		PPC405GP
-	suvd3		MPC8321
-	tuda1		MPC8321
-	tuxa1		MPC8321
 	uc101		MPC5200
-	ve8313		MPC8313
+

 Peter De Schrijver <p2@mind.be>

@@ -453,7 +419,6 @@ Andre Schwarz <andre.schwarz@matrix-vision.de>

 	mvbc_p		MPC5200
 	mvblm7		MPC8343
-	mvsmr		MPC5200

 Jon Smirl <jonsmirl@gmail.com>

@@ -463,7 +428,6 @@ Timur Tabi <timur@freescale.com>

 	MPC8349E-mITX	MPC8349
 	MPC8349E-mITX-GP MPC8349
-	P1022DS		P1022

 Erik Theisen <etheisen@mindspring.com>

@@ -481,11 +445,10 @@ Rune Torgersen <runet@innovsys.com>

 Peter Tyser <ptyser@xes-inc.com>

-	xpedite1000	PPC440GX
-	xpedite5170	MPC8640
-	xpedite5200	MPC8548
-	xpedite5370	MPC8572
-	xpedite5500	P2020
+	XPEDITE1000	PPC440GX
+	XPEDITE5170	MPC8640
+	XPEDITE5200	MPC8548
+	XPEDITE5370	MPC8572

 David Updegraff <dave@cray.com>

@@ -500,19 +463,10 @@ Josef Wagner <Wagner@Microsys.de>
 	CPC45		MPC8245
 	PM520		MPC5200

-Michael Weiss <michael.weiss@ifm.com>
-
-	PDM360NG	MPC5121e
-
 Stephen Williams <steve@icarus.com>

 	JSE		PPC405GPr

-Ilya Yanok <yanok@emcraft.com>
-
-	mpc8308_p1m	MPC8308
-	MPC8308RDB	MPC8308
-
 Roy Zang <tie-fei.zang@freescale.com>

 	mpc7448hpc2	MPC7448
@@ -541,6 +495,8 @@ Unknown / orphaned boards:
 	RPXClassic	MPC8xx
 	RPXlite		MPC8xx

+	ERIC		PPC4xx
+
 	MOUSSE		MPC824x

 	RPXsuper	MPC8260
@@ -556,36 +512,18 @@ Unknown / orphaned boards:
 #	Board		CPU						#
 #########################################################################

-Albert ARIBAUD <albert.u.boot@aribaud.net>
-
-	edminiv2	ARM926EJS (Orion5x SoC)
-
 Rowel Atienza <rowel@diwalabs.com>

 	armadillo	ARM720T

 Stefano Babic <sbabic@denx.de>

-	ea20		davinci
-	mx35pdk		i.MX35
-	mx51evk		i.MX51
-	polaris		xscale/pxa
-	trizepsiv	xscale/pxa
- 	vision2		i.MX51
-
-Jason Liu <r64343@freescale.com>
-
-	mx53evk         i.MX53
-	mx53loco        i.MX53
-
-Enric Balletbo i Serra <eballetbo@iseebcn.com>
-
-	igep0020	ARM ARMV7 (OMAP3xx SoC)
-	igep0030	ARM ARMV7 (OMAP3xx SoC)
+	polaris		xscale
+	trizepsiv	xscale

 Dirk Behme <dirk.behme@gmail.com>

-	omap3_beagle	ARM ARMV7 (OMAP3530 SoC)
+	omap3_beagle	ARM CORTEX-A8 (OMAP3530 SoC)

 Eric Benard <eric@eukrea.com>

@@ -597,30 +535,14 @@ Rishi Bhattacharya <rishi@ti.com>

 	omap5912osk	ARM926EJS

-Andreas Bießmann <andreas.devel@gmail.com>
-
-	at91rm9200ek	at91rm9200
-
 Cliff Brake <cliff.brake@gmail.com>

-	pxa255_idp	xscale/pxa
+	pxa255_idp	xscale

 Rick Bronson <rick@efn.org>

 	AT91RM9200DK	at91rm9200

-Luca Ceresoli <luca.ceresoli@comelit.it>
-
-	dig297		ARM ARMV7 (OMAP3530 SoC)
-
-Po-Yu Chuang <ratbert@faraday-tech.com>
-
-	a320evb		FA526 (ARM920T-like) (a320 SoC)
-
-Eric Cooper <ecc@cmu.edu>
-
-	dockstar	ARM926EJS (Kirkwood SoC)
-
 George G. Davis <gdavis@mvista.com>

 	assabet		SA1100
@@ -634,19 +556,17 @@ Thomas Elste <info@elste.org>

 	modnet50	ARM720T (NET+50)

-Kristoffer Ericson <kristoffer.ericson@gmail.com>
-
-	jornada	SA1110
-
-Fabio Estevam <fabio.estevam@freescale.com>
+Fabio Estevam <Fabio.Estevam@freescale.com>

 	mx31pdk		i.MX31
-	mx53smd		i.MX53
+
+Peter Figuli <peposh@etc.sk>
+
+	wepep250	xscale

 Daniel Gorsulowski <daniel.gorsulowski@esd.eu>

 	meesc		ARM926EJS (AT91SAM9263 SoC)
-	otc570		ARM926EJS (AT91SAM9263 SoC)

 Sedji Gaouaou<sedji.gaouaou@atmel.com>
 	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
@@ -657,57 +577,34 @@ Marius Gr
 	impa7		ARM720T (EP7211)
 	ep7312		ARM720T (EP7312)

-Igor Grinberg <grinberg@compulab.co.il>
-
-	cm-t35		ARM ARMV7 (OMAP3xx Soc)
-
 Kshitij Gupta <kshitij@ti.com>

 	omap1510inn	ARM925T
 	omap1610inn	ARM926EJS

-Vaibhav Hiremath <hvaibhav@ti.com>
-
-	am3517_evm	ARM ARMV7 (AM35x SoC)
-
 Grazvydas Ignotas <notasas@gmail.com>

-	omap3_pandora	ARM ARMV7 (OMAP3xx SoC)
+	omap3_pandora	ARM CORTEX-A8 (OMAP3xx SoC)

 Gary Jennejohn <garyj@denx.de>

 	smdk2400	ARM920T
-
-Matthias Kaehlcke <matthias@kaehlcke.net>
-	edb9301			ARM920T (EP9301)
-	edb9302			ARM920T (EP9302)
-	edb9302a		ARM920T (EP9302)
-	edb9307			ARM920T (EP9307)
-	edb9307a		ARM920T (EP9307)
-	edb9312			ARM920T (EP9312)
-	edb9315			ARM920T (EP9315)
-	edb9315a		ARM920T (EP9315)
+	trab		ARM920T

 Konstantin Kletschke <kletschke@synertronixx.de>
 	scb9328		ARM920T

+Simon Kagstrom <simon.kagstrom@netinsight.net>
+
+       openrd_base     ARM926EJS (Kirkwood SoC)
+
 Nishant Kamat <nskamat@ti.com>

 	omap1610h2	ARM926EJS

-Minkyu Kang <mk7.kang@samsung.com>
-
-	SMDKC100		ARM ARMV7 (S5PC100 SoC)
-	s5p_goni		ARM ARMV7 (S5PC110 SoC)
-	s5pc210_universal	ARM ARMV7 (S5PC210 SoC)
-
-Chander Kashyap <k.chander@samsung.com>
-
-	SMDKV310		ARM ARMV7 (S5PC210 SoC)
-
 Frederik Kriewitz <frederik@kriewitz.eu>

-	devkit8000	ARM ARMV7 (OMAP3530 SoC)
+	devkit8000	ARM CORTEX-A8 (OMAP3530 SoC)

 Sergey Kubushyn <ksi@koi8.net>

@@ -715,25 +612,31 @@ Sergey Kubushyn <ksi@koi8.net>
 	SONATA		ARM926EJS
 	SCHMOOGIE	ARM926EJS

+Sandeep Paulraj <s-paulraj@ti.com>
+
+	davinci_dm355evm	ARM926EJS
+	davinci_dm355leopard	ARM926EJS
+	davinci_dm365evm	ARM926EJS
+	davinci_dm6467evm	ARM926EJS
+
 Prakash Kumar <prakash@embedx.com>

-	cerf250		xscale/pxa
-
-Vipin Kumar <vipin.kumar@st.com>
-
-	spear300	ARM926EJS (spear300 Soc)
-	spear310	ARM926EJS (spear310 Soc)
-	spear320	ARM926EJS (spear320 Soc)
-	spear600	ARM926EJS (spear600 Soc)
+	cerf250		xscale

 Sergey Lapin <slapin@ossfans.org>

 	afeb9260	ARM926EJS (AT91SAM9260 SoC)

+Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+	imx31_phycore_eet	i.MX31
+	mx31ads			i.MX31
+	SMDK6400		S3C6400
+
 Nishanth Menon <nm@ti.com>

-	omap3_sdp3430	ARM ARMV7 (OMAP3xx SoC)
-	omap3_zoom1	ARM ARMV7 (OMAP3xx SoC)
+	omap3_sdp3430	ARM CORTEX-A8 (OMAP3xx SoC)
+	omap3_zoom1	ARM CORTEX-A8 (OMAP3xx SoC)

 David Müller <d.mueller@elsoft.ch>

@@ -744,10 +647,6 @@ Eric Millbrandt <emillbrandt@dekaresearch.com>

 	galaxy5200	mpc5200

-Nagendra T S  <nagendra@mistralsolutions.com>
-
-   am3517_crane    ARM ARMV7 (AM35x SoC)
-
 Rolf Offermanns <rof@sysgo.de>

 	shannon		SA1100
@@ -756,13 +655,6 @@ Kyungmin Park <kyungmin.park@samsung.com>

 	apollon		ARM1136EJS

-Sandeep Paulraj <s-paulraj@ti.com>
-
-	davinci_dm355evm	ARM926EJS
-	davinci_dm355leopard	ARM926EJS
-	davinci_dm365evm	ARM926EJS
-	davinci_dm6467evm	ARM926EJS
-
 Peter Pearse <peter.pearse@arm.com>
 	integratorcp	All current ARM supplied & supported core modules
 			-see http://www.arm.com/products/DevTools/Hardware_Platforms.html
@@ -775,7 +667,7 @@ Dave Peverley <dpeverley@mpc-data.co.uk>

 Manikandan Pillai <mani.pillai@ti.com>

-	omap3_evm	ARM ARMV7 (OMAP3xx SoC)
+	omap3_evm	ARM CORTEX-A8 (OMAP3xx SoC)

 Stelian Pop <stelian.pop@leadtechdesign.com>

@@ -787,61 +679,39 @@ Stelian Pop <stelian.pop@leadtechdesign.com>

 Tom Rix <Tom.Rix@windriver.com>

-	omap3_zoom2	ARM ARMV7 (OMAP3xx SoC)
-
-John Rigby <jcrigby@gmail.com>
-
-	tx25		i.MX25
+	omap3_zoom2	ARM CORTEX-A8 (OMAP3xx SoC)

 Stefan Roese <sr@denx.de>

-	ixdpg425	xscale/ixp
-	pdnb3		xscale/ixp
-	scpu		xscale/ixp
+	ixdpg425	xscale
+	pdnb3		xscale
+	scpu		xscale

 Alessandro Rubini <rubini@unipv.it>
 Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>

-	nhk8815		ARM926EJS (Nomadik 8815 Soc)
+	nmdk8815	ARM926EJS (Nomadik 8815 Soc)

 Steve Sakoman <sakoman@gmail.com>

-	omap3_overo	ARM ARMV7 (OMAP3xx SoC)
-	omap4_panda	ARM ARMV7 (OMAP4xx SoC)
-	omap4_sdp4430	ARM ARMV7 (OMAP4xx SoC)
-
-Jens Scharsig <esw@bus-elektronik.de>
-
-	eb_cpux9k2	ARM920T (AT91RM9200 SoC)
-
-Heiko Schocher <hs@denx.de>
-
-	magnesium	i.MX27
-	mgcoge3un	ARM926EJS (Kirkwood SoC)
-	suen3		ARM926EJS (Kirkwood SoC)
-	suen8		ARM926EJS (Kirkwood SoC)
+	omap3_overo	ARM CORTEX-A8 (OMAP3xx SoC)

 Robert Schwebel <r.schwebel@pengutronix.de>

-	csb226		xscale/pxa
-	innokom		xscale/pxa
+	csb226		xscale
+	innokom		xscale

 Michael Schwingen <michael@schwingen.org>

-	actux1		xscale/ixp
-	actux2		xscale/ixp
-	actux3		xscale/ixp
-	actux4		xscale/ixp
-	dvlhost		xscale/ixp
+	actux1		xscale
+	actux2		xscale
+	actux3		xscale
+	actux4		xscale

 Andrea Scian <andrea.scian@dave-tech.it>

 	B2		ARM7TDMI (S3C44B0X)

-Nick Thompson <nick.thompson@gefanuc.com>
-
-	da830evm	ARM926EJS (DA830/OMAP-L137)
-
 Albin Tonnerre <albin.tonnerre@free-electrons.com>

 	sbc35_a9g20	ARM926EJS (AT91SAM9G20 SoC)
@@ -854,45 +724,16 @@ Greg Ungerer <greg.ungerer@opengear.com>
 	cm4116		ks8695p
 	cm4148		ks8695p

-Marek Vasut <marek.vasut@gmail.com>
-
-	balloon3	xscale/pxa
-	colibri_pxa270	xscale/pxa
-	palmld		xscale/pxa
-	palmtc		xscale/pxa
-	vpac270		xscale/pxa
-	zipitz2		xscale/pxa
- 	efikamx		i.MX51
-
 Hugo Villeneuve <hugo.villeneuve@lyrtech.com>

 	SFFSDR		ARM926EJS

-Matt Waddel <matt.waddel@linaro.org>
-
-	ca9x4_ct_vxp	ARM ARMV7 (Quad Core)
-
 Prafulla Wadaskar <prafulla@marvell.com>

-	aspenite	ARM926EJS (ARMADA100 88AP168 SoC)
 	mv88f6281gtw_ge	ARM926EJS (Kirkwood SoC)
-	openrd_base     ARM926EJS (Kirkwood SoC)
 	rd6281a		ARM926EJS (Kirkwood SoC)
 	sheevaplug	ARM926EJS (Kirkwood SoC)

-Tom Warren <twarren@nvidia.com>
-
-	harmony		Tegra2 (ARM7 & A9 Dual Core)
-	seaboard	Tegra2 (ARM7 & A9 Dual Core)
-
-Lei Wen <leiwen@marvell.com>
-
-	dkb		ARM926EJS (PANTHEON 88AP920 SOC)
-
-Matthias Weisser <weisserm@arcor.de>
-
-	jadecpu		ARM926EJS (MB86R01 SoC)
-
 Richard Woodruff <r-woodruff2@ti.com>

 	omap2420h4	ARM1136EJS
@@ -902,23 +743,18 @@ Alex Z
 	lart		SA1100
 	dnp1110		SA1110

-Syed Mohammed Khasim <sm.khasim@gmail.com>
-Sughosh Ganu <urwithsughosh@gmail.com>
+Minkyu Kang <mk7.kang@samsung.com>

-	hawkboard	ARM926EJS (OMAP-L138)
+	SMDKC100	ARM CORTEX-A8 (S5PC100 SoC)

 -------------------------------------------------------------------------

 Unknown / orphaned boards:
 	Board		CPU	Last known maintainer / Comment
 .........................................................................
-	cradle		xscale/pxa	Kyle Harris <kharris@nexus-tech.net> / dead address
-	ixdp425		xscale/ixp	Kyle Harris <kharris@nexus-tech.net> / dead address
-	lubbock		xscale/pxa	Kyle Harris <kharris@nexus-tech.net> / dead address
-
-	imx31_phycore_eet i.MX31  Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
-	mx31ads		  i.MX31  Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
-	SMDK6400	  S3C6400 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
+	cradle		xscale	Kyle Harris <kharris@nexus-tech.net> / dead address
+	ixdp425		xscale	Kyle Harris <kharris@nexus-tech.net> / dead address
+	lubbock		xscale	Kyle Harris <kharris@nexus-tech.net> / dead address

 #########################################################################
 # x86 Systems:								#
@@ -927,9 +763,9 @@ Unknown / orphaned boards:
 #	Board		CPU						#
 #########################################################################

-Graeme Russ <graeme.russ@gmail.com>
+Daniel Engström <daniel@omicron.se>

-	eNET		AMD SC520
+	sc520_cdp	x86

 #########################################################################
 # MIPS Systems:								#
@@ -941,6 +777,7 @@ Graeme Russ <graeme.russ@gmail.com>
 Wolfgang Denk <wd@denx.de>

 	incaip		MIPS32 4Kc
+	purple		MIPS64 5Kc

 Thomas Lange <thomas@corelatus.se>
 	dbau1x00	MIPS32 Au1000
@@ -953,6 +790,22 @@ Stefan Roese <sr@denx.de>

 	vct_xxx		MIPS32 4Kc

+#########################################################################
+# Nios-32 Systems:							#
+#									#
+# Maintainer Name, Email Address					#
+#	Board		CPU						#
+#########################################################################
+
+Stephan Linz <linz@li-pro.net>
+
+	DK1S10		Nios-32
+	ADNPESC1	Nios-32
+
+Scott McNutt <smcnutt@psyent.com>
+
+	DK1C20		Nios-32
+
 #########################################################################
 # Nios-II Systems:							#
 #									#
@@ -964,7 +817,9 @@ Scott McNutt <smcnutt@psyent.com>

 	PCI5441		Nios-II
 	PK1C20		Nios-II
-	nios2-generic	Nios-II
+	EP1C20		Nios-II
+	EP1S10		Nios-II
+	EP1S40		Nios-II

 #########################################################################
 # MicroBlaze Systems:							#
@@ -1004,10 +859,6 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 	M5475EVB	mcf547x_8x
 	M5485EVB	mcf547x_8x

-Wolfgang Wegner <w.wegner@astro-kom.de>
-
-	astro_mcf5373l	MCF5373L
-
 #########################################################################
 # AVR32 Systems:							#
 #									#
@@ -1058,16 +909,14 @@ Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 	SH7763RDP	SH7763
 	RSK7203		SH7203
 	AP325RXA	SH7723
-	SHMIN		SH7706

 Mark Jonas <mark.jonas@de.bosch.com>

 	mpr2		SH7720

-Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>

 	MS7720SE	SH7720
-	R0P77570030RL	SH7757
 	R0P77850011RL	SH7785

 #########################################################################
@@ -1080,13 +929,9 @@ Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 Mike Frysinger <vapier@gentoo.org>
 Blackfin Team <u-boot-devel@blackfin.uclinux.org>

-	BF506F-EZKIT	BF506
 	BF518F-EZBRD	BF518
 	BF526-EZBRD	BF526
-	BF527-AD7160-EVAL	BF527
 	BF527-EZKIT	BF527
-	BF527-EZKIT-V2	BF527
-	BF527-SDP	BF527
 	BF533-EZKIT	BF533
 	BF533-STAMP	BF533
 	BF537-PNAV	BF537
@@ -1095,35 +940,8 @@ Blackfin Team <u-boot-devel@blackfin.uclinux.org>
 	BF548-EZKIT	BF548
 	BF561-EZKIT	BF561

-M.Hasewinkel (MHA) <info@ssv-embedded.de>
-
-	dnp5370		BF537
-
-Brent Kandetzki <brentk@teleco.com>
-
-	IP04		BF532
-
-Peter Meerwald <devel@bct-electronic.com>
-
-	bct-brettl2	BF536
-
-I-SYST Micromodule <support@i-syst.com>
-
-	IBF-DSP561	BF561
-
-Wojtek Skulski <skulski@pas.rochester.edu>
-Wojtek Skulski <info@skutek.com>
-Benjamin Matthews <mben12@gmail.com>
-
-	BlackStamp	BF533
-	BlackVME	BF561
-
-Martin Strubel <strubel@section5.ch>
-
-	BF537-minotaur	BF537
-	BF537-srv1	BF537
-
 Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org>
+Blackfin Team <u-boot-devel@blackfin.uclinux.org>

 	CM-BF527	BF527
 	CM-BF533	BF533
@@ -1131,18 +949,23 @@ Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org>
 	CM-BF537U	BF537
 	CM-BF548	BF548
 	CM-BF561	BF561
-	TCM-BF518	BF518
 	TCM-BF537	BF537

-Valentin Yakovenkov <yakovenkov@niistt.ru>
-Anton Shurpin <shurpin.aa@niistt.ru>
+Martin Strubel <strubel@section5.ch>
+Blackfin Team <u-boot-devel@blackfin.uclinux.org>

-	BF561-ACVILON	BF561
+	BF537-minotaur	BF537
+	BF537-srv1	BF537

-Haitao Zhang <hzhang@ucrobotics.com>
-Chong Huang <chuang@ucrobotics.com>
+Wojtek Skulski <skulski@pas.rochester.edu>
+Benjamin Matthews <mben12@gmail.com>

-	bf525-ucr2	BF525
+	BLACKSTAMP	BF532
+
+I-SYST Micromodule <support@i-syst.com>
+Blackfin Team <u-boot-devel@blackfin.uclinux.org>
+
+	IBF-DSP561	BF561

 #########################################################################
 # End of MAINTAINERS list						#
--- a/821
+++ b/821
--- a/3268
+++ b/3268
--- a/569
+++ b/569
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000 - 2011
+# (C) Copyright 2000 - 2009
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -126,104 +126,80 @@ the string "u_boot" or on "U_BOOT". Example:
 Versioning:
 ===========

-Starting with the release in October 2008, the names of the releases
-were changed from numerical release numbers without deeper meaning
-into a time stamp based numbering. Regular releases are identified by
-names consisting of the calendar year and month of the release date.
-Additional fields (if present) indicate release candidates or bug fix
-releases in "stable" maintenance trees.
+U-Boot uses a 3 level version number containing a version, a
+sub-version, and a patchlevel: "U-Boot-2.34.5" means version "2",
+sub-version "34", and patchlevel "4".

-Examples:
-	U-Boot v2009.11     - Release November 2009
-	U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
-	U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+The patchlevel is used to indicate certain stages of development
+between released versions, i. e. officially released versions of
+U-Boot will always have a patchlevel of "0".


 Directory Hierarchy:
 ====================

-/arch			Architecture specific files
-  /arm			Files generic to ARM architecture
-    /cpu		CPU specific files
-      /arm720t		Files specific to ARM 720 CPUs
-      /arm920t		Files specific to ARM 920 CPUs
-	/at91rm9200	Files specific to Atmel AT91RM9200 CPU
-	/imx		Files specific to Freescale MC9328 i.MX CPUs
-	/s3c24x0	Files specific to Samsung S3C24X0 CPUs
-      /arm925t		Files specific to ARM 925 CPUs
-      /arm926ejs	Files specific to ARM 926 CPUs
-      /arm1136		Files specific to ARM 1136 CPUs
-      /ixp		Files specific to Intel XScale IXP CPUs
-      /pxa		Files specific to Intel XScale PXA CPUs
-      /s3c44b0		Files specific to Samsung S3C44B0 CPUs
-      /sa1100		Files specific to Intel StrongARM SA1100 CPUs
-    /lib		Architecture specific library files
-  /avr32		Files generic to AVR32 architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
-  /blackfin		Files generic to Analog Devices Blackfin architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
-  /x86			Files generic to x86 architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
-  /m68k			Files generic to m68k architecture
-    /cpu		CPU specific files
-      /mcf52x2		Files specific to Freescale ColdFire MCF52x2 CPUs
-      /mcf5227x		Files specific to Freescale ColdFire MCF5227x CPUs
-      /mcf532x		Files specific to Freescale ColdFire MCF5329 CPUs
-      /mcf5445x		Files specific to Freescale ColdFire MCF5445x CPUs
-      /mcf547x_8x	Files specific to Freescale ColdFire MCF547x_8x CPUs
-    /lib		Architecture specific library files
-  /microblaze		Files generic to microblaze architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
-  /mips			Files generic to MIPS architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
-  /nios2		Files generic to Altera NIOS2 architecture
-    /cpu		CPU specific files
-    /lib		Architecture specific library files
-  /powerpc		Files generic to PowerPC architecture
-    /cpu		CPU specific files
-      /74xx_7xx		Files specific to Freescale MPC74xx and 7xx CPUs
-      /mpc5xx		Files specific to Freescale MPC5xx CPUs
-      /mpc5xxx		Files specific to Freescale MPC5xxx CPUs
-      /mpc8xx		Files specific to Freescale MPC8xx CPUs
-      /mpc8220		Files specific to Freescale MPC8220 CPUs
-      /mpc824x		Files specific to Freescale MPC824x CPUs
-      /mpc8260		Files specific to Freescale MPC8260 CPUs
-      /mpc85xx		Files specific to Freescale MPC85xx CPUs
-      /ppc4xx		Files specific to AMCC PowerPC 4xx CPUs
-    /lib		Architecture specific library files
-  /sh			Files generic to SH architecture
-    /cpu		CPU specific files
-      /sh2		Files specific to sh2 CPUs
-      /sh3		Files specific to sh3 CPUs
-      /sh4		Files specific to sh4 CPUs
-    /lib		Architecture specific library files
-  /sparc		Files generic to SPARC architecture
-    /cpu		CPU specific files
-      /leon2		Files specific to Gaisler LEON2 SPARC CPU
-      /leon3		Files specific to Gaisler LEON3 SPARC CPU
-    /lib		Architecture specific library files
-/api			Machine/arch independent API for external apps
-/board			Board dependent files
-/common			Misc architecture independent functions
-/disk			Code for disk drive partition handling
-/doc			Documentation (don't expect too much)
-/drivers		Commonly used device drivers
-/examples		Example code for standalone applications, etc.
-/fs			Filesystem code (cramfs, ext2, jffs2, etc.)
-/include		Header Files
-/lib			Files generic to all architectures
-  /libfdt		Library files to support flattened device trees
-  /lzma			Library files to support LZMA decompression
-  /lzo			Library files to support LZO decompression
-/net			Networking code
-/post			Power On Self Test
-/rtc			Real Time Clock drivers
-/tools			Tools to build S-Record or U-Boot images, etc.
+- api		Machine/arch independent API for external apps
+- board		Board dependent files
+- common	Misc architecture independent functions
+- cpu		CPU specific files
+  - 74xx_7xx	Files specific to Freescale MPC74xx and 7xx CPUs
+  - arm720t	Files specific to ARM 720 CPUs
+  - arm920t	Files specific to ARM 920 CPUs
+    - at91rm9200 Files specific to Atmel AT91RM9200 CPU
+    - imx	Files specific to Freescale MC9328 i.MX CPUs
+    - s3c24x0	Files specific to Samsung S3C24X0 CPUs
+  - arm925t	Files specific to ARM 925 CPUs
+  - arm926ejs	Files specific to ARM 926 CPUs
+  - arm1136	Files specific to ARM 1136 CPUs
+  - at32ap	Files specific to Atmel AVR32 AP CPUs
+  - blackfin	Files specific to Analog Devices Blackfin CPUs
+  - i386	Files specific to i386 CPUs
+  - ixp		Files specific to Intel XScale IXP CPUs
+  - leon2	Files specific to Gaisler LEON2 SPARC CPU
+  - leon3	Files specific to Gaisler LEON3 SPARC CPU
+  - mcf52x2	Files specific to Freescale ColdFire MCF52x2 CPUs
+  - mcf5227x	Files specific to Freescale ColdFire MCF5227x CPUs
+  - mcf532x	Files specific to Freescale ColdFire MCF5329 CPUs
+  - mcf5445x	Files specific to Freescale ColdFire MCF5445x CPUs
+  - mcf547x_8x	Files specific to Freescale ColdFire MCF547x_8x CPUs
+  - mips	Files specific to MIPS CPUs
+  - mpc5xx	Files specific to Freescale MPC5xx  CPUs
+  - mpc5xxx	Files specific to Freescale MPC5xxx CPUs
+  - mpc8xx	Files specific to Freescale MPC8xx  CPUs
+  - mpc8220	Files specific to Freescale MPC8220 CPUs
+  - mpc824x	Files specific to Freescale MPC824x CPUs
+  - mpc8260	Files specific to Freescale MPC8260 CPUs
+  - mpc85xx	Files specific to Freescale MPC85xx CPUs
+  - nios	Files specific to Altera NIOS CPUs
+  - nios2	Files specific to Altera Nios-II CPUs
+  - ppc4xx	Files specific to AMCC PowerPC 4xx CPUs
+  - pxa		Files specific to Intel XScale PXA CPUs
+  - s3c44b0	Files specific to Samsung S3C44B0 CPUs
+  - sa1100	Files specific to Intel StrongARM SA1100 CPUs
+- disk		Code for disk drive partition handling
+- doc		Documentation (don't expect too much)
+- drivers	Commonly used device drivers
+- examples	Example code for standalone applications, etc.
+- fs		Filesystem code (cramfs, ext2, jffs2, etc.)
+- include	Header Files
+- lib_arm	Files generic to ARM	 architecture
+- lib_avr32	Files generic to AVR32	 architecture
+- lib_blackfin	Files generic to Blackfin architecture
+- lib_generic	Files generic to all	 architectures
+- lib_i386	Files generic to i386	 architecture
+- lib_m68k	Files generic to m68k	 architecture
+- lib_microblaze Files generic to microblaze architecture
+- lib_mips	Files generic to MIPS	 architecture
+- lib_nios	Files generic to NIOS	 architecture
+- lib_nios2	Files generic to NIOS2	 architecture
+- lib_ppc	Files generic to PowerPC architecture
+- lib_sh	Files generic to SH	 architecture
+- lib_sparc	Files generic to SPARC	 architecture
+- libfdt	Library files to support flattened device trees
+- net		Networking code
+- post		Power On Self Test
+- rtc		Real Time Clock drivers
+- tools		Tools to build S-Record or U-Boot images, etc.

 Software Configuration:
 =======================
@@ -319,11 +295,6 @@ The following options need to be configured:
 			CONFIG_SYS_PQ2FADS	- PQ2FADS-ZU or PQ2FADS-VR
 			CONFIG_SYS_8272ADS	- MPC8272ADS

- Marvell Family Member
-		CONFIG_SYS_MVFS		- define it if you want to enable
-					  multiple fs option at one time
-					  for marvell soc family
-
 - MPC824X Family Member (if CONFIG_MPC824X is defined)
 		Define exactly one of
 		CONFIG_MPC8240, CONFIG_MPC8245
@@ -356,18 +327,6 @@ The following options need to be configured:
 		Define this option if you want to enable the
 		ICache only when Code runs from RAM.

- 85xx CPU Options:
-		CONFIG_SYS_FSL_TBCLK_DIV
-
-		Defines the core time base clock divider ratio compared to the
-		system clock.  On most PQ3 devices this is 8, on newer QorIQ
-		devices it can be 16 or 32.  The ratio varies from SoC to Soc.
-
-		CONFIG_SYS_FSL_PCIE_COMPAT
-
-		Defines the string to utilize when trying to match PCIe device
-		tree nodes for the given platform.
-
 - Intel Monahans options:
 		CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO

@@ -480,18 +439,6 @@ The following options need to be configured:
 		define this to a list of base addresses for each (supported)
 		port. See e.g. include/configs/versatile.h

-		CONFIG_PL011_SERIAL_RLCR
-
-		Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
-		have separate receive and transmit line control registers.  Set
-		this variable to initialize the extra register.
-
-		CONFIG_PL011_SERIAL_FLUSH_ON_INIT
-
-		On some platforms (e.g. U8500) U-Boot is loaded by a second stage
-		boot loader that has already initialized the UART.  Define this
-		variable to flush the UART at init time.
-

 - Console Interface:
 		Depending on board, define exactly one serial port
@@ -565,6 +512,25 @@ The following options need to be configured:
 		must be defined, to setup the maximum idle timeout for
 		the SMC.

+- Interrupt driven serial port input:
+		CONFIG_SERIAL_SOFTWARE_FIFO
+
+		PPC405GP only.
+		Use an interrupt handler for receiving data on the
+		serial port. It also enables using hardware handshake
+		(RTS/CTS) and UART's built-in FIFO. Set the number of
+		bytes the interrupt driven input buffer should have.
+
+		Leave undefined to disable this feature, including
+		disable the buffer and hardware handshake.
+
+- Console UART Number:
+		CONFIG_UART1_CONSOLE
+
+		AMCC PPC4xx only.
+		If defined internal UART1 (and not UART0) is used
+		as default U-Boot console.
+
 - Boot Delay:	CONFIG_BOOTDELAY - in seconds
 		Delay before automatically booting the default image;
 		set to -1 to disable autoboot.
@@ -649,7 +615,6 @@ The following options need to be configured:
 		CONFIG_CMD_BOOTD	  bootd
 		CONFIG_CMD_CACHE	* icache, dcache
 		CONFIG_CMD_CONSOLE	  coninfo
-		CONFIG_CMD_CRC32	* crc32
 		CONFIG_CMD_DATE		* support for RTC, date/time...
 		CONFIG_CMD_DHCP		* DHCP support
 		CONFIG_CMD_DIAG		* Diagnostics
@@ -662,27 +627,22 @@ The following options need to be configured:
 		CONFIG_CMD_EDITENV	  edit env variable
 		CONFIG_CMD_EEPROM	* EEPROM read/write support
 		CONFIG_CMD_ELF		* bootelf, bootvx
-		CONFIG_CMD_EXPORTENV	* export the environment
 		CONFIG_CMD_SAVEENV	  saveenv
 		CONFIG_CMD_FDC		* Floppy Disk Support
 		CONFIG_CMD_FAT		* FAT partition support
 		CONFIG_CMD_FDOS		* Dos diskette Support
 		CONFIG_CMD_FLASH	  flinfo, erase, protect
 		CONFIG_CMD_FPGA		  FPGA device initialization support
-		CONFIG_CMD_GO		* the 'go' command (exec code)
-		CONFIG_CMD_GREPENV	* search environment
 		CONFIG_CMD_HWFLOW	* RTS/CTS hw flow control
 		CONFIG_CMD_I2C		* I2C serial bus support
 		CONFIG_CMD_IDE		* IDE harddisk support
 		CONFIG_CMD_IMI		  iminfo
 		CONFIG_CMD_IMLS		  List all found images
 		CONFIG_CMD_IMMAP	* IMMR dump support
-		CONFIG_CMD_IMPORTENV	* import an environment
 		CONFIG_CMD_IRQ		* irqinfo
 		CONFIG_CMD_ITEST	  Integer/string test of 2 values
 		CONFIG_CMD_JFFS2	* JFFS2 Support
 		CONFIG_CMD_KGDB		* kgdb
-		CONFIG_CMD_LDRINFO	  ldrinfo (display Blackfin loader)
 		CONFIG_CMD_LOADB	  loadb
 		CONFIG_CMD_LOADS	  loads
 		CONFIG_CMD_MD5SUM	  print md5 message digest
@@ -710,12 +670,12 @@ The following options need to be configured:
 					  (requires CONFIG_CMD_I2C)
 		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
 					  (4xx only)
-		CONFIG_CMD_SHA1SUM	  print sha1 memory digest
+		CONFIG_CMD_SHA1		  print sha1 memory digest
 					  (requires CONFIG_CMD_MEMORY)
 		CONFIG_CMD_SOURCE	  "source" command Support
 		CONFIG_CMD_SPI		* SPI serial bus support
-		CONFIG_CMD_TFTPSRV	* TFTP transfer in server mode
 		CONFIG_CMD_USB		* USB support
+		CONFIG_CMD_VFD		* VFD support (TRAB)
 		CONFIG_CMD_CDP		* Cisco Discover Protocol support
 		CONFIG_CMD_FSL		* Microblaze FSL support

@@ -744,17 +704,10 @@ The following options need to be configured:
 - Watchdog:
 		CONFIG_WATCHDOG
 		If this variable is defined, it enables watchdog
-		support for the SoC. There must be support in the SoC
-		specific code for a watchdog. For the 8xx and 8260
-		CPUs, the SIU Watchdog feature is enabled in the SYPCR
-		register.  When supported for a specific SoC is
-		available, then no further board specific code should
-		be needed to use it.
-
-		CONFIG_HW_WATCHDOG
-		When using a watchdog circuitry external to the used
-		SoC, then define this variable and provide board
-		specific code for the "hw_watchdog_reset" function.
+		support. There must be support in the platform specific
+		code for a watchdog. For the 8xx and 8260 CPUs, the
+		SIU Watchdog feature is enabled in the SYPCR
+		register.

 - U-Boot Version:
 		CONFIG_VERSION_VARIABLE
@@ -780,8 +733,6 @@ The following options need to be configured:
 		CONFIG_RTC_ISL1208	- use Intersil ISL1208 RTC
 		CONFIG_RTC_MAX6900	- use Maxim, Inc. MAX6900 RTC
 		CONFIG_SYS_RTC_DS1337_NOOSC	- Turn off the OSC output for DS1337
-		CONFIG_SYS_RV3029_TCR	- enable trickle charger on
-					  RV3029 RTC.

 		Note that if the RTC uses I2C, then the I2C interface
 		must also be configured. See I2C Support, below.
@@ -790,10 +741,6 @@ The following options need to be configured:
 		CONFIG_PCA953X		- use NXP's PCA953X series I2C GPIO
 		CONFIG_PCA953X_INFO	- enable pca953x info command

-		The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of
-		chip-ngpio pairs that tell the PCA953X driver the number of
-		pins supported by a particular chip.
-
 		Note that if the GPIO device uses I2C, then the I2C interface
 		must also be configured. See I2C Support, below.

@@ -830,7 +777,7 @@ The following options need to be configured:
 		CONFIG_LBA48

 		Set this to enable support for disks larger than 137GB
-		Also look at CONFIG_SYS_64BIT_LBA.
+		Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
 		Whithout these , LBA48 support uses 32bit variables and will 'only'
 		support disks up to 2.1TB.

@@ -875,16 +822,6 @@ The following options need to be configured:

 - NETWORK Support (other):

-		CONFIG_DRIVER_AT91EMAC
-		Support for AT91RM9200 EMAC.
-
-			CONFIG_RMII
-			Define this to use reduced MII inteface
-
-			CONFIG_DRIVER_AT91EMAC_QUIET
-			If this defined, the driver is quiet.
-			The driver doen't show link status messages.
-
 		CONFIG_DRIVER_LAN91C96
 		Support for SMSC's LAN91C96 chips.

@@ -909,18 +846,6 @@ The following options need to be configured:
 			Define this to use i/o functions instead of macros
 			(some hardware wont work with macros)

-		CONFIG_FTGMAC100
-		Support for Faraday's FTGMAC100 Gigabit SoC Ethernet
-
-			CONFIG_FTGMAC100_EGIGA
-			Define this to use GE link update with gigabit PHY.
-			Define this if FTGMAC100 is connected to gigabit PHY.
-			If your system has 10/100 PHY only, it might not occur
-			wrong behavior. Because PHY usually return timeout or
-			useless data when polling gigabit status and gigabit
-			control registers. This behavior won't affect the
-			correctnessof 10/100 link speed update.
-
 		CONFIG_SMC911X
 		Support for SMSC's LAN911x and LAN921x chips

@@ -936,18 +861,6 @@ The following options need to be configured:
 			automatically converts one 32 bit word to two 16 bit
 			words you may also try CONFIG_SMC911X_32_BIT.

-		CONFIG_SH_ETHER
-		Support for Renesas on-chip Ethernet controller
-
-			CONFIG_SH_ETHER_USE_PORT
-			Define the number of ports to be used
-
-			CONFIG_SH_ETHER_PHY_ADDR
-			Define the ETH PHY's address
-
-			CONFIG_SH_ETHER_CACHE_WRITEBACK
-			If this option is set, the driver enables cache flush.
-
 - USB Support:
 		At the moment only the UHCI host controller is
 		supported (PIP405, MIP405, MPC5200); define
@@ -1113,25 +1026,6 @@ The following options need to be configured:
 		and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
 		or CONFIG_VIDEO_SED13806_16BPP

-		CONFIG_FSL_DIU_FB
-		Enable the Freescale DIU video driver.  Reference boards for
-		SOCs that have a DIU should define this macro to enable DIU
-		support, and should also define these other macros:
-
-			CONFIG_SYS_DIU_ADDR
-			CONFIG_VIDEO
-			CONFIG_CMD_BMP
-			CONFIG_CFB_CONSOLE
-			CONFIG_VIDEO_SW_CURSOR
-			CONFIG_VGA_AS_SINGLE_DEVICE
-			CONFIG_VIDEO_LOGO
-			CONFIG_VIDEO_BMP_LOGO
-
-		The DIU driver will look for the 'video-mode' environment
-		variable, and if defined, enable the DIU as a console during
-		boot.  See the documentation file README.video for a
-		description of this variable.
-
 - Keyboard Support:
 		CONFIG_KEYBOARD

@@ -1229,12 +1123,6 @@ The following options need to be configured:
 		images, gzipped BMP images can be displayed via the
 		splashscreen support or the bmp command.

- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8
-
-		If this option is set, 8-bit RLE compressed BMP images
-		can be displayed via the splashscreen support or the
-		bmp command.
-
 - Compression support:
 		CONFIG_BZIP2

@@ -1334,6 +1222,7 @@ The following options need to be configured:
 		driver in use must provide a function: mcast() to join/leave a
 		multicast group.

+		CONFIG_BOOTP_RANDOM_DELAY
 - BOOTP Recovery Mode:
 		CONFIG_BOOTP_RANDOM_DELAY

@@ -1488,11 +1377,10 @@ The following options need to be configured:
 		to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie
 		the CPU's i2c node address).

-		Now, the u-boot i2c code for the mpc8xx
-		(arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
-		and so its address should therefore be cleared to 0 (See,
-		eg, MPC823e User's Manual p.16-473). So, set
-		CONFIG_SYS_I2C_SLAVE to 0.
+		Now, the u-boot i2c code for the mpc8xx (cpu/mpc8xx/i2c.c)
+		sets the CPU up as a master node and so its address should
+		therefore be cleared to 0 (See, eg, MPC823e User's Manual
+		p.16-473). So, set CONFIG_SYS_I2C_SLAVE to 0.

 		CONFIG_SYS_I2C_INIT_MPC5XXX

@@ -1570,16 +1458,6 @@ The following options need to be configured:

 		#define I2C_DELAY  udelay(2)

-		CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA
-
-		If your arch supports the generic GPIO framework (asm/gpio.h),
-		then you may alternatively define the two GPIOs that are to be
-		used as SCL / SDA.  Any of the previous I2C_xxx macros will
-		have GPIO-based defaults assigned to them as appropriate.
-
-		You should define these to the GPIO value as given directly to
-		the generic GPIO functions.
-
 		CONFIG_SYS_I2C_INIT_BOARD

 		When a board is reset during an i2c bus transfer
@@ -1591,17 +1469,6 @@ The following options need to be configured:
 		custom i2c_init_board() routine in boards/xxx/board.c
 		is run early in the boot sequence.

-		CONFIG_SYS_I2C_BOARD_LATE_INIT
-
-		An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is
-		defined a custom i2c_board_late_init() routine in
-		boards/xxx/board.c is run AFTER the operations in i2c_init()
-		is completed. This callpoint can be used to unreset i2c bus
-		using CPU i2c controller register accesses for CPUs whose i2c
-		controller provide such a method. It is called at the end of
-		i2c_init() to allow i2c_init operations to setup the i2c bus
-		controller on the CPU (e.g. setting bus speed & slave address).
-
 		CONFIG_I2CFAST (PPC405GP|PPC405EP only)

 		This option enables configuration of bi_iic_fast[] flags
@@ -1722,11 +1589,6 @@ The following options need to be configured:
 		SPI EEPROM, also an instance works with Crystal A/D and
 		D/As on the SACSng board)

-		CONFIG_SH_SPI
-
-		Enables the driver for SPI controller on SuperH. Currently
-		only SH7757 is supported.
-
 		CONFIG_SPI_X

 		Enables extended (16-bit) SPI EEPROM addressing.
@@ -1876,7 +1738,7 @@ The following options need to be configured:

 			ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
 			HERMES, IP860, RPXlite, LWMON, LANTEC,
-			FLAGADM, TQM8260
+			PCU_E, FLAGADM, TQM8260

 - Error Recovery:
 		CONFIG_PANIC_HANG
@@ -2031,28 +1893,6 @@ The following options need to be configured:
 		example, some LED's) on your board. At the moment,
 		the following checkpoints are implemented:

- Standalone program support:
-		CONFIG_STANDALONE_LOAD_ADDR
-
-		This option allows to define board specific values
-		for the address where standalone program gets loaded,
-		thus overwriting the architecutre dependent default
-		settings.
-
- Frame Buffer Address:
-	CONFIG_FB_ADDR
-
-	Define CONFIG_FB_ADDR if you want to use specific address for
-	frame buffer.
-	Then system will reserve the frame buffer address to defined address
-	instead of lcd_setmem (this function grab the memory for frame buffer
-	by panel's size).
-
-	Please see board_init_f function.
-
-	If you want this config option then,
-	please define it at your board config file
-
 Legacy uImage format:

  Arg	Where			When
@@ -2084,9 +1924,9 @@ Legacy uImage format:
   13	common/image.c		Start multifile image verification
   14	common/image.c		No initial ramdisk, no multifile, continue.

-   15	arch/<arch>/lib/bootm.c	All preparation done, transferring control to OS
+   15	lib_<arch>/bootm.c	All preparation done, transferring control to OS

-  -30	arch/powerpc/lib/board.c	Fatal error, hang the system
+  -30	lib_ppc/board.c		Fatal error, hang the system
  -31	post/post.c		POST test failed, detected by post_output_backlog()
  -32	post/post.c		POST test failed, detected by post_run_single()

@@ -2229,7 +2069,7 @@ FIT uImage format:
 Modem Support:
 --------------

-[so far only for SMDK2400 boards]
+[so far only for SMDK2400 and TRAB boards]

 - Modem support enable:
 		CONFIG_MODEM_SUPPORT
@@ -2365,7 +2205,7 @@ Configuration Settings:
 - CONFIG_SYS_MONITOR_BASE:
 		Physical start address of boot monitor code (set by
 		make config files to be same as the text base address
-		(CONFIG_SYS_TEXT_BASE) used when linking) - same as
+		(TEXT_BASE) used when linking) - same as
 		CONFIG_SYS_FLASH_BASE when booting from flash.

 - CONFIG_SYS_MONITOR_LEN:
@@ -2390,23 +2230,7 @@ Configuration Settings:
 		used) must be put below this limit, unless "bootm_low"
 		enviroment variable is defined and non-zero. In such case
 		all data for the Linux kernel must be between "bootm_low"
-		and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.  The environment
-		variable "bootm_mapsize" will override the value of
-		CONFIG_SYS_BOOTMAPSZ.  If CONFIG_SYS_BOOTMAPSZ is undefined,
-		then the value in "bootm_size" will be used instead.
-
- CONFIG_SYS_BOOT_RAMDISK_HIGH:
-		Enable initrd_high functionality.  If defined then the
-		initrd_high feature is enabled and the bootm ramdisk subcommand
-		is enabled.
-
- CONFIG_SYS_BOOT_GET_CMDLINE:
-		Enables allocating and saving kernel cmdline in space between
-		"bootm_low" and "bootm_low" + BOOTMAPSZ.
-
- CONFIG_SYS_BOOT_GET_KBD:
-		Enables allocating and saving a kernel copy of the bd_info in
-		space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
+		and "bootm_low" + CONFIG_SYS_BOOTMAPSZ.

 - CONFIG_SYS_MAX_FLASH_BANKS:
 		Max number of Flash memory banks
@@ -2482,14 +2306,6 @@ Configuration Settings:
 		on high Ethernet traffic.
 		Defaults to 4 if not defined.

- CONFIG_ENV_MAX_ENTRIES
-
-	Maximum number of entries in the hash table that is used
-	internally to store the environment settings. The default
-	setting is supposed to be generous and should work in most
-	cases. This setting can be used to tune behaviour; see
-	lib/hashtable.c for details.
-
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
@@ -2631,19 +2447,6 @@ to save the current settings.
 	- CONFIG_SYS_EEPROM_SIZE:
 	  The size in bytes of the EEPROM device.

-	- CONFIG_ENV_EEPROM_IS_ON_I2C
-	  define this, if you have I2C and SPI activated, and your
-	  EEPROM, which holds the environment, is on the I2C bus.
-
-	- CONFIG_I2C_ENV_EEPROM_BUS
-	  if you have an Environment on an EEPROM reached over
-	  I2C muxes, you can define here, how to reach this
-	  EEPROM. For example:
-
-	  #define CONFIG_I2C_ENV_EEPROM_BUS	  "pca9547:70:d\0"
-
-	  EEPROM which holds the environment, is reached over
-	  a pca9547 i2c mux with address 0x70, channel 3.

 - CONFIG_ENV_IS_IN_DATAFLASH:

@@ -2667,32 +2470,18 @@ to save the current settings.
 	- CONFIG_ENV_SIZE:

 	  These two #defines specify the offset and size of the environment
-	  area within the first NAND device.  CONFIG_ENV_OFFSET must be
-	  aligned to an erase block boundary.
+	  area within the first NAND device.

-	- CONFIG_ENV_OFFSET_REDUND (optional):
+	- CONFIG_ENV_OFFSET_REDUND

 	  This setting describes a second storage area of CONFIG_ENV_SIZE
-	  size used to hold a redundant copy of the environment data, so
-	  that there is a valid backup copy in case there is a power failure
-	  during a "saveenv" operation.  CONFIG_ENV_OFFSET_RENDUND must be
-	  aligned to an erase block boundary.
+	  size used to hold a redundant copy of the environment data,
+	  so that there is a valid backup copy in case there is a
+	  power failure during a "saveenv" operation.

-	- CONFIG_ENV_RANGE (optional):
-
-	  Specifies the length of the region in which the environment
-	  can be written.  This should be a multiple of the NAND device's
-	  block size.  Specifying a range with more erase blocks than
-	  are needed to hold CONFIG_ENV_SIZE allows bad blocks within
-	  the range to be avoided.
-
-	- CONFIG_ENV_OFFSET_OOB (optional):
-
-	  Enables support for dynamically retrieving the offset of the
-	  environment from block zero's out-of-band data.  The
-	  "nand env.oob" command can be used to record this offset.
-	  Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
-	  using CONFIG_ENV_OFFSET_OOB.
+	Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned
+	to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
+	the NAND devices block size.

 - CONFIG_NAND_ENV_DST

@@ -2712,7 +2501,7 @@ to save the current settings.

 Please note that the environment is read-only until the monitor
 has been relocated to RAM and a RAM copy of the environment has been
-created; also, when using EEPROM you will have to use getenv_f()
+created; also, when using EEPROM you will have to use getenv_r()
 until then to read environment variables.

 The environment is protected by a CRC32 checksum. Before the monitor
@@ -2735,6 +2524,13 @@ use the "saveenv" command to store a valid environment.
 - CONFIG_SYS_FAULT_MII_ADDR:
 		MII address of the PHY to check for the Ethernet link state.

+- CONFIG_SYS_64BIT_VSPRINTF:
+		Makes vsprintf (and all *printf functions) support printing
+		of 64bit values by using the L quantifier
+
+- CONFIG_SYS_64BIT_STRTOUL:
+		Adds simple_strtoull that returns a 64bit value
+
 - CONFIG_NS16550_MIN_FUNCTIONS:
 		Define this if you desire to only have use of the NS16550_init
 		and NS16550_putc functions for the serial driver located at
@@ -2781,14 +2577,6 @@ Low Level (hardware related) configuration options:
 		source code. It is used to make hardware dependant
 		initializations.

- CONFIG_IDE_AHB:
-		Most IDE controllers were designed to be connected with PCI
-		interface. Only few of them were designed for AHB interface.
-		When software is doing ATA command and data transfer to
-		IDE devices through IDE-AHB controller, some additional
-		registers accessing to these kind of IDE-AHB controller
-		is requierd.
-
 - CONFIG_SYS_IMMR:	Physical address of the Internal Memory.
 		DO NOT CHANGE unless you know exactly what you're
 		doing! (11-4) [MPC8xx/82xx systems only]
@@ -2814,7 +2602,7 @@ Low Level (hardware related) configuration options:
 		area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually
 		CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial
 		data is located at the end of the available space
-		(sometimes written as (CONFIG_SYS_INIT_RAM_SIZE -
+		(sometimes written as (CONFIG_SYS_INIT_RAM_END -
 		CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just
 		below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR +
 		CONFIG_SYS_GBL_DATA_OFFSET) downward.
@@ -2893,30 +2681,12 @@ Low Level (hardware related) configuration options:
  CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
  CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
  CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
-		Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set.
+		Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.

 - CONFIG_PCI_DISABLE_PCIE:
 		Disable PCI-Express on systems where it is supported but not
 		required.

- CONFIG_SYS_SRIO:
-		Chip has SRIO or not
-
- CONFIG_SRIO1:
-		Board has SRIO 1 port available
-
- CONFIG_SRIO2:
-		Board has SRIO 2 port available
-
- CONFIG_SYS_SRIOn_MEM_VIRT:
-		Virtual Address of SRIO port 'n' memory region
-
- CONFIG_SYS_SRIOn_MEM_PHYS:
-		Physical Address of SRIO port 'n' memory region
-
- CONFIG_SYS_SRIOn_MEM_SIZE:
-		Size of SRIO port 'n' memory region
-
 - CONFIG_SPD_EEPROM
 		Get DDR timing information from an I2C EEPROM. Common
 		with pluggable memory modules such as SODIMMs
@@ -2982,27 +2752,23 @@ Low Level (hardware related) configuration options:
 		globally (CONFIG_CMD_MEM).

 - CONFIG_SKIP_LOWLEVEL_INIT
-		[ARM only] If this variable is defined, then certain
-		low level initializations (like setting up the memory
-		controller) are omitted and/or U-Boot does not
-		relocate itself into RAM.
+- CONFIG_SKIP_RELOCATE_UBOOT

-		Normally this variable MUST NOT be defined. The only
-		exception is when U-Boot is loaded (to RAM) by some
-		other boot loader or by a debugger which performs
-		these initializations itself.
+		[ARM only] If these variables are defined, then
+		certain low level initializations (like setting up
+		the memory controller) are omitted and/or U-Boot does
+		not relocate itself into RAM.
+		Normally these variables MUST NOT be defined. The
+		only exception is when U-Boot is loaded (to RAM) by
+		some other boot loader or by a debugger which
+		performs these initializations itself.

 - CONFIG_PRELOADER
+
 		Modifies the behaviour of start.S when compiling a loader
 		that is executed before the actual U-Boot. E.g. when
 		compiling a NAND SPL.

- CONFIG_USE_ARCH_MEMCPY
-  CONFIG_USE_ARCH_MEMSET
-		If these options are used a optimized version of memcpy/memset will
-		be used if available. These functions may be faster under some
-		conditions but may increase the binary size.
-
 Building the Software:
 ======================

@@ -3223,9 +2989,7 @@ environment. As long as you don't save the environment you are
 working with an in-memory copy. In case the Flash area containing the
 environment is erased by accident, a default environment is provided.

-Some configuration options can be set using Environment Variables.
-
-List of environment variables (most likely not complete):
+Some configuration options can be set using Environment Variables:

  baudrate	- see CONFIG_BAUDRATE

@@ -3243,16 +3007,7 @@ List of environment variables (most likely not complete):
 		  for use by the bootm command. See also "bootm_size"
 		  environment variable. Address defined by "bootm_low" is
 		  also the base of the initial memory mapping for the Linux
-		  kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and
-		  bootm_mapsize.
-
-  bootm_mapsize	- Size of the initial memory mapping for the Linux kernel.
-		  This variable is given as a hexadecimal number and it
-		  defines the size of the memory region starting at base
-		  address bootm_low that is accessible by the Linux kernel
-		  during early boot.  If unset, CONFIG_SYS_BOOTMAPSZ is used
-		  as the default value if it is defined, and bootm_size is
-		  used otherwise.
+		  kernel -- see the description of CONFIG_SYS_BOOTMAPSZ.

  bootm_size	- Memory range available for image processing in the bootm
 		  command can be restricted. This variable is given as
@@ -3337,16 +3092,16 @@ List of environment variables (most likely not complete):
 		  interface is currently active. For example you
 		  can do the following

-		  => setenv ethact FEC
-		  => ping 192.168.0.1 # traffic sent on FEC
-		  => setenv ethact SCC
-		  => ping 10.0.0.1 # traffic sent on SCC
+		  => setenv ethact FEC ETHERNET
+		  => ping 192.168.0.1 # traffic sent on FEC ETHERNET
+		  => setenv ethact SCC ETHERNET
+		  => ping 10.0.0.1 # traffic sent on SCC ETHERNET

  ethrotate	- When set to "no" U-Boot does not go through all
 		  available network interfaces.
 		  It just stays at the currently selected interface.

-  netretry	- When set to "no" each network operation will
+   netretry	- When set to "no" each network operation will
 		  either succeed or fail without retrying.
 		  When set to "once" the network operation will
 		  fail when all the available network interfaces
@@ -3362,18 +3117,7 @@ List of environment variables (most likely not complete):
  tftpdstport	- If this is set, the value is used for TFTP's UDP
 		  destination port instead of the Well Know Port 69.

-  tftpblocksize - Block size to use for TFTP transfers; if not set,
-		  we use the TFTP server's default block size
-
-  tftptimeout	- Retransmission timeout for TFTP packets (in milli-
-		  seconds, minimum value is 1000 = 1 second). Defines
-		  when a packet is considered to be lost so it has to
-		  be retransmitted. The default is 5000 = 5 seconds.
-		  Lowering this value may make downloads succeed
-		  faster in networks with high packet loss rates or
-		  with unreliable TFTP servers.
-
-  vlan		- When set to a value < 4095 the traffic over
+   vlan		- When set to a value < 4095 the traffic over
 		  Ethernet is encapsulated/received over 802.1q
 		  VLAN tagged frames.

@@ -3489,11 +3233,6 @@ o If both the SROM and the environment contain a MAC address, and the
 o If neither SROM nor the environment contain a MAC address, an error
  is raised.

-If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses
-will be programmed into hardware as part of the initialization process.  This
-may be skipped by setting the appropriate 'ethmacskip' environment variable.
-The naming convention is as follows:
-"ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc.

 Image Formats:
 ==============
@@ -3523,8 +3262,8 @@ details; basically, the header defines the following image properties:
  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
  INTEGRITY).
 * Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
-  IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
-  Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC).
+  IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
+  Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
 * Compression Type (uncompressed, gzip, bzip2)
 * Load Address
 * Entry Point
@@ -3575,7 +3314,7 @@ configure the Linux device drivers for use with your target hardware
 (no, we don't intend to provide a full virtual machine interface to
 Linux :-).

-But now you can ignore ALL boot loader code (in arch/powerpc/mbxboot).
+But now you can ignore ALL boot loader code (in arch/ppc/mbxboot).

 Just make sure your machine specific header file (for instance
 include/asm-ppc/tqm8xx.h) includes the same definition of the Board
@@ -3673,7 +3412,7 @@ So a typical call to build a U-Boot image would read:

 	-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
 	> -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
-	> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \
+	> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz \
 	> examples/uImage.TQM850L
 	Image Name:   2.4.4 kernel for TQM850L
 	Created:      Wed Jul 19 02:34:59 2000
@@ -3697,10 +3436,10 @@ speed for memory and install an UNCOMPRESSED image instead: this
 needs more space in Flash, but boots much faster since it does not
 need to be uncompressed:

-	-> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz
+	-> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz
 	-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
 	> -A ppc -O linux -T kernel -C none -a 0 -e 0 \
-	> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \
+	> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux \
 	> examples/uImage.TQM850L-uncompressed
 	Image Name:   2.4.4 kernel for TQM850L
 	Created:      Wed Jul 19 02:34:59 2000
@@ -4177,9 +3916,7 @@ For PowerPC, the following registers have specific use:
 	R30:	GOT pointer
 	R31:	frame pointer

-	(U-Boot also uses R12 as internal GOT pointer. r12
-	is a volatile register so r12 needs to be reset when
-	going back and forth between asm and C)
+	(U-Boot also uses R14 as internal GOT pointer.)

    ==> U-Boot will use R2 to hold a pointer to the global data

@@ -4209,14 +3946,6 @@ On ARM, the following registers are used:

    ==> U-Boot will use R8 to hold a pointer to the global data

-On Nios II, the ABI is documented here:
-	http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf
-
-    ==> U-Boot will use gp to hold a pointer to the global data
-
-    Note: on Nios II, we give "-G0" option to gcc and don't use gp
-    to access small data sections, so gp is free.
-
 NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
 or current versions of GCC may "optimize" the code too much.

--- a/api/Makefile
+++ b/api/Makefile
@@ -22,7 +22,7 @@

 include $(TOPDIR)/config.mk

-LIB	= $(obj)libapi.o
+LIB	= $(obj)libapi.a

 COBJS-$(CONFIG_API) += api.o api_net.o api_storage.o api_platform-$(ARCH).o

@@ -31,7 +31,7 @@ SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

 $(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
+	$(AR) $(ARFLAGS) $@ $(OBJS)

 # defines $(obj).depend target
 include $(SRCTREE)/rules.mk
--- a/api/api.c
+++ b/api/api.c
@@ -36,6 +36,9 @@
 #define DEBUG
 #undef DEBUG

+/* U-Boot routines needed */
+extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
 /*****************************************************************************
 *
 * This is the API core.
--- a/api/api_platform-powerpc.c
+++ b/api/api_platform-powerpc.c
--- a/arch/.gitignore
+++ b/arch/.gitignore
@@ -1,2 +0,0 @@
-/*/include/asm/arch
-/*/include/asm/proc
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -1,75 +0,0 @@
-#
-# (C) Copyright 2000-2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CROSS_COMPILE ?= arm-linux-
-
-ifndef CONFIG_STANDALONE_LOAD_ADDR
-ifeq ($(SOC),omap3)
-CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
-else
-CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
-endif
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
-
-# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb:
-PLATFORM_CPPFLAGS += $(call cc-option,-marm,)
-
-# Try if EABI is supported, else fall back to old API,
-# i. e. for example:
-# - with ELDK 4.2 (EABI supported), use:
-#	-mabi=aapcs-linux -mno-thumb-interwork
-# - with ELDK 4.1 (gcc 4.x, no EABI), use:
-#	-mabi=apcs-gnu -mno-thumb-interwork
-# - with ELDK 3.1 (gcc 3.x), use:
-#	-mapcs-32 -mno-thumb-interwork
-PLATFORM_CPPFLAGS += $(call cc-option,\
-				-mabi=aapcs-linux -mno-thumb-interwork,\
-				$(call cc-option,\
-					-mapcs-32,\
-					$(call cc-option,\
-						-mabi=apcs-gnu,\
-					)\
-				) $(call cc-option,-mno-thumb-interwork,)\
-			)
-
-# For EABI, make sure to provide raise()
-ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
-# This file is parsed several times; make sure to add only once.
-ifeq (,$(findstring arch/arm/lib/eabi_compat.o,$(PLATFORM_LIBS)))
-PLATFORM_LIBS += $(OBJTREE)/arch/arm/lib/eabi_compat.o
-endif
-endif
-
-ifdef CONFIG_SYS_LDSCRIPT
-# need to strip off double quotes
-LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
-else
-LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
-endif
-
-# needed for relocation
-ifndef CONFIG_NAND_SPL
-LDFLAGS_u-boot += -pie
-endif
--- a/arch/arm/cpu/arm1136/Makefile
+++ b/arch/arm/cpu/arm1136/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-COBJS	= cpu.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm1136/cpu.c
+++ b/arch/arm/cpu/arm1136/cpu.c
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Insturments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	disable_interrupts ();
-
-#ifdef CONFIG_LCD
-	{
-		extern void lcd_disable(void);
-		extern void lcd_panel_disable(void);
-
-		lcd_disable(); /* proper disable of lcd & panel */
-		lcd_panel_disable();
-	}
-#endif
-
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-	/* flush I/D-cache */
-	cache_flush();
-
-	return 0;
-}
-
-static void cache_flush(void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c10, 0": :"r" (i)); /* clean entire data cache */
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));  /* invalidate both caches and flush btb */
-	asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
-}
--- a/arch/arm/cpu/arm1136/mx31/Makefile
+++ b/arch/arm/cpu/arm1136/mx31/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	+= generic.o
-COBJS	+= timer.o
-COBJS	+= devices.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/io.h>
-
-static u32 mx31_decode_pll(u32 reg, u32 infreq)
-{
-	u32 mfi = (reg >> 10) & 0xf;
-	u32 mfn = reg & 0x3ff;
-	u32 mfd = (reg >> 16) & 0x3ff;
-	u32 pd =  (reg >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-	mfd += 1;
-	pd += 1;
-
-	return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
-		(mfd * pd)) << 10;
-}
-
-static u32 mx31_get_mpl_dpdgck_clk(void)
-{
-	u32 infreq;
-
-	if ((__REG(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
-		infreq = CONFIG_MX31_CLK32 * 1024;
-	else
-		infreq = CONFIG_MX31_HCLK_FREQ;
-
-	return mx31_decode_pll(__REG(CCM_MPCTL), infreq);
-}
-
-static u32 mx31_get_mcu_main_clk(void)
-{
-	/* For now we assume mpl_dpdgck_clk == mcu_main_clk
-	 * which should be correct for most boards
-	 */
-	return mx31_get_mpl_dpdgck_clk();
-}
-
-u32 mx31_get_ipg_clk(void)
-{
-	u32 freq = mx31_get_mcu_main_clk();
-	u32 pdr0 = __REG(CCM_PDR0);
-
-	freq /= ((pdr0 >> 3) & 0x7) + 1;
-	freq /= ((pdr0 >> 6) & 0x3) + 1;
-
-	return freq;
-}
-
-void mx31_dump_clocks(void)
-{
-	u32 cpufreq = mx31_get_mcu_main_clk();
-	printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000);
-	printf("ipg clock     : %dHz\n", mx31_get_ipg_clk());
-}
-
-void mx31_gpio_mux(unsigned long mode)
-{
-	unsigned long reg, shift, tmp;
-
-	reg = IOMUXC_BASE + (mode & 0x1fc);
-	shift = (~mode & 0x3) * 8;
-
-	tmp = __REG(reg);
-	tmp &= ~(0xff << shift);
-	tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
-	__REG(reg) = tmp;
-}
-
-void mx31_set_pad(enum iomux_pins pin, u32 config)
-{
-	u32 field, l, reg;
-
-	pin &= IOMUX_PADNUM_MASK;
-	reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4;
-	field = (pin + 2) % 3;
-
-	l = __REG(reg);
-	l &= ~(0x1ff << (field * 10));
-	l |= config << (field * 10);
-	__REG(reg) = l;
-
-}
-
-struct mx3_cpu_type mx31_cpu_type[] = {
-	{ .srev = 0x00, .v = 0x10 },
-	{ .srev = 0x10, .v = 0x11 },
-	{ .srev = 0x11, .v = 0x11 },
-	{ .srev = 0x12, .v = 0x1F },
-	{ .srev = 0x13, .v = 0x1F },
-	{ .srev = 0x14, .v = 0x12 },
-	{ .srev = 0x15, .v = 0x12 },
-	{ .srev = 0x28, .v = 0x20 },
-	{ .srev = 0x29, .v = 0x20 },
-};
-
-u32 get_cpu_rev(void)
-{
-	u32 i, srev;
-
-	/* read SREV register from IIM module */
-	struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
-	srev = readl(&iim->iim_srev);
-
-	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
-		if (srev == mx31_cpu_type[i].srev)
-			return mx31_cpu_type[i].v;
-
-	return srev | 0x8000;
-}
-
-static char *get_reset_cause(void)
-{
-	/* read RCSR register from CCM module */
-	struct clock_control_regs *ccm =
-		(struct clock_control_regs *)CCM_BASE;
-
-	u32 cause = readl(&ccm->rcsr) & 0x07;
-
-	switch (cause) {
-	case 0x0000:
-		return "POR";
-	case 0x0001:
-		return "RST";
-	case 0x0002:
-		return "WDOG";
-	case 0x0006:
-		return "JTAG";
-	default:
-		return "unknown reset";
-	}
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo (void)
-{
-	u32 srev = get_cpu_rev();
-
-	printf("CPU:   Freescale i.MX31 rev %d.%d%s at %d MHz.",
-			(srev & 0xF0) >> 4, (srev & 0x0F),
-			((srev & 0x8000) ? " unknown" : ""),
-			mx31_get_mcu_main_clk() / 1000000);
-	printf("Reset cause: %s\n", get_reset_cause());
-	return 0;
-}
-#endif
--- a/arch/arm/cpu/arm1136/mx31/timer.c
+++ b/arch/arm/cpu/arm1136/mx31/timer.c
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-#include <div64.h>
-#include <watchdog.h>
-#include <asm/io.h>
-
-#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
-
-/* General purpose timers registers */
-#define GPTCR	__REG(TIMER_BASE)		/* Control register	*/
-#define GPTPR	__REG(TIMER_BASE + 0x4)		/* Prescaler register	*/
-#define GPTSR	__REG(TIMER_BASE + 0x8)		/* Status register	*/
-#define GPTCNT	__REG(TIMER_BASE + 0x24)	/* Counter register	*/
-
-/* General purpose timers bitfields */
-#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
-#define GPTCR_FRR		(1 << 9)	/* Freerun / restart	*/
-#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source		*/
-#define GPTCR_TEN		1		/* Timer enable		*/
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */
-#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
-/* ~0.4% error - measured with stop-watch on 100s boot-delay */
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	tick *= CONFIG_SYS_HZ;
-	do_div(tick, CONFIG_MX31_CLK32);
-	return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
-	time *= CONFIG_MX31_CLK32;
-	do_div(time, CONFIG_SYS_HZ);
-	return time;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
-	us = us * CONFIG_MX31_CLK32 + 999999;
-	do_div(us, 1000000);
-	return us;
-}
-#else
-/* ~2% error */
-#define TICK_PER_TIME	((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
-#define US_PER_TICK	(1000000 / CONFIG_MX31_CLK32)
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	do_div(tick, TICK_PER_TIME);
-	return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
-	return time * TICK_PER_TIME;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
-	us += US_PER_TICK - 1;
-	do_div(us, US_PER_TICK);
-	return us;
-}
-#endif
-
-/* The 32768Hz 32-bit timer overruns in 131072 seconds */
-int timer_init (void)
-{
-	int i;
-
-	/* setup GP Timer 1 */
-	GPTCR = GPTCR_SWR;
-	for (i = 0; i < 100; i++)
-		GPTCR = 0; /* We have no udelay by now */
-	GPTPR = 0; /* 32Khz */
-	/* Freerun Mode, PERCLK1 input */
-	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
-
-	return 0;
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	gd->lastinc = GPTCNT; /* capture current incrementer value time */
-	gd->tbl = 0; /* start "advancing" time stamp from 0 */
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-unsigned long long get_ticks (void)
-{
-	ulong now = GPTCNT; /* current tick value */
-
-	if (now >= gd->lastinc)	/* normal mode (non roll) */
-		/* move stamp forward with absolut diff ticks */
-		gd->tbl += (now - gd->lastinc);
-	else			/* we have rollover of incrementer */
-		gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
-}
-
-ulong get_timer_masked (void)
-{
-	/*
-	 * get_ticks() returns a long long (64 bit), it wraps in
-	 * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
-	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
-	 * 5 * 10^6 days - long enough.
-	 */
-	return tick_to_time(get_ticks());
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	gd->tbl = time_to_tick(t);
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay (unsigned long usec)
-{
-	unsigned long long tmp;
-	ulong tmo;
-
-	tmo = us_to_tick(usec);
-	tmp = get_ticks() + tmo;	/* get current timestamp */
-
-	while (get_ticks() < tmp)	/* loop till event */
-		 /*NOP*/;
-}
-
-void reset_cpu (ulong addr)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE;
-	wdog->wcr = WDOG_ENABLE;
-	while (1)
-		;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-void mxc_hw_watchdog_enable(void)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE;
-	u16 secs;
-
-	/*
-	 * The timer watchdog can be set between
-	 * 0.5 and 128 Seconds. If not defined
-	 * in configuration file, sets 64 Seconds
-	 */
-#ifdef CONFIG_SYS_WD_TIMER_SECS
-	secs = (CONFIG_SYS_WD_TIMER_SECS << 1) & 0xFF;
-	if (!secs) secs = 1;
-#else
-	secs = 64;
-#endif
-	writew(readw(&wdog->wcr) | (secs << WDOG_WT_SHIFT) | WDOG_ENABLE,
-		&wdog->wcr);
-}
-
-
-void mxc_hw_watchdog_reset(void)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE;
-
-	writew(0x5555, &wdog->wsr);
-	writew(0xAAAA, &wdog->wsr);
-}
-#endif
--- a/arch/arm/cpu/arm1136/mx35/Makefile
+++ b/arch/arm/cpu/arm1136/mx35/Makefile
@@ -1,63 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	+= generic.o
-COBJS	+= timer.o
-COBJS	+= iomux.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-$(OBJS) : $(TOPDIR)/include/asm/arch/asm-offsets.h
-
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
-
-$(TOPDIR)/include/asm/arch/asm-offsets.h:	$(TOPDIR)/include/autoconf.mk.dep \
-	./asm-offsets.s
-	@echo Generating $@
-	$(TOPDIR)/tools/scripts/make-asm-offsets ./asm-offsets.s $@
-
-asm-offsets.s:	$(TOPDIR)/include/autoconf.mk.dep \
-	./asm-offsets.c
-	$(CC) -DDO_DEPS_ONLY \
-		$(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
-		-o $@ ./asm-offsets.c -c -S
--- a/arch/arm/cpu/arm1136/mx35/asm-offsets.c
+++ b/arch/arm/cpu/arm1136/mx35/asm-offsets.c
@@ -1,43 +0,0 @@
-/*
- * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c
- *
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-#include <linux/kbuild.h>
-
-int main(void)
-{
-
-	/* Round up to make sure size gives nice stack alignment */
-	DEFINE(CLKCTL_CCMR, offsetof(struct ccm_regs, ccmr));
-	DEFINE(CLKCTL_PDR0, offsetof(struct ccm_regs, pdr0));
-	DEFINE(CLKCTL_PDR1, offsetof(struct ccm_regs, pdr1));
-	DEFINE(CLKCTL_PDR2, offsetof(struct ccm_regs, pdr2));
-	DEFINE(CLKCTL_PDR3, offsetof(struct ccm_regs, pdr3));
-	DEFINE(CLKCTL_PDR4, offsetof(struct ccm_regs, pdr4));
-	DEFINE(CLKCTL_RCSR, offsetof(struct ccm_regs, rcsr));
-	DEFINE(CLKCTL_MPCTL, offsetof(struct ccm_regs, mpctl));
-	DEFINE(CLKCTL_PPCTL, offsetof(struct ccm_regs, ppctl));
-	DEFINE(CLKCTL_ACMR, offsetof(struct ccm_regs, acmr));
-	DEFINE(CLKCTL_COSR, offsetof(struct ccm_regs, cosr));
-	DEFINE(CLKCTL_CGR0, offsetof(struct ccm_regs, cgr0));
-	DEFINE(CLKCTL_CGR1, offsetof(struct ccm_regs, cgr1));
-	DEFINE(CLKCTL_CGR2, offsetof(struct ccm_regs, cgr2));
-
-	return 0;
-}
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@@ -1,463 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <netdev.h>
-
-#define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel))
-#define CLK_CODE_ARM(c)		(((c) >> 16) & 0xFF)
-#define CLK_CODE_AHB(c)		(((c) >>  8) & 0xFF)
-#define CLK_CODE_PATH(c)	((c) & 0xFF)
-
-#define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o))
-
-#ifdef CONFIG_FSL_ESDHC
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-static int g_clk_mux_auto[8] = {
-	CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1,
-	CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1,
-};
-
-static int g_clk_mux_consumer[16] = {
-	CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1,
-	-1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0),
-	CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1,
-	-1, -1, CLK_CODE(4, 2, 0), -1,
-};
-
-static int hsp_div_table[3][16] = {
-	{4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1},
-	{-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1},
-	{3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1},
-};
-
-u32 get_cpu_rev(void)
-{
-	int reg;
-	struct iim_regs *iim =
-		(struct iim_regs *)IIM_BASE_ADDR;
-	reg = readl(&iim->iim_srev);
-	if (!reg) {
-		reg = readw(ROMPATCH_REV);
-		reg <<= 4;
-	} else {
-		reg += CHIP_REV_1_0;
-	}
-
-	return 0x35000 + (reg & 0xFF);
-}
-
-static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd)
-{
-	int *pclk_mux;
-	if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
-		pclk_mux = g_clk_mux_consumer +
-			((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
-			MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
-	} else {
-		pclk_mux = g_clk_mux_auto +
-			((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >>
-			MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET);
-	}
-
-	if ((*pclk_mux) == -1)
-		return -1;
-
-	if (fi && fd) {
-		if (!CLK_CODE_PATH(*pclk_mux)) {
-			*fi = *fd = 1;
-			return CLK_CODE_ARM(*pclk_mux);
-		}
-		if (pdr0 & MXC_CCM_PDR0_AUTO_CON) {
-			*fi = 3;
-			*fd = 4;
-		} else {
-			*fi = 2;
-			*fd = 3;
-		}
-	}
-	return CLK_CODE_ARM(*pclk_mux);
-}
-
-static int get_ahb_div(u32 pdr0)
-{
-	int *pclk_mux;
-
-	pclk_mux = g_clk_mux_consumer +
-		((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >>
-		MXC_CCM_PDR0_CON_MUX_DIV_OFFSET);
-
-	if ((*pclk_mux) == -1)
-		return -1;
-
-	return CLK_CODE_AHB(*pclk_mux);
-}
-
-static u32 decode_pll(u32 reg, u32 infreq)
-{
-	u32 mfi = (reg >> 10) & 0xf;
-	u32 mfn = reg & 0x3f;
-	u32 mfd = (reg >> 16) & 0x3f;
-	u32 pd = (reg >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-	mfd += 1;
-	pd += 1;
-
-	return ((2 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000;
-}
-
-static u32 get_mcu_main_clk(void)
-{
-	u32 arm_div = 0, fi = 0, fd = 0;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd);
-	fi *=
-		decode_pll(readl(&ccm->mpctl),
-			CONFIG_MX35_HCLK_FREQ);
-	return fi / (arm_div * fd);
-}
-
-static u32 get_ipg_clk(void)
-{
-	u32 freq = get_mcu_main_clk();
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 pdr0 = readl(&ccm->pdr0);
-
-	return freq / (get_ahb_div(pdr0) * 2);
-}
-
-static u32 get_ipg_per_clk(void)
-{
-	u32 freq = get_mcu_main_clk();
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 pdr0 = readl(&ccm->pdr0);
-	u32 pdr4 = readl(&ccm->pdr4);
-	u32 div;
-	if (pdr0 & MXC_CCM_PDR0_PER_SEL) {
-		div = (CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_PER0_PRDF_MASK,
-			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1) *
-			(CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_PER0_PODF_MASK,
-			MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1);
-	} else {
-		div = CCM_GET_DIVIDER(pdr0,
-			MXC_CCM_PDR0_PER_PODF_MASK,
-			MXC_CCM_PDR0_PER_PODF_OFFSET) + 1;
-		freq /= get_ahb_div(pdr0);
-	}
-	return freq / div;
-}
-
-u32 imx_get_uartclk(void)
-{
-	u32 freq;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 pdr4 = readl(&ccm->pdr4);
-
-	if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U) {
-		freq = get_mcu_main_clk();
-	} else {
-		freq = decode_pll(readl(&ccm->ppctl),
-			CONFIG_MX35_HCLK_FREQ);
-	}
-	freq /= ((CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_UART_PRDF_MASK,
-			MXC_CCM_PDR4_UART_PRDF_OFFSET) + 1) *
-		(CCM_GET_DIVIDER(pdr4,
-			MXC_CCM_PDR4_UART_PODF_MASK,
-			MXC_CCM_PDR4_UART_PODF_OFFSET) + 1));
-	return freq;
-}
-
-unsigned int mxc_get_main_clock(enum mxc_main_clocks clk)
-{
-	u32 nfc_pdf, hsp_podf;
-	u32 pll, ret_val = 0, usb_prdf, usb_podf;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-
-	u32 reg = readl(&ccm->pdr0);
-	u32 reg4 = readl(&ccm->pdr4);
-
-	reg |= 0x1;
-
-	switch (clk) {
-	case CPU_CLK:
-		ret_val = get_mcu_main_clk();
-		break;
-	case AHB_CLK:
-		ret_val = get_mcu_main_clk();
-		break;
-	case HSP_CLK:
-		if (reg & CLKMODE_CONSUMER) {
-			hsp_podf = (reg >> 20) & 0x3;
-			pll = get_mcu_main_clk();
-			hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF];
-			if (hsp_podf > 0) {
-				ret_val = pll / hsp_podf;
-			} else {
-				puts("mismatch HSP with ARM clock setting\n");
-				ret_val = 0;
-			}
-		} else {
-			ret_val = get_mcu_main_clk();
-		}
-		break;
-	case IPG_CLK:
-		ret_val = get_ipg_clk();;
-		break;
-	case IPG_PER_CLK:
-		ret_val = get_ipg_per_clk();
-		break;
-	case NFC_CLK:
-		nfc_pdf = (reg4 >> 28) & 0xF;
-		pll = get_mcu_main_clk();
-		/* AHB/nfc_pdf */
-		ret_val = pll / (nfc_pdf + 1);
-		break;
-	case USB_CLK:
-		usb_prdf = (reg4 >> 25) & 0x7;
-		usb_podf = (reg4 >> 22) & 0x7;
-		if (reg4 & 0x200) {
-			pll = get_mcu_main_clk();
-		} else {
-			pll = decode_pll(readl(&ccm->ppctl),
-				CONFIG_MX35_HCLK_FREQ);
-		}
-
-		ret_val = pll / ((usb_prdf + 1) * (usb_podf + 1));
-		break;
-	default:
-		printf("Unknown clock: %d\n", clk);
-		break;
-	}
-
-	return ret_val;
-}
-unsigned int mxc_get_peri_clock(enum mxc_peri_clocks clk)
-{
-	u32 ret_val = 0, pdf, pre_pdf, clk_sel;
-	struct ccm_regs *ccm =
-		(struct ccm_regs *)IMX_CCM_BASE;
-	u32 mpdr2 = readl(&ccm->pdr2);
-	u32 mpdr3 = readl(&ccm->pdr3);
-	u32 mpdr4 = readl(&ccm->pdr4);
-
-	switch (clk) {
-	case UART1_BAUD:
-	case UART2_BAUD:
-	case UART3_BAUD:
-		clk_sel = mpdr3 & (1 << 14);
-		pre_pdf = (mpdr4 >> 13) & 0x7;
-		pdf = (mpdr4 >> 10) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case SSI1_BAUD:
-		pre_pdf = (mpdr2 >> 24) & 0x7;
-		pdf = mpdr2 & 0x3F;
-		clk_sel = mpdr2 & (1 << 6);
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case SSI2_BAUD:
-		pre_pdf = (mpdr2 >> 27) & 0x7;
-		pdf = (mpdr2 >> 8) & 0x3F;
-		clk_sel = mpdr2 & (1 << 6);
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case CSI_BAUD:
-		clk_sel = mpdr2 & (1 << 7);
-		pre_pdf = (mpdr2 >> 16) & 0x7;
-		pdf = (mpdr2 >> 19) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case MSHC_CLK:
-		pre_pdf = readl(&ccm->pdr1);
-		clk_sel = (pre_pdf & 0x80);
-		pdf = (pre_pdf >> 22) & 0x3F;
-		pre_pdf = (pre_pdf >> 28) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case ESDHC1_CLK:
-		clk_sel = mpdr3 & 0x40;
-		pre_pdf = mpdr3 & 0x7;
-		pdf = (mpdr3>>3) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case ESDHC2_CLK:
-		clk_sel = mpdr3 & 0x40;
-		pre_pdf = (mpdr3 >> 8) & 0x7;
-		pdf = (mpdr3 >> 11) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case ESDHC3_CLK:
-		clk_sel = mpdr3 & 0x40;
-		pre_pdf = (mpdr3 >> 16) & 0x7;
-		pdf = (mpdr3 >> 19) & 0x7;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	case SPDIF_CLK:
-		clk_sel = mpdr3 & 0x400000;
-		pre_pdf = (mpdr3 >> 29) & 0x7;
-		pdf = (mpdr3 >> 23) & 0x3F;
-		ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) :
-			decode_pll(readl(&ccm->ppctl), CONFIG_MX35_HCLK_FREQ)) /
-				((pre_pdf + 1) * (pdf + 1));
-		break;
-	default:
-		printf("%s(): This clock: %d not supported yet\n",
-				__func__, clk);
-		break;
-	}
-
-	return ret_val;
-}
-
-unsigned int mxc_get_clock(enum mxc_clock clk)
-{
-	switch (clk) {
-	case MXC_ARM_CLK:
-		return get_mcu_main_clk();
-	case MXC_AHB_CLK:
-		break;
-	case MXC_IPG_CLK:
-		return get_ipg_clk();
-	case MXC_IPG_PERCLK:
-		return get_ipg_per_clk();
-	case MXC_UART_CLK:
-		return imx_get_uartclk();
-	case MXC_ESDHC_CLK:
-		return mxc_get_peri_clock(ESDHC1_CLK);
-	case MXC_USB_CLK:
-		return mxc_get_main_clock(USB_CLK);
-	case MXC_FEC_CLK:
-		return get_ipg_clk();
-	case MXC_CSPI_CLK:
-		return get_ipg_clk();
-	}
-	return -1;
-}
-
-#ifdef CONFIG_FEC_MXC
-/*
- * The MX35 has no fuse for MAC, return a NULL MAC
- */
-void imx_get_mac_from_fuse(unsigned char *mac)
-{
-	memset(mac, 0, 6);
-}
-
-u32 imx_get_fecclk(void)
-{
-	return mxc_get_clock(MXC_IPG_CLK);
-}
-#endif
-
-int do_mx35_showclocks(cmd_tbl_t *cmdtp,
-	int flag, int argc, char * const argv[])
-{
-	u32 cpufreq = get_mcu_main_clk();
-	printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000);
-	printf("ipg clock     : %dHz\n", get_ipg_clk());
-	printf("ipg per clock : %dHz\n", get_ipg_per_clk());
-	printf("uart clock    : %dHz\n", mxc_get_clock(MXC_UART_CLK));
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	clockinfo,	CONFIG_SYS_MAXARGS,	1,	do_mx35_showclocks,
-	"display clocks\n",
-	""
-);
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	printf("CPU:   Freescale i.MX35 at %d MHz\n",
-		get_mcu_main_clk() / 1000000);
-	/* mxc_dump_clocks(); */
-	return 0;
-}
-#endif
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-
-int cpu_eth_init(bd_t *bis)
-{
-	int rc = -ENODEV;
-
-#if defined(CONFIG_FEC_MXC)
-	rc = fecmxc_initialize(bis);
-#endif
-
-	return rc;
-}
-
-int get_clocks(void)
-{
-#ifdef CONFIG_FSL_ESDHC
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-#endif
-	return 0;
-}
-
-void reset_cpu(ulong addr)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR;
-	writew(4, &wdog->wcr);
-}
--- a/arch/arm/cpu/arm1136/mx35/iomux.c
+++ b/arch/arm/cpu/arm1136/mx35/iomux.c
@@ -1,116 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/mx35_pins.h>
-#include <asm/arch/iomux.h>
-
-/*
- * IOMUX register (base) addresses
- */
-enum iomux_reg_addr {
-	IOMUXGPR = IOMUXC_BASE_ADDR,			/* General purpose */
-	IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR + 4,		/* MUX control */
-	IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + 0x324,	/* last MUX control */
-	IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + 0x328,	/* Pad control */
-	IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x794,	/* last Pad control */
-	IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7AC,	/* input select */
-	IOMUXSW_INPUT_END = IOMUXC_BASE_ADDR + 0x9F4,	/* last input select */
-};
-
-#define MUX_PIN_NUM_MAX		\
-		(((IOMUXSW_PAD_END - IOMUXSW_PAD_CTL) >> 2) + 1)
-#define MUX_INPUT_NUM_MUX	\
-		(((IOMUXSW_INPUT_END - IOMUXSW_INPUT_CTL) >> 2) + 1)
-
-#define PIN_TO_IOMUX_INDEX(pin) ((PIN_TO_IOMUX_PAD(pin) - 0x328) >> 2)
-
-/*
- * Request ownership for an IO pin. This function has to be the first one
- * being called before that pin is used.
- */
-void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
-	u32 mux_reg = PIN_TO_IOMUX_MUX(pin);
-
-	if (mux_reg != NON_MUX_I) {
-		mux_reg += IOMUXGPR;
-		writel(cfg, mux_reg);
-	}
-}
-
-/*
- * Release ownership for an IO pin
- */
-void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg)
-{
-}
-
-/*
- * This function configures the pad value for a IOMUX pin.
- *
- * @param  pin     a pin number as defined in iomux_pin_name_t
- * @param  config  the ORed value of elements defined in iomux_pad_config_t
- */
-void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config)
-{
-	u32 pad_reg = IOMUXGPR + PIN_TO_IOMUX_PAD(pin);
-
-	writel(config, pad_reg);
-}
-
-/*
- * This function enables/disables the general purpose function for a particular
- * signal.
- *
- * @param  gp   one signal as defined in iomux_gp_func_t
- * @param  en   enable/disable
- */
-void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en)
-{
-	u32 l;
-
-	l = readl(IOMUXGPR);
-	if (en)
-		l |= gp;
-	else
-		l &= ~gp;
-
-	writel(l, IOMUXGPR);
-}
-
-/*
- * This function configures input path.
- *
- * @param input index of input select register as defined in
- *			iomux_input_select_t
- * @param config the binary value of elements defined in
- *			iomux_input_config_t
- */
-void mxc_iomux_set_input(iomux_input_select_t input, u32 config)
-{
-	u32 reg = IOMUXSW_INPUT_CTL + (input << 2);
-
-	writel(config, reg);
-}
--- a/arch/arm/cpu/arm1136/mx35/timer.c
+++ b/arch/arm/cpu/arm1136/mx35/timer.c
@@ -1,120 +0,0 @@
-/*
- * (C) Copyright 2007
- * Sascha Hauer, Pengutronix
- *
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-
-/* General purpose timers bitfields */
-#define GPTCR_SWR       (1<<15)	/* Software reset */
-#define GPTCR_FRR       (1<<9)	/* Freerun / restart */
-#define GPTCR_CLKSOURCE_32   (0x100<<6)	/* Clock source */
-#define GPTCR_CLKSOURCE_IPG (0x001<<6)	/* Clock source */
-#define GPTCR_TEN       (1)	/* Timer enable */
-#define GPTPR_VAL	(66)
-
-int timer_init(void)
-{
-	int i;
-	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
-
-	/* setup GP Timer 1 */
-	writel(GPTCR_SWR, &gpt->ctrl);
-	for (i = 0; i < 100; i++)
-		writel(0, &gpt->ctrl);	/* We have no udelay by now */
-
-	writel(GPTPR_VAL, &gpt->pre);
-	/* Freerun Mode, PERCLK1 input */
-	writel(readl(&gpt->ctrl) |
-		GPTCR_CLKSOURCE_IPG | GPTCR_TEN,
-		&gpt->ctrl);
-
-	return 0;
-}
-
-void reset_timer_masked(void)
-{
-	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
-
-	writel(0, &gpt->ctrl);
-	/* Freerun Mode, PERCLK1 input */
-	writel(GPTCR_CLKSOURCE_IPG | GPTCR_TEN,
-		&gpt->ctrl);
-}
-
-inline ulong get_timer_masked(void)
-{
-
-	struct gpt_regs *gpt = (struct gpt_regs *)GPT1_BASE_ADDR;
-	ulong val = readl(&gpt->counter);
-
-	return val;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	ulong tmp;
-
-	tmp = get_timer_masked();
-
-	if (tmp <= (base * 1000)) {
-		/* Overflow */
-		tmp += (0xffffffff -  base);
-	}
-
-	return (tmp / 1000) - base;
-}
-
-void set_timer(ulong t)
-{
-}
-
-/*
- * delay x useconds AND preserve advance timstamp value
- * GPTCNT is now supposed to tick 1 by 1 us.
- */
-void __udelay(unsigned long usec)
-{
-	ulong tmp;
-
-	tmp = get_timer_masked();	/* get current timestamp */
-
-	/* if setting this forward will roll time stamp */
-	if ((usec + tmp + 1) < tmp) {
-		/* reset "advancing" timestamp to 0, set lastinc value */
-		reset_timer_masked();
-	} else {
-		/* else, set advancing stamp wake up time */
-		tmp += usec;
-	}
-
-	while (get_timer_masked() < tmp)	/* loop till event */
-		 /*NOP*/;
-}
--- a/arch/arm/cpu/arm1136/omap24xx/Makefile
+++ b/arch/arm/cpu/arm1136/omap24xx/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	= reset.o
-
-COBJS	= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm1136/omap24xx/timer.c
+++ b/arch/arm/cpu/arm1136/omap24xx/timer.c
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/omap2420.h>
-
-#define TIMER_LOAD_VAL 0
-
-/* macro to read the 32 bit timer */
-#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR)))
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int timer_init (void)
-{
-	int32_t val;
-
-	/* Start the counter ticking up */
-	*((int32_t *) (CONFIG_SYS_TIMERBASE + TLDR)) = TIMER_LOAD_VAL;	/* reload value on overflow*/
-	val = (CONFIG_SYS_PTV << 2) | BIT5 | BIT1 | BIT0;		/* mask to enable timer*/
-	*((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val;	/* start timer */
-
-	reset_timer_masked(); /* init the timestamp and lastinc value */
-
-	return(0);
-}
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	gd->tbl	= t;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay (unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	if (usec >= 1000) {		/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;	/* start to normalize for usec to ticks per sec */
-		tmo *= CONFIG_SYS_HZ;	/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;		/* finish normalize. */
-	} else {			/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CONFIG_SYS_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer (0);		/* get current timestamp */
-	if ( (tmo + tmp + 1) < tmp )	/* if setting this forward will roll time stamp */
-		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastinc value */
-	else
-		tmo	+= tmp;		/* else, set advancing stamp wake up time */
-	while (get_timer_masked () < tmo)/* loop till event */
-		/*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	gd->lastinc = READ_TIMER;	/* capture current incrementer value time */
-	gd->tbl = 0;			/* start "advancing" time stamp from 0 */
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;		/* current tick value */
-
-	if (now >= gd->lastinc)		/* normal mode (non roll) */
-		gd->tbl += (now - gd->lastinc); /* move stamp fordward with absoulte diff ticks */
-	else				/* we have rollover of incrementer */
-		gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CONFIG_SYS_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CONFIG_SYS_HZ;
-		tmo /= (1000*1000);
-	}
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-	tbclk = CONFIG_SYS_HZ;
-	return tbclk;
-}
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -1,522 +0,0 @@
-/*
- *  armboot - Startup Code for OMP2420/ARM1136 CPU-core
- *
- *  Copyright (c) 2004	Texas Instruments <r-woodruff2@ti.com>
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
- *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
- *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-.globl _start
-_start: b	reset
-#ifdef CONFIG_PRELOADER
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-	ldr	pc, _hang
-
-_hang:
-	.word	do_hang
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678
-	.word	0x12345678	/* now 16*4=64 */
-#else
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-_pad:			.word 0x12345678 /* now 16*4=64 */
-#endif	/* CONFIG_PRELOADER */
-.global _end_vect
-_end_vect:
-
-	.balignl 16,0xdeadbeef
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * setup Memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-#ifdef CONFIG_OMAP2420H4
-       /* Copy vectors to mask ROM indirect addr */
-	adr	r0, _start		/* r0 <- current position of code   */
-		add     r0, r0, #4				/* skip reset vector			*/
-	mov	r2, #64			/* r2 <- size to copy  */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
-	mov	r3, #SRAM_OFFSET1
-	add	r1, r1, r3
-	mov	r3, #SRAM_OFFSET2
-	add	r1, r1, r3
-next:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	bne	next			/* loop until equal */
-	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
-#endif
-	/* the mask ROM code should have PLL and others stable */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl  cpu_init_crit
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_PRELOADER
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-#endif	/* #ifndef CONFIG_PRELOADER */
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
-	ldr     r0, _nand_boot_ofs
-	mov	pc, r0
-
-_nand_boot_ofs:
-	.word nand_boot
-#else
-jump_2_ram:
-	ldr	r0, _board_init_r_ofs
-	ldr     r1, _TEXT_BASE
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-#endif
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* Invalidate I+D+BTB caches */
-	mcr	p15, 0, r0, c8, c7, 0	/* Invalidate Unified TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/*
-	 * Jump to board specific initialization... The Mask ROM will have already initialized
-	 * basic memory.  Go here to bump up clock rate and handle wake up conditions.
-	 */
-	mov	ip, lr		/* persevere link reg across call */
-	bl	lowlevel_init	/* go setup pll,mux,memory */
-	mov	lr, ip		/* restore link */
-	mov	pc, lr		/* back to my caller */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_PRELOADER
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE		@ carve out a frame on current user stack
-	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
-
-	ldr	r2, IRQ_STACK_START_IN		@ set base 2 words into abort stack
-	ldmia	r2, {r2 - r3}			@ get values for "aborted" pc and cpsr (into parm regs)
-	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp				@ save current stack into r0 (param register)
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add	r8, sp, #S_PC			@ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
-	stmdb	r8, {sp, lr}^			@ Calling SP, LR
-	str	lr, [r8, #0]			@ Save calling PC
-	mrs	r6, spsr
-	str	r6, [r8, #4]			@ Save CPSR
-	str	r0, [r8, #8]			@ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack (enter in banked mode)
-
-	str	lr, [r13]			@ save caller lr in position 0 of saved stack
-	mrs	lr, spsr			@ get the spsr
-	str	lr, [r13, #4]			@ save spsr in position 1 of saved stack
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13			@ switch modes, make sure moves will execute
-	mov	lr, pc				@ capture return pc
-	movs	pc, lr				@ jump to next instruction & switch modes.
-	.endm
-
-	.macro get_bad_stack_swi
-	sub	r13, r13, #4			@ space on current stack for scratch reg.
-	str	r0, [r13]			@ save R0's value.
-	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
-	str	lr, [r0]			@ save caller lr in position 0 of saved stack
-	mrs	r0, spsr			@ get the spsr
-	str	lr, [r0, #4]			@ save spsr in position 1 of saved stack
-	ldr	r0, [r13]			@ restore r0
-	add	r13, r13, #4			@ pop stack entry
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-#endif	/* CONFIG_PRELOADER */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_PRELOADER
-	.align	5
-do_hang:
-	ldr	sp, _TEXT_BASE			/* use 32 words about stack */
-	bl	hang				/* hang and never return */
-#else	/* !CONFIG_PRELOADER */
-	.align	5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack_swi
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-	.align 5
-.global arm1136_cache_flush
-arm1136_cache_flush:
-#if !defined(CONFIG_SYS_NO_ICACHE)
-		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I cache
-#endif
-#if !defined(CONFIG_SYS_NO_DCACHE)
-		mcr	p15, 0, r1, c7, c14, 0	@ invalidate D cache
-#endif
-		mov	pc, lr			@ back to caller
-#endif	/* CONFIG_PRELOADER */
--- a/arch/arm/cpu/arm1136/u-boot.lds
+++ b/arch/arm/cpu/arm1136/u-boot.lds
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2009
- * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- *
- * Copyright (C) 2005-2007 Samsung Electronics
- * Kyungin Park <kyugnmin.park@samsung.com>
- *
- * Copyright (c) 2004 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		arch/arm/cpu/arm1136/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	}
-
-	. = ALIGN(4);
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end__ = .;
-	}
-
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
--- a/arch/arm/cpu/arm1176/Makefile
+++ b/arch/arm/cpu/arm1176/Makefile
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-COBJS	= cpu.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm1176/cpu.c
+++ b/arch/arm/cpu/arm1176/cpu.c
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Insturments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/system.h>
-
-static void cache_flush (void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-	/* flush I/D-cache */
-	cache_flush();
-
-	return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	/* invalidate both caches and flush btb */
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (0));
-	/* mem barrier to sync things */
-	asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0));
-}
--- a/arch/arm/cpu/arm1176/s3c64xx/Makefile
+++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	= reset.o
-
-COBJS-$(CONFIG_S3C6400)	+= cpu_init.o speed.o
-COBJS-y	+= timer.o
-
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm1176/s3c64xx/reset.S
+++ b/arch/arm/cpu/arm1176/s3c64xx/reset.S
@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2009 Samsung Electronics.
- * Minkyu Kang <mk7.kang@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/s3c6400.h>
-
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, =ELFIN_CLOCK_POWER_BASE
-	ldr	r2, [r1, #SYS_ID_OFFSET]
-	ldr	r3, =0xffff
-	and	r2, r3, r2, lsr #12
-	str	r2, [r1, #SW_RST_OFFSET]
-_loop_forever:
-	b	_loop_forever
--- a/arch/arm/cpu/arm1176/s3c64xx/speed.c
+++ b/arch/arm/cpu/arm1176/s3c64xx/speed.c
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same PLL and clock machinery inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-#include <asm/arch/s3c6400.h>
-
-#define APLL 0
-#define MPLL 1
-#define EPLL 2
-
-/* ------------------------------------------------------------------------- */
-/*
- * NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-static ulong get_PLLCLK(int pllreg)
-{
-	ulong r, m, p, s;
-
-	switch (pllreg) {
-	case APLL:
-		r = APLL_CON_REG;
-		break;
-	case MPLL:
-		r = MPLL_CON_REG;
-		break;
-	case EPLL:
-		r = EPLL_CON0_REG;
-		break;
-	default:
-		hang();
-	}
-
-	m = (r >> 16) & 0x3ff;
-	p = (r >> 8) & 0x3f;
-	s = r & 0x7;
-
-	return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s)));
-}
-
-/* return ARMCORE frequency */
-ulong get_ARMCLK(void)
-{
-	ulong div;
-
-	div = CLK_DIV0_REG;
-
-	return get_PLLCLK(APLL) / ((div & 0x7) + 1);
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
-	return get_PLLCLK(APLL);
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	ulong fclk;
-
-	uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
-	uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1;
-
-	/*
-	 * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on
-	 * s3c6400 and is always 0, and it is indeed running in ASYNC mode
-	 */
-	if (OTHERS_REG & 0x80)
-		fclk = get_FCLK();		/* SYNC Mode	*/
-	else
-		fclk = get_PLLCLK(MPLL);	/* ASYNC Mode	*/
-
-	return fclk / (hclk_div * hclkx2_div);
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-	ulong fclk;
-	uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
-	uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1;
-
-	if (OTHERS_REG & 0x80)
-		fclk = get_FCLK();		/* SYNC Mode	*/
-	else
-		fclk = get_PLLCLK(MPLL);	/* ASYNC Mode	*/
-
-	return fclk / (hclkx2_div * pre_div);
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-	return get_PLLCLK(EPLL);
-}
-
-int print_cpuinfo(void)
-{
-	printf("\nCPU:     S3C6400@%luMHz\n", get_ARMCLK() / 1000000);
-	printf("         Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ",
-	       get_FCLK() / 1000000, get_HCLK() / 1000000,
-	       get_PCLK() / 1000000);
-
-	if (OTHERS_REG & 0x80)
-		printf("(SYNC Mode) \n");
-	else
-		printf("(ASYNC Mode) \n");
-	return 0;
-}
--- a/arch/arm/cpu/arm1176/s3c64xx/timer.c
+++ b/arch/arm/cpu/arm1176/s3c64xx/timer.c
@@ -1,177 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/proc-armv/ptrace.h>
-#include <asm/arch/s3c6400.h>
-#include <div64.h>
-
-static ulong timer_load_val;
-
-#define PRESCALER	167
-
-static s3c64xx_timers *s3c64xx_get_base_timers(void)
-{
-	return (s3c64xx_timers *)ELFIN_TIMER_BASE;
-}
-
-/* macro to read the 16 bit timer */
-static inline ulong read_timer(void)
-{
-	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
-
-	return timers->TCNTO4;
-}
-
-/* Internal tick units */
-/* Last decremneter snapshot */
-static unsigned long lastdec;
-/* Monotonic incrementing timer */
-static unsigned long long timestamp;
-
-int timer_init(void)
-{
-	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
-
-	/* use PWM Timer 4 because it has no output */
-	/*
-	 * We use the following scheme for the timer:
-	 * Prescaler is hard fixed at 167, divider at 1/4.
-	 * This gives at PCLK frequency 66MHz approx. 10us ticks
-	 * The timer is set to wrap after 100s, at 66MHz this obviously
-	 * happens after 10,000,000 ticks. A long variable can thus
-	 * keep values up to 40,000s, i.e., 11 hours. This should be
-	 * enough for most uses:-) Possible optimizations: select a
-	 * binary-friendly frequency, e.g., 1ms / 128. Also calculate
-	 * the prescaler automatically for other PCLK frequencies.
-	 */
-	timers->TCFG0 = PRESCALER << 8;
-	if (timer_load_val == 0) {
-		timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */
-		timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000;
-	}
-
-	/* load value for 10 ms timeout */
-	lastdec = timers->TCNTB4 = timer_load_val;
-	/* auto load, manual update of Timer 4 */
-	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO |
-		TCON_4_UPDATE;
-
-	/* auto load, start Timer 4 */
-	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON;
-	timestamp = 0;
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	ulong now = read_timer();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	/* We overrun in 100s */
-	return (ulong)(timer_load_val / 100);
-}
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	lastdec = read_timer();
-	timestamp = 0;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer_masked(void)
-{
-	unsigned long long res = get_ticks();
-	do_div (res, (timer_load_val / (100 * CONFIG_SYS_HZ)));
-	return res;
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t * (timer_load_val / (100 * CONFIG_SYS_HZ));
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long tmp;
-	ulong tmo;
-
-	tmo = (usec + 9) / 10;
-	tmp = get_ticks() + tmo;	/* get current timestamp */
-
-	while (get_ticks() < tmp)/* loop till event */
-		 /*NOP*/;
-}
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -1,578 +0,0 @@
-/*
- *  armboot - Startup Code for ARM1176 CPU-core
- *
- * Copyright (c) 2007	Samsung Electronics
- *
- * Copyright (C) 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com)
- * 2007-09-21 - Added MoviNAND and OneNAND boot codes by
- * jsgood (jsgood.yang@samsung.com)
- * Base codes by scsuh (sc.suh)
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-#ifdef CONFIG_ENABLE_MMU
-#include <asm/proc/domain.h>
-#endif
-
-#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
-#define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
-#endif
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-.globl _start
-_start: b	reset
-#ifndef CONFIG_NAND_SPL
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:
-	.word undefined_instruction
-_software_interrupt:
-	.word software_interrupt
-_prefetch_abort:
-	.word prefetch_abort
-_data_abort:
-	.word data_abort
-_not_used:
-	.word not_used
-_irq:
-	.word irq
-_fiq:
-	.word fiq
-_pad:
-	.word 0x12345678 /* now 16*4=64 */
-#else
-	. = _start + 64
-#endif
-
-.global _end_vect
-_end_vect:
-	.balignl 16,0xdeadbeef
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * setup Memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * Below variable is very important because we use MMU in U-Boot.
- * Without it, we cannot run code correctly before MMU is ON.
- * by scsuh.
- */
-_TEXT_PHY_BASE:
-	.word	CONFIG_SYS_PHY_UBOOT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0, cpsr
-	bic	r0, r0, #0x3f
-	orr	r0, r0, #0xd3
-	msr	cpsr, r0
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-cpu_init_crit:
-	/*
-	 * When booting from NAND - it has definitely been a reset, so, no need
-	 * to flush caches and disable the MMU
-	 */
-#ifndef CONFIG_NAND_SPL
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-
-	/* Prepare to disable the MMU */
-	adr	r2, mmu_disable_phys
-	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
-	b	mmu_disable
-
-	.align 5
-	/* Run in a single cache-line */
-mmu_disable:
-	mcr	p15, 0, r0, c1, c0, 0
-	nop
-	nop
-	mov	pc, r2
-mmu_disable_phys:
-
-#ifdef CONFIG_DISABLE_TCM
-	/*
-	 * Disable the TCMs
-	 */
-	mrc	p15, 0, r0, c0, c0, 2	/* Return TCM details */
-	cmp	r0, #0
-	beq	skip_tcmdisable
-	mov	r1, #0
-	mov	r2, #1
-	tst	r0, r2
-	mcrne	p15, 0, r1, c9, c1, 1	/* Disable Instruction TCM if present*/
-	tst	r0, r2, LSL #16
-	mcrne	p15, 0, r1, c9, c1, 0	/* Disable Data TCM if present*/
-skip_tcmdisable:
-#endif
-#endif
-
-#ifdef CONFIG_PERIPORT_REMAP
-	/* Peri port setup */
-	ldr	r0, =CONFIG_PERIPORT_BASE
-	orr	r0, r0, #CONFIG_PERIPORT_SIZE
-	mcr	p15,0,r0,c15,c2,4
-#endif
-
-	/*
-	 * Go setup Memory and board specific bits prior to relocation.
-	 */
-	bl	lowlevel_init		/* go setup pll,mux,memory */
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_PRELOADER
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-#ifdef CONFIG_ENABLE_MMU
-enable_mmu:
-	/* enable domain access */
-	ldr	r5, =0x0000ffff
-	mcr	p15, 0, r5, c3, c0, 0	/* load domain access register */
-
-	/* Set the TTB register */
-	ldr	r0, _mmu_table_base
-	ldr	r1, =CONFIG_SYS_PHY_UBOOT_BASE
-	ldr	r2, =0xfff00000
-	bic	r0, r0, r2
-	orr	r1, r0, r1
-	mcr	p15, 0, r1, c2, c0, 0
-
-	/* Enable the MMU */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #1		/* Set CR_M to enable MMU */
-
-	/* Prepare to enable the MMU */
-	adr	r1, skip_hw_init
-	and	r1, r1, #0x3fc
-	ldr	r2, _TEXT_BASE
-	ldr	r3, =0xfff00000
-	and	r2, r2, r3
-	orr	r2, r2, r1
-	b	mmu_enable
-
-	.align 5
-	/* Run in a single cache-line */
-mmu_enable:
-
-	mcr	p15, 0, r0, c1, c0, 0
-	nop
-	nop
-	mov	pc, r2
-skip_hw_init:
-#endif
-
-clear_bss:
-#ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
-#ifndef CONFIG_NAND_SPL
-	bl coloured_LED_init
-	bl red_LED_on
-#endif
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
-	ldr     pc, _nand_boot
-
-_nand_boot: .word nand_boot
-#else
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add     lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-#endif
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-#ifdef CONFIG_ENABLE_MMU
-_mmu_table_base:
-	.word mmu_table
-#endif
-
-#ifndef CONFIG_NAND_SPL
-/*
- * we assume that cache operation is done before. (eg. cleanup_before_linux())
- * actually, we don't need to do anything about cache if not use d-cache in
- * U-Boot. So, in this function we clean only MMU. by scsuh
- *
- * void	theLastJump(void *kernel, int arch_num, uint boot_params);
- */
-#ifdef CONFIG_ENABLE_MMU
-	.globl theLastJump
-theLastJump:
-	mov	r9, r0
-	ldr	r3, =0xfff00000
-	ldr	r4, _TEXT_PHY_BASE
-	adr	r5, phy_last_jump
-	bic	r5, r5, r3
-	orr	r5, r5, r4
-	mov	pc, r5
-phy_last_jump:
-	/*
-	 * disable MMU stuff
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
-	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
-	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
-	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
-	mcr	p15, 0, r0, c1, c0, 0
-
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	mov	r0, #0
-	mov	pc, r9
-#endif
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- */
-
-	.macro	bad_save_user_regs
-	/* carve out a frame on current user stack */
-	sub	sp, sp, #S_FRAME_SIZE
-	/* Save user registers (now in svc mode) r0-r12 */
-	stmia	sp, {r0 - r12}
-
-	ldr	r2, IRQ_STACK_START_IN
-	/* get values for "aborted" pc and cpsr (into parm regs) */
-	ldmia	r2, {r2 - r3}
-	/* grab pointer to old stack */
-	add	r0, sp, #S_FRAME_SIZE
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	/* save sp_SVC, lr_SVC, pc, cpsr */
-	stmia	r5, {r0 - r3}
-	/* save current stack into r0 (param register) */
-	mov	r0, sp
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	/* save caller lr in position 0 of saved stack */
-	str	lr, [r13]
-	/* get the spsr */
-	mrs	lr, spsr
-	/* save spsr in position 1 of saved stack */
-	str	lr, [r13, #4]
-
-	/* prepare SVC-Mode */
-	mov	r13, #MODE_SVC
-	@ msr	spsr_c, r13
-	/* switch modes, make sure moves will execute */
-	msr	spsr, r13
-	/* capture return pc */
-	mov	lr, pc
-	/* jump to next instruction & switch modes. */
-	movs	pc, lr
-	.endm
-
-	.macro get_bad_stack_swi
-	/* space on current stack for scratch reg. */
-	sub	r13, r13, #4
-	/* save R0's value. */
-	str	r0, [r13]
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-	/* save caller lr in position 0 of saved stack */
-	str	lr, [r0]
-	/* get the spsr */
-	mrs	r0, spsr
-	/* save spsr in position 1 of saved stack */
-	str	lr, [r0, #4]
-	/* restore r0 */
-	ldr	r0, [r13]
-	/* pop stack entry */
-	add	r13, r13, #4
-	.endm
-
-/*
- * exception handlers
- */
-	.align	5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack_swi
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-#endif /* CONFIG_NAND_SPL */
--- a/arch/arm/cpu/arm1176/tnetv107x/Makefile
+++ b/arch/arm/cpu/arm1176/tnetv107x/Makefile
@@ -1,44 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	+= aemif.o clock.o init.o mux.o timer.o wdt.o
-SOBJS	+= lowlevel_init.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm1176/tnetv107x/aemif.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/aemif.c
@@ -1,93 +0,0 @@
-/*
- * TNETV107X: Asynchronous EMIF Configuration
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mux.h>
-
-#define ASYNC_EMIF_BASE			TNETV107X_ASYNC_EMIF_CNTRL_BASE
-#define ASYNC_EMIF_CONFIG(cs)		(ASYNC_EMIF_BASE+0x10+(cs)*4)
-#define ASYNC_EMIF_ONENAND_CONTROL	(ASYNC_EMIF_BASE+0x5c)
-#define ASYNC_EMIF_NAND_CONTROL		(ASYNC_EMIF_BASE+0x60)
-#define ASYNC_EMIF_WAITCYCLE_CONFIG	(ASYNC_EMIF_BASE+0x4)
-
-#define CONFIG_SELECT_STROBE(v)		((v) ? 1 << 31 : 0)
-#define CONFIG_EXTEND_WAIT(v)		((v) ? 1 << 30 : 0)
-#define CONFIG_WR_SETUP(v)		(((v) & 0x0f) << 26)
-#define CONFIG_WR_STROBE(v)		(((v) & 0x3f) << 20)
-#define CONFIG_WR_HOLD(v)		(((v) & 0x07) << 17)
-#define CONFIG_RD_SETUP(v)		(((v) & 0x0f) << 13)
-#define CONFIG_RD_STROBE(v)		(((v) & 0x3f) << 7)
-#define CONFIG_RD_HOLD(v)		(((v) & 0x07) << 4)
-#define CONFIG_TURN_AROUND(v)		(((v) & 0x03) << 2)
-#define CONFIG_WIDTH(v)			(((v) & 0x03) << 0)
-
-#define NUM_CS				4
-
-#define set_config_field(reg, field, val)			\
-	do {							\
-		if (val != -1) {				\
-			reg &= ~CONFIG_##field(0xffffffff);	\
-			reg |=	CONFIG_##field(val);		\
-		}						\
-	} while (0)
-
-void configure_async_emif(int cs, struct async_emif_config *cfg)
-{
-	unsigned long tmp;
-
-	if (cfg->mode == ASYNC_EMIF_MODE_NAND) {
-		tmp = __raw_readl(ASYNC_EMIF_NAND_CONTROL);
-		tmp |= (1 << cs);
-		__raw_writel(tmp, ASYNC_EMIF_NAND_CONTROL);
-
-	} else if (cfg->mode == ASYNC_EMIF_MODE_ONENAND) {
-		tmp = __raw_readl(ASYNC_EMIF_ONENAND_CONTROL);
-		tmp |= (1 << cs);
-		__raw_writel(tmp, ASYNC_EMIF_ONENAND_CONTROL);
-	}
-
-	tmp = __raw_readl(ASYNC_EMIF_CONFIG(cs));
-
-	set_config_field(tmp, SELECT_STROBE,	cfg->select_strobe);
-	set_config_field(tmp, EXTEND_WAIT,	cfg->extend_wait);
-	set_config_field(tmp, WR_SETUP,		cfg->wr_setup);
-	set_config_field(tmp, WR_STROBE,	cfg->wr_strobe);
-	set_config_field(tmp, WR_HOLD,		cfg->wr_hold);
-	set_config_field(tmp, RD_SETUP,		cfg->rd_setup);
-	set_config_field(tmp, RD_STROBE,	cfg->rd_strobe);
-	set_config_field(tmp, RD_HOLD,		cfg->rd_hold);
-	set_config_field(tmp, TURN_AROUND,	cfg->turn_around);
-	set_config_field(tmp, WIDTH,		cfg->width);
-
-	__raw_writel(tmp, ASYNC_EMIF_CONFIG(cs));
-}
-
-void init_async_emif(int num_cs, struct async_emif_config *config)
-{
-	int cs;
-
-	clk_enable(TNETV107X_LPSC_AEMIF);
-
-	for (cs = 0; cs < num_cs; cs++)
-		configure_async_emif(cs, config + cs);
-}
--- a/arch/arm/cpu/arm1176/tnetv107x/clock.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c
@@ -1,451 +0,0 @@
-/*
- * TNETV107X: Clock management APIs
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm-generic/errno.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/arch/clock.h>
-
-#define CLOCK_BASE		TNETV107X_CLOCK_CONTROL_BASE
-#define PSC_BASE		TNETV107X_PSC_BASE
-
-#define BIT(x)			(1 << (x))
-
-#define MAX_PREDIV		64
-#define MAX_POSTDIV		8
-#define MAX_MULT		512
-#define MAX_DIV			(MAX_PREDIV * MAX_POSTDIV)
-
-/* LPSC registers */
-#define PSC_PTCMD		0x120
-#define PSC_PTSTAT		0x128
-#define PSC_MDSTAT(n)		(0x800 + (n) * 4)
-#define PSC_MDCTL(n)		(0xA00 + (n) * 4)
-
-#define PSC_MDCTL_LRSTZ		BIT(8)
-
-#define psc_reg_read(reg)	__raw_readl((u32 *)(PSC_BASE + (reg)))
-#define psc_reg_write(reg, val)	__raw_writel(val, (u32 *)(PSC_BASE + (reg)))
-
-/* SSPLL registers */
-struct sspll_regs {
-	u32	modes;
-	u32	postdiv;
-	u32	prediv;
-	u32	mult_factor;
-	u32	divider_range;
-	u32	bw_divider;
-	u32	spr_amount;
-	u32	spr_rate_div;
-	u32	diag;
-};
-
-/* SSPLL base addresses */
-static struct sspll_regs *sspll_regs[] = {
-	(struct sspll_regs *)(CLOCK_BASE + 0x040),
-	(struct sspll_regs *)(CLOCK_BASE + 0x080),
-	(struct sspll_regs *)(CLOCK_BASE + 0x0c0),
-};
-
-#define sspll_reg(pll, reg)		(&(sspll_regs[pll]->reg))
-#define sspll_reg_read(pll, reg)	__raw_readl(sspll_reg(pll, reg))
-#define sspll_reg_write(pll, reg, val)	__raw_writel(val, sspll_reg(pll, reg))
-
-
-/* PLL Control Registers */
-struct pllctl_regs {
-	u32	ctl;		/* 00 */
-	u32	ocsel;		/* 04 */
-	u32	secctl;		/* 08 */
-	u32	__pad0;
-	u32	mult;		/* 10 */
-	u32	prediv;		/* 14 */
-	u32	div1;		/* 18 */
-	u32	div2;		/* 1c */
-	u32	div3;		/* 20 */
-	u32	oscdiv1;	/* 24 */
-	u32	postdiv;	/* 28 */
-	u32	bpdiv;		/* 2c */
-	u32	wakeup;		/* 30 */
-	u32	__pad1;
-	u32	cmd;		/* 38 */
-	u32	stat;		/* 3c */
-	u32	alnctl;		/* 40 */
-	u32	dchange;	/* 44 */
-	u32	cken;		/* 48 */
-	u32	ckstat;		/* 4c */
-	u32	systat;		/* 50 */
-	u32	ckctl;		/* 54 */
-	u32	__pad2[2];
-	u32	div4;		/* 60 */
-	u32	div5;		/* 64 */
-	u32	div6;		/* 68 */
-	u32	div7;		/* 6c */
-	u32	div8;		/* 70 */
-};
-
-struct lpsc_map {
-	int	pll, div;
-};
-
-static struct pllctl_regs *pllctl_regs[] = {
-	(struct pllctl_regs *)(CLOCK_BASE + 0x700),
-	(struct pllctl_regs *)(CLOCK_BASE + 0x300),
-	(struct pllctl_regs *)(CLOCK_BASE + 0x500),
-};
-
-#define pllctl_reg(pll, reg)		(&(pllctl_regs[pll]->reg))
-#define pllctl_reg_read(pll, reg)	__raw_readl(pllctl_reg(pll, reg))
-#define pllctl_reg_write(pll, reg, val)	__raw_writel(val, pllctl_reg(pll, reg))
-
-#define pllctl_reg_rmw(pll, reg, mask, val)			\
-	pllctl_reg_write(pll, reg,				\
-		(pllctl_reg_read(pll, reg) & ~(mask)) | val)
-
-#define pllctl_reg_setbits(pll, reg, mask)			\
-	pllctl_reg_rmw(pll, reg, 0, mask)
-
-#define pllctl_reg_clrbits(pll, reg, mask)			\
-	pllctl_reg_rmw(pll, reg, mask, 0)
-
-/* PLLCTL Bits */
-#define PLLCTL_CLKMODE		BIT(8)
-#define PLLCTL_PLLSELB		BIT(7)
-#define PLLCTL_PLLENSRC		BIT(5)
-#define PLLCTL_PLLDIS		BIT(4)
-#define PLLCTL_PLLRST		BIT(3)
-#define PLLCTL_PLLPWRDN		BIT(1)
-#define PLLCTL_PLLEN		BIT(0)
-
-#define PLLDIV_ENABLE		BIT(15)
-
-static int pll_div_offset[] = {
-#define div_offset(reg)	offsetof(struct pllctl_regs, reg)
-	div_offset(div1), div_offset(div2), div_offset(div3),
-	div_offset(div4), div_offset(div5), div_offset(div6),
-	div_offset(div7), div_offset(div8),
-};
-
-static unsigned long pll_bypass_mask[] = { 1, 4, 2 };
-static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff };
-
-/* Mappings from PLL+DIV to subsystem clocks */
-#define sys_arm1176_clk		{SYS_PLL, 0}
-#define sys_dsp_clk		{SYS_PLL, 1}
-#define sys_ddr_clk		{SYS_PLL, 2}
-#define sys_full_clk		{SYS_PLL, 3}
-#define sys_lcd_clk		{SYS_PLL, 4}
-#define sys_vlynq_ref_clk	{SYS_PLL, 5}
-#define sys_tsc_clk		{SYS_PLL, 6}
-#define sys_half_clk		{SYS_PLL, 7}
-
-#define eth_clk_5		{ETH_PLL, 0}
-#define eth_clk_50		{ETH_PLL, 1}
-#define eth_clk_125		{ETH_PLL, 2}
-#define eth_clk_250		{ETH_PLL, 3}
-#define eth_clk_25		{ETH_PLL, 4}
-
-#define tdm_clk			{TDM_PLL, 0}
-#define tdm_extra_clk		{TDM_PLL, 1}
-#define tdm1_clk		{TDM_PLL, 2}
-
-/* Optimization barrier */
-#define barrier()	\
-	__asm__ __volatile__("mov r0, r0\n" : : : "memory");
-
-static const struct lpsc_map lpsc_clk_map[] = {
-	[TNETV107X_LPSC_ARM]			= sys_arm1176_clk,
-	[TNETV107X_LPSC_GEM]			= sys_dsp_clk,
-	[TNETV107X_LPSC_DDR2_PHY]		= sys_ddr_clk,
-	[TNETV107X_LPSC_TPCC]			= sys_full_clk,
-	[TNETV107X_LPSC_TPTC0]			= sys_full_clk,
-	[TNETV107X_LPSC_TPTC1]			= sys_full_clk,
-	[TNETV107X_LPSC_RAM]			= sys_full_clk,
-	[TNETV107X_LPSC_MBX_LITE]		= sys_arm1176_clk,
-	[TNETV107X_LPSC_LCD]			= sys_lcd_clk,
-	[TNETV107X_LPSC_ETHSS]			= eth_clk_125,
-	[TNETV107X_LPSC_AEMIF]			= sys_full_clk,
-	[TNETV107X_LPSC_CHIP_CFG]		= sys_half_clk,
-	[TNETV107X_LPSC_TSC]			= sys_tsc_clk,
-	[TNETV107X_LPSC_ROM]			= sys_half_clk,
-	[TNETV107X_LPSC_UART2]			= sys_half_clk,
-	[TNETV107X_LPSC_PKTSEC]			= sys_half_clk,
-	[TNETV107X_LPSC_SECCTL]			= sys_half_clk,
-	[TNETV107X_LPSC_KEYMGR]			= sys_half_clk,
-	[TNETV107X_LPSC_KEYPAD]			= sys_half_clk,
-	[TNETV107X_LPSC_GPIO]			= sys_half_clk,
-	[TNETV107X_LPSC_MDIO]			= sys_half_clk,
-	[TNETV107X_LPSC_SDIO0]			= sys_half_clk,
-	[TNETV107X_LPSC_UART0]			= sys_half_clk,
-	[TNETV107X_LPSC_UART1]			= sys_half_clk,
-	[TNETV107X_LPSC_TIMER0]			= sys_half_clk,
-	[TNETV107X_LPSC_TIMER1]			= sys_half_clk,
-	[TNETV107X_LPSC_WDT_ARM]		= sys_half_clk,
-	[TNETV107X_LPSC_WDT_DSP]		= sys_half_clk,
-	[TNETV107X_LPSC_SSP]			= sys_half_clk,
-	[TNETV107X_LPSC_TDM0]			= tdm_clk,
-	[TNETV107X_LPSC_VLYNQ]			= sys_vlynq_ref_clk,
-	[TNETV107X_LPSC_MCDMA]			= sys_half_clk,
-	[TNETV107X_LPSC_USB0]			= sys_half_clk,
-	[TNETV107X_LPSC_TDM1]			= tdm1_clk,
-	[TNETV107X_LPSC_DEBUGSS]		= sys_half_clk,
-	[TNETV107X_LPSC_ETHSS_RGMII]		= eth_clk_250,
-	[TNETV107X_LPSC_SYSTEM]			= sys_half_clk,
-	[TNETV107X_LPSC_IMCOP]			= sys_dsp_clk,
-	[TNETV107X_LPSC_SPARE]			= sys_half_clk,
-	[TNETV107X_LPSC_SDIO1]			= sys_half_clk,
-	[TNETV107X_LPSC_USB1]			= sys_half_clk,
-	[TNETV107X_LPSC_USBSS]			= sys_half_clk,
-	[TNETV107X_LPSC_DDR2_EMIF1_VRST]	= sys_ddr_clk,
-	[TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST]	= sys_ddr_clk,
-};
-
-static const unsigned long pll_ext_freq[] = {
-	[SYS_PLL] = CONFIG_PLL_SYS_EXT_FREQ,
-	[ETH_PLL] = CONFIG_PLL_ETH_EXT_FREQ,
-	[TDM_PLL] = CONFIG_PLL_TDM_EXT_FREQ,
-};
-
-static unsigned long pll_freq_get(int pll)
-{
-	unsigned long mult = 1, prediv = 1, postdiv = 1;
-	unsigned long ref = CONFIG_SYS_INT_OSC_FREQ;
-	unsigned long ret;
-	u32 bypass;
-
-	bypass = __raw_readl((u32 *)(CLOCK_BASE));
-	if (!(bypass & pll_bypass_mask[pll])) {
-		mult	= sspll_reg_read(pll, mult_factor);
-		prediv	= sspll_reg_read(pll, prediv) + 1;
-		postdiv	= sspll_reg_read(pll, postdiv) + 1;
-	}
-
-	if (pllctl_reg_read(pll, ctl) & PLLCTL_CLKMODE)
-		ref = pll_ext_freq[pll];
-
-	if (!(pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN))
-		return ref;
-
-	ret = (unsigned long)(ref + ((unsigned long long)ref * mult) / 256);
-	ret /= (prediv * postdiv);
-
-	return ret;
-}
-
-static unsigned long __pll_div_freq_get(int pll, unsigned int fpll,
-					int div)
-{
-	int divider = 1;
-	unsigned long divreg;
-
-	divreg = __raw_readl((void *)pllctl_regs[pll] + pll_div_offset[div]);
-
-	if (divreg & PLLDIV_ENABLE)
-		divider = (divreg & pll_div_mask[pll]) + 1;
-
-	return fpll / divider;
-}
-
-static unsigned long pll_div_freq_get(int pll, int div)
-{
-	unsigned int fpll = pll_freq_get(pll);
-
-	return __pll_div_freq_get(pll, fpll, div);
-}
-
-static void __pll_div_freq_set(int pll, unsigned int fpll, int div,
-			       unsigned long hz)
-{
-	int divider = (fpll / hz - 1);
-
-	divider &= pll_div_mask[pll];
-	divider |= PLLDIV_ENABLE;
-
-	__raw_writel(divider, (void *)pllctl_regs[pll] + pll_div_offset[div]);
-	pllctl_reg_setbits(pll, alnctl, (1 << div));
-	pllctl_reg_setbits(pll, dchange, (1 << div));
-}
-
-static unsigned long pll_div_freq_set(int pll, int div, unsigned long hz)
-{
-	unsigned int fpll = pll_freq_get(pll);
-
-	__pll_div_freq_set(pll, fpll, div, hz);
-
-	pllctl_reg_write(pll, cmd, 1);
-
-	/* Wait until new divider takes effect */
-	while (pllctl_reg_read(pll, stat) & 0x01);
-
-	return __pll_div_freq_get(pll, fpll, div);
-}
-
-unsigned long clk_get_rate(unsigned int clk)
-{
-	return pll_div_freq_get(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div);
-}
-
-unsigned long clk_round_rate(unsigned int clk, unsigned long hz)
-{
-	unsigned long fpll, divider, pll;
-
-	pll = lpsc_clk_map[clk].pll;
-	fpll = pll_freq_get(pll);
-	divider = (fpll / hz - 1);
-	divider &= pll_div_mask[pll];
-
-	return fpll / (divider + 1);
-}
-
-int clk_set_rate(unsigned int clk, unsigned long _hz)
-{
-	unsigned long hz;
-
-	hz = clk_round_rate(clk, _hz);
-	if (hz != _hz)
-		return -EINVAL;	/* Cannot set to target freq */
-
-	pll_div_freq_set(lpsc_clk_map[clk].pll, lpsc_clk_map[clk].div, hz);
-	return 0;
-}
-
-void lpsc_control(int mod, unsigned long state, int lrstz)
-{
-	u32 mdctl;
-
-	mdctl = psc_reg_read(PSC_MDCTL(mod));
-	mdctl &= ~0x1f;
-	mdctl |= state;
-
-	if (lrstz == 0)
-		mdctl &= ~PSC_MDCTL_LRSTZ;
-	else if (lrstz == 1)
-		mdctl |= PSC_MDCTL_LRSTZ;
-
-	psc_reg_write(PSC_MDCTL(mod), mdctl);
-
-	psc_reg_write(PSC_PTCMD, 1);
-
-	/* wait for power domain transition to end */
-	while (psc_reg_read(PSC_PTSTAT) & 1);
-
-	/* Wait for module state change */
-	while ((psc_reg_read(PSC_MDSTAT(mod)) & 0x1f) != state);
-}
-
-int lpsc_status(unsigned int id)
-{
-	return psc_reg_read(PSC_MDSTAT(id)) & 0x1f;
-}
-
-static void init_pll(const struct pll_init_data *data)
-{
-	unsigned long fpll;
-	unsigned long best_pre = 0, best_post = 0, best_mult = 0;
-	unsigned long div, prediv, postdiv, mult;
-	unsigned long delta, actual;
-	long best_delta = -1;
-	int i;
-	u32 tmp;
-
-	if (data->pll == SYS_PLL)
-		return; /* cannot reconfigure system pll on the fly */
-
-	tmp = pllctl_reg_read(data->pll, ctl);
-	if (data->internal_osc) {
-		tmp &= ~PLLCTL_CLKMODE;
-		fpll = CONFIG_SYS_INT_OSC_FREQ;
-	} else {
-		tmp |= PLLCTL_CLKMODE;
-		fpll = pll_ext_freq[data->pll];
-	}
-	pllctl_reg_write(data->pll, ctl, tmp);
-
-	mult = data->pll_freq / fpll;
-	for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) {
-		div = (fpll * mult) / data->pll_freq;
-		if (div < 1 || div > MAX_DIV)
-			continue;
-
-		for (postdiv = 1; postdiv <= min(div, MAX_POSTDIV); postdiv++) {
-			prediv = div / postdiv;
-			if (prediv < 1 || prediv > MAX_PREDIV)
-				continue;
-
-			actual = (fpll / prediv) * (mult / postdiv);
-			delta = (actual - data->pll_freq);
-			if (delta < 0)
-				delta = -delta;
-			if ((delta < best_delta) || (best_delta == -1)) {
-				best_delta = delta;
-				best_mult = mult;
-				best_pre = prediv;
-				best_post = postdiv;
-				if (delta == 0)
-					goto done;
-			}
-		}
-	}
-done:
-
-	if (best_delta == -1) {
-		printf("pll cannot derive %lu from %lu\n",
-				data->pll_freq, fpll);
-		return;
-	}
-
-	fpll = fpll * best_mult;
-	fpll /= best_pre * best_post;
-
-	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC);
-	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLEN);
-
-	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST);
-
-	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN);
-	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLDIS);
-
-	sspll_reg_write(data->pll, mult_factor,	(best_mult - 1) << 8);
-	sspll_reg_write(data->pll, prediv,	best_pre - 1);
-	sspll_reg_write(data->pll, postdiv,	best_post - 1);
-
-	for (i = 0; i < 10; i++)
-		if (data->div_freq[i])
-			__pll_div_freq_set(data->pll, fpll, i,
-					   data->div_freq[i]);
-
-	pllctl_reg_write(data->pll, cmd, 1);
-
-	/* Wait until pll "go" operation completes */
-	while (pllctl_reg_read(data->pll, stat) & 0x01);
-
-	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST);
-	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN);
-}
-
-void init_plls(int num_pll, struct pll_init_data *config)
-{
-	int i;
-
-	for (i = 0; i < num_pll; i++)
-		init_pll(&config[i]);
-}
--- a/arch/arm/cpu/arm1176/tnetv107x/init.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/init.c
@@ -1,37 +0,0 @@
-/*
- * TNETV107X: Architecture initialization
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-void chip_configuration_unlock(void)
-{
-       __raw_writel(TNETV107X_KICK0_MAGIC, TNETV107X_KICK0);
-       __raw_writel(TNETV107X_KICK1_MAGIC, TNETV107X_KICK1);
-}
-
-int arch_cpu_init(void)
-{
-       icache_enable();
-       chip_configuration_unlock();
-
-       return 0;
-}
--- a/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S
+++ b/arch/arm/cpu/arm1176/tnetv107x/lowlevel_init.S
@@ -1,25 +0,0 @@
-/*
- * TNETV107X: Low-level pre-relocation initialization
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-.globl lowlevel_init
-lowlevel_init:
-	/* nothing for now, maybe needed for more exotic boot modes */
-	mov	pc, lr
--- a/arch/arm/cpu/arm1176/tnetv107x/mux.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/mux.c
@@ -1,334 +0,0 @@
-/*
- * TNETV107X: Pinmux configuration
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/mux.h>
-
-#define MUX_MODE_1		0x00
-#define MUX_MODE_2		0x04
-#define MUX_MODE_3		0x0c
-#define MUX_MODE_4		0x1c
-
-#define MUX_DEBUG		0
-
-static const struct pin_config pin_table[] = {
-	/*		  reg	shift	mode	*/
-	TNETV107X_MUX_CFG(0,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(0,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(0,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(0,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(0,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(0,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(0,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(0,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(0,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(0,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(0,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(0,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(1,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(1,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(1,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(1,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(1,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(1,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(1,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(1,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(1,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(1,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(1,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(1,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(2,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(2,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(2,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(2,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(2,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(2,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(2,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(2,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(2,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(2,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(2,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(2,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(3,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	0,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(3,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(3,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	5,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(3,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(3,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	10,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(3,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(3,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	15,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(3,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(3,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	20,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(3,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(3,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(3,	25,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(4,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(4,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(4,	0,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(4,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(4,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(4,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(4,	15,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(4,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(4,	20,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(4,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(4,	25,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(5,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(5,	0,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(5,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(5,	5,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(5,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(5,	10,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(5,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(5,	15,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(5,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(5,	20,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(5,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(5,	25,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(6,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(6,	0,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(6,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(6,	5,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(6,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(6,	10,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(6,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(6,	15,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(6,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(6,	20,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(6,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(6,	25,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(7,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(7,	0,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(7,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(7,	5,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(7,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(7,	10,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(7,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(7,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(7,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(7,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(7,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(7,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(8,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(8,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(8,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(8,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(8,	5,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(8,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(8,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(9,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(9,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(9,	0,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(9,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(9,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(9,	5,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(9,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(9,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(9,	10,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(9,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(9,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(9,	15,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(9,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(9,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(9,	20,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(10,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(10,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(10,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(10,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(10,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(10,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(10,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(10,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(10,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(10,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(10,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(10,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(11,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(11,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(12,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(12,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(12,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(12,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(12,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(12,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(13,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(13,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(13,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(13,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(14,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(14,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(14,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(14,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(14,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(14,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(15,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(15,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(15,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(15,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(15,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(15,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(15,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(15,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(16,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(16,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(16,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(16,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(16,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(16,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(16,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(17,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(17,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(17,	0,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(17,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(17,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(17,	5,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(17,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(17,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(17,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(17,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(17,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(17,	15,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(18,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(18,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(18,	0,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(18,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(18,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(18,	5,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(18,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(18,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(18,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(18,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(18,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(18,	15,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(19,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(19,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(19,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(19,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(19,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(19,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(20,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(20,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(20,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(20,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(20,	15,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(20,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(20,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(21,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(21,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(21,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(21,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(21,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(21,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	5,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(22,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(22,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(22,	15,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(22,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	20,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(22,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(22,	25,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(23,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(23,	0,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(23,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(23,	5,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(23,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(23,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(24,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(24,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(24,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(24,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(24,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(24,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(24,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(24,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(24,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(24,	15,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(24,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(24,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(24,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(24,	25,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(25,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(25,	0,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(25,	0,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(25,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(25,	5,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(25,	5,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(25,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(25,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(25,	10,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(25,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(25,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(25,	15,	MUX_MODE_3),
-	TNETV107X_MUX_CFG(25,	15,	MUX_MODE_4),
-	TNETV107X_MUX_CFG(26,	0,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(26,	5,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(26,	10,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(26,	10,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(26,	15,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(26,	15,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(26,	20,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(26,	20,	MUX_MODE_2),
-	TNETV107X_MUX_CFG(26,	25,	MUX_MODE_1),
-	TNETV107X_MUX_CFG(26,	25,	MUX_MODE_2),
-};
-
-const int pin_table_size = sizeof(pin_table) / sizeof(pin_table[0]);
-
-int mux_select_pin(short index)
-{
-	const struct pin_config *cfg;
-	unsigned long mask, mode, reg;
-
-	if (index >= pin_table_size)
-		return 0;
-
-	cfg = &pin_table[index];
-
-	mask = 0x1f << cfg->mask_offset;
-	mode = cfg->mode << cfg->mask_offset;
-
-	reg = __raw_readl(TNETV107X_PINMUX(cfg->reg_index));
-	reg = (reg & ~mask) | mode;
-	__raw_writel(reg, TNETV107X_PINMUX(cfg->reg_index));
-
-	return 1;
-}
-
-int mux_select_pins(const short *pins)
-{
-	int i, ret = 1;
-
-	for (i = 0; pins[i] >= 0; i++)
-		ret &= mux_select_pin(pins[i]);
-
-	return ret;
-}
--- a/arch/arm/cpu/arm1176/tnetv107x/timer.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/timer.c
@@ -1,122 +0,0 @@
-/*
- * TNETV107X: Timer implementation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-
-struct timer_regs {
-	u_int32_t pid12;
-	u_int32_t pad[3];
-	u_int32_t tim12;
-	u_int32_t tim34;
-	u_int32_t prd12;
-	u_int32_t prd34;
-	u_int32_t tcr;
-	u_int32_t tgcr;
-	u_int32_t wdtcr;
-};
-
-#define regs ((struct timer_regs *)CONFIG_SYS_TIMERBASE)
-
-#define TIMER_LOAD_VAL	(CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
-#define TIM_CLK_DIV	16
-
-static ulong timestamp;
-static ulong lastinc;
-
-int timer_init(void)
-{
-	clk_enable(TNETV107X_LPSC_TIMER0);
-
-	lastinc = timestamp = 0;
-
-	/* We are using timer34 in unchained 32-bit mode, full speed */
-	__raw_writel(0x0, &regs->tcr);
-	__raw_writel(0x0, &regs->tgcr);
-	__raw_writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &regs->tgcr);
-	__raw_writel(0x0, &regs->tim34);
-	__raw_writel(TIMER_LOAD_VAL, &regs->prd34);
-	__raw_writel(2 << 22, &regs->tcr);
-
-	return 0;
-}
-
-void reset_timer(void)
-{
-	lastinc = timestamp = 0;
-
-	__raw_writel(0,		&regs->tcr);
-	__raw_writel(0,		&regs->tim34);
-	__raw_writel(2 << 22,	&regs->tcr);
-}
-
-static ulong get_timer_raw(void)
-{
-	ulong now = __raw_readl(&regs->tim34);
-
-	if (now >= lastinc)
-		timestamp += now - lastinc;
-	else
-		timestamp += now + TIMER_LOAD_VAL - lastinc;
-
-	lastinc = now;
-
-	return timestamp;
-}
-
-ulong get_timer(ulong base)
-{
-	return (get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-void __udelay(unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
-	tmo *= usec;
-	tmo /= (1000 * TIM_CLK_DIV);
-
-	endtime = get_timer_raw() + tmo;
-
-	do {
-		ulong now = get_timer_raw();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
--- a/arch/arm/cpu/arm1176/tnetv107x/wdt.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/wdt.c
@@ -1,180 +0,0 @@
-/*
- * TNETV107X: Watchdog timer implementation (for reset)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-
-#define MAX_DIV		0xFFFE0001
-
-struct wdt_regs {
-	u32 kick_lock;
-#define KICK_LOCK_1	0x5555
-#define KICK_LOCK_2	0xaaaa
-	u32 kick;
-
-	u32 change_lock;
-#define CHANGE_LOCK_1	0x6666
-#define CHANGE_LOCK_2	0xbbbb
-	u32 change;
-
-	u32 disable_lock;
-#define DISABLE_LOCK_1	0x7777
-#define DISABLE_LOCK_2	0xcccc
-#define DISABLE_LOCK_3	0xdddd
-	u32 disable;
-
-	u32 prescale_lock;
-#define PRESCALE_LOCK_1	0x5a5a
-#define PRESCALE_LOCK_2	0xa5a5
-	u32 prescale;
-};
-
-static struct wdt_regs* regs = (struct wdt_regs *)TNETV107X_WDT0_ARM_BASE;
-
-#define wdt_reg_read(reg)	__raw_readl(&regs->reg)
-#define wdt_reg_write(reg, val)	__raw_writel((val), &regs->reg)
-
-static int write_prescale_reg(unsigned long prescale_value)
-{
-	wdt_reg_write(prescale_lock, PRESCALE_LOCK_1);
-	if ((wdt_reg_read(prescale_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(prescale_lock, PRESCALE_LOCK_2);
-	if ((wdt_reg_read(prescale_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(prescale, prescale_value);
-
-	return 0;
-}
-
-static int write_change_reg(unsigned long initial_timer_value)
-{
-	wdt_reg_write(change_lock, CHANGE_LOCK_1);
-	if ((wdt_reg_read(change_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(change_lock, CHANGE_LOCK_2);
-	if ((wdt_reg_read(change_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(change, initial_timer_value);
-
-	return 0;
-}
-
-static int wdt_control(unsigned long disable_value)
-{
-	wdt_reg_write(disable_lock, DISABLE_LOCK_1);
-	if ((wdt_reg_read(disable_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(disable_lock, DISABLE_LOCK_2);
-	if ((wdt_reg_read(disable_lock) & 0x3) != 0x2)
-		return -1;
-
-	wdt_reg_write(disable_lock, DISABLE_LOCK_3);
-	if ((wdt_reg_read(disable_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(disable, disable_value);
-	return 0;
-}
-
-static int wdt_set_period(unsigned long msec)
-{
-	unsigned long change_value, count_value;
-	unsigned long prescale_value = 1;
-	unsigned long refclk_khz, maxdiv;
-	int ret;
-
-	refclk_khz = clk_get_rate(TNETV107X_LPSC_WDT_ARM);
-	maxdiv = (MAX_DIV / refclk_khz);
-
-	if ((!msec) || (msec > maxdiv))
-		return -1;
-
-	count_value = refclk_khz * msec;
-	if (count_value > 0xffff) {
-		change_value = count_value / 0xffff + 1;
-		prescale_value = count_value / change_value;
-	} else {
-		change_value = count_value;
-	}
-
-	ret = write_prescale_reg(prescale_value - 1);
-	if (ret)
-		return ret;
-
-	ret = write_change_reg(change_value);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-unsigned long last_wdt = -1;
-
-int wdt_start(unsigned long msecs)
-{
-	int ret;
-	ret = wdt_control(0);
-	if (ret)
-		return ret;
-	ret = wdt_set_period(msecs);
-	if (ret)
-		return ret;
-	ret = wdt_control(1);
-	if (ret)
-		return ret;
-	ret = wdt_kick();
-	last_wdt = msecs;
-	return ret;
-}
-
-int wdt_stop(void)
-{
-	last_wdt = -1;
-	return wdt_control(0);
-}
-
-int wdt_kick(void)
-{
-	wdt_reg_write(kick_lock, KICK_LOCK_1);
-	if ((wdt_reg_read(kick_lock) & 0x3) != 0x1)
-		return -1;
-
-	wdt_reg_write(kick_lock, KICK_LOCK_2);
-	if ((wdt_reg_read(kick_lock) & 0x3) != 0x3)
-		return -1;
-
-	wdt_reg_write(kick, 1);
-	return 0;
-}
-
-void reset_cpu(ulong addr)
-{
-	clk_enable(TNETV107X_LPSC_WDT_ARM);
-	wdt_start(1);
-	wdt_kick();
-}
--- a/arch/arm/cpu/arm1176/u-boot.lds
+++ b/arch/arm/cpu/arm1176/u-boot.lds
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		arch/arm/cpu/arm1176/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	}
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end__ = .;
-	}
-
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
--- a/arch/arm/cpu/arm720t/Makefile
+++ b/arch/arm/cpu/arm720t/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-COBJS	= interrupts.o cpu.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm720t/interrupts.c
+++ b/arch/arm/cpu/arm720t/interrupts.c
@@ -1,316 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <clps7111.h>
-#include <asm/proc-armv/ptrace.h>
-#include <asm/hardware.h>
-
-#ifndef CONFIG_NETARM
-/* we always count down the max. */
-#define TIMER_LOAD_VAL 0xffff
-/* macro to read the 16 bit timer */
-#define READ_TIMER (IO_TC1D & 0xffff)
-
-#ifdef CONFIG_LPC2292
-#undef READ_TIMER
-#define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
-#endif
-
-#else
-#define IRQEN	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
-#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
-#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
-#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
-#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
-#endif
-
-#ifdef CONFIG_S3C4510B
-/* require interrupts for the S3C4510B */
-# ifndef CONFIG_USE_IRQ
-#  error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
-# else
-static struct _irq_handler IRQ_HANDLER[N_IRQS];
-# endif
-#endif	/* CONFIG_S3C4510B */
-
-#ifdef CONFIG_USE_IRQ
-void do_irq (struct pt_regs *pt_regs)
-{
-#if defined(CONFIG_S3C4510B)
-	unsigned int pending;
-
-	while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) {  /* sentinal value for no pending interrutps */
-		IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
-
-		/* clear pending interrupt */
-		PUT_REG( REG_INTPEND, (1<<(pending>>2)));
-	}
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No do_irq() for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-
-    void (*pfnct)(void);
-
-    pfnct = (void (*)(void))VICVectAddr;
-
-    (*pfnct)();
-#else
-#error do_irq() not defined for this CPU type
-#endif
-}
-#endif
-
-#ifdef CONFIG_S3C4510B
-static void default_isr( void *data) {
-	printf ("default_isr():  called for IRQ %d\n", (int)data);
-}
-
-static void timer_isr( void *data) {
-	unsigned int *pTime = (unsigned int *)data;
-
-	(*pTime)++;
-	if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
-		/* toggle LED 0 */
-		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
-	}
-
-}
-#endif
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* Use IntegratorAP routines in board/integratorap.c */
-#else
-
-static ulong timestamp;
-static ulong lastdec;
-
-#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
-int arch_interrupt_init (void)
-{
-	int i;
-
-	/* install default interrupt handlers */
-	for ( i = 0; i < N_IRQS; i++) {
-		IRQ_HANDLER[i].m_data = (void *)i;
-		IRQ_HANDLER[i].m_func = default_isr;
-	}
-
-	/* configure interrupts for IRQ mode */
-	PUT_REG( REG_INTMODE, 0x0);
-	/* clear any pending interrupts */
-	PUT_REG( REG_INTPEND, 0x1FFFFF);
-
-	lastdec = 0;
-
-	/* install interrupt handler for timer */
-	IRQ_HANDLER[INT_TIMER0].m_data = (void *)&timestamp;
-	IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
-
-	return 0;
-}
-#endif
-
-int timer_init (void)
-{
-#if defined(CONFIG_NETARM)
-	/* disable all interrupts */
-	IRQEN = 0;
-
-	/* operate timer 2 in non-prescale mode */
-	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
-		    NETARM_GEN_TCTL_ENABLE |
-		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
-
-	/* set timer 2 counter */
-	lastdec = TIMER_LOAD_VAL;
-#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
-	/* disable all interrupts */
-	IO_INTMR1 = 0;
-
-	/* operate timer 1 in prescale mode */
-	IO_SYSCON1 |= SYSCON1_TC1M;
-
-	/* select 2kHz clock source for timer 1 */
-	IO_SYSCON1 &= ~SYSCON1_TC1S;
-
-	/* set timer 1 counter */
-	lastdec = IO_TC1D = TIMER_LOAD_VAL;
-#elif defined(CONFIG_S3C4510B)
-	/* configure free running timer 0 */
-	PUT_REG( REG_TMOD, 0x0);
-	/* Stop timer 0 */
-	CLR_REG( REG_TMOD, TM0_RUN);
-
-	/* Configure for interval mode */
-	CLR_REG( REG_TMOD, TM1_TOGGLE);
-
-	/*
-	 * Load Timer data register with count down value.
-	 * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
-	 */
-	PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
-
-	/*
-	 * Enable global interrupt
-	 * Enable timer0 interrupt
-	 */
-	CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
-
-	/* Start timer */
-	SET_REG( REG_TMOD, TM0_RUN);
-#elif defined(CONFIG_LPC2292)
-	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
-	PUT32(T0TCR, 0);	/* disable timer0 */
-	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
-	PUT32(T0MCR, 0);
-	PUT32(T0TC, 0);
-	PUT32(T0TCR, 1);	/* enable timer0 */
-
-#else
-#error No timer_init() defined for this CPU type
-#endif
-	timestamp = 0;
-
-	return (0);
-}
-
-#endif /* ! IntegratorAP */
-
-/*
- * timer without interrupts
- */
-
-
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) || defined(CONFIG_LPC2292)
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay (unsigned long usec)
-{
-	ulong tmo;
-
-	tmo = usec / 1000;
-	tmo *= CONFIG_SYS_HZ;
-	tmo /= 1000;
-
-	tmo += get_timer (0);
-
-	while (get_timer_masked () < tmo)
-#ifdef CONFIG_LPC2292
-		/* GJ - not sure whether this is really needed or a misunderstanding */
-		__asm__ __volatile__(" nop");
-#else
-		/*NOP*/;
-#endif
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec = READ_TIMER;
-	timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	} else {
-		tmo = usec * CONFIG_SYS_HZ;
-		tmo /= (1000*1000);
-	}
-
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-#elif defined(CONFIG_S3C4510B)
-
-ulong get_timer (ulong base)
-{
-	return timestamp - base;
-}
-
-void __udelay (unsigned long usec)
-{
-	u32 ticks;
-
-	ticks = (usec * CONFIG_SYS_HZ) / 1000000;
-
-	ticks += get_timer (0);
-
-	while (get_timer (0) < ticks)
-		/*NOP*/;
-
-}
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No timer routines for IntegratorAP/CM720T as yet */
-#else
-#error Timer routines not defined for this CPU type
-#endif
--- a/arch/arm/cpu/arm720t/lpc2292/Makefile
+++ b/arch/arm/cpu/arm720t/lpc2292/Makefile
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	= flash.o mmc.o mmc_hw.o spi.o
-SOBJS	= $(obj)iap_entry.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-# this MUST be compiled as thumb code!
-$(SOBJS):
-	$(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm720t/s3c4510b/Makefile
+++ b/arch/arm/cpu/arm720t/s3c4510b/Makefile
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS-y	+= cache.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -1,681 +0,0 @@
-/*
- *  armboot - Startup Code for ARM720 CPU-core
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-#include <asm/hardware.h>
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b	reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-#ifdef CONFIG_LPC2292
-	.word	0xB4405F76 /* 2's complement of the checksum of the vectors */
-#else
-	ldr	pc, _not_used
-#endif
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from RAM!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifdef CONFIG_LPC2292
-	bl	lowlevel_init
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_PRELOADER
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
-	bl coloured_LED_init
-	bl red_LED_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
-
-/* Interupt-Controller base addresses */
-INTMR1:		.word	0x80000280 @ 32 bit size
-INTMR2:		.word	0x80001280 @ 16 bit size
-INTMR3:		.word	0x80002280 @  8 bit size
-
-/* SYSCONs */
-SYSCON1:	.word	0x80000100
-SYSCON2:	.word	0x80001100
-SYSCON3:	.word	0x80002200
-
-#define CLKCTL	       0x6  /* mask */
-#define CLKCTL_18      0x0  /* 18.432 MHz */
-#define CLKCTL_36      0x2  /* 36.864 MHz */
-#define CLKCTL_49      0x4  /* 49.152 MHz */
-#define CLKCTL_73      0x6  /* 73.728 MHz */
-
-#elif defined(CONFIG_LPC2292)
-PLLCFG_ADR:	.word	PLLCFG
-PLLFEED_ADR:	.word	PLLFEED
-PLLCON_ADR:	.word	PLLCON
-PLLSTAT_ADR:	.word	PLLSTAT
-VPBDIV_ADR:	.word	VPBDIV
-MEMMAP_ADR:	.word	MEMMAP
-
-#endif
-
-cpu_init_crit:
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
-
-	/*
-	 * mask all IRQs by clearing all bits in the INTMRs
-	 */
-	mov	r1, #0x00
-	ldr	r0, INTMR1
-	str	r1, [r0]
-	ldr	r0, INTMR2
-	str	r1, [r0]
-	ldr	r0, INTMR3
-	str	r1, [r0]
-
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15,0,r0,c1,c0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x0000008f	@ clear bits 7, 3:0 (B--- WCAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	mcr	p15,0,r0,c1,c0
-#elif defined(CONFIG_NETARM)
-	/*
-	 * prior to software reset : need to set pin PORTC4 to be *HRESET
-	 */
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-	ldr	r1, =(NETARM_GEN_PORT_MODE(0x10) | \
-			NETARM_GEN_PORT_DIR(0x10))
-	str	r1, [r0, #+NETARM_GEN_PORTC]
-	/*
-	 * software reset : see HW Ref. Guide 8.2.4 : Software Service register
-	 *		    for an explanation of this process
-	 */
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	/*
-	 * setup PLL and System Config
-	 */
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-
-	ldr	r1, =(	NETARM_GEN_SYS_CFG_LENDIAN | \
-			NETARM_GEN_SYS_CFG_BUSFULL | \
-			NETARM_GEN_SYS_CFG_USER_EN | \
-			NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
-			NETARM_GEN_SYS_CFG_BUSARB_INT | \
-			NETARM_GEN_SYS_CFG_BUSMON_EN )
-
-	str	r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
-
-#ifndef CONFIG_NETARM_PLL_BYPASS
-	ldr	r1, =(	NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
-			NETARM_GEN_PLL_CTL_POLTST_DEF | \
-			NETARM_GEN_PLL_CTL_INDIV(1) | \
-			NETARM_GEN_PLL_CTL_ICP_DEF | \
-			NETARM_GEN_PLL_CTL_OUTDIV(2) )
-	str	r1, [r0, #+NETARM_GEN_PLL_CONTROL]
-#endif
-
-	/*
-	 * mask all IRQs by clearing all bits in the INTMRs
-	 */
-	mov	r1, #0
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-	str	r1, [r0, #+NETARM_GEN_INTR_ENABLE]
-
-#elif defined(CONFIG_S3C4510B)
-
-	/*
-	 * Mask off all IRQ sources
-	 */
-	ldr	r1, =REG_INTMASK
-	ldr	r0, =0x3FFFFF
-	str	r0, [r1]
-
-	/*
-	 * Disable Cache
-	 */
-	ldr r0, =REG_SYSCFG
-	ldr r1, =0x83ffffa0	/* cache-disabled  */
-	str r1, [r0]
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No specific initialisation for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-	/* Set-up PLL */
-	mov	r3, #0xAA
-	mov	r4, #0x55
-	/* First disconnect and disable the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x00
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Set new M and P values */
-	ldr	r0, PLLCFG_ADR
-	mov	r1, #0x23	/* M=4 and P=2 */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Then enable the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x01	/* PLL enable bit */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Wait for the lock */
-	ldr	r0, PLLSTAT_ADR
-	mov	r1, #0x400	/* lock bit */
-lock_loop:
-	ldr	r2, [r0]
-	and	r2, r1, r2
-	cmp	r2, #0
-	beq	lock_loop
-	/* And finally connect the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x03	/* PLL enable bit and connect bit */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Set-up VPBDIV register */
-	ldr	r0, VPBDIV_ADR
-	mov	r1, #0x01	/* VPB clock is same as process clock */
-	str	r1, [r0]
-#else
-#error No cpu_init_crit() defined for current CPU type
-#endif
-
-#ifdef CONFIG_ARM7_REVD
-	/* set clock speed */
-	/* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */
-	/* !!! not doing DRAM refresh properly! */
-	ldr	r0, SYSCON3
-	ldr	r1, [r0]
-	bic	r1, r1, #CLKCTL
-	orr	r1, r1, #CLKCTL_36
-	str	r1, [r0]
-#endif
-
-#ifndef CONFIG_LPC2292
-	mov	ip, lr
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependent, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	bl	lowlevel_init
-	mov	lr, ip
-#endif
-
-	mov	pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add	r8, sp, #S_PC
-
-	ldr	r2, IRQ_STACK_START_IN
-	ldmia	r2, {r2 - r4}			@ get pc, cpsr, old_r0
-	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r4}			@ save sp_SVC, lr_SVC, pc, cpsr, old_r
-	mov	r0, sp
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			@ Calling SP, LR
-	str	lr, [r8, #0]			@ Save calling PC
-	mrs	r6, spsr
-	str	r6, [r8, #4]			@ Save CPSR
-	str	r0, [r8, #8]			@ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str	lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	msr	spsr_c, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align	5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	mov	ip, #0
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate cache
-	mcr	p15, 0, ip, c8, c7, 0		@ flush TLB (v4)
-	mrc	p15, 0, ip, c1, c0, 0		@ get ctrl register
-	bic	ip, ip, #0x000f			@ ............wcam
-	bic	ip, ip, #0x2100			@ ..v....s........
-	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
-	mov	pc, r0
-#elif defined(CONFIG_NETARM)
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, =NETARM_MEM_MODULE_BASE
-	ldr	r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
-	ldr	r1, =0xFFFFF000
-	and	r0, r1, r0
-	ldr	r1, =(relocate-CONFIG_SYS_TEXT_BASE)
-	add	r0, r1, r0
-	ldr	r4, =NETARM_GEN_MODULE_BASE
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	mov	pc, r0
-#elif defined(CONFIG_S3C4510B)
-/* Nothing done here as reseting the CPU is board specific, depending
- * on external peripherals such as watchdog timers, etc. */
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No specific reset actions for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	mov	pc, r0
-#else
-#error No reset_cpu() defined for current CPU type
-#endif
--- a/arch/arm/cpu/arm720t/u-boot.lds
+++ b/arch/arm/cpu/arm720t/u-boot.lds
@@ -1,79 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		arch/arm/cpu/arm720t/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : {
-	}
-
-	. = ALIGN(4);
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end__ = .;
-	}
-
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-
-COBJS-y	+= cpu.o
-COBJS-$(CONFIG_USE_IRQ)	+= interrupts.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/a320/Makefile
+++ b/arch/arm/cpu/arm920t/a320/Makefile
@@ -1,46 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	+= reset.o
-COBJS	+= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/a320/reset.S
+++ b/arch/arm/cpu/arm920t/a320/reset.S
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-.global reset_cpu
-reset_cpu:
-	b	reset_cpu
--- a/arch/arm/cpu/arm920t/a320/timer.c
+++ b/arch/arm/cpu/arm920t/a320/timer.c
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <faraday/ftpmu010.h>
-#include <faraday/fttmr010.h>
-
-static ulong timestamp;
-static ulong lastdec;
-
-static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
-#define TIMER_CLOCK	32768
-#define TIMER_LOAD_VAL	0xffffffff
-
-int timer_init(void)
-{
-	unsigned int cr;
-
-	debug("%s()\n", __func__);
-
-	/* disable timers */
-	writel(0, &tmr->cr);
-
-	/* use 32768Hz oscillator for RTC, WDT, TIMER */
-	ftpmu010_32768osc_enable();
-
-	/* setup timer */
-	writel(TIMER_LOAD_VAL, &tmr->timer3_load);
-	writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
-	writel(0, &tmr->timer3_match1);
-	writel(0, &tmr->timer3_match2);
-
-	/* we don't want timer to issue interrupts */
-	writel(FTTMR010_TM3_MATCH1 |
-	       FTTMR010_TM3_MATCH2 |
-	       FTTMR010_TM3_OVERFLOW,
-	       &tmr->interrupt_mask);
-
-	cr = readl(&tmr->cr);
-	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
-	cr |= FTTMR010_TM3_ENABLE;
-	writel(cr, &tmr->cr);
-
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-/*
- * reset time
- */
-void reset_timer_masked(void)
-{
-	/* capure current decrementer value time */
-	lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-	timestamp = 0;		/* start "advancing" time stamp from 0 */
-
-	debug("%s(): lastdec = %lx\n", __func__, lastdec);
-}
-
-void reset_timer(void)
-{
-	debug("%s()\n", __func__);
-	reset_timer_masked();
-}
-
-/*
- * return timer ticks
- */
-ulong get_timer_masked(void)
-{
-	/* current tick value */
-	ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-
-	debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
-
-	if (lastdec >= now) {
-		/*
-		 * normal mode (non roll)
-		 * move stamp fordward with absoulte diff ticks
-		 */
-		timestamp += lastdec - now;
-	} else {
-		/*
-		 * we have overflow of the count down timer
-		 *
-		 * nts = ts + ld + (TLV - now)
-		 * ts=old stamp, ld=time that passed before passing through -1
-		 * (TLV-now) amount of time after passing though -1
-		 * nts = new "advancing time stamp"...it could also roll and
-		 * cause problems.
-		 */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
-	}
-
-	lastdec = now;
-
-	debug("%s() returns %lx\n", __func__, timestamp);
-
-	return timestamp;
-}
-
-/*
- * return difference between timer ticks and base
- */
-ulong get_timer(ulong base)
-{
-	debug("%s(%lx)\n", __func__, base);
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	debug("%s(%lx)\n", __func__, t);
-	timestamp = t;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay(unsigned long usec)
-{
-	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
-	unsigned long now, last = readl(&tmr->timer3_counter);
-
-	debug("%s(%lu)\n", __func__, usec);
-	while (tmo > 0) {
-		now = readl(&tmr->timer3_counter);
-		if (now > last) /* count down timer overflow */
-			tmo -= TIMER_LOAD_VAL + last - now;
-		else
-			tmo -= last - now;
-		last = now;
-	}
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	debug("%s()\n", __func__);
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	debug("%s()\n", __func__);
-	return CONFIG_SYS_HZ;
-}
--- a/arch/arm/cpu/arm920t/at91/Makefile
+++ b/arch/arm/cpu/arm920t/at91/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	+= lowlevel_init.o
-COBJS	+= reset.o
-COBJS	+= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/at91/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/at91/lowlevel_init.S
@@ -1,168 +0,0 @@
-/*
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_mc.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-
-#define ARM920T_CONTROL	0xC0000000	/* @ set bit 31 (iA) and 30 (nF) */
-
-_MTEXT_BASE:
-#undef START_FROM_MEM
-#ifdef START_FROM_MEM
-	.word	CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
-	ldr     r1, =AT91_ASM_PMC_MOR
-	/* Main oscillator Enable register */
-#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
-	ldr     r0, =0x0000FF01		/* Enable main oscillator */
-#else
-	ldr     r0, =0x0000FF00		/* Disable main oscillator */
-#endif
-	str     r0, [r1] /*AT91C_CKGR_MOR] */
-	/* Add loop to compensate Main Oscillator startup time */
-	ldr     r0, =0x00000010
-LoopOsc:
-	subs    r0, r0, #1
-	bhi     LoopOsc
-
-	/* memory control configuration */
-	/* this isn't very elegant, but	 what the heck */
-	ldr	r0, =SMRDATA
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	ldr	r2, =SMRDATAE
-	sub	r2, r2, r1
-pllloop:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	pllloop
-	/* delay - this is all done by guess */
-	ldr	r0, =0x00010000
-	/* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */
-lock:
-	subs	r0, r0, #1
-	bhi	lock
-	ldr	r0, =SMRDATA1
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	ldr	r2, =SMRDATA1E
-	sub	r2, r2, r1
-sdinit:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	sdinit
-
-	/* switch from FastBus to Asynchronous clock mode */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #ARM920T_CONTROL
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/* everything is fine now */
-	mov	pc, lr
-
-	.ltorg
-
-SMRDATA:
-	.word AT91_ASM_MC_EBI_CFG
-	.word CONFIG_SYS_EBI_CFGR_VAL
-	.word AT91_ASM_MC_SMC_CSR0
-	.word CONFIG_SYS_SMC_CSR0_VAL
-	.word AT91_ASM_PMC_PLLAR
-	.word CONFIG_SYS_PLLAR_VAL
-	.word AT91_ASM_PMC_PLLBR
-	.word CONFIG_SYS_PLLBR_VAL
-	.word AT91_ASM_PMC_MCKR
-	.word CONFIG_SYS_MCKR_VAL
-SMRDATAE:
-	/* here there's a delay */
-SMRDATA1:
-	.word AT91_ASM_PIOC_ASR
-	.word CONFIG_SYS_PIOC_ASR_VAL
-	.word AT91_ASM_PIOC_BSR
-	.word CONFIG_SYS_PIOC_BSR_VAL
-	.word AT91_ASM_PIOC_PDR
-	.word CONFIG_SYS_PIOC_PDR_VAL
-	.word AT91_ASM_MC_EBI_CSA
-	.word CONFIG_SYS_EBI_CSA_VAL
-	.word AT91_ASM_MC_SDRAMC_CR
-	.word CONFIG_SYS_SDRC_CR_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL1
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL2
-	.word CONFIG_SYS_SDRAM1
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_TR
-	.word CONFIG_SYS_SDRC_TR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL3
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-SMRDATA1E:
-	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
--- a/arch/arm/cpu/arm920t/at91/reset.c
+++ b/arch/arm/cpu/arm920t/at91/reset.c
@@ -1,61 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_st.h>
-
-void  __attribute__((weak)) board_reset(void)
-{
-	/* true empty function for defining weak symbol */
-}
-
-void reset_cpu(ulong ignored)
-{
-	at91_st_t *st = (at91_st_t *) ATMEL_BASE_ST;
-#if defined(CONFIG_AT91RM9200_USART)
-	/*shutdown the console to avoid strange chars during reset */
-	serial_exit();
-#endif
-
-	board_reset();
-
-	/* Reset the cpu by setting up the watchdog timer */
-	writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2),
-		&st->wdmr);
-	writel(AT91_ST_CR_WDRST, &st->cr);
-	/* and let it timeout */
-	while (1)
-		;
-	/* Never reached */
-}
--- a/arch/arm/cpu/arm920t/at91/timer.c
+++ b/arch/arm/cpu/arm920t/at91/timer.c
@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_tc.h>
-#include <asm/arch/at91_pmc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* the number of clocks per CONFIG_SYS_HZ */
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-
-int timer_init(void)
-{
-	at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	/* enables TC1.0 clock */
-	writel(1 << ATMEL_ID_TC0, &pmc->pcer);	/* enable clock */
-
-	writel(0, &tc->bcr);
-	writel(AT91_TC_BMR_TC0XC0S_NONE | AT91_TC_BMR_TC1XC1S_NONE |
-		AT91_TC_BMR_TC2XC2S_NONE , &tc->bmr);
-
-	writel(AT91_TC_CCR_CLKDIS, &tc->tc[0].ccr);
-	/* set to MCLK/2 and restart the timer
-	when the value in TC_RC is reached */
-	writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr);
-
-	writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interupts */
-	writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
-
-	writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
-	gd->lastinc = 0;
-	gd->tbl = 0;
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	gd->tbl = t;
-}
-
-void __udelay(unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC;
-	gd->lastinc = readl(&tc->tc[0].cv) & 0x0000ffff;
-	gd->tbl = 0;
-}
-
-ulong get_timer_raw(void)
-{
-	at91_tc_t *tc = (at91_tc_t *) ATMEL_BASE_TC;
-	u32 now;
-
-	now = readl(&tc->tc[0].cv) & 0x0000ffff;
-
-	if (now >= gd->lastinc) {
-		/* normal mode */
-		gd->tbl += now - gd->lastinc;
-	} else {
-		/* we have an overflow ... */
-		gd->tbl += now + TIMER_LOAD_VAL - gd->lastinc;
-	}
-	gd->lastinc = now;
-
-	return gd->tbl;
-}
-
-ulong get_timer_masked(void)
-{
-	return get_timer_raw()/TIMER_LOAD_VAL;
-}
-
-void udelay_masked(unsigned long usec)
-{
-	u32 tmo;
-	u32 endtime;
-	signed long diff;
-
-	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
-	tmo *= usec;
-	tmo /= 1000;
-
-	endtime = get_timer_raw() + tmo;
-
-	do {
-		u32 now = get_timer_raw();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
--- a/arch/arm/cpu/arm920t/at91rm9200/Makefile
+++ b/arch/arm/cpu/arm920t/at91rm9200/Makefile
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	+= lowlevel_init.o
-
-COBJS	+= bcm5221.o
-COBJS	+= dm9161.o
-COBJS	+= ether.o
-COBJS	+= i2c.o
-COBJS-$(CONFIG_KS8721_PHY)	+= ks8721.o
-COBJS	+= lxt972.o
-COBJS	+= reset.o
-COBJS	+= spi.o
-COBJS	+= timer.o
-COBJS	+= usb.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/at91rm9200/ether.c
+++ b/arch/arm/cpu/arm920t/at91rm9200/ether.c
@@ -1,316 +0,0 @@
-/*
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <miiphy.h>
-#include <asm/mach-types.h>
-
-/* ----- Ethernet Buffer definitions ----- */
-
-typedef struct {
-	unsigned long addr, size;
-} rbf_t;
-
-#define RBF_ADDR      0xfffffffc
-#define RBF_OWNER     (1<<0)
-#define RBF_WRAP      (1<<1)
-#define RBF_BROADCAST (1<<31)
-#define RBF_MULTICAST (1<<30)
-#define RBF_UNICAST   (1<<29)
-#define RBF_EXTERNAL  (1<<28)
-#define RBF_UNKNOWN   (1<<27)
-#define RBF_SIZE      0x07ff
-#define RBF_LOCAL4    (1<<26)
-#define RBF_LOCAL3    (1<<25)
-#define RBF_LOCAL2    (1<<24)
-#define RBF_LOCAL1    (1<<23)
-
-#define RBF_FRAMEMAX 64
-#define RBF_FRAMELEN 0x600
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/* alignment as per Errata #11 (64 bytes) is insufficient! */
-rbf_t rbfdt[RBF_FRAMEMAX] __attribute__((aligned(512)));
-rbf_t *rbfp;
-
-unsigned char rbf_framebuf[RBF_FRAMEMAX][RBF_FRAMELEN]
-	__attribute__((aligned(4)));
-
-/* structure to interface the PHY */
-AT91S_PhyOps PhyOps;
-
-AT91PS_EMAC p_mac;
-
-/*********** EMAC Phy layer Management functions *************************/
-/*
- * Name:
- *	at91rm9200_EmacEnableMDIO
- * Description:
- *	Enables the MDIO bit in MAC control register
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	none
- */
-void at91rm9200_EmacEnableMDIO (AT91PS_EMAC p_mac)
-{
-	/* Mac CTRL reg set for MDIO enable */
-	p_mac->EMAC_CTL |= AT91C_EMAC_MPE;	/* Management port enable */
-}
-
-/*
- * Name:
- *	at91rm9200_EmacDisableMDIO
- * Description:
- *	Disables the MDIO bit in MAC control register
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	none
- */
-void at91rm9200_EmacDisableMDIO (AT91PS_EMAC p_mac)
-{
-	/* Mac CTRL reg set for MDIO disable */
-	p_mac->EMAC_CTL &= ~AT91C_EMAC_MPE;	/* Management port disable */
-}
-
-
-/*
- * Name:
- *	at91rm9200_EmacReadPhy
- * Description:
- *	Reads data from the PHY register
- * Arguments:
- *	dev - pointer to struct net_device
- *	RegisterAddress - unsigned char
- *	pInput - pointer to value read from register
- * Return value:
- *	TRUE - if data read successfully
- */
-UCHAR at91rm9200_EmacReadPhy (AT91PS_EMAC p_mac,
-				     unsigned char RegisterAddress,
-				     unsigned short *pInput)
-{
-	p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
-			  (AT91C_EMAC_RW_R) |
-			  (RegisterAddress << 18) |
-			  (AT91C_EMAC_CODE_802_3);
-
-	udelay (10000);
-
-	*pInput = (unsigned short) p_mac->EMAC_MAN;
-
-	return TRUE;
-}
-
-
-/*
- * Name:
- *	at91rm9200_EmacWritePhy
- * Description:
- *	Writes data to the PHY register
- * Arguments:
- *	dev - pointer to struct net_device
- *	RegisterAddress - unsigned char
- *	pOutput - pointer to value to be written in the register
- * Return value:
- *	TRUE - if data read successfully
- */
-UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
-				      unsigned char RegisterAddress,
-				      unsigned short *pOutput)
-{
-	p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
-			AT91C_EMAC_CODE_802_3 | AT91C_EMAC_RW_W |
-			(RegisterAddress << 18) | *pOutput;
-
-	udelay (10000);
-
-	return TRUE;
-}
-
-int eth_init (bd_t * bd)
-{
-	int ret;
-	int i;
-	uchar enetaddr[6];
-
-	p_mac = AT91C_BASE_EMAC;
-
-	/* PIO Disable Register */
-	*AT91C_PIOA_PDR = AT91C_PA16_EMDIO | AT91C_PA15_EMDC | AT91C_PA14_ERXER |
-			  AT91C_PA13_ERX1 | AT91C_PA12_ERX0 | AT91C_PA11_ECRS_ECRSDV |
-			  AT91C_PA10_ETX1 | AT91C_PA9_ETX0 | AT91C_PA8_ETXEN |
-			  AT91C_PA7_ETXCK_EREFCK;
-
-#ifdef CONFIG_AT91C_USE_RMII
-	*AT91C_PIOB_PDR = AT91C_PB19_ERXCK;
-	*AT91C_PIOB_BSR = AT91C_PB19_ERXCK;
-#else
-	*AT91C_PIOB_PDR = AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV |
-			  AT91C_PB16_ERX3 | AT91C_PB15_ERX2 | AT91C_PB14_ETXER |
-			  AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-
-	/* Select B Register */
-	*AT91C_PIOB_BSR = AT91C_PB19_ERXCK | AT91C_PB18_ECOL |
-			  AT91C_PB17_ERXDV | AT91C_PB16_ERX3 | AT91C_PB15_ERX2 |
-			  AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-#endif
-
-	*AT91C_PMC_PCER = 1 << AT91C_ID_EMAC;	/* Peripheral Clock Enable Register */
-
-	p_mac->EMAC_CFG |= AT91C_EMAC_CSR;	/* Clear statistics */
-
-	/* Init Ethernet buffers */
-	for (i = 0; i < RBF_FRAMEMAX; i++) {
-		rbfdt[i].addr = (unsigned long)rbf_framebuf[i];
-		rbfdt[i].size = 0;
-	}
-	rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
-	rbfp = &rbfdt[0];
-
-	eth_getenv_enetaddr("ethaddr", enetaddr);
-
-	/* The CSB337 originally used a version of the MicroMonitor bootloader
-	 * which saved Ethernet addresses in the "wrong" order.  Operating
-	 * systems (like Linux) know this, and apply a workaround.  Replicate
-	 * that MicroMonitor behavior so we avoid needing to make such OS code
-	 * care about which bootloader was used.
-	 */
-	if (machine_is_csb337()) {
-		p_mac->EMAC_SA2H = (enetaddr[0] <<  8) | (enetaddr[1]);
-		p_mac->EMAC_SA2L = (enetaddr[2] << 24) | (enetaddr[3] << 16)
-				 | (enetaddr[4] <<  8) | (enetaddr[5]);
-	} else {
-		p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
-				 | (enetaddr[1] <<  8) | (enetaddr[0]);
-		p_mac->EMAC_SA2H = (enetaddr[5] <<  8) | (enetaddr[4]);
-	}
-
-	p_mac->EMAC_RBQP = (long) (&rbfdt[0]);
-	p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
-
-	p_mac->EMAC_CFG = (p_mac->EMAC_CFG | AT91C_EMAC_CAF | AT91C_EMAC_NBC)
-			& ~AT91C_EMAC_CLK;
-
-#ifdef CONFIG_AT91C_USE_RMII
-	p_mac->EMAC_CFG |= AT91C_EMAC_RMII;
-#endif
-
-#if (AT91C_MASTER_CLOCK > 40000000)
-	/* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
-	p_mac->EMAC_CFG |= AT91C_EMAC_CLK_HCLK_64;
-#endif
-
-	p_mac->EMAC_CTL |= AT91C_EMAC_TE | AT91C_EMAC_RE;
-
-	at91rm9200_GetPhyInterface (& PhyOps);
-
-	if (!PhyOps.IsPhyConnected (p_mac))
-		printf ("PHY not connected!!\n\r");
-
-	/* MII management start from here */
-	if (!(p_mac->EMAC_SR & AT91C_EMAC_LINK)) {
-		if (!(ret = PhyOps.Init (p_mac))) {
-			printf ("MAC: error during MII initialization\n");
-			return 0;
-		}
-	} else {
-		printf ("No link\n\r");
-		return 0;
-	}
-
-	return 0;
-}
-
-int eth_send (volatile void *packet, int length)
-{
-	while (!(p_mac->EMAC_TSR & AT91C_EMAC_BNQ));
-	p_mac->EMAC_TAR = (long) packet;
-	p_mac->EMAC_TCR = length;
-	while (p_mac->EMAC_TCR & 0x7ff);
-	p_mac->EMAC_TSR |= AT91C_EMAC_COMP;
-	return 0;
-}
-
-int eth_rx (void)
-{
-	int size;
-
-	if (!(rbfp->addr & RBF_OWNER))
-		return 0;
-
-	size = rbfp->size & RBF_SIZE;
-	NetReceive ((volatile uchar *) (rbfp->addr & RBF_ADDR), size);
-
-	rbfp->addr &= ~RBF_OWNER;
-	if (rbfp->addr & RBF_WRAP)
-		rbfp = &rbfdt[0];
-	else
-		rbfp++;
-
-	p_mac->EMAC_RSR |= AT91C_EMAC_REC;
-
-	return size;
-}
-
-void eth_halt (void)
-{
-};
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-int  at91rm9200_miiphy_read(const char *devname, unsigned char addr,
-		unsigned char reg, unsigned short * value)
-{
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacReadPhy (p_mac, reg, value);
-	at91rm9200_EmacDisableMDIO (p_mac);
-	return 0;
-}
-
-int  at91rm9200_miiphy_write(const char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
-{
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacWritePhy (p_mac, reg, &value);
-	at91rm9200_EmacDisableMDIO (p_mac);
-	return 0;
-}
-
-#endif
-
-int at91rm9200_miiphy_initialize(bd_t *bis)
-{
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-	miiphy_register("at91rm9200phy", at91rm9200_miiphy_read, at91rm9200_miiphy_write);
-#endif
-	return 0;
-}
-
-#endif
-
-#endif	/* CONFIG_DRIVER_ETHER */
--- a/arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/at91rm9200/lowlevel_init.S
@@ -1,169 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-/*
- * some parameters for the board
- *
- * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in
- * turn is based on the boot.bin code from ATMEL
- *
- */
-#include <asm/arch/AT91RM9200.h>
-
-_MTEXT_BASE:
-#undef START_FROM_MEM
-#ifdef START_FROM_MEM
-	.word	CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
-#else
-	.word	CONFIG_SYS_TEXT_BASE
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Get the CKGR Base Address */
-	ldr     r1, =AT91C_BASE_CKGR
-	/* Main oscillator Enable register */
-#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
-	ldr     r0, =0x0000FF01		/* Enable main oscillator,  OSCOUNT = 0xFF */
-#else
-	ldr     r0, =0x0000FF00		/* Disable main oscillator, OSCOUNT = 0xFF */
-#endif
-	str     r0, [r1, #AT91C_CKGR_MOR]
-	/* Add loop to compensate Main Oscillator startup time */
-	ldr     r0, =0x00000010
-LoopOsc:
-	subs    r0, r0, #1
-	bhi     LoopOsc
-
-	/* memory control configuration */
-	/* this isn't very elegant, but	 what the heck */
-	ldr	r0, =SMRDATA
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #80
-0:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	0b
-	/* delay - this is all done by guess */
-	ldr	r0, =0x00010000
-	/* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */
-1:
-	subs	r0, r0, #1
-	bhi	1b
-	ldr	r0, =SMRDATA1
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #176
-2:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	2b
-
-	/* switch from FastBus to Asynchronous clock mode */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #0xC0000000	@ set bit 31 (iA) and 30 (nF)
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/* everything is fine now */
-	mov	pc, lr
-
-	.ltorg
-
-SMRDATA:
-	.word AT91C_EBI_CFGR
-	.word CONFIG_SYS_EBI_CFGR_VAL
-	.word AT91C_SMC_CSR0
-	.word CONFIG_SYS_SMC_CSR0_VAL
-	.word AT91C_PLLAR
-	.word CONFIG_SYS_PLLAR_VAL
-	.word AT91C_PLLBR
-	.word CONFIG_SYS_PLLBR_VAL
-	.word AT91C_MCKR
-	.word CONFIG_SYS_MCKR_VAL
-	/* here there's a delay */
-SMRDATA1:
-	.word AT91C_PIOC_ASR
-	.word CONFIG_SYS_PIOC_ASR_VAL
-	.word AT91C_PIOC_BSR
-	.word CONFIG_SYS_PIOC_BSR_VAL
-	.word AT91C_PIOC_PDR
-	.word CONFIG_SYS_PIOC_PDR_VAL
-	.word AT91C_EBI_CSA
-	.word CONFIG_SYS_EBI_CSA_VAL
-	.word AT91C_SDRC_CR
-	.word CONFIG_SYS_SDRC_CR_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL1
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL2
-	.word CONFIG_SYS_SDRAM1
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_TR
-	.word CONFIG_SYS_SDRC_TR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL3
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
--- a/arch/arm/cpu/arm920t/at91rm9200/lxt972.c
+++ b/arch/arm/cpu/arm920t/at91rm9200/lxt972.c
@@ -1,192 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board: 22APR2005
- */
-
-#include <common.h>
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <miiphy.h>
-#include <lxt971a.h>
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	lxt972_IsPhyConnected
- * Description:
- *	Reads the 2 PHY ID registers
- * Arguments:
- *	p_mac - pointer to AT91S_EMAC struct
- * Return value:
- *	TRUE - if id read successfully
- *	FALSE- if error
- */
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac)
-{
-	unsigned short Id1, Id2;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacReadPhy(p_mac, MII_PHYSID1, &Id1);
-	at91rm9200_EmacReadPhy(p_mac, MII_PHYSID2, &Id2);
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	if ((Id1 == (0x0013)) && ((Id2  & 0xFFF0) == 0x78E0))
-		return TRUE;
-
-	return FALSE;
-}
-
-/*
- * Name:
- *	lxt972_GetLinkSpeed
- * Description:
- *	Link parallel detection status of MAC is checked and set in the
- *	MAC configuration registers
- * Arguments:
- *	p_mac - pointer to MAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
-	unsigned short stat1;
-
-	if (!at91rm9200_EmacReadPhy (p_mac, PHY_LXT971_STAT2, &stat1))
-		return FALSE;
-
-	if (!(stat1 & PHY_LXT971_STAT2_LINK))	/* link status up? */
-		return FALSE;
-
-	if (stat1 & PHY_LXT971_STAT2_100BTX) {
-
-		if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-
-			/*set Emac for 100BaseTX and Full Duplex  */
-			p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		} else {
-
-			/*set Emac for 100BaseTX and Half Duplex  */
-			p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-					~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-					| AT91C_EMAC_SPD;
-		}
-
-		return TRUE;
-
-	} else {
-
-		if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-
-			/*set MII for 10BaseT and Full Duplex  */
-			p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-					~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-					| AT91C_EMAC_FD;
-		} else {
-
-			/*set MII for 10BaseT and Half Duplex  */
-			p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
-		}
-
-		return TRUE;
-	}
-
-	return FALSE;
-}
-
-
-/*
- * Name:
- *	lxt972_InitPhy
- * Description:
- *	MAC starts checking its link by using parallel detection and
- *	Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac)
-{
-	UCHAR ret = TRUE;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-
-	if (!lxt972_GetLinkSpeed (p_mac)) {
-		/* Try another time */
-		ret = lxt972_GetLinkSpeed (p_mac);
-	}
-
-	/* Disable PHY Interrupts */
-	at91rm9200_EmacWritePhy (p_mac, PHY_LXT971_INT_ENABLE, 0);
-
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	return (ret);
-}
-
-
-/*
- * Name:
- *	lxt972_AutoNegotiate
- * Description:
- *	MAC Autonegotiates with the partner status of same is set in the
- *	MAC configuration registers
- * Arguments:
- *	dev - pointer to struct net_device
- * Return value:
- *	TRUE - if link status set successfully
- *	FALSE - if link status not set
- */
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
-	unsigned short value;
-
-	/* Set lxt972 control register */
-	if (!at91rm9200_EmacReadPhy (p_mac, MII_BMCR, &value))
-		return FALSE;
-
-	/* Restart Auto_negotiation  */
-	value |= BMCR_ANRESTART;
-	if (!at91rm9200_EmacWritePhy (p_mac, MII_BMCR, &value))
-		return FALSE;
-
-	/*check AutoNegotiate complete */
-	udelay (10000);
-	at91rm9200_EmacReadPhy(p_mac, MII_BMSR, &value);
-	if (!(value & BMSR_ANEGCOMPLETE))
-		return FALSE;
-
-	return (lxt972_GetLinkSpeed (p_mac));
-}
-
-#endif
-
-#endif	/* CONFIG_DRIVER_ETHER */
--- a/arch/arm/cpu/arm920t/at91rm9200/timer.c
+++ b/arch/arm/cpu/arm920t/at91rm9200/timer.c
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-/*#include <asm/io.h>*/
-#include <asm/arch/hardware.h>
-/*#include <asm/proc/ptrace.h>*/
-
-/* the number of clocks per CONFIG_SYS_HZ */
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-
-/* macro to read the 16 bit timer */
-#define READ_TIMER (tmr->TC_CV & 0x0000ffff)
-AT91PS_TC tmr;
-
-static ulong timestamp;
-static ulong lastinc;
-
-int timer_init (void)
-{
-	tmr = AT91C_BASE_TC0;
-
-	/* enables TC1.0 clock */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_TC0;  /* enable clock */
-
-	*AT91C_TCB0_BCR = 0;
-	*AT91C_TCB0_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_NONE | AT91C_TCB_TC2XC2S_NONE;
-	tmr->TC_CCR = AT91C_TC_CLKDIS;
-#define AT91C_TC_CMR_CPCTRG (1 << 14)
-	/* set to MCLK/2 and restart the timer when the vlaue in TC_RC is reached */
-	tmr->TC_CMR = AT91C_TC_TIMER_DIV1_CLOCK | AT91C_TC_CMR_CPCTRG;
-
-	tmr->TC_IDR = ~0ul;
-	tmr->TC_RC = TIMER_LOAD_VAL;
-	lastinc = 0;
-	tmr->TC_CCR = AT91C_TC_SWTRG | AT91C_TC_CLKEN;
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay (unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastinc = READ_TIMER;
-	timestamp = 0;
-}
-
-ulong get_timer_raw (void)
-{
-	ulong now = READ_TIMER;
-
-	if (now >= lastinc) {
-		/* normal mode */
-		timestamp += now - lastinc;
-	} else {
-		/* we have an overflow ... */
-		timestamp += now + TIMER_LOAD_VAL - lastinc;
-	}
-	lastinc = now;
-
-	return timestamp;
-}
-
-ulong get_timer_masked (void)
-{
-	return get_timer_raw()/TIMER_LOAD_VAL;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
-	tmo *= usec;
-	tmo /= 1000;
-
-	endtime = get_timer_raw () + tmo;
-
-	do {
-		ulong now = get_timer_raw ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-	return tbclk;
-}
--- a/arch/arm/cpu/arm920t/cpu.c
+++ b/arch/arm/cpu/arm920t/cpu.c
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_AT91_LEGACY
-#warning Your board is using legacy AT91RM9200 SoC access. Please update!
-#endif
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-	/* flush I/D-cache */
-	cache_flush();
-
-	return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-}
--- a/arch/arm/cpu/arm920t/ep93xx/Makefile
+++ b/arch/arm/cpu/arm920t/ep93xx/Makefile
@@ -1,55 +0,0 @@
-#
-# Cirrus Logic EP93xx CPU-specific Makefile
-#
-# Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
-#
-# Copyright (C) 2004, 2005
-# Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
-#
-# Copyright (C) 2006
-# Dominic Rath <Dominic.Rath@gmx.de>
-#
-# Based on an original Makefile, which is
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(SOC).o
-
-COBJS   = cpu.o led.o speed.o timer.o
-SOBJS   = lowlevel_init.o
-
-SRCS    := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS    := $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:    $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/ep93xx/cpu.c
+++ b/arch/arm/cpu/arm920t/ep93xx/cpu.c
@@ -1,51 +0,0 @@
-/*
- * Cirrus Logic EP93xx CPU-specific support.
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
- *
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-/* We reset the CPU by generating a 1-->0 transition on DeviceCfg bit 31. */
-extern void reset_cpu(ulong addr)
-{
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-	uint32_t value;
-
-	/* Unlock DeviceCfg and set SWRST */
-	writel(0xAA, &syscon->sysswlock);
-	value = readl(&syscon->devicecfg);
-	value |= SYSCON_DEVICECFG_SWRST;
-	writel(value, &syscon->devicecfg);
-
-	/* Unlock DeviceCfg and clear SWRST */
-	writel(0xAA, &syscon->sysswlock);
-	value = readl(&syscon->devicecfg);
-	value &= ~SYSCON_DEVICECFG_SWRST;
-	writel(value, &syscon->devicecfg);
-
-	/* Dying... */
-	while (1)
-		; /* noop */
-}
--- a/arch/arm/cpu/arm920t/ep93xx/led.c
+++ b/arch/arm/cpu/arm920t/ep93xx/led.c
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2010, 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/io.h>
-#include <asm/arch/ep93xx.h>
-#include <config.h>
-#include <status_led.h>
-
-static uint8_t saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-static uint32_t gpio_pin[2] = {1 << STATUS_LED_GREEN,
-			       1 << STATUS_LED_RED};
-
-inline void switch_LED_on(uint8_t led)
-{
-	register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
-
-	writel(readl(&gpio->pedr) | gpio_pin[led], &gpio->pedr);
-	saved_state[led] = STATUS_LED_ON;
-}
-
-inline void switch_LED_off(uint8_t led)
-{
-	register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
-
-	writel(readl(&gpio->pedr) & ~gpio_pin[led], &gpio->pedr);
-	saved_state[led] = STATUS_LED_OFF;
-}
-
-void red_LED_on(void)
-{
-	switch_LED_on(STATUS_LED_RED);
-}
-
-void red_LED_off(void)
-{
-	switch_LED_off(STATUS_LED_RED);
-}
-
-void green_LED_on(void)
-{
-	switch_LED_on(STATUS_LED_GREEN);
-}
-
-void green_LED_off(void)
-{
-	switch_LED_off(STATUS_LED_GREEN);
-}
-
-void __led_init(led_id_t mask, int state)
-{
-	__led_set(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
-	if (STATUS_LED_RED == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_RED])
-			red_LED_off();
-		else
-			red_LED_on();
-	} else if (STATUS_LED_GREEN == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN])
-			green_LED_off();
-		else
-			green_LED_on();
-	}
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	if (STATUS_LED_RED == mask) {
-		if (STATUS_LED_ON == state)
-			red_LED_on();
-		else
-			red_LED_off();
-	} else if (STATUS_LED_GREEN == mask) {
-		if (STATUS_LED_ON == state)
-			green_LED_on();
-		else
-			green_LED_off();
-	}
-}
--- a/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/ep93xx/lowlevel_init.S
@@ -1,65 +0,0 @@
-/*
- * Low-level initialization for EP93xx
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <version.h>
-#include <asm/arch/ep93xx.h>
-
-.globl lowlevel_init
-lowlevel_init:
-	/* backup return address */
-	ldr r1, =SYSCON_SCRATCH0
-	str lr, [r1]
-
-	/* Turn on both LEDs */
-	bl red_LED_on
-	bl green_LED_on
-
-	/* Configure flash wait states before we switch to the PLL */
-	bl flash_cfg
-
-	/* Set up PLL */
-	bl pll_cfg
-
-	/* Turn off the Green LED and leave the Red LED on */
-	bl green_LED_off
-
-	/* Setup SDRAM */
-	bl sdram_cfg
-
-	/* Turn on Green LED, Turn off the Red LED */
-	bl green_LED_on
-	bl red_LED_off
-
-	/* FIXME: we use async mode for now */
-	mrc p15, 0, r0, c1, c0, 0
-	orr r0, r0, #0xc0000000
-	mcr p15, 0, r0, c1, c0, 0
-
-	/* restore return address */
-	ldr r1, =SYSCON_SCRATCH0
-	ldr lr, [r1]
-
-	mov pc, lr
--- a/arch/arm/cpu/arm920t/ep93xx/speed.c
+++ b/arch/arm/cpu/arm920t/ep93xx/speed.c
@@ -1,110 +0,0 @@
-/*
- * Cirrus Logic EP93xx PLL support.
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <div64.h>
-
-/*
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-
-/*
- * return the PLL output frequency
- *
- * PLL rate = CONFIG_SYS_CLK_FREQ * (X1FBD + 1) * (X2FBD + 1)
- * / (X2IPD + 1) / 2^PS
- */
-static ulong get_PLLCLK(uint32_t *pllreg)
-{
-	uint8_t i;
-	const uint32_t clkset = readl(pllreg);
-	uint64_t rate = CONFIG_SYS_CLK_FREQ;
-	rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1;
-	rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1;
-	do_div(rate, (clkset  & 0x1f) + 1);			/* X2IPD */
-	for (i = 0; i < ((clkset >> SYSCON_CLKSET_PLL_PS_SHIFT) & 3); i++)
-		rate >>= 1;
-
-	return (ulong)rate;
-}
-
-/* return FCLK frequency */
-ulong get_FCLK()
-{
-	const uint8_t fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
-	const uint32_t clkset1 = readl(&syscon->clkset1);
-	const uint8_t fclk_div =
-		fclk_divisors[(clkset1 >> SYSCON_CLKSET1_FCLK_DIV_SHIFT) & 7];
-	const ulong fclk_rate = get_PLLCLK(&syscon->clkset1) / fclk_div;
-
-	return fclk_rate;
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	const uint8_t hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
-	const uint32_t clkset1 = readl(&syscon->clkset1);
-	const uint8_t hclk_div =
-		hclk_divisors[(clkset1 >> SYSCON_CLKSET1_HCLK_DIV_SHIFT) & 7];
-	const ulong hclk_rate = get_PLLCLK(&syscon->clkset1) / hclk_div;
-
-	return hclk_rate;
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-	const uint8_t pclk_divisors[] = { 1, 2, 4, 8 };
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
-	const uint32_t clkset1 = readl(&syscon->clkset1);
-	const uint8_t pclk_div =
-		pclk_divisors[(clkset1 >> SYSCON_CLKSET1_PCLK_DIV_SHIFT) & 3];
-	const ulong pclk_rate = get_HCLK() / pclk_div;
-
-	return pclk_rate;
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-	ulong uclk_rate;
-
-	const uint32_t value = readl(&syscon->pwrcnt);
-	if (value & SYSCON_PWRCNT_UART_BAUD)
-		uclk_rate = CONFIG_SYS_CLK_FREQ;
-	else
-		uclk_rate = CONFIG_SYS_CLK_FREQ / 2;
-
-	return uclk_rate;
-}
--- a/arch/arm/cpu/arm920t/ep93xx/timer.c
+++ b/arch/arm/cpu/arm920t/ep93xx/timer.c
@@ -1,143 +0,0 @@
-/*
- * Cirrus Logic EP93xx timer support.
- *
- * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
- *
- * Based on the original intr.c Cirrus Logic EP93xx Rev D. interrupt support,
- * author unknown.
- *
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <div64.h>
-
-#define TIMER_CLKSEL	(1 << 3)
-#define TIMER_ENABLE	(1 << 7)
-
-#define TIMER_FREQ			508469		/* ticks / second */
-#define TIMER_MAX_VAL			0xFFFFFFFF
-
-static struct ep93xx_timer
-{
-	unsigned long long ticks;
-	unsigned long last_read;
-} timer;
-
-static inline unsigned long long usecs_to_ticks(unsigned long usecs)
-{
-	unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ;
-	do_div(ticks, 1000 * 1000);
-
-	return ticks;
-}
-
-static inline void read_timer(void)
-{
-	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
-	const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value);
-
-	if (now >= timer.last_read)
-		timer.ticks += now - timer.last_read;
-	else
-		/* an overflow occurred */
-		timer.ticks += TIMER_MAX_VAL - timer.last_read + now;
-
-	timer.last_read = now;
-}
-
-/*
- * Get the number of ticks (in CONFIG_SYS_HZ resolution)
- */
-unsigned long long get_ticks(void)
-{
-	unsigned long long sys_ticks;
-
-	read_timer();
-
-	sys_ticks = timer.ticks * CONFIG_SYS_HZ;
-	do_div(sys_ticks, TIMER_FREQ);
-
-	return sys_ticks;
-}
-
-unsigned long get_timer_masked(void)
-{
-	return get_ticks();
-}
-
-unsigned long get_timer(unsigned long base)
-{
-	return get_timer_masked() - base;
-}
-
-void reset_timer_masked(void)
-{
-	read_timer();
-	timer.ticks = 0;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long target;
-
-	read_timer();
-
-	target = timer.ticks + usecs_to_ticks(usec);
-
-	while (timer.ticks < target)
-		read_timer();
-}
-
-int timer_init(void)
-{
-	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
-
-	/* use timer 3 with 508KHz and free running, not enabled now */
-	writel(TIMER_CLKSEL, &timer_regs->timer3.control);
-
-	/* set initial timer value */
-	writel(TIMER_MAX_VAL, &timer_regs->timer3.load);
-
-	/* Enable the timer */
-	writel(TIMER_ENABLE | TIMER_CLKSEL,
-		&timer_regs->timer3.control);
-
-	reset_timer_masked();
-
-	return 0;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-unsigned long get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -1,61 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  arch/arm/cpu/arm920t/start.o	(.text)
-		/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
-	  . = 0x1000;
-	  LONG(0x53555243)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	__bss_end__ = .;
-
-	_end = .;
-}
--- a/arch/arm/cpu/arm920t/imx/Makefile
+++ b/arch/arm/cpu/arm920t/imx/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	+= generic.o
-COBJS	+= speed.o
-COBJS	+= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/imx/timer.c
+++ b/arch/arm/cpu/arm920t/imx/timer.c
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#if defined (CONFIG_IMX)
-
-#include <asm/arch/imx-regs.h>
-
-int timer_init (void)
-{
-	int i;
-	/* setup GP Timer 1 */
-	TCTL1 = TCTL_SWR;
-	for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
-	TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
-	TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
-
-	reset_timer_masked();
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer (ulong t)
-{
-	/* nop */
-}
-
-void reset_timer_masked (void)
-{
-	TCTL1 &= ~TCTL_TEN;
-	TCTL1 |= TCTL_TEN; /* Enable timer */
-}
-
-ulong get_timer_masked (void)
-{
-	return TCN1;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong endtime = get_timer_masked() + usec;
-	signed long diff;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-void __udelay (unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-
-	return tbclk;
-}
-
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu (ulong ignored)
-{
-	/* Disable watchdog and set Time-Out field to 0 */
-	WCR = 0x00000000;
-
-	/* Write Service Sequence */
-	WSR = 0x00005555;
-	WSR = 0x0000AAAA;
-
-	/* Enable watchdog */
-	WCR = 0x00000001;
-
-	while (1);
-	/*NOTREACHED*/
-}
-
-#endif /* defined (CONFIG_IMX) */
--- a/arch/arm/cpu/arm920t/ks8695/Makefile
+++ b/arch/arm/cpu/arm920t/ks8695/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	= lowlevel_init.o
-
-COBJS	= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/ks8695/timer.c
+++ b/arch/arm/cpu/arm920t/ks8695/timer.c
@@ -1,108 +0,0 @@
-/*
- * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-
-/*
- * Handy KS8695 register access functions.
- */
-#define	ks8695_read(a)    *((volatile ulong *) (KS8695_IO_BASE + (a)))
-#define	ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v)
-
-ulong timer_ticks;
-
-int timer_init (void)
-{
-	reset_timer();
-
-	return 0;
-}
-
-/*
- * Initial timer set constants. Nothing complicated, just set for a 1ms
- * tick.
- */
-#define	TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_1)
-#define	TIMER_COUNT	(TIMER_INTERVAL / 2)
-#define	TIMER_PULSE	TIMER_COUNT
-
-void reset_timer_masked(void)
-{
-	/* Set the hadware timer for 1ms */
-	ks8695_write(KS8695_TIMER1, TIMER_COUNT);
-	ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE);
-	ks8695_write(KS8695_TIMER_CTRL, 0x2);
-	timer_ticks = 0;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer_masked(void)
-{
-	/* Check for timer wrap */
-	if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) {
-		/* Clear interrupt condition */
-		ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1);
-		timer_ticks++;
-	}
-	return timer_ticks;
-}
-
-ulong get_timer(ulong base)
-{
-       return (get_timer_masked() - base);
-}
-
-void set_timer(ulong t)
-{
-	timer_ticks = t;
-}
-
-void __udelay(ulong usec)
-{
-	ulong start = get_timer_masked();
-	ulong end;
-
-	/* Only 1ms resolution :-( */
-	end = usec / 1000;
-	while (get_timer(start) < end)
-		;
-}
-
-void reset_cpu (ulong ignored)
-{
-	ulong tc;
-
-	/* Set timer0 to watchdog, and let it timeout */
-	tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2;
-	ks8695_write(KS8695_TIMER_CTRL, tc);
-	ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff));
-	ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1));
-
-	/* Should only wait here till watchdog resets */
-	for (;;)
-		;
-}
--- a/arch/arm/cpu/arm920t/s3c24x0/Makefile
+++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS-$(CONFIG_USE_IRQ) += interrupts.o
-COBJS-y	+= speed.o
-COBJS-y	+= timer.o
-COBJS-y	+= usb.o
-COBJS-y	+= usb_ohci.o
-
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm920t/s3c24x0/interrupts.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/interrupts.c
@@ -1,42 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/proc-armv/ptrace.h>
-
-void do_irq (struct pt_regs *pt_regs)
-{
-	struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
-	u_int32_t intpnd = readl(&irq->INTPND);
-
-}
--- a/arch/arm/cpu/arm920t/s3c24x0/speed.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/speed.c
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same PLL and clock machinery inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-#ifdef CONFIG_S3C24X0
-
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#define MPLL 0
-#define UPLL 1
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-static ulong get_PLLCLK(int pllreg)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	ulong r, m, p, s;
-
-	if (pllreg == MPLL)
-		r = readl(&clk_power->mpllcon);
-	else if (pllreg == UPLL)
-		r = readl(&clk_power->upllcon);
-	else
-		hang();
-
-	m = ((r & 0xFF000) >> 12) + 8;
-	p = ((r & 0x003F0) >> 4) + 2;
-	s = r & 0x3;
-
-#if defined(CONFIG_S3C2440)
-	if (pllreg == MPLL)
-		return 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s));
-#endif
-	return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
-
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
-	return get_PLLCLK(MPLL);
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-#ifdef CONFIG_S3C2440
-	switch (readl(&clk_power->clkdivn) & 0x6) {
-	default:
-	case 0:
-		return get_FCLK();
-	case 2:
-		return get_FCLK() / 2;
-	case 4:
-		return (readl(&clk_power->camdivn) & (1 << 9)) ?
-			get_FCLK() / 8 : get_FCLK() / 4;
-	case 6:
-		return (readl(&clk_power->camdivn) & (1 << 8)) ?
-			get_FCLK() / 6 : get_FCLK() / 3;
-	}
-#else
-	return (readl(&clk_power->clkdivn) & 2) ? get_FCLK() / 2 : get_FCLK();
-#endif
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
-	return (readl(&clk_power->clkdivn) & 1) ? get_HCLK() / 2 : get_HCLK();
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-	return get_PLLCLK(UPLL);
-}
-
-#endif /* CONFIG_S3C24X0 */
--- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#ifdef CONFIG_S3C24X0
-
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-int timer_load_val = 0;
-static ulong timer_clk;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
-	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
-
-	return readl(&timers->tcnto4) & 0xffff;
-}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init(void)
-{
-	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
-	ulong tmr;
-
-	/* use PWM Timer 4 because it has no output */
-	/* prescaler for Timer 4 is 16 */
-	writel(0x0f00, &timers->tcfg0);
-	if (timer_load_val == 0) {
-		/*
-		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
-		 * (default) and prescaler = 16. Should be 10390
-		 * @33.25MHz and 15625 @ 50 MHz
-		 */
-		timer_load_val = get_PCLK() / (2 * 16 * 100);
-		timer_clk = get_PCLK() / (2 * 16);
-	}
-	/* load value for 10 ms timeout */
-	lastdec = timer_load_val;
-	writel(timer_load_val, &timers->tcntb4);
-	/* auto load, manual update of timer 4 */
-	tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
-	writel(tmr, &timers->tcon);
-	/* auto load, start timer 4 */
-	tmr = (tmr & ~0x0700000) | 0x0500000;
-	writel(tmr, &timers->tcon);
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay (unsigned long usec)
-{
-	ulong tmo;
-	ulong start = get_ticks();
-
-	tmo = usec / 1000;
-	tmo *= (timer_load_val * 100);
-	tmo /= 1000;
-
-	while ((ulong) (get_ticks() - start) < tmo)
-		/*NOP*/;
-}
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	lastdec = READ_TIMER();
-	timestamp = 0;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong tmr = get_ticks();
-
-	return tmr / (timer_clk / CONFIG_SYS_HZ);
-}
-
-void udelay_masked(unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= (timer_load_val * 100);
-		tmo /= 1000;
-	} else {
-		tmo = usec * (timer_load_val * 100);
-		tmo /= (1000 * 1000);
-	}
-
-	endtime = get_ticks() + tmo;
-
-	do {
-		ulong now = get_ticks();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	ulong now = READ_TIMER();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	ulong tbclk;
-
-#if defined(CONFIG_SMDK2400)
-	tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SBC2410X) || \
-      defined(CONFIG_SMDK2410) || \
-	defined(CONFIG_S3C2440) || \
-      defined(CONFIG_VCMA9)
-	tbclk = CONFIG_SYS_HZ;
-#else
-#	error "tbclk not configured"
-#endif
-
-	return tbclk;
-}
-
-/*
- * reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu(ulong ignored)
-{
-	struct s3c24x0_watchdog *watchdog;
-
-	watchdog = s3c24x0_get_base_watchdog();
-
-	/* Disable watchdog */
-	writel(0x0000, &watchdog->wtcon);
-
-	/* Initialize watchdog timer count register */
-	writel(0x0001, &watchdog->wtcnt);
-
-	/* Enable watchdog timer; assert reset at timer timeout */
-	writel(0x0021, &watchdog->wtcon);
-
-	while (1)
-		/* loop forever and wait for reset to happen */;
-
-	/*NOTREACHED*/
-}
-
-#endif /* CONFIG_S3C24X0 */
--- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb.c
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && \
-    defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-    defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-
-int usb_cpu_init(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
-	/*
-	 * Set the 48 MHz UPLL clocking. Values are taken from
-	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
-	 */
-	writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
-	/* 1 = use pads related USB for USB host */
-	writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
-
-	/*
-	 * Enable USB host clock.
-	 */
-	writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
-
-	return 0;
-}
-
-int usb_cpu_stop(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	/* may not want to do this */
-	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
-	return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI_NEW) && \
-	   defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-	   defined(CONFIG_S3C24X0) */
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -1,520 +0,0 @@
-/*
- *  armboot - Startup Code for ARM920 CPU-core
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <common.h>
-#include <config.h>
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:	b	start_code
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:	.word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (called from the ARM reset exception vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual start code
- */
-
-start_code:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0, cpsr
-	bic	r0, r0, #0x1f
-	orr	r0, r0, #0xd3
-	msr	cpsr, r0
-
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
-	/*
-	 * relocate exception table
-	 */
-	ldr	r0, =_start
-	ldr	r1, =0x0
-	mov	r2, #16
-copyex:
-	subs	r2, r2, #1
-	ldr	r3, [r0], #4
-	str	r3, [r1], #4
-	bne	copyex
-#endif
-
-#ifdef CONFIG_S3C24X0
-	/* turn off the watchdog */
-
-# if defined(CONFIG_S3C2400)
-#  define pWTCON	0x15300000
-#  define INTMSK	0x14400008	/* Interupt-Controller base addresses */
-#  define CLKDIVN	0x14800014	/* clock divisor register */
-#else
-#  define pWTCON	0x53000000
-#  define INTMSK	0x4A000008	/* Interupt-Controller base addresses */
-#  define INTSUBMSK	0x4A00001C
-#  define CLKDIVN	0x4C000014	/* clock divisor register */
-# endif
-
-	ldr	r0, =pWTCON
-	mov	r1, #0x0
-	str	r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =INTMSK
-	str	r1, [r0]
-# if defined(CONFIG_S3C2410)
-	ldr	r1, =0x3ff
-	ldr	r0, =INTSUBMSK
-	str	r1, [r0]
-# endif
-
-	/* FCLK:HCLK:PCLK = 1:2:4 */
-	/* default FCLK is 120 MHz ! */
-	ldr	r0, =CLKDIVN
-	mov	r1, #3
-	str	r1, [r0]
-#endif	/* CONFIG_S3C24X0 */
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_PRELOADER
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
-	bl coloured_LED_init
-	bl red_LED_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
-	ldr     r0, _nand_boot_ofs
-	mov	pc, r0
-
-_nand_boot_ofs:
-	.word nand_boot
-#else
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-#endif
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	mov	ip, lr
-
-	bl	lowlevel_init
-
-	mov	lr, ip
-	mov	pc, lr
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC	0x13
-#define I_BIT		0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	ldr	r2, IRQ_STACK_START_IN
-	ldmia	r2, {r2 - r3}			@ get pc, cpsr
-	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add	r7, sp, #S_PC
-	stmdb	r7, {sp, lr}^			@ Calling SP, LR
-	str	lr, [r7, #0]			@ Save calling PC
-	mrs	r6, spsr
-	str	r6, [r7, #4]			@ Save CPSR
-	str	r0, [r7, #8]			@ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	/* return & move spsr_svc into cpsr */
-	subs	pc, lr, #4
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str	lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
--- a/arch/arm/cpu/arm920t/u-boot.lds
+++ b/arch/arm/cpu/arm920t/u-boot.lds
@@ -1,88 +0,0 @@
-/*
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		arch/arm/cpu/arm920t/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	}
-
-	. = ALIGN(4);
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end__ = .;
-	}
-
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
--- a/arch/arm/cpu/arm925t/Makefile
+++ b/arch/arm/cpu/arm925t/Makefile
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-
-COBJS	+= cpu.o
-COBJS	+= omap925.o
-COBJS	+= timer.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -1,519 +0,0 @@
-/*
- *  armboot - Startup Code for ARM925 CPU-core
- *
- *  Copyright (c) 2003  Texas Instruments
- *
- *  ----- Adapted for OMAP1510 from ARM920 code ------
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
- *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
- *  Copyright (c) 2003	Kshitij	 <kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:	b       reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:	.word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * setup Memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * Set up 925T mode
-	 */
-	mov r1, #0x81               /* Set ARM925T configuration. */
-	mcr p15, 0, r1, c15, c1, 0  /* Write ARM925T configuration register. */
-
-	/*
-	 * turn off the watchdog, unlock/diable sequence
-	 */
-	mov  r1, #0xF5
-	ldr  r0, =WDTIM_MODE
-	strh r1, [r0]
-	mov  r1, #0xA0
-	strh r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
-	 */
-	mov r1, #0xffffffff
-	ldr r0, =REG_IHL1_MIR
-	str r1, [r0]
-	ldr r0, =REG_IHL2_MIR
-	str r1, [r0]
-
-	/*
-	 * wait for dpll to lock
-	 */
-	ldr  r0, =CK_DPLL1
-	mov  r1, #0x10
-	strh r1, [r0]
-poll1:
-	ldrh r1, [r0]
-	ands r1, r1, #0x01
-	beq poll1
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl  cpu_init_crit
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_PRELOADER
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_PRELOADER
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
-	bl coloured_LED_init
-	bl red_LED_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-#ifdef CONFIG_NAND_SPL
-	ldr     r0, _nand_boot_ofs
-	mov	pc, r0
-
-_nand_boot_ofs:
-	.word nand_boot
-#else
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-#endif
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/*
-	 * Go setup Memory and board specific bits prior to relocation.
-	 */
-	mov	ip, lr          /* perserve link reg across call */
-	bl	lowlevel_init   /* go setup pll,mux,memory */
-	mov	lr, ip          /* restore link */
-	mov	pc, lr          /* back to my caller */
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE           @ carve out a frame on current user stack
-	stmia	sp, {r0 - r12}			@ Save user registers (now in svc mode) r0-r12
-
-	ldr	r2, IRQ_STACK_START_IN
-	ldmia	r2, {r2 - r3}                   @ get values for "aborted" pc and cpsr (into parm regs)
-	add	r0, sp, #S_FRAME_SIZE		@ grab pointer to old stack
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}                   @ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp                          @ save current stack into r0 (param register)
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add     r8, sp, #S_PC                   @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
-	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
-	str     lr, [r8, #0]                    @ Save calling PC
-	mrs     r6, spsr
-	str     r6, [r8, #4]                    @ Save CPSR
-	str     r0, [r8, #8]                    @ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN
-
-	str	lr, [r13]			@ save caller lr in position 0 of saved stack
-	mrs	lr, spsr                        @ get the spsr
-	str     lr, [r13, #4]                   @ save spsr in position 1 of saved stack
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13                       @ switch modes, make sure moves will execute
-	mov	lr, pc                          @ capture return pc
-	movs	pc, lr                          @ jump to next instruction & switch modes.
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, rstctl1     /* get clkm1 reset ctl */
-	mov     r3, #0x3	/* dsp_en + arm_rst = global reset */
-	strh	r3, [r1]        /* force reset */
-	mov	r0, r0
-_loop_forever:
-	b	_loop_forever
-rstctl1:
-	.word	0xfffece10
--- a/arch/arm/cpu/arm925t/timer.c
+++ b/arch/arm/cpu/arm925t/timer.c
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2009
- * 2N Telekomunikace, <www.2n.cz>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <arm925t.h>
-#include <configs/omap1510.h>
-#include <asm/io.h>
-
-#define TIMER_LOAD_VAL	0xffffffff
-#define TIMER_CLOCK	(CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
-
-static uint32_t timestamp;
-static uint32_t lastdec;
-
-/* nothing really to do with interrupts, just starts up a counter. */
-int timer_init (void)
-{
-	/* Start the decrementer ticking down from 0xffffffff */
-	__raw_writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + LOAD_TIM);
-	__raw_writel(MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE |
-		(CONFIG_SYS_PTV << MPUTIM_PTV_BIT),
-		CONFIG_SYS_TIMERBASE + CNTL_TIMER);
-
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay (unsigned long usec)
-{
-	int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000;
-	uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
-
-	while (tmo > 0) {
-		now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
-		if (last < now) /* count down timer underflow */
-			tmo -= TIMER_LOAD_VAL - now + last;
-		else
-			tmo -= last - now;
-		last = now;
-	}
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) /
-			(TIMER_CLOCK / CONFIG_SYS_HZ);
-	timestamp = 0;	       /* start "advancing" time stamp from 0 */
-}
-
-ulong get_timer_masked (void)
-{
-	uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) /
-			(TIMER_CLOCK / CONFIG_SYS_HZ);
-	if (lastdec < now)	/* count down timer underflow */
-		timestamp += TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ) -
-				now + lastdec;
-	else
-		timestamp += lastdec - now;
-	lastdec = now;
-
-	return timestamp;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	return CONFIG_SYS_HZ;
-}
--- a/arch/arm/cpu/arm925t/u-boot.lds
+++ b/arch/arm/cpu/arm925t/u-boot.lds
@@ -1,83 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, <wg@denx.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		arch/arm/cpu/arm925t/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : {
-		*(.data)
-	}
-
-	. = ALIGN(4);
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	}
-
-	.dynsym : {
-		__dynsym_start = .;
-		*(.dynsym)
-	}
-
-	_end = .;
-
-	.bss __rel_dyn_start (OVERLAY) : {
-		__bss_start = .;
-		*(.bss)
-		 . = ALIGN(4);
-		__bss_end__ = .;
-	}
-
-	/DISCARD/ : { *(.dynstr*) }
-	/DISCARD/ : { *(.dynamic*) }
-	/DISCARD/ : { *(.plt*) }
-	/DISCARD/ : { *(.interp*) }
-	/DISCARD/ : { *(.gnu*) }
-}
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-COBJS	= cpu.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm926ejs/armada100/Makefile
+++ b/arch/arm/cpu/arm926ejs/armada100/Makefile
@@ -1,46 +0,0 @@
-#
-# (C) Copyright 2010
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-# MA 02110-1301 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS-y	= cpu.o timer.o dram.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm926ejs/armada100/cpu.c
+++ b/arch/arm/cpu/arm926ejs/armada100/cpu.c
@@ -1,108 +0,0 @@
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <asm/arch/armada100.h>
-#include <asm/io.h>
-
-#define UARTCLK14745KHZ	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
-#define SET_MRVL_ID	(1<<8)
-#define L2C_RAM_SEL	(1<<4)
-
-int arch_cpu_init(void)
-{
-	u32 val;
-	struct armd1cpu_registers *cpuregs =
-		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
-
-	struct armd1apb1_registers *apb1clkres =
-		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
-
-	struct armd1mpmu_registers *mpmu =
-		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
-
-	/* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
-	val = readl(&cpuregs->cpu_conf);
-	val = val | SET_MRVL_ID;
-	writel(val, &cpuregs->cpu_conf);
-
-	/* Enable Clocks for all hardware units */
-	writel(0xFFFFFFFF, &mpmu->acgr);
-
-	/* Turn on AIB and AIB-APB Functional clock */
-	writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);
-
-	/* ensure L2 cache is not mapped as SRAM */
-	val = readl(&cpuregs->cpu_conf);
-	val = val & ~(L2C_RAM_SEL);
-	writel(val, &cpuregs->cpu_conf);
-
-	/* Enable GPIO clock */
-	writel(APBC_APBCLK, &apb1clkres->gpio);
-
-#ifdef CONFIG_I2C_MV
-	/* Enable general I2C clock */
-	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
-	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
-
-	/* Enable power I2C clock */
-	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
-	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
-#endif
-
-	/*
-	 * Enable Functional and APB clock at 14.7456MHz
-	 * for configured UART console
-	 */
-#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
-	writel(UARTCLK14745KHZ, &apb1clkres->uart3);
-#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
-	writel(UARTCLK14745KHZ, &apb1clkres->uart2);
-#else
-	writel(UARTCLK14745KHZ, &apb1clkres->uart1);
-#endif
-	icache_enable();
-
-	return 0;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	u32 id;
-	struct armd1cpu_registers *cpuregs =
-		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
-
-	id = readl(&cpuregs->chip_id);
-	printf("SoC:   Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_I2C_MV
-void i2c_clk_enable(void)
-{
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/armada100/dram.c
+++ b/arch/arm/cpu/arm926ejs/armada100/dram.c
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>,
- * Contributor: Mahavir Jain <mjain@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <asm/arch/armada100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * ARMADA100 DRAM controller supports upto 8 banks
- * for chip select 0 and 1
- */
-
-/*
- * DDR Memory Control Registers
- * Refer Datasheet Appendix A.17
- */
-struct armd1ddr_map_registers {
-	u32	cs;	/* Memory Address Map Register -CS */
-	u32	pad[3];
-};
-
-struct armd1ddr_registers {
-	u8	pad[0x100 - 0x000];
-	struct armd1ddr_map_registers mmap[2];
-};
-
-/*
- * armd1_sdram_base - reads SDRAM Base Address Register
- */
-u32 armd1_sdram_base(int chip_sel)
-{
-	struct armd1ddr_registers *ddr_regs =
-		(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
-	u32 result = 0;
-	u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
-	if (!CS_valid)
-		return 0;
-
-	result = readl(&ddr_regs->mmap[chip_sel].cs) & 0xFF800000;
-	return result;
-}
-
-/*
- * armd1_sdram_size - reads SDRAM size
- */
-u32 armd1_sdram_size(int chip_sel)
-{
-	struct armd1ddr_registers *ddr_regs =
-		(struct armd1ddr_registers *)ARMD1_DRAM_BASE;
-	u32 result = 0;
-	u32 CS_valid = 0x01 & readl(&ddr_regs->mmap[chip_sel].cs);
-
-	if (!CS_valid)
-		return 0;
-
-	result = readl(&ddr_regs->mmap[chip_sel].cs);
-	result = (result >> 16) & 0xF;
-	if (result < 0x7) {
-		printf("Unknown DRAM Size\n");
-		return -1;
-	} else {
-		return ((0x8 << (result - 0x7)) * 1024 * 1024);
-	}
-}
-
-#ifndef CONFIG_SYS_BOARD_DRAM_INIT
-int dram_init(void)
-{
-	int i;
-
-	gd->ram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = armd1_sdram_base(i);
-		gd->bd->bi_dram[i].size = armd1_sdram_size(i);
-		/*
-		 * It is assumed that all memory banks are consecutive
-		 * and without gaps.
-		 * If the gap is found, ram_size will be reported for
-		 * consecutive memory only
-		 */
-		if (gd->bd->bi_dram[i].start != gd->ram_size)
-			break;
-
-		gd->ram_size += gd->bd->bi_dram[i].size;
-
-	}
-
-	for (; i < CONFIG_NR_DRAM_BANKS; i++) {
-		/* If above loop terminated prematurely, we need to set
-		 * remaining banks' start address & size as 0. Otherwise other
-		 * u-boot functions and Linux kernel gets wrong values which
-		 * could result in crash */
-		gd->bd->bi_dram[i].start = 0;
-		gd->bd->bi_dram[i].size = 0;
-	}
-	return 0;
-}
-
-/*
- * If this function is not defined here,
- * board.c alters dram bank zero configuration defined above.
- */
-void dram_init_banksize(void)
-{
-	dram_init();
-}
-#endif /* CONFIG_SYS_BOARD_DRAM_INIT */
--- a/arch/arm/cpu/arm926ejs/armada100/timer.c
+++ b/arch/arm/cpu/arm926ejs/armada100/timer.c
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <common.h>
-#include <asm/arch/armada100.h>
-
-/*
- * Timer registers
- * Refer Section A.6 in Datasheet
- */
-struct armd1tmr_registers {
-	u32 clk_ctrl;	/* Timer clk control reg */
-	u32 match[9];	/* Timer match registers */
-	u32 count[3];	/* Timer count registers */
-	u32 status[3];
-	u32 ie[3];
-	u32 preload[3];	/* Timer preload value */
-	u32 preload_ctrl[3];
-	u32 wdt_match_en;
-	u32 wdt_match_r;
-	u32 wdt_val;
-	u32 wdt_sts;
-	u32 icr[3];
-	u32 wdt_icr;
-	u32 cer;	/* Timer count enable reg */
-	u32 cmr;
-	u32 ilr[3];
-	u32 wcr;
-	u32 wfar;
-	u32 wsar;
-	u32 cvwr;
-};
-
-#define TIMER			0	/* Use TIMER 0 */
-/* Each timer has 3 match registers */
-#define MATCH_CMP(x)		((3 * TIMER) + x)
-#define TIMER_LOAD_VAL 		0xffffffff
-#define	COUNT_RD_REQ		0x1
-
-DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->tbu from timestamp and gd->tbl for lastdec */
-
-/* For preventing risk of instability in reading counter value,
- * first set read request to register cvwr and then read same
- * register after it captures counter value.
- */
-ulong read_timer(void)
-{
-	struct armd1tmr_registers *armd1timers =
-		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-	volatile int loop=100;
-
-	writel(COUNT_RD_REQ, &armd1timers->cvwr);
-	while (loop--);
-	return(readl(&armd1timers->cvwr));
-}
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	gd->tbl = read_timer();
-	gd->tbu = 0;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong now = read_timer();
-
-	if (now >= gd->tbl) {
-		/* normal mode */
-		gd->tbu += now - gd->tbl;
-	} else {
-		/* we have an overflow ... */
-		gd->tbu += now + TIMER_LOAD_VAL - gd->tbl;
-	}
-	gd->tbl = now;
-
-	return gd->tbu;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) -
-		base);
-}
-
-void set_timer(ulong t)
-{
-	gd->tbu = t;
-}
-
-void __udelay(unsigned long usec)
-{
-	ulong delayticks;
-	ulong endtime;
-
-	delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000));
-	endtime = get_timer_masked() + delayticks;
-
-	while (get_timer_masked() < endtime);
-}
-
-/*
- * init the Timer
- */
-int timer_init(void)
-{
-	struct armd1apb1_registers *apb1clkres =
-		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
-	struct armd1tmr_registers *armd1timers =
-		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-
-	/* Enable Timer clock at 3.25 MHZ */
-	writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers);
-
-	/* load value into timer */
-	writel(0x0, &armd1timers->clk_ctrl);
-	/* Use Timer 0 Match Resiger 0 */
-	writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]);
-	/* Preload value is 0 */
-	writel(0x0, &armd1timers->preload[TIMER]);
-	/* Enable match comparator 0 for Timer 0 */
-	writel(0x1, &armd1timers->preload_ctrl[TIMER]);
-
-	/* Enable timer 0 */
-	writel(0x1, &armd1timers->cer);
-	/* init the gd->tbu and gd->tbl value */
-	reset_timer_masked();
-
-	return 0;
-}
-
-#define MPMU_APRR_WDTR	(1<<4)
-#define TMR_WFAR	0xbaba	/* WDT Register First key */
-#define TMP_WSAR	0xeb10	/* WDT Register Second key */
-
-/*
- * This function uses internal Watchdog Timer
- * based reset mechanism.
- * Steps to write watchdog registers (protected access)
- * 1. Write key value to TMR_WFAR reg.
- * 2. Write key value to TMP_WSAR reg.
- * 3. Perform write operation.
- */
-void reset_cpu (unsigned long ignored)
-{
-	struct armd1mpmu_registers *mpmu =
-		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
-	struct armd1tmr_registers *armd1timers =
-		(struct armd1tmr_registers *) ARMD1_TIMER_BASE;
-	u32 val;
-
-	/* negate hardware reset to the WDT after system reset */
-	val = readl(&mpmu->aprr);
-	val = val | MPMU_APRR_WDTR;
-	writel(val, &mpmu->aprr);
-
-	/* reset/enable WDT clock */
-	writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr);
-	readl(&mpmu->wdtpcr);
-	writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr);
-	readl(&mpmu->wdtpcr);
-
-	/* clear previous WDT status */
-	writel(TMR_WFAR, &armd1timers->wfar);
-	writel(TMP_WSAR, &armd1timers->wsar);
-	writel(0, &armd1timers->wdt_sts);
-
-	/* set match counter */
-	writel(TMR_WFAR, &armd1timers->wfar);
-	writel(TMP_WSAR, &armd1timers->wsar);
-	writel(0xf, &armd1timers->wdt_match_r);
-
-	/* enable WDT reset */
-	writel(TMR_WFAR, &armd1timers->wfar);
-	writel(TMP_WSAR, &armd1timers->wsar);
-	writel(0x3, &armd1timers->wdt_match_en);
-
-	while(1);
-}
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -1,64 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS-$(CONFIG_AT91CAP9)	+= at91cap9_devices.o
-COBJS-$(CONFIG_AT91SAM9260)	+= at91sam9260_devices.o
-COBJS-$(CONFIG_AT91SAM9G20)	+= at91sam9260_devices.o
-COBJS-$(CONFIG_AT91SAM9XE)	+= at91sam9260_devices.o
-COBJS-$(CONFIG_AT91SAM9261)	+= at91sam9261_devices.o
-COBJS-$(CONFIG_AT91SAM9G10)	+= at91sam9261_devices.o
-COBJS-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
-COBJS-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
-COBJS-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
-COBJS-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
-COBJS-$(CONFIG_AT91_EFLASH)	+= eflash.o
-COBJS-$(CONFIG_AT91_LED)	+= led.o
-COBJS-y += clock.o
-COBJS-y += cpu.o
-COBJS-y	+= reset.o
-COBJS-y	+= timer.o
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-SOBJS-y	:= lowlevel_init.o
-endif
-
-SRCS    := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS    := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
--- a/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 22, 1);		/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 23, 0);		/* RXD0 */
-	writel(1 << AT91CAP9_ID_US0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTD, 1, 0);		/* RXD1 */
-	writel(1 << AT91CAP9_ID_US1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTD, 3, 0);		/* RXD2 */
-	writel(1 << AT91CAP9_ID_US2, &pmc->pcer);
-}
-
-void at91_serial3_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 30, 0);		/* DRXD */
-	at91_set_a_periph(AT91_PIO_PORTC, 31, 1);		/* DTXD */
-	writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-	at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
-	at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
-	at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3	/* DBGU */
-	at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_b_periph(AT91_PIO_PORTA, 0, 0);	/* SPI0_MISO */
-	at91_set_b_periph(AT91_PIO_PORTA, 1, 0);	/* SPI0_MOSI */
-	at91_set_b_periph(AT91_PIO_PORTA, 2, 0);	/* SPI0_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91CAP9_ID_SPI0, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_b_periph(AT91_PIO_PORTD, 0, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_b_periph(AT91_PIO_PORTD, 1, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 0, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 1, 1);
-	}
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* SPI1_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91CAP9_ID_SPI1, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
-	}
-
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTB, 21, 0);	/* ETXCK_EREFCK */
-	at91_set_a_periph(AT91_PIO_PORTB, 22, 0);	/* ERXDV */
-	at91_set_a_periph(AT91_PIO_PORTB, 25, 0);	/* ERX0 */
-	at91_set_a_periph(AT91_PIO_PORTB, 26, 0);	/* ERX1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 27, 0);	/* ERXER */
-	at91_set_a_periph(AT91_PIO_PORTB, 28, 0);	/* ETXEN */
-	at91_set_a_periph(AT91_PIO_PORTB, 23, 0);	/* ETX0 */
-	at91_set_a_periph(AT91_PIO_PORTB, 24, 0);	/* ETX1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* EMDIO */
-	at91_set_a_periph(AT91_PIO_PORTB, 29, 0);	/* EMDC */
-
-#ifndef CONFIG_RMII
-	at91_set_b_periph(AT91_PIO_PORTC, 25, 0);	/* ECRS */
-	at91_set_b_periph(AT91_PIO_PORTC, 26, 0);	/* ECOL */
-	at91_set_b_periph(AT91_PIO_PORTC, 22, 0);	/* ERX2 */
-	at91_set_b_periph(AT91_PIO_PORTC, 23, 0);	/* ERX3 */
-	at91_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ERXCK */
-	at91_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ETX2 */
-	at91_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ETX3 */
-	at91_set_b_periph(AT91_PIO_PORTC, 24, 0);	/* ETXER */
-#endif
-}
-#endif
-
-#ifdef CONFIG_AT91_CAN
-void at91_can_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* CAN_TX */
-	at91_set_a_periph(AT91_PIO_PORTA, 13, 1);	/* CAN_RX */
-
-	/* Enable clock */
-	writel(1 << AT91CAP9_ID_CAN, &pmc->pcer);
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -1,217 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-
-/*
- * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
- * peripheral pins. Good to have if hardware is soldered optionally
- * or in case of SPI no slave is selected. Avoid lines to float
- * needlessly. Use a short local PUP define.
- *
- * Due to errata "TXD floats when CTS is inactive" pullups are always
- * on for TXD pins.
- */
-#ifdef CONFIG_AT91_GPIO_PULLUP
-# define PUP CONFIG_AT91_GPIO_PULLUP
-#else
-# define PUP 0
-#endif
-
-void at91_serial0_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 4, 1);		/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTB, 5, PUP);		/* RXD0 */
-	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 6, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 7, PUP);		/* RXD1 */
-	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 8, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTB, 9, PUP);		/* RXD2 */
-	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
-}
-
-void at91_seriald_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 14, PUP);		/* DRXD */
-	at91_set_a_periph(AT91_PIO_PORTB, 15, 1);		/* DTXD */
-	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
-}
-
-#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 0, PUP);	/* SPI0_MISO */
-	at91_set_a_periph(AT91_PIO_PORTA, 1, PUP);	/* SPI0_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTA, 2, PUP);	/* SPI0_SPCK */
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTC, 11, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_b_periph(AT91_PIO_PORTC, 16, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_b_periph(AT91_PIO_PORTC, 17, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 11, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 16, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 17, 1);
-	}
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 0, PUP);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 1, PUP);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 2, PUP);	/* SPI1_SPCK */
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTC, 5, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_b_periph(AT91_PIO_PORTC, 4, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 5, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 4, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-	}
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* ETXCK_EREFCK */
-	at91_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* ERXDV */
-	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* ERX0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* ERX1 */
-	at91_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* ERXER */
-	at91_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* ETXEN */
-	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* ETX0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* ETX1 */
-	at91_set_a_periph(AT91_PIO_PORTA, 21, 0);	/* EMDIO */
-	at91_set_a_periph(AT91_PIO_PORTA, 20, 0);	/* EMDC */
-
-#ifndef CONFIG_RMII
-	at91_set_b_periph(AT91_PIO_PORTA, 28, 0);	/* ECRS */
-	at91_set_b_periph(AT91_PIO_PORTA, 29, 0);	/* ECOL */
-	at91_set_b_periph(AT91_PIO_PORTA, 25, 0);	/* ERX2 */
-	at91_set_b_periph(AT91_PIO_PORTA, 26, 0);	/* ERX3 */
-	at91_set_b_periph(AT91_PIO_PORTA, 27, 0);	/* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
-	/*
-	 * use PA10, PA11 for ETX2, ETX3.
-	 * PA23 and PA24 are for TWI EEPROM
-	 */
-	at91_set_b_periph(AT91_PIO_PORTA, 10, 0);	/* ETX2 */
-	at91_set_b_periph(AT91_PIO_PORTA, 11, 0);	/* ETX3 */
-#else
-	at91_set_b_periph(AT91_PIO_PORTA, 23, 0);	/* ETX2 */
-	at91_set_b_periph(AT91_PIO_PORTA, 24, 0);	/* ETX3 */
-#if defined(CONFIG_AT91SAM9G20)
-	/* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */
-	at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0);
-	at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0);
-#endif
-#endif
-	at91_set_b_periph(AT91_PIO_PORTA, 22, 0);	/* ETXER */
-#endif
-}
-#endif
-
-#if defined(CONFIG_ATMEL_MCI) || defined(CONFIG_GENERIC_ATMEL_MCI)
-void at91_mci_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTA, 8, 1);	/* MCCK */
-#if defined(CONFIG_ATMEL_MCI_PORTB)
-	at91_set_b_periph(AT91_PIO_PORTA, 1, 1);	/* MCCDB */
-	at91_set_b_periph(AT91_PIO_PORTA, 0, 1);	/* MCDB0 */
-	at91_set_b_periph(AT91_PIO_PORTA, 5, 1);	/* MCDB1 */
-	at91_set_b_periph(AT91_PIO_PORTA, 4, 1);	/* MCDB2 */
-	at91_set_b_periph(AT91_PIO_PORTA, 3, 1);	/* MCDB3 */
-#else
-	at91_set_a_periph(AT91_PIO_PORTA, 7, 1);	/* MCCDA */
-	at91_set_a_periph(AT91_PIO_PORTA, 6, 1);	/* MCDA0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 9, 1);	/* MCDA1 */
-	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);	/* MCDA2 */
-	at91_set_a_periph(AT91_PIO_PORTA, 11, 1);	/* MCDA3 */
-#endif
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 8, 1);		/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);		/* RXD0 */
-	writel(1 << AT91SAM9261_ID_US0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 12, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTC, 13, 0);		/* RXD1 */
-	writel(1 << AT91SAM9261_ID_US1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 14, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTC, 15, 0);		/* RXD2 */
-	writel(1 << AT91SAM9261_ID_US2, &pmc->pcer);
-}
-
-void at91_serial3_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 9, 0);		/* DRXD */
-	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);		/* DTXD */
-	writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-	at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
-	at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
-	at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3	/* DBGU */
-	at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* SPI0_MISO */
-	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* SPI0_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* SPI0_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91SAM9261_ID_SPI0, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 4, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 5, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 6, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 6, 1);
-	}
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 30, 0);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 31, 0);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 29, 0);	/* SPI1_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91SAM9261_ID_SPI1, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 28, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 24, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 25, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 26, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 28, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 24, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 25, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 26, 1);
-	}
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c
@@ -1,195 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * (C) Copyright 2009-2011
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-
-void at91_serial0_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 26, 1);		/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);		/* RXD0 */
-	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTD, 1, 0);		/* RXD1 */
-	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTD, 3, 0);		/* RXD2 */
-	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
-}
-
-void at91_seriald_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 30, 0);		/* DRXD */
-	at91_set_a_periph(AT91_PIO_PORTC, 31, 1);		/* DTXD */
-	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
-}
-
-#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_b_periph(AT91_PIO_PORTA, 0, 0);	/* SPI0_MISO */
-	at91_set_b_periph(AT91_PIO_PORTA, 1, 0);	/* SPI0_MOSI */
-	at91_set_b_periph(AT91_PIO_PORTA, 2, 0);	/* SPI0_SPCK */
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 5, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_b_periph(AT91_PIO_PORTA, 4, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_b_periph(AT91_PIO_PORTB, 11, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 5, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 3, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 4, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 11, 1);
-	}
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 13, 0);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* SPI1_SPCK */
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 15, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 16, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 18, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 15, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 16, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
-	}
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTE, 21, 0);	/* ETXCK_EREFCK */
-	at91_set_b_periph(AT91_PIO_PORTC, 25, 0);	/* ERXDV */
-	at91_set_a_periph(AT91_PIO_PORTE, 25, 0);	/* ERX0 */
-	at91_set_a_periph(AT91_PIO_PORTE, 26, 0);	/* ERX1 */
-	at91_set_a_periph(AT91_PIO_PORTE, 27, 0);	/* ERXER */
-	at91_set_a_periph(AT91_PIO_PORTE, 28, 0);	/* ETXEN */
-	at91_set_a_periph(AT91_PIO_PORTE, 23, 0);	/* ETX0 */
-	at91_set_a_periph(AT91_PIO_PORTE, 24, 0);	/* ETX1 */
-	at91_set_a_periph(AT91_PIO_PORTE, 30, 0);	/* EMDIO */
-	at91_set_a_periph(AT91_PIO_PORTE, 29, 0);	/* EMDC */
-
-#ifndef CONFIG_RMII
-	at91_set_a_periph(AT91_PIO_PORTE, 22, 0);	/* ECRS */
-	at91_set_b_periph(AT91_PIO_PORTC, 26, 0);	/* ECOL */
-	at91_set_b_periph(AT91_PIO_PORTC, 22, 0);	/* ERX2 */
-	at91_set_b_periph(AT91_PIO_PORTC, 23, 0);	/* ERX3 */
-	at91_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ERXCK */
-	at91_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ETX2 */
-	at91_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ETX3 */
-	at91_set_b_periph(AT91_PIO_PORTC, 24, 0);	/* ETXER */
-#endif
-}
-#endif
-
-#ifdef CONFIG_USB_OHCI_NEW
-void at91_uhp_hw_init(void)
-{
-	/* Enable VBus on UHP ports */
-	at91_set_pio_output(AT91_PIO_PORTA, 21, 0);
-	at91_set_pio_output(AT91_PIO_PORTA, 24, 0);
-}
-#endif
-
-#ifdef CONFIG_AT91_CAN
-void at91_can_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* CAN_TX */
-	at91_set_a_periph(AT91_PIO_PORTA, 14, 1);	/* CAN_RX */
-
-	/* Enable clock */
-	writel(1 << ATMEL_ID_CAN, &pmc->pcer);
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 19, 1);	/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTB, 18, 0);	/* RXD0 */
-	writel(1 << AT91SAM9G45_ID_US0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 4, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTB, 5, 0);		/* RXD1 */
-	writel(1 << AT91SAM9G45_ID_US1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTD, 6, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTD, 7, 0);		/* RXD2 */
-	writel(1 << AT91SAM9G45_ID_US2, &pmc->pcer);
-}
-
-void at91_serial3_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 12, 0);	/* DRXD */
-	at91_set_a_periph(AT91_PIO_PORTB, 13, 1);	/* DTXD */
-	writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-	at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
-	at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
-	at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3	/* DBGU */
-	at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_ATMEL_SPI
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* SPI0_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* SPI0_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* SPI0_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91SAM9G45_ID_SPI0, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 3, 0);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTB, 18, 0);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_b_periph(AT91_PIO_PORTB, 19, 0);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_b_periph(AT91_PIO_PORTD, 27, 0);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 3, 0);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 18, 0);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 19, 0);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 27, 0);
-	}
-}
-
-void at91_spi1_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTB, 14, 0);	/* SPI1_MISO */
-	at91_set_a_periph(AT91_PIO_PORTB, 15, 0);	/* SPI1_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTB, 16, 0);	/* SPI1_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91SAM9G45_ID_SPI1, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTB, 17, 0);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTD, 28, 0);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_a_periph(AT91_PIO_PORTD, 18, 0);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_a_periph(AT91_PIO_PORTD, 19, 0);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 17, 0);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 18, 0);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 19, 0);
-	}
-
-}
-#endif
-
-#ifdef CONFIG_MACB
-void at91_macb_hw_init(void)
-{
-	at91_set_a_periph(AT91_PIO_PORTA, 17, 0);	/* ETXCK_EREFCK */
-	at91_set_a_periph(AT91_PIO_PORTA, 15, 0);	/* ERXDV */
-	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* ERX0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* ERX1 */
-	at91_set_a_periph(AT91_PIO_PORTA, 16, 0);	/* ERXER */
-	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);	/* ETXEN */
-	at91_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* ETX0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* ETX1 */
-	at91_set_a_periph(AT91_PIO_PORTA, 19, 0);	/* EMDIO */
-	at91_set_a_periph(AT91_PIO_PORTA, 18, 0);	/* EMDC */
-#ifndef CONFIG_RMII
-	at91_set_b_periph(AT91_PIO_PORTA, 29, 0);	/* ECRS */
-	at91_set_b_periph(AT91_PIO_PORTA, 30, 0);	/* ECOL */
-	at91_set_b_periph(AT91_PIO_PORTA, 8,  0);	/* ERX2 */
-	at91_set_b_periph(AT91_PIO_PORTA, 9,  0);	/* ERX3 */
-	at91_set_b_periph(AT91_PIO_PORTA, 28, 0);	/* ERXCK */
-	at91_set_b_periph(AT91_PIO_PORTA, 6,  0);	/* ETX2 */
-	at91_set_b_periph(AT91_PIO_PORTA, 7,  0);	/* ETX3 */
-	at91_set_b_periph(AT91_PIO_PORTA, 27, 0);	/* ETXER */
-#endif
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-
-void at91_serial0_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 6, 1);		/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 7, 0);		/* RXD0 */
-	writel(1 << AT91SAM9RL_ID_US0, &pmc->pcer);
-}
-
-void at91_serial1_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 11, 1);		/* TXD1 */
-	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);		/* RXD1 */
-	writel(1 << AT91SAM9RL_ID_US1, &pmc->pcer);
-}
-
-void at91_serial2_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 13, 1);		/* TXD2 */
-	at91_set_a_periph(AT91_PIO_PORTA, 14, 0);		/* RXD2 */
-	writel(1 << AT91SAM9RL_ID_US2, &pmc->pcer);
-}
-
-void at91_serial3_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 21, 0);		/* DRXD */
-	at91_set_a_periph(AT91_PIO_PORTA, 22, 1);		/* DTXD */
-	writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-	at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
-	at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
-	at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3	/* DBGU */
-	at91_serial3_hw_init();
-#endif
-}
-
-#ifdef CONFIG_HAS_DATAFLASH
-void at91_spi0_hw_init(unsigned long cs_mask)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
-
-	at91_set_a_periph(AT91_PIO_PORTA, 25, 0);	/* SPI0_MISO */
-	at91_set_a_periph(AT91_PIO_PORTA, 26, 0);	/* SPI0_MOSI */
-	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* SPI0_SPCK */
-
-	/* Enable clock */
-	writel(1 << AT91SAM9RL_ID_SPI, &pmc->pcer);
-
-	if (cs_mask & (1 << 0)) {
-		at91_set_a_periph(AT91_PIO_PORTA, 28, 1);
-	}
-	if (cs_mask & (1 << 1)) {
-		at91_set_b_periph(AT91_PIO_PORTB, 7, 1);
-	}
-	if (cs_mask & (1 << 2)) {
-		at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
-	}
-	if (cs_mask & (1 << 3)) {
-		at91_set_b_periph(AT91_PIO_PORTD, 9, 1);
-	}
-	if (cs_mask & (1 << 4)) {
-		at91_set_pio_output(AT91_PIO_PORTA, 28, 1);
-	}
-	if (cs_mask & (1 << 5)) {
-		at91_set_pio_output(AT91_PIO_PORTB, 7, 1);
-	}
-	if (cs_mask & (1 << 6)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 8, 1);
-	}
-	if (cs_mask & (1 << 7)) {
-		at91_set_pio_output(AT91_PIO_PORTD, 9, 1);
-	}
-}
-#endif
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/cpu/arm926ejs/at91/clock.c
@@ -1,215 +0,0 @@
-/*
- * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/clk.h>
-
-#if !defined(CONFIG_AT91FAMILY)
-# error You need to define CONFIG_AT91FAMILY in your board config!
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned long get_cpu_clk_rate(void)
-{
-	return gd->cpu_clk_rate_hz;
-}
-
-unsigned long get_main_clk_rate(void)
-{
-	return gd->main_clk_rate_hz;
-}
-
-unsigned long get_mck_clk_rate(void)
-{
-	return gd->mck_rate_hz;
-}
-
-unsigned long get_plla_clk_rate(void)
-{
-	return gd->plla_rate_hz;
-}
-
-unsigned long get_pllb_clk_rate(void)
-{
-	return gd->pllb_rate_hz;
-}
-
-u32 get_pllb_init(void)
-{
-	return gd->at91_pllb_usb_init;
-}
-
-static unsigned long at91_css_to_rate(unsigned long css)
-{
-	switch (css) {
-	case AT91_PMC_MCKR_CSS_SLOW:
-		return CONFIG_SYS_AT91_SLOW_CLOCK;
-	case AT91_PMC_MCKR_CSS_MAIN:
-		return gd->main_clk_rate_hz;
-	case AT91_PMC_MCKR_CSS_PLLA:
-		return gd->plla_rate_hz;
-	case AT91_PMC_MCKR_CSS_PLLB:
-		return gd->pllb_rate_hz;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_USB_ATMEL
-static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
-{
-	unsigned i, div = 0, mul = 0, diff = 1 << 30;
-	unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
-
-	/* PLL output max 240 MHz (or 180 MHz per errata) */
-	if (out_freq > 240000000)
-		goto fail;
-
-	for (i = 1; i < 256; i++) {
-		int diff1;
-		unsigned input, mul1;
-
-		/*
-		 * PLL input between 1MHz and 32MHz per spec, but lower
-		 * frequences seem necessary in some cases so allow 100K.
-		 * Warning: some newer products need 2MHz min.
-		 */
-		input = main_freq / i;
-#if defined(CONFIG_AT91SAM9G20)
-		if (input < 2000000)
-			continue;
-#endif
-		if (input < 100000)
-			continue;
-		if (input > 32000000)
-			continue;
-
-		mul1 = out_freq / input;
-#if defined(CONFIG_AT91SAM9G20)
-		if (mul > 63)
-			continue;
-#endif
-		if (mul1 > 2048)
-			continue;
-		if (mul1 < 2)
-			goto fail;
-
-		diff1 = out_freq - input * mul1;
-		if (diff1 < 0)
-			diff1 = -diff1;
-		if (diff > diff1) {
-			diff = diff1;
-			div = i;
-			mul = mul1;
-			if (diff == 0)
-				break;
-		}
-	}
-	if (i == 256 && diff > (out_freq >> 5))
-		goto fail;
-	return ret | ((mul - 1) << 16) | div;
-fail:
-	return 0;
-}
-#endif
-
-static u32 at91_pll_rate(u32 freq, u32 reg)
-{
-	unsigned mul, div;
-
-	div = reg & 0xff;
-	mul = (reg >> 16) & 0x7ff;
-	if (div && mul) {
-		freq /= div;
-		freq *= mul + 1;
-	} else
-		freq = 0;
-
-	return freq;
-}
-
-int at91_clock_init(unsigned long main_clock)
-{
-	unsigned freq, mckr;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
-	unsigned tmp;
-	/*
-	 * When the bootloader initialized the main oscillator correctly,
-	 * there's no problem using the cycle counter.  But if it didn't,
-	 * or when using oscillator bypass mode, we must be told the speed
-	 * of the main clock.
-	 */
-	if (!main_clock) {
-		do {
-			tmp = readl(&pmc->mcfr);
-		} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
-		tmp &= AT91_PMC_MCFR_MAINF_MASK;
-		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
-	}
-#endif
-	gd->main_clk_rate_hz = main_clock;
-
-	/* report if PLLA is more than mildly overclocked */
-	gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
-
-#ifdef CONFIG_USB_ATMEL
-	/*
-	 * USB clock init:  choose 48 MHz PLLB value,
-	 * disable 48MHz clock during usb peripheral suspend.
-	 *
-	 * REVISIT:  assumes MCK doesn't derive from PLLB!
-	 */
-	gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
-			     AT91_PMC_PLLBR_USBDIV_2;
-	gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
-#endif
-
-	/*
-	 * MCK and CPU derive from one of those primary clocks.
-	 * For now, assume this parentage won't change.
-	 */
-	mckr = readl(&pmc->mckr);
-#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
-	/* plla divisor by 2 */
-	gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
-#endif
-	gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
-	freq = gd->mck_rate_hz;
-
-	freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2));	/* prescale */
-#if defined(CONFIG_AT91RM9200)
-	/* mdiv */
-	gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-#elif defined(CONFIG_AT91SAM9G20)
-	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
-	gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
-		freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
-	if (mckr & AT91_PMC_MCKR_MDIV_MASK)
-		freq /= 2;			/* processor clock division */
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
-	gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
-		(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
-		? freq / 3
-		: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-#else
-	gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-#endif
-	gd->cpu_clk_rate_hz = freq;
-
-	return 0;
-}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Wolfgang Denk	f20393c5e7	Prepare v2009.11.1 Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>	2010-01-25 09:35:12 +01:00
Stefan Roese	580ca3c2b1	ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration A newer CPLD version on the 405EX evaluation board requires a different EBC controller setup for the CPLD register access. This patch adds a CPLD version detection for Kilauea and code to reconfigure the EBC controller (chip select 2) for the old CPLD if no new version is found. Additionally the CPLD version is printed upon bootup: Board: Kilauea - AMCC PPC405EX Evaluation Board (CPLD rev. 0) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Cc: Zhang Bao Quan <bqzhang@udtech.com.cn>	2010-01-23 17:54:03 +01:00
Felix Radensky	eb20392ca9	ppc4xx: Fix sending type 1 PCI transactions The list of 4xx SoCs that should send type 1 PCI transactions is not defined correctly. As a result PCI-PCI bridges and devices behind them are not identified. The following 4xx variants should send type 1 transactions: 440GX, 440GP, 440SP, 440SPE, 460EX and 460GT. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>	2010-01-23 17:53:55 +01:00
Felix Radensky	57ab8a129d	ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs On platforms where SPD EEPROM and another EEPROM have adjacent I2C addresses SPD_EEPROM_ADDRESS should be defined as a single element array, otherwise DDR2 setup code would fail with the following error: ERROR: Unknown DIMM detected in slot 1 However, fixing SPD_EEPROM_ADDRESS would result in another error: ERROR: DIMM's DDR1 and DDR2 type can not be mixed. This happens because initdram() routine does not explicitly initialize dimm_populated array. This patch fixes the problem. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>	2010-01-23 17:53:22 +01:00
Felix Radensky	17ab3057bd	ppc4xx: Fix reporting of bootstrap options G and F on 460EX/GT Bootstrap options G and F are reported incorrectly (G instead of F and vice versa). This patch fixes this. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>	2010-01-23 17:53:11 +01:00