Under single core boot platform, the secondary cores won't enter the
u-boot spl. Therefore we move the pl2 driver from u-boot to the Opensbi.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Jimmy Ho <jimmy.ho@sifive.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested on HiFive Unleashed and HiFive Unmatched, both SPIFlash and MMC boot.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Enable firmware TPM (fTPM) support via OP-TEE for K3 platforms with
MMC hardware. This provides TPM 2.0 functionality through
Microsoft's fTPM Trusted Application running in OP-TEE secure world,
using eMMC RPMB as persistent storage.
fTPM support in U-Boot provides the foundation for measured boot
and disk encryption use cases.
The ARM64 condition ensures these apply only to A53/A72 cores and the
MMC condition ensures fTPM is enabled only on platforms with eMMC
hardware support.
Signed-off-by: Shiva Tripathi <s-tripathi1@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
* The symbol for the x86 architecture is CONFIG_X86 and not CONFIG_x86.
* Correct the description. The partition type is called MBR.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
We removed configuration symbol CONFIG_DM_PCI with
commit 3232bdf0b3 ("pci: Drop DM_PCI").
Don't select it for TARGET_POMELO.
Fixes: b9d0f00a9d ("arm: add initial support for the Phytium Pomelo Board")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com> says:
The disk_read() and disk_write() functions of the FAT driver use the
blk_dread() and blk_dwrite() respectively. The blk_* APIs read and write
to the devices in terms of the device block size. However, the FAT
driver reads in terms of the device block size (from fat_set_blk_dev and
read_bootsectandvi) and sector size in the rest of the places.
This causes buffer overflows or partial reads when the FAT sector size
is not equal to device block size. Fix this by using blk_dread in
fat_set_blk_dev and read_bootsectandvi instead of disk_read. And update
disk_read/disk_write to handle FAT sector size and block size mismatch.
Tested on
blksz | FAT sector size
------+----------------
4096 | 4096
512 | 512
4096 | 512
512 | 4096
CI test results
---------------
https://github.com/u-boot/u-boot/pull/871
All checks have passed
93 successful checks
No conflicts with base branch
Code size change info
---------------------
arm: (for 1/1 boards) all +32.0 text +32.0
qemu_arm : all +32 text +32
u-boot: add: 0/0, grow: 2/0 bytes: 24/0 (24)
function old new delta
read_bootsectandvi 420 432 +12
fat_set_blk_dev 204 216 +12
aarch64: (for 1/1 boards) all +12.0 rodata -8.0 text +20.0
qemu_arm64 : all +12 rodata -8 text +20
u-boot: add: 0/0, grow: 2/0 bytes: 20/0 (20)
function old new delta
read_bootsectandvi 408 420 +12
fat_set_blk_dev 204 212 +8
aarch64: (for 1/1 boards) all -2.0 data -8.0 rodata +6.0
qcom_qcs9100 : all -2 data -8 rodata +6
u-boot: add: 1/-1, grow: 8/-1 bytes: 708/-224 (484)
function old new delta
disk_rw - 628 +628
read_bootsectandvi 408 428 +20
fat_itr_root 500 520 +20
get_cluster 376 388 +12
set_contents 2076 2084 +8
fat_set_blk_dev 204 212 +8
static.set_fatent_value 536 540 +4
get_fatent 420 424 +4
fat_next_cluster 368 372 +4
disk_read 100 - -100
disk_write 132 8 -124
Link: https://lore.kernel.org/r/20260224035000.1617869-1-varadarajan.narayanan@oss.qualcomm.com
Enable FS_FAT_HANDLE_SECTOR_SIZE_MISMATCH to handle the different
combination of FAT sector size and device block size present in QCOM
platforms.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
The disk_read() and disk_write() functions of the FAT driver use the
blk_dread() and blk_dwrite() respectively. The blk_* APIs read and write
to the devices in terms of the device block size. However, the FAT
driver reads in terms of the device block size (from fat_set_blk_dev and
read_bootsectandvi) and sector size in the rest of the places.
This causes buffer overflows or partial reads when the FAT sector size
is not equal to device block size. Fix this by using blk_dread in
fat_set_blk_dev and read_bootsectandvi instead of disk_read. And update
disk_read/disk_write to handle FAT sector size and block size mismatch.
Tested on
blksz | FAT sector size
------+----------------
4096 | 4096
512 | 512
4096 | 512
512 | 4096
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Booting into SPL using ramboot can take several seconds on some SoCs due
to the large size of the usb472 payload sent over USB to BootROM.
A large chunk of the usb472 payload, around 1-2 MiB, is padding used to
avoid overlapping when loading e.g. TF-A to 0x40000.
BootROM is likely wasting unnecessary time crc16 validating the padding
of the payload.
Place the FIT payload directly after SPL and memmove it to the expected
memory location, SPL_LOAD_FIT_ADDRESS, to avoid excessive padding and
help speed up ramboot.
Binman symbols are used to get the position and size of the FIT payload
that is initially loaded into DRAM by the BootROM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The ATAGS set by Rockchip DDR init blob[1] specify DRAM banks above the
first addressable 4GiB which we haven't done in the mem_map for RK3588
yet.
For 4GiB DRAM, the 256MiB missing from the first addressable 4GiB (due
to MMIO) are accessible at the end of the 8GiB address space. For 8GiB,
4-8GiB address space is used for the additional 4GiB and the missing
256MiB are at the end of 12GiB address space. For 12, 4-12GiB and the
missing 256MiB at the end of 20GiB address space. For 16GiB, 4-~16GiB
with two holes (reasons unknown) around 16GiB and the missing 256MiB is
at the end of 20GiB address space. For 32GiB, 4-16~GiB with two holes
and then 16GiB to 32GiB address space (so likely missing 256MiB from
MMIO address space).
[1] https://gist.github.com/Kwiboo/1c020d37e3adbc9d0d79dc003d921977
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Rockchip RK3506 is a ARM-based SoC with tri-core Cortex-A7.
Add initial arch support for the RK3506 SoC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Mattijs Korpershoek <mkorpershoek@kernel.org> # drivers/usb/gadget
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Rockchip RK3506 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add initial support for the RK3506 GMAC variant.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add support for the OTP controller in RK3506. The OTPC is similar to the
OTPC in RK3568 and can use the same ops for reading OTP data.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add pinctrl driver for RK3506.
Imported from vendor U-Boot linux-6.1-stan-rkr6 tag with adjustments
to use regmap_update_bits().
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Aaron Griffith <aargri@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add clock driver for RK3506.
Imported from vendor U-Boot linux-6.1-stan-rkr6 tag with minor
adjustments and fixes for mainline.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The first RK35xx SoC was initially appended to the end of the otherwise
alphanumerically sorted spl_infos list, possible because it was using a
new header structure.
Re-sort the spl_infos list to keep it alphanumerically ordered based
on imagename.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Multiple newer Rockchip SoCs report 0x81 instead of 0xa when booting
from USB, i.e. on RK3576, RK3528, RK3506 and RV1106.
Move the bootsource_id 0x81 handling currently only used for RK3528 to
the common read_brom_bootsource_id() to reduce the need to override this
function when support for newer SoCs is introduced.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The rk3288 power-controller node contains an assigned-clocks property
that conflicts with the bindings. From the git history it shows that they
wanted to assign the rk3288 EDP_24M clock input centrally before an edp
node was available. Move the edp assigned-clocks property to the edp node
to reduce dtbs_check output.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/7d6fa223-ab90-4c44-9180-54df78467ea5@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 10712ce694a67304a99dbba20f8cb146ca5f4fd6 ]
(cherry picked from commit e1b4137b6bbc9998b13cde2eba0655cfdd358c69)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The u-boot,spl-boot-order property requires a label at a boot
device node. In order to migrate to OF_UPSTREAM more easier
add a spi_flash label to the rk3288-veyron.dtsi file.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://patch.msgid.link/8a423a6f-bfdc-4947-aef9-35ee7c4f6ca2@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: ac7116a626e00d3024adedb43b74bdf2ce45efc2 ]
(cherry picked from commit 38e6f7cd300f66cc9f657cd0e8881a01acc664d0)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi Zero2 is a small single board computer developed by
FriendlyElec, based on the Rockchip RK3528A SoC.
Add support for the FriendlyElec NanoPi Zero2 board.
Features tested on a FriendlyElec NanoPi Zero2 2407:
- SD-card boot
- eMMC boot
- Ethernet
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tiger suffers from eMMC signal integrity issues which means we can only
run it at HS200 max.
The Device Tree has these properties removed since v6.18 (commit
baa18d577cd4 ("arm64: dts: rockchip: disable HS400 on RK3588 Tiger")),
which has now merged in U-Boot.
Since the controller side doesn't support HS400 anymore, let's not
confuse users as to why HS400 is enabled in the config but not working
as we know it cannot work (and won't be used anyway since the controller
doesn't advertise support for it in the Device Tree).
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Enable use of DMA when loading FIT images from eMMC, SD-card and SPI
flash now that access to PMU_SRAM for non-secure masters is allowed.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The firewall block access to pmu sram for non-secure masters by default
after reset (0xffffbfff).
Change the pmu lookup configuration to match the default lookup config
for ddr and system sram (0xffff3fff) to allow loading TF-A using DMA.
Mainline TF-A will re-configure the firewall to use an even less
restrictive lookup (0xbffe3ff0), so this change is not expected to have
any real security implication.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Alexey Charkov <alchark@gmail.com> # UFS
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add Kconfig option OF_SYSTEM_SETUP=y to support booting ROCK 5C Lite
boards with a RK3582 SoC. CPU and GPU cores are failed based on ip-state
and policy.
Tested on a ROCK 5C Lite v1.1:
cpu-code: 35 82
ip-state: 00 80 00 (otp)
ip-state: c0 9e 04 (policy)
remove cpu-map cluster2
fail gpu
fail rkvdec1
fail rkvenc1
fail cpu cpu@600
fail cpu cpu@700
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The a53_0 clock properties are already set correctly in their
common k3-<soc>-r5.dtsi includes. Stop overriding them in
the r5 board device trees.
Fixes the following error message:
Failed to set clock rates for '/a53@0': -61
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Anshul Dalal <anshuld@ti.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Verdin AM62 Solo
Reviewed-by: Bryan Brattlof <bb@ti.com>
Convert a duplicate dtbs recipe into a dependency in the main Makefile.
Another recipe is already defined on line 2369, so we are getting
spurious warnings like:
Makefile:2369: warning: overriding recipe for target 'dtbs'
Makefile:1425: warning: ignoring old recipe for target 'dtbs'
The removed recipe was a no-op anyway so can be safely removed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
The hashed-nodes property in a FIT signature node lists which FDT paths
are included in the signature hash. It is intended as a hint so should
not be used for verification.
Add a function to build the node list from scratch by iterating the
configuration's image references. Skip properties known not to be image
references. For each image, collect the path plus all hash and cipher
subnodes.
Use the new function in fit_config_check_sig() instead of reading
'hashed-nodes'.
Update the test_vboot kernel@ test case: fit_check_sign now catches the
attack at signature-verification time (the @-suffixed node is hashed
instead of the real one, causing a mismatch) rather than at
fit_check_format() time.
Update the docs to cover this. The FIT spec can be updated separately.
Signed-off-by: Simon Glass <simon.glass@canonical.com>
Closes: https://lore.kernel.org/u-boot/20260302220937.3682128-1-trini@konsulko.com/
Reported-by: Apple Security Engineering and Architecture (SEAR)
Tested-by: Tom Rini <trini@konsulko.com>
The PCIe0 instance of PCIe on the J722S SoC uses the 4 GB Address Window
starting from 0x6_0000_0000 to map System Addresses to PCIe Bus Addresses.
Hence, enable CONFIG_SYS_PCI_64BIT.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Fixes: 79f3e77133 ("Subtree merge tag 'v6.16-dts' of dts repo [1] into dts/upstream")
The PCIe1 instance of PCIe on the J7200 SoC uses the 4 GB Address Window
starting from 0x41_0000_0000 to map System Addresses to PCIe Bus Addresses.
Hence, enable CONFIG_SYS_PCI_64BIT.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Fixes: 79f3e77133 ("Subtree merge tag 'v6.16-dts' of dts repo [1] into dts/upstream")
The PCIe0 instance of PCIe on the AM64x SoC uses the 4 GB Address Window
starting from 0x6_0000_0000 to map System Addresses to PCIe Bus Addresses.
Hence, enable CONFIG_SYS_PCI_64BIT.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Fixes: 79f3e77133 ("Subtree merge tag 'v6.16-dts' of dts repo [1] into dts/upstream")
